CIMARRON HIGH PERFORMANCE LED area/site … HIGH PERFORMANCE LED area/site lighting 2 – CIMARRON...
-
Upload
trinhkhuong -
Category
Documents
-
view
216 -
download
1
Transcript of CIMARRON HIGH PERFORMANCE LED area/site … HIGH PERFORMANCE LED area/site lighting 2 – CIMARRON...
CIMARRON HIGH PERFORMANCE LED a rea/s i te l i gh t ing
DIE-CAST ARCHITECTURAL LUMINAIRES
Precision Optics TYPE II TYPE III TYPE IV
TYPE V WIDE TYPE V SHORT TYPE V MEDIUM
Individual optical lenses designed to distribute light where it is needed for Type II, III, IV and V lighting distributions.
Two Sizes...Endless Possibilities
Spaulding Lighting’s most popular LED area/
site lighter is now available in two sizes. Built
for superior LED performance and packed
with features, the original Cimarron CL1 and
the smaller CL1S pedestrian scale luminaires
provide a perfect balance of design, form,
function and energy-efficiency.
CL1S
CL1
CIMARRON HIGH PERFORMANCE LED a rea/s i te l i gh t ing
2 – CIMARRON D I E - C A S T A R C H I T E C T U R A L L U M I N A I R E S
DIE-CAST ARCHITECTURAL LUMINAIRES
HID LED
Application Guidelines
LED Design and Performance plus Backlight ControlThe Cimarron LED family of luminaires are manufactured with industry leading optics to distribute light where it is
specifically needed for area/site, pedestrian, parking lot and pathway applications. Cimarron LED luminaires deliver the
following advantages over traditional lighting sources:
- Energy-efficiency – lower operating costs
- Superior light level uniformity – improved visual acuity
- Improved pole and fixture spacing – reduces installation costs
- Long source life – reduces maintenance costs
- Near maintenance free operation
- Enhanced control options for increased energy savings and customized lighting
For those LED projects that require minimal light behind the pole, Spaulding Lighting has a solution – ECL1PSE Backlight
Control. This unique system, designed specifically for LED lighting, will reduce the light spill behind the pole.
- Reduce light 85% behind the pole – industry leading performance
- No change to fixture appearance or EPA
- Achieves impressive Backlight-Uplight-Glare (BUG) rating
- Neighbor-friendly lighting
- 2012 IES Progress Report Award winner
Type IV with Backlight Control Type IV without Backlight Control
Spaulding LED CL1S is designed for pedestrian scale applications such as municipal, parks and recreation, school and healthcare campuses. Typical mounting heights are from 12-20ft.
Spaulding LED CL1 is designed for area/site lighting applications including parking, auto dealerships, retail and large parking areas. Typical mounting heights are from 18-40ft.
Up to 40ft
Up to 20ft
ECL1PSE Backlight Control
Application Guidelines CL1
CL1S
CIMARRON D I E - C A S T A R C H I T E C T U R A L L U M I N A I R E S – 3
Spaulding Lighting’s Cimarron LED CL1S pedestrian scale luminaire is ideally suited for mounting heights up to 20 ft and is available in 54 optical configurations.
For more information on the Cimarron LED CL1S use your smart phone to scan this code
PEDESTRIAN SCALE ARCHITECTURAL LUMINAIRE
Control ReadyThe Cimarron LED CL1S uses less than 50% of the energy of an equivalent HID at full brightness. Additional energy-saving options include: • Continuous Dimming – lowers energy consumption and light output from 100% to 10% with a 0-10V input (dimmable drivers standard) • Sensor control option for 30%, 50% or 70% light output and energy savings for off peak activity hours
CL1SCIMARRON HIGH PERFORMANCE LED a rea/s i te l i gh t ing
4 – CIMARRON D I E - C A S T A R C H I T E C T U R A L L U M I N A I R E S
• 10-18 ft mounting heights• 3,500 lumens• 97 LPW efficiency
• 12-18 ft mounting heights• 6,800 lumens• 97 LPW efficiency
• 15-20 ft mounting heights• 11,000 lumens• 101 LPW efficiency
Unique DesignIntegral arm is part of the Cimarron LED CL1S sleek design. Coupled with the easy to install adapter plate make this luminaire a win-win for ease of installation and servicing.
High Brightness LED TechnologyDesign flexibility is optimized with 16, 32 and 48 high brightness LED light engine configurations in IES Type II, III, IV and V distributions with factory rotatable optics available for Type II, III and IV distributions.
Quick-Mount InstallationThe Cimarron CL1S installation features: 1. Quick-mount plate attaches to pole with two 3/4” bolts 2. 4 - slot hex 1/4” captured screws secure luminaire door to top 3. Safety-latch holds luminaire door to prevent “free swing” door 4. Two stage hinge mechanism built into integral arm 5. Quick-connect wiring for a simplified, hassle-free installation
16
32
48
1
3
21
4 5
O P T I C A L C O N F I G U R AT I O N S
CIMARRON D I E - C A S T A R C H I T E C T U R A L L U M I N A I R E S – 5
Control ReadyThe Cimarron LED uses less than 50% of the energy of an equivalent HID at full brightness. Additional energy-saving options include:
• Bi-Level Control – 2 circuits allow for half of the LEDs to be turned off during off-peak hours • Continuous Dimming – lower energy consumption and light output from 100% to 10% with a 0-10V input • Sensor control option for 30%, 50% or 70% light output and energy savings for off peak activity hours
For more information on the Cimarron LED use your smart phone to scan this code
6 – CIMARRON D I E - C A S T A R C H I T E C T U R A L L U M I N A I R E S
Spaulding’s most popular area site lighting fixture delivers energy efficiency, safety and security. Ready to meet today’s outdoor site lighting needs – Cimarron LED features high brightness LEDs, providing superior optical performance while reducing energy consumption and lowering maintenance costs. Cimarron LED – a perfect balance of design, form, function and efficiency.
CL1CIMARRON HIGH PERFORMANCE LED a rea/s i te l i gh t ing
A R C H I T E C T U R A L L U M I N A I R E
Unique DesignKeeping the same sleek profile and aesthetic lines as the HID generation, the Cimarron LED incorporates a unique vertically-finned die-cast housing that optimizes heat transfer to keep the fixture cool and maximize component life.
Choose from traditional straight, architectural upswept die-cast aluminum arm designs or optional mast fitter. The arm is shipped installed to the fixture for ease of installation. Fixture installation and supply wire connections are made through the wiring access door located in the arm, so there is no need to open the fixture during installation.
Maintenance Free - Vandal ResistantThe Cimarron LED will perform virtually maintenance-free. In addition to the unique housing designed to reduce unwanted collection of debris, the fixture is designed to IP65 and providing long life – there is no need to touch it for many years. Additionally, Hubbell Lighting’s durable Lektrocote® TGIC thermoset polyester powder paint finish assures long life and maintenance-free service. Optional vandal resistant guard provides additional protection when necessary.
High brightness LED technologyDesign flexibility is optimized with 72 high brightness LED light engine configurations in IES Type II, III, IV and V distributions. Ideal for mounting heights from 12 ft to 40 ft.
• 12-18 ft mounting heights • Single light engine• 7,000 lumens• 101 LPW efficiency
• 18-25 ft mounting heights • Two light engines • 13,000 lumens• 95 LPW efficiency
• Up to 40 ft mounting heights • Three light engines • 27,000 lumens• 98 LPW efficiency
CIMARRON D I E - C A S T A R C H I T E C T U R A L L U M I N A I R E S – 7
O P T I C A L C O N F I G U R AT I O N S
ORDERING INFORMATION
Series CCT Distribution DriveCurrent
ColorVoltage OptionsNumber of LEDs
Mounting
SERIESCL1S Cimarron LED Pedestrian Scale MOUNTINGA 4” Straight arm attached to housing complete with quick-mount plate
NUMBER OF LEDS 16L 16 High brightness LEDs32L 32 High brightness LEDs48L 48 High brightness LEDs
VOLTAGEU2 Universal 120V-277V, 50/60 Hz11 120V21 208V31 240V41 277V5 480V, 60 HzF 347V, 60 HzE3 220V, 50 Hz CCT3K 3000K, 80 CRI4K 4000K, 70 CRI5K 5100K, 67 CRIAM Amber available for “Turtle friendly” applications (pending, consult factory)
DISTRIBUTION2 Type II3 Type III4 Type IV5M Type V Medium5S Type V Short5W Type V Wide2L Type II Rotated 90˚ left3L Type III Rotated 90˚ left4L Type IV Rotated 90˚ left2R Type II Rotated 90˚ right3R Type III Rotated 90˚ right4R Type IV Rotated 90˚ right(see page 9 for assistance in selecting rotated optics) DRIVE CURRENT Leave blank for 700mA (standard) 035 350mA (32L, 48L) 053 525mA (32L), 520mA (48L) COLORDB Dark Bronze BL Black WH White GR Gray PS Platinum Silver RD Red (premium color)FG Forest Green (premium color)CC Custom Color (premium color)
OPTIONSBC4 Backlight controlCD2,6 Continuous dimmingF(X)2,3 Fusing (replace X with voltage: 1-120V, 2-208V, 3-240V, 4-277V, 5-480V, 6-347V)RPA3 3” Round pole adapterRPA4 4” Round pole adapterTB Terminal blockWB Wall bracketWHB6 White LED bezel CONTROL OPTIONSSC0 Motion control, no light output/ On-Off controlSCP Programmable motion control, factory default is 50% PR(X) NEMA Photo cell receptacle (replace X with voltage: U=120-277, 5=480, 6 =347)1 Select only when using voltage specific options F, WIH2 Fuse option not available with U voltage3 Select F3 fusing option for 220V4 Not recommended for Type 5S, 5M or 5W5 Order to match larger Cimarron CL1 with white bezels6 Dimming leads accessible for connection to third party dimming systems
ORDERING EXAMPLE
CL1S - A - - - - - - -
SURGE PROTECTIONTo protect your investment, the Cimarron LED area lighter is protected from electrical surges up to 20KA
LISTINGS AND RATINGS• Listed to UL1598 for use in wet locations• DesignLights Consortium qualified• IP65• -40˚C to 40˚C Ambient temperature rating
8 – CIMARRON D I E - C A S T A R C H I T E C T U R A L L U M I N A I R E S
FIXTURE DIMENSIONS
A B C D E F G H EPA Weight
12" 305mm
16.312"414mm
4"102mm
4.5"114mm
3"76mm
20.312"515mm
4.13"105mm
5.625"143mm
.45 ft2
.14 m2
19 lbs.8.62 kg
5.6254.130
20.312
5.625
16.312
3.000
4.500
12.000
16.3124.000
3.000
3.000
4.000 16.312
4.130
12.000
4.500
12.000
A
B B
C
EED D
A
C
5.6254.130
20.312
5.625
16.312
3.000
4.500
12.000
16.3124.000
3.000
3.000
4.000 16.312
4.130
12.000
4.500
12.000
G
F
H
5.6254.130
20.312
5.625
16.312
3.000
4.500
12.000
16.3124.000
3.000
3.000
4.000 16.312
4.130
12.000
4.500
12.000
G
E
PENDINGLED Product Partner
*
LEKTROCOTE® FINISH PROCESSLektrocote® is a proprietary process where the thermosetting, acid-functional
polyester powder resin is electrostatically applied only after a thorough cleaning
process. Luminaires receive a five-step wash with both acid and alkaline-based
liquid cleaners followed by the deposit of a thin layer of proprietary compound to
promote maximum corrosion-resistance and paint adhesion. Finally, the decora-
tive finish coat is applied.
Lektrocote® meets or exceeds the following standards:
ASTM B-117 1000 hour salt spray testASTM B-2247 1000 hour humidity testASTM D-2794 Impact test resistant to 160 inch poundsASTM D-522 Flexibility testAAMA 603 Blister/adhesion test
COLOR SELECTIONS
• 5 standard (Bronze, Black, White, Gray, Platinum Silver)
• 2 premium (Red, Forest Green) and Custom Colors (consult factory) are available
Note: • Actual colors may vary due to printing process
• All colors are textured except Platinum Silver and Red
CIMARRON D I E - C A S T A R C H I T E C T U R A L L U M I N A I R E S – 9
CIMARRON ACCESSORIES Catalog # Description CL1S-RPA3-ACC-XX1 Round pole adapter for (31⁄4 - 33⁄4”)CL1S-RPA4-ACC-XX1 Round pole adapter for (37⁄8 - 41⁄2”)WB-CR-XX Wall bracket
ACCESSORIES (order separately)
ADDITIONAL ACCESSORIES (order separately) Catalog # DescriptionPTL-1 Photocontrol - twist-lock cell (120V) PTL-8 Photocontrol - twist-lock cell (120-277V) PTL-5 Photocontrol - twist-lock cell (480V) PTL-6 Photocontrol - twist-lock cell (347V) PSC Shorting cap - twist-lock 1 Replace XX with color choice, eg.: DB for Dark Bronze
TENON TOP POLE BRACKET ACCESSORIES (ORDER SEPARATELY) Catalog # Description EPA WEIGHTSETA-XX1 4” Square pole top tenon adapter 0.4 ft2 20 lbs. 2 3/8” OD slipfitter for max. four fixtures (90°) 0.04 m2 9 kgs.
RETA-XX1 4” Round pole top tenon adapter. 2 3/8” OD 0.2 ft2 20lbs. slipfitter for max. four fixtures (90°) 0.02 m2 9 kgs. TETA-XX1 Three sided pole top tenon adapter 0.2 ft2 20lbs. 2 3/8” OD slipfitter for max. three fixtures 0.02 m2 9 kgs. (120°)
SETA-XX TETA-XXRETA-XX
SETA 4” RETA 4”TETA 4
9.5 9.5
SETA 4” RETA 4”TETA 4
9.5 9.5
SETA 4” RETA 4”TETA 4
9.5 9.5
4" 4" 5.5"
9.5" 9.5" 9.5"
FIXTURE MOUNTING Square & Round
CAST ADAPTER
CAST ARMFIXTURE
POLE COVERPOLE COVER
POLE TOP
.875
Ø .875HOLE
3.875
3.5
Ø .5633 HOLES
ROUND POLE
SQUARE POLE
#2 DRILL PATTERN FOR POLES
NUT PLATE
NUT PLATE
QUICK-MOUNT PLATE
QUICK-MOUNTPLATE
SET SCREW
.579
2.625
4.9624.962
.875
MOUNTINGBOLTS
3.5
CAST ADAPTER
CAST ARMFIXTURE
POLE COVERPOLE COVER
POLE TOP
.875
Ø .875HOLE
3.875
3.5
Ø .5633 HOLES
ROUND POLE
SQUARE POLE
#2 DRILL PATTERN FOR POLES
NUT PLATE
NUT PLATE
QUICK-MOUNT PLATE
QUICK-MOUNTPLATE
SET SCREW
.579
2.625
4.9624.962
.875
MOUNTINGBOLTS
3.5
CAST ADAPTER
CAST ARMFIXTURE
POLE COVERPOLE COVER
POLE TOP
.875
Ø .875HOLE
3.875
3.5
Ø .5633 HOLES
ROUND POLE
SQUARE POLE
#2 DRILL PATTERN FOR POLES
NUT PLATE
NUT PLATE
QUICK-MOUNT PLATE
QUICK-MOUNTPLATE
SET SCREW
.579
2.625
4.9624.962
.875
MOUNTINGBOLTS
3.5
FIXTURE MOUNTING Factory Rotated Optics
2L Type II rotated 90˚ left3L Type III rotated 90˚ left4L Type IV rotated 90˚ left
2R Type II rotated 90˚ right3R Type III rotated 90˚ right4R Type IV rotated 90˚ right
For proper light distribution and performance, rotated optics must be mounted as referenced in illustration. Consult instruction sheet included when mounting.
ORDERING INFORMATION
Series CCT Distribution DriveCurrent
ColorVoltage OptionsNumber of LEDs
Mounting
ORDERING EXAMPLE
CL1 - - - - - - - -
SURGE PROTECTIONTo protect your investment, the Cimarron LED area lighter is protected from electrical surges up to 20KA
LISTINGS AND RATINGS• Listed to UL1598 for use in wet locations• IP65• -40˚C to 40˚C Ambient temperature rating• DesignLights Consortium qualified
10 – CIMARRON D I E - C A S T A R C H I T E C T U R A L L U M I N A I R E S
FIXTURE DIMENSIONS
A B C D E F G EPA Weight
6 3/4" 171mm
21 3/4"552mm
16"406mm
6 5/8"168mm
6 5/16"160mm
5 5/8"143mm
6 1/8"155mm
1.3 ft2
.12m2
45 lbs.20.4 kg
Upswept Arm
Straight Arm
A
A
B
B C
D
E
F
G
LED Product Partner
SERIESCL1 Cimarron LED MOUNTINGA Arm mount construction (6” straight rigid arm ships attached & acceptable for 90° configurations) AD Decorative arm mount construction (6” decorative upswept arm acceptable for 90° configurations) MAF Mast arm fitter for mounting to standard 2 3/8” mast arm bracket, includes 6” straight arm (Can also be ordered as an accessory)
NUMBER OF LEDS 90L1 90 High brightness LEDs60L1 60 High brightness LEDs30L 30 High brightness LEDs
VOLTAGEU3 Universal 120V-277V, 50/60 Hz51 480V, 60 HzF1 347V, 60 HzE4 220V, 50 Hz CCT3K 3000K, 80 CRI4K 4000K, 70 CRI5K 5000K, 67 CRIAM Amber available for “Turtle friendly” applications (consult factory)
DISTRIBUTION2 Type II3 Type III4 Type IV5M Type V Medium5S Type V Short5W Type V Wide2L Type II Rotated 90˚ left3L Type III Rotated 90˚ left4L Type IV Rotated 90˚ left2R Type II Rotated 90˚ right3R Type III Rotated 90˚ right4R Type IV Rotated 90˚ right
DRIVE CURRENT Leave blank for 700mA (standard)105 1050 mA (use with 90L – higher lumen output)035 350mA Amber CCT only COLORDB Dark Bronze BL Black WH White GR Gray PS Platinum Silver RD Red (premium color)FG Forest Green (premium color)CC Custom Color (premium color) OPTIONSBC6 Backlight controlBL1,2,5 Bi-level controlCD2 Continuous dimming
OPTIONS WB Wall bracketRPA3 3” Round pole adapterRPA4 4” Round pole adapterRPA5 5” Round pole adapterRPA6 6” Round pole adapterF(X)3,4 Fusing (replace X with voltage: 1-120V, 2-208V, 3-240V, 4-277V, 5-480V, 6-347V)VG Vandal guardSSB Stainless Steel LED Bezel CONTROL OPTIONSSC0 Motion control, no light output/ On-Off controlSC30 Motion control, dimmed to 30% light outputSC50 Motion control, dimmed to 50% light outputSC70 Motion control, dimmed to 70% light outputPRU5 NEMA photocell receptacle - 120-277VPR55 NEMA photocell receptacle - 480VPR65 NEMA photocell receptacle - 347V1 BL option for 90L and 60L and 120-277V only2 BL & CD cannot be combined3 Fuse option not available with universal voltage4 Select F3 fusing option for 220V5 Photocell receptacle not available with BL option6 Recommended for Type II, III and IV only
FIXTURE MOUNTING Factory Rotated Optics
2L Type II rotated 90˚ left3L Type III rotated 90˚ left4L Type IV rotated 90˚ left
2R Type II rotated 90˚ right3R Type III rotated 90˚ right4R Type IV rotated 90˚ right
For proper light distribution and performance, rotated optics must be mounted as referenced in illustration. Consult instruction sheet included when mounting.
*
COVER
CAST ADAPTER
CAST ADAPTER
THREADED RODGASKET
FLAT WASHER
SCREWCOVER
LOCKWASHERHEX NUT
RETAINER WASHER
ARM
CAST ARMFIXTURE
TOHOUSING(3-HOLE PATTERN END)
SQUARE POLE COVER
POLE COVERPOLE COVER
POLE TOP
.875
Ø .875HOLE
3.875
3.5
Ø .5633 HOLES
ROUND POLE
ROUND POLE
SQUARE POLE
SQUARE & ROUND POLES UPSWEPT ARM MOUNTSQUARE & ROUND POLES
#2 DRILL PATTERN FOR POLES
NUT PLATE
NUT PLATE
NUT PLATE
SQUARE POLE
LEKTROCOTE® FINISH PROCESSLektrocote® is a proprietary process where the thermosetting, acid-functional
polyester powder resin is electrostatically applied only after a thorough cleaning
process. Luminaires receive a five-step wash with both acid and alkaline-based
liquid cleaners followed by the deposit of a thin layer of proprietary compound to
promote maximum corrosion-resistance and paint adhesion. Finally, the decora-
tive finish coat is applied.
Lektrocote® meets or exceeds the following standards:
ASTM B-117 1000 hour salt spray test
ASTM B-2247 1000 hour humidity test
ASTM D-2794 Impact test resistant to 160 inch pounds
ASTM D-522 Flexibility test
AAMA 603 Blister/adhesion test
COLOR SELECTIONS
• 5 standard (Bronze, Black, White, Gray, Platinum Silver)
• 2 premium (Red, Forest Green) and Custom Colors (consult factory) are available
Note: • Actual colors may vary due to printing process
• All colors are textured except Platinum Silver and Red
CIMARRON D I E - C A S T A R C H I T E C T U R A L L U M I N A I R E S – 11
Catalog # Description CR-RPA3-XX1 Round pole adapter for straight arm (31⁄4 - 33⁄4”)CR-RPA4-XX1 Round pole adapter for straight arm (37⁄8 - 41⁄2”)CR-RPA5-XX1 Round pole adapter for straight arm (5”)CR-RPA6-XX1 Round pole adapter for straight arm (6”)CRD-RPA2-XX1 Round pole adapter for upswept arm (23⁄4 - 31⁄8”)CRD-RPA3-XX1 Round pole adapter for upswept arm (31⁄4 - 33⁄4”)CRD-RPA4-XX1 Round pole adapter for upswept arm (37⁄8 - 41⁄2”)CRD-RPA5-XX1 Round pole adapter for upswept arm (5”)CRD-RPA6-XX1 Round pole adapter for upswept arm (6”)WB-CR-XX1 Wall bracketTPLB-XX1 Twin parallel luminaire bracketMAF-CL-XX2 Horizontal mast arm fitter for 2 3/8” OD arm. Mounts to standard 6” arm (ordered with fixture)
ACCESSORIES (order separately)
ADDITIONAL ACCESSORIES Catalog # DescriptionPTL-1 Photocontrol - twist-lock cell (120V) PTL-8 Photocontrol - twist-lock cell (120-277V) PTL-5 Photocontrol - twist-lock cell (480V) PTL-6 Photocontrol - twist-lock cell (347V) PSC Shorting cap - twist-lock
MOUNTING ACCESSORIES (order separately) Catalog # Description EPA WEIGHTARM-CL-K-TA-XX1 Adjustable mounting arm for single – 5 lbs. fixture (2-3/8 tenon) 2.3 kgs.ARM-CL-TK-TA-XX1 Adjustable mounting arm for two – 7 lbs. fixtures at 180˚ (2-3/8 tenon) 3.2 kgs.ARM-CL-K-S-XX1 10” adjustable arm .5 (.05) 5.75 (2.6)1 Replace XX with color choice, eg.: DB for Dark Bronze2 Fixture must include standard 6” straight arm
TENON TOP POLE BRACKET ACCESSORIES Catalog # Description EPA WEIGHTSETA-XX1 4” Square pole top tenon adapter 0.4 ft2 20 lbs. 2 3/8” OD slipfitter for max. four fixtures (90°) 0.04 m2 9 kgs.
RETA-XX1 4” Round pole top tenon adapter. 2 3/8” OD 0.2 ft2 20lbs. slipfitter for max. four fixtures (90°) 0.02 m2 9 kgs. TETA-XX1 Three sided pole top tenon adapter 0.2 ft2 20lbs. 2 3/8” OD slipfitter for max. three fixtures 0.02 m2 9 kgs. (120°)
SETA-XX TETA-XXRETA-XX
SETA 4” RETA 4”TETA 4
9.5 9.5
SETA 4” RETA 4”TETA 4
9.5 9.5
SETA 4” RETA 4”TETA 4
9.5 9.5
4" 4" 5.5"
9.5" 9.5" 9.5"
COVER
CAST ADAPTER
CAST ADAPTER
THREADED RODGASKET
FLAT WASHER
SCREWCOVER
LOCKWASHERHEX NUT
RETAINER WASHER
ARM
CAST ARMFIXTURE
TOHOUSING(3-HOLE PATTERN END)
SQUARE POLE COVER
POLE COVERPOLE COVER
POLE TOP
.875
Ø .875HOLE
3.875
3.5
Ø .5633 HOLES
ROUND POLE
ROUND POLE
SQUARE POLE
SQUARE & ROUND POLES UPSWEPT ARM MOUNTSQUARE & ROUND POLES
#2 DRILL PATTERN FOR POLES
NUT PLATE
NUT PLATE
NUT PLATE
SQUARE POLE
FIXTURE MOUNTING Square & Round
MAF – HORIZONTAL MAST ARM FITTER
MAL-KF-X
MAL-TK-X
3.30
5.621.16
5.59
3.401.95
1.953.89
.83
5.621.161.95
3.89
5.59
3.401.95
2.50
CIMARRON ACCESSORIES
Mexico Hubbell De Mexico, S.A. DE.CV Av. Insurgentes Sur # 1228, 8th FloorCol. Tlacoquemecatl del Valle • 03200 Mexico, D.F. www.hubbell.com.mx
United States Hubbell Lighting, Inc. 701 Millennium BoulevardGreenville, SC 29607 www.hubbelllighting.com
CanadaHubbell Canada 870 Brock Road Pickering, Ontario L1W 1Z8 www.hubbell-canada.com
ALERA LIGHTING
ARCHITECTURAL AREA LIGHTING
BEACON PRODUCTS
COLUMBIA LIGHTING
COMPASS PRODUCTS
DEVINE LIGHTING
DUAL-LITE
HUBBELL BUILDING AUTOMATION
HUBBELL INDUSTRIAL LIGHTING
HUBBELL OUTDOOR LIGHTING
KIM LIGHTING
KURT VERSEN
LIGHTCONTROL
PRESCOLITE
SPAULDING LIGHTING
SPORTSLITER SOLUTIONS
STERNER LIGHTING SYSTEMS
REV A 2.15 SPD0035Due to our continued efforts to improve our products, product specifications are subject to change without notice.