CFD Project Titles
-
Upload
thota-sri-k-haritha -
Category
Documents
-
view
44 -
download
0
description
Transcript of CFD Project Titles
CFD PROJECT TOPICS
1) Numerical analysis of fixed pitch propeller.
2) CFD analysis airfoil and finite wing.
3) Study of numerical simulation of Propeller performance.
4) Effect of nacelle in the propeller aircraft.
5) CFD Analysis - Ground effect of a wing.
6) Longitudinal characterization of an aircraft.
7) Numerical investigation of airfoil boundary layer using CFD analysis.
8) Computational study of converging –diverging nozzles.
9) Numerical analysis of flow across low-speed centrifugal compressor.
10) Numerical analysis of gas turbine combustion chamber.
11) Performance investigation of wing for different angle of attacks.
12) Investigation of flow over a cylinder and sphere for various Reynolds numbers.
13) Simulating supersonic flow over a wedge structure.
14) Flow separation studies on different kinds airfoils using CFD.
15) Design and numerical simulation of missiles for different angles of attack.
16) Numerical analysis of gas turbine blade internal cooling.
17) CFD analysis of missile with planar and grid fins.
18) Numerical analysis of variable pitch propeller.
19) Preliminary design and CFD analysis on reusable launch vehicle.
20) Design and CFD analysis of ducted fan UAV.
21) CFD analysis of winglets at low subsonic flow.
22) Design and CFD analysis of canard wing UAV.
23) CFD analysis of multi element airfoil for wind turbine.
24) Design & performance analysis of rocket nozzle with multiple intakes.
25) Shock elimination in supersonic rocket nozzle using CFD.
26) CFD analysis on the pulsejet with multiple inlets.
27) CFD analysis over a blended body wing with high lift devices.
28) CFD analysis for a rotary wing UAV.
29) Flow analysis over dimple wing using CFD
30) Design and analysis of ramjet engine.
31) Numerical study of wind tunnel wall interference on wing / Aircraft
STRUCTURAL ANALYSIS PROJECT LIST
32) Stress Analysis of Aircraft Wing Using Different Composites
33) Design & Stress Analysis of an Inflatable Wing For An UAV
34) Design And Optimization of Wing Structure For a Jet Trainer Aircraft
35) Design And Structural Optimization of Fuselage Structure
36) Design And Vibration Analysis of Main Rotor Blade of A Trainer Helicopter
37) Fatigue Analysis of A Panel Consisting of Window Cutout And Frames in The Fuselage of a
Transport Airframe
38) Landing Gear Stress Analysis
39) Analysis of Bolted Joints in Membrane Rib Assembly
40) Modeling And Analysis of Turbine Blade
41) Aircraft Wind Shield bird strike Analysis
42) Model Analysis of Ribs And Spars of Wing
43) Design And Model Analysis of Bulkhead For a Jet-Trainer Aircraft
44) Design And Model Analysis of Fuselage Structure For a Jet-Trainer Aircraft
45) Design And Stress Analysis of Horizontal Stabilizer For a Typical Trainer Aircraft
46) Stress and fatigue life prediction of wing fuselage attachment bracket
47) Buckling analysis of aircraft wing
48) Buckling analysis of fuselage structures
49) Stress and fatigue life prediction bottom fuselage fuel tank
50) Stress Analysis of Uniaxial Loading of Laminated Composite Plate
51) Design and Structural Analysis of Turbine Blade