CertifyMe - GRATIS EXAM · 2019-11-09 · As a Cisco Network Engineer, you have to master the...

CertifyMe

Number: 642-067Passing Score: 800Time Limit: 120 minFile Version: 9.6

http://www.gratisexam.com/

CertifyMe 642-067

Exam A

QUESTION 1As a Network Engineer in an iternationai corporation, you are familliar with the Cisco products, services andsolutions. Which of the following statement describes one of the charactersties of the Cisco validated Design(CVD) architectural selling approach?

A. This approach does rot support verticalization although It is aligned to partner programs.B. This approach integrates solutions by combining technologies that are aligned to customer buying patterns.C. This approach is not aligned to partner programs although it supports verticalization.D. This approach separates technologies on the basiss of customer buying patterns.

Correct Answer: BSection: (none)Explanation

Explanation/Reference:

QUESTION 2As a Cisco Network Engineer, you have to master the knowledge of the Cisco validated Design (CVD) program.Which three of the following descriptions are appropriate about the CVD program? (Choose three.)

A. It incorporates a narrow range of technologies and products.B. It facilitates faster and more reliable customer deployments.C. It extends the value of designs through a sustained development plan.D. It incorporates products and technologies into enterprise, service provider, and commercial systems.

Correct Answer: BCDSection: (none)Explanation


QUESTION 3As a Cisco Network Engineer, you have to master the knowledge of the Cisco validated Design program.Which two of the following descriptions correctly identify its features? (Choose two.)

A. It strives to protect access to design documentation.B. It facilitates customer deployments that are more predictable.C. It facilitates customer deployments that are less reliable.D. It incorporates products and technologies into a broad portfolio.

Correct Answer: BDSection: (none)Explanation


QUESTION 4Compare the features of the Cisco PIN architecture and Cisco validated Designs. Which two of the followingstatements are making sense? (Choose two.)

A. Cisco validated Designs can be implemented quickly without customer input.

B. Cisco is focusing on the PIN architecture as a means to driving integrated networks.C. The Cisco PIN architecture is a critical mechanism for supporting integrated markets because it can be

implemented quickly.D. The Cisco validated Designs program provides critical mechanisms for supporting integrated markets

because the mechanisms can be implementedquickly.



QUESTION 5As a Network Engineer, you decide to apply Cisco enterprise solution throughout the CIS network. What are thetwo advantages? (Choose two.)

A. cost savingsB. product varietyC. well-tested interoperabilityD. regular upgrade process

Correct Answer: ACSection: (none)Explanation


QUESTION 6As an experienced technician, you are responsible for Technical Support in your company. You ask one of thetrainees to document the layers of an existing CIS network. Which three statements best characterize thisprocess? (Choose three.)


A. It provides reliable input for verifying network consistency.B. It requires a network audit to support some upgrade decisions.C. It requires a network audit to support any network restructuring.D. It begins with gathering organizational input that may be inaccurate.

Correct Answer: ACDSection: (none)Explanation


QUESTION 7

When HSRP is configured on a network, which two of these items are provided, which are shared between therouters that run HSRP ? (choose two)

A. Shared single interfaceB. IP AddressC. TCP-based hello packetsD. MAC address



QUESTION 8You are operating a multi-vendor network and are considering adding redundancy at the access level. Whichrouting redundancy solution should you implement?

A. Both Gateway Load Balancing Protocol and Hot Standby Router ProtocolB. Gateway Load Balancing ProtocolC. Virtual Router Redundancy ProtocolD. Hot Standby Router Protocol

Correct Answer: CSection: (none)Explanation


QUESTION 9Which tool allows a LAN client to determine which router should be the first hop to a particular remotedestination, allowing simplified client configuration and processing without creating a single point of failure?

A. Proxy ARPB. IRDPC. Dynamic Routing ProtocolD. VRRP

Correct Answer: DSection: (none)Explanation


QUESTION 10You have just configured HSRP group 10 in vour network, Which MAC address will your default gateway use?

A. 0000.5E00.010a B. 0000.0c07.ac0aC. 0000.0c07.0110D. 000.0cac.070a



QUESTION 11Hot Standby Router Protocol (HSRP) is able to provide network redundancy for IP networks. Concerning HSRPload sharing, which two descriptions make sense?

A. It is achieved by using more than one HSRP group.B. It is done in regards to either round robin or weight basis.C. It is used to offload the active router in a certain HSRP group.D. The return traffic is influenced by HSRP load sharing configuration.E. Single group HSRP is used to achieve more efficient link utilization.



QUESTION 12

HSRP. Known as Hot Stanclby Router Protocol, is a Cisco proprietarv redundancy protocol . As anexperienced network administrator, you are required to configure HSRP on a XYZ network. Which TWO of thefollowing wii be available and shared between the routers configured with HSRP? (Choose two.)

A. a shared single interfaceB. the ability to track serial interfacesC. UDP-based hello packetsD. the impact of flapping links if timers are too low



QUESTION 13Refer to the exhibit. What is the HSRP state and priority of this interface after HSRP reaches its steady state?

A. Active, Priority 151B. Active, Priority 201C. Active, Priority 251D. Standby, Priority 151E. Standby, Priority 201F. Standby, Priority 251



QUESTION 14Refer to the exhibit. Which two of these accurately describe this router's supervisor redundancy status?(Choose two.)

A. both supervisors are activeB. SSO redundancy is being usedC. the second supervisor is unavailableD. the primary supervisor is unavailableE. the primary supervisor was reloaded nine seconds ago



QUESTION 15

Refer to the following architectures, which one is able to supply a core infrastructure so that customers cancapitalize quickly with the change of business requirements?

A. Branch

B. CampusC. TeleworkerD. Data center



QUESTION 16

You work as a network administrator in your company. Communication inside the company is ensured bynetwork environments, such as GET VPN, Dynamic Multipoint VPN and Ethernet. Which PIN architecture isapplicable in those environments?

A. CampusB. TeleworkerC. BranchD. Data center



QUESTION 17

The following exhibit displays the NetFlow statistics for a CIS router, which will be helpful for a networkadministrator to collect IP traffic information. Which two numbers separately refer to the percentage of packetssized between 32 and 64 bytes and the number of flows in progress?

A. 24.9%, 980B. 6.94%, 980C. 69.4%, 35D. cannot be determined from this outputE. 69.4%, 4061



QUESTION 18

What is required to enable fragmentation of large FTP packets when voice quality on the network is affected byFTP transfers?

A. Configure TCP header compression on interfaceB. Configure MPL on the Frame Relay interfacesC. Configure FRF .12 fragmentation on the Frame Relay interfacesD. Fragmentation is not supported with service internetworking



QUESTION 19

What are three pieces of information that the Cisco IOS show inventory command displays on a Cisco ISRRouter? (Choose three.)

A. Installed Hardware serial numbersB. The status of installed hardwareC. Installed hardwareD. Unique Device IdentifierE. system internal temperatureF. main power supply condition



QUESTION 20

Which of the following command allows you to view the UDI information for a Cisco device?

A. show environmentB. show statusC. show inventoryD. show hardware



QUESTION 21

As an experienced technician, you are responsible for Technical Support in your company. One of the traineesis asking you some quest|ons on the basis of the following output information. He is wondering, as to interfaceFa0/0, assuming that the queue depth value for class "newclass" reaches 32, how many packets will bedropped concerning dscp afll traffic?

A. All Packets will be droppedB. One out of Ten packets will be droppedC. No Packets will be dropped until queue depth reached 256D. Packets will be dropped according to the exponential weight setting



QUESTION 22

As an experienced technician, you are responsible for Technical Support in your company. One of the traineesis asking you some quest|ons on the basis of the following output information. He is wondering, as to interfaceFa0/0, assuming that the queue depth value for class "newclass" reaches 40, how many packets will bedropped concerning dscp afll traffic?

A. All Packets will be droppedB. One out of Ten packets will be droppedC. No Packets will be dropped until queue depth reached 256D. Packets will be dropped according to the exponential weight setting

Correct Answer: ASection: (none)Explanation


QUESTION 23

Optimize is one of the six phases of the Cisco Lifecycle Services framework. Which of the following in theoptimize phase allows you to assess the routing and switching system, as well as recommend actions, includingoptimizing device configurations, capacity planning, etc.?

A. Security AssessmentB. Change ManagementC. Technology AssessmentD. Operations Readiness Assessment



QUESTION 24

There are six phases of the Cisco Network Lifecycle Services framework. What are they?

A. Prepare, Plan, Design, Apply, Operate, and ManageB. Prepare, Plan, Design, Implement, Operate, and Optimize

C. Prepare, Plan, Design, Implement, Operate and ManageD. Prepare, Plan, Create, Implement, Operate, and Improve



QUESTION 25

There are six phases of the Cisco Lifecycle Services framework. In which of the following phases would aproposal be developed and delivered?

A. PrepareB. OperateC. PlanD. Design



QUESTION 26

There are six phases of the Cisco Lifecycle Services framework. During which of the following phases wouldthe Acceptance Testing be developed and documented?

A. OperateB. DesignC. ImplementD. Prepare



QUESTION 27

Which of the following procedure should be performed prior to delivery and generally involves running a suite ofoperations so as to verify that the solution is applicable for production?

A. Security CheckB. Acceptance TestingC. Project Close OutD. Systems Integration

Correct Answer: B

Section: (none)Explanation


QUESTION 28

Which of these is a prerequisite for and must always run with Cisco NSF?

A. RPRB. BGPC. SSOD. SRM



QUESTION 29

As an experienced technician, you are required to configure and verify SRM with SSO redundancy. In such asituation, you have to issue several commands in proper orders. Which of the following is correct?

A. show redundancy states, redundancy, mode ssoB. show redundancy states, mode sso, redundancyC. redundancy, mode sso, show redundancy statesD. mode sso, redundancy, show redundancy states



QUESTION 30

As a network administrator, you have configured a Catalyst 6500 Series Switch with redundant supervisorengine in a CIS network. What is the result of issuing the redundancy force-switchover command on thatswitch?

A. Automatic switchover from active to standby on primary supervisor failureB. Reset of the primary supervisor.C. Manual switchover from active to standby supervisorD. Manual switchover from standby to active supervisor



QUESTION 31

As an experienced Network Engineer, you are responsible for network connectivity and system configuration.Which of the following protocols will be supported by Cisco Nonstop Forwarding (NSF)?

A. ISSU, OSPF, IS-ISB. IETF, OSPF, ISSUC. IS-IS, EIGRP, SSO, BGPD. EIGRP, BGP, OSPF, IS-IS



QUESTION 32

In a switched CIS network, Rapid Spanning Tree Protocol is given the preference to be used to avoid Layer 2loops. Which two of the following are most probably the reasons for that preference?

A. Information about port roles is sent to all switches.B. RSTPs that are based on Cisco products require no additional configuration.C. Features such as UplinkFast and BackboneFast are compatible with RSTP.D. An RSTP that is based on Cisco products generally performs better than the Cisco proprietary 802.1D

enhancements.



QUESTION 33

A Cisco Catalyst switch is part of the CIS network. As an experienced network administrator, you are thinking offiltering the traffic within VLANI00 with the use of a VACL named "test" on that switch. Which of the followingcommand will enable that?

A. interface vlan 100ip access-group test in

B. interface vlan 100ip access-group test

C. vlan access-map test 100D. vlan filter test vlan-list 100



QUESTION 34

What can be specified in IP VACLs?

A. Protocol and IP source onlyB. IP Source, IP Destination and portsC. IP Source OnlyD. IP Destination Only



QUESTION 35

Which QoS mechanism will allow a single policy to be applied to multiple interfaces?

A. policy mapB. class mapC. ACLD. service policy



QUESTION 36

Which three configuration steps must be completed for a Cisco router in order to enable local AAA loginauthentication? (Choose three.)

A. Apply the method list to an interfaceB. Specify the default method list and apply it to the interfaceC. Enable AAAD. Define a method list



QUESTION 37

Which information is contained in a AAA authentication method list?

A. A pointer to the address where a RADIUS server can be locatedB. A sequential list of user authentication methods

C. A description of what a user can execute on a routerD. The setup for the authentication phase on a router



QUESTION 38

Which of the following statements about authentication responses and conditions is true? (Choosetwo.)

A. When a router receives a failure response, it stops querying authentication methods.B. When a router receives an error response, it stops querying authentication methods.C. If the router receives a failure response from an authentication method, it queries the next method.D. The router does not differentiate between failure and error responses; the authentication process is

always interrupted.E. If it receives no response from the authentication method, a router will determine the error condition

On its own; the router also has the option to proceed to the next method in a list if configured accordingly.

Correct Answer: AESection: (none)Explanation


QUESTION 39

In MPLS networks, what s the benefit of disabling TTL propagation?

A. To provide a visible extension of MPLS TTL functionality in a non MPLS-enabled domainB. To improve the IGP convergence timeC. To hide visibility to the core (provider) routers in the MPLS network D. To provide a visible extension of IP TTL functionality in an MPLS-enabled domain



QUESTION 40

As there are several logging modes, which mode will a CIS router use when it stores log messages in RandomAccess Memory?

A. syslog loggingB. console loggingC. buffered logging D. terminal logging



QUESTION 41

You would like to log messages up to the severity level "notification". Which three of these commands will youneed to issue in order to enable syslog messages to be sent to the syslog server at the IP address 10.1.5.5?(Choose three.)

A. logging onB. logging host 10.1.5.5C. logging console notificationsD. logging trap notifications

Correct Answer: ABDSection: (none)Explanation


QUESTION 42

There are seven basic steps of the core baseline process. Which one takes place first?

A. Implement threshold monitoring using RMON.B. Poll and record specific SNMP MIB objects from the deviceC. Verify that the SNMP MIB is supported in the relevant core device.D. Implement monitoring using SNMP or RMON.


Explanation/Reference:http://www.cisco.com/en/US/tech/tk869/tk769/technologies_white_paper09186a008014fb3b.shtml Answer : CCheck Answer

QUESTION 43

There are seven basic steps of the core baseline process. Which one comes in the end?

A. Verify that SNMP MIB is supported in the relevant core device.B. Implement monitoring using SNMP or RMON.C. Implement threshold monitoring using RMON.D. Poll and record specific SNMP MIB objects from the device.


Explanation/Reference:http://www.cisco.com/en/US/tech/tk869/tk769/technologies_white_paper09186a008014fb3b.shtml Answer : CCheck Answer

QUESTION 44

As an experienced technician, you are responsible for Technical Support in your company. One of the traineesis asking you in what might happen if he issues the logging trap information command. Which of the followingstatement will answer his quest|on?

A. Informational and debug messages are logged to the syslog server.B. All messages are sent to the logging host, where selections are made.C. An information trap is sent to the SNMP server.D. All messages from emergencies to informational are sent to the logging host.



QUESTION 45

What is the default severity level of syslog trap messages?

A. Warnings (severity=4)B. Errors (severity=3)C. notifications (severity=5)D. informational(severity=6)



QUESTION 46

Cisco IOS is the software used on the vast majority of Cisco Systems routers and current Cisco networkswitches. As a network administrator, you are required to configure MPLS on Cisco IOS. In such a situation,which three of the following steps are necessary to take?

A. Start LDP.B. Enable CEF switching.C. Configure conditional label advertising.D. Enable label switching on frame mode interfaces.E. disable IP TTL propagationF. configure conditional label advertising

Correct Answer: ABDSection: (none)

Explanation


QUESTION 47

While your MPLS core is using Cisco Routers, the core of a company you have acquired is not. After extendingyour MPLS VPN networks by integrating the cores, you discover that the end-to-end LPS path between PErouters can't be established. Which of the following may have caused this problem?

A. The BGP protocol versions do not matchB. You are using Cisco Proprietary TDP in your existing coreC. MP-BGP is not supported between different vendorsD. The MTUs do not matchE. MPLS is not supported between different vendors



QUESTION 48

As an experienced network administrator, you are aware of the knowledge that it is unnecessary to configurecomplex overlay network topologies while applying Cisco Wide Area Application Services (WAAS) technology.What is most probably the reason for that?

A. Content pre-positioningB. Automatic discovery of Cisco WAEsC. Comprehensive logs, reports, and graphsD. Remote scheduling of software distribution



QUESTION 49


The Cisco Enterprise Campus Architecture increases the effectiveness of networked applications and serviceson campus, enabling enterprises to grow their business and stay ahead. What is the outcome of designing allits components with taking interoperability into consideration?

A. improved connectivity options

B. strengthened securityC. high availabilityD. continuity of service



QUESTION 50

As an experienced Network Engineer, you are required to implement the security architecture assessment.Which of the following statement describes the most important reason for that?

A. Create a design specification document.B. Integrate routing and switching components.C. Document power and UPS availabilityD. Document the customer's current and future technology projects.



QUESTION 51

A Catalyst switch has just been installed and configured, and is not working as expected. You have decided tocapture multiple show command outputs to study. Which one command could you use that includes the outputof many other show commands, such as show version and show running-config?

A. show configurationB. show memoryC. show stacksD. show tech-support



QUESTION 52

On a Cisco Catalyst 4500 Series, the fail LED is lit for one if its two power supplies. Which command would youuse to check on this problem ?

A. Show module B. Show errdisable detect C. Show environmentD. Show diagnostic content



QUESTION 53

Assuming that an IP packet is sent from a source address in VLAN1 to a destination address in VLAN2 througha layer-3 switch, which part of the packet will be changed?

A. Layer 2 TTLB. Layer 3 TTLC. Layer 3 source addressD. Layer 3 destination address



QUESTION 54

You are troubleshooting an issue which is causing full-sized packets entering the MPLS cloud be dropped. Youhave discovered that one of the switches in the MPLS core is not a Cisco switch, but otherwise the MPLS MTUsize is set to 1508 bytes on the routers. Based on this information, which of these may be the reason thepackets are being dropped?

A. The switch on you MPLS core that was not produced by Cisco does not support oversized packetsB. No switches support oversized packetsC. By definition, the maximum MTU is 1500 bytesD. As MPLS VPN labeling increases the size of the packet by 8 bytes, the IP MTU should have been changed

to 1508



QUESTION 55

You are an experienced network administrator in an international company. During your working hours,customers complain that they experience intermittent data loss and they intermittently fail to connect to crucialservers. As shown in the following topology, the 802.1Q trunk between DSW111 and ASW1 fails. Though DSW112 is in the service of HSRP group 11, the SVI for VLAN 11 is up on DSW111. So as to figure out theproblem, which three commands should you issue on DSW111? (Choose three.)

A. show standby vlan 11 briefB. show interfaces vlan 11C. show spanning-tree vlan 11D. show interfaces <fast | gig> mod/port trunk

Correct Answer: BCDSection: (none)Explanation


QUESTION 56Which one of these class maps was configured to match traffic for CS5?

A. CIS 1# show class-map forward Class map match-all forward ( id 3) Match ip dscp 18

B. CIS1#show access-map block Class map match-all block (id 4) Match ip dscp 43

C. CIS1# show class-map real-time Class map match-all block (id 5) Match ip dscp 16

D. CIS 1# show class-map pass Class map match-all real-time (id 2) Match ip dscp 40



QUESTION 57

Which of the following can we draw from the given information concerning the class-map "all-traffic"?

A. The class-map "all-traffic" will match all traffic with ip precedence 4 and 5B. The class-map "all-traffic" will match all traffic with dscp 18 or dscp 43C. The class-map "all-traffic" will match all traffic with ip precedence 0 or 1D. The class-map "all-traffic" will match all traffic with dscp 18 and dscp 43



QUESTION 58

How does NTP help you troubleshoot network problems?

A. By calculating the time offset from the GPS or atomic clockB. By setting the router clock to the default value if the router can't connect to a

time serverC. By setting all network devices to the correct timeD. By setting necessary time date in the timestamp information



QUESTION 59

Which version of NTP was the first to support cryptographic authentication?

A. Version 1B. Version 5C. Version 4D. Version 3



QUESTION 60

Which of these tools should you use to compress VoIP packets on a low-speed Frame Replay circuit?

A. Cisco Proprietary payload compressionB. Predictor payload compressionC. RTP header compressionD. TCP header compression



QUESTION 61

The router SIS-R has been configured in a CIS network. As a network administrator, you were required toenable MPLS on that router. Which of the following description is making sense on the basis of the outputinformation?

A. CEF switching is only needed to forward labeled packets.B. CEF switching is needed on both ingress and egress interfaces on which MPLS is enabled.C. Interface-level CEF switching is needed only on egress interfaces that are sending IP packets on which the

egress LSR performs the label impositionprocess.

D. Interface-level CEF switching is needed only on ingress interfaces that are receiving IP packets on whichthe ingress LSR performs the label impositionprocess.



QUESTION 62

When EIGRP is used as the PE-CE routing protocol which of these statements is correct?

A. EIGRP can be used only as the PE-CE routing protocol if the PE and CE routers are in the same ASB. Other EIGRP AS routes are automatically advertised to the CE router and do not require a redistribution

configuration command to be configuredC. Unlike other routing protocols that are used between PE and CE routers, EIGRP supports backdoor linksD. Configure of the VPN is only required on the PE router



QUESTION 63

When BGP is used as the PE-CE routing protocol, which of these statements is correct?

A. On the CE router, PE neighbors must be configured in the VRF context on the CE routerB. On PE routers, the CE IBGP neighbors are configured in the global BGP configurationC. On PE routers, the CE EBGP neighbors are configured in the VRF contextD. A separate BGP process must be used on the PE routers for CE routers so that they do not use the same

BGP routing process as that used for the PE router's other provider neighbors



QUESTION 64

Refer to the following topology. RIP routing protocol has been configured on Customer Edge and Provider Edgerouters. Which of the following description is making sense on the basis of the given information?

A. Though RIPv2 is specified in the configuration, any version of RIP supports VRFs.B. Though preferred, it is not necessary that the RIP parameters be specified in the VRF.C. On the receiving end, the RIP hop count is copied into a BGP extended community attribute.D. On the sending end, the RIP hop count is copied into the BGP multi-exit discriminator attribute.



QUESTION 65

When implementing MPLS VPNs between CE and PE routers, which of these statements is correct?As a Network Engineer, it is necessary for you to know how to implement MPLS VPNs between CustomerEdge and Provider Edge routers. Refer to the following descriptions, which one is making sense?

A. If using OSPF or EIGRP as the PE-CE routing protocol, redistribution is not required, but any other protocolor static route will require redistribution

B. If using IS-IS as the PE-CE routing protocol, no redistribution is requiredC. If using static routes between the CE and PE routers, no redistribution of other VPN routes is requiredD. If PE-CE protocol is not BGP, redistribution of other VPN routes from MP-BGP is required



QUESTION 66

As a network administrator, you are required to deploy MPLS technology. During the deployment, it isrecommended to apply conditional label advertising. What is most probably the reason for that?

A. to enable label switching on the frame mode interfaceB. to restrict MPLS availability to predefined time periodsC. to restrict end users from seeing the routers in the MPLS networkD. to restrict label switching to a limited number of networksE. to restrict end users from seeing the routers in the MPLS network



QUESTION 67

You are working with CIS .com. who has identified the following IP applications on their network: IP voice andvoice signaling, streaming video, PeopleSoft, Microsoft SQL, e-mail, and Internet traffic. If the voice traffic wasclassified as EF and AF31, the e-mail was classified as AF11, and the Internet traffic was classified as DSCP 0,how would the transactional traffic represented as PeopleSoft and Microsoft SQL be classified?

A. DSCP AF21B. DSCP CS4C. DSCP AF33D. DSCP AF13



QUESTION 68

As an experienced technician, you are responsible forT echnical Support in your company. One of the traineeimplement RIP routing contests in MPLS VPN. How to respond?

A. Routing contexts are implemented in a single routing process.B. Routing contexts are implemented using multiple roubng processes.C. Routing contexts are implemented as a single instance of several routing processes.D. Routing contexts are implemented as several instances of a single routing process.



QUESTION 69

With respect to a computer file system, an access control list (ACL) is a list of permissions attached to anobject. Which of the following makes forwarding decisions in hardware?

A. IETFB. PFCC. TCAMD. ASIC



QUESTION 70

What are two requirements to perform a warm Cisco IOS upgrade on a Cisco ISR router? (Choose two.)

A. at least one enabled Ethernet interfaceB. Cisco IOS version 12.3(2)T or greaterC. enough memory to decompress the new Cisco IOS imageD. internal flash memory equaling two times the space required for the current

Cisco IOS image

Correct Answer: BCSection: (none)Explanation


QUESTION 71

As a Network Engineer, you have to master how to deploy Virtual Storage Area Network and what are theresults of the deployment. Which two of the following are resulting from its deployment?

A. reduced backupB. increased securityC. greater storage demandD. improved availability



QUESTION 72

As an experienced technician, you are responsible for Technical Support in your company. One of the traineesis asking you how to create separate networks on one Storage Area Network so as to provide enhancedavailability, security, etc. Which of the following solution will enable that?

A. Cisco Direct Attached StorageB. Cisco Virtual Attached Storage NetworkC. Cisco Virtual Storage Area NetworkD. Cisco Direct Storage Area Network



QUESTION 73

As a Cisco Network Engineer, you have to master the knowledge of the Cisco Storage Area Network solutionfor the data center. Which three of the following are features of it? (Choose three.)

A. It provides multiprotocol support.B. It allows you to create separate networks on the VSAN.C. It allows you to migrate to new technologies without a complete equipment upgrade.D. It reduces cost and complexity by providing an easy transition to evolving technologies.



QUESTION 74

Onboard USB 1.1 ports of the Cisco 800, 1800, 2800, and 3800 Series ISRs can be used to enable importantsecurity and storage capabilities.

A. TrueB. False



QUESTION 75

As an experienced Network Engineer, you are required to characterize an existing CIS network. In such asituation, what is the last step to take?

A. Perform a network audit.B. Form an impression about the network.C. Use traffic analysis to augment organizational input.D. Prepare and add to the network description.



QUESTION 76

As a Network Engineer in a large-sized company, you have to master the knowledge of the Cisco mobilitysolution. Which of the following statement most appropriately identifies the characteristics of it?

A. It provides high-level integrated security from the wireless access point to the client and automaticallyencrypts voice and data in transit.


B. It allows you to centralize management, automate repetitive tasks, and provision IP services easily.C. It centralizes your infrastructure and allows you to share resources more effectively by combining separate

data centers into an interconnected SAN.D. It authenticates users and devices so that it is impossible for a rogue device to be connected to the network.



QUESTION 77

You are configuring the Cisco IOS Firewall Websense URL Filtering feature set on a Cisco 3800 Series ISR.What would the Cisco IOS command ip urlfilter exclusive-domain permit www.cisco.com do?

A. Specifies the URL for the location of the Firewall Websense URL filtering server.B. Specifies the only domain for which traffic should be allowed.C. Specifies the domain for which the firewall should permit traffic without sending lookup requests.D. Specifies that the designated domain receives exclusive traffic priorities.



QUESTION 78

As an experienced network administrator, you are asked to troubleshoot a QoS problem. In which way mightthe Cisco NetFlow be helpful during the troubleshooting process?

A. NetFlow can discover the protocols in use and automatically adjust QoS traffic classes to meet policy-maprequirements.

B. NetFlow records can be used to understand traffic profiles per class of service for data, voice, and videotraffic.

C. NetFlow can be configured to identify voice and video traffic flows and place them into a low-latency queuefor expedited processing.

D. NetFlow can report on the number of traffic matches for each class map in a configured QoS policyconfiguration.



QUESTION 79

How many subnets are possible in an enterprise that has just been assigned an IPv6 prefix by itsISP?

A. 65536B. 256C. 1024D. 16777216



QUESTION 80

As a network administrator, you are required to configure a switch port for a private Virtual LAN. In such asituation, which three of the following connection modes will be available during the configuration process?(Choose three.)

A. isolated modeB. modular modeC. community mode D. promiscuous modeE. non-isolatedF. permanent



QUESTION 81

Which three of these items are found within the router advertisement message of IPv6 stateless

autoconfiguration? (Choose three.)

A. flags indicating the kind of autoconfiguration that can be done by hostsB. default router informationC. /64 prefix that can be used on the link and the lifetime of the prefixD. IPv6 DHCP server address information

Correct Answer: ABCSection: (none)Explanation


QUESTION 82

You are working with a client to classify the different types of application traffic they will have on their networkand to assign a QoS value to each traffic flow. The client has identified the following applications: Internettraffic, Oracle, network-based backups, AOL Instant Messenger, IP routing, voice, and voice signaling. Giventhese types of applications, how many different classes will need to be configured in QoS?

A. 8B. 6C. 9D. 5



QUESTION 83

CIS .com recently acquired a smaller competitor. The acquired company is not currently using Cisco routers, soyou have connected the two WANs via an authenticated PPP link. After configuration both routers, issuing theshow interface s0/0 command on the Cisco Router shows the interface to be in the up/down state. Which twoof these are possible causes? (Choose two.)

A. Bandwidth statements do not matchB. MTUs do not matchC. IP Addresses are not in the same subnetD. CHAP passwords do not match



QUESTION 84

What is the purpose of IP Event Dampening?

A. to configure a subinterface so that it can be applied to the primary interface in order to prevent exponentialselective dampening

B. to suppress the effects of excessive interface flapping events on routing protocols and routing tables in thenetwork

C. to introduce a nonconfigurable exponential delay mechanismD. to allow the network operator to configure a router to automatically dampen and selectively identify a local

interface that is failing



QUESTION 85

Which two of the following actions must an OSPF NSF-capable router execute after a supervisor engineswitchover? (Choose two.)

A. Re-learn the available OSPF neighbors with neighbor relationship restartB. Send the graceful restart messageC. Re-acquire the link state database content for the networkD. Re-learn the available OSPF neighbors without neighbor relationship restart

Correct Answer: CDSection: (none)Explanation


QUESTION 86

What is a new feature of the Cisco ISR router?

A. advanced integration moduleB. FICON portsC. Cisco CallManager 5.0 supportD. warm Cisco IOS upgrade feature



QUESTION 87

You are working with a client to deploy QoS on their Frame Relay WAN. They would like to be able to allowpackets to cross the Frame Relay WAN but have them marked as discard eligible if they exceed the QoSpolicy. How would you accomplish this task?

A. Configure a class map that sets the DE bit so that the policy map can correctly apply a violate-action if thepolicy is exceeded.

B. Configure a service policy that sets the DE bit and apply it to the serial interface connected to the FrameRelay WAN.

C. Configure a policy map that has a burst-max action of setting the DE bit if the policy is exceeded.D. Configure a policy map that has a violate-action to change the DE bit from 0 to 1.



QUESTION 88

In comparison with traditional Layer 2 and Layer 3 system, Cisco Catalyst 6500 Virtual Switching System (VSS)1440 simplifies a network by the means of:

A. providing loop-free technology.B. providing HSRP/VRRP.C. managing additional routing peers.D. managing two nodes and configuration.



QUESTION 89

Which of these commands can you use to show if an operational Catalyst switch port is set for autonegotiationof speed and duplex when running Cisco IOS software?

A. show port network <interface>B. show running-configC. show controllers Ethernet-controller <interface>D. show interfaces <interface>



QUESTION 90

Which three of the following are components of a syslog message? (Choose three.)

A. time stampB. error codesC. severity levelD. log message name



QUESTION 91

Which keyword is used with the debug ipv6 [keyword] command to troubleshoot neighbor discovery problems?

A. transactionB. icmpC. discoveryD. nd



QUESTION 92

Which description is making sense on the basis of the given information?router bgp 65000bgp log-neighbor-changesneighbor 10.11.1.187 remote-as 65001neighbor 10.11.1.187 update-source loopback 0bgp graceful-restart

A. BGP NSF Awareness is enabledB. 10.11.1.187 is configured as an NSF-capable BGP neighborC. BGP gracerful restart awarness is enabledD. SSO for BGP NSF capability is enabled



QUESTION 93

Which command displays only those entries in a BGP table with specific AS_PATH attributes?

A. show ip bgp inconsistent-asB. show ip bgp pathsC. show ip bgp community-list D. show ip bgp regexp



QUESTION 94

Which keyword is used with the show ip bgp neighbors [keyword] command to display all routes that arereceived and accepted from a neighbor?

A. pathsB. accepted-routesC. advertised-routesD. routes



QUESTION 95

Which command is used to view IPv6 parameters related to the BGP process?

A. show ip bgp ipv6B. show protocols ipv6C. show ipv6 bgpD. show bgp ipv6



QUESTION 96

Which Cisco IOS command is used to troubleshoot a problem in which a BGP session stays in the active state?

A. debug ip bgp updatesB. debug ip tcp eventsC. debug ip bgp transactionsD. debug ip tcp transactions



QUESTION 97

What is the most likely reason that an IBGP route that has been selected as a best route is not entered into the

IP routing table?

A. Route reflectors are not passing updates properly.B. BGP synchronization has been enabled.C. The next-hop address is unreachable.D. No loopback interface has been configured on a router.



QUESTION 98

As a network administrator, you issue the interface auto qos voip cisco-phone command on a port in an edgenetwork. It is possible for a Cisco Catalyst switch to check if a Cisco IP Phone is directly attached to that portby:

A. using DHCP snoopingB. snooping the incoming 802.1Q VLAN tagC. using CDPD. snooping the CoS marking on the incoming frames



QUESTION 99

What is the maximum number of Cisco Catalyst 3750 Series Switches that can be united into a singlemanageable unit using the Cisco StackWise technology?

A. 9B. 3C. 12D. 6



QUESTION 100

What is the function of the no switchport catalyst switch interface configuration command?

A. Disables the interfaces to prevent traffic flowB. Clears all the configurations on the interface

C. Switches the port from access mode to trunk modeD. Converts the port from physical Layer 2 port to physical Layer 3 port



QUESTION 101

As an experienced network engineer, you are asked to troubleshoot a CIS network outage. During thetroubleshooting process, you notice that one of your colleagues connects additional devices to the network withthe use of his own switch. With the purpose of improving speed, the switch is attached to both network ports inan office, which leads to bridge loop. Enabling which of the following feature will be able to prevent this problemfrom happening again?

A. GLBPB. RSTPC. BPDU guardD. root guard



QUESTION 102

In a RSTP implementation, which of the following two link types are used? (Choose two.)

A. SharedB. Point-to-PointC. DesignatedD. Multiaccess non-broadcast

Correct Answer: ABSection: (none)Explanation


QUESTION 103

In a high-availability network, which command, when placed on ports that have connected end stations, willallow you to prevent delays in service for end stations by placing a port in blocking mode?

A. enable backbone fastB. enable uplink fastC. disable portfastD. enable portfast



QUESTION 104

Which two statements are correct in verifying SPFv3 IPv6 routing configurations? (Choose two.)

A. OSPFv3 is enabled per-link, not per-network.B. When configuring a broadcast interface, OSPFv3 requires a list of OSPFv3 neighbors to be manually

configured.C. OSPFv3 requires router to be running CEF.D. OSPFv3 router ID is now 128 bits instead of 32 bits.



QUESTION 105

Which configuration will enable OSPF for IPv6 on FastEthernet 0/0/0?

A. interface FastEthernet0/0/0 ipv6 address 2001:0db8:0:0:l::/64 eui-64 ipv6 enable!router ospf 1 router-id 10.11.11.1 network 2001:0db8:0:0:l::/64 area 1

B. interface FastEthernet0/0/0 ipv6 address 2001:0db8:0:0:l::/64 eui-64 ipv6 enable ipv6 ospf 1 area 1 !router ospf 1 router-id 10.11.11.1

C. interface FastEthernet0/0/0 ipv6 address 2001:0db8:0:0:l::/64 eui-64 ipv6 enable ipv6 ospf 1 area 1 !ipv6 router ospf 1 router-id 10.11.11.1

D. interface FastEthernet0/0/0 ipv6 address 2001:0db8:0:0:l::/64 eui-64 ipv6 enable!ipv6 router ospf 1 router-id 10.11.11.1 network 2001:0db8:0:0:l::/64



QUESTION 106

Which three of these items are IPv6 transition mechanisms? (Choose three.)

A. ISATAPB. NATV6C. manually configured overlay tunnelsD. dual stack configurations



QUESTION 107

What are four advantages to using tunnel brokers in an IPv6 transition environment?

A. Tunnel brokers automatically provide configuration parameters to peer routers. B. IPv6 enabling a node looks automatic to the end user.C. Tunnel information is sent via IPv4.D. Tunnel brokers make it simpler for nontechnical users to deploy manual tunnels.

Correct Answer: ABCDSection: (none)Explanation


QUESTION 108

Which of the following is an easy-to-use tool that allows you to easily configure and monitor Cisco IntegratedServices Routers?

A. Cisco NAC ApplianceB. Cisco SDMC. Cisco MWAMD. Cisco Unified Communications Manager Express



QUESTION 109

Which of the following allows network administrators to easily apply common services and employ featuresacross Cisco switches, routers, and access points with an intuitive GUI?

A. Cisco IPSB. Cisco Network AssistantC. Cisco VAM2+D. Cisco SDM



QUESTION 110

You have just reinstalled a VIP 6-80 in a Cisco 7500 Series router. What must you do to bring up the portadapter interfaces?

A. All interfaces are online by default once the VIP is up and running normally.B. All interfaces must be manually brought online, even those previously configured.C. The previous VIP configuration must be reloaded to bring interfaces online.D. Any interfaces not previously configured must be manually configured and brought online.



QUESTION 111

You are an experienced network administrator in an international corporation. One of your clients asks you toconfigure a network for a financial trading center which requires multiple high-value transactions. And thetransactions are very important to the client. In such a situation, which two of the following are basic and mostimportant requirements concerning the configuration? (Choose two.)

A. no single point of failureB. determine which protocol to useC. trading database server locationD. deterministic response to all failures

Correct Answer: ADSection: (none)Explanation


QUESTION 112

As an experienced technician, you are responsible for Technical Support in your company. One of the traineesis asking you which Cisco VPN Acceleration Module for Cisco 7200 Series routers and the Cisco 7301 provideshigh-performance encryption/compression and supports the latest encryption standard. Which of the followingwill answer his question?

A. AESB. Cisco IPSC. Cisco Network AssistantD. Cisco VAM2+



QUESTION 113

You are an experienced network administrator in an international corporation. During your working hours, youare asked to deploy the Cisco SSL VPN AIM module in a Cisco 1800 Series Router. The beneficial reason forthat deployment is to:

A. improve performance up to 300% for both IPsec and SSL VPN applicationsB. improve performance for both IPsec and SSL VPN applications with IPsec encryption taking place in

hardwareC. improve performance up to 300% for both IPsec and SSL VPN applications with SSL encryption taking

place in hardwareD. improve performance up to 200% for both IPsec and SSL VPN applications with encryption taking place in

hardwareE. improve performance exclusively for SSL VPN applications



QUESTION 114

What is the purpose of using VPN hardware acceleration equipment?

A. To offload encryptions functions from router memoryB. To use WebVPN instead of IPSecC. To decrease performance and efficiencyD. To offload encryption functions from a router CPU



QUESTION 115

With a VPN Accelerator Module 2+ (VAM2+) installed in a Cisco 7200 series router, what will be the resultingaction when entering the command no crypto engine accelerator slot number?

A. disables OIR on the VAM2+ moduleB. removes the VAM2+ crypto engine feature and disables the associated configuration commands from the

routerC. disables dual VAM2+ hardware stateful failover capabilitiesD. disables the crypto engine hardware acceleration, resulting in all crypto functions to be performed in

software



QUESTION 116Refer to the exhibit. For the given configuration, on packets leaving the router on interface FastEthernet0/0 thatmatches the high traffic class, what will the MPLS experimental bit be set to?

A. 0B. 1C. 2D. 3E. 4F. 5



QUESTION 117

Refer to the exhibit. Which two of these events will be the result of issuing the above command? (Choose two.)

A. 64-bit IPv4 prefix will be created.B. The route distinguisher will be used to indicate VPN membership.C. Extended BGP communities will be used to encode route distinguishers.D. A 96-bit VPNv4 prefix will be created and propagated across the IP network.E. The route distinguisher is 64 bits and will be prepended to an existing IPv4 route to make it globally unique.

Correct Answer: DESection: (none)Explanation


QUESTION 118Refer to the exhibit. You want to minimize the downtime that results from supervisor engine switchovers onCisco 6500 Series Switches and Cisco 7600 Series Routers. To achieve this, you are considering deploying aCisco Nonstop Forwarding with Stateful Switchover solution using OSPF.

In the exhibit you can see the output of the show ip ospf neighbor detail command. Which trait of systems usingCisco Nonstop Forwarding with Stateful Switchover and OSPF is shown in the exhibit output and will impactyour plan?

A. Stateful Switchover for Cisco Nonstop Forwarding only works with BGP.B. Stateful Switchover for Cisco Nonstop Forwarding must be configured on all adjacent routers.C. Cisco Nonstop Forwarding with Stateful Switchover helper mode is not supported on the adjacent router. D. Cisco Nonstop Forwarding with Stateful Switchover helper mode for OSPF has been

promiscuousstandardized and is supported on the adjacent router.



QUESTION 119Refer to the exhibit. Which show command would display the information in the exhibit?

A. show policy-mapB. show policy-map high-priorityC. show interfaces fastEthernet 0/1 policy-mapD. show policy-map interfaces fastEthernet 0/1



QUESTION 120What would the first line in this debug serial interface output indicate?

A. The mineseen HDLC sequence has missed more than three keepalivesB. Keepalives are being received from the other end of a point-to-point link and this end is not sending them.C. The yourseen HDLC sequence number is out of order.D. The HDLC myseq has missed more than three keepalive messages, the WAN link keepalive activity will not

occur, and you should expect to see a Layer 2 issue.



QUESTION 121Refer to the exhibit. Which two of these statements are correct? (Choose two.)

A. PE11 originated label 20.B. PE11 originated label 21.C. ThePE11 upstream neighbor originated label 21.D. The PE11 downstream neighbor originated label 20.E. PE11 will append label 21 to incoming packets labeled 32.F. PE11 will impose label 20 on incoming packets labeled 32.



QUESTION 122Refer to the exhibit. You have a non-Cisco switch that is not communicating properly while connected to thedistribution-layer Cisco switching fabric. Which two best-practice actions can you take to overcome thisproblem? (Choose two.)

A. Turn off MST (802.1s) on all switches.B. Turn on MST (802.1s) on all switches.C. Turn on RSTP (802.1w) on all switches.D. Turn off RSTP (802.1w) on all switches.

Correct Answer: BDSection: (none)

Explanation


QUESTION 123Refer to the exhibit. In analyzing the configuration of the router, which three of these statements are correct?(Choose three.)

A. Neighbor 172.16.32.14 will receive VPNv4 routes.B. Neighbor 172.16.32.15C. Neighbor 172.16.32.15D. Neighbor 172.16.32.27E. Neighbor 172.16.32.27F. Neighbor 172.16.32.14

Correct Answer: CDESection: (none)Explanation


QUESTION 124Referring to the partial Cisco Catalyst switch configuration shown, which two of these statements are correct?(Choose two.)

A. A router connected to the fastethemet 1/4 interface will be able to communicate with hosts connected tointerface fastethemet 1/1,1/2, and 1/3.

B. A router connected to the fastethemet 1/4 interface will not be able to communicate with the host connectedto interface fastethemet 1/3.

C. Hosts connected to interface fastethemet 1/1 and 1/2 can communicate with each other.D. Hosts connected to interface fastethemet 1/1,1/2, and 1/3 can communicate with each other.



QUESTION 125Refer to the exhibit. Analyze the two traceroutes that are displayed. Which of these statements is correct indescribing what most likely caused the traceroute differences?

A. Do not fragment has been configured on PE11.B. MPLS has been disabled on routers P11 and P12.C. An access list has been created on P11 to block traceroutes from PE11.D. The no mpls ip propgate-ttl local command has been configured on PE11E. ICMP has been disabled on the intermediary routers between PE11 and PE12.



QUESTION 126

On the Catalyst 6500 Series switch, which command is used to establish a console connection to the FirewallServices Module?

A. sshB. connectC. loginD. session



QUESTION 127When a Cisco router is configured for SSH, it acts as an _______ ?

A. SSH clientB. SSH proxyC. SSH serverD. SSH and SSL server



QUESTION 128You are trying to initiate an SSH connection to a remote router and are getting rejected with an error code of 0.Which of these might be the cause of the error?

A. The routers are using different SSH versions.B. You are trying to log in using invalid credentials.C. The RSA key pair is not properly configured on the SSH client.D. The RSA key pair is not properly configured on the SSH server.



QUESTION 129Refer to the exhibit. Which SSH sessions will the SSH server accept?

A. version 1 onlyB. version 2 onlyC. versions 1 and 2D. all versions before 1.99









QUESTION 131









A. 0B. 1C. 2D. 3E. 4F. 5







QUESTION 134Refer to the exhibit. Analyze the two traceroutes that are displayed. Which of these statements is correct indescribing what most likely caused the traceroute differences?

A. Do not fragment has been configured on PE11.B. MPLS has been disabled on routers P11 and P12.C. An access list has been created on P11 to block traceroutes from PE11.D. The no mpls ip propgate-ttl local command has been configured on PE11E. ICMP has been disabled on the intermediary routers between PE11 and PE12.







QUESTION 136You are operating a multi-vendor network and are considering adding redundancy at the access level. Whichrouting redundancy solution should you implement?

A. Both Gateway Load Balancing Protocol and Hot Standby Router ProtocolB. Gateway Load Balancing ProtocolC. Virtual Router Redundancy ProtocolD. Hot Standby Router Protocol

Correct Answer: CSection: (none)

Explanation


QUESTION 137Refer to the exhibit. What is the HSRP state and priority of this interface after HSRP reaches its steady state?

A. Active, Priority 151B. Active, Priority 201C. Active, Priority 251D. Standby, Priority 151E. Standby, Priority 201F. Standby, Priority 251



QUESTION 138

Which of the following is an easy-to-use tool that allows you to easily configure and monitor Cisco IntegratedServices Routers?

A. Cisco NAC ApplianceB. Cisco SDMC. Cisco MWAMD. Cisco Unified Communications Manager Express




A. 0B. 1C. 2D. 3E. 4F. 5




A. Neighbor 172.16.32.14 will receive VPNv4 routes.B. Neighbor 172.16.32.15C. Neighbor 172.16.32.15D. Neighbor 172.16.32.27

E. Neighbor 172.16.32.27F. Neighbor 172.16.32.14











Correct Answer: DSection: (none)

Explanation


QUESTION 143

As an experienced technician, you are responsible for Technical Support in your company. One of the traineesis asking you which Cisco VPN Acceleration Module for Cisco 7200 Series routers and the Cisco 7301 provideshigh-performance encryption/compression and supports the latest encryption standard. Which of the followingwill answer his question?

A. AESB. Cisco IPSC. Cisco Network AssistantD. Cisco VAM2+







QUESTION 145









A. Neighbor 172.16.32.14 will receive VPNv4 routes.B. Neighbor 172.16.32.15C. Neighbor 172.16.32.15D. Neighbor 172.16.32.27E. Neighbor 172.16.32.27F. Neighbor 172.16.32.14







QUESTION 148

On the Catalyst 6500 Series switch, which command is used to establish a console connection to the FirewallServices Module?


A. sshB. connectC. loginD. session

Correct Answer: D

Section: (none)Explanation







A. 0B. 1C. 2D. 3E. 4F. 5







CertifyMe - GRATIS EXAM · 2019-11-09 · As a Cisco Network Engineer, you have to master the...

Documents

Transcript of CertifyMe - GRATIS EXAM · 2019-11-09 · As a Cisco Network Engineer, you have to master the...