CF-FA12-DPT_154__2227_12331185640
-
Upload
profu-de-om -
Category
Documents
-
view
3 -
download
0
Transcript of CF-FA12-DPT_154__2227_12331185640
![Page 1: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/1.jpg)
Suspension Systems
![Page 2: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/2.jpg)
Objectives
• Identify the suspension systems used on current trucks.
• Describe the components used on mechanical leaf and multileaf spring suspension systems and explain how they work.
• Identify equalizing beam suspension system components and explain how they function.
• Identify air spring suspension system components and explain how they function.
![Page 3: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/3.jpg)
INTRODUCTION
A suspension system supports the frame on a vehicle. It acts as an intermediary between the axles and the frame. The axles are subject to whatever forces they encounter when running down the highway.
![Page 4: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/4.jpg)
FUNCTIONS OF THE SUSPENSION
• It stabilizes the truck when traveling over smooth highway as well as over rough terrain.
• It cushions the chassis from road shock and enables the driver to steer the truck.
• It maintains the proper axle spacing and alignment.
• It provides a smooth ride when both loaded and unloaded.
![Page 5: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/5.jpg)
Key Terms• Jounce
– Most compressed condition of a spring
• Rebound– Reactive response of a spring
• Unsprung Weight– Weight of any chassis component not supported
by the suspension (keep low)
• Oscillation– Rhythmic or irregular vibrations (shocks prevent)
![Page 6: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/6.jpg)
CATEGORIES OF SUSPENSIONS
• Leaf spring
• Equalizer beam: leaf spring and solid rubber spring
• Rubber block and torsion bar
• Air spring: pneumatic-only and combination air/leaf spring
![Page 7: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/7.jpg)
LEAF SPRING SUSPENSIONS(Constant Rate)
![Page 8: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/8.jpg)
FRONT SUSPENSION
![Page 9: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/9.jpg)
CONSTANT RATE
Example: 500lbs =1in
![Page 10: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/10.jpg)
Rear Suspension—Single Axle
![Page 11: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/11.jpg)
Shop Talk
When assembling multileaf spring packs, never paint or lubricate the contact surfaces of the individual leaves. The result would severely limit the selfdampening characteristics of the spring. (Interleaf Friction)
The friction of the springs rubbing against each other has a shock limiting effect.
![Page 12: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/12.jpg)
Taper leaf spring assembly
Fewer leaves required=less weightVariable spring rate, Front Axle
![Page 13: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/13.jpg)
VARIABLE RATE
Overall length changes to carry increases loads
![Page 14: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/14.jpg)
Axle Adjustments
![Page 15: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/15.jpg)
FIBER COMPOSITE LEAF SPRINGS
Used for a few years in autos, fiber composite leaf springs have found their way into heavy-duty trucks and trailers. They are made of high-tech composite fibers that are laminated and bonded by tough polyester resins. The long strands of fiber are saturated with resin and bundled together by wrapping (a process called filament winding) or squeezed together under pressure (compression molding).
![Page 16: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/16.jpg)
Maintenance
U-bolts that loosen in service place undue strain on the spring center bolt. OEMs state that center bolts should be re-torqued at specified intervals but this is seldom done. If you are torquing center bolts on a spring not clamped by U-bolts, remember that they are under considerable tension should the center bolt fail.
![Page 17: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/17.jpg)
SPRING SUSPENSION WITH SHOCK ABSORBERS
![Page 18: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/18.jpg)
Shock Absorber Inspection
OEMs suggest checking shock absorbers at intervals of 12,000 miles (20,000 km).
Do not operate a vehicle with a shock absorber removed or defective because this places undue stress on other suspension components.
![Page 19: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/19.jpg)
Rear Suspension—Tandem Axle
![Page 20: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/20.jpg)
Torque Rod
![Page 21: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/21.jpg)
EQUALIZER REPLACEMENT
![Page 22: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/22.jpg)
Bogie Suspensions
A bogie is a general term used to describe a pair of axles arranged with common suspension members designed to act and react together. The ends of both camelback spring assemblies and walking beams are mounted in rubber shock insulators.
![Page 23: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/23.jpg)
EQUALIZING BEAM SUSPENSIONS
Two types of equalizing suspensions are used on heavy-duty trucks:
• Leaf spring type
• Solid rubber or rubber cushion type
-Allow maximum suspension travel
![Page 24: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/24.jpg)
LEAF SPRING EQUALIZING BEAM
![Page 25: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/25.jpg)
CUSHION AND TORSIONSUSPENSIONS
![Page 26: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/26.jpg)
Sectional view of the rubber cushion-type equalizing beam suspension.
![Page 27: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/27.jpg)
CONTROL LINK, RUBBER SPRINGAND EQUALIZING BEAM
One variable rate rubber spring located in the center of the tandem8 links to align axles
![Page 28: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/28.jpg)
![Page 29: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/29.jpg)
SERVICING EQUALIZINGBEAMS
Power wash the suspension and inspect the components for cracks or damage. Inspect rubber bushings for damage or deterioration and plan to replace them if they show any indications of fatigue.
There are 3 types:
![Page 30: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/30.jpg)
EQUALIZING BEAM OVERHAUL
![Page 31: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/31.jpg)
Tube-type beam end mounting
![Page 32: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/32.jpg)
Ball and socket beam end mounting.
![Page 33: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/33.jpg)
AIR SPRING SUSPENSIONS
![Page 34: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/34.jpg)
Combination air/steel spring suspension installation
![Page 35: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/35.jpg)
AIR AND TORSION ROD SUSPENSION
Kenworth: max travel best ride
![Page 36: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/36.jpg)
Air Springs
![Page 37: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/37.jpg)
AIR SPRING TERMINOLOGY
![Page 38: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/38.jpg)
SHOCK ABSORBER ORIENTATION
![Page 39: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/39.jpg)
RIDE HEIGHT ADJUSTMENT
![Page 40: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/40.jpg)
Location of the height control valve
and components.
![Page 41: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/41.jpg)
CHECKING A RIDE HEIGHTCONTROL VALVE
Most ride height control valves have a reaction delay that can be as long as 15 seconds. This is used to prevent continuous correction cycling. Remember this when diagnosing height control valve problems.
A simple test is to remove the control rod and manually raise and or lower the frame height.
![Page 42: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/42.jpg)
![Page 43: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/43.jpg)
REPLACING A HEIGHTCONTROL VALVE
![Page 44: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/44.jpg)
AIR CIRCUIT MAINTENANCE
![Page 45: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/45.jpg)
AXLE ALIGNMENT
Several types of equipment and methods can be used to check axle alignment. These methods include light and laser beam alignment equipment and computer controlled sensor systems. A straightedge and trammel can also be used to check axle alignment. This last method is the most difficult and inaccurate method of checking axle alignment and should be used only when no other alignment equipment is available.
![Page 46: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/46.jpg)
Laser Alignment
![Page 47: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/47.jpg)
Tram bar
![Page 48: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/48.jpg)
Measuring dimension “A” axlealignment.
![Page 49: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/49.jpg)
Cab air suspension system with a transverse rod, two air springs, one shock
absorber and a leveling valve.
![Page 50: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/50.jpg)
Exploded view of two-point cab airsuspension.
![Page 51: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/51.jpg)
DRIVER SEATS
Air-suspended driver’s seatSolid-mounted seat.
![Page 52: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/52.jpg)
Summary
There are four general categories of suspension used on trucks:
• Leaf spring
• Equalizer beam: leaf spring and solid rubber spring
• Rubber or air cushion cushion and torsion bar
• Air spring: pneumatic-only and combination air/leaf spring
![Page 53: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/53.jpg)
Summary (cont.)
• Jounce describes a spring in its most compressed state, whereas rebound describes a spring when it extends after reacting to jounce.
• Unsprung weight is not supported by the suspension; it includes the wheel and axle assemblies. Because unsprung weight reacts directly through the suspension to the frame, it is kept as light as possible.
![Page 54: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/54.jpg)
Summary (cont.)
• Shock absorbers are used in suspension systems to dampen suspension oscillations. Shock absorbers reduce tire wear, front wheel shimmy, and spring breakage.
• Air bags can be either the reversible sleeve type or the convoluted type.
![Page 55: CF-FA12-DPT_154__2227_12331185640](https://reader034.fdocuments.us/reader034/viewer/2022051820/552e365a4a7959d5588b48de/html5/thumbnails/55.jpg)
Summary (cont.)
• Air springs have no self-dampening capability so they almost always use shock absorbers.
• Equalizer beam suspensions are used in tandem drive and bogie arrangements to effectively balance suspension stresses and maximize tire-to road contact.