CF_Cables
-
Upload
fidel-machado -
Category
Documents
-
view
152 -
download
1
Transcript of CF_Cables
-
John Deere Construction & Forestry Company 1515 5
th Avenue, Moline IL 61265
SERVICE ADVISOR CABLE CATALOG
C&F Service ADVISOR Machine Connection Components EDL Kit, Cables and Accessories: SA1001 Mini EDL Kit
Contains part numbers listed below: SA1000 Electronic Data Link (EDLv2) DS10045 16 ft USB Cable DS10039 Interface Cable W1 (9-pin to EDL) SA1004 Black Storage Box
SA1000 Electronic Data Link v2
Built in Class 1 Bluetooth or USB connection to laptop Computers without built-in Bluetooth capability will require
Class 1 USB Bluetooth Adaptor. (For Bluetooth Wireless connection)
All existing vehicle cables are compatible 3 CAN Channels Shipped with DS10045 16 ft USB Cable Most vehicles also require DS10039 for 9-pin connectors, sold separately.
DS10039 Interface Cable W1 All
All JD vehicles with industry standard SAE J1939/13 connector (9 pin Deutsch)
All OEM engines with Deere ECU Connects EDL to 9-pin vehicle connector.
-
Excavator Special Cables DS10052 Interface Cable W9 C&F
4-pin for use with C-Series or DHSP D-Series Excavators ICX connection
Serial to Excavator connector (15 ft Cable) Computers without 9-pin serial port will require Serial to
USB adapter. (Not included.)
DS10140 Interface Cable W12 C&F
6-pin for use with D-Series and IT4 G-Series Excavators ICF connection
Serial to Excavator connector (15 ft Cable) Computers without 9-pin serial port will require Serial to
USB adapter. (Not included.)
SA1003 Interface Cable W13 C&F
6-pin Deutsch connector for use with early Yanmar 60D Excavators.
Connects EDL directly to engine diagnostic port (by battery on machine)
Allows Service ADVISOR to be used with Yanmar machines without 9-pin connector.
DS10129 Interface Cable C&F
Early Zaxis Excavators-converts CAN terminals to 9-pin.
Note: This part has been discontinued and replaced with SA1002.
SA1002 Interface Cable C&F
Zaxis Excavators-converts CAN terminals to 9-pin. Replaces DS10129, contains additional 2-pin Hitachi
connectors for JDLink and Service ADVISOR.
-
Large Liebherr Crawler Special Cables LW10035410 Interface Cable C&F
Necessary for LinDiag or DcDesk diagnostic connection with large Liebherr crawlers.
Serial to 9-pin connector for 950J and 1050J crawlers. Serial port on laptop or serial adapter needed, not
included.
LW10297212 Security Dongle
Necessary for LinDiag (TCU) diagnostic connection with large Liebherr crawlers.
USB Dongle unlocks security to allow LinDiag to run.
LW10035431 Security Dongle
Necessary for DcDesk (ECU) diagnostic connection with large Liebherr crawlers.
USB Dongle unlocks security to allow DcDesk to run.
AT334638 Large Liebherr Crawler Connectivity Kit
Cable LW1003541 and dongles LW10297212 and LW10035431 shown above. Software can be found in Service ADVISOR Manuals for 950J and 1050J crawlers.
Compact Liebherr Loader Special Cables
AT336793 Interface Cable C&F
Necessary for updating compact loader firmware (payload) with Service ADVISOR.
Serial to 9-pin with momentary contact pushbutton. 244J, 304J, 344J machines.
Serial port on laptop or serial adapter needed, not included.
-
ADT Special Cables
TT216024 RS232-to-Serial Converter Box Tier 2 ADTs without 9-Pin connector Serial to Deutsch 6- and 4-pin. Serial port on laptop or serial adapter needed, not included.
TT217075 Interface Cable C&F
Adapter for RS232 Converter Box TT216024
SSL Special Cables
AT330695 Early Manual SSL Monitors without 9-Pin connector. Included in kit MPT12388, released previously.
Legacy Special Cables DS10048 Interface Cable W2 C&F
Previous Nexiq P/N 9239-084 Required to use W3, W5, W7, W8
DS10041 Interface Cable W3 All
Previous Nexiq P/N 9239-080 6125 engines with Lucas ECU
-
DS10049 Interface Cable W5 C&F
Previous Nexiq P/N 9239-086 Construction Equipment Power Source for PDM
DS10055 Interface Cable W6 C&F
Previous Nexiq P/N 9239-087 Loaders, Skidders, Motor Graders, C Crawlers
DS10050 Interface Cable W7 C&F
Previous Nexiq P/N 9239-088 Loaders, Skidders, Motor Graders, C Crawlers
DS10051 Interface Cable W8 C&F
Previous Nexiq P/N 9239-089 Focus III Engines
DS10053 Interface Cable W10 C&F
Previous Nexiq P/N 9239-097 Use with Deere Service ADVISOR Haul Truck
applications GM 12-pin to HD26 PDM 4 Ft Cable
Pricing: Check the John Deere Parts System (JDPoint) for current pricing. Additional Information: Contact the Service ADVISOR Support Team at John Deere Information Systems (JDIS) by e-mail at [email protected] for after purchase support.