CCT DIMMING

www.szjiangjing.com

Applications: Offices / Classrooms / Malls / Hotel / Lobbies / Back of house / Restaurants / Bus Stations / Medical Facility

Change the lighting mode according to your mood!CCT ,Brightness Adjustable LED Panel Lights .

3000K

5000K

SPECIFICATION

www.szjiangjing.com

Technical Speci�cation

603mm

558mm

603mm

558mm

1213mm

1168mm

603mm

558mm

1213mm

1168mm

301mm

255m

m

Working Life-span: 50,000H

Material: Aluminum+ High Quality LGPWorking Temperature: -20℃～+45℃Storage Temperature: -25℃～+65℃

THD: ≤ 15 %PF:＞0.95 Non-flicker Power Efficiency: ＞90 %Beam Angle: 120°

IP Grade:IP40

Input Voltage: AC100V～277V 50Hz～60Hz603mm * 603mm (2 * 2 ft)

603mm * 1213mm (2 * 4 ft)

301mm * 1213mm (1 * 4 ft)

Features & Benefits:

UL/cUL with isolated external power supply

0-10V dimmable and 2.4G Wireless & CCT dimmable LED Flat Panel

LED Source: SMD2835, CRI>80, LM80 report

No need any wire connections

High Quality LGP, imported from Taiwan, Anti-Yellow

CCT adjustable from 3000K-3500K-4000K-5000K

5 years warranty

PARAMETER

www.szjiangjing.com

PLR-36W-66-28-TG-07

Standard LED Panel Light Series

Premium LED Panel Light Series

PLR-40W-66-28-TG-07

Watt

36W

100-110 lm/W SMD 2835AC 100-277V

2 * 2 ft 3.28 kg/pc

3.77 kg/pc

40W

PLR-45W-66-28-TG-07

PLR-40W-123-28-TG-07

PLR-45W-123-28-TG-07

PLR-50W-126-28-TG-13

PLR-60W-126-28-TG-13

45W

40W

45W1 * 4 ft

2 * 4 ft6.3 kg/pc

50W

60W

CCT N.WModel Input Voltage Lumens LEDs Size(mm)

3000K-5000K

PLR-35W-66-28-TG-01

PLR-40W-66-28-TG-07

Watt

36W

125-130 lm/W SMD 2835AC 100-277V

2 * 2 ft 3.28 kg/pc

3.77 kg/pc

40W

PLR-40W-123-28-TG-07

PLR-40W-126-28-TG-01

PLR-50W-126-28-TG-01

45W

40W

45W

1 * 4 ft

2 * 4 ft 6.3 kg/pc

CCT N.WModel Input Voltage Lumens LEDs Size(mm)

3000K-5000K

ITEM CODE WATTS (W) LUMENS (LM) CCT(K) EFFICACY (LM / W) VOLTAGE(V)

1’ X 4’

PLB-S1-40W-120 40 4080 3000-5000 102 120-277

2’ X 2’PLB-S2-40W-120 40 4080 3000-5000 102 120-277

2’ X 4’PLB-S3-50W-120 50 5250 3000-5000 105 120-277

CCT ADJUSTABLE

www.szjiangjing.com

3000K

CCT can be adjusted between 3000K-5000K as you wish .

3500K 4000K 5000K

3000K

5000K

BRIGHTNESS ADJUSTABLE

www.szjiangjing.com

Brightness Dimming:Step DimmingContinuous Dimming2

1

DELAY TURN-OFF

www.szjiangjing.com

After 10 Seconds of each operation, it will enter the standby power saving mode. If you need to adjust again, please pressthe ON button,indicator light flashes is OK.

Dear, You forgot to turn off the lights

GROUPING CONTROL

www.szjiangjing.com

A remote-controller maximum can control 4 groups of lamps , but the numbers of lamps of each group is unlimited

01

02

03

04

LED LIGHT SOURCE

www.szjiangjing.com

SMD 2835 5000K

SMD 2835 3000K

LED CHIPS

The circuit board use special single PCB but double leds, color temperature can be adjusted from 3000K to 5000k, no glare and non-flicker, which offer nature vision experience for you all day.

REMOTE CONTROLLER

www.szjiangjing.com

THE HANDHELD REMOTE CONTROLLER

Matching code for light

Group selecting button

Delay turn-off

Long pressing the ‘ID’ button will keep the controller’s indicator on, then turnon the light and release the ‘ID’ buttonafter the light flashes, matching code complete. Matching code for several lights simultaneously is available.

5000K 3500K4000K

25% brightness

Increase brightness Decrease color temperature Increase color temperatureDecrease brightness

50% brightness 75% brightness 100% brightness

3000K

All Groups are selected

* After turned on, the light will automatically detect the 0-10v dimmer setting to determine the brightness. It will default to 100% brightness if there is no dimmer input.

* If the dimmer is used, the light brightness will convert to 0-10v dimmer’s current brightness setting.

* If the remote controller is used, the light brightness will only change from its current brightness.

Turn on Turn off

After selecting the color temperature, press the button “OFF” then turn on the light to save the color temperature.Color temperature selecting/saving

Release the code and disconnect light from remote controllerPress the botton together, then turn on the light, the light will flash to finish releasing the code on the lights.

+

Grouping lights (matching code process needs to be completed first). Turn off the lights, continue pressing the group selection button for 3s, then turn on the lights, the lights will flash to finish grouping.

Press the button, the delay function will begin after the light flashes once. The light will be turned off after 10s. Pressing the ‘ON’ button will cancel the delay function.

WALL SWITCH

www.szjiangjing.com

THE WALL TYPE REMOTE CONTROLLER

The matching method of hand-hold remote controller and wall-type remote controller, the wall controller can copy some of the functions of the hand-hold controller by the following method.

1

2

3

4

NO Grouping Hand-hold controller Wall-type controller

5

1

2

3

4

ALL

1 + ID

2 + ID

3 + ID

4 + ID

ALL + ID

ON+CCT

ON+CCT

ON+CCT

ON+CCT

ON+CCT

A

Turn on

Brightness adjustment

Pressing the ‘ON + OFF’ buttons simultaneously will keep the remote controller’s indicator on, turn on the light and release the buttons after the light has been on for 2s completing the matching process. Matching code for several lights together is available.

Press the ‘CCT’ button, the color temperature will cycle between 3000k/3500k/4000k/5000k.After shutting down/turning off the currentcolor temperature will be saved.

Turn off

A

* After 10 Seconds of each operation, it will enter the standby power saving mode. If you need to adjust again, please press the ON button,it works after the indicator flashes.

Light code combination matching button

If you need to use both hand-hold controller and wall controller for the same light, please don't use this function, directly use thefollowing copy function.

WIRE CONNECTION

www.szjiangjing.com

Wiring of panel light with 0-10V dimmable driverWire Connection

-+ Dim-Dim+ Dim-Dim+0-10v

DIMMER Panel light Panel light

Lout NinLin N GroundL N GroundL

X panel

Dim-Dim+

Panel light

N GroundLDim-Dim+

Panel light

N GroundL Dim-Dim+

Panel light

N GroundL

X panel

PACKAGE

www.szjiangjing.com

Item

2 x 2 FT 3.28kg/pc 625x625x70 2pcs/CTN 8.0kg/CTN 1836

904

1672

3672

1908

3496

14.1kg/CTN

9.0kg/CTN

2pcs/CTN

2pcs/CTN

1235x625x70

1235x325x70

6.3kg/pc

3.77kg/pc

2 x4 FT

1 x4 FT

N.W.Carton

Size(mm) Qty G.W. Quantity loaded by20 GP container

Quantity loaded by40 GP container

Quantity loaded by40 HQ container

4320

2280

4182

INSTALLATION

www.szjiangjing.com

1.Remove ceiling plaster slab

Ceiling recessing

Suspending

surface mounted

1. A.Fix the anchor into target place on the ceiling.

1.take both profile A and B from accessory pack.

4.Slide panel into frame properly. 5.Fix the last plece of aluminnum profile with screw after panel is well placed.

2.Assembling 3 pleces aluminum profiletogether with screw.

3.Fix semi-finished frame onto ceiling with screw(Plastic anchor for concrete ceilingonly).

B.Fix the installation mount on the ceiling with plastic anchor.

2.Hang the panel to ceiling suspendinginstallation kits

3. Adjust the length of steel wire.Connect the power supply

2. Connect power supply 3. Fix the panel light into right place 4.Stabilize the panel

x2B

A

x4