Cisco NX-OS System Messages Reference€¦ · Send document comments to...
Transcript of Cisco NX-OS System Messages Reference€¦ · Send document comments to...
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Cisco NX-OS System Messages ReferenceSeptember 22, 2010
Americas HeadquartersCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706 USAhttp://www.cisco.comTel: 408 526-4000
800 553-NETS (6387)Fax: 408 527-0883
Text Part Number: OL-23717-01
http://www.cisco.com
-
Send document comments to nexus7k - feedback -doc@c i sco .com
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.
THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.
The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB’s public domain version of the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California.
NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS” WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.
IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1005R)
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
Cisco NX-OS System Messages Reference © 2008 Cisco Systems, Inc. All rights reserved.
http://www.cisco.com/go/trademarks
-
Send document comments to nexus7k - feedback -doc@c i sco .com
OL-23717-01
C O N T E N T S
Preface xvii
Audience xvii
Organization xvii
Document Conventions ii-xvii
Release 5.0 Document Title Variables xviii
Obtaining Documentation and Submitting a Service Request xx
C H A P T E R 1 Introduction to System Messages for the Cisco NX-OS 1-1
System Log Message Format 1-1Syslog Format On a Resident Switch 1-1Syslog Format On a Remote-Logging Server 1-3
Capturing System Messages and History 1-5Saving the System Messages Log 1-5Logging System Messages to a Syslog Server 1-5
C H A P T E R 2 System Messages and Recovery Procedures for Cisco NX-OS 2-1
AAA Messages 2-1AAA-1 2-1AAA-2 2-1AAA-3 2-2AAA-6 2-2
AAM Messages 2-2AAM-2 2-2AAM-3 2-3
ACL Messages 2-3ACL-2 2-3ACL-4 2-5ACL-5 2-5ACL-6 2-5
ACLLOG Messages 2-7ACLLOG-4 2-7ACLLOG-6 2-7
ACLMGR Messages 2-7ACLMGR-2 2-7
iCisco NX-OS System Messages Reference
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Contents
ACLMGR-3 2-9ACLMGR-4 2-10ACLMGR-6 2-11
ACLQOS-SLOT# Messages 2-12ACLQOS-SLOT#-2 2-12ACLQOS-SLOT#-3 2-13ACLQOS-SLOT#-4 2-13ACLQOS-SLOT#-5 2-14
ACLTCAM Messages 2-15ACLTCAM-2 2-15ACLTCAM-3 2-18ACLTCAM-4 2-18ACLTCAM-6 2-19
AM Messages 2-19AM-2 2-19AM-3 2-23AM-5 2-26AM-6 2-27
ASCII-CFG Messages 2-28ASCII-CFG-2 2-28ASCII-CFG-3 2-29ASCII-CFG-6 2-29
BGP Messages 2-30BGP-3 2-31BGP-4 2-32
BIOS_DAEMON Messages 2-33BIOS_DAEMON-2 2-33
BIOS_DAEMON-SLOT# Messages 2-34BIOS_DAEMON-SLOT#-2 2-34
BOOTUP_TEST Messages 2-34BOOTUP_TEST-2 2-34
BOOTVAR Messages 2-35BOOTVAR-2 2-35BOOTVAR-3 2-36BOOTVAR-5 2-37BOOTVAR-6 2-38
CALLHOME Messages 2-39CALLHOME-2 2-39CALLHOME-3 2-39
iiCisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Contents
CALLHOME-6 2-40
CDP Messages 2-40CDP-2 2-40CDP-3 2-41CDP-4 2-42CDP-5 2-42CDP-6 2-43
CERT_ENROLL Messages 2-44CERT_ENROLL-2 2-44CERT_ENROLL-3 2-44CERT_ENROLL-6 2-45
CFS Messages 2-45CFS-2 2-45CFS-3 2-46CFS-4 2-48CFS-6 2-49
CIMSRVPROV Messages 2-51CIMSRVPROV-2 2-51CIMSRVPROV-3 2-52CIMSRVPROV-6 2-52
CLIS Messages 2-53CLIS-5 2-53
CLOUD Messages 2-53CLOUD-2 2-53CLOUD-3 2-53CLOUD-6 2-54
CLUSTER Messages 2-54CLUSTER-2 2-54
CMPPROXY Messages 2-55CMPPROXY-2 2-55CMPPROXY-5 2-55CMPPROXY-6 2-56
COPP Messages 2-56COPP-2 2-56COPP-3 2-56COPP-5 2-57COPP-6 2-57
CORE-DMON Messages 2-57CORE-DMON-2 2-58
iiiCisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Contents
CORE-DMON-3 2-58
CPPA_MGR Messages 2-58CPPA_MGR-3 2-58CPPA_MGR-5 2-59
CREDITMON-SLOT# Messages 2-60CREDITMON-SLOT#-2 2-61
CTS Messages 2-61CTS-2 2-61CTS-3 2-64CTS-5 2-64
DEBUGPROXY Messages 2-64DEBUGPROXY-6 2-64
DEV_LOG Messages 2-64DEV_LOG-3 2-64
DEV_LOG-SLOT# Messages 2-65DEV_LOG-SLOT#-4 2-65
DEVICE-ALIAS Messages 2-65DEVICE-ALIAS-2 2-65DEVICE-ALIAS-3 2-65DEVICE-ALIAS-6 2-69
DEVICE_TEST Messages 2-71DEVICE_TEST-2 2-71DEVICE_TEST-3 2-74DEVICE_TEST-4 2-74DEVICE_TEST-5 2-75DEVICE_TEST-6 2-75
DFTM Messages 2-75DFTM-3 2-75
DHCP_SNOOP Messages 2-76DHCP_SNOOP-2 2-76DHCP_SNOOP-3 2-77DHCP_SNOOP-4 2-79DHCP_SNOOP-6 2-80
DIAG_PORT_LB Messages 2-82DIAG_PORT_LB-2 2-82DIAG_PORT_LB-3 2-83DIAG_PORT_LB-5 2-87
DIAGCLIENT Messages 2-87
ivCisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Contents
DIAGCLIENT-2 2-88DIAGCLIENT-3 2-88DIAGCLIENT-4 2-89DIAGCLIENT-5 2-89
DIAGMGR Messages 2-90DIAGMGR-2 2-90DIAGMGR-3 2-91DIAGMGR-4 2-91DIAGMGR-5 2-92DIAGMGR-6 2-93
DMM-SLOT# Messages 2-93DMM-SLOT#-5 2-94
DOT1X Messages 2-96DOT1X-2 2-96DOT1X-3 2-96DOT1X-4 2-97DOT1X-5 2-98
DPP_DEBUG Messages 2-99DPP_DEBUG-2 2-99
DPVM Messages 2-99DPVM-2 2-100DPVM-3 2-100DPVM-4 2-101DPVM-6 2-101
DSTATS Messages 2-101DSTATS-2 2-102DSTATS-3 2-102
ELTM Messages 2-103ELTM-2 2-104ELTM-6 2-104
ELTMC-SLOT# Messages 2-105ELTMC-SLOT#-2 2-105
EOU Messages 2-107EOU-2 2-107EOU-5 2-107EOU-6 2-107EOU-7 2-109
EPLD_UPGRADE Messages 2-109EPLD_UPGRADE-2 2-110
vCisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Contents
EPP Messages 2-110EPP-5 2-110
ETH-PORT-SEC Messages 2-110ETH-PORT-SEC-2 2-110ETH-PORT-SEC-3 2-111ETH-PORT-SEC-5 2-112
ETH_PORT_CHANNEL Messages 2-113ETH_PORT_CHANNEL-1 2-113ETH_PORT_CHANNEL-2 2-114ETH_PORT_CHANNEL-3 2-114ETH_PORT_CHANNEL-4 2-117ETH_PORT_CHANNEL-5 2-118ETH_PORT_CHANNEL-6 2-120ETH_PORT_CHANNEL-7 2-121
ETHPORT Messages 2-122ETHPORT-2 2-122ETHPORT-3 2-123ETHPORT-4 2-125ETHPORT-5 2-125
EUREKA_USD Messages 2-136EUREKA_USD-3 2-136
EVMC Messages 2-136EVMC-3 2-136EVMC-5 2-136
EVMS Messages 2-137EVMS-2 2-137EVMS-4 2-137
EXCEPTIONLOG-SLOT# Messages 2-137EXCEPTIONLOG-SLOT#-2 2-138
FC-TUNNEL Messages 2-138FC-TUNNEL-3 2-138FC-TUNNEL-5 2-140
FCC Messages 2-140FCC-2 2-140FCC-5 2-140FCC-6 2-141
FCC_LC Messages 2-142FCC_LC-2 2-142FCC_LC-5 2-142
viCisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Contents
FCC_LC-6 2-143
FCD Messages 2-143FCD-7 2-143
FCDD-SLOT# Messages 2-144FCDD-SLOT#-3 2-144FCDD-SLOT#-4 2-144FCDD-SLOT#-5 2-144FCDD-SLOT#-7 2-145
FCDDH-SLOT# Messages 2-145FCDDH-SLOT#-3 2-145FCDDH-SLOT#-4 2-146FCDDH-SLOT#-5 2-146
FCDOMAIN Messages 2-146FCDOMAIN-2 2-146FCDOMAIN-3 2-149FCDOMAIN-4 2-152FCDOMAIN-5 2-152FCDOMAIN-6 2-154FCDOMAIN-7 2-159
FCFWD Messages 2-161FCFWD-3 2-161FCFWD-4 2-162FCFWD-6 2-162
FCNS Messages 2-162FCNS-2 2-162FCNS-3 2-163FCNS-4 2-164FCNS-6 2-164
FCS Messages 2-164FCS-2 2-165FCS-3 2-165FCS-4 2-167FCS-5 2-167FCS-6 2-168
FCSP-MGR Messages 2-168FCSP-MGR-2 2-168
FDMI Messages 2-170FDMI-2 2-170FDMI-3 2-171
viiCisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Contents
FDMI-4 2-172FDMI-6 2-172
FEATURE-MGR Messages 2-173FEATURE-MGR-2 2-173
FEX Messages 2-173FEX-2 2-173FEX-5 2-174
FICON Messages 2-174FICON-2 2-175FICON-3 2-175FICON-5 2-177FICON-6 2-177
FLOGI Messages 2-178FLOGI-1 2-178FLOGI-2 2-179FLOGI-4 2-179FLOGI-5 2-179
FS-DAEMON Messages 2-180FS-DAEMON-2 2-180
FSCM Messages 2-180FSCM-2 2-180
FSPF Messages 2-180FSPF-2 2-181FSPF-3 2-181FSPF-4 2-183FSPF-5 2-184FSPF-6 2-185FSPF-7 2-186
FWM Messages 2-186FWM-0 2-186FWM-1 2-187FWM-2 2-187FWM-3 2-189FWM-4 2-190FWM-6 2-190
GLBP Messages 2-190GLBP-2 2-191GLBP-3 2-191GLBP-4 2-193
viiiCisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Contents
GLBP-5 2-194
HEAP Messages 2-196HEAP-3 2-197
HSRP_ENGINE Messages 2-197HSRP_ENGINE-3 2-197HSRP_ENGINE-4 2-197HSRP_ENGINE-6 2-198
IKE Messages 2-200IKE-3 2-200IKE-4 2-202IKE-6 2-202
ILC-SPAN Messages 2-203ILC-SPAN-3 2-203
ILC_HELPER Messages 2-203ILC_HELPER-2 2-203ILC_HELPER-3 2-203ILC_HELPER-6 2-204
IM Messages 2-204IM-3 2-204IM-5 2-205
IMAGE_DNLD-SLOT# Messages 2-205IMAGE_DNLD-SLOT#-2 2-206IMAGE_DNLD-SLOT#-4 2-207IMAGE_DNLD-SLOT#-5 2-207
IMAGE_UPGRADE-SLOT# Messages 2-207IMAGE_UPGRADE-SLOT#-2 2-207IMAGE_UPGRADE-SLOT#-4 2-208IMAGE_UPGRADE-SLOT#-6 2-208
INTERFACE_VLAN Messages 2-208INTERFACE_VLAN-5 2-208
IOA_LC Messages 2-210IOA_LC-5 2-210
IP Messages 2-211IP-2 2-211IP-3 2-211IP-4 2-211IP-6 2-212
IPACL Messages 2-212
ixCisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Contents
IPACL-0 2-213IPACL-1 2-213IPACL-2 2-213IPACL-3 2-213IPACL-4 2-214IPACL-5 2-214IPACL-6 2-214
IPFC Messages 2-214IPFC-2 2-214IPFC-3 2-215IPFC-5 2-215IPFC-6 2-215
IPQOSMGR Messages 2-216IPQOSMGR-2 2-216IPQOSMGR-3 2-217IPQOSMGR-4 2-217IPQOSMGR-6 2-218
IPQOSMGR-SLOT# Messages 2-218IPQOSMGR-SLOT#-3 2-218
IPS Messages 2-218IPS-2 2-218IPS-3 2-219IPS-4 2-224IPS-5 2-225IPS-7 2-234
IPS_SB_MGR-SLOT# Messages 2-235IPS_SB_MGR-SLOT#-2 2-235IPS_SB_MGR-SLOT#-3 2-235IPS_SB_MGR-SLOT#-4 2-236IPS_SB_MGR-SLOT#-6 2-236
IPSEC Messages 2-236IPSEC-2 2-237IPSEC-3 2-237IPSEC-5 2-238IPSEC-6 2-239IPSEC-7 2-239
IPV6 Messages 2-240IPV6-2 2-240IPV6-3 2-240
xCisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Contents
IPV6-4 2-241IPV6-6 2-241
ISAPI-SLOT# Messages 2-242ISAPI-SLOT#-0 2-242ISAPI-SLOT#-1 2-242ISAPI-SLOT#-2 2-243ISAPI-SLOT#-3 2-244ISAPI-SLOT#-4 2-245ISAPI-SLOT#-5 2-245ISAPI-SLOT#-6 2-246ISAPI-SLOT#-7 2-247
ISNS Messages 2-247ISNS-2 2-248
IVR Messages 2-248IVR-2 2-248IVR-3 2-252IVR-4 2-260IVR-5 2-261IVR-6 2-264IVR-7 2-265
KSINK Messages 2-266KSINK-3 2-266KSINK-6 2-269
L2FM Messages 2-269L2FM-0 2-269L2FM-1 2-270L2FM-2 2-270L2FM-4 2-271L2FM-6 2-271
L2FMC-SLOT# Messages 2-271L2FMC-SLOT#-0 2-272L2FMC-SLOT#-2 2-272L2FMC-SLOT#-5 2-272L2FMC-SLOT#-6 2-273
L2MCAST-SLOT# Messages 2-274L2MCAST-SLOT#-0 2-274L2MCAST-SLOT#-2 2-274L2MCAST-SLOT#-6 2-275
LACP Messages 2-275
xiCisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Contents
LACP-3 2-276LACP-5 2-277
LC-FCFWD Messages 2-278LC-FCFWD-3 2-278
LC-SPAN Messages 2-278LC-SPAN-3 2-278
LC_CFG-SLOT# Messages 2-278LC_CFG-SLOT#-2 2-279
LC_PORT_CHANNEL-SLOT# Messages 2-279LC_PORT_CHANNEL-SLOT#-0 2-279LC_PORT_CHANNEL-SLOT#-3 2-280
LC_PORT_MGR-SLOT# Messages 2-280LC_PORT_MGR-SLOT#-2 2-280
LC_RDL Messages 2-280LC_RDL-3 2-280LC_RDL-6 2-281
LIBBASE_SVC Messages 2-282LIBBASE_SVC-2 2-282LIBBASE_SVC-5 2-282
LIBGD Messages 2-283LIBGD-2 2-283LIBGD-3 2-283LIBGD-5 2-284LIBGD-6 2-284
LICMGR Messages 2-284LICMGR-0 2-284LICMGR-1 2-285LICMGR-2 2-285LICMGR-3 2-286LICMGR-4 2-288LICMGR-6 2-289
LLDP Messages 2-290LLDP-3 2-290LLDP-5 2-291LLDP-6 2-291
MAC-SLOT# Messages 2-292MAC-SLOT#-2 2-292
MCAST Messages 2-292
xiiCisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Contents
MCAST-2 2-292MCAST-4 2-292MCAST-5 2-293
MCECTEST Messages 2-293MCECTEST-3 2-293MCECTEST-5 2-294MCECTEST-6 2-294
MCM Messages 2-294MCM-5 2-294
MFDM Messages 2-294MFDM-2 2-295
MODULE Messages 2-295MODULE-2 2-295MODULE-3 2-298MODULE-4 2-298MODULE-5 2-299MODULE-6 2-301
MONITOR Messages 2-301MONITOR-6 2-301
MSP Messages 2-302MSP-5 2-302
NFM Messages 2-302NFM-2 2-302NFM-3 2-303NFM-4 2-305NFM-5 2-305NFM-6 2-306NFM-7 2-307
NFP-SLOT# Messages 2-307NFP-SLOT#-2 2-307
NOHMS Messages 2-308NOHMS-2 2-308
NPC-SLOT# Messages 2-311NPC-SLOT#-3 2-311NPC-SLOT#-4 2-311NPC-SLOT#-5 2-312
NPV Messages 2-312NPV-2 2-312
xiiiCisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Contents
NPV-3 2-313NPV-4 2-316NPV-5 2-317NPV-6 2-318NPV-7 2-321
NTP Messages 2-321NTP-2 2-321NTP-3 2-322NTP-6 2-322
NVP Messages 2-323NVP-6 2-323
NVP-SLOT# Messages 2-323NVP-SLOT#-2 2-324
OC_USD Messages 2-324OC_USD-2 2-324
ORI_MAC Messages 2-324ORI_MAC-6 2-324
OTM Messages 2-324OTM-2 2-325OTM-3 2-325OTM-5 2-325OTM-6 2-325
PFMA Messages 2-326PFMA-0 2-326PFMA-1 2-329PFMA-2 2-329PFMA-3 2-340PFMA-4 2-341PFMA-5 2-341PFMA-7 2-343
PHY_USD-SLOT# Messages 2-343PHY_USD-SLOT#-4 2-343
PIXM Messages 2-343PIXM-2 2-343PIXM-3 2-344PIXM-4 2-344
PIXMC Messages 2-345PIXMC-2 2-345PIXMC-3 2-345
xivCisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Contents
PIXMC-4 2-345
PLATFORM Messages 2-345PLATFORM-0 2-345PLATFORM-1 2-348PLATFORM-2 2-349PLATFORM-3 2-363PLATFORM-4 2-365PLATFORM-5 2-366PLATFORM-6 2-368PLATFORM-7 2-368
PLOG Messages 2-368PLOG-4 2-368
PLOG_SUP Messages 2-369PLOG_SUP-4 2-369
PORT Messages 2-369PORT-2 2-369PORT-3 2-370PORT-4 2-370PORT-5 2-371
PORT-CHANNEL Messages 2-387PORT-CHANNEL-1 2-387PORT-CHANNEL-2 2-388PORT-CHANNEL-3 2-388PORT-CHANNEL-4 2-390PORT-CHANNEL-5 2-391PORT-CHANNEL-6 2-392PORT-CHANNEL-7 2-392
PORT-PROFILE Messages 2-393PORT-PROFILE-2 2-393PORT-PROFILE-3 2-393PORT-PROFILE-6 2-395
PORT-RESOURCES Messages 2-396PORT-RESOURCES-3 2-396PORT-RESOURCES-5 2-396
PORT-SECURITY Messages 2-396PORT-SECURITY-2 2-397PORT-SECURITY-3 2-397PORT-SECURITY-4 2-399PORT-SECURITY-6 2-399
xvCisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Contents
PORT_CHANNEL Messages 2-399PORT_CHANNEL-1 2-400PORT_CHANNEL-2 2-400PORT_CHANNEL-3 2-401PORT_CHANNEL-4 2-401PORT_CHANNEL-5 2-402PORT_CHANNEL-6 2-404PORT_CHANNEL-7 2-404
PORT_SECURITY Messages 2-405PORT_SECURITY-2 2-405PORT_SECURITY-3 2-405PORT_SECURITY-4 2-407PORT_SECURITY-6 2-407
PORTPROFILE Messages 2-407PORTPROFILE-3 2-408PORTPROFILE-4 2-409PORTPROFILE-5 2-409
PRIVATE_VLAN Messages 2-409PRIVATE_VLAN-3 2-409PRIVATE_VLAN-5 2-410
PROC_MGR-SLOT# Messages 2-412PROC_MGR-SLOT#-2 2-412PROC_MGR-SLOT#-3 2-415PROC_MGR-SLOT#-4 2-415PROC_MGR-SLOT#-6 2-415
PSS Messages 2-415PSS-0 2-415PSS-1 2-416PSS-2 2-417PSS-4 2-418PSS-5 2-418
QOS Messages 2-419QOS-2 2-419QOS-3 2-420QOS-4 2-421QOS-6 2-422
RADIUS Messages 2-424RADIUS-2 2-424RADIUS-3 2-424
xviCisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Contents
RADIUS-5 2-425RADIUS-6 2-425
RDL Messages 2-425RDL-2 2-426RDL-3 2-426RDL-6 2-427
RES_MGR Messages 2-428RES_MGR-1 2-428RES_MGR-2 2-428RES_MGR-3 2-428RES_MGR-4 2-429RES_MGR-5 2-430RES_MGR-6 2-431
RIB Messages 2-431RIB-0 2-431RIB-1 2-431RIB-2 2-432RIB-3 2-432RIB-4 2-433RIB-5 2-434RIB-6 2-434
RLIR Messages 2-434RLIR-2 2-434RLIR-6 2-435
RM Messages 2-436RM-6 2-436
RM-SLOT# Messages 2-436RM-SLOT#-2 2-436RM-SLOT#-4 2-437
RSCN Messages 2-437RSCN-2 2-438RSCN-4 2-439RSCN-6 2-439
SAL Messages 2-439SAL-5 2-440
SAN_EXT_TUNER Messages 2-440SAN_EXT_TUNER-3 2-440
SATCTRL-SLOT# Messages 2-440SATCTRL-SLOT#-2 2-440
xviiCisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Contents
SATCTRL-SLOT#-4 2-442SATCTRL-SLOT#-5 2-442
SCHEDULER Messages 2-442SCHEDULER-2 2-443SCHEDULER-3 2-443SCHEDULER-4 2-444SCHEDULER-6 2-444
SCSI-TARGET Messages 2-444SCSI-TARGET-2 2-444SCSI-TARGET-3 2-445SCSI-TARGET-7 2-447
SDV Messages 2-447SDV-2 2-447SDV-3 2-448SDV-4 2-450SDV-6 2-450SDV-7 2-450
SECURITYD Messages 2-450SECURITYD-2 2-450SECURITYD-3 2-452SECURITYD-6 2-452
SENSOR_USD Messages 2-453SENSOR_USD-2 2-453SENSOR_USD-3 2-453SENSOR_USD-5 2-454
SESSION-MGR Messages 2-454SESSION-MGR-2 2-455SESSION-MGR-3 2-455SESSION-MGR-4 2-455
SFC Messages 2-455SFC-3 2-455
SFM Messages 2-456SFM-2 2-456SFM-6 2-456
SKSD Messages 2-456SKSD-5 2-456
SKT_USD Messages 2-458SKT_USD-6 2-458
xviiiCisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Contents
SME_CPP Messages 2-458SME_CPP-2 2-458SME_CPP-3 2-459SME_CPP-5 2-461
SME_CPP-SLOT# Messages 2-465SME_CPP-SLOT#-2 2-465SME_CPP-SLOT#-3 2-466SME_CPP-SLOT#-4 2-467
SMM Messages 2-467SMM-3 2-467SMM-5 2-470SMM-6 2-470
SNMPD Messages 2-470SNMPD-1 2-471SNMPD-2 2-471SNMPD-3 2-471SNMPD-4 2-471SNMPD-5 2-471SNMPD-6 2-472SNMPD-7 2-472
SPAN Messages 2-472SPAN-2 2-472SPAN-3 2-472SPAN-5 2-473SPAN-6 2-474
SPI-SLOT# Messages 2-474SPI-SLOT#-2 2-474
STP Messages 2-475STP-2 2-475STP-3 2-482STP-4 2-483STP-6 2-484
SVC Messages 2-486SVC-0 2-486SVC-1 2-486SVC-2 2-486SVC-3 2-487SVC-4 2-499SVC-5 2-508
xixCisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Contents
SVC-6 2-509SVC-7 2-525
SVC_BATTERY-SLOT# Messages 2-526SVC_BATTERY-SLOT#-2 2-526SVC_BATTERY-SLOT#-4 2-527SVC_BATTERY-SLOT#-6 2-527
SYSMGR Messages 2-528SYSMGR-2 2-528SYSMGR-3 2-551SYSMGR-4 2-560SYSMGR-5 2-562SYSMGR-6 2-567SYSMGR-7 2-569
SYSTEMHEALTH Messages 2-571SYSTEMHEALTH-2 2-571SYSTEMHEALTH-4 2-575SYSTEMHEALTH-5 2-580SYSTEMHEALTH-6 2-582
TACACS Messages 2-584TACACS-2 2-584TACACS-3 2-584TACACS-5 2-584TACACS-6 2-585
TCAP Messages 2-585TCAP-2 2-585
TLPORT Messages 2-586TLPORT-2 2-586TLPORT-3 2-586TLPORT-4 2-587TLPORT-6 2-587
TPC-SLOT# Messages 2-588TPC-SLOT#-5 2-588
TTYD Messages 2-588TTYD-2 2-589TTYD-3 2-589TTYD-6 2-589
TUNNEL Messages 2-590TUNNEL-3 2-590TUNNEL-4 2-590
xxCisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Contents
TUNNEL-5 2-591TUNNEL-7 2-592
UDLD Messages 2-592UDLD-3 2-592UDLD-4 2-593UDLD-5 2-594
UFDM Messages 2-594UFDM-2 2-594
VDC_MGR Messages 2-595VDC_MGR-2 2-595VDC_MGR-3 2-596VDC_MGR-4 2-596VDC_MGR-6 2-596
VEC-SLOT# Messages 2-597VEC-SLOT#-3 2-597VEC-SLOT#-4 2-597VEC-SLOT#-5 2-597
VEDB_MGR Messages 2-601VEDB_MGR-2 2-601VEDB_MGR-6 2-601
VES-SLOT# Messages 2-602VES-SLOT#-4 2-602VES-SLOT#-5 2-602
VFC Messages 2-603VFC-3 2-603VFC-6 2-603
VIM Messages 2-603VIM-5 2-604
VIM-SLOT# Messages 2-606VIM-SLOT#-5 2-607
VLAN_MGR Messages 2-607VLAN_MGR-2 2-607VLAN_MGR-6 2-608
VMS Messages 2-608VMS-3 2-608VMS-5 2-609
VNI Messages 2-611VNI-2 2-611
xxiCisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Contents
VNI-3 2-611VNI-6 2-612
VPC Messages 2-613VPC-2 2-613VPC-3 2-614VPC-4 2-616VPC-5 2-617VPC-6 2-618
VPM Messages 2-622VPM-2 2-622VPM-3 2-623VPM-4 2-624VPM-6 2-624
VPM-SLOT# Messages 2-626VPM-SLOT#-2 2-627
VRRP-CFG Messages 2-627VRRP-CFG-2 2-627VRRP-CFG-3 2-627VRRP-CFG-5 2-628
VRRP-ENG Messages 2-628VRRP-ENG-2 2-629VRRP-ENG-3 2-629VRRP-ENG-4 2-629VRRP-ENG-5 2-630VRRP-ENG-6 2-631
VSAN Messages 2-631VSAN-2 2-631VSAN-3 2-631VSAN-6 2-632
VSD-SLOT# Messages 2-633VSD-SLOT#-2 2-633
VSHD Messages 2-633VSHD-2 2-633VSHD-3 2-634VSHD-4 2-635VSHD-5 2-635VSHD-7 2-636
WWN Messages 2-636WWN-1 2-636
xxiiCisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Contents
WWN-2 2-637WWN-3 2-638WWN-4 2-639WWN-5 2-640WWN-6 2-640WWN-7 2-642
XBAR Messages 2-642XBAR-2 2-642XBAR-3 2-643XBAR-5 2-643
XBAR_CLIENT Messages 2-647XBAR_CLIENT-2 2-647XBAR_CLIENT-3 2-648
XBAR_CLIENT-SLOT# Messages 2-648XBAR_CLIENT-SLOT#-2 2-648XBAR_CLIENT-SLOT#-3 2-649
XMLMA Messages 2-649XMLMA-2 2-650XMLMA-3 2-650XMLMA-5 2-650XMLMA-6 2-651
XMLSA Messages 2-651XMLSA-2 2-651XMLSA-5 2-652XMLSA-6 2-652
ZONE Messages 2-652ZONE-2 2-652ZONE-3 2-660ZONE-4 2-661ZONE-5 2-664ZONE-6 2-664
xxiiiCisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Contents
xxivCisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Preface
This document lists and describes the system messages for Cisco NX-OS. The system software sends these messages to the console (and, optionally, to a logging server on another system) during operation. Not all messages indicate a problem with your system. Some messages are purely informational, while others might help diagnose problems with links, internal hardware, or the system software.
This document includes system messages for all CiscoNX-OS software releases.
This preface describes the audience, organization, and conventions of this guide. It also provides information on how to obtain related documentation.
AudienceThis guide is for system administrators who are responsible for managing Cisco NX-OS systems.
OrganizationThis guide is organized as follows:
Document ConventionsCommand descriptions use these conventions:
Chapter Title Description
Chapter 1 Introduction to System Messages for the Cisco NX-OS
Describes the structure of system messages and the format of system log files.
Chapter 2 System Messages and Recovery Procedures for Cisco NX-OS
Lists the messages that may appear in log files, and indicates suggested remedies where applicable.
Convention Description
boldface font Commands and keywords are in boldface.
italic font Arguments for which you supply values are in italics.
[ ] Elements in square brackets are optional.
xviiCisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
PrefaceDocument Conventions
Screen examples use these conventions:
This document uses the following conventions:
Note Means reader take note. Notes contain helpful suggestions or references to material not covered in the manual.
Caution Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data.
Release 5.0 Document Title Variables Please avoid applying formats to this file.
[ x | y | z ] Optional alternative keywords are grouped in brackets and separated by vertical bars.
string A nonquoted set of characters. Do not use quotation marks around the string or the string will include the quotation marks.
screen font Terminal sessions and information that the switch displays are in screen font.
boldface screen
font
Information that you must enter is in boldface screen font.
italic screen font Arguments for which you supply values are in italic screen font.
< > Nonprinting characters, such as passwords, are in angle brackets.
[ ] Default responses to system prompts are in square brackets.
!, # An exclamation point (!) or a pound sign (#) at the beginning of a line of code indicates a comment line.
Variable Definition/Document title
NX-OS Release Notes
Doc NX-OS Rel Notes Cisco NX-OS Release Notes, Release 4.1NX-OS Configuration Guides
Doc NX-OS Cfg FP Cisco Nexus 7000 Series NX-OS FabricPath Configuration Guide, Release 5.xDoc NX-OS Cfg Fund Cisco NX-OS Fundamentals Configuration Guide, Release 4.1
Doc NX-OS Cfg Interface Cisco NX-OS Interfaces Configuration Guide, Release 4. 1Doc NX-OS Cfg L2 Cisco NX-OS Layer 2 Switching Configuration Guide, Release 4.1
Doc NX-OS Cfg MPLS Cisco Nexus 7000 Series NX-OS Multiprotocol Label Switching Configuration Guide, Release 5.x
Doc NX-OS Cfg Multicast Cisco NX-OS Multicast Routing Configuration Guide, Release 4.1
Doc NX-OS Cfg OTV Cisco Nexus 7000 Series NX-OS OTV Configuration Guide, Release 5.x
xviiiCisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
PrefaceDocument Conventions
Doc NX-OS Cfg Qos Cisco NX-OS Quality of Service Configuration Guide, Release 4.1
Doc NX-OS Cfg Security Cisco NX-OS Security Configuration Guide, Release 4.1Doc NX-OS Cfg Sys Mgmt Cisco NX-OS System Management Configuration Guide, Release 4.1
Doc NX-OS Cfg Unicast Cisco NX-OS Unicast Routing Configuration Guide, Release 4.1Doc NX-OS Cfg VDC Cisco Nexus 7000 Series NX-OS Virtual Device Context Configuration Guide,
Release 5.x
Doc NX-OS Get Started VDC Cisco NX-OS Getting Started with Virtual Device Contexts, Release 4.1 Doc NX-OS HA Cisco NX-OS High Availability and Redundancy Guide, Release 4.1
Doc NX-OS License Cisco NX-OS Licensing Guide, Release 4.1Doc NX-OS MIB Cisco NX-OS MIB Quick Reference
Doc NX-OS Quickstart OTV Cisco Nexus 7000 Series OTV Quick Start GuideDoc NX-OS SW Up_Downgrade Cisco NX-OS Software Upgrade and Downgrade Guide, Release 4.1
Doc NX-OS Sys Message Cisco NX-OS System Messages ReferenceDoc NX-OS XML Mgmt Interface Cisco NX-OS XML Management Interface User Guide, Release 4.1
NX-OS Command References
Doc NX-OS CR FP Cisco Nexus 7000 Series NX-OS FabricPath Command Reference, Release 5.x
Doc NX-OS CR Fund Cisco NX-OS Fundamentals Command Reference, Release 4.1Doc NX-OS CR Interface Cisco NX-OS Interfaces Command Reference, Release 4.1
Doc NX-OS CR L2 Cisco NX-OS Layer 2 Switching Command Reference, Release 4.1Doc NX-OS CR Master IX Cisco NX-OS Command Reference Master Index, Release 4.1
Doc NX-OS CR Mcast Cisco NX-OS Multicast Routing Command Reference, Release 4.1Doc NX-OS CR MPLS Cisco Nexus 7000 Series NX-OS Multiprotocol Label Switching Command
Reference, Release 5.x
Doc NX-OS CR OTV Cisco Nexus 7000 Series NX-OS OTV Command Reference, Release 5.xDoc NX-OS CR QoS Cisco NX-OS Quality of Service Command Reference, Release 4.1
Doc NX-OS CR Security Cisco NX-OS Security Command Reference, Release 4.1Doc NX-OS CR System Mgmt Cisco NX-OS System Management Command Reference, Release 4.1
Doc NX-OS CR Unicast Cisco NX-OS Unicast Routing Command Reference, Release 4.1Doc NX-OS CR VDC Cisco NX-OS Virtual Device Context Command Reference, Release 4.1
Other NX-OS Software Document
Doc NX-OS Troubleshooting Cisco NX-OS Troubleshooting Guide, Release 4.1
Variable Definition/Document title
Variable Document Title
DCNM Release Notes
Doc DCNM Release Notes Cisco DCNM Release Notes, Release 4.1
DCNM Documents
xixCisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
PrefaceDocument Conventions
Obtaining Documentation and Submitting a Service RequestFor information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.
Doc DCNM Cfg FP Cisco DCNM FabricPath Configuration Guide, Release 5.x
Doc DCNM Cfg Fund Cisco DCNM Fundamentals Configuration Guide, Release 4.1Doc DCNM Cfg Get Start VDC Cisco DCNM Getting Started with Virtual Device Contexts, Release 4.1
Doc DCNM Cfg Interfaces Cisco DCNM Interfaces Configuration Guide, Release 4.1 Doc DCNM Cfg L2 Cisco DCNM Layer 2 Switching Configuration Guide, Release 4.1
Doc DCNM Cfg License Cisco DCNM Licensing Guide, Release 4.1Doc DCNM Cfg Security Cisco DCNM Security Configuration Guide, Release 4.1
Doc DCNM Cfg System Management Cisco DCNM System Management Configuration Guide, Release 5.xDoc DCNM Cfg Unicast Cisco DCNM Unicast Routing Configuration Guide, Release 4.1
Doc DCNM Cfg VDC Cisco DCNM Virtual Device Context Configuration Guide, Release 4.1Doc DCNM Install Cisco DCNM Installation and Licensing Guide, Release 5.x
Doc DCNM Web API Cisco DCNM Web Services API Guide, Release 4.1
Variable Document Title
Variable Document Title
Nexus 7000 Hardware Documents
Doc Nexus 7 CMP Cisco Nexus 7000 Series Connectivity Management Processor Configuration Guide
Doc Nexus 7 FPGA/EPLD Upgr RNs Cisco Nexus 7000 Series FPGA/EPLD Upgrade Release Notes, Release 4.1Doc Nexus 7 HW Install Cisco Nexus 7000 Series Hardware Installation and Reference Guide
Doc Nexus 7 Regulatory Cisco Nexus 7000 Series Regulatory Compliance and Safety InformationDoc Nexus 7 Site Prep Cisco Nexus 7000 Series Site Preparation Guide
xxCisco NX-OS System Messages Reference
OL-23717-01
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
-
Send document comments to nexus7k - feedback -doc@c i sco .com
OL-23717-01
C H A P T E R 1
Introduction to System Messages for the Cisco NX-OS
This chapter describes system messages, as defined by the syslog protocol (RFC 3164). It describes how to understand the syslog message format and how to capture system messages for review.
This chapter contains the following sections:
• System Log Message Format, page 1-1
• Capturing System Messages and History, page 1-5
System Log Message FormatSystem log messages begin with a percent sign (%) and are displayed in the following formats:
• Syslog Format On a Resident Switch, page 1-1
• Syslog Format On a Remote-Logging Server, page 1-3
Syslog Format On a Resident SwitchThe format for a resident syslog is:month dd hh:mm:ss switchname facility-severity-MNEMONIC descriptionor month dd hh:mm:ss switchname facility-SLOTnumber-severity-MNEMONIC descriptionor month dd hh:mm:ss switchname facility-STANDBY-severity-MNEMONIC description
For example:Nov 1 14:07:58 excal-113 %MODULE-5-MOD_OK: Module 1 is onlineNov 1 14:07:58 excal-113 %PORT-3-IF_UNSUPPORTED_TRANSCEIVER: Transceiver for interface fc1/13 is not supported.
Table 1-1 System Log Message Format Description
Element Description
month dd The date and month of the error or event
hh:mm:ss The time of the error or event
1-1Cisco NX-OS System Messages Reference
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Chapter 1 Introduction to System Messages for the Cisco NX-OSSystem Log Message Format
FACILITY is a code consisting of two or more uppercase letters that indicate the facility to which the system message refers. A facility is a hardware device, a protocol, a feature, or a module of the system software.
System message SEVERITY codes range from 0 to 7 and reflect the severity of the condition. The lower the number, the more serious the situation. Table 1-2 lists the severity levels.
MNEMONIC is a code that uniquely identifies the system message.
Message-text is a text string that describes the condition. This portion of the message might contain detailed information about the event, including terminal port numbers, network addresses, or addresses that correspond to locations in the system memory address space. Because the information in these variable fields changes from message to message, it is represented here by short strings enclosed in square brackets ([ ]). A decimal number, for example, is represented as [dec].
Table 1-3 lists the representations of variable fields and the type of information in the fields.
switchname The name of the switch
facility The facility of the error or event (daemon, kernel, VSHD, or other facility)
severity Single-digit code from 0 to 7 that indicates the severity of the message
MNEMONIC Text string that uniquely describes the system message
%$VDC #%$ An optional virtual device context (VDC) ID that appears in the description for messages requiring VDC IDs
%$VRF #%$ An optional virtual routing and forwarding (VRF) ID that appears in the description for messages requiring VRF IDs
description Text string containing detailed information about the event being reported
Table 1-1 System Log Message Format Description (continued)
Element Description
Table 1-2 System Message Severity Levels
Level Description
0 – emergency System unusable
1 – alert Immediate action needed
2 – critical Critical condition
3 – error Error condition
4 – warning Warning condition
5 – notification Normal but significant condition
6 – informational Informational message only
7 – debugging Appears during debugging only
Table 1-3 Representation of Variable Fields in System Messages
Representation Type of Information
[dec] Decimal number
[hex] Hexadecimal number
1-2Cisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Chapter 1 Introduction to System Messages for the Cisco NX-OSSystem Log Message Format
The following example system message shows how the variable field might be used:%MODULE-5-MOD_MINORSWFAIL: Module [dec] reported a failure in service [chars]
In this example,
Facility code =MODULE (indicating that it is a module-specific error)
Severity =5 (notification)
Alarm/event code= MOD_MINORSWFAIL
Description of the problem= Module [dec] reported a failure in service [chars]
[dec] is the module slot number associated with this message.
[chars] is the service name that experienced this failure.
System log messages begin with a percent sign (%) and are displayed in the following format (see Table 1-4).
Syslog Format On a Remote-Logging ServerThe syslog format on a remote-logging server is:month dd hh:mm:ss IP-addr-switch : year month day hh:mm:ss Timezone: facility-severity-MNEMONIC descriptionor month dd hh:mm:ss IP-addr-switch : year month day hh:mm:ssTimezone: facility-SLOTnumber-severity-MNEMONIC descriptionor month dd hh:mm:ss IP-addr-switch : year month day hh:mm:ss Timezone: facility-STANDBY-severity-MNEMONIC description
For example:sep 21 11:09:50 172.22.22.45 : 2005 Sep 04 18:18:22 UTC: %AUTHPRIV-3-SYSTEM_MSG: ttyS1:togetattr: Input/output error - getty[28224]switch resident syslog 2005 Sep 4 18:18:22 switch %AUTHPRIV-3-SYSTEM_MSG: ttyS1:togetattr: Input/output error - getty[28224]time on switch : 2005 Sep 4 18:18:22 time on Loggng Server : Sep 21 11:09:50 fc1/13 is not supported.
[char] Single character
[chars] Character string
Table 1-3 Representation of Variable Fields in System Messages
Representation Type of Information
Table 1-4 System Log Message Format Description
Element Description
month dd The date and month of the error or event
hh:mm:ss The time of the error or event
IP-addr-switch The IP address of the switch
facility The facility of the error or event (daemon, kernel, VSHD, or other facility)
severity Single-digit code from 0 to 3 that indicates the severity of the message
MNEMONIC Text string that uniquely describes the system message
1-3Cisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Chapter 1 Introduction to System Messages for the Cisco NX-OSSystem Log Message Format
FACILITY is a code consisting of two or more uppercase letters that indicate the facility to which the system message refers. A facility is a hardware device, a protocol, a feature, or a module of the system software.
System message SEVERITY codes range from 0 to 3 and reflect the severity of the condition. The lower the number, the more serious the situation. Table 1-5 lists the severity levels.
MNEMONIC is a code that uniquely identifies the system message.
Message-text is a text string that describes the condition. This portion of the message might contain detailed information about the event, including terminal port numbers, network addresses, or addresses that correspond to locations in the system memory address space. Because the information in these variable fields changes from message to message, it is represented here by short strings enclosed in square brackets ([ ]). A decimal number, for example, is represented as [dec].
Table 1-6 lists the representations of variable fields and the type of information in the fields.
The following example system message shows how the variable field might be used:%AUTHPRIV-3-SYSTEM_MSG: AUTHPRIV [dec] reported a failure in service [chars]
In this example,
Facility code =AUTHPRIV (indicating that it is a authpriv-specific error)
Severity =3 (notification)
%$VDC #%$ An optional virtual device context (VDC) ID that appears in the description for messages requiring VDC IDs
%$VRF #%$ An optional virtual routing and forwarding (VRF) ID that appears in the description for messages requiring VRF IDs
description Text string containing detailed information about the event being reported
Table 1-4 System Log Message Format Description (continued)
Element Description
Table 1-5 System Log Message Format description
Level Description
0 – emergency System unusable
1 – alert Immediate action needed
2 – critical Critical condition
3 – notification Normal but significant condition
Table 1-6 Representation of Variable Fields in System Messages
Representation Type of Information
[dec] Decimal number
[hex] Hexadecimal number
[char] Single character
[chars] Character string
1-4Cisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Chapter 1 Introduction to System Messages for the Cisco NX-OSCapturing System Messages and History
Alarm/event code= SYSTEM_MSG
Description of the problem= Authpriv [dec] reported a failure in service [chars]
[dec] is the module slot number associated with this message.
[chars] is the service name that experienced this failure.
Capturing System Messages and HistoryThe system messages are displayed instantly on the console, by default, or are redirected to an internal log file, or a syslog server. System message severity levels correspond to the keywords assigned by the logging global configuration commands. These keywords define where and at what level these messages appear (see to the Cisco NX-OS System Management Configuration Guide). Only system messages that correspond to the configured logging level or higher severity messages are logged. As an example, if you set the logging level to 3 (error), then you get error, critical, alerts, and emergency system messages, but you do not get warning, notification, informational, or debugging system messages.
For complete information about handling system messages, see the Cisco NX-OS System Management Configuration Guide, Release 4.1.
Saving the System Messages LogThe logging logfile global configuration command enables copying of system messages to an internal log file and optionally sets the size of the file. To display the messages that are logged in the file, use the show logging EXEC command. The first message displayed is the oldest message in the buffer. To clear the current contents of the buffer, use the clear debug-logfile command.
Logging System Messages to a Syslog ServerThe logging host-name command identifies a syslog server host to receive logging messages. The host-name argument is the name or Internet address of the host. By issuing this command more than once, you build a list of syslog servers that receive logging messages. The no logging host-name command deletes the syslog server with the specified address from the list of syslog servers.
1-5Cisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Chapter 1 Introduction to System Messages for the Cisco NX-OSCapturing System Messages and History
1-6Cisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
OL-23717-01
C H A P T E R 2
System Messages and Recovery Procedures for Cisco NX-OS
This chapter includes the system messages for the Cisco Nexus 7000, Cisco Nexus 5000, and Cisco Nexus 1000V families of products. The messages are listed in alphabetical order by the system facility that produces them. Within each system facility section, messages are listed alphabetically by severity and mnemonics. Each error message is followed by an explanation and a recommended action.
AAA MessagesThis section contains the AAA messages.
AAA-1
Error Message AAA-1-AAA_SESSION_LIMIT_REJECT: aaa request rejected as maximum aaa sessions are in progress
Explanation An AAA request has been rejected because the system has detected that the limit for the maximum concurrent AAA sessions has been exceeded.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
AAA-2
Error Message AAA-2-AAA_NVRAM_UPGRADE_FAILURE: upgrading of accounting log failed. [chars]
Explanation The system has detected that the accounting log upgrade has failed.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
2-1Cisco NX-OS System Messages Reference
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Chapter 2 System Messages and Recovery Procedures for Cisco NX-OSAAM Messages
Error Message AAA-2-AAA_PROGRAM_EXIT: aaa daemon exiting: [chars]
Explanation The system has detected that the AAA daemon has exited.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
AAA-3
Error Message AAA-3-AAA_NVRAMFAILURE: nvram failure
Explanation The system has detected that because the NVRAM cannot be read/written to, the accounting log cannot be stored in NVRAM.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
AAA-6
Error Message AAA-6-AAA_ACCOUNTING_MESSAGE: [chars]
Explanation This message indicates that this is an accounting message.
Recommended Action No action is required.
AAM MessagesThis section contains the AAM messages.
AAM-2
Error Message AAM-2-ELS_FC2_GL_SINDEX_LOOKUP_FAILED: Failed to lookup global port index for interface [[chars]]
Explanation Failed to lookup global port index for interface [chars].
Recommended Action No action is required.
2-2Cisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Chapter 2 System Messages and Recovery Procedures for Cisco NX-OSACL Messages
AAM-3
Error Message AAM-3-ALLOC_FAILED: Failed in File:[chars] Line:[dec] for type [dec] size [dec]
Explanation AAM process could not allocate heap memory in File:[chars], at line:[dec], for memory-type:[dec] of Size:[dec].
Recommended Action No action is required.
Error Message AAM-3-ASSERTION_FAILED: Failed in File:[chars] Line:[dec]
Explanation AAM Process assertion failed in File:[chars], at line:[dec].
Recommended Action No action is required.
ACL MessagesThis section contains the ACL messages.
ACL-2
Error Message ACL-2-ACL_HA_FAILURE: Failed to do high availability operation: [chars].
Explanation The system has failed to do a high availability operation. [chars] is the reason.
Recommended Action No action is required.
Error Message ACL-2-ACL_INIT_FAILED: Initialization failed for ACL: [chars], reason: [hex].
Explanation Initialization failed for ACL due to [chars], reason: [hex].
Recommended Action No action is required.
Error Message ACL-2-ACL_LINECARD_STATUS: Status from linecard: [dec], for module: [chars](ID: [dec]), status : [dec], error_id: [hex], catastrophic: [chars], restart count: [dec].
Explanation This message indicates that this message is a status from the line card [dec], for module: [chars](ID: [dec]), status : [dec], error_id: [hex], catastrophic: [chars], restart count: [dec].
Recommended Action No action is required.
2-3Cisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Chapter 2 System Messages and Recovery Procedures for Cisco NX-OSACL Messages
Error Message ACL-2-ACL_MTS_FAILURE: Failed to do MTS operation: [chars].
Explanation The system has failed to do an MTS operation. [chars] is the reason.
Recommended Action No action is required.
Error Message ACL-2-ACL_MTS_REGISTRATION_FAILED: MTS options setting to [hex] failed for opCode: [dec].
Explanation The MTS options setting to [hex] failed for opCode: [dec].
Recommended Action No action is required.
Error Message ACL-2-ACL_PENDING_MSG_ARR_FULL: ACL Upgrade Pending Messages Array is Full with [dec] messages. Failing the MTS message with Opc: [dec], RR_TOKEN: [hex]
Explanation This message indicates that the ACL upgrade pending messages array is full with [dec] messages. Failing the MTS message with Opc: [dec], RR_TOKEN: [hex].
Recommended Action No action is required.
Error Message ACL-2-ACL_PSS_FAILURE: Failed to do PSS operation: [chars], reason: [hex].
Explanation The system has failed to do a PSS operation [chars]. [hex] is the reason.
Recommended Action No action is required.
Error Message ACL-2-ACL_PSS_VER_FAIL: PSS file [chars] has version [dec].[dec].[dec], expected version [dec].[dec].[dec].
Explanation There was a mismatch in the PSS version. [chars] indicates the PSS service, [dec].[dec].[dec] its current version number and [dec].[dec].[dec] is the expected version.
Recommended Action No action is required.
Error Message ACL-2-ACL_RUNTIME_FAILURE: [chars] [dec], Error: [hex]
Explanation The system detects than an ACL runtime failure has occurred as [chars] [dec], reason: [hex].
Recommended Action No action is required.
Error Message ACL-2-ACL_TCAM_FAILURE: Failed to do TCAM operation: [chars].
Explanation The system has failed to do a TCAM operation. [chars] is the reason.
Recommended Action No action is required.
2-4Cisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Chapter 2 System Messages and Recovery Procedures for Cisco NX-OSACL Messages
ACL-4
Error Message ACL-4-ACL_WARNING: [chars] [dec]
Explanation ACL warning messages are reported as [chars] [dec].
Recommended Action No action is required.
ACL-5
Error Message ACL-5-ACL_ADJ_SHARING_STATUS: Successfully completed [chars] on Generation 2 linecards.
Explanation Successfully completed the command \[chars]\ on Generation 2 line cards.
Recommended Action No action is required.
ACL-6
Error Message ACL-6-ACL_DIAG_EVENT_STATUS: [chars] [hex].
Explanation ACL system health management event status is reported as [chars] [hex].
Recommended Action No action is required.
Error Message ACL-6-ACL_E_PORT_EVENT_STATUS: [chars] [chars].
Explanation ACL E port event status is reported as [chars] [chars].
Recommended Action No action is required.
Error Message ACL-6-ACL_FCC_EVENT_STATUS: [chars] [chars].
Explanation ACL FCC event status is reported as [chars] [chars].
Recommended Action No action is required.
Error Message ACL-6-ACL_LINECARD_EVENT_STATUS: [chars] [hex].
Explanation ACL line card event status is reported as [chars] [dec].
Recommended Action No action is required.
2-5Cisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Chapter 2 System Messages and Recovery Procedures for Cisco NX-OSACL Messages
Error Message ACL-6-ACL_MCAST_EVENT_STATUS: [chars] [chars].
Explanation ACL multicast event status is reported as [chars] [chars].
Recommended Action No action is required.
Error Message ACL-6-ACL_NX_PORT_EVENT_STATUS: [chars] [chars].
Explanation ACL Nx Port event status is reported as [chars] [chars].
Recommended Action No action is required.
Error Message ACL-6-ACL_PORT_MODE_EVENT_STATUS: [chars] [chars].
Explanation ACL portmode event status is reported as [chars] [chars].
Recommended Action No action is required.
Error Message ACL-6-ACL_RUNTIME_STATUS: [chars] [dec]
Explanation ACL runtime status is reported as [chars] [dec].
Recommended Action No action is required.
Error Message ACL-6-ACL_SPAN_DEST_CONFIG_STATUS: [chars] [chars].
Explanation ACL SPAN destination config event status is reported as [chars] [chars].
Recommended Action No action is required.
Error Message ACL-6-ACL_SPAN_SRC_CONFIG_STATUS: [chars] [chars].
Explanation ACL SPAN source configuration event status is reported as [chars] [chars].
Recommended Action No action is required.
Error Message ACL-6-ACL_STATUS: ACL Status: [chars].
Explanation ACL status is reported as [chars].
Recommended Action No action is required.
Error Message ACL-6-ACL_UPDATE_SSRAM_QOS_EVENT_STATUS: [chars] [chars].
Explanation ACL update SSRAM for QoS event status is reported as [chars] [chars].
Recommended Action No action is required.
2-6Cisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Chapter 2 System Messages and Recovery Procedures for Cisco NX-OSACLLOG Messages
ACLLOG MessagesThis section contains the ACLLOG messages.
ACLLOG-4
Error Message ACLLOG-4-ACLLOG_MAXFLOW_REACHED: [chars]
Explanation The maximum flow has been reached in current interval: [chars].
Recommended Action No action is required.
Error Message ACLLOG-4-ACLLOG_THRESHOLD: [chars]
Explanation Threshold Reached for Flow: [chars].
Recommended Action No action is required.
ACLLOG-6
Error Message ACLLOG-6-ACLLOG_FLOW_INTERVAL: [chars]
Explanation Flow informationin current alert interval: [chars].
Recommended Action No action is required.
Error Message ACLLOG-6-ACLLOG_NEW_FLOW: [chars]
Explanation New Acllog Flow: [chars].
Recommended Action No action is required.
ACLMGR MessagesThis section contains the ACLMGR messages.
ACLMGR-2
Error Message ACLMGR-2-ACLMGR_COMMIT_FAIL: Commit failed: client %llX, [chars]
Explanation The PPF commit failed.
Recommended Action No action is required.
2-7Cisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Chapter 2 System Messages and Recovery Procedures for Cisco NX-OSACLMGR Messages
Error Message ACLMGR-2-ACLMGR_DB_LOCK_MSG: ACL database message, reason: [chars], session 0x%llx, type: [chars]
Explanation ACL PPF database lock acquire/release related message.
Recommended Action No action is required.
Error Message ACLMGR-2-ACLMGR_NO_ERRDISABLED: [chars] event on interface [chars] ([hex]) allowed to succeed in spite of access-list failure
Explanation Although an access-list operation failed during a port event, the port event still finished successfully because errordisable is disallowed.
Recommended Action No action is required.
Error Message ACLMGR-2-EXITING: Exit reason: [chars]
Explanation The ACLMGR service process has exited due to [char]. The process has probably been restarted automatically.
Recommended Action No action is required.
Error Message ACLMGR-2-INITFAIL: ACLMGR Service Init failed: [chars]
Explanation ACLMGR Service initialization failed. [chars] explains the reason for the failure.
Recommended Action No action is required.
Error Message ACLMGR-2-MALLOC_ERROR: Size [dec] bytes
Explanation The ACLMGR service could not allocate enough memory.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message ACLMGR-2-PSS_ERROR: [chars]: PSS ret. val=[dec]
Explanation The ACLMGR service encountered an error while operating on a persistent storage database.
Recommended Action No action is required.
2-8Cisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Chapter 2 System Messages and Recovery Procedures for Cisco NX-OSACLMGR Messages
ACLMGR-3
Error Message ACLMGR-3-ACLMGR_ACL_ON_FAB_INACTIVE: ACL on FEX fabric interface not activated
Explanation ACL applied to a FEX fabric port or port channel is not activated.
Recommended Action No action is required.
Error Message ACLMGR-3-ACLMGR_ACL_OVER_FAB_CHANNEL: ACL on FEX fabric port-channel bound interface not activated
Explanation ACL applied to a FEX interface is not activated if the interface is bound to a FEX-fabric port channel.
Recommended Action No action is required.
Error Message ACLMGR-3-ACLMGR_PPF_ERROR: PPF error: [chars]
Explanation The PPF generated an error.
Recommended Action No action is required.
Error Message ACLMGR-3-ACLMGR_PSS_CORRUPTED: [chars] PSS found corrupted
Explanation The ACLMGR service has detected a corrupted file in its persistent information databases The database would be recreated.
Recommended Action No action is required.
Error Message ACLMGR-3-ACLMGR_STAT_CONSOLIDATION_FAILURE: ACL statistic parsing or consolidation failed
Explanation A statistic update failed during the parsing or consolidation step; statistics may have been lost.
Recommended Action No action is required.
Error Message ACLMGR-3-ACLMGR_VACL_REDIRECTION_DISABLED_REMOVAL: VACL redirection to interface [chars] ([hex]) disabled: the port has been removed
Explanation A VACL redirection to the port has been deactivated because the port has been removed.
Recommended Action No action is required.
2-9Cisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Chapter 2 System Messages and Recovery Procedures for Cisco NX-OSACLMGR Messages
Error Message ACLMGR-3-ACLMGR_VERIFY_FAIL: ACL Policy configuration error : client %llX, [chars]
Explanation The PPF Verify failed.
Recommended Action No action is required.
Error Message ACLMGR-3-ACLMGR_VERIFY_FAIL: Verify failed: client %llX, [chars]
Explanation The PPF Verify failed.
Recommended Action No action is required.
Error Message ACLMGR-3-MTSERROR: [chars]
Explanation ACLMGR Service encountered an MTS error. [chars] specifies the context where the error occurred.
Recommended Action No action is required.
ACLMGR-4
Error Message ACLMGR-4-ACLMGR_PPF_WARNING: PPF warning: [chars]
Explanation The PPF generated warning.
Recommended Action No action is required.
Error Message ACLMGR-4-ACLMGR_VACL_REDIRECTION_DISABLED_PCM: VACL redirection to interface [chars] ([hex]) disabled: the port became a portchannel member
Explanation A VACL redirection to the port has been temporarily deactivated because it is now a member in a port channel.
Recommended Action No action is required.
Error Message ACLMGR-4-PSS_VERSION_MISMATCH: PSS [dec] Code [dec]
Explanation There was a version mismatch between the ACLMGR service and one of its persistent storage databases. The persistent information has been translated to the new format.
Recommended Action No action is required.
2-10Cisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Chapter 2 System Messages and Recovery Procedures for Cisco NX-OSACLMGR Messages
ACLMGR-6
Error Message ACLMGR-6-ACLMGR_PPF_NOTIF: PPF notification: [chars]
Explanation The PPF generated a notification.
Recommended Action No action is required.
Error Message ACLMGR-6-BECAME_ACTIVE: Became ACTIVE from standby mode
Explanation The ACLMGR service on the standby supervisor became active and it is ready to serve client requests.
Recommended Action No action is required.
Error Message ACLMGR-6-BECAME_STDBY: Became STANDBY from active mode
Explanation The ACLMGR service became standby from active mode.
Recommended Action No action is required.
Error Message ACLMGR-6-FAILED_TO_SEND_HEARTBEAT: Failed to send heartbeat to system manager: Reason=[chars]
Explanation The ACLMGR service was unable to send heartbeats to the system manager.
Recommended Action No action is required.
Error Message ACLMGR-6-SERVICE_UP: Initialized [chars]
Explanation The ACLMGR service is up and ready The service was initialized in [char] mode.
Recommended Action No action is required.
Error Message ACLMGR-6-SRVEXIT: ACLMGR Service shutting down gracefully
Explanation ACLMGR Service is shutting down gracefully.
Recommended Action No action is required.
Error Message ACLMGR-6-SWITCHOVER: Switching Over to other Sup.
Explanation The ACLMGR service has successfully switched over to the standby supervisor module.
Recommended Action No action is required.
2-11Cisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Chapter 2 System Messages and Recovery Procedures for Cisco NX-OSACLQOS-SLOT# Messages
ACLQOS-SLOT# MessagesThis section contains the ACLQOS-SLOT# messages.
ACLQOS-SLOT#-2
Error Message ACLQOS-SLOT#-2-ACLQOS_FAILED: ACLQOS failure: [chars]
Explanation ACLQOS operation failed in the aclqos client.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message ACLQOS-SLOT#-2-ACLQOS_INBAND_INTERFACE_FAILURE: Inband interface lif lookup failed ([chars])
Explanation Inband interface lif lookup failed.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message ACLQOS-SLOT#-2-ACLQOS_MALLOC_FAILED: Memory allocation failed. [chars]
Explanation Memory allocation failed. This is a critical failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message ACLQOS-SLOT#-2-ACLQOS_OOTR: Tcam resource exhausted: [chars]
Explanation TCAM resources to program acls exhausted.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message ACLQOS-SLOT#-2-PPF_FAILED: Database failure: [chars]
Explanation Database operation failed in the aclqos client.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
2-12Cisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Chapter 2 System Messages and Recovery Procedures for Cisco NX-OSACLQOS-SLOT# Messages
ACLQOS-SLOT#-3
Error Message ACLQOS-SLOT#-3-ACLQOS_CC_INVALID: Invalid Congestion Control parameters
Explanation Invalid Congestion Control parameters.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message ACLQOS-SLOT#-3-ACLQOS_PAUSE_INVALID: Invalid Pause parameters
Explanation Invalid Pause parameters.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message ACLQOS-SLOT#-3-ACLQOS_QUEUING_ERROR: ACL/QoS queuing error: [chars]
Explanation Internal error in ACL/QoS queing configuration.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
ACLQOS-SLOT#-4
Error Message ACLQOS-SLOT#-4-ACLQOS_ATOMIC_ERR: [chars]
Explanation TCAM will be overused, turn off atomic update.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message ACLQOS-SLOT#-4-ACLQOS_MATCH_ALL_MERGE_UPDATE: Warning (match_all merging): [chars]
Explanation Warning (match_all merging).
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
2-13Cisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Chapter 2 System Messages and Recovery Procedures for Cisco NX-OSACLQOS-SLOT# Messages
Error Message ACLQOS-SLOT#-4-ACLQOS_OVER_THRESHOLD: Tcam [dec] Bank [dec]'s usage has reached its threshold
Explanation TCAM is almost full.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message ACLQOS-SLOT#-4-ACLQOS_QUEUING_COS2Q_INVALID: ACL/QoS invalid queuing policy because of cos map change: [chars] queue [chars], interface [chars]
Explanation Attemped to configure an invalid queuing policy.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message ACLQOS-SLOT#-4-ACLQOS_QUEUING_INVALID: ACL/QoS invalid queuing policy: [chars]
Explanation Attemped to configure an invalid queuing policy.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message ACLQOS-SLOT#-4-ACLQOS_UNDER_THRESHOLD: Tcam [dec] Bank [dec]'s usage is below the threshold now
Explanation TCAM's usage is below the threshold.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message ACLQOS-SLOT#-4-ACLQOS_WARNING: ACLQOS Warning: [chars]
Explanation ACLQOS Warnings.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
ACLQOS-SLOT#-5
Error Message ACLQOS-SLOT#-5-ACLQOS_DISRUPTIVE_IPv6_UPDATE: Disruptive update of IPv6 compression entries
Explanation Disruptive IPv6 compression entries update.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
2-14Cisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Chapter 2 System Messages and Recovery Procedures for Cisco NX-OSACLTCAM Messages
Error Message ACLQOS-SLOT#-5-ACLQOS_NON_ATOMIC: Non atomic ACL/QoS policy update done for [chars]
Explanation Nonatomic ACL/QoS policy update was done.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
ACLTCAM MessagesThis section contains the ACLTCAM messages.
ACLTCAM-2
Error Message ACLTCAM-2-ACL_TCAM_ADJ_EXHAUSTED: ACLTCAM failed to program route for VSAN: [dec], SID: [chars] DID: [chars], error: [chars].
Explanation ACLTCAM process experienced a failure while programming route for VSAN [dec] SID [chars] DID [chars] due to resource exhaustion. [chars] is the error code.
Recommended Action No action is required.
Error Message ACLTCAM-2-ACL_TCAM_ALMOST_FULL: TCAM close to FULL. [chars] TCAM Usage ([dec]/[dec]) exceeded [dec]% fwd-eng: [dec], [chars]
Explanation [chars] TCAM usage [dec]/[dec] exceeded [dec] percent on fwd-engine [dec], [chars].
Recommended Action No action is required.
Error Message ACLTCAM-2-ACL_TCAM_CONFIG_READ_FROM_DRIVER_FAILED: [chars] [dec], Error: [hex].
Explanation The system is unable to read the configuration from the forwarding engine ASIC driver. [chars] [dec], Error: 0x[hex].
Recommended Action No action is required.
Error Message ACLTCAM-2-ACL_TCAM_CONFIG_WRITE_TO_DRIVER_FAILED: [chars] [dec], Error: [hex].
Explanation The system is unable to write the configuration to the forwarding engine ASIC driver. [chars] [dec], Error: 0x[hex].
Recommended Action No action is required.
2-15Cisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Chapter 2 System Messages and Recovery Procedures for Cisco NX-OSACLTCAM Messages
Error Message ACLTCAM-2-ACL_TCAM_INCONSISTENT_DATABASE: Database found inconsistent.
Explanation Database found inconsistent.
Recommended Action No action is required.
Error Message ACLTCAM-2-ACL_TCAM_INCONSISTENT_TCAM_CONTENTS: TCAM contents found inconsistent.
Explanation TCAM contents are found inconsistent.
Recommended Action No action is required.
Error Message ACLTCAM-2-ACL_TCAM_INIT_FAILED: Initialization failed for forwarding engine ASIC: [dec], [chars] TCAM.
Explanation Initialization failed for the forwarding engine ASIC [dec], in [chars] TCAM.
Recommended Action No action is required.
Error Message ACLTCAM-2-ACL_TCAM_INIT_REGIONS_FAILED: Initialization failed for forwarding engine ASIC: [dec], [chars] TCAM, [chars] Region.
Explanation Initialization of regions failed for the forwarding engine ASIC [dec], in [chars] TCAM, for [chars] Region.
Recommended Action No action is required.
Error Message ACLTCAM-2-ACL_TCAM_MALLOC_FAILURE: Memory allocation failed for size [dec].
Explanation Memory allocation is failed for size [dec] bytes.
Recommended Action Restart the process.
Error Message ACLTCAM-2-ACL_TCAM_MTS_FAILURE: MTS operation failed: [chars].
Explanation MTS operation failed. [chars] is the reason.
Recommended Action No action is required.
Error Message ACLTCAM-2-ACL_TCAM_MTS_REGISTRATION_FAILED: MTS registration failed for opCode: [dec].
Explanation MTS registration failed for opCode: [dec].
Recommended Action No action is required.
2-16Cisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Chapter 2 System Messages and Recovery Procedures for Cisco NX-OSACLTCAM Messages
Error Message ACLTCAM-2-ACL_TCAM_NO_ROUTE: ACLTCAM failed to get route for VSAN: [dec], Rewrite: [chars] DID: [chars] DID MASK: [chars], error: [hex].
Explanation ACLTCAM process experienced a failure while getting route for VSAN [dec] Rewrite [chars] DID [chars] DID Mask [chars]. [hex] is the error code.
Recommended Action No action is required.
Error Message ACLTCAM-2-ACL_TCAM_NO_TCAM_LEFT: ACLTCAM resource exhausted for interface : [chars]
Explanation ACLTCAM hardware resource is completely used.
Recommended Action No action is required.
Error Message ACLTCAM-2-ACL_TCAM_PHY_TCAM_READ_FAILED: [chars] read from hardware TCAM failed(ASIC: [dec], [chars] TCAM, Address: [dec], Num Entries: [dec], Error: [chars]).
Explanation [chars] read from hardware TCAM failed(ASIC: [dec], [chars] TCAM, Address: [dec], Num Entries: [dec] Error: [chars]).
Recommended Action No action is required.
Error Message ACLTCAM-2-ACL_TCAM_PHY_TCAM_READ_INVALID: Invalid([chars], value: [dec]) TCAM entry read from hardware TCAM (FWD-Engine: [dec], [chars] TCAM, Address: [dec]), Ignoring this entry.
Explanation Invalid([chars], value: [dec]) TCAM entry from hardware TCAM(FWD-Engine: [dec], [chars] TCAM, Address: [dec]) Ignoring this entry.
Recommended Action No action is required.
Error Message ACLTCAM-2-ACL_TCAM_PHY_TCAM_WRITE_FAILED: [chars] write to hardware TCAM failed(ASIC: [dec], [chars] TCAM, Address: [dec], Num Entries: [dec], Error: [chars]).
Explanation [chars] write to hardware TCAM failed(ASIC: [dec], [chars] TCAM, Address: [dec], Num Entries: [dec] Error: [chars]).
Recommended Action No action is required.
Error Message ACLTCAM-2-ACL_TCAM_PSS_FAILURE: Failed to do PSS operation: [chars], reason: [hex].
Explanation The system has failed to do a PSS operation [chars]. [hex] is the reason.
Recommended Action No action is required.
2-17Cisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Chapter 2 System Messages and Recovery Procedures for Cisco NX-OSACLTCAM Messages
Error Message ACLTCAM-2-PSS_OPEN_FAILED: PSS open failed - [hex].
Explanation Persistent database handle could not be obtained for ACLTCAM. [hex] is the error.
Recommended Action No action is required.
Error Message ACLTCAM-2-RECONS_FAILED: Reconstruction of TCAM contents failed during upgrade - [hex].
Explanation During nondisruptive upgrade, the ACLTCAM contents are not properly reconstructed. [hex] is the error.
Recommended Action No action is required.
ACLTCAM-3
Error Message ACLTCAM-3-REGISTER_FAILED: Could not register to MTS opcode [chars] - error [hex].
Explanation ACLTCAM process could not register to the notifications mentioned by [chars]. [hex] is the error.
Recommended Action No action is required.
ACLTCAM-4
Error Message ACLTCAM-4-ACL_TCAM_BELOW_THRESHOLD: [chars] TCAM usage ([dec]/[dec]) fell below [dec]% fwd-eng: [dec], [chars]
Explanation [chars] TCAM usage [dec]/[dec] fell below [dec] percent on fwd-engine [dec], [chars].
Recommended Action No action is required.
Error Message ACLTCAM-4-ACL_TCAM_BEYOND_THRESHOLD: [chars] TCAM usage ([dec]/[dec]) exceeded [dec]% fwd-eng: [dec], [chars]
Explanation [chars] TCAM usage [dec]/[dec] exceeded [dec] percent on fwd-engine [dec], [chars].
Recommended Action No action is required.
2-18Cisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Chapter 2 System Messages and Recovery Procedures for Cisco NX-OSAM Messages
Error Message ACLTCAM-4-ACL_TCAM_FLOW_COUNTER_INVALIDATED: Flow counter for flow: vsan: [dec], sid: [hex], did: [hex] with statistics: frames = %llu & bytes = %llu was invalidated due to: [chars]
Explanation ACLTCAM process invalidated the flow counter for flow VSAN [dec] SID [hex] DID [hex] with collected stats of [dec] frames and [dev] bytes was invalidated because of reason [[chars]].
Recommended Action No action is required.
Error Message ACLTCAM-4-ACL_TCAM_FLOW_COUNTER_VALIDATED: Flow counter for flow: vsan: [dec], sid: [hex], did: [hex] is now valid
Explanation ACLTCAM process validated the flow counter for flow VSAN [dec] SID [hex] DID [hex].
Recommended Action No action is required.
ACLTCAM-6
Error Message ACLTCAM-6-ACL_TCAM_STATUS: Status: [chars].
Explanation ACLTCAM status is reported as: [chars].
Recommended Action No action is required.
AM MessagesThis section contains the AM messages.
AM-2
Error Message AM-2-API_INIT Format: Failed to initialize %s API
Explanation An unrecoverable software error has occurred during the AM initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system.
Error Message AM-2-BAD_TIMER Format: %s
Explanation An unrecoverable software error has occurred during the AM initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system.
2-19Cisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Chapter 2 System Messages and Recovery Procedures for Cisco NX-OSAM Messages
Error Message AM-2-CLI_INIT Format: Failed to initialize CLI
Explanation An unrecoverable software error has occurred during the AM initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system.
Error Message AM-2-INIT_FAIL Format: Initialization failure
Explanation An unrecoverable software error has occurred during the AM initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system.
Error Message AM-2-MQ_OPEN Format: Failed to open message queue %s: %s
Explanation An unrecoverable software error has occurred during the AM initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system.
Error Message AM-2-MTS_BIND Format: Failed to do mts_bind for %s: %s
Explanation An unrecoverable software error has occurred during the AM initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system.
Error Message AM-2-MTS_OPC_SET Format: Failed to register with opcode %d: %s
Explanation An unrecoverable software error has occurred during the AM initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system.
Error Message AM-2-MTS_RECV Format: MTS queue receive failed on %s queue: %s
Explanation An unexpected fatal error has occurred.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system.
Error Message AM-2-MTS_SADDR_GET Format: Failed to get source of mts queue %s: %s
Explanation An unrecoverable software error has occurred during the AM initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system.
2-20Cisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Chapter 2 System Messages and Recovery Procedures for Cisco NX-OSAM Messages
Error Message AM-2-NO_WORKBIT Format: Failed to register %s too many notify clients
Explanation An unexpected fatal error has occurred.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message AM-2-REQD_COMP_DOWN Format: Required component \%s\ has gone down.
Explanation An unexpected fatal error has occurred.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system.
Error Message AM-2-REQD_COMP_FAIL Format: Required component \%s\ has failed to initialize.
Explanation An unrecoverable software error has occurred during the AM initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system.
Error Message AM-2-SDB_CREAT Format: Failed to create shared database
Explanation An unrecoverable software error has occurred during the AM initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system.
Error Message AM-2-SDB_DESTROY Format: Failed to destroy shared database
Explanation An unrecoverable software error has occurred during the AM initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system.
Error Message AM-2-SDB_OPEN Format: Failed to open shared database
Explanation An unrecoverable software error has occurred during the AM initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system.
Error Message AM-2-SET_SCHED Format: Failed to set policy or priority
Explanation An unrecoverable software error has occurred during the AM initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system.
2-21Cisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Chapter 2 System Messages and Recovery Procedures for Cisco NX-OSAM Messages
Error Message AM-2-SHM_CREAT Format: Failed to create shared memory: %s
Explanation An unrecoverable software error has occurred during the AM initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system.
Error Message AM-2-SHM_LOCK_CREAT Format: Failed to create shared memory lock: %s
Explanation An unrecoverable software error has occurred during the AM initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system.
Error Message AM-2-SVR_REG Format: Failed to register as a client of %s for VRF %s
Explanation An unrecoverable software error has occurred during the AM initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system.
Error Message AM-2-SYSMGR_NAME Format: Failed to get name from sysmgr during %s
Explanation An unrecoverable software error has occurred during the AM initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system.
Error Message AM-2-SYSMGR_NOTIFY Format: Bad notification from sysmgr for %s
Explanation An unrecoverable software error has occurred during the AM initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system.
Error Message AM-2-SYSMGR_QUERY Format: Failed to query sysmgr for %s
Explanation An unrecoverable software error has occurred during the AM initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system.
Error Message AM-2-SYSMGR_UUID Format: Failed to get uuid from sysmgr during %s
Explanation An unrecoverable software error has occurred during the AM initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system.
2-22Cisco NX-OS System Messages Reference
OL-23717-01
-
Send document comments to nexus7k - feedback -doc@c i sco .com
Chapter 2 System Messages and Recovery Procedures for Cisco NX-OSAM Messages
Error Message AM-2-THR_CREAT Format: Failed to create thread %s: error %d
Explanation An unrecoverable software error has occurred during the AM initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system.
Error Message AM-2-THREAD_FAIL Format: Failed to start %s thread
Explanation An unrecoverable software error has occurred during the AM initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system.
Error Message AM-2-URIB_PIB Format: Unable to get pib for %s VR