Cisco CWDM Example
-
Upload
scott-jones -
Category
Documents
-
view
84 -
download
3
Transcript of Cisco CWDM Example
Cisco CWDM Filters Data Sheet
Cisco CWDM SFP Optics Data Sheet
CW
DM
-MU
X8
A=
CW
DM
-MU
X8
A=CWDM SFP Optics
IN
OutCh. 1
CWDM SFP OpticsIN
OutCh. 8
.
.
.
SFPs installed in networking equipment.Each SFP a different CWDM wavelength.
CWDM SFP OpticsIN
OutCh. 1
CWDM SFP OpticsIN
OutCh. 8
.
.
.
Cable with 6 singlemode fibers.Only 2 fibers needed for this application.
Fiber #1
Fiber #2
INOut
In Out
8 GE CHANNEL - CWDM EXAMPLE
http://www.cisco.com/en/US/prod/collateral/modules/ps5455/ps6576/product_data_sheet0900aecd80582763.html
https://www.cisco.com/en/US/prod/collateral/modules/ps5455/ps6575/product_data_sheet0900aecd8029d01b_ps708_Products_Data_Sheet.html
7 km of fiber would equal approx 2dB of optical loss. Two CWDM MUX8A filters equals 4.4dB of loss. Minimum transmit power of CWDM SFP is 0dBm and maximum receiver sensitivity is -28dBm (-9dB is maximum input power) . Estimating losses and receive signal level: 0dBm(min. transmit power) – 2dB (fiber loss) - 4.4dB (CWDM filter loss) = --6.4dBm receive power. The optical receiver wants to see a input power of between -9 and -28dBm, thus I would add an extra 10dB of signal loss using optical attenuators (on fibers 1 & 2 or on each OUT port on the CWDM MUX8A) getting the signal in the correct operating range.
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.