Central Management Solution...Feb 18, 2019 · Hardware-based H.265 decoding 50% increase of video...
Transcript of Central Management Solution...Feb 18, 2019 · Hardware-based H.265 decoding 50% increase of video...
Central Management Solutionincl. E4200 Control Workstation & D4200 Video Wall DecoderQuick Start Guide
Tel: +886-2-2516-6001 Fax: +886-2-2516-6201
Email: [email protected]; [email protected] www.gvdigital.com
E4200 Control Workstation & D4200 Video Wall Decoder - Quick Start Guide i
ContentsContents ...............................................................................iPreface ................................................................................ ii
About this Document ................................................................ ii
Declaration of Conformity ........................................................ ii
FCC ............................................................................................. ii
CE ................................................................................................ ii
Copyright and Trademarks ...................................................... iii
Revision history .................................................................. ivIntroduction ..........................................................................1Accessories .........................................................................2I/O ports ...............................................................................3
E4200 Control Workstation .................................................... 3
D4200 Video Wall Decoder ..................................................... 4
Install hardware & power on ................................................5E4200 Control Workstation ..................................................... 5
D4200 Video Wall Decoder ..................................................... 6
Prepare O.S. ........................................................................7Set up Windows® .................................................................... 7
Manage screen resolutions ..................................................... 8
Manage network parameters .................................................. 9
Sync date, time, and time zone with directory server ........... 10
Install software ...................................................................12E4200 Control Workstation ................................................... 12
Pure Management Console ....................................13
Combo.....................................................................17
D4200 Video Wall Decoder ................................................... 20
Appendix I: Set up a PC-based Single Directory Server ...21
Appendix II: Manage password policy for Windows® 2012/ 2016...................................................................................26
E4200 Control Workstation & D4200 Video Wall Decoder - Quick Start Guideii
PrefaceAbout this Document
This document is meant for the experienced users and integrators with hardware knowledge of personal computers. If you are not sure about the description herein, consult your vendor before further handling. We recommend that you keep one copy of this document for the quick reference for any necessary maintenance in the future. Thank you for choosing GVD products.
Declaration of Conformity
FCC
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.CE
The product(s) described in this manual complies with all applicable European Union (CE) directives. For computers systems to remain CE compliant, only CE-compliant parts may be used. Maintaining CE compliance also requires proper cable and cabling techniques.
E4200 Control Workstation & D4200 Video Wall Decoder - Quick Start Guide iii
Preface
Copyright and Trademarks
This document contains proprietary information protected by copyright. All rights are reserved. No part of this document may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer. Company/product names mentioned herein are used for identification purposes only and are trademarks and/or registered trademarks of their respective companies.
E4200 Control Workstation & D4200 Video Wall Decoder - Quick Start Guideiv
Revision history
Release time Description
February 2019 The initial release.
E4200 Control Workstation & D4200 Video Wall Decoder - Quick Start Guide 1
Introduction
� Max. 10,000 channels � 4K and 3-monitor display on E4200. � 4K and 4-monitor display on D4200. � Max. 1,000 synchronous live videos on a huge video wall � Hardware-based H.265 decoding � 50% increase of video display decoding by GPU � Turnkey management console with "directory server" built in
To follow the rapid change of video technology, GVD brought an upgrade to the Central Management Solution with a new management console named E4200 Control Workstation and a new Video Wall Decoder D4200.
The E4200 Control Workstation brings 3-monitor display to refine the remote management and the friendly man-machine interface of the Central Management Platform. The turnkey E4200 is built in with a "Directory Server" to provide a lighter and price-competitive solution of a command center and comes with an heightened GPU to bring a 50% boost of decoding compared to the previous-generation
products. Such a GPU also extends the display to triple monitors, with 4K (4096 x 2160) resolution on one of them. Hardware-based H.265 decoding also becomes available to meet the challenge of significant-area video surveillance such as city surveillance and homeland security.
The new Video Wall Decoder D4200 is yet another highlight of the upgrade. It has the GPU eqaully enhanced as the E4200 to feature an exclusive quad-monitor display, with 4K resolution on two of them. The decoding ability is equally raised by 50%. H.265 is also availiable. A huge video wall of max. 40 screens to show 1,000 synchronous live videos isn't difficult at all.
E4200 Control Workstation & D4200 Video Wall Decoder - Quick Start Guide2
Accessories
The "Installer" CD
Installer
CD
Quick Start Guide
QuickStartGuide
E4200 Control Workstation & D4200 Video Wall Decoder - Quick Start Guide 3
I/O ports
E4200 Control Workstation
Front-left view
USB 3.0 ports
Mic-inLine-out
Power status LEDReset signal LED
Power buttonReset button
Rear view
Power jack
HDMI port
DisplayPortLAN ports
USB 3.0 portsVGA port
Serial COM port
E4200 Control Workstation & D4200 Video Wall Decoder - Quick Start Guide4
I/O ports
D4200 Video Wall Decoder
Front-left view
USB 3.0 ports
Mic-inLine-out
Power status LEDReset signal LED
Power buttonReset button
Rear view
Power jackDVI port
HDMI ports
DisplayPortHDMI port
DisplayPortLAN ports
USB 3.0 portsVGA port
Serial COM port
E4200 Control Workstation & D4200 Video Wall Decoder - Quick Start Guide 5
Install hardware & power on E4200
1. Connect the E4200 Control Workstation to a power source.
2. Connect monitors. A total of 3 monitors does the E4200 Control Workstation support.
3. Connect a pair of keyboard and mouse to the E4200 Control Workstation
4. Connect the E4200 Control Workstation to your local area network.
5. From the front panel, hit the power button.
3
2 1
4
5
E4200 Control Workstation & D4200 Video Wall Decoder - Quick Start Guide6
Install hardware & power on D4200
1. Connect the D4200 Video Wall Decoder to a power source.
2. Connect monitors. Up to 4 monitors does the D4200 Video Wall Decoder
support.When you are using quadruple displays, connect two monitors to the display outputs on the graphics card and the other two to those on the motherboard to get the best display performance. The display outputs on the motherboard DO NOT work before Windows® starts.
3. Connect a pair of keyboard and mouse to the D4200 Video Wall
Decoder.
4. Connect the D4200 Video Wall Decoder to your local area network.
5. From the front panel, hit the power button.
3
1
5
4
Graphics-card display outputs
Motherboard display outputs, which DO NOT work before Windows® startup.
2 Connect two monitors to graphics-card display outputs and the other two to
motherboard display outputs to get the best display performance when
you are using quadruple displays.
E4200 Control Workstation & D4200 Video Wall Decoder - Quick Start Guide 7
Set up Windows®
When the E4200 or D4200 starts up for the first time, a Set Up Windows wizard opens onscreen. Follow the guide below to go through the setup.
1. Select the display language for the operating system. Then click the Next button to proceed.
2. Set the regional settings to meet your locale. Then click the Next button to proceed.
3. Set the date, time, and time zone to meet your locale.
Then click the Next button to proceed.
4. It takes a while for the wizard to finalize the settings. Once the finalization is through, the system auto-restarts to apply the change.
5. Proceed to manage screen resolutions as described on page 8.
1 2 3
4
E4200 Control Workstation & D4200 Video Wall Decoder - Quick Start Guide8
Manage screen resolutions
1. Click Windows® Start button | Control Panel | Display | Adjust resolution.
2. Change the Screen resolution to 1920 x 1080 (Full HD) or 4096 x 2160 (4K via HDMI).
2
3
The E4200 Control Workstation supports either 3 x Full HD displays or 2 x Full HD plus 1 x 4K displays.
The D4200 Control Workstation supports up to 4 displays, either 2 x Full HD plus 2 x 4K (HDMI) or 4 x Full HD.
3. Hit the OK button to save the change.4. Repeat the above procedure to the other monitors.5. Proceed to manage network parameters as described on page 9.
E4200 Control Workstation & D4200 Video Wall Decoder - Quick Start Guide 9
Manage network parameters
Make sure you have set up a directory server in the platform. See the installation manual of GVD Central Management Platform for details.Before you manage the network parameters, get the network environment ready. If the network is not available, contact your network administrator for further help.
1. Click Windows® Start button | Control Panel | Network and Sharing Center | Change adapter settings.
2. Right-click over the active connection and click Properties from the context menu that opens.
3. Click Internet Protocol Version 4 (TCP/IPv4). Then click the Properties button.
4. On the General tabbed page, configure the IP address and the subnet mask. Then hit the OK button.
5. Proceed to sync system date, time, and time zone with the directory server as described on page 10.
E4200 Control Workstation & D4200 Video Wall Decoder - Quick Start Guide10
Sync date, time, and time zone with directory server
1. Click Windows® Start button | Control Panel | Date & Time.A Date and Time property sheet then opens.
2. Click the Change time zone... button.A Time Zone Settings window then opens.
2
3
3. Set the time zone to your locale. Then click the OK button to close the setting.
4. Click the Change date and time... button.A Date and Time Settings window then opens.
4
56
E4200 Control Workstation & D4200 Video Wall Decoder - Quick Start Guide 11
Sync date, time, and time zone with directory server
5. Sync the system time with the directory server installed in your network already. Then click the OK button.
6. Hit the OK button again to quit the setting.
7. Proceed to install software as described on page 12.
E4200 Control Workstation & D4200 Video Wall Decoder - Quick Start Guide12
Install software: E4200
The management console of GVD Central Management Platform needs an E4200 Control Workstation as the hardware and the VMS Manager as the software.
As long as you have set up a directory server in the platform, set up the hardware of E4200 Control Workstation as described in Install hardware and power on E4200 on page 6, and have done Prepare O.S. from page 7, you can proceed to install the software for the management console.
In the configuration of the platform, there are two types of functions for the E4200 Control Workstation to take, either purely as a management console or a "Combo", which means the management console doubles as a directory server.
Purely Management ConsoleCombo (management console and
directory server in one)
See Pure Management Console on page 13 to install the software
See Combo on page 17 to install the software
E4200 Control Workstation & D4200 Video Wall Decoder - Quick Start Guide 13
Install software: E4200: Pure Management Console
This section will guide you to install the software for the E4200 Control Workstation to work purely as a managment console for GVD Central Management Platform.
A copy of the VMS Manager is preinstalled when an E4200 Control Workstation is delivered. You need to remove and replace it with a newer copy as guided below:
1. Make sure you have set up a directory server in the platform, set up the hardware of E4200 Control Workstation as described in Install hardware and power on E4200 on page 6, and have done Prepare O.S. from page 7.
2. Uninstall the preinstalled VMS Manager from your E4200 Control Workstation:(1). Click Windows® Start button | Control Panel | Programs | Programs and
Features.(2). Right-click on an entry named GVD VMS Manager 3.x.x.
(3). Click the Uninstall/change command that shows.(4). Click the Yes button to confirm the uninstallation. Then follow the onscreen
instructions to go through the uninstallation.(5). Restart the system.
E4200 Control Workstation & D4200 Video Wall Decoder - Quick Start Guide14
Install software: E4200: Pure Management Console
6. Get an optical disk drive. Connect the optical disk drive to an external power source and also to the E4200 Control Workstation. Then insert the Installer CD in the optical disk drive.
Optical disk drive
E4200 Control Workstation
2. Connect the optical disk drive to an external power source as well.
1. Connect the optical disk drive to the E4200 Control Workstation.
3. Then insert the Installer CD to the optical disk drive.
Wall socket
An Installer then opens onscreen.
In case the Installer doesn't open automatically, manually run the installer on the CD at: \Software\Autorun.exe
E4200 Control Workstation & D4200 Video Wall Decoder - Quick Start Guide 15
Install software: E4200: Pure Management Console
7. Click the 2nd option "Install VMS Manager".So the option becomes highlighted.
Click
8. Click the Install button there below.
Click
E4200 Control Workstation & D4200 Video Wall Decoder - Quick Start Guide16
Install software: E4200: Pure Management Console
The Installer then prepares to install the software. Then a Setup Wizard opens.
9. Follow the onscreen instructions to proceed.
10. See the installation manual of GVD Central Management Platform to know how to proceed.
E4200 Control Workstation & D4200 Video Wall Decoder - Quick Start Guide 17
Install software: E4200: Combo
This section will guide you to install the software for the E4200 Control Workstation to work as a "Combo", which means the management console doubles as a directory server.
Install a "Combo" to get a lighter and cost-friendly command-center solution.
Start to install a "Combo" in your E4200 Control Workstation:
1. Make sure you have set up a directory server in the platform, set up the hardware of E4200 Control Workstation as described in Install hardware and power on E4200 on page 6, and have done Prepare O.S. from page 7.
2. Get an optical disk drive. Connect the optical disk drive to an external power source and also to the E4200 Control Workstation. Then insert the Installer CD in the optical disk drive
Optical disk drive
E4200 Control Workstation
2. Connect the optical disk drive to an external power source as well.
1. Connect the optical disk drive to the E4200 Control Workstation.
3. Then insert the Installer CD to the optical disk drive.
Wall socket
E4200 Control Workstation & D4200 Video Wall Decoder - Quick Start Guide18
Install software: E4200: Combo
The Installer then opens onscreen.
In case the Installer doesn't open automatically, manually run the installer on the CD at: \Software\Autorun.exe
3. Click the 3rd option "Install Combo".So the option becomes highlighted.
Click
E4200 Control Workstation & D4200 Video Wall Decoder - Quick Start Guide 19
Install software: E4200: Combo
4. Click the Install button there below.
Click
The installer then prepares to install the software. Then the Setup Wizard opens.
5. See the installation manual of GVD Central Management Platform to proceed.
E4200 Control Workstation & D4200 Video Wall Decoder - Quick Start Guide20
Install software: D4200
The D4200 Video Wall Decoder needs some services to support GVD Central Management Platform and deliver video walls. As long as you have set up a directory server, a management console, and NVRs in the platform, and have done: Install hardware and power on D4200 on page 6 and Prepare O.S. for the D4200 from page 7, you can proceed to install the software for your D4200 Video Wall Decoder:
1. From the drive D: of the D4200 Video Wall Decoder, find an executable file named GVD_VMS_Decoder_3.xx.x.exe, which is the program to install decoder services.
3. Follow the onscreen instructions to proceed.
4. See the installation manual of GVD Central Management Platform to know how to proceed.
2. Double-click and run the install program.An install wizard then opens.
E4200 Control Workstation & D4200 Video Wall Decoder - Quick Start Guide 21
Appendix I: Set up a PC-based Single Directory Server
A PC-based Single Directory Server is a directory server that hardware-wise relies on one PC to bring a standard directory-server solution that satisfies basic needs. If you are using a PC for the Single Directory Server, the PC has to meet these requirements:
PC-based Single Directory ServerHardware-wise w/ one PC
Hardware Requirement
CPU 4th-gen Intel® Core™ i3 4350RAM 2 x 8GB DDR3-1600HDD size 1TBOS disk size 60GB SSDOS Windows® 10, Windows® Server 2016, Windows® Server 2012
Follow the guide below to set up a PC-based Single Directory Server:
E4200 Control Workstation & D4200 Video Wall Decoder - Quick Start Guide22
Appendix I: Set up a PC-based Single Directory Server
3
2 1
4
PC
1. Connect your C5002 or PC to a power source.
2. Connect a monitor.
3. Connect a pair of keyboard and mouse.
4. Connect to your local area network.
5. Hit the power button of your PC.
PC
5
E4200 Control Workstation & D4200 Video Wall Decoder - Quick Start Guide 23
Appendix I: Set up a PC-based Single Directory Server
6. Set up Windows®, including display language, regional settings, date, time, time zone, screen resolutions, and network parameters. For details, see the installation manual of GVD Central Management Platform.
7. If your PC is powered by Windows® Server 2012 or 2016, manage the password policy as described in Appendix II: Manage password policy for Windows® 2012/ 2016; OTHERWISE JUST IGNORE and proceed to step 8.
8. Get an optical disk drive. Connect it to an external power source and also to the PC.
9. Get the Installer CD, which comes with GVD E4200 Control Workstation and D4200 Video Wall Decoder. Insert the Installer CD in the optical disk drive.
Optical disk drive
Connect the optical disk drive to an external power source as well.
Connect the optical disk
drive to your PC.
Then insert the Installer CD to the optical disk drive.
Wall socketPC
E4200 Control Workstation & D4200 Video Wall Decoder - Quick Start Guide24
Appendix I: Set up a PC-based Single Directory Server
The Installer then opens onscreen.
In case the Installer doesn't open automatically, manually run the Installer on the CD at: \Software\Autorun.exe
10. Click the 1st option "Install Single DS".So the option is selected by a highlight.
11. Click the Install button there below.
In case you want to manually run the install program on the CD at \Software\S_Directory Server.exe, run it as administrator.
E4200 Control Workstation & D4200 Video Wall Decoder - Quick Start Guide 25
Appendix I: Set up a PC-based Single Directory Server
The installer then prepares to install the software.
Then the Setup Wizard opens.
11. Follow the onscreen instructions to proceed.
12. See the installation manual of GVD Central Management Platform to know how to proceed.
E4200 Control Workstation & D4200 Video Wall Decoder - Quick Start Guide26
Appendix II: Manage password policy for Windows® 2012/2016
If the PC, on which your Single Directory Server is based, is powered by Windows® Server 2012 or 2016, you have to to adjust the password policy before software is installed. OTHERWISE JUST IGNORE this appendix and go back to step 8 in Appendix I.
Start to adjust password policy for your PC-based Single Directory Server powered by Windows® Server 2012/2016:
1. Click Windows® Start button. In the Search Programs and files field, enter "gpedit.msc". Then hit the Enter key.A Local Group Policy Editor window then opens.
2. From the left pane that provides a Local Computer Policy tree, expand Computer Configuration | Windows Settings | Security Settings | Account Policies | Password Policy.
Then a number of password policies shows in the right pane.
E4200 Control Workstation & D4200 Video Wall Decoder - Quick Start Guide 27
Appendix II: Manage password policy for Windows® 2012/2016
3. From the right pane, double-click on an entry named Maximum password age. Then change the Password will expire in: setting to 0 day. Then click the OK button.
4. From the right pane, double-click on the entry Password must meet complexity requirements. Then change the setting to Disabled. Then click the OK button.
5. Close the utility.
6. Proceed to install directory services as described from step 8 in Appendix I.
Remember to restore the setting to Enabled after the directory server is set up.