clamping devices - HAINBUCH · HAINBUCH clamping devices Flexibility is trump system The HAINBUCH...

clamping devicesfor INDEX and TRAUB machines

2 www.hainbuch.com

Machines are Picky Too…

Are you looking for the correct clamping device for your Index or TrAub Machine?Then we have the answer. With our standard chucks or special solut ions we can make your machine work more efficient ly . Also, we know the specific clamping solut ions for t he INDEX MS and V-Series very well and match them perfect ly to your needs.

How can we achieve this ?HAINBUCH have more than 60 years’ experience in developing clamping solut ions and we are always focused on the essent ials, your interests. Shorter set-up t imes and cost savings, flexibility, increased product ivity, energy efficiency and safety. This is what you receive with our HAINBUCH products, including CE marking and a promise to protect t he environment.

3www.hainbuch.com

contentThe HAInbuCH modular system 4HAInbuCH clamping devices for Index machines* 6

ABC 6A100 7A200 8C100 10C200 11G200 14R200 16R300 18G160 20G250 22G300 26

HAInbuCH clamping devices for TrAub machines 30TNA 300 30TNA 400 33TNA 500 36TNC 42 38TNC 65 39TNX 65/42 40TNX 80/65 42TNL 18 43TNK 36 44TNL 26K 45

HAInbuCH clamping devices in overview 46Order 48Contact 49

* Please note: For all clamping devices without an INDEX order number an extra threaded adapter is required.

4 www.hainbuch.com

HAINBUCH clamping devices

Clamping devices

rotating

Clamping element

Adaptation clamping device

TOPlus chuck

Clamping head – O.D. clamping

MANDO Adapt mandrel – I.D. clamping

Jaw adapter – clamping in front of the chuck

SPANNTOP chuck

TOROK manual chuck

�� Circumferent ial clamping�� 3 different versions: for raw material, precision machining, and for in-house machining�� An abundance of profile clamping possibilit ies�� Coolant-resistant, rubber-metal connect ion, prevents chips in the chuck�� In stock

�� Quick change-over from O.D. to I.D. clamping without adjust ing, due to CENTREX interface�� Concentricity < 0.005 mm can be achieved between chuck taper and mandrel taper�� 7 different mandrel sizes �� Clamping range Ø 13 – 120 mm�� Available with and without draw bolt�� In stock

�� Approx. double the clamping Ø can be realized�� Drilling and milling between the jaws�� Installat ion and removal with tapered bolts – without changing fixture�� Loading plug for in-house machining of the soft jaws

The HAINBUCH modular system

5www.hainbuch.com

HAINBUCH clamping devices

Flexibility is trump

system

The HAINBUCH modular system

Clamping head change-over [15 sec.]

Change-over to mandrel adaptation [2 min.]

Change-over to jaw adapter [4 min.]

Clamping device with clamping head

Remove clamping head Clamping device without clamping head

Insert clamping head Clamping device set-up

Remove clamping head Insert MANDO Adapt Place on segmented clamping bushing

Screw in draw bolt Clamping device set-up

Remove clamping head Insert centering Insert jaw adapter Secure jaw adapter Clamping device set-up

6 www.hainbuch.com

Index AbC: Compact production turning machine for universal parts��Bar capacity 42, 60 or 65 mm� Two tool systems with X- and Z-axis, synchronized spindle � Bar loading magazine or handling possible

Chucks. ABC - D42

Product Figure Size Variant Spindle nose

Outer Ø [mm]

Total length [mm]

Max. radial

clamping force [kN]

RPM n max.

[1/min.]

INDEX Order no.

In stock Order no.

SPANNTOP nova chuck 42 Combi

pull-back KK5 144 122 80 7000 ✔ 2613/0009

Machine specific SPANNTOP chucks

42

Combi deadlength

KK5133 120

80 7000900401.0422 ✔ 2613/0009

Modular 135 81 900442.0002 ✔ 2611/0024

Chucks. ABC - D60


Outer Ø [mm]

Total length [mm]

Max. radial

clamping force [kN]

RPM n max.

[1/min.]

INDEX Order no.

In stock

Order no.

Machine specific SPANNTOP chucks 65

Combi pull-back

AP85145

111105

6000

✔ 2612/0004

Combi deadlength 160 85 900401.0601 ✔ 2603/0002

Modular AP140 148 81 105 900460.0002 ✔ 2611/0023

HAINBUCH clamping devicesfor Index machines

Chucks. ABC - D65


Outer Ø [mm]

Total length [mm]

Max. radial

clamping force [kN]

RPM n max.

[1/min.]

INDEX Order no.

In stock Order no.


deadlength AP140 161 130 105 6000 ✔ 2713/0006


65

Combi pull-back

AP140 148121

105 6000✔ 2612/0010

Modular 81 900465.0041 ✔ 2611/0025

7www.hainbuch.com


Index A100: Production turning machine for semi complex parts��Bar capacity with 42 mm � Up to four tool carriages with X- and Z-axis� Bar loading magazine or handling possible

Chucks. A100


Outer Ø [mm]

Total length [mm]

Max. radial

clamping force [kN]

RPM n max.

[1/min.]

INDEX Order no.

In stock

Order no.


deadlength KK5 145 90 80 7000 900401.0424 ✔ 2713/0001


42

Combi pull-back

KK5 140

90

80 7000

900412.0421 ✔ 2712/0002

Modular 81 900442.0041 ✔ 2711/0002

8 www.hainbuch.com


Index A200: Production turning machine for semi complex parts��Bar capacity with 65 or 90 mm � Up to four tool carriages with X- and Z-axis� Bar loading magazine or handling possible

Chucks. A200 - D65


Outer Ø [mm]

Total length [mm]

Max. radial

clamping force [kN]

RPM n max.

[1/min.]

In stock Order no.

TOPlus chuck

65

Combi pull-back

AP140

160 120

120 6000

✔ 2902/0005

Combi deadlength 165 135 ✔ 2903/0004

Modular 160 110 ✔ 2901/0005

SPANNTOP nova chuck

65

Combi pull-back

AP140

160 120

105 6000

✔ 2702/0019


Modular 160 110 ✔ 2701/0018

80 Combi deadlength 179 145 115 5500 ✔ 2703/0018

Mandrels. A200 - D65

Product Figure Size Clamping range [mm]

Total length [mm]

Max. radial clamping force

[kN]

RPM n max.

[1/min.]

In stock Order no.

MANDO T212 XXS 8 – 13 93

427000

✔ 2802/0012XS 13 – 19 95,00 ✔ 2802/0013S 16 – 21 97,00 ✔ 2802/00140 20 – 28 108,00 ✔ 2802/00151 26 – 38 114,00 ✔ 2802/00162 36 – 54 132,00 85 ✔ 2802/00173 50 – 80 140,00 105 6000 ✔ 2802/0018

MANDO T211 0 20 – 28 10042

7000✔ 2801/0014

1 26 – 38 110 ✔ 2801/00162 36 – 54 130 85 ✔ 2801/0018

3 50 – 80 140 105 6000 ✔ 2801/0020

Flange

✔ 2099/0006

9www.hainbuch.com


Chucks. A200 - D90


Outer Ø [mm]

Total length [mm]

Max. radial clamping force [kN]

RPM n max.

[1/min.]

In stock Order no.

TOPlus chuck

65

Combi pull-back

KK8

210

131

120 6000

✔ 2902/0003

Combi deadlength 135 ✔ 2903/0003

Modular 121 ✔ 2901/0003

100

Combi pull-back 235 159

172 5000

✔ 2902/0012


Modular 235 149 ✔ 2901/0011

SPANNTOP nova chuck

65

Combi pull-back

KK8

210

131

105 6000

✔ 2702/0009


Modular 121 ✔ 2701/0009

80

Combi pull-back 140

115 5500✔ 2702/0011


100


150 5000

✔ 2702/0013


Modular 235 149 ✔ 2701/0012

Mandrels. A200 - D90


Total length [mm]


[kN]

RPM n max.

[1/min.]

In stock Order no.

MANDO T212 XXS 8 – 13 93

42 7000

✔ 2802/0012XS 13 – 19 95,00 ✔ 2802/0013S 16 – 21 97,00 ✔ 2802/00140 20 – 28 108,00 ✔ 2802/00151 26 – 38 114,00 ✔ 2802/00162 36 – 54 132,00 85 ✔ 2802/00173 50 – 80 140,00 105

6000✔ 2802/0018

4 69 – 100 150,50 150 ✔ 2802/0019MANDO T211 0 20 – 28 100

427000

✔ 2801/00141 26 – 38 110 ✔ 2801/00162 36 – 54 130 85 ✔ 2801/00183 50 – 80 140 105 6000 ✔ 2801/00204 70 – 120 155 150 ✔ 2801/0024

Flange

✔ 2099/0004

10 www.hainbuch.com

Index C100: Production turning machine for complex parts��Main and counter spindle with 30 or 42 mm� Three tool carriers with two Y-axes � Innovat ive guide system INDEX SingleSlide

Chucks. C100 - D30


Outer Ø [mm]

Total length [mm]

Max. radial

clamping force [kN]

RPM n max.

[1/min.]

INDEX Order no.

In stock

Order no.

SPANNTOP nova chuck

32

Combi pull-back

KK4 11290

709000 900412.0301 ✔ 2712/0005

Modular 74 10000 900432.0011 ✔ 2711/0004

Chucks. C100 - D42


Outer Ø [mm]

Total length [mm]

Max. radial

clamping force [kN]

RPM n max.

[1/min.]

INDEX Order no.

In stock

Order no.

TOPlus chuck

52 Modular KK5 140 71 94 7000 - 2911/0001

SPANNTOP nova chuck

42

Combi pull-back KK6 140

8080 7000

900412.0422 ✔ 2712/0013

Combi dead-length

KK5 145

900401.0425 ✔ 2713/0004

900401.0423 ✔ 2713/0005

90 900401.0424 ✔ 2713/0001


Combi pull-back

KK5 140

90

80 7000

900412.0421 ✔ 2712/0002

Modular 71 900442.0031 ✔ 2611/0027


11www.hainbuch.com

Index C200: Production turning machine for complex parts��Main and counter spindle with 65 or 90 mm� Three tool carriers with two Y-axes � Innovat ive guide system INDEX SingleSlide

Chucks. C200 - D65


Outer Ø [mm]

Total length [mm]

Max. radial

clamping force [kN]

RPM n max.

[1/min.]

INDEX Order no.

In stock Order no.

TOPlus chuck

65

Combi pull-back

AP140

160 120

120 6000

✔ 2902/0005


Modular 148 80 - 2911/0002

SPANNTOP nova chuck

65

Combi pull-back

AP140

160 120105 6000

✔ 2702/0019

Combi dead-length

161 112 900401.0653

✔ 2713/0002

80 179 145 115 5500 ✔ 2703/0018


65 Modular AP140 148 81 105 6000 900465.0051

✔ 2611/0022

Mandrels. C200 - D65


Total length [mm]


[kN]

RPM n max. [1/min.]

In stock Order no.

MANDO T212

XXS 8 – 13 93

427000

✔ 2802/0012XS 13 – 19 95,00 ✔ 2802/0013S 16 – 21 97,00 ✔ 2802/00140 20 – 28 108,00 ✔ 2802/00151 26 – 38 114,00 ✔ 2802/00162 36 – 54 132,00 85 ✔ 2802/00173 50 – 80 140,00 105 6000 ✔ 2802/0018


12 www.hainbuch.com


Total length [mm]


[kN]

RPM n max. [1/min.]

In stock Order no.

MANDO T211 0 20 – 28 10042

7000

✔ 2801/0014

1 26 – 38 110 ✔ 2801/0016

2 36 – 54 130 85 ✔ 2801/0018

3 50 – 80 140 105 6000 ✔ 2801/0020

Flange

✔ 2099/0006

Chucks. C200 - D90


Outer Ø

[mm]

Total length [mm]

Max. radial

clamping force [kN]

RPM n max.

[1/min.]

INDEX Order

no.

In stock

Order no.

TOPlus chuck

65

Combi pull-back

KK8 210

131

120 6000

✔ 2902/0003


SPANNTOP nova chuck

65Combi

pull-back

KK8 210

131105 6000

✔ 2702/0009

Modular 121 ✔ 2701/0009

80

Combi pull-back 140

115 5500

✔ 2702/0011


Modular 130 ✔ 2701/0011


100 Modular KK8 210 110 150 5000 900465. 0022 ✔ 2611/0018


13www.hainbuch.com


Total length [mm]


[kN]

RPM n max.

[1/min.]

In stock Order no.

MANDO T212 XXS 8 – 13 93

427000

✔ 2802/0012XS 13 – 19 95,00 ✔ 2802/0013S 16 – 21 97,00 ✔ 2802/00140 20 – 28 108,00 ✔ 2802/00151 26 – 38 114,00 ✔ 2802/00162 36 – 54 132,00 85 ✔ 2802/00173 50 – 80 140,00 105

6000✔ 2802/0018

4 69 – 100 150,50 150 ✔ 2802/0019MANDO T211 0 20 – 28 100

427000

✔ 2801/00141 26 – 38 110 ✔ 2801/00162 36 – 54 130 85 ✔ 2801/00183 50 – 80 140 105

6000✔ 2801/0020

4 70 – 120 150 150 ✔ 2801/0024

Flange

✔ 2099/0004


Mandrels. C200 - D90

14 www.hainbuch.com

Index G200: Compact Turn-Mill center for complete machining��Main and counter spindle with 42, 60 and 65 mm� Max. two tool carriers [X,Z,Y,B] and milling spindle possible � Turning length 400 mm

Chucks. G200 - D42


Outer Ø [mm]

Total length [mm]

Max. radial

clamping force [kN]

RPM n max.

[1/min.]

INDEX Order no.

In stock Order no.


pull-back KK5 144 122 80 700 ✔ 2702/0027


Combi deadlength

KK5133 120

80 7000

900401. 0422

✔ 2613/0009

Modular 135 81 900442. 0002

✔ 2611/0024

Mandrels. G200 - D42


Total length [mm]


[kN]

RPM n max.

[1/min.]

In stock Order no.

MANDO T212 XXS 8 – 13 93

427000

✔ 2802/0012

XS 13 – 19 95,00 ✔ 2802/0013

S 16 – 21 97,00 ✔ 2802/0014

0 20 – 28 108,00 ✔ 2802/0015

1 26 – 38 114,00 ✔ 2802/0016

2 36 – 54 132,00 85 ✔ 2802/0017

3 50 – 80 140,00 105 6000 ✔ 2802/0018

MANDO T211 0 20 – 28 10042

7000

✔ 2801/0014

1 26 – 38 110 ✔ 2801/0016

2 36 – 54 130 85 ✔ 2801/0018

3 50 – 80 140 105 6000 ✔ 2801/0020

Flange

✔ 2099/0002


15www.hainbuch.com

Chucks. G200 - D60


Outer Ø [mm]

Total length [mm]

Max. radial

clamping force [kN]

RPM n max.

[1/min.]

INDEX Order no.

In stock Order no.

TOPlus chuck

65

Combi pull-back

AP140

160 120

120 6000

✔ 2902/0005



Combi pull-back

AP85145

111105

6000

✔ 2612/0004

Combi deadlength 160 85 900401.

0601✔ 2603/0002

ModularAP140

148 81 105 900460. 0002

✔ 2611/0023

100 Combi pull-back 170 122 150 5000 ✔ 2612/0011



Total length [mm]


[kN]

RPM n max.

[1/min.]

In stock Order no.

MANDO T212 XXS 8 – 13 93

427000

✔ 2802/0012XS 13 – 19 95,00 ✔ 2802/0013S 16 – 21 97,00 ✔ 2802/00140 20 – 28 108,00 ✔ 2802/00151 26 – 38 114,00 ✔ 2802/00162 36 – 54 132,00 85 ✔ 2802/00173 50 – 80 140,00 105 6000 ✔ 2802/0018

MANDO T211 0 20 – 28 10042

7000✔ 2801/0014

1 26 – 38 110 ✔ 2801/00162 36 – 54 130 85 ✔ 2801/0018

3 50 – 80 140 105 6000 ✔ 2801/0020

Flange

✔ 2099/0006


Chucks. G200 - D65


Outer Ø [mm]

Total length [mm]

Max. radial

clamping force [kN]

RPM n max.

[1/min.]

INDEX Order no.

In stock

Order no.


deadlength AP140 161 130 105 6000 ✔ 2713/0006


65

Combi pull-back

AP140 148121

105 6000✔ 2612/0010

Modular 81 900465. 0041 ✔ 2611/0025

If the machine was built in 2010 or later, the spindle may be identical to C200 - D65.

16 www.hainbuch.com


Index r200: Turn-Mill Center for milling and turning in a new dimension��Simultaneous milling operat ions on main and counter spindle� 5-axis-interpolat ion for both milling spindles [available]

Chucks. R200 - D65


Outer Ø [mm]

Total length [mm]

Max. radial

clamping force [kN]

RPM n max.

[1/min.]

INDEX Order

no.

In stock

Order no.

TOPlus chuck

65

Combi pull-back

AP140

160 120

120 6000

✔ 2902/0005


Modular 160 110 ✔ 2901/0005148 80 - 2911/0002

SPANNTOP nova chuck

65

Combi pull-back

AP140

160 120105 6000

✔ 2702/0019

Combi deadlength

161 112 900401.0653 ✔ 2713/0002

80 179 145 115 5500 ✔ 2703/0018


65 Modular AP140 148 81 105 6000 900465.0051 ✔ 2611/0022

Mandrels. R200 - D65


Total length [mm]


RPM n max.

[1/min.]

In stock Order no.

MANDO T212 XXS 8 – 13 93

42 7000

✔ 2802/0012XS 13 – 19 95,00 ✔ 2802/0013S 16 – 21 97,00 ✔ 2802/00140 20 – 28 108,00 ✔ 2802/00151 26 – 38 114,00 ✔ 2802/00162 36 – 54 132,00 85 ✔ 2802/00173 50 – 80 140,00 105 6000 ✔ 2802/0018

17www.hainbuch.com



Total length [mm]


[kN]

RPM n max.

[1/min.]

In stock Order no.

MANDO T211 0 20 – 28 10042

7000

✔ 2801/0014

1 26 – 38 110 ✔ 2801/0016

2 36 – 54 130 85 ✔ 2801/0018

3 50 – 80 140 105 6000 ✔ 2801/0020

Flange

✔ 2099/0006

18 www.hainbuch.com


Index r300: Turn-Mill Center for milling and turning in a new dimension��Simultaneous milling operat ions on main and counter spindle� 5-axis-interpolat ion for both milling spindles [available]

Chucks. R300 - D102


Outer Ø [mm]

Total length [mm]

Max. radial

clamping force [kN]

RPM n max.

[1/min.]

INDEX Order

no.

In stock

Order no.

TOPlus chuck

65

Combi pull-back

KK8

210

131

120 6000

✔ 2902/0003


100


172 5000

✔ 2902/0012


SPANNTOP nova chuck

65

Combi pull-back

KK8

210

155

105 6000

900412. 0652 ✔ 2712/0007


80

Combi pull-back 140

115 5500

✔ 2702/0011


100


150 5000

900412. 1022 ✔ 2712/0011


Jaw chuck260

B-Top AP220

260 123,3 115 4000 ✔ 3015/0003

315 315 3600 ✔ 3015/0004

Flange for jaw chuck 260/315 B-Top KK8 ✔ 2083/0012

19www.hainbuch.com


Mandrels. R300 - D102


Total length [mm]


[kN]

RPM n max. [1/min.]

In stock Order no.

MANDO T212 XXS 8 – 13 93

427000

✔ 2802/0012

XS 13 – 19 95,00 ✔ 2802/0013

S 16 – 21 97,00 ✔ 2802/0014

0 20 – 28 108,00 ✔ 2802/0015

1 26 – 38 114,00 ✔ 2802/0016

2 36 – 54 132,00 85 ✔ 2802/0017

3 50 – 80 140,00 1056000

✔ 2802/0018

4 69 – 100 150,50 150 ✔ 2802/0019

MANDO T211 0 20 – 28 10042

7000

✔ 2801/0014

1 26 – 38 110 ✔ 2801/0016

2 36 – 54 130 85 ✔ 2801/0018

3 50 – 80 140 1056000

✔ 2801/0020

4 70 – 120 155 150 ✔ 2801/0024

Flange

✔ 2099/0004

20 www.hainbuch.com

Index G160: Turn-Mill Center for demanding parts��Main and counter spindle with 42 and 65 mm � Max. three tool carriers [X,Z,Y,B], mult ifunct ional unit and

motor milling spindle possible � Turning length 800 mm

Chucks. G160 - D42


Outer Ø [mm]

Total length [mm]

Max. radial

clamping force [kN]

RPM n max.

[1/min.]

INDEX Order

no.

In stock

Order no.


pull-back KK5 144 122 80 7000 ✔ 2702/0027


Combi deadlength

KK5133 120

80 7000

900401. 0422 ✔ 2613/0009

Modular 135 81 900442. 0002 ✔ 2611/0024



Total length [mm]


RPM n max.

[1/min.]

In stock Order no.

MANDO T212 XXS 8 – 13 93

427000

✔ 2802/0012

XS 13 – 19 95,00 ✔ 2802/0013

S 16 – 21 97,00 ✔ 2802/0014

0 20 – 28 108,00 ✔ 2802/0015

1 26 – 38 114,00 ✔ 2802/0016

2 36 – 54 132,00 85 ✔ 2802/0017

3 50 – 80 140,00 105 6000 ✔ 2802/0018

MANDO T211 0 20 – 28 10042

7000

✔ 2801/0014

1 26 – 38 110 ✔ 2801/0016

2 36 – 54 130 85 ✔ 2801/0018

3 50 – 80 140 105 6000 ✔ 2801/0020

Flange

✔ 2099/0002


21www.hainbuch.com

Chucks. G160 - D65


Outer Ø [mm]

Total length [mm]

Max. radial

clamping force [kN]

RPM n max.

[1/min.]

INDEX Order

no.

In stock

Order no.

TOPlus chuck

65

Combi pull-back

AP140160 120

120 6000✔ 2902/0005

Modular 148 80 - 2911/0002

SPANNTOP nova chuck

65

Combi pull-back

AP140

160 120

105 6000

✔ 2702/0019

Combi deadlength 161 112 900401.

0653 ✔ 2713/0002


65 Modular AP140 148 81 105 6000 900465.0051 ✔ 2611/0022



Total length [mm]


[kN]

RPM n max.

[1/min.]

In stock Order no.

MANDO T212 XXS 8 – 13 93

427000

✔ 2802/0012

XS 13 – 19 95,00 ✔ 2802/0013

S 16 – 21 97,00 ✔ 2802/0014

0 20 – 28 108,00 ✔ 2802/0015

1 26 – 38 114,00 ✔ 2802/0016

2 36 – 54 132,00 85 ✔ 2802/0017

3 50 – 80 140,00 105 6000 ✔ 2802/0018

MANDO T211 0 20 – 28 10042

7000

✔ 2801/0014

1 26 – 38 110 ✔ 2801/0016

2 36 – 54 130 85 ✔ 2801/0018

3 50 – 80 140 1056000

✔ 2801/0020

4 70 – 120 155 150 ✔ 2801/0024

Flange

✔ 2099/0006


22 www.hainbuch.com

Index G250: Productive high performance Turn-Mill Center

��Main and counter spindle with 65, 90 and 102 mm � Max. three tool carriers [X,Z,Y,B], mult ifunct ional unit and

motor milling spindle possible � Turning length 800 and 1400 mm


Chucks. G250 - D65


Outer Ø [mm]

Total length [mm]

Max. radial

clamping force [kN]

RPM n max.

[1/min.]

INDEX Order

no.

In stock

Order no.

TOPlus chuck

65

Combi pull-back

KK6

165

130

120 6000

✔ 2902/0002


100


172 5000

✔ 2902/0011


SPANN-TOP nova chuck 65

Combi pull-back

KK6

165

155

105 6000

900412. 0650 ✔ 2712/0009

Combi deadlength

135

✔ 2703/0008

80

Combi pull-back 180

115 5500

✔ 2702/0010


100


150 5000

900412. 1020 ✔ 2712/0010


Jaw chuck

260 B-Top AP220 260 123,3 115 4000 ✔ 3015/0003

Flange for jaw chuck

260/315 B-Top KK6 ✔ 2083/0011

23www.hainbuch.com



Total length [mm]


RPM n max.

[1/min.]

In stock Order no.

MANDO T212 XXS 8 – 13 93

427000

✔ 2802/0012XS 13 – 19 95,00 ✔ 2802/0013S 16 – 21 97,00 ✔ 2802/00140 20 – 28 108,00 ✔ 2802/00151 26 – 38 114,00 ✔ 2802/00162 36 – 54 132,00 85 ✔ 2802/00173 50 – 80 140,00 105

6000✔ 2802/0018

4 69 – 100 150,50 150 ✔ 2802/0019MANDO T211 0 20 – 28 100

427000

✔ 2801/00141 26 – 38 110 ✔ 2801/00162 36 – 54 130 85 ✔ 2801/00183 50 – 80 140 105

6000✔ 2801/0020

4 70 – 120 155 150 ✔ 2801/0024

Flange

✔ 2099/0004


Chucks. G250 - D90


Outer Ø

[mm]

Total length [mm]

Max. radial

clamping force [kN]

RPM n max.

[1/min.]

INDEX Order

no.

In stock

Order no.

TOPlus chuck

65

Combi pull-back

KK8

210131

120 6000✔ 2902/0003


100


172 5000✔ 2902/0012


SPANNTOP nova chuck

65

Combi pull-back

KK8

210

155105 6000

900412.0651 ✔ 2712/0008


80

Combi pull-back 140

115 5500✔ 2702/0011


100


150 5000

900412.1021 ✔ 2712/0012


Jaw chuck260

B-Top AP220

260 123,3 115 4000 ✔ 3015/0003

315 315 3600 ✔ 3015/0004


24 www.hainbuch.com




Total length [mm]


[kN]

RPM n max. [1/min.]

In stock Order no.

MANDO T212 XXS 8 – 13 93

427000

✔ 2802/0012XS 13 – 19 95,00 ✔ 2802/0013S 16 – 21 97,00 ✔ 2802/00140 20 – 28 108,00 ✔ 2802/00151 26 – 38 114,00 ✔ 2802/00162 36 – 54 132,00 85 ✔ 2802/00173 50 – 80 140,00 105

6000✔ 2802/0018

4 69 – 100 150,50 150 ✔ 2802/0019MANDO T211 0 20 – 28 100

427000

✔ 2801/00141 26 – 38 110 ✔ 2801/00162 36 – 54 130 85 ✔ 2801/00183 50 – 80 140 105

6000✔ 2801/0020

4 70 – 120 155 150 ✔ 2801/0024

Flange

✔ 2099/0001

Chucks. G250 - D102


Outer Ø

[mm]

Total length [mm]

Max. radial

clamping force [kN]

RPM n max.

[1/min.]

INDEX Order no.

In stock Order no.

TOPlus chuck

65

Combi pull-back

KK8

210131

120 6000✔ 2902/0003


100


172 5000✔ 2902/0012


SPANNTOP nova chuck

65

Combi pull-back

KK8

210

155105 6000

900412.0652

✔ 2712/0007


80

Combi pull-back 140

115 5500✔ 2702/0011


100


150 5000

900412.1022

✔ 2712/0011


Jaw chuck260

B-Top AP220

260 123,3 115 4000 ✔ 3015/0003

315 315 3600 ✔ 3015/0004


25www.hainbuch.com




Total length [mm]


[kN]

RPM n max.

[1/min.]

In stock Order no.

MANDO T212 XXS 8 – 13 93

427000

✔ 2802/0012

XS 13 – 19 95,00 ✔ 2802/0013

S 16 – 21 97,00 ✔ 2802/0014

0 20 – 28 108,00 ✔ 2802/0015

1 26 – 38 114,00 ✔ 2802/0016

2 36 – 54 132,00 85 ✔ 2802/0017

3 50 – 80 140,00 1056000

✔ 2802/0018

4 69 – 100 150,50 150 ✔ 2802/0019

MANDO T211 0 20 – 28 10042

7000

✔ 2801/0014

1 26 – 38 110 ✔ 2801/0016

2 36 – 54 130 85 ✔ 2801/0018

3 50 – 80 140 1056000

✔ 2801/0020

4 70 – 120 155 150 ✔ 2801/0024

Flange

✔ 2099/0004

26 www.hainbuch.com


Index G300: Powerful Turn-Mill Center in two dimensions��Main and counter spindle with 65, 90 and 102 mm � Max. three tool carriers [X,Z,Y,B] and milling spindle possible� Turning length 710 and 1250 mm

Chucks. G300 - D65


Outer Ø

[mm]

Total length [mm]

Max. radial

clamping force [kN]

RPM n max.

[1/min.]

INDEX Order

no.

In stock

Order no.

TOPlus chuck

65

Combi pull-back

KK6

165130

120 6000✔ 2902/0002


100


172 5000✔ 2902/0011



deadlength

KK6

165135

105 6000 ✔ 2703/0008

80

Combi pull-back 180

115 5500✔ 2702/0010


100

Combi pull-back 235

155

150 5000

✔ 2702/0012

159 900412. 1020 ✔ 2712/0010



65 Modular KK6 184 101 105 6000 900465. 0021 ✔ 2611/0014

Jaw chuck

260 B-Top AP220 260 123,3 115 4000 ✔ 3015/0003


27www.hainbuch.com




Total length [mm]


[kN]

RPM n max.

[1/min.]

In stock Order no.

MANDO T212 XXS 8 – 13 93

427000

✔ 2802/0012XS 13 – 19 95,00 ✔ 2802/0013S 16 – 21 97,00 ✔ 2802/00140 20 – 28 108,00 ✔ 2802/00151 26 – 38 114,00 ✔ 2802/00162 36 – 54 132,00 85 ✔ 2802/00173 50 – 80 140,00 105

6000✔ 2802/0018

4 69 – 100 150,50 150 ✔ 2802/0019MANDO T211 0 20 – 28 100

427000

✔ 2801/00141 26 – 38 110 ✔ 2801/00162 36 – 54 130 85 ✔ 2801/00183 50 – 80 140 105

6000✔ 2801/0020

4 70 – 120 155 150 ✔ 2801/0024

Flange

✔ 2099/0001

Chucks. G300 - D90


Outer Ø [mm]

Total length [mm]

Max. radial clam-ping force [kN]

RPM n max.

[1/min.]

INDEX Order no.

In stock Order no.

TOPlus chuck

65

Combi pull-back

KK8

210131

120 6000✔ 2902/0003


100


172 5000

✔ 2902/0012


Modular 235 149 ✔ 2901/0011

SPANNTOP nova chuck

65

Combi pull-back

KK8

210

131105 6000

✔ 2702/0009


80

Combi pull-back 140

115 5500✔ 2702/0011


100


150 5000

900412.1021 ✔ 2712/0012



100 Modular KK8 210 110 150 5000 900465.0022 ✔ 2611/0018

28 www.hainbuch.com



Outer Ø [mm]

Total length [mm]

Max. radial

clamping force [kN]

RPM n max.

[1/min.]

INDEX Order no.

In stock

Order no.

Jaw chuck 260

B-Top AP220

260 123,3 115 4000 ✔ 3015/0003

315 315 3600 ✔ 3015/0004




Total length [mm]


[kN]

RPM n max.

[1/min.]

In stock Order no.

MANDO T212

XXS 8 – 13 93

427000

✔ 2802/0012XS 13 – 19 95,00 ✔ 2802/0013S 16 – 21 97,00 ✔ 2802/00140 20 – 28 108,00 ✔ 2802/00151 26 – 38 114,00 ✔ 2802/00162 36 – 54 132,00 85 ✔ 2802/00173 50 – 80 140,00 105

6000✔ 2802/0018

4 69 – 100 150,50 150 ✔ 2802/0019MANDO T211

0 20 – 28 10042

7000✔ 2801/0014

1 26 – 38 110 ✔ 2801/00162 36 – 54 130 85 ✔ 2801/00183 50 – 80 140 105

6000✔ 2801/0020

4 70 – 120 155 150 ✔ 2801/0024

Flange

✔ 2099/0004

Chucks. G300 - D102


Outer Ø [mm]

Total length [mm]

Max. radial

clamping force [kN]

RPM n max.

[1/min.]

INDEX Order

no.

In stock

Order no.

TOPlus chuck

65

Combi pull-back

KK8

210131

120 6000✔ 2902/0003


100


172 5000

✔ 2902/0012


Modular 235 149 ✔ 2901/0011

29www.hainbuch.com



Outer Ø

[mm]

Total length [mm]

Max. radial

clamping force [kN]

RPM n max.

[1/min.]

INDEX Order

no.

In stock

Order no.


deadlength

KK8

210

135 105 6000 ✔ 2703/0009

80

Combi pull-back 140

115 5500✔ 2702/0011


100


150 5000

900412. 1022 ✔ 2712/0011



100 Modular KK8 110 150 5000 ✔ 2611/0028

Jaw chuck260

B-Top AP220

260 123,3 115 4000 ✔ 3015/0003

315 315 3600 ✔ 3015/0004




Total length [mm]


[kN]

RPM n max.

[1/min.]

In stock Order no.

MANDO T212 XXS 8 – 13 93

427000

✔ 2802/0012XS 13 – 19 95,00 ✔ 2802/0013S 16 – 21 97,00 ✔ 2802/00140 20 – 28 108,00 ✔ 2802/00151 26 – 38 114,00 ✔ 2802/00162 36 – 54 132,00 85 ✔ 2802/00173 50 – 80 140,00 105

6000✔ 2802/0018

4 69 – 100 150,50 150 ✔ 2802/0019MANDO T211 0 20 – 28 100

427000

✔ 2801/00141 26 – 38 110 ✔ 2801/00162 36 – 54 130 85 ✔ 2801/00183 50 – 80 140 105

6000

✔ 2801/0020

4 70 – 120155

150 ✔ 2801/0024

Flange

✔ 2099/0004

30 www.hainbuch.com

TnA 300��The introductory model for universal turning� Available with a 42 mm or 65 mm bar capacity� Equipment variants: Y-axis and tailstock

Chucks. TNA 300 - 42


Outer Ø [mm]

Total length [mm]

Max. radial

clamping force [kN]

RPM n max.

[1/min.]

In stock Order no.


pull-back KK5 144 122 94 7000 ✔ 2702/0005


42Combi dead-length

KK5 135 106 80 7000 ✔ 2613/0003

Jaw chuck

165 B-Top AP140 165 6000 ✔ 3015/0001

Flange for jaw chuck 165 B-Top KK5 ✔ 2083/0005

HAINBUCH clamping devicesfor TrAub machines

Mandrels. TNA 300 - 42


Total length [mm]


[kN]

RPM n max. [1/min.]

In stock Order no.

MANDO T212 XXS 8 – 13 93

42 7000

✔ 2802/0012XS 13 – 19 95,00 ✔ 2802/0013S 16 – 21 97,00 ✔ 2802/00140 20 – 28 108,00 ✔ 2802/00151 26 – 38 114,00 ✔ 2802/00162 36 – 54 132,00 85 ✔ 2802/00173 50 – 80 140,00 105 6000 ✔ 2802/00184 69 – 100 150,50 150 ✔ 2802/0019

31www.hainbuch.com


Total length [mm]


[kN]

RPM n max. [1/min.]

In stock Order no.

MANDO T211 0 20 – 28 10042

7000

✔ 2801/0014

1 26 – 38 110 ✔ 2801/0016

2 36 – 54 130 85 ✔ 2801/0018

3 50 – 80 140 1056000

✔ 2801/0020

4 70 – 120 155 150 ✔ 2801/0024

Flange

✔ 2099/0002



Outer Ø [mm]

Total length [mm]

Max. radial

clamping force [kN]

RPM n max.

[1/min.]

In stock Order no.

TOPlus chuck

65

Combi pull-back

KK6

165130

120 6000✔ 2902/0002


100


172 5000✔ 2902/0011

Combi dead-length 220 175 ✔ 2903/0006

SPANNTOP nova chuck 65

Combi pull-back

KK6

165 130 105 6000 ✔ 2702/0008

80180 135

115 5500✔ 2702/0010


100


150 5000✔ 2702/0012


Jaw chuck

215

B-Top

AP170 215 5400

✔ 3015/0002

B-Top3 ✔ 3016/0001


215

B-Top

KK6

✔ 2083/0008

B-Top3 ✔ 2083/0001


32 www.hainbuch.com



Total length [mm]


[kN]

RPM n max.

[1/min.]

In stock Order no.

MANDO T212

XXS 8 – 13 93

427000

✔ 2802/0012

XS 13 – 19 95,00 ✔ 2802/0013

S 16 – 21 97,00 ✔ 2802/0014

0 20 – 28 108,00 ✔ 2802/0015

1 26 – 38 114,00 ✔ 2802/0016

2 36 – 54 132,00 85 ✔ 2802/0017

3 50 – 80 140,00 1056000

✔ 2802/0018

4 69 – 100 150,50 150 ✔ 2802/0019

MANDO T211

0 20 – 28 10042

7000

✔ 2801/0014

1 26 – 38 110 ✔ 2801/0016

2 36 – 54 130 85 ✔ 2801/0018

3 50 – 80 140 1056000

✔ 2801/0020

4 70 – 120 155 150 ✔ 2801/0024

Flange

✔ 2099/0001


33www.hainbuch.com

TnA 400��Allrounder in universal turning: powerful cutt ing and

comprehensive machining opt ions. � The high-performance main spindle with a maximum

of 485 Nm torque� Thru hole capacity 80 mm� Optional: 100 mm Y-axis path



Outer Ø [mm]

Total length [mm]

Max. radial

clamping force [kN]

RPM n max.

[1/min.]

In stock Order no.

TOPlus chuck

65

Combi pull-back

KK6

165

130

120 6000

✔ 2902/0002


100


172 5000

✔ 2902/0011


SPANNTOP nova chuck

65 Combi pull-back

KK6

165 130 105 6000 ✔ 2702/0008

80

180 135

115 5500

✔ 2702/0010


100


150 5000

✔ 2702/0012


Jaw chuck

215

B-Top

AP170 215 5400

✔ 3015/0002

B-Top3 ✔ 3016/0001


215B-Top

KK6✔ 2083/0008

B-Top3 ✔ 2083/0001


34 www.hainbuch.com



Total length [mm]


[kN]

RPM n max.

[1/min.]

In stock Order no.

MANDO T212 XXS 8 – 13 93

427000

✔ 2802/0012

XS 13 – 19 95,00 ✔ 2802/0013

S 16 – 21 97,00 ✔ 2802/0014

0 20 – 28 108,00 ✔ 2802/0015

1 26 – 38 114,00 ✔ 2802/0016

2 36 – 54 132,00 85 ✔ 2802/0017

3 50 – 80 140,00 1056000

✔ 2802/0018

4 69 – 100 150,50 150 ✔ 2802/0019

MANDO T211 0 20 – 28 10042

7000

✔ 2801/0014

1 26 – 38 110 ✔ 2801/0016

2 36 – 54 130 85 ✔ 2801/0018

3 50 – 80 140 1056000

✔ 2801/0020

4 70 – 120 155 150 ✔ 2801/0024

Flange

✔ 2099/0001



Outer Ø [mm]

Total length [mm]

Max. radial

clamping force [kN]

RPM n max.

[1/min.]

In stock

Order no.

TOPlus chuck

100

Combi pull-back

KK8

235 159

172 5000

✔ 2902/0012


Modular 235 149 ✔ 2901/0011

SPANNTOP nova chuck

80

Combi deadlength

KK8

210145

115 5500✔ 2703/0011

Modular 130 ✔ 2701/0011

100


150 5000

✔ 2702/0013


Modular 235 149 ✔ 2701/0012


80 Combi pull-back KK8 210 155 115 5500 ✔ 2612/0009


35www.hainbuch.com


Outer Ø [mm]

Total length [mm]


RPM n max.

[1/min.]

In stock Order no.

Jaw chuck

215

B-Top

AP170 215 5400

✔ 3015/0002

B-Top3 ✔ 3016/0001

260 B-Top AP220 260 123,3 115 4000 ✔ 3015/0003


215B-Top

KK6✔ 2083/0008

B-Top3 ✔ 2083/0001

260/315 B-Top KK8 ✔ 2083/0012



Total length [mm]


[kN]

RPM n max.

[1/min.]

In stock Order no.

MANDO T212

XXS 8 – 13 93

427000

✔ 2802/0012

XS 13 – 19 95,00 ✔ 2802/0013

S 16 – 21 97,00 ✔ 2802/0014

0 20 – 28 108,00 ✔ 2802/0015

1 26 – 38 114,00 ✔ 2802/0016

2 36 – 54 132,00 85 ✔ 2802/0017

3 50 – 80 140,00 1056000

✔ 2802/0018

4 69 – 100 150,50 150 ✔ 2802/0019

MANDO T211

0 20 – 28 10042

7000

✔ 2801/0014

1 26 – 38 110 ✔ 2801/0016

2 36 – 54 130 85 ✔ 2801/0018

3 50 – 80 140 1056000

✔ 2801/0020

4 70 – 120 155 150 ✔ 2801/0024

Flange

✔ 2099/0004


36 www.hainbuch.com

TnA 500��CNC universal lathe � Chuck sizes up to 315 mm� The crown turret with 12 stat ions, opt ional an individual

tool drive



Outer Ø [mm]

Total length [mm]

Max. radial

clamping force [kN]

RPM n max.

[1/min.]

In stock Order no.

TOPlus chuck

100

Combi pull-back

KK8

235 159

172 5000

✔ 2902/0012


Modular 235 149 ✔ 2901/0011

SPANNTOP nova chuck

80

Combi deadlength

KK8

210

145

115 5500

✔ 2703/0011

Modular 130 ✔ 2701/0011

100


150 5000

✔ 2702/0013


Modular 235 149 ✔ 2701/0012


80 Combi pull-back KK8 210 155 115 5500 ✔ 2612/0009

Jaw chuck260

B-Top AP220

260 123,3 115 4000 ✔ 3015/0003

315 315 3600 ✔ 3015/0004



37www.hainbuch.com



Total length [mm]


[kN]

RPM n max. [1/min.]

In stock Order no.

MANDO T212

XXS 8 – 13 93

427000

✔ 2802/0012

XS 13 – 19 95,00 ✔ 2802/0013

S 16 – 21 97,00 ✔ 2802/0014

0 20 – 28 108,00 ✔ 2802/0015

1 26 – 38 114,00 ✔ 2802/0016

2 36 – 54 132,00 85 ✔ 2802/0017

3 50 – 80 140,00 1056000

✔ 2802/0018

4 69 – 100 150,50 150 ✔ 2802/0019

MANDO T211

0 20 – 28 10042

7000

✔ 2801/0014

1 26 – 38 110 ✔ 2801/0016

2 36 – 54 130 85 ✔ 2801/0018

3 50 – 80 140 1056000

✔ 2801/0020

4 70 – 120 155 150 ✔ 2801/0024

Flange

✔ 2099/0004


38 www.hainbuch.com

TnC 42��The introductory model for universal turning for the modern

turning and cutt ing process � Maximum configurat ion with 2 turrets and 6 axes

Chucks. TNC 42 - 42


Outer Ø [mm]

Total length [mm]


RPM n max.

[1/min.]

In stock

Order no.


pull-back KK5 144 122 80 7000 ✔ 2702/0003


42 Combi deadlength KK5 135 106 80 7000 ✔ 2613/0003

Mandrels. TNC 42 - 42


Total length [mm]


[kN]

RPM n max. [1/min.]

In stock

Order no.

MANDO T212

XXS 8 – 13 93

427000

✔ 2802/0012

XS 13 – 19 95,00 ✔ 2802/0013

S 16 – 21 97,00 ✔ 2802/0014

0 20 – 28 108,00 ✔ 2802/0015

1 26 – 38 114,00 ✔ 2802/0016

2 36 – 54 132,00 85 ✔ 2802/0017

3 50 – 80 140,00 105 6000 ✔ 2802/0018

MANDO T211

0 20 – 28 10042

7000

✔ 2801/0014

1 26 – 38 110 ✔ 2801/0016

2 36 – 54 130 85 ✔ 2801/0018

3 50 – 80 140 105 6000 ✔ 2801/0020

Flange

✔ 2099/0002


39www.hainbuch.com

TnC 65��The introductory model for universal turning for the modern

turning and cutt ing process � Maximum configurat ion with 2 turrets and 6 axes

Chucks. TNC 65 - 65


Outer Ø [mm]

Total length [mm]


RPM n max.

[1/min.]

In stock

Order no.

TOPlus chuck

65

Combi pull-back

KK6

165 130

120 6000

✔ 2902/0002

Combi deadlength 160 106 - 2913/0001

SPANNTOP nova chuck 65

Combi pull-back

KK6165 130

105 6000✔ 2702/0008



65 Combi deadlength KK6 160 110 105 6000 ✔ 2613/0004


Mandrels. TNC 65 - 65


Total length [mm]


[kN]

RPM n max. [1/min.]

In stock Order no.

MANDO T212

XXS 8 – 13 93

427000

✔ 2802/0012XS 13 – 19 95,00 ✔ 2802/0013S 16 – 21 97,00 ✔ 2802/00140 20 – 28 108,00 ✔ 2802/00151 26 – 38 114,00 ✔ 2802/00162 36 – 54 132,00 85 ✔ 2802/00173 50 – 80 140,00 105 6000 ✔ 2802/0018

MANDO T211

0 20 – 28 10042

7000✔ 2801/0014

1 26 – 38 110 ✔ 2801/00162 36 – 54 130 85 ✔ 2801/0018

3 50 – 80 140 105 6000 ✔ 2801/0020

Flange

✔ 2099/0001

40 www.hainbuch.com

Tnx 65/42��The economic modular building block system� Available with two, three or four platen� Tool carriers that can all be opt ionally equipped with a Y-axis

Chucks. TNX 65/42 - 42


Outer Ø

[mm]

Total length [mm]

Max. radial

clamping force [kN]

RPM n max.

[1/min.]

TRAUB Order

no.

In stock

Order no.

SPANNTOP nova chuck

52 Combi pull-back

KK5144

122 94 7000 ✔ 2702/0005

65 KK6 120 105 6000 326285 ✔ 2712/0006


42 Combi deadlength KK5

135 10680 7000

323626 ✔ 2613/0003

133 120 ✔ 2613/0009

Mandrels. TNX 65/42 - 42


Total length [mm]


[kN]

RPM n max. [1/min.]

In stock Order no.

MANDO T212 XXS 8 – 13 93

427000

✔ 2802/0012

XS 13 – 19 95,00 ✔ 2802/0013

S 16 – 21 97,00 ✔ 2802/0014

0 20 – 28 108,00 ✔ 2802/0015

1 26 – 38 114,00 ✔ 2802/0016

2 36 – 54 132,00 85 ✔ 2802/0017

3 50 – 80 140,00 1056000

✔ 2802/0018

4 69 – 100 150,50 150 ✔ 2802/0019

MANDO T211 0 20 – 28 10042

7000

✔ 2801/0014

1 26 – 38 110 ✔ 2801/0016

2 36 – 54 130 85 ✔ 2801/0018

3 50 – 80 140 1056000

✔ 2801/0020

4 70 – 120 155 150 ✔ 2801/0024

Flange

✔ 2099/0002


41www.hainbuch.com




Outer Ø [mm]

Total length [mm]


RPM n max.

[1/min.]

In stock Order no.

TOPlus chuck

65

Combi pull-back

KK6

165 119

120 6000

- 2912/0001


Modular 165 120 ✔ 2901/0002

SPANNTOP nova chuck

65

Combi pull-back

KK6

165 119

105 6000

- 2712/0015



65 Modular KK6 140 120 105 6000 ✔ 2711/0001



Total length [mm]


[kN]

RPM n max.

[1/min.]

In stock Order no.

MANDO T212 XXS 8 – 13 93

427000

✔ 2802/0012

XS 13 – 19 95,00 ✔ 2802/0013

S 16 – 21 97,00 ✔ 2802/0014

0 20 – 28 108,00 ✔ 2802/0015

1 26 – 38 114,00 ✔ 2802/0016

2 36 – 54 132,00 85 ✔ 2802/0017

3 50 – 80 140,00 1056000

✔ 2802/0018

4 69 – 100 150,50 150 ✔ 2802/0019

MANDO T211 0 20 – 28 10042

7000

✔ 2801/0014

1 26 – 38 110 ✔ 2801/0016

2 36 – 54 130 85 ✔ 2801/0018

3 50 – 80 140 1056000

✔ 2801/0020

4 70 – 120 155 150 ✔ 2801/0024

Flange

✔ 2099/0001

42 www.hainbuch.com


Tnx 80/65��The turning cutt ing machine with [almost] unlimited

possibilit ies� Maximum spindle opening of 80 mm� Four tool turrets and vert ical tool carriers



Outer Ø [mm]

Total length [mm]


RPM n max.

[1/min.]

In stock

Order no.

TOPlus chuck 65

Combi pull-back KK8

210 131 120 6000 ✔ 2902/0003

100 235 159 172 5000 ✔ 2902/0012

SPANNTOP nova chuck

65 Combi pull-back

KK8210

131 105 6000 ✔ 2702/0009

80

140

115 5500

✔ 2702/0011

Combi deadlength 127 2713/0009

Modular 130 ✔ 2701/0011

100 Combi pull-back 235 159 150 5000 ✔ 2702/0013



Total length [mm]


[kN]

RPM n max. [1/min.]

In stock Order no.

MANDO T212

XXS 8 – 13 93

42 7000

✔ 2802/0012XS 13 – 19 95,00 ✔ 2802/0013S 16 – 21 97,00 ✔ 2802/00140 20 – 28 108,00 ✔ 2802/00151 26 – 38 114,00 ✔ 2802/00162 36 – 54 132,00 85 ✔ 2802/00173 50 – 80 140,00 105 6000 ✔ 2802/00184 69 – 100 150,50 150 ✔ 2802/0019

MANDO T211

0 20 – 28 10042

7000

✔ 2801/00141 26 – 38 110 ✔ 2801/00162 36 – 54 130 85 ✔ 2801/00183 50 – 80 140 105

6000✔ 2801/0020

4 70 – 120 155 150 ✔ 2801/0024

Flange

✔ 2099/0004

43www.hainbuch.com

TnL 18��Sliding headstock automatic lathe� Thru hole capacity 20 mm� Simultaneous machining with up to 3 tools possible

Chucks. TNL 18

Product Figure Size Variant Outer Ø [mm]

Total length [mm]

Max. radial

clamping force [kN]

RPM n max.

[1/min.]

TRAUB Order no.

In stock

Order no.

TOPlus chuck

26

Combi pull-back 90 64 26 12000 908274 - 2912/0002

Combi dead-length

75 37 24 10000 908275 - 2913/0002

9060

35 12000 908276 - 2913/0003

Modular 80 34 10000 - 2911/0003


44 www.hainbuch.com

TnK 36��Strong benefits for economic machining of shorter parts� Diameter with a rod opening of 36 mm� Short chip-to-chip t imes of 0.55 sec.� Motor spindles with a maximum of 10.7 kW

Chucks. TNK 36


Outer Ø [mm]

Total length [mm]

Max. radial

clamping force [kN]

RPM n max.

[1/min.]

TRAUB Order

no.

In stock

Order no.


32 Modular

KK4

108

90

55 8000 ✔ 2611/0029

36 Combi deadlength 85 837315 ✔ 2613/0016


45www.hainbuch.com

TnL 26K��CNC short turning machine� Thru hole capacity 32 mm� No guide bushing in connect ion with the Z-axis required,

reduces setup t ime and tooling cost

Chucks. TNL 26K


Outer Ø [mm]

Total length [mm]

Max. radial

clamping force [kN]

RPM n max.

[1/min.]

TRAUB Order no.

In stock Order no.


32 Modular

KK4

108

90

55 8000 ✔ 2611/0029

36 Combi deadlength 85 837315 ✔ 2613/0016


46 www.hainbuch.com

TOPlus SPAnnTOP nova SPAnnTOP chuck b-Top3 b-Top MAndO T212 MAndO T211

Descript ionChuck of the future:

with hexagonal clamping geometry

The classic: clamping head/chuck solut ion

Clamping head/chuck solut ion especially for your

machine

3 jaw chuck with adaptat ions

3-jaw chuck without draw bolt with draw bolt

Sizes 52, 65, 100 32, 42, 52, 65, 80, 100 32, 42, 52, 65, 80, 100 215 165, 215, 260, 315 XXS, XS, S, 0, 1, 2, 3, 4 0, 1, 2, 3, 4Clamping range of all sizes [mm] 4 – 100 4 – 100 4 – 100 12 – 300 12 – 300 8 – 100 20 – 120

Variant SE [hexagonal] RD [round] RD [round]

Advantages ��25 % higher holding power than SPANNTOP

� Unequaled rigidity due to full-surface contact of the clamping segments

� No radial displacement between clamping head and chuck body, therefore it is resistant to contaminat ion

� Concentric precision < 0.015 mm possible

��Typical HAINBUCH features, such as user friendly set-up, full through-bore, parallel clamping, opt imal po-wer conversion, extreme rigidity and superior holding power, as well as minimal wear and tear


� Minimal inert ia loss effects

��Chucks are specially matched to one machine

� Type and model sat isfy the desires of the machi-ne manufacturer

� Typical HAINBUCH features, such as user friendly set-up, full through-bore, parallel clamping, opt imal po-wer conversion, extreme rigidity and superior holding power, as well as minimal wear and tear

��Extremely fast conversion [2 min.] to I.D. clamping with the MANDO Adapt mandrel-in-clamping-de-vice or to O.D. clamping with the SPANNTOP Adapt chuck

� Through-bore passage bushings or end-stop bushings that can be changed from the front

� Fast jaw change with individual unlocking at high change-over ac-curacy and suitable for the »Reishauer« system, straight gear cutt ing

� High degree of operator safety with minimum change-over t ime

��Large through-bore with passage bushings or end-stop bushings that can be changed from the front



� Proven wedge rod me-chanism

��Work piece stabilizat ion through axial draw force applied against the work piece end-stop

� Clamping without draw bolt, consequent ly ideal for blind bores

� Clamping range from Ø 8 – 100 mm with only 8 mandrel sizes


� Form-compensat ing segmented clamping bushings upon request


Clamping elements

Clamping head SE Clamping head RD Clamping head RD Jaws Jaws SB segmented clamping bushing

SAD segmented clamping bushing

SB segmented clamping bushing


MANDREX cartridge

Adaptations MANDO Adapt T211 SE [Mandrel-in-clamping-device, with draw bolt]

MANDO Adapt T212 SE [Mandrel-in-clam-ping-device, without draw bolt]

Jaw adapter SE

MANDO Adapt T211 RD [Mandrel-in-clamping-device, with draw bolt]

MANDO Adapt T212 RD [Mandrel-in-clamping-device, without draw bolt]

Jaw adapter RD

MANDO Adapt [Mandrel-in-jaw-chuck]

SPANNTOP Adapt [End-stop-chuck-in-jaw-chuck]

SPANNTOP Adapt M [Through-bore-chuck-in-jaw-chuck]

HAINBUCHStandard chucks in overview

47www.hainbuch.com

TOPlus SPAnnTOP nova SPAnnTOP chuck b-Top3 b-Top MAndO T212 MAndO T211

Descript ionChuck of the future:

with hexagonal clamping geometry

The classic: clamping head/chuck solut ion

Clamping head/chuck solut ion especially for your

machine

3 jaw chuck with adaptat ions

3-jaw chuck without draw bolt with draw bolt

Sizes 52, 65, 100 32, 42, 52, 65, 80, 100 32, 42, 52, 65, 80, 100 215 165, 215, 260, 315 XXS, XS, S, 0, 1, 2, 3, 4 0, 1, 2, 3, 4Clamping range of all sizes [mm] 4 – 100 4 – 100 4 – 100 12 – 300 12 – 300 8 – 100 20 – 120

Variant SE [hexagonal] RD [round] RD [round]

Advantages ��25 % higher holding power than SPANNTOP

� Unequaled rigidity due to full-surface contact of the clamping segments

� No radial displacement between clamping head and chuck body, therefore it is resistant to contaminat ion


��Typical HAINBUCH features, such as user friendly set-up, full through-bore, parallel clamping, opt imal po-wer conversion, extreme rigidity and superior holding power, as well as minimal wear and tear


� Minimal inert ia loss effects

��Chucks are specially matched to one machine

� Type and model sat isfy the desires of the machi-ne manufacturer

� Typical HAINBUCH features, such as user friendly set-up, full through-bore, parallel clamping, opt imal po-wer conversion, extreme rigidity and superior holding power, as well as minimal wear and tear

��Extremely fast conversion [2 min.] to I.D. clamping with the MANDO Adapt mandrel-in-clamping-de-vice or to O.D. clamping with the SPANNTOP Adapt chuck

� Through-bore passage bushings or end-stop bushings that can be changed from the front



��Large through-bore with passage bushings or end-stop bushings that can be changed from the front



� Proven wedge rod me-chanism


� Clamping without draw bolt, consequent ly ideal for blind bores



� Form-compensat ing segmented clamping bushings upon request


Clamping elements

Clamping head SE Clamping head RD Clamping head RD Jaws Jaws SB segmented clamping bushing


SB segmented clamping bushing


MANDREX cartridge

Adaptations MANDO Adapt T211 SE [Mandrel-in-clamping-device, with draw bolt]

MANDO Adapt T212 SE [Mandrel-in-clam-ping-device, without draw bolt]

Jaw adapter SE

MANDO Adapt T211 RD [Mandrel-in-clamping-device, with draw bolt]

MANDO Adapt T212 RD [Mandrel-in-clamping-device, without draw bolt]

Jaw adapter RD

MANDO Adapt [Mandrel-in-jaw-chuck]

SPANNTOP Adapt [End-stop-chuck-in-jaw-chuck]

SPANNTOP Adapt M [Through-bore-chuck-in-jaw-chuck]

HAINBUCHStandard chucks in overview

48 www.hainbuch.com

HAINBUCHContact

fax +49 [0]7144. 18826Complete, detach and send!

First name/Last name

Company/Department

Street/No.

ZIP Code/City

Phone

Fax

E-mail

Quantity Order No. Product Price

Date Stamp and signature

We will use your data to process your inquiry. We will also use that data to inform you about our products and services in writ ing. If you do not wish to be informed, please let us know by writ ing to:

HAINBUCH GMBH · SPANNENDE TECHNIK Postfach 1262 · DE-71667 Marbach

49www.hainbuch.com

HAINBUCHContact

bo Werner Bock KGCommercial Agency

Neue Reihe 2DE-33699 Bielefeld

Phone +49 [0]521. 924580Fax +49 [0]521. 9245899

E-mail: [email protected] Internet: www.werner-bock-kg.de

bs Bock & Strothmann GmbHCommercial Agency

Berliner Allee 49DE-30855 Langenhagen-Godshorn

Phone +49 [0]511. 781068Fax +49 [0]511. 782960

E-mail: [email protected]: www.bockundstrothmann.de

Fs Uwe FischerTechnical Consulting and Sales

Im Apfentäle 25DE-72525 Münsingen-Auingen

Phone +49 [0]7144. 907662Fax +49 [0]7381. 183783

E-mail: [email protected]

Ft Jörg FedtkeTechnical Consulting and Sales

Kunkelsberg 2DE-45239 Essen

Phone +49 [0]7144. 907661Fax +49 [0]7144. 2463839


Gg Winfried GoggTechnical Consulting and Sales

Kantstr. 1688471 Laupheim

Phone +49 [0]7144. 907673 Fax +49 [0]7144. 907872


Hb HAINBUCH GmbH Erdmannhäuser Straße 57DE-71672 Marbach

Phone +49 [0]7144. 907333Fax +49 [0]7144. 18826


He Thomas Helfer IndustrievertretungCommercial Agency

Gerwigstraße 4DE-76437 Rastatt

Phone +49 [0]7222. 916231Fax +49 [0]7222. 916240Mobile +49 [0]171. 2032559


Hen Anika HensenTechnical Consulting and Sales

Mühlenberg 15DE-53902 Münstereifel

Phone +49 [0]7144. 907675Fax +49 [0]7144. 18826

E-Mail: [email protected]

Hs Thomas HummelTechnical Consulting and Sales

Pfarrer-Hopp-Straße 1DE-93142 Pirkensee

Phone +49 [0]7144. 907674Fax +49 [0]7144. 907874


Mi Henry MierschTechnical Consulting and Sales

Feldstraße 51DE-06917 Jessen

Phone +49 [0]7144. 907664Fax +49 [0]3537. 200455


re Ulrich RemmelCommercial Agency

Gildestraße 18DE-58791 Werdohl

Phone +49 [0]2392. 93830Fax +49 [0]2392. 938317

E-mail: [email protected]: www.remmel.de

rt Renee Reuter Technical Consulting and Sales

Brühlstraße 7DE-73252 Lenningen

Phone +49 [0]7144. 907670Fax +49 [0]7026. 371871


Sb Benjamin SchuhTechnical Consulting and Sales

Am Erlengraben 39DE-91459 Markt Erlbach

Phone +49 [0]7144. 907672Fax +49 [0]7144. 907872


Si Michael SimonTechnical Consulting and Sales

Am Tannenberg 8DE-63776 Mömbris

Phone +49 [0]7144. 907667Fax +49 [0]6029. 994932


Sl Jörg Schlag Technical Consulting and Sales

Mart in-Drucker-Straße 21DE-04157 Leipzig

Phone +49 [0]7144. 907665Fax +49 [0]341.24689012


Ti Joerg Tittel Area Sales Manager

Wunnensteinstraße 10DE-71711 Steinheim/Murr

Phone +49 [0]7144. 907668Fax +49 [0]7144. 819864


Wt Werkzeug-Technik-NordCommercial Agency

Emmy-Noether-Str.1DE-24558 Henstedt-Ulzburg

Phone +49 [0]4193 8891780Fax +49 [0]4193 88917888


Kp Thomas KlumppArea Sales Manager

Hahnbergweg 15DE-72270 Baiersbronn

Phone +49 [0]7144. 907663Fax +49 [0]7447. 291131


Za Carsten ZanderArea Sales Manager

Friedrich-Ebert-Straße 9 DE-31848 Bad Münder

Phone +49 [0]7144. 907669Fax +49 [0]5042. 506751


ZIP Code

Mi 010-049 Sl 060-089 Mi 090-189 Wt 190-289 bs 290-319 bo 320-339 bs 340-349

Si 350-369 bs 370-399 Ft 400-479 bo 480-499 Ft 500-509

Hen 510-549 Si 550-559

Hen 560-569 re 570-599 Si 600-659 Ti 660-699 rt 700-709 rt 710-719 Fs 720-729

rt 730-739 Ti 740-749 He 750-799 Hs 800-819 Gg 820-829 Hs 830-859 Gg 860-879

Fs 880-899 Sb 900-919 Hs 920-949 Sb 950-969 Si 970-978 Ti 979 Sl 980-999

50 www.hainbuch.com

HAINBUCHContact

AsiaChinaHainbuch Shanghai Co. Ltd. Workholding Technology

1/F, West buildingNo. 388 East Kangqiao Rd.Pudong, Shanghai 201319

Phone +86 2120916384Fax +86 2120916383

E-mail: [email protected]: www.hainbuch.cn

India M´la Sales Corporat ion5, YeshwantnagarTelco-Century Enka Road411018 Pune

A.H. RaoManagement & Technology ConsultantGr.Fl. HNO 4157, 14th Main HAL 2nd Stage Indiranagar Bangalore 560 008

Phone +91 20 27477405Fax +91 20 27464249

Phone +91 25279551Fax +91 9986997959

E-mail: [email protected]: www.mla-sales.com


Indonesia PT. STAHL ARBEITWTC Mangga Dua 2nd Floor A-6JL. Mangga Dua Raya No. 8Jakarta 14430

Phone +62 21 3777 6622Fax. +62 21 3001 8070

E-mail: [email protected]: www.stahl-arbeit.com

Israel M.T.M. Machine Tools Market ing Ltd.31, Harbazel69710 Tel Aviv

Phone +972 36479560Fax +972 36479578

E-mail: [email protected]: www.mtm.co.il

Japan NK Works Co LTD2-17-17 Iwamoto-cho, Chiyoda-kuTokyo, 101-0032

Phone +81 338645411Fax +81 338646752

E-mail: [email protected]: www.nk-works.co.jp

Korea HIOIL E&T Co. Ltd. 160-5, Seokchon-dong, Songpa-gu Seoul, 138-844

Phone +82 24137911Fax +82 24137910

E-Mail: [email protected]: www.hainbuch.co.kr

Malaysia, Singapore & Vietnam

Jebsen & Jessen Technology [S] Pte Ltd.Process Engineering Division18 Enterprise RoadSingapur 629824

Phone +65 63053692Fax +65 63053699

E-mail: [email protected] Internet: www.jjsea.com

Taiwan GSTC Technology Co., Ltd.No. 418, Youn-Chun East 1st RdTaichung City 40877, Taiwan

Phone +88 6423805678Fax +88 6423805511

E-mail: [email protected]: www.gstctech.com.tw

ThailandPTT Precision Tools Co LtdHAInbuCH Workholding Solutions

Eastern Seaboard Ind. Est. Micro Fty. Ph 2 ESIE-Rd 14, 64/93, Moo 4, Tambon Pluak Daeng, Amphur Pluak Daeng Rayong 21140

Phone +66 2362 8656Mobile +66 818384 924Fax +66 2362 8656

E-mail: [email protected]: www.hainbuch.com

AustraliaAustralia Romheld Automation Pty Ltd

Unit 30 115 Woodpark RoadSmithfield . NSW. 2164

Phone +61 297211799Fax +61 297211766

E-mail: [email protected]: www.romheld.com.au

europeAustria GGW Gruber & Co. GmbH

Kolingasse 61090 Vienna

Phone +43 131075960Fax +43 1310759631

E-mail: [email protected]: www.ggwgruber.at

belgium BIS Technics bvba/sprlZevenputtenstraat 203690 Zutendaal

Phone +32 89518890Fax +32 89518899

E-mail: [email protected]: www.bistechnics.com

Czech republic TMC CR s.r.o.Masná 27/960200 Brno

Phone +420 548214572Fax +420 548217219

E-mail: [email protected]: www.tmccr.cz

denmark Jørn B. Herringe A/SRamsømagleSyvvejen 314621 Gadstrup

Phone +45 46170000Fax +45 46170001

E-mail: [email protected]: www.jbh-tools.dk

estoniaLatviaLithuania

DV-Tools OÜPeterburi tee 34/411415 Tallinn

Phone +372 6030508Fax +372 6030508

E-mail: [email protected]: www.dv-tools.ee

Finland Oy Maanterä AbPL 70 Keinumäenkuja 201510 Vantaa

Phone +358 29006130Fax +358 290061130

E-mail: [email protected]: www.maantera.fi

FranceHAInbuCH France SnCTeCHnIQue de SerrAGe

representative for:Haute Savoie

ZI Lons-Perrigny1600, Route de la Lième39570 Lons-le-Saunier

Ut ilis France Sarl597, Avenue du Mont Blanc74460 Marnaz

Phone +33 384876666Fax +33 384876677

Phone +33 450963630Fax +33 450963793


E-mail: [email protected]: www.ut ilis.com

Great britainHAInbuCH uK Ltd.

6 NewmarketKeys Business Village, Keys Park RoadHednesford, StaffordshireWS12 2HA

Leader Chuck Systems LimitedPO Box 16050Tamworth, B77 9JP

Phone +44 1543 478710Fax +44 1543 478711Mobile +44 7980212784

Phone +44 1827 700000Fax +44 1827 707777

E-mail: [email protected] Internet: www.hainbuch.com

E-mail: [email protected] Internet: www.leaderchuck.com

51www.hainbuch.com

HAINBUCHContact

Greece PAPET Papadopoulos GbRMart instrasse 68DE-73061 Ebersbach/Fils

Phone +49 71635858/530668Fax +49 716352265


Hungary GIMEX Hydraulik GmbHSelyem utca 1.9025 Györ

Phone +36 96525588 Fax +36 96427239

E-mail: [email protected]: www.gimex.hu

GGW Gruber & Co. GmbHKolingasse 61090 Vienna

Phone +43 131075960Fax +43 1310759631

E-mail: [email protected]: www.ggwgruber.at

Ireland Machine Shop & Engineering Supplies Ltd.11 Vale View Lawn - The Park Cabinteely, Dublin 18

Phone +353 12847003Fax +353 12857955


ItalyHAInbuCH Italia srl

Via Cadut i di Nassiriya 522036 Cantu [Co]

Phone +39 0313355351Fax +39 031611570

E-mail: [email protected]: www.hainbuchitalia.it

netherlands BIS Specials [Brandenburg Industry Service Dongen B.V.]Dreef 76996 BA Drempt

Phone +31 313 482566Fax +31 313 482569

E-mail: [email protected]: www.bisspecials.com

norway Onstad Maskin A/SChr. H. Blomsgt. 133717 Skien

Phone +47 35532373/74Fax +47 35532375

E-mail: [email protected]: www.onstadmaskin.no

Poland BIM Sp.z.o.o.ul. Wysogotowska 962081 Przezmierowo

Phone +48 616232041Fax +48 616232040


romania Banatech srl. – connect ing technologiesMuntele Nemanu Nr.1325400 Caransebes, Caras Severin

Phone +40 255517175Fax +40 355814125Mobile +40 749220553

E-mail: [email protected]: www.banatech.ro

russia Rosna Engineering NT LLCpr. Elizarova 38, , Letter »E«192148 St. Petersburg

Phone +7 812 6773731Fax +7 812 6773731

E-mail: [email protected]: www.rosna.spb.ru

Slovakia TNS s.r.o.Vácka ulica 4109/1001841 Dubnica N/V

Phone +421 424450873Fax +421 424440406

E-mail: [email protected]: www.tnssro.eu

Slovenia Elmetool d.o.o.Prvomajska ulica 625000 Nova Gorica

Phone +386 53303300Fax +386 53303304


Spain Portugal

ATM Asistentes Tecnologicos delMecanizado, S. L.Isaac Albeniz, 2908402 Granollers [Barcelona]

Phone +34 938700885Fax +34 938791689


SwedenHAInbuCH Svenska Ab

Kemistvägen 1718379 Täby

Phone +46 87327550Fax +46 87327650


Switzerland Utilis Müllheim AGPräzisionswerkzeugeKreuzlinger Straße 228555 Müllheim

Phone +41 527626262Fax +41 527626200

E-mail: [email protected]: www.ut ilis.com

Turkey HidkomOrganize Sanayi Bölgesi75. Yil CD. Demirciler Sit. B Blok No. 216159 Nilüfer / Bursa

Phone +90 2242438292Fax +90 2242436365

E-mail: [email protected]: www.hidkom.com

northamericaCanadaHAInbuCH America Corp.WOrKHOLdInG TeCHnOLOGY

representative for Ontario and Québec

W129N10980 Washington Dr.Germantown, WI 53022

J. Winkel & Associates Inc.6516 Warbler LaneL5N 6E1 Mississauga, Ontario

Phone +1 4143589550Fax +1 4143589560

Phone +1 9058248335


MexicoHAInbuCH America Corp. WOrKHOLdInG TeCHnOLOGY


Phone +1 4143589550Fax +1 4143589560Se habla español:Phone +1 2143268081


uSAHAInbuCH America Corp. WOrKHOLdInG TeCHnOLOGY


Phone +1 4143589550Fax +1 4143589560


Southamericabrazil Sanposs Tecnologia, Suprimentos e

Consultoria Internacional Ltda.Rua Cândia n° 65 - Jardim do MarCEP: 09726-220São Bernardo do Campo - São Paulo

Phone +55 11 41266711Fax +55 11 41266710

E-mail: [email protected]: www.sanposs.com.br

SouthafricaSouth Africa Retecon [PTY] Ltd.

P.O. Box 14721620 Kempton Park

Phone +27 119768600Fax +27 113942471

E-mail: [email protected]: www.retecon.co.za

HAINBUCH GMBHSPANNENDE TECHNIK

Post fach 1262 · DE-71667 MarbachErdmannhäuser Straße 57 · DE-71672 Marbach

Phone +49 [0] 7144. 907-0Fax +49 [0] 7144. 18826

[email protected]

4.13 part no. 80001/0223 Subject to technical changes.

clamping devices - HAINBUCH · HAINBUCH clamping devices Flexibility is trump system The HAINBUCH...

Documents

Transcript of clamping devices - HAINBUCH · HAINBUCH clamping devices Flexibility is trump system The HAINBUCH...