Centrimaster GT-5...impeller with backward curved blades, welded and painted with epoxy-powder paint...
Transcript of Centrimaster GT-5...impeller with backward curved blades, welded and painted with epoxy-powder paint...
Centrimaster GT-5Belt driven, double inlet centrifugal fans
Technical Data
Fläkt Woods 4897 GB 04.08 3 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
General Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
General Survey Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Design Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Starting of Fans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Materials and tolerances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Specifikationstext . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Fan Charts – Explanation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Acoustic Data – Explanation . . . . . . . . . . . . . . . . . . . . . . . . . .13
Dimensions, Weights, Fan Charts
and Acoustic Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14-70
Motor Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78
Product Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Contents
Fläkt Woods 4897 GB 04.08 4 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Belt drive double inlet CENTRIMASTER GT fans areavailable for air flow up to 50 m 3/s and for pressure riseup to 3 300 Pa. The fan series consists of centrifugal fanswith two impeller types:- with forward curved blades, GTLF, sizes 022 – 071- with backward curved blades, GTLB, sizes 022 – 100- with backward curved blades, GTHB, sizes 080 - 140.GTLB and GTHB have similar aerodynamic propertiesbut the type GTHB is a reinforced version for higherspeeds. GTHB in sizes 035 – 071 are available to specialorder.
Fans are available in normal version.
Belt driven, double inlet centrifugal fans
Fläkt Woods 4897 GB 04.08 5 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
GTLB/ GTHB
General Survey Charts
0,1 0,2 0,5 1 2 5 10 20 30 40 50 60
4000
2000
1000
500
200
100
400500 1000 2000 5000 10 000 20 000 50 000 100 000 140 000
022 025028 031
035
040045
050056
063
112
125
140
071080
090
100
Air flow, m3/h
Air flow, m3/s
Tota
l pre
ssur
e rise
, Pa
Size 022–140
500 1000 2000 5000 10 000 20 000 50 000 100 000
0,1 0,2 0,5 1 2 5 10 20 30
3000
2000
1000
500
100
200
022025
031028
035045
040
050
063056
071
Air flow, m3/h
Air flow, m3/s
Tota
l pre
ssur
e rise
, Pa
Size 022–071
GTLF
Fläkt Woods 4897 GB 04.08 6 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Fan casingFan casing is made of sendzimir-galvanized sheet.The casing is jointed by the “Pittsburg foldingmethod” in sizes 022 – 090. In sizes 100 – 140 the casingconsists of five sections with flanges.
Design Description
Pittsburg
Fan impellerThe impellers with backward-curved blades (GTLBand GTHB) are made of steel, welded and paintedwith 60 mm epoxy powder (color tone AM 8043, darkgrey). The impellers with forward curved blades(GTLF) are made of galvanized steel. GTLB and GTHBimpellers insizes 035 – 100 are dynamically balancedto an accuracy of G 2.5 according to ISO 1940 – 1973 atthe maximum speed. All GTLF and GTLB impellers insizes 022 – 031 are dynamically balanced to an accura-cy of G 6.3 according to ISO 1940 – 1973 at the maxi-mum speed. The impeller is secured to the shaft withkey (GTLB/GTHB) or with adapter sleeve (GTLF).
GTLB impeller
GTLF impeller
ShaftThe shafts are made of steel and both shaft ends areequipped with key-ways for pulleys. The shafts aredimensioned so as to make them withstand fatigue anda critical speed t hat is at least 20% higher than themax. speed of the fan. The shafts are protected againstcorrosion.
BearingsThe GTLB and GTLF fans in sizes 022 – 071 areequipped with permanently lubricated single-rowdeep-groove ball bearings sealed at both sides.These bearings are secured to the shaft by means ofan eccentric locking collar. The bearings aresupported by three or four-armed strong bearingsupports. GTLB fans in size 080 – 100 are equippedwith plummer blocks with grease nipple. Thesebearings are secured to the shaft by means of aneccentric locking collar. The plummer blocks aremounted on a welded, sturdy bearing bracket madeof flat steel. The calculated bearing life time of GTLBand GTLF fans is 20.000 hours.
GTHB fans in sizes 035 – 050, are equipped with plum-mer blocks with single-row deep-groove ball bearingsThese bearings are secured to the shaft by means of aconical adapter sleeve. GTHB fans in sizes 056 – 140, areequipped as standard with plummer blocks which haveself-aligning roller bearings. The plummer blocks aremounted on a welded, sturdy bearing bracket made offlat steel and are equipped with grease nipples.
Konstruktionsbeskrivning
Fläkt Woods 4897 GB 04.08 7 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Bearing of GTLF and GTLB in sizes 022 - 071
Bearing of GTLB in sizes 080 – 100
Bearing of GTHB in sizes 056 – 140
Bearing of GTHB in sizes 035 – 50
Fläkt Woods 4897 GB 04.08 8 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
To calculate the startingtime in direct on-line startingUse the following formula:
The calculated starting time is thetime needed for accelerating thefan from rest to full speed.
To calculate the startingtime in star-delta startingUse the following formula:
The calculated starting time is thetime during which the stardeltastarter must be in star for the fan toreach about 90 % of
full speed, whereupon the starterswitches over to delta.On star-delta starting, also checkthat the motor curve is higherthan the fan torque curve duringthe star connection period.The lowest possible motor ratingfor star-delta starting can be calcu-lated from thefollowing expres-sion.
Symbols usedP = motor rating, kW.
Pm1) = power demand withthe fan running atrated speed (includ-ing any belt-drivelosses), kW.
PY/D = lowest rating ofmotor for whichstar-delta staringcanbe employed, kW.
Mst 3) = ratio of motor start-ing torque to nor-mal torque.
Mmax3) = ratio of maximummotor torque tonormal torque.
nf = rated speed of fan,r/min.
J2) = Moment of inertiaof the systemreferred to the fanshaft, kg m2.
t = starting time, s.
1) Pm is given in the fan chart.
2) The moment of inertia of theimpeller is given in the fan-charts. The moment of iner-tia of the motor can generallybe disregarded.
3) See the catalogue of themotor supplier.
Starting of Fans
Starting time is too long
Equipment for heavy starting
Starting time is too long
Power demand of the fan
Transmission losses
Motor output required to operate fan
Select the motor
Select starting procedureDirect on-line or star-delta starting
Calculate the starting time
Check the permissible motor starting time
Select the starter
Check the tripping time of the overload protection
–––––M
–––––M
Fläkt Woods 4897 GB 04.08 9 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Selecting the MotorThe shaft power (P, kW) and the recommended min.permissible motor output for direct on-line starting(PM, kW) are specified in the fan charts, i.e. the safetyfactor is already included. Base your motor selection onthis PM figure. The safety factor covers belt losses thatarise with standardised belt pulleys.
Recommendations:When selecting GTLB and GTHB fans (with backward-curved blades) that at a given speed have an output peakwithin their operating range, use this output peak forselecting a motor and not the output at the duty point.
When selecting GTLF fans (with forward-curved blades)whose power demand, at a given speed, continuouslyincreases as the air flow increases, use the shaft powerdemand P at the duty point (adding the safety factor!) orthe recommended min. permissible motor output PM. Ifyou cannot with certainty plot the duty point in the fanchart, select a motor for an output that is another 15–20 %higher.
Motor
MotorThe GT fans are normally supplied with the motor mounted.This enables the fan to be trial run prior to dispatch andFläkt Woods can assume undivided warranty liability. Ifthe fan is supplied without motor, the size and speed of themotor must be specified when the order is placed so thatthe correct belt drive can be selected. Detailed motor datais tabulated in separate tables. See under Motor Data.
Belt DriveThe belt drive consists of belt pulleys and belt(s). Thepulleys have a separate Taper-Lock-type hub, which iseasy to fit and remove.The belt guard and slide rails are included in the GT fandelivery.
Base frameBase frame of GTLB and GTLF is made of galvanizedsheet steel with exception of size GTLB-5-100. GTHBand GTLB-5-100 has welded base frame which is hot-dip galvanized.
Fläkt Woods 4897 GB 04.08 10 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
The particulars in the charts are given with the tolerancespecified in the DIN 24 166 Standard, Class 2.
ISO 9001 and ISO 14001 QualityFläkt Woods has received quality management certifi-cation in accordance with ISO 9001. We document ourquality management responsibility at every stage of ourbusiness activities from the product development toproduction, procurement and marketing.We have received environmental management certifi-cation in accordance with ISO 14001. We aim tominimise the impact of our business activities and ourproducts on the environment.
GT-fans in standard version meet the provisions of envi-ronmental class C2.Fan casing: Sendzimir galvanized sheet steel,
(275 g/m2 thick zinc )Inlet cone: Sendzimir galvanized sheet steel in the
normal version. Shaft: Centreless-ground steel with anti-
corrosion protection.Fan impeller: GTLB and GTHB: Sheet steel, welded,
coated with 60 µm epoxy powder,color: AM8043, dark grey. GTLF: Sendzimir galvanized steel.
Materials and tolerances
Tolerance Class
DIN 24166 1 2 3
Air flow qv: ±2,5% ±5,0% ±10,0%
Pressure rise, ∆pt: ±2,5% ±5,0% ±10,0%
Shaft power demand*, P: +3,0% +5,0% +16,0%
Efficiency**, η: –2,0% –5,0% –
A-weighted sound power level*, LWA:+3 dB +4 dB +6 dB
* Negative tolerance permissible
** Positive tolerance permissible
GTLBDouble inlet centrifugal fan forbelt drive in sizes 022 - 100. Fancasing made of Sendzimir galva-nized sheet steel and jointed byPittsburg folding method, in size100 consisting of five sectionsequipped with flanges. Steelimpeller with backward curvedblades, welded and painted withepoxy-powder paint 60 mm.Impeller is dynamically balancedto an accuracy of G 2.5 (sizes 035 –100) or G 6.3 (sizes 022 – 031)according to ISO 1940 - 1973. Steelshaft with keyways at both endsand designed for a critical speedwhich is 20% higher than themaximum speed of the fan.Impeller secured to the shaft bymeans of a key. Permanently lubri-cated single-row deep-groove ballbearings sealed at both sides,secured to the shaft by meansof an eccentric locking collar. Thebearings are supported by three orfour-arm spider. GTLB-fans insizes 080 – 100 have plummerblocks with grease nipplessupported by a welded bracket.Fan performance is measuredaccording to AMCA210-85 andsound data according to AMCA300-85.
Fan data is presentedaccording to DIN 24166,class 2.
GTHBDouble inlet centrifugal fan forbelt drive in sizes 035 – 140. Fancasing is made of Sendzimirgalvanized sheet steel and jointedby Pittsburg folding method, insizes 100 – 140 consisting of fivesections equipped with flanges.Steel impeller with backwardcurved blades, welded and paint-ed with epoxy-powder paint 60mm. Impeller is dynamicallybalanced to an accuracy of G 2.5according to ISO 1940 – 1973. Steelshaft with keyways at both endsand designed for a critical speedwhich is 20% higher than themaximum speed of the fan.Impeller secured to the shaft bymeans of a key. GTHB-fans in sizes035 to 050 have plummer blockswith single-row deep-groove ballbearings, secured to the shaft bymeans of a taper mounting sleeve.GTHB-fans in sizes 056 to 140have plummer blocks with self-aligning roller bearings. Theplummer blocks bearings haveequipped with grease nipples andare supported by a welded brack-et. Fan performance is measuredaccording to AMCA210-85 andsound data according to AMCA300-85.
Fan data is presentedaccording to DIN 24166,class 2.
GTLFDouble inlet centrifugal fan forbelt drive in sizes 022 – 071. Fancasing made of Sendzimir galva-nized sheet steel and jointed byPittsburg folding method.Impeller with forward curvedblades, made of Sendzimirgalvanised sheet steel. Impeller isdynamically balanced to an accu-racy of G 6.3 according to ISO 1940- 1973. Steel shaft with keyways atboth ends and designed for a criti-cal speed which is 20% higherthan the maximum speed of thefan. . Impeller secured to the shaftby means of an adapter sleeve.Permanently lubricated single-row deep-groove ball bearingssealed at both sides, secured to theshaft by means of an eccentriclocking collar. The bearings aresupported by three or four-armspider. Fan performance is meas-ured according to AMCA210-85and sound data according toAMCA300-85.
Fan data is presentedaccording to DIN 24166,class 2.
Specification text – CENTRIMASTER
Fläkt Woods 4897 GB 04.08 11 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Fläkt Woods 4897 GB 04.08 12 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Fan Charts – Explanation
The GT fan charts on the followingpages are applicable to air with adensity of 1.2 kg/m3.
1 = Air flow, m3/s (x-axis).
= Air flow, m3/h (x-axis).
= Total pressure rise, Pa (y-axis).
= Fan speed, r/min.
= Fan efficiency, η, %.
= Total sound power level LwA(dB), broken line.
= Power demand, P (kW).
= Min. recommended motor rating fordirect online starting, PM (kW).
= Moment of inertia J (kg m2).
= Dynamic pressure at the outlet, pd.
= Adjusted dynamic pressure of a free-dischargelet fan, p2 + pd.
= Correction factor for the efficiency , kη.
= Recommended operating range.
= Recommended operating range of aheavy-duty.
2
3
4
5
6
7
8
9
10
11
12
1
2
3
4
5
6
78
9
10
11
12
Connection losses
Protective screen at the inlet: 0,25 xpdProtective screen at the outlet: GTLF: 0,3 x pd
GTLB, GTHB: 0,25 x pd
GTHB
GTLB
Fläkt Woods 4897 GB 04.08 13 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Acoustic Data – Explanation
Acoustic dataThe sound power levels to the surroundings and to the outlet duct have been measured for each fan size. The fandiagram gives the A-weighted sound power level LWAfor the outlet side. The following formula is used to deter-mine the sound power level to the surroundings of a free-inlet fan, s = 2, or to the outlet of a free-discharge fan, s = 4:
LWAcan be read from the fan chart and the ∆LWA(s) can be obtained from theadjacent table .
The following formula is used to determine the total sound power level to different sound paths:
∆LWt(s) can be obtained from the adjacent table.
The following formula is used to determine the linear sound power level (not A-weighted) to different sound paths(to the discharge duct s = 1, to the surroundings of a free-inlet fan s = 2, to the outlet of a free-dischargelet fan s = 4):
Kokt(s) can be obtained from the adjacent table.
In general, the maximum sound power level occurs on the octave band that corresponds to the blade frequency.Acoustic data is given including the blade frequency.
LWA(s) = LWA + ∆LWA(s)
DescriptionLWA A-weighted sound power level to the outlet duct dB(A)s Sound path -Kokt(s) Correction figure for breaking down sound level at each octave band dBLWokt(s) Total sound power level at each octave band (without A-weighting) dBLWt(s) Total sound power level (without A- weighting), corresponding to sound paths dBLWA(s) A-weighted sound power level equivalent to sound paths dB(A)∆LWt(s), ∆LWA(s) Correction factors dB, dB(A)
1
2
2
4
LWt(s) = LWA(s) + ∆LWt(s)
LWokt(s) = LWA + Kokt(s)
Description of sound path Test arrangement
1 = To the outlet duct2 = To the surroundings of
a free-inlet fan inlet duct
4 = To fan outlet of a free-dischargelet fan
Fläkt Woods 4897 GB 04.08 14 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Dimensions and Weights – GTLF-5-022
Right-hand version with 90°direction of discharge shown
532464348288
325
3575
775
20
36ø 30
71322
753
30
51
03
38
23
81
94
595
799
30
45
62
76
36
ø 30
20
713
753
625525
481
36
29
1
49
3
792625
20
ø 30381
525669
713753
47
53
82
30
82
08
64
36
30
768
713 ø 30
20
753
588
22
Right-hand version (viewed from drive side)
Left-hand version (same dimensions as the right-hand version)
Weight (kg)GTLF-5-022: 22,0(including belt drive, without motor).
Motor data: see separate motor list.
For dimensions of discharge flange, see page 78 Flexible connection.
0° 180°
90° 270°
90°0° 270°180°
Fläkt Woods 4897 GB 04.08 15 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
0 - 800 4 -2 -3 -5 -4 -8 -10 -15 0 6,7
801 - 1800 3 -3 -3 -4 -5 -7 -10 -15 0 6,1
1801 - 3400 2 -3 -4 -5 -6 -6 -9 -14 0 5,4
0 - 800 -1 0 -1 -2 -2 -6 -9 -15 2 4,3
801 - 1800 -3 -2 -1 -1 -2 -6 -8 -15 2,3 3,5
1801 - 3400 -5 -3 -2 -3 -2 -4 -8 -12 2,4 2,7
0 - 800 -12 -9 -6 -6 -4 -8 -10 -15 -0,4 1,8
801 - 1800 -14 -10 -6 -5 -5 -7 -10 -15 -0,4 1,7
1801 - 3400 -17 -11 -7 -6 -6 -6 -9 -14 -0,4 1,3
Correction Kok, dB
Speed range Octave band, mid-frequency, Hz
Sound path r/min 63 125 250 500 1000 2000 4000 8000 ∆LWA(s) ∆LWt(s)
Fan Charts – Acoustic Data – GTLF-5-022
Belt-driven, double-inlet,forward curved blades
Impeller diameter: 220 mm
To the outlet duct
To the surroundingof a free-inlet fan
To the outlet of afree-discharge fan
Fläkt Woods 4897 GB 04.08 16 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Dimensions and Weights – GTLB-5-022
Right-hand version with 90°direction of discharge shown
532464348288
325
3575
775
20
36ø 30
71322
753
30
51
03
38
23
81
94
595
799
30
45
62
76
36
ø 30
20
713
753
625525
481
36
29
1
49
3
792625
20
ø 30381
525669
713753
47
53
82
30
82
08
64
36
30
768
713 ø 30
20
753
588
22
Right-hand version (viewed from drive side)
Left-hand version (same dimensions as the right-hand version)
Weight (kg)GTLB-5-022: 23,0(including belt drive, without motor).
Motor data: see separate motor list.
For dimensions of discharge flange, see page 78 Flexible connection.
0° 180°
90° 270°
90°0° 270°180°
Fläkt Woods 4897 GB 04.08 17 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Fan Charts – Acoustic Data – GTLB-5-022
Belt-driven, double-inlet,backward curved blades
Impeller diameter: 220 mm
0 - 1928 6 4 5 -5 -7 -9 -12 -17 0 10,2
1929 - 3857 4 -1 -4 0 -8 -8 -12 -18 0 7,1
3858 - 4500 -1 -3 -2 -9 -2 -8 -12 -18 0 4,7
0 - 1928 0 4 7 1 -3 -7 -13 -19 3,3 6,9
1929 - 3857 -5 -2 -2 4 -2 -7 -12 -20 3,7 3,3
3858 - 4500 -9 -10 -6 -4 2 -5 -11 -21 3,7 0,9
0 - 1928 -7 -3 2 -6 -7 -9 -12 -17 -1 5,7
1929 - 3857 -12 -8 -7 -1 -8 -8 -12 -18 -0,6 2,7
3858 - 4500 -18 -10 -5 -10 -2 -8 -12 -18 0,1 1,4
Correction Kok, dB
Speed range Octave band, mid-frequency, Hz
Sound path r/min 63 125 250 500 1000 2000 4000 8000 ∆LWA(s) ∆LWt(s)
To the outlet duct
To the surroundingof a free-inlet fan
To the outlet of afree-discharge fan
Fläkt Woods 4897 GB 04.08 18 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Dimensions and Weights – GTLF-5-025
Right-hand version with 90°direction of discharge shown
566499382322
359392
3575
872
20
36ø 30
82012
860
30
55
23
61
25
12
00
677
958
30
47
92
84
36
ø 30
20
820
860
767657
606
36
30
6
53
0
909724
20
ø 30453
614775
820860
51
54
11
33
02
20
59
36
30
875
820 ø 30
20
860
680
15
Right-hand version (viewed from drive side)
Left-hand version (same dimensions as the right-hand version)
Weight (kg)GTLF-5-025: 26,0(including belt drive, without motor).
Motor data: see separate motor list.
For dimensions of discharge flange, see page 78 Flexible connection.
0° 180°
90° 270°
90°0° 270°180°
Fläkt Woods 4897 GB 04.08 19 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
0.2 1 2 2.4100
200
500
1000
2000
2200
0.05 0.1
1
2 2.5
3 3.5
4
5 6
0.2
1
22.533.544.5567
1000 2000 3000 4000 5000 6000 7000 8000
40
50
60
63.5η,%60
80010001200140016001800200022002400260028003000
qvm3/h
m3/s
J = 0.03 kgm2
∆pt
,Pa
P,k
W
PM
,kW
800
1000
1200
1400
1600
1800
2000
2200
2400
2600
2800
3000r/min
r/min
,dB 75 80
85
90
LwA
4 6 8 10 12 14 16 18 20 22 24v m/s
20 40 60 80 100 140 200 300 350pd Pa
100 200 300 400 600 700∆pb+ pd Pa
Fan Charts – Acoustic Data – GTLF-5-025
Belt-driven, double-inlet,forward curved blades
Impeller diameter: 250 mm
0 - 800 4 -2 -3 -5 -4 -8 -10 -15 0 6,7
801 - 1800 3 -3 -3 -4 -5 -7 -10 -15 0 6,1
1801 - 3000 2 -3 -4 -5 -6 -6 -9 -14 0 5,4
0 - 800 -1 0 -1 -2 -2 -6 -9 -15 2 4,3
801 - 1800 -3 -2 -1 -1 -2 -6 -8 -15 2,3 3,5
1801 - 3000 -5 -3 -2 -3 -2 -4 -8 -12 2,4 2,7
0 - 800 -10 -8 -6 -6 -4 -8 -10 -15 -0,4 2
801 - 1800 -12 -9 -6 -5 -5 -7 -10 -15 -0,4 1,9
1801 - 3000 -15 -9 -7 -6 -6 -6 -9 -14 -0,4 1,5
Correction Kok, dB
Speed range Octave band, mid-frequency, Hz
Sound path r/min 63 125 250 500 1000 2000 4000 8000 ∆LWA(s) ∆LWt(s)
To the outlet duct
To the surroundingof a free-inlet fan
To the outlet of afree-discharge fan
Fläkt Woods 4897 GB 04.08 20 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Dimensions and Weights – GTLB-5-025
Right-hand version with 90°direction of discharge shown
566499382322
359392
3575
872
20
36ø 30
82012
860
30
55
23
61
25
12
00
677
958
30
47
92
84
36
ø 30
20
820
860
767657
606
36
30
6
53
0
909724
20
ø 30453
614775
820860
51
54
11
33
02
20
59
36
30
875
820 ø 30
20
860
680
15
Right-hand version (viewed from drive side)
Left-hand version (same dimensions as the right-hand version)
Weight (kg)GTLB-5-025: 27,0(including belt drive, without motor).
Motor data: see separate motor list.
For dimensions of discharge flange, see page 78 Flexible connection.
0° 180°
90° 270°
90°0° 270°180°
Fläkt Woods 4897 GB 04.08 21 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
0.2 0.6 1 1.4 1.8 2
100
200
500
1000
20002200
0.05
0.1
0.2
1
2
2.5
0.1
0.2
1
2
2.5
3
2000 4000 6000
4 6 8 10 12 14 16 18 20v m/s
10 30 50 100 200 240pd Pa
40 100 200∆pb+ pd Pa
40
50
60
70
757675
η,%
1500
2000
2500
3000
3500
4000
4500
qvm3 /h
m3 /s
J = 0.05 kgm2
∆pt
,Pa
P,k
W
PM
,kW
1500
2000
2500
3000
3500
4000
4500
r/min
r/min
,dB 75 80 85 90 95
1500 .879
2000 .935
2500 .963
3000 .979
3500 .989
4000 .995
4500 1
r/min kη
LwA
3
Fan Charts – Acoustic Data – GTLB-5-025
Belt-driven, double-inlet,backward curved blades
Impeller diameter: 250 mm
0 - 1928 2 2 4 -4 -7 -8 -11 -18 0 8,2
1929 - 3857 0 0 -5 -1 -7 -7 -11 -18 0 5,6
3858 - 4500 -3 -3 -2 -8 -3 -8 -10 -15 0 4,1
0 - 1928 -5 0 5 1 -2 -6 -13 -21 3,2 5
1929 - 3857 -9 -6 -4 3 -2 -7 -12 -22 3,1 2,5
3858 - 4500 -12 -10 -9 -4 2 -6 -10 -21 3,5 0,7
0 - 1928 -11 -4 1 -5 -7 -8 -11 -18 -0,8 4,8
1929 - 3857 -15 -6 -8 -2 -7 -7 -11 -18 -0,4 2,3
3858 - 4500 -18 -9 -5 -9 -3 -8 -10 -15 -0,2 1,6
Correction Kok, dB
Speed range Octave band, mid-frequency, Hz
Sound path r/min 63 125 250 500 1000 2000 4000 8000 ∆LWA(s) ∆LWt(s)
To the outlet duct
To the surroundingof a free-inlet fan
To the outlet of afree-discharge fan
Fläkt Woods 4897 GB 04.08 22 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Dimensions and Weights – GTLF-5-028
Right-hand version with 90°direction of discharge shown
605549421361
398431
3575
872
20
36ø 30
82012
860
30
59
53
85
26
22
04
657
944
30
51
32
98
36
ø 30
20
820
860
734611
553
36
32
6
57
7
925717
20
ø 30414
595775
820860
57
74
57
36
92
47
66
36
30
872
820 ø 30
20
860
657
12
Right-hand version (viewed from drive side)
Left-hand version (same dimensions as the right-hand version)
Weight (kg)GTLF-5-028: 29,0(including belt drive, without motor).
Motor data: see separate motor list.
For dimensions of discharge flange, see page 78 Flexible connection.
0° 180°
90° 270°
90°0° 270°180°
Fläkt Woods 4897 GB 04.08 23 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
0.4 1 2 3100
200
500
1000
2000
2600
0.3
0.5
1
2
3
4
5
6
7
0.5
1
2
3
4
5
6789
2000 3000 4000 5000 6000 7000 8000 9000 10000
40
50
60
65
60
80010001200
1400
1600
1800
2000
2200
2400
26002700
qvm3/h
m3/s
J = 0.06 kgm2
∆pt
,Pa
P,k
W
800
1000
1200
1400
1600
1800
2000
2200
2400
26002700r/min
r/min
,dB 80
85
90
η,%
LwA
4 6 8 10 12 14 16 18 20 22v m/s
20 30 50 100 160 200 250 300pd Pa
100 200 300 400 500 600∆pb+ pd Pa
Fan Charts – Acoustic Data – GTLF-5-028
Belt-driven, double-inlet,forward curved blades
Impeller diameter: 280 mm
0 - 800 4 -2 -3 -5 -4 -8 -10 -15 0 6,7
801 - 1800 3 -3 -3 -4 -5 -7 -10 -15 0 6,1
1801 - 2700 2 -3 -4 -5 -6 -6 -9 -14 0 5,4
0 - 800 -1 0 -1 -2 -2 -6 -9 -15 2 4,3
801 - 1800 -3 -2 -1 -1 -2 -6 -8 -15 2,3 3,5
1801 - 2700 -5 -3 -2 -3 -2 -4 -8 -12 2,4 2,7
0 - 800 -9 -7 -5 -5 -4 -8 -10 -15 -0,2 2,4
801 - 1800 -11 -8 -5 -4 -5 -7 -10 -15 -0,2 2,2
1801 - 2700 -13 -8 -6 -5 -6 -6 -9 -14 -0,2 1,8
Correction Kok, dB
Speed range Octave band, mid-frequency, Hz
Sound path r/min 63 125 250 500 1000 2000 4000 8000 ∆LWA(s) ∆LWt(s)
To the outlet duct
To the surroundingof a free-inlet fan
To the outlet of afree-discharge fan
Fläkt Woods 4897 GB 04.08 24 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Dimensions and Weights – GTLB-5-028
Right-hand version with 90°direction of discharge shown
605549421361
398431
3575
872
20
36ø 30
82012
860
30
59
53
85
26
22
04
657
944
30
51
32
98
36
ø 30
20
820
860
734611
553
36
32
6
57
7
925717
20
ø 30414
595775
820860
57
74
57
36
92
47
66
36
30
872
820 ø 30
20
860
657
12
Right-hand version (viewed from drive side)
Left-hand version (same dimensions as the right-hand version)
Weight (kg)GTLB-5-028: 30,0(including belt drive, without motor).
Motor data: see separate motor list.
For dimensions of discharge flange, see page 78 Flexible connection.
0° 180°
90° 270°
90°0° 270°180°
Fläkt Woods 4897 GB 04.08 25 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
0.4 0.6 1 1.4 1.8 2.2 2.6
100
200
500
1000
2000
2400
0.2
1
2
3
4
1
2
3
4
2000 4000 6000 8000
4 6 8 10 12 14 16 18 20v m/s
30 50 100 200 240pd Pa
40 100 200 300∆pb+ pd Pa
50
60
70
75
7675
η,%
1800
2200
2600
3000
3400
3800
4200
qvm3 /h
m3 /s
J = 0.08 kgm2
∆pt
,Pa
P,k
W
PM
,kW
1800
2200
2600
3000
3400
3800
4200
r/min
r/min
,dB 80 85 90 95
1600 .911
1800 .932
2000 .947
2200 .958
2400 .967
2600 .974
2800 .98
3000 .984
3200 .988
3400 .991
3600 .994
3800 .996
4000 .998
4200 1
r/min kη
LwA
40
Fan Charts – Acoustic Data – GTLB-5-028
Belt-driven, double-inlet,backward curved blades
Impeller diameter: 280 mm
0 - 1928 1 3 4 -5 -6 -8 -12 -17 0 8,2
1929 - 3857 -3 0 -5 -2 -6 -7 -12 -17 0 4,7
3858 - 4200 -5 -3 -2 -7 -4 -6 -10 -14 0 3,9
0 - 1928 -6 2 4 1 -2 -6 -14 -21 3 5,2
1929 - 3857 -11 -6 -4 1 -2 -7 -13 -21 2,1 2,5
3858 - 4200 -14 -10 -9 -4 1 -4 -10 -19 3,3 0,6
0 - 1928 -10 -2 2 -6 -6 -8 -12 -17 -0,5 5,4
1929 - 3857 -17 -5 -7 -3 -6 -7 -12 -17 -0,5 2,5
3858 - 4200 -19 -8 -4 -8 -4 -6 -10 -14 0 1,8
Correction Kok, dB
Speed range Octave band, mid-frequency, Hz
Sound path r/min 63 125 250 500 1000 2000 4000 8000 ∆LWA(s) ∆LWt(s)
To the outlet duct
To the surroundingof a free-inlet fan
To the outlet of afree-discharge fan
Fläkt Woods 4897 GB 04.08 26 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Dimensions and Weights – GTLF-5-031
Right-hand version with 90°direction of discharge shown
678594464404
441474
35100
1014
20
36ø 30 (ø 50 IEC160)
94529
985
30
67
24
40
30
12
38
778
1107
30
59
53
59
36
ø 30 (ø 50 IEC160)
20
945
985
875736
673
36
37
2
65
4
1070837
20
ø 30(ø 50IEC160)
496698
900945
985
66
45
24
43
12
92
90
36
30
992
945 ø 30 (ø 50 IEC160)
20
985
756
7
1015
Right-hand version (viewed from drive side)
Left-hand version (same dimensions as the right-hand version)
Weight (kg)GTLF-5-031: 38,0(including belt drive, without motor).
Motor data: see separate motor list.
For dimensions of discharge flange, see page 78 Flexible connection.
0° 180°
90° 270°
90°0° 270°180°
Fläkt Woods 4897 GB 04.08 27 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
0.5 1 2 3 4100
200
500
1000
2000
2400
0.4
1
2
3
4
5
10
0.6
1
2
3
4
5
10
12
4000 6000 8000 10000 12000 14000
40
50
60
65
666560
80010001200
1400
1600
1800
2000
2200
2400
qvm3/h
m3/s
J = 0.10 kgm2
∆pt
,Pa
P,k
W
PM
,kW
800
1000
1200
1400
1600
1800
2000
2200
2400r/min
r/min
,dB 80 85
90
95
LwA
η,%
4 6 8 10 12 14 16 18 20 22 24v m/s
20 30 40 100 250 300pd Pa
100 140 200 300 400 500 600∆pb+ pd Pa
Fan Charts – Acoustic Data – GTLF-5-031
Belt-driven, double-inlet,forward curved blades
Impeller diameter: 310 mm
0 - 800 4 -2 -3 -5 -4 -8 -10 -15 0 6,7
801 - 1800 3 -3 -3 -4 -5 -7 -10 -15 0 6,1
1801 - 2400 2 -3 -4 -5 -6 -6 -9 -14 0 5,4
0 - 800 -1 0 -1 -2 -2 -6 -9 -15 2 4,3
801 - 1800 -3 -2 -1 -1 -2 -6 -8 -15 2,3 3,5
1801 - 2400 -5 -3 -2 -3 -2 -4 -8 -12 2,4 2,7
0 - 800 -6 -7 -5 -5 -4 -8 -10 -15 -0,2 2,7
801 - 1800 -9 -8 -5 -4 -5 -7 -10 -15 -0,2 2,4
1801 - 2400 -12 -8 -6 -5 -6 -6 -9 -14 -0,2 1,8
Correction Kok, dB
Speed range Octave band, mid-frequency, Hz
Sound path r/min 63 125 250 500 1000 2000 4000 8000 ∆LWA(s) ∆LWt(s)
To the outlet duct
To the surroundingof a free-inlet fan
To the outlet of afree-discharge fan
Fläkt Woods 4897 GB 04.08 28 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Dimensions and Weights – GTLB-5-031
Right-hand version with 90°direction of discharge shown
678594464404
441474
35100
1014
20
36ø 30 (ø 50 IEC160)
94529
985
30
67
24
40
30
12
38
778
1107
30
59
53
59
36
ø 30 (ø 50 IEC160)
20
945
985
875736
673
36
37
2
65
4
1070837
20
ø 30(ø 50IEC160)
496698
900945
985
66
45
24
43
12
92
90
36
30
992
945 ø 30 (ø 50 IEC160)
20
985
756
7
1015
Right-hand version (viewed from drive side)
Left-hand version (same dimensions as the right-hand version)
Weight (kg)GTLB-5-031: 40,0(including belt drive, without motor).
Motor data: see separate motor list.
For dimensions of discharge flange, see page 78 Flexible connection.
0° 180°
90° 270°
90°0° 270°180°
Fläkt Woods 4897 GB 04.08 29 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
0.5 1.5 2.5 3.550
100
200
500
1000
2000
2400
0.2
1
2
3
4
5
1
2
3
4
5
2000 4000 6000 8000 10000 12000
4 6 8 10 12 14 16 18 20v m/s
10 30 50 100 200 240 280pd Pa
40 100 200 300∆pb+ pd Pa
40
50
60
70
75
7775
η,%
160018002000
2200
2400
2600
2800
3000
3200
3400
3600
qvm3 /h
m3 /s
J = 0.14 kgm2
∆pt
,Pa
P,k
W
PM
,kW
1600
1800
2000
2200
2400
2600
2800
3000
3200
3400
3600
r/min
r/min
,dB 80 85 90 95
1600 .954
1800 .966
2000 .974
2200 .981
2400 .985
2600 .989
2800 .992
3000 .995
3200 .997
3400 .999
3600 1
r/min kη
LwA
Fan Charts – Acoustic Data – GTLB-5-031
Belt-driven, double-inlet,backward curved blades
Impeller diameter: 310 mm
0 - 1928 -6 0 5 -5 -6 -8 -15 -20 0 7,1
1929 - 3600 -8 -3 -7 -2 -6 -6 -12 -20 0 3,2
0 - 1928 -7 -2 4 0 -2 -6 -16 -21 2,6 4,6
1929 - 3600 -13 -9 -6 -1 -3 -6 -13 -23 1,2 1,9
0 - 1928 -16 -5 3 -5 -6 -8 -15 -20 -0,4 5,3
1929 - 3600 -20 -8 -9 -2 -6 -6 -12 -20 0 1,8
Correction Kok, dB
Speed range Octave band, mid-frequency, Hz
Sound path r/min 63 125 250 500 1000 2000 4000 8000 ∆LWA(s) ∆LWt(s)
To the outlet duct
To the surroundingof a free-inlet fan
To the outlet of afree-discharge fan
Fläkt Woods 4897 GB 04.08 30 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Dimensions and Weights – GTLF-5-035
Right-hand version with 90°direction of discharge shown
747654513453
490523
35100
997
20
6ø 30 (ø 50 IEC160)
94512
985
30
1010
73
24
76
31
72
49
736
10901112
30
61
93
58
36
ø 30 (ø 50 IEC160)
20
945985
833675
607
36
39
7
71
5
1095832
20
ø 30 (ø 50 IEC160)
447832
900945
985
71
35
48
45
02
92
65
36
30
997
945 ø 30 (ø 50 IEC160)
20
985
736
12
Right-hand version (viewed from drive side)
Left-hand version (same dimensions as the right-hand version)
Weight (kg)GTLF-5-035: 44,0(including belt drive, without motor).
Motor data: see separate motor list.
For dimensions of discharge flange, see page 78 Flexible connection.
0° 180°
90° 270°
90°0° 270°180°
Fläkt Woods 4897 GB 04.08 31 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
0.5 1 2 3 4 5100
200
500
1000
2000
0.4
1
2
3
4
5
10
0.6
1
2
3
45
10
12
4000 6000 8000 10000 12000 14000 16000 18000
40
50
60
65
676560
600800
1000
1200
1400
1600
18001900
qvm3/h
m3/s
J = 0.15 kgm2
∆pt
,Pa
P,k
W
PM
,kW
600
800
1000
1200
1400
1600
1800
1900r/min
r/min
,dB 75 80 85
90
95
LwA
η,%
4 6 8 10 12 14 16 18 20 22 24v m/s
20 30 40 100 200 300pd Pa
100 140 200 300 400 500 600 700∆pb+ pd Pa
Fan Charts – Acoustic Data – GTLF-5-035
Belt-driven, double-inlet,forward curved blades
Impeller diameter: 350 mm
0 - 800 4 -2 -3 -5 -4 -8 -10 -15 0 6,7
801 - 1800 3 -3 -3 -4 -5 -7 -10 -15 0 6,1
1801 - 1900 2 -3 -4 -5 -6 -6 -9 -14 0 5,4
0 - 800 -1 0 -1 -2 -2 -6 -9 -15 2 4,3
801 - 1800 -3 -2 -1 -1 -2 -6 -8 -15 2,3 3,5
1801 - 1900 -5 -3 -2 -3 -2 -4 -8 -12 2,4 2,7
0 - 800 -5 -6 -4 -5 -4 -8 -10 -15 -0,2 3,1
801 - 1800 -8 -7 -4 -4 -5 -7 -10 -15 -0,1 2,7
1801 - 1900 -9 -7 -5 -5 -6 -6 -9 -14 -0,2 2,3
Correction Kok, dB
Speed range Octave band, mid-frequency, Hz
Sound path r/min 63 125 250 500 1000 2000 4000 8000 ∆LWA(s) ∆LWt(s)
To the outlet duct
To the surroundingof a free-inlet fan
To the outlet of afree-discharge fan
Fläkt Woods 4897 GB 04.08 32 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Dimensions and Weights – GTLB-5-035
Right-hand version with 90°direction of discharge shown
747654513453
490523
35100
997
20
6ø 30 (ø 50 IEC160)
94512
985
30
1010
73
24
76
31
72
49
736
10901112
30
61
93
58
36
ø 30 (ø 50 IEC160)
20
945985
833675
607
36
39
7
71
5
1095832
20
ø 30 (ø 50 IEC160)
447832
900945
985
71
35
48
45
02
92
65
36
30
997
945 ø 30 (ø 50 IEC160)
20
985
736
12
Right-hand version (viewed from drive side)
Left-hand version (same dimensions as the right-hand version)
Weight (kg)GTLB-5-035: 47,0(including belt drive, without motor).
Motor data: see separate motor list.
For dimensions of discharge flange, see page 78 Flexible connection.
0° 180°
90° 270°
90°0° 270°180°
Dimension on GTHB-5-035 available tospecial order.
Fläkt Woods 4897 GB 04.08 33 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
0.5 1 2 3 4 5 5.5
100
200
500
1000
2000
3000
4000
0.5
1
2
4
8
12
1
2
6
12
14
2000 4000 6000 8000 10000 12000 14000 16000 18000
4 6 8 10 12 14 16 18 20 22 24 26v m/s
10 20 40 100 200 300 350pd Pa
40 100 200 300 400 500∆pb+ pd Pa
40
50
60
70
75
7975
η,%
16001800
20002200
24002600
28003000320033003400
36003800
4000
qvm3 /h
m3 /s
J = 0.24 kgm2
∆pt
,Pa
P,k
W
PM
,kW
1600
18002000
22002400
26002800
30003200
GXLB max 330034003600
3800GXHB max 4000
r/min
r/min
88 92 96 100
1400 .948
1600 .962
1800 .971
2000 .978
2200 .983
2400 .987
2600 .99
2800 .992
3000 .994
3200 .996
3400 .997
3600 .998
3800 .999
4000 1
r/min kη
,dB 84LwA
Fan Charts – Acoustic Data – GTLB-5-035
Belt-driven, double-inlet,backward curved blades
Impeller diameter: 350 mm
= GTHB-5-035available tospecial order.
GTHB
GTLB
0 - 1928 -4 0 5 -5 -6 -8 -15 -21 0 7,3
1929 - 3857 -9 -3 -6 -3 -6 -5 -12 -19 0 3,1
3858 - 4000 -11 -6 -3 -8 -4 -5 -11 -15 0 2,6
0 - 1928 -5 1 3 0 -3 -7 -10 -21 2,2 5,1
1929 - 3857 -12 -6 -5 -1 -5 -7 -12 -21 0,4 2,6
3858 - 4000 -14 -10 -8 -6 -1 -5 -8 -16 1,9 0,8
0 - 1928 -13 -4 3 -5 -6 -8 -15 -21 -0,4 5,5
1929 - 3857 -20 -7 -8 -3 -6 -5 -12 -19 0,1 1,7
3858 - 4000 -23 -10 -4 -8 -4 -5 -11 -15 0,2 1,5
Correction Kok, dB
Speed range Octave band, mid-frequency, Hz
Sound path r/min 63 125 250 500 1000 2000 4000 8000 ∆LWA(s) ∆LWt(s)
To the outlet duct
To the surroundingof a free-inlet fan
To the outlet of afree-discharge fan
Fläkt Woods 4897 GB 04.08 34 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Dimensions and Weights – GTLF-5-040
Right-hand version with 90°direction of discharge shown
811709567507
551587
40100
11291133
20
36ø 30 (ø 50 IEC160)
108010
1120
30
81
55
32
35
22
78
839
12241245
30
69
64
06
36
ø 30 (ø 50 IEC160)
20
1080
1120
941762
687
36
42
6
78
4
1257961
20
ø 30 (ø 50 IEC160)
528782
10351080
1120
80
26
10
50
63
27
73
36
30
1129
1080ø 30 (ø 50 IEC160)
20
1120
839
10
1140
Right-hand version (viewed from drive side)
Left-hand version (same dimensions as the right-hand version)
Weight (kg)GTLF-5-040: 54,0(including belt drive, without motor).
Motor data: see separate motor list.
For dimensions of discharge flange, see page 78 Flexible connection.
0° 180°
90° 270°
90°0° 270°180°
Fläkt Woods 4897 GB 04.08 35 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
0.5 1 2 3 4 5 6100
200
500
1000
2000
0.2
1
2
3
4 5 6
8
10 12
1
2
4
6
8
10
14
4000 6000 8000 12000 16000 20000
40
50
60
65
686560
500
700
900
1100
1300
1500
1700
qvm3/h
m3/s
J = 0.24 kgm2
∆pt
,Pa
P,k
W
PM
,kW
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700r/min
r/min
,dB 75 80 85
90
95
LwA
v 2 4 6 8 10 12 14 16 18 20 22 24 m/s
20 30 50 60 100 200 300pd Pa
50 100 200 300 400 500 600∆pb+ pd Pa
Fan Charts – Acoustic Data – GTLF-5-040
Belt-driven, double-inlet,forward curved blades
Impeller diameter: 400 mm
0 - 800 4 -2 -3 -5 -4 -8 -10 -15 0 6,7
801 - 1700 3 -3 -3 -4 -5 -7 -10 -15 0 6,1
0 - 800 -1 0 -1 -2 -2 -6 -9 -15 2 4,3
801 - 1700 -3 -2 -1 -1 -2 -6 -8 -15 2,3 3,5
0 - 800 -4 -6 -4 -5 -4 -8 -10 -15 -0,2 3,3
801 - 1700 -6 -7 -4 -4 -5 -7 -10 -15 -0,1 2,9
Correction Kok, dB
Speed range Octave band, mid-frequency, Hz
Sound path r/min 63 125 250 500 1000 2000 4000 8000 ∆LWA(s) ∆LWt(s)
To the outlet duct
To the surroundingof a free-inlet fan
To the outlet of afree-discharge fan
Fläkt Woods 4897 GB 04.08 36 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Dimensions and Weights – GTLB-5-040
Right-hand version with 90°direction of discharge shown
811709567507
551587
40100
11291133
20
36ø 30 (ø 50 IEC160)
108010
1120
30
81
55
32
35
22
78
839
12241245
30
69
64
06
36
ø 30 (ø 50 IEC160)
20
1080
1120
941762
687
36
42
6
78
4
1257961
20
ø 30 (ø 50 IEC160)
528782
10351080
1120
80
26
10
50
63
27
73
36
30
1129
1080ø 30 (ø 50 IEC160)
20
1120
839
10
1140
Right-hand version (viewed from drive side)
Left-hand version (same dimensions as the right-hand version)
Weight (kg)GTLB-5-040: 59,0(including belt drive, without motor).
Motor data: see separate motor list.
For dimensions of discharge flange, see page 78 Flexible connection.
0° 180°
90° 270°
90°0° 270°180°
Dimension on GTHB-5-040 available tospecial order.
Fläkt Woods 4897 GB 04.08 37 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
1 2 3 4 5 6 6.5
100
200
500
1000
2000
3000
3500
0.5
1
2
10
16
1
2
10
18
4000 6000 8000 10000 12000 14000 16000 18000 20000 22000
4 6 8 10 12 14 16 18 20 22 24 26v m/s
20 40 100 200 300 350pd Pa
40 100 200 300 400∆pb+ pd Pa
40
50
60
70
75
8081
80
η,%
140016001800
2000
2200
2400
2600
2800
3000
3200
34003500
qvm3 /h
m3 /s
J = 0.31 kgm2
∆pt
,Pa
P,k
W
PM
,kW
1400
1600
1800
2000
2200
2400
2600
GXLB max 2800
3000
3200
3400GXHB max 3500
r/min
r/min
84 88 92 96 100
1400 .971
1600 .979
1800 .985
2000 .988
2200 .991
2400 .994
2600 .995
2800 .997
3000 .998
3200 .999
3400 13500 1
r/min kη
,dB 80LwA
Fan Charts – Acoustic Data – GTLB-5-040
Belt-driven, double-inlet,backward curved blades
Impeller diameter: 400 mm
= GTHB-5-040available tospecial order.
GTHB
GTLB
0 - 1928 -7 -3 4 -5 -5 -8 -15 -20 0 6,1
1929 - 3500 -11 -5 -9 -4 -5 -5 -12 -18 0 2,1
0 - 1928 -6 -3 2 0 -3 -8 -10 -20 1,9 4,2
1929 - 3500 -15 -8 -9 -2 -4 -7 -13 -20 0,2 1,9
0 - 1928 -15 -7 3 -5 -5 -8 -15 -20 -0,1 5
1929 - 3500 -20 -9 -10 -4 -5 -5 -12 -18 0,1 1,2
Correction Kok, dB
Speed range Octave band, mid-frequency, Hz
Sound path r/min 63 125 250 500 1000 2000 4000 8000 ∆LWA(s) ∆LWt(s)
To the outlet duct
To the surroundingof a free-inlet fan
To the outlet of afree-discharge fan
Fläkt Woods 4897 GB 04.08 38 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Dimensions and Weights – GTLF-5-045
Right-hand version with 90°direction of discharge shown
873794629569
624669
50100
12681281
25
36ø 50
120018
1250
30
90
35
88
38
63
04
946
13361429
30
76
34
41
36
ø 50
25
1200
1250
1022820
737
36
45
8
86
1
14161083
25
ø 50596
8811165
12001250
89
66
75
56
33
61
76
36
30
1268
1200 ø 50
25
1250
946
18
1287
Right-hand version (viewed from drive side)
Left-hand version (same dimensions as the right-hand version)
Weight (kg)GTLF-5-045: 69,0(including belt drive, without motor).
Motor data: see separate motor list.
For dimensions of discharge flange, see page 78 Flexible connection.
0° 180°
90° 270°
90°0° 270°180°
Fläkt Woods 4897 GB 04.08 39 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
1 2 3 4 5 6 7100
200
500
1000
2000
0.5
1
2
6
10
15
1
2
10
18
8000 12000 16000 20000 24000
40
50
60
65
696560
500600700800900100011001200130014001500
qvm3/h
m3/s
J = 0.38 kgm2
∆pt
,Pa
P,k
W
PM
,kW
500
600
700
800
900
1000
1100
1200
1300
1400
1500r/min
r/min
,dB 80 85
90
LwA
η,%
4 6 8 10 12 14 16 18 20 22v m/s
20 40 60 80 100 120 160 200 280pd Pa
60 100 200 300 400 500∆pb+ pd Pa
Fan Charts – Acoustic Data – GTLF-5-045
Belt-driven, double-inlet,forward curved blades
Impeller diameter: 450 mm
0 - 800 4 -2 -3 -5 -4 -8 -10 -15 0 6,7
801 - 1500 3 -3 -3 -4 -5 -7 -10 -15 0 6,1
0 - 800 -1 0 -1 -2 -2 -6 -9 -15 2 4,3
801 - 1500 -3 -2 -1 -1 -2 -6 -8 -15 2,3 3,5
0 - 800 -3 -5 -4 -5 -4 -8 -10 -15 -0,1 3,6
801 - 1500 -5 -6 -4 -4 -5 -7 -10 -15 -0,1 3,1
Correction Kok, dB
Speed range Octave band, mid-frequency, Hz
Sound path r/min 63 125 250 500 1000 2000 4000 8000 ∆LWA(s) ∆LWt(s)
To the outlet duct
To the surroundingof a free-inlet fan
To the outlet of afree-discharge fan
Fläkt Woods 4897 GB 04.08 40 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Dimensions and Weights – GTLB-5-045
Right-hand version with 90°direction of discharge shown
873794629569
624669
50100
12681281
25
36ø 50
120018
1250
30
90
35
88
38
63
04
946
13361429
30
76
34
41
36
ø 50
25
1200
1250
1022820
737
36
45
8
86
1
14161083
25
ø 50596
8811165
12001250
89
66
75
56
33
61
76
36
30
1268
1200 ø 50
25
1250
946
18
1287
Right-hand version (viewed from drive side)
Left-hand version (same dimensions as the right-hand version)
Weight (kg)GTLB-5-045: 74,0(including belt drive, without motor).
Motor data: see separate motor list.
For dimensions of discharge flange, see page 78 Flexible connection.
0° 180°
90° 270°
90°0° 270°180°
Dimension on GTHB-5-045 available tospecial order.
Fläkt Woods 4897 GB 04.08 41 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
1 2 3 4 5 6 7 8 950
100
200
400
600
800
1000
2000
3000
4000
1
2
10
20
2
10
2022
10000 20000 30000
5 10 15 20 25v m/s
20 60 100 200 300 400pd Pa
60 100 200 300 400 500∆pb+ pd Pa
40
50
60
70
75
8081
80
η,%
1400
1600
1800
2000
2200
240025002600
2800
3000
3200
qvm3 /h
m3 /s
J = 0.60 kgm2
∆pt
,Pa
P,k
W
PM
,kW
1400
1600
1800
2000
2200
2400GXLB max 2500
2600
2800
3000
GXHB max 3200r/min
r/min
90 94 98 102
1000 .959
1200 .973
1400 .981
1600 .986
1800 .99
2000 .993
2200 .995
2400 .996
2600 .998
2800 .999
3000 .999
3200 1
r/min kη
,dB 86LwA
Fan Charts – Acoustic Data – GTLB-5-045
Belt-driven, double-inlet,backward curved blades
Impeller diameter: 450 mm
= GTHB-5-045available tospecial order.
GTHB
GTLB
0 - 964 -4 4 3 -5 -5 -8 -13 -17 0 7,6
965 - 1928 -8 -3 1 -7 -3 -8 -14 -18 0 4,5
1929 - 3200 -13 -5 -9 -7 -4 -5 -11 -17 0 1,8
0 - 964 -3 3 1 -2 0 -6 -11 -16 2,9 4,7
965 - 1928 -8 -3 -1 -4 -2 -7 -11 -19 1,2 3,2
1929 - 3200 -13 -8 -9 -4 -3 -7 -12 -19 0,3 1,5
0 - 964 -11 1 2 -5 -5 -8 -13 -17 -0,1 5,9
965 - 1928 -15 -6 0 -7 -3 -8 -14 -18 0 3,4
1929 - 3200 -21 -8 -10 -7 -4 -5 -11 -17 0,1 1,0
Correction Kok, dB
Speed range Octave band, mid-frequency, Hz
Sound path r/min 63 125 250 500 1000 2000 4000 8000 ∆LWA(s) ∆LWt(s)
To the outlet duct
To the surroundingof a free-inlet fan
To the outlet of afree-discharge fan
Fläkt Woods 4897 GB 04.08 42 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Dimensions and Weights – GTLF-5-050
Right-hand version with 90°direction of discharge shown
942864698638
693738
50100
12981350
25
36ø 50
120048
1250
30
97
96
30
40
83
11
946
13901427
30
83
74
85
36
ø 50
25
1200
1250
1041820
723
36
48
8
93
6
14231053
25
ø 50512
8311150
12001250
98
67
43
61
63
94
39
36
30
1298
1200 ø 50
25
1250
946
48
Right-hand version (viewed from drive side)
Left-hand version (same dimensions as the right-hand version)
Weight (kg)GTLF-5-050: 79,0(including belt drive, without motor).
Motor data: see separate motor list.
For dimensions of discharge flange, see page 78 Flexible connection.
0° 180°
90° 270°
90°0° 270°180°
Fläkt Woods 4897 GB 04.08 43 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
1 2 3 4 5 6 7 8 8.5 9100
200
500
1000
2000
0.5
1
2
10
15
1
2
10
18
5000 10000 15000 20000 25000 30000
40
50
60
65
6965 η,%60
4005006007008009001000110012001300
qvm3/h
m3/s
J = 0.54 kgm2
∆pt
,Pa
P,k
W
PM
,kW
400
500
600
700
800
900
1000
1100
1200
1300r/min
r/min
,dB 80 85
90
LwA
4 6 8 10 12 14 16 18 20 22v m/s
30 40 100 200 300pd Pa
40 100 200 300 400 500 600∆pb+ pd Pa
Fan Charts – Acoustic Data – GTLF-5-050
Belt-driven, double-inlet,forward curved blades
Impeller diameter: 500 mm
0 - 800 4 -2 -3 -5 -4 -8 -10 -15 0 6,7
801 - 1300 3 -3 -3 -4 -5 -7 -10 -15 0 6,1
0 - 800 -1 0 -1 -2 -2 -6 -9 -15 2 4,3
801 - 1300 -3 -2 -1 -1 -2 -6 -8 -15 2,3 3,5
0 - 800 -2 -5 -4 -5 -4 -8 -10 -15 -0,1 3,8
801 - 1300 -3 -6 -4 -4 -5 -7 -10 -15 -0,1 3,5
Correction Kok, dB
Speed range Octave band, mid-frequency, Hz
Sound path r/min 63 125 250 500 1000 2000 4000 8000 ∆LWA(s) ∆LWt(s)
To the outlet duct
To the surroundingof a free-inlet fan
To the outlet of afree-discharge fan
Fläkt Woods 4897 GB 04.08 44 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Dimensions and Weights – GTLB-5-050
Right-hand version with 90°direction of discharge shown
942864698638
693738
50100
12981350
25
36ø 50
120048
1250
30
97
96
30
40
83
11
946
13901427
30
83
74
85
36
ø 50
25
1200
1250
1041820
723
36
48
8
93
6
14231053
25
ø 50512
8311150
12001250
98
67
43
61
63
94
39
36
30
1298
1200 ø 50
25
1250
946
48
Right-hand version (viewed from drive side)
Left-hand version (same dimensions as the right-hand version)
Weight (kg)GTLB-5-050: 86,0(including belt drive, without motor).
Motor data: see separate motor list.
For dimensions of discharge flange, see page 78 Flexible connection.
0° 180°
90° 270°
90°0° 270°180°
Dimension on GTHB-5-050 available tospecial order.
Fläkt Woods 4897 GB 04.08 45 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
1 3 5 7 9 1150
100
200
500
1000
2000
3000
4000
0.5
1
2
10
20
25
2
10
20
25
30
10000 20000 30000
10 20v m/s
10 20 40 60 80 100 150 200 250 300 350 400 450pd Pa
40 100 200 300 400 500∆pb+ pd Pa
40
50
60
70
75
80
8280
η,%
1000
1200
1400
1600
1800
200021002200
2400
2600
2800
qvm3 /h
m3 /s
J = 1.00 kgm2
∆pt
,Pa
P,k
W
PM
,kW
1000
1200
1400
1600
1800
2000GXLB max 2100
2200
2400
2600
GXHB max 2800
r/min
r/min
85 90 95 100
1000 .978
1200 .986
1400 .99
1600 .993
1800 .995
2000 .997
2200 .998
2400 .999
2600 .999
2800 1
r/min kη
,dB 80LwA
Fan Charts – Acoustic Data – GTLB-5-050
Belt-driven, double-inlet,backward curved blades
Impeller diameter: 500 mm
= GTHB-5-050available tospecial order.
GTHB
GTLB
0 - 964 1 6 2 -6 -5 -8 -12 -16 0 8,8
965 - 1928 -4 -2 2 -6 -4 -8 -13 -17 0 5,4
1929 - 2800 -8 -3 -4 -2 -7 -6 -11 -15 0 3,5
0 - 964 -1 5 3 -1 -2 -5 -10 -15 2,8 6,1
965 - 1928 -7 -3 1 -2 -3 -7 -11 -17 1,3 4
1929 - 2800 -11 -7 -4 0 -6 -7 -11 -16 0,7 2,8
0 - 964 -5 3 1 -6 -5 -8 -12 -16 -0,2 6,6
965 - 1928 -10 -5 1 -6 -4 -8 -13 -17 -0,1 4,2
1929 - 2800 -14 -6 -5 -2 -7 -6 -11 -15 0 2,6
Correction Kok, dB
Speed range Octave band, mid-frequency, Hz
Sound path r/min 63 125 250 500 1000 2000 4000 8000 ∆LWA(s) ∆LWt(s)
To the outlet duct
To the surroundingof a free-inlet fan
To the outlet of afree-discharge fan
Fläkt Woods 4897 GB 04.08 46 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Dimensions and Weights – GTLF-5-056
Right-hand version with 90°direction of discharge shown
10871034775715
765815
50120
14201462
25
36ø 50
131555
1365
30
10
96
70
84
58
35
1
1030
15411600
30
93
85
48
36
ø 50
25
1315
1365
1148898
790
36
54
6
10
49
15731157
25
ø 50550
9071265
13151365
10
93
81
56
77
42
77
0
36
30
1420
1315 ø 50
25
1365
1030
55
1471
Right-hand version (viewed from drive side)
Left-hand version (same dimensions as the right-hand version)
Weight (kg)GTLF-5-056: 116,0(including belt drive, without motor).
Motor data: see separate motor list.
For dimensions of discharge flange, see page 78 Flexible connection.
0° 180°
90° 270°
90°0° 270°180°
Fläkt Woods 4897 GB 04.08 47 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
v
1 2 4 6 8 10100
200
500
1000
2000
1
2
10
14 15
1
2
10
18
5000 10000 15000 20000 25000 30000 35000
40
60
70
656050
400
500
600
700
800
900
1000
1100
1200
qvm3/h
m3/s
J = 0.97 kgm2
∆pt
,Pa
P,k
W
PM
,kW
400
500
600
700
800
900
1000
1100
1200
r/min
r/min
,dB 80 85
90
η,%
LwA
4 6 8 10 12 14 16 18 m/s
20 40 60 80 100 120 160 200pd Pa
40 100 200 300 400∆pb+ pd Pa
Fan Charts – Acoustic Data – GTLF-5-056
Belt-driven, double-inlet,forward curved blades
Impeller diameter: 560 mm
0 - 800 4 -2 -3 -5 -4 -8 -10 -15 0 6,7
801 - 1200 3 -3 -3 -4 -5 -7 -10 -15 0 6,1
0 - 800 -1 0 -1 -2 -2 -6 -9 -15 2 4,3
801 - 1200 -3 -2 -1 -1 -2 -6 -8 -15 2,3 3,5
0 - 800 -2 -4 -3 -5 -4 -8 -10 -15 -0,1 4,1
801 - 1200 -3 -5 -3 -4 -5 -7 -10 -15 0 3,7
Correction Kok, dB
Speed range Octave band, mid-frequency, Hz
Sound path r/min 63 125 250 500 1000 2000 4000 8000 ∆LWA(s) ∆LWt(s)
To the outlet duct
To the surroundingof a free-inlet fan
To the outlet of afree-discharge fan
Fläkt Woods 4897 GB 04.08 48 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Dimensions and Weights – GTLB-5-056
Right-hand version with 90°direction of discharge shown
10871034775715
765815
50120
14201462
25
36ø 50
131555
1365
30
10
96
70
84
58
35
1
1030
15411600
30
93
85
48
36
ø 50
25
1315
1365
1148898
790
36
54
6
10
49
15731157
25
ø 50550
9071265
13151365
10
93
81
56
77
42
77
0
36
30
1420
1315 ø 50
25
1365
1030
55
1471
Right-hand version (viewed from drive side)
Left-hand version (same dimensions as the right-hand version)
Weight (kg)GTLB-5-056: 126,0(including belt drive, without motor).
Motor data: see separate motor list.
For dimensions of discharge flange, see page 78 Flexible connection.
0° 180°
90° 270°
90°0° 270°180°
Dimension on GTHB-5-056 available tospecial order.
Fläkt Woods 4897 GB 04.08 49 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
1 2 4 6 8 10 12 1450
100
200
500
1000
2000
3000
4000
0.5
1
2
10
20
30
1
4
10
20
3035
10000 20000 30000 40000 50000
2 4 6 8 10 12 14 16 18 20 22 24 26v m/s
20 50 100 200 300 400pd Pa
50 100 200 300 400 500∆pb+ pd Pa
40
50
60
70
75
80
828075
η,%
800
1000
1200
1400
1600
1800
2000
2200
24002500
qvm3 /h
m3 /s
J = 1.50 kgm2
∆pt
,Pa
P,k
W
PM
,kW
800
1000
1200
1400
1600
1800
GXLB max 2000
2200
2400GXHB max 2500
r/min
r/min
85 90 95 100
800 .975
1000 .985
1200 .99
1400 .994
1600 .996
1800 .997
2000 .998
2200 .999
2400 1
2500 1
r/min kη
LwA,dB 80
Fan Charts – Acoustic Data – GTLB-5-056
Belt-driven, double-inlet,backward curved blades
Impeller diameter: 560 mm
= GTHB-5-056available tospecial order.
GTHB
GTLB
0 - 964 0 6 3 -5 -5 -9 -12 -17 0 8,9
965 - 1928 -6 -1 2 -6 -3 -9 -13 -18 0 5,5
1929 - 2500 -9 -3 -4 -3 -7 -6 -11 -14 0 3,2
0 - 964 -2 5 3 0 -1 -6 -10 -15 3,2 5,8
965 - 1928 -8 -2 1 -2 -3 -7 -11 -17 1,3 4,1
1929 - 2500 -13 -6 -4 0 -7 -8 -11 -16 0,3 3
0 - 964 -6 4 3 -5 -5 -9 -12 -17 0,2 7,3
965 - 1928 -12 -3 2 -6 -3 -9 -13 -18 0,3 4,6
1929 - 2500 -15 -5 -4 -3 -7 -6 -11 -14 -0,2 2,8
Correction Kok, dB
Speed range Octave band, mid-frequency, Hz
Sound path r/min 63 125 250 500 1000 2000 4000 8000 ∆LWA(s) ∆LWt(s)
To the outlet duct
To the surroundingof a free-inlet fan
To the outlet of afree-discharge fan
Fläkt Woods 4897 GB 04.08 50 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Dimensions and Weights – GTLF-5-063
Right-hand version with 90°direction of discharge shown
11731144861801
851901
50120
15041547
25
36ø 50
139559
1445
30
12
15
78
65
04
38
6
1070
16441732
30
10
36
60
2
36
ø 50
25
1395
1445
1244963
845
36
59
0
11
53
16931227
25
ø 50546
9461345
13951445
12
24
90
67
58
47
77
7
36
30
1504
1395 ø 50
25
1445
1070
59
1533
Right-hand version (viewed from drive side)
Left-hand version (same dimensions as the right-hand version)
Weight (kg)GTLF-5-063: 142,0(including belt drive, without motor).
Motor data: see separate motor list.
For dimensions of discharge flange, see page 78 Flexible connection.
0° 180°
90° 270°
90°0° 270°180°
Fläkt Woods 4897 GB 04.08 51 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
2 3.00 4 6 8 10 12100
200
500
1000
1800
1
2
10
18
2
4
10
2022
10000 20000 30000 40000
40
60
70
7170
6560
300400500
600
700
800
900
1000
qvm3/h
m3/s
J = 1.52 kgm2
∆pt
,Pa
P,k
W
PM
,kW
300
400
500
600
700
800
900
1000r/min
r/min
,dB 80 85
90
η,%
4 6 8 10 12 14 16 18v m/s
20 40 60 80 100 120 160 200pd Pa
40 100 160 200 300 400∆pb+ pd Pa
LwA
Fan Charts – Acoustic Data – GTLF-5-063
Belt-driven, double-inlet,forward curved blades
Impeller diameter: 630 mm
0 - 800 4 -2 -3 -5 -4 -8 -10 -15 0 6,7
801 - 1000 3 -3 -3 -4 -5 -7 -10 -15 0 6,1
0 - 800 -1 0 -1 -2 -2 -6 -9 -15 2 4,3
801 - 1000 -3 -2 -1 -1 -2 -6 -8 -15 2,3 3,5
0 - 800 -1 -4 -3 -5 -4 -8 -10 -15 -0,1 4,4
801 - 1000 -2 -5 -3 -4 -5 -7 -10 -15 0 4,0
Correction Kok, dB
Speed range Octave band, mid-frequency, Hz
Sound path r/min 63 125 250 500 1000 2000 4000 8000 ∆LWA(s) ∆LWt(s)
To the outlet duct
To the surroundingof a free-inlet fan
To the outlet of afree-discharge fan
Fläkt Woods 4897 GB 04.08 52 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Dimensions and Weights – GTLB-5-063
Right-hand version with 90°direction of discharge shown
11731144861801
851901
50120
15041547
25
36ø 50
139559
1445
30
12
15
78
65
04
38
6
1070
16441732
30
10
36
60
2
36
ø 50
25
1395
1445
1244963
845
36
59
0
11
53
16931227
25
ø 50546
9461345
13951445
12
24
90
67
58
47
77
7
36
30
1504
1395 ø 50
25
1445
1070
59
1533
Right-hand version (viewed from drive side)
Left-hand version (same dimensions as the right-hand version)
Weight (kg)GTLB-5-063: 163,0(including belt drive, without motor).
Motor data: see separate motor list.
For dimensions of discharge flange, see page 78 Flexible connection.
0° 180°
90° 270°
90°0° 270°180°
Dimension on GTHB-5-063 available tospecial order.
Fläkt Woods 4897 GB 04.08 53 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
2 4 6 8 10 12 14 1650
100
200
500
1000
2000
3000
3500
2
10
20
3035
4
10
20
3035
10000 20000 30000 40000 50000
4 6 8 10 12 14 16 18 20 22 24v m/s
20 50 100 200 300pd Pa
50 100 200 300 400∆pb+ pd Pa
40
50
60
70
75
80
8380
η,%
800
1000
1200
1400
1600
1800
20002100
qvm3 /h
m3 /s
J = 2.70 kgm2
∆pt
,Pa
P,k
W
PM
,kW
800
1000
1200
1400
GXLB max 1600
1800
2000GXHB max 2100
r/min
r/min
85 90 95 100
600 .972
800 .985
1000 .991
1200 .995
1400 .997
1600 .998
1800 .999
2000 1
2100 1
r/min kη
,dB 80LwA
Fan Charts – Acoustic Data – GTLB-5-063
Belt-driven, double-inlet,backward curved blades
Impeller diameter: 630 mm
= GTHB-5-063available tospecial order.
GTHB
GTLB
0 - 815 -6 4 2 -6 -5 -8 -11 -15 0 7,1
816 - 1631 -10 -6 0 -7 -3 -8 -12 -15 0 3,6
1632 - 2100 -12 -3 -5 -4 -7 -5 -10 -14 0 2,9
0 - 815 -4 4 1 -3 -5 -8 -15 -20 0,2 6,9
816 - 1631 -9 -6 0 -4 -6 -8 -16 -21 -0,9 4,4
1632 - 2100 -12 -5 -6 -2 -4 -7 -14 -19 0,3 2,5
0 - 815 -11 2 2 -6 -5 -8 -11 -15 0 6,1
816 - 1631 -15 -8 0 -7 -3 -8 -12 -15 0,2 3,1
1632 - 2100 -17 -5 -5 -4 -7 -5 -10 -14 0 2,3
Correction Kok, dB
Speed range Octave band, mid-frequency, Hz
Sound path r/min 63 125 250 500 1000 2000 4000 8000 ∆LWA(s) ∆LWt(s)
To the outlet duct
To the surroundingof a free-inlet fan
To the outlet of afree-discharge fan
Fläkt Woods 4897 GB 04.08 54 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Dimensions and Weights – GTLF-5-071
Right-hand version with 90°direction of discharge shown
12701244958898
9581018
60120
16191625
25
36ø 50
151059
1560
30
13
63
88
45
65
43
5
1134
17821883
30
11
60
67
5
36
ø 50
25
1510
1560
13331014
844
36
64
1
12
76
18551330
25
ø 50562
10111460
15101560
13
67
10
02
84
25
23
74
36
30
1609
1510 ø 50
25
1560
1134
59
1655
Right-hand version (viewed from drive side)
Left-hand version (same dimensions as the right-hand version)
Weight (kg)GTLF-5-071: 171,0(including belt drive, without motor).
Motor data: see separate motor list.
For dimensions of discharge flange, see page 78 Flexible connection.
0° 180°
90° 270°
90°0° 270°180°
Fläkt Woods 4897 GB 04.08 55 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
2 3 5 10 15100
200
500
1000
1800
1
2
10
20 22
2
4
10
20
26
10000 20000 30000 40000 50000
40
60
71.4
706560
300400
500
600
700
800850
qvm3/h
m3/s
J = 3.60 kgm2
∆pt
,Pa
P,k
W
PM
,kW
300
400
500
600
700
800
850r/min
r/min
,dB 80 85
90
70
η,%
LwA
4 6 8 10 12 14 16 18v m/s
20 40 60 80 100 120 160 200pd Pa
40 100 160 200 300 400∆pb+ pd Pa
Fan Charts – Acoustic Data – GTLF-5-071
Belt-driven, double-inlet,forward curved blades
Impeller diameter: 710 mm
0 - 800 4 -2 -3 -5 -4 -8 -10 -15 0 6,7
801 - 850 3 -3 -3 -4 -5 -7 -10 -15 0 6,1
0 - 800 -1 0 -1 -2 -2 -6 -9 -15 2 4,3
801 - 850 -3 -2 -1 -1 -2 -6 -8 -15 2,3 3,5
0 - 800 0 -3 -3 -5 -4 -8 -10 -15 -0,1 4,9
801 - 850 -1 -4 -3 -4 -5 -7 -10 -15 0 4,4
Correction Kok, dB
Speed range Octave band, mid-frequency, Hz
Sound path r/min 63 125 250 500 1000 2000 4000 8000 ∆LWA(s) ∆LWt(s)
To the outlet duct
To the surroundingof a free-inlet fan
To the outlet of afree-discharge fan
Fläkt Woods 4897 GB 04.08 56 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Dimensions and Weights – GTLB-5-071
Right-hand version with 90°direction of discharge shown
12701244958898
9581018
60120
16191625
25
36ø 50
151059
1560
30
13
63
88
45
65
43
5
1134
17821883
30
11
60
67
5
36
ø 50
25
1510
1560
13331014
844
36
64
1
12
76
18551330
25
ø 50562
10111460
15101560
13
67
10
02
84
25
23
74
36
30
1609
1510 ø 50
25
1560
1134
59
1655
Right-hand version (viewed from drive side)
Left-hand version (same dimensions as the right-hand version)
Weight (kg)GTLB-5-071: 192,0(including belt drive, without motor).
Motor data: see separate motor list.
For dimensions of discharge flange, see page 78 Flexible connection.
0° 180°
90° 270°
90°0° 270°180°
Dimension on GTHB-5-071 available tospecial order.
Fläkt Woods 4897 GB 04.08 57 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
2 6 10 14 18 2250
100
200
500
1000
2000
3000
3500
2
10
20
30
4045
4
10
20
30
40
50
10000 20000 30000 40000 50000 60000 70000
4 6 8 10 12 14 16 18 20 22 24 26v m/s
20 50 100 200 300 400pd Pa
50 100 200 300 400 500∆pb+ pd Pa
40
50
60
70
75
80
83
η,%
800
1000
1200
14001450
1600
1800
1900
qvm3 /h
m3 /s
J = 5.40 kgm2
∆pt
,Pa
P,k
W
PM
,kW
800
1000
1200
1400GXLB max 1450
1600
1800
GXHB max 1900r/min
r/min
85 90 95 100 105
800 .992
1000 .995
1200 .997
1400 .999
1600 .999
1800 1
1900 1
r/min kη
,dB 80LwA
Fan Charts – Acoustic Data – GTLB-5-071
Belt-driven, double-inlet,backward curved blades
Impeller diameter: 710 mm
= GTHB-5-071available tospecial order.
GTHB
GTLB
0 - 815 -6 2 0 -5 -3 -9 -14 -17 0 5,8
816 - 1631 -11 -6 -2 -6 -3 -8 -13 -18 0 2,9
1632 - 1900 -12 -3 -4 -4 -8 -5 -11 -15 0 2,9
0 - 815 -4 1 0 -3 -4 -9 -18 -23 0 5,7
816 - 1631 -10 -7 -2 -2 -6 -9 -17 -24 -0,8 3,7
1632 - 1900 -12 -4 -5 -2 -5 -7 -15 -20 -0,1 3
0 - 815 -10 0 0 -5 -3 -9 -14 -17 0,2 4,7
816 - 1631 -15 -8 -2 -6 -3 -8 -13 -18 -0,1 2,6
1632 - 1900 -16 -5 -4 -4 -8 -5 -11 -15 -0,3 2,7
Correction Kok, dB
Speed range Octave band, mid-frequency, Hz
Sound path r/min 63 125 250 500 1000 2000 4000 8000 ∆LWA(s) ∆LWt(s)
To the outlet duct
To the surroundingof a free-inlet fan
To the outlet of afree-discharge fan
Fläkt Woods 4897 GB 04.08 58 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Dimensions and Weights – GTLB/GTHB-5-080
15271115
1015
106525 25Lav
1216 40
L
16
10
10
0
16
48
10
15
59
3
10
15
40
59
3
215
40
Right-hand version (viewed from drive side) Left-hand version(same dimensionsas the right-handversion)
0°
0°
1470
1527
21511151015
1065
1015
Lav
L
40
2525
13
95
10
0
40
90°
90°
GTLB-5-080-c-d1-00 100-180 2200 - 4 390
GTHB-5-080-c-d1-00 160/180 2200 - 4 440
GTHB-5-080-c-d1-00 200/225 2400 1175 6 450
GTHB-5-080-c-d1-00 250 2600 1275 6 480
Fan Motor size, IEC
Length Lav Number of anti-vibration mountings
Weight, kg (without motor)
GTLB-5-080-c-d3-00 100-180 1950 - 4 390
GTHB-5-080-c-d3-00 160/180 1950 - 4 430
GTHB-5-080-c-d3-00 200/225 2180 1050 6 450
GTHB-5-080-c-d3-00 250 2350 1150 6 480
Fan Motor size, IEC
Length Lav Number of anti-vibration mountings
Weight, kg (without motor)
Fläkt Woods 4897 GB 04.08 59 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Dimensions and Weights – GTLB/GTHB-5-080
Right-hand version (viewed from drive side) Left-hand version(same dimensionsas the right-handversion)
1527
1115215
106525 Lav 1015
25
L – 50 mm
200
200
L
1470
40 1
00
14
01
10
65
10
15
11
15
50
180°
180°
121640
16
10
10
15
10
0
40
14
21
01
54
0
14
2 25
L
25
40
15271115 215
1015
1065Lav
270°
270°
GTLB-5-080-c-d5-00 100-180 2400 - 4 410
GTHB-5-080-c-d5-00 160/180 2400 - 4 450
GTHB-5-080-c-d5-00 200/225 2600 1100 6 470
GTHB-5-080-c-d5-00 250 2800 1300 6 490
Fan Motor size, IEC
Length Lav Number of anti-vibration mountings
Weight, kg (without motor)
GTLB-5-080-c-d7-00 100-180 1950 - 4 390
GTHB-5-080-c-d7-00 160/180 1950 - 4 430
GTHB-5-080-c-d7-00 200/225 2150 1050 6 450
GTHB-5-080-c-d7-00 250 2350 1150 6 470
Fan Motor size, IEC
Length Lav Number of anti-vibration mountings
Weight, kg (without motor)
Fläkt Woods 4897 GB 04.08 60 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Dimensions and Weights – GTLB/GTHB-5-080
121640494
14701015
107150
1115
14
70 1
01
5
LB ø
55
HB
ø6
0
59
8
45
31
01
54
0
96
0
15
08
40
Fan casing
1095
ø 10
ø 1025
20
A B
1015 40
5 x
21
2
10
95
10
15
25
20
5 x 212
Discharge flange
ø 150
M14
182
214
ø 12
40
Anti-vibration mounting, GTLZ-42-080-d-0
100 - 180 1 4
200 - 250 2 6
Motor size, IEC
d Number of anti-vibration mountings
Fläkt Woods 4897 GB 04.08 61 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Fan Charts – Acoustic Data – GTLB/GTHB-5-080
Belt-driven, double-inlet,backward curved blades
Impeller diameter: 800 mm
4 8 12 16 20 24100
200
500
1000
2000
3000
3500
1.5 2
3
10
20
30
4045
50
4
10
20
30
40
50
20000 30000 40000 50000 60000 70000 80000
20 40 60 80 100 150 200 250pd Pa
100 200 250 300 350 400∆pb+ pd Pa
40
60
70
80
85
η,%
600
700
800
900
1000
1100
1200
13001350
1400
1500
16001660
qvm3/h
m3/s
∆pt
,Pa
P,k
W
PM
,kW
600
700
800
900
1000
1100
1200
1300GXLBmax 1350
1400
1500
1600GXHBmax 1660
r/min
r/min
600 .987
700 .991
800 .993
900 .995
1000 .996
1100 .997
1200 .998
1300 .999
1400 .999
1500 1
1600 1
1660 1
r/min η-korr
J = 5.50 kgm2
JH
L
B
B= 7.70 kgm2
LwA,dB 85 90 95 100 105
v 4 6 8 10 12 14 16 18 20 22 24 m/s
250 300
GTHB
GTLB
0 - 409 2 -1 -3 -3 -2 -14 -22 -28 0 6,1
410 - 815 -6 0 -3 -2 -3 -13 -20 -26 0 4,7
816 - 1631 -10 -7 -2 -2 -3 -11 -18 -24 0 3,3
1632 - 1660 -12 -8 -4 -2 -4 -8 -16 -21 0 2,6
0 - 409 4 0 -6 -8 -12 -17 -24 -29 -6,3 12,3
410 - 815 -3 2 -3 -8 -10 -17 -24 -28 -5,0 9,6
816 - 1631 -8 -8 2 -7 -10 -15 -23 -27 -3,5 7,0
1632 - 1660 -12 -8 -7 1 -9 -13 -19 -25 -0,6 3,3
0 - 409 -2 -2 -3 -3 -2 -14 -22 -28 0,1 4,6
410 - 815 -10 -1 -3 -2 -3 -13 -20 -26 -0,1 4,2
816 - 1631 -14 -8 -2 -2 -3 -11 -18 -24 0,1 3,0
1632 - 1660 -16 -9 -4 -2 -4 -8 -16 -21 0 2,5
Correction Kok, dB
Speed range Octave band, mid-frequency, Hz
Sound path r/min 63 125 250 500 1000 2000 4000 8000 ∆LWA(s) ∆LWt(s)
To the outlet duct
To the surroundingof a free-inlet fan
To the outlet of afree-discharge fan
Fläkt Woods 4897 GB 04.08 62 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Dimensions and Weights – GTLB/GTHB-5-090
16541238
1138
118825 25Lav
1366 45
L
17
88
10
0
18
24
11
38
64
6
11
38
40
64
6
218
40
Right-hand version (viewed from drive side) Left-hand version(same dimensionsas the right-handversion)
0°
0°
1648
1654
21812381138
1188
1138
Lav
L
40
2525
15
50
10
0
40
90°
90°
GTLB-5-090-c-d1-00 100-180 2400 1175 6 480
GTHB-5-090-c-d1-00 160/180 2400 1175 6 520
GTHB-5-090-c-d1-00 200/225 2600 1275 6 560
GTHB-5-090-c-d1-00 250 2800 1375 6 580
Fan Motor siz, IEC Length Lav Number of anti-vibration mountings
Weight, kg (without motor)
GTLB-5-090-c-d3-00 100-180 2100 1025 6 480
GTHB-5-090-c-d3-00 160/180 2100 1025 6 530
GTHB-5-090-c-d3-00 200/225 2300 1125 6 550
GTHB-5-090-c-d3-00 250 2500 1225 6 590
Fan Motor size, IEC Length Lav Number of anti-vibration mountings
Weight, kg (without motor)
Fläkt Woods 4897 GB 04.08 63 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Dimensions and Weights – GTLB/GTHB-5-090
Right-hand version (viewed from drive side) Left-hand version(same dimensionsas the right-handversion)
1654
1238218
118825 Lav 1138
25
L – 50 mm
200
200
L
1648
40 1
00
15
46
11
88
11
38
12
38
50
180°
180°
136645
17
88
11
38
10
0
40
14
41
13
84
0
14
4 25
L
25
40
16541238 218
1138
1188Lav
270°
270°
GTLB-5-090-c-d5-00 100-180 2600 1000 6 500
GTHB-5-090-c-d5-00 160/180 2600 1100 6 560
GTHB-5-090-c-d5-00 200/225 2800 1200 6 580
GTHB-5-090-c-d5-00 250 3000 1400 6 620
Fan Motor size, IEC Length Lav Number of anti-vibration mountings
Weight, kg (without motor)
GTLB-5-090-c-d7-00 100-180 2100 1025 6 480
GTHB-5-090-c-d7-00 160/180 2100 1025 6 530
GTHB-5-090-c-d7-00 200/225 2300 1125 6 550
GTHB-5-090-c-d7-00 250 2500 1225 6 590
Fan Motor siz, IEC Length Lav Number of anti-vibration mountings
Weight, kg (without motor)
Fläkt Woods 4897 GB 04.08 64 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Dimensions and Weights – GTLB/GTHB-5-090
136640557
15901138
119450
1238
16
48 1
13
8
LB ø
60
HB
ø6
5
67
0
49
71
13
84
0
10
76
16
75
40
Fan casing
1218
ø 10
ø 1023
18
A B
1138 40
5 x
23
6
12
18
11
38
23
18
5 x 236
Discharge flange
ø 150
M14
182
214
ø 12
40
Anti-vibration mounting, GTLZ-42-090-d-0
100 - 132 1 4
160 - 250 2 6
Motor size, IEC
d Number of anti-vibration mountings
Fläkt Woods 4897 GB 04.08 65 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
5 10 15 20 25 30100
200
500
1000
2000
3000
3500
2 3
10
20
30
40
50
60 70
4
10
20
30
40
50
6070
30000 50000 70000 90000
30 50 100 200 300pd Pa
40 100 200 300 400∆pb+ pd Pa
60
70
80
8586
85
η,%
600
700
800
900
1000
1100
1200
1300
14001480
qvm3/h
m3/s
∆pt
,Pa
P,k
W
PM
,kW
600
700
800
900
1000
1100
GXLBmax 1200
1300
1400
GXHBmax 1480r/min
r/min
600 .993
700 .995
800 .997
900 .998
1000 .998
1100 .999
1200 .999
1300 1
1400 1
1480 1
r/min η-korr
J = 8.2 kgm2
JH
L
B
B=11.3 kgm2
40
v 4 6 8 10 12 14 16 18 20 22 m/s
,dB 90 95 100wAL105
Fan Charts – Acoustic Data – GTLB/GTHB-5-090
Belt-driven, double-inlet,backward curved blades
Impeller diameter: 900 mm
GTHB
GTLB
0 - 409 1 -2 -4 -3 -2 -14 -22 -29 0 5,4
410 - 815 -7 0 -3 -3 -3 -10 -20 -27 0 4,5
816 - 1480 -11 -8 -2 -1 -4 -11 -19 -25 0 3,3
0 - 409 4 -2 -7 -10 -15 -20 -26 -33 -8,4 13,8
410 - 815 -4 3 -5 -10 -13 -16 -25 -31 -6,4 11
816 - 1480 -8 -9 2 -9 -10 -15 -23 -29 -3,8 7,1
0 - 409 -2 -3 -4 -3 -2 -14 -22 -29 0 4,3
410 - 815 -10 -1 -3 -3 -3 -10 -20 -27 -0,1 4,1
816 - 1480 -14 -9 -2 -1 -4 -11 -19 -25 0 3,2
Correction Kok, dB
Speed range Octave band, mid-frequency, Hz
Sound path r/min 63 125 250 500 1000 2000 4000 8000 ∆LWA(s) ∆LWt(s)
To the outlet duct
To the surroundingof a free-inlet fan
To the outlet of afree-discharge fan
Fläkt Woods 4897 GB 04.08 66 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Dimensions and weights available onrequest
Dimensions and Weights – GTLB-5-100/GTHB-5-100 – 140
Fläkt Woods 4897 GB 04.08 67 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
5 15 25 35100
200
500
1000
2000
3000
3500
3 4
10
20
30
40
60
8090
4
10
20
30
40
5060
80
100
20000 40000 60000 80000 100000 140000
10 20v m/s
30 50 100 200 300pd Pa
40 100 200 300∆pb+ pd Pa
60
75
80
η,%
500
600
700
800
900
10001030
1100
1200
13001360
qvm3/h
m3/s
∆pt
,Pa
P,k
W
PM
,kW
500
600
700
800
900
1000GXLBmax 1030
1100
1200
1300GXHBmax 1360
r/min
r/min
J =12.3 kgm2
JH =15.1 kgm2L
B
B
83
500 .994
600 .996
700 .997
800 .998
900 .999
1000 .999
1100 1
1200 1
1300 1
1360 1
r/min η-korr
,dB 88 92 96 100 104
40
LwA
Fan Charts – Acoustic Data – GTLB/GTHB-5-100
Belt-driven, double-inlet,backward curved blades
Impeller diameter: 1000 mm
GTHB
GTLB
0 - 409 4 1 -2 -1 -4 -14 -21 -27 0 7,5
410 - 815 -2 2 -2 -1 -4 -13 -20 -26 0 6,1
816 - 1360 -8 -7 -1 0 -5 -13 -19 -26 0 4
0 - 409 5 2 -3 -4 -8 -16 -23 -26 -2,9 10,6
410 - 815 -2 4 -3 -5 -8 -13 -21 -25 -2,8 9
816 - 1360 -5 -6 2 -6 -7 -14 -20 -25 -2,2 6,4
0 - 409 1 0 -2 -1 -4 -14 -21 -27 -0,2 6,4
410 - 815 -5 1 -2 -1 -4 -13 -20 -26 -0,1 5,5
816 - 1360 -11 -8 -1 0 -5 -13 -19 -26 0 3,8
Correction Kok, dB
Speed range Octave band, mid-frequency, Hz
Sound path r/min 63 125 250 500 1000 2000 4000 8000 ∆LWA(s) ∆LWt(s)
To the outlet duct
To the surroundingof a free-inlet fan
To the outlet of afree-discharge fan
5 10 20 30 40100
200
500
1000
2000
3000
2
10
20
30
40
60
4
10
20
30
40
60
20000 60000 100000 140000
4 6 8 10 12 14 16 18 20 22 24v m/s
30 50 100 200 300pd Pa
40 100 200 300 400 500∆pb+ pd Pa
50
60
70
80
85
η,%
400
500
600
700
800
900
1000
1100
qvm3/h
m3/s
J = 23.5 kgm2
∆pt
,Pa
P,kW
PM
,kW
400
500
600
700
800
900
1000
1100r/min
r/min
,dB 85 90 95 100 105
400 .993
500 .995
600 .997
700 .998
800 .999
900 .999
1000 .999
1100 1
r/min η-korr
LwA
Fläkt Woods 4897 GB 04.08 68 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Fan Charts – Acoustic Data – GTLB/GTHB-5-112
Belt-driven, double-inlet,backward curved blades
Impeller diameter: 1200 mm
0 - 401 0 -1 -1 -2 -5 -8 -14 -27 0 5,7
401 - 801 0 1 0 -3 -5 -8 -13 -24 0 6,3
801 - 1100 -4 -2 0 -2 -5 -8 -14 -25 0 5
0 - 401 -1 -3 -3 -5 -6 -7 -14 -27 -1 5,2
401 - 801 -2 1 -2 -4 -5 -7 -13 -24 -0,2 5,6
801 - 1100 -6 -5 0 -4 -6 -7 -14 -25 -0,5 4,4
0 - 401 -3 -2 -1 -2 -5 -8 -14 -27 0 4,9
401 - 801 -3 0 0 -3 -5 -8 -13 -24 -0,1 5,6
801 - 1100 -7 -3 0 -2 -5 -8 -14 -25 0,1 4,4
correction Kok, dB
Speed range Octave band, mid-frequency, Hz
Sound path r/min 63 125 250 500 1000 2000 4000 8000 ∆LWA(s) ∆LWt(s)
To the outlet duct
To the surroundingof a free-inlet fan
Till utlopp frånfriblåsande fläkt
5 10 20 30 40 50100
200
500
1000
2000
3000
2
10
20
30
40
60
80
10
20
30
40
60
8090
20000 60000 100000 140000 180000
4 6 8 10 12 14 16 18 20 22 24v m/s
10 30 50 100 200 300pd Pa
40 100 200 300 400 500∆pb+ pd Pa
50
60
70
75
80
85
η,%
400
500
600
700
800
900
1000
qvm3/h
m3/s
J = 57.3 kgm2
∆pt
,Pa
P,kW
PM
,kW
400
500
600
700
800
900
1000r/min
r/min
,dB 85 90 95 100
105
400 .995
500 .997
600 .998
700 .999
800 .999
900 1
1000 1
r/min η-korr
6
LwA
Fläkt Woods 4897 GB 04.08 69 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Fan Charts – Acoustic Data – GTLB/GTHB-5-125
Belt-driven, double-inlet,backward curved blades
Impeller diameter: 1250 mm
0 - 401 0 -1 -1 -2 -5 -8 -14 -27 0 5,7
401 - 801 0 1 0 -3 -5 -8 -13 -24 0 6,3
801 - 1100 -4 -2 0 -2 -5 -8 -14 -25 0 5
0 - 401 -1 -3 -3 -5 -6 -7 -14 -27 -1 5,2
401 - 801 -2 1 -2 -4 -5 -7 -13 -24 -0,2 5,6
801 - 1100 -6 -5 0 -4 -6 -7 -14 -25 -0,5 4,4
0 - 401 -3 -2 -1 -2 -5 -8 -14 -27 0 4,9
401 - 801 -3 0 0 -3 -5 -8 -13 -24 -0,1 5,6
801 - 1100 -7 -3 0 -2 -5 -8 -14 -25 0,1 4,4
Correction Kok, dB
Speed range Octave band, mid-frequency, Hz
Sound path r/min 63 125 250 500 1000 2000 4000 8000 ∆LWA(s) ∆LWt(s)
To the outlet duct
To the surroundingof a free-inlet fan
To the outlet of afree-discharge fan
10 20 30 40 50 60 65100
200
500
1000
2000
3000
5
10
20
30
40
60
100110
15
20
30
40
50
60
80
100
120
60000 100000 140000 180000 220000
4 6 8 10 12 14 16 18 20 22 24v m/s
30 50 100 200 300pd Pa
100 200 300 400 500∆pb+ pd Pa
50
60
70
80
85
η,%
400
500
600
700
800
900
qvm3/h
m3/s
J = 110 kgm2
∆pt
,Pa
P,kW
PM
,kW
400
500
600
700
800
900r/min
r/min
,dB 90 95 100 105
400 .997
500 .998
600 .999
700 .999
800 1
900 1
r/min η-korr
LwA
Fläkt Woods 4897 GB 04.08 70 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Fan Charts – Acoustic Data – GTLB/GTHB-5-140
Belt-driven, double-inlet,backward curved blades
Impeller diameter: 1400 mm
0 - 401 0 -1 -1 -2 -5 -8 -14 -27 0 5,7
401 - 801 0 1 0 -3 -5 -8 -13 -24 0 6,3
801 - 900 -4 -2 0 -2 -5 -8 -14 -25 0 5
0 - 401 -1 -3 -3 -5 -6 -7 -14 -27 -1 5,2
401 - 801 -2 1 -2 -4 -5 -7 -13 -24 -0,2 5,6
801 - 900 -6 -5 0 -4 -6 -7 -14 -25 -0,5 4,4
0 - 401 -2 -1 -1 -2 -5 -8 -14 -27 0 5,3
401 - 801 -2 1 0 -3 -5 -8 -13 -24 0 5,9
801 - 900 -6 -2 0 -2 -5 -8 -14 -25 0,1 4,7
Correction Kok, dB
Speed range Octave band, mid-frequency, Hz
Sound path r/min 63 125 250 500 1000 2000 4000 8000 ∆LWA(s) ∆LWt(s)
To the outlet duct
To the surroundingof a free-inlet fan
Till utlopp frånfriblåsande fläkt
Fläkt Woods 4897 GB 04.08 71 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Motor Data – Single-speed Motors, 50 Hz
2 poles = 3000 r/min
Code suffix for voltage (c)1 = 220–240 V delta/380–415 VY
2 = 380–415 V delta/660–690 VY
1) Correction factorsThe current values in the tables are applicable to motors wound for400 V. All motors can be used for voltages between 380 and 415 V.
Motors with voltage code c=1 can be connected in D to operate in therange of 220–240 V.Motors with voltage code c=2 can be connected in Y to operate in therange of 660–690 V.The correction factors on the current in the range of 400 V will thenbe: 220–240 V = 1.73 and 660–690 V = 0.58.
The motors can also be wound for 500 V, and the voltage code is thenc=5. The correction factor on the current at 400 V is then 0.8.
The speeds, efficiencies and power factors are applicable at 230,400, 690 and 500 V.
Temperature sensors in the stator winding, code suffix (d)0 = without1 = with bimetal temperature contacts2 = with thermistor
71 APAL-2-00037-c-0-2 0,37 2810 0,85 3 3,2 74 8
71 APAL-2-00055-c-0-2 0,55 2800 1,23 2,9 3 76 9
80 APAL-2-00075-c-0-2 0,75 2790 1,57 2,9 3,1 80 12
80 APAL-2-00110-c-0-2 1,1 2810 2,32 3 2,9 80 12
90S/L APAL-2-00150-c-0-2 1,5 2870 3,41 2,8 3 84 17
90S/L APAL-2-00220-c-0-2 2,2 2840 4,48 2,8 3 83 19
100L APAL-2-00300-c-0-2 3 2880 5,75 2,6 2,8 86 26
112M APAL-2-00400-c-0-2 4 2890 7,55 2,7 3,1 87 33
132M APAL-2-00550-c-0-2 5,5 2870 10,3 2,7 3,2 88 37
132S APAL-2-00750-c-0-2 7,5 2925 13,6 2,5 2,9 89 67
160M APAL-2-01100-c-2-2 11 2945 20 2,6 3,1 90 104
160M APAL-2-01500-c-2-2 15 2945 27 2,5 3,2 91 111
160L APAL-2-01850-c-2-2 18,5 2945 33,1 2,6 3,3 92 126
180M APAL-2-02200-c-2-2 22 2950 38,7 2,8 3,1 92 172
200L APAL-2-03000-c-2-2 30 2965 53,1 2,8 2,8 93 239
200L APAL-2-03700-c-2-2 37 2965 65,3 2,9 2,9 93 253
225S/M APAL-2-04500-c-2-2 45 2965 75,4 2,6 3,5 94 411
250S/M APAL-2-05500-c-2-2 55 2960 91 2,8 3 94 490
280S/M APAL-2-07500-c-2-2 75 2975 129 2,3 2,8 94 655
280S/M APAL-2-09000-c-2-2 90 2970 153 2,4 2,8 94 705
315S/M APAL-2-11000-c-2-2 110 2975 188 2,3 2,8 95 807
315S/M APAL-2-13200-c-2-2 132 2970 223 2,3 2,8 95 937
315S/M APAL-2-16000-c-2-2 160 2970 269 2,2 2,5 95 1010
Ordering code Ratedoutput,
kW
Speed,r/min
At ratedoutput 1)
Current at400 V, ca A
Mst
M
Mmax
M
Efficiency, η %
Weight,kg
Motor sizeIEC
Motor versions, code suffix (e)2 = Fläkt Woods accepted
motor
Fläkt Woods 4897 GB 04.08 72 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Motor Data – Single-speed Motors, 50 Hz
4 poles = 1500 r/min
71 APAL-4-00025-c-0-2 0,25 1410 0,71 3 3,1 73 9
71 APAL-4-00037-c-0-2 0,37 1395 1,04 2,7 2,8 74 9
80 APAL-4-00055-c-0-2 0,55 1430 1,36 2,6 2,8 75 12
80 APAL-4-00075-c-0-2 0,75 1415 1,71 2,4 2,6 76 13
90S/L APAL-4-00110-c-0-2 1,1 1440 2,53 3 3 81 17
90S/L APAL-4-00150-c-0-2 1,5 1420 3,19 2,7 2,7 82 19
100L APAL-4-00220-c-0-2 2,2 1420 4,61 2,7 2,9 83 26
100L APAL-4-00300-c-0-2 3 1410 5,94 2,7 2,7 85 28
112M APAL-4-00400-c-0-2 4 1430 7,62 2,7 2,8 87 32
132M APAL-4-00550-c-0-2 5,5 1450 10,6 2,4 3 88 37
132M APAL-4-00750-c-0-2 7,5 1470 14,2 2,5 2,8 89 59
160M APAL-4-01100-c-2-2 11 1460 21 2,2 2,5 90 105
160L APAL-4-01500-c-2-2 15 1455 28,4 2,2 2,4 91 121
180M APAL-4-01850-c-2-2 18,5 1470 34,5 2,7 2,8 92 175
180M APAL-4-02200-c-2-2 22 1470 41,4 2,8 2,8 92 181
200M APAL-4-03000-c-2-2 30 1475 54,8 2,2 2,5 93 227
225S/M APAL-4-03700-c-2-2 37 1480 65,4 2,3 2,7 93 350
225S/M APAL-4-04500-c-2-2 45 1475 78,9 2,3 2,7 94 382
250S/M APAL-4-05500-c-2-2 55 1475 94,4 2,3 2,6 93 460
280S/M APAL-4-07500-c-2-2 75 1485 128 2,1 2,4 94 735
280S/M APAL-4-09000-c-2-2 90 1485 155 2,4 2,5 94 802
315S/M APAL-4-11000-c-2-2 110 1485 191 2,3 2,6 94 865
315S/M APAL-4-13200-c-2-2 132 1485 228 2,2 2,6 95 1010
315S/M APAL-4-16000-c-2-2 160 1480 278 2,4 2,7 96 1010
Ordering code Ratedoutput,
kW
Speed,r/min
At ratedoutput 1)
Current at400 V, ca A
Mst
M
Mmax
M
Efficiency, η %
Weight,kg
Motor sizeIEC
Code suffix for voltage (c)1 = 220–240 V delta/380–415 VY
2 = 380–415 V delta/660–690 VY
1) Correction factorsThe current values in the tables are applicable to motors wound for400 V. All motors can be used for voltages between 380 and 415 V.
Motors with voltage code c=1 can be connected in D to operate in therange of 220–240 V.Motors with voltage code c=2 can be connected in Y to operate in therange of 660–690 V.The correction factors on the current in the range of 400 V will thenbe: 220–240 V = 1.73 and 660–690 V = 0.58.
The motors can also be wound for 500 V, and the voltage code is thenc=5. The correction factor on the current at 400 V is then 0.8.
The speeds, efficiencies and power factors are applicable at 230,400, 690 and 500 V.
Temperature sensors in the stator winding, code suffix (d)0 = without1 = with bimetal temperature contacts2 = with thermistor
Motor versions, code suffix (e)2 = Fläkt Woods accepted
motor
Fläkt Woods 4897 GB 04.08 73 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Motor Data – Single-speed Motors, 50 Hz
6 poles = 1000 r/min
71 APAL-6-00018-c-0-2 0,18 905 0,74 2,1 2,2 57 9
71 APAL-6-00025-c-0-2 0,25 900 0,99 2,2 2,2 64 10
80 APAL-6-00037-c-0-2 0,37 930 1,23 2,5 2,5 65 11
80 APAL-6-00055-c-0-2 0,55 930 1,62 2,3 2,3 67 13
90S/L APAL-6-00075-c-0-2 0,75 920 1,97 2,1 2,1 72 16
90S/L APAL-6-00110-c-0-2 1,1 925 2,82 2,3 2,2 75 19
100L APAL-6-00150-c-0-2 1,5 940 3,78 2,2 2,5 78 26
112M APAL-6-00220-c-0-2 2,2 940 5,36 2,2 2,3 80 28
132M APAL-6-00300-c-0-2 3 960 6,82 2 2,2 82 44
132M APAL-6-00400-c-0-2 4 960 8,74 2,1 2,3 86 51
132M APAL-6-00550-c-0-2 5,5 960 12,2 2,2 2,4 86 62
160M APAL-6-00750-c-2-2 7,5 970 15,2 2,3 2,6 88 103
160L APAL-6-01100-c-2-2 11 970 21,9 2,4 2,9 88 129
180L APAL-6-01500-c-2-2 15 965 26,5 2,5 2,6 90 181
200L APAL-6-01850-c-2-2 18,5 975 35,4 2,3 2,5 90 219
200L APAL-6-02200-c-2-2 22 975 41,4 2,3 2,4 91 228
225S/M APAL-6-03000-c-2-2 30 985 54,2 2,6 2,7 92 366
250S/M APAL-6-03700-c-2-2 37 980 66,4 2,7 2,6 92 440
280S/M APAL-6-04500-c-2-2 45 985 84,5 2,4 2,6 93 610
280S/M APAL-6-05500-c-2-2 55 985 100 2,3 2,5 94 655
315S/M APAL-6-07500-c-2-2 75 985 136 2,3 2,5 94 775
315S/M APAL-6-09000-c-2-2 90 985 163 2,1 2,3 94 818
315S/M APAL-6-11000-c-2-2 110 985 200 2,3 2,4 95 990
Ordering code Ratedoutput,
kW
Speed,r/min
At ratedoutput 1)
Current at400 V, ca A
Mst
M
Mmax
M
Efficiency, η %
Weight,kg
Motor sizeIEC
Code suffix for voltage (c)1 = 220–240 V delta/380–415 VY
2 = 380–415 V delta/660–690 VY
1) Correction factorsThe current values in the tables are applicable to motors wound for400 V. All motors can be used for voltages between 380 and 415 V.
Motors with voltage code c=1 can be connected in D to operate in therange of 220–240 V.Motors with voltage code c=2 can be connected in Y to operate in therange of 660–690 V.The correction factors on the current in the range of 400 V will thenbe: 220–240 V = 1.73 and 660–690 V = 0.58.
The motors can also be wound for 500 V, and the voltage code is thenc=5. The correction factor on the current at 400 V is then 0.8.
The speeds, efficiencies and power factors are applicable at 230,400, 690 and 500 V.
Temperature sensors in the stator winding, code suffix (d)0 = without1 = with bimetal temperature contacts2 = with thermistor
Motor versions, code suffix (e)2 = Fläkt Woods accepted
motor
Fläkt Woods 4897 GB 04.08 74 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Motor Data – Single-speed Motors, 50 Hz
8 poles = 750 r/min
71 APAL-8-00012-c-0-2 0,12 685 0,66 1,9 2,1 47 9
80 APAL-8-00018-c-0-2 0,18 700 0,77 1,8 1,9 54 11
80 APAL-8-00025-c-0-2 0,25 700 0,92 1,8 1,8 62 12
90S/L APAL-8-00037-c-0-2 0,37 685 1,49 2,3 2,4 62 16
90S/L APAL-8-00055-c-0-2 0,55 690 2,17 2,2 2,1 62 18
100L APAL-8-00075-c-0-2 0,75 705 2,42 2 2,1 71 22
100L APAL-8-00110-c-0-2 1,1 700 3,39 1,5 2,1 72 26
112M APAL-8-00150-c-0-2 1,5 710 4,08 2,4 2,9 82 35
132M APAL-8-00220-c-0-2 2,2 715 5,27 2,4 2,7 82 59
132M APAL-8-00300-c-0-2 3 710 7,38 2,3 2,4 82 62
160M APAL-8-00400-c-2-2 4 730 10,2 2,3 3,1 86 105
160M APAL-8-00550-c-2-2 5,5 730 13,7 2,4 3,2 85 114
160L APAL-8-00750-c-2-2 7,5 725 17,6 2 2,5 86 127
180L APAL-8-01100-c-2-2 11 725 21,4 2,3 2,5 88 175
200L APAL-8-01500-c-2-2 15 725 32,9 2 2,1 89 217
225S/M APAL-8-01850-c-2-2 18,5 735 35,4 2,1 2,5 90 341
225S/M APAL-8-02200-c-2-2 22 730 42,4 2,2 2,2 91 365
250S/M APAL-8-03000-c-2-2 30 730 56,8 2,1 2,4 92 440
280S/M APAL-8-03700-c-2-2 37 735 70,6 2 2 92 607
280S/M APAL-8-04500-c-2-2 45 740 88,2 1,9 2 92 643
315S/M APAL-8-05500-c-2-2 55 735 104 1,9 2 93 745
315S/M APAL-8-07500-c-2-2 75 740 141 1,6 2 94 876
315S/M APAL-8-09000-c-2-2 90 740 166 2,1 2,2 94 970
Ordering code Ratedoutput,
kW
Speed,r/min
At ratedoutput 1)
Current at400 V, ca A
Mst
M
Mmax
M
Efficiency, η %
Weight,kg
Motor sizeIEC
Code suffix for voltage (c)1 = 220–240 V delta/380–415 VY
2 = 380–415 V delta/660–690 VY
1) Correction factorsThe current values in the tables are applicable to motors wound for400 V. All motors can be used for voltages between 380 and 415 V.
Motors with voltage code c=1 can be connected in D to operate in therange of 220–240 V.Motors with voltage code c=2 can be connected in Y to operate in therange of 660–690 V.The correction factors on the current in the range of 400 V will thenbe: 220–240 V = 1.73 and 660–690 V = 0.58.
The motors can also be wound for 500 V, and the voltage code is thenc=5. The correction factor on the current at 400 V is then 0.8.
The speeds, efficiencies and power factors are applicable at 230,400, 690 and 500 V.
Temperature sensors in the stator winding, code suffix (d)0 = without1 = with bimetal temperature contacts2 = with thermistor
Motor versions, code suffix (e)2 = Fläkt Woods accepted
motor
Fläkt Woods 4897 GB 04.08 75 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Motor Data – Two-speed Motors, 50 Hz
2/4 poles = 3000/1500 r/min – One stator winding (Dahlander)
71 M2VA 71 B 00055-c-d-0 2 0,55 2700 1,3 3,8 1,4 1,5 67 0,91 6,54 0,12 1470 0,75 3,4 2,2 2,3 55 0,42
80 M2VA 80 A 00075-c-d-0 2 0,75 2850 1,8 4,9 2,2 2,3 73 0,83 94 0,15 1430 0,65 3,9 2,4 2,5 52 0,65
80 M2VA 80 B 00110-c-d-0 2 1,1 2840 2,6 4,9 2,2 2,3 73 0,84 114 0,25 1430 0,9 3,9 2,2 2,3 60 0,67
90 S M2AA 90 S 00150-c-d-0 2 1,5 2860 3,3 5,2 1,8 2,4 77 0,87 134 0,33 1460 1,1 3,9 1,1 2,1 66 0,67
90 L M2AA 90 L 00220-c-d-0 2 2,2 2860 4,6 5,9 2,1 2,6 80 0,88 164 0,45 1460 1,4 4,4 1,2 2,3 73 0,65
100 L M2AA 100 LB 00350-c-d-0 2 3,5 2880 7 6,2 2,1 2,6 80 0,91 254 0,7 1470 2 4,8 1,2 3 77 0,65
112 M M2AA 112 M 00451-c-d-0 2 4,5 2875 8,4 7 1,8 2,3 83 0,93 324 1 1450 2,4 6 1,9 2,8 80 0,76
132 S M2AA 132 S 00620-c-d-0 2 6,2 2880 11,8 7 2 2,6 84 0,91 424 1,3 1455 3,5 6,5 2,6 3,3 80 0,67
132 M M2AA 132 M 00830-c-d-0 2 8,3 2875 15,4 7,4 2,5 2,7 84 0,93 564 1,7 1455 4,2 6,6 2,7 3,3 82 0,71
160 M M2AA 160MA 01000-c-d-0 2 10 2910 19 5,9 1,5 2,3 85 0,89 734 2 1465 4,8 6,1 2,4 2,8 83,5 0,73
160 M M2AA 160 M 01600-c-d-0 2 16 2915 28,5 6,6 1,8 2,4 87,5 0,92 944 3,2 1465 7 6,3 2,5 2,8 86,5 0,76
160 L M2AA 160 L 01950-c-d-0 2 19,5 2930 36 7,6 2,3 2,9 89 0,89 1004 4,5 1465 9,7 6,4 2,5 2,8 88 0,77
180 M M2AA 180 M 02150-c-d-0 2 21,5 2935 38 7 2,1 2,6 90 0,91 1374 4,7 1465 10 5,3 2,1 2,3 88 0,77
180 L M2AA 180 L 02600-c-d-0 2 26 2940 47 6,9 2,3 2,6 90,5 0,89 1514 5,2 1470 11 5,8 2,4 2,4 89,5 0,75
200 ML M2AA 200 MLA 03200-c-d-0 2 32 2940 58 7,1 2 2,5 90 0,89 1804 8 1465 16 6,2 2 2,2 89 0,85
200 ML M2AA 200 MLB 03900-c-d-0 2 39 2950 69 7,4 2 2,6 91,5 0,89 2054 10 1475 19 6,2 2 2,3 91 0,85
200 ML M2AA 200 MLC 04200-c-d-0 2 42 2950 75 7,7 2,2 3 92,5 0,89 2054 11 1470 23 5,6 2,1 2,5 91 0,77
225 SM M2AA 225 SMB 04500-c-d-0 2 45 2955 76 7,4 2 2,6 93 0,92 2354 13 1475 25 5,3 2 2,1 91,5 0,82
225 SM M2AA 225 SMC 05500-c-d-0 2 55 2955 94 7,3 2 2,6 93,5 0,91 2604 15 1475 29 5,4 2 2,2 92,5 0,82
250 SM M2AA 250 SMB 07500-c-d-0 2 75 2955 125 8,9 2,3 3,1 94,5 0,92 3304 25 1475 48 5,5 2 2,2 93 0,82
IECABB
Motors
Orderingcode
ARAL-2-
Ratedoutput,
kW
Speed,r/min
At ratedoutput 1)
Current at400 V, ca A
I st 1)
I
Mst
M
Mmax
M
Efficiency, η %
Powerfactors,cos ϕ
Weight,kg
Motor sizeNo. ofmotorpoles
Code suffix for voltage (c)
2 = 380–400 V (sizes 112–132)400 V (sizes 160–315)
4 = 400–415 V (sizes 71–100)415 V (sizes 160–315)
1)lst = Ratio of motor starting current to full-load current
Temperature sensors in the stator winding, code suffix (d)0 = without
1 = with bimetal temperature contacts
2 = with thermistorl
Fläkt Woods 4897 GB 04.08 76 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Motor Data – Two-speed Motors, 50 Hz
4/6 poles = 1500/1000 r/min – Two separate windings
71 M2VA 71 B 00030-c-d-0 4 0,3 1350 0,9 2,8 1 1,1 54 0,86 6,56 0,1 900 0,6 2 1,05 1,15 30 0,79
80 M2VA 80 A 00045-c-d-0 4 0,45 1390 1,2 3,2 1,6 1,7 65 0,85 106 0,15 945 0,7 3 1,5 1,6 42 0,75
80 M2VA 80 B 00075-c-d-0 4 0,75 1400 1,9 3,3 1,7 1,8 67 0,86 10,56 0,22 955 0,9 3,2 1,6 1,7 48 0,74
90 S M2AA 90 S 00100-c-d-0 4 1 1400 2,5 4,3 1,8 2,2 73 0,83 136 0,3 940 1,2 2,6 1 1,7 53 0,7
90 L M2AA 90 L 00150-c-d-0 4 1,5 1400 3,5 4,3 1,7 2,1 72 0,84 166 0,45 930 1,6 2,9 1 1,8 52 0,73
100 L M2AA 100 LA 00200-c-d-0 4 2 1430 4,5 5 1,8 2,4 77 0,85 206 0,6 960 2 3,3 1 1,9 62 0,72
100 L M2AA 100 LB 00250-c-d-0 4 2,5 1430 5,5 5,6 2 2,5 79 0,84 236 0,8 960 2,5 3,5 1,1 2 68 0,71
112 M M2AA 112 M 00300-c-d-0 4 3 1445 6,3 6 1,3 2,3 82 0,84 336 1 975 3,1 4 1 2,2 67 0,68
132 S M2AA 132 S 00450-c-d-0 4 4,5 1460 9,2 6,5 1,5 2,3 83 0,85 486 1,5 985 5,1 4,2 1 2,2 67 0,64
132 M M2AA 132 M 00600-c-d-0 4 6 1460 12 7,1 1,8 2,5 84 0,86 596 2 980 5,6 4,5 1,3 2 71 0,73
160 M M2AA 160 M 01050-c-d-0 4 10,5 1460 21 6,4 2 2,5 87 0,84 946 3,5 965 8,6 4,1 1,3 1,7 75,5 0,78
160 L M2AA 160 L 01450-c-d-0 4 14,5 1460 28 6,9 2,2 2,6 88,5 0,85 1176 4,5 970 11 4,6 1,5 1,9 77 0,76
180 M M2AA 180 M 01601-c-d-0 4 16 1470 31 6,3 1,9 2,5 89 0,83 1376 5 980 12,5 4,6 1,5 2 78 0,73
180 L M2AA 180 L 02001-c-d-0 4 20 1470 39 7,2 2,4 2,7 90 0,83 1616 6,5 980 16 5 1,8 2 79,5 0,74
200 ML M2AA 200 MLA 02300-c-d-0 4 23 1475 43 7,7 1,6 2,8 89,5 0,88 1756 7,2 985 15 7,8 1,9 2,9 84 0,87
200 ML M2AA 200 MLB 03000-c-d-0 4 30 1470 54 7,7 1,6 2,7 90 0,90 2006 9 985 18 7,9 1,7 2,5 83,5 0,89
225 SM M2AA 225 SMB 03400-c-d-0 4 34 1470 60 7,7 1,5 2,7 91 0,91 2256 11 985 21 6,7 1,3 2,3 85 0,89
225 SM M2AA 225 SMC 04200-c-d-0 4 42 1475 75 8,4 1,7 3 91,5 0,89 2556 14 985 27 6,8 1,4 2,3 89 0,89
250 SM M2AA 250 SMB 06300-c-d-0 4 63 1475 110 7,5 2,4 2,7 93,5 0,89 3356 18,5 985 40 7,3 3 2,6 87 0,79
280 SM M2CA 280 SMA 07700-c-d-0 4 77 1486 144 7,6 2,4 2,9 93,9 0,83 4906 25 991 54 7,7 3,2 2,7 89,3 0,76
280 M M2CA 280 MB 09000-c-d-0 4 90 1485 161 7,4 2,3 2,7 94,2 0,86 5506 28 991 58 7,7 3,2 2,8 89,8 0,78
315 SM M2CA 315 SMA 11000-c-d-0 4 110 1489 199 6,6 1,9 2,6 95,2 0,85 7306 32 992 67 6,5 2,8 2,9 91,2 0,78
315 M M2CA 315 MB 12500-c-d-0 4 125 1488 219 6,6 1,9 2,4 95,5 0,86 8506 37 992 75 6,4 2,9 2,8 92,2 0,79
315 L M2CA 315 LA 15000-c-d-0 4 150 1488 260 6,6 1,9 2,4 95,7 0,87 9706 44 991 88 6,4 3 2,7 92,6 0,79
IECABB
Motors
Orderingcode
ATAL-4-
Ratedoutput,
kW
Speed,r/min
At ratedoutput 1)
Current at400 V, ca A
I st 1)
I
Mst
M
Mmax
M
Efficiency, η %
Powerfactors,cos ϕ
Weight,kg
Motor size No. ofmotorpoles
Code suffix for voltage (c)
2 = 380–400 V (storlekar 112–132)400 V (storlekar 160–250)
4 = 400–415 V (storlekar 71–100)415 V (storlekar 160–250)
1)lst = Ratio of motor starting current to full-load current
Temperature sensors in the statorwinding, code suffix (d)0 = without
1 = with bimetal temperature contacts
2 = with thermistor
l
Fläkt Woods 4897 GB 04.08 77 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Motor Data – Two-speed Motors, 50 Hz
4/8 poles = 1500/750 r/min – One stator winding (Dahlander)
71 M2VA 71 B 00037-c-d-0 4 0,37 1360 1,1 3,1 1,3 1,4 58 0,84 6,58 0,09 700 0,48 1,7 1,8 1,9 19 0,52
80 M2VA 80 A 00055-c-d-0 4 0,55 1410 1,7 3,6 1,9 2 62 0,74 98 0,11 690 0,6 2,4 1,6 1,7 40 0,65
80 M2VA 80 B 00075-c-d-0 4 0,75 1410 2,1 3,7 2 2,1 69 0,76 10,58 0,2 690 1 2,4 1,6 1,7 46 0,64
90 S M2AA 90 S 00110-c-d-0 4 1,1 1410 2,8 4,2 1, 8 2,3 73 0,80 138 0,26 700 1,2 2,4 1,2 1,9 53 0,63
90 L M2AA 90 L 00170-c-d-0 4 1,7 1390 4,0 4,5 2,2 2,6 74 0,82 168 0,35 700 1,6 2,5 1,5 2,1 57 0,57
100 L M2AA 100 LA 00230-c-d-0 4 2,3 1415 5,2 4,6 1,8 2,4 76 0,84 208 0,5 715 1,9 2,7 1,2 1,9 63 0,6
100 L M2AA 100 LB 00280-c-d-0 4 2,8 1430 6,4 5,2 2 2,6 81 0,82 238 0,6 720 2,2 3 1,2 2,2 68 0,58
112 M M2AA 112 M 00350-c-d-0 4 3,5 1430 7 6,8 1,6 2,5 81 0,89 328 0,7 720 2,5 4,4 1,7 2,7 71 0,58
132 S M2AA 132 S 00500-c-d-0 4 5 1450 9,9 6,4 1,5 2,3 83 0,87 488 1 725 3,3 3,6 1 2 74 0,59
132 M M2AA 132 M 00680-c-d-0 4 6,8 1460 13,7 7,6 2 2,8 85 0,84 598 1,4 730 5,1 3,6 1,4 2,7 73 0,55
160 M M2AA 160 M 01050-c-d-0 4 10,5 1460 21 6,9 2,2 2,7 87,5 0,84 948 2,2 735 7,4 3,7 1,5 2,3 79 0,54
160 L M2AA 160 L 01550-c-d-0 4 15,5 1460 30 6,9 2,2 2,6 88,5 0,85 1178 2,7 735 9,5 3,9 1,7 2,6 79,5 0,51
180 M M2AA 180 M 01700-c-d-0 4 17 1470 33 5,8 1,7 2,3 88,5 0,85 1378 3,4 730 11 4,3 1,2 1,9 78 0,56
180 L M2AA 180 L 02200-c-d-0 4 22 1475 43 6,7 2 2,6 89,5 0,83 1618 4,4 735 15 3,9 1,7 2,3 79 0,53
200 ML M2AA 200 MLA 02900-c-d-0 4 29 1470 54 6,9 2,2 2,4 90,5 0,86 1808 6,5 730 17 4,2 1,9 1,9 86 0,64
200 ML M2AA 200 MLB 03300-c-d-0 4 33 1475 61 7,8 2,6 2,6 91,5 0,86 2058 8 730 21 4,2 1,9 1,8 86,5 0,64
225 SM M2AA 225 SMB 04200-c-d-0 4 42 1480 85 7,8 2,5 3 92 0,78 2658 10 740 27 5 2,2 2,3 89,5 0,61
225 SM M2AA 225 SMC 05000-c-d-0 4 50 1465 91 7,3 2,3 2,5 92,5 0,87 2658 11 735 28 4,7 2 2 89,5 0,65
250 SM M2AA 250 SMB 06000-c-d-0 4 60 1475 104 7,9 2,6 2,7 93 0,86 3358 15 735 34 4,7 2,1 2 90 0,70
280 S M2CA 280 SA 06500-c-d-0 4 65 1484 121 7,5 2,7 2,9 93,2 0,84 4458 15 743 38 5,3 2,8 2,3 90 0,63
280 SM M2CA 280 SMA 08000-c-d-0 4 80 1486 150 8,5 3,3 3,4 93,8 0,83 4908 20 743 50 5,4 2,9 2,6 91,5 0,63
280 M M2CA 280 MB 09000-c-d-0 4 90 1486 164 8,8 3,6 3,5 94,1 0,85 5508 23 742 56 5,4 2,8 2,6 91,8 0,64
315 SM M2CA 315 SMA 11000-c-d-0 4 110 1487 197 6,8 1,9 2,6 94,6 0,85 7308 22 744 56 4,9 2,1 2,5 92,5 0,62
315 M M2CA 315 MB 13200-c-d-0 4 132 1486 235 6,8 2 2,6 94,9 0,86 8508 26 746 65 4,8 2 2,4 93 0,64
315 L M2CA 315 LA 16000-c-d-0 4 160 1486 283 7 2,1 2,7 95,2 0,86 9708 32 743 80 4,8 2,1 2,5 93,4 0,64
IECABB
Motors
Orderingcode
ARAL-4-
Ratedoutput,
kW
Speed,r/min
At ratedoutput 1)
Current at400 V, ca A
I st 1)
I
Mst
M
Mmax
M
Efficiency, η %
Powerfactors,cos ϕ
Weight,kg
Motor size No. ofmotorpoles
Code suffix for voltage (c)
2 = 380–400 V (sizes 112–132)400 V (sizes 160–250)
4 = 400–415 V (sizes 71–100)415 V (sizes 160–250)
1)lst = Ratio of motor starting current to full-load current
Temperature sensors in the stator winding, code suffix (d)0 = without
1 = with bimetal temperature contacts
2 = with thermistor
l
Fläkt Woods 4897 GB 04.08 78 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
Flexible connectionGTLZ-21-5-ccc-1-0 Flexible connection, outlet,
two flanges
Inspection coverGTLZ-32-5-ccc-d-0 Inspections coverMounted on the back plate of the fan. Made of galvanisedsheet steel.d = location on fan casing, 0 – 4, see illustration
Accessories
Z x XL
A o
ut
A inA1
T
A2
Size A in A1 A2 A out Z X L T ø D
022 288 318 328 348 2 159 118 30 9
025 322 352 362 382 2 176 118 30 9
031 404 434 444 464 2 217 118 30 9
035 453 483 493 513 2 242 118 30 9
040 507 537 547 567 4 134 118 30 9
045 569 599 609 629 4 150 147 30 9
050 638 668 677 698 4 167 149 30 9
056 715 745 754 775 4 186 149 30 9
063 801 831 840 861 4 208 149 30 9
071 898 928 937 958 5 232 149 30 9
0
1
2
3
4
DrainGTLZ-34-5-ccc-d-0 DrainMounted on the back plate of the fan. Made of galvanisedsheet steel.d = location on fan casing, 0 – 4, see illustration
0
1
2
3
4
1520
20 15
ø D
Protective screenGTLZ-23-5-ccc-1-0 Protective, outlet
CounterflangeGTLZ-24-5-ccc-1-0 Counterflage, outlet
Fläkt Woods 4897 GB 04.08 79 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
PaintingGTLZ-60-5-ccc-d-0 Painted finish, inner and outer
surfaces
d = 1 Epoxy powder painting 60 µm, color: AM 8043,dark grey.
d = 2 Epoxy powder painting 100 µm, color: AM 8043,dark grey.
d = 3 Wet-painted finish in three layers 250 µm, color:AM 8043, dark grey.
d =1 Epoxy-powder painting, 60 µm.
The fan casing, impeller and bearing bracket as well asaccessories are coated with 60 µm thick epoxy powderand baked. The colour is AM 8043, dark grey. All boltsand nuts are made of stainless steel.Painting process:– Alkali degreasing– Iron phosphate pre-treatment– Flushing with +40 °C water– Drying at 150 °C– Powder painting, 60 µm coat in one layer– Drying at 215 °C
Epoxy powder is well suited for coating objects that aresubject to mechanical and chemical stress. It is an excel-lent rust-inhibitor and can withstand acids, alkalinesolutions, greases and solvents.
d =2 Epoxy-powder painting, 100 µm.
The fan casing, impeller and bearing bracket as well asaccessories are coated with 100 µm thick epoxy powderand baked. The colour is AM 8043, dark grey. All boltsand nuts are made of stainless steel. The coating processand epoxy powder are the same as in version d = 1; thecoat is 100 µm thick in one layer.
d = 3 Wet painting 250 µm, finish in three coats.
The fan casing and bearing bracket as well as accessoriesare painted with 250 µm thick epoxy in 3 layers. Thecolor is AM 8043, dark grey. The impeller is coated with100 µm thick epoxy powder. All bolts and nuts are madeof stainless steel.
Air flow measurementDouble inlet GT-fans can be equipped with an airflowsensor for the measurement of airflows. The measure-ment method is based on differential pressure betweenpressure on inlet cone on specified place and the refer-ence pressure upstream of the inlet cone. The pressuredifference is calibrated for each fan size.
where Qv = air flow (m3/s)∆pm = differential pressure readingk = k-factor for specific fan
The corresponding air flow related to the differential pres-sure can easily be read by means of manometer(not included into the delivery).The accuracy of the air flow sensor is depending on the airflow conditions inside the air handling unit. Theaccuracy of +- 5 % can be achieved by calibration under thefinal operating conditions. Without calibrationthe accuracy is +- 7-10 %.The k-factors are valid for air density 1.2 kg/m3.
GTLZ-80-5-ccc-1-1 Air flow measurement device forGTLF
GTLZ-81-5-ccc-1-1 Air flow measurement device forGTLB
GTLZ-82-5-ccc-1-1 Air flow measurement device forGTHB
For sizes 112 – 140 can be supplied with GTLZ-52 typeair flow measurement device. The measurementmethod is based on the differential pressure in thedevice.
GTLZ-52-5-ccc-1-0 Air flow measurement device forGTHB, size 112 – 140.
Accessories
Fläkt Woods 4897 GB 04.08 80 Specifications are subject to alteration without notice
Centrimaster GT-5 CATALOGUE
CENTRIMASTER GT-5Centrifugal fan GTLB-a-bbb-c-dd-ee
GTHB-a-bbb-c-dd-eeGTLF-a-bbb-c-dd-ee
LB = centrifugal fan with backward-curved blades (sizes 022 – 100)
HB = centrifugal fan with backward-curved blades in reinforced version(sizes 080 – 140, sizes 035-071 available to special order)
LF = centrifugal fans with forward-curved blades (sizes 022 – 071)
Fan type (a)5 = double inlet fan for belt drive
Size (bbb)022, 025, 028, 031, 035, 040, 045, 050, 056, 063, 071, 080, 090, 100, 112, 125, 140
Version (c)1 = normal version
Handing and discharge direction (dd)First d: 1 = right-hand
2 = left-handSecond d: 1 = 0º
3 = 90º5 = 180º7 = 270º
Motor placement and generatio (ee)First e: 0 = motor behind fanSecond e: 0 = first generation
Belt drive GTLB / GTHB GTRB-5-bbb-1-ddddBelt drive GTLF GTRF-5-bbb-1-dddd
Fan size (bbb)
Fan speed, r/min (dddd)(If a two-speed motor is used, specify the higher speed.)
Motor APAL-a-bbbbb-c-d-2ARAL-a-bbbbb-c-dATAL-a-bbbbb-c-d
See tabels on pages 71 - 77Select the number of motor poles as follows:Fan speed < 750 r/min = 6-pole motorFan speed 751-2344 r/min = 4-pole motorFan speed > 2345 r/min = 2-pole motor
Accessories GTLZ-aa-b-ccc-d-e(aa) Type of accessory(b) 5 = Accessory for the GT..-5(ccc) Fan size(d) 1 = to be supplied with fan (specify d = 0 if you
are placing an order for individual accessoriesonly). See the ordering code as well.
(e) Generation digit.
Flexible connection, discharge GTLZ-21-5-ccc-1-0
Fan size (ccc)
Protective screen, discharge GTLZ-23-5-ccc-1-0
Fan size (ccc)
Counter flange, discharge GTLZ-24-5-ccc-1-0
Fan size (ccc)
Inspection cover GTLZ-32-5-ccc-d-0
Fan size (ccc)
Location (d)
Drain GTLZ-34-5-ccc-d-0
Fan size (ccc)
Location (d)
Anti-vibration mountings GTLZ-42-5-ccc-d-0
Fan size (ccc)
Mounting set (d)
Painted finish, inner GTLZ-60-5-ccc-d-0and outer surfaces
Fan size (ccc)
Version (d)1 = 60 µm2 = 100 µm3 = 250 µm
Air flow measurement device GTLZ-80-5-ccc-1-1for GTLF-5
Fan size (ccc)
Air flow measurement device GTLZ-81-5-ccc-1-1 for GTLB-5
Fan size (ccc)
Air flow measurement device GTLZ-82-5-ccc-1-1 for GTHB-5
Fan size (ccc)
Air flow measurement device GTLZ-52-5-ccc-1-0 for GTHB-5, size 112–140
Fan size (ccc)
Protective screen for fan inlet is included in the fan code
Product Code
Fläkt Woods Oy, Kalevantie 39, FI-205 20 Turku, Finland
t 358-20-442 300 f 358-20-442 3016w www.flaktwoods.com
FIFL
O 4
897 G
B 0
4.0
8C
ON
DE
SIG
N T
ELE
SK
OP
+4
6 3
6 3
0 8
3 8
0