Chrome / Dresser

505-831-6686TOLL FREE

1-855-831-6686

WWW.

ONLINE.COM

14/114

DRESS & CUSTOM ITEMS, INCLUDING DECORATIVE

NUTS, BOLTS, & FASTENERS

14/214

MOTOR SETS — SMOOTH ALLEN HEADS

Knurls have been removed by centerlessgrinding process. This ensures head pur-chase contact area is not compromised.

NOTE: If the kits do not contain allen headsor if they are hidden in the application they

will not be smooth.

PART

NO. YEAR MODEL DESCRIPTION

TWIN CAM 88

40-585 1999/2001 TC Dyna® Complete engine set. Smooth.

BIG TWIN

40-9 1948/1957 Pan with Allen head screws for cam, primary, pan covers, lifter base, generator, timing plug, top front & rear short screws motor mount and inner primary.

40-12 1966/1969 All 74” Shovel Allen head screws for cam, primary, inner primary, lifter base, generator, timing plug, top front &rear motor mount and header mount.

40-7 1970/1976 4 Speed FX Allen head screws for cam, primary, inner primary, lifter base, top front & rear motor mount,& FLH timing plug and point cover.

40-6 1977/1984 4 Speed FX Allen head screws for cam, primary, lifter base, header mount, top front & rear motor mount, inner & FLH primary, timing plug, and point cover.

40-1 1982 & 1983 All FXR Allen head screws for cam, primary, point cover, clutch inspection cover, top front & rear motor mount, forward chain cover, lifter base, inner primary, timing plug and header mount.

40-2 1985 4 Speed Evo.® Allen head screws for cam, primary, inner primary, point cover, timing plug, rocker box, lifter base, 1984 & 1985 FXST motor mount and header mount.

40-4 1984/1986 5 Speed Evo.® Allen head screws for cam, primary, rocker box, lifter base, inner primary, timing plug, motor except FXST mount and point cover.

40-3 1987 & 1988 FXST & FLST Allen head screws for cam, primary, rocker box, lifter base, inner primary, timing plug, motormount and point cover.

40-5 1987/1992 Big Twin Allen head screws for cam, primary, rocker box, lifter base, inner primary, timing plug, motor except Softail® mount, and point cover.

40-13 1989/1993 FXST & FLST Allen head screws for cam, inner & outer primary covers, point cover, timing plug, rocker box,1991/1993 FXWG lifter base, top motor mount, transmission end cover and transmission bearing support plate.

SPORTSTER®

40-20 1957/1969 XLCH Allen head screws for cam, primary, lifter base, magneto cover, generator, sprocket cover, rocker box and top motor mount.

40-19 1957/1966 XLH Allen head screws for cam, primary, lifter base, magneto cover, generator, sprocket cover,rocker box and top motor mount.

40-18 1967/1970 XLH Allen head screws for cam, primary, magneto cover, top motor mount, lifter base. sprocket cover, 1970 XLCH rocker box and generator mount.

40-17 1971/1976 XL Allen head screws for cam, primary, rocker box, lifter base. top motor mount, generator mount,sprocket cover and point cover.

40-14 1977/E. 1984 XL Allen head screws for cam, primary, rocker box, lifter base, top motor mount, point/magnetocover and generator mount.

40-15 Late 1984 Iron Head Allen head screws for cam, primary, rocker box, lifter base, top motor mount, oil filter mount& 1985 Sportster® and alternator model point/magneto cover.

40-16 1986/1990 XL Evolution® Allen head screws for cam, primary, rocker box, lifter base, top motor mount, oil filter mountand point cover.

40-21 1991/1993 XL Allen head screws for cam cover, primary, rocker box, front upper & top center motor mount,lower front motor mount, sprocket cover inspection, crankcase, right side crankcase, shifter,rear master cylinder mount, timing hole plug and point cover.

14/3

Knurls have been removed by centerless grinding process. This ensures head purchase contact area isnot compromised. NOTE: If the kits do not contain allen heads or if they are hidden in the

application they will not be smooth.

SMOOTH ALLEN KITS FOR BIG TWIN CONTINUED ON NEXT PAGE

PART


40-22 1970/1984 Big Twin Cam cover. Allen head screws.

40-23 1987/1992 FXR & FLT Cam, primary and transmission side covers. Allen head screws.

40-24 1936/1969 Big Twin Cam cover set. Button head screws.

40-25 1987/1992 Big Twin Cam cover. Allen head screws.

40-586 1999 / 2001 TC 88 Cam cover. Smooth allen head screws.

40-590 1999 / 2001 TC 88 Cam cover sensor kit. Button Torx head screws.

40-26 1989/1993 FXST & FLST Cam, primary and transmission cover set. Allen head screws.

40-27 1973/1985 Big Twin Chain sprocket to hub mount with cast rear wheel. Allen head screws

40-28 1973/1985 Big Twin Chain sprocket to hub mount with spoke rear wheel. Allen head screws.

40-588 1999 / 2001 TC 88 Clutch cover. Button Torx head screws.

40-29 1936/1984 Big Twin Cylinder base set. Acorn nut style.

40-30 1936/1964 Big Twin Derby and chain inspection cover. Flat head screws.

40-31 1977/1983 FX Disc brake caliper mount for front dual disc. Allen head screws.

40-32 1973/1984 FX and FLH Disc brake rotor to hub. Rear. Spoke wheel. Button head screws.with locknuts

40-33 1981/1992 FX & FXR Disc brake rotor to hub. Rear. Spoke wheel. Flat head screws.1984/1992 FXST &FLST

40-34 1974/1978 FX Disc brake rotor to hub. Front single. Spoke wheel. Flat head screws.

40-35 1978/1992 Big Twin Disc brake rotor to hub. Rear. Cast wheel. Flat head screws.

40-36 1984/1992 FXST & FXWG Disc brake rotor to hub. Front single. Spoke wheel. Button head screws.

40-38 1982/1985 FLT Disc brake rotor to hub. Rear. Cast wheel. Flat head screws.1980 & 1981 FLT (Right side front)

40-39 1977/1983 FX Disc brake rotor to hub. Dual front. Cast wheel. Flat head screws.1982 & 1983 FXR

40-40 1977/1983 FX Disc brake rotor to hub. Dual front. Spoke wheel. Flat head screws.1982 & 1983 FXR

40-591 All models FXST Fender rail kit. Allen head screws, flat washers.

40-592 1990 & Later FXST & FLST Gas tank mount kit. Allen head screws.

40-42 1958/1969 Big Twin Generator and cam cover mounting kit. Allen head screws.

40-43 Pullback and FXWG Handlebar top clamp allen screws. OEM 3488. Screw length: 7⁄8”.risers

40-44 1982/1992 All Models Handlebar lever mount and master cylinder cover. Button head screws.

40-45 1973/1981 All Models Handlebar lever mount and master cylinder cover. Allen head screws.

40-46 1974/1981 Big Twin Handlebar clamp mount. Allen head screws.

40-47 1948/1977 Big Twin Head bolt set. Acorn nut and stud.

40-48 All Super Glides® Head light bracket mount. Allen head screws.

40-49 All Shovels Header exhaust mount. Allen head screws.

40-50 1970/1985 4 speed Big Twin Inner primary to motor case. Allen head screws.

40-595 1999 / 2001 TC Softail® & Dyna® Inspection cover kit. Button Torx head screws.

40-594 1990 & Later Big Twin Intake manifold kit. Allen head screws.

40-51 1976 & Earlier All H-D® models Kicker arm set. Upper and lower. Allen head screws.

40-52 All models License plate mounting kit. Acorn nut style.

40-53 All models License plate bracket to fender mount. Allen head screws and large washers.

40-54 All Models License plate mounting kit. Button head screws.

40-55 L. 1976/1992 Big Twin Lifter base bolt set. Allen head screws.

40-56 1936/E. 1976 Big Twin Lifter base bolt set. Oval head screws.

40-57 L.1976/1992 Big Twin Lifter base set. Acorn nut and stud.

40-596 1999 / 2001 TC 88 Lifter base bolt set. Smooth allen head screws.

40-58 1936/E. 1976 Big Twin Lifter base set. Acorn nut and stud.

40-59 1984 FXST Motor mount hardware. Allen head screws.1985 FX

40-60 1970/1980 Big Twin Oil screen pump plug. Allen head style with O-ring.

SMOOTH ALLEN KITS FOR BIG TWIN DETAIL OF KNURLEDAND SMOOTH ALLENS

14

14/414

SMOOTH ALLEN KITS FOR BIG TWIN CONTINUED

Knurls have been removed by centerless grinding process. This ensures head purchase contact area is not compromised. NOTE: If the kits do notcontain allen heads or if they are hidden in the application they will not be smooth.

PART


40-61 1981/1996 Big Twin Oil pump plug. Allen head style with O-ring. 1 Each.

40-62 1966/1969 Big Twin Oil screen plug. Allen head style with O- ring.

40-63 1941/1980 Big Twin Oil check valve plug. Allen head style.

40-64 1968/1980 Big Twin Oil relief valve plug. Allen head style.

40-68 All Pans Pan cover set for both sides. For use with D-ring. Allen head screws.

40-69 1979/1992 Big Twin Point cover set. Button head screws with socket wrench.

40-70 1970/1978 Big Twin Point cover set. Button head screws with socket wrench.

40-71 1985/1992 5 spd. Big Primary cover with chain and clutch inspection cover set. Allen head screws.Twin except FXST

40-72 1965/1969 Big Twin Primary cover set. Flat head screws.

40-73 1980/1984 All 5 speeds Primary cover set. Allen head screws.

40-74 1936/1964 Big Twin Primary cover set. Allen head screws.

40-75 1965/1985 4 spd. Big Twin Primary, derby and inspection covers. Allen head screws.

40-76 1973/1984 Big Twin Rear brake arm support bracket mount. Hex head with slotted nuts, cotter pins and washers.

40-77 1984 & Earlier FX with sissy bar Rear fender rail set. Allen head screws.

40-78 1971/1985 Shovel Rocker arm shaft end plugs. Allen head screws.

40-79 1966/1970 Shovel Rocker arm shaft end plugs. Allen head screws.

40-80 1984/1991 Evolution® V2 motors Rocker box set. Allen head screws.

40-81 1966/1984 Big Twin Rocker box nut set. Acorn nut style.

40-598 1999 / 2001 TC 88 Rocker box bolt kit. Smooth allen head.

40-85 1970/1986 All 4 speed FLH & FX Side cover set for cam, primary, chain and clutch inspection covers. Allen head screws.

40-86 1980/1984 FLT Tour Glide® Side cover set for cam, primary, transmission, chain and clutch inspection covers. Allen1982/1984 FXR, FXRS & FXRT head screws.

40-89 All Models Timing/oil plug. Acorn and stud.

40-90 All Models Timing plug. Button head style.

40-92 1936/1986 Big Twin Transmission side cover set. Acorn nut style.

40-93 1964/1978 4 spd. Big Twin Transmission top cover set. Flat head screws with special thread.

40-94 1987/1992 Big Twin Transmission end cover. Allen head screws.

40-95 1986 & Earlier 4 spd. Big Twin Transmission side cover set. Removal of studs required. Allen head screws.

40-96 1979/1986 4 spd. Big Twin Transmission top cover set. Allen head screws.

40-600 1998 FLHR & FLTR Transmission side cover set. Allen head screws.

40-599 1998 FLHR & FLTR Transmission top cover set. Allen head screws.

40-602 1999 / 2001 TC 88 Dyna® Transmission side cover set. Smooth allen head screws.

40-601 1999 / 2001 TC 88 Dyna® Transmission top cover set. Smooth allen head screws.

40-97 All FX except Triple tree pinch bolt Set. Allen head screws.39mm tubes

40-98 FX & FXR with Triple tree set. Replaces 4 side screws. Button head screws.39mm Tubes

40-99 1987 FXRS-SP & FXLR Triple tree pinch bolts, Upper and lower. (39mm tubes)1988/1990 All FXR models

40-100 1974/1981 All Models Twist grip mount set. Allen head screws.

14/5

Knurls have been removed by centerless grinding process. This ensures head purchase contact area isnot compromised. NOTE: If the kits do not contain allen heads or if they are hidden in the

application they will not be smooth.

SMOOTH ALLEN KITS FOR SPORTSTER®DETAIL OF KNURLEDAND SMOOTH ALLENS

PART


40-102 1957/1969 XLCH Cam and primary side covers. Allen head screws.

40-103 1971/1985 XL Cam cover set. Allen head screws with special washer.

40-104 1986/1990 XL Cam cover set. Allen head screws.

40-105 1991/1993 XL Cam cover set. Allen head screws.

40-587 1991 & Later XL Cam & sprocket cover set. Allen head screws.

40-106 All XL models Chain guard to swing arm. Button head screws.

40-107 1979/1991 XL Chain sprocket to hub mount with cast rear wheel. Allen head screws.

40-108 1991/1993 XL Crankcase, right side. Allen head screws.

40-109 1957/1985 XL Cylinder base nut set. Acorn nut style.

40-110 1957/1985 XL Cylinder base nut set. Hex nut style.

40-31 1977/1983 XL Disc brake caliper mount for front dual disc. Allen head screws.

40-34 1974/1978 XL Disc brake rotor to hub. Front single. Spoke wheel. Flat head screws.

40-111 1979/1991 XLS Disc brake rotor to hub. Rear. Spoke or cast wheel. Flat head screws.

40-40 1977/1983 XL Disc brake to rotor hub. Dual front. Spoke wheel. Flat head screws.

40-39 1977/1983 XL Disc brake rotor to hub. Dual. Cast wheel Flat head screws.

40-593 1986 & Later XL Gas tank mount kit. Allen head screws.

40-112 1971/E. 1984 XL Generator mount. Allen head screws.

40-44 1982/1991 All Models Handlebar lever mount and master cylinder cover. Button head screws.

40-45 1973/1981 All Models Handlebar lever mount and master cylinder cover. Allen head screws.

40-46 1974/1980 XL Handlebar clamp mount. Allen head screws.

40-48 1957/1991 Headlight bracket mount. Allen head screws.

40-51 1976 & Earlier All Models Kicker arm set. Upper and lower. Allen head screws.

40-52 All Models License plate mounting kit. Acorn nut style.

40-53 All Models License plate bracket to fender. Allen head screws with large washers.

40-54 All Models License plate mounting kit. Button head screws.

40-114 1991/1993 XL Motor mount. Lower front. Allen head screws.

40-115 1991/1993 XL Motor mount. Front upper & top center. Allen head screws.

40-69 1979/1992 Sportster® Point cover set. Button head screws with socket wrench

40-70 1970/1978 Sportster® Point cover set. Button head screws with socket wrench.

40-123 1991/1993 XL Primary, inspection, crankcase covers & shifter. Allen head screws.

40-78 1971/1985 Sportster® Rocker arm shaft end plugs. Allen head screws.

40-79 1957/1970 Sportster® Rocker arm shaft end plugs. Allen head screws.

40-116 1957/1970 XL Rocker arm shaft end plug with stud.

40-117 1957/1976 XL Rocker box bolt set. Acorn nut and stud.

40-80 1984/1991 Evolution® Rocker box set. Allen head screws.V2 models

40-119 1971/1976 XL Rocker box set. Allen head screws.

40-120 1977/1985 Ironhead Rocker box set. Allen head screws.Sportster®

40-118 1991/1993 XL Rocker box. Allen head screws.

40-122 1986/1990 XL Side cover set. Allen head screws for cam, primary and oil fill check screw.

40-124 1977/1985 XL Side cover set. Allen head screws for cam, primary, sprocket cover & oil fill check screw.

40-125 1971/1976 Sportster® Side cover set. Allen head screws for cam, primary and oil fill check screw.

40-126 1991/1993 XL Sprocket cover and rear master cylinder mount. Allen head screws.

40-89 All Models Timing/oil plug. Acorn nut and stud.

40-90 All Models Timing plug. Button head style.

40-97 All XL except Triple tree pinch bolts. Allen head screws.39mm tubes

40-98 All XL except Triple tree set. Replaces 4 side screws. Button head screws.39mm tubes

40-99 1988/1990 All XL models Triple tree pinch bolts, upper and lower (39mm tubes).

40-100 1974/1981 All models Twist grip mount. Allen head screws.

14

14/614

Assortment trays of chrome plated allen head screws. 1⁄4, 5⁄16 & 3⁄8.24 Sizes; 215 pieces. Grade 8.40-197 Assortment tray. Coarse thread. SOLD EACH

40-222 Assortment tray. Fine thread.

Assortment trays of chrome plated allen head screws. 8 - 32, 10 - 24, 10- 32. 18 Sizes; 180 pieces. Grade 8.40-247 Assortment tray. SOLD EACH

REFILL POLYBAGSSOLD AS BAG OF 10.

40-248 8 - 32 x 1⁄2.40-249 8 - 32 x 7⁄8.40-250 10 - 24 x 3⁄8.40-251 10 - 24 x 1⁄2.40-252 10 - 24 x 5⁄8.40-253 10 - 24 x 3⁄4.40-254 10 - 24 x 1.40-255 10 - 24 x 1-1⁄4.40-256 10 - 24 x 1-1⁄2.40-257 10 - 24 x 1-3⁄4.40-258 10 - 24 x 2.40-259 10 - 32 x 1⁄2.40-260 10 - 32 x 5⁄8.40-261 10 - 32 x 3⁄4.40-262 10 - 32 x 7⁄8.40-263 10 - 32 x 1.40-264 10 - 32 x 1-1⁄4.40-265 10 - 32 x 1-1⁄2.

C. SMOOTH ALLEN HEAD SCREWS

A. SHOW CHROME ACORN NUTSAssortment tray of show chrome acorn nuts. 10 - 24 thru 1⁄2 - 20. 12Sizes; 110 pieces.

40-134 Assortment tray. SOLD EACH

REFILL POLYBAGSSold as 10 piece bag or 5 piece bag.

40-135 10-24. BAG OF 10

40-136 10-32. BAG OF 10

40-137 1⁄4-20. BAG OF 10

40-138 1⁄4-28. BAG OF 10

40-139 5⁄16-18. BAG OF 10

40-140 5⁄16-24. BAG OF 10

Assortment tray of chrome plated button head screws. #8 - 3⁄8 UNC &UNF. 24 Sizes; 240 pieces. Grade 8.


REFILL POLYBAGS SOLD AS BAG OF 10

40-292 8 - 32 x 1⁄2.40-293 8 - 32 x 5⁄8.40-294 8 - 32 x 3⁄4.40-295 10 - 24 x 1⁄2.40-296 10 - 32 x 1⁄2.40-297 10 - 32 x 3⁄4.40-298 10 - 32 x 1.40-299 1⁄4 - 20 x 5⁄8.40-300 1⁄4 - 20 x 3⁄4.40-301 1⁄4 - 20 x 7⁄8.40-302 1⁄4 - 20 x 1.40-303 1⁄4 - 28 x 1⁄2.

B. BUTTON HEAD SCREWS

40-304 1⁄4 - 28 x 3⁄4.40-305 1⁄4 - 28 x 1.40-306 5⁄16 - 18 x 1⁄2.40-307 5⁄16 - 18 x 3⁄4.40-308 5⁄16 - 18 x 1.40-309 5⁄16 - 24 x 3⁄8.40-310 5⁄16 - 24 x 1⁄2.40-311 5⁄16 - 24 x 1.40-312 3⁄8 - 16 x 3⁄4.40-313 3⁄8 - 16 x 1.40-314 3⁄8 - 24 x 3⁄4.40-315 3⁄8 - 24 x 1.

A

B

40-141 3⁄8-16. BAG OF 10

40-142 3⁄8-24. BAG OF 10

40-143 7⁄16-14. BAG OF 10

40-144 7⁄16-20. BAG OF 10

40-145 1⁄2-13. BAG OF 5

40-146 1⁄2-20. BAG OF 5

C

SOLD AS BAG OF 10.COARSE FINEPART NO. SIZE PART NO.

40-198 1⁄4 x 5⁄8 40-22340-199 1⁄4 x 3⁄4 40-22440-200 1⁄4 x 7⁄8 40-22540-201 1⁄4 x 1 40-22640-202 1⁄4 x 1-1⁄4 40-22740-203 1⁄4 x 1-1⁄2 40-22840-204 1⁄4 x 1-3⁄4 40-22940-205 1⁄4 x 2 40-23040-206 1⁄4 x 2-1⁄4 40-23140-207 5⁄16 x 5⁄8 40-23240-208 5⁄16 x 3⁄4 40-23340-209 5⁄16 x 7⁄8 40-234

SOLD AS BAG OF 10.COARSE FINEPART NO. SIZE PART NO.

40-210 5⁄16 x 1 40-23540-211 5⁄16 x 1-1⁄4 40-23640-212 5⁄16 x 1-1⁄2 40-23740-213 5⁄16 x 1-3⁄4 40-23840-214 5⁄16 x 2 40-23940-215 5⁄16 x 2-1⁄4 40-24040-216 3⁄8 x 3⁄4 40-24140-217 3⁄8 x 1 40-24240-218 3⁄8 x 1-1⁄4 40-24340-219 3⁄8 x 1-1⁄2 40-24440-220 3⁄8 x 1-3⁄4 40-24540-221 3⁄8 x 2 40-246

14/714

PART NO SIZE DESCRIPTION OEM NO.

24-101 7/16” Aluminum banjo bolt washer.24-102 1/2” Brass oil pump plug.24-103 1/2” Nylon drain plug washer.24-104 1/2” Stainless steel oil tank drain plug washer.24-105 5/8” Nylon drain plug washer.24-106 Nylon oil filler plug for Big Twin 4 speed. 37091-8024-107 3/8” Brass banjo bolt, early. 637724-108 3/8” Nylon washer.24-109 3/8” Neoprene & stainless steel fender washer.24-110 3/8” Aluminum banjo bolt, late.24-111 7/16” Nylon washer.24-112 7/16” Stainless steel rocker shaft washers. 646624-113 1/4” Brass washer for oil screen & pump.78-443 1/4” Copper V2 rocker box cover washer. 611424-115 1/4” Neoprene & stainless steel seat mount washer.24-116 8mm Brass fork drain screw washer. 45406-7524-117 5/16” Nylon washer.24-119 5/16” Neoprene & stainless steel fender washer. 609524-120 4mm Brass fork drain screw washer. 45986-7324-121 #8 Nylon oil pump washer.24-122 #10 Nylon washer. 605324-123 #10 neoprene & stainless steel washer.95-761 1/4” Nylon side cover washer. 31433-8424-1 1/4” Nylon seat mount washer. 6410

SOLD AS BAG OF 10

A. GARDNER-WESTCOTTSPECIALITY WASHER KIT FOR H-D®

This specialty washer kit from Gardner-Westcott has many appli-cations that will save your customers and service department alot of time searching for that special application washer.Consisting of 24 different parts totaling 590 pieces ranging fromcopper washers, stainless steel washers with neoprene seal,nylon washers for various drain and filler plug applications andmany more.24-100 Speciality washer kit for H-D® applications. SOLD EACH

A

B. SHOW CHROME PLUGS FOR ALLENSAssortment tray of show chrome plugs for allen head screws. The kitconsists of 100 pieces each for 1⁄4, 5⁄16 and 3⁄8. The kit also comes with3 sample bolts with a hole plug applied for demonstration purposes.100% metal, made in the U.S.A. Note: Plugs also fit corresponding met-ric bolts.


REFILL POLYBAGSSOLD AS 50 PIECE BAG OR 10 PIECE BLISTER PACK.

10 PIECE50 PIECE BAG PACKPART NO. SIZE PART NO.

40-128 1⁄4 40-13140-129 5⁄16 40-13240-130 3⁄8 40-133

B

14/814

Assortment tray of chrome plated SAE flat and lock washers, and hexnuts in UNC & UNF threads. 1200 Pieces.40-266 Assortment tray. SOLD EACH

REFILL POLYBAGSSOLD AS BAG OF 100.40-267 1⁄4 - 28 Hex nut. 40-273 1⁄4 Lockwasher.40-268 5⁄16 - 24 Hex nut. 40-274 5⁄16 Lockwasher.40-269 3⁄8 - 24 Hex nut. 40-275 3⁄8 Lockwasher.40-270 1⁄4 - 20 Hex nut. 40-276 1⁄4 Flat washer.40-271 5⁄16 - 18 Hex nut. 40-277 5⁄16 Flat washer.40-272 3⁄8 - 16 Hex nut. 40-278 3⁄8 Flat washer.

A. HEX NUTS, LOCK & FLAT WASHERS

C. HEX HEAD CAP SCREWSAssortment trays of show chrome hex head cap screws. 1⁄4,5⁄16 & 3⁄8. 24 Sizes; 215 pieces. Grade 5.40-147 Assortment tray. Coarse thread. SOLD EACH

40-172 Assortment tray. Fine thread.

REFILL POLYBAGSSOLD AS BAG OF 10.COARSE FINEPART NO. SIZE PART NO.40-148 1⁄4 x 5⁄8 40-17340-149 3⁄4 x 5⁄8 40-17440-150 1⁄4 x 7⁄8 40-17540-151 1⁄4 x 1 40-17640-152 1⁄4 x 1-1⁄4 40-17740-153 1⁄4 x 1-1⁄2 40-17840-154 1⁄4 x 1-3⁄4 40-17940-155 1⁄4 x 2 40-18040-156 1⁄4 x 2-1⁄4 40-18140-157 5⁄16 x 5⁄8 40-18240-158 5⁄16 x 3⁄4 40-18340-159 5⁄16 x 7⁄8 40-18440-160 5⁄16 x 1 40-18540-161 5⁄16 x 1-1⁄4 40-18640-162 5⁄16 x 1-1⁄2 40-18740-163 5⁄16 x 1-3⁄4 40-18840-164 5⁄16 x 2 40-18940-165 5⁄16 x 2-1⁄4 40-19040-166 3⁄8 x 3⁄4 40-19140-167 3⁄8 x 1 40-19240-168 3⁄8 x 1-1⁄4 40-19340-169 3⁄8 x 1-1⁄2 40-19440-170 3⁄8 x 1-3⁄4 40-19540-171 3⁄8 x 2 40-196

A

C

Assortment tray of chrome plated nylon insert hex nuts. UNC & UNF. 11Sizes; 105 pieces.


REFILL POLYBAGSSOLD AS BAG OF 10 OR BAG OF 5.

40-280 10 - 24. BAG OF 1040-281 10 - 32. BAG OF 1040-282 1⁄4 - 20. BAG OF 1040-283 1⁄4 - 28. BAG OF 1040-284 5⁄16 - 18. BAG OF 1040-285 5⁄16 - 24. BAG OF 10

B. NYLON INSERT HEX NUTS

B

40-286 3⁄8 - 16. BAG OF 1040-287 3⁄8 - 24. BAG OF 1040-288 7⁄16 - 14. BAG OF 1040-289 7⁄16 - 20. BAG OF 1040-290 5⁄8 - 18. BAG OF 5

14/914

A. CHROME FLAT HEAD BOLTS

REFILL BAGSSOLD AS BAG OF 10.

FINESIZE PART NO.1⁄4 x 5⁄8 40-7721⁄4 x 3/4 40-7731⁄4 x 7⁄8 40-7741⁄4 x 1 40-7751⁄4 x 1-1⁄4 40-7761⁄4 x 1-1⁄2 40-7771⁄4 x 2 40-7781⁄4 x 2-1⁄4 40-7795⁄16 x 5⁄8 40-7805⁄16 x 1-3⁄4 40-7853⁄8 x 1-1⁄2 40-7903⁄8 x 1-3⁄4 40-7913⁄8 x 2 40-792

REFILL POLYBAGSSOLD AS BAG OF 10.40-769 10 - 24 x 5/840-770 10 - 24 x 3/440-793 10 - 32 x 1/240-794 10 - 32 x 5/840-795 10 - 32 x 3/4

B. CHROME SPACERSSOLD AS BAG OF 5.PART NO. SIZE40-801 1⁄4” I.D. x 1⁄8” long40-802 1⁄4” I.D. x 1⁄4” long40-803 1⁄4” I.D. x 3/8” long40-804 1⁄4” I.D. x 1⁄2” long40-805 1⁄4” I.D. x 3/4” long40-806 1⁄4” I.D. x 1” long40-807 5⁄16” I.D. x 1⁄8” long40-808 5⁄16” I.D. x 1⁄4” long40-809 5⁄16” I.D. x 3⁄8” long40-810 5⁄16” I.D. x 1⁄2” long40-811 5⁄16” I.D. x 3⁄4” long40-812 5⁄16” I.D. x 1” long40-813 3/8” I.D. x 1⁄8” long40-814 3/8” I.D. x 1⁄4” long40-815 3/8” I.D. x 3⁄8” long40-816 3/8” I.D. x 1⁄2” long40-817 3/8” I.D. x 3/4” long40-818 3/8” I.D. x 1” long

40-80440-812

40-815

ASSORTMENT TRAY REFILL PACKSU.S.A. MADE stainless steel. SOLD AS BAG OF 10.

C. CHROME HORSE® STAINLESS STEEL ALLEN HEAD SCREWS

B

COARSE FINEPART NO. SIZE PART NO.— 1⁄4 x 5⁄8 40-40140-378 1⁄4 x 3⁄4 40-402— 1⁄4 x 7⁄8 40-403— 1⁄4 x 1 40-404— 1⁄4 x 1-1⁄4 40-40540-382 1⁄4 x 1-1⁄2 40-406— 1⁄4 x 1-3⁄4 40-407— 1⁄4 x 2 40-408— 1⁄4 x 2-1⁄4 40-40940-386 5⁄16 x 5⁄8 40-410— 5⁄16 x 3⁄4 40-411— 5⁄16 x 7⁄8 40-412

COARSE FINEPART NO. SIZE PART NO.40-390 5⁄16 x 1-1⁄4 —— 5⁄16 x 1-3⁄4 40-416— 3⁄8 x 3⁄4 40-419— 3⁄8 x 1-3⁄4 40-423— 3⁄8 x 2 40-424

A

C

14/1014

U.S.A. MADE stainless steel assortment tray includes allen headscrews in 5⁄16-18. 12 Sizes, 120 pieces. Coarse thread.

ASSORTMENT TRAY REFILL PACKSSOLD AS BAG OF 10.40-425 5⁄16 -18 x 1⁄2.40-386 5⁄16 -18 x 5⁄8.

C. CHROME HORSE® STAINLESS STEEL ALLEN HEAD SCREWS

D. CHROME HORSE® STAINLESS STEEL HEX NUTS, LOCK AND FLAT WASHERS

U.S.A. MADE stainless steel assortment tray includes SAE flat and lockwashers, and hex nuts in UNC and UNF threads. 13 Sizes, 1205 pieces.

REFILL POLYBAGS40-429 1⁄4 - 28 Hex nut, UNF. PKG. OF 10040-428 1⁄4 - 20 Hex nut, UNC. PKG. OF 10040-430 5⁄16 - 18 Hex nut, UNC. PKG. OF 10040-433 3⁄8 - 24 Hex nut, UNF. PKG. OF 10040-432 3⁄8 - 16 Hex nut, UNC. PKG. OF 10040-434 7⁄16 - 20 Hex nut, UNF. PKG. OF 540-435 1⁄4 Lockwasher, SAE. PKG. OF 10040-437 3⁄8 Lockwasher, SAE. PKG. OF 100

U.S.A. MADE stainless steel assortment tray includes button headscrews and bolts in UNC and UNF threads. 22 Sizes, 220 pieces.

REFILL POLYBAGSSOLD AS BAG OF 10.40-453 8 - 32 x 5⁄8, UNC. 40-465 1⁄4 - 28 x 1, UNF.40-454 8 - 32 x 3⁄4, UNC. 40-466 5⁄16 - 18 x 1⁄2, UNC.40-457 10 - 32 x 3⁄4, UNF. 40-469 5⁄16 - 24 x 3⁄8, UNF.40-463 1⁄4 - 28 x 1⁄2, UNF.40-464 1⁄4 - 28 x 3⁄4, UNF.

B. CHROME HORSE® STAINLESS STEEL BUTTON HEAD SCREWS

ASSORTMENT TRAY REFILL PACKSSOLD AS BAG OF 10.

A. CHROME HORSE® STAINLESS STEEL HEX HEAD SCREWS

A

COARSE FINEPART NO. SIZE PART NO.40-329 1⁄4 x 5⁄8 40-35340-330 1⁄4 x 3⁄4 40-35440-331 1⁄4 x 7⁄8 40-355— 1⁄4 x 1 40-35640-333 1⁄4 x 1-1⁄4 40-357— 1⁄4 x 1-1⁄2 40-35840-335 1⁄4 x 1-3⁄4 40-35940-336 1⁄4 x 2 40-36040-337 1⁄4 x 2-1⁄4 40-36140-338 5⁄16 x 5⁄8 40-362— 5⁄16 x 3⁄4 40-36340-340 5⁄16 x 7⁄8 40-364

COARSE FINEPART NO. SIZE PART NO.40-341 5⁄16 x 1 40-36540-342 5⁄16 x 1-1⁄4 40-366— 5⁄16 x 1-1⁄2 40-36740-344 5⁄16 x 1-3⁄4 40-36840-345 5⁄16 x 2 40-369— 5⁄16 x 2-1⁄4 40-37040-347 3⁄8 x 3⁄4 40-371— 3⁄8 x 1 40-37240-349 3⁄8 x 1-1⁄4 40-37340-350 3⁄8 x 1-1⁄2 40-37440-351 3⁄8 x 1-3⁄4 40-37540-352 3⁄8 x 2 40-376

B

D

14/1114

B

C

U.S.A. MADE stainless steel assortment tray includes nyloninsert hex nuts in 11 sizes. 105 Pieces.

REFILL POLYBAGS

A. CHROME HORSE® STAINLESS STEELNYLON INSERT HEX NUTS

40-450 7⁄16 - 20, UNF. BAG OF 1040-451 5⁄8 - 20,UNF. BAG OF 5

A

B. CHROME PLATED FLATWASHERS

QTY.PER

PART NO. DIA. PKG.

41-540 1/4” 12

41-541 5/16” 12

41-542 3/8” 6

41-543 7/16” 6

SOLD AS KIT

C. COUNTERSUNK WASHERSQTY/PER

PART NO. DIA. PKG.

41-133 1/4” 8

41-134 5/16” 8

41-135 3/8” 5

SOLD AS KIT

D

D. SHOW BIKE KITS

ACORN APPLICATION CAP

— Knuckle 1936 thru 1939. 41-843

41-832 Shovel 1978 thru 1984. —

41-833 Shovel FLT 5 speed 1979 thru 1984. 41-851

41-834 Evolution® 4 speed 1984 thru 1986. 41-852

41-835 Evolution® 5 speed 1985 & 1986. —

SOLD AS KIT

Complete engine kits in either acorn or cap style. Order onepart number and get every thing you need in one package!

14/1214

41-885 Oil pump relief valve plug, 1968 thru 1980. OEM 26377-68. SOLD EACH

41-886 Tappet oil screen plug, 1970 thru 1980. OEM 657.41-887 Oil pump check valve plug, 1936 thru 1980. OEM 26362-36.41-888 Tappet oil screen, oil pump check valve, relief valve plug 1981 & later. OEM 26263-80.41-889 Tappet oil screen, 1952 thru 1965. OEM 24987-52.41-890 Tappet oil screen plug, 1966 thru 1969. OEM 655.

41-891 Complete set of 3 plugs: tappet oil screen, oil pump check valve, SOLD AS SET

and relief valve plug, 1970 thru 1980.41-892 Complete set of 3 plugs: tappet oil screen, oil pump check valve, and relief valve plug,

1981 & later. OEM 26263-80.

CUSTOM CHROME PLATED HEX HEADOIL PUMP PLUGS FOR BIG TWIN 1936 & LATER

CHROMEPLATED

B. CHROME PLATED ACORN NUTS & CAP NUTS

No mix-ups — display skin packaged with labeling of thread size& stock number.

QTY. PERACORN THREAD SIZE PKG. CAP

41-500 1⁄4-24 H-D® 5 41-520

41-501 1⁄4-28 SAE 5 41-521

41-502 5⁄16-24 SAE 4 41-522

41-503 3⁄8-24 SAE 3 41-523

41-504 7⁄16-20 SAE 2 41-524

41-505 1⁄2-20 SAE 1 41-525

41-506 9⁄16-18 SAE 1 41-526

41-507 5⁄8-18 SAE 1 41-527

41-508 1⁄4-20 UNC 5 41-528

41-509 5⁄16-18 UNC 4 41-529

41-510 3⁄8-16 UNC 3 41-530

41-511 7⁄16-14 UNC 2 41-531

41-512 1⁄2-13 UNC 1 41-532

41-513 9⁄16-12 UNC 1 41-533

41-514 5⁄8-11 UNC 1 41-534

A

A. COLONY PIKE NUTSQTY.PER

PART NO. DIA. PKG.

40-711 1/4”-24 H.D. 5

40-712 10-24 SAE 5

40-713 1/4”-28 SAE 5

40-714 5/16”-24 SAE 4

40-715 3/8”-24 SAE 3

40-716 7/16”-20 SAE 2

40-717 1/2”-20 SAE 1

40-718 9/16”-18 SAE 1

40-719 5/8”-18 SAE 1” 1

40-720 5/8”-18 SAE 1-1/4” 1

40-721 10-24 UNC 5

40-722 1/4”-20 UNC 5

40-723 5/16”-18 UNC 4

40-724 3/8”-16 UNC 3

40-725 7/16”-14 UNC 2

40-726 1/2”-13 UNC 1

40-727 9/16”-12 UNC 1

40-728 5/8”-11 UNC 1” 1

40-729 5/8”-11 UNC 1-1/4” 1

SOLD AS KIT

14/1314

Acorn style plug fits all models H-D® Big Twin & Sportster® timingplug holes and oil tanks with 5⁄8 - 18 drain holes.41-855 Acorn style; chrome plated. SOLD EACH

Acorn style plug with an oversize thread and one tap for rethreadingthe stripped out timing hole. Fits all H-D® timing holes.41-858 Oversize chrome plated acorn plug and tap. SOLD AS KIT

41-859 Oversize chrome plated acorn plug only SOLD EACH

Cap style plug fits all models H-D® Big Twin & Sportster® timing plugholes and oil tanks with 5⁄8 - 18 drain holes.41-856 Cap style; chrome plated. SOLD EACH

Quality reproduction of stock timing plug for FL & XL 1952 thru 1969.Replaces OEM 704.98-299 Reproduction style; chrome plated. SOLD EACH

Exact duplicate of OEM 2326-26. Fits timing plug on Big Twin 1936 thru1939 and Sportster® timing plug holes and oil tanks with 5⁄8 - 18 drainholes. Oil fill on 45” models 1940 & earlier.41-979 Functional, custom design style. SOLD EACH

Chrome plated duplicate of allen style plug used on all models H-D®1970 & later. Replaces OEM 720.98-490 Allen timing plug; chrome plated. SOLD EACH

41-855

41-858

41-859

41-856

ALL TIMING PLUGS CHROME

PLATED

B. DRAIN PLUGSDome head plug with an oversize thread and one tap for rethreadingthe stripped out drain hole. Fits OHV Big Twin 1965 & later andSportster® 1967 & later.41-980 Chrome plated plug & tap. SOLD AS KIT

41-981 Chrome plated plug only. SOLD EACH

Quality reproduction of drain plug and brass gasket used onSportster® transmission, motor case, oil tank, and Big Twin 1937 thru1986 transmission. 1/2 - 13 thread.41-982 Chrome plated plug. OEM 707. SOLD EACH

41-983 Cad plated plug. OEM 707.41-25 Washer only. OEM 62702-52.

Quality reproduction of OEM 453-11 or OEM 700. Fits Big Twin motorcase 1911 thru 1970 and oil pump body 1968 thru 1984.41-984 Chrome plated plug. SOLD EACH

This plug fits all H-D® oil tank drain holes with 5⁄8 - 18 hole. Alsotransmission oil fill on 45” models 1940 & earlier.41-979 Chrome plated plug. SOLD EACH

Plug with gasket fits all models H-D® Big Twin 1981 thru 1989 oil tankwith 1⁄2 - 20 thread.41-857 Chrome plated plug. SOLD EACH

98-299 41-979

41-980

41-982 &41-983

41-984

41-979 41-857

41-981

98-490

41-25

C. MAGNETIC DRAIN PLUGSMagnetic drain plugs have been proven to add to the life of yourengine and transmission by removing metal particles from the oil.Cheap insurance! Cad plated.41-162 Replaces OEM 707. 1/2 - 13 Drain plugs are. used on

1941 thru 1986 Big Twin 4 speed and 1954 thru 1976Sportster® engine case and stock oil tank. SOLD EACH

41-163 Replaces OEM 734. 1/8 - 27 NPT hex head. Used forvarious aftermarket oil tank drain plugs and 1987 thru1989 Big Twin inner primary.

41-164 Replaces OEM 722. 3/8 - 18 Plug used on FXR & FLT 5speed transmission.

41-165 Replaces OEM 60348-65A, B. 1/2 - 20 Plug is used on1979 & later XL engine, 1991 & later Dyna® & FLTtransmission drain plug, 1965 thru 1984 Big Twin innerprimary, and 1981 thru 1989 Big Twin OEM oil tank.

41-166 Replaces OEM 718. 1/4 - 18 Plug is used on 1980 thru1984 FXR & FLT outer primary covers.

41-167 Replaces OEM 739A. 1/8 - 27 NPT internal hex head. Usedon 1985 & later Big Twin outer primary and trap door.

41-162

41-163

41-164

41-165

41-166

41-167

A

B

C

A. TIMING PLUGS

14/1414

ACORN NUT KITS — CAP NUT KITSFOR KNUCKLE, PAN, SHOVEL, EVOLUTION® & TC88™ACORN APPLICATION CAP

41-545 Axle kit (rear) for Big Twins 1973 & later. —

41-546 Circuit breaker screw kit for Big Twins 1936 thru 1957. 41-661

41-547 Cylinder base nut kit for Big Twins 1936 thru 1977. —

41-548 Cylinder base nut kit for Shovel 1978 thru 1984. —

41-549 Dash mounting kit for FXS. —

41-905 Dash mounting kit for FXR 1986 & later (except FXRS 1988 & later). —

41-550 Fender rail mounting kit (rear) for FX 1971 thru 1986. —

41-551 Generator screw kit for Big Twins 1936 thru 1957. 41-666

41-552 Generator screw kit for Big Twins 1958 thru 1969. —

41-553 Handlebar clamp & gauge mount kit for FX 1983 & later. —

41-554 Handlebar clamp mount kit for FX 1974 & later. —

41-556 Headlight visor mounting bolt kit for FX & FXR, 1959 & later. 41-670

41-906 Head bolt covers for all Evolution® 1985 thru 1992. 41-908

41-557 Head bolt kit for Big Twins 1948 thru 1983. —

41-559 Head bolt kit for Knucklehead 1940 thru 1947. 41-673

41-560 Kickstand mounting kit for Big Twins 1936 & later. —

41-349 Knuckle nuts for Knucklehead 1936 thru 1947. —

41-561 Lifter base screw kit for O.H.V. Big Twins 1936 thru 1975. —

41-562 Lifter base screw kit for Big Twins 1976 & later. —

41-152 Lifter base hardware for Twin Cam 88™ 1999 & later. —

41-563 Late lifter bases to early case conversion kit. 41-676

41-564 Motor case stud & nut kit for Flathead 1936 thru 1939. —

41-565 Motor case stud & nut kit for Flathead 1940 thru 1948. —

41-566 Motor case stud & nut kit for Knucklehead 1936 thru 1939. —

41-567 Motor case stud & nut kit for Knucklehead 1940 thru 1947. —

41-570 Motor case stud & nut kit for Shovel 1970 thru 1978. —

41-571 Motor case stud & nut kit for Shovel & Evolution®, 1979 thru 1995. —

41-159 Motor case stud & nut kit for Twin Cam 88™ Dyna®, FLT & Softail —

41-572 Motor mount kit (lower) for Big Twins 1936 thru 1984. —

41-573 Motor mount kit (upper) for Big Twins 1936 thru 1984. —

41-574 Oil pump nut kit for Big Twins 1936 thru 1967. (Nuts only.) —

41-575 Oil pump screw kit for Big Twins 1968 thru 1977. —

41-576 Oil pump screw kit for Big Twins 1978 thru 1991. —

41-155 Oil hose cover screw kit for Twin Cam 88™ 1999 & later. —

41-577 Point cover screws for Shovel 1971 & later. —

41-578 Primary cover screw kit for use on stamped steel inner & outer for —Big Twins 1936 thru 1969.

41-579 Primary cover screw kit for Big Twins 1965 thru 1970, with 41-682cast aluminum cover.

41-580 Primary cover screw kit for Big Twin 4 speed 1971 & later. —

41-581 Primary cover screw kit for all Big Twin 5 speed 1980 thru 1984. 41-684

41-909 Primary cover screw kit for Big Twin 5 speed 1985 & later 41-915(except 1989 FXST.)

ACORN NUT KITS ANDCAP NUT KITS FOR

KNUCKLE, PAN,SHOVEL,

EVOLUTION® &TC88™ CONTINUED

ON NEXT PAGE

14/1514

ACORN NUT KITS — CAP NUT KITS FOR KNUCKLE, PAN, SHOVEL,EVOLUTION® & TC88™CONTINUED


41-914 Primary cover screw kit for Softail® 1989 & later, and 41-916

Dyna Glide® 1991 & later.

41-158 Primary cover hardware for Twin Cam 88™ FLT & Dyna®. —

41-582 Rocker arm cover screw kit for all Pan. —

41-583 Rocker box bolt kit for Knucklehead 1936 thru 1947. 41-686

41-584 Rocker box nut kit for Shovel 1966 thru 1984. —

41-153 Rocker box acorns for Twin Cam 88™ 1999 & later. —

41-585 Rocker shaft end plug kit for Shovel 1966 thru 1970. —

41-586 Rocker shaft end plug kit for Shovel 1971 thru 1984. —

41-587 Rocker shaft nut & washer kit for Shovel 1966 thru 1984. 41-418

41-588 Switch housing screw kit for Big Twins 1973 & later. 41-688

41-154 Cam cover acorns for Twin Cam 88™ 1999 & later. —

41-589 Timing cover screw kit for Big Twins 1936 thru 1970. 41-689

41-590 Timing cover screw kit for Big Twins 1971 & later. —

41-157 Point cover screws for Twin Cam 88™ 1999 & later. —

41-591 Transmission adjusting screw & mounting kit for Big Twins —1936 thru 1964.

41-592 Transmission filler cap/dipstick for FLT & 5 speed 1985 & 1986. —

41-593 Transmission mounting plate to frame kit for Big Twin 4 speed —1936 & later.

41-594 Transmission screw & nut kit for FLT 1980 thru 1985 and 5 speed. 41-691

41-595 Transmission side cover nut kit for Big Twin 1936 thru 1984 4 speed. 41-692

41-596 Transmission side cover nut kit for all Big Twin 4 speed 1936 thru —1984. Shovel & Evolution® 4 speed use on long studs.

41-911 Trans side cover screw kit for FL, FX & Softail®, 1987 & later, and —all Dyna® 1991 & later.

41-912 Transmission shifter cover screw kit for FL & FX, Evolution® 1987. 41-919

41-913 Transmission shifter cover screw kit for FL & FX, Evolution® —1988 & later.

41-156 Transmission shifter cover screws for FLT/ST.

41-597 Wheel hub cover screw kit for Big Twin 1936 thru 1966. 41-694

14/1614

ACORN NUT KITS — CAP NUT KITSFOR H-D® SPORTSTER®


41-598 Air cleaner screws for Sportster® & 74” pre-1978 with stock air cleaner. 41-700

41-545 Axle kit (rear) for Sportster® 1979 & later. —

41-599 Cam cover screw kit for Sportster® 1957 thru 1970. —

41-600 Cam cover screw kit for Sportster® 1971 thru 1985. 41-701

41-921 Cam cover screw kit for XL 883cc & 1100cc, 1986 & later. —

41-601 Clutch adjusting hole cap for Sportster® 1971 thru 1976. —

41-602 Clutch adjusting hole cap/filler cap for Sportster® 1977 thru 1984. —

41-603 Clutch adjusting hole cap/filler cap for XL (883cc, 1100cc & 1200cc), —1985 & later.

41-604 Cylinder base nut kit for Sportster® 1957 thru 1985. —

41-605 Cylinder base nut kit for XLR style Sportster® 1957 thru 1985. —

41-550 Fender rail mounting kit (rear) for Sportster® 1957 thru 1978 —

41-606 Generator screw kit for Sportster® 1957 thru 1970. —

41-607 Generator screw kit for Sportster® 1971 thru 1985. —

41-553 Handlebar clamp & gauge mount kit for Sportster® 1983 & later. —

41-554 Handlebar clamp mount kit for Sportster® 1974 & later. —

41-556 Headlight visor mounting bolt kit for Sportster® 1959 & later. 41-670

41-906 Head bolt covers for all Evolution® 1985 thru 1992. 41-908

41-608 Head bolt kit for Sportster® 1957 thru 1972. 41-704

41-609 Head bolt kit for Sportster® 1973 thru 1985. —

41-402 License plate mounting kit. 41-706

41-610 Lifter base screw kit for Sportster® 1957 thru 1985. —

41-923 Lifter base screw kit for XL 883cc & 1100cc, 1986 thru 1990. —

41-611 Motor mount kit for Sportster® 1957 thru 1985. —

41-612 Motor mount kit (extra length) for Sportster® 1957 thru 1985. —

41-924 Motor mount kit (lower) for XL 883cc & 1100cc, 1986 & later. —

41-925 Motor mount kit (upper) for XL 883cc & 1100cc, 1986 & later. —

41-926 Oil filter adapter screw kit for XL 883cc & 1100cc, 1986 thru 1990. —

41-577 Point cover screws for Sportster® 1971 & later. —

41-613 Primary cover filler cap/breather for Sportster® 1971 thru 1976. —

41-614 Primary cover screw kit (stamped steel cover) for Sportster® —1957 thru 1969.

41-615 Primary cover screw kit for XLH 1967 thru 1970 and XLCH 1970. —

41-616 Primary cover screw kit for Sportster® 1971 thru 1976. 41-708

41-617 Primary cover screw kit for Sportster® 1977 thru 1985. —

41-927 Primary cover screw kit for XL 883cc & 1100cc, 1986 thru 1990. —

41-618 Rocker box screw kit for Sportster® 1957 thru 1976. —

41-619 Rocker box screw kit for Sportster® 1977 thru 1985. —

— Rocker box screw kit for XL 883cc & 1100cc, 1986 & later. —

41-585 Rocker shaft end plug kit for Sportster® 1957 thru 1970. —

41-586 Rocker shaft end plug kit for Sportster® 1971 thru 1985. —

41-587 Rocker shaft nut & washer kit for Sportster® 1957 thru 1985. 41-418

41-620 Sprocket cover screw kit for Sportster® 1957 thru 1970. —

41-621 Sprocket cover screw kit for Sportster® 1971 thru 1976. 41-713

41-622 Sprocket cover screw & nut kit for Sportster® 1977 thru 1985. —

41-929 Sprocket cover/master cylinder mounting kit for XL 883cc & 1100cc, —1986 & later.

41-588 Switch housing screws for Sportster® 1973 thru 1981. 41-688

41-623 Tachometer drive block-off plug for Sportster® 1957 thru 1984. —

14/1714

CHROME ALLEN SCREW & NUT KITSFOR KNUCKLE, PAN, SHOVEL, EVOLUTION® & TC88™

CHROME ALLEN SCREW & NUT KITS FOR KNUCKLE, PAN, SHOVEL, EVOLUTION® & TC88™ CONTINUED ON NEXT PAGE

PART NO. APPLICATION

41-751 Disc brake rotor bolt & nut kit for FL (rear) 1973 thru 1980, and FL (front) 1973 & 1974, and FX 1973.

40-320 Thin hex head disc brake rotor bolt & nut kit for FL (rear) 1973 thru 1980,FL (front) 1973 & 1974, and FX 1973.

41-752 Disc brake rotor-to-hub screw kit for FX 1974 thru 1977.

41-753 Disc brake rotor-to-hub screw kit for FX 1978 thru 1982.

41-754 Disc front brake rotor-to-hub screw kit for FX, FXR & FLT, 1984 & later.

41-755 Disc rear brake rotor-to-hub screw & nut kit for FX, FXR & FLT, 1981 & 1982. Will only work with cast wheel.

41-756 Disc front brake rotor-to-hub screw & nut kit for FXST & FXWG, 1984 & later.

41-897 Disc front brake rotor to hub screw & nut kit for FXWG 1978 thru 1983.

41-898 Sprocket bolt & nut kit for FL, FX & XL, with chain drive and spoke rear wheel, 1973 & later

41-899 Sprocket bolt & washer kit for FL & FX, 1973 & later, XL 1973 thru 1991, with cast rear wheel, including belt drive.

41-900 Sprocket bolt & nut kit fits FXWG & FXRS, with belt drive & spoke rear wheel, 1985 & later.

41-901 Disc brake rotor to hub kit for front or rear cast wheel FLT 1982 thru 1985.

41-757 Fork bracket cover screw kit for FX 1971 & later.

41-758 Generator screws for OHV Big Twin 1936 thru 1957

41-759 Generator screws for Pan & Shovel, 1958 thru 1970.

41-760 Handlebar clamp screw kit for FX 1974 thru 1981.

41-761 Handlebar clamp screw kit for FX 1982 & later.

41-762 Handlebar lever mount screw kit for FX & FL, 1972 & earlier.

41-763 Handlebar lever mount & master cylinder cover screws for Big Twin 1973 thru 1981.

41-764 Handlebar lever mount & master cylinder cover screws for Big Twin 1982 thru 1995.

41-765 Head bolt kit for Pan & Shovel, 1948 & later.

41-766 Head bolt & washer 12 point big bore kit for Pan & Shovel, 1948 & later.

41-767 Lifter base screw kit for Big Twin 1936 thru 1976.

41-768 Lifter base screw kit for Big Twin 1976 & later.

41-769 Lifter base screw kit for 1975 & earlier case to late type lifter bases.

41-150 Motor mount (front) hardware for Dyna®, 1991 & later.

41-770 Oil pump mounting kit for OHV Big Twin 1936 thru 1967.

41-771 Oil pump mounting kit for Shovel 1968 thru 1977.

41-772 Oil pump mounting kit for Shovel & Evolution®, 1978 thru 1991.

41-132 Oil filter adapter mount kit for Big Twin, 1992 & later.

41-151 Oil filter adapter mount kit for Twin Cam 88™, 1999 & later.

41-773 Point cover screws for all H-D® 1970 thru 1978.


41-131 Point cover screws for Big Twin, 1993 & later.

41-775 Primary cover screw kit for Big Twin 1936 thru 1964.

41-776 Primary cover screw kit for Shovel & Evolution® 4 speed, 1971 & later.

41-777 Primary cover screw kit for Shovel & Evolution® 5 speed, 1980 thru 1984.

41-935 Primary cover screw kit for FXR & FLT 5 speed, 1985 & later.

41-936 Primary cover screw kit for Softail® 1989 & later and Dyna Glide® 1991 & later.

41-937 Rocker cover screw kit for FX & FL 1985 & later.

41-778 Rocker shaft end plug & cap nut kit for Shovel 1966 thru 1970 (end plug slotted).

41-779 Rocker shaft end plug & cap nut kit for Shovel 1971 & later.

41-780 Timing cover screw kit for Big Twin 1936 thru 1970.

41-781 Timing cover screw kit for Shovel & Evolution®, 1971 thru 1992.

41-131 Timing cover screw kit for Big Twin V2, 1993 & later.

98-490 Timing plug allen. Chrome plated duplicate replaces OEM 720.

41-149 Transmission-to-motor mounting hardware for Twin Cam 88™, 1999 & later.

41-782 Transmission side cover screw kit for Big Twin 4 speed, 1936 thru 1984.

41-938 Transmission side cover screw kit for FX & FL 5 speed, 1980 thru 1986.

41-939 Transmission side cover screw kit for FX & FL 1987 & later, Softail® and Dyna® 1991 & later.

14/1814


41-940 Transmission shifter cover screw kit for FX & FL 4 speed, 1980 thru 1986.

41-941 Transmission shifter cover screw kit for FX & FL 5 speed, 1987.

41-942 Transmission shifter cover & speedometer sensor screw kit for FX, FL, & Softail®, 1987 & later.

41-783 Transmission top cover screw kit for Big Twin 1936 thru 1964.

41-695 Transmission top cover screw kit for Big Twin 1936 thru 1964. Cad plated - stock.

41-784 Transmission top cover screw kit for Big Twin 1965 thru 1979.

41-160 Voltage regulator mount kit for FXST, 2000 & later.

CHROME ALLEN SCREW & NUT KITSFOR KNUCKLE, PAN, SHOVEL, EVOLUTION® & TC88™ CONTINUED

CHROME ALLEN SCREW & NUT KITS FOR SPORTSTER®


41-790 Brake cable adjuster (front) for Sportster® 1952 thru 1972.

41-791 Cam cover screw kit for Sportster® 1971 thru 1985.

41-751 Disc brake rotor bolt & nut kit for Sportster® (front) 1973.

41-752 Disc brake rotor-to-hub screw kit for Sportster® 1974 thru 1977.

41-753 Disc brake rotor-to-hub screw kit for Sportster® 1978 thru 1982.

41-792 Disc rear brake rotor-to-hub screw & nut kit for XL & FX, 1979 & later, and FL (spoke or cast) 1981 thru 1984.

41-754 Disc front brake rotor-to-hub screw kit for Sportster® 1984 & later.

41-757 Fork bracket cover screw kit for Sportster® 1952 & later.

41-793 Generator screws for Sportster® 1971 thru 1985.

41-760 Handlebar clamp screw kit for Sportster® 1974 thru 1981.

41-761 Handlebar clamp screw kit for Sportster® 1982 & later.

41-762 Handlebar lever mount screw kit for Sportster® 1972 & earlier.

41-763 Handlebar lever mount & master cylinder cover screws for Sportster® 1973 thru 1981.

41-764 Handlebar lever mount & master cylinder cover screws for Sportster® 1982 thru 1995.

41-794 Lifter base screw kit for Sportster® 1957 thru 1990.

41-795 Oil pump mounting kit for Sportster® 1954 thru 1976.

41-796 Oil pump mounting kit for Sportster® 1977 thru 1990.


41-774 Point cover screws for all H-D® 1979 & later.

41-797 Primary cover screw kit for Sportster® 1971 thru 1976.

41-798 Primary cover screw kit for Sportster® 1977 thru 1985.

41-799 Rocker box screw kit for Sportster® 1957 thru 1976.

41-800 Rocker box screw kit for Sportster® 1977 thru 1985.

41-937 Rocker cover screw kit for XL 1986 & later.

41-778 Rocker shaft end plug & cap nut kit for Sportster® 1957 thru 1970 (end plug slotted).

41-779 Rocker shaft end plug & cap nut kit for Sportster® 1971 thru 1984.

41-801 Sprocket cover screw kit for Sportster® 1971 thru 1976.


CHROMEPLATED


40-518 Fork bracket cover screw kit for FX 1971 & later.

CHROME HORSE®STAINLESS STEEL ALLEN SCREW & NUT KITS FOR PAN, SHOVEL & EVOLUTION®

ALL PARTS

STAINLESS

STEEL

CHROME HORSE®STAINLESS STEEL ALLEN SCREW & NUT KITS FOR SPORTSTER®



14/1914

B. COMPLETE CHROME STOCK HARDWAREKITS FOR H-D®


41-864 74” & 80” Side valve with cast iron heads, 1936 thru 1939.

Each kit contains chrome plated versions of all the stock engine nuts,bolts, washers & studs for your engine. Includes primary cover screws,lifter base screws, circuit breaker screws, case studs & nuts, timingplug, cam cover screws, cylinder base nuts & washers, oil pump nuts &bolts, transmission side cover nuts & washers, transmission top screws,transmission fill plug, generator screws, head bolts & washers. Allhardware meets or exceeds original Harley® specifications.

A. ROCKER ARM COVER NUT KITS FOR SHOVEL

Kit includes 18 hex nuts and 18 flat washers. For 1966 thru 1983.Replaces OEM 7753 and 6016.

40-318 Colony kit. Chrome plated. SOLD AS KIT

40-318

A

C. INDIVIDUAL CHROME STOCK HARDWAREKITS FOR H-D®

These kits are manufactured to the consistent high quality standardsthat everyone has come to expect from Colony. No compromise hasbeen made that would sacrifice their quality or authenticity. These kitsare perfect for restorations or for motor rebuilders who prefer the stockH-D® fasteners.


91-300 Lifter base screw kit for Big Twin, 1936 thru 1965.

41-870 Transmission top cover screw kit for Big Twin, 1936 & later.

91-301 Timing cover screw kit for Big Twin, 1936 thru 1970.

53-195 Generator screw kit for Big Twin, 1936 thru 1957.

53-194 Generator screw kit for Big Twin, 1958 thru 1970.

41-871 Primary cover screw kit for Big Twin, 1936 thru 1964.

33-118 Wheel hub star cover screws, 1965 & earlier.

53-240 Generator screws for H-D® 45”, 1937 thru 1957.

53-241 Generator screws for H-D® 45”, 1958 thru 1973.

C

D. REPLACEMENT MOTOR CASE NUT, BOLT & STUD KIT FOR H-D®

CHROMEPLATED

91-302 For Pan with thick D-ring. For both cylinders; 24 1⁄4” long bolts.SOLD AS KIT

41-412 For Sportster® rocker box cover, 1977 thru 1985. 14 Screws.

E. ROCKER BOX ALLEN SCREWS

CHROMEPLATED

These stock style chrome plated complete motor case kits contain allthe necessary hardware to bolt together the Harley® motor cases.Each kit is packaged for the specific application; there are no universal“fits all” kits. Colony knows that a rebuild job can be only as good asthe nuts & bolts that hold it together.


41-875 Flathead 1936 thru 1939.

41-876 Flathead 1940 thru 1948.

41-877 O.H V. Big Twins 1936 thru 1939.

41-879 Big Twins 1948 thru 1964.

41-880 Big Twins 1965 thru 1969.

41-881 Big Twins 1970 thru 1978.

41-882 Big Twins 1979 thru 1995.

41-142 Big Twins Evolution® 1996 & later.

D

E

B

14/2014

B. ACORN NUT SETSNeatly packaged acorn nuts available in many popularAmerican SAE & UNC sizes.

PART QTY. SOLDNO. SIZE PER CARD41-17 10 - 32 SAE 5 on card.41-16 10 - 24 UNC 5 on card.41-5 1⁄4 - 28 SAE 5 on card.41-8 1⁄4 - 20 UNC 5 on card.41-2 5⁄16 - 24 SAE 4 on card.41-1 5⁄16 - 18 UNC 4 on card.41-4 3⁄8 - 24 SAE 3 on card.41-3 3⁄8 - 16 UNC 3 on card.41-9 7⁄16 - 20 SAE 2 on card.41-12 7⁄16 - 14 UNC 2 on card.41-6 1⁄2 - 20 SAE 1 on card.41-13 1⁄2 - 13 UNC 1 on card.41-11 5⁄8 - 18 SAE 1 on card.

A. HANDLEBAR ALLEN SCREW KITS

ALLEN SCREW SETS FOR HARLEY-DAVIDSON® BY GARDNER - WESCOTT

CHROMEPLATED

Handlebar bolt kit (4 screws) to fasten riser top on 74” & Sportster®,all models 1974 thru 1981. 5⁄16 x 18.

41-413 Chrome plated kit. SOLD AS KIT

41-217 1981 & up XL & FX. SOLD AS KIT

41-414 Light control & switch screws for SOLD AS KIT

H-D® 74” & Sportster®, 1972 thru 1981.41-218 Handlebar Switch Boxes 1996 & up. SOLD AS KIT

C. LIFTER BASE ALLEN SCREW KIT FOR BIG TWIN

Lifter base screws. Oval head socket.

91-348 Chrome plated, for 1936 thru 1976. SOLD AS KIT

41-415 Chrome plated, for 1976-1/2 thru 1999. 8 PER PKG.

41-219 Chrome polished smooth 1999 & up Dyna and FLT 2000 & up Softail®.

41-220 Stainless Steel Polished 1999 & up Twin Cam

41-334

41-413

CHROMEPLATED

PRIMARY & CAM COVER SCREWS — BOTH SIDES41-404 Sportster® 1971-1976. SOLD AS SET

41-405 Sportster® 1977-1985.41-200 Sportster® 1986-1990.41-201 Sportster® 1991-2003.41-202 Sportster® 2004 & up.41-406 Big Twin 1970-1986.41-203 1987-1999 Softail®.41-204 1991-1998 Dyna®.41-205 1999 & up FLT.41-206 1999-2005 Dyna®.41-207 2000 & up Softail®.41-208 2006 & up Dyna®.

PRIMARY COVER SCREWS41-334 Sportster® 1971-1976. SOLD AS SET

41-416 Big Twin 1965-1969.41-333 Big Twin 1970-1985. 4 Speed.41-212 1989-1998 Softail® & 1999-1998 Dyna®.41-213 2000 & up Softail® & 1999-2005 Dyna®.41-214 1999 & up FLT.41-215 2006 & up Dyna®.

CAM COVER SCREWS41-332 Big Twin 1970 & later. SOLD AS SET

41-209 1987-1999 Softail®.41-210 1991-1998 FXR & Dyna®.41-211 1999 & up FLT, Dyna® & 2000 & up Softail®.41-335 Sportster® XLH & XLCH, 1971 & later.

POINT COVER SCREWS

41-407 Big Twin 1970 thru 1978. Sportster® XLH & XLCH,1971 thru 1978. Set includes gasket.SOLD AS SET

41-216 Timing Cover 1999 & up Twin Cams.

CARBURETOR ALLEN KITS41-419 Keihin carb on Big Twin 1976-1988 SOLD AS SET

and XL 1976-1987.41-946 Keihin carb on Big Twin 1990 & later and

XL 1988 & later.41-948 For S&S Super “B”.41-949 For S&S Two Throat.41-950 For S&S Super “E” and “G” Shorty.

A

B

C

14/2114

A. DIE CAST DOMED COVERS

B. TURBO-COVERSOur line of custom Turbo-Covers are chrome plated with black buttonhead allen screws. The screws are only functional where stock coversbolt up.

89-308 Derby cover for 1970 thru 1998. SOLD EACH

Replaces OEM 25414-70.89-310 Inspection cover without peg & shifter hole. Replaces

OEM 60572-78.89-309 Point cover for Big Twin & Sportster® 1970 thru 1998.

89-308

89-310

89-309

Beautifully chromed die cast aluminum covers give that classicchromed look. Use on 1999 & later Twin Cam 88™.

89-498 Derby cover. Replaces OEM 25415-99. SOLD EACH

89-497 Five hole ignition cover. Replaces OEM 32679-99.Includes five button head chrome allen screws& wrench. No gasket provided.

CHROMEPLATED

89-498

89-497

CHROMEPLATED

A

B

E

E. CUSTOM POINT & DERBY COVERS89-612 Maltese Point Cover, chrome die-cast. SOLD EACH

Fits 70’-98’ Big Twin & Sportster (2 hole).89-613 Maltese Point Cover, chrome die-cast.

Fits 99’-05’ Twin Cam 88 (5 hole).

89-612

89-613

F. FLAMED ACCESSORIESDie cast, with flamed design and chrome plating.

89-379 Points cover with horizontal screw holes. SOLD EACH

89-379

ALL PARTSCHROME PLATED

89-602 Point cover for Big Twin & Sportster® SOLD EACH

1970 thru 1998.89-601 Ignition cover with 5 holes, for Twin Cam 88® 1999 &

later. Replaces OEM 32679-99.89-603 Point cover with 2 vertical holes, for XL 1970 & later.89-604 Derby cover for Big Twin 1970 thru 1998. Replaces OEM

25414-70. Not shown.89-605 Derby cover for Twin Cam 88® 1999 & later. Replaces

OEM 25415-99. Not shown.

C. SKULL COVERS

89-602

89-605

C

F

D. ENGRAVED MALTESE CROSS COVERSU.S.A. MADE high quality chrome billet aluminum covers.

89-511 Point cover for Big Twin & Sportster® SOLD EACH

1970 thru 1998.89-510 Derby cover for Big Twin 1970 thru 1998.

Replaces OEM 25414-70.

CHROMEPLATED

89-51189-510

D

CHROMEPLATED

D. ACORN LICENSE PLATE MOUNTING HARDWARE

41-402 Hardware and rubber insulators fit all SOLD AS SET

slotted brackets on many makes & models.D

14/2214

CHROMEPLATED

89-272

39-38

39-39

CHROMEPLATED

82-18

82-4

Beautiful grips of billet aluminum with knurled ends for improved grip-ping surface. Dual cable throttle works with single or dual throttleassemblies while the left grip end caps unscrews to reveal storage forimportant small items such as registration papers. Fits 1973 thru 1995Harley® models without handlebar air valve. U.S.A. MADE.

35-88 Billet throttle grips for single or dual SOLD AS PAIR

cables. Ultra fine knurled texture in middle griparea.

Dash knobs of billet aluminum with knurled ends for improved grippingsurface. Fits Big Twin 1990 & later. U.S.A. MADE..57-81 Billet dash knob with grooved top. SOLD EACH

Attractive hub caps machined from billet aluminum then hand polishingand chrome plating them.89-272 Front hubcap for Dyna Wide Glide® SOLD EACH

1993 thru 1995, Softail® (except FLSTF)1984 thru 1995, and FXWG 4 speed 1984 thru 1986.

Billet aluminum choke knob cover. Knurled sides for more positive grip.Slips over existing knob and is held tight with a set screw. Fits all CVcarburetors — Big Twin 1990 & later and Sportster® 1988 & later.39-38 Plain choke knob cover. SOLD EACH

39-39 Grooved choke knob cover.

Beautiful seat knobs of billet aluminum with knurled edges..1/4 x 20 1/4 x 281996 & LATER APPLICATION 1995 & EARLIER

82-17 Seat knob with smooth top for 82-3aftermarket and OEM seats.

82-18 Seat knob with grooved top for —aftermarket and OEM seats.

82-19 Seat knob with smooth top and cover for 82-4LePera, Saddlemen and most OEM seats.

A. A/C BILLET ACCESSORIES

Alley Custom Motorcycle machines these billet aluminumaccessories to give a high tech look to various areas of themotorcycle. Satin finish except as noted.

57-81

35-88

B

Oil pressure gauge bracket fits Big Twin Evolution® 1984 & later.

21-321 Chrome plated mount. SOLD EACH

B. CHROME OIL PRESSURE GAUGEBRACKET

21-321

C

33-181

C. TIRE VALVE STEM COVERS33-179 Flared. Fits metal or rubber stems. SOLD EACH

33-181 Bullet shaped. Screws on metal stem.

CHROMEPLATED

33-179

A

14/2314

For use on H-D® 74”. Set contains two pieces (top & side) and coverhold down nuts. Hardware included. Easily installed.

88-42 Fits 1970 thru 1977. SOLD AS SET

88-47 Fits 1978 & later.

F. SIDE COVERS FOR FXR

89-242 Fits FXR & FXRS, 1982 & later. SOLD AS SET

OEM 66351-82 & 66356-82.

E. IGNITION MODULE COVER FOR SPORTSTER®Add a little chrome to an otherwise dark area.

89-320 For Sportsters® 1982 & later. SOLD EACH

Replaces OEM 66328-82T.

CHROMEPLATED

CHROMEPLATED

D. LEFT SIDE OIL TANK COVER FOR BIG TWIN

CHROMEPLATED

F

G

A

E

C. SIDE COVERS FOR 2004 XL89-535 Right side oil tank cover. Chrome. SOLD EACH

eplaces OEM 66262-04.89-536 Left side battery cover. Chrome.

Replaces OEM 66261-05.

A. CARRIAGE BOLT & NUTBolts and nuts.

24-118 5⁄16” -18 x 3⁄4” Long. SOLD AS PKG. OF 10

B. BUNGEE NUTSUse these nuts to avoid chrome, frame or paint damage while securingbungee cords. May also be used to replace shock absorber nuts on H-D® models. Chrome plated high grade carbon steel.

41-100 5⁄16 - 18 Bungee nuts. SOLD AS PAIR

41-101 3⁄8 - 24 Bungee nuts.41-102 3⁄8 - 16 Bungee nuts.

CHROMEPLATED

CHROMEPLATED

CHROMEPLATED

C

D

B

Covers the transmission below & behind the battery box. Includes holddown nuts. Complete with mounting hardware.

88-43 Fits Big Twin 1970 thru 1976. SOLD AS SET

88-46 Fits Big Twin 1978 & later.

G. RIGHT SIDE TRANSMISSION COVER FOR BIG TWIN

CHROMEPLATED

H

I. KROMETS

A decorative fastener which can be used anywhere on the bike.

41-284 Must buy package of twenty. SOLD AS PKG

CHROMEPLATED

H. “BIG DADDY” SKULLSSame fine detail and bright plating as our smaller skulls. 1-1⁄2” High, 1”wide. With 8mm stud & nut.

41-975 Chrome with Black eyes. SOLD EACH

CHECK QUANTITY DISCOUNT FOR BEST PRICE I

14/2414

A

BCHROMEPLATED

B. “ELECTRIC” KROMETS

“Electric” Kromets are great for license hold down bolts — givesextra light to rear of bike. They can be used any place you maynormally use the standard kromets. Easy mounting with hollowmount stud for wiring. 12V.

41-971 “Electric” kromet. Red. SOLD EACH

41-972 “Electric” kromet. Amber.41-973 “Electric” kromet. Blue.

A decorative fastener that can be used anywhere on the bike but isbest suited for license plate mounting. The finish and detail of the skullis top quality. Comes with removable stud, nut, lock and flat washer. 1”High, 5⁄8” wide. 1⁄4-20.

CHROME SKULLS41-960 Painted Black eyes. SOLD EACH

41-961 Purple jeweled eyes.41-962 Indigo Blue jeweled eyes.41-963 Crimson Red jeweled eyes.41-964 Emerald Green jeweled eyes.41-965 Golden jeweled eyes.GOLD SKULLS41-966 Painted Black eyes. SOLD EACH

CHECK QUANTITY DISCOUNT FOR BEST PRICE

A. SKULL KROMETS

4-COLOR DECALS

OUTFIT YOUR BUNKER

BUSTER WITH THIS

PRECISION GUIDED

DECAL

103-242 Full color American Eagle Decals; each 23” long x 5.25” tall. SOLD AS SET

LEFT AND RIGHT

Visit www.velocitystix.com

★★ Exclusive Original Eagle Design

★★ .2 Mil. High Grade ExteriorAutomotive Vinyl.

★★ Printed with 4-Color UVB resistantinks with Solar Clearfinish that extends decal’s durabilityeven further!

Guaranteed to make any axis ofevil tremble

Liberty Screams

with this blazing

eagle decal suitable

to dress out your

sheet metal or glass.

14/2514

NOTE 1: Shade-Shifter™ changes color from Purple to Blue to Green dependingon light source and viewing angle.

PART MOTORCYCLE VEHICLE TOTAL NUMBERNO. COLOR APPLICATION APPLICATION OF PIECES

103-214 Cobalt Blue Metalflake Tank Flame Set Extension Kit 16 medallions103-223 Fire Opal Metalflake Tank Flame Set Extension Kit 16 medallions103-222 Gold Metalflake Tank Flame Set Extension Kit 16 medallions103-211 Shade Shifter™ NOTE 1 Tank Flame Set Extension Kit 16 medallions

Tank Sets Consists of two sheets of flames approx. 12” x 16” packaged as an A Side & B side stacked together.

DESIGNATED USE OF EACH FLAME SET IS SUGGESTED ONLY! MIX AND MATCH COLOR SETS & SIZES,YOU DECIDE AND CUSTOMIZE!

LIQUID FLAMESFLAMED DECALS, INDIVIDUAL RAISED MEDALLIANS

103-211103-214


103-215 Cobalt Blue Metalflake Helmet Flame Set Detailing Kit 12 medallions103-227 Fire Opal Metalflake Helmet Flame Set Detailing Kit 12 medallions103-226 Gold Metalflake Helmet Flame Set Detailing Kit 12 medallions103-212 Shade Shifter™ NOTE 1 Helmet Flame Set Detailing Kit 12 medallions

TANK SETS

HELMET SETS

103-215 103-227103-226

LIQUID FLAMES™ HAVEBEEN USED BY TOP

CUSTOM BODY SHOPS

LIQUID FLAMES™ HAVE BEENCOMBINED AND INTEGRATED

INTO TOP AIRBRUSH PAINT JOBSFOR STUNNING

3-D EFFECTS THAT WIN SHOWSAND SATISFY CUSTOMERS.

NOTE 1: Shade-Shifter™ changes color from Purple to Blue to Green dependingon light source and viewing angle.

103-212

103-222 103-223

AS AN EXCELLENT COST SAVINGALTERNATIVE TO AIRBRUSH

PAINT JOBS

14/2614

Liquid Flames™

Vehicle sets can be used as a com-plete hood set OR a complete door panel sets. Alsosuitable for water craft! Consists of two sheets of

flames approx. 12” x 18” packaged as an A Side & Bside stacked together.

LIQUID FLAMESFLAMED DECALS, INDIVIDUAL RAISED MEDALLIANS


103-225 Fire Opal Metalflake Fender Flame Set Interior Kit 14 medallions103-224 Gold Metalflake Fender Flame Set Interior Kit 14 medallions

PART VEHICLE TOTAL NUMBERNO. COLOR APPLICATION OF PIECES

103-218 Silver Metalflake Hood or Door 18 medallions

103-229 Fire Opal Metalflake Hood or Door 18 medallions

103-228 Gold Metalflake Hood or Door 18 medallions

FENDER SETS

HOOD OR DOOR SETS

103-225 103-224

103-228103-229 103-218

DESIGNATED USE OF EACH FLAME SET IS SUGGESTED ONLY! MIX AND MATCH COLOR SETS & SIZES,YOU DECIDE AND CUSTOMIZE!

LIQUID FLAMES - CRUICIBLE SERIESFLAMED DECALS, INDIVIDUAL RAISED MEDALLIANS

CRUCIBLE SERIES™ TANK SETS

103-235 Fire Opal Metalflake.103-243 Black Metalflake.103-236 Yellow to Red Fade.103-237 Shade Shifter™.

CRUCIBLE SERIES™ MULTI-USE SETS

103-239 Fire Opal Metalflake.103-244 Black Metalflake.103-240 Yellow to Red Fade.103-241 Shade Shifter™.

103-235 103-243 103-236 103-237

103-239 103-244

103-240 103-241

Chrome / Dresser

Documents

Transcript of Chrome / Dresser