CINE PRO !#$%&%$'(%'#%)*%$'(%+,-. - ScreenInt€¦ · 476 46 522 A B H...

2
OPTIONAL pag 62-63 Kit RF Remote control with external receiver Interface switch 12 volt Low voltage contact interface INCLUDED Ceiling mounting brackets n.1 On/off switcher ENGINEERED LIKE NO OTHER SCREEN IN THE WORLD The CINE PRO is a large dimension electrical screen available from 8 mt. up to 12 mt. of width. Cine Pro is the best choice for cinemas, theatres or auditoriums. It assures the possibility to join the need to have projections and the alternative to play a performance on a stage. The Cine Pro structure is equipped with an aluminium tube which is, at the same time, rolling pipe and bottom bar. The capstan electric motor unit (the heart of the system) which is located in the middle of the structure, transmits, by the steel cables, the rotation of the winding pipe determining the rise or the descent of the cloth in a quiet and safe way. The Screen Int. R&D department has developed a new and unique SAFETY SYSTEM that prevents eventual rolling down of the aluminium tube, in case of accidental failure of the motor or of the steel cables or of the cloth. Available in customized sizes. Screen housing available also in black colour (optional) from 8 mt. to 12 mt. wide CINE PRO

Transcript of CINE PRO !#$%&%$'(%'#%)*%$'(%+,-. - ScreenInt€¦ · 476 46 522 A B H...

Page 1: CINE PRO !#$%&%$'(%'#%)*%$'(%+,-. - ScreenInt€¦ · 476 46 522 A B H C!"#$%&'(")*&+"%"(,-#.#/'&+")/%#/'& 0(123-% 4.1/2-&1%&%5-&$16-%7 & $7$%-+ CINE PRO CLOSED CINE PRO OPEN W Viewing

OPTIONAL pag 62-63

Kit RF Remote control with

external receiver

Interface switch 12 volt

Low voltage contact interface

INCLUDED

Ceiling mounting brackets

n.1On/off

switcher

ENGINEERED LIKE NO OTHER SCREEN IN THE WORLD

The CINE PRO is a large dimension electrical screen available from 8 mt. up to 12 mt. of width.Cine Pro is the best choice for cinemas, theatres or auditoriums. It assures the possibility to join the need to have projections and the alternative to play a performance on a stage.The Cine Pro structure is equipped with an aluminium tube which is, at the same time, rolling pipe and bottom bar.The capstan electric motor unit (the heart of the system) which is located in the middle of the structure, transmits, by the steel cables, the rotation of the winding pipe determining the rise or the descent of the cloth in a quiet and safe way.The Screen Int. R&D department has developed a new and unique SAFETY SYSTEM that prevents eventual rolling down of the aluminium tube, in case of accidental failure of the motor or of the steel cables or of the cloth.

Available in customized sizes.Screen housing available also in black colour (optional)

from 8 mt. to 12 mt. wideCINE PRO

Page 2: CINE PRO !#$%&%$'(%'#%)*%$'(%+,-. - ScreenInt€¦ · 476 46 522 A B H C!"#$%&'(")*&+"%"(,-#.#/'&+")/%#/'& 0(123-% 4.1/2-&1%&%5-&$16-%7 & $7$%-+ CINE PRO CLOSED CINE PRO OPEN W Viewing

476

4652

2

A

B

H

C

Hoist group motorCeiling mounting

bracket

Glance at the safety system

CINE PRO CLOSED

CINE PRO OPEN

W

www.screenint.com

Viewing area (WxH)

Overall dimensions

A - C

Approx. net weight

(Kg)

Approx. gross weight

(Kg)

Rollingdown/up time

(sec)

PROFESSIONALCINE PRO

Lifting rings

CEILING MOUNTINGBRACKETS

NOTE: The left and the right an-choring points have to be fixed at the same distance from each end side of the cabinet.The fixing distance has to be maximum 50 cm from left and right end sides of the cabinet.

- Motor Characteristics:· Power 85 Nm· Speed 17 rpm· Power supply 230V / 50 Hz· Consumption 450 W· Certification IMQ

Warranty: 5 years on the motor - 24 months on the other components

The

mea

sure

s in

the

draw

ings

are

exp

ress

ed in

milli

met

res.

ELECTRIC SCREENS

PROJECTION CLOTHSFront projection

surfaces Gai

n

FRONT VIEW HOUSING SIDE VIEWSIDE VIEW

280524

478

67

4690

136

6868

8353

90

800 x 450 848 - 840 227 491 59900 x 500 948 - 940 249 554 651000 x 550 1048 - 1040 270 614 711100 x 600 1148 - 1140 292 680 781200 x 650 1248 - 1240 314 746 85

White 1.2Microholes 1.0

DIMENSIONS measures in cm

67

343

8353

136