Chem Cad Features
Transcript of Chem Cad Features
-
7/25/2019 Chem Cad Features
1/13
Chem Cad Features
-
7/25/2019 Chem Cad Features
2/13
-
7/25/2019 Chem Cad Features
3/13
-
7/25/2019 Chem Cad Features
4/13
Inputs and OutputsText Reports
CHEMCAD can produce a wide array of customizable text-based simulationreports, based on stream data, Unit Operation data, flow sheet data, or
dynamics. If you prefer, you can produce one consolidated report incorporating
all of the available text report data.
Report Setup
Before you run, view, or print reports, you should check the settings thatdetermine which programs CHEMCAD will use to display and print your reports.
For individual text reports, you can choose to use either WordPad or Excel.
By default, CHEMCAD uses WordPad. To switch to Excel, select Tools > Options >
Report Viewer Settings and then check the box called Use Microsoft Excel instead
of WordPad. Click OK to return to the main CHEMCAD workspace.
For the consolidated report, you can use either Word or Excel. To choose a
program to display and print this report, select Report > Consolidated Report,
then click Report Format at the top of the Consolidated Report menu.
-
7/25/2019 Chem Cad Features
5/13
Types of Report
Stream-based Reports
UnitOp-based Reports
Flow sheet-based Reports
Dynamics Reports
Consolidated Report
Graphical Reports
-
7/25/2019 Chem Cad Features
6/13
-
7/25/2019 Chem Cad Features
7/13
-
7/25/2019 Chem Cad Features
8/13
Graphical ReportsThermo physical Data Graphs
CHEMCAD offers a number of graphical reports that relate specifically to the selected
components and thermodynamics options. To access any of these plots, select the
appropriate item from the Plot menu.TPXY
This selection generates vapor-liquid equilibrium curves between any two
components, with an optional third component. You can include TPXY, TXY, activity
coefficient, and fugacity coefficient curves.
Binary LLE
This selection generates liquid-liquid equilibrium curves between any two
components.
Binodal Plot
This selection generates a ternary phase diagram showing the distribution of three
selected components in two liquid phases.
Residue CurvesThis selection generates and plots a graphical display of distillation zones, azeotropes,
and residue curves associated with a user-specified tertiary mixture.
Binodal/Residue Curves
This selection creates a plot that combines the curves from a binodal plot and a
residue curve plot. This is useful when working with heterogeneous azeotropic
distillation.
-
7/25/2019 Chem Cad Features
9/13
Flow sheet-based Graphs
To view graphical reports that reflect your overall simulation, select one of the
following from the Plot menu:
Stream Properties: Plots one selected stream property for a selected stream in
the flow sheet
Phase Envelopes: Plots a phase envelope for a given stream, highlighting the
critical point of the mixture; can include plots at vapor fractions
Composite Curves: Plots composite heat curves for the entire flow sheet, as
well as optional heat curves for individual UnitOps
Pseudo component Curves: Displays a plot of one or more distillation curves
for a stream.
-
7/25/2019 Chem Cad Features
10/13
UnitOp-based Plots
CHEMCAD offers several plots that display data for a single UnitOp. To access any of
these plots, select Plot > UnitOp Plots and then select one of the following options.Tower Profiles
This selection plots compositions, temperature, and flow profiles for distillation columns.
Heat Curves
This selection plots heating and cooling curves for a selected heat exchanger.
Plug Flow Reactor Profile
This selection plots the temperature or composition profiles along the axial length of a
kinetic plug flow reactor.
Pipe Profile
This selection plots fluid properties for pipe UnitOps along the axial length of the pipe.
This plot requires that the pipe contain multiple segments.
Controller Convergence
For controllers that have not converged, this plot enables you to diagnose the controller
behavior that is preventing convergence. The plot shows how the controller error
function changes with iteration.
-
7/25/2019 Chem Cad Features
11/13
-
7/25/2019 Chem Cad Features
12/13
Process Flow DiagramsFlow sheet Databoxes
CHEMCAD offers four types of databoxes:
Stream Box: Lists the streams that you select in a single table, along with the
stream properties that you choose to include
UnitOp Box: Generates a separate databox for each selected UnitOp
TP Box: Generates separate summary databoxes for selected streams
Excel Range Box: References a range of cells from an Excel worksheet
TP BoxesCHEMCAD can create databoxes, called TP boxes, which display any combination of
temperature, pressure, and flow rate for all streams or selected streams on a flow sheet.
Excel Range BoxesAn Excel range box displays dynamic data from a specified cell range in a specified
Excel worksheet.
-
7/25/2019 Chem Cad Features
13/13
TP boxes added to a simple flow sheet