Chapter 11 Statistical Thinking and Applications MANAGING FOR QUALITY AND PERFORMANCE EXCELLENCE,...
-
Upload
antony-cole -
Category
Documents
-
view
228 -
download
2
Transcript of Chapter 11 Statistical Thinking and Applications MANAGING FOR QUALITY AND PERFORMANCE EXCELLENCE,...
Chapter 11Chapter 11
StatisticalThinking andApplications
MANAGING FOR QUALITY AND PERFORMANCE EXCELLENCE, 7e, © 2008
Thomson Higher Education Publishing1
Key Idea
MANAGING FOR QUALITY AND PERFORMANCE EXCELLENCE, 7e, © 2008
Thomson Higher Education Publishing2
Raw data collected from the field do not provide the information necessary for quality control or improvement. Data must be organized, analyzed, and interpreted. Statistics provide an efficient and effective way of obtaining meaningful information from data, allowing managers and workers to control and improve processes.
Statistical Thinking
• All work occurs in a system of interconnected processes
• Variation exists in all processes• Understanding and reducing variation are the
keys to success
MANAGING FOR QUALITY AND PERFORMANCE EXCELLENCE, 7e, © 2008
Thomson Higher Education Publishing3
Sources of Variation in Production Processes
MANAGING FOR QUALITY AND PERFORMANCE EXCELLENCE, 7e, © 2008
Thomson Higher Education Publishing4
Materials
Tools
Operators Methods Measurement Instruments
HumanInspectionPerformance
EnvironmentMachines
INPUTS PROCESS OUTPUTS
Variation
• Many sources of uncontrollable variation exist (common causes)
• Special (assignable) causes of variation can be recognized and controlled
• Failure to understand these differences can increase variation in a system
MANAGING FOR QUALITY AND PERFORMANCE EXCELLENCE, 7e, © 2008
Thomson Higher Education Publishing5
Key Idea
MANAGING FOR QUALITY AND PERFORMANCE EXCELLENCE, 7e, © 2008
Thomson Higher Education Publishing6
A system governed only by common causes is called a stable system. Understanding a stable system and the differences between special and common causes of variation is essential for managing any system.
Problems Created by Variation
• Variation increases unpredictability. • Variation reduces capacity utilization. • Variation contributes to a “bullwhip” effect. • Variation makes it difficult to find root causes. • Variation makes it difficult to detect potential
problems early.
MANAGING FOR QUALITY AND PERFORMANCE EXCELLENCE, 7e, © 2008
Thomson Higher Education Publishing7
Importance of Understanding Variation
MANAGING FOR QUALITY AND PERFORMANCE EXCELLENCE, 7e, © 2008
Thomson Higher Education Publishing8
time
PREDICTABLE
?UNPREDECTIBLE
Two Fundamental Management Mistakes
1. Treating as a special cause any fault, complaint, mistake, breakdown, accident or shortage when it actually is due to common causes
2. Attributing to common causes any fault, complaint, mistake, breakdown, accident or shortage when it actually is due to a special cause
MANAGING FOR QUALITY AND PERFORMANCE EXCELLENCE, 7e, © 2008
Thomson Higher Education Publishing9
Note to Instructors
• The following slides can be used to guide a class demonstration and discussion of the Deming Red Bead experiment using small bags of M&Ms, from a suggestion I found on a TQ newsgroup several years ago. The good output (“red beads”) are the blue M&Ms, with the instructor playing the role of Dr. Deming.
MANAGING FOR QUALITY AND PERFORMANCE EXCELLENCE, 7e, © 2008
Thomson Higher Education Publishing10
MANAGING FOR QUALITY AND PERFORMANCE EXCELLENCE, 7e, © 2008
Thomson Higher Education Publishing11
We’re Going into Business!!!
We have a new global customer and have to start up several factories. So I need teams of 5 to do the work:
1 Production worker2 Inspectors1 Chief inspector1 Recorder
Production Setup
MANAGING FOR QUALITY AND PERFORMANCE EXCELLENCE, 7e, © 2008
Thomson Higher Education Publishing12
1. Take the bag in your left hand.
2. Tear a 3/4” opening in the right corner. (only large enough for one piece at a time)
Production Process
MANAGING FOR QUALITY AND PERFORMANCE EXCELLENCE, 7e, © 2008
Thomson Higher Education Publishing13
1. Production worker produces 10 pieces and places them on the napkin.2. Each inspector, independently, counts the blue ones, and passes to the Chief Inspector to verify.3. If Chief Inspector agrees, s/he tellsthe recorder, who reports it to me.
MANAGING FOR QUALITY AND PERFORMANCE EXCELLENCE, 7e, © 2008
Thomson Higher Education Publishing14
Do it right the first time!
Be a Quality Worker!
Take Pride inYour Work!
Lessons Learned
• Quality is made at the top.• Rigid procedures are not enough.• People are not always the main source of
variability.• Numerical goals are often meaningless.• Inspection is expensive and does not
improve quality.
MANAGING FOR QUALITY AND PERFORMANCE EXCELLENCE, 7e, © 2008
Thomson Higher Education Publishing15
Statistical Foundations
• Random variables• Probability distributions• Populations and samples• Point estimates• Sampling distributions • Standard error of the mean
MANAGING FOR QUALITY AND PERFORMANCE EXCELLENCE, 7e, © 2008
Thomson Higher Education Publishing16
Important Probability Distributions
• Discrete– Binomial– Poisson
• Continuous– Normal– Exponential
MANAGING FOR QUALITY AND PERFORMANCE EXCELLENCE, 7e, © 2008
Thomson Higher Education Publishing17
Central Limit Theorem• If simple random samples of size n are taken from
any population, the probability distribution of sample means will be approximately normal as n becomes large.
MANAGING FOR QUALITY AND PERFORMANCE EXCELLENCE, 7e, © 2008
Thomson Higher Education Publishing18
Sampling Methods
• Simple random sampling• Stratified sampling• Systematic sampling• Cluster sampling• Judgment sampling
MANAGING FOR QUALITY AND PERFORMANCE EXCELLENCE, 7e, © 2008
Thomson Higher Education Publishing19
Key Idea
MANAGING FOR QUALITY AND PERFORMANCE EXCELLENCE, 7e, © 2008
Thomson Higher Education Publishing20
A good sampling plan should select a sample at the lowest cost that will provide the best possible representation of the population, consistent with the objectives of precision and reliability that have been determined for the study.
Sampling Error
• Sampling error (statistical error)• Nonsampling error (systematic error)• Factors to consider:
– Sample size– Appropriate sample design
MANAGING FOR QUALITY AND PERFORMANCE EXCELLENCE, 7e, © 2008
Thomson Higher Education Publishing21
Statistical Methods
• Descriptive statistics• Statistical inference• Predictive statistics
MANAGING FOR QUALITY AND PERFORMANCE EXCELLENCE, 7e, © 2008
Thomson Higher Education Publishing22
Statistical Tools
MANAGING FOR QUALITY AND PERFORMANCE EXCELLENCE, 7e, © 2008
Thomson Higher Education Publishing23
Excel Tools for Statistics
• Tools…Data Analysis… Descriptive Statistics
• Tools…Data Analysis…Histogram
MANAGING FOR QUALITY AND PERFORMANCE EXCELLENCE, 7e, © 2008
Thomson Higher Education Publishing24
Key Idea
MANAGING FOR QUALITY AND PERFORMANCE EXCELLENCE, 7e, © 2008
Thomson Higher Education Publishing25
One of the biggest mistakes that people make in using statistical methods is confusing data that are sampled from a static population (cross-sectional data) with data sampled from a dynamic process (time series data).
Enumerative and Analytic Studies
• Enumerative study – analysis of a static population
• Analytic study – analysis of a dynamic time series
MANAGING FOR QUALITY AND PERFORMANCE EXCELLENCE, 7e, © 2008
Thomson Higher Education Publishing26
Design of Experiments
• A designed experiment is a test or series of tests that enables the experimenter to compare two or more methods to determine which is better, or determine levels of controllable factors to optimize the yield of a process or minimize the variability of a response variable.
• DOE is an increasingly important tool for Six Sigma.
MANAGING FOR QUALITY AND PERFORMANCE EXCELLENCE, 7e, © 2008
Thomson Higher Education Publishing27