Chapter 6 sectioning - 2010
-
Upload
shelly-wilke -
Category
Education
-
view
305 -
download
4
Transcript of Chapter 6 sectioning - 2010
![Page 1: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/1.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Chapter 6Sectioning
Basic TopicsAdvanced Topics
Exercises
![Page 2: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/2.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Sectioning: Basic TopicsSummary6.1) Sectional Views6.2) Types of Sections
6.2.1) Full section6.2.2) Half section6.2.3) Offset section
![Page 3: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/3.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Sectioning: Advanced Topics6.2) Types of Sections
6.2.4) Aligned section6.2.5) Rib and web sections6.2.6) Broken section6.2.7) Removed section6.2.8) Revolved section6.2.9) Non-sectioned parts6.2.10) Thin sections
![Page 4: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/4.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Sectioning: ExercisesExercise 6-2: Full sectionExercise 6-4: Half sectionExercise 6-5: Offset sectionExercise 6-7: Aligned section
![Page 5: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/5.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Sectioning
Summary
![Page 6: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/6.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Summary What will we learn in Chapter 6?
→ How to create various types of sectional views. (Sectional views allow you to see inside an object.)
Key points→ Using a sectional view can be very useful
for parts that have complex interior geometry.
![Page 7: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/7.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Sectioning
6.1) Sectional Views
![Page 8: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/8.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Sectional Views A sectional view or section looks
inside an object. → Sections are used to clarify the interior
construction of a part that can not be clearly described by hidden lines in exterior views.
→ By taking an imaginary cut through the object and removing a portion, the inside features may be seen more clearly.
![Page 9: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/9.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Sectional Views What is this? An ugly rock?
![Page 10: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/10.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Sectional Views A pretty rock?
![Page 11: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/11.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Creating a Section ViewThe part is cut
using an imaginary cutting plane.
![Page 12: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/12.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Creating a Section View The unwanted portion is mentally discarded
exposing the interior construction.
![Page 13: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/13.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Section Example
Notice how the cutting plane is indicated.
Notice how the cut material is shown.
Sectional view label
![Page 14: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/14.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Lines Used in Section Views Cutting Plane Line: Used to show where
the object is being cut. → (Phantom line type)
![Page 15: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/15.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Lines Used in Section ViewsShows where the part is being cut.
Arrows point to the portion being kept.
Section Lines
![Page 16: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/16.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Lines Used in Section Views Section Lines: Section lines are used to
indicate where the cutting plane cuts the material. → Section lines are thin lines. → Section line symbols are chosen according
to the material of the object → Section lines are generally drawn at a 45
angle.
![Page 17: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/17.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Lines Used in Section ViewsCommon Section Line Symbols
![Page 18: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/18.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Lines Used in Section ViewsCommon Section Line Symbols
More section line symbols shown in Fig. 6-4
![Page 19: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/19.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Rules of Sectioning Rule 1:
A section lined area is always completely bounded by a visible outline.
![Page 20: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/20.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Rules of Sectioning Rule 2:
The section lines in all areas should be parallel. → Section lines
shown in opposite directions indicate a different part.
![Page 21: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/21.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Rules of Sectioning Rule 3: All the visible edges behind the
cutting plane should be shown.
![Page 22: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/22.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Rules of Sectioning Rule 4:
Hidden features should be omitted in all areas of a section view. → Exceptions include
threads and broken out sections.
![Page 23: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/23.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Sectioning
6.2) Types of Sections
![Page 24: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/24.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Types of SectionsThe type of section used depends on
the situation and what information needs to be conveyed.
Types of sections→Full Section→Half Section→Offset Section→etc …
![Page 25: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/25.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Full Section To create a full section, the cutting plane
passes fully through the object. → Used in many cases to avoid having to
dimension hidden lines.
![Page 26: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/26.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Exercise 6-2
Full Section
![Page 27: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/27.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Exercise 6-2 Given the top and right side views, sketch
the front view as a full section. → The material used is steel.
![Page 28: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/28.jpg)
Fill in the visible lines in the front full sectional view
![Page 29: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/29.jpg)
![Page 30: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/30.jpg)
Fill in the section lines in the front full sectional view
![Page 31: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/31.jpg)
![Page 32: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/32.jpg)
Section lines are bounded by visible lines
Visible features behind the cutting plane are shown.
![Page 33: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/33.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Half Section A half
section exposes the interior of one half of an object while retaining the exterior of the other half.
![Page 34: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/34.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Half Section Half sections
are used mainly for symmetric objects or assembly drawings.
![Page 35: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/35.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Half Section A centerline
is used to separate the two halves.
Hidden lines should not be shown on either half.
![Page 36: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/36.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Exercise 6-4
Half Section
![Page 37: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/37.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Exercise 6-4 Given the front and right side views,
sketch the top view as a full section and create a half sectioned front view. → The material is brass.
![Page 38: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/38.jpg)
Fill in the visible lines in the top full section view.
![Page 39: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/39.jpg)
![Page 40: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/40.jpg)
Fill in the section lines in the top full section view.
![Page 41: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/41.jpg)
![Page 42: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/42.jpg)
Fill in the visible lines in the right side half section view.
![Page 43: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/43.jpg)
![Page 44: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/44.jpg)
Fill in the section lines in the right side half section view.
![Page 45: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/45.jpg)
![Page 46: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/46.jpg)
No hidden lines
Center line divides the halves
![Page 47: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/47.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Offset Section An offset section is produced by bending
the cutting plane to show features that don’t lie in the same plane.
![Page 48: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/48.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Exercise 6-5
Offset Section
![Page 49: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/49.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Exercise 6-5 Given the front and top views, sketch the
three missing section views in their appropriate places. The material is cast iron.
![Page 50: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/50.jpg)
![Page 51: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/51.jpg)
![Page 52: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/52.jpg)
![Page 53: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/53.jpg)
![Page 54: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/54.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Aligned Section In order to
include angled elements in a section, the cutting plane may be bent so that it passes through those features.
Skip advanced topic
![Page 55: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/55.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Conventions of RevolutionFeatures are
revolved to the projection plane, and then projected over.
![Page 56: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/56.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Exercise 6-7
Aligned Section
![Page 57: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/57.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Exercise 6-7 Given the front and unrevolved right side
views, sketch the right side view as an aligned section using the conventions of revolution. The material is cast iron.
![Page 58: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/58.jpg)
Fill in the visible lines in the sectional view.
![Page 59: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/59.jpg)
Fill in the section lines.
![Page 60: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/60.jpg)
Notice how much clearer the sectional view is.
![Page 61: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/61.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Rib and Web Sections To avoid a false
impression of thickness and solidity, ribs and webs are not sectioned.
Cutting plane passes through the web
No section lines in cut area of web
![Page 62: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/62.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Rib and Web SectionsIf the cutting
plane passes crosswise through the rib or web, we include section lines.
Cutting plane passes through the web
Section lines in cut area of web
![Page 63: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/63.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Broken Section Sometimes only a partial or broken out
section is needed. → Hidden lines are shown in the non-sectioned
area of a broken section.
![Page 64: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/64.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Removed Section A removed
section is one that is not in direct projection of the view containing the cutting plane.
![Page 65: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/65.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Revolved Section The cross sectional shape of an object
may be shown in the longitudinal view by means of a revolved section.
![Page 66: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/66.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Non – Sectioned Parts It is common practice to show standard
parts 'in the round' or un-sectioned.→ Nuts→ Bolts→ Rivets→ Shafts→ Screws
![Page 67: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/67.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Thin SectionsFor extremely thin parts of less than 4
mm thickness, the parts should be shown in solid black or without section lines.→ Sheet metal → Washers→ Gaskets
![Page 68: Chapter 6 sectioning - 2010](https://reader035.fdocuments.us/reader035/viewer/2022081421/58f27d4e1a28abb2158b45af/html5/thumbnails/68.jpg)
Copyright ©2009 by K. PlantenbergRestricted use only
Sectioning
The End