CISCO 2960-S VS CISCO 2960-X VS CISCO 2960-XR

http://www.router-switch.com/Price-cisco-switches-cisco-switch-catalyst-2960_c19

WIDELY USED CISCO 2960 SERIES SWITCH

As the New flagship Cisco 2960 series switch, the new widely successful Catalyst 2K switches with stackable Gigabit Ethernet access switches. So what's the difference between the Cisco 2960-S, Cisco 2960-XR and Cisco 2960-X Series Switches.

BEST WAY TO COMPARE CISCO 2960-S VS CISCO 2960-X

Cisco Catalyst 2960S series switch is very common switch in any environment that has Cisco devices. It also got the ability to do static routers which was a nice feature. While Cisco Catalyst 2960-X switches are the next generation of the world's most widely deployed access switches. The 2960-X provides up to 80 Gbps of stack bandwidth which is 2x more compared to the 2960-S. It is now also possible to stack up to 8 switches compared to the earlier maximum of 4. They are scalable, smart, simple, and secure and at the same time provide investment protection. These switches also provide Layer 3 routing capability, application-aware intelligence, and double the scale.

CISCO 2960-X VS CISCO 2960-XR

The Cisco Catalyst 2960-XR Switch is a fixed-configuration, stackable (with module, not included) Gigabit Ethernet switch that provides enterprise-class features for high bandwidth applications and is designed for operational simplicity to lower total cost of ownership.

Key feature of Cisco 2960-XR: 1.The Cisco hardware routing architecture delivers extremely high-

performance IP routing in the Cisco Catalyst 2960-XR IP-Lite Switches 2.It offers a number of redundancy and resiliency features to prevent

outages and help ensure that the network remains available 3.Cisco Catalyst 2960-XR Switch offers intelligent traffic management

that keeps everything flowing smoothly. 4.The Cisco Catalyst 2960-XR Switch offer a superior CLI for detailed

configuration and administration.

Dual-FRU power supply with integrated fan Layer 3 features with IP Lite feature set Configurable 8 queues per port (standalone) 48 Ether channel groups

DIFFERENCES BETWEEN 2960-X AND -XR COMPARED TO 2960-S

Dual core CPU @ 600 MHz. 2960-S has single core 2960-XR has support for dual power supplies 256 MB of flash for -XR, 128 MB for -X. The S model has

64 MB 512 MB of DRAM compared to 256 for 2960-S 1k active VLANs compared to 255 for 2960-S 48 Etherchannel groups for -XR, 24 for -X and 6 for -S 4 MB of egress buffers instead of 2 MB 4 SPAN sessions instead of 2 32k MACs for -XR, 16k for -X and 8k for -S 24k unicast routes for -XR, 16 static routes for -X and -S