Chiko Solar and Metal sheet roof mount solution

CHIKO SOLAR INDUSTRY CO., LTD

WWW.CHIKOSOLAR.COM [email protected]

AS 1170.2

CHIKO SOLARMETAL SHEET ROOF

SOLAR PV MOUNT SOLUTIOINS

CHIKO provides full range of metal sheet roof mounting system includes rail , rail joiner ,mid clamp , end clamp,

supporting bracket/clamp



Product Classification



Paralleled to the roof1.Tin roof bracketTin roof brackets are fixed to roof with self-screw wooden screws and drilling is required.





1.1. Self-locking bolt systemChiko Self-locking bolt system can be universally used on every type of trapezoidal metal sheet roof profiles.

1.1. L-feet bracketChiko L-feet is the most common used bracket for trapezoidal metal sheet roof profiles.



1.1. L-feet bracketPackage: All required components required



Project referenceCHIKO SOLAR INDUSTRY CO., LTD


1.2. SS brackets

CHIKO SS brackets are Made of material stainless steel SUS 304, suitable for Trim-deck and similar metal roof profiles.



1.3. Folded-plate Trapezoidal bracketIt’s first designed for Japanese Folded-plate Trapezoidal roof and was developed to fit Trapezoidal metal sheet roof

either.



ApplicationCHIKO SOLAR INDUSTRY CO., LTD


1.3. Hanger boltHanger bolt is widely used for trapezoidal roof , Asbestos cement roof in North Europe, Asphalt Shingle roof in North America,

New Zealand etc.



ApplicationCHIKO SOLAR INDUSTRY CO., LTD


2. Metal sheet roof clampsNo need to drill, no damage to roof, CHIKO tin roof clamps provide a non-penetrating solution for your ideal installation.

Below brackets are widely applied to klip-lok / standing seam tin roof profiles.

NO

DRILLIN

G

NO

DAMAGE



2.1. klip-lok clampCHIKO SOLAR INDUSTRY CO., LTD


CHIKO klip-lok clamp is especially designed for klip-lok roof 700 & 406 profile that manufacture by BlueScope Lysaght .



ApplicationChiko klip-lok clamp can work together with L/T feet, tilt kit and Chiko self-ballasted system.



2.2. Standing Seam clampChiko SS clamp is made of high grade stainless steel, and designed to universally fit for Standing Seam roof.



ApplicationSS clamp usually work together with L feet, and can be widely used on different standing seam roofs.



2.3. Rail-less corrugated roof clampThis clamp can be installed right onto corrugated metal sheet roof, corrugated cement roof, requires no rails. Modules can be at

tached with ease.



Tilt systemChiko Tilt system is widely applied in flat or slight pitched tin roof to tilt PV panels into certain angles

Tilt front leg

Tilt rear leg



ApplicationWorking with different roof clamps or attach directly onto roof, tilt system can

be applied to various kinds of profiles to obtain a suitable inclination.



2. Self-ballasted systemAn versatile innovative design that can be applied for tin roof and flat roof ,

and even landscape.



ApplicationThis self-ballasted system can be easily attached to klip-lok roof or trapezoidal roof.



Chiko Solar and Metal sheet roof mount solution

Documents

Transcript of Chiko Solar and Metal sheet roof mount solution