1

Dr. Nor’ azizi Bin Othman

Department of Mechanical Precision Engineering,

Malaysia-Japan International Institute of Technology,

UTM City Campus Jalan Semarak, 54100 Kuala Lumpur.

Tel: 0139488289

Email : azizi@citycampus.utm.my, azizi@ic.utm.my

PLACE OF BIRTH :

! Gombak, Selangor

DATE OF BIRTH :

! 11 July 1966

ACADEMIC QUALIFICATION :

! Doctor of Engineering, Kyushu university of Japan

. Gasification

. Combustion

. Renewable nergy

. Adsorption

. Automotive

! Master of Engineering, Mechanical Engineering, Malaysia

University of Technology (UTM)

• Project report : A study on the Vibrational Characteristics on

Golf Club

• Supervisor : Prof. Madya Dr. Roslan Bin Abd. Rahman

2

! Bachelor Scienes of Mechanical Engineering, Seoul National

University, Republic of Korea. (SNU)

• Degree Project : Internal Combustion Engine

Supervisor : Prof. Dr. Ro Sung Tak

! Diploma of Mechanical Engineering, Mara University institute

of Technology.(UiTM)

• Diploma Project : Internal Combustion Engine +

Thermodynamic

! Certificate of Korean Language, NCUK / KPP /UiTM Shah

Alam

! Graduate Engineer, Board of Engineers Malaysia Registration

No. 22707A

RESEARCH INTEREST:

! Biomass and biochar gasification

! Biomass and biochar combustion

! Activated carbon

! Transport engineering /Automotive

! Renewal energy

CARRIER HISTORY :

! Lecturer, Malaysia University of Technology, Mechanical

Engineering Department – Present.

! Procurement Engineer – Proton Shah Alam / Proton Casting

Plant.

3

! Maintenance Engineer – Transnasional Sdn. Bhd

! Workshop Manager – MBF/ Daewoo Commercial Vehicles

TEACHING EXPERIENCE :

! Undergraduate Courses

Diploma and degree level

No. Course Code Course Name

1. DDJ 2203 UTM Dynamics(physic)

2. DDJ 3413 UTM Thermodynamic II(physic)

3. DDJ 2922 UTM Matematik I

4. DDJ 3932 UTM Matematik II

5 DDJ 2403 UTM Thermodynamics I(physics)

6 DDJ 1203 UTM Statics (physics)

7. KJM 331b (UiTM) 2003 / 2004 Thermodynamics I(physic)

8. KJM 331 (UiTM) 2003 / 2004 Thermodynamics II(physic)

9. DDJ 2203 KTU 2001/2002 Dynamics(physic)

10. DDJ 2203 KTU 2003/ 2004 dynamic (physic)

Degree level

1. Universiti Pertahanan Malaysia Dynamics

2. Universiti Pertahanan Malaysia Sistem Elektrik Kenderaan

3. Universiti Pertahanan Malaysia Teknologi Automotif

4. Universiti Pertahanan Malaysia Dinamik Kenderaan

5. Universiti Pertahanan Malaysia Sistem Kej. Automotive

6. Universiti Pertahanan Malaysia Struktur Auto. Kenderaan

7. Universiti Pertahanan Malaysia Internal Combustion Engine

ADMINISTRATION :

4

4 Januari 2007 Perlantikan Sebagai Pensyarah Program

Separuh masa Semester 1I sesi 2006 / 2007

bagi Matapelajaran dinamik

10 Januari 2007 Perlantikan Sebagai Ketua Woksyop Automotif

Jabatan Kejuruteraan Mekanikal Utmkl

18 Januari 2007 Bengkel Pengajaran Diploma Kejuruteraan

Mekanikal Semester II Sesi 2006 / 2007

22 Januari 2007 Lantikan Sebagai Penyelia makmal

Kejuruteraan Mekanikal Bagi Program Luar

Kampus SPACE Utm semester II Sesi

2006/2007 bagi Mata pelajaran Termodinamik

9 Februari 2007 Lantikan Sebagai Pensyarah Makmal

Kejuruteraan Mekanikal DDJ 2922 untuk

Pegawai Kadet Kolej Tentera Udara Alor Setar.

29 Mac 2007 Penyelaras Dan Moderator Bagi Moderation

Peperiksaan Akhir Bersama Kolej Kerjasama

Semester 2 Sesi 2006/2007

Penyelaras :

• DDJ 2203 – Dinamik

• DDJ 3213 – Mekanik Mesin

• DDJ 3603 – Sains Bahan

Kolej IKIP dan IUCTT

Automotif Moderator :

• DMV 1234 – Teknologi Injin 1

• DMV 2333 – Teknologi Injin 2

• DMV 2434 - Teknologi Injin 3

• DMV 3563 – Sistem Diagnosis Automotif

• DMV 3583 – Sistem Penyaman Udara

5

Automotif

Kolej IJED

26 Mac 2007 Penyelaras Dan Moderator Bagi Moderation

Peperiksaan Akhir Bersama Kolej Kerjasama

Semester 2 Sesi 2006/2007

Automotif Moderator :

• DMV 1234 – Teknologi Injin 1

• DMV 2333 – Teknologi Injin 2

• DMV 2434 - Teknologi Injin 3

• DMV 3563 – Sistem Diagnosis Automotif

• DMV 3583 – Sistem Penyaman Udara

Automotif

Kolej IJED

6 April 2007 Lantikan Panel Lawatan Kualiti Program

Kerjasama Semester II sesi 2006 / 2007 ke Kolej

Negri.

12 April 2007 Pengawas Peperiksaan Akhir Semester II akhir

Semester Program Luar Kampus Space

Semester II Sesi 2006/2007

20 April 2007 Penilai, Penilaian Akhir 20% Semester II Sesi

2006/2007 (Rekabentuk automotif), Kolej Negeri

28 November 2006 Ketua Pengawas Peperiksaan Akhir Program

Kerjasama Semester I Sesi 2006/2007 Bagi

Kolej KYM dan Lagenda

22 Disember 2006 Perlantikan Sebagai Pensyarah Program

Separuh masa Semester 1I sesi 2005 / 2006

bagi Matapelajaran dinamik

29 November 2006 Pemeriksa Skrip Jawapan Peperiksaan Akhir

Program Kerjasama Semester I Sesi 2006/2007

(DDJ 2203 – Dinamik), Kolej IKIP dan IUCTT.

6

23 November 2006 Ketua Pengawas Peperiksaan Akhir Program

Kerjasama Semester I Sesi 2005/2006 Bagi

Kolej IUCTT dan Lagenda

2 November 2006 Pengawas Peperiksaan Akhir Semester I akhir

Semester Program Luar Kampus Space

Semester I Sesi 2006/2007

30 Oktober 2006 Lantikan Sebagai Penyelia Makmal

Kejuruteraan Mekanikal Bagi Program

kerjasama semester I Sesi 2006/2007 Bagi Kolej

IKIP Kuantan Pahang.

20 Oktober 2006 Lantikan Sebagai Pengawas / Ketua Pegawas

Pepereksaan ATMA/ UTM Semester 1 Sesi 2005

/ 2006

1 September 2006 Bengkel Pembinaan Kurikulum, Kolej Sains Dan

Teknologi, UTM City Campus, Kuala Lumpur

13 Julai 2006 Lantikan sebagai Panel Lawatan Validasi

Makmal Semester II Sesi 2005 / 2006 Bagi

Subjek DTV 1934 DTV 2944 Di Kolej Ijed

Seremban Negeri Sembilan

3 Julai 2006 Perlantikan Sebagai Pensyarah Program

Separuh masa Semester 1 sesi 2006 / 2007 bagi

Matapelajaran Termodinamik 1

30 Jun 2006 Penggubal Soalan PTK Tahun 2006 Bahagian

Kompetensi Khusus / Latihan Vokasional

23 Jun 2006 Bengkel Pengajaran Diploma Teknologi

Semester I Sesi 2006/ 2007

23 Mei 2006 Dilantik Sebagai Pensyarah Bahasa Korea

untuk mengajar kakitangan UTM secara

Percuma

26 April 2006 Ketua Pegawas / Pengawas pepereksaan Akhir

7

Program Kerjasama Semester II sesi 2005 /

2006

18 November 2005 Perlantikan Sebagai Penyelia Makmal dan

Woksyop Mekanikal Program Kerjasama

Semester I 2006 / 2007

16 November 2005 Penilai Kepada Penilaian Akir 20% Diploma

Teknologi Mekanikal Semester I- Sesi 2005 /

2006 Bagi kolej IKM Jasin Dan Ijed Seremban

16 November 2005 Perlantikan Sebagai Penyelia amali

Kejuruteraan Mekanikal Program Kerjasama

Semester I 2006 / 2007 Bagi Kolej IUCTT

16 November 2005 Moderation Soalan Pepereksaan Akhir Programn

Kerjasama Diploma Kejuruteraan dan Diploma

Teknologi Semester I –Sesi 2005 / 2006

18 April 2005 Dilantik Sebagai Pembuat Kertas Soalan

Pepereksaan Perkhidmatan Staff Bil. 1 1/2005-

Kertas II (Jabatan –Teori) & Kertas II -Amali

1 April 2005 Lantikan Sebagai Pemereksa skrip Jawapan

Pepereksaan akhir Semester II Sesi 2004 / 2005

10 Mac 2005 Moderation Soalan Pepereksaan Akhir Program

Kerjasama Diploma Kejuruteraan dan Diploma

Teknologi Semester II –Sesi 2004 / 2005

25 Februari 2005 Bengkel Pepereksaan Akhir Diploma Teknologi

Mekanikal Program Kerjasama Semester II Sesi

2004 / 2005 untuk Kolej Negeri dan IKM Jasin

24 Februari 2005 Bengkel Penilaian Pengajaran Program

Kerjasama Semester II Sesi 2004 / 2005 bagi

Matapelajaran Dinamik DDJ 2203 Bagi Kolej

IKIP Dan LGTT

7 Januari 2005 Bengkel Perancangan kuliah Penyataan Hasdil

8

Pembelajaran bagi Diploma Teknologi Automotif

(DTV) dan Diploma Teknologi Persenjataan

Ketenteraan (DTW) di Kolej IJED Port Dickson

Negeri Sembilan

29 November 2004 Bengkel Penilaian Pengajaran Program

Kerjasama Semester II Sesi 2004 / 2005 bagi

Matapelajaran Teknologi Injin 2 DTV 2813 dan

Teknologi Elektrik Dan Elektronik DTV 2512

Bagi Kolej IJED

24 Oktober 2004 Penyemak dan Pengesah Keputusan

Pepereksaan Akhir Program Space program

Pengajian Separuh Masa Semester I, Sesi 2004

/ 2005

24 Oktober 2004 Lantikan Sebagai Pemereksa skrip Jawapan

Pepereksaan akhir Semester I Sesi 2004 / 2005

bagi Kolej IKIP dan LGTT

7 Oktober 2004 Penilai Kepada Penilaian Akir 20% Diploma

Teknologi Mekanikal Semester I- Sesi 2004 /

2005 Bagi kolej IKM Jasin Dan Kolej Negeri

Seremban Negeri Sembilan

16 September 2004 Bengkel Penilaian Pengajaran Program

Kerjasama Semester I Sesi 2004 / 2005 bagi

Matapelajaran Mekanik Mesin Dan Dinamik

bagi Kolej IKIP dan LGTT

28 Julai 2004 Lantikan Sebagai Pelawat lawatan kualiti Di

IKTBN Sepang pada 11 Ogos 2004

5 Julai 2004 Perlantikan Sebagai Penasihat Akademik Pelajar

2 Julai 2004 Perlantikan Sebagai Ketua Woksyop Mekanikal

23 Jun 2004 Perlantikan Sebagai Pengawas Dan Pemeriksa

Kertas Peperiksaan Perkhidmatan Sokongan

9

Yang Setaraf Dengan Kumpulan C Kertas III

( Ujian Amali)

26 Mei 2004 Bengkel Pembentukan Kurikulum Diploma

Teknologi Mekanikal (DMR, DMV, DMP) UTM

pada 10 Jun 2004

7 April 2003 Lantikan Sebagai Penyelaras Matapelajaran

Diploma Teknologi Mekanikal Automotif

6 Januari 2003 Perlantikan Sebagai Ketua makmal Mekanik

Mesin

Research Interests

• Biomass and biochar gasification • Biomass and biochar combustion • Activated carbon • Transport engineering • Renewal energy

Grants • Development of Decision Support System to Manage Electronic Waste in Sustainable and Integrated Manner (2011)-Team Member.

• Development of Smart Thin Client Computing System as an Innovative Technology for the Reuse of Obsolete Computer in Sustainable Manner (2011)-RM 40,000- Team Member.

• Improvement energy consumption dealing with on/ off cooling schedule in dwellings.Q.K130000.2643.05J35. Research university grant- Team member.

Previous Positions

• Engineer , 1994-1996, Mara holding Sdn Bhd • Engineer, Mbf Commercial Vehicle Daewoo and MAN, 1996-1997 • Tutor, UTM, 1998-2001, • Lecturer, UTM, 2001-2010 • Senior Lecturer, Lecturer, 2010- • Head of Automotive for Technology courses (College Ijed and IKIP • Head of Workshop (Mechanical Department)

Profesional membership

• Graduate member (Board of Engineers Malaysia), ref no. 2207A.

10

Awards • Excellence head of mechanic machine laboratory– 2 July 2004 Ref. file: UTM.32/12.20/6 Jilid 2 (75).

• Teaching assistant in Kyushu University (June 2010 – April 2013) • SLAI (Ministry of Higher Education, Malaysia) scholarship award

(2009-2013) • UTM Excellence Worker Service Award (2008) • Excellence teaching in SPACE program, 26 Jun 2008, ref. file:

UTM(S)01.08/10.14/22(20).

Selected Publications

and conferences

• Norazli Othman, Noor Ezlin Ahmad Basri, Muhd Noor Muhd Yunus, Mohd Sidek and Nor’azizi Othman (2009), ‘Study on the Potential of Electronic Plastic Waste as a Source of Energy and Raw Materials’ Science Journal Malaysiana. (Article in SCIENCE Malaysiana diabstrak in Thomson ISI (Web of Science), Scopus (Elsevier Science), Chemical Abstracts (American Chemical Society and Zentrablatt MATH (European Mathematical Society), pp 707-715.

• Norazli O. Noor Ezlin A.B., M.Y. Muhd Noor and Nor ‘azizi Othman. (2011), An Aproach Towards the Integrated Electronic Waste (E-waste) Management Technique in Malaysia, Proceeding of the International Conference on Solid Waste 2011-Moving Towards Sustainable Resource Management, Hong Kong SAR, P.R. China, 2-6 May 2011.

• Norazli Othman, Noor Ezlin Ahmad Basri, Muhd Noor Muhd Yunus, Lariyah Mohd Sidek and Nor’ azizi Othman (2010), Issues of Electronic Waste Generated, Discarded and Management Option in Malaysia, The 2nd International Conference on Engineering and ICT “ Powering Technology Through Sustainable Development”, Melaka, Malaysia 18-20 February 2010.

• Norazli Othman, Noor Ezlin Ahmad Basri, Muhd Noor Muhd Yunus, Lariyah Mohd Sidek dan Nor’ azizi Othman (2009), ‘Electronic Plastic Waste Management in Malaysia, The potential of waste to energy conversion’ Proceedings of the 3rd International Conference on Energy and Environment abstract in SCOPUS, Melaka, 7-8 December 2009.

• Norazli Othman, Noor Ezlin Ahmad Basri, Muhd Noor Muhd Yunus, Lariyah Mohd Sidek dan Nor ’azizi Othman (2009), ‘Determination of total chlorine and total bromine content in the electronic plastic waste resin sample using neutron activation analysis method ’ Proceedings of the environmental science and technology conference, Permai Park Inn Hotel, Kuala Terengganu, 7-8 December 2009.

• Norazli Othman, Noor Ezlin Ahmad Basri, Muhd Noor Muhd Yunus, Lariyah Mohd Sidek and Nor‘ azizi Othman (2010), Determination of Heavy metals concentration in electronic plastic waste resin, Reginal Seminar Science, Technology and Social Science 2010, Kuantan Malaysia 1-2 June 2010.

11

• Norazli Othman, Noor Ezlin Ahmad Basri, Muhd Noor Muhd Yunus, Lariyah Mohd Sidek dan Nor’ azizi Othman (2009), ‘Pengurusan Bersepadu Sisa Pepejal: Inovasi ke Arah Kecekapan, Produktiviti dan Kejayaan ’Prosiding Seminar Nasional Inovasi Dalam Pengurusan : Ke Arah Kecekapan, Produktiviti dan Kejayaan, MITC Air Keroh Melaka, 4-5 Mac 2009.

• Investigation of the catalytic effect of MnO2 in the combination with activated carbon fibre on the removal of NO. Nor Azizi, Young-Kwang Kim, Jin Miyawaki, Isao Mochida, Seong-Ho Yoon.Carbonconference2010.http://www.acs.omnibooksonline.com/data/papers/2010_528.pdf

• Nor Azizi, Young-Kwang Kim, Jin Miyawaki, Isao Mochida, Seong-Ho Yoon. Low temperature catalytic steam gasification of waste palm trunk by potassium carbonate supported on perovskite oxide. Advanced Materials Research, 626, 551-558 (available online December 27, 2012) Nor Azizi, Young-Kwang Kim, Jin Miyawaki, Isao Mochida, Seong-Ho Yoon.

• Nor Azizi, Syed Ahmed Ali, Khalid Alhooshani, Taegon Kim, Youngjin Lee, Joo-II Park, Jin Miyawaki, Seong-Ho Yoon, Isao Mochida. Hydrotreating of light cycle oil over NiMo and CoMo catalysts with different supports.Fuels Processing Technology, (available online November 26).Volume 109, May 2013, Pages 172-178. http://www.sciencedirect.com/

• Nor’Azizi Bin Othman, Taegon Kim, Akinobu Immamura, Jin Miyawaki, Isao Mochida, Seong-Ho Yoon. Investigation on H2S removal factors of activated carbons derived from waste palm trunk. Journal Novel Carbon Resources Sciences. JNCRS vol7, pp 7-11, 2013. http://ncrs.cm.kyushu-u.ac.jp/ncrs2/380.html#vol7.

• Low Temperature Catalytic Steam Gasification of Lignite by Potassium Carbonate Supported on Perovskite Oxide Catalyst Young-Kwang Kim, LiFang Hao, Nor’Azizi Bin Othman, Jin Miyawaki, Isao Mochida, Seong-Ho Yoon 8th Japan-China-Korea Joint symposium -Carbon Materials for Energy Devices&Environmental Protection- Carbon Saves the Earth 2010, Japan, 2010. http://carbon.cm.kyushu-u.ac.jp/conference/index-en.htm.

• Mild hydrocracking of 1-methyl naphthalene (1-MN) over alumina modified zeolite. Joo-Il Park, Syed Ahmed Ali, Khalid Alhooshani, Nor Azizi, Jin Miyawaki, Taegon Kim, Youngjin Lee, Hyun-Seok Kim, Seong-Ho Yoon, Isao Mochida. Journal of Industrial and Engineering Chemistry, Volume 19, Issue 2, 25 March 2013, Pages 627-632.

• Nor Azizi, Young-Kwang Kim, Jin Miyawaki, Isao Mochida, Seong-Ho Yoon. Catalytic steam gasification of waste palm trunk derived bio-char. Applied Mechanics and Materials. Applied Mechanics and Materials Vol. 315 (2013) pp 252-259.Online available since

12

2013/Apr/10 at www.scientific.net

Book • Lukisan Kejuruteraan dan Berbantu Komputer.Publisher: Pearson Education, Year : 2008

PROFESSIONAL COURSES COMPLETED :

! “Bengkel Pembangunan Website Pensyarah Jabatan

Kejuruteraan Mekanikal”, Makmal Mikro AB100, UTM City

Campus, Kuala Lumpur (27 April 2007).

! “Kursus Penilaian Tahap Kecekapan Bagi Skim Pendidikan

– DS45/TK3”, Bilik Seminar 3 & 4, Canseleri, UTM City

Campus, Kuala Lumpur (20 – 28 June 2005).

! “Kursus Pemasangan Elektrik”, Department of Electrical

Engineering, UTM City Campus, Kuala Lumpur (05 – 10 April

2004).

! Adult Learning For SPACE Programme Lecturer, Auditorium

International Business School, UTM Kuala Lumpur (5 Julai

2005).

! Induksi Course, Blok N24, Dewan Kuliah 8, Kompleks Dewan

Kuliah Pusat, UTM Skudai, Johor ( 30 September 2002 – 12

October 2002 & 14 – 18 October 2002).

13

! Learning and Teaching Basic Course, Dewan Jumaah, UTM

Kuala Lumpur (25 – 28 June 2001).

! Kursusu HTML anjuran Pusat computer, Utmkl (12 Nov hingga

13 Nov 2002)

! Kursus Bina Negara anjuran BIRO TATANEGARA di Kem Bina

Negara Alor Gajah, Melaka (24 Jun 1995 hingga 28 Jun 1995)

! Practical Mangerial Skills Workshop anjuran JT Frank

Startegic Group (21 Ogos 1995 hingga 22 Ogos 1995)

AWARDS :

! Top Student Award – 1990, Uitm Shah Alam

! Dean’s honor certificate – Semester 05 in 1989/1998 session.

! Menerima Ucapan Pengharapan Dan Terimakasih Daripada

Professor Ir. Dr. Hamisah Binti Tapsir di atas kecemerlangan

sebagai ketua makmal mekanik mesin – Pada 2 Julai 2004 Ruj.

Fail UTM.32/12.20/6 Jilid 2 (75)

! MENERIMA ANUGERAH CEMERLANG 2008

REFERENCES :

! Mr. Ayob Hashim,

Head Of Mechanical Department,

College Of Science And Technology,

Universiti Teknologi Malaysia, Kuala Lumpur.

14

(03-26154233)

! Dr. Aminuddin Abu.

Department of Mechanical Precision Engineering,

Malaysia-Japan International Institute of Technology,

UTM City Campus Jalan Semarak, 54100 Kuala Lumpur.

(013-3199871)