Claris Build-Your-Kit Design Guide - LED Living Technology

[think outside the tube.]

Say Goodbye to your oldflickering fluorescent tubes.Say HELLO to the new tube-free Claris LED Retro-fit Kit.

YEAR

10 W

ARRANT Y Copyright © LED Living Technology. All rights reserved.

ledlivingtechnology.com I Claris LED Retrofit Kit I 1

Disclaimer: LED Living Technology is not responsible for the accuracy of recommendations included in this guide, as they are based on field experience and generalized troffer characteristics - meant to be used as suggestions. We encourage users to contact LED Living Technology representatives for lighting layouts in regards to their specific project needs.

Section AAn express route to choosing your Claris LED Retrofit Kit. Use this Guide to find manufacturer-recommend-ed replacements for existing systems in standard 2’x2’, 2’x 4’, and 1’x4’ direct recessed troffer housings.

Section BThis section is for the explorers. Free your mind, and discover the wide versatility and modularity of the Claris LED Retrofit Kit design.

how toUse This Guide

The Claris LED Retrofit Kit is designed with versatility and customer-driven solutions in mind (Section B); based on experience and performance data, we have also put together a list of our recommendations as a guide to building your kit (Section A).

2’x2’ Direct Recessed Troffers pages 3-4

FL T8 2 Lamp F17T8 3 3 Lamp F17T8 4 2 Lamp FB32T8 U-Bend 4

FL T12 2 Lamp F20T12 3 3 Lamp F20T12 4 2 Lamp FB34/FB40 T12 U-Bend 4

2’x4’ Direct Recessed Troffers pages 5-7

FL T8 2 Lamp F32T8 5 3 Lamp F32T8 5 4 Lamp F32T8 6FL T12 2 Lamp 34/40T12 6 3 Lamp 34/40T12 7 4 Lamp 34/40T12 7

1’x4’ Direct Recessed Troffers page 8

FL T8 1 Lamp F32T8 8 2 Lamp F32T8 8

FL T12 2 Lamp 34/40T12 8

Kit Performance Tables 9Exploring Kit Modularity 10

BUILD-YOUR-KITRECOMMENDATION HUB

BUILD-YOUR-OWN-KIT GUIDE


YEAR

10 W

ARRANT Y

Advanced LED TechnologyThink Outside The Tube™

notes

1 Claris Retrofit Kits utilizing the technologies above are patent pending. 2 Claris Rapid Thermafuse strips feature up to 130 lumens/W.

Because Precise MeansEfficient.

THERMAL MANAGEMENT I Rapid Thermafuse Technology.

NEA Non-Rigid Beam-Shaping Isotropic Lens

CONTROLLED OPTICS

Proper thermal management plays the biggest role in LED lifetime. Patent-pend-ing Rapid Thermafuse Technology works to transfer heat from the LEDs to the existing fixture housing, which acts as an effective heat dissipator. This technique results in LED core tem-peratures of only 5-10º above room tem-perature and an LED lifetime exceeding 168,000 hours.

Not only are LEDs a more efficient light source2, but when their precise direction-al nature is designed for correctly, they can illuminate the same space equally or better than alternate light sources with fewer lumens. Deliver illumination where it counts: with Isotropic Diffusion, LEDs are diffused as they leave the housing, ensuring minimal light loss and making the most out of your LED technology.

isotropicdiffusion

Isotropic Lens

LEDsStandard Lens

Say goodbye to the pinprick glare as-sociated with LEDs. With nearly two decades of experience in LED applica-tions, LED Living Technology takes glare management to the next level with Iso-tropic Diffusion. Lightweight, isotro-pic diffuser lens sits on top of existing prismatic lens, generating evenly diffuse and comfortable imaging1.

Rapid Thermafuse Technology provides a freeway for heat dissipation from the LEDs to the existing housing.

Existing Housing

Rapid Thermafuse Technology

LED Strip

CLARISLED RETROFIT KITSRevolutionary By Design

modularity. Discover the world of possibilities made open to you with LED Living Technology's patent-pending Think Outside The Tube™ design. controllability. Increase your energy savings with 0-10V dimming and daylighting capabilities. performance. Let us show you what Quality of Light™ means, with up to 130 lm/W, 86 CRI, Rapid Thermafuse Technology, and Isotropic Diffusion.

All Content Copyright © LED Living Technology. All rights reserved.

2 Lamp F17T8 / F20T12 Recommended Claris LED Replacement Kit

Kit Options Model # Watts TotalStrips

Lumen Output (Total Strips)

RECOMMENDED [Matches Fluorescent Mean Lumens, Improves upon Quality of Light™] CLA-22-2-UNV-DW-1K 22 2 2500 lm

UPGRADED PERFORMANCE[Maintains Fluorescent Initial Lumens, Improves upon Quality of Light™] CLA-30-4-UNV-DW-1K 30 4 3720 lm

DIMMING OPTION[0-10V Dimmable] CLA-34-4-10D-DW-1K 34 4 3927 lm

FL I T8 / T12

Section ASection A of this Guide is a ready-made recommendation hub for choosing a Claris LED Retrofit Kit configuration, based on your existing system. Navigate this section by Housing Type and Fluorescent Lamp Type (T8 or T12).


2'x2' direct recessed


Kit Options Model # Watts Total Strips

Lumen Output (Strips)


MAXIMUM RETURN OPTION [Ultimate Cost & Power Saving Option, Improves upon Quality of Light™] CLA-22-2-UNV-DW-1K 22 2 2500 lm


DIMMING OPTION[0-10V Dimming/Daylighting] CLA-34-3-10D-DW-1K 34 3 3729 lm

2 Lamp FB32T8 / FB34T12 / FB40T12 U-Bend Recommended Claris LED Replacement Kit

Kit Options Model Watts TotalStrips




UPGRADED PERFORMANCE [Maintains Fluorescent Initial Lumens, Improves upon Quality of Light™] CLA-22-2-UNV-DW-2K 44 4 5000 lm


FL I T8 / T12


2'x2'direct recessed

3 Lamp F32T8 Recommended Claris LED Replacement Kit




MAXIMUM RETURN OPTION [Ultimate Cost & Power Saving Option, Improves upon Quality of Light™]

CLA-22-2-UNV-DW-2K 44 4 5000 lm




Kit Options Model # Watts QTY.Strips






FL I T8


direct recessed2'x4'

direct recessed 2'x4'






MAXIMUM OUTPUT OPTION[Highest output option, Improves upon Quality of Light™] CLA-34-4-10D-DW-2K 68 8 7854 lm



FL I T8







FL I T12









FL I T12








direct recessed2'x4'

1 Lamp F32T8 / F34T12 / F40T12 Recommended Claris LED Replacement Kit






FL I T8 / T12

2 Lamp F32T8 / F34T12 / F40T12 Recommended Claris LED Replacement Kit








direct recessed 1'x4'

Tables below indicate strip performance specifications and light levels for the various Claris LED Retrofit Kits, both single and doubled. Please request Claris LED Retrofit Kit Data Sheets for further info regarding lifetime, payback, driver performance, polar plots, etc. Please note that the "Doubled Kit" Table below shows the specs for 2 Single Kits installed in one housing. For Doubled Kits, use a 2K designator at the end of your model # upon ordering (see page 11).

SINGLE Kit (1K)1

CLA-22 22 2 11 114 2500

3 7.33 123 2700

4 5.5 130 2860

CLA-30 30 3 10 118 3540

4 7.5 124 3720

CLA-34* 34 3 11.33 113 3729

4 8.50 119 3927

CLA-60* 60 6 10 118 7080

8 7.5 124 7440

DOUBLED Kit (2K) 2

CLA-22 44 4 11 114 5000

6 7.33 123 5400

8 5.5 130 5720

CLA-30 60 6 10 118 7080

8 7.5 124 7440

CLA-34* 68 6 11.33 113 7458

8 8.50 119 7854

*0-10V Controllable for Dimming & DaylightingTo ensure LED lifetime and efficacy, maximum Watts/Strip = 11.5

efficiency

KEY CRI STRIPS

quickest ROI

Section BSection B of this Guide is for those who want to explore the vast potential & flexibility of the CLARIS LED Retrofit Kit. Using the performance tables below for single and doubled kits along with your imagination, generate the best kit to replace your existing system, whatever it may be. For stan-dard retrofitting recommendations, refer to Section A of this Guide (p.3).


Go Ahead, Think Outside The Tube™

Up to 86 CRI for all kits Size: 21.3" length, 1" width, 0.11 lbs

MODEL

MODEL

TOTA

L WATTA

GE

WATTAGE

TOTA

L # OF S

TRIPS

# OF STRIPS

WATTS/STRIP

WATTS/STRIP

LM/W

LM/W

TOTA

L LUMENS

TOTA

L LUMENS

Think Outside The Tube™. Finally -- there is a modular and versatile fluorescent replacement solution that offers unprecedented life-time, efficacy, ease of installation, and affordability: effectively rede-fining the LED Retrofit Kit.

1 When ordering a Single Kit, one kit is installed in each existing housing. Requires a 1K designator in Model # upon order-ing (pg. 11).

2 When ordering a Dou-bled Kit, two Single Kits are installed in one hous-ing. Requires a 2K des-ignator in Model # upon ordering (pg. 11).

Note: LED Living Technology maintains a tolerance of +/- 6% for all measurements.


led

livin

gte

chno

log

y.co

m I

Cla

ris L

ED

Ret

rofit

Kit

I

10

/ sa

mp

le k

it co

nfig

urat

ions

/

Exp

lore

. The

Cla

ris L

ED R

etro

fit K

it is

the

mos

t ve

rsati

le fl

uore

scen

t-re

plac

emen

t LED

Ret

rofit

Kit

on th

e m

arke

t–a

door

ope

ner

for

spec

i-fie

rs lo

okin

g to

em

brac

e LE

D in

a

way

that

bes

t sup

port

s the

ir pe

rfor-

man

ce a

nd e

nerg

y sa

ving

s nee

ds.

flexi

bili

ty.

Indi

cate

s Dou

bled

Kit

optio

ns a

nd th

e co

rres

pond

ing

addi

tiona

l driv

er.

KEY

:


1x4

Trof

fer

Wra

p Li

ght

2’x2

’ Tro

ffer

2’x2

’ Dire

ct-In

dire

ct T

roff

er

2’x4

’ Tro

ffer

1’x8

’ Tro

ffer

flexi

bility

LED Driver

LED Driver

LED Driver

LED

Dri

ver

LED

Dri

ver

LED

Dri

ver

LED

Dri

ver

LED

Dri

ver

LED

Dri

ver

LED

Dri

ver

LED

Dri

ver

LED

Dri

ver

LED D

river

LED DriverLED Driver

LED Driver

LED

Dri

ver

LED

Dri

ver

LED

Dri

ver

LED

Dri

ver

LED

Dri

ver

LED

Dri

ver

CLA

-22-

2-U

NV

-XX

-1K

CLA

-22-

3-U

NV

-XX

-2K

CLA

-30-

3-U

NV

-XX

-2K

CLA

-34-

3-10

D-X

X-2

KC

LA-6

0-6-

UN

V-X

X-1

KC

LA-6

0-6-

10D

-XX

-1K

CLA

-22-

2-U

NV

-XX

-1K

CLA

-22-

4-U

NV

-XX

-1K

CLA

-30-

4-U

NV

-XX

-1K

CLA

-34-

4-10

D-X

X-1

KC

LA-2

2-2-

UN

V-X

X-2

K

CLA

-22-

4-U

NV

-XX

-1K

CLA

-30-

4-U

NV

-XX

-1K

CLA

-34-

4-10

D-X

X-1

KC

LA-2

2-2-

UN

V-X

X-2

K

CLA

-22-

4-U

NV

-XX

-2K

CLA

-30-

4-U

NV

-XX

-2K

CLA

-34-

4-10

D-X

X-2

K

CLA

-22-

2-U

NV

-XX

-1K

CLA

-22-

4-U

NV

-XX

-2K

CLA

-30-

4-U

NV

-XX

-2K

CLA

-34-

4-10

D-X

X-2

KC

LA-6

0-8-

UN

V-X

X-1

KC

LA-6

0-8-

10D

-XX

-1K

CLA

-34-

4-10

D-X

X-2

KC

LA-6

0-8-

UN

V-X

X-1

KC

LA-6

0-8-

10D

-XX

-1K

CLA

-22-

4-U

NV

-XX

-2K

CLA

-30-

4-U

NV

-XX

-2K

CLA

-22-

3-U

NV

-XX

-1K

CLA

-30-

3-U

NV

-XX

-1K

CLA

-34-

3-10

D-X

X-1

K

CLA

-22-

4-U

NV

-XX

-1K

CLA

-30-

4-U

NV

-XX

-1K

CLA

-34-

4-10

D-X

X-1

K

CLA

-22-

4-U

NV

-XX

-1K

CLA

-30-

4-U

NV

-XX

-1K

CLA

-34-

4-10

D-X

X-1

KC

LA-2

2-2-

UN

V-X

X-2

KM

OD

ELS

MO

DEL

S

MO

DEL

S

MO

DEL

S

CLA

-60-

8-U

NV

-XX

-1K

CLA

-60-

8-10

D-X

X-1

K

CLA

-22-

4-U

NV

-XX

-1K

CLA

-30-

4-U

NV

-XX

-1K

CLA

-34-

4-10

D-X

X-1

KC

LA-2

2-2-

XX

-UN

V-2

K

MO

DEL

S

CLA

-22-

4-U

NV

-XX

-1K

CLA

-30-

4-U

NV

-XX

-1K

CLA

-34-

4-10

D-X

X-1

KC

LA-2

2-2-

UN

V-X

X-2

K

MO

DEL

S

MO

DEL

SM

OD

ELS

MO

DEL

SM

OD

ELS

MO

DEL

S

MO

DEL

S

MO

DEL

S

MO

DEL

S

CLA

-22-

2-U

NV

-XX

-1K

MO

DEL

S

Root Watts Driver LED Color Temp Kits Per HousingCLA 22-2 - 22W, 2 Rapid Thermafuse Strips

22-3 - 22W, 3 Rapid Thermafuse Strips22-4 - 22W, 4 Rapid Thermafuse Strips30-3 - 30 W, 3 Rapid Thermafuse Strips30-4 - 30 W, 4 Rapid Thermafuse Strips34-3 - 34W, 3 Rapid Thermafuse Strips (Dimming Only)*

34-4 - 34W, 4 Rapid Thermafuse Strips (Dimming Only)*

60-6 - 60 W, 6 Rapid Thermafuse Strips (Dimmable)*

60-8 - 60 W, 8 Rapid Thermafuse Strips (Dimmable)*

*Please Note: Only 34 and 60 Watt Kits are compatible with a 10D Driver designator, for dimming

UNV - Uni-Volt 120-277 VAC (On/Off)10D* - Dimmable 0-10V Uni-volt 120-277 VAC

*Please Note: Dimming (10D) is only available for 34W and 60W Kits

WW - Warm White 3000K

DW - Daylight White

4000K (Stand-

ard)

CW - Cool White

5000K

3500K - 3500K

1K - Single Kit

2K - Doubled Kit

CLA - 30 - 4 - UNV - DW - 1K

MODEL # ROOT Watts DRIVER/VAC

Input

COLOR TEMP. KITS PER HOUSING

Quantity of Rapid

Thermafuse Strips

Claris LED Retrofit Kit ordering:

Lens ordering:

SAMPLE ORDER #:

1st Line Item (Kit): CLA-34-4-10D-DW-1K2nd Line Item (Lens): CLA-NB-22B

Before ordering your Claris LED Retrofit Kit, consult your local LED Living representative to discuss options relative to your project. Please also ref-erence the data sheet for your kit to find complete model specifications including CRI, driver performance, polar plots, etc.

LED Living Technology211 Sinclair Rd. Suite 100 I Bristol, PA, USA 19007 I p: 215.633.1558 I e: [email protected]

All Claris LED Retrofit Kits come equipped with an iso-tropic non-rigid beam shaping lens. Isotropic lenses can be paired with the existing diffuser (prismatic, parabolic, etc). For a more modern feel, try our non-rigid Nea Opalescent Diffuser.

OPTICS / diffusers

Ordering

I 11

Root Glare Management Lens Additional Lens Lens Size CLA NB - Nea Beam-Shaping Isotropic Lens

[Standard], 0.033" thickness for Prismatic Lens overlay

OP - Opalescent Diffuser (rigid), 0.110" thickness

TP - Traditional Prismatic Diffuser, 0.100" thickness

TT - Thick Prismatic Diffuser, 0.125" thicknessBlank - Do Not Include Additional Lens

22A - 22 1/4” X 22 1/8”22B - 22 3/4” X 22 3/4”14A - 46 1/2” X 10 1/2”14B - 47 3/4” X 11 3/4”24A - 46 1/2” X 22 1/4”24B - 47 3/4” X 23 3/4”XXX - CUSTOM

Opalescent Film Glare Management Lens(For overlaying with existing Parabolic/Egg-Crate Louver)

Isotropic Beam-Shaping Lens(For overlaying with existing Prismatic Diffuser)

CLA-NB CLA-OF


LLT 140002R2

OF - Opalescent Film (non-rigid), 0.010"

thickness (For Parabolic/Egg-Crate Conversion Only)

RECYCLES EXISTINGHOUSING

Claris Build-Your-Kit Design Guide - LED Living Technology

Documents

Transcript of Claris Build-Your-Kit Design Guide - LED Living Technology