Clamping tools with ISO Chucks - MAPAL Clamping tools with ISO MAPAL has a wide range of products in...

131

Clamping tools with ISOMAPAL has a wide range of products in the area of steep taper clamping tools and adapters in accordance with DIN 69871.

Along with chucks of all common types, you will find steep taper adapters that in combination with the flange adapters in accordance with MAPAL works standard ensure increased radial run-out accuracy.

Chucksc Chucks for cylindrical shanks with clamping surfaces 132-137

c HighTorque Chuck 138

c Hydraulic chucks HydroChuck 139-141

c Shrink chucks ThermoChuck 142-147

c Milling cutter arbors 148

c Precision-DrillChuck 149-153

Replaceable head holdersc CFS replaceable head holders 154

Adaptersc KS steep taper adapters 155-157

Clamping technology | Clamping tools with ISO

l2

l3

l1

2° ��

d 1 d 2

�

G

40 6 25 50 36 10 M5 0,9 MNC-SK040-06-050-3-0-A 10060812 30326221

40 8 28 50 36 10 M6 1,0 MNC-SK040-08-050-3-0-A 10060813 30326224

40 10 35 50 40 10 M8 1,0 MNC-SK040-10-050-3-0-A 10060814 30326226

40 12 42 50 45 10 M10 1,2 MNC-SK040-12-050-3-0-A 10060815 30326232

40 14 44 50 45 10 M10 1,2 MNC-SK040-14-050-3-0-A 10060817 30326232

40 16 48 63 48 10 M12 1,3 MNC-SK040-16-063-3-0-A 10060818 30326237

40 18 50 63 48 10 M12 1,4 MNC-SK040-18-063-3-0-A 10060819 30326237

40 20 52 63 50 10 M16 1,4 MNC-SK040-20-063-3-0-A 10060820 30326239

40 25 65 100 56 10 M20 2,3 MNC-SK040-25-100-3-0-A 10060822 30326243

40 32 72 100 60 10 M20 2,1 MNC-SK040-32-100-3-0-A 10073683 30326243

50 6 25 63 36 10 M5 2,8 MNC-SK050-06-063-3-0-A 10073684 30326221

50 8 28 63 36 10 M6 2,8 MNC-SK050-08-063-3-0-A 10073685 30326224

50 10 35 63 40 10 M8 2,9 MNC-SK050-10-063-3-0-A 10073686 30326226

50 12 42 63 45 10 M10 3,0 MNC-SK050-12-063-3-0-A 10073687 30326232

50 14 44 63 45 10 M10 3,1 MNC-SK050-14-063-3-0-A 10073688 30326232

50 16 48 63 48 10 M12 3,1 MNC-SK050-16-063-3-0-A 10073689 30326237

50 18 50 63 48 10 M12 3,1 MNC-SK050-18-063-3-0-A 10073690 30326237

50 20 52 63 50 10 M16 3,2 MNC-SK050-20-063-3-0-A 10073691 30326239

50 25 65 80 56 10 M20 3,9 MNC-SK050-25-080-3-0-A 10073692 30326243

50 32 72 100 60 10 M20 4,1 MNC-SK050-32-100-3-0-A 10073693 30326243

132

Chucks for cylindrical shanks with angled clamping surfaceShank ISO in accordance with DIN 69871 Form AD/B

Nominal size

ISO

Dimensions G Weight

kg

Specification Order No. Order No.

length adjust-

ment screwd1 d2 l1 l2 l3

Dimensions in mm.


Usage: For mounting milling cutters and drills with cylindrical shank and angled clamping surface (2°) in accordance with DIN 1835 Form E and DIN 6535 Form HE.

Supply includes: Built-in clamping screw and length adjustment screw, does not include pull stud.

Design: Permissible run-out variation on the taper shank in relation to the clamping diameter d1 = 0.003 mm. The bore tolerance is much tighter than DIN 1835 (dH4) to obtain machining accuracies of the highest quality. Normal setting Form AD, if Form B is required, please state with the order.

Note: From clamping diameter d1 = 25 mm two clamping screw are provided. The length adjustment screws have a through hole for coolant.

Balancing quality: G 2.5 to 16,000 min-1

6 M6x9 10060983

8 M8x9 10042517

10 M10x12 10004134

12, 14 M12x14 30002947

16, 18 M14x16 10004136

20 M16x16 10004137

25 M18x2x20 10004141

32 M20x2x20 10004129

40, 50 2 M5x5 10036757

133

For clamping diameter

d1

Clamping screw in accordance with DIN 1835-B

Size Order No.



Spare parts

Dimensions in mm.

For nominal size

ISO

Quantity

required

Threaded pin in accordance with ISO 4026

Size Order No.

d 1 d 2

l1

l2

l3

G

�

��

2°

40 16 48 80 50 4 M12x1,25 1,6 MNC-SK040-16-080-3-0-A 10058633

40 20 50 80 50 4 M16x1,5 1,9 MNC-SK040-20-080-3-0-A 10058644

40 25 65 95 56 4 M20x1,5 2,3 MNC-SK040-25-095-3-0-A 10058647

45 16 48 80 48 4 M12x1,25 2,1 MNC-SK045-16-080-3-0-A 10058634

45 20 52 85 50 4 M16x1,5 2,3 MNC-SK045-20-085-3-0-A 10058645

45 25 63 90 56 4 M20x1,5 2,5 MNC-SK045-25-090-3-0-A 10058648

45 40 80 104 70 4 M20x1,5 2,8 MNC-SK045-40-104-3-0-A 10058650

50 16 48 80 48 4 M12x1,25 2,8 MNC-SK050-16-080-3-0-A 10058636

50 20 52 85 50 4 M16x1,5 3,1 MNC-SK050-20-085-3-0-A 10058646

50 25 65 90 56 4 M20x1,5 3,3 MNC-SK050-25-090-3-0-A 10058649

50 40 80 104 70 4 M20x1,5 4,1 MNC-SK050-40-104-3-0-A 10058651

16 M10x12 10004134 M12x1,25x35 30326183

20 M12x14 30002947 M16x1,5x40 30326184

25 M12x14 30002947 M20x1,5x45 30326185

40 M12x14 30002947 M20x1,5x45 30326185

134

40, 45, 50 2 M5x5 10036757


d1

Clamping screw in accordance with DIN 1835-B Length adjustment screw

Size Order No. Size Order No.


Usage: For mounting MAPAL NC reamers with cylindrical shank and angled clamping surface (2°) similar to DIN 1835 Form E.


Design: Permissible run-out variation on the taper shank in relation to the clamping diameter d1 ≤ 0.003 mm. The bore tolerance is reduced to 0.003 mm to obtain the highest quality machining accuracies. Normal setting Form AD, if Form B is required, please state with the order.

Note: From clamping diameter d1 = 40 mm two clamping screw are provided. The length adjustment screws have a through hole for coolant. For pull studs see page 224.

Balancing quality: G 6.3 at 3,000 min-1

Nominal size

ISO

Dimensions G Weight

kg

Specification Order No.

d1 d2 l1 l2 l3

Spare parts

Dimensions in mm.


For nominal size

ISOQuantity required


Size Order No.

Dimensions in mm.

135

d 1 d 2

�

�l1

40 6 25 50 0,9 MWC-tSK040-06-050-3-0-W 10059555

40 6 25 100 1,1 MWC-SK040-06-100-3-0-W 10060644

40 6 25 160 1,3 MWC-SK040-06-160-3-0-W 10060645

40 8 28 50 1,0 MWC-SK040-08-050-3-0-W 10060646

40 8 28 100 1,1 MWC-SK040-08-100-3-0-W 10060647

40 8 28 160 1,4 MWC-SK040-08-160-3-0-W 10060648

40 10 35 50 1,0 MWC-SK040-10-050-3-0-W 10060649

40 10 35 100 1,4 MWC-SK040-10-100-3-0-W 10060650

40 10 35 160 1,8 MWC-SK040-10-160-3-0-W 10060651

40 12 42 50 1,2 MWC-SK040-12-050-3-0-W 10060652

40 12 42 100 1,7 MWC-SK040-12-100-3-0-W 10060653

40 12 42 160 2,2 MWC-SK040-12-160-3-0-W 10060654

40 14 44 50 1,2 MWC-SK040-14-050-3-0-W 10060655

40 14 44 100 1,7 MWC-SK040-14-100-3-0-W 10060656

40 14 44 160 2,5 MWC-SK040-14-160-3-0-W 10060657

40 16 48 63 1,3 MWC-SK040-16-063-3-0-W 10060658

40 16 48 100 1,7 MWC-SK040-16-100-3-0-W 10060660

40 16 48 160 2,7 MWC-SK040-16-160-3-0-W 10060661

40 18 50 63 1,3 MWC-SK040-18-063-3-0-W 10060662

40 18 50 100 1,9 MWC-SK040-18-100-3-0-W 10060663

40 18 50 160 2,8 MWC-SK040-18-160-3-0-W 10060664

40 20 52 63 1,3 MWC-SK040-20-063-3-0-W 10059554

40 20 52 100 1,8 MWC-SK040-20-100-3-0-W 10060666

40 20 52 160 2,8 MWC-SK040-20-160-3-0-W 10060667

40 25 65 100 2,3 MWC-SK040-25-100-3-0-W 10060668

40 25 65 160 3,9 MWC-SK040-25-160-3-0-W 10060669

40 32 72 100 2,6 MWC-SK040-32-100-3-0-W 10064102


Continued on next page.

Chucks for cylindrical shanks with lateral drive areaShank ISO in accordance with DIN 69871 Form AD/B

Nominal size

ISO

Dimensions Weight

kg


d1 d2 l1

Dimensions in mm.

136

50 6 25 63 2,8 MWC-SK050-06-063-3-0-W 10073656

50 6 25 100 3,1 MWC-SK050-06-100-3-0-W 10073657

50 6 25 160 3,5 MWC-SK050-06-160-3-0-W 10073658

50 8 28 63 2,8 MWC-SK050-08-063-3-0-W 10073659

50 8 28 100 3,3 MWC-SK050-08-100-3-0-W 10073660

50 8 28 160 3,7 MWC-SK050-08-160-3-0-W 10073661

50 10 35 63 2,9 MWC-SK050-10-063-3-0-W 10073662

50 10 35 100 3,3 MWC-SK050-10-100-3-0-W 10073663

50 10 35 160 3,8 MWC-SK050-10-160-3-0-W 10073664

50 12 42 63 3,1 MWC-SK050-12-063-3-0-W 10073665

50 12 42 100 3,4 MWC-SK050-12-100-3-0-W 10073666

50 12 42 160 3,9 MWC-SK050-12-160-3-0-W 10073667

50 14 44 63 3,2 MWC-SK050-14-063-3-0-W 10073668

50 14 44 100 3,5 MWC-SK050-14-100-3-0-W 10073669

50 14 44 160 4,2 MWC-SK050-14-160-3-0-W 10073670

50 16 48 63 3,4 MWC-SK050-16-063-3-0-W 10073671

50 16 48 100 1,0 MWC-SK050-16-100-3-0-W 10073672

50 16 48 160 1,5 MWC-SK050-16-160-3-0-W 10073673

50 18 20 63 3,2 MWC-SK050-18-063-3-0-W 10073674

50 18 50 100 4,9 MWC-SK050-18-100-3-0-W 10073675

50 18 50 160 4,6 MWC-SK050-18-160-3-0-W 10073676

50 20 52 63 3,2 MWC-SK050-20-063-3-0-W 10073677

50 20 52 100 4,0 MWC-SK050-20-100-3-0-W 10073678

50 20 52 160 4,6 MWC-SK050-20-160-3-0-W 10073679

50 25 65 80 4,0 MWC-SK050-25-080-3-0-W 10073680

50 25 65 160 5,8 MWC-SK050-25-160-3-0-W 10073681

50 32 72 100 5,9 MWC-SK050-32-100-3-0-W 10059057

50 32 72 160 6,5 MWC-SK050-32-160-3-0-W 10073682

d 1 d 2

�

�

l1


Nominal size

ISO

Dimensions Weight

kg


d1 d2 l1

Dimensions in mm.


Usage: For mounting milling cutters and drills with cylindrical shank and angled clamping surface (2°) in accordance with DIN 1835 Form E and DIN 6535 Form HE.


Design: Permissible run-out variation on the taper shank in relation to the clamping diameter d1 = 0.003 mm.

The bore tolerance is much tighter than DIN 1835 (dH4) to obtain machining accuracies of the highest quality. Normal setting Form AD, if Form B is required, please state with the order.

Note: From clamping diameter d1 = 25 mm two clamping screw are provided. The length adjustment screws have a through hole for coolant.

Balancing quality: G 2.5 to 16,000 min-1

137

6 M6x9 10060983

8 M8x9 10042517

10 M10x12 10004134

12, 14 M12x14 30002947

16,18 M14x16 10004136

20 M16x16 10004137

25 M18x2x20 10004141

32 M20x2x20 10004129

40, 50 2 M5x5 10036757




d1

Clamping screw in accordance with DIN 1835-B

Size Order No.

Spare parts

Dimensions in mm.

For nominal size

ISO

Quantity

required


Size Order No.

138

d 1 d 2 d 3

l1

l4

G

l2

l3

40 6 32 50 75 37 10 56 M5 1,4 HTC-SK040-06-075-3-0-A 30297611

40 8 34 50 75 37 10 56 M6 1,4 HTC-SK040-08-075-3-0-A 30297612

40 10 36 50 80 41 10 61 M8x1 1,4 HTC-SK040-10-080-3-0-A 30297613

40 12 38 50 85 46 10 66 M10x1 1,5 HTC-SK040-12-085-3-0-A 30297614

40 14 40 50 85 46 10 66 M10x1 1,6 HTC-SK040-14-085-3-0-A 30297615

40 16 42 50 90 49 10 71 M12x1 1,6 HTC-SK040-16-090-3-0-A 30297616

40 18 44 50 90 49 10 71 M12x1 1,7 HTC-SK040-18-090-3-0-A 30297617

40 20 48 50 95 51 10 76 M16x1 1,7 HTC-SK040-20-095-3-0-A 30297618

40 25 57 50 110 57 10 91 M16x1 2,2 HTC-SK040-25-110-3-0-A 30297619

40 32 63 50 120 61 10 101 M16x1 2,5 HTC-SK040-32-120-3-0-A 30297620


Usage: For clamping tools with smooth cylindrical shanks in accordance with DIN 1835 Form A, DIN 6535 Form HA up to ø 32 mm as well as with recesses in accordance with DIN 1835 Form B, E and DIN 6535 Form HB, HE directly and without intermediate sleeve in the clamping diameter. The clamping diameter is designed for a shank tolerance of h6.

Supply includes: Length adjustment screws, does not include pull stud. Includes hexagonal T-key.

Design: Normal setting Form AD, if Form B is required, please state with the order.

Note: Chuck with axial tool length adjustment. For intermediate sleeve for reducing the clamping diameter see page 216-218. (The accuracy may be affected on the usage of the intermediate sleeve). For pull studs see page 224. Length adjustment screw available on request.


HighTorque Chuck for high torque transmissionShank ISO in accordance with DIN 69871 Form AD/B

Nominal size

ISO

Dimensions G Weight

kg


d1 d2 d3 l1 l2 l3 l4

Dimensions in mm.

139

d 1

d 2 d 3

l1

G

l2

l3

l4

40 6 26 49,5 80,5 37 10 29,5 M5 1,3 MHC-SK040-06-080-3-0-A 30250958

40 8 28 49,5 80,5 37 10 30 M6 1,3 MHC-SK040-08-080-3-0-A 30250959

40 10 30 49,5 80,5 41 10 35 M8x1 1,3 MHC-SK040-10-080-3-0-A 30250960

40 12 32 49,5 80,5 46 10 40 M10x1 1,3 MHC-SK040-12-080-3-0-A 30250961

40 14 34 49,5 80,5 46 10 40 M10x1 1,3 MHC-SK040-14-080-3-0-A 30250962

40 16 38 49,5 80,5 49 10 45 M12x1 1,4 MHC-SK040-16-080-3-0-A 30250963

40 18 40 49,5 80,5 49 10 46 M12x1 1,3 MHC-SK040-18-080-3-0-A 30250964

40 20 42 49,5 80,5 51 10 47 M16x1 1,3 MHC-SK040-20-080-3-0-A 30250965

40 25 55 63 80,5 57 10 28 M16x1 1,6 MHC-SK040-25-080-3-0-A 30250966

40 32 63 70 80,5 61 10 25,5 M16x1 1,7 MHC-SK040-32-080-3-0-A 30250967

50 6 26 49,5 80,5 37 10 29,5 M5 3,2 MHC-SK050-06-080-3-0-A 30250968

50 8 28 49,5 80,5 37 10 30 M6 3,3 MHC-SK050-08-080-3-0-A 30250969

50 10 30 49,5 80,5 41 10 35 M8x1 3,3 MHC-SK050-10-080-3-0-A 30250970

50 12 32 49,5 80,5 46 10 40 M10x1 3,3 MHC-SK050-12-080-3-0-A 30250971

50 14 34 49,5 80,5 46 10 40 M10x1 3,3 MHC-SK050-14-080-3-0-A 30250972

50 16 38 49,5 80,5 49 10 45 M12x1 3,3 MHC-SK050-16-080-3-0-A 30250973

50 18 40 49,5 80,5 49 10 46 M12x1 3,3 MHC-SK050-18-080-3-0-A 30250974

50 20 42 49,5 80,5 51 10 42 M16x1 3,3 MHC-SK050-20-080-3-0-A 30250975

50 25 55 63 100 57 10 48 M16x1 3,8 MHC-SK050-25-100-3-0-A 30250976

50 32 63 70 100 61 10 61 M16x1 4,2 MHC-SK050-32-100-3-0-A 30250977


Short slim design

Hydraulic chucks HydroChuckShank ISO in accordance with DIN 69871 AD/B

Nominal size

ISO

Dimensions G Weight

kg


d1 d2 d3 l1 l2 l3 l4

Dimensions in mm.

Usage: For clamping tools with smooth cylindrical shanks in accordance with DIN 1835 Form A, DIN 6535 Form HA up to ø 32 mm as well as with recesses in accordance with DIN 1835 Form B, E and DIN 6535 Form HB, HE directly and without intermediate sleeve in the clamping diameter.

The clamping diameter is designed for a shank tolerance of h6.

Supply includes: Length adjustment screw, does not include pull stud. Includes hexagonal T-key.

Design: Longest tool lives and highest manufacturing quality on usage of smooth cylindrical shanks in accordance with DIN 1835 Form A and DIN 6535 Form HA. With a projection length of 2.5 x D (max. 50 mm) radial run-out accuracy 0.003 mm.

On usage of cylindrical shanks with angled clamping surface (Form E and Form HE) the accuracy may be affected. Normal setting Form AD, if Form B is required, please state with the order.



140

d 1

d 2 d 3

l1

l4

G

l2

l3

40 6 26 49,5 110 37 10 29 M5 1,7 MHC-SK040-06-110-3-0-A 30250978

40 8 28 49,5 110 37 10 30 M6 1,8 MHC-SK040-08-110-3-0-A 30250979

40 10 30 49,5 110 41 10 35 M8x1 1,8 MHC-SK040-10-110-3-0-A 30250980

40 12 32 49,5 110 46 10 40 M10x1 1,8 MHC-SK040-12-110-3-0-A 30250981

40 14 34 49,5 110 46 10 40 M10x1 1,8 MHC-SK040-14-110-3-0-A 30250982

40 16 38 49,5 110 49 10 45 M12x1 1,8 MHC-SK040-16-110-3-0-A 30250983

40 18 40 49,5 110 49 10 46 M12x1 1,9 MHC-SK040-18-110-3-0-A 30250984

40 20 42 49,5 110 51 10 47 M16x1 1,9 MHC-SK040-20-110-3-0-A 30250985

40 25 55 63 110 57 10 28 M16x1 2,3 MHC-SK040-25-110-3-0-A 30250986

40 32 63 59 110 61 10 59 M16x1 2,4 MHC-SK040-32-110-3-0-A 30250987

50 6 26 49,5 110 37 10 29 M5 4,1 MHC-SK050-06-110-3-0-A 30250988

50 8 28 49,5 110 37 10 30 M6 4,1 MHC-SK050-08-110-3-0-A 30250989

50 10 30 49,5 110 41 10 35 M8x1 4,1 MHC-SK050-10-110-3-0-A 30250990

50 12 32 49,5 110 46 10 40 M10x1 4,3 MHC-SK050-12-110-3-0-A 30250991

50 14 34 49,5 110 46 10 40 M10x1 4,3 MHC-SK050-14-110-3-0-A 30250992

50 16 38 49,5 110 49 10 45 M12x1 4,3 MHC-SK050-16-110-3-0-A 30250993

50 18 40 49,5 110 49 10 46 M12x1 4,5 MHC-SK050-18-110-3-0-A 30250994

50 20 42 49,5 110 51 10 42 M16x1 4,5 MHC-SK050-20-110-3-0-A 30250995

50 25 55 63 110 57 10 48 M16x1 4,7 MHC-SK050-25-110-3-0-A 30250996

50 32 63 70 110 61 10 50 M16x1 4,8 MHC-SK050-32-110-3-0-A 30250997









Long slim design

Hydraulic chucks HydroChuckShank ISO in accordance with DIN 69871 AD/B

Nominal size

ISO

Dimensions G Weight

kg


d1 d2 d3 l1 l2 l3 l4

Dimensions in mm.

141

d 2d 1

l1

G

l2

l3

40 20 49,5 64,5 51 10 M16x1 1,3 MHC-SK040-20-064-3-0-A 30251034

50 32 72 81 61 10 M16x1 3,9 MHC-SK050-32-081-3-0-A 30251035


Short heavy-duty design

Hydraulic chucks HydroChuckShank ISO in accordance with DIN 69871 Form AD/B

Nominal size

ISO

Dimensions G Weight

kg


d1 d2 l1 l2 l3

Dimensions in mm.








142

l1

d 3d 2d 1G

l3

l2

4,5°

l4

30 3 10 17 80 22 10 12 M6 0,5 MTC-SK030-03-080-1-0-A 30261560

30 4 15 22 80 26 10 16 M6 0,5 MTC-SK030-04-080-1-0-A 30261561

30 5 15 22 80 30 10 20 M6 0,5 MTC-SK030-05-080-1-0-A 30261562

30 6 21 27 80 36 10 26 M5 0,6 MTC-SK030-06-080-1-0-A 30261563

30 8 21 27 80 36 10 26 M6 0,6 MTC-SK030-08-080-1-0-A 30261564

30 10 24 32 80 41 10 31 M8x1 0,6 MTC-SK030-10-080-1-0-A 30261565

30 12 24 32 80 47 10 37 M10x1 0,7 MTC-SK030-12-080-1-0-A 30261566

30 14 27 34 80 47 10 37 M10x1 0,7 MTC-SK030-14-080-1-0-A 30261567

30 16 27 34 80 50 10 40 M12x1 0,7 MTC-SK030-16-080-1-0-A 30261568

30 18 33 42 80 50 10 40 M12x1 0,8 MTC-SK030-18-080-1-0-A 30261569

30 20 33 42 80 52 10 42 M16x1 0,8 MTC-SK030-20-080-1-0-A 30261570


Shrink chucks ThermoChuckShank ISO in accordance with DIN 69871 Form AD

Nominal size

ISO

Dimensions G Weight

kg


d1 d2 d3 l1 l2 l3 l4

Dimensions in mm.

Supply includes: Built-in length adjustment screw with through hole, does not include fine balancing screws or pull stud.

Design: Permissible run-out variation on the taper shank in relation to the clamping diameter d1 = 0.003 mm. The clamping diameter is designed for a shank tolerance of h6. Normal setting Form AD, if Form B is required, please state with the order.

Note: For tool extensions see page 220. For pull studs see page 224. Length adjustment screw and fine balancing screw available on request.


143

l1

d 3d 2d 1l3 l4

l

G

4,5°

2

40 3 10 17 80 22 10 12 M6 0,9 MTC-SK040-03-080-3-0-A 30261571

40 3 10 20 120 12 0,9 MTC-SK040-03-120-3-0-W 30261584

40 3 10 20 160 12 1,0 MTC-SK040-03-160-3-0-W 30261585

40 4 15 22 80 26 10 16 M6 0,9 MTC-SK040-04-080-3-0-A 30261572

40 4 15 22 120 16 1,0 MTC-SK040-04-120-3-0-W 30261586

40 4 15 22 160 16 1,1 MTC-SK040-04-160-3-0-W 30261587

40 5 15 22 80 30 10 20 M6 0,9 MTC-SK040-05-080-3-0-A 30261573

40 5 15 22 120 20 1,0 MTC-SK040-05-120-3-0-W 30261588

40 5 15 22 160 20 1,1 MTC-SK040-05-160-3-0-W 30261589

40 6 21 27 80 36 10 26 M5 1,0 MTC-SK040-06-080-3-0-A 30261574

40 6 21 27 120 36 10 26 M6 1,0 MTC-SK040-06-120-3-0-A 30261590

40 6 21 27 160 36 10 26 M6 1,1 MTC-SK040-06-160-3-0-A 30261591

40 7 21 27 80 36 10 26 M6 1,3 MTC-SK040-07-080-3-0-A 30267108



Design: Permissible run-out variation on the taper shank in relation to the clamping diameter d1 = 0.003 mm. The clamping diameter is designed for a shank tolerance of h6. Normal setting Form AD, if Form B is required, please state with the order.



Shrink chucks ThermoChuckShank ISO in accordance with DIN 69871 Form AD/B

Nominal size

ISO

Dimensions G Weight

kg


d1 d2 d3 l1 l2 l3 l4

Dimensions in mm.


144

l1

d 3d 2d 1l3 l4

l

G

4,5°

2

40 8 21 27 80 36 10 26 M6 1,0 MTC-SK040-08-080-3-0-A 30261575

40 8 21 27 120 36 10 26 M6 1,1 MTC-SK040-08-120-3-0-A 30261592

40 8 21 27 160 36 10 26 M6 1,3 MTC-SK040-08-160-3-0-A 30261593

40 9 21 27 80 36 10 26 M6 1,0 MTC-SK040-09-080-3-0-A 30267109

40 10 24 32 80 41 10 31 M8x1 1,0 MTC-SK040-10-080-3-0-A 30261576

40 10 24 32 120 41 10 31 M8x1 1,2 MTC-SK040-10-120-3-0-A 30261594

40 10 24 32 160 41 10 31 M8x1 1,5 MTC-SK040-10-160-3-0-A 30261595

40 11 24 32 80 41 10 31 M8x1 1,0 MTC-SK040-11-080-3-0-A 30267110

40 12 24 32 80 47 10 37 M10x1 1,0 MTC-SK040-12-080-3-0-A 30261577

40 12 24 32 120 47 10 37 M10x1 1,2 MTC-SK040-12-120-3-0-A 30261596

40 12 24 32 160 47 10 37 M10x1 1,5 MTC-SK040-12-160-3-0-A 30261597

40 13 24 32 80 47 10 37 M10x1 1,0 MTC-SK040-13-080-3-0-A 30267112

40 14 27 34 80 47 10 37 M10x1 1,0 MTC-SK040-14-080-3-0-A 30261578

40 14 27 34 120 47 10 37 M10x1 1,3 MTC-SK040-14-120-3-0-A 30261598

40 14 27 34 160 47 10 37 M10x1 1,6 MTC-SK040-14-160-3-0-A 30261599

40 15 27 34 80 47 10 37 M10x1 1,0 MTC-SK040-15-080-3-0-A 30267113

40 16 27 34 80 50 10 40 M12x1 1,0 MTC-SK040-16-080-3-0-A 30261579

40 16 27 34 120 50 10 40 M12x1 1,3 MTC-SK040-16-120-3-0-A 30261600

40 16 27 34 160 50 10 40 M12x1 1,6 MTC-SK040-16-160-3-0-A 30261601

40 18 33 42 80 50 10 40 M12x1 1,1 MTC-SK040-18-080-3-0-A 30260195

40 18 33 42 120 50 10 40 M12x1 1,5 MTC-SK040-18-120-3-0-A 30261602

40 18 33 42 160 50 10 40 M12x1 1,7 MTC-SK040-18-160-3-0-A 30261603

40 20 33 42 80 52 10 42 M16x1 1,1 MTC-SK040-20-080-3-0-A 30261581

40 20 33 42 120 52 10 42 M16x1 1,5 MTC-SK040-20-120-3-0-A 30261604

40 20 33 42 160 52 10 42 M16x1 1,8 MTC-SK040-20-160-3-0-A 30261605

40 25 44 53 100 58 10 48 M16x1 1,6 MTC-SK040-25-100-3-0-A 30261582

40 25 44 53 120 58 10 48 M16x1 1,8 MTC-SK040-25-120-3-0-A 30261606

40 25 44 53 160 58 10 48 M16x1 2,5 MTC-SK040-25-160-3-0-A 30261607

40 32 44 53 100 62 10 52 M16x1 1,4 MTC-SK040-32-100-3-0-A 30261583

40 32 44 53 120 62 10 52 M16x1 1,7 MTC-SK040-32-120-3-0-A 30261608

40 32 44 53 160 62 10 52 M16x1 2,4 MTC-SK040-32-160-3-0-A 30261610



Nominal size

ISO

Dimensions G Weight

kg


d1 d2 d3 l1 l2 l3 l4

Dimensions in mm.

145

50 3 10 20 80 12 2,7 MTC-SK050-03-080-3-0-W 30261611

50 3 10 20 120 12 2,8 MTC-SK050-03-120-3-0-W 30261612

50 3 10 20 160 12 3,0 MTC-SK050-03-160-3-0-W 30261613

50 4 15 25 80 16 2,7 MTC-SK050-04-080-3-0-W 30261614

50 4 15 22 120 16 2,8 MTC-SK050-04-120-3-0-W 30261615

50 4 15 22 160 16 3,0 MTC-SK050-04-160-3-0-W 30261616

50 5 15 25 80 20 2,7 MTC-SK050-05-080-3-0-W 30261617

50 5 15 22 120 20 2,8 MTC-SK050-05-120-3-0-W 30261618

50 5 15 22 160 20 3,0 MTC-SK050-05-160-3-0-W 30261619

50 6 21 27 80 36 10 26 M5 2,8 MTC-SK050-06-080-3-0-A 30261620

50 6 21 27 120 36 10 26 M5 2,9 MTC-SK050-06-120-3-0-A 30261621

50 6 21 27 160 36 10 26 M5 3,1 MTC-SK050-06-160-3-0-A 30261622

50 8 21 27 80 36 10 26 M6 2,8 MTC-SK050-08-080-3-0-A 30261623

50 8 21 27 120 36 10 26 M6 3,0 MTC-SK050-08-120-3-0-A 30261624

50 8 21 27 160 36 10 26 M6 3,1 MTC-SK050-08-160-3-0-A 30261625

50 10 24 32 80 41 10 31 M8x1 2,8 MTC-SK050-10-080-3-0-A 30261626

50 10 24 32 120 41 10 31 M8x1 3,0 MTC-SK050-10-120-3-0-A 30261627

50 10 24 32 160 41 10 31 M8x1 3,3 MTC-SK050-10-160-3-0-A 30261628

50 12 24 32 80 47 10 37 M10x1 2,8 MTC-SK050-12-080-3-0-A 30261629

50 12 24 32 120 47 10 37 M10x1 3,0 MTC-SK050-12-120-3-0-A 30261630



Nominal size

ISO

Dimensions G Weight

kg


d1 d2 d3 l1 l2 l3 l4

Dimensions in mm.


146

50 12 24 32 160 47 10 37 M10x1 3,3 MTC-SK050-12-160-3-0-A 30261631

50 14 27 34 80 47 10 37 M10x1 2,9 MTC-SK050-14-080-3-0-A 30261632

50 14 27 34 120 47 10 37 M10x1 3,1 MTC-SK050-14-120-3-0-A 30261633

50 14 27 34 160 47 10 37 M10x1 3,4 MTC-SK050-14-160-3-0-A 30261634

50 16 27 34 80 50 10 40 M12x1 2,9 MTC-SK050-16-080-3-0-A 30261635

50 16 27 34 120 50 10 40 M12x1 3,1 MTC-SK050-16-120-3-0-A 30261636

50 16 27 34 160 50 10 40 M12x1 3,5 MTC-SK050-16-160-3-0-A 30261637

50 18 33 42 80 50 10 40 M12x1 3,0 MTC-SK050-18-080-3-0-A 30261638

50 18 33 42 120 50 10 40 M12x1 3,3 MTC-SK050-18-120-3-0-A 30261639

50 18 33 42 160 50 10 40 M12x1 3,7 MTC-SK050-18-160-3-0-A 30261640

50 20 33 42 80 52 10 42 M16x1 3,0 MTC-SK050-20-080-3-0-A 30261641

50 20 33 42 120 52 10 42 M16x1 3,3 MTC-SK050-20-120-3-0-A 30261642

50 20 33 42 160 52 10 42 M16x1 3,7 MTC-SK050-20-160-3-0-A 30261643

50 25 44 53 100 58 10 48 M16x1 3,5 MTC-SK050-25-100-3-0-A 30261644

50 25 44 53 120 58 10 48 M16x1 3,8 MTC-SK050-25-120-3-0-A 30261645

50 25 44 53 160 58 10 48 M16x1 4,0 MTC-SK050-25-160-3-0-A 30261646

50 32 44 53 100 62 10 52 M16x1 3,3 MTC-SK050-32-100-3-0-A 30261647

50 32 44 53 120 62 10 52 M16x1 3,8 MTC-SK050-32-120-3-0-A 30261648

50 32 44 53 160 62 10 52 M16x1 4,0 MTC-SK050-32-160-3-0-A 30261649

l1

d 3d 2d 1

l3 l4l2

G

4,5°



Nominal size

ISO

Dimensions G Weight

kg


d1 d2 d3 l1 l2 l3 l4

Dimensions in mm.


Design: Normal setting Form AD, if Form B is required, please state with the order. Permissible run-out variation on the taper in relation to the clamping diameter d1 = 0.003 mm. The clamping diameter is designed for a shank tolerance of h6.


Balancing quality:

G 2.5 at 16,000 min-1

147

l1

d 3d 2d 1l3 l4

l2

G

4,5°

40 3 10 20 80 22 10 12 M6 0,9 MTC-SK040-03-080-3-0-A 30271294

40 4 15 25 80 26 10 16 M6 0,9 MTC-SK040-04-080-3-0-A 30271295

40 5 15 25 80 30 10 20 M6 0,9 MTC-SK040-05-080-3-0-A 30271296

40 6 21 27 80 36 10 26 M5 1,0 MTC-SK040-06-080-3-0-A 30271297

40 8 21 27 80 36 10 26 M6 1,0 MTC-SK040-08-080-3-0-A 30271298

40 10 24 32 80 41 10 31 M8x1 1,0 MTC-SK040-10-080-3-0-A 30271299

40 12 24 32 80 47 10 37 M10x1 1,0 MTC-SK040-12-080-3-0-A 30271300

40 14 27 34 80 47 10 37 M10x1 1,0 MTC-SK040-14-080-3-0-A 30271301

40 16 27 34 80 50 10 40 M12x1 1,0 MTC-SK040-16-080-3-0-A 30271302

40 18 33 42 80 50 10 40 M12x1 1,1 MTC-SK040-18-080-3-0-A 30271303

40 20 33 42 80 52 10 42 M16x1 1,1 MTC-SK040-20-080-3-0-A 30271304

40 25 44 53 100 58 10 48 M16x1 1,6 MTC-SK040-25-100-3-0-A 30271305

40 32 44 53 100 62 10 52 M16x1 1,4 MTC-SK040-32-100-3-0-A 30271306



Design: Normal setting Form AD, if Form B is required, please state with the order. Permissible run-out variation on the taper shank in relation to the clamping diameter d1 = 0.003 mm. The clamping diameter is designed for a shank tolerance of h6.




Nominal size

ISO

Dimensions G Weight

kg


d1 d2 d3 l1 l2 l3 l4

Dimensions in mm.

Design with 2 cooling duct bores

148

d 1 d 2l1 l2

�

��

�

40 22 48 35 19 1,1 MCA-SK040-22-035-3-0-W 10066833 10066837

40 27 50 35 21 1,1 MCA-SK040-27-035-3-0-W 10066834 10066838

40 32 78 50 24 1,7 MCA-SK040-32-050-3-0-W 10066835 10066839

40* 40 89 50 27 1,9 MCA-SK040-40-050-3-0-W 10066836 10066840

40* 60** 140 70 27 4,3 MCA-SK040-60-070-3-0-W 10011328

50 22 48 35 19 3,1 MCA-SK050-22-035-3-0-W 10073552 10073747

50 27 60 35 21 3,3 MCA-SK050-27-035-3-0-W 10073743 10073748

50 32 78 35 24 3,7 MCA-SK050-32-035-3-0-W 10073744 10073749

50 40 89 50 27 4,3 MCA-SK050-40-050-3-0-W 10073745 10073750

50 60 129 70 40 5,0 MCA-SK050-60-070-3-0-W 10073746 10073751

22 M10 10006016 30326178 MT1013-01 10005640 M4x10 - 12.9 10003583

27 M12 10005164 30326179 MT1215-01 10005165 M4x16 - 12.9 10003586

32 M16 10004065 30326180 MT1422-01 10004063 M5x16 - 12.9 10003601

40 M20 10004066 30326181 MT1623-01 10004064 M5x16 - 12.9 10003601

60 M30 10017544 MT2625-01 10010103 M12x25 - 12.9 10003675


Milling cutter arbors with enlarged face connection diameterShank ISO in accordance with DIN 69871 Form AD/B

Nominal

size

ISO

Dimensions Weight

kg

Specification Order No. with

milling cutter

clamping screw1

Order No. without

milling cutter

clamping screw2d1 d2 l1 l2

Dimensions in mm.

For arbor

diameter

Milling cutter

clamping screw

in accordance with DIN

Milling cutter clamping screw

with internal coolant supply (e.g.

for MAPAL WWS milling heads)

Key block Fastening screw

in accordance with ISO 4762

d1 Size Order No. Order No. Specification Order No. Size Order No.

Dimensions in mm.

Spare parts

Supply includes: 1Attached key blocks and milling cutter clamping screw in accordance with DIN 6367, does not include pull stud. 2Attached key blocks, does not include milling cutter clamping screw or pull stud. Bores for coolant supply in accordance with Form B sealed on delivery with threaded pins.

Design: Permissible run-out variation on the steep taper in relation to the arbor diameter d1 = 0.008 mm.

Note: The sizes marked with * have 4 additional threaded bores for mounting cutter heads with tool fastening in accordance with DIN 2079. **d1 60 mm for nominal size ISO40: maximum milling head diameter D = 250 mm. For assembly tools see page 233. For pull studs see page 224.


149

l1

d 2

d 1

l2

30 0,3 - 8 36 73 70 0,7 DCT-08-A MPC-SK030-08-073-0-0-W 30259829

40 0,3 - 8 36 73 70 1,3 DCT-08-A MPC-SK040-08-073-0-0-W 30259830

30 0,5 - 13 50 117 111 1,5 DCT-13-A MPC-SK030-13-117-0-0-W 30259831

40 0,5 - 13 50 96 90 1,6 DCT-13-A MPC-SK040-13-096-0-0-W 30259832

45 0,5 - 13 50 96 90 2,4 DCT-13-A MPC-SK045-13-096-0-0-W 30259833

50 0,5 - 13 50 112 106 4,1 DCT-13-A MPC-SK050-13-112-0-0-W 30259834

40 2,5 - 16 57 101 95 1,8 DCT-16-A MPC-SK040-16-101-0-0-W 30259835

45 2,5 - 16 57 101 95 2,6 DCT-16-A MPC-SK045-16-101-0-0-W 30259836

50 2,5 - 16 57 117 111 4,3 DCT-16-A MPC-SK050-16-117-0-0-W 30259837


Precision-DrillChuckShank ISO in accordance with DIN 69871 Form A without internal coolant supply

Nominal size

ISO

Dimensions Weight

kg

Spare part

code


d1 d2 l1 l2

Dimensions in mm.

Usage: For clamping tools with smooth cylindrical shanks.

Supply includes: Does not include sealing disc or coolant tube. Includes hexagonal T-key.

Design: No internal coolant supply.

Note: For spare parts in accordance with spare part code see page 222-223. For pull studs see page 224.

150

l1

d 2

d 1l2

30 0,5 - 13 50 96 90 1,2 DCT-13-A MPC-SK030-13-096-0-0-W 30259838

30 0,5 - 13 50 117 111 1,5 DCT-13-A MPC-SK030-13-117-0-0-W 30259839

30 2,5 - 16 57 101 95 1,4 DCT-16-A MPC-SK030-16-101-0-0-W 30259840

30 2,5 - 16 57 122 116 1,4 DCT-16-A MPC-SK030-16-122-0-0-W 30259841

40 0,5 - 13 50 96 90 1,6 DCT-13-A MPC-SK040-13-096-0-0-W 30259842

40 2,5 - 16 57 101 95 1,8 DCT-16-A MPC-SK040-16-101-0-0-W 30259843


Precision-DrillChuckShank ISO in accordance with DIN 69871 Form A for machining wood without internal coolant supply

Nominal size

ISO

Dimensions Weight

kg

Spare part

code


d1 d2 l1 l2

Dimensions in mm.



Design: No internal coolant supply.


151

l2

l1

d 2

d 1

40 0,3 - 8 36 76 73 1,3 DCT-08-B MPC-SK040-08-076-3-0-W 30259844

40 0,5 - 13 50 96 90 1,7 DCT-13-B MPC-SK040-13-096-3-0-W 30259845

45 0,5 - 13 50 102 96 2,5 DCT-13-B MPC-SK045-13-102-3-0-W 30259846

50 0,5 - 13 50 112 106 3,9 DCT-13-B MPC-SK050-13-112-3-0-W 30259847

40 2,5 - 16 57 101 95 1,9 DCT-16-B MPC-SK040-16-101-3-0-W 30259848

45 2,5 - 16 57 107 101 2,7 DCT-16-B MPC-SK045-16-107-3-0-W 30259849

50 2,5 - 16 57 117 111 4,1 DCT-16-B MPC-SK050-16-117-3-0-W 30259850


Precision-DrillChuckShank ISO in accordance with DIN 69871 Form AD/B with internal coolant supply

Nominal size

ISO

Dimensions Weight

kg

Spare part

code


d1 d2 l1 l2

Dimensions in mm.



Design: With internal coolant supply.


152

l2

d 2

d 1l1

40 0,3 - 8 36 78 73 1,3 DCT-08-A MPC-SK040-08-078-3-0-W 30259851

40 0,5 - 13 50 96 90 1,7 DCT-13-A MPC-SK040-13-096-3-0-W 30259852

45 0,5 - 13 50 102 96 2,5 DCT-13-A MPC-SK045-13-102-3-0-W 30259853

50 0,5 - 13 50 112 106 3,9 DCT-13-A MPC-SK050-13-112-3-0-W 30259854

40 2,5 - 16 57 101 95 1,9 DCT-16-A MPC-SK040-16-101-3-0-W 30259855

45 2,5 - 16 57 107 101 2,7 DCT-16-A MPC-SK045-16-107-3-0-W 30259856

50 2,5 - 16 57 117 111 4,1 DCT-16-A MPC-SK050-16-117-3-0-W 30259857


Precision-DrillChuckShank ISO in accordance with DIN 69871 Form AD/B with internal coolant supply

Nominal size

ISO

Dimensions Weight

kg

Spare part

code


d1 d2 l1 l2

Dimensions in mm.



Design: With central coolant supply and decentral coolant outlet for tools without coolant ducts.


153

l2

l1

d 2

d 1

40 0,5 - 13 57 119 113 1,7 DCT-13-D MPC-SK040-13-119-1-0-W 30259966

40 2,5 - 16 57 124 113 1,9 DCT-16-D MPC-SK040-16-124-1-0-W 30259967


Precision-DrillChuckShank ISO in accordance with DIN 69871 with internal coolant supply

Nominal size

ISO

Dimensions Weight

kg

Spare part

code


d1 d2 l1 l2

Dimensions in mm.



Design: With internal coolant supply.


154

d 1

l3

l2

l1


CFS replaceable head holdersCFS 101 (cylindrical design) with CFS connection, shank ISO in accordance with DIN 69871 with internal coolant supply

Nominal size

ISO

Connection size

CFS

Dimensions Material Specification Order No.

d1 l1 l2 l3

Dimensions in mm.

40 6 7,8 108,4 15 40 Steel CFS101N-06-040-SK40-A-S 30394001

40 8 9,8 108,4 15 40 Steel CFS101N-08-040-SK40-A-S 30394002

40 10 11,8 113,4 20 45 Steel CFS101N-10-045-SK40-A-S 30394003

40 12 15,8 118,4 25 50 Steel CFS101N-12-050-SK40-A-S 30394004

40 16 19,8 118,4 25 50 Steel CFS101N-16-050-SK40-A-S 30394005

40 20 24,8 118,4 25 50 Steel CFS101N-20-050-SK40-A-S 30394006

155

d 1

HSK

-C

l1

30 32 37 40 0,5 KS-AD-SK030-HSK-C032-040-01 30319737

30 40 45 60 0,9 KS-AD-SK030-HSK-C040-060-01 30319738

40 32 37 40 1,0 KS-AD-SK040-HSK-C032-040-01 30319739

40 40 45 40 1,0 KS-AD-SK040-HSK-C040-040-01 30319740

40 50 55 60 1,4 KS-AD-SK040-HSK-C050-060-01 30319741

40 63 70 75 1,8 KS-AD-SK040-HSK-C063-075-01 30319742

45 32 37 40 1,5 KS-AD-SK045-HSK-C032-040-01 30319743

45 40 45 40 1,6 KS-AD-SK045-HSK-C040-040-01 30319744

45 50 55 40 1,8 KS-AD-SK045-HSK-C050-040-01 30319745

45 63 70 60 2,2 KS-AD-SK045-HSK-C063-060-01 30319746

45 80 87 80 3,0 KS-AD-SK045-HSK-C080-080-01 30319747

50 32 37 40 2,7 KS-AD-SK050-HSK-C032-040-01 30319748

50 40 45 40 2,8 KS-AD-SK050-HSK-C040-040-01 30319749

50 50 55 40 2,9 KS-AD-SK050-HSK-C050-040-01 30319750

50 63 70 40 3,0 KS-AD-SK050-HSK-C063-040-01 30319751

50 80 87 80 4,6 KS-AD-SK050-HSK-C080-080-01 30319752

50 100 110 95 6,1 KS-AD-SK050-HSK-C100-095-01 30319753


KS steep taper adaptersShank ISO in accordance with DIN 69871 Form AD

Dimensions in mm.

Usage: For use in the machine spindle for mounting HSK tools.

Supply includes: Complete with standard KS clamping cartridge and stop ring, does not include pull stud.

Design: Permissible run-out variation on the steep taper in relation to the HSK internal taper 0.003 mm.

Note: For clamping cartridges see section on manual HSK clamping units. For stop rings see page 202. For pull studs see page 224.


Nominal size

ISO

Nominal size

HSK-C

Dimensions Weight

kg


d1 l1

156

d 1H

SK-C

l1

30 32 37 55 0,6 KS-AD-SK030-HSK-C032-055-02 30319754

30 40 45 60 0,8 KS-AD-SK030-HSK-C040-060-02 30319755

40 32 37 55 1,1 KS-AD-SK040-HSK-C032-055-02 30319756

40 40 45 60 1,1 KS-AD-SK040-HSK-C040-060-02 30319757

40 50 55 65 1,4 KS-AD-SK040-HSK-C050-065-02 30319758

40 63 70 75 1,9 KS-AD-SK040-HSK-C063-075-02 30319759

45 32 37 55 1,7 KS-AD-SK045-HSK-C032-055-02 30319760

45 40 45 60 1,9 KS-AD-SK045-HSK-C040-060-02 30319761

45 50 55 75 2,5 KS-AD-SK045-HSK-C050-075-02 30319762

45 63 70 75 2,6 KS-AD-SK045-HSK-C063-075-02 30319763

45 80 87 85 3,4 KS-AD-SK045-HSK-C080-085-02 30319764

50 32 37 55 2,9 KS-AD-SK050-HSK-C032-055-02 30319765

50 40 45 60 3,0 KS-AD-SK050-HSK-C040-060-02 30319766

50 50 55 65 3,2 KS-AD-SK050-HSK-C050-065-02 30319767

50 63 70 75 3,8 KS-AD-SK050-HSK-C063-075-02 30319768

50 80 87 85 4,8 KS-AD-SK050-HSK-C080-085-02 30319769

50 100 110 100 6,3 KS-AD-SK050-HSK-C100-100-02 30319770


KS steep taper adaptersShank ISO in accordance with DIN 69871 Form B

Nominal size

ISO

Nominal size

HSK-C

Dimensions Weight

kg


d1 l1

Dimensions in mm.

Usage: For use in the machine spindle for mounting HISO tools.

Supply includes: Complete with standard KS clamping cartridge and stop ring, does not include pull stud.

Design: Permissible run-out variation on the steep taper in relation to the HISO internal taper 0.003 mm.

Note: For clamping cartridges see section on manual HSK clamping units. For stop rings see page 202. For pull studs see page 224.


157

G1

l1

G

D

��

30* 60 50 M5 M8x1 AD 0,8 OS-AD-SK030-MOD060-050-11 30319771

30* 60 50 M5 M8x1 B 0,8 OS-AD-SK030-MOD060-050-12 30319772

30* 70 50 M6 M8x1 AD 0,9 OS-AD-SK030-MOD070-050-11 30319773

30* 70 50 M6 M8x1 B 0,9 OS-AD-SK030-MOD070-050-12 30319774

40 60 50 M5 M8x1 AD/B 1,3 OS-AD-SK040-MOD060-050-13 10058658















60-80 4 10075355

100-140 4 10075099

40, 45, 50 2 M5x5 10036757


Steep taper adaptersShank ISO in accordance with DIN 69871 Form AD/B

Nominal size

ISO

Module

diameter

D

Dimen-

sion

l1

G G1 Shape Weight

kg


Dimensions in mm.

Dimensions in mm.

Usage: For use in the machine spindle for mounting KS flange adapters, shrink chucks, hydraulic chucks, chucks for cylindrical shanks or tools with a modular shank in accordance with MAPAL works standard.

Supply includes: Complete with threaded pins for aligning the radial run-out, does not include pull stud.

Design: * Steep taper size ISO30 is not available in combined design AD/B! Normal setting Form AD, if Form B is required, please state with the order. Due to threaded pins the radial run-out of a connection or tool fitted can be adjusted exactly in relation to the steep taper.

Note: For suitable KS flange adapter in accordance with MAPAL works standard see page 102 and 103. For suitable chucks for cylindrical shanks see page 105. For suitable hydraulic chucks see page 106. For suitable shrink chucks ThermoChuck see page 107. For pull studs see page 224.


For module diameter

DQuantity required

Threaded pin

order no.

Spare parts

Dimensions in mm.

For nominal size

ISO

Quantity

required


Size Order No.

Clamping tools with ISO Chucks - MAPAL Clamping tools with ISO MAPAL has a wide range of products in...

Documents

Transcript of Clamping tools with ISO Chucks - MAPAL Clamping tools with ISO MAPAL has a wide range of products in...