![NIRMASHUDH [ pancholi chirag ]](https://static.fdocuments.us/doc/165x107/577ce7b51a28abf10395a048/nirmashudh-pancholi-chirag-.jpg)
Chirag Resume
3
Chirag Patel Citizenship : Indian ▪ Date of birth : 20 December 1983 Pune Contact Mobile : +91-9422759379 E-mail : [email protected] Career Objective I want to become a successful professional to work in an innovative and competitive world which will help me to explore myself fully and realize my potential. Key Skills Proficient or familiar with software, concepts and technologies including: FEA: ABAQUS, HYPERMESH, ANSYS, LMS VL (Noise) MBD: MSC ADAMS Programming tool: MATLAB CAD: CATIA Work Experience July, 2012 to till present Employer HCL Technologies Ltd. – Pune (Client Location – John Deere) Company Profile HCL Technologies Ltd. is one of the largest service provider company worldwide. I am working with HCL Technologies since July, 2012 Designation Member Technical Staff Activity Worked on Random Vibration analysis (fatigue life estimation, ANSYS). Seismic analysis of structure (for ABB, ANSYS) Worked on Plastic parts for durability (John Deere) Work Experience 22 Months Employer Apollo Tyres Ltd. – Vadodara Company Profile Apollo Tyres Ltd. is one of the largest (in india, MNC) automotive industry engaged in design, development & manufacturing of tyres (car, bus, trucks, farm, OTR). I am working with Advanced Tyre Research department from September, 2010 to July, 2012 Designation Executive Engineer (NVH) Activity Global simulation procedure establishment for vibration and Noise simulation of tyre (Abaqus, Hyprmesh, LMS) Static and Dynamic Simulation of passenger vehicle tyres (Abaqus) Place: Pune Date: July 25, 2012 Chirag Patel
Transcript of Chirag Resume
Chirag Patel
Citizenship : Indian ▪ Date of birth : 20 December 1983Pune
ContactMobile : +91-9422759379E-mail : [email protected]
Career ObjectiveI want to become a successful professional to work in an innovative and competitive world which will help me to explore myself fully and realize my potential.
Key SkillsProficient or familiar with software, concepts and technologies including:
FEA:ABAQUS, HYPERMESH, ANSYS, LMS VL (Noise)
MBD:MSC ADAMS
Programming tool:MATLAB
CAD:CATIA
Work Experience July, 2012 to till present
Employer HCL Technologies Ltd. – Pune (Client Location – John Deere)
Company Profile
HCL Technologies Ltd. is one of the largest service provider company worldwide. I am working with HCL Technologies since July, 2012
Designation Member Technical StaffActivity Worked on Random Vibration analysis (fatigue life estimation, ANSYS).
Seismic analysis of structure (for ABB, ANSYS) Worked on Plastic parts for durability (John Deere)
Work Experience 22 Months
Employer Apollo Tyres Ltd. – Vadodara
Company Profile
Apollo Tyres Ltd. is one of the largest (in india, MNC) automotive industry engaged in design, development & manufacturing of tyres (car, bus, trucks, farm, OTR). I am working with Advanced Tyre Research department from September, 2010 to July, 2012
Designation Executive Engineer (NVH)Activity Global simulation procedure establishment for vibration and Noise simulation
of tyre (Abaqus, Hyprmesh, LMS) Static and Dynamic Simulation of passenger vehicle tyres (Abaqus) Responsible for tyre testing (Vibration Testing done at LMS Belgium and Noise
testing done at ARAI) Vibration related collaborative project with OEMs (Abaqus) Full Vehicle ride and handling simulation (ADAMS)
Work Experience 4 Months
Employer Charotar University of Science and Technology. – Changa.
College Profile
Charotar University of Science and Technology is running variety of technical and management courses. I worked with Mechanical Engineering department from June 2010 to September 2010
Designation Assistant Professor
Place: PuneDate: July 25, 2012 Chirag Patel
Work Experience 12 Months
Employer Charotar Institute of Technology. – Changa.
College Profile
Charotar Institute of Technology is running variety of technical and management courses. I worked with Mechanical Engineering department from June 2009 to May 2010
Designation Lecturer
Work Experience 11 Months
Employer Ingersoll-Rand India Ltd. – Naroda, Ahmedabad
Company Profile
Ingersoll-Rand (I) Ltd. is one of the largest (US Based MNC) engineering industry engaged in design, development & manufacturing of air-compressor. I worked with Design department from October, 2006 to September, 2007
Designation Project Engineer (Management Trainee)Activity Preparation and relies of BOM as per time line
Preparing iso-drawing of package designing Customer, Vendor and inter-department communication
InternshipWorked as M.E. project trainee at "Mahindra Navistar Automotive Ltd, Pune" as a part of M.E. Curriculum.Worked on project titled as "Modeling & Vibration analysis of Road Profile measuring system" from August 2008 to May 2009.
Education2007 to 2009 M.E. in Mechanical Engineering (CAD-CAM) with Dist. (74.22%)
Charotar institute of Technology, Changa, Gujarat University, Gujarat
2002 to 2006 B.E. in Mechanical Engineering with First-Dist. (67.30%)Sankalchand Patel Collage of Engineering, HNGU, Gujarat
Publications Paper presented at 2011 LMS india Automotive User Conference November 24 th and 25th Chennai,
“Use of AML Technique for Tyre Noise Prediction” from Apollo Tyres Ltd. Published paper Patel, C. B. (2010) “Modelling And Vibration Analysis Of A Road Profile
Measuring System”. International Journal of Automotive and Mechanical Engineering (IJAME), 1. pp. 13-28. ISSN ISSN: 1985-9325(Print); ISSN: 2180-1606 (Online)
Paper is under review in IJDE, Inderscience Publishers, ISSN No: 1751-5882, 2009, “Evaluation and Simulation of Semi Active Suspension System for Multi-Utility Cars by Modified Skyhook Control Theory Using Half Car Model”
Published paper in international Conference at SVNIT, Surat 2009 “Basic Design Consideration for Chassis Frame-Design Cycle and Modifications”
Place: PuneDate: July 25, 2012 Chirag Patel
