China EHID Ballast Brochure FINAL 1013

8/18/2019 China EHID Ballast Brochure FINAL 1013

http://slidepdf.com/reader/full/china-ehid-ballast-brochure-final-1013 1/16

ELECTRONIC HID BALLASTS

Commercial

Lighting

Industrial Lighting

Street Lighting

Horticultural Lighting

2-6

7-11

12-13

14-15



Definition:

Electronic ballasts for applications with low wattage Metal

Halide (MH) or Ceramic Metal Halide (CDM) lamps

Applications:

Business lighting, office lighting, residential lighting, stage

lighting, architectural lighting, decorative lighting, advertising

lighting, and more

Features and Benefits:

• More stable operation and faster warm-up time

• Fulham’s Electronic HID Ballasts extend lamp life up to 30%

• Fulham’s low wattage, low frequency Electronic HID

Ballasts compensate for input voltage fluctuations and

provide icker-free operation

• Lamp End-Of-Life (EOL) protection

• Improved thermal performance

COMMERCIAL LIGHTING BALLASTS 20, 39, 70, 150 WATT 230V for MH/CDM Lamps



1

CASE LENGTH CASE WIDTH HEIGHT MOUNTING LENGTH MOUNTING WIDTH MOUNTING HEIGHT WEIGHT

110mm (4.37") 75mm (2.95") 32mm (1.26") 97.5mm (3.84") 63.5mm (2.50") 27.5mm (1.08") 0.28kg (0.62lb)

CASE LENGTH CASE WIDTH HEIGHT MOUNTING LENGTH MOUNTING WIDTH MOUNTING HEIGHT WEIGHT

164mm (6.45") 91mm (3.58") 38mm (1.50") 154mm (6.06") 68.5mm (2.7") 29.5mm (1.16") 0.56kg (1.23lb)

Compliances and Approvals:

• ISO 9001

Performance Requirements:

Input Voltage: 220-240 V, 50/60Hz

Voltage Range: +/-10% of rated voltage

Total Harmonic Distortion (THD):

20W: <20%

39W, 70W, 150W: <15%

Operating Frequency (Typical): 175Hz

Crest Factor: <1.5

Protections:

• Lamp End-Of-Life (EOL) protection• Short circuit protection

• Open circuit protection

Installation and Application Notes:

• Ambient Temperature: -20°C through +55°C

• Ignition pulse is 3-4kV max

• Remote Mounting up to 1.5m

• Power to lamp must be cycled (on/off/on) after replacing lamp

• Ballast output will shut down after 30 minutes if lamp fails to ignite

COMMERCIAL LIGHTING BALLASTS20, 39, 70, 150 WATT 230V for MH/CDM Lamps

CATALOG NUMBERINPUT VOLTS

(V)

LINE CURRENT

(A)

INPUT POWER

(W)

MINIMUM

POWER FACTOR

TC MAX

(ºC)

CASE &

WIRING DIAGRAM

20 1 H1-230-20HSC 220-240 0.11 25 ≥ 0.90 80 1

39 1 H2-230-35HSC 220-240 0.20 44 ≥

0.95 80 1

70 1 H5-230-70HSC 220-240 0.35 78 ≥ 0.95 80 1

150 1 HXX-230-150-HBTCS 220-240 0.77 167 ≥ 0.95 80 2

LAMP DATA

WATTS NUMBER

(Please inquire about 50W and 100W models)

7 5

6 3 . 5

97.5

3 2

2 7 .

5

110

6.5

110

97.5

164

3 8

6 8 .

5

9 1

154

2 9 . 5

1 1 .

2 5

2



COMMERCIAL LIGHTING BALLASTS20, 39, 50 WATT 120V for MH/CDM Lamps

20, 39, 50, 70, 100, 150, 175 WATT 120-277V for MH/CDM Lamps

Definition:



Applications:Business lighting, office lighting, residential lighting, stage

lighting, architectural lighting, decorative lighting, advertising

lighting, and more









CATALOG

NUMBER

INPUT VOLTS

(V)

LINE CURRENT

(A)

INPUT POWER

(W)

MINIMUM

POWER FACTOR

CASE &

WIRING DIAGRAM

20 1 M156,C156,C175,M175 H1-120-22HSC 120 0.21 ≥ 0.98

39 1 M130,C179,C130

120 0.37 ≥ 0.98

50 1 M110,M1148 120 0.49 ≥ 0.98

LAMP DATA

WATTS NUMBER ANSI CODE

H3-120-39HSC

H4-120-50HSC

25

44

57

3

3

3

20 1 M156,C156,C175,M175 HXX-UNV-20-HBBCK 120-277 24 ≥ 0.90

39 1 M130,C179,C130 120-277 44 ≥ 0.90

50 1 M110,M1148 120-277 58 ≥ 0.90

70 1 C/M98,C/M139,C/M143 120-277 78 ≥ 0.90

100 1 M90,M140,M164 120-277 111 ≥ 0.95

150 1 M102,M142,M/C142,

M81/M107 120-277 164 ≥ 0.95

175 1 M57,M152,M137 120-277 195 ≥ 0.95

H3-UNV-39HSC

H3-UNV-39HBC

HXX-UNV-50-HBSCK

HXX-UNV-50-HBBCK

H5-UNV-70HSC

H5-UNV-70HBC

H7-UNV-150HSC

H6-UNV-100HSC

H7-UNV-150HBC

H6-UNV-100HBC

H8-UNV-175HSC

H8-UNV-175HBC

0.10A/277V

0.21A/120V

0.18A/277V

0.37A/120V

0.21A/277V

0.48A/120V

0.29A/277V

0.66A/120V

0.42A/277V

0.97A/120V

0.61A/277V

1.54A/120V

0.71A/277V

1.78A/120V

5

4

5

4

5

4

5

4

5

4

7

6

7

6





CASE LENGTH CASE WIDTH HEIGHT MOUNTING LENGTH MOUNTING WIDTH WEIGHT

140mm (5.51") 91.5mm (3.60") 38mm (1.50") 131mm (5.16") 73.5mm (2.89") 0.59kg (1.30lb)

4

123

131

7 3 . 5

9 1 . 5

38

50.5

16 white

black

green

red

blue

ACpower

1


95mm (3.74") 75mm (2.95") 30.5mm (1.20") 87mm (3.43") 65mm (2.56") 0.28kg (0.62lb)

3

white

black

green

redblue

ACpower

6 5

87

89

95

7 5

30.5


• cULus Listed (Outdoor Type 1)

• FCC Part 18, for Non-Consumer Equipment

• ISO 9001


Input Voltage: See chart on previous page for

120V and UNV 120-277 V, 50/60Hz models



20W: <25%

39W, 50W, 70W, 100W: <20%

150W, 175W: <15%


Crest Factor: <1.5

Protections:


• Short circuit protection


• Ignition failure protection

• Thermal protection, UNV 120-277V models only



• Ignition pulse is 3-4kV max




E328229






164mm (6.46") 91.5mm (3.60") 38mm (1.50") 155mm (6.10") 73.5mm (2.89") 0.70kg (1.54lb)

7

147

155

7 3 . 5

9 1 . 5

38

164

white

black

green

red

blue

ACpower

6


164mm (6.46") 91.5mm (3.60") 38mm (1.50") 155mm (6.10") 73.5mm (2.89") 0.70kg (1.54lb)

147

155

7 3 . 5

9 1 . 5

38

164

50.5

16 white

black

green

redblue

ACpower


140mm (5.51") 91.5mm (3.60") 38mm (1.50") 131mm (5.16") 73.5mm (2.89") 0.59kg (1.30lb)

123

131

7 3 . 5

9 1 . 5

38

white

black

green

red

blue

ACpower

5



INDUSTRIAL LIGHTING BALLASTS 250, 400 WATT 230V for MH/HPS Lamps

Definition:


Halide (MH) or High Pressure Sodium (HPS) lamps

Applications:Widely used in street lighting, stadium lighting, and industrial lighting


• Designed and manufactured with premium long-life

components

• Dimming options available, such as: 0-10V, preset program

dimming, and step dimming• Communications protocol: Zigbee, DALI, and GSM

• Easy initial installation or eld replacement of magnetic

ballasts

• Fulham’s Electronic HID Ballasts compensate for input

voltage uctuations and provide icker-free operation



INDUSTRIAL LIGHTING BALLASTS 250, 400 WATT 230V for MH/HPS Lamps

CATALOG NUMBER INPUT VOLTS

(V)

LINE CURRENT

(A)

INPUT POWER

(W)

MINIMUM

POWER FACTOR

TC MAX

(ºC)

CASE &

WIRING DIAGRAM

250 1 HGE-230-250-JSSLK 220-240 1.23 275 ≥ 0.98 80 8

400 1 HGE-230-400-JSSLK 220-240 1.93 430 ≥ 0.98 80 8

LAMP DATA

WATTS NUMBER


• CE Marking

• ISO 9001

Performance Requirements:Input Voltage: 220-240V, 50/60Hz


Total Harmonic Distortion (THD): <10%

Operating Frequency (Typical): 70-120kHz

Crest Factor: <1.7

Protections:





• Thermal protection



• Ignition pulse is 5kV max




8


214mm (8.43") 98.5mm (3.88") 58.7mm (2.31") 202mm (7.95") 80mm (3.15") 1.3kg (2.87lb)

8 0

9 8 .

5

214

187

5 8 .

7



INDUSTRIAL LIGHTING BALLASTS 250, 400 WATT 230V for MH/CDM Lamps


(V)

LINE CURRENT

(A)

INPUT POWER

(W)

MINIMUM

POWER FACTOR

TC MAX

(ºC)

CASE &

WIRING DIAGRAM

250 1 HXE-230-250-HBSLS 220-240 1.23 275 ≥ 0.98 80 9

400 1 HXE-230-400-HBSLS 220-240 1.93 430 ≥ 0.98 80 9

LAMP DATA

WATTS NUMBER

Definition:



Applications:

sculptured eaves, and more









240mm (9.44") 95mm (3.74") 65mm (2.56") 226mm (8.90") 40mm (1.57") 0.85kg (1.87lb)

9 6

5

6

4 0

2 6

210

240

226

9 5



INDUSTRIAL LIGHTING BALLASTS 140, 150 WATT 230V and 150 WATT 120-277V for use with:

PHILIPS CosmoWhite 140W Lamps

GE StreetWiseTM 150W Lamps

SYLVANIA Urban White 140W Lamps

Definition:



Applications:

Outdoor: Road lighting, port lighting, recreational

park lighting, etc.

Indoor: Large (highbay) retail outlets, warehouses,

manufacturing facilities, etc.


• Designed for newer energy efcient lamps

• Up to 118lm/W, perfect for OEM or retrot applications

• 2800K color temperature, Ra 66

• Compact housing is easy to install and suitable for small lamp xtures

• Up to 20,000 hours lifetime

• 50%-100% dimming

• Waterproof rating: IP65




INDUSTRIAL LIGHTING BALLASTS 140, 150 WATT 230V and 150 WATT 120-277V for use with:

PHILIPS CosmoWhite 140W Lamps

GE StreetWiseTM 150W Lamps

SYLVANIA Urban White 140W Lamps


(V)

LINE CURRENT

(A)

INPUT POWER

(W)

MINIMUM

POWER FACTOR

TC MAX

(ºC)

CASE &

WIRING DIAGRAM

140 1 HXX-230-140-HSSLW 220-240 0.71 156 ≥ 0.95 80 10

150 1 HXE-230-150-JSSLW 220-240 0.77 167 ≥ 0.95 80 10

150 1 HXX-UNV-150-JSSLW 120-2771.54@120V

0.61@277V 167 ≥ 0.95 80 10

LAMP DATA

WATTS NUMBER

10


182mm (7.17") 113mm (4.45") 41mm (1.61") 173mm (6.81") 70mm (2.76") 1.23kg (2.71lb)

160

4 1

173

182

7 0

1 1 3


• cULus Listed (Outdoor Type 1)

• FCC Part 18, for Non-Consumer Equipment

• ISO 9001: 2008


Input Voltage: See above chart for 230V and

UNV 120-277 V, 50/60Hz models



220-240V 140W, 150W: <10%

120-277V 150W: <15%


Crest Factor: <1.7

Protections:









• Remote Mounting up to 1.5m• Power to lamp must be cycled (on/off/on) after replacing lamp


E328229



STREET LIGHTING BALLASTS150 WATT 230V for MH/HPS Lamps

Around the globe, “green” technology is quickly becoming the

preferred choice for lighting due to its energy saving

properties and ROI potential. At Fulham, we are committed to

promoting the adoption of cost efficient lighting technologiesin new elds. For example, we offer a complete EHID road lighting

solution that reduces power consumption by 40-60% compared

with traditional street lights.


• Easily retrot existing magnetic ballast applications

• One Fulham Electronic HID ballast replaces a magnetic ballast,

capacitor, and ignitor• More stable operation and faster warm-up time







• Waterproof rating: IP65

Applications:

Street lighting, port lighting, recreational park lighting, etc.



STREET LIGHTING BALLASTS

150 WATT 230V for MH/HPS Lamps

11

CASE LENGTH CASE WIDTH HEIGHT MOUNTING LENGTH MOUNTING WIDTH WEIGHT182mm (7.17") 113mm (4.45") 41mm (1.61") 173mm (6.81") 70mm (2.76") 1.23kg (2.71lb)


Input Voltage: 220-240V, 50/60Hz


Total Harmonic Distortion (THD): <15%


Crest Factor: <1.7

Protections:











• Ballast output will shutdown after 30 minutes if lamp fails to ignite

4 1

CATALOG

NUMBER

INPUT VOLTS

(V)

LINE CURRENT

(A)

INPUT POWER

(W)

MINIMUM

POWER FACTOR

TC MAX

(ºC)

CASE & WIRE

DIAGRAM

150 1 MH&HPS HGE-230-150-JSSLW 220-240 0.77 167 ≥ 0.95 80 11

LAMP DATA

WATTS NUMBER SOURCE



HORTICULTURAL LIGHTING BALLASTS



CATALOG NUMBER NOTES APPROVAL INPUT VOLTAGE (V) INPUT CURRENT (A) INPUT POWER (W) LAMP TYPE (W/V)

HXX-277-1K-JGSHW 277 3.9 1050 1000/400

HXX-480-575-JGSCW 480 1.3 605 575/230

HXX-277-600-JGSHW 277 2.3 645 600/400

HXX-347-600-JGSHW 347 1.9 645 600/400

HXX-480-600-JGCUS UL 480 1.37 645 600/400

HPX-MLT-600-JGSLB UL 120-240 5.5/2.75 650/630 600/230

HPX-MLT-600-JGSLK UL 120-240 5.5/2.75 650/630 600/230

HPX-MLT-600-JGSLM1 3 step

dimming model UL 120-240 5.5/2.75 650/630 600/230

HXX-MLT-600-JGSLM UL 120-240 5.5/2.75 650/630 600/230

HXX-277-750-JGSHW 277 2.91 790 750/400

HXX-347-750-JGCUS UL 347 2.31 790 750/400

HXX-277-1K-JGTUS UL 277 3.85 1050 1000/400

HXX-347-1K-JGTUS UL 347 3.07 1050 1000/400

HXX-347-1K-JGSHW 347 3.07 1050 1000/400

HXA-400-1K-JGSHW 400 2.61 1045 1000/400

HPX-MLT-1K-JGSLK UL 120-240 9.2/4.5 1110/1070 1000/400

HPX-MLT-1K-JGSLM1 3 step

dimming model UL 120-240 9.2/4.5 1110/1070 1000/400

HXX-MLT-1K-JGSLB UL 120-240 9.2/4.5 1110/1070 1000/400

HXX-MLT-1K-JGSLM UL 120-240 9.2/4.5 1110/1070 1000/400

HXX-230-600-SGTLS 230 2.85 645 600/230

HXE-230-600-SGCUS 230 2.85 645 600/400

HXX-347-600-SGCUS 347 1.88 645 600/400

HXX-347-600-SGSHW 347 1.9 645 600/400

HXX-347-750-SGCUS 347 2.31 790 750/400

HME-400-750-SGCUS 400 1.98 790 750/400

HXE-400-750-SGTUS 400 1.98 790 750/400

HXE-400-750-SGCUS 400 1.98 790 750/400

HXE-400-1K-SGTUS 400 2.61 1045 1000/400

HXX-480-750-JGSCW 480 1.68 790 750/400

HXX-480-750-JGCUS UL 480 1.68 790 750/400

HXE-400-600-SGTUS 400 1.61 645 600/400

HXX-380-600-SGSHW 380 1.37 645 600/400

HPX-MLT-1K-JGSLG1 UL 120-240 9.2/4.5 1110/1070 1000/400

HXX-MLT-600-JGSLW UL 120-240 5.5/2.75 650/630 600/230

HXX-MLT-1K-JGSLW UL 120-240 9.2/4.5 1110/1070 1000/400

HORTICULTURAL LIGHTING BALLASTS



Fulham Latin America

(Latin America)

12705 S. Van Ness Avenue

Hawthorne, CA 90250

U.S.A.

Tel: (407) 758-2564

[email protected]

Fulham Company GmbH (Europe)

Karolinenstrasse 18D-58507 Lüdenscheid

Germany

Handelsregister Iserlohn: HR B 6286

USt.-IdNr.: DE253959344

Fon: +49 2351 4327416

Fax: +49 2351 6567349

Mobile: +49 152-0-9838495

[email protected]

Fulham Company Ltd. (Middle East)

LOB-2, No 127 P.O. Box 261051

Jebel Ali Free Zone, Dubai, UAE

Tel: +9714-8873577

Fax: +9714-8873599

[email protected]

Fulham (India) Pvt. Ltd.

343, Kaliandas Udyog Bhavan

Sadanand Tandel Marg

Near Century Bazar, Prabhadevi

Mumbai - 400025

Tel: +91 22 66388775-9

[email protected]

[email protected]

Fulham (India) Pvt. Ltd.Survey No. 26-3

Village Narhe

Taluka Haveli,

District: Pune 411041

Tel: +91 20 24690703/4

Fax: +91 20 24690712

[email protected]

[email protected]

Fulham Headquarters (USA)

12705 S. Van Ness Avenue

Hawthorne, CA 90250

Tel: (323) 599-5000

Fax: (323) 754-9060

[email protected]

www.fulham.com

Fulham Company Ltd. (International)

Unit6

,6 /F, Kowloon Plaza485 Castle Peak Road

Cheung Sha Wan, Kowloon

Hong Kong

Tel: +852-2314-4801

Fax: +852-2314-4186

[email protected]

Fulham Electronic Co. Ltd. (North China)

No. 9 Xingchang Road, Nanshaozhen

Changping Science Park

Beijing 102200

P.R. China

Tel : +86-10-6073-5858Fax : +86-10-6073-3765

[email protected]

Fulham Electronic Co. Ltd. (South China)

Room 1402, Block D, The First Place

Wealth Centre

No. 200 Hongfu Road

The South Dongguan City,

Guangdong Province

P.R. China

Tel: +0769-2202 7555

Fax: +0769-2202 7553

[email protected]

Fulham Electronic Co. Ltd. (Central China)

Room 312-315, Xing Yuan

Technology Plaza

No 418, Gui Ping Road

Caohe-Jing Hi-Tech Park

Shanghai, P.R. China

Post Code: 200233

Tel: +86-021-6495-2777

Fax: +86-021-5426-5271

[email protected]

Fulham Co., Inc. (Canada)

24 Kicking Horse Way

Port Moody, BC, Canada, V3H 0G5

Tel: (604) 288-2609

Fax: (604) 648-9065

[email protected]

www.fulham.com/chinese

China EHID Ballast Brochure FINAL 1013

Documents

Transcript of China EHID Ballast Brochure FINAL 1013