Cisco CCNA Data Center Boot Camp (Accelerated)€¦ · Reviewing the Cisco MDS Product Family Lab...

CCNADCBC 1.0 www.globalknowledge.com/es-es/ [email protected] (34) 91 425 06 60

Cisco CCNA Data Center Boot Camp (Accelerated)

Duración: 5 Días Código del Curso: CCNADCBC Version: 1.0

Temario:

Our accelerated CCNA DC Boot Camp is an intensive program, designed to help you achieve your CCNA DC certification in a reduced periodof time. The introductory level of knowledge that is taught in these courses is aimed at individuals that will be perfor ming only the more basicconfiguration tasks. The labs will focus on viewing configurations, as opposed to making configuration changes or creating new topologies.Cisco technologies that are deployed in the Data Center : unified computing, unified fabric, and network services. Students will only learn howto perform the more basic configuration tasks. Labs will focus on verifying configurations, with selected exercises involving makingconfiguration changes or designing new topologies.

Dirigido a:

CCNA’s and CCNP’s needing to recert and/or update skills Network administrators Network engineers Cisco Integrators/Partners Systemsengineers Network designers Network managers Consulting systems engineers Technical solutions architects

Objetivos:

Describe and verify Cisco data center fundamentals

After you complete this course you should be able to:

Describe how a network works Describe Cisco data center virtualization

Configure, verify, and troubleshoot a switch with VLANs and Describe Cisco data center storage networkingInter-switch communications

Describe Cisco data center unified fabricImplement an IP addressing scheme and IP services to meetnetwork requirements

Describe and verify Cisco UCS

Configure, verify, and troubleshoot routing operations on CiscoNexus switches

Prerequisitos: Exámenes y certificación

Attendees should meet the following prerequisites: Recommended preparation for exam(s):

Basic Windows navigation and keyboard literacy skills 640-911 DCICN Introcucing Cisco Data Center NetworkingBasic Internet usage skills 640-916 DCICT Introducing Cisco Data Center TechnologiesBasic IP addressing knowledge


Siguientes cursos recomendados:

The following Courses are recommended for further study:

DCUCI - Cisco Data Center Unified Computing ImplementationDCUFI - Implementing Cisco Data Center Unified FabricDCUCD - Cisco Data Center Unified Computing DesignDCUFD - Designing Cisco Data Center Unified FabricDCUCT - Troubleshooting Cisco Data Center Unified ComputingDCUFT - Troubleshooting Cisco Data Center Unified FabricDCID - Designing Cisco Data Center InfrastructureDCII - Implementing Cisco Data Center InfrastructureDCIT - Troubleshooting Cisco Data Center InfrastructureDCUCI - Cisco Data Center Unified Computing ImplementationDCVAI - Implementing Cisco Data Center Virtualisation and Automation


Contenido:

1: Simple Network Designline line line

Understanding the Functions of Networking Understanding the Host-to-Host Understanding the Host-to-HostCommunications Model Communications ModelDescribing Ethernet Connections Describing Ethernet Connections

line Describing Ethernet Communications Describing Ethernet CommunicationsUnderstanding the Host-to-Host Standards StandardsCommunications Model Describing OSI Network Layer Describing OSI Network Layer AddressingDescribing Ethernet Connections Addressing Describing the TCP/IP Transport LayerDescribing Ethernet Communications Describing the TCP/IP Transport Layer Describing the Packet Delivery ProcessStandards Describing the Packet Delivery Process Describing the Packet Delivery ProcessDescribing OSI Network Layer Addressing Describing the Packet Delivery Process Describing Cisco NX-OS SoftwareDescribing the TCP/IP Transport Layer Describing Cisco NX-OS Software Operating Cisco NX-OS SoftwareDescribing the Packet Delivery Process Operating Cisco NX-OS Software Implementing VLANs and TrunksDescribing the Packet Delivery Process Implementing VLANs and Trunks Building a Redundant Switched Topology Describing Cisco NX-OS Software Building a Redundant Switched Topology Transitioning to IPv6 Operating Cisco NX-OS Software Transitioning to IPv6 Exploring the Routing Process on CiscoImplementing VLANs and Trunks Exploring the Routing Process on Cisco Nexus SwitchesBuilding a Redundant Switched Topology Nexus Switches Exploring Routing Protocols on CiscoTransitioning to IPv6 Exploring Routing Protocols on Cisco Nexus SwitchesExploring the Routing Process on Cisco Nexus Switches Exploring ACLs on Cisco Nexus Switches Nexus Switches Exploring ACLs on Cisco Nexus Switches Reviewing the Cisco Nexus Product FamilyExploring Routing Protocols on Cisco Nexus Reviewing the Cisco Nexus Product Reviewing the Cisco MDS Product FamilySwitches Family Monitoring the Cisco Nexus 7000 andExploring ACLs on Cisco Nexus Switches Reviewing the Cisco MDS Product Family 5000 Series SwitchesReviewing the Cisco Nexus Product Family Monitoring the Cisco Nexus 7000 and Describing vPCs and Cisco FabricPath inReviewing the Cisco MDS Product Family 5000 Series Switches the Data CenterMonitoring the Cisco Nexus 7000 and 5000 Describing vPCs and Cisco FabricPath in Using OTV on Cisco Nexus 7000 SeriesSeries Switches the Data Center Switches Describing vPCs and Cisco FabricPath in Using OTV on Cisco Nexus 7000 Series Virtualizing Storagethe Data Center Switches Virtualizing Server SolutionsUsing OTV on Cisco Nexus 7000 Series Virtualizing Storage Using the Cisco Nexus 1000V SeriesSwitches Virtualizing Server Solutions SwitchVirtualizing Storage Using the Cisco Nexus 1000V Series Describing Fibre Channel StorageVirtualizing Server Solutions Switch NetworkingUsing the Cisco Nexus 1000V Series Switch Describing Fibre Channel Storage Verifying Fibre Channel CommunicationsDescribing Fibre Channel Storage Networking on Cisco MDS 9000 Series MultilayerNetworking Verifying Fibre Channel Communications Switches Verifying Fibre Channel Communications on on Cisco MDS 9000 Series Multilayer Identifying Connectivity Options for FCoECisco MDS 9000 Series Multilayer Switches Switches on the Cisco Nexus 5000Identifying Connectivity Options for FCoE on Identifying Connectivity Options for FCoE Describing Enhanced FCoE Scalabilitythe Cisco Nexus 5000 on the Cisco Nexus 5000 with Cisco Nexus 2232 10GE FabricDescribing Enhanced FCoE Scalability with Describing Enhanced FCoE Scalability Extenders Cisco Nexus 2232 10GE Fabric Extenders with Cisco Nexus 2232 10GE Fabric Describing the Cisco UCS C-SeriesDescribing the Cisco UCS C-Series Product Extenders Product FamilyFamily Describing the Cisco UCS C-Series Connecting Cisco UCS B-Series BladeConnecting Cisco UCS B-Series Blade Product Family ServersServers Connecting Cisco UCS B-Series Blade Setting up an Initial Cisco UCS B-SeriesSetting up an Initial Cisco UCS B-Series Servers ClusterCluster Setting up an Initial Cisco UCS B-Series Describing Cisco UCS ManagerDescribing Cisco UCS Manager Operations Cluster OperationsDescribing Cisco UCS Manager Pools, Describing Cisco UCS Manager Describing Cisco UCS Manager Pools,Policies, Templates, and Chassis and Blade Operations Policies, Templates, and Chassis andPower Capping Describing Cisco UCS Manager Pools, Blade Power Capping Lab 1-2: Observing the TCP Three-Way Policies, Templates, and Chassis and Lab 1-2: Observing the TCP Three-WayHandshake Blade Power Capping HandshakeLab 1-3: Observing Extended PC Network Lab 1-2: Observing the TCP Three-Way Lab 1-3: Observing Extended PC NetworkInformation Handshake InformationLab 2-1: Connecting to Cisco Nexus Lab 1-3: Observing Extended PC Lab 2-1: Connecting to Cisco NexusSwitches Network Information SwitchesLab 2-2: Configuring Cisco Nexus Switches Lab 2-1: Connecting to Cisco Nexus Lab 2-2: Configuring Cisco NexusLab 2-3: Configuring VLANs and Trunks Switches SwitchesLab 2-4: Verifying and Configuring Spanning Lab 2-2: Configuring Cisco Nexus Lab 2-3: Configuring VLANs and Trunks


Tree Switches Lab 2-4: Verifying and ConfiguringLab 2-5: Configuring EtherChannel Lab 2-3: Configuring VLANs and Trunks Spanning TreeLab 3-1: Converting Decimal to Binary and Lab 2-4: Verifying and Configuring Lab 2-5: Configuring EtherChannelBinary to Decimal Spanning Tree Lab 3-1: Converting Decimal to Binary andLab 3-2: Classifying Network Addressing Lab 2-5: Configuring EtherChannel Binary to DecimalLab 3-3: Computing Usable Subnetworks Lab 3-1: Converting Decimal to Binary Lab 3-2: Classifying Network Addressingand Hosts and Binary to Decimal Lab 3-3: Computing Usable SubnetworksLab 3-4: Calculating Subnet Masks Lab 3-2: Classifying Network Addressing and HostsLab 4-1: Configuring Multilayer Switching Lab 3-3: Computing Usable Subnetworks Lab 3-4: Calculating Subnet MasksLab 1-2: Connecting to a Cisco Nexus 5000 and Hosts Lab 4-1: Configuring Multilayer Switching Series Switch Using SSH Lab 3-4: Calculating Subnet Masks Lab 1-2: Connecting to a Cisco NexusLab 1-3: Running CLI Commands Lab 4-1: Configuring Multilayer Switching 5000 Series Switch Using SSHLab 1-4: Configuring vPCs Lab 1-2: Connecting to a Cisco Nexus Lab 1-3: Running CLI CommandsLab 1-5: Validating Cisco FabricPath 5000 Series Switch Using SSH Lab 1-4: Configuring vPCsConfiguration Lab 1-3: Running CLI Commands Lab 1-5: Validating Cisco FabricPathLab 1-6: Validating OTV Configuration Lab 1-4: Configuring vPCs ConfigurationLab 2-1: Verifying Current VDC Settings Lab 1-5: Validating Cisco FabricPath Lab 1-6: Validating OTV ConfigurationLab 2-2: Validating a Cisco Nexus 2000 Configuration Lab 2-1: Verifying Current VDC SettingsSeries Fabric Extender Configuration Lab 1-6: Validating OTV Configuration Lab 2-2: Validating a Cisco Nexus 2000Lab 2-3: Validating a Cisco Nexus 1000V Lab 2-1: Verifying Current VDC Settings Series Fabric Extender ConfigurationSeries Switch Configuration Lab 2-2: Validating a Cisco Nexus 2000 Lab 2-3: Validating a Cisco Nexus 1000VLab 3-1: Validating a Cisco MDS 9100 Series Fabric Extender Configuration Series Switch ConfigurationSeries Multilayer Fabric Switch License Lab 2-3: Validating a Cisco Nexus 1000V Lab 3-1: Validating a Cisco MDS 9100Lab 3-2: Configuring VSANs and Zoning Series Switch Configuration Series Multilayer Fabric Switch LicenseLab 3-3: Validating FLOGI and FCNS Lab 3-1: Validating a Cisco MDS 9100 Lab 3-2: Configuring VSANs and ZoningLab 3-3: Viewing the tech-support Command Series Multilayer Fabric Switch License Lab 3-3: Validating FLOGI and FCNSOutput Lab 3-2: Configuring VSANs and Zoning Lab 3-3: Viewing the tech-supportLab 4-1: Validating the Physical Lab 3-3: Validating FLOGI and FCNS Command OutputConnections for FCoE Lab 3-3: Viewing the tech-support Lab 4-1: Validating the PhysicalLab 5-1: Exploring the Cisco UCS Manager Command Output Connections for FCoEGUI Lab 4-1: Validating the Physical Lab 5-1: Exploring the Cisco UCSLab 5-2: Creating a Service Profile from a Connections for FCoE Manager GUITemplate and Performing VMware ESXi 5.0 Lab 5-1: Exploring the Cisco UCS Lab 5-2: Creating a Service Profile from aSAN Boot Manager GUI Template and Performing VMware ESXi

Lab 5-2: Creating a Service Profile from a 5.0 SAN BootTemplate and Performing VMware ESXi

line 5.0 SAN BootUnderstanding the Host-to-Host lineCommunications Model 6: Cisco Data Center Virtualization Understanding the Host-to-HostDescribing Ethernet Connections line Communications ModelDescribing Ethernet Communications Virtualizing Network Devices Describing Ethernet ConnectionsStandards Describing Ethernet CommunicationsDescribing OSI Network Layer Addressing StandardsDescribing the TCP/IP Transport Layer line Describing OSI Network Layer AddressingDescribing the Packet Delivery Process Understanding the Host-to-Host Describing the TCP/IP Transport LayerDescribing the Packet Delivery Process Communications Model Describing the Packet Delivery ProcessDescribing Cisco NX-OS Software Describing Ethernet Connections Describing the Packet Delivery ProcessOperating Cisco NX-OS Software Describing Ethernet Communications Describing Cisco NX-OS SoftwareImplementing VLANs and Trunks Standards Operating Cisco NX-OS SoftwareBuilding a Redundant Switched Topology Describing OSI Network Layer Implementing VLANs and TrunksTransitioning to IPv6 Addressing Building a Redundant Switched Topology Exploring the Routing Process on Cisco Describing the TCP/IP Transport Layer Transitioning to IPv6 Nexus Switches Describing the Packet Delivery Process Exploring the Routing Process on CiscoExploring Routing Protocols on Cisco Nexus Describing the Packet Delivery Process Nexus SwitchesSwitches Describing Cisco NX-OS Software Exploring Routing Protocols on CiscoExploring ACLs on Cisco Nexus Switches Operating Cisco NX-OS Software Nexus SwitchesReviewing the Cisco Nexus Product Family Implementing VLANs and Trunks Exploring ACLs on Cisco Nexus Switches Reviewing the Cisco MDS Product Family Building a Redundant Switched Topology Reviewing the Cisco Nexus Product FamilyMonitoring the Cisco Nexus 7000 and 5000 Transitioning to IPv6 Reviewing the Cisco MDS Product FamilySeries Switches Exploring the Routing Process on Cisco Monitoring the Cisco Nexus 7000 andDescribing vPCs and Cisco FabricPath in Nexus Switches 5000 Series Switchesthe Data Center Exploring Routing Protocols on Cisco Describing vPCs and Cisco FabricPath inUsing OTV on Cisco Nexus 7000 Series Nexus Switches the Data CenterSwitches Exploring ACLs on Cisco Nexus Switches Using OTV on Cisco Nexus 7000 SeriesVirtualizing Storage Reviewing the Cisco Nexus Product Switches


Virtualizing Server Solutions Family Virtualizing StorageUsing the Cisco Nexus 1000V Series Switch Reviewing the Cisco MDS Product Family Virtualizing Server SolutionsDescribing Fibre Channel Storage Monitoring the Cisco Nexus 7000 and Using the Cisco Nexus 1000V SeriesNetworking 5000 Series Switches SwitchVerifying Fibre Channel Communications on Describing vPCs and Cisco FabricPath in Describing Fibre Channel StorageCisco MDS 9000 Series Multilayer Switches the Data Center NetworkingIdentifying Connectivity Options for FCoE on Using OTV on Cisco Nexus 7000 Series Verifying Fibre Channel Communicationsthe Cisco Nexus 5000 Switches on Cisco MDS 9000 Series MultilayerDescribing Enhanced FCoE Scalability with Virtualizing Storage Switches Cisco Nexus 2232 10GE Fabric Extenders Virtualizing Server Solutions Identifying Connectivity Options for FCoEDescribing the Cisco UCS C-Series Product Using the Cisco Nexus 1000V Series on the Cisco Nexus 5000Family Switch Describing Enhanced FCoE ScalabilityConnecting Cisco UCS B-Series Blade Describing Fibre Channel Storage with Cisco Nexus 2232 10GE FabricServers Networking Extenders Setting up an Initial Cisco UCS B-Series Verifying Fibre Channel Communications Describing the Cisco UCS C-SeriesCluster on Cisco MDS 9000 Series Multilayer Product FamilyDescribing Cisco UCS Manager Operations Switches Connecting Cisco UCS B-Series BladeDescribing Cisco UCS Manager Pools, Identifying Connectivity Options for FCoE ServersPolicies, Templates, and Chassis and Blade on the Cisco Nexus 5000 Setting up an Initial Cisco UCS B-SeriesPower Capping Describing Enhanced FCoE Scalability ClusterLab 1-2: Observing the TCP Three-Way with Cisco Nexus 2232 10GE Fabric Describing Cisco UCS ManagerHandshake Extenders OperationsLab 1-3: Observing Extended PC Network Describing the Cisco UCS C-Series Describing Cisco UCS Manager Pools,Information Product Family Policies, Templates, and Chassis andLab 2-1: Connecting to Cisco Nexus Connecting Cisco UCS B-Series Blade Blade Power Capping Switches Servers Lab 1-2: Observing the TCP Three-WayLab 2-2: Configuring Cisco Nexus Switches Setting up an Initial Cisco UCS B-Series HandshakeLab 2-3: Configuring VLANs and Trunks Cluster Lab 1-3: Observing Extended PC NetworkLab 2-4: Verifying and Configuring Spanning Describing Cisco UCS Manager InformationTree Operations Lab 2-1: Connecting to Cisco NexusLab 2-5: Configuring EtherChannel Describing Cisco UCS Manager Pools, SwitchesLab 3-1: Converting Decimal to Binary and Policies, Templates, and Chassis and Lab 2-2: Configuring Cisco NexusBinary to Decimal Blade Power Capping SwitchesLab 3-2: Classifying Network Addressing Lab 1-2: Observing the TCP Three-Way Lab 2-3: Configuring VLANs and TrunksLab 3-3: Computing Usable Subnetworks Handshake Lab 2-4: Verifying and Configuringand Hosts Lab 1-3: Observing Extended PC Spanning TreeLab 3-4: Calculating Subnet Masks Network Information Lab 2-5: Configuring EtherChannelLab 4-1: Configuring Multilayer Switching Lab 2-1: Connecting to Cisco Nexus Lab 3-1: Converting Decimal to Binary andLab 1-2: Connecting to a Cisco Nexus 5000 Switches Binary to DecimalSeries Switch Using SSH Lab 2-2: Configuring Cisco Nexus Lab 3-2: Classifying Network AddressingLab 1-3: Running CLI Commands Switches Lab 3-3: Computing Usable SubnetworksLab 1-4: Configuring vPCs Lab 2-3: Configuring VLANs and Trunks and HostsLab 1-5: Validating Cisco FabricPath Lab 2-4: Verifying and Configuring Lab 3-4: Calculating Subnet MasksConfiguration Spanning Tree Lab 4-1: Configuring Multilayer Switching Lab 1-6: Validating OTV Configuration Lab 2-5: Configuring EtherChannel Lab 1-2: Connecting to a Cisco NexusLab 2-1: Verifying Current VDC Settings Lab 3-1: Converting Decimal to Binary 5000 Series Switch Using SSHLab 2-2: Validating a Cisco Nexus 2000 and Binary to Decimal Lab 1-3: Running CLI CommandsSeries Fabric Extender Configuration Lab 3-2: Classifying Network Addressing Lab 1-4: Configuring vPCsLab 2-3: Validating a Cisco Nexus 1000V Lab 3-3: Computing Usable Subnetworks Lab 1-5: Validating Cisco FabricPathSeries Switch Configuration and Hosts ConfigurationLab 3-1: Validating a Cisco MDS 9100 Lab 3-4: Calculating Subnet Masks Lab 1-6: Validating OTV ConfigurationSeries Multilayer Fabric Switch License Lab 4-1: Configuring Multilayer Switching Lab 2-1: Verifying Current VDC SettingsLab 3-2: Configuring VSANs and Zoning Lab 1-2: Connecting to a Cisco Nexus Lab 2-2: Validating a Cisco Nexus 2000Lab 3-3: Validating FLOGI and FCNS 5000 Series Switch Using SSH Series Fabric Extender ConfigurationLab 3-3: Viewing the tech-support Command Lab 1-3: Running CLI Commands Lab 2-3: Validating a Cisco Nexus 1000VOutput Lab 1-4: Configuring vPCs Series Switch ConfigurationLab 4-1: Validating the Physical Lab 1-5: Validating Cisco FabricPath Lab 3-1: Validating a Cisco MDS 9100Connections for FCoE Configuration Series Multilayer Fabric Switch LicenseLab 5-1: Exploring the Cisco UCS Manager Lab 1-6: Validating OTV Configuration Lab 3-2: Configuring VSANs and ZoningGUI Lab 2-1: Verifying Current VDC Settings Lab 3-3: Validating FLOGI and FCNSLab 5-2: Creating a Service Profile from a Lab 2-2: Validating a Cisco Nexus 2000 Lab 3-3: Viewing the tech-supportTemplate and Performing VMware ESXi 5.0 Series Fabric Extender Configuration Command OutputSAN Boot Lab 2-3: Validating a Cisco Nexus 1000V Lab 4-1: Validating the Physical

Series Switch Configuration Connections for FCoELab 3-1: Validating a Cisco MDS 9100 Lab 5-1: Exploring the Cisco UCS


line Series Multilayer Fabric Switch License Manager GUIUnderstanding the Host-to-Host Lab 3-2: Configuring VSANs and Zoning Lab 5-2: Creating a Service Profile from aCommunications Model Lab 3-3: Validating FLOGI and FCNS Template and Performing VMware ESXiDescribing Ethernet Connections Lab 3-3: Viewing the tech-support 5.0 SAN BootDescribing Ethernet Communications Command OutputStandards Lab 4-1: Validating the PhysicalDescribing OSI Network Layer Addressing Connections for FCoE lineDescribing the TCP/IP Transport Layer Lab 5-1: Exploring the Cisco UCS Understanding the Host-to-HostDescribing the Packet Delivery Process Manager GUI Communications ModelDescribing the Packet Delivery Process Lab 5-2: Creating a Service Profile from a Describing Ethernet ConnectionsDescribing Cisco NX-OS Software Template and Performing VMware ESXi Describing Ethernet CommunicationsOperating Cisco NX-OS Software 5.0 SAN Boot StandardsImplementing VLANs and Trunks Describing OSI Network Layer AddressingBuilding a Redundant Switched Topology Describing the TCP/IP Transport LayerTransitioning to IPv6 line Describing the Packet Delivery ProcessExploring the Routing Process on Cisco Understanding the Host-to-Host Describing the Packet Delivery ProcessNexus Switches Communications Model Describing Cisco NX-OS SoftwareExploring Routing Protocols on Cisco Nexus Describing Ethernet Connections Operating Cisco NX-OS SoftwareSwitches Describing Ethernet Communications Implementing VLANs and TrunksExploring ACLs on Cisco Nexus Switches Standards Building a Redundant Switched Topology Reviewing the Cisco Nexus Product Family Describing OSI Network Layer Transitioning to IPv6 Reviewing the Cisco MDS Product Family Addressing Exploring the Routing Process on CiscoMonitoring the Cisco Nexus 7000 and 5000 Describing the TCP/IP Transport Layer Nexus SwitchesSeries Switches Describing the Packet Delivery Process Exploring Routing Protocols on CiscoDescribing vPCs and Cisco FabricPath in Describing the Packet Delivery Process Nexus Switchesthe Data Center Describing Cisco NX-OS Software Exploring ACLs on Cisco Nexus Switches Using OTV on Cisco Nexus 7000 Series Operating Cisco NX-OS Software Reviewing the Cisco Nexus Product FamilySwitches Implementing VLANs and Trunks Reviewing the Cisco MDS Product FamilyVirtualizing Storage Building a Redundant Switched Topology Monitoring the Cisco Nexus 7000 andVirtualizing Server Solutions Transitioning to IPv6 5000 Series SwitchesUsing the Cisco Nexus 1000V Series Switch Exploring the Routing Process on Cisco Describing vPCs and Cisco FabricPath inDescribing Fibre Channel Storage Nexus Switches the Data CenterNetworking Exploring Routing Protocols on Cisco Using OTV on Cisco Nexus 7000 SeriesVerifying Fibre Channel Communications on Nexus Switches Switches Cisco MDS 9000 Series Multilayer Switches Exploring ACLs on Cisco Nexus Switches Virtualizing StorageIdentifying Connectivity Options for FCoE on Reviewing the Cisco Nexus Product Virtualizing Server Solutionsthe Cisco Nexus 5000 Family Using the Cisco Nexus 1000V SeriesDescribing Enhanced FCoE Scalability with Reviewing the Cisco MDS Product Family SwitchCisco Nexus 2232 10GE Fabric Extenders Monitoring the Cisco Nexus 7000 and Describing Fibre Channel StorageDescribing the Cisco UCS C-Series Product 5000 Series Switches NetworkingFamily Describing vPCs and Cisco FabricPath in Verifying Fibre Channel CommunicationsConnecting Cisco UCS B-Series Blade the Data Center on Cisco MDS 9000 Series MultilayerServers Using OTV on Cisco Nexus 7000 Series Switches Setting up an Initial Cisco UCS B-Series Switches Identifying Connectivity Options for FCoECluster Virtualizing Storage on the Cisco Nexus 5000Describing Cisco UCS Manager Operations Virtualizing Server Solutions Describing Enhanced FCoE ScalabilityDescribing Cisco UCS Manager Pools, Using the Cisco Nexus 1000V Series with Cisco Nexus 2232 10GE FabricPolicies, Templates, and Chassis and Blade Switch Extenders Power Capping Describing Fibre Channel Storage Describing the Cisco UCS C-SeriesLab 1-2: Observing the TCP Three-Way Networking Product FamilyHandshake Verifying Fibre Channel Communications Connecting Cisco UCS B-Series BladeLab 1-3: Observing Extended PC Network on Cisco MDS 9000 Series Multilayer ServersInformation Switches Setting up an Initial Cisco UCS B-SeriesLab 2-1: Connecting to Cisco Nexus Identifying Connectivity Options for FCoE ClusterSwitches on the Cisco Nexus 5000 Describing Cisco UCS ManagerLab 2-2: Configuring Cisco Nexus Switches Describing Enhanced FCoE Scalability OperationsLab 2-3: Configuring VLANs and Trunks with Cisco Nexus 2232 10GE Fabric Describing Cisco UCS Manager Pools,Lab 2-4: Verifying and Configuring Spanning Extenders Policies, Templates, and Chassis andTree Describing the Cisco UCS C-Series Blade Power Capping Lab 2-5: Configuring EtherChannel Product Family Lab 1-2: Observing the TCP Three-WayLab 3-1: Converting Decimal to Binary and Connecting Cisco UCS B-Series Blade HandshakeBinary to Decimal Servers Lab 1-3: Observing Extended PC NetworkLab 3-2: Classifying Network Addressing Setting up an Initial Cisco UCS B-Series InformationLab 3-3: Computing Usable Subnetworks Cluster Lab 2-1: Connecting to Cisco Nexusand Hosts Describing Cisco UCS Manager Switches


Lab 3-4: Calculating Subnet Masks Operations Lab 2-2: Configuring Cisco NexusLab 4-1: Configuring Multilayer Switching Describing Cisco UCS Manager Pools, SwitchesLab 1-2: Connecting to a Cisco Nexus 5000 Policies, Templates, and Chassis and Lab 2-3: Configuring VLANs and TrunksSeries Switch Using SSH Blade Power Capping Lab 2-4: Verifying and ConfiguringLab 1-3: Running CLI Commands Lab 1-2: Observing the TCP Three-Way Spanning TreeLab 1-4: Configuring vPCs Handshake Lab 2-5: Configuring EtherChannelLab 1-5: Validating Cisco FabricPath Lab 1-3: Observing Extended PC Lab 3-1: Converting Decimal to Binary andConfiguration Network Information Binary to DecimalLab 1-6: Validating OTV Configuration Lab 2-1: Connecting to Cisco Nexus Lab 3-2: Classifying Network AddressingLab 2-1: Verifying Current VDC Settings Switches Lab 3-3: Computing Usable SubnetworksLab 2-2: Validating a Cisco Nexus 2000 Lab 2-2: Configuring Cisco Nexus and HostsSeries Fabric Extender Configuration Switches Lab 3-4: Calculating Subnet MasksLab 2-3: Validating a Cisco Nexus 1000V Lab 2-3: Configuring VLANs and Trunks Lab 4-1: Configuring Multilayer Switching Series Switch Configuration Lab 2-4: Verifying and Configuring Lab 1-2: Connecting to a Cisco NexusLab 3-1: Validating a Cisco MDS 9100 Spanning Tree 5000 Series Switch Using SSHSeries Multilayer Fabric Switch License Lab 2-5: Configuring EtherChannel Lab 1-3: Running CLI CommandsLab 3-2: Configuring VSANs and Zoning Lab 3-1: Converting Decimal to Binary Lab 1-4: Configuring vPCsLab 3-3: Validating FLOGI and FCNS and Binary to Decimal Lab 1-5: Validating Cisco FabricPathLab 3-3: Viewing the tech-support Command Lab 3-2: Classifying Network Addressing ConfigurationOutput Lab 3-3: Computing Usable Subnetworks Lab 1-6: Validating OTV ConfigurationLab 4-1: Validating the Physical and Hosts Lab 2-1: Verifying Current VDC SettingsConnections for FCoE Lab 3-4: Calculating Subnet Masks Lab 2-2: Validating a Cisco Nexus 2000Lab 5-1: Exploring the Cisco UCS Manager Lab 4-1: Configuring Multilayer Switching Series Fabric Extender ConfigurationGUI Lab 1-2: Connecting to a Cisco Nexus Lab 2-3: Validating a Cisco Nexus 1000VLab 5-2: Creating a Service Profile from a 5000 Series Switch Using SSH Series Switch ConfigurationTemplate and Performing VMware ESXi 5.0 Lab 1-3: Running CLI Commands Lab 3-1: Validating a Cisco MDS 9100SAN Boot Lab 1-4: Configuring vPCs Series Multilayer Fabric Switch License

Lab 1-5: Validating Cisco FabricPath Lab 3-2: Configuring VSANs and ZoningConfiguration Lab 3-3: Validating FLOGI and FCNS

line Lab 1-6: Validating OTV Configuration Lab 3-3: Viewing the tech-supportUnderstanding the Host-to-Host Lab 2-1: Verifying Current VDC Settings Command OutputCommunications Model Lab 2-2: Validating a Cisco Nexus 2000 Lab 4-1: Validating the PhysicalDescribing Ethernet Connections Series Fabric Extender Configuration Connections for FCoEDescribing Ethernet Communications Lab 2-3: Validating a Cisco Nexus 1000V Lab 5-1: Exploring the Cisco UCSStandards Series Switch Configuration Manager GUIDescribing OSI Network Layer Addressing Lab 3-1: Validating a Cisco MDS 9100 Lab 5-2: Creating a Service Profile from aDescribing the TCP/IP Transport Layer Series Multilayer Fabric Switch License Template and Performing VMware ESXiDescribing the Packet Delivery Process Lab 3-2: Configuring VSANs and Zoning 5.0 SAN BootDescribing the Packet Delivery Process Lab 3-3: Validating FLOGI and FCNSDescribing Cisco NX-OS Software Lab 3-3: Viewing the tech-supportOperating Cisco NX-OS Software Command Output lineImplementing VLANs and Trunks Lab 4-1: Validating the Physical Understanding the Host-to-HostBuilding a Redundant Switched Topology Connections for FCoE Communications ModelTransitioning to IPv6 Lab 5-1: Exploring the Cisco UCS Describing Ethernet ConnectionsExploring the Routing Process on Cisco Manager GUI Describing Ethernet CommunicationsNexus Switches Lab 5-2: Creating a Service Profile from a StandardsExploring Routing Protocols on Cisco Nexus Template and Performing VMware ESXi Describing OSI Network Layer AddressingSwitches 5.0 SAN Boot Describing the TCP/IP Transport LayerExploring ACLs on Cisco Nexus Switches Describing the Packet Delivery ProcessReviewing the Cisco Nexus Product Family Describing the Packet Delivery ProcessReviewing the Cisco MDS Product Family line Describing Cisco NX-OS SoftwareMonitoring the Cisco Nexus 7000 and 5000 Understanding the Host-to-Host Operating Cisco NX-OS SoftwareSeries Switches Communications Model Implementing VLANs and TrunksDescribing vPCs and Cisco FabricPath in Describing Ethernet Connections Building a Redundant Switched Topology the Data Center Describing Ethernet Communications Transitioning to IPv6 Using OTV on Cisco Nexus 7000 Series Standards Exploring the Routing Process on CiscoSwitches Describing OSI Network Layer Nexus SwitchesVirtualizing Storage Addressing Exploring Routing Protocols on CiscoVirtualizing Server Solutions Describing the TCP/IP Transport Layer Nexus SwitchesUsing the Cisco Nexus 1000V Series Switch Describing the Packet Delivery Process Exploring ACLs on Cisco Nexus Switches Describing Fibre Channel Storage Describing the Packet Delivery Process Reviewing the Cisco Nexus Product FamilyNetworking Describing Cisco NX-OS Software Reviewing the Cisco MDS Product FamilyVerifying Fibre Channel Communications on Operating Cisco NX-OS Software Monitoring the Cisco Nexus 7000 andCisco MDS 9000 Series Multilayer Switches Implementing VLANs and Trunks 5000 Series SwitchesIdentifying Connectivity Options for FCoE on Building a Redundant Switched Topology Describing vPCs and Cisco FabricPath in


the Cisco Nexus 5000 Transitioning to IPv6 the Data CenterDescribing Enhanced FCoE Scalability with Exploring the Routing Process on Cisco Using OTV on Cisco Nexus 7000 SeriesCisco Nexus 2232 10GE Fabric Extenders Nexus Switches Switches Describing the Cisco UCS C-Series Product Exploring Routing Protocols on Cisco Virtualizing StorageFamily Nexus Switches Virtualizing Server SolutionsConnecting Cisco UCS B-Series Blade Exploring ACLs on Cisco Nexus Switches Using the Cisco Nexus 1000V SeriesServers Reviewing the Cisco Nexus Product SwitchSetting up an Initial Cisco UCS B-Series Family Describing Fibre Channel StorageCluster Reviewing the Cisco MDS Product Family NetworkingDescribing Cisco UCS Manager Operations Monitoring the Cisco Nexus 7000 and Verifying Fibre Channel CommunicationsDescribing Cisco UCS Manager Pools, 5000 Series Switches on Cisco MDS 9000 Series MultilayerPolicies, Templates, and Chassis and Blade Describing vPCs and Cisco FabricPath in Switches Power Capping the Data Center Identifying Connectivity Options for FCoELab 1-2: Observing the TCP Three-Way Using OTV on Cisco Nexus 7000 Series on the Cisco Nexus 5000Handshake Switches Describing Enhanced FCoE ScalabilityLab 1-3: Observing Extended PC Network Virtualizing Storage with Cisco Nexus 2232 10GE FabricInformation Virtualizing Server Solutions Extenders Lab 2-1: Connecting to Cisco Nexus Using the Cisco Nexus 1000V Series Describing the Cisco UCS C-SeriesSwitches Switch Product FamilyLab 2-2: Configuring Cisco Nexus Switches Describing Fibre Channel Storage Connecting Cisco UCS B-Series BladeLab 2-3: Configuring VLANs and Trunks Networking ServersLab 2-4: Verifying and Configuring Spanning Verifying Fibre Channel Communications Setting up an Initial Cisco UCS B-SeriesTree on Cisco MDS 9000 Series Multilayer ClusterLab 2-5: Configuring EtherChannel Switches Describing Cisco UCS ManagerLab 3-1: Converting Decimal to Binary and Identifying Connectivity Options for FCoE OperationsBinary to Decimal on the Cisco Nexus 5000 Describing Cisco UCS Manager Pools,Lab 3-2: Classifying Network Addressing Describing Enhanced FCoE Scalability Policies, Templates, and Chassis andLab 3-3: Computing Usable Subnetworks with Cisco Nexus 2232 10GE Fabric Blade Power Capping and Hosts Extenders Lab 1-2: Observing the TCP Three-WayLab 3-4: Calculating Subnet Masks Describing the Cisco UCS C-Series HandshakeLab 4-1: Configuring Multilayer Switching Product Family Lab 1-3: Observing Extended PC NetworkLab 1-2: Connecting to a Cisco Nexus 5000 Connecting Cisco UCS B-Series Blade InformationSeries Switch Using SSH Servers Lab 2-1: Connecting to Cisco NexusLab 1-3: Running CLI Commands Setting up an Initial Cisco UCS B-Series SwitchesLab 1-4: Configuring vPCs Cluster Lab 2-2: Configuring Cisco NexusLab 1-5: Validating Cisco FabricPath Describing Cisco UCS Manager SwitchesConfiguration Operations Lab 2-3: Configuring VLANs and TrunksLab 1-6: Validating OTV Configuration Describing Cisco UCS Manager Pools, Lab 2-4: Verifying and ConfiguringLab 2-1: Verifying Current VDC Settings Policies, Templates, and Chassis and Spanning TreeLab 2-2: Validating a Cisco Nexus 2000 Blade Power Capping Lab 2-5: Configuring EtherChannelSeries Fabric Extender Configuration Lab 1-2: Observing the TCP Three-Way Lab 3-1: Converting Decimal to Binary andLab 2-3: Validating a Cisco Nexus 1000V Handshake Binary to DecimalSeries Switch Configuration Lab 1-3: Observing Extended PC Lab 3-2: Classifying Network AddressingLab 3-1: Validating a Cisco MDS 9100 Network Information Lab 3-3: Computing Usable SubnetworksSeries Multilayer Fabric Switch License Lab 2-1: Connecting to Cisco Nexus and HostsLab 3-2: Configuring VSANs and Zoning Switches Lab 3-4: Calculating Subnet MasksLab 3-3: Validating FLOGI and FCNS Lab 2-2: Configuring Cisco Nexus Lab 4-1: Configuring Multilayer Switching Lab 3-3: Viewing the tech-support Command Switches Lab 1-2: Connecting to a Cisco NexusOutput Lab 2-3: Configuring VLANs and Trunks 5000 Series Switch Using SSHLab 4-1: Validating the Physical Lab 2-4: Verifying and Configuring Lab 1-3: Running CLI CommandsConnections for FCoE Spanning Tree Lab 1-4: Configuring vPCsLab 5-1: Exploring the Cisco UCS Manager Lab 2-5: Configuring EtherChannel Lab 1-5: Validating Cisco FabricPathGUI Lab 3-1: Converting Decimal to Binary ConfigurationLab 5-2: Creating a Service Profile from a and Binary to Decimal Lab 1-6: Validating OTV ConfigurationTemplate and Performing VMware ESXi 5.0 Lab 3-2: Classifying Network Addressing Lab 2-1: Verifying Current VDC SettingsSAN Boot Lab 3-3: Computing Usable Subnetworks Lab 2-2: Validating a Cisco Nexus 2000

and Hosts Series Fabric Extender ConfigurationLab 3-4: Calculating Subnet Masks Lab 2-3: Validating a Cisco Nexus 1000V

line Lab 4-1: Configuring Multilayer Switching Series Switch ConfigurationUnderstanding the Host-to-Host Lab 1-2: Connecting to a Cisco Nexus Lab 3-1: Validating a Cisco MDS 9100Communications Model 5000 Series Switch Using SSH Series Multilayer Fabric Switch LicenseDescribing Ethernet Connections Lab 1-3: Running CLI Commands Lab 3-2: Configuring VSANs and ZoningDescribing Ethernet Communications Lab 1-4: Configuring vPCs Lab 3-3: Validating FLOGI and FCNSStandards Lab 1-5: Validating Cisco FabricPath Lab 3-3: Viewing the tech-supportDescribing OSI Network Layer Addressing Configuration Command Output


Describing the TCP/IP Transport Layer Lab 1-6: Validating OTV Configuration Lab 4-1: Validating the PhysicalDescribing the Packet Delivery Process Lab 2-1: Verifying Current VDC Settings Connections for FCoEDescribing the Packet Delivery Process Lab 2-2: Validating a Cisco Nexus 2000 Lab 5-1: Exploring the Cisco UCSDescribing Cisco NX-OS Software Series Fabric Extender Configuration Manager GUIOperating Cisco NX-OS Software Lab 2-3: Validating a Cisco Nexus 1000V Lab 5-2: Creating a Service Profile from aImplementing VLANs and Trunks Series Switch Configuration Template and Performing VMware ESXiBuilding a Redundant Switched Topology Lab 3-1: Validating a Cisco MDS 9100 5.0 SAN BootTransitioning to IPv6 Series Multilayer Fabric Switch LicenseExploring the Routing Process on Cisco Lab 3-2: Configuring VSANs and ZoningNexus Switches Lab 3-3: Validating FLOGI and FCNS lineExploring Routing Protocols on Cisco Nexus Lab 3-3: Viewing the tech-support Understanding the Host-to-HostSwitches Command Output Communications ModelExploring ACLs on Cisco Nexus Switches Lab 4-1: Validating the Physical Describing Ethernet ConnectionsReviewing the Cisco Nexus Product Family Connections for FCoE Describing Ethernet CommunicationsReviewing the Cisco MDS Product Family Lab 5-1: Exploring the Cisco UCS StandardsMonitoring the Cisco Nexus 7000 and 5000 Manager GUI Describing OSI Network Layer AddressingSeries Switches Lab 5-2: Creating a Service Profile from a Describing the TCP/IP Transport LayerDescribing vPCs and Cisco FabricPath in Template and Performing VMware ESXi Describing the Packet Delivery Processthe Data Center 5.0 SAN Boot Describing the Packet Delivery ProcessUsing OTV on Cisco Nexus 7000 Series Describing Cisco NX-OS SoftwareSwitches Verifying Setup and Operation of the Cisco Operating Cisco NX-OS SoftwareVirtualizing Storage Nexus 1000V Series Implementing VLANs and TrunksVirtualizing Server Solutions line Building a Redundant Switched Topology Using the Cisco Nexus 1000V Series Switch Transitioning to IPv6 Describing Fibre Channel Storage 7: Cisco Data Center Storage Networking Exploring the Routing Process on CiscoNetworking line Nexus SwitchesVerifying Fibre Channel Communications on Comparing Storage-Connectivity Options Exploring Routing Protocols on CiscoCisco MDS 9000 Series Multilayer Switches in the Data Center Nexus SwitchesIdentifying Connectivity Options for FCoE on Exploring ACLs on Cisco Nexus Switches the Cisco Nexus 5000 Reviewing the Cisco Nexus Product FamilyDescribing Enhanced FCoE Scalability with line Reviewing the Cisco MDS Product FamilyCisco Nexus 2232 10GE Fabric Extenders Understanding the Host-to-Host Monitoring the Cisco Nexus 7000 andDescribing the Cisco UCS C-Series Product Communications Model 5000 Series SwitchesFamily Describing Ethernet Connections Describing vPCs and Cisco FabricPath inConnecting Cisco UCS B-Series Blade Describing Ethernet Communications the Data CenterServers Standards Using OTV on Cisco Nexus 7000 SeriesSetting up an Initial Cisco UCS B-Series Describing OSI Network Layer Switches Cluster Addressing Virtualizing StorageDescribing Cisco UCS Manager Operations Describing the TCP/IP Transport Layer Virtualizing Server SolutionsDescribing Cisco UCS Manager Pools, Describing the Packet Delivery Process Using the Cisco Nexus 1000V SeriesPolicies, Templates, and Chassis and Blade Describing the Packet Delivery Process SwitchPower Capping Describing Cisco NX-OS Software Describing Fibre Channel StorageLab 1-2: Observing the TCP Three-Way Operating Cisco NX-OS Software NetworkingHandshake Implementing VLANs and Trunks Verifying Fibre Channel CommunicationsLab 1-3: Observing Extended PC Network Building a Redundant Switched Topology on Cisco MDS 9000 Series MultilayerInformation Transitioning to IPv6 Switches Lab 2-1: Connecting to Cisco Nexus Exploring the Routing Process on Cisco Identifying Connectivity Options for FCoESwitches Nexus Switches on the Cisco Nexus 5000Lab 2-2: Configuring Cisco Nexus Switches Exploring Routing Protocols on Cisco Describing Enhanced FCoE ScalabilityLab 2-3: Configuring VLANs and Trunks Nexus Switches with Cisco Nexus 2232 10GE FabricLab 2-4: Verifying and Configuring Spanning Exploring ACLs on Cisco Nexus Switches Extenders Tree Reviewing the Cisco Nexus Product Describing the Cisco UCS C-SeriesLab 2-5: Configuring EtherChannel Family Product FamilyLab 3-1: Converting Decimal to Binary and Reviewing the Cisco MDS Product Family Connecting Cisco UCS B-Series BladeBinary to Decimal Monitoring the Cisco Nexus 7000 and ServersLab 3-2: Classifying Network Addressing 5000 Series Switches Setting up an Initial Cisco UCS B-SeriesLab 3-3: Computing Usable Subnetworks Describing vPCs and Cisco FabricPath in Clusterand Hosts the Data Center Describing Cisco UCS ManagerLab 3-4: Calculating Subnet Masks Using OTV on Cisco Nexus 7000 Series OperationsLab 4-1: Configuring Multilayer Switching Switches Describing Cisco UCS Manager Pools,Lab 1-2: Connecting to a Cisco Nexus 5000 Virtualizing Storage Policies, Templates, and Chassis andSeries Switch Using SSH Virtualizing Server Solutions Blade Power Capping Lab 1-3: Running CLI Commands Using the Cisco Nexus 1000V Series Lab 1-2: Observing the TCP Three-WayLab 1-4: Configuring vPCs Switch HandshakeLab 1-5: Validating Cisco FabricPath Describing Fibre Channel Storage Lab 1-3: Observing Extended PC Network


Configuration Networking InformationLab 1-6: Validating OTV Configuration Verifying Fibre Channel Communications Lab 2-1: Connecting to Cisco NexusLab 2-1: Verifying Current VDC Settings on Cisco MDS 9000 Series Multilayer SwitchesLab 2-2: Validating a Cisco Nexus 2000 Switches Lab 2-2: Configuring Cisco NexusSeries Fabric Extender Configuration Identifying Connectivity Options for FCoE SwitchesLab 2-3: Validating a Cisco Nexus 1000V on the Cisco Nexus 5000 Lab 2-3: Configuring VLANs and TrunksSeries Switch Configuration Describing Enhanced FCoE Scalability Lab 2-4: Verifying and ConfiguringLab 3-1: Validating a Cisco MDS 9100 with Cisco Nexus 2232 10GE Fabric Spanning TreeSeries Multilayer Fabric Switch License Extenders Lab 2-5: Configuring EtherChannelLab 3-2: Configuring VSANs and Zoning Describing the Cisco UCS C-Series Lab 3-1: Converting Decimal to Binary andLab 3-3: Validating FLOGI and FCNS Product Family Binary to DecimalLab 3-3: Viewing the tech-support Command Connecting Cisco UCS B-Series Blade Lab 3-2: Classifying Network AddressingOutput Servers Lab 3-3: Computing Usable SubnetworksLab 4-1: Validating the Physical Setting up an Initial Cisco UCS B-Series and HostsConnections for FCoE Cluster Lab 3-4: Calculating Subnet MasksLab 5-1: Exploring the Cisco UCS Manager Describing Cisco UCS Manager Lab 4-1: Configuring Multilayer Switching GUI Operations Lab 1-2: Connecting to a Cisco NexusLab 5-2: Creating a Service Profile from a Describing Cisco UCS Manager Pools, 5000 Series Switch Using SSHTemplate and Performing VMware ESXi 5.0 Policies, Templates, and Chassis and Lab 1-3: Running CLI CommandsSAN Boot Blade Power Capping Lab 1-4: Configuring vPCs

Lab 1-2: Observing the TCP Three-Way Lab 1-5: Validating Cisco FabricPathHandshake Configuration

line Lab 1-3: Observing Extended PC Lab 1-6: Validating OTV ConfigurationUnderstanding the Host-to-Host Network Information Lab 2-1: Verifying Current VDC SettingsCommunications Model Lab 2-1: Connecting to Cisco Nexus Lab 2-2: Validating a Cisco Nexus 2000Describing Ethernet Connections Switches Series Fabric Extender ConfigurationDescribing Ethernet Communications Lab 2-2: Configuring Cisco Nexus Lab 2-3: Validating a Cisco Nexus 1000VStandards Switches Series Switch ConfigurationDescribing OSI Network Layer Addressing Lab 2-3: Configuring VLANs and Trunks Lab 3-1: Validating a Cisco MDS 9100Describing the TCP/IP Transport Layer Lab 2-4: Verifying and Configuring Series Multilayer Fabric Switch LicenseDescribing the Packet Delivery Process Spanning Tree Lab 3-2: Configuring VSANs and ZoningDescribing the Packet Delivery Process Lab 2-5: Configuring EtherChannel Lab 3-3: Validating FLOGI and FCNSDescribing Cisco NX-OS Software Lab 3-1: Converting Decimal to Binary Lab 3-3: Viewing the tech-supportOperating Cisco NX-OS Software and Binary to Decimal Command OutputImplementing VLANs and Trunks Lab 3-2: Classifying Network Addressing Lab 4-1: Validating the PhysicalBuilding a Redundant Switched Topology Lab 3-3: Computing Usable Subnetworks Connections for FCoETransitioning to IPv6 and Hosts Lab 5-1: Exploring the Cisco UCSExploring the Routing Process on Cisco Lab 3-4: Calculating Subnet Masks Manager GUINexus Switches Lab 4-1: Configuring Multilayer Switching Lab 5-2: Creating a Service Profile from aExploring Routing Protocols on Cisco Nexus Lab 1-2: Connecting to a Cisco Nexus Template and Performing VMware ESXiSwitches 5000 Series Switch Using SSH 5.0 SAN BootExploring ACLs on Cisco Nexus Switches Lab 1-3: Running CLI CommandsReviewing the Cisco Nexus Product Family Lab 1-4: Configuring vPCsReviewing the Cisco MDS Product Family Lab 1-5: Validating Cisco FabricPath lineMonitoring the Cisco Nexus 7000 and 5000 Configuration Understanding the Host-to-HostSeries Switches Lab 1-6: Validating OTV Configuration Communications ModelDescribing vPCs and Cisco FabricPath in Lab 2-1: Verifying Current VDC Settings Describing Ethernet Connectionsthe Data Center Lab 2-2: Validating a Cisco Nexus 2000 Describing Ethernet CommunicationsUsing OTV on Cisco Nexus 7000 Series Series Fabric Extender Configuration StandardsSwitches Lab 2-3: Validating a Cisco Nexus 1000V Describing OSI Network Layer AddressingVirtualizing Storage Series Switch Configuration Describing the TCP/IP Transport LayerVirtualizing Server Solutions Lab 3-1: Validating a Cisco MDS 9100 Describing the Packet Delivery ProcessUsing the Cisco Nexus 1000V Series Switch Series Multilayer Fabric Switch License Describing the Packet Delivery ProcessDescribing Fibre Channel Storage Lab 3-2: Configuring VSANs and Zoning Describing Cisco NX-OS SoftwareNetworking Lab 3-3: Validating FLOGI and FCNS Operating Cisco NX-OS SoftwareVerifying Fibre Channel Communications on Lab 3-3: Viewing the tech-support Implementing VLANs and TrunksCisco MDS 9000 Series Multilayer Switches Command Output Building a Redundant Switched Topology Identifying Connectivity Options for FCoE on Lab 4-1: Validating the Physical Transitioning to IPv6 the Cisco Nexus 5000 Connections for FCoE Exploring the Routing Process on CiscoDescribing Enhanced FCoE Scalability with Lab 5-1: Exploring the Cisco UCS Nexus SwitchesCisco Nexus 2232 10GE Fabric Extenders Manager GUI Exploring Routing Protocols on CiscoDescribing the Cisco UCS C-Series Product Lab 5-2: Creating a Service Profile from a Nexus SwitchesFamily Template and Performing VMware ESXi Exploring ACLs on Cisco Nexus Switches Connecting Cisco UCS B-Series Blade 5.0 SAN Boot Reviewing the Cisco Nexus Product FamilyServers Reviewing the Cisco MDS Product Family


Setting up an Initial Cisco UCS B-Series Monitoring the Cisco Nexus 7000 andCluster line 5000 Series SwitchesDescribing Cisco UCS Manager Operations Understanding the Host-to-Host Describing vPCs and Cisco FabricPath inDescribing Cisco UCS Manager Pools, Communications Model the Data CenterPolicies, Templates, and Chassis and Blade Describing Ethernet Connections Using OTV on Cisco Nexus 7000 SeriesPower Capping Describing Ethernet Communications Switches Lab 1-2: Observing the TCP Three-Way Standards Virtualizing StorageHandshake Describing OSI Network Layer Virtualizing Server SolutionsLab 1-3: Observing Extended PC Network Addressing Using the Cisco Nexus 1000V SeriesInformation Describing the TCP/IP Transport Layer SwitchLab 2-1: Connecting to Cisco Nexus Describing the Packet Delivery Process Describing Fibre Channel StorageSwitches Describing the Packet Delivery Process NetworkingLab 2-2: Configuring Cisco Nexus Switches Describing Cisco NX-OS Software Verifying Fibre Channel CommunicationsLab 2-3: Configuring VLANs and Trunks Operating Cisco NX-OS Software on Cisco MDS 9000 Series MultilayerLab 2-4: Verifying and Configuring Spanning Implementing VLANs and Trunks Switches Tree Building a Redundant Switched Topology Identifying Connectivity Options for FCoELab 2-5: Configuring EtherChannel Transitioning to IPv6 on the Cisco Nexus 5000Lab 3-1: Converting Decimal to Binary and Exploring the Routing Process on Cisco Describing Enhanced FCoE ScalabilityBinary to Decimal Nexus Switches with Cisco Nexus 2232 10GE FabricLab 3-2: Classifying Network Addressing Exploring Routing Protocols on Cisco Extenders Lab 3-3: Computing Usable Subnetworks Nexus Switches Describing the Cisco UCS C-Seriesand Hosts Exploring ACLs on Cisco Nexus Switches Product FamilyLab 3-4: Calculating Subnet Masks Reviewing the Cisco Nexus Product Connecting Cisco UCS B-Series BladeLab 4-1: Configuring Multilayer Switching Family ServersLab 1-2: Connecting to a Cisco Nexus 5000 Reviewing the Cisco MDS Product Family Setting up an Initial Cisco UCS B-SeriesSeries Switch Using SSH Monitoring the Cisco Nexus 7000 and ClusterLab 1-3: Running CLI Commands 5000 Series Switches Describing Cisco UCS ManagerLab 1-4: Configuring vPCs Describing vPCs and Cisco FabricPath in OperationsLab 1-5: Validating Cisco FabricPath the Data Center Describing Cisco UCS Manager Pools,Configuration Using OTV on Cisco Nexus 7000 Series Policies, Templates, and Chassis andLab 1-6: Validating OTV Configuration Switches Blade Power Capping Lab 2-1: Verifying Current VDC Settings Virtualizing Storage Lab 1-2: Observing the TCP Three-WayLab 2-2: Validating a Cisco Nexus 2000 Virtualizing Server Solutions HandshakeSeries Fabric Extender Configuration Using the Cisco Nexus 1000V Series Lab 1-3: Observing Extended PC NetworkLab 2-3: Validating a Cisco Nexus 1000V Switch InformationSeries Switch Configuration Describing Fibre Channel Storage Lab 2-1: Connecting to Cisco NexusLab 3-1: Validating a Cisco MDS 9100 Networking SwitchesSeries Multilayer Fabric Switch License Verifying Fibre Channel Communications Lab 2-2: Configuring Cisco NexusLab 3-2: Configuring VSANs and Zoning on Cisco MDS 9000 Series Multilayer SwitchesLab 3-3: Validating FLOGI and FCNS Switches Lab 2-3: Configuring VLANs and TrunksLab 3-3: Viewing the tech-support Command Identifying Connectivity Options for FCoE Lab 2-4: Verifying and ConfiguringOutput on the Cisco Nexus 5000 Spanning TreeLab 4-1: Validating the Physical Describing Enhanced FCoE Scalability Lab 2-5: Configuring EtherChannelConnections for FCoE with Cisco Nexus 2232 10GE Fabric Lab 3-1: Converting Decimal to Binary andLab 5-1: Exploring the Cisco UCS Manager Extenders Binary to DecimalGUI Describing the Cisco UCS C-Series Lab 3-2: Classifying Network AddressingLab 5-2: Creating a Service Profile from a Product Family Lab 3-3: Computing Usable SubnetworksTemplate and Performing VMware ESXi 5.0 Connecting Cisco UCS B-Series Blade and HostsSAN Boot Servers Lab 3-4: Calculating Subnet Masks

Setting up an Initial Cisco UCS B-Series Lab 4-1: Configuring Multilayer Switching 2: Switched Network Implementation Cluster Lab 1-2: Connecting to a Cisco Nexusline Describing Cisco UCS Manager 5000 Series Switch Using SSH

Describing Switching Operations Lab 1-3: Running CLI CommandsDescribing Cisco UCS Manager Pools, Lab 1-4: Configuring vPCsPolicies, Templates, and Chassis and Lab 1-5: Validating Cisco FabricPath

line Blade Power Capping ConfigurationUnderstanding the Host-to-Host Lab 1-2: Observing the TCP Three-Way Lab 1-6: Validating OTV ConfigurationCommunications Model Handshake Lab 2-1: Verifying Current VDC SettingsDescribing Ethernet Connections Lab 1-3: Observing Extended PC Lab 2-2: Validating a Cisco Nexus 2000Describing Ethernet Communications Network Information Series Fabric Extender ConfigurationStandards Lab 2-1: Connecting to Cisco Nexus Lab 2-3: Validating a Cisco Nexus 1000VDescribing OSI Network Layer Addressing Switches Series Switch ConfigurationDescribing the TCP/IP Transport Layer Lab 2-2: Configuring Cisco Nexus Lab 3-1: Validating a Cisco MDS 9100Describing the Packet Delivery Process Switches Series Multilayer Fabric Switch LicenseDescribing the Packet Delivery Process Lab 2-3: Configuring VLANs and Trunks Lab 3-2: Configuring VSANs and Zoning


Describing Cisco NX-OS Software Lab 2-4: Verifying and Configuring Lab 3-3: Validating FLOGI and FCNSOperating Cisco NX-OS Software Spanning Tree Lab 3-3: Viewing the tech-supportImplementing VLANs and Trunks Lab 2-5: Configuring EtherChannel Command OutputBuilding a Redundant Switched Topology Lab 3-1: Converting Decimal to Binary Lab 4-1: Validating the PhysicalTransitioning to IPv6 and Binary to Decimal Connections for FCoEExploring the Routing Process on Cisco Lab 3-2: Classifying Network Addressing Lab 5-1: Exploring the Cisco UCSNexus Switches Lab 3-3: Computing Usable Subnetworks Manager GUIExploring Routing Protocols on Cisco Nexus and Hosts Lab 5-2: Creating a Service Profile from aSwitches Lab 3-4: Calculating Subnet Masks Template and Performing VMware ESXiExploring ACLs on Cisco Nexus Switches Lab 4-1: Configuring Multilayer Switching 5.0 SAN BootReviewing the Cisco Nexus Product Family Lab 1-2: Connecting to a Cisco NexusReviewing the Cisco MDS Product Family 5000 Series Switch Using SSHMonitoring the Cisco Nexus 7000 and 5000 Lab 1-3: Running CLI Commands lineSeries Switches Lab 1-4: Configuring vPCs Understanding the Host-to-HostDescribing vPCs and Cisco FabricPath in Lab 1-5: Validating Cisco FabricPath Communications Modelthe Data Center Configuration Describing Ethernet ConnectionsUsing OTV on Cisco Nexus 7000 Series Lab 1-6: Validating OTV Configuration Describing Ethernet CommunicationsSwitches Lab 2-1: Verifying Current VDC Settings StandardsVirtualizing Storage Lab 2-2: Validating a Cisco Nexus 2000 Describing OSI Network Layer AddressingVirtualizing Server Solutions Series Fabric Extender Configuration Describing the TCP/IP Transport LayerUsing the Cisco Nexus 1000V Series Switch Lab 2-3: Validating a Cisco Nexus 1000V Describing the Packet Delivery ProcessDescribing Fibre Channel Storage Series Switch Configuration Describing the Packet Delivery ProcessNetworking Lab 3-1: Validating a Cisco MDS 9100 Describing Cisco NX-OS SoftwareVerifying Fibre Channel Communications on Series Multilayer Fabric Switch License Operating Cisco NX-OS SoftwareCisco MDS 9000 Series Multilayer Switches Lab 3-2: Configuring VSANs and Zoning Implementing VLANs and TrunksIdentifying Connectivity Options for FCoE on Lab 3-3: Validating FLOGI and FCNS Building a Redundant Switched Topology the Cisco Nexus 5000 Lab 3-3: Viewing the tech-support Transitioning to IPv6 Describing Enhanced FCoE Scalability with Command Output Exploring the Routing Process on CiscoCisco Nexus 2232 10GE Fabric Extenders Lab 4-1: Validating the Physical Nexus SwitchesDescribing the Cisco UCS C-Series Product Connections for FCoE Exploring Routing Protocols on CiscoFamily Lab 5-1: Exploring the Cisco UCS Nexus SwitchesConnecting Cisco UCS B-Series Blade Manager GUI Exploring ACLs on Cisco Nexus Switches Servers Lab 5-2: Creating a Service Profile from a Reviewing the Cisco Nexus Product FamilySetting up an Initial Cisco UCS B-Series Template and Performing VMware ESXi Reviewing the Cisco MDS Product FamilyCluster 5.0 SAN Boot Monitoring the Cisco Nexus 7000 andDescribing Cisco UCS Manager Operations 5000 Series SwitchesDescribing Cisco UCS Manager Pools, 8: Cisco Data Center Unified Fabric Describing vPCs and Cisco FabricPath inPolicies, Templates, and Chassis and Blade line the Data CenterPower Capping Describing DCB Using OTV on Cisco Nexus 7000 SeriesLab 1-2: Observing the TCP Three-Way Switches Handshake Virtualizing StorageLab 1-3: Observing Extended PC Network line Virtualizing Server SolutionsInformation Understanding the Host-to-Host Using the Cisco Nexus 1000V SeriesLab 2-1: Connecting to Cisco Nexus Communications Model SwitchSwitches Describing Ethernet Connections Describing Fibre Channel StorageLab 2-2: Configuring Cisco Nexus Switches Describing Ethernet Communications NetworkingLab 2-3: Configuring VLANs and Trunks Standards Verifying Fibre Channel CommunicationsLab 2-4: Verifying and Configuring Spanning Describing OSI Network Layer on Cisco MDS 9000 Series MultilayerTree Addressing Switches Lab 2-5: Configuring EtherChannel Describing the TCP/IP Transport Layer Identifying Connectivity Options for FCoELab 3-1: Converting Decimal to Binary and Describing the Packet Delivery Process on the Cisco Nexus 5000Binary to Decimal Describing the Packet Delivery Process Describing Enhanced FCoE ScalabilityLab 3-2: Classifying Network Addressing Describing Cisco NX-OS Software with Cisco Nexus 2232 10GE FabricLab 3-3: Computing Usable Subnetworks Operating Cisco NX-OS Software Extenders and Hosts Implementing VLANs and Trunks Describing the Cisco UCS C-SeriesLab 3-4: Calculating Subnet Masks Building a Redundant Switched Topology Product FamilyLab 4-1: Configuring Multilayer Switching Transitioning to IPv6 Connecting Cisco UCS B-Series BladeLab 1-2: Connecting to a Cisco Nexus 5000 Exploring the Routing Process on Cisco ServersSeries Switch Using SSH Nexus Switches Setting up an Initial Cisco UCS B-SeriesLab 1-3: Running CLI Commands Exploring Routing Protocols on Cisco ClusterLab 1-4: Configuring vPCs Nexus Switches Describing Cisco UCS ManagerLab 1-5: Validating Cisco FabricPath Exploring ACLs on Cisco Nexus Switches OperationsConfiguration Reviewing the Cisco Nexus Product Describing Cisco UCS Manager Pools,Lab 1-6: Validating OTV Configuration Family Policies, Templates, and Chassis andLab 2-1: Verifying Current VDC Settings Reviewing the Cisco MDS Product Family Blade Power Capping


Lab 2-2: Validating a Cisco Nexus 2000 Monitoring the Cisco Nexus 7000 and Lab 1-2: Observing the TCP Three-WaySeries Fabric Extender Configuration 5000 Series Switches HandshakeLab 2-3: Validating a Cisco Nexus 1000V Describing vPCs and Cisco FabricPath in Lab 1-3: Observing Extended PC NetworkSeries Switch Configuration the Data Center InformationLab 3-1: Validating a Cisco MDS 9100 Using OTV on Cisco Nexus 7000 Series Lab 2-1: Connecting to Cisco NexusSeries Multilayer Fabric Switch License Switches SwitchesLab 3-2: Configuring VSANs and Zoning Virtualizing Storage Lab 2-2: Configuring Cisco NexusLab 3-3: Validating FLOGI and FCNS Virtualizing Server Solutions SwitchesLab 3-3: Viewing the tech-support Command Using the Cisco Nexus 1000V Series Lab 2-3: Configuring VLANs and TrunksOutput Switch Lab 2-4: Verifying and ConfiguringLab 4-1: Validating the Physical Describing Fibre Channel Storage Spanning TreeConnections for FCoE Networking Lab 2-5: Configuring EtherChannelLab 5-1: Exploring the Cisco UCS Manager Verifying Fibre Channel Communications Lab 3-1: Converting Decimal to Binary andGUI on Cisco MDS 9000 Series Multilayer Binary to DecimalLab 5-2: Creating a Service Profile from a Switches Lab 3-2: Classifying Network AddressingTemplate and Performing VMware ESXi 5.0 Identifying Connectivity Options for FCoE Lab 3-3: Computing Usable SubnetworksSAN Boot on the Cisco Nexus 5000 and Hosts

Describing Enhanced FCoE Scalability Lab 3-4: Calculating Subnet Maskswith Cisco Nexus 2232 10GE Fabric Lab 4-1: Configuring Multilayer Switching

line Extenders Lab 1-2: Connecting to a Cisco NexusUnderstanding the Host-to-Host Describing the Cisco UCS C-Series 5000 Series Switch Using SSHCommunications Model Product Family Lab 1-3: Running CLI CommandsDescribing Ethernet Connections Connecting Cisco UCS B-Series Blade Lab 1-4: Configuring vPCsDescribing Ethernet Communications Servers Lab 1-5: Validating Cisco FabricPathStandards Setting up an Initial Cisco UCS B-Series ConfigurationDescribing OSI Network Layer Addressing Cluster Lab 1-6: Validating OTV ConfigurationDescribing the TCP/IP Transport Layer Describing Cisco UCS Manager Lab 2-1: Verifying Current VDC SettingsDescribing the Packet Delivery Process Operations Lab 2-2: Validating a Cisco Nexus 2000Describing the Packet Delivery Process Describing Cisco UCS Manager Pools, Series Fabric Extender ConfigurationDescribing Cisco NX-OS Software Policies, Templates, and Chassis and Lab 2-3: Validating a Cisco Nexus 1000VOperating Cisco NX-OS Software Blade Power Capping Series Switch ConfigurationImplementing VLANs and Trunks Lab 1-2: Observing the TCP Three-Way Lab 3-1: Validating a Cisco MDS 9100Building a Redundant Switched Topology Handshake Series Multilayer Fabric Switch LicenseTransitioning to IPv6 Lab 1-3: Observing Extended PC Lab 3-2: Configuring VSANs and ZoningExploring the Routing Process on Cisco Network Information Lab 3-3: Validating FLOGI and FCNSNexus Switches Lab 2-1: Connecting to Cisco Nexus Lab 3-3: Viewing the tech-supportExploring Routing Protocols on Cisco Nexus Switches Command OutputSwitches Lab 2-2: Configuring Cisco Nexus Lab 4-1: Validating the PhysicalExploring ACLs on Cisco Nexus Switches Switches Connections for FCoEReviewing the Cisco Nexus Product Family Lab 2-3: Configuring VLANs and Trunks Lab 5-1: Exploring the Cisco UCSReviewing the Cisco MDS Product Family Lab 2-4: Verifying and Configuring Manager GUIMonitoring the Cisco Nexus 7000 and 5000 Spanning Tree Lab 5-2: Creating a Service Profile from aSeries Switches Lab 2-5: Configuring EtherChannel Template and Performing VMware ESXiDescribing vPCs and Cisco FabricPath in Lab 3-1: Converting Decimal to Binary 5.0 SAN Bootthe Data Center and Binary to DecimalUsing OTV on Cisco Nexus 7000 Series Lab 3-2: Classifying Network AddressingSwitches Lab 3-3: Computing Usable Subnetworks lineVirtualizing Storage and Hosts Understanding the Host-to-HostVirtualizing Server Solutions Lab 3-4: Calculating Subnet Masks Communications ModelUsing the Cisco Nexus 1000V Series Switch Lab 4-1: Configuring Multilayer Switching Describing Ethernet ConnectionsDescribing Fibre Channel Storage Lab 1-2: Connecting to a Cisco Nexus Describing Ethernet CommunicationsNetworking 5000 Series Switch Using SSH StandardsVerifying Fibre Channel Communications on Lab 1-3: Running CLI Commands Describing OSI Network Layer AddressingCisco MDS 9000 Series Multilayer Switches Lab 1-4: Configuring vPCs Describing the TCP/IP Transport LayerIdentifying Connectivity Options for FCoE on Lab 1-5: Validating Cisco FabricPath Describing the Packet Delivery Processthe Cisco Nexus 5000 Configuration Describing the Packet Delivery ProcessDescribing Enhanced FCoE Scalability with Lab 1-6: Validating OTV Configuration Describing Cisco NX-OS SoftwareCisco Nexus 2232 10GE Fabric Extenders Lab 2-1: Verifying Current VDC Settings Operating Cisco NX-OS SoftwareDescribing the Cisco UCS C-Series Product Lab 2-2: Validating a Cisco Nexus 2000 Implementing VLANs and TrunksFamily Series Fabric Extender Configuration Building a Redundant Switched Topology Connecting Cisco UCS B-Series Blade Lab 2-3: Validating a Cisco Nexus 1000V Transitioning to IPv6 Servers Series Switch Configuration Exploring the Routing Process on CiscoSetting up an Initial Cisco UCS B-Series Lab 3-1: Validating a Cisco MDS 9100 Nexus SwitchesCluster Series Multilayer Fabric Switch License Exploring Routing Protocols on CiscoDescribing Cisco UCS Manager Operations Lab 3-2: Configuring VSANs and Zoning Nexus Switches


Describing Cisco UCS Manager Pools, Lab 3-3: Validating FLOGI and FCNS Exploring ACLs on Cisco Nexus Switches Policies, Templates, and Chassis and Blade Lab 3-3: Viewing the tech-support Reviewing the Cisco Nexus Product FamilyPower Capping Command Output Reviewing the Cisco MDS Product FamilyLab 1-2: Observing the TCP Three-Way Lab 4-1: Validating the Physical Monitoring the Cisco Nexus 7000 andHandshake Connections for FCoE 5000 Series SwitchesLab 1-3: Observing Extended PC Network Lab 5-1: Exploring the Cisco UCS Describing vPCs and Cisco FabricPath inInformation Manager GUI the Data CenterLab 2-1: Connecting to Cisco Nexus Lab 5-2: Creating a Service Profile from a Using OTV on Cisco Nexus 7000 SeriesSwitches Template and Performing VMware ESXi Switches Lab 2-2: Configuring Cisco Nexus Switches 5.0 SAN Boot Virtualizing StorageLab 2-3: Configuring VLANs and Trunks Virtualizing Server SolutionsLab 2-4: Verifying and Configuring Spanning Using the Cisco Nexus 1000V SeriesTree line SwitchLab 2-5: Configuring EtherChannel Understanding the Host-to-Host Describing Fibre Channel StorageLab 3-1: Converting Decimal to Binary and Communications Model NetworkingBinary to Decimal Describing Ethernet Connections Verifying Fibre Channel CommunicationsLab 3-2: Classifying Network Addressing Describing Ethernet Communications on Cisco MDS 9000 Series MultilayerLab 3-3: Computing Usable Subnetworks Standards Switches and Hosts Describing OSI Network Layer Identifying Connectivity Options for FCoELab 3-4: Calculating Subnet Masks Addressing on the Cisco Nexus 5000Lab 4-1: Configuring Multilayer Switching Describing the TCP/IP Transport Layer Describing Enhanced FCoE ScalabilityLab 1-2: Connecting to a Cisco Nexus 5000 Describing the Packet Delivery Process with Cisco Nexus 2232 10GE FabricSeries Switch Using SSH Describing the Packet Delivery Process Extenders Lab 1-3: Running CLI Commands Describing Cisco NX-OS Software Describing the Cisco UCS C-SeriesLab 1-4: Configuring vPCs Operating Cisco NX-OS Software Product FamilyLab 1-5: Validating Cisco FabricPath Implementing VLANs and Trunks Connecting Cisco UCS B-Series BladeConfiguration Building a Redundant Switched Topology ServersLab 1-6: Validating OTV Configuration Transitioning to IPv6 Setting up an Initial Cisco UCS B-SeriesLab 2-1: Verifying Current VDC Settings Exploring the Routing Process on Cisco ClusterLab 2-2: Validating a Cisco Nexus 2000 Nexus Switches Describing Cisco UCS ManagerSeries Fabric Extender Configuration Exploring Routing Protocols on Cisco OperationsLab 2-3: Validating a Cisco Nexus 1000V Nexus Switches Describing Cisco UCS Manager Pools,Series Switch Configuration Exploring ACLs on Cisco Nexus Switches Policies, Templates, and Chassis andLab 3-1: Validating a Cisco MDS 9100 Reviewing the Cisco Nexus Product Blade Power Capping Series Multilayer Fabric Switch License Family Lab 1-2: Observing the TCP Three-WayLab 3-2: Configuring VSANs and Zoning Reviewing the Cisco MDS Product Family HandshakeLab 3-3: Validating FLOGI and FCNS Monitoring the Cisco Nexus 7000 and Lab 1-3: Observing Extended PC NetworkLab 3-3: Viewing the tech-support Command 5000 Series Switches InformationOutput Describing vPCs and Cisco FabricPath in Lab 2-1: Connecting to Cisco NexusLab 4-1: Validating the Physical the Data Center SwitchesConnections for FCoE Using OTV on Cisco Nexus 7000 Series Lab 2-2: Configuring Cisco NexusLab 5-1: Exploring the Cisco UCS Manager Switches SwitchesGUI Virtualizing Storage Lab 2-3: Configuring VLANs and TrunksLab 5-2: Creating a Service Profile from a Virtualizing Server Solutions Lab 2-4: Verifying and ConfiguringTemplate and Performing VMware ESXi 5.0 Using the Cisco Nexus 1000V Series Spanning TreeSAN Boot Switch Lab 2-5: Configuring EtherChannel

Describing Fibre Channel Storage Lab 3-1: Converting Decimal to Binary andNetworking Binary to Decimal

line Verifying Fibre Channel Communications Lab 3-2: Classifying Network AddressingUnderstanding the Host-to-Host on Cisco MDS 9000 Series Multilayer Lab 3-3: Computing Usable SubnetworksCommunications Model Switches and HostsDescribing Ethernet Connections Identifying Connectivity Options for FCoE Lab 3-4: Calculating Subnet MasksDescribing Ethernet Communications on the Cisco Nexus 5000 Lab 4-1: Configuring Multilayer Switching Standards Describing Enhanced FCoE Scalability Lab 1-2: Connecting to a Cisco NexusDescribing OSI Network Layer Addressing with Cisco Nexus 2232 10GE Fabric 5000 Series Switch Using SSHDescribing the TCP/IP Transport Layer Extenders Lab 1-3: Running CLI CommandsDescribing the Packet Delivery Process Describing the Cisco UCS C-Series Lab 1-4: Configuring vPCsDescribing the Packet Delivery Process Product Family Lab 1-5: Validating Cisco FabricPathDescribing Cisco NX-OS Software Connecting Cisco UCS B-Series Blade ConfigurationOperating Cisco NX-OS Software Servers Lab 1-6: Validating OTV ConfigurationImplementing VLANs and Trunks Setting up an Initial Cisco UCS B-Series Lab 2-1: Verifying Current VDC SettingsBuilding a Redundant Switched Topology Cluster Lab 2-2: Validating a Cisco Nexus 2000Transitioning to IPv6 Describing Cisco UCS Manager Series Fabric Extender ConfigurationExploring the Routing Process on Cisco Operations Lab 2-3: Validating a Cisco Nexus 1000VNexus Switches Describing Cisco UCS Manager Pools, Series Switch Configuration


Exploring Routing Protocols on Cisco Nexus Policies, Templates, and Chassis and Lab 3-1: Validating a Cisco MDS 9100Switches Blade Power Capping Series Multilayer Fabric Switch LicenseExploring ACLs on Cisco Nexus Switches Lab 1-2: Observing the TCP Three-Way Lab 3-2: Configuring VSANs and ZoningReviewing the Cisco Nexus Product Family Handshake Lab 3-3: Validating FLOGI and FCNSReviewing the Cisco MDS Product Family Lab 1-3: Observing Extended PC Lab 3-3: Viewing the tech-supportMonitoring the Cisco Nexus 7000 and 5000 Network Information Command OutputSeries Switches Lab 2-1: Connecting to Cisco Nexus Lab 4-1: Validating the PhysicalDescribing vPCs and Cisco FabricPath in Switches Connections for FCoEthe Data Center Lab 2-2: Configuring Cisco Nexus Lab 5-1: Exploring the Cisco UCSUsing OTV on Cisco Nexus 7000 Series Switches Manager GUISwitches Lab 2-3: Configuring VLANs and Trunks Lab 5-2: Creating a Service Profile from aVirtualizing Storage Lab 2-4: Verifying and Configuring Template and Performing VMware ESXiVirtualizing Server Solutions Spanning Tree 5.0 SAN BootUsing the Cisco Nexus 1000V Series Switch Lab 2-5: Configuring EtherChannelDescribing Fibre Channel Storage Lab 3-1: Converting Decimal to Binary Advanced Hands-on Labs:Networking and Binary to Decimal lineVerifying Fibre Channel Communications on Lab 3-2: Classifying Network Addressing Lab 1-1: Connecting to a Cisco NexusCisco MDS 9000 Series Multilayer Switches Lab 3-3: Computing Usable Subnetworks 7000 Series Switch Using SSHIdentifying Connectivity Options for FCoE on and Hoststhe Cisco Nexus 5000 Lab 3-4: Calculating Subnet MasksDescribing Enhanced FCoE Scalability with Lab 4-1: Configuring Multilayer Switching lineCisco Nexus 2232 10GE Fabric Extenders Lab 1-2: Connecting to a Cisco Nexus Understanding the Host-to-HostDescribing the Cisco UCS C-Series Product 5000 Series Switch Using SSH Communications ModelFamily Lab 1-3: Running CLI Commands Describing Ethernet ConnectionsConnecting Cisco UCS B-Series Blade Lab 1-4: Configuring vPCs Describing Ethernet CommunicationsServers Lab 1-5: Validating Cisco FabricPath StandardsSetting up an Initial Cisco UCS B-Series Configuration Describing OSI Network Layer AddressingCluster Lab 1-6: Validating OTV Configuration Describing the TCP/IP Transport LayerDescribing Cisco UCS Manager Operations Lab 2-1: Verifying Current VDC Settings Describing the Packet Delivery ProcessDescribing Cisco UCS Manager Pools, Lab 2-2: Validating a Cisco Nexus 2000 Describing the Packet Delivery ProcessPolicies, Templates, and Chassis and Blade Series Fabric Extender Configuration Describing Cisco NX-OS SoftwarePower Capping Lab 2-3: Validating a Cisco Nexus 1000V Operating Cisco NX-OS SoftwareLab 1-2: Observing the TCP Three-Way Series Switch Configuration Implementing VLANs and TrunksHandshake Lab 3-1: Validating a Cisco MDS 9100 Building a Redundant Switched Topology Lab 1-3: Observing Extended PC Network Series Multilayer Fabric Switch License Transitioning to IPv6 Information Lab 3-2: Configuring VSANs and Zoning Exploring the Routing Process on CiscoLab 2-1: Connecting to Cisco Nexus Lab 3-3: Validating FLOGI and FCNS Nexus SwitchesSwitches Lab 3-3: Viewing the tech-support Exploring Routing Protocols on CiscoLab 2-2: Configuring Cisco Nexus Switches Command Output Nexus SwitchesLab 2-3: Configuring VLANs and Trunks Lab 4-1: Validating the Physical Exploring ACLs on Cisco Nexus Switches Lab 2-4: Verifying and Configuring Spanning Connections for FCoE Reviewing the Cisco Nexus Product FamilyTree Lab 5-1: Exploring the Cisco UCS Reviewing the Cisco MDS Product FamilyLab 2-5: Configuring EtherChannel Manager GUI Monitoring the Cisco Nexus 7000 andLab 3-1: Converting Decimal to Binary and Lab 5-2: Creating a Service Profile from a 5000 Series SwitchesBinary to Decimal Template and Performing VMware ESXi Describing vPCs and Cisco FabricPath inLab 3-2: Classifying Network Addressing 5.0 SAN Boot the Data CenterLab 3-3: Computing Usable Subnetworks Using OTV on Cisco Nexus 7000 Seriesand Hosts 9: Cisco UCS Switches Lab 3-4: Calculating Subnet Masks line Virtualizing StorageLab 4-1: Configuring Multilayer Switching Describing the Cisco UCS B-Series Virtualizing Server SolutionsLab 1-2: Connecting to a Cisco Nexus 5000 Product Family Using the Cisco Nexus 1000V SeriesSeries Switch Using SSH SwitchLab 1-3: Running CLI Commands Describing Fibre Channel StorageLab 1-4: Configuring vPCs line NetworkingLab 1-5: Validating Cisco FabricPath Understanding the Host-to-Host Verifying Fibre Channel CommunicationsConfiguration Communications Model on Cisco MDS 9000 Series MultilayerLab 1-6: Validating OTV Configuration Describing Ethernet Connections Switches Lab 2-1: Verifying Current VDC Settings Describing Ethernet Communications Identifying Connectivity Options for FCoELab 2-2: Validating a Cisco Nexus 2000 Standards on the Cisco Nexus 5000Series Fabric Extender Configuration Describing OSI Network Layer Describing Enhanced FCoE ScalabilityLab 2-3: Validating a Cisco Nexus 1000V Addressing with Cisco Nexus 2232 10GE FabricSeries Switch Configuration Describing the TCP/IP Transport Layer Extenders Lab 3-1: Validating a Cisco MDS 9100 Describing the Packet Delivery Process Describing the Cisco UCS C-SeriesSeries Multilayer Fabric Switch License Describing the Packet Delivery Process Product FamilyLab 3-2: Configuring VSANs and Zoning Describing Cisco NX-OS Software Connecting Cisco UCS B-Series Blade


Lab 3-3: Validating FLOGI and FCNS Operating Cisco NX-OS Software ServersLab 3-3: Viewing the tech-support Command Implementing VLANs and Trunks Setting up an Initial Cisco UCS B-SeriesOutput Building a Redundant Switched Topology ClusterLab 4-1: Validating the Physical Transitioning to IPv6 Describing Cisco UCS ManagerConnections for FCoE Exploring the Routing Process on Cisco OperationsLab 5-1: Exploring the Cisco UCS Manager Nexus Switches Describing Cisco UCS Manager Pools,GUI Exploring Routing Protocols on Cisco Policies, Templates, and Chassis andLab 5-2: Creating a Service Profile from a Nexus Switches Blade Power Capping Template and Performing VMware ESXi 5.0 Exploring ACLs on Cisco Nexus Switches Lab 1-2: Observing the TCP Three-WaySAN Boot Reviewing the Cisco Nexus Product Handshake

Family Lab 1-3: Observing Extended PC NetworkReviewing the Cisco MDS Product Family Information

line Monitoring the Cisco Nexus 7000 and Lab 2-1: Connecting to Cisco NexusUnderstanding the Host-to-Host 5000 Series Switches SwitchesCommunications Model Describing vPCs and Cisco FabricPath in Lab 2-2: Configuring Cisco NexusDescribing Ethernet Connections the Data Center SwitchesDescribing Ethernet Communications Using OTV on Cisco Nexus 7000 Series Lab 2-3: Configuring VLANs and TrunksStandards Switches Lab 2-4: Verifying and ConfiguringDescribing OSI Network Layer Addressing Virtualizing Storage Spanning TreeDescribing the TCP/IP Transport Layer Virtualizing Server Solutions Lab 2-5: Configuring EtherChannelDescribing the Packet Delivery Process Using the Cisco Nexus 1000V Series Lab 3-1: Converting Decimal to Binary andDescribing the Packet Delivery Process Switch Binary to DecimalDescribing Cisco NX-OS Software Describing Fibre Channel Storage Lab 3-2: Classifying Network AddressingOperating Cisco NX-OS Software Networking Lab 3-3: Computing Usable SubnetworksImplementing VLANs and Trunks Verifying Fibre Channel Communications and HostsBuilding a Redundant Switched Topology on Cisco MDS 9000 Series Multilayer Lab 3-4: Calculating Subnet MasksTransitioning to IPv6 Switches Lab 4-1: Configuring Multilayer Switching Exploring the Routing Process on Cisco Identifying Connectivity Options for FCoE Lab 1-2: Connecting to a Cisco NexusNexus Switches on the Cisco Nexus 5000 5000 Series Switch Using SSHExploring Routing Protocols on Cisco Nexus Describing Enhanced FCoE Scalability Lab 1-3: Running CLI CommandsSwitches with Cisco Nexus 2232 10GE Fabric Lab 1-4: Configuring vPCsExploring ACLs on Cisco Nexus Switches Extenders Lab 1-5: Validating Cisco FabricPathReviewing the Cisco Nexus Product Family Describing the Cisco UCS C-Series ConfigurationReviewing the Cisco MDS Product Family Product Family Lab 1-6: Validating OTV ConfigurationMonitoring the Cisco Nexus 7000 and 5000 Connecting Cisco UCS B-Series Blade Lab 2-1: Verifying Current VDC SettingsSeries Switches Servers Lab 2-2: Validating a Cisco Nexus 2000Describing vPCs and Cisco FabricPath in Setting up an Initial Cisco UCS B-Series Series Fabric Extender Configurationthe Data Center Cluster Lab 2-3: Validating a Cisco Nexus 1000VUsing OTV on Cisco Nexus 7000 Series Describing Cisco UCS Manager Series Switch ConfigurationSwitches Operations Lab 3-1: Validating a Cisco MDS 9100Virtualizing Storage Describing Cisco UCS Manager Pools, Series Multilayer Fabric Switch LicenseVirtualizing Server Solutions Policies, Templates, and Chassis and Lab 3-2: Configuring VSANs and ZoningUsing the Cisco Nexus 1000V Series Switch Blade Power Capping Lab 3-3: Validating FLOGI and FCNSDescribing Fibre Channel Storage Lab 1-2: Observing the TCP Three-Way Lab 3-3: Viewing the tech-supportNetworking Handshake Command OutputVerifying Fibre Channel Communications on Lab 1-3: Observing Extended PC Lab 4-1: Validating the PhysicalCisco MDS 9000 Series Multilayer Switches Network Information Connections for FCoEIdentifying Connectivity Options for FCoE on Lab 2-1: Connecting to Cisco Nexus Lab 5-1: Exploring the Cisco UCSthe Cisco Nexus 5000 Switches Manager GUIDescribing Enhanced FCoE Scalability with Lab 2-2: Configuring Cisco Nexus Lab 5-2: Creating a Service Profile from aCisco Nexus 2232 10GE Fabric Extenders Switches Template and Performing VMware ESXiDescribing the Cisco UCS C-Series Product Lab 2-3: Configuring VLANs and Trunks 5.0 SAN BootFamily Lab 2-4: Verifying and ConfiguringConnecting Cisco UCS B-Series Blade Spanning TreeServers Lab 2-5: Configuring EtherChannel lineSetting up an Initial Cisco UCS B-Series Lab 3-1: Converting Decimal to Binary Understanding the Host-to-HostCluster and Binary to Decimal Communications ModelDescribing Cisco UCS Manager Operations Lab 3-2: Classifying Network Addressing Describing Ethernet ConnectionsDescribing Cisco UCS Manager Pools, Lab 3-3: Computing Usable Subnetworks Describing Ethernet CommunicationsPolicies, Templates, and Chassis and Blade and Hosts StandardsPower Capping Lab 3-4: Calculating Subnet Masks Describing OSI Network Layer AddressingLab 1-2: Observing the TCP Three-Way Lab 4-1: Configuring Multilayer Switching Describing the TCP/IP Transport LayerHandshake Lab 1-2: Connecting to a Cisco Nexus Describing the Packet Delivery ProcessLab 1-3: Observing Extended PC Network 5000 Series Switch Using SSH Describing the Packet Delivery ProcessInformation Lab 1-3: Running CLI Commands Describing Cisco NX-OS Software


Lab 2-1: Connecting to Cisco Nexus Lab 1-4: Configuring vPCs Operating Cisco NX-OS SoftwareSwitches Lab 1-5: Validating Cisco FabricPath Implementing VLANs and TrunksLab 2-2: Configuring Cisco Nexus Switches Configuration Building a Redundant Switched Topology Lab 2-3: Configuring VLANs and Trunks Lab 1-6: Validating OTV Configuration Transitioning to IPv6 Lab 2-4: Verifying and Configuring Spanning Lab 2-1: Verifying Current VDC Settings Exploring the Routing Process on CiscoTree Lab 2-2: Validating a Cisco Nexus 2000 Nexus SwitchesLab 2-5: Configuring EtherChannel Series Fabric Extender Configuration Exploring Routing Protocols on CiscoLab 3-1: Converting Decimal to Binary and Lab 2-3: Validating a Cisco Nexus 1000V Nexus SwitchesBinary to Decimal Series Switch Configuration Exploring ACLs on Cisco Nexus Switches Lab 3-2: Classifying Network Addressing Lab 3-1: Validating a Cisco MDS 9100 Reviewing the Cisco Nexus Product FamilyLab 3-3: Computing Usable Subnetworks Series Multilayer Fabric Switch License Reviewing the Cisco MDS Product Familyand Hosts Lab 3-2: Configuring VSANs and Zoning Monitoring the Cisco Nexus 7000 andLab 3-4: Calculating Subnet Masks Lab 3-3: Validating FLOGI and FCNS 5000 Series SwitchesLab 4-1: Configuring Multilayer Switching Lab 3-3: Viewing the tech-support Describing vPCs and Cisco FabricPath inLab 1-2: Connecting to a Cisco Nexus 5000 Command Output the Data CenterSeries Switch Using SSH Lab 4-1: Validating the Physical Using OTV on Cisco Nexus 7000 SeriesLab 1-3: Running CLI Commands Connections for FCoE Switches Lab 1-4: Configuring vPCs Lab 5-1: Exploring the Cisco UCS Virtualizing StorageLab 1-5: Validating Cisco FabricPath Manager GUI Virtualizing Server SolutionsConfiguration Lab 5-2: Creating a Service Profile from a Using the Cisco Nexus 1000V SeriesLab 1-6: Validating OTV Configuration Template and Performing VMware ESXi SwitchLab 2-1: Verifying Current VDC Settings 5.0 SAN Boot Describing Fibre Channel StorageLab 2-2: Validating a Cisco Nexus 2000 NetworkingSeries Fabric Extender Configuration Verifying Fibre Channel CommunicationsLab 2-3: Validating a Cisco Nexus 1000V line on Cisco MDS 9000 Series MultilayerSeries Switch Configuration Understanding the Host-to-Host Switches Lab 3-1: Validating a Cisco MDS 9100 Communications Model Identifying Connectivity Options for FCoESeries Multilayer Fabric Switch License Describing Ethernet Connections on the Cisco Nexus 5000Lab 3-2: Configuring VSANs and Zoning Describing Ethernet Communications Describing Enhanced FCoE ScalabilityLab 3-3: Validating FLOGI and FCNS Standards with Cisco Nexus 2232 10GE FabricLab 3-3: Viewing the tech-support Command Describing OSI Network Layer Extenders Output Addressing Describing the Cisco UCS C-SeriesLab 4-1: Validating the Physical Describing the TCP/IP Transport Layer Product FamilyConnections for FCoE Describing the Packet Delivery Process Connecting Cisco UCS B-Series BladeLab 5-1: Exploring the Cisco UCS Manager Describing the Packet Delivery Process ServersGUI Describing Cisco NX-OS Software Setting up an Initial Cisco UCS B-SeriesLab 5-2: Creating a Service Profile from a Operating Cisco NX-OS Software ClusterTemplate and Performing VMware ESXi 5.0 Implementing VLANs and Trunks Describing Cisco UCS ManagerSAN Boot Building a Redundant Switched Topology Operations

Transitioning to IPv6 Describing Cisco UCS Manager Pools,Exploring the Routing Process on Cisco Policies, Templates, and Chassis and

line Nexus Switches Blade Power Capping Understanding the Host-to-Host Exploring Routing Protocols on Cisco Lab 1-2: Observing the TCP Three-WayCommunications Model Nexus Switches HandshakeDescribing Ethernet Connections Exploring ACLs on Cisco Nexus Switches Lab 1-3: Observing Extended PC NetworkDescribing Ethernet Communications Reviewing the Cisco Nexus Product InformationStandards Family Lab 2-1: Connecting to Cisco NexusDescribing OSI Network Layer Addressing Reviewing the Cisco MDS Product Family SwitchesDescribing the TCP/IP Transport Layer Monitoring the Cisco Nexus 7000 and Lab 2-2: Configuring Cisco NexusDescribing the Packet Delivery Process 5000 Series Switches SwitchesDescribing the Packet Delivery Process Describing vPCs and Cisco FabricPath in Lab 2-3: Configuring VLANs and TrunksDescribing Cisco NX-OS Software the Data Center Lab 2-4: Verifying and ConfiguringOperating Cisco NX-OS Software Using OTV on Cisco Nexus 7000 Series Spanning TreeImplementing VLANs and Trunks Switches Lab 2-5: Configuring EtherChannelBuilding a Redundant Switched Topology Virtualizing Storage Lab 3-1: Converting Decimal to Binary andTransitioning to IPv6 Virtualizing Server Solutions Binary to DecimalExploring the Routing Process on Cisco Using the Cisco Nexus 1000V Series Lab 3-2: Classifying Network AddressingNexus Switches Switch Lab 3-3: Computing Usable SubnetworksExploring Routing Protocols on Cisco Nexus Describing Fibre Channel Storage and HostsSwitches Networking Lab 3-4: Calculating Subnet MasksExploring ACLs on Cisco Nexus Switches Verifying Fibre Channel Communications Lab 4-1: Configuring Multilayer Switching Reviewing the Cisco Nexus Product Family on Cisco MDS 9000 Series Multilayer Lab 1-2: Connecting to a Cisco NexusReviewing the Cisco MDS Product Family Switches 5000 Series Switch Using SSHMonitoring the Cisco Nexus 7000 and 5000 Identifying Connectivity Options for FCoE Lab 1-3: Running CLI CommandsSeries Switches on the Cisco Nexus 5000 Lab 1-4: Configuring vPCs


Describing vPCs and Cisco FabricPath in Describing Enhanced FCoE Scalability Lab 1-5: Validating Cisco FabricPaththe Data Center with Cisco Nexus 2232 10GE Fabric ConfigurationUsing OTV on Cisco Nexus 7000 Series Extenders Lab 1-6: Validating OTV ConfigurationSwitches Describing the Cisco UCS C-Series Lab 2-1: Verifying Current VDC SettingsVirtualizing Storage Product Family Lab 2-2: Validating a Cisco Nexus 2000Virtualizing Server Solutions Connecting Cisco UCS B-Series Blade Series Fabric Extender ConfigurationUsing the Cisco Nexus 1000V Series Switch Servers Lab 2-3: Validating a Cisco Nexus 1000VDescribing Fibre Channel Storage Setting up an Initial Cisco UCS B-Series Series Switch ConfigurationNetworking Cluster Lab 3-1: Validating a Cisco MDS 9100Verifying Fibre Channel Communications on Describing Cisco UCS Manager Series Multilayer Fabric Switch LicenseCisco MDS 9000 Series Multilayer Switches Operations Lab 3-2: Configuring VSANs and ZoningIdentifying Connectivity Options for FCoE on Describing Cisco UCS Manager Pools, Lab 3-3: Validating FLOGI and FCNSthe Cisco Nexus 5000 Policies, Templates, and Chassis and Lab 3-3: Viewing the tech-supportDescribing Enhanced FCoE Scalability with Blade Power Capping Command OutputCisco Nexus 2232 10GE Fabric Extenders Lab 1-2: Observing the TCP Three-Way Lab 4-1: Validating the PhysicalDescribing the Cisco UCS C-Series Product Handshake Connections for FCoEFamily Lab 1-3: Observing Extended PC Lab 5-1: Exploring the Cisco UCSConnecting Cisco UCS B-Series Blade Network Information Manager GUIServers Lab 2-1: Connecting to Cisco Nexus Lab 5-2: Creating a Service Profile from aSetting up an Initial Cisco UCS B-Series Switches Template and Performing VMware ESXiCluster Lab 2-2: Configuring Cisco Nexus 5.0 SAN BootDescribing Cisco UCS Manager Operations SwitchesDescribing Cisco UCS Manager Pools, Lab 2-3: Configuring VLANs and TrunksPolicies, Templates, and Chassis and Blade Lab 2-4: Verifying and Configuring linePower Capping Spanning Tree Understanding the Host-to-HostLab 1-2: Observing the TCP Three-Way Lab 2-5: Configuring EtherChannel Communications ModelHandshake Lab 3-1: Converting Decimal to Binary Describing Ethernet ConnectionsLab 1-3: Observing Extended PC Network and Binary to Decimal Describing Ethernet CommunicationsInformation Lab 3-2: Classifying Network Addressing StandardsLab 2-1: Connecting to Cisco Nexus Lab 3-3: Computing Usable Subnetworks Describing OSI Network Layer AddressingSwitches and Hosts Describing the TCP/IP Transport LayerLab 2-2: Configuring Cisco Nexus Switches Lab 3-4: Calculating Subnet Masks Describing the Packet Delivery ProcessLab 2-3: Configuring VLANs and Trunks Lab 4-1: Configuring Multilayer Switching Describing the Packet Delivery ProcessLab 2-4: Verifying and Configuring Spanning Lab 1-2: Connecting to a Cisco Nexus Describing Cisco NX-OS SoftwareTree 5000 Series Switch Using SSH Operating Cisco NX-OS SoftwareLab 2-5: Configuring EtherChannel Lab 1-3: Running CLI Commands Implementing VLANs and TrunksLab 3-1: Converting Decimal to Binary and Lab 1-4: Configuring vPCs Building a Redundant Switched Topology Binary to Decimal Lab 1-5: Validating Cisco FabricPath Transitioning to IPv6 Lab 3-2: Classifying Network Addressing Configuration Exploring the Routing Process on CiscoLab 3-3: Computing Usable Subnetworks Lab 1-6: Validating OTV Configuration Nexus Switchesand Hosts Lab 2-1: Verifying Current VDC Settings Exploring Routing Protocols on CiscoLab 3-4: Calculating Subnet Masks Lab 2-2: Validating a Cisco Nexus 2000 Nexus SwitchesLab 4-1: Configuring Multilayer Switching Series Fabric Extender Configuration Exploring ACLs on Cisco Nexus Switches Lab 1-2: Connecting to a Cisco Nexus 5000 Lab 2-3: Validating a Cisco Nexus 1000V Reviewing the Cisco Nexus Product FamilySeries Switch Using SSH Series Switch Configuration Reviewing the Cisco MDS Product FamilyLab 1-3: Running CLI Commands Lab 3-1: Validating a Cisco MDS 9100 Monitoring the Cisco Nexus 7000 andLab 1-4: Configuring vPCs Series Multilayer Fabric Switch License 5000 Series SwitchesLab 1-5: Validating Cisco FabricPath Lab 3-2: Configuring VSANs and Zoning Describing vPCs and Cisco FabricPath inConfiguration Lab 3-3: Validating FLOGI and FCNS the Data CenterLab 1-6: Validating OTV Configuration Lab 3-3: Viewing the tech-support Using OTV on Cisco Nexus 7000 SeriesLab 2-1: Verifying Current VDC Settings Command Output Switches Lab 2-2: Validating a Cisco Nexus 2000 Lab 4-1: Validating the Physical Virtualizing StorageSeries Fabric Extender Configuration Connections for FCoE Virtualizing Server SolutionsLab 2-3: Validating a Cisco Nexus 1000V Lab 5-1: Exploring the Cisco UCS Using the Cisco Nexus 1000V SeriesSeries Switch Configuration Manager GUI SwitchLab 3-1: Validating a Cisco MDS 9100 Lab 5-2: Creating a Service Profile from a Describing Fibre Channel StorageSeries Multilayer Fabric Switch License Template and Performing VMware ESXi NetworkingLab 3-2: Configuring VSANs and Zoning 5.0 SAN Boot Verifying Fibre Channel CommunicationsLab 3-3: Validating FLOGI and FCNS on Cisco MDS 9000 Series MultilayerLab 3-3: Viewing the tech-support Command Switches Output line Identifying Connectivity Options for FCoELab 4-1: Validating the Physical Understanding the Host-to-Host on the Cisco Nexus 5000Connections for FCoE Communications Model Describing Enhanced FCoE ScalabilityLab 5-1: Exploring the Cisco UCS Manager Describing Ethernet Connections with Cisco Nexus 2232 10GE FabricGUI Describing Ethernet Communications Extenders


Lab 5-2: Creating a Service Profile from a Standards Describing the Cisco UCS C-SeriesTemplate and Performing VMware ESXi 5.0 Describing OSI Network Layer Product FamilySAN Boot Addressing Connecting Cisco UCS B-Series Blade

Describing the TCP/IP Transport Layer Servers3: IP Addressing Describing the Packet Delivery Process Setting up an Initial Cisco UCS B-Seriesline Describing the Packet Delivery Process Cluster

Describing an IP Addressing Scheme Describing Cisco NX-OS Software Describing Cisco UCS ManagerOperating Cisco NX-OS Software OperationsImplementing VLANs and Trunks Describing Cisco UCS Manager Pools,

line Building a Redundant Switched Topology Policies, Templates, and Chassis andUnderstanding the Host-to-Host Transitioning to IPv6 Blade Power Capping Communications Model Exploring the Routing Process on Cisco Lab 1-2: Observing the TCP Three-WayDescribing Ethernet Connections Nexus Switches HandshakeDescribing Ethernet Communications Exploring Routing Protocols on Cisco Lab 1-3: Observing Extended PC NetworkStandards Nexus Switches InformationDescribing OSI Network Layer Addressing Exploring ACLs on Cisco Nexus Switches Lab 2-1: Connecting to Cisco NexusDescribing the TCP/IP Transport Layer Reviewing the Cisco Nexus Product SwitchesDescribing the Packet Delivery Process Family Lab 2-2: Configuring Cisco NexusDescribing the Packet Delivery Process Reviewing the Cisco MDS Product Family SwitchesDescribing Cisco NX-OS Software Monitoring the Cisco Nexus 7000 and Lab 2-3: Configuring VLANs and TrunksOperating Cisco NX-OS Software 5000 Series Switches Lab 2-4: Verifying and ConfiguringImplementing VLANs and Trunks Describing vPCs and Cisco FabricPath in Spanning TreeBuilding a Redundant Switched Topology the Data Center Lab 2-5: Configuring EtherChannelTransitioning to IPv6 Using OTV on Cisco Nexus 7000 Series Lab 3-1: Converting Decimal to Binary andExploring the Routing Process on Cisco Switches Binary to DecimalNexus Switches Virtualizing Storage Lab 3-2: Classifying Network AddressingExploring Routing Protocols on Cisco Nexus Virtualizing Server Solutions Lab 3-3: Computing Usable SubnetworksSwitches Using the Cisco Nexus 1000V Series and HostsExploring ACLs on Cisco Nexus Switches Switch Lab 3-4: Calculating Subnet MasksReviewing the Cisco Nexus Product Family Describing Fibre Channel Storage Lab 4-1: Configuring Multilayer Switching Reviewing the Cisco MDS Product Family Networking Lab 1-2: Connecting to a Cisco NexusMonitoring the Cisco Nexus 7000 and 5000 Verifying Fibre Channel Communications 5000 Series Switch Using SSHSeries Switches on Cisco MDS 9000 Series Multilayer Lab 1-3: Running CLI CommandsDescribing vPCs and Cisco FabricPath in Switches Lab 1-4: Configuring vPCsthe Data Center Identifying Connectivity Options for FCoE Lab 1-5: Validating Cisco FabricPathUsing OTV on Cisco Nexus 7000 Series on the Cisco Nexus 5000 ConfigurationSwitches Describing Enhanced FCoE Scalability Lab 1-6: Validating OTV ConfigurationVirtualizing Storage with Cisco Nexus 2232 10GE Fabric Lab 2-1: Verifying Current VDC SettingsVirtualizing Server Solutions Extenders Lab 2-2: Validating a Cisco Nexus 2000Using the Cisco Nexus 1000V Series Switch Describing the Cisco UCS C-Series Series Fabric Extender ConfigurationDescribing Fibre Channel Storage Product Family Lab 2-3: Validating a Cisco Nexus 1000VNetworking Connecting Cisco UCS B-Series Blade Series Switch ConfigurationVerifying Fibre Channel Communications on Servers Lab 3-1: Validating a Cisco MDS 9100Cisco MDS 9000 Series Multilayer Switches Setting up an Initial Cisco UCS B-Series Series Multilayer Fabric Switch LicenseIdentifying Connectivity Options for FCoE on Cluster Lab 3-2: Configuring VSANs and Zoningthe Cisco Nexus 5000 Describing Cisco UCS Manager Lab 3-3: Validating FLOGI and FCNSDescribing Enhanced FCoE Scalability with Operations Lab 3-3: Viewing the tech-supportCisco Nexus 2232 10GE Fabric Extenders Describing Cisco UCS Manager Pools, Command OutputDescribing the Cisco UCS C-Series Product Policies, Templates, and Chassis and Lab 4-1: Validating the PhysicalFamily Blade Power Capping Connections for FCoEConnecting Cisco UCS B-Series Blade Lab 1-2: Observing the TCP Three-Way Lab 5-1: Exploring the Cisco UCSServers Handshake Manager GUISetting up an Initial Cisco UCS B-Series Lab 1-3: Observing Extended PC Lab 5-2: Creating a Service Profile from aCluster Network Information Template and Performing VMware ESXiDescribing Cisco UCS Manager Operations Lab 2-1: Connecting to Cisco Nexus 5.0 SAN BootDescribing Cisco UCS Manager Pools, SwitchesPolicies, Templates, and Chassis and Blade Lab 2-2: Configuring Cisco NexusPower Capping Switches lineLab 1-2: Observing the TCP Three-Way Lab 2-3: Configuring VLANs and Trunks Understanding the Host-to-HostHandshake Lab 2-4: Verifying and Configuring Communications ModelLab 1-3: Observing Extended PC Network Spanning Tree Describing Ethernet ConnectionsInformation Lab 2-5: Configuring EtherChannel Describing Ethernet CommunicationsLab 2-1: Connecting to Cisco Nexus Lab 3-1: Converting Decimal to Binary StandardsSwitches and Binary to Decimal Describing OSI Network Layer AddressingLab 2-2: Configuring Cisco Nexus Switches Lab 3-2: Classifying Network Addressing Describing the TCP/IP Transport Layer


Lab 2-3: Configuring VLANs and Trunks Lab 3-3: Computing Usable Subnetworks Describing the Packet Delivery ProcessLab 2-4: Verifying and Configuring Spanning and Hosts Describing the Packet Delivery ProcessTree Lab 3-4: Calculating Subnet Masks Describing Cisco NX-OS SoftwareLab 2-5: Configuring EtherChannel Lab 4-1: Configuring Multilayer Switching Operating Cisco NX-OS SoftwareLab 3-1: Converting Decimal to Binary and Lab 1-2: Connecting to a Cisco Nexus Implementing VLANs and TrunksBinary to Decimal 5000 Series Switch Using SSH Building a Redundant Switched Topology Lab 3-2: Classifying Network Addressing Lab 1-3: Running CLI Commands Transitioning to IPv6 Lab 3-3: Computing Usable Subnetworks Lab 1-4: Configuring vPCs Exploring the Routing Process on Ciscoand Hosts Lab 1-5: Validating Cisco FabricPath Nexus SwitchesLab 3-4: Calculating Subnet Masks Configuration Exploring Routing Protocols on CiscoLab 4-1: Configuring Multilayer Switching Lab 1-6: Validating OTV Configuration Nexus SwitchesLab 1-2: Connecting to a Cisco Nexus 5000 Lab 2-1: Verifying Current VDC Settings Exploring ACLs on Cisco Nexus Switches Series Switch Using SSH Lab 2-2: Validating a Cisco Nexus 2000 Reviewing the Cisco Nexus Product FamilyLab 1-3: Running CLI Commands Series Fabric Extender Configuration Reviewing the Cisco MDS Product FamilyLab 1-4: Configuring vPCs Lab 2-3: Validating a Cisco Nexus 1000V Monitoring the Cisco Nexus 7000 andLab 1-5: Validating Cisco FabricPath Series Switch Configuration 5000 Series SwitchesConfiguration Lab 3-1: Validating a Cisco MDS 9100 Describing vPCs and Cisco FabricPath inLab 1-6: Validating OTV Configuration Series Multilayer Fabric Switch License the Data CenterLab 2-1: Verifying Current VDC Settings Lab 3-2: Configuring VSANs and Zoning Using OTV on Cisco Nexus 7000 SeriesLab 2-2: Validating a Cisco Nexus 2000 Lab 3-3: Validating FLOGI and FCNS Switches Series Fabric Extender Configuration Lab 3-3: Viewing the tech-support Virtualizing StorageLab 2-3: Validating a Cisco Nexus 1000V Command Output Virtualizing Server SolutionsSeries Switch Configuration Lab 4-1: Validating the Physical Using the Cisco Nexus 1000V SeriesLab 3-1: Validating a Cisco MDS 9100 Connections for FCoE SwitchSeries Multilayer Fabric Switch License Lab 5-1: Exploring the Cisco UCS Describing Fibre Channel StorageLab 3-2: Configuring VSANs and Zoning Manager GUI NetworkingLab 3-3: Validating FLOGI and FCNS Lab 5-2: Creating a Service Profile from a Verifying Fibre Channel CommunicationsLab 3-3: Viewing the tech-support Command Template and Performing VMware ESXi on Cisco MDS 9000 Series MultilayerOutput 5.0 SAN Boot Switches Lab 4-1: Validating the Physical Identifying Connectivity Options for FCoEConnections for FCoE on the Cisco Nexus 5000Lab 5-1: Exploring the Cisco UCS Manager line Describing Enhanced FCoE ScalabilityGUI Understanding the Host-to-Host with Cisco Nexus 2232 10GE FabricLab 5-2: Creating a Service Profile from a Communications Model Extenders Template and Performing VMware ESXi 5.0 Describing Ethernet Connections Describing the Cisco UCS C-SeriesSAN Boot Describing Ethernet Communications Product Family

Standards Connecting Cisco UCS B-Series Blade4: Routing on the Cisco Nexus Switch Describing OSI Network Layer Serversline Addressing Setting up an Initial Cisco UCS B-Series

Exploring the Packet Delivery Process Describing the TCP/IP Transport Layer ClusterDescribing the Packet Delivery Process Describing Cisco UCS ManagerDescribing the Packet Delivery Process Operations

line Describing Cisco NX-OS Software Describing Cisco UCS Manager Pools,Understanding the Host-to-Host Operating Cisco NX-OS Software Policies, Templates, and Chassis andCommunications Model Implementing VLANs and Trunks Blade Power Capping Describing Ethernet Connections Building a Redundant Switched Topology Lab 1-2: Observing the TCP Three-WayDescribing Ethernet Communications Transitioning to IPv6 HandshakeStandards Exploring the Routing Process on Cisco Lab 1-3: Observing Extended PC NetworkDescribing OSI Network Layer Addressing Nexus Switches InformationDescribing the TCP/IP Transport Layer Exploring Routing Protocols on Cisco Lab 2-1: Connecting to Cisco NexusDescribing the Packet Delivery Process Nexus Switches SwitchesDescribing the Packet Delivery Process Exploring ACLs on Cisco Nexus Switches Lab 2-2: Configuring Cisco NexusDescribing Cisco NX-OS Software Reviewing the Cisco Nexus Product SwitchesOperating Cisco NX-OS Software Family Lab 2-3: Configuring VLANs and TrunksImplementing VLANs and Trunks Reviewing the Cisco MDS Product Family Lab 2-4: Verifying and ConfiguringBuilding a Redundant Switched Topology Monitoring the Cisco Nexus 7000 and Spanning TreeTransitioning to IPv6 5000 Series Switches Lab 2-5: Configuring EtherChannelExploring the Routing Process on Cisco Describing vPCs and Cisco FabricPath in Lab 3-1: Converting Decimal to Binary andNexus Switches the Data Center Binary to DecimalExploring Routing Protocols on Cisco Nexus Using OTV on Cisco Nexus 7000 Series Lab 3-2: Classifying Network AddressingSwitches Switches Lab 3-3: Computing Usable SubnetworksExploring ACLs on Cisco Nexus Switches Virtualizing Storage and HostsReviewing the Cisco Nexus Product Family Virtualizing Server Solutions Lab 3-4: Calculating Subnet MasksReviewing the Cisco MDS Product Family Using the Cisco Nexus 1000V Series Lab 4-1: Configuring Multilayer Switching Monitoring the Cisco Nexus 7000 and 5000 Switch Lab 1-2: Connecting to a Cisco Nexus


Series Switches Describing Fibre Channel Storage 5000 Series Switch Using SSHDescribing vPCs and Cisco FabricPath in Networking Lab 1-3: Running CLI Commandsthe Data Center Verifying Fibre Channel Communications Lab 1-4: Configuring vPCsUsing OTV on Cisco Nexus 7000 Series on Cisco MDS 9000 Series Multilayer Lab 1-5: Validating Cisco FabricPathSwitches Switches ConfigurationVirtualizing Storage Identifying Connectivity Options for FCoE Lab 1-6: Validating OTV ConfigurationVirtualizing Server Solutions on the Cisco Nexus 5000 Lab 2-1: Verifying Current VDC SettingsUsing the Cisco Nexus 1000V Series Switch Describing Enhanced FCoE Scalability Lab 2-2: Validating a Cisco Nexus 2000Describing Fibre Channel Storage with Cisco Nexus 2232 10GE Fabric Series Fabric Extender ConfigurationNetworking Extenders Lab 2-3: Validating a Cisco Nexus 1000VVerifying Fibre Channel Communications on Describing the Cisco UCS C-Series Series Switch ConfigurationCisco MDS 9000 Series Multilayer Switches Product Family Lab 3-1: Validating a Cisco MDS 9100Identifying Connectivity Options for FCoE on Connecting Cisco UCS B-Series Blade Series Multilayer Fabric Switch Licensethe Cisco Nexus 5000 Servers Lab 3-2: Configuring VSANs and ZoningDescribing Enhanced FCoE Scalability with Setting up an Initial Cisco UCS B-Series Lab 3-3: Validating FLOGI and FCNSCisco Nexus 2232 10GE Fabric Extenders Cluster Lab 3-3: Viewing the tech-supportDescribing the Cisco UCS C-Series Product Describing Cisco UCS Manager Command OutputFamily Operations Lab 4-1: Validating the PhysicalConnecting Cisco UCS B-Series Blade Describing Cisco UCS Manager Pools, Connections for FCoEServers Policies, Templates, and Chassis and Lab 5-1: Exploring the Cisco UCSSetting up an Initial Cisco UCS B-Series Blade Power Capping Manager GUICluster Lab 1-2: Observing the TCP Three-Way Lab 5-2: Creating a Service Profile from aDescribing Cisco UCS Manager Operations Handshake Template and Performing VMware ESXiDescribing Cisco UCS Manager Pools, Lab 1-3: Observing Extended PC 5.0 SAN BootPolicies, Templates, and Chassis and Blade Network InformationPower Capping Lab 2-1: Connecting to Cisco NexusLab 1-2: Observing the TCP Three-Way Switches lineHandshake Lab 2-2: Configuring Cisco Nexus Understanding the Host-to-HostLab 1-3: Observing Extended PC Network Switches Communications ModelInformation Lab 2-3: Configuring VLANs and Trunks Describing Ethernet ConnectionsLab 2-1: Connecting to Cisco Nexus Lab 2-4: Verifying and Configuring Describing Ethernet CommunicationsSwitches Spanning Tree StandardsLab 2-2: Configuring Cisco Nexus Switches Lab 2-5: Configuring EtherChannel Describing OSI Network Layer AddressingLab 2-3: Configuring VLANs and Trunks Lab 3-1: Converting Decimal to Binary Describing the TCP/IP Transport LayerLab 2-4: Verifying and Configuring Spanning and Binary to Decimal Describing the Packet Delivery ProcessTree Lab 3-2: Classifying Network Addressing Describing the Packet Delivery ProcessLab 2-5: Configuring EtherChannel Lab 3-3: Computing Usable Subnetworks Describing Cisco NX-OS SoftwareLab 3-1: Converting Decimal to Binary and and Hosts Operating Cisco NX-OS SoftwareBinary to Decimal Lab 3-4: Calculating Subnet Masks Implementing VLANs and TrunksLab 3-2: Classifying Network Addressing Lab 4-1: Configuring Multilayer Switching Building a Redundant Switched Topology Lab 3-3: Computing Usable Subnetworks Lab 1-2: Connecting to a Cisco Nexus Transitioning to IPv6 and Hosts 5000 Series Switch Using SSH Exploring the Routing Process on CiscoLab 3-4: Calculating Subnet Masks Lab 1-3: Running CLI Commands Nexus SwitchesLab 4-1: Configuring Multilayer Switching Lab 1-4: Configuring vPCs Exploring Routing Protocols on CiscoLab 1-2: Connecting to a Cisco Nexus 5000 Lab 1-5: Validating Cisco FabricPath Nexus SwitchesSeries Switch Using SSH Configuration Exploring ACLs on Cisco Nexus Switches Lab 1-3: Running CLI Commands Lab 1-6: Validating OTV Configuration Reviewing the Cisco Nexus Product FamilyLab 1-4: Configuring vPCs Lab 2-1: Verifying Current VDC Settings Reviewing the Cisco MDS Product FamilyLab 1-5: Validating Cisco FabricPath Lab 2-2: Validating a Cisco Nexus 2000 Monitoring the Cisco Nexus 7000 andConfiguration Series Fabric Extender Configuration 5000 Series SwitchesLab 1-6: Validating OTV Configuration Lab 2-3: Validating a Cisco Nexus 1000V Describing vPCs and Cisco FabricPath inLab 2-1: Verifying Current VDC Settings Series Switch Configuration the Data CenterLab 2-2: Validating a Cisco Nexus 2000 Lab 3-1: Validating a Cisco MDS 9100 Using OTV on Cisco Nexus 7000 SeriesSeries Fabric Extender Configuration Series Multilayer Fabric Switch License Switches Lab 2-3: Validating a Cisco Nexus 1000V Lab 3-2: Configuring VSANs and Zoning Virtualizing StorageSeries Switch Configuration Lab 3-3: Validating FLOGI and FCNS Virtualizing Server SolutionsLab 3-1: Validating a Cisco MDS 9100 Lab 3-3: Viewing the tech-support Using the Cisco Nexus 1000V SeriesSeries Multilayer Fabric Switch License Command Output SwitchLab 3-2: Configuring VSANs and Zoning Lab 4-1: Validating the Physical Describing Fibre Channel StorageLab 3-3: Validating FLOGI and FCNS Connections for FCoE NetworkingLab 3-3: Viewing the tech-support Command Lab 5-1: Exploring the Cisco UCS Verifying Fibre Channel CommunicationsOutput Manager GUI on Cisco MDS 9000 Series MultilayerLab 4-1: Validating the Physical Lab 5-2: Creating a Service Profile from a Switches Connections for FCoE Template and Performing VMware ESXi Identifying Connectivity Options for FCoELab 5-1: Exploring the Cisco UCS Manager 5.0 SAN Boot on the Cisco Nexus 5000


GUI Describing Enhanced FCoE ScalabilityLab 5-2: Creating a Service Profile from a with Cisco Nexus 2232 10GE FabricTemplate and Performing VMware ESXi 5.0 line Extenders SAN Boot Understanding the Host-to-Host Describing the Cisco UCS C-Series

Communications Model Product FamilyDescribing Ethernet Connections Connecting Cisco UCS B-Series Blade

line Describing Ethernet Communications ServersUnderstanding the Host-to-Host Standards Setting up an Initial Cisco UCS B-SeriesCommunications Model Describing OSI Network Layer ClusterDescribing Ethernet Connections Addressing Describing Cisco UCS ManagerDescribing Ethernet Communications Describing the TCP/IP Transport Layer OperationsStandards Describing the Packet Delivery Process Describing Cisco UCS Manager Pools,Describing OSI Network Layer Addressing Describing the Packet Delivery Process Policies, Templates, and Chassis andDescribing the TCP/IP Transport Layer Describing Cisco NX-OS Software Blade Power Capping Describing the Packet Delivery Process Operating Cisco NX-OS Software Lab 1-2: Observing the TCP Three-WayDescribing the Packet Delivery Process Implementing VLANs and Trunks HandshakeDescribing Cisco NX-OS Software Building a Redundant Switched Topology Lab 1-3: Observing Extended PC NetworkOperating Cisco NX-OS Software Transitioning to IPv6 InformationImplementing VLANs and Trunks Exploring the Routing Process on Cisco Lab 2-1: Connecting to Cisco NexusBuilding a Redundant Switched Topology Nexus Switches SwitchesTransitioning to IPv6 Exploring Routing Protocols on Cisco Lab 2-2: Configuring Cisco NexusExploring the Routing Process on Cisco Nexus Switches SwitchesNexus Switches Exploring ACLs on Cisco Nexus Switches Lab 2-3: Configuring VLANs and TrunksExploring Routing Protocols on Cisco Nexus Reviewing the Cisco Nexus Product Lab 2-4: Verifying and ConfiguringSwitches Family Spanning TreeExploring ACLs on Cisco Nexus Switches Reviewing the Cisco MDS Product Family Lab 2-5: Configuring EtherChannelReviewing the Cisco Nexus Product Family Monitoring the Cisco Nexus 7000 and Lab 3-1: Converting Decimal to Binary andReviewing the Cisco MDS Product Family 5000 Series Switches Binary to DecimalMonitoring the Cisco Nexus 7000 and 5000 Describing vPCs and Cisco FabricPath in Lab 3-2: Classifying Network AddressingSeries Switches the Data Center Lab 3-3: Computing Usable SubnetworksDescribing vPCs and Cisco FabricPath in Using OTV on Cisco Nexus 7000 Series and Hoststhe Data Center Switches Lab 3-4: Calculating Subnet MasksUsing OTV on Cisco Nexus 7000 Series Virtualizing Storage Lab 4-1: Configuring Multilayer Switching Switches Virtualizing Server Solutions Lab 1-2: Connecting to a Cisco NexusVirtualizing Storage Using the Cisco Nexus 1000V Series 5000 Series Switch Using SSHVirtualizing Server Solutions Switch Lab 1-3: Running CLI CommandsUsing the Cisco Nexus 1000V Series Switch Describing Fibre Channel Storage Lab 1-4: Configuring vPCsDescribing Fibre Channel Storage Networking Lab 1-5: Validating Cisco FabricPathNetworking Verifying Fibre Channel Communications ConfigurationVerifying Fibre Channel Communications on on Cisco MDS 9000 Series Multilayer Lab 1-6: Validating OTV ConfigurationCisco MDS 9000 Series Multilayer Switches Switches Lab 2-1: Verifying Current VDC SettingsIdentifying Connectivity Options for FCoE on Identifying Connectivity Options for FCoE Lab 2-2: Validating a Cisco Nexus 2000the Cisco Nexus 5000 on the Cisco Nexus 5000 Series Fabric Extender ConfigurationDescribing Enhanced FCoE Scalability with Describing Enhanced FCoE Scalability Lab 2-3: Validating a Cisco Nexus 1000VCisco Nexus 2232 10GE Fabric Extenders with Cisco Nexus 2232 10GE Fabric Series Switch ConfigurationDescribing the Cisco UCS C-Series Product Extenders Lab 3-1: Validating a Cisco MDS 9100Family Describing the Cisco UCS C-Series Series Multilayer Fabric Switch LicenseConnecting Cisco UCS B-Series Blade Product Family Lab 3-2: Configuring VSANs and ZoningServers Connecting Cisco UCS B-Series Blade Lab 3-3: Validating FLOGI and FCNSSetting up an Initial Cisco UCS B-Series Servers Lab 3-3: Viewing the tech-supportCluster Setting up an Initial Cisco UCS B-Series Command OutputDescribing Cisco UCS Manager Operations Cluster Lab 4-1: Validating the PhysicalDescribing Cisco UCS Manager Pools, Describing Cisco UCS Manager Connections for FCoEPolicies, Templates, and Chassis and Blade Operations Lab 5-1: Exploring the Cisco UCSPower Capping Describing Cisco UCS Manager Pools, Manager GUILab 1-2: Observing the TCP Three-Way Policies, Templates, and Chassis and Lab 5-2: Creating a Service Profile from aHandshake Blade Power Capping Template and Performing VMware ESXiLab 1-3: Observing Extended PC Network Lab 1-2: Observing the TCP Three-Way 5.0 SAN BootInformation HandshakeLab 2-1: Connecting to Cisco Nexus Lab 1-3: Observing Extended PCSwitches Network Information lineLab 2-2: Configuring Cisco Nexus Switches Lab 2-1: Connecting to Cisco Nexus Understanding the Host-to-HostLab 2-3: Configuring VLANs and Trunks Switches Communications ModelLab 2-4: Verifying and Configuring Spanning Lab 2-2: Configuring Cisco Nexus Describing Ethernet ConnectionsTree Switches Describing Ethernet Communications


Lab 2-5: Configuring EtherChannel Lab 2-3: Configuring VLANs and Trunks StandardsLab 3-1: Converting Decimal to Binary and Lab 2-4: Verifying and Configuring Describing OSI Network Layer AddressingBinary to Decimal Spanning Tree Describing the TCP/IP Transport LayerLab 3-2: Classifying Network Addressing Lab 2-5: Configuring EtherChannel Describing the Packet Delivery ProcessLab 3-3: Computing Usable Subnetworks Lab 3-1: Converting Decimal to Binary Describing the Packet Delivery Processand Hosts and Binary to Decimal Describing Cisco NX-OS SoftwareLab 3-4: Calculating Subnet Masks Lab 3-2: Classifying Network Addressing Operating Cisco NX-OS SoftwareLab 4-1: Configuring Multilayer Switching Lab 3-3: Computing Usable Subnetworks Implementing VLANs and TrunksLab 1-2: Connecting to a Cisco Nexus 5000 and Hosts Building a Redundant Switched Topology Series Switch Using SSH Lab 3-4: Calculating Subnet Masks Transitioning to IPv6 Lab 1-3: Running CLI Commands Lab 4-1: Configuring Multilayer Switching Exploring the Routing Process on CiscoLab 1-4: Configuring vPCs Lab 1-2: Connecting to a Cisco Nexus Nexus SwitchesLab 1-5: Validating Cisco FabricPath 5000 Series Switch Using SSH Exploring Routing Protocols on CiscoConfiguration Lab 1-3: Running CLI Commands Nexus SwitchesLab 1-6: Validating OTV Configuration Lab 1-4: Configuring vPCs Exploring ACLs on Cisco Nexus Switches Lab 2-1: Verifying Current VDC Settings Lab 1-5: Validating Cisco FabricPath Reviewing the Cisco Nexus Product FamilyLab 2-2: Validating a Cisco Nexus 2000 Configuration Reviewing the Cisco MDS Product FamilySeries Fabric Extender Configuration Lab 1-6: Validating OTV Configuration Monitoring the Cisco Nexus 7000 andLab 2-3: Validating a Cisco Nexus 1000V Lab 2-1: Verifying Current VDC Settings 5000 Series SwitchesSeries Switch Configuration Lab 2-2: Validating a Cisco Nexus 2000 Describing vPCs and Cisco FabricPath inLab 3-1: Validating a Cisco MDS 9100 Series Fabric Extender Configuration the Data CenterSeries Multilayer Fabric Switch License Lab 2-3: Validating a Cisco Nexus 1000V Using OTV on Cisco Nexus 7000 SeriesLab 3-2: Configuring VSANs and Zoning Series Switch Configuration Switches Lab 3-3: Validating FLOGI and FCNS Lab 3-1: Validating a Cisco MDS 9100 Virtualizing StorageLab 3-3: Viewing the tech-support Command Series Multilayer Fabric Switch License Virtualizing Server SolutionsOutput Lab 3-2: Configuring VSANs and Zoning Using the Cisco Nexus 1000V SeriesLab 4-1: Validating the Physical Lab 3-3: Validating FLOGI and FCNS SwitchConnections for FCoE Lab 3-3: Viewing the tech-support Describing Fibre Channel StorageLab 5-1: Exploring the Cisco UCS Manager Command Output NetworkingGUI Lab 4-1: Validating the Physical Verifying Fibre Channel CommunicationsLab 5-2: Creating a Service Profile from a Connections for FCoE on Cisco MDS 9000 Series MultilayerTemplate and Performing VMware ESXi 5.0 Lab 5-1: Exploring the Cisco UCS Switches SAN Boot Manager GUI Identifying Connectivity Options for FCoE

Lab 5-2: Creating a Service Profile from a on the Cisco Nexus 5000Template and Performing VMware ESXi Describing Enhanced FCoE Scalability

line 5.0 SAN Boot with Cisco Nexus 2232 10GE FabricUnderstanding the Host-to-Host Extenders Communications Model Labs Describing the Cisco UCS C-SeriesDescribing Ethernet Connections line Product FamilyDescribing Ethernet Communications Connecting Cisco UCS B-Series BladeStandards Introduction labs: ServersDescribing OSI Network Layer Addressing line Setting up an Initial Cisco UCS B-SeriesDescribing the TCP/IP Transport Layer Lab 1-1: Using Windows Applications as ClusterDescribing the Packet Delivery Process Network Tools Describing Cisco UCS ManagerDescribing the Packet Delivery Process OperationsDescribing Cisco NX-OS Software Describing Cisco UCS Manager Pools,Operating Cisco NX-OS Software line Policies, Templates, and Chassis andImplementing VLANs and Trunks Understanding the Host-to-Host Blade Power Capping Building a Redundant Switched Topology Communications Model Lab 1-2: Observing the TCP Three-WayTransitioning to IPv6 Describing Ethernet Connections HandshakeExploring the Routing Process on Cisco Describing Ethernet Communications Lab 1-3: Observing Extended PC NetworkNexus Switches Standards InformationExploring Routing Protocols on Cisco Nexus Describing OSI Network Layer Lab 2-1: Connecting to Cisco NexusSwitches Addressing SwitchesExploring ACLs on Cisco Nexus Switches Describing the TCP/IP Transport Layer Lab 2-2: Configuring Cisco NexusReviewing the Cisco Nexus Product Family Describing the Packet Delivery Process SwitchesReviewing the Cisco MDS Product Family Describing the Packet Delivery Process Lab 2-3: Configuring VLANs and TrunksMonitoring the Cisco Nexus 7000 and 5000 Describing Cisco NX-OS Software Lab 2-4: Verifying and ConfiguringSeries Switches Operating Cisco NX-OS Software Spanning TreeDescribing vPCs and Cisco FabricPath in Implementing VLANs and Trunks Lab 2-5: Configuring EtherChannelthe Data Center Building a Redundant Switched Topology Lab 3-1: Converting Decimal to Binary andUsing OTV on Cisco Nexus 7000 Series Transitioning to IPv6 Binary to DecimalSwitches Exploring the Routing Process on Cisco Lab 3-2: Classifying Network AddressingVirtualizing Storage Nexus Switches Lab 3-3: Computing Usable SubnetworksVirtualizing Server Solutions Exploring Routing Protocols on Cisco and Hosts


Using the Cisco Nexus 1000V Series Switch Nexus Switches Lab 3-4: Calculating Subnet MasksDescribing Fibre Channel Storage Exploring ACLs on Cisco Nexus Switches Lab 4-1: Configuring Multilayer Switching Networking Reviewing the Cisco Nexus Product Lab 1-2: Connecting to a Cisco NexusVerifying Fibre Channel Communications on Family 5000 Series Switch Using SSHCisco MDS 9000 Series Multilayer Switches Reviewing the Cisco MDS Product Family Lab 1-3: Running CLI CommandsIdentifying Connectivity Options for FCoE on Monitoring the Cisco Nexus 7000 and Lab 1-4: Configuring vPCsthe Cisco Nexus 5000 5000 Series Switches Lab 1-5: Validating Cisco FabricPathDescribing Enhanced FCoE Scalability with Describing vPCs and Cisco FabricPath in ConfigurationCisco Nexus 2232 10GE Fabric Extenders the Data Center Lab 1-6: Validating OTV ConfigurationDescribing the Cisco UCS C-Series Product Using OTV on Cisco Nexus 7000 Series Lab 2-1: Verifying Current VDC SettingsFamily Switches Lab 2-2: Validating a Cisco Nexus 2000Connecting Cisco UCS B-Series Blade Virtualizing Storage Series Fabric Extender ConfigurationServers Virtualizing Server Solutions Lab 2-3: Validating a Cisco Nexus 1000VSetting up an Initial Cisco UCS B-Series Using the Cisco Nexus 1000V Series Series Switch ConfigurationCluster Switch Lab 3-1: Validating a Cisco MDS 9100Describing Cisco UCS Manager Operations Describing Fibre Channel Storage Series Multilayer Fabric Switch LicenseDescribing Cisco UCS Manager Pools, Networking Lab 3-2: Configuring VSANs and ZoningPolicies, Templates, and Chassis and Blade Verifying Fibre Channel Communications Lab 3-3: Validating FLOGI and FCNSPower Capping on Cisco MDS 9000 Series Multilayer Lab 3-3: Viewing the tech-supportLab 1-2: Observing the TCP Three-Way Switches Command OutputHandshake Identifying Connectivity Options for FCoE Lab 4-1: Validating the PhysicalLab 1-3: Observing Extended PC Network on the Cisco Nexus 5000 Connections for FCoEInformation Describing Enhanced FCoE Scalability Lab 5-1: Exploring the Cisco UCSLab 2-1: Connecting to Cisco Nexus with Cisco Nexus 2232 10GE Fabric Manager GUISwitches Extenders Lab 5-2: Creating a Service Profile from aLab 2-2: Configuring Cisco Nexus Switches Describing the Cisco UCS C-Series Template and Performing VMware ESXiLab 2-3: Configuring VLANs and Trunks Product Family 5.0 SAN BootLab 2-4: Verifying and Configuring Spanning Connecting Cisco UCS B-Series BladeTree ServersLab 2-5: Configuring EtherChannel Setting up an Initial Cisco UCS B-Series lineLab 3-1: Converting Decimal to Binary and Cluster Understanding the Host-to-HostBinary to Decimal Describing Cisco UCS Manager Communications ModelLab 3-2: Classifying Network Addressing Operations Describing Ethernet ConnectionsLab 3-3: Computing Usable Subnetworks Describing Cisco UCS Manager Pools, Describing Ethernet Communicationsand Hosts Policies, Templates, and Chassis and StandardsLab 3-4: Calculating Subnet Masks Blade Power Capping Describing OSI Network Layer AddressingLab 4-1: Configuring Multilayer Switching Lab 1-2: Observing the TCP Three-Way Describing the TCP/IP Transport LayerLab 1-2: Connecting to a Cisco Nexus 5000 Handshake Describing the Packet Delivery ProcessSeries Switch Using SSH Lab 1-3: Observing Extended PC Describing the Packet Delivery ProcessLab 1-3: Running CLI Commands Network Information Describing Cisco NX-OS SoftwareLab 1-4: Configuring vPCs Lab 2-1: Connecting to Cisco Nexus Operating Cisco NX-OS SoftwareLab 1-5: Validating Cisco FabricPath Switches Implementing VLANs and TrunksConfiguration Lab 2-2: Configuring Cisco Nexus Building a Redundant Switched Topology Lab 1-6: Validating OTV Configuration Switches Transitioning to IPv6 Lab 2-1: Verifying Current VDC Settings Lab 2-3: Configuring VLANs and Trunks Exploring the Routing Process on CiscoLab 2-2: Validating a Cisco Nexus 2000 Lab 2-4: Verifying and Configuring Nexus SwitchesSeries Fabric Extender Configuration Spanning Tree Exploring Routing Protocols on CiscoLab 2-3: Validating a Cisco Nexus 1000V Lab 2-5: Configuring EtherChannel Nexus SwitchesSeries Switch Configuration Lab 3-1: Converting Decimal to Binary Exploring ACLs on Cisco Nexus Switches Lab 3-1: Validating a Cisco MDS 9100 and Binary to Decimal Reviewing the Cisco Nexus Product FamilySeries Multilayer Fabric Switch License Lab 3-2: Classifying Network Addressing Reviewing the Cisco MDS Product FamilyLab 3-2: Configuring VSANs and Zoning Lab 3-3: Computing Usable Subnetworks Monitoring the Cisco Nexus 7000 andLab 3-3: Validating FLOGI and FCNS and Hosts 5000 Series SwitchesLab 3-3: Viewing the tech-support Command Lab 3-4: Calculating Subnet Masks Describing vPCs and Cisco FabricPath inOutput Lab 4-1: Configuring Multilayer Switching the Data CenterLab 4-1: Validating the Physical Lab 1-2: Connecting to a Cisco Nexus Using OTV on Cisco Nexus 7000 SeriesConnections for FCoE 5000 Series Switch Using SSH Switches Lab 5-1: Exploring the Cisco UCS Manager Lab 1-3: Running CLI Commands Virtualizing StorageGUI Lab 1-4: Configuring vPCs Virtualizing Server SolutionsLab 5-2: Creating a Service Profile from a Lab 1-5: Validating Cisco FabricPath Using the Cisco Nexus 1000V SeriesTemplate and Performing VMware ESXi 5.0 Configuration SwitchSAN Boot Lab 1-6: Validating OTV Configuration Describing Fibre Channel Storage

Lab 2-1: Verifying Current VDC Settings Networking5: Cisco Data Center Network Services Lab 2-2: Validating a Cisco Nexus 2000 Verifying Fibre Channel Communicationsline Series Fabric Extender Configuration on Cisco MDS 9000 Series Multilayer


Examining Functional Layers of the Data Lab 2-3: Validating a Cisco Nexus 1000V Switches Center Series Switch Configuration Identifying Connectivity Options for FCoE

Lab 3-1: Validating a Cisco MDS 9100 on the Cisco Nexus 5000Series Multilayer Fabric Switch License Describing Enhanced FCoE Scalability

line Lab 3-2: Configuring VSANs and Zoning with Cisco Nexus 2232 10GE FabricUnderstanding the Host-to-Host Lab 3-3: Validating FLOGI and FCNS Extenders Communications Model Lab 3-3: Viewing the tech-support Describing the Cisco UCS C-SeriesDescribing Ethernet Connections Command Output Product FamilyDescribing Ethernet Communications Lab 4-1: Validating the Physical Connecting Cisco UCS B-Series BladeStandards Connections for FCoE ServersDescribing OSI Network Layer Addressing Lab 5-1: Exploring the Cisco UCS Setting up an Initial Cisco UCS B-SeriesDescribing the TCP/IP Transport Layer Manager GUI ClusterDescribing the Packet Delivery Process Lab 5-2: Creating a Service Profile from a Describing Cisco UCS ManagerDescribing the Packet Delivery Process Template and Performing VMware ESXi OperationsDescribing Cisco NX-OS Software 5.0 SAN Boot Describing Cisco UCS Manager Pools,Operating Cisco NX-OS Software Policies, Templates, and Chassis andImplementing VLANs and Trunks Blade Power Capping Building a Redundant Switched Topology line Lab 1-2: Observing the TCP Three-WayTransitioning to IPv6 Understanding the Host-to-Host HandshakeExploring the Routing Process on Cisco Communications Model Lab 1-3: Observing Extended PC NetworkNexus Switches Describing Ethernet Connections InformationExploring Routing Protocols on Cisco Nexus Describing Ethernet Communications Lab 2-1: Connecting to Cisco NexusSwitches Standards SwitchesExploring ACLs on Cisco Nexus Switches Describing OSI Network Layer Lab 2-2: Configuring Cisco NexusReviewing the Cisco Nexus Product Family Addressing SwitchesReviewing the Cisco MDS Product Family Describing the TCP/IP Transport Layer Lab 2-3: Configuring VLANs and TrunksMonitoring the Cisco Nexus 7000 and 5000 Describing the Packet Delivery Process Lab 2-4: Verifying and ConfiguringSeries Switches Describing the Packet Delivery Process Spanning TreeDescribing vPCs and Cisco FabricPath in Describing Cisco NX-OS Software Lab 2-5: Configuring EtherChannelthe Data Center Operating Cisco NX-OS Software Lab 3-1: Converting Decimal to Binary andUsing OTV on Cisco Nexus 7000 Series Implementing VLANs and Trunks Binary to DecimalSwitches Building a Redundant Switched Topology Lab 3-2: Classifying Network AddressingVirtualizing Storage Transitioning to IPv6 Lab 3-3: Computing Usable SubnetworksVirtualizing Server Solutions Exploring the Routing Process on Cisco and HostsUsing the Cisco Nexus 1000V Series Switch Nexus Switches Lab 3-4: Calculating Subnet MasksDescribing Fibre Channel Storage Exploring Routing Protocols on Cisco Lab 4-1: Configuring Multilayer Switching Networking Nexus Switches Lab 1-2: Connecting to a Cisco NexusVerifying Fibre Channel Communications on Exploring ACLs on Cisco Nexus Switches 5000 Series Switch Using SSHCisco MDS 9000 Series Multilayer Switches Reviewing the Cisco Nexus Product Lab 1-3: Running CLI CommandsIdentifying Connectivity Options for FCoE on Family Lab 1-4: Configuring vPCsthe Cisco Nexus 5000 Reviewing the Cisco MDS Product Family Lab 1-5: Validating Cisco FabricPathDescribing Enhanced FCoE Scalability with Monitoring the Cisco Nexus 7000 and ConfigurationCisco Nexus 2232 10GE Fabric Extenders 5000 Series Switches Lab 1-6: Validating OTV ConfigurationDescribing the Cisco UCS C-Series Product Describing vPCs and Cisco FabricPath in Lab 2-1: Verifying Current VDC SettingsFamily the Data Center Lab 2-2: Validating a Cisco Nexus 2000Connecting Cisco UCS B-Series Blade Using OTV on Cisco Nexus 7000 Series Series Fabric Extender ConfigurationServers Switches Lab 2-3: Validating a Cisco Nexus 1000VSetting up an Initial Cisco UCS B-Series Virtualizing Storage Series Switch ConfigurationCluster Virtualizing Server Solutions Lab 3-1: Validating a Cisco MDS 9100Describing Cisco UCS Manager Operations Using the Cisco Nexus 1000V Series Series Multilayer Fabric Switch LicenseDescribing Cisco UCS Manager Pools, Switch Lab 3-2: Configuring VSANs and ZoningPolicies, Templates, and Chassis and Blade Describing Fibre Channel Storage Lab 3-3: Validating FLOGI and FCNSPower Capping Networking Lab 3-3: Viewing the tech-supportLab 1-2: Observing the TCP Three-Way Verifying Fibre Channel Communications Command OutputHandshake on Cisco MDS 9000 Series Multilayer Lab 4-1: Validating the PhysicalLab 1-3: Observing Extended PC Network Switches Connections for FCoEInformation Identifying Connectivity Options for FCoE Lab 5-1: Exploring the Cisco UCSLab 2-1: Connecting to Cisco Nexus on the Cisco Nexus 5000 Manager GUISwitches Describing Enhanced FCoE Scalability Lab 5-2: Creating a Service Profile from aLab 2-2: Configuring Cisco Nexus Switches with Cisco Nexus 2232 10GE Fabric Template and Performing VMware ESXiLab 2-3: Configuring VLANs and Trunks Extenders 5.0 SAN BootLab 2-4: Verifying and Configuring Spanning Describing the Cisco UCS C-SeriesTree Product FamilyLab 2-5: Configuring EtherChannel Connecting Cisco UCS B-Series Blade lineLab 3-1: Converting Decimal to Binary and Servers Understanding the Host-to-Host


Binary to Decimal Setting up an Initial Cisco UCS B-Series Communications ModelLab 3-2: Classifying Network Addressing Cluster Describing Ethernet ConnectionsLab 3-3: Computing Usable Subnetworks Describing Cisco UCS Manager Describing Ethernet Communicationsand Hosts Operations StandardsLab 3-4: Calculating Subnet Masks Describing Cisco UCS Manager Pools, Describing OSI Network Layer AddressingLab 4-1: Configuring Multilayer Switching Policies, Templates, and Chassis and Describing the TCP/IP Transport LayerLab 1-2: Connecting to a Cisco Nexus 5000 Blade Power Capping Describing the Packet Delivery ProcessSeries Switch Using SSH Lab 1-2: Observing the TCP Three-Way Describing the Packet Delivery ProcessLab 1-3: Running CLI Commands Handshake Describing Cisco NX-OS SoftwareLab 1-4: Configuring vPCs Lab 1-3: Observing Extended PC Operating Cisco NX-OS SoftwareLab 1-5: Validating Cisco FabricPath Network Information Implementing VLANs and TrunksConfiguration Lab 2-1: Connecting to Cisco Nexus Building a Redundant Switched Topology Lab 1-6: Validating OTV Configuration Switches Transitioning to IPv6 Lab 2-1: Verifying Current VDC Settings Lab 2-2: Configuring Cisco Nexus Exploring the Routing Process on CiscoLab 2-2: Validating a Cisco Nexus 2000 Switches Nexus SwitchesSeries Fabric Extender Configuration Lab 2-3: Configuring VLANs and Trunks Exploring Routing Protocols on CiscoLab 2-3: Validating a Cisco Nexus 1000V Lab 2-4: Verifying and Configuring Nexus SwitchesSeries Switch Configuration Spanning Tree Exploring ACLs on Cisco Nexus Switches Lab 3-1: Validating a Cisco MDS 9100 Lab 2-5: Configuring EtherChannel Reviewing the Cisco Nexus Product FamilySeries Multilayer Fabric Switch License Lab 3-1: Converting Decimal to Binary Reviewing the Cisco MDS Product FamilyLab 3-2: Configuring VSANs and Zoning and Binary to Decimal Monitoring the Cisco Nexus 7000 andLab 3-3: Validating FLOGI and FCNS Lab 3-2: Classifying Network Addressing 5000 Series SwitchesLab 3-3: Viewing the tech-support Command Lab 3-3: Computing Usable Subnetworks Describing vPCs and Cisco FabricPath inOutput and Hosts the Data CenterLab 4-1: Validating the Physical Lab 3-4: Calculating Subnet Masks Using OTV on Cisco Nexus 7000 SeriesConnections for FCoE Lab 4-1: Configuring Multilayer Switching Switches Lab 5-1: Exploring the Cisco UCS Manager Lab 1-2: Connecting to a Cisco Nexus Virtualizing StorageGUI 5000 Series Switch Using SSH Virtualizing Server SolutionsLab 5-2: Creating a Service Profile from a Lab 1-3: Running CLI Commands Using the Cisco Nexus 1000V SeriesTemplate and Performing VMware ESXi 5.0 Lab 1-4: Configuring vPCs SwitchSAN Boot Lab 1-5: Validating Cisco FabricPath Describing Fibre Channel Storage

Configuration NetworkingLab 1-6: Validating OTV Configuration Verifying Fibre Channel Communications

line Lab 2-1: Verifying Current VDC Settings on Cisco MDS 9000 Series MultilayerUnderstanding the Host-to-Host Lab 2-2: Validating a Cisco Nexus 2000 Switches Communications Model Series Fabric Extender Configuration Identifying Connectivity Options for FCoEDescribing Ethernet Connections Lab 2-3: Validating a Cisco Nexus 1000V on the Cisco Nexus 5000Describing Ethernet Communications Series Switch Configuration Describing Enhanced FCoE ScalabilityStandards Lab 3-1: Validating a Cisco MDS 9100 with Cisco Nexus 2232 10GE FabricDescribing OSI Network Layer Addressing Series Multilayer Fabric Switch License Extenders Describing the TCP/IP Transport Layer Lab 3-2: Configuring VSANs and Zoning Describing the Cisco UCS C-SeriesDescribing the Packet Delivery Process Lab 3-3: Validating FLOGI and FCNS Product FamilyDescribing the Packet Delivery Process Lab 3-3: Viewing the tech-support Connecting Cisco UCS B-Series BladeDescribing Cisco NX-OS Software Command Output ServersOperating Cisco NX-OS Software Lab 4-1: Validating the Physical Setting up an Initial Cisco UCS B-SeriesImplementing VLANs and Trunks Connections for FCoE ClusterBuilding a Redundant Switched Topology Lab 5-1: Exploring the Cisco UCS Describing Cisco UCS ManagerTransitioning to IPv6 Manager GUI OperationsExploring the Routing Process on Cisco Lab 5-2: Creating a Service Profile from a Describing Cisco UCS Manager Pools,Nexus Switches Template and Performing VMware ESXi Policies, Templates, and Chassis andExploring Routing Protocols on Cisco Nexus 5.0 SAN Boot Blade Power Capping Switches Lab 1-2: Observing the TCP Three-WayExploring ACLs on Cisco Nexus Switches HandshakeReviewing the Cisco Nexus Product Family line Lab 1-3: Observing Extended PC NetworkReviewing the Cisco MDS Product Family Understanding the Host-to-Host InformationMonitoring the Cisco Nexus 7000 and 5000 Communications Model Lab 2-1: Connecting to Cisco NexusSeries Switches Describing Ethernet Connections SwitchesDescribing vPCs and Cisco FabricPath in Describing Ethernet Communications Lab 2-2: Configuring Cisco Nexusthe Data Center Standards SwitchesUsing OTV on Cisco Nexus 7000 Series Describing OSI Network Layer Lab 2-3: Configuring VLANs and TrunksSwitches Addressing Lab 2-4: Verifying and ConfiguringVirtualizing Storage Describing the TCP/IP Transport Layer Spanning TreeVirtualizing Server Solutions Describing the Packet Delivery Process Lab 2-5: Configuring EtherChannelUsing the Cisco Nexus 1000V Series Switch Describing the Packet Delivery Process Lab 3-1: Converting Decimal to Binary andDescribing Fibre Channel Storage Describing Cisco NX-OS Software Binary to Decimal


Networking Operating Cisco NX-OS Software Lab 3-2: Classifying Network AddressingVerifying Fibre Channel Communications on Implementing VLANs and Trunks Lab 3-3: Computing Usable SubnetworksCisco MDS 9000 Series Multilayer Switches Building a Redundant Switched Topology and HostsIdentifying Connectivity Options for FCoE on Transitioning to IPv6 Lab 3-4: Calculating Subnet Masksthe Cisco Nexus 5000 Exploring the Routing Process on Cisco Lab 4-1: Configuring Multilayer Switching Describing Enhanced FCoE Scalability with Nexus Switches Lab 1-2: Connecting to a Cisco NexusCisco Nexus 2232 10GE Fabric Extenders Exploring Routing Protocols on Cisco 5000 Series Switch Using SSHDescribing the Cisco UCS C-Series Product Nexus Switches Lab 1-3: Running CLI CommandsFamily Exploring ACLs on Cisco Nexus Switches Lab 1-4: Configuring vPCsConnecting Cisco UCS B-Series Blade Reviewing the Cisco Nexus Product Lab 1-5: Validating Cisco FabricPathServers Family ConfigurationSetting up an Initial Cisco UCS B-Series Reviewing the Cisco MDS Product Family Lab 1-6: Validating OTV ConfigurationCluster Monitoring the Cisco Nexus 7000 and Lab 2-1: Verifying Current VDC SettingsDescribing Cisco UCS Manager Operations 5000 Series Switches Lab 2-2: Validating a Cisco Nexus 2000Describing Cisco UCS Manager Pools, Describing vPCs and Cisco FabricPath in Series Fabric Extender ConfigurationPolicies, Templates, and Chassis and Blade the Data Center Lab 2-3: Validating a Cisco Nexus 1000VPower Capping Using OTV on Cisco Nexus 7000 Series Series Switch ConfigurationLab 1-2: Observing the TCP Three-Way Switches Lab 3-1: Validating a Cisco MDS 9100Handshake Virtualizing Storage Series Multilayer Fabric Switch LicenseLab 1-3: Observing Extended PC Network Virtualizing Server Solutions Lab 3-2: Configuring VSANs and ZoningInformation Using the Cisco Nexus 1000V Series Lab 3-3: Validating FLOGI and FCNSLab 2-1: Connecting to Cisco Nexus Switch Lab 3-3: Viewing the tech-supportSwitches Describing Fibre Channel Storage Command OutputLab 2-2: Configuring Cisco Nexus Switches Networking Lab 4-1: Validating the PhysicalLab 2-3: Configuring VLANs and Trunks Verifying Fibre Channel Communications Connections for FCoELab 2-4: Verifying and Configuring Spanning on Cisco MDS 9000 Series Multilayer Lab 5-1: Exploring the Cisco UCSTree Switches Manager GUILab 2-5: Configuring EtherChannel Identifying Connectivity Options for FCoE Lab 5-2: Creating a Service Profile from aLab 3-1: Converting Decimal to Binary and on the Cisco Nexus 5000 Template and Performing VMware ESXiBinary to Decimal Describing Enhanced FCoE Scalability 5.0 SAN BootLab 3-2: Classifying Network Addressing with Cisco Nexus 2232 10GE FabricLab 3-3: Computing Usable Subnetworks Extenders and Hosts Describing the Cisco UCS C-Series lineLab 3-4: Calculating Subnet Masks Product Family Understanding the Host-to-HostLab 4-1: Configuring Multilayer Switching Connecting Cisco UCS B-Series Blade Communications ModelLab 1-2: Connecting to a Cisco Nexus 5000 Servers Describing Ethernet ConnectionsSeries Switch Using SSH Setting up an Initial Cisco UCS B-Series Describing Ethernet CommunicationsLab 1-3: Running CLI Commands Cluster StandardsLab 1-4: Configuring vPCs Describing Cisco UCS Manager Describing OSI Network Layer AddressingLab 1-5: Validating Cisco FabricPath Operations Describing the TCP/IP Transport LayerConfiguration Describing Cisco UCS Manager Pools, Describing the Packet Delivery ProcessLab 1-6: Validating OTV Configuration Policies, Templates, and Chassis and Describing the Packet Delivery ProcessLab 2-1: Verifying Current VDC Settings Blade Power Capping Describing Cisco NX-OS SoftwareLab 2-2: Validating a Cisco Nexus 2000 Lab 1-2: Observing the TCP Three-Way Operating Cisco NX-OS SoftwareSeries Fabric Extender Configuration Handshake Implementing VLANs and TrunksLab 2-3: Validating a Cisco Nexus 1000V Lab 1-3: Observing Extended PC Building a Redundant Switched Topology Series Switch Configuration Network Information Transitioning to IPv6 Lab 3-1: Validating a Cisco MDS 9100 Lab 2-1: Connecting to Cisco Nexus Exploring the Routing Process on CiscoSeries Multilayer Fabric Switch License Switches Nexus SwitchesLab 3-2: Configuring VSANs and Zoning Lab 2-2: Configuring Cisco Nexus Exploring Routing Protocols on CiscoLab 3-3: Validating FLOGI and FCNS Switches Nexus SwitchesLab 3-3: Viewing the tech-support Command Lab 2-3: Configuring VLANs and Trunks Exploring ACLs on Cisco Nexus Switches Output Lab 2-4: Verifying and Configuring Reviewing the Cisco Nexus Product FamilyLab 4-1: Validating the Physical Spanning Tree Reviewing the Cisco MDS Product FamilyConnections for FCoE Lab 2-5: Configuring EtherChannel Monitoring the Cisco Nexus 7000 andLab 5-1: Exploring the Cisco UCS Manager Lab 3-1: Converting Decimal to Binary 5000 Series SwitchesGUI and Binary to Decimal Describing vPCs and Cisco FabricPath inLab 5-2: Creating a Service Profile from a Lab 3-2: Classifying Network Addressing the Data CenterTemplate and Performing VMware ESXi 5.0 Lab 3-3: Computing Usable Subnetworks Using OTV on Cisco Nexus 7000 SeriesSAN Boot and Hosts Switches

Lab 3-4: Calculating Subnet Masks Virtualizing StorageLab 4-1: Configuring Multilayer Switching Virtualizing Server Solutions

line Lab 1-2: Connecting to a Cisco Nexus Using the Cisco Nexus 1000V SeriesUnderstanding the Host-to-Host 5000 Series Switch Using SSH SwitchCommunications Model Lab 1-3: Running CLI Commands Describing Fibre Channel Storage


Describing Ethernet Connections Lab 1-4: Configuring vPCs NetworkingDescribing Ethernet Communications Lab 1-5: Validating Cisco FabricPath Verifying Fibre Channel CommunicationsStandards Configuration on Cisco MDS 9000 Series MultilayerDescribing OSI Network Layer Addressing Lab 1-6: Validating OTV Configuration Switches Describing the TCP/IP Transport Layer Lab 2-1: Verifying Current VDC Settings Identifying Connectivity Options for FCoEDescribing the Packet Delivery Process Lab 2-2: Validating a Cisco Nexus 2000 on the Cisco Nexus 5000Describing the Packet Delivery Process Series Fabric Extender Configuration Describing Enhanced FCoE ScalabilityDescribing Cisco NX-OS Software Lab 2-3: Validating a Cisco Nexus 1000V with Cisco Nexus 2232 10GE FabricOperating Cisco NX-OS Software Series Switch Configuration Extenders Implementing VLANs and Trunks Lab 3-1: Validating a Cisco MDS 9100 Describing the Cisco UCS C-SeriesBuilding a Redundant Switched Topology Series Multilayer Fabric Switch License Product FamilyTransitioning to IPv6 Lab 3-2: Configuring VSANs and Zoning Connecting Cisco UCS B-Series BladeExploring the Routing Process on Cisco Lab 3-3: Validating FLOGI and FCNS ServersNexus Switches Lab 3-3: Viewing the tech-support Setting up an Initial Cisco UCS B-SeriesExploring Routing Protocols on Cisco Nexus Command Output ClusterSwitches Lab 4-1: Validating the Physical Describing Cisco UCS ManagerExploring ACLs on Cisco Nexus Switches Connections for FCoE OperationsReviewing the Cisco Nexus Product Family Lab 5-1: Exploring the Cisco UCS Describing Cisco UCS Manager Pools,Reviewing the Cisco MDS Product Family Manager GUI Policies, Templates, and Chassis andMonitoring the Cisco Nexus 7000 and 5000 Lab 5-2: Creating a Service Profile from a Blade Power Capping Series Switches Template and Performing VMware ESXi Lab 1-2: Observing the TCP Three-WayDescribing vPCs and Cisco FabricPath in 5.0 SAN Boot Handshakethe Data Center Lab 1-3: Observing Extended PC NetworkUsing OTV on Cisco Nexus 7000 Series InformationSwitches line Lab 2-1: Connecting to Cisco NexusVirtualizing Storage Understanding the Host-to-Host SwitchesVirtualizing Server Solutions Communications Model Lab 2-2: Configuring Cisco NexusUsing the Cisco Nexus 1000V Series Switch Describing Ethernet Connections SwitchesDescribing Fibre Channel Storage Describing Ethernet Communications Lab 2-3: Configuring VLANs and TrunksNetworking Standards Lab 2-4: Verifying and ConfiguringVerifying Fibre Channel Communications on Describing OSI Network Layer Spanning TreeCisco MDS 9000 Series Multilayer Switches Addressing Lab 2-5: Configuring EtherChannelIdentifying Connectivity Options for FCoE on Describing the TCP/IP Transport Layer Lab 3-1: Converting Decimal to Binary andthe Cisco Nexus 5000 Describing the Packet Delivery Process Binary to DecimalDescribing Enhanced FCoE Scalability with Describing the Packet Delivery Process Lab 3-2: Classifying Network AddressingCisco Nexus 2232 10GE Fabric Extenders Describing Cisco NX-OS Software Lab 3-3: Computing Usable SubnetworksDescribing the Cisco UCS C-Series Product Operating Cisco NX-OS Software and HostsFamily Implementing VLANs and Trunks Lab 3-4: Calculating Subnet MasksConnecting Cisco UCS B-Series Blade Building a Redundant Switched Topology Lab 4-1: Configuring Multilayer Switching Servers Transitioning to IPv6 Lab 1-2: Connecting to a Cisco NexusSetting up an Initial Cisco UCS B-Series Exploring the Routing Process on Cisco 5000 Series Switch Using SSHCluster Nexus Switches Lab 1-3: Running CLI CommandsDescribing Cisco UCS Manager Operations Exploring Routing Protocols on Cisco Lab 1-4: Configuring vPCsDescribing Cisco UCS Manager Pools, Nexus Switches Lab 1-5: Validating Cisco FabricPathPolicies, Templates, and Chassis and Blade Exploring ACLs on Cisco Nexus Switches ConfigurationPower Capping Reviewing the Cisco Nexus Product Lab 1-6: Validating OTV ConfigurationLab 1-2: Observing the TCP Three-Way Family Lab 2-1: Verifying Current VDC SettingsHandshake Reviewing the Cisco MDS Product Family Lab 2-2: Validating a Cisco Nexus 2000Lab 1-3: Observing Extended PC Network Monitoring the Cisco Nexus 7000 and Series Fabric Extender ConfigurationInformation 5000 Series Switches Lab 2-3: Validating a Cisco Nexus 1000VLab 2-1: Connecting to Cisco Nexus Describing vPCs and Cisco FabricPath in Series Switch ConfigurationSwitches the Data Center Lab 3-1: Validating a Cisco MDS 9100Lab 2-2: Configuring Cisco Nexus Switches Using OTV on Cisco Nexus 7000 Series Series Multilayer Fabric Switch LicenseLab 2-3: Configuring VLANs and Trunks Switches Lab 3-2: Configuring VSANs and ZoningLab 2-4: Verifying and Configuring Spanning Virtualizing Storage Lab 3-3: Validating FLOGI and FCNSTree Virtualizing Server Solutions Lab 3-3: Viewing the tech-supportLab 2-5: Configuring EtherChannel Using the Cisco Nexus 1000V Series Command OutputLab 3-1: Converting Decimal to Binary and Switch Lab 4-1: Validating the PhysicalBinary to Decimal Describing Fibre Channel Storage Connections for FCoELab 3-2: Classifying Network Addressing Networking Lab 5-1: Exploring the Cisco UCSLab 3-3: Computing Usable Subnetworks Verifying Fibre Channel Communications Manager GUIand Hosts on Cisco MDS 9000 Series Multilayer Lab 5-2: Creating a Service Profile from aLab 3-4: Calculating Subnet Masks Switches Template and Performing VMware ESXiLab 4-1: Configuring Multilayer Switching Identifying Connectivity Options for FCoE 5.0 SAN BootLab 1-2: Connecting to a Cisco Nexus 5000 on the Cisco Nexus 5000


Series Switch Using SSH Describing Enhanced FCoE ScalabilityLab 1-3: Running CLI Commands with Cisco Nexus 2232 10GE Fabric lineLab 1-4: Configuring vPCs Extenders Understanding the Host-to-HostLab 1-5: Validating Cisco FabricPath Describing the Cisco UCS C-Series Communications ModelConfiguration Product Family Describing Ethernet ConnectionsLab 1-6: Validating OTV Configuration Connecting Cisco UCS B-Series Blade Describing Ethernet CommunicationsLab 2-1: Verifying Current VDC Settings Servers StandardsLab 2-2: Validating a Cisco Nexus 2000 Setting up an Initial Cisco UCS B-Series Describing OSI Network Layer AddressingSeries Fabric Extender Configuration Cluster Describing the TCP/IP Transport LayerLab 2-3: Validating a Cisco Nexus 1000V Describing Cisco UCS Manager Describing the Packet Delivery ProcessSeries Switch Configuration Operations Describing the Packet Delivery ProcessLab 3-1: Validating a Cisco MDS 9100 Describing Cisco UCS Manager Pools, Describing Cisco NX-OS SoftwareSeries Multilayer Fabric Switch License Policies, Templates, and Chassis and Operating Cisco NX-OS SoftwareLab 3-2: Configuring VSANs and Zoning Blade Power Capping Implementing VLANs and TrunksLab 3-3: Validating FLOGI and FCNS Lab 1-2: Observing the TCP Three-Way Building a Redundant Switched Topology Lab 3-3: Viewing the tech-support Command Handshake Transitioning to IPv6 Output Lab 1-3: Observing Extended PC Exploring the Routing Process on CiscoLab 4-1: Validating the Physical Network Information Nexus SwitchesConnections for FCoE Lab 2-1: Connecting to Cisco Nexus Exploring Routing Protocols on CiscoLab 5-1: Exploring the Cisco UCS Manager Switches Nexus SwitchesGUI Lab 2-2: Configuring Cisco Nexus Exploring ACLs on Cisco Nexus Switches Lab 5-2: Creating a Service Profile from a Switches Reviewing the Cisco Nexus Product FamilyTemplate and Performing VMware ESXi 5.0 Lab 2-3: Configuring VLANs and Trunks Reviewing the Cisco MDS Product FamilySAN Boot Lab 2-4: Verifying and Configuring Monitoring the Cisco Nexus 7000 and

Spanning Tree 5000 Series SwitchesLab 2-5: Configuring EtherChannel Describing vPCs and Cisco FabricPath in

line Lab 3-1: Converting Decimal to Binary the Data CenterUnderstanding the Host-to-Host and Binary to Decimal Using OTV on Cisco Nexus 7000 SeriesCommunications Model Lab 3-2: Classifying Network Addressing Switches Describing Ethernet Connections Lab 3-3: Computing Usable Subnetworks Virtualizing StorageDescribing Ethernet Communications and Hosts Virtualizing Server SolutionsStandards Lab 3-4: Calculating Subnet Masks Using the Cisco Nexus 1000V SeriesDescribing OSI Network Layer Addressing Lab 4-1: Configuring Multilayer Switching SwitchDescribing the TCP/IP Transport Layer Lab 1-2: Connecting to a Cisco Nexus Describing Fibre Channel StorageDescribing the Packet Delivery Process 5000 Series Switch Using SSH NetworkingDescribing the Packet Delivery Process Lab 1-3: Running CLI Commands Verifying Fibre Channel CommunicationsDescribing Cisco NX-OS Software Lab 1-4: Configuring vPCs on Cisco MDS 9000 Series MultilayerOperating Cisco NX-OS Software Lab 1-5: Validating Cisco FabricPath Switches Implementing VLANs and Trunks Configuration Identifying Connectivity Options for FCoEBuilding a Redundant Switched Topology Lab 1-6: Validating OTV Configuration on the Cisco Nexus 5000Transitioning to IPv6 Lab 2-1: Verifying Current VDC Settings Describing Enhanced FCoE ScalabilityExploring the Routing Process on Cisco Lab 2-2: Validating a Cisco Nexus 2000 with Cisco Nexus 2232 10GE FabricNexus Switches Series Fabric Extender Configuration Extenders Exploring Routing Protocols on Cisco Nexus Lab 2-3: Validating a Cisco Nexus 1000V Describing the Cisco UCS C-SeriesSwitches Series Switch Configuration Product FamilyExploring ACLs on Cisco Nexus Switches Lab 3-1: Validating a Cisco MDS 9100 Connecting Cisco UCS B-Series BladeReviewing the Cisco Nexus Product Family Series Multilayer Fabric Switch License ServersReviewing the Cisco MDS Product Family Lab 3-2: Configuring VSANs and Zoning Setting up an Initial Cisco UCS B-SeriesMonitoring the Cisco Nexus 7000 and 5000 Lab 3-3: Validating FLOGI and FCNS ClusterSeries Switches Lab 3-3: Viewing the tech-support Describing Cisco UCS ManagerDescribing vPCs and Cisco FabricPath in Command Output Operationsthe Data Center Lab 4-1: Validating the Physical Describing Cisco UCS Manager Pools,Using OTV on Cisco Nexus 7000 Series Connections for FCoE Policies, Templates, and Chassis andSwitches Lab 5-1: Exploring the Cisco UCS Blade Power Capping Virtualizing Storage Manager GUI Lab 1-2: Observing the TCP Three-WayVirtualizing Server Solutions Lab 5-2: Creating a Service Profile from a HandshakeUsing the Cisco Nexus 1000V Series Switch Template and Performing VMware ESXi Lab 1-3: Observing Extended PC NetworkDescribing Fibre Channel Storage 5.0 SAN Boot InformationNetworking Lab 2-1: Connecting to Cisco NexusVerifying Fibre Channel Communications on SwitchesCisco MDS 9000 Series Multilayer Switches Lab 2-2: Configuring Cisco NexusIdentifying Connectivity Options for FCoE on Switchesthe Cisco Nexus 5000 Lab 2-3: Configuring VLANs and TrunksDescribing Enhanced FCoE Scalability with Lab 2-4: Verifying and ConfiguringCisco Nexus 2232 10GE Fabric Extenders Spanning Tree


Describing the Cisco UCS C-Series Product Lab 2-5: Configuring EtherChannelFamily Lab 3-1: Converting Decimal to Binary andConnecting Cisco UCS B-Series Blade Binary to DecimalServers Lab 3-2: Classifying Network AddressingSetting up an Initial Cisco UCS B-Series Lab 3-3: Computing Usable SubnetworksCluster and HostsDescribing Cisco UCS Manager Operations Lab 3-4: Calculating Subnet MasksDescribing Cisco UCS Manager Pools, Lab 4-1: Configuring Multilayer Switching Policies, Templates, and Chassis and Blade Lab 1-2: Connecting to a Cisco NexusPower Capping 5000 Series Switch Using SSHLab 1-2: Observing the TCP Three-Way Lab 1-3: Running CLI CommandsHandshake Lab 1-4: Configuring vPCsLab 1-3: Observing Extended PC Network Lab 1-5: Validating Cisco FabricPathInformation ConfigurationLab 2-1: Connecting to Cisco Nexus Lab 1-6: Validating OTV ConfigurationSwitches Lab 2-1: Verifying Current VDC SettingsLab 2-2: Configuring Cisco Nexus Switches Lab 2-2: Validating a Cisco Nexus 2000Lab 2-3: Configuring VLANs and Trunks Series Fabric Extender ConfigurationLab 2-4: Verifying and Configuring Spanning Lab 2-3: Validating a Cisco Nexus 1000VTree Series Switch ConfigurationLab 2-5: Configuring EtherChannel Lab 3-1: Validating a Cisco MDS 9100Lab 3-1: Converting Decimal to Binary and Series Multilayer Fabric Switch LicenseBinary to Decimal Lab 3-2: Configuring VSANs and ZoningLab 3-2: Classifying Network Addressing Lab 3-3: Validating FLOGI and FCNSLab 3-3: Computing Usable Subnetworks Lab 3-3: Viewing the tech-supportand Hosts Command OutputLab 3-4: Calculating Subnet Masks Lab 4-1: Validating the PhysicalLab 4-1: Configuring Multilayer Switching Connections for FCoELab 1-2: Connecting to a Cisco Nexus 5000 Lab 5-1: Exploring the Cisco UCSSeries Switch Using SSH Manager GUILab 1-3: Running CLI Commands Lab 5-2: Creating a Service Profile from aLab 1-4: Configuring vPCs Template and Performing VMware ESXiLab 1-5: Validating Cisco FabricPath 5.0 SAN BootConfigurationLab 1-6: Validating OTV ConfigurationLab 2-1: Verifying Current VDC Settings lineLab 2-2: Validating a Cisco Nexus 2000 Understanding the Host-to-HostSeries Fabric Extender Configuration Communications ModelLab 2-3: Validating a Cisco Nexus 1000V Describing Ethernet ConnectionsSeries Switch Configuration Describing Ethernet CommunicationsLab 3-1: Validating a Cisco MDS 9100 StandardsSeries Multilayer Fabric Switch License Describing OSI Network Layer AddressingLab 3-2: Configuring VSANs and Zoning Describing the TCP/IP Transport LayerLab 3-3: Validating FLOGI and FCNS Describing the Packet Delivery ProcessLab 3-3: Viewing the tech-support Command Describing the Packet Delivery ProcessOutput Describing Cisco NX-OS SoftwareLab 4-1: Validating the Physical Operating Cisco NX-OS SoftwareConnections for FCoE Implementing VLANs and TrunksLab 5-1: Exploring the Cisco UCS Manager Building a Redundant Switched Topology GUI Transitioning to IPv6 Lab 5-2: Creating a Service Profile from a Exploring the Routing Process on CiscoTemplate and Performing VMware ESXi 5.0 Nexus SwitchesSAN Boot Exploring Routing Protocols on Cisco

Nexus SwitchesExploring ACLs on Cisco Nexus Switches Reviewing the Cisco Nexus Product FamilyReviewing the Cisco MDS Product FamilyMonitoring the Cisco Nexus 7000 and5000 Series SwitchesDescribing vPCs and Cisco FabricPath inthe Data CenterUsing OTV on Cisco Nexus 7000 SeriesSwitches Virtualizing StorageVirtualizing Server Solutions


Using the Cisco Nexus 1000V SeriesSwitchDescribing Fibre Channel StorageNetworkingVerifying Fibre Channel Communicationson Cisco MDS 9000 Series MultilayerSwitches Identifying Connectivity Options for FCoEon the Cisco Nexus 5000Describing Enhanced FCoE Scalabilitywith Cisco Nexus 2232 10GE FabricExtenders Describing the Cisco UCS C-SeriesProduct FamilyConnecting Cisco UCS B-Series BladeServersSetting up an Initial Cisco UCS B-SeriesClusterDescribing Cisco UCS ManagerOperationsDescribing Cisco UCS Manager Pools,Policies, Templates, and Chassis andBlade Power Capping Lab 1-2: Observing the TCP Three-WayHandshakeLab 1-3: Observing Extended PC NetworkInformationLab 2-1: Connecting to Cisco NexusSwitchesLab 2-2: Configuring Cisco NexusSwitchesLab 2-3: Configuring VLANs and TrunksLab 2-4: Verifying and ConfiguringSpanning TreeLab 2-5: Configuring EtherChannelLab 3-1: Converting Decimal to Binary andBinary to DecimalLab 3-2: Classifying Network AddressingLab 3-3: Computing Usable Subnetworksand HostsLab 3-4: Calculating Subnet MasksLab 4-1: Configuring Multilayer Switching Lab 1-2: Connecting to a Cisco Nexus5000 Series Switch Using SSHLab 1-3: Running CLI CommandsLab 1-4: Configuring vPCsLab 1-5: Validating Cisco FabricPathConfigurationLab 1-6: Validating OTV ConfigurationLab 2-1: Verifying Current VDC SettingsLab 2-2: Validating a Cisco Nexus 2000Series Fabric Extender ConfigurationLab 2-3: Validating a Cisco Nexus 1000VSeries Switch ConfigurationLab 3-1: Validating a Cisco MDS 9100Series Multilayer Fabric Switch LicenseLab 3-2: Configuring VSANs and ZoningLab 3-3: Validating FLOGI and FCNSLab 3-3: Viewing the tech-supportCommand OutputLab 4-1: Validating the PhysicalConnections for FCoELab 5-1: Exploring the Cisco UCSManager GUILab 5-2: Creating a Service Profile from a


Template and Performing VMware ESXi5.0 SAN Boot

lineUnderstanding the Host-to-HostCommunications ModelDescribing Ethernet ConnectionsDescribing Ethernet CommunicationsStandardsDescribing OSI Network Layer AddressingDescribing the TCP/IP Transport LayerDescribing the Packet Delivery ProcessDescribing the Packet Delivery ProcessDescribing Cisco NX-OS SoftwareOperating Cisco NX-OS SoftwareImplementing VLANs and TrunksBuilding a Redundant Switched Topology Transitioning to IPv6 Exploring the Routing Process on CiscoNexus SwitchesExploring Routing Protocols on CiscoNexus SwitchesExploring ACLs on Cisco Nexus Switches Reviewing the Cisco Nexus Product FamilyReviewing the Cisco MDS Product FamilyMonitoring the Cisco Nexus 7000 and5000 Series SwitchesDescribing vPCs and Cisco FabricPath inthe Data CenterUsing OTV on Cisco Nexus 7000 SeriesSwitches Virtualizing StorageVirtualizing Server SolutionsUsing the Cisco Nexus 1000V SeriesSwitchDescribing Fibre Channel StorageNetworkingVerifying Fibre Channel Communicationson Cisco MDS 9000 Series MultilayerSwitches Identifying Connectivity Options for FCoEon the Cisco Nexus 5000Describing Enhanced FCoE Scalabilitywith Cisco Nexus 2232 10GE FabricExtenders Describing the Cisco UCS C-SeriesProduct FamilyConnecting Cisco UCS B-Series BladeServersSetting up an Initial Cisco UCS B-SeriesClusterDescribing Cisco UCS ManagerOperationsDescribing Cisco UCS Manager Pools,Policies, Templates, and Chassis andBlade Power Capping Lab 1-2: Observing the TCP Three-WayHandshakeLab 1-3: Observing Extended PC NetworkInformationLab 2-1: Connecting to Cisco NexusSwitchesLab 2-2: Configuring Cisco NexusSwitches


Lab 2-3: Configuring VLANs and TrunksLab 2-4: Verifying and ConfiguringSpanning TreeLab 2-5: Configuring EtherChannelLab 3-1: Converting Decimal to Binary andBinary to DecimalLab 3-2: Classifying Network AddressingLab 3-3: Computing Usable Subnetworksand HostsLab 3-4: Calculating Subnet MasksLab 4-1: Configuring Multilayer Switching Lab 1-2: Connecting to a Cisco Nexus5000 Series Switch Using SSHLab 1-3: Running CLI CommandsLab 1-4: Configuring vPCsLab 1-5: Validating Cisco FabricPathConfigurationLab 1-6: Validating OTV ConfigurationLab 2-1: Verifying Current VDC SettingsLab 2-2: Validating a Cisco Nexus 2000Series Fabric Extender ConfigurationLab 2-3: Validating a Cisco Nexus 1000VSeries Switch ConfigurationLab 3-1: Validating a Cisco MDS 9100Series Multilayer Fabric Switch LicenseLab 3-2: Configuring VSANs and ZoningLab 3-3: Validating FLOGI and FCNSLab 3-3: Viewing the tech-supportCommand OutputLab 4-1: Validating the PhysicalConnections for FCoELab 5-1: Exploring the Cisco UCSManager GUILab 5-2: Creating a Service Profile from aTemplate and Performing VMware ESXi5.0 SAN Boot

lineUnderstanding the Host-to-HostCommunications ModelDescribing Ethernet ConnectionsDescribing Ethernet CommunicationsStandardsDescribing OSI Network Layer AddressingDescribing the TCP/IP Transport LayerDescribing the Packet Delivery ProcessDescribing the Packet Delivery ProcessDescribing Cisco NX-OS SoftwareOperating Cisco NX-OS SoftwareImplementing VLANs and TrunksBuilding a Redundant Switched Topology Transitioning to IPv6 Exploring the Routing Process on CiscoNexus SwitchesExploring Routing Protocols on CiscoNexus SwitchesExploring ACLs on Cisco Nexus Switches Reviewing the Cisco Nexus Product FamilyReviewing the Cisco MDS Product FamilyMonitoring the Cisco Nexus 7000 and5000 Series SwitchesDescribing vPCs and Cisco FabricPath inthe Data CenterUsing OTV on Cisco Nexus 7000 Series


Switches Virtualizing StorageVirtualizing Server SolutionsUsing the Cisco Nexus 1000V SeriesSwitchDescribing Fibre Channel StorageNetworkingVerifying Fibre Channel Communicationson Cisco MDS 9000 Series MultilayerSwitches Identifying Connectivity Options for FCoEon the Cisco Nexus 5000Describing Enhanced FCoE Scalabilitywith Cisco Nexus 2232 10GE FabricExtenders Describing the Cisco UCS C-SeriesProduct FamilyConnecting Cisco UCS B-Series BladeServersSetting up an Initial Cisco UCS B-SeriesClusterDescribing Cisco UCS ManagerOperationsDescribing Cisco UCS Manager Pools,Policies, Templates, and Chassis andBlade Power Capping Lab 1-2: Observing the TCP Three-WayHandshakeLab 1-3: Observing Extended PC NetworkInformationLab 2-1: Connecting to Cisco NexusSwitchesLab 2-2: Configuring Cisco NexusSwitchesLab 2-3: Configuring VLANs and TrunksLab 2-4: Verifying and ConfiguringSpanning TreeLab 2-5: Configuring EtherChannelLab 3-1: Converting Decimal to Binary andBinary to DecimalLab 3-2: Classifying Network AddressingLab 3-3: Computing Usable Subnetworksand HostsLab 3-4: Calculating Subnet MasksLab 4-1: Configuring Multilayer Switching Lab 1-2: Connecting to a Cisco Nexus5000 Series Switch Using SSHLab 1-3: Running CLI CommandsLab 1-4: Configuring vPCsLab 1-5: Validating Cisco FabricPathConfigurationLab 1-6: Validating OTV ConfigurationLab 2-1: Verifying Current VDC SettingsLab 2-2: Validating a Cisco Nexus 2000Series Fabric Extender ConfigurationLab 2-3: Validating a Cisco Nexus 1000VSeries Switch ConfigurationLab 3-1: Validating a Cisco MDS 9100Series Multilayer Fabric Switch LicenseLab 3-2: Configuring VSANs and ZoningLab 3-3: Validating FLOGI and FCNSLab 3-3: Viewing the tech-supportCommand OutputLab 4-1: Validating the PhysicalConnections for FCoE


Lab 5-1: Exploring the Cisco UCSManager GUILab 5-2: Creating a Service Profile from aTemplate and Performing VMware ESXi5.0 SAN Boot

lineUnderstanding the Host-to-HostCommunications ModelDescribing Ethernet ConnectionsDescribing Ethernet CommunicationsStandardsDescribing OSI Network Layer AddressingDescribing the TCP/IP Transport LayerDescribing the Packet Delivery ProcessDescribing the Packet Delivery ProcessDescribing Cisco NX-OS SoftwareOperating Cisco NX-OS SoftwareImplementing VLANs and TrunksBuilding a Redundant Switched Topology Transitioning to IPv6 Exploring the Routing Process on CiscoNexus SwitchesExploring Routing Protocols on CiscoNexus SwitchesExploring ACLs on Cisco Nexus Switches Reviewing the Cisco Nexus Product FamilyReviewing the Cisco MDS Product FamilyMonitoring the Cisco Nexus 7000 and5000 Series SwitchesDescribing vPCs and Cisco FabricPath inthe Data CenterUsing OTV on Cisco Nexus 7000 SeriesSwitches Virtualizing StorageVirtualizing Server SolutionsUsing the Cisco Nexus 1000V SeriesSwitchDescribing Fibre Channel StorageNetworkingVerifying Fibre Channel Communicationson Cisco MDS 9000 Series MultilayerSwitches Identifying Connectivity Options for FCoEon the Cisco Nexus 5000Describing Enhanced FCoE Scalabilitywith Cisco Nexus 2232 10GE FabricExtenders Describing the Cisco UCS C-SeriesProduct FamilyConnecting Cisco UCS B-Series BladeServersSetting up an Initial Cisco UCS B-SeriesClusterDescribing Cisco UCS ManagerOperationsDescribing Cisco UCS Manager Pools,Policies, Templates, and Chassis andBlade Power Capping Lab 1-2: Observing the TCP Three-WayHandshakeLab 1-3: Observing Extended PC NetworkInformationLab 2-1: Connecting to Cisco Nexus


SwitchesLab 2-2: Configuring Cisco NexusSwitchesLab 2-3: Configuring VLANs and TrunksLab 2-4: Verifying and ConfiguringSpanning TreeLab 2-5: Configuring EtherChannelLab 3-1: Converting Decimal to Binary andBinary to DecimalLab 3-2: Classifying Network AddressingLab 3-3: Computing Usable Subnetworksand HostsLab 3-4: Calculating Subnet MasksLab 4-1: Configuring Multilayer Switching Lab 1-2: Connecting to a Cisco Nexus5000 Series Switch Using SSHLab 1-3: Running CLI CommandsLab 1-4: Configuring vPCsLab 1-5: Validating Cisco FabricPathConfigurationLab 1-6: Validating OTV ConfigurationLab 2-1: Verifying Current VDC SettingsLab 2-2: Validating a Cisco Nexus 2000Series Fabric Extender ConfigurationLab 2-3: Validating a Cisco Nexus 1000VSeries Switch ConfigurationLab 3-1: Validating a Cisco MDS 9100Series Multilayer Fabric Switch LicenseLab 3-2: Configuring VSANs and ZoningLab 3-3: Validating FLOGI and FCNSLab 3-3: Viewing the tech-supportCommand OutputLab 4-1: Validating the PhysicalConnections for FCoELab 5-1: Exploring the Cisco UCSManager GUILab 5-2: Creating a Service Profile from aTemplate and Performing VMware ESXi5.0 SAN Boot

lineUnderstanding the Host-to-HostCommunications ModelDescribing Ethernet ConnectionsDescribing Ethernet CommunicationsStandardsDescribing OSI Network Layer AddressingDescribing the TCP/IP Transport LayerDescribing the Packet Delivery ProcessDescribing the Packet Delivery ProcessDescribing Cisco NX-OS SoftwareOperating Cisco NX-OS SoftwareImplementing VLANs and TrunksBuilding a Redundant Switched Topology Transitioning to IPv6 Exploring the Routing Process on CiscoNexus SwitchesExploring Routing Protocols on CiscoNexus SwitchesExploring ACLs on Cisco Nexus Switches Reviewing the Cisco Nexus Product FamilyReviewing the Cisco MDS Product FamilyMonitoring the Cisco Nexus 7000 and5000 Series Switches


Describing vPCs and Cisco FabricPath inthe Data CenterUsing OTV on Cisco Nexus 7000 SeriesSwitches Virtualizing StorageVirtualizing Server SolutionsUsing the Cisco Nexus 1000V SeriesSwitchDescribing Fibre Channel StorageNetworkingVerifying Fibre Channel Communicationson Cisco MDS 9000 Series MultilayerSwitches Identifying Connectivity Options for FCoEon the Cisco Nexus 5000Describing Enhanced FCoE Scalabilitywith Cisco Nexus 2232 10GE FabricExtenders Describing the Cisco UCS C-SeriesProduct FamilyConnecting Cisco UCS B-Series BladeServersSetting up an Initial Cisco UCS B-SeriesClusterDescribing Cisco UCS ManagerOperationsDescribing Cisco UCS Manager Pools,Policies, Templates, and Chassis andBlade Power Capping Lab 1-2: Observing the TCP Three-WayHandshakeLab 1-3: Observing Extended PC NetworkInformationLab 2-1: Connecting to Cisco NexusSwitchesLab 2-2: Configuring Cisco NexusSwitchesLab 2-3: Configuring VLANs and TrunksLab 2-4: Verifying and ConfiguringSpanning TreeLab 2-5: Configuring EtherChannelLab 3-1: Converting Decimal to Binary andBinary to DecimalLab 3-2: Classifying Network AddressingLab 3-3: Computing Usable Subnetworksand HostsLab 3-4: Calculating Subnet MasksLab 4-1: Configuring Multilayer Switching Lab 1-2: Connecting to a Cisco Nexus5000 Series Switch Using SSHLab 1-3: Running CLI CommandsLab 1-4: Configuring vPCsLab 1-5: Validating Cisco FabricPathConfigurationLab 1-6: Validating OTV ConfigurationLab 2-1: Verifying Current VDC SettingsLab 2-2: Validating a Cisco Nexus 2000Series Fabric Extender ConfigurationLab 2-3: Validating a Cisco Nexus 1000VSeries Switch ConfigurationLab 3-1: Validating a Cisco MDS 9100Series Multilayer Fabric Switch LicenseLab 3-2: Configuring VSANs and ZoningLab 3-3: Validating FLOGI and FCNSLab 3-3: Viewing the tech-support


Command OutputLab 4-1: Validating the PhysicalConnections for FCoELab 5-1: Exploring the Cisco UCSManager GUILab 5-2: Creating a Service Profile from aTemplate and Performing VMware ESXi5.0 SAN Boot

Más información:

Para más información o para reservar tu plaza llámanos al (34) 91 425 06 60

[email protected]

www.globalknowledge.com/es-es/

Global Knowledge Network Spain, C/ Retama 7, 6ª planta, 28045 Madrid

http://www.globalknowledge.com/es-es/

Cisco CCNA Data Center Boot Camp (Accelerated)€¦ · Reviewing the Cisco MDS Product Family Lab...

Documents

Transcript of Cisco CCNA Data Center Boot Camp (Accelerated)€¦ · Reviewing the Cisco MDS Product Family Lab...