Cisco Packet Tracer 6.0.x errata

Bug ID Short Description Fixed in Version

10219 Program crashes upon selecting "Check Results" (in

conjunction with Activity Wizard)6.0.0.0045

10300 script module + ipc webview + file‐sm: causes crash 6.0.0.0045

10301 Closing a webview after inspecting it causes crash. 6.0.0.0045

10303 Crash ‐ Erase NVRam whilst using configuration wizard 6.0.0.0045

10306 I saw a spelling mistake in one of the messages received

when I installed PT6.0.0.0045

10315 (CPCWirelessClientCfg::connConnect) PT crashes on a specific action

during CISCO DHomesb PT Practice Exam6.0.0.0045

10318 EVAL: Not sure if reproducible. clicked on test activity and

the system crashed.6.0.0.0045

10340 Crashes when doing LAN Switching and Wireless (CCNA 3)

labs6.0.0.0045

10352 (GUI) Crash to Desktop while deleting colored square name 6.0.0.0045

10354 Packet Tracer just quits while doing a login... 6.0.0.0045

10367 QT 4.8: (GUI) Physical Workspace ‐ Jump to Selected

Location crash6.0.0.0045

10405 dmp 6.0.0.0045

10444 QT 4.8 ‐ Crash on docking device tables 6.0.0.0045

10450 Clicking on an OSPF (IPv6) packet... 6.0.0.0045

10485 PT crashed while unconfiguring ipv6 tunnel to ipv4 tunnel 6.0.0.0045

10493 Removing the trunk uplink between switch during the SPT

convergence, the system crashed.6.0.0.0045

10496 (CTcpConnection) crash 6.0.0.0045

10498 (EtherChannel) PT Crashes when configuring L3

Etherchannel6.0.0.0045

10533 QT 4.8: crash on docking pdu info 6.0.0.0045

10534 QT 4.8: crash on docking physical view navigation 6.0.0.0045

10577 (CTcpConnection) PT exits 6.0.0.0045

10604 (DHCP) PT crash when doning save as 6.0.0.0045

10609 Trying to configure multiple VPN 6.0.0.0045

10618 (QoS) crashed on forward time with NM‐ESW‐161 6.0.0.0045

Packet Tracer 6.0.X Errata ListA list of Issues fixed for the PT 6.0.0 and PT 6.0.1 releases

10629 When pinging an IPv6 address a second time from a

different computer it crashs6.0.0.0045

10655 Application crash when this command is execute at the

2960 switch "clear access‐list counters"6.0.0.0045

10662 (QoS) Applying an inspect class‐map to an inspect policy‐

map6.0.0.0045

10675 (DHCP) PT Crashed while performing ping command on

2811 router6.0.0.0045

10696 Packet Tracer Crash from Debug 6.0.0.0045

10698

Three routers, three switches, single area ospf, dhcp, vtp clients,

loopbacks, intervlan routing, nat overload, ppp, chap. Was working on

ACL's when it crashed.

6.0.0.0045

10702 MultiUser 6.0.0.0045

10730 PT crashes when configuring GRE tunnel 6.0.0.0045

10737 Easy vpn server crash 6.0.0.0045

10739 Crash when ? pushed: ephone mac‐address 0000? 6.0.0.0045

10749 Crash while using multiuser 6.0.0.0045

10771 (GUI) Crash in RouterStaticCfg 6.0.0.0045

10774 (OSPF) show ip ospf interface serial 0/0 ‐> crash 6.0.0.0045

10775 (CTcpConnection) PT froze, bombed, shutdown, and

prompted me to send you this :{6.0.0.0045

10837 crypto key zeroize crash 6.0.0.0045

10838 Exception thrown when adding Wireless PC to workspace

in debugger6.0.0.0045

10867 Include OpenSSL license in help files 6.0.0.0045

10873 (GUI) Add PDU crash 6.0.0.0045

10918 PT crash when pinging 6.0.0.0045

10920 ftp crash 6.0.0.0045

10922 show run crash 6.0.0.0045

10930 tracert crash 6.0.0.0045

10945 show flash crash 6.0.0.0045

10952 allowing script crashes PT 6.0.0.0045

10953 removing modem from pc causes crash 6.0.0.0045

11035 VAR.MGR: CRASH ‐ PT(6.0.0.0011) ‐ from telemetry

collector.6.0.0.0045

11044 crash while navigating pc config tab after power warning 6.0.0.0045

11078 CRASH ‐ PT(6.0.0.0011) ‐ from telemetry collector. 6.0.0.0045

11095 Crashed while configuring a port for vlan access 6.0.0.0045

11096 crash 6.0.0.0045

11102 (GUI) Can't view PDU packet in Simulation mode 6.0.0.0045

11105 BGP crash 6.0.0.0045

11117 tracert ipv6 crash 6.0.0.004511134 (HSRP) crash when deleting the device 6.0.0.0045

11231 Crash when file new after stopping MU listen 6.0.0.0045

11313 click on PC crash 6.0.0.004511326 Disconnect ExApp crash in GUI 6.0.0.0045

11329 Starting/Stopping script modules while in full debugger

disables entire GUI6.0.0.0045

11333 device dialog taskbar cross cursor behavior 6.0.0.0045

11353 HSRP is not working well. 6.0.0.0045

11354 Crypto Key Crash 6.0.0.004511388 Crash on file open 6.0.0.0045

11396 Program crash when setting up wireless connection 6.0.0.0045

11398 (GUI) opening a new dialog after viewport causes PT to

crash6.0.0.0045

11423 Entering vlan range command crashes 6.0.0.0045

11430 crash on file new when port status table is open 6.0.0.0045

11442 crash on switching from resize tool to select tool on

physical workspace6.0.0.0045

11449 device table still exists after deleting device 6.0.0.0045

11467 DHCPv6 error 6.0.0.0045

11487 test activity crash 6.0.0.0045

11520 FAQ: IPv6 PDU HOP LIMIT, TRFC and FLOW fields are not populated in

Inbound and Outbound simulation6.0.0.0045

11565 no interface tunnel crash 6.0.0.0045

11571 HSRP: Cisco HSRP UDP Data not shown 6.0.0.0045

11586 Topology Isomorph Prototype: Exposed seed values for

Marvel/XML package6.0.0.0045

11587 Checking the AW locking features 6.0.0.0045

11602 Show Device Dialogue Taskbar option not working

properly, always on6.0.0.0045

11617 PT Crashes when saving reloading 3560 switches 6.0.0.0045

11627 cannot remote access into the linksys after saving pppoe

setting6.0.0.0045

11657 Crash on adding PDU 6.0.0.0045

11664 When removing HSRP commands PT crashes 6.0.0.0045

11668 Error in show standby output 6.0.0.0045

11677 stuck after zooming out all the way in physical view 6.0.0.0045

11722 Insert Entry in Number Variables table without setting

Number Pools causes crash6.0.0.0045

11773 PT crash when disconnect cable 6.0.0.0045

11783 PT crash when fast forward time many times 6.0.0.0045

11881 program crash 6.0.0.0045

11887 Move "View Command Log" into preferences 6.0.0.0045

11931 Preferences are loading with PKT file 6.0.0.0045

11942 AW crashed at EXIT 6.0.0.0045

11967 freeze by set switch to loop 6.0.0.0045

11968 ospf routing table discrepancy 6.0.0.0045

11972 Wrong route shows up in ospf routing table 6.0.0.0045

11984 Ability to pull the same name out of a list using two random variables

against the same pool6.0.0.0045

11994 ipv6 autoconfig not working 6.0.0.0045

12035 Crash when doing ipv6 ping in 2950 6.0.0.0045

12064 PT Crashes when deleting simple Scenario packet 6.0.0.0045

12728 PT60: Feedback Settings not saved 6.0.0.0045

12089 PT60? CRASH ‐ PT(6.0.0.0035) ‐ from telemetry collector. 6.0.0.0045


12868 Power Cycle Crash 6.0.0.0045

12818 encapsulation frame‐relay ietf on serial interface 0/0/0

immediately CRASHES PT6.06.0.0.0045

12117 When typed "no ipv6 ospf cost" PT crashes 6.0.0.0045

13459 Crash during Packet Tracer 1.1.4 6.0.0.0045

13472 HSRP crashes ‐ PB6/39 6.0.0.0045


12448 Crashed in CommandSet::Pc::ipconfig_ip_subnet 6.0.0.0045

12035 Crash when doing ipv6 ping in 2950 6.0.0.0045

13318 Crashed in CSnmpManager::clearTimer() 6.0.0.0045

13557 Crash when viewing Physical Layer 6.0.0.0045



13612 crashed in CServerDialog::event() 6.0.0.0045

12123 FROM IPSEC2 sample, PT CRASHED 6.0.0.0045


13557 Crash when viewing Physical Layer 6.0.0.0045

13706 IPv6 DNS Address Disappears on Client 6.0.0.0045

10297 (GUI) Cluster outside cable connection 6.0.0.0045

10302 (GUI) html tag doesn't work in the Network Description

Windowsow with existing rich text6.0.0.0045

10310 (OSPF) OSPF injects external route on "default‐information originate"

when static route is used6.0.0.0045

10312 Pinging a broadcast address give a weird loss number 6.0.0.0045

10321 Need Unique Identifiers for observables 6.0.0.0045

10331 frame relay ‐ using PDUs 6.0.0.0045

10342 Classes without "event:" declarations in pki do not register

events6.0.0.0045

10353 serial interfaces inconsistently add command "ipv6 ospf cost 781" by

themselves to 1T modules6.0.0.0045

10359 Include use of the “?” in router logs 6.0.0.0045

10368 Qt 4.8: (GUI) Device config Physical tab module glitches 6.0.0.0045

10369 Qt 4.8: (GUI) Physical Device View glitches 6.0.0.0045

10376 (OSPF) show ip route show routes that shouldn't be there 6.0.0.0045

10379 QT 4.8: (GUI) Background images are not being applied to

the whole workspace6.0.0.0045

10380 QT 4.8: (GUI) Physical Workspace device images errors 6.0.0.0045

10384 SM: script module IPC does not work with vector<byte>

data6.0.0.0045

10385 QT 4.8: (GUI) Physical Workspace background doesn't cover up the whole

workspace6.0.0.0045

10386 QT 4.8: (GUI) Can't rename the device in physical

workspace6.0.0.0045

10403 IPC: Crash in IPC due to "Pure virtual function call" 6.0.0.0045

10421 QT 4.8: (GUI) Software and Services tab is empty 6.0.0.0045

10422 QT 4.8: (GUI) Phone power adapter button resizes itself 6.0.0.0045

10434 QT 4.8: (GUI) Answer Network Time Settings text description cutoff 6.0.0.0045

10467 File new crash at script module stop 6.0.0.0045

10468 PC Software script module doesn't work after opening a

pka file and in VS6.0.0.0045

10494 IPv6‐Auto config fails when changing the MAC address 6.0.0.0045

10551 SM: parsing error with script calls 6.0.0.0045

10619 (EtherChannel) etherchannel needs to take into account

failed links6.0.0.0045

10695 Link Local Address only shows when I enable dhcp or

autoconfig6.0.0.0045

10710 can't disconnect from vpn server 6.0.0.0045

10738 (OSPF) router‐id in OSPF disappears after clearing ospf

process6.0.0.0045

10746 show ipv6 int doesn't show tunnel int 6.0.0.0045

10755 (OSPF) default static route through OSPF using default information

originate does not always work6.0.0.0045

10776 redistribute static in bgp does not always propagate

configured static routes6.0.0.0045

10801 PTSA Prototype: Connectivity Tests 6.0.0.0045

10802 PTSA Prototype: Interrupt‐Driven Feedback 6.0.0.0045

10803 PTSA Prototype: Problem Injection 6.0.0.0045

10808 EIGRP redistribute static dont work with sumarized routes

only, whit default‐routes6.0.0.0045

10842 Debug output in the PT debug Windowsow is duplicated 6.0.0.0045

10852 Deserialization of remote networks appends (#) in device

label6.0.0.0045

10891 (GUI) Icons on the right do not work 6.0.0.0045

10912 Review commit

72933a603d6f10d93fdff1ca412dcd68257658b6 made on

6/7/12

6.0.0.0045

10916 ipconfig does not show the correct default gatey 6.0.0.0045

10917 show policy‐map int ser0/0/0 doesn't show packet drop 6.0.0.0045

10919 DNS not working 6.0.0.0045

10968 Interface descriptions are being set to IP address 6.0.0.0045

11005 ICMP packets passing through ACL in Realtime mode 6.0.0.0045

11006 Disconnect link is locked unexpectedly 6.0.0.0045

11016 (GUI) firewallv6 gui remove rule doesn't work 6.0.0.0045

11017 simulation Windowsow flickers all the time 6.0.0.0045

11033 VAR.MGR: Seeds table doesn't allow to rename existing

seeds.6.0.0.0045

11090 Review of firewall 6.0.0.0045

11107 show ip inspect int is empty 6.0.0.0045

11119 Can't create a work product feature in AW 6.0.0.0045

11125 switch trunk encapsulation dot1q on port‐channel gone? 6.0.0.0045

11127 missing eigrp neighbors 6.0.0.0045

11129 ipv6config autoconfig not getting default and dns server 6.0.0.0045

11135 (HSRP) "show standby brief" output is not consistent 6.0.0.0045

11136 (HSRP) problem with 3 routers 6.0.0.0045

11138 (HSRP) interface shutdown issue 6.0.0.0045

11141 (HSRP) some HSRP commands are not saved 6.0.0.0045

11156 standby group‐number ip command is not available on

vlan interface of a 3560 switch6.0.0.0045

11157 show standby show inaccurate state 6.0.0.0045

11168 PC Firewall makes me input an inbound rule even tho it's

already there6.0.0.0045

11180 (GUI) Device Dialog Taskbar expand arrow doesn't work 6.0.0.0045

11193 server wireless module doesn't connect after saving then

opening6.0.0.0045

11194 Delete and Ctrl+Z doesn't bring back cables 6.0.0.0045

11199 can't get default gateway through dhcp the first time 6.0.0.0045

11214 REVIEW: IP address assigned to wireless interface using

IP_Configuration doens't retain6.0.0.0045

11253 Interfaces on remote network cloud connected device MU

offline save does not go up6.0.0.0045

11286 Constant Delay doesn't work 6.0.0.0045

11288 recursion of ipc calls makes last call not return 6.0.0.0045

11307 changing DNS entry in server causes PT to crash 6.0.0.0045

11332 SM: Protocol "this‐sm" is unknown for Script Modules 6.0.0.0045

11384 multiuser across multiple versions of PT 6.0.0.0045

11412 Open Samples tries to open twice. 6.0.0.0045

11416 Porting existing DHCP commands (config mode) to the

switch 29606.0.0.0045

11428 Exapp doesn't work if on another drive on Windowsows 6.0.0.0045

11429 ping fails when configure hsrp preempt 6.0.0.0045

11431 Server with 2 Nics ping fails 6.0.0.0045

11482 network().getDevice(QString:PC0).getProcess(string:HostIp

Process).setDefaultGateway(ip:1.1.1.1) doesn't work6.0.0.0045

11491 OSPFv3 Virtual Link 6.0.0.0045

11505 issue with PC port 6.0.0.0045

11516 Unicast routing not removed when reloading router 6.0.0.0045

11527 no int tunnel does not work. 6.0.0.0045

11535 I can configure ip address on port‐channel interface even

tho it's a switchport6.0.0.0045

11538 Can't remove general prefix 6.0.0.0045

11556 Answer file (miising options) 6.0.0.0045

11561 PT should not allow users to configure ip route to exit on

L2 interface6.0.0.0045

11570 HSRP: show standby output in not consistent 6.0.0.0045

11593 UNCONFIRMED: PT Crashes while Exiting AW 6.0.0.0045

11623 Multiple redundant SSIDs are listed in PC Wireless 6.0.0.0045

11636 physical tab images are cut off 6.0.0.0045

11642 SM: Saving previously signed Script Module without cert

causes unopenable PKA6.0.0.0045

11667 HSRP Standby commands not removed when erasing

configuration file6.0.0.0045

11706 PT reveals passwords 6.0.0.0045

11718 PC's accessories are not placed correctly on the table 6.0.0.0045

11757 configure int port‐channel and the command line hangs 6.0.0.0045

11761 IPC Calls Returning 0.0.0.0 when Var manager has

addresses.6.0.0.0045

11775 HSRP doens't work over multiuser 6.0.0.0045

11776 eigrp version 2 not working over tunnel interfaces on

multiuser6.0.0.0045

11777 HSRP standby track command does not allow serial0/0/0 notation 6.0.0.0045

11778 ospfv6 does not work over multiuser 6.0.0.0045

11789 on sub interfaces the only HSRP command supported is ipv6 6.0.0.0045

11790 no prefix‐delegation 2001::3:0/120

000300010007EC422E02 does not remove it6.0.0.0045

11792 DHCP v6 not giving the correct computer 6.0.0.0045

11794 requesting ip address on pc not showing when static ip is

present6.0.0.0045

11796 (OSPF) different ipv6 routes showing 6.0.0.0045

11798 random invalid ipv6 DNS error appears on replacing modules 6.0.0.0045

11814 can't configure "ipv6 local pool" 6.0.0.0045

11818 IPv6 general‐prefix not addressing interface correctly 6.0.0.0045

11820 "ipv6 dhcp client pd prefix" appears after disabling and enabling "ipv6

address autoconfig"6.0.0.0045

11823 Issue with autoconfig on the dhcp client with "nd other‐ other‐config"

flag on the server interface6.0.0.0045

11828 Locking Tree 6.0.0.0045

11830 SM: software.json in PcSoftware is being loaded from

PT.conf (changes to the string does not save)6.0.0.0045

11831 Issue with editing text 6.0.0.0045

11840 VPN connection doesn't work properly 6.0.0.0045

11847 IPv6 enable command 6.0.0.0045

11856 AW Overall Feedback: Accepts HTML tags only once. Can't

be edited6.0.0.0045

11870 device dialog taskbar position is aligned right when bottom

toolbar is hiden6.0.0.0045

11890 ipv6 tunneling ‐ ping unsuccessful 6.0.0.0045

11892 Lost Telephony commands after saving and restarting PT

6.06.0.0.0045

11896 Pool Names Disappear 6.0.0.0045

11907 VoIP‐ Call establishment issues 6.0.0.0045

11912 Using Variables in both network and mask freezes VM 6.0.0.0045

11915 no virtual‐link neighbor established 6.0.0.0045

11916 ip address and subnet do not show when clicking on Dhcp

radio6.0.0.0045

11921 missing ospf routes 6.0.0.0045

11996 vpn is disconnected message shows up twice 6.0.0.0045

12001 The cluster position is unpredicable 6.0.0.0045

12002 DHCP IPv4 error 6.0.0.0045

12045 on older pka files, devices are locked when they shouldn't

be6.0.0.0045

12079 L3 switch multiarea OSPF bug 6.0.0.0045

12735 PT_60_RELEASE_TASK: Some texts in AW need to be

edited6.0.0.0045

10257 There is no working IPC call to go back a level when inside clusters 6.0.0.0045

10323 PTSA Prototype: Scoring Network Statements no matter

what the AS or process‐id6.0.0.0045

10333 (NTP) ntp display issue 6.0.0.0045

10356 Read only functionality for configuration‐related interface

elements6.0.0.0045

10357 ACL design efficiency 6.0.0.0045

10361 Lock objects and notes created in the initial network 6.0.0.0045

10370 Qt 4.8: (GUI) End Device Desktop tab does not have square

outlines on each app button6.0.0.0045

10371 QT 4.8: IPC ‐

appWindowsow().getActiveFile().getOptions().setBufferFul lAction(int)

not working right

6.0.0.0045

10372 appWindowsow().getRealtimeToolbar().resetNetwork()

does not prompt if you want to reset6.0.0.0045

10388 QT 4.8: (GUI) Using resize tool in Physical Workspace resizes all icons for

different devices6.0.0.0045

10414 QT 4.8: (GUI) set tiled background does not cover up the whole

workspace6.0.0.0045

10420 QT 4.8: (GUI) Zoom buttons in Physical Tab not functioning correctly 6.0.0.0045

10423 (GUI) Device stays clicked after dragging to workspace 6.0.0.0045

10424 (GUI) Static panel in Router config has enormous add

button6.0.0.0045

10425 QT 4.8: RIP panel in Router config has large input fields and

buttons6.0.0.0045

10427 QT 4.8 (GUI): VLAN number and name field are oversized 6.0.0.0045

10452 Pinging a broadcast address give a weird loss number 6.0.0.0045

10463 port‐channel interface allows some configuration options that are not

available on real switch6.0.0.0045

10476 Ping from Switch to switch fails 6.0.0.0045

10488 PC Wireless Profile issue 6.0.0.0045

10608 WPC300N wireless adapter for PC will not go actif 6.0.0.0045

10674 Server port and settings configs not matching 6.0.0.0045

10701 IP settings are not consistent between Global page adn

Interface page6.0.0.0045

10751 Points don't add up correctly in answer tree 6.0.0.0045

10754 no switchport on c3560 ports does not remove them from sh vlan brief 6.0.0.0045

10761 (OSPF) ospf routes are not cleared from routing table if

shutting an ospf link6.0.0.0045

10768 FAQ: ospf over redundant l3 eterchannel establish but can't ping other

network in neighbour router6.0.0.0045

10770 Ethernet interface descriptions (on routers) are not graded right 6.0.0.0045

10773 solicitation message sent from router to pc looks corrupted 6.0.0.0045

10794 PTSA Prototype: OSPF DR/BDR Election 6.0.0.0045

10799 PTSA Prototype: Show Commands 6.0.0.0045

10841 Add more of Cisco devices more variety 6.0.0.0045

10849 Save options with files, load them, and reset them back after closing file 6.0.0.0045

10864 line con shortcut is not accepted anymore 6.0.0.0045

10985 Linksys Router's DHCP server disabled by default 6.0.0.0045

11026 (GUI) ctr+z doesn't bring back the octal cable 6.0.0.0045

11137 (HSRP) "show standby" shows "Standby router is

unknown"6.0.0.0045

11139 (HSRP) "standby" command exists on the serial interface 6.0.0.0045

11140 (HSRP) typo "Standy" 6.0.0.0045

11143 Wireless Router's Single Port Forwarding activity trees

empty strings6.0.0.0045

11151 SM: web view ownership and access to SM 6.0.0.0045

11158 can't do no standby priority 6.0.0.0045

11159 Can't configure more than 1 standby group to the interface 6.0.0.0045

11160 show standby doesn't reflect the right preempt state 6.0.0.0045

11161 can't remove standby group 6.0.0.0045

11162 standby timers command missing subcommands 6.0.0.0045

11163 show standby doesn't show the right active virtual MAC

address6.0.0.0045

11164 standby 0 ipv6 autoconfig needs to check if ipv6 is enabled 6.0.0.0045

11165 standby 0 track command doens't check if the interface exists 6.0.0.0045

11166 some standby commands are not available on the C3560 switch 6.0.0.0045

11167 PC firewall shows port not match 6.0.0.0045

11171 No dns show up for Ipv6 when browsing 6.0.0.0045

11187 can't include free form shape in a cluster 6.0.0.0045

11196 missing "show ipv6 int tunnel0" 6.0.0.0045

11197 "no tunnel source ", "no tunnel mode" and "no tunnel destination" do

not work6.0.0.0045

11198 issue with ping in the copied network 6.0.0.0045

11233 MU listen dialog Port Number edit stays disabled until closing and

reopening6.0.0.0045

11248 (GUI) Can't print Active Dockable Dialog 6.0.0.0045

11249 Right toolbar in physical workspace behavior inconsistent with logical

workspace6.0.0.0045

11319 Show ipv6 int inconsistencies 6.0.0.0045

11320 show ipv6 int vlan is not available on switch 3560 6.0.0.0045

11379 FAQ: Cannot remove routing process in config‐router mode 6.0.0.0045

11424 HSRP IPv4 Commands Missing on 3560 Switch 6.0.0.0045

11432 DNS Server value is not retained 6.0.0.0045

11465 (OSPF) Error with routing update being propagated 6.0.0.0045

11493 New Command: clear ipv6 route 6.0.0.0045

11494 New command: clear ipv6 ospf process 6.0.0.0045

11495 (OSPFv3) NSSA error in IPv6 routing table 6.0.0.0045

11502 Input Spacing on Desktop PC is Crammed 6.0.0.004511554 Activity Grader: Getting Error in Step 3 of "Installing

Activity Grader"6.0.0.0045

11599 missing "show dhcp lease" on vlan interface 6.0.0.0045

11659 no ip dhcp is not supported on switch in build 21 6.0.0.0045

11682 IPv6 addressing does not show when using ipconfig on PCs 6.0.0.0045

11765 got "Command rejected" when configure desirable mode 6.0.0.0045

11774 multiuser cloud popup allignment is not right 6.0.0.0045

11788 Delete goes back to regular pointer when it shouldn't 6.0.0.0045

11819 need to remove "no ipv6 mtu <1280‐1500>" on PT's interface 6.0.0.0045

11913 can't remove area 0 virtual‐link 15.1.1.1 6.0.0.0045

13486 The incorrect wireless module is used with the 1941 router 6.0.0.0045

13480 Error when adding HWIC‐AP‐AG‐B module to 1941 router 6.0.0.0045

12176 Trunk link named 803.1Q instead of 802.1Q 6.0.0.0045

13580 Routing Table Indicates Wrong Number of masks 6.0.0.0045

10389 SM: Remember last Import/Export directory location. 6.0.0.0045

10426 (GUI) IOS Command Log dialog is not in focus on view 6.0.0.0045

10465

QT 4.8: (GUI) the set titled background image show all of the images

from your computer instead of just the files in Cisco Packet Tracer

5.4\backgrounds

6.0.0.0045

11327 Show msgs for telemetry or other exapps that don't let you

change them6.0.0.0045

11339 (GUI) A separator is missing under Extensions menu 6.0.0.0045

11410 Grammatical Error 6.0.0.0045

11719 Power brick from ac adapter is missing when added to an

IP phone6.0.0.0045

10270 Dynamic Total Points Feedback feature 6.0.0.0045

10277 Add more feaature on ipv6 tunneling 6.0.0.0045

10281 Command to turn off proxy arp 6.0.0.0045

10282 (GUI) Option to disable the Inspection Tool 6.0.0.0045

10288 DNSv6 support 6.0.0.0045

10294 Add more IPv6 content based on education and market

requirements6.0.0.0045

10322 ACL Scoring in Assessment Tree 6.0.0.0045

10347

when i want to draw a square and write some text suddenly the program

is closed and ask me do you want to save your project as a strange suffix.

and after that i cant open my project at all

6.0.0.0045

10381 QT 4.8: (GUI) Buffer Full Windowsow is not found 6.0.0.0045

10395 (GUI) Can't login into Linksys web interface 6.0.0.0045

10397 (GUI) Feature requests for Syslog 6.0.0.0045

10433 QT 4.8: (GUI) Can't edit Author Information in Activity

Wizard6.0.0.0045

10438 CSU/DSU 6.0.0.0045

10453 the arp cache table missing entries 6.0.0.0045

10466 (GUI) Physical view devices not sitting on table 6.0.0.0045

10478 IPC signal devicedAdded is called before the device is

actually added6.0.0.0045

10495 IPv6 GUI enhancement requests 6.0.0.0045

10529 FAQ: IPv6 on vlan interface 6.0.0.0045

10543 IPv6 eventually makes problems using static addresses 6.0.0.0045

10547 IPv6 tunnel mode ipv6ip 6.0.0.0045

10613 DNS PDU wrong 6.0.0.0045

10666 Packet Tracer does not perform well with solid state drive

(SSD)6.0.0.0045

10693 IPC: Setting Multiuser Connection 6.0.0.0045

10720 Bug in ipv6 hosts and ip hosts 6.0.0.0045

10733 (GUI) Cannot move Notes when "Move Devices" is locked 6.0.0.0045

10790 Auto accept Script Module access dialog 6.0.0.0045

10836 Separate Peer Address text input 6.0.0.0045

10846 Locking Tree for Remote Network password doesn't work 6.0.0.0045

10853 Changing Parity to odd parity never works 6.0.0.0045

10856 Filter out non‐IPv4 listening addresses in Multiuser Listen

dialog6.0.0.0045

10872 Power button not aligned 6.0.0.0045

10888 PC email address field validation error box doesn't go away 6.0.0.0045

10908 crash on ping 6.0.0.0045

10929 copy paste of devices different from previous PT versions 6.0.0.0045

10931 inspect button name 6.0.0.0045

10932 default gateway doesn't show on PT6.0 6.0.0.0045

10935 PT gets stuck at trying to connect to ftpserver 6.0.0.0045

10937 encryption type empty on PT6.0 6.0.0.0045

10943 (GUI) firewall and firewallv6 gui 6.0.0.0045

10944 Assessment item is not checked 6.0.0.0045

10959 missing assessment items 6.0.0.0045

10961 clock rate not showing up in show run 6.0.0.0045

10963 DNS server doesn't show up in PC Desktop 6.0.0.0045

10975 assessment items being marked correct 6.0.0.0045

10991 Opening PC desktop IP config crashes 6.0.0.0045

10995 inconsistency between Config/Ip Configuration 6.0.0.0045

10998 PT gets stuck at tracert 6.0.0.0045

11000 RIP updates over multiuser. 6.0.0.0045

11007 Completion percentage is wrong 6.0.0.0045

11025 Answer network tree items disabled 6.0.0.0045

11030 terminal server issues 6.0.0.0045

11031 Circle Tool report has inclusion errors when the ellipse shapes are used. 6.0.0.0045

11032 VAR.MGR: Delete button doesn't delete entries in the

Seeds table like it does in Number Pools table6.0.0.0045

11034 VAR.MGR: Seed names can not seem to be used in Number

Pools as min/max entries6.0.0.0045

11038 Dual Interface Server: How do applications "know"? 6.0.0.0045

11039 Improve Usability of Drawing Tool 6.0.0.004511040 (GUI) Edit Filters Dialog 6.0.0.004511057 (GUI) Separate IP telephony audio from sound effects 6.0.0.0045

11072 Topology table extra entries 6.0.0.0045

11076 The ability to suppress device type in Device Label (Name) 6.0.0.0045

11082 Variable Manager crash 6.0.0.0045

11089 Allow inserting seeds to test 6.0.0.0045

11093 (GUI) Mouse over Server connection with 2 NICs connected doesn't show

int name6.0.0.0045

11101 IP Address Variable Range doesn't process correctly 6.0.0.0045

11103 (GUI) the event filter on Windowsows has ACL Filter item while the one

on Linuxx does not have that item6.0.0.0045

11106 Linksys router has throughput of 270Mbp instead of

300Mbp like in PT5.36.0.0.0045

11113 ip configuration disappears 6.0.0.0045

11115 (GUI) Toggle PDU List behavior is different from PT5.3.3 6.0.0.0045

11128 required items shows as 0 6.0.0.0045

11131 activity shows 100% complete with incorrect items 6.0.0.0045

11133 FAQ: Command inconsistency on switches 6.0.0.0045

11145 Crash after reset activity 6.0.0.0045

11148 PT allows configuring interfaces on one device with the

same subnet6.0.0.0045

11174 Peer cloud appears when copying and pasting and undo

redo6.0.0.0045

11181 Palette dialog opens too high on the screen 6.0.0.004511182 Device name of copied device is incremented by 1 6.0.0.0045

11186 (GUI) Extensions Menu doesn't show the font change 6.0.0.0045

11188 logical icons get bigger after control drag copy 6.0.0.0045

11189 (GUI) device label got hidden under Home City icon 6.0.0.0045

11195 Ipv6 Tuneling: consider to change frame instance text 6.0.0.0045

11200 server with 2 nics ‐ changing wireless module sets fa0 to dhcp 6.0.0.0045

11206 CRASH/DEADLOCK ‐ PT(6.0.0.0013) ‐ AW ‐ test activity ‐

edit feedback ‐6.0.0.0045

11220 delete multiple items behavior different from previous

versions6.0.0.0045

11221 FAQ: Circling tool bug 6.0.0.0045

11225 undo delete doesn't redraw unfilled shapes 6.0.0.0045

11227 open pka file crash 6.0.0.0045

11235 Different error message received when type "con" to

command line6.0.0.0045

11236 ip access‐list has extra space in between words 6.0.0.0045

11237 Port 0 should not be a valid peer port number for MU 6.0.0.0045

11250 Select Tool doesn't stay depressed 6.0.0.0045

11262 (GUI) network description box is oversized 6.0.0.0045

11265 show crypto map has extra space between the access‐list

number and the word "permit"6.0.0.0045

11270 copied wireless pc can't connect to wireless 6.0.0.0045

11287 Toggling power on PC switches DHCP back to Static 6.0.0.0045

11297 appWindowsow().fileNew(bool:true) disconnect the connection between

PT and IPCTest6.0.0.0045

11298 network().getDevice(QString:Router0).getProcess(string:D

hcpServer).isEnable() returned false when it should be true6.0.0.0045

11299 get Implementation error calling

appWindowsow().getActiveFile().getVariableManager().get

IpPoolAt(int:0).getNetworkIp()

6.0.0.0045

11300 "appWindowsow().getInfoDialog().setVisible(bool:false)" gives a

corrupted look to the info dialog6.0.0.0045

11303 FAQ: show device dialog taskbar in preferences not

available anymore?6.0.0.0045

11304 FAQ: Cable length effects may cause connections to stay down in

Multiuser offline copy6.0.0.0045

11305 (GUI) Clicking on clear publisher signing scrolls Windowsow down 6.0.0.0045

11306 confirm delete dialog shows up twice 6.0.0.0045

11310 Completion percentage is not 100% 6.0.0.0045

11311 When trying to startup in Linuxx, it will not run 6.0.0.004511315 ip configuration doesn't show default gateway and dns

server in ubuntu6.0.0.0045

11316 default gateway disappears 6.0.0.0045

11381 The Build number on top of the Linuxx Build 18 still says 16 6.0.0.0045

11382 Switchports not acting properly 6.0.0.0045

11385 zoom buttons are switched up 6.0.0.0045

11401 show ipv6 eigrp neighbor 6.0.0.0045

11408 Spelling mistake 6.0.0.0045

11414 IP address and subnet mask of wireless interfaces are

empty on fileOpen6.0.0.0045

11417 Porting existing DHCP show commands to the switch 2960 6.0.0.0045

11426 static radio button missing in ipv6 section in ip config in

desktop6.0.0.0045

11427 Timer Intervals for Hsrp are wroing 6.0.0.0045

11433 FastEthernet ip add initial network setup gets changed and

unselected6.0.0.0045

11436 Save Offline Copy As under MultiUser Menu doens't have

the ... at the end6.0.0.0045

11437 File Ope and Save As items under File Menu has NO space

between the word and "..."6.0.0.0045

11438 Print item under File Menu missing "..." 6.0.0.0045

11439 Interface Locking doens't work on Font and Custom

Interfaces6.0.0.0045

11446 unable to dock navigation Windowsow 6.0.0.0045

11453 missing shape 6.0.0.0045

11458 Unsupported command: show ip route 192.168.48.0

255.255.254.06.0.0.0045

11463 Unsupported commands: show ip route summary and debug eigrp

summary commands6.0.0.0045

11471 FAQ: Error when pasting commands 6.0.0.0045

11473 resize Port Status Summary Table Windowsow does not

resize content6.0.0.0045

11479 PT crash when execute

appWindowsow().fileNew(bool:false)6.0.0.0045

11511 FAQ: mouse over the octal cable's port light 6.0.0.0045

11514 when typing #con in the terminal it allows you to go to

configure terminal instead of reporting ambiguous command6.0.0.0045

11532 power cycle devices does not close all opened

Windowsows/widgets6.0.0.0045

11539 Crashed in CWorkstationDialog::useStaticv6(...) 6.0.0.0045

11550 Not getting ambiguous command when entering only a single letter 6.0.0.0045

11553 (OSPFv3) routing is showing wrong routes 6.0.0.0045

11557 DECISION: no error log shows up when configure no switchport on port‐

channel interface6.0.0.0045

11558 Error in Show ipv6 int s0/0/0 output 6.0.0.0045

11559 no error message show up when configure channel‐group

on non switch‐port interface6.0.0.0045

11573 Save Offline Copy As does not load save dialog 6.0.0.0045

11574 (FAQ) default gateway doesn't show on mouseover 6.0.0.0045

11588 various locking tree features not working as expected 6.0.0.0045

11592 "New PT Script Module..." opens two 6.0.0.0045

11595 PT 6.0 Build 19 crashes on Algorithm Settings in Ubuntu 6.0.0.0045

11603 View Command Log Command Not Working in Ubuntu 6.0.0.0045

11604 PT MU version checking direction 6.0.0.0045

11611 IPv6 ASDL Error 6.0.0.0045

11614 Show ipv6 interface s0/0/0 command has missing

information6.0.0.0045

11616 OSPF PDU Error 6.0.0.0045

11619 Configure Device is locked when it shouldn't be 6.0.0.0045

11620 click static button clear the ipv6 default gateway 6.0.0.0045

11621 undo delete adds outline to shape 6.0.0.0045

11622 PC IP and subnet gets removed when closing ip config dialog 6.0.0.0045

11625 ip host being graded wrong 6.0.0.0045

11631 draw shape then resize crash 6.0.0.0045

11633 console cable lights are yellow when connected to wrong

port, used to be red6.0.0.0045

11634 opening old files adds outline to shape 6.0.0.0045

11635 (GUI) Can't print Active Dockable Dialog 6.0.0.0045

11640 new ipc calls 6.0.0.0045

11643 Server uses second port gateway as the default gateway 6.0.0.0045

11644 Items from "Copy from Answer Network" dont appear 6.0.0.0045

11648 Save files dialogue does not go away in PT6.0 Build 22 6.0.0.0045

11649 PT Crashes when you enter the "standby 1 track serial 0/0

command"6.0.0.0045

11656 In Ubuntu, Complex PDU acts like a simple PDU 6.0.0.004511658 dir flash not working for IOS15 6.0.0.0045

11663 Etherchannel Output 6.0.0.0045

11665 Inconsistent Configuration for IPv6 Static Neighbor compared to real

equipment6.0.0.0045

11669 HSRP Standby commands not saved 6.0.0.0045

11672 disable password button in Preferences/Administrative tab

does not work6.0.0.0045

11673 Cannot open scenario description and network

information Windowsows6.0.0.0045

11676 Can't edit the scenario description in Linuxx 6.0.0.004511680 Draw Polygon art doesn't show in pka 6.0.0.0045

11691 changing wireless channel in router does not reflect in PC 6.0.0.0045

11724 Cables disappear 6.0.0.0045

11742 power adapter for ip phone needs to be replaced 6.0.0.0045

11750 IPv6 DHCP UDP Ports Reversed 6.0.0.0045

11753 IIP: Student Final Configs are not showing in the IIP 6.0.0.0045

11754 Switch port issue 6.0.0.0045

11755 Font Size 12 6.0.0.004511758 Show IPv6 DHCP Binding not reporting active clients 6.0.0.0045

11759 missing error message when configure channel‐protocol 6.0.0.0045

11764 ipv6 compatible product not there 6.0.0.0045

11780 dns doesn't work over multiuser 6.0.0.0045

11793 copy/paste undo redo on 6.0.0.0045

11806 users can configure routing protocol on the switch even

tho "ip routing" is not configured6.0.0.0045

11807 add assessment items for isatap client 6.0.0.0045

11834 vpn disconnect doesn't behave right 6.0.0.0045

11843 Able to connect octal cable to any port when port visibility

is enabled6.0.0.0045

11853 Crash during save as 6.0.0.0045

11869 loading pkz problem 6.0.0.0045

11884 Physical Isomorph coordinate issue 6.0.0.0045

11889 pc in file doesn't have ip address configured even tho it's

using dhcp6.0.0.0045

11891 when show device task bar preference changes, the bar should change

with it immediately6.0.0.0045

11910 PT crash when configure ipv6 ospf 1 area 1 6.0.0.0045

11922 Removing nonexistent static route crash in GUI 6.0.0.0045

11928 Font and background colors for the server can't be

changed6.0.0.0045

11952 HSRP's standby ip can not ping 6.0.0.0045

11969 Null pointer check in bool

Ospf::COspfv3Process::setAreaVirtualLink6.0.0.0045

11971 Unable to ping Problem with IPSec 6.0.0.0045

12004 Analog Phone handset creates two images, hook and

unhook images6.0.0.0045

12005 duplicate pool names allowed when it shouldnt 6.0.0.0045

12006 Note and Delete tool can select area in Physical Workspace 6.0.0.0045

12007 Inconsistency with drawing and deleting shapes in Physical

Workspace6.0.0.0045

12008 Initial network locking error on clusters 6.0.0.0045

12011 ipv6 ospf nssa 6.0.0.0045

12012 undo and redo can make more copies of devices than the

undo6.0.0.0045

12015 Options preferences save issue 6.0.0.0045

12017 Entering Activity Wizard freezes PT 6.0.0.0045

12018 Mouse cursor on the Drawing mode goes back to Select mode after zoom

in, out, and reset, but still able to draw6.0.0.0045

12019 Network Description Dock icon is not working 6.0.0.004512036 show ip route ospf missing routes 6.0.0.0045

12054 show standby brief dose not show VLAN interface number

when HSRP configure.6.0.0.0045

12062 IP Phone not getting ip address 6.0.0.0045

12067 By default, Options ‐> Preferences ‐> Interface, "Play

Telephony Sound" was not saved6.0.0.0045

12081 IPC Call 6.0.0.0045

12734 Wireless open sample 802_11a_b_g_n Server0 NEEDS TO BE

RECONFIGURED to make it work6.0.0.0045

12087 L3 switch interface cannot be converted to routed interface 6.0.0.0045

11262 network description box is oversized 6.0.1.0011

12006 Note and Delete tool can select area in Physical Workspace6.0.1.0011

12007Inconsistency with drawing and deleting shapes in Physical Workspace

6.0.1.0011

12892 Network Information text format 6.0.1.001112894 Graphic palette issues 6.0.1.0011

13522 Network Description setting cannot be updated on EXIT6.0.1.0011

13633 IPC call for MenuItem only works for items added via IPC6.0.1.0011

13643 Crash when doing ipv6 ping in 2950-24 6.0.1.001113698 removing vlan interface causing HSRP to crash 6.0.1.001113738 Build 45: IPv6 Auto Config PC loses Def Gateway 6.0.1.001113739 EIGRP IPv6 no neighborship until reset interface 6.0.1.001113740 Object Location Fills Entire Table 6.0.1.0011

13750On a wired end device the Gui disappears when you change the IP

6.0.1.0011

13780 removing subinterface causing HSRP to crash 6.0.1.001113794 Port security does not work with RSTP 6.0.1.001113915 Floating Link Lights 6.0.1.001114006 Ipv6 autoconfig is not DHCPv6 6.0.1.001114016 HSRP in AW errors and missing nodes 6.0.1.0011

14065Server host loses IPv4 default gateway under certain conditions; subnet mask reset to classful default

6.0.1.0011

14121 no images in Server 6.0.1.001114152 The scoringmodel.js has a bug 6.0.1.0011

14155configuring ipv6 hsrp on fa0/1 without ipv6 enabled returning an error msg referencing wrong port name

6.0.1.0011

14195 Crash when doing extended ipv6 ping on 2950-24 6.0.1.0011

14202dhcp address changes when you close and reopen ip config window

6.0.1.0011

14217If DHCP request fails and a static address is entered then DHCP clicked it shows Success

6.0.1.0011

14218 License shows inactive while under evaluation licensing6.0.1.0011

14228DHCP does not send request unless you click DHCP then Static then DHCP again

6.0.1.0011

14234 OSPFv3 Passive Interface 6.0.1.0011

Cisco Packet Tracer 6.0.x errata

Education

Transcript of Cisco Packet Tracer 6.0.x errata