Chapter 4 Control Volume Analysis Using Energy. Learning Outcomes ►Demonstrate understanding of...
-
Upload
edwina-fletcher -
Category
Documents
-
view
220 -
download
1
Transcript of Chapter 4 Control Volume Analysis Using Energy. Learning Outcomes ►Demonstrate understanding of...
![Page 1: Chapter 4 Control Volume Analysis Using Energy. Learning Outcomes ►Demonstrate understanding of key concepts related to control volume analysis including.](https://reader036.fdocuments.us/reader036/viewer/2022081519/56649e665503460f94b60e36/html5/thumbnails/1.jpg)
Chapter 4
Control Volume Analysis Using Energy
![Page 2: Chapter 4 Control Volume Analysis Using Energy. Learning Outcomes ►Demonstrate understanding of key concepts related to control volume analysis including.](https://reader036.fdocuments.us/reader036/viewer/2022081519/56649e665503460f94b60e36/html5/thumbnails/2.jpg)
Learning Outcomes
►Demonstrate understanding of key concepts related to control volume analysis including distinguishing between steady-state and transient analysis, distinguishing between mass flow rate and volumetric flow rate, and the meanings of one-dimensional flow and flow work.
►Apply mass and energy balances to control volumes.
![Page 3: Chapter 4 Control Volume Analysis Using Energy. Learning Outcomes ►Demonstrate understanding of key concepts related to control volume analysis including.](https://reader036.fdocuments.us/reader036/viewer/2022081519/56649e665503460f94b60e36/html5/thumbnails/3.jpg)
Learning Outcomes, cont.
►Develop appropriate engineering models for control volumes, with particular attention to analyzing components commonly encountered in engineering practice such as nozzles, diffusers, turbines, compressors, heat exchangers, throttling devices, and integrated systems that incorporate two or more components.
►Use property data in control volume analysis appropriately.
![Page 4: Chapter 4 Control Volume Analysis Using Energy. Learning Outcomes ►Demonstrate understanding of key concepts related to control volume analysis including.](https://reader036.fdocuments.us/reader036/viewer/2022081519/56649e665503460f94b60e36/html5/thumbnails/4.jpg)
Mass Rate Balance
time rate of change ofmass contained within the
control volume at time t
time rate of flow ofmass in acrossinlet i at time t
time rate of flowof mass out across
exit e at time t
ei mmdt
dm cv (Eq. 4.1)
![Page 5: Chapter 4 Control Volume Analysis Using Energy. Learning Outcomes ►Demonstrate understanding of key concepts related to control volume analysis including.](https://reader036.fdocuments.us/reader036/viewer/2022081519/56649e665503460f94b60e36/html5/thumbnails/5.jpg)
Mass Rate Balance
e
eii mm
dt
dm cv(Eq. 4.2)
Eq. 4.2 is the mass rate balance for control volumes with several inlets and exits.
In practice there may be several locations on the boundary through which mass enters or exits. Multiple inlets and exits are accounted for by introducing summations:
![Page 6: Chapter 4 Control Volume Analysis Using Energy. Learning Outcomes ►Demonstrate understanding of key concepts related to control volume analysis including.](https://reader036.fdocuments.us/reader036/viewer/2022081519/56649e665503460f94b60e36/html5/thumbnails/6.jpg)
Mass Flow Rate(One-Dimensional Flow)
►Flow is normal to the boundary at locations where mass enters or exits the control volume.
►All intensive properties are uniform with position over each inlet or exit area (A) through which matter flows.
vAV
m (Eq. 4.4b)
where
V is velocityv is specific volume
![Page 7: Chapter 4 Control Volume Analysis Using Energy. Learning Outcomes ►Demonstrate understanding of key concepts related to control volume analysis including.](https://reader036.fdocuments.us/reader036/viewer/2022081519/56649e665503460f94b60e36/html5/thumbnails/7.jpg)
Mass Rate Balance(Steady-State Form)
►Steady-state: all properties are unchanging in time.
►For steady-state control volume, dmcv/dt = 0.
e
eii mm
(Eq. 4.6)
(mass rate in) (mass rate out)
![Page 8: Chapter 4 Control Volume Analysis Using Energy. Learning Outcomes ►Demonstrate understanding of key concepts related to control volume analysis including.](https://reader036.fdocuments.us/reader036/viewer/2022081519/56649e665503460f94b60e36/html5/thumbnails/8.jpg)
Energy Rate Balance
)2
V()
2
V(
22cv
ee
eeii
ii gzumgzumWQdt
dE (Eq. 4.9)
time rate of change of the energy
contained within the control volume
at time t
net rate at whichenergy is beingtransferred in
by heat transferat time t
net rate at whichenergy is beingtransferred out
by work attime t
net rate of energytransfer into thecontrol volumeaccompanying
mass flow
![Page 9: Chapter 4 Control Volume Analysis Using Energy. Learning Outcomes ►Demonstrate understanding of key concepts related to control volume analysis including.](https://reader036.fdocuments.us/reader036/viewer/2022081519/56649e665503460f94b60e36/html5/thumbnails/9.jpg)
Evaluating Work for a Control Volume
)()(cv iiieee vpmvpmWW (Eq. 4.12)
The expression for work is
cvW accounts for work associated with rotating shafts, displacement of the boundary, and electrical effects.
where►
)( eee vpm is the flow work at exit e.►
)( iii vpm is the flow work at inlet i.►
![Page 10: Chapter 4 Control Volume Analysis Using Energy. Learning Outcomes ►Demonstrate understanding of key concepts related to control volume analysis including.](https://reader036.fdocuments.us/reader036/viewer/2022081519/56649e665503460f94b60e36/html5/thumbnails/10.jpg)
)2
V()
2
V(
22
cvcvcv
ee
eeeeii
iiii gzvpumgzvpumWQdt
dE
(Eq. 4.13)
Control Volume Energy Rate Balance(One-Dimensional Flow Form)
For convenience substitute enthalpy, h = u + pv
)2
V()
2
V(
22
cvcvcv
ee
eeii
ii gzhmgzhmWQdt
dE
(Eq. 4.14)
Using Eq. 4.12 in Eq. 4.9
![Page 11: Chapter 4 Control Volume Analysis Using Energy. Learning Outcomes ►Demonstrate understanding of key concepts related to control volume analysis including.](https://reader036.fdocuments.us/reader036/viewer/2022081519/56649e665503460f94b60e36/html5/thumbnails/11.jpg)
Control Volume Energy Rate Balance(One-Dimensional Flow Form)
e
ee
eei
ii
ii gzhmgzhmWQdt
dE)
2
V()
2
V(
22
cvcvcv
(Eq. 4.15)
Eq. 4.15 is the accounting balance for the energy of the control volume.
In practice there may be several locations on the boundary through which mass enters or exits. Multiple inlets and exits are accounted for by introducing summations:
![Page 12: Chapter 4 Control Volume Analysis Using Energy. Learning Outcomes ►Demonstrate understanding of key concepts related to control volume analysis including.](https://reader036.fdocuments.us/reader036/viewer/2022081519/56649e665503460f94b60e36/html5/thumbnails/12.jpg)
Control Volume Energy Rate Balance(Steady-State Form)
e
ee
eei
ii
ii gzhmgzhmWQ )2
V()
2
V(0
22
cvcv
(Eq. 4.18)
►Steady-state: all properties are unchanging in time.
►For steady-state control volume, dEcv/dt = 0.
![Page 13: Chapter 4 Control Volume Analysis Using Energy. Learning Outcomes ►Demonstrate understanding of key concepts related to control volume analysis including.](https://reader036.fdocuments.us/reader036/viewer/2022081519/56649e665503460f94b60e36/html5/thumbnails/13.jpg)
►Many important applications involve one-inlet, one-exit control volumes at steady state.
►The mass rate balance reduces to .
Control Volume Energy Rate Balance(Steady-State Form, One-Inlet, One-Exit)
mmm 21
)(
2
)V(V)(0 21
22
21
21cvcv zzghhmWQ Eq.4.20a
or dividing by mass flow rate
)(2
)V(V)(0 21
22
21
21cvcv zzghhm
W
m
Q
Eq.4.20b
![Page 14: Chapter 4 Control Volume Analysis Using Energy. Learning Outcomes ►Demonstrate understanding of key concepts related to control volume analysis including.](https://reader036.fdocuments.us/reader036/viewer/2022081519/56649e665503460f94b60e36/html5/thumbnails/14.jpg)
Nozzles and Diffusers
►Nozzle: a flow passage of varying cross-sectional area in which the velocity of a gas or liquid increases in the direction of flow.
►Diffuser: a flow passage of varying cross-sectional area in which the velocity of a gas or liquid decreases in the direction of flow.
![Page 15: Chapter 4 Control Volume Analysis Using Energy. Learning Outcomes ►Demonstrate understanding of key concepts related to control volume analysis including.](https://reader036.fdocuments.us/reader036/viewer/2022081519/56649e665503460f94b60e36/html5/thumbnails/15.jpg)
►If the change in potential energy from inlet to exit is negligible, g(z1 – z2) drops out.
►If the heat transfer with surroundings is negligible, drops out.
)(
2
)V(V)(0 21
22
21
21cvcv zzghhmWQ Eq.4.20a
Nozzle and Diffuser Modeling
.0cv W
2
VV)(0
22
21
21 hh (Eq. 4.21)
cvQ
►
![Page 16: Chapter 4 Control Volume Analysis Using Energy. Learning Outcomes ►Demonstrate understanding of key concepts related to control volume analysis including.](https://reader036.fdocuments.us/reader036/viewer/2022081519/56649e665503460f94b60e36/html5/thumbnails/16.jpg)
Turbines
►Turbine: a device in which power is developed as a result of a gas or liquid passing through a set of blades attached to a shaft free to rotate.
![Page 17: Chapter 4 Control Volume Analysis Using Energy. Learning Outcomes ►Demonstrate understanding of key concepts related to control volume analysis including.](https://reader036.fdocuments.us/reader036/viewer/2022081519/56649e665503460f94b60e36/html5/thumbnails/17.jpg)
)(
2
)V(V)(0 21
22
21
21cvcv zzghhmWQ Eq.4.20a
Turbine Modeling
►If the change in kinetic energy of flowing matter is negligible, ½(V12 – V2
2) drops out.
►If the change in potential energy of flowing matter is negligible, g(z1 – z2) drops out.
►If the heat transfer with surroundings is negligible, drops out.
)( 21cv hhmW cvQ
![Page 18: Chapter 4 Control Volume Analysis Using Energy. Learning Outcomes ►Demonstrate understanding of key concepts related to control volume analysis including.](https://reader036.fdocuments.us/reader036/viewer/2022081519/56649e665503460f94b60e36/html5/thumbnails/18.jpg)
Compressors and Pumps
►Compressors and Pumps: devices in which work is done on the substance flowing through them to change the state of the substance, typically to increase the pressure and/or elevation.
►Compressor : substance is gas ►Pump: substance is liquid
![Page 19: Chapter 4 Control Volume Analysis Using Energy. Learning Outcomes ►Demonstrate understanding of key concepts related to control volume analysis including.](https://reader036.fdocuments.us/reader036/viewer/2022081519/56649e665503460f94b60e36/html5/thumbnails/19.jpg)
)(
2
)V(V)(0 21
22
21
21cvcv zzghhmWQ Eq.4.20a
Compressor and Pump Modeling
)( 21cv hhmW
►If the change in kinetic energy of flowing matter is negligible, ½(V12 – V2
2) drops out.
►If the change in potential energy of flowing matter is negligible, g(z1 – z2) drops out.
►If the heat transfer with surroundings is negligible, drops out.
cvQ
![Page 20: Chapter 4 Control Volume Analysis Using Energy. Learning Outcomes ►Demonstrate understanding of key concepts related to control volume analysis including.](https://reader036.fdocuments.us/reader036/viewer/2022081519/56649e665503460f94b60e36/html5/thumbnails/20.jpg)
Heat Exchangers
►Direct contact: A mixing chamber in which hot and cold streams are mixed directly.
►Tube-within-a-tube counterflow: A gas or liquid stream is separated from another gas or liquid by a wall through which energy is conducted. Heat transfer occurs from the hot stream to the cold stream as the streams flow in opposite directions.
![Page 21: Chapter 4 Control Volume Analysis Using Energy. Learning Outcomes ►Demonstrate understanding of key concepts related to control volume analysis including.](https://reader036.fdocuments.us/reader036/viewer/2022081519/56649e665503460f94b60e36/html5/thumbnails/21.jpg)
►If the kinetic energies of the flowing streams are negligible, (Vi2/2) and (Ve
2/2) drop out.
►If the potential energies of the flowing streams are negligible, gzi and gze drop out.
►If the heat transfer with surroundings is negligible, drops out.
e
ee
eei
ii
ii gzhmgzhmWQ )2
V()
2
V(0
22
cvcv
(Eq. 4.18)
Heat Exchanger Modeling
cvQ
.0cv W
ee
eiii hmhm 0
im em
im em
►
![Page 22: Chapter 4 Control Volume Analysis Using Energy. Learning Outcomes ►Demonstrate understanding of key concepts related to control volume analysis including.](https://reader036.fdocuments.us/reader036/viewer/2022081519/56649e665503460f94b60e36/html5/thumbnails/22.jpg)
Throttling Devices
►Throttling Device: a device that achieves a significant reduction in pressure by introducing a restriction into a line through which a gas or liquid flows. Means to introduce the restriction include a partially opened valve or a porous plug.
![Page 23: Chapter 4 Control Volume Analysis Using Energy. Learning Outcomes ►Demonstrate understanding of key concepts related to control volume analysis including.](https://reader036.fdocuments.us/reader036/viewer/2022081519/56649e665503460f94b60e36/html5/thumbnails/23.jpg)
►If the change in kinetic energy of flowing matter upstream and downstream of the restriction is negligible, ½(V1
2 – V22) drops out.
►If the change in potential energy of flowing matter is negligible, g(z1 – z2) drops out.
►If the heat transfer with surroundings is negligible, drops out.
)(
2
)V(V)(0 21
22
21
21cvcv zzghhmWQ Eq.4.20a
Throttling Device Modeling
cvQ
.0cv W
12 hh (Eq. 4.22)
►
![Page 24: Chapter 4 Control Volume Analysis Using Energy. Learning Outcomes ►Demonstrate understanding of key concepts related to control volume analysis including.](https://reader036.fdocuments.us/reader036/viewer/2022081519/56649e665503460f94b60e36/html5/thumbnails/24.jpg)
►Engineers creatively combine components to achieve some overall objective, subject to constraints such as minimum total cost. This engineering activity is called system integration.
System Integration
►The simple vapor power plant of Fig 4.16 provides an illustration.
![Page 25: Chapter 4 Control Volume Analysis Using Energy. Learning Outcomes ►Demonstrate understanding of key concepts related to control volume analysis including.](https://reader036.fdocuments.us/reader036/viewer/2022081519/56649e665503460f94b60e36/html5/thumbnails/25.jpg)
The Mass Balance (Transient Analysis)
►Transient: state changes with time.►Integrate mass rate balance (Eq. 4.2) from time
0 to a final time t.
t
e
e
t
i
i
tdtmdtmdt
dt
dm
000
cv
(Eq. 4.23)e
eii mmmtm )0()( cvcvThis becomes
where
•mi is amount of mass entering the control volume through inlet i, from time 0 to t.•me is amount of mass exiting the control volume through exit e, from time 0 to t.
![Page 26: Chapter 4 Control Volume Analysis Using Energy. Learning Outcomes ►Demonstrate understanding of key concepts related to control volume analysis including.](https://reader036.fdocuments.us/reader036/viewer/2022081519/56649e665503460f94b60e36/html5/thumbnails/26.jpg)
The Energy Balance (Transient Analysis)
►Integrate energy rate balance (Eq. 4.15), ignoring the effects of kinetic and potential energy, from time 0 to a final time t.
(Eq. 4.25)ee
ei
ii hmhmWQUtU cvcvcvcv )0()(
t
e
ee
t
i
ii
tttdthmdthmdtWdtQdt
dt
dU
000cv
0cv
0
cv
When the specific enthalpies at inlets and exits are constant with time, this becomes