Client Server Architecture and PAT
-
Upload
raj-rajeshwar-singh-rathore -
Category
Engineering
-
view
249 -
download
2
Transcript of Client Server Architecture and PAT
CLIENT SERVER ARCHITECTURE AND PAT
MADE BY :
RAJ RAJESHWAR SINGH RATHORE
1031230162
CSE-B
1
Submitted to :MRS. MONIKA JOHRI
INTRODUCTION
The project is about a
company whose
headquarter is located inside a
five story building with
each floor allotted to different
departments.
The basic configurations
performed are :
IP Addressin
g
Hostname, Banner, Password
etc.
RIP Routing
Server – HTTP, DNS
& DHCPPAT
Bri
dg
es
A bridge is basically a simplified two-port switch. It does not have VLAN or trunking functions. The available settings for its two Ethernet ports are Port Status, Bandwidth, and Duplex.
Rep
eate
rs
A repeater is a simple two-port device that regenerates the signal it receives on one port and forwards it out the other port. Its port settings cannot be modified.
HubsA hub is a multiport repeater that regenerates the signal it receives on one port and forwards it out all other ports except the incoming port. Its port settings cannot be modified.
Coaxial Splitter
A coaxial splitter is a simple three-port device that splits the signal so that multiple devices can connect to the same coaxial line.
Cisco routerA CISCO router is a device that forwards
data packets between computer networks, creating an overlay internetwork . A router is connected to two or more data lines from different networks. Router is a device which is use to connect two or more different
networks.
Router is an internetworking component, that connects networks which are at different geographical
locations.
User Mode (Default mode)
Privilege or Administrative Mode
Global Configuration Mode
Interface Configuration Mode
Line Configuration Mode
Router Mode
Sub-Interface
Mode
Modes of
router
IP ADDRESSING
A Large NHHH 0-127
B Medium NNHH 128-191
C Small NNNH192-223
D Multicasting224-239
E Experimental240-255
7
CLASSES :
ROUTING INFORMATION PROTOCOLIt is a
Distance Vector
Routing Protocol Uses HOP
Metric
Supports MAX 15 routers
Has a A.D. value of
120
Types : Version 1
and Version 2
Uses Bellman
Ford Algorithm
SERVER
• Disk drives (file servers)• Printers (print servers) • Network traffic (network servers)
Computers or processes that
manage network resources
• A computer system that processes database queries
Example: Database Server
DHCP SERVICE
• In the DHCP service configuration, we can set up a DHCP server with many different IP address pools. To add a DHCP pool, enter the
• Pool Name• Default Gateway• DNS Server address• Starting IP address to lease• Subnet Mask, and • Maximum number of Users
12
DNS Service Configuration
In the DNS
service
configuration
, you can set
up a DNS
server to
translate
domain
names with
different
types of
resource
records
To add a resource record :
Enter the
Name of the
resource
record
Select a Type of resource
record, and
Then enter all required
fields pertaining to the resource record such as
Address for A
Record
Add
NETWORK ADDRESS TRANSLATION [NAT]
Types :• Static • Dynamic
It is used to translate :• Public IP >> Private IP• Private IP >> Public IP
Global
Local
Static NATDynamic
NAT
• The Public IP address physically or logically assigned to device.
• The IP address physically or logically assigned to device.
• A manual address translation is performed between two addresses and possibly port number.
• An address translation device auto perform address translation between two addresses and possibly port number.
Port address translationMany inside IP addresses are converted to a single IP address where each inside address is given a different TCP or UDP port number for uniqueness.
REFRENCES
Source : https://www.youtube.com
(channels : cisco, networking, networkdoctor, CCNA series-84 )
Source : http://www.packettracernetwork.com
Source : http://www.nwking.org
Source : http://www.cisco.com
The Study material provided by the MTA Centre (Noida) and Shadas Sir