NOTES:

Size: Layers This Sheet:

Scale: Sheet of

Title:stringed instrument design

liutaio

Mottolahttp://LiutaioMottola.com

Drawn by: Date:

Copyright (c) 2009 by R.M. Mottola

3. Brace profiles shown are rough. Morecarving may be necessary.

2. The fingerboard tapers from 1/4"thick at the nut end to 3/16" at the 12thfret on the bass side, 7/32'' on the treble side.Taper continues along the entirelength.

1. Headstock and fingerboard in the top vieware shown as if rotated parallel to the top.

4. Back center reinforcement is 1mm thick.

5. Bridge patch is 0.6mm thick, tapering tozero at the ends.

6. Soundhole reinforcement strips are 1.5mmthick.

7. Cutoff bars are 4.5mm high.

http://creativecommons.org/licenses/by-nc/3.0/

This plan is made available under the terms of anAttribution-Noncommercial Creative Commons license. See thelicense at

r 30'r 15'

15

90

316 in

14 in

86