City Buses

For your safety and comfortCITY BUSESThe manufacturer reserves the right to modify the models, technical specifications, equipment, and accessories without

prior notice. There can be changes after the printing of this document (October 2009). No rights can be claimed over the marks and numbers used by the dealer and manufacturer to identify the order or the ordered good. The figures and photos may include optional, non-standard accessories and special equipment. Color differences are due to printing techniques.

October 2009 - 1000www.bmc.com.tr

GENERAL MANAGEMENT & FACTORYKemalpaa Caddesi No: 32

35060 Izmir - TURKEYPhone: +90 232 477 18 00 Fax: +90 232 477 18 77-78-79

EXPORT SALESKemalpaa Caddesi No: 32

35060 Izmir - TURKEYPhone: +90 232 477 18 00 Fax: +90 232 477 18 33

E-Mail: [email protected]

UK OFFICEHavenfields, Aylesbury Road,

Great Missenden Bucks HP 16 9 LS ENGLANDPhone: +44 1494 - 89 08 88 Fax: +44 1494 - 89 08 84


www.bmc.com.tr

The strategically important location and extensive experience in the automotive industry make Turkey an ideal choice for global automotive manufacturers seeking a production base. 1.250.000 vehicles are manufactured in Turkey annually, out of which about 80% are exported.

With its wide range of products including light, medium, heavy commercials, special-purpose and military vehicles, buses and coaches, spare parts and engines, BMC is one of the largest commercial vehicle manufacturers in Turkey. A total of 22.000 vehicles are manufactured annually at the companys two vertically integrated production facilities based in Izmir, Turkey with its 3.500 skilled and dedicated workforce.

For many years BMC has been providing the passenger transport sector with cost effective, reliable, and comfortable buses and coaches produced at its state-of-the-art bus factory. With a focus on flexibility to meet individual needs, The BMC range encompasses complete buses, coaches and bus chassis used by a variety of passenger transport operators.

TURKEY & BMC: Production Headquarters

As a growing global player in passenger transport sector, BMC fulfils the requirements of city bus transport with models tailored to the specific needs of passengers and operators. The distinctive outlook and elegant interior designs of BMC City Buses along with concepts of sustainable development and innovation combine in order to make the journeys safer, more comfortable and enjoyable for passengers. BMC City Buses further simplify the routine tasks of the drivers and keep them focused on their main task: driving passengers to their destinations safely.

BMC City Buses derive their outstanding performance from Euro 5 / EEV Cummins diesel or CNG engines. BMC City Bus range including PROBUS 215 SCB, HAWK, PROCITY and PROCITY CNG have all optimised costs of initial investment, operation and maintenance so as to be the reliable partner of city bus operators.

BMC CITY BUSES

Offering a wide range of midibuses, inter-urban buses, coaches, city buses and school buses, BMC stands out to be a leading manufacturer fulfilling the expectations of the passenger transport sector by utilising flexible manufacturing systems.

We are well aware that every market and operator has specific sets of requirements; we can transform your vision into reality by tailoring products to meet your needs while offering maximised profitability. With their stylish outlook and generous interior design as well as technologically advanced features and innovativeness BMC buses offer maximum comfort, easy ride and outstanding safety for passengers.

Committed to continuous improvement on quality and environmentally-friendliness, BMC has been carrying out its research and development activities to exceed globally accepted quality standards including ISO 9001 and European conformity of production certificates. All BMC bus and coach products meet the European Type approval requirements, such as ECE regulations and EC directives. BMC buses are equipped with the latest Euro 5 engines further fulfilling EEV (Enhanced Environmentally friendly Vehicle) standards, demonstrating the companys commitment for a cleaner environment.

BMC BUS RANGE

Compact & Stylish: PROBUS 215 SCB

PROBUS 215 SCBCITY BUSES

Compact and stylish PROBUS 215 SCB stands out as a versatile city bus designed for narrow country lanes and old towns where manoeuvrability is essential. PROBUS 215 SCB, a 9-metre bus with its striking appearance and many benefits, represents a perfect alternative for many European cities.

DIMENSIONS (mm)A : Wheelbase 4455B : Overall length 9105C : Overall width 2390D : Overall height Without A/C: 2980

With A/C: 3050E : Inner height Front: 2160

Rear: 1960F : Front overhang 1980G : Rear overhang 2670H : Front track 2000J : Rear track 1811K : First step height Front: 340

Middle: 220

L : Inner width 2260WEIGHTS (kg)Kerb weight 8490Kerb weight,front axle 2620Kerb weight,rear axle 5780Max.permissible total weight Front: 5000

Rear: 8900Gross vehicle weight 13400PASSENGER CAPACITY 26 seating +

39 standing + 1 driver

PERFORMANCEGradeability (at GVW) (%) 40Max. speed at level road (kph) 110Turning radius (mm) 8975

8 9

With its modern and contemporary look PROBUS 215 SCB offers excellent accessibility providing easy entry and exits. PROBUS 215 SCB is equipped with 26 durable and hard-wearing seats in the standard layout, which can be tailored to city or inter-urban usage. The bus also features numerous handrails and grips for the safety of standing passengers.

2,3 metre-wide passenger compartment offers a spacious interior while the generous headroom contributes to comfort when the passengers are not seated.

Cost efficient PROBUS 215 SCB arises as an ideal bus for multi-purpose operators.

Easyaccessibility Cumminscommon-raildieselenginewith285PSinEuro5 Sixspeedautomaticgearbox 26comfortableseatsinstandardlayout Wheelchairarea Optionaloverheadluggagerack

HIGHLIGHTS

Optionalelectricaldisabledlift Optionaldigitaldestinationboard

TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS

11

ENGINE

MAKE/MODEL CUMMINS ISBe5 285B EURO-5

TYPE Turbocharged intercooler, diesel

NUMBER OF CYLINDERS 6

TOTAL DISPLACEMENT 6.7 lt.

MAXIMUM POWER 285 PS (210 KW) @ 2300 rpm

MAXIMUM TORQUE 1020 NM @ 1200-1800 rpm

FUEL INJECTION

MAKE / MODEL BOSCH / HPCR

FUEL TANK CAPACITY 160 lt

GEAR BOX

MAKE / MODEL ZF 6HP 504C Automatic

NUMBER OF GEARS 6 forward, 1 reverse automatic

FRONT AXLE

TYPE, CAPACITY I section, forged steel, 5000 kg

REAR AXLE

MAKE / TYPE DANA 9.24

NUMBER OF SPEEDS Single Speed

AXLE RATIO 4.88 : 1

CAPACITY 9500 kg

STEERING SYSTEM

STEERING BOX MAKE / MODEL

HEMA (ZF) 8043

TYPE Servocom type,Hydraulic

BRAKE SYSTEM

TYPE Full air service brake, front and rear disc brakes, air actuated hand brake, ABS / ASR

RETARDER Intarder

SUSPENSION

FRONT AXLE Air spring (2), shock absorbers (2)

REAR AXLE Air spring (4), shock absorbers (4)

ANTI-ROLL BAR Front and rear

CHASSIS

PROFILE TYPE C section steel profile

TYRES 265 / 70R 19,5 - tubeless / 6+1

RIMS 7.50 x 19.5

ELECTRICAL SYSTEM

VOLTAGE 24 V , negative (-) ground

BATTERIES 2 x 12 V , 150 Ah

ALTERNATOR 24 V , 140 A

STARTER MOTOR 24 V , 3.5 kW

STANDARD ACCESSORIESManual destination board (Front, Rear, Side)Radio / CD Player, Speaker

10

OPTIONSAir ConditionIndependent heaterDigital destination board (Front, Rear, Side)Electrical disabled lift

Ergonomic drivers cabin

Optional overhead luggage racks Optional luggage racks

Spacious interior to meet all your requirements

Optional electrical lift for the easy access of disabled passengers

Slide & fold front and centre doors

Viable & Versatile: HAWK

HAWKCITY BUSES

Viable and versatile HAWK has been the ideal city bus for short and medium distance transport. 9,8 metre HAWK presents operators a cost-effective solution with its economical maintenance and operating costs. The elegant exterior styling along with well laid and generous interior design welcomes passengers to a safe and comfortable journey to their destinations.


With A/C: 3080E : Inner height Front: 2410

Rear: 1915F : Front overhang 2625G : Rear overhang 2825H : Front track 2000J : Rear track 1811K : First step height 340

L : Inner width 2352WEIGHTS (kg)Kerb weight 8640Kerb weight,front axle 2640Kerb weight,rear axle 6000Max.permissible total weight Front: 5000

Rear: 8500

Gross vehicle weight 13500PASSENGER CAPACITY 33 seating

(30+3 tip-up) + 37 standing + 1 driver


16 17

The striking exterior design along with the easy accessibility for all passengers thanks to its stepless low floor design and foldable ramp in centre door for disabled passengers and prams, HAWK enables you to create the passenger compartment you need. With 3 tip-up seats, 33 ergonomically-designed seats are provided in the standard layout in addition to the flexible grab-rail systems

for standing passengers. 2,5 metre-width as well as generous headroom and large side windows conveys a bright and airy feel in the passenger compartment.

Minimum whole life cycle cost and superior comfort and safety make HAWK the perfect vehicle to meet various needs of local transport systems.

Steplesslowfloordesign Manualfoldablerampincentredoor Easyaccessibility CumminsEuro5common-raildieselengine(285PS) Sixspeedautomaticgearbox 33comfortableseatsincluding3tip-upseats

HIGHLIGHTS

Wheelchairareapositionedoppositethecentredoor Multiplexsystem Optionalclimatecontrolsystem Optionaldigitaldestinationboard

Tip-up seats and wheelchair area positioned opposite the centre door

TECHNICAL SPECIFICATIONS

Powerful and environmentally-friendly: 6 cylinder, 285 PS Cummins Euro 5/EEV rear engine incorporating the latest SCR technology

ENGINE






MAXIMUM TORQUE 1020 NM @ 1200-1800 rpm

FUEL INJECTION



GEAR BOX


NUMBER OF GEARS 6 forward, 1 reverse

FRONT AXLE

TYPE, CAPACITY I section, forged steel, 5000 kg

REAR AXLE

MAKE / TYPE DANA 9.24


AXLE RATIO 4.88 : 1

CAPACITY 9500 kg

STEERING SYSTEM


HEMA (ZF) 8098

TYPE Servocom type, Hydraulic

BRAKE SYSTEM


RETARDER Intarder

SUSPENSION



ANTI-ROLL BAR Front and rear

CHASSIS

PROFILE TYPE Monocoque body

TYRES 265 / 70R 19,5 - tubeless / 6+1

RIMS 7.50 x 19.5

ELECTRICAL SYSTEM


BATTERIES 2 x 12 V , 150 A


STARTER MOTOR 24 V , 3.5 kW


19

STANDARD ACCESSORIESManual destination board (Front, Rear, Side)Radio / CD Player, SpeakerManual foldable ramp

18

OPTIONSAir ConditionIndependent heaterDigital destination board (Front, Rear, Side)

Slide & fold front and centre doors

Easy accessibility to all with foldable ramp in centre door

Bright and roomy interior

Easy-reach controls in drivers cabin

Durable and hard-wearing seats

Robust & Reliable: PROCITY

PROCITYCITY BUSES

Robust and reliable PROCITY provides a safer and more comfortable journey for passengers while offering minimised operation and maintenance costs to city transport operators. 12-metre long, PROCITY copes with the passenger flow in the rush hours thanks to its large passenger capacity. Flexibility, outstanding performance and operating efficiency of PROCITY prove it to be the perfect match for specific requirements in the sector.


With A/C: 3050E : Inner height 2370F : Front overhang 2815G : Rear overhang 3215H : Front track 2096J : Rear track 1832K : First step height 340L : Inner width 2410WEIGHTS (kg)Kerb weight 10850Kerb weight,front axle 3560Kerb weight,rear axle 7290Max.permissible total weight Front: 7100

Rear: 11500

Gross vehicle weight 18000PASSENGER CAPACITY 30 seating + 66

standing + 1 driver


24 25

Excellent accessibility with kneeling function and foldable ramp Wheelchair area positioned opposite the centre door

The elegant design creates PROCITYs distinctive outlook. Along its 12 metre length PROCITY provides quality in all aspects. The interior design of PROCITY further contributes to the feeling of comfort and functionality with a bright and roomy passenger compartment. PROCITY is designed with a focus on excellent accessibility and thus has a stepless super low-floor design throughout. The kneeling function along with its manual foldable ramp makes the bus accessible to all and enables swift

passenger flow. Besides the foldable ramp, there is a wheelchair area opposite centre door complying with EU directive 2001/85.

Ergonomically and comfortably designed seats, which are made of easy-clean and hard-wearing material, can be tailored to meet your specific need.

The low life cycle costs of PROCITY along with its robust and reliable character make it an ideal solution for your fleet in city transport operations.

Stepless,walk-throughsuperlowfloordesign Kneelingfunction Manualfoldablerampfittedincentredoorforwheelchairs. and prams Excellentaccessibility Cumminscommon-raildieselenginewith285PSor320 PS in Euro 5 and EEV

HIGHLIGHTS

Sixspeedautomaticgearboxoption Standardseatingfor30durableseats Wheelchairareapositionedoppositethecentredoor Optionalelectricaldisabledramp Optionalclimatecontrolsystem Digitaldestinationboardoption Multiplexsystemoption


Kneeling function and walk through super low floor for easy passenger entry and exits

ENGINE


CUMMINS ISLe5 320B EURO-5


Turbocharged intercooler, diesel

NUMBER OF CYLINDERS 6 6

TOTAL DISPLACEMENT 6.7 lt. 8.9 lt.

MAXIMUM POWER 285 PS (210 KW) @ 2300 rpm 320 PS (235 KW) @ 2100 rpm

MAXIMUM TORQUE 1020 NM @ 1200-1800 rpm 1300 NM @ 1100-1600 rpm

FUEL INJECTION



GEAR BOX

MAKE / MODEL ZF 6HP 504C Automatic ZF 6HP 604C Automatic

NUMBER OF GEARS 6 forward, 1 reverse automatic 6 forward, 1 reverse automatic

FRONT AXLE

TYPE, CAPACITY ZF RL 85A, 8500 kg

REAR AXLE

MAKE / TYPE ZF AV132


AXLE RATIO 6.21 : 1

CAPACITY 13000 kg

STEERING SYSTEM


HEMA (ZF) 8098

TYPE Servocom type,Hydraulic

BRAKE SYSTEM


RETARDER Intarder

SUSPENSION



ANTI-ROLL BAR / KNEELING No anti rool bar / Right side kneeling

CHASSIS


TYRES 275 / 70R 22,5 - tubeless / 6+1

RIMS 8.25 x 22.5

ELECTRICAL SYSTEM




STARTER MOTOR 24 V



2726

OPTIONSAir ConditionIndependent heaterElectrical disabled rampDigital destination board (Front, Rear, Side)

285 or 320 PS Cummins common-rail engine, fitted at the rear left-hand side for a more spacious interior

Ergonomic drivers cabin for fully-focused drivers

A well-laid interior design

Hard-wearing seats, easy-to-clean floor

Powerful yet environmentally-friendly: PROCITY CNG

PROCITY CNGCITY BUSES

The use of compressed natural gas (CNG) as an alternative fuel in transportation solutions enhances the buses as well as promoting environmental protection. Powerful yet environmentally-friendly PROCITY CNG provides maximised profitability and minimised operating costs while ensuring its respect for environment with lower pollutant and particulate emission levels.

Equipped with the highest level of safety systems in compliance with ECE 110 and EEV (Enhanced Environmentally friendly Vehicle) standards directives, 12-metre long PROCITY CNG is fitted with 320 PS Cummins Engine. PROCITY CNG provides many solutions to passengers with its easy getting on and off features, such as super low-floor design, stepless entries, manual foldable ramp for disabled passengers and kneeling system.

PROCITY CNG is an attractive alternative to city bus operators with its low operation costs and easy-maintenance.

DIMENSIONS (mm)A : Wheelbase 5850B : Overall length 11880C : Overall width 2535D : Overall height 3330

E : Inner height 2370F : Front overhang 2815G : Rear overhang 3215H : Front track 2096J : Rear track 1832K : First step height 340L : Inner width 2410WEIGHTS (kg)Kerb weight 11800Kerb weight,front axle 7710Kerb weight,rear axle 4090Max.permissible total weight Front: 7100

Rear: 11500

Gross vehicle weight 18000PASSENGER CAPACITY 30 seating + 60

standing + 1 driver


32

Excellent accessibility with kneeling function and foldable ramp

Robust and hard-wearing seats, easy-to-clean floor

12-meter long PROCITY CNG offers maximum drive comfort and safety for all passengers with a cleverly designed roomy interior and flexible seating layout. Easy accessibility is achieved through super low-floor entries and exits on all doors, stepless passenger compartment and kneeling function for faster passenger boarding.

With its 30 seats, spacious interior and generous headroom, PROCITY CNG welcomes passengers to an enjoyable ride. The use of gas as the fuel, PROCITY CNG provides lower operation and maintenance costs for your transport needs along with environmental protection.

Stepless,walk-throughsuperlowfloordesign Kneelingfunction Manualfoldablerampincentredoorforwheelchairsand prams Wheelchairareapositionedoppositethecentredoor Cumminscommon-raildieselenginewith320PSmeeting EEV standards

HIGHLIGHTS

Sixspeedautomaticgearboxoption 30comfortableseatsasstandardseating Optionalelectricaldisabledramp Optionalclimatecontrolsystem Digitaldestinationboardoption Optionalmultiplexsystem

33


ENGINE

MAKE/MODEL CUMMINS ISLGe EV 320

TYPE Turbocharged & CAC




MAXIMUM TORQUE 1355 NM @ 1300 rpm

FUEL INJECTION


FUEL TANK CAPACITY 1176 lt / 213 kg.

GEAR BOX


NUMBER OF GEARS 6 forward, 1 reverse automatic

FRONT AXLE

TYPE, CAPACITY ZF RL 85A, 8500 kg

REAR AXLE

MAKE / TYPE ZF AV132


AXLE RATIO 6.21 : 1

CAPACITY 13000 kg

STEERING SYSTEM


HEMA (ZF) 8098

TYPE Servocom type, Hydraulic

BRAKE SYSTEM


RETARDER Intarder

SUSPENSION



ANTI-ROLL BAR / KNEELING No anti rool bar / Right side kneeling

CHASSIS


TYRES 275 / 70R 22,5 - tubeless / 6+1

RIMS 8.25 x 22.5

ELECTRICAL SYSTEM




STARTER MOTOR 24 V


35


34

OPTIONSAir ConditionIndependent heaterElectrical disabled rampDigital destination board (Front, Rear, Side)Automatic greesing system

Ergonomic drivers cabin for better driving

Useful luggage racks Wheelchair area positioned opposite the centre door

A well-laid interior design

By understanding the local differences in various global markets, we have been able to export our products to more than 70 countries around the world due to developing flexible manufacturing systems.

In order to strengthen our existence in export markets, BMC has appointed distributors around the world. In addition to build-up units, BMC exports vehicles in SKD/CKD (Semi/Complete Knock Down) form which are assembled under BMC licence in several territories.

BMC continues to develop strategic co-operation and alliances with international firms in order to expand its geographical reach.

BMC EXPORT POLICY

For your safety and comfortCITY BUSESThe manufacturer reserves the right to modify the models, technical specifications, equipment, and accessories without

prior notice. There can be changes after the printing of this document (October 2009). No rights can be claimed over the marks and numbers used by the dealer and manufacturer to identify the order or the ordered good. The figures and photos may include optional, non-standard accessories and special equipment. Color differences are due to printing techniques.

October 2009 - 1000www.bmc.com.tr

GENERAL MANAGEMENT & FACTORYKemalpaa Caddesi No: 32

35060 Izmir - TURKEYPhone: +90 232 477 18 00 Fax: +90 232 477 18 77-78-79

EXPORT SALESKemalpaa Caddesi No: 32

35060 Izmir - TURKEYPhone: +90 232 477 18 00 Fax: +90 232 477 18 33


UK OFFICEHavenfields, Aylesbury Road,

Great Missenden Bucks HP 16 9 LS ENGLANDPhone: +44 1494 - 89 08 88 Fax: +44 1494 - 89 08 84


www.bmc.com.tr

City Buses

Documents

Transcript of City Buses