1. METALS An indepth Study of Chromium By Ben DeBortoli, Joe McDonogh & Tim Chow

2. Chromiums use through history

Chromiums most common use throughout history has been the production of various ferrous alloys (alloys containing iron) with the most common by far being the alloy ferrochromium

Chromium is also used to make:

3. paint up to the 1980s 4. Elevators 5. Escalators 6. Barbeques 7. AeroplaneFrames 8. And many other things 9. Activity & Ease of Refinement

In relation to Chromiums uses:

• Chromium does not react easily; it possesses passivation, which makes it highly unreactive

• It does not corrode or oxidise easily

• • Therefore it is used to build & plate things to protect them from corrosion and oxidation

• Chromium ore (chromite) has a high abundance, and chromium is easy to extract

• • The relative ease of refinement allows chromium to be widely used

10. Extraction Process of Chromium

Chromium is extracted commercially from chromite (chromium oxide), which is found naturally

Chromite has the formula Cr 2 O 3

Chromium is extracted using the Thermite Process in which a reduction/oxidation reaction takes place with aluminium

Chromite (chromium oxide) reacts with aluminium. The chromite is reduced to form pure chromium, and the aluminium is oxidised to form aluminium oxide

Cr 2 O 3(s)+ 2Al (s)Al 2 O 3(s)+ 2Cr (s)

Chromite 11.

Energy input involved:

• The Thermite Process requires substantial heat energy

• This energy drives the reaction

• In turn the reaction produces a substantial amount of heat

• Therefore energy input is necessary to successfully extract chromium from its ore

Extraction Process of Chromium A typical thermite reaction 12. Common Alloys of Chromium

Chromoly:

- A Range of low alloy steels

- Advantage over aluminium is more tensile strength and malleability

- Disadvantage to aluminium is extra weight and does not resist corrosion asstainless steel does

- Used in bicycle frames and race-car roll cages

Chromel:

- Made up of roughly 90% nickel and 10% chromium

- resists high temperatures (1100C) and high tensilestrength

- used to make positive conductors for a type of temperature sensor know as a thermocouple

Chromel A:

-Variation of Chromel, contains 80% nickel and 20 % chromium and has high resistance to corrosion, high temperatures and oxidation

13. Common Alloys of Chromium

Stellite:

- Formed from a variety of cobalt-chromium alloys designed to wear resistance

- Completely non-corrosive and non-magnetic

- Cuts things at high temps

- Expensive to produce due to extreme durablity, done by grinding rather than cutting

- used in saw teeth, hard facing, acid-resistant machine parts, improved quality of poppet valves, valve seats and internal combustion engines greatly. Also used in M60 machine guns, starting from the chamber as well as jet turbine engine blades

Ferrochrome:

- This alloy of chromium is 50%-70% chromium, alloyed with iron

- 80% of ferrochrome is used in the production of stainless steel

- Usually used in areas of specialist productions like engineering. A high Cr to Fe ratio is needed and minimum amounts of other elements such as Sulfur, Phosophorus and titanium are important

- This production is done in small furnices rather than large

Ferrochrome 14. Common Alloys of Chromium

Stainless Steel:

- Most common alloy which chromium is present in

- Resistance to heat, malleable, resistance to corrosion, cost effective and resistance to water and oxidation

- Many different types due to the ease amounts of each metal can be varied

-Core metals are chromium, iron, aluminium and titanium

-Stainless steel is used to make cutlery, cooking utensils, pots and pans, furniture, shelters, subway trains, fuel and chemical containers, piping and much more

15. Availability of Metals

The availability of metals has increased in the past 200 years

This is due to:

• The discovery of more ores and metals

• Advances in technology

• • It is easier to locate ore bodies now than 200 years ago

• • New processes to extract metals from their ores have been discovered, eg the Bayer Process

• • The industrial revolution

• • • Mass production and extraction of metals began

• Due to these advances, it is easier to extract and produce metals. Therefore their availability has increased as these advances are made

16. The Recycling of Chromium

Chromium is currently not recycled on the large scale due to:

• The abundance of chromium ores and their ability to satisfy human needs for many hundreds of years

• The relative ease associated with extracting chromium

However in the future a need may arise to recycle chromium:

• as chromium ores become depleted

• as energy conservation becomes more of an issue

But in the short term and at present there is no need to recycle chromium