Clifton A
4
Clifton A. Adams 711 4 th St. San Leon TX. 77539 (832) 340-0932 [email protected] EDUCATION U.S.N. Basic Electricity and Electronics, and Aviation Electronics schools. N.A.S.A. Micro Circuitry Repair schools, Honeywell UDC-500, DCP-7700, TDC-2000, TDC-3000 Maintenance, Holcroft Carbcon Maintenance classes, Multi-Amp Basic and Advanced Protective Relaying school, Woodward Governor 43027 classes, IRD Vibration System Maintenance classes, I.S.A. “Super Tech” course completion, Certificate of Completion of 12 ISA Basic and Advanced Instrumentation Courses, NCCER Certified Instrument Technician. SPECIAL SKILLS Thirty years’ experience as a working I and E Superintendent. Excellent Understanding of P.I.P. Instrument and Electrical Installation Standards. Excellent understanding of Shell Instrument and Electrical Installation Standards. Excellent understanding of process controls, ability to spot design deficiencies and correct same. I have designed industrial instrument and electrical systems, generated loop sheet, schematic diagrams, wiring diagrams, P&ID’s, conduit lay outs, material take offs, and Man Hour estimates. I am familiar with S.A.P. I can take an industrial I/E project from start to finish. PERSONAL U.S. Citizen, current Passport and T.W.I.C. Card, Married. I am in good health. Experience
Transcript of Clifton A
Clifton A. Adams
711 4th St. San Leon TX. 77539
(832) 340-0932 [email protected]
EDUCATION
U.S.N. Basic Electricity and Electronics, and Aviation Electronics schools. N.A.S.A. Micro Circuitry Repair schools, Honeywell UDC-500, DCP-7700, TDC-2000, TDC-3000 Maintenance, Holcroft Carbcon Maintenance classes, Multi-Amp Basic and Advanced Protective Relaying school, Woodward Governor 43027 classes, IRD Vibration System Maintenance classes, I.S.A. “Super Tech” course completion, Certificate of Completion of 12 ISA Basic and Advanced Instrumentation Courses, NCCER Certified Instrument Technician.
SPECIAL SKILLS
Thirty years’ experience as a working I and E Superintendent. Excellent Understanding of P.I.P. Instrument and Electrical Installation Standards. Excellent understanding of Shell Instrument and Electrical Installation Standards. Excellent understanding of process controls, ability to spot design deficiencies and correct same. I have designed industrial instrument and electrical systems, generated loop sheet, schematic diagrams, wiring diagrams, P&ID’s, conduit lay outs, material take offs, and Man Hour estimates. I am familiar with S.A.P. I can take an industrial I/E project from start to finish.
PERSONAL
U.S. Citizen, current Passport and T.W.I.C. Card, Married. I am in good health.
Experience
Key Industrial Specialists Nov. 2013 to present.
Title: Instrument and Electrical Inspector at Lubrizol LLC Houston TX.
Duties: Inspection for adherence to P.I.P. and N.F.P.A. 70 Instrument and Electrical systems installation standards of new projects at Lubrizol LLC (Houston). Ensure correct Installation of Emerson Delta V. CHARMS, M and S series D.C.S. I also witnessed loop checks, grounding testing, F.A.T. of Delta V cabinets and V.F.D.’s. and wrote test and outage procedures.
Polaris Engineering Oct 2012- May 2013.
Title: Electrical and Instrument Superintendent.
Duties: Coordinate and direct electrical and instrument subcontractors in constructing a 4 megawatt Gas turbine and H.R.S.G. Co-generation plant with a 20 thousand gallon propane LPG storage facility. I identified and field corrected design errors, and started up various subsystems (R.O. Plant, Boiler Controls, C.E.M.S., Gas and Fire Detection, Electrical substation, L.P.G. Gasification and Flow controls etc..) as well as the turbine and L.P.G. Storage plants.
Merit Electrical Inc. June 2012-Sept. 2012
Title: Site Supervisor at Hovensa LLC.
Duties: Site Supervisor over Civil, Piping, Electrical and Instrumentation for the installation of a multi-pump oily water lift station. I designed the level control system, and ensured the subcontractors met N.E.C. cl. 1 div. 1 and 2 (Electrical) and class B piping requirements to complete the installation.
Pinnacle Services LLC at Hovensa LLC, Oct. 2011-April 2012. (Refinery closed)
Title: Construction Coordinator
Duties: Provide coordination and management of project Electrical and Instrument personnel between Refinery Operations, and projects Piping and Civil departments to ensure client and contractor Safety and Environmental requirements were met, and assist the Projects Manager in improving constructability. I reviewed the E/I drawings from FEL 3 through IFC, and improved productivity by ensuring schedules were met, and by removing barriers in work practices that inhibited the success of the project or Turn Around activity.
Turner St. Croix Maintenance LLC. June 2011-Oct. 2011
Title: E/I Supervisor.
Duties: Supervise Instrument Techs, Fitters, and Electricians on major and minor new construction and equipment updates at Hovensa LLC.
Rhodes Inspection LLC. Jan. – March 2010.
Title: Instrument and Electrical Inspector.
Duties: I wrote the testing procedure and certified the operation of 24 OSHA required Unit Shutdown Emergency isolation Systems throughout the Hovensa F.C.C. Unit and ensured the systems were installed to N.E.C. and Hovensa standards for new construction and craftsmanship.
Triangle and C&C Construction LLC. April 1994 -Oct. 2009.
Title: Capital Projects Group Electrical and Instrument Superintendent.
Duties: Supervise Electricians, Instrument Tech, and Fitters on major and minor new construction and equipment upgrades in all units at Hovensa LLC. I planned manpower requirements and scheduling, made material take offs, generated material requisitions, specified instruments, designed interlocks, generated loop sheets, wiring diagrams, and specification sheets. I wrote test procedures and trained operations personnel to use new systems. I participated at PHA, PSSR, and PSM meetings.
