“Acids, Bases, and Salts”. Acids-Bases n OBJECTIVES: –Define the properties of acids and bases.
Chapter 19 Acids, Bases, and Salts Anything in black letters = write it in your notes (‘knowts’)...
-
Upload
jasper-claude-bryant -
Category
Documents
-
view
221 -
download
3
Transcript of Chapter 19 Acids, Bases, and Salts Anything in black letters = write it in your notes (‘knowts’)...
Chapter 19Chapter 19
Acids, Bases, and SaltsAcids, Bases, and Salts
Anything in black letters = write it in your notes (‘knowts’)
UNIT 6 – Acids & Bases & Redox RxnsUNIT 6 – Acids & Bases & Redox Rxns
Chapter 19 – Acids, Bases, and SaltsChapter 19 – Acids, Bases, and SaltsChapter 20 – Oxidation-Reduction RxnsChapter 20 – Oxidation-Reduction Rxns
19.1 – Acid-Base Theories19.1 – Acid-Base Theories
Taste sourDissolve active metals to produce hydrogen gas
Turns litmus paper RED
BasesTaste bitterFeels slippery on skin (dissolves oils on skin)
Turns litmus paper BLUE
Have you seen the litmus paper yet??
Acids
These are experimental definitions, they do not explain (theory) how an acid is different from a base.
Svante Arrhenius (1857 – 1927)
Arrhenius defined an acid and base theoretically.
Dissociate - to split or separate from another
First, a vocal word…
ACID – substance that dissociates in water to form hydrogen ions (H+).
BASE – substance that dissociates in water to form hydroxide ions (OH-).
HCl (aq) H+ (aq) + Cl- (aq)
NaOH (aq) Na+ (aq) + OH- (aq)
Arrhenius Definition (~1887)
When an acid is placed in water, H+ ions are produced.
Hydrogen ions can also be thought of as H3O+ ions.
H3O+ = hydronium ion
HCl (aq) H+ (aq) + Cl- (aq)
HCl + H2O H3O+ + Cl-
or equivalently,
Brønsted-Lowry Definition (~1923)
ACID – donates H+
BASE – accepts H+
B-L definition covers more examples than the Arrhenius definition.
Johannes Bronstad (1879 – 1947)
Thomas Lowry (1874 – 1936)
ammonia ammonium ion
water donates a H+ and so is a B-L acid
ammonia accepts a H+ and so is a B-L base
Conjugate Acid – formed when a base accepts a H+
Conjugate Base – formed when an acid donates a H+
Amphoteric – substance that can be an acid or a base – depending on what it reacts with.
Water is amphoteric
ACIDS donate H+, BASES accept H+
label each reactant as an acid and base, label the products as conjugate acids or conjugate bases.
HNO3 + H2O H3O+ + NO3-
CH3COOH + H2O H3O+ + CH3COO-
NH3 + H2O NH4+ + OH-
H2O + CH3COO- CH3COOH + OH-
Lewis Acids and Bases (not covered)
Assignment:
Chapter 19 #52-57 (p. 684)
Acid/Base Indicators
Litmus
Acid – red, Base – blue, Neutral - colorless
Phenolphthalein
Acid – colorless, Base – pink, Neutral - colorless
Cabbage
Acid – red/pink, Base – yellow/green, Neutral – blue/purple
19.2 – Hydrogen Ions and Acidity19.2 – Hydrogen Ions and Acidity
Molarity (M) – unit used to express the concentration of a solution
Molarity = mol solute (mol)
liters of soln (L)
[H+] = ‘the hydrogen ion concentration’
anything in [brackets] means the concentration in molarity
[OH-] = ‘the hydroxide ion concentration’
Self-Ionization of WaterSelf-Ionization of Water
Water ionizes to produce a small amount of H+ and OH- ions.
H2O H+ + OH-
[H+] = [OH-] = 1 x 10-
7 M
In pure water at 25 ̊C
Ion-product constant for water (Kw)
Kw = [H+][OH-] = 1.0 x 10-14
remember…anything in [brackets] represents the concentration in molarity
A solution is acidic if [H+] > 1.0 x 10-7 M …or if the pH of the solution is below 7
pH = ‘power of the hydrogen ion’pH = -log[H+]
Just as the mole was used to simplify large numbers of atoms, pH is used to simplify small concentration
numbers
[H+] = 1 x 10-7 M
Instead of writing out numbers like these…
[H+] = 2.4 x 10-4 M
[H+] = 7.3 x 10-10 M
pH = 7.00pH = 3.62pH = 9.14
we can write number like these
We can just say “This solution has a pH of 3.62”.
Instead of saying “This solution has a hydronium ion concentration of 2.4 x 10-4 M”.
Not only is pH an easier number to talk about, pH is understood by most people, whereas molarity is not.
The pH scale is used to describe how acidic or basic (alkaline) a substance is.
Pure water has [H+] = 1.00 x 10-
7 M
pH = - log [1.00 x 10-7]
pH = 7
The pH of water would be
pH = -log[H+]
Examples
Examples
[H+] = 2.3 x 10-5 M. Calculate the pH.
pH = - log [H+]
pH = - log [2.3 x 10-5]
pH = 4.64
Examples
[H+] = 1.0 x 10-5 M. Calculate the pH.
pH = - log [H+]
pH = - log [1.0 x 10-5]
pH = 5.0
Examples
-4.2 = log [H+]
10-4.2 = 6.31 x 10-5 M = [H+]
pH = - log [H+]
10-4.2 = 10log [H+]
pH = 4.2. Calculate [H+]
Summary of pHSummary of pH
[H+] = 10-pH
pH = - log [H+]
The pH scale is used to indicate how acidic or basic a substance is.
The scale normally ranges from 0 to 14.
Acids have a pH below 7, bases are above 7.
ASSIGNMENT:
Chapter 19 #10-24 (p.655-662)
19.3 – Strengths of Acids and Bases19.3 – Strengths of Acids and Bases
Coming soon!!
19.4 – Neutralization Reactions19.4 – Neutralization Reactions
Neutralization Rxn – complete rxn of a strong base with a strong acid
A neutralization rxn will produce a salt and water.
Acid + Base Salt + H2O
HCl + NaOH NaCl + H2O
Titration – determining the concentration of an unknown solution using a solution whose concentration is known.
Equivalence Point – point where the amount of acid equals the amount of base
Standard – solution of known concentration.
End Point – point where the indicator changes color
EXAMPLE10.0 mL of 0.5 M HCl solution is added to 20.0 mL of NaOH of unknown concentration. What is the concentration of the NaOH?
HCl + NaOH NaCl + H2O0.5 M
10.0 mL 20.0 mLx M
Since the reaction of HCl and NaOH is 1:1 and twice the volume of NaOH was used, the NaOH must half as strong as HCl; [0.25 M].
EXAMPLEWhat volume of 0.10 M KOH is required to neutralize 20.0 mL of 0.20 M H2SO4 solution?
H2SO4 + 2KOH K2SO4 + 2H2O
0.20 M20.0 mL x mL
0.10 M
Always adjust if the rxn is NOT 1:1
Since KOH requires twice as many moles as H2SO4, you should double your answer.
19.5 – Salts in Solution19.5 – Salts in Solution
not covered…
Neutralization Rxn –
Acid + Base Salt + H2O
HCl + NaOH NaCl + H2O
Sulfuric acid + magnesium hydroxide
Write the balanced chemical equation for each neutralization reaction
Phosphoric acid + calcium hydroxide
Nitric acid + ammonium hydroxide
Chapter 19 Quiz Questions
1. What color will litmus paper be in an acidic solution?
3. Define an acid in terms of the Arrhenius definition.
4. What two products are always formed in an acid-base neutralization reaction?
2. What color will phenolphthalein indicator be in an basic solution?
5. A student titrated 10.0 mL of an HCl solution. The titration required 23.3 mL of 0.24M NaOH solution.
a. Which solution was the standard?
b. Which solution was more concentrated?
c. Convert the volumes to liters
d. Calculate the number of moles of NaOH that reacted.
e. Calculate the number of moles of HCl that reacted.
f. Calculate the molarity of the HCl solution.
6. Calculate the pH of solutions with the following hydrogen ion concentrations.
a. [H+] = 1.23 x 10-4M
b. [H+] = 3.42 x 10-7M
7. Calculate the hydrogen ion concentrations of solutions with the given pH.
a. pH = 3.14
b. pH = 9.2