Chapter 4 Creating Placed Features. After completing this chapter, you will be able to –Create...
-
Upload
lynne-hill -
Category
Documents
-
view
223 -
download
2
Transcript of Chapter 4 Creating Placed Features. After completing this chapter, you will be able to –Create...
![Page 1: Chapter 4 Creating Placed Features. After completing this chapter, you will be able to –Create fillets –Create chamfers –Create holes –Create internal.](https://reader035.fdocuments.us/reader035/viewer/2022062308/56649dda5503460f94ad13cc/html5/thumbnails/1.jpg)
Chapter 4Creating Placed Features
![Page 2: Chapter 4 Creating Placed Features. After completing this chapter, you will be able to –Create fillets –Create chamfers –Create holes –Create internal.](https://reader035.fdocuments.us/reader035/viewer/2022062308/56649dda5503460f94ad13cc/html5/thumbnails/2.jpg)
• After completing this chapter, you will be able to– Create fillets– Create chamfers– Create holes– Create internal and external threads– Shell a part– Add face draft to a part– Create work axes– Create work points– Create work planes– Pattern features
Chapter 4 - Objectives
![Page 3: Chapter 4 Creating Placed Features. After completing this chapter, you will be able to –Create fillets –Create chamfers –Create holes –Create internal.](https://reader035.fdocuments.us/reader035/viewer/2022062308/56649dda5503460f94ad13cc/html5/thumbnails/3.jpg)
Fillets• Fillets add material• Rounds remove material
– Fillet dialog box• Constant
• Variable
• Setbacks
– Methodology
– Edit fillet’s type & radius
![Page 4: Chapter 4 Creating Placed Features. After completing this chapter, you will be able to –Create fillets –Create chamfers –Create holes –Create internal.](https://reader035.fdocuments.us/reader035/viewer/2022062308/56649dda5503460f94ad13cc/html5/thumbnails/4.jpg)
Fillets• Constant Tab
– Same radius from beginning to end
– Single set or multiple set
• Select Edge and Radius– Preview image
• Select Mode– Edge
– Loop
– Feature
– All Fillets
– All Rounds
![Page 5: Chapter 4 Creating Placed Features. After completing this chapter, you will be able to –Create fillets –Create chamfers –Create holes –Create internal.](https://reader035.fdocuments.us/reader035/viewer/2022062308/56649dda5503460f94ad13cc/html5/thumbnails/5.jpg)
Fillets• Constant Tab
– More options – Roll along sharp edges
– Rolling ball where possible
– Automatic edge chain
– Preserve all features
![Page 6: Chapter 4 Creating Placed Features. After completing this chapter, you will be able to –Create fillets –Create chamfers –Create holes –Create internal.](https://reader035.fdocuments.us/reader035/viewer/2022062308/56649dda5503460f94ad13cc/html5/thumbnails/6.jpg)
Fillets• Variable Tab
– Different start and end radius
– Edges
– Point
– Radius
– Position
– Smooth Radius Transition
![Page 7: Chapter 4 Creating Placed Features. After completing this chapter, you will be able to –Create fillets –Create chamfers –Create holes –Create internal.](https://reader035.fdocuments.us/reader035/viewer/2022062308/56649dda5503460f94ad13cc/html5/thumbnails/7.jpg)
Fillets• Setbacks Tab
– Transition from a vertex
– Three or more filleted edges meet at a vertex
– Fillets can have different radius
![Page 8: Chapter 4 Creating Placed Features. After completing this chapter, you will be able to –Create fillets –Create chamfers –Create holes –Create internal.](https://reader035.fdocuments.us/reader035/viewer/2022062308/56649dda5503460f94ad13cc/html5/thumbnails/8.jpg)
Chamfers• Chamfers
–Beveled edges
–Interior & exterior edges
–Single or multiple selection
–Edit type or distance
–Method• Distance
• Distance and Angle
• Two Distances
![Page 9: Chapter 4 Creating Placed Features. After completing this chapter, you will be able to –Create fillets –Create chamfers –Create holes –Create internal.](https://reader035.fdocuments.us/reader035/viewer/2022062308/56649dda5503460f94ad13cc/html5/thumbnails/9.jpg)
Chamfers• Chamfers
– Method• Distance
• Distance and Angle
• Two Distances
![Page 10: Chapter 4 Creating Placed Features. After completing this chapter, you will be able to –Create fillets –Create chamfers –Create holes –Create internal.](https://reader035.fdocuments.us/reader035/viewer/2022062308/56649dda5503460f94ad13cc/html5/thumbnails/10.jpg)
Chamfers• Chamfers
–Edge and Face• Edge
• Face
• Flip
–Distance and Angle• Distance
• Angle
–Edge Chain and Setback• Edge Chain
• Setback
• Preserve All Features
![Page 11: Chapter 4 Creating Placed Features. After completing this chapter, you will be able to –Create fillets –Create chamfers –Create holes –Create internal.](https://reader035.fdocuments.us/reader035/viewer/2022062308/56649dda5503460f94ad13cc/html5/thumbnails/11.jpg)
Exercise 4-1
• Creating Fillets and Chamfers
![Page 12: Chapter 4 Creating Placed Features. After completing this chapter, you will be able to –Create fillets –Create chamfers –Create holes –Create internal.](https://reader035.fdocuments.us/reader035/viewer/2022062308/56649dda5503460f94ad13cc/html5/thumbnails/12.jpg)
Holes• Holes
– Drilled– Counterbore– Countersink– Hole Type
• Simple Hole• Tapped• Clearance Hole
• Holes dialog box• Placement• Hole Type• Size• Drill Point• Termination
![Page 13: Chapter 4 Creating Placed Features. After completing this chapter, you will be able to –Create fillets –Create chamfers –Create holes –Create internal.](https://reader035.fdocuments.us/reader035/viewer/2022062308/56649dda5503460f94ad13cc/html5/thumbnails/13.jpg)
Holes• Holes
–Placement• From Sketch
– Hole Center– Sketched Entities
• Linear– Select Face– 1st Reference Edge– 2nd Reference Edge
• Concentric– Select Face– Circular Face or Edge
• On Pont– Work Point– Positioned to an axis, edge or
work plane
![Page 14: Chapter 4 Creating Placed Features. After completing this chapter, you will be able to –Create fillets –Create chamfers –Create holes –Create internal.](https://reader035.fdocuments.us/reader035/viewer/2022062308/56649dda5503460f94ad13cc/html5/thumbnails/14.jpg)
Holes• Tapped Hole
– Thread Type– Size– Designation– Class– Diameter– Full Depth– Left Hand– Right Hand
![Page 15: Chapter 4 Creating Placed Features. After completing this chapter, you will be able to –Create fillets –Create chamfers –Create holes –Create internal.](https://reader035.fdocuments.us/reader035/viewer/2022062308/56649dda5503460f94ad13cc/html5/thumbnails/15.jpg)
Holes• Clearance Hole
– Standard– Fastener Type– Size– Fit
![Page 16: Chapter 4 Creating Placed Features. After completing this chapter, you will be able to –Create fillets –Create chamfers –Create holes –Create internal.](https://reader035.fdocuments.us/reader035/viewer/2022062308/56649dda5503460f94ad13cc/html5/thumbnails/16.jpg)
Exercise 4-2
• Creating Holes
![Page 17: Chapter 4 Creating Placed Features. After completing this chapter, you will be able to –Create fillets –Create chamfers –Create holes –Create internal.](https://reader035.fdocuments.us/reader035/viewer/2022062308/56649dda5503460f94ad13cc/html5/thumbnails/17.jpg)
Threads• Threads
–Internal and external–Graphical representation–Thread feature–Hole tool vs. Thread tool–Thread Feature dialog–Excel spreadsheet
• C:\Program Files\Autodesk\Inventor 10\Design Data\Thread.xls
• Standards
![Page 18: Chapter 4 Creating Placed Features. After completing this chapter, you will be able to –Create fillets –Create chamfers –Create holes –Create internal.](https://reader035.fdocuments.us/reader035/viewer/2022062308/56649dda5503460f94ad13cc/html5/thumbnails/18.jpg)
Threads• Threads
–Location Tab• Face• Display in Mode• Thread Length
– Full Length– Flip– Length– Offset
–Specification Tab• Thread Type• Nominal Size• Pitch• Class• Right hand or Left hand
![Page 19: Chapter 4 Creating Placed Features. After completing this chapter, you will be able to –Create fillets –Create chamfers –Create holes –Create internal.](https://reader035.fdocuments.us/reader035/viewer/2022062308/56649dda5503460f94ad13cc/html5/thumbnails/19.jpg)
Exercise 4-3
• Creating Threads
![Page 20: Chapter 4 Creating Placed Features. After completing this chapter, you will be able to –Create fillets –Create chamfers –Create holes –Create internal.](https://reader035.fdocuments.us/reader035/viewer/2022062308/56649dda5503460f94ad13cc/html5/thumbnails/20.jpg)
Shelling• Shelling
– Thin walls (thickness)
– Remove material (scooping out)
– Hollow inside
– Shell dialog box
![Page 21: Chapter 4 Creating Placed Features. After completing this chapter, you will be able to –Create fillets –Create chamfers –Create holes –Create internal.](https://reader035.fdocuments.us/reader035/viewer/2022062308/56649dda5503460f94ad13cc/html5/thumbnails/21.jpg)
• Shelling– Remove Faces– Thickness– Direction
• Inside• Outside• Mid-plane
– Unique Face Thickness• Different thickness• Specific face thickness• More button
Shelling
![Page 22: Chapter 4 Creating Placed Features. After completing this chapter, you will be able to –Create fillets –Create chamfers –Create holes –Create internal.](https://reader035.fdocuments.us/reader035/viewer/2022062308/56649dda5503460f94ad13cc/html5/thumbnails/22.jpg)
Exercise 4-4
• Shelling a Part
![Page 23: Chapter 4 Creating Placed Features. After completing this chapter, you will be able to –Create fillets –Create chamfers –Create holes –Create internal.](https://reader035.fdocuments.us/reader035/viewer/2022062308/56649dda5503460f94ad13cc/html5/thumbnails/23.jpg)
Face Draft• Face Draft
– Feature that applies an angle
– Internal or external face
– Face Draft dialog box• Fixed Edge
• Fixed Plane
• Pull Direction– Direction
– Flip
• Faces– Arrow displayed & direction
• Draft Angle
![Page 24: Chapter 4 Creating Placed Features. After completing this chapter, you will be able to –Create fillets –Create chamfers –Create holes –Create internal.](https://reader035.fdocuments.us/reader035/viewer/2022062308/56649dda5503460f94ad13cc/html5/thumbnails/24.jpg)
Face Draft• Face Draft
– Fixed Edge• Pull Direction
• Select near edge to start draft
– Fixed Plane• Select planar face or
work plane
• Flip plane if needed
• Select planes to apply draft
![Page 25: Chapter 4 Creating Placed Features. After completing this chapter, you will be able to –Create fillets –Create chamfers –Create holes –Create internal.](https://reader035.fdocuments.us/reader035/viewer/2022062308/56649dda5503460f94ad13cc/html5/thumbnails/25.jpg)
Exercise 4-5
• Creating Face Drafts
![Page 26: Chapter 4 Creating Placed Features. After completing this chapter, you will be able to –Create fillets –Create chamfers –Create holes –Create internal.](https://reader035.fdocuments.us/reader035/viewer/2022062308/56649dda5503460f94ad13cc/html5/thumbnails/26.jpg)
Work Features• Work Features
– Special construction features
– Help position & define new features
– Parametrically attached
– Types• Work Planes
• Work Axes
• Work Points
– Different situations
![Page 27: Chapter 4 Creating Placed Features. After completing this chapter, you will be able to –Create fillets –Create chamfers –Create holes –Create internal.](https://reader035.fdocuments.us/reader035/viewer/2022062308/56649dda5503460f94ad13cc/html5/thumbnails/27.jpg)
Work Features• Creating a Work Axis
– Acts like a construction line
– Infinite in length
– Axis of rotation
• Creating Work Points– Grounded Work Point
• Positioned in 3D space
• Not associated
• Remains in the specified location
– 3D Move/Rotate dialog box
![Page 28: Chapter 4 Creating Placed Features. After completing this chapter, you will be able to –Create fillets –Create chamfers –Create holes –Create internal.](https://reader035.fdocuments.us/reader035/viewer/2022062308/56649dda5503460f94ad13cc/html5/thumbnails/28.jpg)
Exercise 4-6
• Creating Work Axes
![Page 29: Chapter 4 Creating Placed Features. After completing this chapter, you will be able to –Create fillets –Create chamfers –Create holes –Create internal.](https://reader035.fdocuments.us/reader035/viewer/2022062308/56649dda5503460f94ad13cc/html5/thumbnails/29.jpg)
Work Features• Creating Work Planes
– Understand when you need to create a work plane
– Rectangular plane– Parametric – Larger than the part– Edited and deleted like any
other feature– Methods – lots of solution
• Show Me animations
![Page 30: Chapter 4 Creating Placed Features. After completing this chapter, you will be able to –Create fillets –Create chamfers –Create holes –Create internal.](https://reader035.fdocuments.us/reader035/viewer/2022062308/56649dda5503460f94ad13cc/html5/thumbnails/30.jpg)
Work Features• Creating Work Planes
– Types of Work Planes• Angled work plane• Offset work plane• Tangent work plane• 3-point work plane• 2-edge or 2-axis work
plane• Midway between two
parallel planes
– Feature Visibility• Off or On
![Page 31: Chapter 4 Creating Placed Features. After completing this chapter, you will be able to –Create fillets –Create chamfers –Create holes –Create internal.](https://reader035.fdocuments.us/reader035/viewer/2022062308/56649dda5503460f94ad13cc/html5/thumbnails/31.jpg)
Exercise 4-7
• Creating Work Planes
![Page 32: Chapter 4 Creating Placed Features. After completing this chapter, you will be able to –Create fillets –Create chamfers –Create holes –Create internal.](https://reader035.fdocuments.us/reader035/viewer/2022062308/56649dda5503460f94ad13cc/html5/thumbnails/32.jpg)
Patterns•Patterns
–Duplicate the feature multiple times
–Distance or angle
–Types • Rectangular and circular
–Suppressed
–Child - parent relationship
–Editing
![Page 33: Chapter 4 Creating Placed Features. After completing this chapter, you will be able to –Create fillets –Create chamfers –Create holes –Create internal.](https://reader035.fdocuments.us/reader035/viewer/2022062308/56649dda5503460f94ad13cc/html5/thumbnails/33.jpg)
Patterns• Rectangular Patterns
– Rectangular pattern dialog box• Direction 1
• Direction 2
– Options - More button• Start
• Termination
• Orientation
![Page 34: Chapter 4 Creating Placed Features. After completing this chapter, you will be able to –Create fillets –Create chamfers –Create holes –Create internal.](https://reader035.fdocuments.us/reader035/viewer/2022062308/56649dda5503460f94ad13cc/html5/thumbnails/34.jpg)
Exercise 4-8• Creating Rectangular Patterns
![Page 35: Chapter 4 Creating Placed Features. After completing this chapter, you will be able to –Create fillets –Create chamfers –Create holes –Create internal.](https://reader035.fdocuments.us/reader035/viewer/2022062308/56649dda5503460f94ad13cc/html5/thumbnails/35.jpg)
Patterns• Circular Patterns
– Circular Pattern dialog box
• Placement• Creation Method• Positioning
Method• Linear Pattern
– Pattern Along a Path
• Ellipse, spline, series of curves
• 2D or 3D
![Page 36: Chapter 4 Creating Placed Features. After completing this chapter, you will be able to –Create fillets –Create chamfers –Create holes –Create internal.](https://reader035.fdocuments.us/reader035/viewer/2022062308/56649dda5503460f94ad13cc/html5/thumbnails/36.jpg)
Exercise 4-9
• Creating Circular Patterns
![Page 37: Chapter 4 Creating Placed Features. After completing this chapter, you will be able to –Create fillets –Create chamfers –Create holes –Create internal.](https://reader035.fdocuments.us/reader035/viewer/2022062308/56649dda5503460f94ad13cc/html5/thumbnails/37.jpg)
Exercise 4-10
• Creating Path Patterns
![Page 38: Chapter 4 Creating Placed Features. After completing this chapter, you will be able to –Create fillets –Create chamfers –Create holes –Create internal.](https://reader035.fdocuments.us/reader035/viewer/2022062308/56649dda5503460f94ad13cc/html5/thumbnails/38.jpg)
SummaryTo Do This
Create a hole feature Click the Point, Hole Center tool on the 2D Sketch toolbar to sketch a hole center (if using the From Sketch option). Click the Hole tool on the Part Features toolbar or on the Panel Bar.
Create a fillet feature Click the Fillet tool on the Part Features toolbar or on the Panel Bar.
Create a chamfer feature Click the Shell tool on the Part Features toolbar or on the Panel Bar.
Create a shell feature Click the Shell tool on the Part Features toolbar or on the Panel Bar.
Create a rectangular pattern Click the Rectangular Pattern tool on the Part Features toolbar or on the Panel Bar.
Create a circular pattern Click the Circular Pattern tool on the Part Features toolbar or on the Panel Bar.
![Page 39: Chapter 4 Creating Placed Features. After completing this chapter, you will be able to –Create fillets –Create chamfers –Create holes –Create internal.](https://reader035.fdocuments.us/reader035/viewer/2022062308/56649dda5503460f94ad13cc/html5/thumbnails/39.jpg)
SummaryTo Do This
Create a thread feature Click the Thread tool on the Part Features toolbar or on the Panel Bar.
Create a face draft Click the Face Draft tool on the Part Features toolbar or on the Panel Bar.
Create a work axis Click the Work Axis tool on the Part Features toolbar or on the Panel Bar.
Create a work point Click the Work Point tool on the Part Features toolbar or on the Panel Bar.
Create a grounded work point Click the Grounded Work Point tool on the Part Features toolbar or on the Panel Bar.
Create a work plane Click the Work Plane tool on the Part Features toolbar or on the Panel Bar.
Rectangular Pattern Click the Rectangular Pattern tool on the Part Features toolbar or on the Panel Bar.
Circular Pattern Click the Circular Pattern tool on the Part Features toolbar or on the Panel Bar.
![Page 40: Chapter 4 Creating Placed Features. After completing this chapter, you will be able to –Create fillets –Create chamfers –Create holes –Create internal.](https://reader035.fdocuments.us/reader035/viewer/2022062308/56649dda5503460f94ad13cc/html5/thumbnails/40.jpg)
Applying Your Skills
• Skill Exercise 4-1• Skill Exercise 4-2