Cleanroom Suite & Firewall Partitions for Aeronautical ...
1
CLEANROOM SUITE & FIREWALL PARTITIONS FOR AERONAUTICAL RESEARCH & DEVELOPMENT Precision Manufacturer Bristol Background Using our unique experience of cleanroom design and construction and fire-rated enclosures, Stancold were awarded the project after winning a competitive tender through Principle Contractor, Merit Holdings. Process The suite of new cleanrooms was built to grade D classification and the fire-rated enclosures were designed to be clean not classified. Solution We installed 6m high freestanding walls with integrated flush cleanroom windows connected to an aluminium T-Bar suspended ceiling grid which formed the plenum and low- level return air cooling coils. The return air ducts were formed using 50mm FM approved Puracore cleanroom walls to a height of 6m and we also provided temperature controlled cleanrooms with Eurobond panels to a height of 8m. Project Details Location Bristol Building Use Engine Manufacturer Installation Time 21 Weeks Panel Core Aluminium Honeycomb & Mineral Fibre Panel Thickness 50mm, 75mm, 150mm Panel Requirements 3350m² Services Free Consultation Site Surveys Project Management Installation Maintenance Advice This project showcases our cleanroom expertise Paul Towse, Project Manager “ ” Stancold PLC, Portview Road, Avonmouth, Bristol BS11 9LQ T 0117 316 7000 | E [email protected] | www.stancold.co.uk
Transcript of Cleanroom Suite & Firewall Partitions for Aeronautical ...
CLEANROOM SUITE & FIREWALL PARTITIONS FOR AERONAUTICAL RESEARCH & DEVELOPMENTPrecision Manufacturer Bristol
Background
Using our unique experience of cleanroom design and construction and fire-rated enclosures, Stancold were awarded the project after winning a competitive tender through Principle Contractor, Merit Holdings.
Process
The suite of new cleanrooms was built to grade D classification and the fire-rated enclosures were designed to be clean not classified.
Solution
We installed 6m high freestanding walls with integrated flush cleanroom windows connected to an aluminium T-Bar suspended ceiling grid which formed the plenum and low-level return air cooling coils. The return air ducts were formed using 50mm FM approved Puracore cleanroom walls to a height of 6m and we also provided temperature controlled cleanrooms with Eurobond panels to a height of 8m.
Project DetailsLocation Bristol
Building Use Engine Manufacturer
Installation Time 21 Weeks
Panel Core Aluminium Honeycomb & Mineral Fibre
Panel Thickness 50mm, 75mm, 150mm
Panel Requirements3350m²
Services Free Consultation
Site Surveys
Project Management
Installation
Maintenance Advice
This project showcases our cleanroom expertise
Paul Towse, Project Manager“ ”Stancold PLC, Portview Road, Avonmouth, Bristol BS11 9LQ
T 0117 316 7000 | E [email protected] | www.stancold.co.uk
