Clear-Com_MS-704_RM-704_SB-704_Datasheet.pdf

download Clear-Com_MS-704_RM-704_SB-704_Datasheet.pdf

of 4

Transcript of Clear-Com_MS-704_RM-704_SB-704_Datasheet.pdf

  • 8/11/2019 Clear-Com_MS-704_RM-704_SB-704_Datasheet.pdf

    1/4

    The 704 series is Clear-Coms most advanced party-line intercomsystem. Each station is a four-channel intercom with superior audio

    and versatile channel access to provide unmatched communicationflexibility. All front-panel controls are intuitive and easy to operate.

    The stations front-panel buttons are programmable and can becustomized for a wide variety of applications that will meet thedemands of any stage, studio, or field producer. Separate volumecontrols for every channel ensure the perfect audio mix in theheadset or on the integral speaker.

    The SB-704 includes a versatile switching matrix which allows upto ten different groups of stations to be assigned to any one of thefour channels. The regulated power supply in the MS-704 andSB-704 provides power for the entire intercom system.

    SB-704 Main Station

    This station is similar to the MS-704 main station except the speakeris replaced by a 10 x 4 assignment matrix panel. The assignmentmatrix panel allows you to choose any intercom station or group ofstations connected to the ten inputs of the matrix and assign themto any one of the four intercom channels.

    RM-704 Remote Station

    The RM-704 remote station is powered directly from the intercomline and requires no external AC power, allowing it to be placedanywhere regardless of available electrical mains. The RM-704 hasall of the same functions as the MS-704, except that it has no powersupply, circuit breaker, or linking function.

    www.clearcom.com

    Features:

    Four Independent Intercom Channelsfor ultimate flexibility

    Microprocessor-Controlled Logicassures maximum communicationspower

    Universal Voltage Power Supply for100 - 240 VAC operation, with short-circuit protection on each channel

    Linking Control instantly links channelstogether in super party line

    SeparateTalk and Listen Buttonsfor each channel

    Individual Listen Volume Controlsfor each channel

    All-Talk Function permits instantcommunications to all four channels

    Four Separate Program Inputs areelectronically balanced

    Three Interruptible IFB Channelsmake talent cueing easy

    Announce Button with Relay for

    external paging Visual Call Signaling alerts users

    when others want to speak to them

    Wide-Range High-Output Speakerfor optimum clarity in all acousticenvironments

    Hot-Mic Output allows easyconnection to external IFBs

    Adjustable Mic ProximityCompensation reduces acousticfeedback

    Superior Contoured Audio insuresexcellent voice intelligibility under allnoise conditions, including high-noiseenvironments

    LED buttons for talk, call, announce,link, all talk, and mic on

    Remote Mic Kill switch turns off themicrophone talk circuits

    Clear-Com Encore TM

    MS-704, RM-704, SB-704 4-Channel Intercom Stations

    RM-704

    SB-704

    MS-704

  • 8/11/2019 Clear-Com_MS-704_RM-704_SB-704_Datasheet.pdf

    2/4

    1. Headset ConnectorXLR 4-pin male

    2. Panel Mic ConnectorAllows easy attachment of proprietary9" or 18" gooseneck microphone

    3. Mic on Switch/IndicatorBlue-color LED; button illuminates whenthe microphone is active.

    4. Mic Select SwitchSelects between the panel mounted

    gooseneck mic and the headset mic.

    5. Remote Mic KillAmber-color LED turns off the microphonetalk circuits of all Clear-Com beltpacks inthe system (MS-704 & SB-704) .

    6. Link ButtonAmber-color LED; links channels B, C,and/or D to Channel A.

    7. All Talk ButonAmber-color LED ; sends the station's micsignal to all four channels.

    8. Announce ButtonAmber-color LED; directs station's micsignal to dedicated rear-panel "announce"output while activating associated relay

    9. Call ButtonRed-color LED; Activates all stationand beltpack call lights on the respectiveintercom channel; also functions asattention-getting Call lights.

    10. Listen ButtonGreen-color LED; Turns on LISTENcircuit on corresponding channel.

    11. Talk Button

    Blue-color LED (on), amber-color LED(off); illuminated dual-action buttons lightup to indicate the on-off status of eachchannels TALK circuit.

    12. Volume ControlAdjusts the listening level for both speakerand headset.

    13. Speaker On/Off SwitchSelects or deselects the built-in speaker.

    14. LoudspeakerHigh-quality loudspeaker is driven by afour-watt proaudio amplifier.

    15. Short IndicatorsIlluminates when a short is detected on

    one or more of the lines while power willbe supplied to other channels.

    16. Panel Mic GainAdjusts the sensitivity of the gooseneckpanel mic.

    17.Sidetone AdjustControls the level of your voice as it isheard in your own headset and speaker.

    18. Program Interrupt Select (IFB)Selects which channel the programinterrupt will operate.

    19. Auto Call SelectSends a call signal automatically when the

    TALK button is depressed.

    20. Auto Talk/Listen SelectAllows the TALK and LISTEN circuit to beautomatically activated when the TALKbutton is depressed.

    21. Latch Disable SelectTALK button is momentary function only.

    22. Program LevelAdjusts the level of the Audio Programfeed to the station speaker.

    23. Program SelectDetermines which intercom channels theaudio program feed will be sent to.

    Headset

    Null PgmListen

    Channel B

    Null PgmListen

    Channel A

    Null PgmListen

    Channel C

    Null PgmListen

    Channel D

    B C DA

    Line

    Length

    Program

    Interrupt

    B C D

    Auto-Talk

    /Listen

    B C DA

    TalkLatch

    Disable

    B C DAHS

    Lim

    B C DA

    Auto-Call

    On

    Off

    Talk

    Listen

    Call

    Talk

    Listen

    Call

    Talk

    Listen

    Call

    Announce

    All Talk

    Link On

    Mic Select

    Panel

    Headset

    Mic On

    Panel Mic

    (On)

    Off

    (Dflt)

    Panel MicGain

    Ch. B

    Ch. A

    Ch. C

    Ch. D

    Short

    Long

    (Short)

    Program

    On/Off

    B C DA

    4-Channel

    Main Station

    MS-704

    Channel A Channel B Channel C Channel D

    Volume

    Speaker

    Sidetone

    Adjust ProgramLevel

    RemoteMic Kill

    1 2 3 4 31110198765 4121

    72625242322212029181716151

    24. Null ControlUsed in conjunction with line/link switch tominimize intercom channel crosstalk in station.

    25. Listen Level ControlAdjusts the listen level for each intercom channel.

    26. Program AdjustControls the level of program audio sent out to eachindividual channel.

    27. Line Length Select Dip Switch

    Compensates for electrical capacitance on eachindividual intercom channel to optimize null adjust.

    Matrix Assignment Switch(SB-704 only - not shown)Assigns an intercom station to any one of the fourchannels or to an off or party-line position.

    Superior Contoured AudioCompatible with all Clear-Com party-line

    intercoms, the 704 series accepts a wide range

    of dynamic headsets, with a choice of headset

    connectors. Optional plug-in noise-cancellinggooseneck microphones are available in 9 and

    18 lengths.

    Remote Mic Kill (RMK)The MS-704 is equipped with a global RMK

    button. It will turn off the microphone talk

    circuits of all Clear-Com beltpacks in the system,

    eliminating extraneous noise from the open

    headset microphones.

    www.clearcom.com

    Clear-Com Encore TM

    MS-704, RM-704, SB-704 4-Channel Intercom Stations

    MS-704 Front Panel Features

  • 8/11/2019 Clear-Com_MS-704_RM-704_SB-704_Datasheet.pdf

    3/4

    www.clearcom.com

    Clear-Com Encore TM

    MS-704, RM-704, SB-704 4-Channel Intercom Stations

    28 432303920392

    33 31

    Auxiliary

    Term

    On

    Off

    On

    Off

    Term

    On

    Off

    On

    Off

    Channel A

    Output: 30V, 1.2AContinuous, 2APeak

    ELECTRICSHOCKD O NOT

    FIRE OR SHOCK HAZARD DO NOTEXPOSE THIS EQUIPMENT TO RAIN

    TO PREVENT

    WARNING:

    OR MOISTURE.

    CAUTION:

    REMOVE COVER. NO USER

    SERVICEABLE PARTS INSIDE.

    REFERTOQUALIFIED SERVICE

    PERSONNEL.

    MS-704

    HotMic/IFB

    Channel C

    Channel B

    Channel D

    TO PREVENT

    Program In

    AnnounceOut

    MS-704 Rear Panel Features

    28. Power Connector And SwitchEIA power connector for 100 -240 VAC operation.

    29. Intercom Connectors (See specifications)

    30. Channel Termination SwitchesProvides individual termination for each intercom channel.

    31. Announce Output (XLR-M 3-PIN)Line-level transformer-isolated audio output.

    32. Program Input #1 (XLR-F 3-PIN)Electronically balanced line-level audio input that is sent to the station or selectively tothe intercom channels.

    33. Hot MIC/IFB OutputProvides line-level audio output from mic at all times while on and provides feed toexternal IFB system.

    34. Aux Connector (DB-25F)Provides 4 separate Program Inputs, announce Relay contacts, and a footswitch input.

    Redundant Failsafe Power SupplyThe 1.2-amp universal switching power supply is a 30-volt regulated supply

    with multiple short-circuit protection. It can sense the difference between

    a long-term short circuit and an instantaneous overload, allowing the

    intercom to continue to operate even when a station is plugged in,

    momentarily exceeding the capacity of the power supply. If a shutdown

    occurs from a shorted intercom cable, the power supply will recover under

    full load when the short is removed.

    Easy Access Sub PanelA removable front panel gives the operator easy access to the stations

    configuration switches and trim pots. Clearly labeled and simple to adjust,

    these controls allow the station to be instantly configured for virtually any

    communications application. When configuration is complete, the front

    panel re-attaches, revealing only those controls useful for normal operation.

    Multiple Program Audio SourcesThe station accepts five separate program audio sources: four line-level

    balanced inputs and one assignable line level input. The assignable

    program input accepts a balanced signal and is designed for monitoring

    external audio in the headset or speaker. The four balanced program inputs

    can be used to create individual program feeds on the intercom channels.

    Three of these channels can be used for program interrupt.

    Technical Specifications:

    dBu is an absolute measurement. 0 dBu is referenced to 0.775volts RMS

    Panel Microphone InputInput Type: ElectretInput Impedance: >=2KMic Limiter Threshold: 0dBu 3dBMic Limiter Range(MS-704 & RM-704): >= 20dBMic Limiter Range (SB-704): >= 15dB

    Headset Microphone InputInput Type: DynamicInput Impedance: >= 1KMic Limiter Threshold: 0dBu 3dBMic Limiter Range(MS-704 & RM-704): >= 17dBMic Limiter Range (SB-704): >= 15dB

    Program Line InputMaximum Level beforeClipping: >= 20dBuInput Impedance: >= 5K

    Headset OutputLoad Impedance: >= 8Output Impedance: = 17dBu

    Speaker OutputLoad Impedance: >= 4Max Output Level before1% Distortion: 20dBu 2dBu

    Party Line OutputOff Noise: < -74dBuOutput Impedance: >10K

    Party Line InputCrosstalk: < -60dBMax level before Clipping: >= 12dBuSidetone Null Capability: > 25dB

    Stage Announce/Balanced Line OutdecnalaB:epyT

    Output Impedance: >= 200Load Impedance: >= 600

    IFB/Hot MicdecnalabnU:epyT

    Output Impedance: 150Load Impedance: >= 600

    Frequency ResponsePanel Mic - Party Line: 600 - 10KHz 3dBHeadset Mic - Party Line: 200 - 12KHz 3dBHeadset Mic - Line Out: 200 - 12KHz 3dBProgram Input - Party Line: 100 - 17KHz 3dBProgram Input - Headset Out: 200 - 10KHz 3dBProgram Input - Speaker Out: 300 - 10KHz 3dBParty Line - Headset Out: 200 - 10KHz 3dBParty Line - Speaker Out: 300 - 10KHz 3dB

  • 8/11/2019 Clear-Com_MS-704_RM-704_SB-704_Datasheet.pdf

    4/4

    www.clearcom.com

    Americas and Asia-Pacific Headquarters California, United States Tel: +1.510.337.6600Europe, Middle East and Africa Headquarters Cambridge, United Kingdom Tel: +44 1223 815000China Office Beijing, P.R. China Tel: +86-10-65811360/65815577 2011. Clear-Com LLC. All rights reserved. Clear-Com, the Clear-Com logo, and Clear-Com Encore are registered trademarks of HM Electronics, Inc.

    Clear-Com Encore TM

    MS-704, RM-704, SB-704 4-Channel Intercom Stations

    Max DistortionPanel Mic - Party Line: