Centro Trac Systems Centro Trac - Oil Rubbed Bronze Finish

415-504-3536

415-504-3536 TG22 6/17 • • teganlighting.com 1info@teganlighting.com •

Category: Oil Rubbed Bronze Centro Straight and Custom Curved Trac is a 12VAC (only) system using two conductors constructed out of solid brass with an elegant bronze finish. It can form complex shapes using the comprehensive range of hardware available. The Twist & Click system allows the luminaires to be easily removed for cleaning or relamping. The luminaires click into the connector, the threaded jacket then screws into position to lock the connection in place. Once fixed, the luminaires are free to rotate or alternatively, can be secured in place using two locking pins.

Material: Solid brass conductors. Solid and plated Mounting, Spots and Accessories. Finish: Oil Rubbed Bronze Finish (BRZ). Important note: The BRZ finish is a hand rubbed finish and the dyes are also hand mixed. As a result, there will be minor color variations from part-to- part within an order and/or batch to batch. In addition, as with all bronze finishes, (without a top coat) it can change color as it ages.

System: Centro Trac 8’ in Oil Rubbed Bronze (CT8-BRZ). Centro End Cap - Black (CEC-BLK). Square tube construction. 8’ (2.4m) Standard lengths. Field cuttable or can be cut by the factory. Contact factory for Curved Bronze Trac.

Mounting: Centro Ceiling Anchor (CCA-BRZ), Centro Ceiling Anchor – Cable (CCAC-BRZ), Centro Universal Anchor (CUA-BRZ), Centro Wall Mount Power Feed (CWMPF-BRZ),Centro Ceiling Anchor – 6’ (1.8m) Stem (CCAS-6-BRZ), Oil Rubbed Bronze Trac, due to its weight, requires structural support every 24” (.61m). May require more on curved Trac.

Custom Contact factory.Curved Trac:

Span: Maximum span between supports is 24” (.61m). Maximum run per circuit is 25’ (7.6m)

Couplers: Centro Coupler (CC-BRZ).

Spot Centro Trac Connector (CTC-BRZ), Centro 90° Connector (C90C-BRZ). Connectors are usedConnectors: with Spotlight as specified (Spot Connector is specified separately). Isolator: Centro Isolator - Black (CI-BLK).

Power Feeds: Centro Power Bolts (CPB-BRZ), Centro Power Canopy - 8’ (2.4m) Power Cable (CPC-BRZ), Centro Single Feed Canopy (CSFC-BRZ).

Spots: Claro (Claro-BRZ), Tiro with Short Glare Shield (Tiro-SGS-BRZ), Tiro with Frit Glass Shield - (Tiro- FGS-BRZ).

Accessories: 72” Spot Extension (SpotExt72-BRZ), Universal Slope Ceiling Adapter (USCA-BRZ).

Electrical: 300W Max. per circuit. NOTE: Centro Trac is 12VAC for MR-16 LED or Halogen (only). NOTE: For dimming LED MR-16 lamps (Soraa) with 12VAC transformers, please refer to our MR-16 LED Specsheet.

Power Supply: Refer to 12VAC Electronic Transformer Specsheet or 12VAC Magnetic Transformer Specsheet for Power Supply options.

Installation: Refer to Installation Instructions for details. For system layout, and specification assistance, refer to the Trac Design Guide under the Gallery link.

Centro Trac Systems Centro Trac - Oil Rubbed Bronze Finish

415-504-3536

415-504-3536 TG22 6/17 • • teganlighting.com 2info@teganlighting.com •

Centro Trac Bronze Example:TG - CT8 - BRZ/2 - CCA - BRZ/3 - CC - BRZ/2 - CI-BLK/0 - CTC - BRZ - CLARO - BRZ - /3 - SpotExt72 - BRZ /3 - CPB - BRZ/2 - CEC-BLK/2 - (Select Power Supply)

Tegan

CentroTrac/

Quantity1,3,5,9

MountingHardware/

Quantity3,6Coupler/Quantity3

Isolator/Quantity3

Power Feeds2/Quantity3

Trac Accessory/Quantity3,4

TG CT8-BRZ/

CCA-BRZCCAC-BRZCCAS-BRZCUA-BRZ

CC-BRZ/ CI-BLK/ CPB-BRZCPC-BRZCSFC-BRZ

Notes: 1 Centro Trac is supplied in 8’ (2.4m) lengths (field-cuttable). Specify quantity of 8’ lengths after slash. 2 For power supply, specify separately. Refer to 12VAC Electronic Transformer Specsheet or 12VAC Magnetic Transformer Specsheet for more detail. 3 List quantity of components required for a complete system. Specify after slash. 4 Required for proper electrical operation. 5 For custom factory curved Trac, see page 2 for details. Contact factory for a quote and lead-time.6 Oil Rubbed Bronze Trac, due to its weight, requires structural support every (.61m) 24”. May require more on Curved Trac.7 Connectors are used with Spotlight as specified (Spot Connector is specified separately).8 See page 7 for additional Spot accessories.9 Maximum Trac run per circuit is 25’ (7.6m).

CEC-BLK

Spot/Quantity3

SpotAccessory/Quantity3,8

CLARO-BRZTIRO-SGS-BRZTIRO-FGS-BRZ

Spot Connector/Quantity3.7

CTC-BRZC90C-BRZ

SpotExt72-BRZ

Power Supply(s)2

Refer to Power Supplies

12VAC Electronic Transformer Spec-sheet or 12VAC Mag-netic Transformer Specsheet

IP 12VAC 300WMAX LED HALOGEN

MR-16 LED

Labels: ETL & CE Listed; Tested to UL 1574 - Issue: 2004/09/07 Ed: 3 Rev:2012/01/25 UL Standard for Safety Track Lighting Systems. IP20. Interior use only. In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials. Technical specification sheets that appear on teganlighting.com are the most recent version and supersede all other versions that exist in any other printed or electronic form. 3 Year Warranty.

Centro Trac Systems Centro Trac - Oil Rubbed Bronze Finish

415-504-3536

415-504-3536 TG22 6/17 • • teganlighting.com 3info@teganlighting.com •

Centro System - Oil Rubbed Bronze

Solid brass conductors with a elegant bronze finish. Square tube construction. Field cuttable or can be cut at factory. Oil Rubbed Bronze (BRZ) finish. 8’ (2.4m) Standard length. Maximum span between supports: 2’ (.61m). Maximum total run: 25’ (7.6m). 300W Max at 12VAC. Surface Mount or Remote Power Supply. Refer to Installation Instructions for details.

17mm(11/16”)

8mm(5/16”)8mm

(5/16”)

17mm(11/16”)

Centro Trac 8’ (CT8-BRZ)

Centro End Cap(CEC-BLK)

Centro Power Canopy(CPC-BRZ)

Centro Ceiling Anchor (CCA-BRZ) Centro

Coupler (CC-BRZ)

Centro Single Feed Canopy(CSFC-BRZ)

Centro Isolator (CI-BLK)

Centro Ceiling Anchor Cable(CCAC-BRZ)

Centro Ceiling Anchor Stem (CCAS-BRZ)

Centro Power Bolt (CPB-BRZ)

Centro Trac - Mounting Example

Centro Trac - Mounting

Ceiling Mount Anchor for Centro Trac. Oil Rubbed Bronze (BRZ)finish. Mount Ceiling Anchor every 24” (.61m), (min.). Supplied withisolating washer. Refer to Installation Instructions for details.

Ceiling Anchor - Stem for ceiling mount Centro Trac with field cuttable rigid stem. Can also be factory cut. Oil Rubbed Bronze (BRZ) finish. Supplied with 6’ (1.8m) of rigid stem and with an isolating washer. Mount Ceiling Anchor every 24” (.6m), (min.). Contact factory for custom lengths; overall length must be specified in feet. Refer to Installation Instructions for details.

Ceiling Anchor - Cable for ceiling mount Centro Trac with aircraft cable. Oil Rubbed Bronze (BRZ) fin-ish. Supplied with 8’ (2.4m)of cable and an isolating washer. Field adjustable. Mount Ceiling Anchor every 24” (.6m), (min.). Recommended for sloped ceiling applications. Refer to Installation Instructions for details.

Centro Ceiling Anchor (CCA-BRZ) Centro Ceiling Anchor - Stem (CCAS-6-BRZ) Centro Ceiling Anchor -Cable (CCAC-BRZ)

52mm(2”)

ø19mm(3/4”)

1.8m(6’)

19mm(3/4”)

52mm(2”)

ø19mm(3/4”)

52mm(11/16”)

8mm(5/16”)

15mm(5/8”)

2.4m(8’)

19mm(3/4”)

52mm(11/16”)

21.2mm(13/16”)

15mm(5/8”)

Centro Trac Systems Centro Trac - Oil Rubbed Bronze Finish

415-504-3536

415-504-3536 TG22 6/17 • • teganlighting.com 4info@teganlighting.com •

Universal Achor for Centro Trac mounting to any surface; wall or ceiling.Oil Rubbed Bronze (BRZ) finish. Mount Universal Anchor every48” (1.2m), (min.). Refer to Installation Instructions for details.

Centro Universal Anchor (CUA-BRZ)

32mm(1 1/4”)

16mm(9/16”)

32mm(1-1/4”)

16mm(10/16”)

6mm(1/4”)6mm(1/4”)

Centro Trac - Mounting (cont’d)

Centro Trac - Coupler

Centro Coupler mechanically and electrically connects sections of Centro Trac for one circuit applica-tions. Order Centro Isolator (CI-BLK) to isolate any given length of track for more than one circuit operation (300W Max.). Separate electrical feeds are required. Oil Rubbed Bronze (BRZ) finish. Refer to Installa-tion Instructions for details.

8mm(5/16”)

17mm(11/16”)

8mm (5/16”)

17mm (11/16”)

25mm(1”)

Centro Coupler (CC-BRZ)

Centro Trac - Isolators

40mm(1 1/2”)

17mm(11/16”)

40mm(1.5”)

17mm (11/16”)

17mm(11/16”)

15mm(5/8”)

17mm (11/16”)

15mm(9/16”)

Centro End Cap (CEC-BLK)Centro Isolator (CI-BLK)

Centro Isolator electrically isolates sections of Centro Trac to allow separate circuits on one run. Separate electrical feeds are required (300W Max.). Black finish only. Refer to Installation Instructions for details.

Black decorative caps (2 per pack) cover the ends of Centro Trac andprovides a clean finish to the end of a Trac run. Required for properelectrical operation. Black finish only.

Centro Wall Mount Power Feed creates is minimalist wall mount option for Centro Trac. To be mounted to a “switch” box (provided by others) instead of a 4” J-Box to achieve a clean appearance on the wall. Available in Oil Rubbed Bronze (BRZ) finish.

Centro Wall Mount Power Feed (CWMPF-BRZ)

17mm(11/16”)

23mm (7/8”)

700mm(27”)

12mm (.5”)

ø115mm(4.5”)

76mm(3”)

114mm(4 -1/2”)

23mm(1”)17mm

(11/16”)

23mm (7/8”)

Switch Box By Others

Centro Trac Systems Centro Trac - Oil Rubbed Bronze Finish

415-504-3536

415-504-3536 TG22 6/17 • • teganlighting.com 5info@teganlighting.com •

Centro Trac - Power Feeds

11mm(7/16”)

19mm(3/4”)

Connects Power Feed Cable to Cen-tro Trac. Single circuit. Remote Power Supply. Order Centro Isolator (CI) to isolate any given length of track for more than one circuit operation (300W Max.). Additional electrical feeds are required. Oil Rubbed Bronze (BRZ) finish. Pack of two (2).Power cable ordered separately - contact factory. Refer to Installation Instructions for details.

19mm(3/4”)

11mm(7/16”)

Centro Power Bolt (CPB-BRZ)

2.43m(8’)

ø115mm(4 1/2”)

Covers standard 4” octagonal junction box. 8’ (2.4m) Power Feed Cable leads provided. Power Bolts included. Single circuit. Remote Power Supply. Order Centro Isola-tor (CI) to isolate any given length of track for more than one circuit operation (300W Max.). Additional electrical feeds are required. Oil Rubbed Bronze (BRZ) finish with clear (only) power cord. Refer to Installation Instructions for details.

700mm(27”)

12mm (.5”)

ø115mm(4.5”)

12mm(1/2”)

Centro Power Canopy (CPC-BRZ)

25mm(1”)

Covers standard 4” octagonal junction box. Centro Trac mounts directly to the power feeds on the canopy. Single circuit. Remote Power Supply.Use with Centro Ceiling Anchor (CCA) Mounting Hardware. Order Centro Isolator (CI) to isolate any given length of track for more than one circuit op-eration (300W Max.). Additional elec-trical feeds are required. Oil Rubbed Bronze (BRZ) finish. Refer to Installation Instructions for details.

ø115mm (4.5”)

25mm (1”)

27mm (1 1/16”)ø115mm

(4 1/2”)

27mm(11/16”)

Centro Single Feed Canopy (CSFC-BRZ)

Connector for Centro Bronze Trac System. 90º Mounting. Supplied with Spotlight as specified. Oil Rubbed Bronze (BRZ) finish. Refer to the Trac Design Guide for layout and specification assistance.

Centro 90° Connector (C90C)

ø19mm(3/4”)

25mm(1”)

25mm (1”)

ø19mm (3/4”)

Connector for Centro Trac system. Supplied with Spotlight as specified. Oil Rubbed Bronze (BRZ) finish.

25mm1”)

ø19mm(3/4”)ø19mm(3/4”)

25mm(1”)

Centro Trac - Connector

The Twist & Click system allows the Spotlights to be easily removed.The Spotlights click into the jack plug socket, the threaded jacket thenscrews into position to lock the connection in place. Once fixed,the luminaires are free to rotate or can be secured using two locking pins. Supplied separately.

CLICK

TWIST

Twist & Click SystemCentro Trac Connector (CTC-BRZ)

Centro Trac Systems Centro Trac - Oil Rubbed Bronze Finish

415-504-3536

415-504-3536 TG22 6/17 • • teganlighting.com 6info@teganlighting.com •

Centro Trac - Spotlights

The Claro MR-16 Spotlight combines design excellence with precision engineering. Oil-Rubbed Bronze finish (BRZ). Accomodates one (1) media. Claro features excellent beam control with the use of Media.

Claro-BRZ(Claro-BRZ)

The Tiro MR-16 Spotlight with Short Glare Shield. Oil-Rubbed Bronze finish (BRZ). Clean modular design with classic appeal. Accommodates one (1) Media (photo shows Media Holder 2-16).

Tiro-with Short Glare Shield (TIRO-SGS-BRZ)

146mm(5 -3/4”)

64mm(2 -1/2”)

ø57mm(2.25”)

114mm(4.5”)114mm(4 -1/2”)

ø57mm(2 -1/4”)

The Tiro MR-16 Spotlight with hand blown White Frit Glass Shield. Oil-Rubbed Bronze finish (BRZ). Clean modular design with classic appeal.

Tiro-with Frit Glass Shield (TIRO-FGS-BRZ)

157mm(6 -5/16”)

65mm(2 -1/2”)

Centro Trac Systems Centro Trac - Oil Rubbed Bronze Finish

415-504-3536

415-504-3536 TG22 6/17 • • teganlighting.com 7info@teganlighting.com •

Creates an uniform beam pattern that is useful for wall washing.

Will extend the lamp’s beam along one axis, allowing hightlighting of wider areas from a single fixture.

Smooths and widens irregular beam pattern.

ø50mm(2 -1/8”)

ø50mm(2 -1/8”)

Claro/Tiro Sandblasted Lens 16 (CSBL-16)

Claro/Tiro Linear Spread Lens 16 (CLSL-16)

Claro/Tiro Softening Lens 16(CSFL-16)

Tempered glass with a stipple effect that that pro-vides obscurity while retaining high transmission values. This low-iron optically clear glass offers maximum transmission and minimal absorption.

ø50mm(2 -1/8”)

Claro Solite Lens 16 (CSOL50-16)

Claro/Tiro Spotlights - Accessories

Field cuttable Connector Spot Extension will attach to any system to extend the Spot 72” (1.8m) from the System Connector. Specify with the appropriate system connector (not required with Monopoints). Oil Rubbed Bronze (BRZ) finish. Can be cut to shorter lengths at the factory.

72” Spot Extension (SpotExt72-BRZ)

1.8m(72”)

ø50mm(2 -1/8”)

Can accommodate up to two Media. 1/8” Hexcell black metal. Controls spill illumination and glare.

Creates a symmetrical broadening of the lamp beam.

ø50mm(2 -1/8”)

ø50mm(2 -1/8”)

Claro/Tiro Media Holder 2-16(CMH2-16-AL)

Claro/Tiro Honeycomb Louver 16 (CHCLB-16)

Claro/Tiro Prismatic Lens 16 (CPL-16)

ø57

11

ø57mm(2 -1/4”)

11mm(7/16”)