Challenger - WerkMaster€¦ · Runs wet or dry on concrete, stone ... The propane powered...
Transcript of Challenger - WerkMaster€¦ · Runs wet or dry on concrete, stone ... The propane powered...
WerkMaster Grinders and Sanders Inc. 6932 Greenwood Street, Burnaby, BC V5A 1X8tel: 604.629.8700 | toll free: 1.866.373.WERK | fax: 604.444.4231
www.werkmaster.com | email: [email protected]
The WerkMaster Challenger featuring the DuraShine System is a comprehensive floor care system from a versatile machine. A complete line of advanced diamond tooling specifically designed to create a durable shine on concrete and terrazzo floors.Runs wet or dry on concrete, stone, hardwood, terrazzo or VCT
tile. The propane powered WerkMaster Challenger machine runs as a light grinder, floor polisher and burnisher all in one significantly boosting productivity while producing superior, high gloss, floors.
The floating shroud provides unmatched performance on the waviest of floors. The shroud provides superior dust and slurry containment keeping the air quality safe and job site clean.
The WerkMaster Challenger machine has an on-board 8 gallon water system with adjustable feed for wet polishing work. The WerkMaster Challenger machine also has a passive vacuum system that captures dust particles in a disposable vacuum bag.
WerkMaster ChallengerFacility Maintenance Refinishing
SpecificationsSpecifications
Frame Powder Coated Precision Laser cut Steel
Engine 18hp commercial grade Kawasaki Engine
Fuel System Propane Fuel System provides ultra low emisisons, EPA, ARB, CGA, and CE certified
Ignition 12volt Electrical System w/ Key Start electric starter, safety fuse
Catalytic Muffler
Automotive Grade Three Way Catalytic Muffler produces ultra low emissions
Sound Level Less than 89 dba
Weight 300lbs (136kg)
Challenger
WerkMaster Grinders and Sanders Inc. 6932 Greenwood Street, Burnaby, BC V5A 1X8tel: 604.629.8700 | toll free: 1.866.373.WERK | fax: 604.444.4231
www.werkmaster.com | email: [email protected]
Features & Benefits
The QuickClick System securely affixes
tools to the WerkMaster DuraFlex Plates.
Place the two lock pins that are on each tool
into the two round holes at the end of each
spoke on the WerkMaster DuraFlex Plate.
Then slide it towards the edge of the
WerkMaster DuraFlex Plate until it click-
locks into place. To remove the tools, lightly
tap the outer edge with a rubber mallet to
unlock the spokes from the slots.
Automotive grade catalytic mufflers
reduce carbon monoxide emission
levels well below OSHA requirements
for indoor use.
DuraFlex Plate DriveWerkMaster DuraFlex Plate is engineered
to optimize the DuraShine System
performance. A big challenge in
floor care is working on an uneven
surface. WerkMaster DuraFlex
has a flexible head that keeps the
drive plate parallel to the floor
while each spring steel arm moves
up or down independently, staying
in constant contact with any uneven
floor. This greatly increases the efficiency
and effectiveness of the WerkMaster
DuraShine System.
QuickClick Tool System
Mist ‘N GoOnboard Water Tank and Spray
Misters allow you to quickly and
efficiently deliver the right amount of
water when wet polishing is required.