Click on the Normal View icon located in the lower left hand corner of your screen to read the...

22
Identify Characteristics of the Identify Characteristics of the M68 CCO M68 CCO Perform PMCS on the M68 CCO Perform PMCS on the M68 CCO Put the M68 CCO into Operation Put the M68 CCO into Operation Zero the M68 CCO Zero the M68 CCO Bore Sight Bore Sight Zeroed Weapon Zeroed Weapon Unzeroed Weapon Unzeroed Weapon Qualify with the M68 CCO Qualify with the M68 CCO Basic Marksmanship Basic Marksmanship PREFACE PREFACE ide this slide during your presentation ide this slide during your presentation

Transcript of Click on the Normal View icon located in the lower left hand corner of your screen to read the...

Identify Characteristics of the M68 CCOIdentify Characteristics of the M68 CCO

Perform PMCS on the M68 CCOPerform PMCS on the M68 CCO

Put the M68 CCO into OperationPut the M68 CCO into Operation

Zero the M68 CCOZero the M68 CCO•Bore SightBore Sight

•Zeroed WeaponZeroed Weapon

•Unzeroed WeaponUnzeroed Weapon

Qualify with the M68 CCOQualify with the M68 CCO

Basic MarksmanshipBasic Marksmanship

PREFACEPREFACE

Hide this slide during your presentation Hide this slide during your presentation

M68 Close Combat OpticM68 Close Combat OpticIdentify Characteristics of the M68 CCOIdentify Characteristics of the M68 CCO

Perform PMCS on the M68 CCOPerform PMCS on the M68 CCO

Put the M68 CCO into OperationPut the M68 CCO into Operation

Zero the M68 CCOZero the M68 CCO•Bore SightBore Sight

•Zeroed WeaponZeroed Weapon

•Unzeroed WeaponUnzeroed Weapon

Qualify with the M68 CCOQualify with the M68 CCO

Basic MarksmanshipBasic Marksmanship

Description : Electrical Red Dot sight for the M16/M4 series weapons

Optic: 100% Parallax Free, Anti-Reflective Coated Lens System (BEYOND 50 METERS)

Length: 10.24 inches (260mm) with Mount

Weight: 6.2 oz (175g)

Battery Life: 3-20 Days

M68 CCO CharacteristicsM68 CCO Characteristics

M68 CCO CharacteristicsM68 CCO Characteristics

REAR LENS COVERREAR LENS COVERREAR LENS COVERREAR LENS COVER

ELEVATION/ WINDAGEELEVATION/ WINDAGECAP AND SCREWCAP AND SCREW

ELEVATION/ WINDAGEELEVATION/ WINDAGECAP AND SCREWCAP AND SCREW

FRONT LENS COVERFRONT LENS COVERFRONT LENS COVERFRONT LENS COVER

ROTARY SWITCHROTARY SWITCHROTARY SWITCHROTARY SWITCH

TORQUE LIMITING KNOBTORQUE LIMITING KNOBTORQUE LIMITING KNOBTORQUE LIMITING KNOB

BATTERY BATTERY CAPCAP

BATTERY BATTERY CAPCAP

M16A1/A2 Adapter BracketM16A1/A2 Adapter Bracket

““Gooseneck”Gooseneck”

M16A1/A2 Adapter BracketM16A1/A2 Adapter Bracket

““Gooseneck”Gooseneck”

BATTERY BATTERY COMPARTMENTCOMPARTMENT

BATTERY BATTERY COMPARTMENTCOMPARTMENT

M68 CCO CharacteristicsM68 CCO Characteristics

Anti Reflective DeviceAnti Reflective Device(ARD)(ARD)

Anti Reflective DeviceAnti Reflective Device(ARD)(ARD)

BATTERY BATTERY ORIENTATIONORIENTATION

BATTERY BATTERY ORIENTATIONORIENTATION

The ARD reduces The ARD reduces reflection caused by reflection caused by the sun which may be the sun which may be seen by the enemy.seen by the enemy.

Suggested storage of lens covers while Suggested storage of lens covers while sight is in usesight is in use

Suggested storage of lens covers while Suggested storage of lens covers while sight is in usesight is in use

ThreadsThreadsThreadsThreadsThreads on the Threads on the

ARD and front of ARD and front of M68 allows easy M68 allows easy

installation of installation of the ARDthe ARD

M68 CCO CharacteristicsM68 CCO Characteristics

HAND TIGHTEN THE ARD TO THE M68 ONLY!HAND TIGHTEN THE ARD TO THE M68 ONLY!HAND TIGHTEN THE ARD TO THE M68 ONLY!HAND TIGHTEN THE ARD TO THE M68 ONLY!

RED DOT SIZE: RED DOT SIZE: 2.2 cm AT 25M 2.2 cm AT 25M 8.8 cm AT 100M8.8 cm AT 100M

26.4 cm AT 300M (9.75” AT 300M) 26.4 cm AT 300M (9.75” AT 300M)

RED DOT SIZE: RED DOT SIZE: 2.2 cm AT 25M 2.2 cm AT 25M 8.8 cm AT 100M8.8 cm AT 100M

26.4 cm AT 300M (9.75” AT 300M) 26.4 cm AT 300M (9.75” AT 300M)

26.4 cm (9.75 in)26.4 cm (9.75 in)

25 Meters 300 Meters

NOTE: THE HIGHER THE ROTARY SWITCH SETTING

THE BRIGHTER THE DOT

NOTE: THE HIGHER THE ROTARY SWITCH SETTING

THE BRIGHTER THE DOT

2.2 cm2.2 cm

M68 CCO CharacteristicsM68 CCO Characteristics

If the operator sees the red dot on the target and uses good If the operator sees the red dot on the target and uses good marksmanship techniques, the bullet will strike the target.marksmanship techniques, the bullet will strike the target.If the operator sees the red dot on the target and uses good If the operator sees the red dot on the target and uses good marksmanship techniques, the bullet will strike the target.marksmanship techniques, the bullet will strike the target.

Place the red dot on the target for a hit on the target.Place the red dot on the target for a hit on the target.Place the red dot on the target for a hit on the target.Place the red dot on the target for a hit on the target. Reflex (non-telescopic) sightReflex (non-telescopic) sight

No centering or focusing required BEYOND 50 METERS

Two eyes open method of sightingTwo eyes open method of sighting

M68 CCO Principals of Operation M68 CCO Principals of Operation

M68 CCO Principals of Operation M68 CCO Principals of Operation

WITHIN 50 METERSWITHIN 50 METERSWITHIN 50 METERSWITHIN 50 METERS

BEYOND 50 METERSBEYOND 50 METERSBEYOND 50 METERSBEYOND 50 METERS

Elevation AdjustmentsElevation AdjustmentsClockwise one clickClockwise one click

Down 4mm at 25 metersDown 4mm at 25 metersWindage AdjustmentsWindage AdjustmentsClockwise one clickClockwise one click

Left 4mm at 25 metersLeft 4mm at 25 meters

Windage and Elevation one click = 4mm at 25 metersWindage and Elevation one click = 4mm at 25 metersWindage and Elevation one click = 4mm at 25 metersWindage and Elevation one click = 4mm at 25 meters

M68 CCO Principals of Operation M68 CCO Principals of Operation

M68 CCO Principals of Operation M68 CCO Principals of Operation

NOTE: THE HIGHER THE ROTARY SWITCH SETTING THE BRIGHTER THE DOTNOTE: THE HIGHER THE ROTARY SWITCH SETTING THE BRIGHTER THE DOTNOTE: THE HIGHER THE ROTARY SWITCH SETTING THE BRIGHTER THE DOTNOTE: THE HIGHER THE ROTARY SWITCH SETTING THE BRIGHTER THE DOT

9.6 mm

9.6 mm13 mm

M16

13 mm

M4

1. Elevation (1 click @ 25m = 4mm) (clockwise = down)1. Elevation (1 click @ 25m = 4mm) (clockwise = down) 2. Windage (1 click @ 25m = 4mm) (clockwise = left) 2. Windage (1 click @ 25m = 4mm) (clockwise = left) 3. Sight picture = Red dot center mass3. Sight picture = Red dot center mass

1. Elevation (1 click @ 25m = 4mm) (clockwise = down)1. Elevation (1 click @ 25m = 4mm) (clockwise = down) 2. Windage (1 click @ 25m = 4mm) (clockwise = left) 2. Windage (1 click @ 25m = 4mm) (clockwise = left) 3. Sight picture = Red dot center mass3. Sight picture = Red dot center mass

NOTE: USE ONLY THE M16A2 ZERO TARGETNOTE: USE ONLY THE M16A2 ZERO TARGET

M68 CCO Principals of Operation M68 CCO Principals of Operation

M68 CCO Principals of Operation M68 CCO Principals of Operation

EMITS A LASEREMITS A LASER

DOES NOT EMIT A LASERDOES NOT EMIT A LASERDOES NOT EMIT A LASERDOES NOT EMIT A LASER

WARNINGWARNINGIF ROTARY SWITCH IS SET HIGHER THAN 3 IT CAN BE SEEN AT NIGHT.IF ROTARY SWITCH IS SET HIGHER THAN 3 IT CAN BE SEEN AT NIGHT.

WARNINGWARNINGIF ROTARY SWITCH IS SET HIGHER THAN 3 IT CAN BE SEEN AT NIGHT.IF ROTARY SWITCH IS SET HIGHER THAN 3 IT CAN BE SEEN AT NIGHT.

M68 CCO Principals of Operation M68 CCO Principals of Operation

M68 CCO Principals of Operation M68 CCO Principals of Operation

M68 CCO PMCSM68 CCO PMCS• INSPECT SIGHT:INSPECT SIGHT:

• INSPECT BATTERY CAP AND ADJUSTMENT CAPS INSPECT BATTERY CAP AND ADJUSTMENT CAPS - THREADS, O-RINGS AND BATTERY- THREADS, O-RINGS AND BATTERY

• ENSURE RED DOT IS VISIBLEENSURE RED DOT IS VISIBLE

• MOUNTING BRACKET MOUNTING BRACKET NOT DAMAGED/MISSING NOT DAMAGED/MISSING

• LENS COVERS LENS COVERS NOT CRACKED/MISSINGNOT CRACKED/MISSING

• INSPECT SIGHT:INSPECT SIGHT:

• INSPECT BATTERY CAP AND ADJUSTMENT CAPS INSPECT BATTERY CAP AND ADJUSTMENT CAPS - THREADS, O-RINGS AND BATTERY- THREADS, O-RINGS AND BATTERY

• ENSURE RED DOT IS VISIBLEENSURE RED DOT IS VISIBLE

• MOUNTING BRACKET MOUNTING BRACKET NOT DAMAGED/MISSING NOT DAMAGED/MISSING

• LENS COVERS LENS COVERS NOT CRACKED/MISSINGNOT CRACKED/MISSING

M68 CCO OPERATIONM68 CCO OPERATIONM68 CCO OPERATIONM68 CCO OPERATIONM16A2 MountingM16A2 Mounting

Hand tighten to carryinghandle only

Hand tighten to carryinghandle only

NO SPACER INSTALLEDNO SPACER INSTALLEDNO SPACER INSTALLEDNO SPACER INSTALLED

Rotary SwitchRotary SwitchRotary SwitchRotary Switch

M4/MWS use spacerM4/MWS use spacer M16A2 use no spacerM16A2 use no spacerM16A2 use no spacerM16A2 use no spacer

M4/MWS MountingM4/MWS MountingM4/MWS MountingM4/MWS MountingM68 CCO OPERATIONM68 CCO OPERATIONM68 CCO OPERATIONM68 CCO OPERATION

HAND TIGHTEN TORQUE LIMITING KNOB TWO CLICKSHAND TIGHTEN TORQUE LIMITING KNOB TWO CLICKS

Mount on same notchMount on same notchto maintain zeroto maintain zero

Mount on same notchMount on same notchto maintain zeroto maintain zero

M68 CCO BORE SIGHTINGM68 CCO BORE SIGHTINGM68 CCO BORE SIGHTINGM68 CCO BORE SIGHTING

1.1. Zero borelight to the weaponZero borelight to the weapon

2.2. Gunner gets into a stable firing Gunner gets into a stable firing position and, with both eyes position and, with both eyes open, aims the M68 CCO at the open, aims the M68 CCO at the crosshair.crosshair.

3.3. Target person will then give the Target person will then give the adjustments to be made to the adjustments to be made to the M68 CCO based off the strike M68 CCO based off the strike of the borelight laser. Borelight of the borelight laser. Borelight laser should fall within the laser should fall within the circle provided on offset.circle provided on offset.

4.4. M68 CCO adjustment: 1 click = M68 CCO adjustment: 1 click = 2mm at 10m (5clicks per 2mm at 10m (5clicks per square on 10m offset) square on 10m offset) Adjustment for example: right Adjustment for example: right 29, up 10.29, up 10.

M68 CCO ZEROING M68 CCO ZEROING (25 METER TARGET)(25 METER TARGET)

M68 CCO ZEROING M68 CCO ZEROING (25 METER TARGET)(25 METER TARGET)

DOWN 1.5 cmDOWN 1.5 cmDOWN 1.5 cmDOWN 1.5 cm

DRAW IMPACT ZONE ON THE TARGETDRAW IMPACT ZONE ON THE TARGETDRAW IMPACT ZONE ON THE TARGETDRAW IMPACT ZONE ON THE TARGET

AIM CENTER MASSAIM CENTER MASSAIM CENTER MASSAIM CENTER MASS

ROUNDS MUST STRIKE 1.5 ROUNDS MUST STRIKE 1.5 CM BELOW CENTER MASS.CM BELOW CENTER MASS.

1.1. Adjust red dot center top of the front sight Adjust red dot center top of the front sight postpost

2.2. Fire three rounds at 25 meters and triangulateFire three rounds at 25 meters and triangulate3.3. Retighten torque knobRetighten torque knob4.4. Shoot another three rounds and triangulateShoot another three rounds and triangulate5.5. Make adjustments and repeat steps 4 & 5 Make adjustments and repeat steps 4 & 5

until zeroeduntil zeroed

1.1. Adjust red dot center top of the front sight Adjust red dot center top of the front sight postpost

2.2. Fire three rounds at 25 meters and triangulateFire three rounds at 25 meters and triangulate3.3. Retighten torque knobRetighten torque knob4.4. Shoot another three rounds and triangulateShoot another three rounds and triangulate5.5. Make adjustments and repeat steps 4 & 5 Make adjustments and repeat steps 4 & 5

until zeroeduntil zeroed

M68 CCO ZEROING M68 CCO ZEROING ((Zeroed WeaponZeroed Weapon))

M68 CCO ZEROING M68 CCO ZEROING ((Zeroed WeaponZeroed Weapon))

M16 EXAMPLE = RIGHT 10 DOWN 9

M68 CCO ZEROING (Unzeroed Weapon)

M68 CCO ZEROING (Unzeroed Weapon)

M16 EXAMPLE = RIGHT 10 DOWN 9

1. Bore sight the weapon with the borelight2.2. Fire three rounds at 25 meters and triangulateFire three rounds at 25 meters and triangulate3.3. Retighten torque limiting knobRetighten torque limiting knob4.4. Shoot another three rounds and triangulateShoot another three rounds and triangulate5.5. Make adjustments and repeat steps 4 & 5 Make adjustments and repeat steps 4 & 5

until zeroeduntil zeroed

1. Bore sight the weapon with the borelight2.2. Fire three rounds at 25 meters and triangulateFire three rounds at 25 meters and triangulate3.3. Retighten torque limiting knobRetighten torque limiting knob4.4. Shoot another three rounds and triangulateShoot another three rounds and triangulate5.5. Make adjustments and repeat steps 4 & 5 Make adjustments and repeat steps 4 & 5

until zeroeduntil zeroed

M68 CCO ZEROING M68 CCO ZEROING (Back-up (Back-up Iron Sight)Iron Sight)

M68 CCO ZEROING M68 CCO ZEROING (Back-up (Back-up Iron Sight)Iron Sight)

NOTE: THE BACK-UP IRON NOTE: THE BACK-UP IRON SIGHT SHOULD ALREADY SIGHT SHOULD ALREADY BE ZEROED. IF NOT THE BE ZEROED. IF NOT THE BIS CAN BE BORESIGHTED BIS CAN BE BORESIGHTED USING THE BORLIGHT USING THE BORLIGHT LASER.LASER.

NOTE: THE BACK-UP IRON NOTE: THE BACK-UP IRON SIGHT SHOULD ALREADY SIGHT SHOULD ALREADY BE ZEROED. IF NOT THE BE ZEROED. IF NOT THE BIS CAN BE BORESIGHTED BIS CAN BE BORESIGHTED USING THE BORLIGHT USING THE BORLIGHT LASER.LASER.

ADJUST THE M68 CCO ADJUST THE M68 CCO UNTIL THE RED DOT IS UNTIL THE RED DOT IS CENTERED ON THE CENTERED ON THE FRONT SIGHT POST AND FRONT SIGHT POST AND CENTERED IN THE REAR CENTERED IN THE REAR SIGHT APERTURE. AFTER SIGHT APERTURE. AFTER RED DOT IS CENTERED RED DOT IS CENTERED FOLD BIS DOWN AND FOLD BIS DOWN AND DISREGARD FRONT SIGHT DISREGARD FRONT SIGHT POST WHEN FIRING.POST WHEN FIRING.

ADJUST THE M68 CCO ADJUST THE M68 CCO UNTIL THE RED DOT IS UNTIL THE RED DOT IS CENTERED ON THE CENTERED ON THE FRONT SIGHT POST AND FRONT SIGHT POST AND CENTERED IN THE REAR CENTERED IN THE REAR SIGHT APERTURE. AFTER SIGHT APERTURE. AFTER RED DOT IS CENTERED RED DOT IS CENTERED FOLD BIS DOWN AND FOLD BIS DOWN AND DISREGARD FRONT SIGHT DISREGARD FRONT SIGHT POST WHEN FIRING.POST WHEN FIRING.

M68 CCO QUALIFICATIONM68 CCO QUALIFICATIONM68 CCO QUALIFICATIONM68 CCO QUALIFICATION

QUALIFICATIONQUALIFICATION23 OUT OF 4023 OUT OF 40

QUALIFICATIONQUALIFICATION23 OUT OF 4023 OUT OF 40

PRACTICAL EXCERCISEPRACTICAL EXCERCISEPRACTICAL EXCERCISEPRACTICAL EXCERCISE

1.1. WALK THROUGH WALK THROUGH 2.2. PMCSPMCS3.3. MOUNTING PROCEDURESMOUNTING PROCEDURES4.4. AN/PEQ-2A OPERATIONAL PROCEDURESAN/PEQ-2A OPERATIONAL PROCEDURES

1.1. WALK THROUGH WALK THROUGH 2.2. PMCSPMCS3.3. MOUNTING PROCEDURESMOUNTING PROCEDURES4.4. AN/PEQ-2A OPERATIONAL PROCEDURESAN/PEQ-2A OPERATIONAL PROCEDURES

M68 CCO SUMMARYM68 CCO SUMMARYM68 CCO SUMMARYM68 CCO SUMMARY

SUMMARYSUMMARYQUESTIONSQUESTIONSSUMMARYSUMMARY

QUESTIONSQUESTIONS