Chem Cad
1
I had the same problem and had to deactivate my anti virus software while I uninstalled and re-installed ChemCad. Performed the following instructions and ChemCad is working again. Instruction: 1. Install Chemcad-6.3.1-4168.exe 2. Extract server.zip and run Setup.exe to install Sentinel Server 3. Extract LM7admin.zip to C:\ directory 4. In extracted LM7admin directory, run WlmAdmin.exe. Select Edit and Defined Server List option. Enter your local machine IP address and click OK to add server 5. Click on new server address in tree menu and right click to select Add feature|From a File|Add feature from file|To Server and Its File. When prompted browse and select "lservrc" file in ----- folder 6. When you expand your defined server should see features available 7. Open Chemcad, no license screen appears, click setup and then select Add/Remove Server option 8. If server not in list, select "license server" under the Select server type drop down and then enter IP address used in Step 4 9. Chemcad is -----ed and run with all features! 6.5.2
-
Upload
kenny-ruiz -
Category
Documents
-
view
26 -
download
3
description
Chemcad
Transcript of Chem Cad
I had the same problem and had to deactivate my anti virus software while I uninstalled and re-installed ChemCad. Performed the following instructions and ChemCad is working again.Instruction:1. Install Chemcad-6.3.1-4168.exe2. Extract server.zip and run Setup.exe to install Sentinel Server3. Extract LM7admin.zip to C:\ directory4. In extracted LM7admin directory, run WlmAdmin.exe. Select Edit and Defined Server List option. Enter your local machine IP address and click OK to add server5. Click on new server address in tree menu and right click to select Add feature|From a File|Add feature from file|To Server and Its File. When prompted browse and select "lservrc" file in ----- folder6. When you expand your defined server should see features available7. Open Chemcad, no license screen appears, click setup and then select Add/Remove Server option8. If server not in list, select "license server" under the Select server type drop down and then enter IP address used in Step 49. Chemcad is -----ed and run with all features!
6.5.2
