Certificate of Accreditation - PRA World€¦ · PRA World Ltd Testing Laboratory No. 9943 Is...
Transcript of Certificate of Accreditation - PRA World€¦ · PRA World Ltd Testing Laboratory No. 9943 Is...
PRA World Ltd
Testing Laboratory No. 9943
Is accredited in accordance with International Standard ISO/IEC 17025:2017– General Requirements for the competence of testing and calibrationlaboratories.
Initial Accreditation: November 8, 2017Certificate Issued: December 9, 2019
This accreditation demonstrates technical competence for a defined scope specified in theschedule to this certificate, and the operation of a management system (refer jointISO-ILAC-IAF Communiqué dated April 2017). The schedule to this certificate is an essentialaccreditation document and from time to time may be revised and reissued.
The most recent issue of the schedule of accreditation, which bears the same accreditationnumber as this certificate, is available from www.ukas.com.
This accreditation is subject to continuing conformity with United Kingdom AccreditationService requirements.
Certificateof Accreditation
UKAS is appointed as the sole national accreditation body for the UK by The Accreditation Regulations 2009 (SI No 3155/2009) and operatesunder a Memorandum of Understanding (MoU) with the Department for Business, Energy and Industrial Strategy (BEIS).
Chief Executive OfficerMatt Gantley,United Kingdom Accreditation Service
Scan QR Code toverify
Assessment Manager: DC1 Page 1 of 3
Schedule of Accreditation issued by
United Kingdom Accreditation Service
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
9943
Accredited to ISO/IEC 17025:2017
PRA WORLD LIMITED
Issue No: 004 Issue date: 06 August 2019
Nottingham Road
Melton Mowbray
Leicestershire
LE13 0PB
Contact: Dr Laura Pilon
Tel: +44 (0) 1664 501 212
E-Mail: [email protected]
Website: www.pra-world.com
Testing performed at the above address only
DETAIL OF ACCREDITATION
Materials/Products tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
PAINTS, VARNISHES and SIMILAR MATERIALS
Physical Tests
Adhesion
BS 3900-E6 ISO 2409 - 2013
Assessment of Blistering
BS 3900-H2 ISO 4628/2 - 2016
Assessment of Chalking
BS 3900-H6 ISO 4628/6 - 2007
Assessment of Cracking
BS 3900-H4 ISO 4628/4 - 2016
Assessment of Flaking
BS 3900-H5 ISO 4628/5 - 2016
Assessment of Rusting
BS 3900-H3 ISO 4628/3 - 2016
Assessment of degree of
delamination and corrosion around a scribe or other artificial defect
BS 3900-H8 ISO 4628/8 - 2012
Chip Resistance
BS Au 148:Part 15 (withdrawn) - 1969
Colour Comparison
BS 3900-D9 ISO 7724-2 - 1984
Film Thickness
BS 3900-C5 ISO 2808-meth-7C - 2007
Film Thickness
BS 3900-C5 ISO 2808-meth-7D - 2007
9943
Accredited to
ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
PRA WORLD LIMITED
Issue No: 004 Issue date: 06 August 2019
Testing performed at main address only
Assessment Manager: DC1 Page 2 of 3
Materials/Products tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
PAINTS, VARNISHES and SIMILAR MATERIALS (cont’d)
Physical Tests (cont’d)
Flexibility
BS 3900-E1 ISO 1519 - 2011
Hardness BS 3900-E2
ISO 1518 -2 - 2011 Hardness
BS 3900-E19 ISO 15184 - 2012
Impact Resistance
BS 3900-E13 ISO 6272 – 1 - 2011
Opacity BS 3900-D4:2006
BS EN ISO 2814 - 2006
Resistance to Liquids/Stain
Resistance BS 3900-G5 ISO 2812/1 - 2007
Overbake Resistance ASTM D2454 - 2014 Xenon Arc Exposure ISO 11341 – 2004 (withdrawn)
Natural Weathering ISO 2810 - 2004
Resistance to Water Immersion BS 3900-G8
ISO 2812/2 - 2012 Humidity ASTM D2247 - 2011 Salt Spray
BS 3900-F12 ISO 7253 – 2001 (withdrawn)
Salt Spray ISO 9227 - 2017 Sulphur Dioxide
BS 3900-F8 ISO 3231 – 1998 (withdrawn)
Wet Scrub Resistance BS EN ISO 11998 - 2006
Spreading Rate BS EN ISO 6504-3 - 2007 Resistance to liquids BS EN ISO 2812-3 - 2012 Adhesion – Pull off BS EN ISO 4624 - 2016
9943
Accredited to
ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
PRA WORLD LIMITED
Issue No: 004 Issue date: 06 August 2019
Testing performed at main address only
Assessment Manager: DC1 Page 3 of 3
Materials/Products tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
PAINTS, VARNISHES and SIMILAR MATERIALS (cont’d)
Physical Tests (cont’d)
Taber Abrasion BS EN ISO 7784-2 – 2016
QUV Weathering BS EN ISO 11507 – 2007
(withdrawn)
Water Vapour Permeability BS EN ISO 7783 - 2011 Liquid Water Permeability BS EN 1062-3 - 2008 Gloss value at 20 degrees, 60
degrees and 85 degrees BS EN ISO 2813 - 2014
END