CGP SDL Grid profiles and Colors Catalog
-
Upload
custom-glass-products -
Category
Business
-
view
72 -
download
0
Transcript of CGP SDL Grid profiles and Colors Catalog
Windows & Door | Grids
Profiles and ColorsResidential / Commercial
SDL Profiles Decralite® CompositesAluminumWood
SDL Check Rail Profiles Decralite® CompositesAluminum
Decralite® SDL Colors
Note: Click the subject that interests you to go directly to that page.
Table of Contents
Custom Glass ProductsP.O. Box 2049 | 1475 Harrison Rd. | Salisbury, NC 28145
Phone: (704) 633.8444 | Fax: (704) 638.2666Email: [email protected]
Website: www.cgpglass.com
SPECIFICATION: AAMA/WDMA/CSA 101/I.S.2/A440-11, NAFS - North American Fenestration Standard/Specification for Windows, Doors, and Skylights
SDL ProfilesDecralite® SDL Grids
Custom Glass ProductsP.O. Box 2049 | 1475 Harrison Rd. | Salisbury, NC 28145
Phone: (704) 633.8444 | Fax: (704) 638.2666Email: [email protected]
Website: www.cgpglass.com
SPECIFICATION: AAMA/WDMA/CSA 101/I.S.2/A440-11, NAFS - North American Fenestration Standard/Specification for Windows, Doors, and Skylights
Decralite® SDL GridsFlat Profile
“A” Dimension “B” Dimension
040 5/8” 3/4” 7/8” 1” 1-1/8” 1-1/4”
070 5/8” 3/4” 7/8” 1” 1-1/8” 1-1/4”
093 5/8” 3/4” 7/8” 1” 1-1/8” 1-1/4”
1/8” 5/8” 3/4” 7/8” 1” 1-1/8” 1-1/4”
3/16” 5/8” 3/4” 7/8” 1” 1-1/8” 1-1/4”
1/4” 5/8” 3/4” 7/8” 1” 1-1/8” 1-1/4”
3/8” 5/8” 3/4” 7/8” 1” 1-1/8” 1-1/4”
» Lineal Bars available in all dimensions. » One-Piece configuration is available in all dimensions. » Coped-End configuration is available in all dimensions. » Cut-N-Notch configuration is available where highlighted in green.
B
A
Custom Glass ProductsP.O. Box 2049 | 1475 Harrison Rd. | Salisbury, NC 28145
Phone: (704) 633.8444 | Fax: (704) 638.2666Email: [email protected]
Website: www.cgpglass.com
SPECIFICATION: AAMA/WDMA/CSA 101/I.S.2/A440-11, NAFS - North American Fenestration Standard/Specification for Windows, Doors, and Skylights
Decralite® SDL GridsOG Profile
“A” Dimension “B” Dimension
SMOG SMOG
1/8” 5/8” 3/4” 7/8” 1” 1-1/8” 1-1/4”
3/16” 5/8” 3/4” 7/8” 1” 1-1/8” 1-1/4”
7/32” 5/8” 3/4” 7/8” 1” 1-1/8” 1-1/4”
1/4” 5/8” 3/4” 7/8” 1” 1-1/8” 1-1/4”
3/8” 5/8” 3/4” 7/8” 1” 1-1/8” 1-1/4”
» Lineal Bars available in all dimensions. » One-Piece configuration is available in all dimensions. » Coped-End configuration is available in all dimensions. » Cut-N-Notch configuration is available where highlighted in green.
BB
A A
SMOG
Custom Glass ProductsP.O. Box 2049 | 1475 Harrison Rd. | Salisbury, NC 28145
Phone: (704) 633.8444 | Fax: (704) 638.2666Email: [email protected]
Website: www.cgpglass.com
SPECIFICATION: AAMA/WDMA/CSA 101/I.S.2/A440-11, NAFS - North American Fenestration Standard/Specification for Windows, Doors, and Skylights
Decralite® SDL GridsPT Profile
“A” Dimension “B” Dimension
1/8” 3/4” 7/8” 1” 1-1/8” 1-1/4”
3/16” 3/4” 7/8” 1” 1-1/8” 1-1/4”
1/4” 3/4” 7/8” 1” 1-1/8” 1-1/4”
3/8” 3/4” 7/8” 1” 1-1/8” 1-1/4”
» Lineal Bars available in all dimensions. » One-Piece configuration is available in all dimensions. » Coped-End configuration is not presently available. » Cut-N-Notch configuration is available where highlighted in green.
B
A
Custom Glass ProductsP.O. Box 2049 | 1475 Harrison Rd. | Salisbury, NC 28145
Phone: (704) 633.8444 | Fax: (704) 638.2666Email: [email protected]
Website: www.cgpglass.com
SPECIFICATION: AAMA/WDMA/CSA 101/I.S.2/A440-11, NAFS - North American Fenestration Standard/Specification for Windows, Doors, and Skylights
Decralite® SDL GridsST Profile
“A” Dimension “B” Dimension
1/8” 3/4” 7/8” 1” 1-1/8” 1-1/4”
3/16” 3/4” 7/8” 1” 1-1/8” 1-1/4”
1/4” 3/4” 7/8” 1” 1-1/8” 1-1/4”
3/8” 3/4” 7/8” 1” 1-1/8” 1-1/4”
» Lineal Bars available in all dimensions. » One-Piece configuration is available in all dimensions. » Coped-End configuration is available only in 3/16” thickness (Dimension A) for all widths. » Cut-N-Notch configuration is available where highlighted in green.
B
A
Custom Glass ProductsP.O. Box 2049 | 1475 Harrison Rd. | Salisbury, NC 28145
Phone: (704) 633.8444 | Fax: (704) 638.2666Email: [email protected]
Website: www.cgpglass.com
SPECIFICATION: AAMA/WDMA/CSA 101/I.S.2/A440-11, NAFS - North American Fenestration Standard/Specification for Windows, Doors, and Skylights
Decralite® SDL GridsMG Profile
“A” Dimension “B” Dimension
1/4” 1” 1-1/8” 1-1/4”
» Lineal Bars available in all dimensions. » One-Piece configuration is available in all dimension. » Coped-End configuration is not presently available. » Cut-N-Notch configuration is available where highlighted in green.
B
A
Custom Glass ProductsP.O. Box 2049 | 1475 Harrison Rd. | Salisbury, NC 28145
Phone: (704) 633.8444 | Fax: (704) 638.2666Email: [email protected]
Website: www.cgpglass.com
SPECIFICATION: AAMA/WDMA/CSA 101/I.S.2/A440-11, NAFS - North American Fenestration Standard/Specification for Windows, Doors, and Skylights
Decralite® SDL GridsMI Profile
“A” Dimension “B” Dimension
1/8” 3/4” 7/8” 1” 1-1/8” 1-1/4”
3/16” 3/4” 7/8” 1” 1-1/8” 1-1/4”
1/4” 3/4” 7/8” 1” 1-1/8” 1-1/4”
3/8” 3/4” 7/8” 1” 1-1/8” 1-1/4”
» [1/4” Thickness Available] » Lineal Bars available in all dimensions. » One-Piece configuration is available in all dimensions. » Coped-End configuration is not presently available. » Cut-N-Notch configuration is available where highlighted in green.
30o
B
A
Custom Glass ProductsP.O. Box 2049 | 1475 Harrison Rd. | Salisbury, NC 28145
Phone: (704) 633.8444 | Fax: (704) 638.2666Email: [email protected]
Website: www.cgpglass.com
SPECIFICATION: AAMA/WDMA/CSA 101/I.S.2/A440-11, NAFS - North American Fenestration Standard/Specification for Windows, Doors, and Skylights
Decralite® SDL GridsKI Profile
“A” Dimension “B” Dimension
3/16” 3/4” 7/8” 1” 1-1/8” 1-1/4”
1/4” 3/4” 7/8” 1” 1-1/8” 1-1/4”
3/8” 3/4” 7/8” 1” 1-1/8” 1-1/4”
» Lineal Bars available in all dimensions. » One-Piece configuration is available in all dimensions. » Coped-End configuration is not presently available. » Cut-N-Notch configuration is available where highlighted in green.
60o
B
A
Custom Glass ProductsP.O. Box 2049 | 1475 Harrison Rd. | Salisbury, NC 28145
Phone: (704) 633.8444 | Fax: (704) 638.2666Email: [email protected]
Website: www.cgpglass.com
SPECIFICATION: AAMA/WDMA/CSA 101/I.S.2/A440-11, NAFS - North American Fenestration Standard/Specification for Windows, Doors, and Skylights
Decralite® SDL GridsEX Profile
“A” Dimension “B” Dimension
1/8” 3/4” 7/8” 1” 1-1/8” 1-1/4”
3/16” 3/4” 7/8” 1” 1-1/8” 1-1/4”
1/4” 3/4” 7/8” 1” 1-1/8” 1-1/4”
3/8” 3/4” 7/8” 1” 1-1/8” 1-1/4”
» Lineal Bars available in all dimensions. » One-Piece configuration is available in all dimensions. » Coped-End configuration is not presently available. » Cut-N-Notch configuration is available where highlighted in green.
45o
B
A
Custom Glass ProductsP.O. Box 2049 | 1475 Harrison Rd. | Salisbury, NC 28145
Phone: (704) 633.8444 | Fax: (704) 638.2666Email: [email protected]
Website: www.cgpglass.com
SPECIFICATION: AAMA/WDMA/CSA 101/I.S.2/A440-11, NAFS - North American Fenestration Standard/Specification for Windows, Doors, and Skylights
Decralite® SDL GridsFA Profile
“A” Dimension “B” Dimension
3/16” 7/8” 1” 1-1/8” 1-1/4”
1/4” 7/8” 1” 1-1/8” 1-1/4”
3/8” 7/8” 1” 1-1/8” 1-1/4”
» Lineal Bars available in all dimensions. » One-Piece configuration is available in all dimensions. » Coped-End configuration is available 3/8” thickness (Dimension “A”) for all widths. » Cut-N-Notch configuration is available where highlighted in green.
45o
B
A
Custom Glass ProductsP.O. Box 2049 | 1475 Harrison Rd. | Salisbury, NC 28145
Phone: (704) 633.8444 | Fax: (704) 638.2666Email: [email protected]
Website: www.cgpglass.com
SPECIFICATION: AAMA/WDMA/CSA 101/I.S.2/A440-11, NAFS - North American Fenestration Standard/Specification for Windows, Doors, and Skylights
Decralite® SDL GridsRC Profile
“A” Dimension “B” Dimension
1/4” 1” 1-1/8” 1-1/4”
» Lineal Bars available in all dimensions. » One-Piece configuration is available in all dimensions. » Coped-End configuration is available in all dimensions. » Cut-N-Notch configuration is available where highlighted.
B
A
Custom Glass ProductsP.O. Box 2049 | 1475 Harrison Rd. | Salisbury, NC 28145
Phone: (704) 633.8444 | Fax: (704) 638.2666Email: [email protected]
Website: www.cgpglass.com
SPECIFICATION: AAMA/WDMA/CSA 101/I.S.2/A440-11, NAFS - North American Fenestration Standard/Specification for Windows, Doors, and Skylights
Decralite® SDL GridsAL Profile
“A” Dimension “B” Dimension
1/4” 1” 1-1/8” 1-1/4”
» Lineal Bars available in all dimensions. » One-Piece configuration is available in all dimension. » Coped-End configuration is presently not available » Cut-N-Notch configuration is available where highlighted.
B
A
Custom Glass ProductsP.O. Box 2049 | 1475 Harrison Rd. | Salisbury, NC 28145
Phone: (704) 633.8444 | Fax: (704) 638.2666Email: [email protected]
Website: www.cgpglass.com
SPECIFICATION: AAMA/WDMA/CSA 101/I.S.2/A440-11, NAFS - North American Fenestration Standard/Specification for Windows, Doors, and Skylights
Decralite® SDL GridsSB Profile
“A” Dimension “B” Dimension
3/16” 3/4” 7/8” 1” 1-1/8” 1-1/4”
1/4” 3/4” 7/8” 1” 1-1/8” 1-1/4”
» Lineal Bars available in all dimensions. » One-Piece configuration is available in all dimension. » Coped-End configuration is available. » Cut-N-Notch configuration is available where highlighted in green.
B
A
Custom Glass ProductsP.O. Box 2049 | 1475 Harrison Rd. | Salisbury, NC 28145
Phone: (704) 633.8444 | Fax: (704) 638.2666Email: [email protected]
Website: www.cgpglass.com
SPECIFICATION: AAMA/WDMA/CSA 101/I.S.2/A440-11, NAFS - North American Fenestration Standard/Specification for Windows, Doors, and Skylights
Decralite® SDL GridsCG Profile
“A” Dimension “B” Dimension
1/4” 3/4” 7/8” 1” 1-1/8” 1-1/4”
7/32” 3/4” 7/8” 1” 1-1/8” 1-1/4”
3/8” 3/4” 7/8” 1” 1-1/8” 1-1/4”
» Lineal Bars available in all dimensions. » One-Piece configuration is available in all dimension. » Coped-End configuration is available only in 1/4” thickness (Dimension “A”) for all widths. » Cut-N-Notch configuration is available where highlighted in green.
B
A
Custom Glass ProductsP.O. Box 2049 | 1475 Harrison Rd. | Salisbury, NC 28145
Phone: (704) 633.8444 | Fax: (704) 638.2666Email: [email protected]
Website: www.cgpglass.com
SPECIFICATION: AAMA/WDMA/CSA 101/I.S.2/A440-11, NAFS - North American Fenestration Standard/Specification for Windows, Doors, and Skylights
Decralite® SDL GridsXL Profile
“A” Dimension “B” Dimension
1/4” 1” 1-1/8” 1-1/4”
» Lineal Bars available in all dimensions. » One-Piece configuration is available in all dimensions. » Coped-End configuration is not presently available. » Cut-N-Notch configuration is available where highlighted.
B
A
Custom Glass ProductsP.O. Box 2049 | 1475 Harrison Rd. | Salisbury, NC 28145
Phone: (704) 633.8444 | Fax: (704) 638.2666Email: [email protected]
Website: www.cgpglass.com
SPECIFICATION: AAMA/WDMA/CSA 101/I.S.2/A440-11, NAFS - North American Fenestration Standard/Specification for Windows, Doors, and Skylights
Decralite® SDL Grids - AluminumFlat Profile
“A” Dimension “B” Dimension
1/8” 1/2” 3/4” 1” 1-1/8” 1-1/4”
1/4” 1/2” 3/4” 1” 1-1/8”
» Special Order Only, Not a Stock Item. » Lineal Bars available in all dimensions. » Coped-End configuration is available in all dimensions.
B
A
Custom Glass ProductsP.O. Box 2049 | 1475 Harrison Rd. | Salisbury, NC 28145
Phone: (704) 633.8444 | Fax: (704) 638.2666Email: [email protected]
Website: www.cgpglass.com
SPECIFICATION: AAMA/WDMA/CSA 101/I.S.2/A440-11, NAFS - North American Fenestration Standard/Specification for Windows, Doors, and Skylights
Decralite® SDL Grids - AluminumTube Profile
“A” Dimension “B” Dimension
1/2” 3/4” 1” 1-1/8” 1-1/4”
» Special Order Only, Not a Stock Item. » Lineal Bars available in all dimensions. » Coped-End configuration is available in all dimensions.
B
A
Custom Glass ProductsP.O. Box 2049 | 1475 Harrison Rd. | Salisbury, NC 28145
Phone: (704) 633.8444 | Fax: (704) 638.2666Email: [email protected]
Website: www.cgpglass.com
SPECIFICATION: AAMA/WDMA/CSA 101/I.S.2/A440-11, NAFS - North American Fenestration Standard/Specification for Windows, Doors, and Skylights
Decralite® SDL Grids - AluminumOG Profile
“A” Dimension “B” Dimension
1/4” 1” 1-1/4”
» Special Order Only, Not a Stock Item. » Lineal Bars available in all dimensions. » Coped-End configuration is available in all dimensions.
B
A
Custom Glass ProductsP.O. Box 2049 | 1475 Harrison Rd. | Salisbury, NC 28145
Phone: (704) 633.8444 | Fax: (704) 638.2666Email: [email protected]
Website: www.cgpglass.com
SPECIFICATION: AAMA/WDMA/CSA 101/I.S.2/A440-11, NAFS - North American Fenestration Standard/Specification for Windows, Doors, and Skylights
Decralite® SDL Grids - AluminumAD Profile
» Special Order Item Only, Not In Stock. » Lineal Bars available in all dimensions. » Coped-End configuration is available in all dimensions.
“A” Dimension “B” Dimension
7/16” 1” 1-1/4”
B
A
Custom Glass ProductsP.O. Box 2049 | 1475 Harrison Rd. | Salisbury, NC 28145
Phone: (704) 633.8444 | Fax: (704) 638.2666Email: [email protected]
Website: www.cgpglass.com
SPECIFICATION: AAMA/WDMA/CSA 101/I.S.2/A440-11, NAFS - North American Fenestration Standard/Specification for Windows, Doors, and Skylights
Decralite® SDL Grids - WoodOG Profile
“A” Dimension “B” Dimension
1/4” 7/8” 1” 1-1/8” 1-1/4”
» Special Order Only, Not a Stock Item. » Lineal Bars available in all dimensions. » Coped-End configuration is available in all dimensions.
B
A
Custom Glass ProductsP.O. Box 2049 | 1475 Harrison Rd. | Salisbury, NC 28145
Phone: (704) 633.8444 | Fax: (704) 638.2666Email: [email protected]
Website: www.cgpglass.com
SPECIFICATION: AAMA/WDMA/CSA 101/I.S.2/A440-11, NAFS - North American Fenestration Standard/Specification for Windows, Doors, and Skylights
Check Rail ProfileDecralite® SDL Grids
Custom Glass ProductsP.O. Box 2049 | 1475 Harrison Rd. | Salisbury, NC 28145
Phone: (704) 633.8444 | Fax: (704) 638.2666Email: [email protected]
Website: www.cgpglass.com
SPECIFICATION: AAMA/WDMA/CSA 101/I.S.2/A440-11, NAFS - North American Fenestration Standard/Specification for Windows, Doors, and Skylights
Decralite® SDL GridsFlat Check Rail Profile
“A” Dimension “B” Dimension
040 2” 2-3/8” 3” 3-1/2”
070 2” 2-3/8” 3” 3-1/2”
093 2” 2-3/8” 3” 3-1/2”
1/8” 2” 2-3/8” 3” 3-1/2”
3/16” 2” 2-3/8” 3” 3-1/2”
1/4” 2” 2-3/8” 3” 3-1/2”
3/8” 2” 2-3/8” 3” 3-1/2”
» Lineal Bars available in all dimensions. » Coped-End configuration is available in all dimensions.
B
A
Custom Glass ProductsP.O. Box 2049 | 1475 Harrison Rd. | Salisbury, NC 28145
Phone: (704) 633.8444 | Fax: (704) 638.2666Email: [email protected]
Website: www.cgpglass.com
SPECIFICATION: AAMA/WDMA/CSA 101/I.S.2/A440-11, NAFS - North American Fenestration Standard/Specification for Windows, Doors, and Skylights
Decralite® SDL GridsOG Check Rail Profile
“A” Dimension “B” Dimension
1/8” 2” 2-3/8” 3” 3-1/2”
3/16” 2” 2-3/8” 3” 3-1/2”
1/4” 2” 2-3/8” 3” 3-1/2”
» Lineal Bars available in all dimensions. » Cut to size available.
B
A
Custom Glass ProductsP.O. Box 2049 | 1475 Harrison Rd. | Salisbury, NC 28145
Phone: (704) 633.8444 | Fax: (704) 638.2666Email: [email protected]
Website: www.cgpglass.com
SPECIFICATION: AAMA/WDMA/CSA 101/I.S.2/A440-11, NAFS - North American Fenestration Standard/Specification for Windows, Doors, and Skylights
Decralite® SDL GridsPT Check Rail Profile
“A” Dimension “B” Dimension
1/8” 2” 2-3/8” 3” 3-1/2”
3/16” 2” 2-3/8” 3” 3-1/2”
1/4” 2” 2-3/8” 3” 3-1/2”
» Lineal Bars available in all dimensions. » Cut to size available.
B
A
Custom Glass ProductsP.O. Box 2049 | 1475 Harrison Rd. | Salisbury, NC 28145
Phone: (704) 633.8444 | Fax: (704) 638.2666Email: [email protected]
Website: www.cgpglass.com
SPECIFICATION: AAMA/WDMA/CSA 101/I.S.2/A440-11, NAFS - North American Fenestration Standard/Specification for Windows, Doors, and Skylights
Decralite® SDL GridsMI Check Rail Profile
“A” Dimension “B” Dimension
1/8” 2” 2-3/8” 3” 3-1/2”
3/16” 2” 2-3/8” 3” 3-1/2”
1/4” 2” 2-3/8” 3” 3-1/2”
» Lineal Bars available in all dimensions. » Cut to size available.
B
A
Custom Glass ProductsP.O. Box 2049 | 1475 Harrison Rd. | Salisbury, NC 28145
Phone: (704) 633.8444 | Fax: (704) 638.2666Email: [email protected]
Website: www.cgpglass.com
SPECIFICATION: AAMA/WDMA/CSA 101/I.S.2/A440-11, NAFS - North American Fenestration Standard/Specification for Windows, Doors, and Skylights
Decralite® SDL GridsTD Check Rail Profile
“A” Dimension “B” Dimension
3/16” 2” 2-3/8” 3” 3-1/2”
1/4” 2” 2-3/8” 3” 3-1/2”
» Lineal Bars available in all dimensions. » Cut to size available.
B
A
Custom Glass ProductsP.O. Box 2049 | 1475 Harrison Rd. | Salisbury, NC 28145
Phone: (704) 633.8444 | Fax: (704) 638.2666Email: [email protected]
Website: www.cgpglass.com
SPECIFICATION: AAMA/WDMA/CSA 101/I.S.2/A440-11, NAFS - North American Fenestration Standard/Specification for Windows, Doors, and Skylights
Decralite® SDL GridsTR Check Rail Profile
“A” Dimension “B” Dimension
3/16” 2” 2-3/8” 3” 3-1/2”
1/4” 2” 2-3/8” 3” 3-1/2”
» Lineal Bars available in all dimensions. » Cut to size available.
B
A
Custom Glass ProductsP.O. Box 2049 | 1475 Harrison Rd. | Salisbury, NC 28145
Phone: (704) 633.8444 | Fax: (704) 638.2666Email: [email protected]
Website: www.cgpglass.com
SPECIFICATION: AAMA/WDMA/CSA 101/I.S.2/A440-11, NAFS - North American Fenestration Standard/Specification for Windows, Doors, and Skylights
Decralite® SDL GridsTL Check Rail Profile
“A” Dimension “B” Dimension
3/16” 2” 2-3/8” 3” 3-1/2”
1/4” 2” 2-3/8” 3” 3-1/2”
» Lineal Bars available in all dimensions. » Cut to size available.
B
A
Custom Glass ProductsP.O. Box 2049 | 1475 Harrison Rd. | Salisbury, NC 28145
Phone: (704) 633.8444 | Fax: (704) 638.2666Email: [email protected]
Website: www.cgpglass.com
SPECIFICATION: AAMA/WDMA/CSA 101/I.S.2/A440-11, NAFS - North American Fenestration Standard/Specification for Windows, Doors, and Skylights
Decralite® SDL GridsWX Check Rail Profile
“A” Dimension “B” Dimension
3/16” 2” 2-3/8” 3” 3-1/2”
1/4” 2” 2-3/8” 3” 3-1/2”
» Lineal Bars available in all dimensions. » Cut to size available.
B
A
Custom Glass ProductsP.O. Box 2049 | 1475 Harrison Rd. | Salisbury, NC 28145
Phone: (704) 633.8444 | Fax: (704) 638.2666Email: [email protected]
Website: www.cgpglass.com
SPECIFICATION: AAMA/WDMA/CSA 101/I.S.2/A440-11, NAFS - North American Fenestration Standard/Specification for Windows, Doors, and Skylights
Decralite® SDL Grids - AluminumFlat Check Rail Profile
“A” Dimension “B” Dimension
1/8” 2” 2-3/8” 3” 3-1/2”
1/4” 2” 2-3/8” 3” 3-1/2”
» Special Order Only, Not a Stock Item. » Lineal Bars available in all dimensions.
B
A
Custom Glass ProductsP.O. Box 2049 | 1475 Harrison Rd. | Salisbury, NC 28145
Phone: (704) 633.8444 | Fax: (704) 638.2666Email: [email protected]
Website: www.cgpglass.com
SDL ColorsDecralite® SDL Grids
Custom Glass ProductsP.O. Box 2049 | 1475 Harrison Rd. | Salisbury, NC 28145
Phone: (704) 633.8444 | Fax: (704) 638.2666Email: [email protected]
Website: www.cgpglass.com
Decralite® SDL ColorsStandard
Non - Standard
page 1/2
continuation >
Tan 1315 Beige 1395 Sand 1171Gloss White 8166
Flat White 9313
HR MW Red 0532
HR Forest Green 0659
HR Dark Bronze 0260
HR Chocolate 0864
HR Black 0244
Entry door
Laminated
Light Oak 4145 Mahogany 4124
Textured Light Oak 4145
Textured Ma-hogany 4124
Laminated Int Cherry
Laminated Int Dark Oak
Laminated Int Light Oak
Laminated Int Melrose Cherry
Laminated ST Oak
Laminated ST Pine
Freedom White 0543
White-96 1821
MI White 9799Antique White 2754
New Gloss White 2997
VK White 8055
Winter White 1837
HR VK Sandal-wood 0156
HR MW White 0173
AW White 8054
Porsche White 3573
HR MW Ivory 0159
HR Tan 0146 HR PD Chelsea Clay 0174
MI Almond 0087
HR Bella Vista Beige 0165
HR Grey Primer APM-310
AD Tan 2755
Custom Glass ProductsP.O. Box 2049 | 1475 Harrison Rd. | Salisbury, NC 28145
Phone: (704) 633.8444 | Fax: (704) 638.2666Email: [email protected]
Website: www.cgpglass.com
Decralite® SDL ColorsNon - Standard
page 2/2
HR Evergreen 1633
HR Lehigh Green 0639
HR Dark Bronze 0867
HR AW Cocoa Bean 0849
HR Bocatone 0936
HR AW Dark Brown 0809
HR Cajun Red 0554
Cleary Sage 1473
HR Aged Cop-per 0630
HR Bronze 0880
HR AW Terra-tone 0827
HR VK Bronze 0984
HR Charcoal Gray 0352
HR Black 0201
HR MW Dark Bronze 0874
Hartford Green 1009
HR MW Black 0244
HR VK Cocoa 0841
HR VK Hunter Green 1673
Pebble Tan 2978
HR VK Brick Red 0551
HR MW Red 0532
HR PD Red Velvet 0596
HR PD Bronze 0878
HR MW Forest Green 0659
HR MW Taupe 0818
HR Redwood 0579
Silver 0513 Taupe 1172
Tan 2755 Adobe 1474 HR VK Clay 0173
HR Chelsea Clay 0174
AW Sandtone 8055
Almond 8051
Clay 3347HR VK Cham-pagne 0163
HR MW San-dalwood 0183
HR Sand 0183 Western Clay 4475
Summit Gray 8612