End Suction Centrifugal Pumps with“Back Put-Out” facility, dimensions and nominal ratings to PN 10 and PN16 built according to DIN 24255 standard. DN 25-250 Q 1100m³/hr

O.P. up to 10bar (std) H 150m

16bar (optional) n up to 3600rpm

t - 10ºC - 105ºC, 140ºC (optional)

Flange DIN 2332 (Std) ANSI B16.5B (optional) Materials: Cast Iron, Ductile Iron, Bronze,

Stainless Steel

Mounting: - Bare Shaft- Direct Coupled with electric

motor or Engine- Monobloc (EUM Series)

- Extended Shaft or Stub Shaft

Self-Priming, Semi-Open Impeller Centrifugal Pumps are for solids handling and abrasive resistance. Suitable for sewage and waste treatment, fire fighting, bilge, ballasting and effluent transfer. DN 40 - 300 Q 1,250m³/hr

O.P. up to 10bar H 65m

t - 10ºC - 65ºC n up to 3600rpm

Flange DIN 2332 (Std) ANSI B16.5B (optional) Materials: Cast Iron, Ductile Iron, Bronze,

Carbon Steel, Stainless Steel, Hastelloy

Mounting: - Bare Shaft- Engine Driven- Closed Coupled (EJM)

Vertical In-line Closed Coupled Circulation Centrifugal Pumps with "Back Put-Out" facility, suitable for HVAC, booster pump, hot and cold circulation.

DN 25 - 125 Q up to 450m³/hr

O.P. up to 10bar H 100m

t - 10ºC - 100ºC n up to 3600rpm

Flange DIN 2332 (Std) ANSI B16.5B (optional) Materials: Cast Iron, Ductile Iron, Bronze,

Stainless Steel

Mounting: - Closed Coupled with IEC B5 (std), NEMA 'D' flange (optional)

- Extended and Stub Shaft

Axial Split, Single Stage, Double Suction Centrifugal Pumps are suitable for municipal water supply, power plant, HVAC, cooling tower, Marine and ship building.

DN 50 - 1000 Q 18,000m³/hr

O.P. up to 25bar H 180m

t - up to 105ºC n up to 3600rpm

Flange DIN 2332 RF Std, ANSI B16.5B optional

Materials: Cast Iron, Ductile Iron, Bronze, Stainless Steel

Mounting: - Bare Shaft- Engine Driven

High Pressure Horizontal/Vertical Multistage Centrifugal Pump are suitable for water supply, fire fighting, boiler feed, RO, sprinkler installation. It Includes oil for up to 150cSt viscosity. It can be fitted with axial inlet to combat low NPSHa. DN 32- 200mm Q 500m³/hr

O.P. up to 40 bar, H up to 400 m

t - 20ºC to 140ºC n up to 3600rpm

Flange DIN 2498, ANSI B16.5B optional Materials: GG25(Cast Iron), G-CuSn10(Bronze),

Stainless Steel Mounting: - Bare shaft

- Engine Driven- Closed Coupled (EMSM)

TM

Euroflo Pumps International Pte Ltd36 Joo Koon Road Singapore 628988Tel: +65 6861 3836 Fax: +65 6861 3936

50 bar (optional)