Certificate No: EW29C - LABC
5
Photo/isometric drawing provided by manufacturer Roger Bullivant Limited In-situ Thermaslab Sub-Floor System Description of Product Roger Bullivant Limited In-situ Thermaslab Sub-Floor System is a cast in-situ ribbed concrete floor. Key Factors Assessed Mechanical Resistance & Stability Validity This certificate was first issued on 8 th December 2011 and is valid until 8 th December 2021 Issue Dated 22 nd November 2018 Certificate No: EW29C
Transcript of Certificate No: EW29C - LABC
Photo/isometric drawing
provided by manufacturer
Roger Bullivant Limited In-situ Thermaslab Sub-Floor System
Description of Product
Roger Bullivant Limited In-situ Thermaslab
Sub-Floor System is a cast in-situ ribbed
concrete floor.
Key Factors Assessed
Mechanical Resistance & Stability
Validity
This certificate was first issued on 8th December 2011 and is valid until 8th December 2021
Issue Dated 22nd November 2018
Certificate No: EW29C
This Registered Detail relates to the In- situ Thermaslab Sub-Floor System. It is a cast in-situ ribbed concrete floor designed
to carry floor and internal wall loads at ground floor level in domestic buildings, using polystyrene permanent formwork.
The system is for use solely with the Roger Bullivant Tee Beam systems.
The design shown and materials specified shall not be changed without reference to the local authority responsible for certifying
the system.
Where reference is made to any Code of Practice, British Standard or manufacturer’s instructions it shall be construed as a
reference to such publication in the form in which it is in force at the date of this certificate.
LABC consider that, Roger Bullivant Limited In-situ Thermaslab Sub-Floor System, will meet the
functional requirements of the Building Regulations (listed below) if the criteria detailed in this
certificate are met;
The Building Regulations 2010 (as amended) England & Wales
AD A Structure
Note: The system meets this Requirement subject to limitations detailed in Conditions
section.
The Building Regulations 2010 (as amended) England
None presently
The Building Regulations 2010 (as amended) Wales
None presently
The Building (Scotland) Regulations 2004 (as amended)
If you would like to discuss a specific use of the product in Scotland it will require an additional
assessment under the Scottish Building Regulations and accordingly you should contact the LABSS
STAS Administrator at www.labss.org
LABC Warranty
The use of the Roger Bullivant Limited In-situ Thermaslab Sub-Floor System has not been assessed
to meet the requirements of the LABC Warranty Technical Manual. If you would like to discuss a
specific use please make an enquiry to [email protected]
Drawings RBCITS/CS01 (14mm bar)
RBCITS/CS02 (12mm bar)
RBCITS/CS03 (10mm bar)
RBCITS/SP1 (Section Properties)
RBCITS/SH1 (Service Holes)
RBCITS/CD03 – 24
RBCITS/CD25 – 43
BBA Certificate number 04/4190, issued 24 December 2004
Roger Bullivant Limited In-situ Thermaslab Sub-Floor System Design Manual 1999
Product Conformity Certification, UK Certification Authority for Reinforcing Steels, certificate number 920601, 01.01.2002-
31.12.2002
Product Conformity Certification, UK Certification Authority for Reinforcing Steels, certificate number 0141, 01.01.2002-31.12.2002
Thermaslab Structural Calculations, job reference CITS, Nov 02
Thermal Calculations, job ref: CITS, Dec 02
Test Report on Thermodeck flooring panels, Version 1.003, issued Jan 2002
Roger Bullivant Limited Load Test, 15.01.2002 and 07.03.2002
Roger Bullivant Limited Quality Assurance, Form WP/01/F4, Iss 2 Rev 0
Roger Bullivant Limited
RB Walton Park
Hearthcote Road
Swadlincote
Derbyshire
DE11 9DU
Tel: 01332 977300
Email: [email protected]
Web: www.roger-bullivant.co.uk
