CENELEC-European Committee for Electrotechnical ...
242
Standards Manager Web Standards List CENELEC-European Committee for Electrotechnical Standardization Id Number Title Year Organization Page 1 EN 45554 General methods for the assessment of the ability to repair, reuse and upgrade energy-related products 2020 CENELEC 2 EN 50090-5-1 Home and Building Electronic Systems (HBES) - Part 5-1: Media and media dependent layers - Power line for HBES Class 1 2020 CENELEC 3 EN 50090-5-2 Home and Building Electronic Systems (HBES) Part 5-2: Media and media dependent layers - Network based on HBES Class 1, Twisted Pair 2020 CENELEC 4 EN 50119 Railway applications - Fixed installations - Electric traction overhead contact lines 2020 CENELEC 5 EN 50131-2-4 Alarm systems - Intrusion and hold-up systems - Part 2-4: Requirements for combined passive infrared and microwave detectors 2020 CENELEC 6 EN 50131-13 Alarm systems - Intrusion and hold-up systems - Part 13: Pyrotechnic Obscuration Security Devices 2020 CENELEC 7 EN 50212 Connectors for thermoelectric sensors 2020 CENELEC 8 EN 50305 Railway applications - Railway rolling stock cables having special fire performance - Test methods 2020 CENELEC 9 EN 50306-1 Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 1: General requirements 2020 CENELEC 10 EN 50306-2 Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 2: Single core cables 2020 CENELEC 11 EN 50306-3 Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 3: Single core and multicore cables screened and thin wall sheathed 2020 CENELEC 12 EN 50306-4 Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 4: Multicore and multipair screened or not screened sheathed cables 2020 CENELEC 13 EN 50341-2-1 Overhead electrical lines exceeding AC 1 kV - Part 2-1: National Normative Aspects (NNAs) for Austria 2020 CENELEC 14 EN 50342-4 Lead-acid starter batteries - Part 4: Dimensions of batteries for heavy vehicles 2020 CENELEC 15 EN 50367 Railway applications - Fixed installations and rolling stock - Criteria to achieve technical compatibility between pantographs and overhead contact line 2020 CENELEC 16 EN 50397-1 Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV AC and not exceeding 36 kV AC - Part 1: Covered conductors 2020 CENELEC 17 EN 50520 Cover plates and cover tapes for the protection and location warning of buried cables or buried conduits in underground installations 2020 CENELEC 18 EN 50546 Railway applications - Rolling Stock - Three-phase shore (external) supply system for rail vehicles and its connectors 2020 CENELEC 19 EN 50600-4-6 Information technology - Data centre facilities and infrastructures - Part 4-6: Energy Reuse Factor 2020 CENELEC 20 EN 50600-4-7 Information technology - Data centre facilities and infrastructures - Part 4-7: Cooling Efficiency Ratio 2020 CENELEC 21 EN 50614 Requirements for the preparing for re-use of waste electrical and electronic equipment 2020 CENELEC 22 EN 50678 General procedure for verifying the effectiveness of the protective measures of electrical equipment after repair 2020 CENELEC 23 EN 50708-1-1 Power transformers - Additional European requirements: Part 1- 1: Common part - General requirements 2020 CENELEC 24 EN 50708-2-1 Power transformers - Additional European requirements: Part 2- 1 Medium power transformer - General requirements 2020 CENELEC 25 EN 50708-3-1 Power transformers - Additional European requirements: Part 3-1 Large power transformer - General requirements 2020 CENELEC 26 EN 61482-2 Live working - Protective clothing against the thermal hazards of an electric arc - Part 2: Requirements 2020 CENELEC 27 EN 62552-1 Household refrigerating appliances - Characteristics and test methods - Part 1: General requirements 2020 CENELEC 28 EN 62552-2 Household refrigerating appliances - Characteristics and test methods - Part 2: Performance requirements 2020 CENELEC 29 EN 62552-3 Household refrigerating appliances - Characteristics and test methods - Part 3: Energy consumption and volume 2020 CENELEC
Transcript of CENELEC-European Committee for Electrotechnical ...
Standards Manager Web Standards ListCENELEC-European Committee for Electrotechnical Standardization
Id Number Title Year Organization Page1 EN 45554 General methods for the assessment of the ability to repair, reuse and upgrade energy-related products 2020 CENELEC 2 EN 50090-5-1 Home and Building Electronic Systems (HBES) - Part 5-1: Media and media dependent layers - Power line for HBES Class
12020 CENELEC
3 EN 50090-5-2 Home and Building Electronic Systems (HBES) Part 5-2: Media and media dependent layers - Network based on HBESClass 1, Twisted Pair
2020 CENELEC
4 EN 50119 Railway applications - Fixed installations - Electric traction overhead contact lines 2020 CENELEC 5 EN 50131-2-4 Alarm systems - Intrusion and hold-up systems - Part 2-4: Requirements for combined passive infrared and microwave
detectors2020 CENELEC
6 EN 50131-13 Alarm systems - Intrusion and hold-up systems - Part 13: Pyrotechnic Obscuration Security Devices 2020 CENELEC 7 EN 50212 Connectors for thermoelectric sensors 2020 CENELEC 8 EN 50305 Railway applications - Railway rolling stock cables having special fire performance - Test methods 2020 CENELEC 9 EN 50306-1 Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 1: General
requirements2020 CENELEC
10 EN 50306-2 Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 2: Single core cables 2020 CENELEC 11 EN 50306-3 Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 3: Single core and
multicore cables screened and thin wall sheathed2020 CENELEC
12 EN 50306-4 Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 4: Multicore andmultipair screened or not screened sheathed cables
2020 CENELEC
13 EN 50341-2-1 Overhead electrical lines exceeding AC 1 kV - Part 2-1: National Normative Aspects (NNAs) for Austria 2020 CENELEC 14 EN 50342-4 Lead-acid starter batteries - Part 4: Dimensions of batteries for heavy vehicles 2020 CENELEC 15 EN 50367 Railway applications - Fixed installations and rolling stock - Criteria to achieve technical compatibility between
pantographs and overhead contact line2020 CENELEC
16 EN 50397-1 Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV AC and not exceeding 36kV AC - Part 1: Covered conductors
2020 CENELEC
17 EN 50520 Cover plates and cover tapes for the protection and location warning of buried cables or buried conduits in undergroundinstallations
2020 CENELEC
18 EN 50546 Railway applications - Rolling Stock - Three-phase shore (external) supply system for rail vehicles and its connectors 2020 CENELEC 19 EN 50600-4-6 Information technology - Data centre facilities and infrastructures - Part 4-6: Energy Reuse Factor 2020 CENELEC 20 EN 50600-4-7 Information technology - Data centre facilities and infrastructures - Part 4-7: Cooling Efficiency Ratio 2020 CENELEC 21 EN 50614 Requirements for the preparing for re-use of waste electrical and electronic equipment 2020 CENELEC 22 EN 50678 General procedure for verifying the effectiveness of the protective measures of electrical equipment after repair 2020 CENELEC 23 EN 50708-1-1 Power transformers - Additional European requirements: Part 1- 1: Common part - General requirements 2020 CENELEC 24 EN 50708-2-1 Power transformers - Additional European requirements: Part 2- 1 Medium power transformer - General requirements 2020 CENELEC 25 EN 50708-3-1 Power transformers - Additional European requirements: Part 3-1 Large power transformer - General requirements 2020 CENELEC 26 EN 61482-2 Live working - Protective clothing against the thermal hazards of an electric arc - Part 2: Requirements 2020 CENELEC 27 EN 62552-1 Household refrigerating appliances - Characteristics and test methods - Part 1: General requirements 2020 CENELEC 28 EN 62552-2 Household refrigerating appliances - Characteristics and test methods - Part 2: Performance requirements 2020 CENELEC 29 EN 62552-3 Household refrigerating appliances - Characteristics and test methods - Part 3: Energy consumption and volume 2020 CENELEC
30 EN 62841-4-1 Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 4-1:Particular requirements for chain saws
2020 CENELEC
31 EN IEC 55036 Electric and hybrid electric road vehicles - Radio disturbance characteristics - Limits and methods of measurement for theprotection of off-board receivers below 30 MHz
2020 CENELEC
32 EN IEC 60034-2-3
Rotating electrical machines - Part 2-3: Specific test methods for determining losses and efficiency of converter-fed ACmotors
2020 CENELEC
33 EN IEC 60034-3
Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines orcombustion gas turbines and for synchronous compensators
2020 CENELEC
34 EN IEC 60034-5
Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines(IP code) - Classification
2020 CENELEC
35 EN IEC 60045-1
Steam turbines - Part 1: Specifications 2020 CENELEC
36 EN IEC 60068-3-7
Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers fortests A (Cold) and B (Dry heat) (with load)
2020 CENELEC
37 EN IEC 60076-22-7
Power transformers - Part 22-7: Power transformer and reactor fittings - Accessories and fittings 2020 CENELEC
38 EN IEC 60076-24
Power transformers - Part 24: Specification of voltage regulating distribution transformers (VRDT) 2020 CENELEC
39 EN IEC 60086-6
Primary batteries - Part 6: Guidance on environmental aspects 2020 CENELEC
40 EN IEC 60098 Analogue audio disk records and reproducing equipment 2020 CENELEC 41 EN IEC 60112 Method for the determination of the proof and the comparative tracking indices of solid insulating materials 2020 CENELEC 42 EN IEC 60118-
13Electroacoustics - Hearing aids - Part 13: Requirements and methods of measurement for electromagnetic immunity tomobile digital wireless devices
2020 CENELEC
43 EN IEC 60120 Ball and socket couplings of string insulator units - Dimensions 2020 CENELEC 44 EN IEC 60263 Scales and sizes for plotting frequency characteristics and polar diagrams 2020 CENELEC 45 EN IEC 60268-
16Sound system equipment - Part 16: Objective rating of speech intelligibility by speech transmission index 2020 CENELEC
46 EN IEC 60268-22
Sound system equipment - Part 22: Electrical and mechanical measurements on transducers 2020 CENELEC
47 EN IEC 60282-1
High-voltage fuses - Part 1: Current-limiting fuses 2020 CENELEC
48 EN IEC 60282-4
High-voltage fuses - Part 4: Additional testing requirements for high-voltage expulsion fuses utilizing polymeric insulators 2020 CENELEC
49 EN IEC 60296 Fluids for electrotechnical applications - Mineral insulating oils for electrical equipment 2020 CENELEC 50 EN IEC 60317-
0-2Specifications for particular types of winding wires - Part 0-2: General requirements - Enamelled rectangular copper wire 2020 CENELEC
51 EN IEC 60317-0-4
Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound, resin or varnishimpregnated, bare or enamelled rectangular copper wire
2020 CENELEC
52 EN IEC 60317-0-6
Specifications for particular types of winding wires - Part 0-6: General requirements - Glass-fibre wound resin or varnishimpregnated, bare or enamelled round copper wire
2020 CENELEC
53 EN IEC 60317-12
Specifications for particular types of winding wires - Part 12: Polyvinyl acetal enamelled round copper wire, class 120 2020 CENELEC
54 EN IEC 60317-17
Specifications for particular types of winding wires - Part 17: Polyvinyl acetal enamelled rectangular copper wire, class 105 2020 CENELEC
55 EN IEC 60317-18
Specifications for particular types of winding wires - Part 18: Polyvinyl acetal enamelled rectangular copper wire, class 120 2020 CENELEC
56 EN IEC 60317-25
Specifications for particular types of winding wires - Part 25: Polyester or polyesterimide overcoated with polyamide-imideenamelled round aluminium wire, class 200
2020 CENELEC
57 EN IEC 60317-27-1
Specifications for particular types of winding wires - Part 27-1: Paper tape covered round copper wire 2020 CENELEC
58 EN IEC 60317-27-2
Specifications for particular types of winding wires - Part 27-2: Paper tape covered round aluminium wire 2020 CENELEC
59 EN IEC 60317-27-4
Specifications for particular types of winding wires - Part 27-4: Paper tape covered rectangular aluminium wire 2020 CENELEC
60 EN IEC 60317-60-1
Specifications for particular types of winding wires - Part 60-1: Polyester glass-fibre wound fused, unvarnished, bare orenamelled rectangular copper wire, temperature index 155
2020 CENELEC
61 EN IEC 60317-60-2
Specifications for particular types of winding wires - Part 60-2: Polyester glass-fibre wound, resin or varnish impregnated,bare or enamelled rectangular copper wire, temperature index 155
2020 CENELEC
62 EN IEC 60317-61
Specifications for particular types of winding wires - Part 61: Polyester glass-fibre wound, resin or varnish impregnated,bare or enamelled rectangular copper wire, temperature index 180
2020 CENELEC
63 EN IEC 60317-62
Specifications for particular types of winding wires - Part 62: Polyester glass-fibre wound, silicone resin or varnishimpregnated, bare or enamelled rectangular copper wire, temperature index 200
2020 CENELEC
64 EN IEC 60317-70-2
Specifications for particular types of winding wires - Part 70-2: Polyester glass-fibre wound resin/varnish impregnated,bare or enamelled round copper wire, temperature index 155
2020 CENELEC
65 EN IEC 60317-71
Specifications for particular types of winding wires - Part 71: Polyester glass-fibre wound and resin or varnish impregnated,bare or enamelled round copper wire, temperature index 180
2020 CENELEC
66 EN IEC 60317-72
Specifications for particular types of winding wires - Part 72: Polyester glass-fibre wound silicone resin/varnishimpregnated, bare or enamelled round copper wire, temperature index 200
2020 CENELEC
67 EN IEC 60317-82
Specifications for particular types of winding wires - Part 82: Polyesterimide enamelled rectangular copper wire, class 200 2020 CENELEC
68 EN IEC 60335-2-71
Household and similar electrical appliances - Safety - Part 2-71: Particular requirements for electrical heating appliances forbreeding and rearing animals
2020 CENELEC
69 EN IEC 60335-2-87
Household and similar electrical appliances - Safety - Part 2-87: Particular requirements for electrical animal-stunningequipment
2020 CENELEC
70 EN IEC 60352-3
Solderless connections - Part 3: Accessible insulation displacement (ID) connections - General requirements, test methodsand practical guidance
2020 CENELEC
71 EN IEC 60352-4
Solderless connections - Part 4: Non-accessible insulation displacement (ID) connections - General requirements, testmethods and practical guidance
2020 CENELEC
72 EN IEC 60352-5
Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance 2020 CENELEC
73 EN IEC 60372 Locking devices for ball and socket couplings of string insulator units - Dimensions and tests 2020 CENELEC 74 EN IEC 60384-
13Fixed capacitors for use in electronic equipment - Part 13: Sectional specification - Fixed polypropylene film dielectricmetal foil DC capacitors
2020 CENELEC
75 EN IEC 60401-1
Terms and nomenclature for cores made of magnetically soft ferrites - Part 1: Terms used for physical irregularities andreference of dimensions
2020 CENELEC
76 EN IEC 60404-7
Magnetic materials - Part 7: Method of measurement of the coercivity (up to 160 kA/m) of magnetic materials in an openmagnetic circuit
2020 CENELEC
77 EN IEC 60471 Clevis and tongue couplings of string insulator units - Dimensions 2020 CENELEC 78 EN IEC 60512-
9-5Connectors for electrical and electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Currentloading, cyclic
2020 CENELEC
79 EN IEC 60519-1
Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements 2020 CENELEC
80 EN IEC 60519-8
Safety in installations for electroheating and electromagnetic processing - Part 8: Particular requirements for electroslagremelting furnaces
2020 CENELEC
81 EN IEC 60565-1
Underwater acoustics - Hydrophones - Calibration of hydrophones - Part 1: Procedures for free-field calibration ofhydrophones
2020 CENELEC
82 EN IEC 60580 Medical electrical equipment - Dose area product meters 2020 CENELEC 83 EN IEC 60601-
2-20Medical electrical equipment - Part 2-20: Particular requirements for the basic safety and essential performance of infanttransport incubators
2020 CENELEC
84 EN IEC 60601-2-22
Medical electrical equipment - Part 2-22: Particular requirements for basic safety and essential performance of surgical,cosmetic, therapeutic and diagnostic laser equipment
2020 CENELEC
85 EN IEC 60601-2-31
Medical electrical equipment - Part 2-31: Particular requirements for the basic safety and essential performance of externalcardiac pacemakers with internal power source
2020 CENELEC
86 EN IEC 60601-2-66
Medical electrical equipment - Part 2-66: Particular requirements for the basic safety and essential performance of hearingaids and hearing aid systems
2020 CENELEC
87 EN IEC 60601-2-83
Medical electrical equipment - Part 2-83: Particular requirements for the basic safety and essential performance of homelight therapy equipment - Incorporates Amendment A11: 2021
2020 CENELEC
88 EN IEC 60603-7
Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors 2020 CENELEC
89 EN IEC 60645-3
Electroacoustics - Audiometric equipment - Part 3: Test signals of short duration 2020 CENELEC
90 EN IEC 60664-1
Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests 2020 CENELEC
91 EN IEC 60667-1
Vulcanized fibre for electrical purposes - Part 1: Definitions and general requirements 2020 CENELEC
92 EN IEC 60667-2
Vulcanized fibre for electrical purposes - Part 2: Methods of test 2020 CENELEC
93 EN IEC 60667-3-1
Vulcanized fibre for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Flat sheets 2020 CENELEC
94 EN IEC 60695-1-12
Fire hazard testing - Part 1-12: Guidance for assessing the fire hazard of electrotechnical products - Fire safety engineering 2020 CENELEC
95 EN IEC 60704-2-1
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-1:Particular requirements for dry vacuum cleaners
2020 CENELEC
96 EN IEC 60704-2-7
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-7:Particular requirements for fans
2020 CENELEC
97 EN IEC 60704-2-8
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-8:Particular requirements for electric shavers, hair clippers or trimmers
2020 CENELEC
98 EN IEC 60704-2-17
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-17:Particular requirements for dry-cleaning robots
2020 CENELEC
99 EN IEC 60721-3-0
Classification of environmental conditions - Part 3-0: Classification of groups of environmental parameters and theirseverities - Introduction
2020 CENELEC
100 EN IEC 60730-2-7
Automatic electrical controls - Part 2-7: Particular requirements for timers and time switches 2020 CENELEC
101 EN IEC 60730-2-8
Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operatedwater valves, including mechanical requirements
2020 CENELEC
102 EN IEC 60730-2-11
Automatic electrical controls - Part 2-11: Particular requirements for energy regulators 2020 CENELEC
103 EN IEC 60730-2-22
Automatic electrical controls - Part 2-22: Particular requirements for thermal motor protectors 2020 CENELEC
104 EN IEC 60747-5-5
Semiconductor devices - Part 5-5: Optoelectronic devices - Photocouplers 2020 CENELEC
105 EN IEC 60747-17
Semiconductor devices - Part 17: Magnetic and capacitive coupler for basic and reinforced insulation 2020 CENELEC
106 EN IEC 60749-15
Semiconductor devices - Mechanical and climatic test methods - Part 15: Resistance to soldering temperature for through-hole mounted devices
2020 CENELEC
107 EN IEC 60749-20
Semiconductor devices - Mechanical and climatic test methods - Part 20: Resistance of plastic encapsulated SMDs to thecombined effect of moisture and soldering heat
2020 CENELEC
108 EN IEC 60749-30
Semiconductor devices - Mechanical and climatic test methods - Part 30: Preconditioning of non-hermetic surface mountdevices prior to reliability testing
2020 CENELEC
109 EN IEC 60749-41
Semiconductor devices - Mechanical and climatic test methods - Part 41: Standard reliability testing methods of non-volatile memory devices
2020 CENELEC
110 EN IEC 60779 Installations for electroheating and electromagnetic processing - Test methods for electroslag remelting furnaces 2020 CENELEC 111 EN IEC 60794-
1-215Optical fibre cables - Part 1-215: Generic specification - Basic optical cable test procedures - Environmental test methods -Cable external freezing test, Method F15
2020 CENELEC
112 EN IEC 60794-2-50
Optical fibre cables - Part 2-50: Indoor cables - Family specification for simplex and duplex cables for use in terminatedcable assemblies
2020 CENELEC
113 EN IEC 60794-6-10
Optical fibre cables - Part 6-10: Indoor-outdoor cables - Family specification for universal indoor-outdoor cables 2020 CENELEC
114 EN IEC 60794-6-20
Optical fibre cables - Part 6-20: Indoor-outdoor cables - Family specification for flame retardant outdoor cables 2020 CENELEC
115 EN IEC 60794-6-30
Optical fibre cables - Part 6-30: Indoor-outdoor cables - Family specification for weatherised indoor cables 2020 CENELEC
116 EN IEC 60794-6
Optical fibre cables - Part 6: Indoor-outdoor cables - Sectional specification for indoor-outdoor cables 2020 CENELEC
117 EN IEC 60839-11-5
Alarm and electronic security systems - Part 11-5: Electronic access control systems - Open Supervised Device Protocol(OSDP)
2020 CENELEC
118 EN IEC 60895 Live working - Conductive clothing 2020 CENELEC 119 EN IEC 60904-
1Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics 2020 CENELEC
120 EN IEC 60904-9
Photovoltaic devices - Part 9: Classification of solar simulator characteristics 2020 CENELEC
121 EN IEC 60904-10
Photovoltaic devices - Part 10: Methods of linear dependence and linearity measurements 2020 CENELEC
122 EN IEC 60947-5-2
Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches 2020 CENELEC
123 EN IEC 61000-4-3
Electromagnetic compatibility (EMC) - Part 4-3 : Testing and measurement techniques - Radiated, radio-frequency,electromagnetic field immunity test
2020 CENELEC
124 EN IEC 61000-4-11
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptionsand voltage variations immunity tests for equipment with input current up to 16 A per phase
2020 CENELEC
125 EN IEC 61000-6-8
Electromagnetic compatibility (EMC) - Part 6-8: Generic standards - Emission standard for professional equipment incommercial and light-industrial locations
2020 CENELEC
126 EN IEC 61007 Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and testprocedures
2020 CENELEC
127 EN IEC 61010-2-010
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particularrequirements for laboratory equipment for the heating of materials
2020 CENELEC
128 EN IEC 61010-2-081
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particularrequirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
2020 CENELEC
129 EN IEC 61076-2-012
Connectors for electrical and electronic equipment - Product Requirements - Part 2-012: Circular connectors - Detailspecification for connectors with inner push-pull locking based on M12 connector interfaces according to IEC 61076-2-101, IEC 61076-2-109,
2020 CENELEC
130 EN IEC 61076-2-114
Connectors for electrical and electronic equipment - Product requirements - Part 2-114: Circular connectors - Detailspecification for connectors with M8 screw-locking with power contacts and signal contacts for data transmission up to 100MHz
2020 CENELEC
131 EN IEC 61076-8-100
Connectors for electrical and electronic equipment - Product requirements - Part 8-100: Power connectors - Detailspecification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for ratedcurrent of 20 A
2020 CENELEC
132 EN IEC 61076-8-101
Connectors for electrical and electronic equipment - Product requirements - Part 8-101: Power connectors - Detailspecification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for ratedcurrent of 40 A
2020 CENELEC
133 EN IEC 61076-8-102
Connectors for electrical and electronic equipment - Product requirements - Part 8-102: Power connectors - Detailspecification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for ratedcurrent of 150 A
2020 CENELEC
134 EN IEC 61108-5
Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part5: BeiDou navigation satellite system (BDS) - Receiver equipment - Performance requirements, methods of testing andrequired test results
2020 CENELEC
135 EN IEC 61123 Reliability testing - Compliance test plans for success ratio 2020 CENELEC 136 EN IEC 61163-
2Reliability stress screening - Part 2: Components 2020 CENELEC
137 EN IEC 61169-1-4
Radio-frequency connectors - Part 1-4: Electrical test methods - Voltage standing wave ratio, return loss and reflectioncoefficient
2020 CENELEC
138 EN IEC 61169-61
Radio-frequency connectors - Part 61: Sectional specification for RF coaxial connectors with 9,5 mm inner diameter ofouter conductor, quick lock coupling, series Q4.1-9.5
2020 CENELEC
139 EN IEC 61169-63
Radio-frequency connectors - Part 63: Sectional specification - RF coaxial connectors with inner diameter of outerconductor 6,5 mm (0,256 in) with bayonet lock - Characteristic impedance 75 ohms (type BNC75)
2020 CENELEC
140 EN IEC 61189-5-504
Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 5-504:General test methods for materials and assemblies - Process ionic contamination testing (PICT)
2020 CENELEC
141 EN IEC 61223-3-6
Evaluation and routine testing in medical imaging departments - Part 3-6: Acceptance and constancy tests - Imagingperformance of mammographic X-ray equipment used in a mammographic tomosynthesis mode of operation
2020 CENELEC
142 EN IEC 61228 Fluorescent ultraviolet lamps used for tanning - Measurement and specification method 2020 CENELEC 143 EN IEC 61280-
4-5Fibre-optic communication subsystem test procedures - Part 4-5: Installed cabling plant - Attenuation measurement ofMPO terminated fibre optic cabling plant using test equipment with MPO interfaces
2020 CENELEC
144 EN IEC 61290-1-1
Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method 2020 CENELEC
145 EN IEC 61293 Marking of electrical equipment with ratings related to electrical supply - Safety requirements 2020 CENELEC 146 EN IEC 61300-
2-56Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-56: Tests -Wind resistance of mounted housing
2020 CENELEC
147 EN IEC 61300-3-55
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-55:Examinations and measurements - Polarisation extinction ratio and keying accuracy of polarisation maintaining, passive,optical components
2020 CENELEC
148 EN IEC 61400-5
Wind energy generation systems - Part 5: Wind turbine blades 2020 CENELEC
149 EN IEC 61400-6
Wind energy generation systems - Part 6: Tower and foundation design requirements 2020 CENELEC
150 EN IEC 61400-27-1
Wind energy generation systems - Part 27-1: Electrical simulation models - Generic models 2020 CENELEC
151 EN IEC 61400-27-2
Wind energy generation systems - Part 27-2: Electrical simulation models - Model validation 2020 CENELEC
152 EN IEC 61439-7
Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, campingsites, market squares, electric vehicle charging stations
2020 CENELEC
153 EN IEC 61496-1
Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests 2020 CENELEC
154 EN IEC 61496-2
Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using activeopto-electronic protective devices (AOPDs)
2020 CENELEC
155 EN IEC 61631 Test method for the mechanical strength of cores made of magnetic oxides 2020 CENELEC 156 EN IEC 61643-
331Components for low-voltage surge protection - Part 331: Performance requirements and test methods for metal oxidevaristors (MOV)
2020 CENELEC
157 EN IEC 61643-341
Components for low-voltage surge protection - Part 341: Performance requirements and test circuits for thyristor surgesuppressors (TSS)
2020 CENELEC
158 EN IEC 61701 Photovoltaic (PV) modules - Salt mist corrosion testing 2020 CENELEC 159 EN IEC 61753-
061-2Fibre optic interconnecting devices and passive components - Performance standard - Part 061-2: Single-mode fibre opticpigtailed style polarization independent isolators for category C - Controlled environments
2020 CENELEC
160 EN IEC 61753-071-02
Fibre optic interconnecting devices and passive components - Performance standard - Part 071-02: Non-connectorizedsingle-mode fibre optic 1 _ 2 and 2 _ 2 spatial switches for category C - Controlled environments
2020 CENELEC
161 EN IEC 61754-35
Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 35: Type LSHEconnector family for harsh environments
2020 CENELEC
162 EN IEC 61756-1
Fibre optic interconnecting devices and passive components - Interface standard for fibre management systems - Part 1:General and guidance
2020 CENELEC
163 EN IEC 61757-1-1
Fibre optic sensors - Part 1-1: Strain measurement - Strain sensors based on fibre Bragg gratings 2020 CENELEC
164 EN IEC 61757-4-3
Fibre optic sensors - Part 4-3: Electric current measurement - Polarimetric method 2020 CENELEC
165 EN IEC 61760-1
Surface mounting technology - Part 1: Standard method for the specification of surface mounting components (SMDs) 2020 CENELEC
166 EN IEC 61788-4
Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sncomposite superconductors
2020 CENELEC
167 EN IEC 61788-7
Superconductivity - Part 7: Electronic characteristic measurements - Surface resistance of high-temperaturesuperconductors at microwave frequencies
2020 CENELEC
168 EN IEC 61788-26
Superconductivity - Part 26: Critical current measurement - DC critical current of RE-Ba-Cu-O composite superconductors 2020 CENELEC
169 EN IEC 61803 Determination of power losses in high-voltage direct current (HVDC) converter stations with line-commutated converters 2020 CENELEC 170 EN IEC 61804-
3Devices and integration in enterprise systems - Function blocks (FB) for process control and electronic device descriptionlanguage (EDDL) - Part 3: EDDL syntax and semantics
2020 CENELEC
171 EN IEC 61804-4
Devices and integration in enterprise systems - Function blocks (FB) for process control and electronic device descriptionlanguage (EDDL) - Part 4: EDD interpretation
2020 CENELEC
172 EN IEC 61804-5
Devices and intergration in enterprise systems - Function blocks (FB) for process control and electronic device descriptionlanguage (EDDL) - Part 5: EDDL Builtin library
2020 CENELEC
173 EN IEC 61810-4
Electromechanical elementary relays - Part 4: General and safety requirements for reed relays 2020 CENELEC
174 EN IEC 61854 Overhead lines - Requirements and tests for spacers 2020 CENELEC 175 EN IEC 61897 Overhead lines - Requirements and tests for Aeolian vibration dampers 2020 CENELEC 176 EN IEC 61960-
4Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries forportable applications - Part 4: Coin secondary lithium cells, and batteries made from them
2020 CENELEC
177 EN IEC 61968-1
Application integration at electric utilities - System interfaces for distribution management - Part 1: Interface architectureand general recommendations
2020 CENELEC
178 EN IEC 61968-5
Application integration at electric utilities - System interfaces for distribution management - Part 5: Distributed energyoptimization
2020 CENELEC
179 EN IEC 61969-1
Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part 1: Design guidelines 2020 CENELEC
180 EN IEC 61969-3
Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part 3: Environmental requirements,tests and safety aspects
2020 CENELEC
181 EN IEC 61970-301
Energy management system application program interface (EMS-API) - Part 301: Common information model (CIM) base 2020 CENELEC
182 EN IEC 61977 Fibre optic interconnecting devices and passive components - Fibre optic fixed filters - Generic specification 2020 CENELEC 183 EN IEC 62003 Nuclear power plants - Instrumentation, control and electrical power systems - Requirements for electromagnetic
compatibility testing2020 CENELEC
184 EN IEC 62024-2
High frequency inductive components - Electrical characteristics and measuring methods - Part 2: Rated current ofinductors for DC-to-DC converters
2020 CENELEC
185 EN IEC 62031 LED modules for general lighting - Safety specifications 2020 CENELEC 186 EN IEC 62041 Transformers, power supplies, reactors and similar products - EMC requirements 2020 CENELEC 187 EN IEC 62056-
8-8Electricity metering data exchange - The DLMS/COSEM suite - Part 8-8: Communication profile for ISO/IEC 14908 seriesnetworks
2020 CENELEC
188 EN IEC 62148-6
Fibre optic active components and devices - Package and interface standards - Part 6: ATM-PON transceivers 2020 CENELEC
189 EN IEC 62149-3
Fibre optic active components and devices - Performance standards - Part 3: Modulator-integrated laser diode transmittersfor 40-Gbit/s fibre optic transmission systems
2020 CENELEC
190 EN IEC 62149-5
Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver andCDR ICs
2020 CENELEC
191 EN IEC 62149-11
Fibre optic active components and devices - Performance standards - Part 11: Multiple channel transmitter/receiver chipscale package with multimode fibre interface
2020 CENELEC
192 EN IEC 62271-104
High-voltage switchgear and controlgear - Part 104: Alternating current switches for rated voltages higher than 52 kV 2020 CENELEC
193 EN IEC 62271-108
High-voltage switchgear and controlgear - Part 108: High-voltage alternating current disconnecting circuit-breakers forrated voltages above 52 kV
2020 CENELEC
194 EN IEC 62282-3-100
Fuel cell technologies - Part 3-100: Stationary fuel cell power systeFuel cell technologies - Part 3-100: Stationary fuel cellpower systems - Safety
2020 CENELEC
195 EN IEC 62282-8-101
Fuel cell technologies - Part 8-101: Energy storage systems using fuel cell modules in reverse mode - Test procedures forthe performance of solid oxide single cells and stacks, including reversible operation
2020 CENELEC
196 EN IEC 62282-8-102
Fuel cell technologies - Part 8-102: Energy storage systems using fuel cell modules in reverse mode - Test procedures forthe performance of single cells and stacks with proton exchange membranes, including reversible operation
2020 CENELEC
197 EN IEC 62282-8-201
No Title - Fuel cell technologies - Part 8-201: Energy storage systems using fuel cell modules in reverse mode - Testprocedures for the performance of power-to-power systems
2020 CENELEC
198 EN IEC 62311 Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz to300 GHz)
2020 CENELEC
199 EN IEC 62343-3-3
Dynamic modules - Part 3-3: Performance specification templates - Wavelength selective switches 2020 CENELEC
200 EN IEC 62351-6
Power systems management and associated information exchange - Data and communications security - Part 6: Security forIEC 61850
2020 CENELEC
201 EN IEC 62351-8
Power systems management and associated information exchange - Data and communications security - Part 8: Role-basedaccess control for power system management
2020 CENELEC
202 EN IEC 62368-3
Audio/video, information and communication technology equipment - Part 3: Safety aspects for DC power transfer throughcommunication cables and ports
2020 CENELEC
203 EN IEC 62384 DC or AC supplied electronic controlgear for LED modules - Performance requirements 2020 CENELEC 204 EN IEC 62386-
105Digital addressable lighting interface - Part 105: Particular requirements for control gear and control devices - FirmwareTransfer
2020 CENELEC
205 EN IEC 62435-3
Electronic components - Long-term storage of electronic semiconductor devices - Part 3: Data 2020 CENELEC
206 EN IEC 62435-8
Electronic components - Long-term storage of electronic semiconductor devices - Part 8: Passive electronic devices 2020 CENELEC
207 EN IEC 62443-3-2
Security for industrial automation and control systems - Part 3-2: Security risk assessment for system design 2020 CENELEC
208 EN IEC 62446-2
Photovoltaic (PV) systems - Requirements for testing, documentation and maintenance - Part 2: Grid connected systems -Maintenance of PV systems
2020 CENELEC
209 EN IEC 62496-4-214
Optical circuit boards - Part 4-214: Interface standards - Terminated waveguide OCB assembly using a single-row thirty-two-channel symmetric PMT connector
2020 CENELEC
210 EN IEC 62541-3
OPC Unified Architecture - Part 3: Address Space Model 2020 CENELEC
211 EN IEC 62541-4
OPC Unified Architecture - Part 4: Services 2020 CENELEC
212 EN IEC 62541-5
OPC Unified Architecture - Part 5: Information Model 2020 CENELEC
213 EN IEC 62541-6
OPC Unified Architecture - Part 6: Mappings 2020 CENELEC
214 EN IEC 62541-7
OPC unified architecture - Part 7: Profiles 2020 CENELEC
215 EN IEC 62541-8
OPC Unified Architecture - Part 8: Data Access 2020 CENELEC
216 EN IEC 62541-9
OPC unified architecture - Part 9: Alarms and conditions 2020 CENELEC
217 EN IEC 62541-10
OPC Unified Architecture - Part 10: Programs 2020 CENELEC
218 EN IEC 62541-11
OPC Unified Architecture - Part 11: Historical Access 2020 CENELEC
219 EN IEC 62541-12
OPC unified architecture - Part 12: Discovery and global services 2020 CENELEC
220 EN IEC 62541-13
OPC Unified Architecture - Part 13: Aggregates 2020 CENELEC
221 EN IEC 62541-14
OPC unified architecture - Part 14: PubSub 2020 CENELEC
222 EN IEC 62566-2
Nuclear power plants - Instrumentation and control systems important to safety - Development of HDL-programmedintegrated circuits - Part 2: HDL-programmed integrated circuits for systems performing category B or C functions
2020 CENELEC
223 EN IEC 62610-6
Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC60297 and IEC 60917 series - Part 6: Air recirculation and bypass of indoor cabinets
2020 CENELEC
224 EN IEC 62614-1
Fibre optics - Multimode launch conditions - Part 1: Launch condition requirements for measuring multimode attenuation 2020 CENELEC
225 EN IEC 62645 Nuclear power plants - Instrumentation, control and electrical power systems - Cybersecurity requirements 2020 CENELEC 226 EN IEC 62656-
8Standardized product ontology register and transfer by data parcels - Part 8: Web service interface for data parcels 2020 CENELEC
227 EN IEC 62680-1-2
Universal serial bus interfaces for data and power - Part 1-2: Common components - USB Power Delivery specification 2020 CENELEC
228 EN IEC 62714-4
Engineering data exchange format for use in industrial automation systems engineering - Automation markup language -Part 4: Logic
2020 CENELEC
229 EN IEC 62769-100
Field device integration (FDI) - Part 100: Profiles - Generic protocols 2020 CENELEC
230 EN IEC 62769-103-1
Field device integration (FDI) - Part 103-1: Profiles - PROFIBUS 2020 CENELEC
231 EN IEC 62769-103-4
Field device integration (FDI) - Part 103-4: Profiles - PROFINET 2020 CENELEC
232 EN IEC 62769-109-1
Field devices integration (FDI) - Part 109-1: Profiles - HART(r) and WirelessHART(r) 2020 CENELEC
233 EN IEC 62769-115-2
Field device integration (FDI) - Part 115-2: Profiles - Modbus- RTU 2020 CENELEC
234 EN IEC 62788-1-7
Measurement procedures for materials used in photovoltaic modules - Part 1-7: Encapsulants - Test procedure of opticaldurability
2020 CENELEC
235 EN IEC 62788-5-1
Measurement procedures for materials used in photovoltaic modules - Part 5-1: Edge seals - Suggested test methods for usewith edge seal materials
2020 CENELEC
236 EN IEC 62788-6-2
Measurement procedures for materials used in photovoltaic modules - Part 6-2: General tests - Moisture permeation testingof polymeric materials
2020 CENELEC
237 EN IEC 62790 Junction boxes for photovoltaic modules - Safety requirements and tests 2020 CENELEC 238 EN IEC 62793 Thunderstorm warning systems - Protection against lightning 2020 CENELEC 239 EN IEC 62828-
4Reference conditions and procedures for testing industrial and process measurement transmitters - Part 4: Specificprocedures for level transmitters
2020 CENELEC
240 EN IEC 62828-5
Reference conditions and procedures for testing industrial and process measurement transmitters - Part 5: Specificprocedures for flow transmitters
2020 CENELEC
241 EN IEC 62832-1
Industrial-process measurement, control and automation - Digital factory framework - Part 1: General principles 2020 CENELEC
242 EN IEC 62832-2
Industrial-process measurement, control and automation - Digital factory framework - Part 2: Model elements 2020 CENELEC
243 EN IEC 62832-3
Industrial-process measurement, control and automation - Digital factory framework - Part 3: Application of DigitalFactory for life cycle management of production systems
2020 CENELEC
244 EN IEC 62885-4
Surface cleaning appliances - Part 4: Cordless dry vacuum cleaners for household or similar use - Methods for measuringthe performance
2020 CENELEC
245 EN IEC 62890 Industrial-process measurement, control and automation - Life-cycle-management for systems and components 2020 CENELEC 246 EN IEC 62932-
1Flow battery energy systems for stationary applications - Part 1: Terminology and general aspects 2020 CENELEC
247 EN IEC 62932-2-1
Flow battery energy systems for stationary applications - Part 2-1: Performance general requirements and test methods 2020 CENELEC
248 EN IEC 62932-2-2
Flow battery energy systems for stationary applications - Part 2- 2: Safety requirements 2020 CENELEC
249 EN IEC 62933-5-2
Electrical energy storage (EES) systems - Part 5-2: Safety requirements for grid-integrated EES systems - Electrochemical-based systems
2020 CENELEC
250 EN IEC 62938 Photovoltaic (PV) modules - Non-uniform snow load testing 2020 CENELEC 251 EN IEC 62941 Terrestrial photovoltaic (PV) modules - Quality system for PV module manufacturing 2020 CENELEC 252 EN IEC 62942 File format for professional transfer and exchange of digital audio data 2020 CENELEC 253 EN IEC 62960 Dependability reviews during the life cycle 2020 CENELEC
254 EN IEC 62966-2
Mechanical structures for electrical and electronic equipment - Aisle containment for IT cabinets - Part 2: Details of airflow, air separation and air cooling requirements
2020 CENELEC
255 EN IEC 62984-1
High-temperature secondary batteries - Part 1: General requirements 2020 CENELEC
256 EN IEC 62984-2
High-temperature secondary batteries - Part 2: Safety requirements and tests 2020 CENELEC
257 EN IEC 62984-3
High-temperature secondary batteries - Part 3: Sodium-based batteries - Performance requirements and tests 2020 CENELEC
258 EN IEC 63005-2
Event video data recorder for road vehicle accidents - Part 2: Test methods for evaluating the performance of basicfunctions
2020 CENELEC
259 EN IEC 63008 Household and similar electrical appliances - Accessibility of control elements, doors, lids, drawers and handles 2020 CENELEC 260 EN IEC 63034 Microspeakers 2020 CENELEC 261 EN IEC 63041-
3Piezoelectric sensors - Part 3: Physical sensors 2020 CENELEC
262 EN IEC 63045 Ultrasonics - Non-focusing short pressure pulse sources including ballistic pressure pulse sources - Characteristics of fields 2020 CENELEC 263 EN IEC 63056 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium
cells and batteries for use in electrical energy storage systems2020 CENELEC
264 EN IEC 63057 Secondary cells and batteries containing alkaline or other nonacid electrolytes - Safety requirements for secondary lithiumbatteries for use in road vehicles not for the propulsion
2020 CENELEC
265 EN IEC 63067 Electrical installations for lighting and beaconing of aerodromes - Connecting devices - General requirements and tests 2020 CENELEC 266 EN IEC 63073-
1Dedicated radionuclide imaging devices - Characteristics and test conditions - Part 1: Cardiac SPECT 2020 CENELEC
267 EN IEC 63078 Installations for electroheating and electromagnetic processing - Test methods for induction through-heating installations 2020 CENELEC 268 EN IEC 63086-
1Household and similar electrical air cleaning appliances - Methods for measuring the performance - Part 1: Generalrequirements
2020 CENELEC
269 EN IEC 63093-1
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 1: General specification 2020 CENELEC
270 EN IEC 63093-2
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 2: Pot-cores for use intelecommunications, power supply, and filter applications
2020 CENELEC
271 EN IEC 63093-3
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 3: Half pot-cores made of ferrite forinductive proximity switches
2020 CENELEC
272 EN IEC 63093-9
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 9: Planar cores 2020 CENELEC
273 EN IEC 63103 Lighting equipment - Non-active mode power measurement 2020 CENELEC 274 EN IEC 63115-
1Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-metal hydride cells andbatteries for use in industrial applications - Part 1: Performance
2020 CENELEC
275 EN IEC 63129 Determination of inrush current characteristics of lighting products 2020 CENELEC 276 EN IEC 63132-
1Guidance for installation procedures and tolerances of hydroelectric machines - Part 1: General aspects 2020 CENELEC
277 EN IEC 63132-2
Guidance for installation procedures and tolerances of hydroelectric machines - Part 2: Vertical generators 2020 CENELEC
278 EN IEC 63132-3
Guidance for installation procedures and tolerances of hydroelectric machines - Part 3: Vertical Francis turbines or pump-turbines
2020 CENELEC
279 EN IEC 63132-4
Guidance for installation procedures and tolerances of hydroelectric machines - Part 4: Vertical Kaplan or propellerturbines
2020 CENELEC
280 EN IEC 63155 Guidelines for the measurement method of power durability for surface acoustic wave (SAW) and bulk acoustic wave(BAW) devices in radio frequency (RF) applications
2020 CENELEC
281 EN IEC 63169 Electrical household and similar cooling and freezing appliances - Food preservation 2020 CENELEC 282 EN IEC 63171-
1Connectors for electrical and electronic equipment - Part 1: Detail specification for two-way, shielded or unshielded, freeand fixed connectors - Mechanical mating information, pin assignment and additional requirements for Type 1 copper LCstyle
2020 CENELEC
283 EN IEC 63171-6
Connectors for electrical and electronic equipment - Part 6: Detail specification for 2-way and 4-way (data/power),shielded, free and fixed connectors for power and data transmission with frequencies up to 600 MHz
2020 CENELEC
284 EN IEC 63172 Electrical accessories - Methodology for determining the energy efficiency class of electrical accessories 2020 CENELEC 285 EN IEC 63180 Methods of measurement and declaration of the detection range of detectors - Passive infrared detectors for major and
minor motion detection2020 CENELEC
286 EN IEC 63181-2
LCD multi-screen display terminals - Part 2: Measuring methods 2020 CENELEC
287 EN IEC 63182-1
Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 1: General specification 2020 CENELEC
288 EN IEC 63182-2
Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 2: Ring-cores 2020 CENELEC
289 EN IEC 63252 Energy consumption of vending machines 2020 CENELEC 290 EN IEC 80601-
2-26Medical electrical equipment - Part 2-26: Particular requirements for the basic safety and essential performance ofelectroencephalographs
2020 CENELEC
291 EN IEC 80601-2-60
Medical electrical equipment - Part 2-60: Particular requirements for the basic safety and essential performance of dentalequipment
2020 CENELEC
292 EN IEC 80601-2-78
Medical electrical equipment - Part 2-78: Particular requirements for basic safety and essential performance of medicalrobots for rehabilitation, assessment, compensation or alleviation
2020 CENELEC
293 EN IEC-IEEE82079-1
Preparation of information for use (instructions for use) of products - Part 1: Principles and general requirements 2020 CENELEC
294 EN IEC 60730-2-9-2019+A2
NULL 2020 CENELEC 0
295 EN IEC 62443-3-2
NULL 2020 CENELEC 0
296 EN IEC 62443-3-3
NULL 2019 CENELEC 0
297 EN IEC 62464-1
NULL 2019 CENELEC 0
298 EN IEC 62465 NULL 2019 CENELEC 0299 EN IEC 62646 NULL 2019 CENELEC 0300 EN IEC 62858 NULL 2019 CENELEC 0301 EN IEC 62976 NULL 2019 CENELEC 0302 EN IEC 63077 NULL 2019 CENELEC 0303 EN IEC-ASTM
62885-6NULL 2019 CENELEC 0
304 EN IEC 60793-2-50
NULL 2019 CENELEC 0
305 EN IEC 60793-2
NULL 2019 CENELEC 0
306 EN IEC 60904-4
NULL 2019 CENELEC 0
307 EN IEC 61188-6-4
NULL 2019 CENELEC 0
308 EN IEC 61238-1-3-2019+A11
NULL 2019 CENELEC 0
309 EN IEC 61300-2-54
NULL 2019 CENELEC 0
310 EN IEC 61535 NULL 2019 CENELEC 0311 EN IEC 61784-
1NULL 2019 CENELEC 0
312 EN IEC 62401 NULL 2019 CENELEC 0313 EN IEC 62443-
2-4-2019+A1NULL 2019 CENELEC 0
314 EN 62841-2-1-2018+A11
NULL 2019 CENELEC 0
315 EN IEC 60077-3
NULL 2019 CENELEC 0
316 EN IEC 60077-4
NULL 2019 CENELEC 0
317 EN IEC 60077-5
NULL 2019 CENELEC 0
318 EN IEC 60309-5
NULL 2019 CENELEC 0
319 EN IEC 60311 NULL 2019 CENELEC 0320 EN IEC 60317-
27-3NULL 2019 CENELEC 0
321 EN IEC 60384-16
NULL 2019 CENELEC 0
322 EN IEC 60512-23-3
NULL 2019 CENELEC 0
323 EN IEC 60512-28-100
NULL 2019 CENELEC 0
324 EN IEC 60730-2-9-2019+A1
NULL 2019 CENELEC 0
325 HD 60364-8-2-2011+A11
NULL 2019 CENELEC 0
326 PD CLC IEC-TR 61508-0
NULL 2019 CENELEC 0
327 PD CLC IEC-TR 61511-0
NULL 2019 CENELEC 0
328 PD CLC IEC-TR 62271-307
NULL 2019 CENELEC 0
329 PD CLC IEC-TR 62453-51-15
NULL 2019 CENELEC 0
330 PD CLC IEC-TR 62453-52-15
NULL 2019 CENELEC 0
331 PD CLC IEC-TS 60079-39
NULL 2019 CENELEC 0
332 PD CLC-TR62453-51-31
NULL 2019 CENELEC 0
333 PD CLC-TR62453-51-90
NULL 2019 CENELEC 0
334 PD CLC-TS50703-1
NULL 2019 CENELEC 0
335 EN 61784-3-12-2010+A1
NULL 2019 CENELEC 0
336 EN 15494 NULL 2019 CENELEC 0337 EN ISO 5398-4 NULL 2019 CENELEC 0338 EN ISO 7263-1 NULL 2019 CENELEC 0339 EN ISO 7263-2 NULL 2019 CENELEC 0340 EN ISO 7886-4 Sterile hypodermic syringes for single use Part 4: Syringes with re-use prevention feature 2019 CENELEC 0341 EN ISO 9697 NULL 2019 CENELEC 0342 EN ISO 9994 NULL 2019 CENELEC 0343 EN ISO 14064-
1Greenhouse gases - Part 1: Specification with guidance at the organization level for quantification and reporting ofgreenhouse gas emissions and removals - CORR: June 30, 2012
2019 CENELEC 0
344 EN ISO 14064-2
Greenhouse gases - Part 2: Specification with guidance at the project level for quantification, monitoring and reporting ofgreenhouse gas emission reductions or removal enhancements - CORR: June 30, 2012
2019 CENELEC 0
345 EN ISO 14064-3
Greenhouse gases - Part 3: Specification with guidance for the validation and verification of greenhouse gas assertions -CORR: April 30, 2012
2019 CENELEC 0
346 EN ISO 14405-2
Geometrical product specifications (GPS) - Dimensional tolerancing Part 2: Dimensions other than linear sizes 2019 CENELEC 0
347 EN ISO 15195 NULL 2019 CENELEC 0348 EN ISO 17226-
1Leather - Chemical determination of formaldehyde content Part 1: Method using high performance liquid chromatography 2019 CENELEC 0
349 EN ISO 17226-2
Leather - Chemical determination of formaldehyde content Part 2: Method using colorimetric analysis - CORR: January 31,2010
2019 CENELEC 0
350 EN ISO 18254-2
NULL 2019 CENELEC 0
351 EN ISO 20166-3
NULL 2019 CENELEC 0
352 ISO 20468-2 NULL 2019 CENELEC 0353 EN ISO 8384 Ships and Marine Technology - Dredgers - Vocabulary - CORR 13356: September 2001 2019 CENELEC 0354 EN 15494 NULL 2019 CENELEC 0355 EN 45556 General method for assessing the proportion of reused components in energy-related products 2019 CENELEC 0356 EN 45558 General method to declare the use of critical raw materials in energy-related products 2019 CENELEC 0357 EN 45559 Methods for providing information relating to material efficiency aspects of energy-related products 2019 CENELEC 0358 EN 50041 Low-voltage switchgear and controlgear - Control switches - Position switches 42,5 x 80 - Dimensions and characteristics 2019 CENELEC 0359 EN 50047 Low-voltage switchgear and controlgear - Control switches - Position switches 30 _ 55 - Dimensions and characteristics 2019 CENELEC 0360 EN 50104 Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods 2019 CENELEC 0361 EN 50117-1 (WITHDRAWN) 1997 Coaxial Cables Used in Cabled Distribution Networks Part 1: Generic Specification (S) 2019 CENELEC 0362 EN 50117-9-1 Coaxial cables Part 9-1: Sectional specification for coaxial cables for analogue and digital signal transmission - Indoor drop
cables for systems operating at 5 MHz - 1 000 MHz2019 CENELEC 0
363 EN 50117-9-2 Coaxial cables Part 9-2: Sectional specification for coaxial cables for analogue and digital signal transmission - Indoor dropcables for systems operating at 5 MHz - 3 000 MHz
2019 CENELEC 0
364 EN 50117-9-3 Coaxial cables Part 9-3: Sectional specification for coaxial cables for analogue and digital signal transmission - Indoor dropcables for systems operating at 5 MHz - 6 000 MHz
2019 CENELEC 0
365 EN 50117-10-1 Coaxial cables Part 10-1: Sectional specification for coaxial cables for analogue and digital signal transmission - Outdoordrop cables for systems operating at 5 MHz - 1 000 MHz
2019 CENELEC 0
366 EN 50117-10-2 Coaxial cables Part 10-2: Sectional specification for coaxial cables for analogue and digital signal transmission - Outdoordrop cables for systems operating at 5 MHz - 3 000 MHz
2019 CENELEC 0
367 EN 50117-11-1 Coaxial cables Part 11-1: Sectional specification for coaxial cables for analogue and digital signal transmission -Distribution and trunk cables for systems operating at 5 MHz - 1 000 MHz
2019 CENELEC 0
368 EN 50117-11-2 Coaxial cables Part 11-2: Sectional specification for coaxial cables for analogue and digital signal transmission -Distribution and trunk cables for systems operating at 5 MHz - 2 000 MHz
2019 CENELEC 0
369 EN 50131-4 Alarm systems - Intrusion and hold-up systems - Part 4: Warning devices 2019 CENELEC 0370 EN 50131-8 Alarm systems - Intrusion and hold-up systems - Part 8: Security fog device/systems 2019 CENELEC 0371 EN 50194-2 Electrical apparatus for the detection of combustible gases in domestic premises Part 2: Electrical apparatus for continuous
operation in a fixed installation in recreational vehicles and similar premises Additional test methods and performancerequiremen
2019 CENELEC 0
372 EN 50238-1 Railway applications _ Compatibility between rolling stock and train detection systems Part 1: General 2019 CENELEC 0373 EN 50291-2 Electrical apparatus for the detection of carbon monoxide in domestic premises Part 2: Electrical apparatus for continuous
operation in a fixed installations in recreational vehicles and similar premises including recreational craft - Additional testmeth
2019 CENELEC 0
374 EN 50341-2-2 Overhead electrical lines exceeding AC 1 kV Part 2-2: National Normative Aspects (NNA) for BELGIUM (based on EN50341-1:2012)
2019 CENELEC 0
375 EN 50341-2-4 Overhead electrical lines exceeding AC 1 kV Part 2-4: National Normative Aspects (NNA) for Germany (based on EN50341-1:2012)
2019 CENELEC 0
376 EN 50341-2-15 Overhead electrical lines exceeding AC 1 kV Part 2-15: National Normative Aspects (NNAs) for the Netherlands (based onEN 50341-1:2012)
2019 CENELEC 0
377 EN 50342-2 NULL 2019 CENELEC 0378 EN 50377-18-1 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -
Part 18-1: type 4+ 4x10.3125 Gb/s MPO (QFSP) transceiver mated with an MPO connector equipped with 12 fibre PPSfibre PPS ferrules term
2019 CENELEC 0
379 EN 50411-3-4 Fibre management systems and protective housings to be used in optical fibre communication systems _ Productspecifications Part 3-4: Wall box for splice to patchcord connections, for category C and A
2019 CENELEC 0
380 EN 50411-4-1 Fibre management systems and protective housings to be used in optical fibre communication systems _ Productspecifications Part 4-1: Passive optical street cabinet for category A
2019 CENELEC 0
381 EN 50413 Basic standard on measurement and calculation procedures for human exposure to electric, magnetic and electromagneticfields (0 Hz - 300 GHz) - AMD: November 30, 2013
2019 CENELEC 0
382 EN 50436-4 Alcohol interlocks - Test methods and performance requirements Part 4: Connection and digital interface between thealcohol interlock and the vehicle
2019 CENELEC 0
383 EN 50499 Procedure for the assessment of the exposure of workers to electromagnetic fields 2019 CENELEC 0384 EN 50518 Monitoring and Alarm Receiving Centre 2019 CENELEC 0385 EN 50549-1 Requirements for generating plants to be connected in parallel with distribution networks Part 1: Connection to a LV
distribution network - Generating plants up to and including Type B - CORR: April 30, 20192019 CENELEC 0
386 EN 50549-2 Requirements for generating plants to be connected in parallel with distribution networks Part 2: Connection to a MVdistribution network - Generating plants up to and including Type B - CORR: April 30, 2019
2019 CENELEC 0
387 EN 50551-1 Simplex and duplex cables to be used for cords Part 1: Blank Detail Specification and minimum requirements 2019 CENELEC 0388 EN 50591 Railway Applications - Rolling Stock - Specification and verification of energy consumption 2019 CENELEC 0
389 EN 50600-1 Information technology - Data centre facilities and infrastructures - Part 1: General concepts 2019 CENELEC 0390 EN 50600-2-2 Information technology - Data centre facilities and infrastructures Part 2-2: Power distribution 2019 CENELEC 0391 EN 50600-2-3 Information technology - Data centre facilities and infrastructures Part 2-3: Environmental control 2019 CENELEC 0392 EN 50668 Railway applications _ Signalling and control systems for non UGTMS Urban Rail systems 2019 CENELEC 0393 EN 50673 Plug-in type bushings for 72,5 kV with 630 A and 1 250 A for electrical equipment 2019 CENELEC 0394 EN 50693 Product category rules for life cycle assessments of electronic and electrical products and systems 2019 CENELEC 0395 EN 50697 Information technology _ Measurement of end-to-end (E2E) links 2019 CENELEC 0396 EN 50980-1 Remote alcohol monitoring devices _ Test methods and performance requirements Part 1: Instruments for assessment
programmes2019 CENELEC 0
397 EN 60076-22-2 Power transformer and reactor cooling equipment Part 22-2: Removable radiators 2019 CENELEC 0398 EN 60601-2-40 Medical Electrical Equipment - Part 2-40: Particular Requirements for Safety - Specification for Electromyographs and
Evoked Response Equipment2019 CENELEC 0
399 EN 60704-3 Household and similar electrical appliances Test code for the determination of airborne acoustical noise Part 3: Procedurefor determining and verifying declared noise emission values
2019 CENELEC 0
400 EN 60898-1 Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations Part 1: Circuit-breakers for a.c. operation
2019 CENELEC 0
401 EN 61643-31 Low-voltage surge protective devices Part 31: Requirements and test methods for SPDs for photovoltaic installations 2019 CENELEC 0402 EN 62841-2-21 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety Part 2-21: Particular
requirements for hand-held drain cleaners2019 CENELEC 0
403 EN 62841-3-12 Electric motor-operated hand-held tools, transportable tools and lawn and arden machinery _ Safety Part 3-12: Particularrequirements for transportable threading machines
2019 CENELEC 0
404 EN 62841-4-2 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety Part 4-2: Particularrequirements for hedge trimmers
2019 CENELEC 0
405 EN IEC 31010 Risk management - Risk assessment techniques 2019 CENELEC 0406 EN IEC 55015 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment 2019 CENELEC 0407 EN IEC 55016-
1-1Specification for radio disturbance and immunity measuring apparatus and methods Part-1-1: Radio disturbance andimmunity measuring apparatus - Measuring apparatus
2019 CENELEC 0
408 EN IEC 55016-1-4
Specification for radio disturbance and immunity measuring apparatus and methods Part 1-4: Radio disturbance andimmunity measuring apparatus - Antennas and test sites for radiated disturbance - measurements
2019 CENELEC 0
409 EN IEC 60027-2
Letter symbols to be used in electrical technology Part 2: Telecommunications and electronics 2019 CENELEC 0
410 EN IEC 60034-23
Rotating electrical machines Part 23: Repair, overhaul and reclamation 2019 CENELEC 0
411 EN IEC 60068-2-82
Environmental testing Part 2-82: Tests - Test Xw1: Whisker test methods for components and parts used in electronicassemblies
2019 CENELEC 0
412 EN IEC 60068-2-85
Environmental testing Part 2-85: Tests - Test Fj: Vibration - Long time history replication 2019 CENELEC 0
413 EN IEC 60068-3-3
Environmental testing Part 3-3: Supporting documentation and guidance _ Seismic test methods for equipment 2019 CENELEC 0
414 EN IEC 60071-1
Insulation co-ordination Part 1: Definitions, principles and rules 2019 CENELEC 0
415 EN IEC 60076-22-1
Power transformers Part 22-1: Power transformer and reactor fittings - Protective devices 2019 CENELEC 0
416 EN IEC 60076-22-3
Power transformers Part 22-3: Power transformer and reactor fittings - Insulating liquid to air heat exchangers 2019 CENELEC 0
417 EN IEC 60076-22-4
Power transformers Part 22-4: Power transformer and reactor fittings - Insulating liquid to water heat exchangers 2019 CENELEC 0
418 EN IEC 60079-15
Explosive atmospheres Part 15: Equipment protection by type of protection "n" 2019 CENELEC 0
419 EN IEC 60079-19
Explosive atmospheres Part 19: Equipment repair, overhaul and reclamation 2019 CENELEC 0
420 EN IEC 60086-4
Primary batteries Part 4: Safety of lithium batteries 2019 CENELEC 0
421 EN IEC 60118-9
Electroacoustics _ Hearing aids Part 9: Methods of measurement of the performance characteristics of bone conductionhearing aids
2019 CENELEC 0
422 EN IEC 60193 Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests 2019 CENELEC 0423 EN IEC 60204-
11Safety of machinery _ Electrical equipment of machines Part 11: Requirements for equipment for voltages above 1 000 VAC or 1 500 V DC and not exceeding 36 kV
2019 CENELEC 0
424 EN IEC 60255-181
Measuring relays and protection equipment Part 181: Functional requirements for frequency protection 2019 CENELEC 0
425 EN IEC 60276 Carbon brushes, brush holders, commutators and slip-rings _ Definitions and nomenclature 2019 CENELEC 0426 EN IEC 60286-
3Packaging of components for automatic handling Part 3: Packaging of surface mount components on continuous tapes 2019 CENELEC 0
427 EN IEC 60317-80
Specifications for particular types of winding wires Part 80: Polyvinyl acetal enamelled rectangular copper wire, class 120,with a bonding layer
2019 CENELEC 0
428 EN IEC 60331-1
Tests for electric cables under fire conditions _ Circuit integrity Part 1: Test method for fire with shock at a temperature ofat least 830°C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm
2019 CENELEC 0
429 EN IEC 60335-2-111
Household and similar electrical appliances - Safety Part 2-111: Particular requirements for electric ondol mattress with anon-flexible heated part
2019 CENELEC 0
430 EN IEC 60384-11
Fixed capacitors for use in electronic equipment Part 11: Sectional specification _ Fixed polyethylene-terephthalate filmdielectric metal foil DC capacitors
2019 CENELEC 0
431 EN IEC 60384-17
Fixed capacitors for use in electronic equipment Part 17: Sectional specification: Fixed metallized polypropylene filmdielectric AC and pulse capacitors
2019 CENELEC 0
432 EN IEC 60384-21
Fixed capacitors for use in electronic equipment Part 21: Sectional specification - Fixed surface mount multilayercapacitors of ceramic dielectric, Class 1
2019 CENELEC 0
433 EN IEC 60384-22
Fixed capacitors for use in electronic equipment Part 22: Sectional specification - Fixed surface mount multilayercapacitors of ceramic dielectric, Class 2
2019 CENELEC 0
434 EN IEC 60480 Specifications for the re-use of sulphur hexafluoride (SF6) and its mixtures in electrical equipment 2019 CENELEC 0435 EN IEC 60512-
11-1Connectors for electrical and electronic equipment - Tests and measurements Part 11-1: Climatic tests - Test 11a - Climaticsequence
2019 CENELEC 0
436 EN IEC 60534-3-1
Industrial-process control valves Part 3-1: Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straightpattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves
2019 CENELEC 0
437 EN IEC 60539-2
Directly heated negative temperature coefficient thermistors Part 2: Sectional specification - Surface mount negativetemperature coefficient thermistors
2019 CENELEC 0
438 EN IEC 60565-2
Underwater acoustics _ Hydrophones _ Calibration of hydrophones Part 2: Procedures for low frequency pressurecalibration
2019 CENELEC 0
439 EN IEC 60601-2-16
Medical electrical equipment Part 2-16: Particular requirements for the basic safety and essential performance ofhaemodialysis, haemodiafiltration and haemofiltration equipment
2019 CENELEC 0
440 EN IEC 60601-2-28
Medical electrical equipment Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tubeassemblies for medical diagnosis
2019 CENELEC 0
441 EN IEC 60601-2-39
Medical electrical equipment Part 2-39: Particular requirements for basic safety and essential performance of peritonealdialysis equipment
2019 CENELEC 0
442 EN IEC 60601-2-46
Medical electrical equipment Part 2-46: Particular requirements for the basic safety and essential performance of operatingtables
2019 CENELEC 0
443 EN IEC 60601-2-75
Medical Electrical Equipment Part 2-75: Particular requirements for the basic safety and essential performance ofphotodynamic therapy and photodynamic diagnosis equipment
2019 CENELEC 0
444 EN IEC 60601-2-76
Medical electrical equipment Part 2-76: Particular requirements for the basic safety and essential performance of lowenergy ionized gas haemostasis equipment
2019 CENELEC 0
445 EN IEC 60633 High-voltage direct current (HVDC) transmission - Vocabulary 2019 CENELEC 0446 EN IEC 60665 A.C. ventilating fans and regulators for household and similar purposes _ Methods for measuring performance 2019 CENELEC 0447 EN IEC 60674-
3-2Specification for plastic films for electrical purposes Part 3: Specifications for individual materials - Sheet 2: Requirementsfor balanced biaxially oriented polyethylene terephthalate (PET) films used for electrical insulation
2019 CENELEC 0
448 EN IEC 60684-3-214
Flexible insulating sleeving Part 3: Specifications for individual types of sleeving _ Sheet 214: Heatshrinkable, polyolefinsleeving, not flame retarded, thick and medium wall
2019 CENELEC 0
449 EN IEC 60684-3-216
Flexible insulating sleeving Part 3: Specifications for individual types of sleeving _ Sheet 216: Heat-shrinkable, flame-retarded, limited-fire-hazard sleeving
2019 CENELEC 0
450 EN IEC 60684-3-247
Flexible insulating sleeving Part 3: Specifications for individual types of sleeving - Sheet 247: Heat-shrinkable, polyolefinsleeving, dual wall, not flame retarded, thick and medium wall
2019 CENELEC 0
451 EN IEC 60684-3-280
Flexible insulating sleeving Part 3: Specifications for individual types of sleeving _ Sheet 280: Heat-shrinkable, polyolefinsleeving, anti-tracking
2019 CENELEC 0
452 EN IEC 60684-3-283
Flexible insulating sleeving Part 3: Specifications for individual types of sleeving _ Sheet 283: Heat-shrinkable, polyolefinsleeving for bus-bar insulation
2019 CENELEC 0
453 EN IEC 60704-2-16
Household and similar electrical appliances _ Test code for the determination of airborne acoustical noise Part 2-16:Particular requirements for washer-dryers
2019 CENELEC 0
454 EN IEC 60709 Nuclear power plants - Instrumentation, control and electrical systems important to safety - Separation 2019 CENELEC 0455 EN IEC 60721-
3-3Classification of environmental conditions Part 3-3: Classification of groups of environmental parameters and theirseverities - Stationary use at weatherprotected locations
2019 CENELEC 0
456 EN IEC 60721-3-4
Classification of environmental conditions Part 3-4: Classification of groups of environmental parameters and theirseverities - Stationary use at non-weatherprotected locations
2019 CENELEC 0
457 EN IEC 60730-2-12
Automatic electrical controls Part 2-12: Particular requirements for electrically operated door locks 2019 CENELEC 0
458 EN IEC 60730-2-14
Automatic electrical controls Part 2-14: Particular requirements for electric actuators 2019 CENELEC 0
459 EN IEC 60730-2-15
Automatic electrical controls Part 2-15: Particular requirements for automatic electrical air flow, water flow and water levelsensing controls
2019 CENELEC 0
460 EN IEC 60746-4
Expression of performance of electrochemical analyzers Part 4: Dissolved oxygen in water measured by membrane-covered amperometric sensors
2019 CENELEC 0
461 EN IEC 60747-16-6
Semiconductor devices Part 16-6: Microwave integrated circuits _ Frequency multipliers 2019 CENELEC 0
462 EN IEC 60749-17
Semiconductor devices Mechanical and climatic test methods Part 17: Neutron irradiation 2019 CENELEC 0
463 EN IEC 60749-18
Semiconductor devices - Mechanical and climatic test methods - Part 18: Ionizing radiation (total dose) 2019 CENELEC 0
464 EN IEC 60754-3
Test on gases evolved during combustion of materials from cables Part 3: Measurement of low level of halogen content byion chromatography
2019 CENELEC 0
465 EN IEC 60793-1-31
Optical fibres Part 1-31: Measurement methods and test procedures _ Tensile strength 2019 CENELEC 0
466 EN IEC 60793-1-40
Optical fibres Part 1-40: Attenuation measurement methods 2019 CENELEC 0
467 EN IEC 60793-2-10
Optical fibres Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres 2019 CENELEC 0
468 EN IEC 60794-1-23
Optical fibre cables Part 1-23: Generic specification _ Basic optical cable test procedures _ Cable element test methods 2019 CENELEC 0
469 EN IEC 60794-2-11
Optical fibre cables Part 2-11: Indoor cables _ Detailed specification for simplex and duplex cables for use in premisescabling
2019 CENELEC 0
470 EN IEC 60794-2-21
Optical fibre cables Part 2-21: Indoor cables - Detailed specification for multi-fibre optical distribution cables for use inpremises cabling
2019 CENELEC 0
471 EN IEC 60794-2-30
Optical fibre cables Part 2-30: Indoor cables - Family specification for optical fibre ribbon cables for use in terminatedcable assemblies
2019 CENELEC 0
472 EN IEC 60794-2-31
Optical fibre cables Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premisescabling
2019 CENELEC 0
473 EN IEC 60825-12
Safety of laser products Part 12: Safety of free space optical communication systems used for transmission of information -CORR: June 30, 2019
2019 CENELEC 0
474 EN IEC 60879 NULL 2019 CENELEC 0475 EN IEC 60904-
3Photovoltaic devices Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectralirradiance data
2019 CENELEC 0
476 EN IEC 60904-7
Photovoltaic devices Part 7: Computation of the spectral mismatch correction for measurements of photovoltaic devices 2019 CENELEC 0
477 EN IEC 60917-1
Modular order for the development of mechanical structures for electrical and electronic equipment practices Part 1:Generic standard
2019 CENELEC 0
478 EN IEC 60934 Circuit-Breakers for Equipment (CBE) 2019 CENELEC 0479 EN IEC 60947-
4-1Low-voltage switchgear and controlgear Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
2019 CENELEC 0
480 EN IEC 60947-7-4
Low-voltage switchgear and controlgear Part 7-4: Ancillary equipment _ PCB terminal blocks for copper conductors 2019 CENELEC 0
481 EN IEC 60947-9-1
Low-voltage switchgear and controlgear Part 9-1: Active arc-fault mitigation systems _ Arc quenching devices 2019 CENELEC 0
482 EN IEC 60964 Nuclear Power Plants - Control rooms - Design - CORR: August 31, 2019 2019 CENELEC 0483 EN IEC 60966-
1Radio frequency and coaxial cable assemblies Part 1: Generic specification - General requirements and test methods 2019 CENELEC 0
484 EN IEC 60974-2
Arc welding equipment Part 2: Liquid cooling systems 2019 CENELEC 0
485 EN IEC 60974-3
Arc welding equipment Part 3: Arc striking and stabilizing devices 2019 CENELEC 0
486 EN IEC 60974-5
Arc welding equipment Part 5: Wire feeders 2019 CENELEC 0
487 EN IEC 60974-7
Arc welding equipment Part 7: Torches 2019 CENELEC 0
488 EN IEC 61000-3-2
Electromagnetic compatibility (EMC) Part 3-2: Limits - Limits for harmonic current emissions (equipment input current?16 A per phase)
2019 CENELEC 0
489 EN IEC 61000-3-11
Electromagnetic compatibility (EMC) Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker inpublic low-voltage supply systems - Equipment with rated current ? 75 A and subject to conditional connection
2019 CENELEC 0
490 EN IEC 61000-4-18
Electromagnetic compatibility (EMC) Part 4-18: Testing and measurement techniques - Damped oscillatory waveimmunity test - CORR: October 31, 2019
2019 CENELEC 0
491 EN IEC 61000-6-1
Electromagnetic compatibility (EMC) Part 6-1: Generic standards - Immunity standard for residential, commercial andlight-industrial environments - CORR: March 31, 2019
2019 CENELEC 0
492 EN IEC 61000-6-2
Electromagnetic compatibility (EMC) Part 6-2: Generic standards - Immunity standard for industrial environments -CORR: March 31, 2019
2019 CENELEC 0
493 EN IEC 61000-6-4
Electromagnetic compatibility (EMC) Part 6-4: Generic standards - Emission standard for industrial environments 2019 CENELEC 0
494 EN IEC 61020-1
Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification 2019 CENELEC 0
495 EN IEC 61058-2-6
Switches for appliances Part 2-6: Particular requirements for switches used in electric motor-operated hand-held tools,transportable tools and lawn and garden machinery
2019 CENELEC 0
496 EN IEC 61076-3-123
Connectors for electrical and electronic equipment - Product requirements Part 3-123: Rectangular connectors - Detailspecification for hybrid connectors for industrial environments, for power supply and fibre optic data transmission, withpush-pull locki
2019 CENELEC 0
497 EN IEC 61076-3-124
Connectors for electrical and electronic equipment - Product requirements Part 3-124: Rectangular connectors - DetailSpecification for 10-way, shielded, free and fixed connectors for I/O and data transmission with frequencies up to 500 MHz
2019 CENELEC 0
498 EN IEC 61131-10
NULL 2019 CENELEC 0
499 EN IEC 61158-1
Industrial communication networks - Fieldbus specifications Part 1: Overview and guidance for the IEC 61158 and IEC61784 series
2019 CENELEC 0
500 EN IEC 61158-3-4
Industrial communication networks - Fieldbus specifications Part 3-4: Data-link layer service definition - Type 4 elements 2019 CENELEC 0
501 EN IEC 61158-3-12
Industrial communication networks - Fieldbus specifications Part 3-12: Data-link layer service definition - Type 12elements
2019 CENELEC 0
502 EN IEC 61158-3-19
Industrial communication networks - Fieldbus specifications Part 3-19: Data-link layer service definition - Type 19elements
2019 CENELEC 0
503 EN IEC 61158-3-21
Industrial communication networks - Fieldbus specifications Part 3-21: Data-link layer service definition - Type 21elements
2019 CENELEC 0
504 EN IEC 61158-3-25
Industrial communication networks - Fieldbus specifications Part 3-25: Data-link layer service definition - Type 25elements
2019 CENELEC 0
505 EN IEC 61158-4-2
Industrial communication networks - Fieldbus specifications Part 4-2: Data-link layer protocol specification - Type 2elements
2019 CENELEC 0
506 EN IEC 61158-4-3
Industrial communication networks - Fieldbus specifications Part 4-3: Data-link layer protocol specification - Type 3elements
2019 CENELEC 0
507 EN IEC 61158-4-4
Industrial communication networks - Fieldbus specifications Part 4-4: Data-link layer protocol specification - Type 4elements
2019 CENELEC 0
508 EN IEC 61158-4-12
Industrial communication networks - Fieldbus specifications Part 4-12: Data-link layer protocol specification - Type 12elements
2019 CENELEC 0
509 EN IEC 61158-4-19
Industrial communication networks - Fieldbus specifications Part 4-19: Data-link layer protocol specification - Type 19elements
2019 CENELEC 0
510 EN IEC 61158-4-21
Industrial communication networks - Fieldbus specifications Part 4-21: Data-link layer protocol specification - Type 21elements
2019 CENELEC 0
511 EN IEC 61158-4-24
Industrial communication networks - Fieldbus specifications Part 4-24: Data-link layer protocol specification - Type 24elements
2019 CENELEC 0
512 EN IEC 61158-4-25
Industrial communication networks - Fieldbus specifications Part 4-25: Data-link layer protocol specification - Type 25elements
2019 CENELEC 0
513 EN IEC 61158-5-2
Industrial communication networks - Fieldbus specifications - Part 5-2: Application layer service definition - Type 2elements
2019 CENELEC 0
514 EN IEC 61158-5-4
Industrial communication networks - Fieldbus specifications Part 5-4: Application layer service definition - Type 4elements
2019 CENELEC 0
515 EN IEC 61158-5-10
Industrial communication networks - Fieldbus specifications Part 5-10: Application layer service definition - Type 10elements
2019 CENELEC 0
516 EN IEC 61158-5-12
Industrial communication networks - Fieldbus specifications Part 5-12: Application layer service definition - Type 12elements
2019 CENELEC 0
517 EN IEC 61158-5-19
Industrial communication networks - Fieldbus specifications Part 5-19: Application layer service definition - Type 19elements
2019 CENELEC 0
518 EN IEC 61158-5-21
Industrial communication networks - Fieldbus specifications Part 5-21: Application layer service definition - Type 21elements
2019 CENELEC 0
519 EN IEC 61158-5-23
Industrial communication networks - Fieldbus specifications Part 5-23: Application layer service definition - Type 23elements
2019 CENELEC 0
520 EN IEC 61158-5-25
Industrial communication networks - Fieldbus specifications Part 5-25: Application layer service definition - Type 25elements
2019 CENELEC 0
521 EN IEC 61158-5-26
Industrial communication networks - Fieldbus specifications Part 5-26: Application layer service definition - Type 26elements
2019 CENELEC 0
522 EN IEC 61158-6-2
Industrial communication networks - Fieldbus specifications Part 6-2: Application layer protocol specification - Type 2elements
2019 CENELEC 0
523 EN IEC 61158-6-3
Industrial communication networks - Fieldbus specifications Part 6-3: Application layer protocol specification - Type 3elements
2019 CENELEC 0
524 EN IEC 61158-6-4
Industrial communication networks _ Fieldbus specifications Part 6-4: Application layer protocol specification _ Type 4elements
2019 CENELEC 0
525 EN IEC 61158-6-10
Industrial communication networks - Fieldbus specifications Part 6-10: Application layer protocol specification - Type 10elements
2019 CENELEC 0
526 EN IEC 61158-6-12
Industrial communication networks - Fieldbus specifications Part 6-12: Application layer protocol specification - Type 12elements
2019 CENELEC 0
527 EN IEC 61158-6-19
Industrial communication networks - Fieldbus specifications Part 6-19: Application layer protocol specification - Type 19elements
2019 CENELEC 0
528 EN IEC 61158-6-21
Industrial Communication Networks - Fieldbus Specifications Part 6-21: Application layer protocol specification - Type 21elements
2019 CENELEC 0
529 EN IEC 61158-6-23
Industrial communication networks _ Fieldbus specifications Part 6-23: Application layer protocol specification _ Type 23elements
2019 CENELEC 0
530 EN IEC 61158-6-25
Industrial communication networks _ Fieldbus specifications Part 6-25: Application layer protocol specification _ Type 25elements
2019 CENELEC 0
531 EN IEC 61158-6-26
Industrial communication networks _ Fieldbus specifications Part 6-26: Application layer protocol specification _ Type 26elements
2019 CENELEC 0
532 EN IEC 61169-1-2
Radio-frequency connectors Part 1-2: Electrical test methods - Insertion loss 2019 CENELEC 0
533 EN IEC 61169-24
Radio-frequency connectors Part 24: Sectional specification _ Radio frequency coaxial connectors with screw coupling,typically for use in 75 O cable networks (type F)
2019 CENELEC 0
534 EN IEC 61169-64
Radio frequency connectors Part 64: Sectional specification - RF coaxial connectors with 0,8 mm inner diameter of outerconductor - Characteristic impedance 50 ? (type 0,8)
2019 CENELEC 0
535 EN IEC 61207-2
Expression of performance of gas analyzers Part 2: Measuring oxygen in gas utilizing high-temperature electrochemicalsensors
2019 CENELEC 0
536 EN IEC 61207-3
Gas analyzers - Expression of performance Part 3: Paramagnetic oxygen analyzers 2019 CENELEC 0
537 EN IEC 61223-3-5
Evaluation and routine testing in medical imaging departments Part 3-5: Acceptance tests and and constancy tests _Imaging performance of computed tomography X-ray equipment
2019 CENELEC 0
538 EN IEC 61238-1-1
Compression and mechanical connectors for power cables Part 1-1: Test methods and requirements for compression andmechanical connectors for power cables for rated voltages up to 1 kV (Um = 1,2 kV) tested on non-insulated conductors
2019 CENELEC 0
539 EN IEC 61238-1-2
Compression and mechanical connectors for power cables Part 1-2: Test methods and requirements for insulation piercingconnectors for power cables for rated voltages up to 1 kV (Um = 1,2 kV) tested on insulated conductors
2019 CENELEC 0
540 EN IEC 61280-4-1
Fibre optic communication subsystem test procedures Part 4_1: Installed cable plant - Multimode attenuation measurement 2019 CENELEC 0
541 EN IEC 61300-2-4
Fibre optic interconnecting devices and passive components _ Basic test and measurement procedures Part 2-4: Tests _Fibre or cable retention
2019 CENELEC 0
542 EN IEC 61300-2-46
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-46: Tests -Damp heat cyclic
2019 CENELEC 0
543 EN IEC 61300-3-21
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-21:Examinations and measurements - Switching time
2019 CENELEC 0
544 EN IEC 61300-3-54
Fibre optic interconnecting devices and passive components _ Basic test and measurement procedures Part 3-54:Examinations and measurements _ Angular misalignment between ferrule bore axis and ferrule axis for cylindrical ferrules
2019 CENELEC 0
545 EN IEC 61315 Calibration of Fibre-Optic Power Meters 2019 CENELEC 0546 EN IEC 61400-
1Wind energy generation systems Part 1: Design requirements - CORR: October 31, 2019 2019 CENELEC 0
547 EN IEC 61400-3-1
Wind energy generation systems Part 3-1: Design requirements for fixed offshore wind turbines 2019 CENELEC 0
548 EN IEC 61400-21-1
Wind energy generation systems Part 21-1: Measurement and assessment of electrical characteristics _ Wind turbines 2019 CENELEC 0
549 EN IEC 61400-24
Wind energy generation systems Part 24: Lightning protection 2019 CENELEC 0
550 EN IEC 61400-26-1
Wind energy generation systems Part 26-1: Availability for wind energy generation systems 2019 CENELEC 0
551 EN IEC 61482-1-1
Live working - Protective clothing against the thermal hazards of an electric arc Part 1-1: Test methods - Method 1:Determination of the arc rating (ELIM, ATPV and/or EBT) of clothing materials and of protective clothing using an openarc
2019 CENELEC 0
552 EN IEC 61496-3
Safety of Machinery - Electro-Sensitive Protective Equipment Part 3: Particular Requirements for Active Opto-ElectronicProtective Devices Responsive to Diffuse Reflection (AOPDDR)
2019 CENELEC 0
553 EN IEC 61500 Nuclear power plants - Instrumentation and control systems important to safety - Data communication in systemsperforming category A functions
2019 CENELEC 0
554 EN IEC 61558-1
Safety of transformers, reactors, power supply units and combinations thereof Part 1: General requirements and tests 2019 CENELEC 0
555 EN IEC 61754-7-3
Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces Part 7-3: Type MPOconnector family - Two fibre rows 16 fibre wide
2019 CENELEC 0
556 EN IEC 61784-2
Industrial communication networks _ Profiles Part 2: Additional fieldbus profiles for real-time networks based onISO/IEC/IEEE 8802-3
2019 CENELEC 0
557 EN IEC 61810-10
Electromechanical elementary relays Part 10: Additional functional aspects and safety requirements for high-capacityrelays
2019 CENELEC 0
558 EN IEC 61820-1
Electrical installations for aeronautical ground lighting at aerodromes Part 1: Fundamental principles 2019 CENELEC 0
559 EN IEC 61850-8-2
Communication networks and systems for power utility automation Part 8-2: Specific Communication Service Mapping(SCSM) - Mapping to Extensible Messaging Presence Protocol (XMPP)
2019 CENELEC 0
560 EN IEC 61851-1
Electric vehicle conductive charging system Part 1: General requirements 2019 CENELEC 0
561 EN IEC 61857-32
Electrical insulation systems - Procedures for thermal evaluation Part 32: Multifactor evaluation with increased factorsduring diagnostic testing
2019 CENELEC 0
562 EN IEC 61869-9
Instrument transformers Part 9: Digital interface for instrument transformers 2019 CENELEC 0
563 EN IEC 61869-14
Instrument transformers Part 14: Additional requirements for current transformers for DC applications 2019 CENELEC 0
564 EN IEC 61869-15
Instrument transformers Part 15: Additional requirements for voltage transformers for DC applications 2019 CENELEC 0
565 EN IEC 61952-1
Insulators for overhead lines _ Composite line post insulators for AC systems with a nominal voltage greater than 1 000 VPart 1: Definitions, end fittings and designations
2019 CENELEC 0
566 EN IEC 61967-1
Integrated circuits - Measurement of electromagnetic emissions Part 1: General conditions and definitions 2019 CENELEC 0
567 EN IEC 61968-4
Application integration at electric utilities - System interfaces for distribution management Part 4: Interfaces for records andasset management
2019 CENELEC 0
568 EN IEC 62025-2
High frequency inductive components _ Non-electrical characteristics and measuring methods Part 2: Test methods fornon-electrical characteristics
2019 CENELEC 0
569 EN IEC 62026-1
Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) Part 1: General rules 2019 CENELEC 0
570 EN IEC 62040-1
Uninterruptible power systems (UPS) Part 1: Safety requirements - CORR: November 30, 2019 2019 CENELEC 0
571 EN IEC 62056-8-4
Electricity metering data exchange - the DLMS/COSEM suite Part 8-4: Communication profiles for narrow-band OFDMPLC PRIME neighbourhood networks
2019 CENELEC 0
572 EN IEC 62087-7
Audio, video, and related equipment - Methods of measurement for power consumption Part 7: Computer monitors 2019 CENELEC 0
573 EN IEC 62097 Hydraulic machines, radial and axial _ Methodology for performance transposition from model to prototype 2019 CENELEC 0574 EN IEC 62129-
3Calibration of wavelength/optical frequency measurement instruments Part 3: Optical frequency meters internallyreferenced to a frequency comb
2019 CENELEC 0
575 EN IEC 62138 Nuclear power plants _ Instrumentation and control systems important to safety _ Software aspects for computer-basedsystems performing category B or C functions
2019 CENELEC 0
576 EN IEC 62148-19
Fibre optic active components and devices - Package and interface standards Part 19: Photonic chip scale package 2019 CENELEC 0
577 EN IEC 62148-21
Fibre optic active components and devices - Package and interface standards Part 21: Design guide of electrical interface ofPIC packages using silicon fine-pitch ball grid array (S-FBGA) and silicon fine-pitch land grid array (S-FLGA)
2019 CENELEC 0
578 EN IEC 62209-3
Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields fromhand-held and body-mounted wireless communication devices Part 3: Vector measurement-based systems (Frequencyrange of 600 MHz to 6 GHz)
2019 CENELEC 0
579 EN IEC 62228-3
Integrated circuits - EMC evaluation of transceivers Part 3: CAN transceivers 2019 CENELEC 0
580 EN IEC 62271-107
High-voltage switchgear and controlgear Part 107: Alternating current fused circuit-switchers for rated voltages above 1 kVup to and including 52 kV
2019 CENELEC 0
581 EN IEC 62271-109
High-voltage switchgear and controlgear Part 109: Alternating-current series capacitor by-pass switches 2019 CENELEC 0
582 EN IEC 62271-209
High-voltage switchgear and controlgear Part 209: Cable connections for gas-insulated metal-enclosed switchgear for ratedvoltages above 52 kV - Fluid-filled and extruded insulation cables - Fluid-filled and dry-type cable-terminations
2019 CENELEC 0
583 EN IEC 62271-214
High-voltage switchgear and controlgear Part 214: Internal arc classification for metal-enclosed pole-mounted switchgearand controlgear for rated voltages above 1 kV and up to and including 52 kV
2019 CENELEC 0
584 EN IEC 62275 Cable management systems - Cable ties for electrical installations 2019 CENELEC 0585 EN IEC 62281 Safety of primary and secondary lithium cells and batteries during transport 2019 CENELEC 0586 EN IEC 62282-
6-400Fuel cell technologies Part 6-400: Micro fuel cell power systems _ Power and data interchangeability 2019 CENELEC 0
587 EN IEC 62290-3
Railway applications - Urban guided transport management and command/control systems Part 3: System requirementsspecification
2019 CENELEC 0
588 EN IEC 62327 Radiation protection instrumentation - Hand-held instruments for the detection and identification of radionuclides and forthe estimation of ambient dose equivalent rate from photon radiation
2019 CENELEC 0
589 EN IEC 62343-1
Dynamic modules Part 1: Performance standards - General conditions 2019 CENELEC 0
590 EN IEC 62343-2-1
Dynamic modules Part 2-1: Reliability qualification - Test template 2019 CENELEC 0
591 EN IEC 62364 Hydraulic machines _ Guide for dealing with hydro-abrasive erosion in Kaplan, Francis, and Pelton turbines 2019 CENELEC 0592 EN IEC 62386-
104NULL 2019 CENELEC 0
593 EN IEC 62386-220
Digital addressable lighting interface Part 220: Particular requirements for control gear - Centrally supplied emergencyoperation (device type 19)
2019 CENELEC 0
594 EN IEC 62402 Obsolescence management 2019 CENELEC 0595 EN IEC 62433-
1EMC IC modelling Part 1: General modelling framework 2019 CENELEC 0
596 EN IEC 62474 Material declaration for products of and for the electrotechnical industry 2019 CENELEC 0597 EN IEC 62496-
4-1Optical circuit boards Part 4-1: Interface standards - Terminated waveguide OCB assembly using single-row twelve-channel PMT connectors
2019 CENELEC 0
598 EN IEC 62631-3-4
Dielectric and resistive properties of solid insulating materials Part 3-4: Determination of resistive properties (DC methods)- Volume resistance and volume resistivity at elevated temperatures
2019 CENELEC 0
599 EN IEC 62660-1
Secondary lithium-ion cells for the propulsion of electric road vehicles Part 1: Performance testing 2019 CENELEC 0
600 EN IEC 62660-2
Secondary lithium-ion cells for the propulsion of electric road vehicles Part 2: Reliability and abuse testing 2019 CENELEC 0
601 EN IEC 62668-1
Process management for avionics _ Counterfeit prevention Part 1: Avoiding the use of counterfeit, fraudulent and recycledelectronic components
2019 CENELEC 0
602 EN IEC 62668-2
Process management for avionics _ Counterfeit prevention Part 2: Managing electronic components from non-franchisedsources
2019 CENELEC 0
603 EN IEC 62676-2-31
Video surveillance systems for use in security applications Part 2-31: Live streaming and control based on web services 2019 CENELEC 0
604 EN IEC 62676-2-32
Video surveillance systems for use in security applications Part 2-32: Recording control and replay based on web services 2019 CENELEC 0
605 EN IEC 62677-3-103
Heat-shrinkable low and medium voltage moulded shapes Part 3: Specification for individual materials _ Sheet 103: Heat-shrinkable, polyolefin, conductive moulded shapes for medium voltage applications
2019 CENELEC 0
606 EN IEC 62680-1-5
Universal serial bus interfaces for data and power Part 1-5: Common components _ USB Audio 3.0 device class definition 2019 CENELEC 0
607 EN IEC 62680-1-6
Universal serial bus interfaces for data and power Part 1-6: Common components _ USB Audio 3.0 device class definitionbasic functions
2019 CENELEC 0
608 EN IEC 62680-1-7
Universal serial bus interfaces for data and power Part 1-7: Common components _ USB Audio 3.0 device class definitiondata formats
2019 CENELEC 0
609 EN IEC 62680-1-8
Universal serial bus interfaces for data and power Part 1-8: Common components _ USB Audio 3.0 device class definitionterminal types
2019 CENELEC 0
610 EN IEC 62812 Low resistance measurements - Methods and guidance 2019 CENELEC 0611 EN IEC 62840-
2Electric vehicle battery swap system Part 2: Safety requirements 2019 CENELEC 0
612 EN IEC 62878-1
Device embedding assembly technology Part 1: Generic specification for device embedded substrates 2019 CENELEC 0
613 EN IEC 62878-2-5
Device embedding assembly technology Part 2-5: Guidelines _ Implementation of a 3D data format for device embeddedsubstrate
2019 CENELEC 0
614 EN IEC 62884-4
Measurement techniques of piezoelectric, dielectric and electrostatic oscillators Part 4: Short-term frequency stability testmethods
2019 CENELEC 0
615 EN IEC 62885-8
Surface cleaning appliances Part 8: Dry vacuum cleaners for commercial use _ Methods for measuring the performance 2019 CENELEC 0
616 EN IEC 62885-9
Surface cleaning appliances Part 9: Floor treatment machines with or without traction drive, for commercial use _ Methodsfor measuring the performance
2019 CENELEC 0
617 EN IEC 62892 Extended thermal cycling of PV modules _ Test procedure 2019 CENELEC 0618 EN IEC 62902 Secondary cells and batteries - Marking symbols for identification of their chemistry 2019 CENELEC 0619 EN IEC 62909-
2Bi-directional grid-connected power converters Part 2: Interface of GCPC and distributed energy resources 2019 CENELEC 0
620 EN IEC 62962 Particular requirements for load-shedding equipment (LSE) 2019 CENELEC 0621 EN IEC 62966-
1Mechanical structures for electrical and electronic equipment _ Aisle containment for IT cabinets Part 1: Dimensions andmechanical requirements
2019 CENELEC 0
622 EN IEC 62985 Methods for calculating size specific dose estimates (SSDE) on computed tomography 2019 CENELEC 0623 EN IEC 63006 Wireless power transfer (WPT) - Glossary of terms 2019 CENELEC 0624 EN IEC 63009 Ultrasonics _ Physiotherapy systems _ Field specifications and methods of measurement in the frequency range 20 kHz to
500 kHz2019 CENELEC 0
625 EN IEC 63012 NULL 2019 CENELEC 0626 EN IEC 63013 LED packages _ Long-term luminous and radiant flux maintenance projection 2019 CENELEC 0627 EN IEC 63033-
2Car multimedia systems and equipment - Drive monitoring system Part 2: Recording methods of the drive monitoringsystem
2019 CENELEC 0
628 EN IEC 63033-3
Car multimedia systems and equipment - Drive monitoring system Part 3: Measurement methods 2019 CENELEC 0
629 EN IEC 63044-5-1
Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) Part 5-1: EMCrequirements, conditions and test set-up
2019 CENELEC 0
630 EN IEC 63044-5-2
Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) Part 5-2: EMCrequirements for HBES/BACS used in residential, commercial and light-industrial environments
2019 CENELEC 0
631 EN IEC 63044-5-3
Home and building electronic systems (HBES) and building automation and control systems (BACS) Part 5-3: EMCrequirements for HBES/BACS used in industrial environments
2019 CENELEC 0
632 EN IEC 63093-4
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities Part 4: RM-cores 2019 CENELEC 0
633 EN IEC 63093-12
Draft BS EN 63093-12 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities.Part 12: Ring-cores 2019 CENELEC 0
634 EN IEC 63093-13
Ferrite cores _ Guidelines on dimensions and the limits of surface irregularities Part 13: PQ-cores 2019 CENELEC 0
635 EN IEC 63093-14
Ferrite cores _ Guidelines on dimensions and the limits of surface irregularities Part 14: EFD-cores 2019 CENELEC 0
636 EN IEC 63119-1
Information exchange for electric vehicle charging roaming service Part 1: General 2019 CENELEC 0
637 EN IEC 63128 Lighting control interface for dimming _ Analogue voltage dimming interface for electronic current sourcing controlgear 2019 CENELEC 0638 EN IEC 63135 Maritime navigation and radiocommunication equipment and systems _ Automatic identification systems (AIS) _ SAR
Airborne equipment _ Operational and performance requirements, methods of test and required test results2019 CENELEC 0
639 EN IEC 63136 Electric dishwashers for commercial use - Test methods for measuring the performance 2019 CENELEC 0640 EN IEC 63137-
1Standard test radio-frequency connectors Part 1: Generic specification - General requirements and test methods 2019 CENELEC 0
641 EN IEC 63138-1
Multi-channel radio frequency connectors Part 1: Generic specification - General requirements and test methods 2019 CENELEC 0
642 EN IEC 63146 NULL 2019 CENELEC 0643 EN IEC 63202-
1Photovoltaic cells Part 1: Measurement of light-induced degradation of crystalline silicon photovoltaic cells 2019 CENELEC 0
644 EN IEC 80601-2-30
Medical electrical equipment Part 2-30: Particular requirements for the basic safety and essential performance of automatednon-invasive sphygmomanometers
2019 CENELEC 0
645 EN IEC 80601-2-49
Medical electrical equipment Part 2-49: Particular requirements for the basic safety and essential performance ofmultifunction patient monitoring equipment
2019 CENELEC 0
646 EN IEC 80601-2-59
Medical electrical equipment Part 2-59: Particular requirements for the basic safety and essential performance of screeningthermographs for human febrile temperature screening
2019 CENELEC 0
647 EN IEC 81346-2
Industrial systems, installations and equipment and industrial products _ Structuring principles and reference designationsPart 2: Classification of objects and codes for classes
2019 CENELEC 0
648 EN ISO 5398-4 NULL 2019 CENELEC 0649 EN ISO 7263-1 NULL 2019 CENELEC 0650 EN ISO 7263-2 NULL 2019 CENELEC 0651 EN ISO 7886-4 Sterile hypodermic syringes for single use Part 4: Syringes with re-use prevention feature 2019 CENELEC 0652 EN ISO 8384 Ships and Marine Technology - Dredgers - Vocabulary - CORR 13356: September 2001 2019 CENELEC 0653 EN ISO 9697 NULL 2019 CENELEC 0654 EN ISO 9994 NULL 2019 CENELEC 0655 EN ISO 14064-
1Greenhouse gases - Part 1: Specification with guidance at the organization level for quantification and reporting ofgreenhouse gas emissions and removals - CORR: June 30, 2012
2019 CENELEC 0
656 EN ISO 14064-2
Greenhouse gases - Part 2: Specification with guidance at the project level for quantification, monitoring and reporting ofgreenhouse gas emission reductions or removal enhancements - CORR: June 30, 2012
2019 CENELEC 0
657 EN ISO 14064-3
Greenhouse gases - Part 3: Specification with guidance for the validation and verification of greenhouse gas assertions -CORR: April 30, 2012
2019 CENELEC 0
658 EN ISO 14405-2
Geometrical product specifications (GPS) - Dimensional tolerancing Part 2: Dimensions other than linear sizes 2019 CENELEC 0
659 EN ISO 15195 NULL 2019 CENELEC 0660 EN ISO 17226-
1Leather - Chemical determination of formaldehyde content Part 1: Method using high performance liquid chromatography 2019 CENELEC 0
661 EN ISO 17226-2
Leather - Chemical determination of formaldehyde content Part 2: Method using colorimetric analysis - CORR: January 31,2010
2019 CENELEC 0
662 EN ISO 18254-2
NULL 2019 CENELEC 0
663 EN ISO 20166-3
NULL 2019 CENELEC 0
664 HD 60364-8-1 Low-voltage electrical installations Part 8-1: Energy efficiency 2019 CENELEC 0665 ISO 16900?1 NULL 2019 CENELEC 0666 ISO 20468-2 NULL 2019 CENELEC 0667 PAS 2035-2030 Online - 1 Licence 2019 CENELEC 0668 PAS 2035-2030 Online - 1 Licence 2019 CENELEC 0669 PD CLC IEC-
TR 62453-52-31
Field device tool (FDT) interface specification Part 52-31: Communication implementation for common languageinfrastructure - IEC 61784 CP 3/1 and CP 3/2
2019 CENELEC 0
670 PD CLC IEC-TR 62453-52-32
Field device tool (FDT) interface specification Part 52-32: Communication implementation for common languageinfrastructure - IEC 61784 CP 3/4, CP 3/5 and CP 3/6
2019 CENELEC 0
671 PD CLC IEC-TR 62453-52-90
Field device tool (FDT) interface specification Part 52-90: Communication implementation for common languageinfrastructure - IEC 61784 CPF 9
2019 CENELEC 0
672 PD CLC-TR50600-99-1
Information technology - Data centre facilities and infrastructures Part 99-1: Recommended practices for energymanagement
2019 CENELEC 0
673 PD CLC-TR50600-99-2
Information technology - Data centre facilities and infrastructures Part 99-2: Recommended practices for environmentalsustainability
2019 CENELEC 0
674 PD CLC-TR62453-51-20
Field device tool (FDT) interface specification Part 51-20: Communication implementation for common object model _IEC 61784 CPF 2
2019 CENELEC 0
675 PD CLC-TR62453-51-32
Field device tool (FDT) interface specification Part 51-32: Communication implementation for common object model - IEC61784 CP 3/4, CP 3/5 and CP 3/6
2019 CENELEC 0
676 PD CLC-TR62453-51-60
Field device tool (FDT) interface specification Part 51-60: Communication implementation for common object model - IEC61784 CPF 6
2019 CENELEC 0
677 PD CLC-TRIEC 62453-41
Field device tool (FDT) interface specification - Part 41: Object model integration profile - Common object model 2019 CENELEC 0
678 PD CLC-TRIEC 62453-51-10
Field device tool (FDT) interface specification Part 51-10: Communication implementation for common object model _IEC 61784 CPF 1
2019 CENELEC 0
679 PD CLC-TS50238-3
NULL 2019 CENELEC 0
680 PD CLC-TS50586
Open Smart Grid Protocol (OSGP) 2019 CENELEC 0
681 PD CLC-TS50677
Clothes washing machines and washer-dryers for household and similar use - Method for the determination of rinsingeffectiveness by measurement of the surfactant content at textile materials
2019 CENELEC 0
682 EN 50083-2-4 NULL 2019 CENELEC 0683 EN 50121-3-2-
2016+A1NULL 2019 CENELEC 0
684 EN 50121-4-2016+A1
NULL 2019 CENELEC 0
685 EN 50325-1 Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces Part 1: Generalrequirements
2019 CENELEC 0
686 EN 50341-2-24 NULL 2019 CENELEC 0687 EN 50411-3-3 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-3:
Singlemode optical fibre fusion splice protectors2019 CENELEC 0
688 EN 50411-3-4 Fibre management systems and protective housings to be used in optical fibre communication systems _ Productspecifications Part 3-4: Wall box for splice to patchcord connections, for category C and A
2019 CENELEC 0
689 EN 50676 NULL 2019 CENELEC 0690 EN 60188-
2001+A11NULL 2019 CENELEC 0
691 EN 60317-20-2014+A1
NULL 2019 CENELEC 0
692 EN 60317-21-2014+A1
NULL 2019 CENELEC 0
693 EN 60601-2-63-2015+A1
NULL 2019 CENELEC 0
694 EN 60662-2012+A11
NULL 2019 CENELEC 0
695 EN IEC 62909-1
Bi-directional grid-connected power converters - Part 1: General requirements 2018 CENELEC 0
696 EN IEC 62919 Content management - Monitoring and management of personal digital content 2018 CENELEC 0697 EN IEC 60332-
3-21Tests on electric and optical fibre cables under fire conditions - Part 3-21: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A F/R
2018 CENELEC 0
698 EN IEC 63032 Fibre optic interconnecting devices and passive components - Fibre optic tuneable bandpass filters - Generic specification 2018 CENELEC 0699 EN IEC 62485-
2Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries 2018 CENELEC 0
700 EN IEC 60375 Conventions concerning electric circuits 2018 CENELEC 0701 EN IEC 61869-
11Instrument transformers - Part 11: Additional requirements for low-power passive voltage transformers 2018 CENELEC 0
702 EN 60598-2-4 Luminaires - Part 2: Particular requirements - Section 4: Portable general purpose luminaires 2018 CENELEC 0703 EN IEC 60721-
2-4Classification of environmental conditions - Part 2-4: Environmental conditions appearing in nature - Solar radiation andtemperature
2018 CENELEC 0
704 EN 62841-2-1 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particularrequirements for hand-held drills and impact drills
2018 CENELEC 0
705 EN IEC-IEEE65700-19-03
NULL 2018 CENELEC 0
706 EN IEC 61970-302
Energy management system application program interface (EMS-API) Part 302: Common information model (CIM)dynamics
2018 CENELEC 0
707 EN 50064 High-voltage switchgear and controlgear _ Gas-filled wrought aluminium and aluminium alloy enclosures 2018 CENELEC 0708 EN 50068 High-Voltage Switchgear and Controlgear _ Gas-filled wrought steel enclosures 2018 CENELEC 0709 EN 50069 High-voltage switchgear and controlgear - Gas-filled welded composite enclosures of cast and wrought aluminium alloys 2018 CENELEC 0710 EN 50129 Railway applications _ Communication, signalling and processing systems _ Safety related electronic systems for
signalling - CORR: May 31, 20192018 CENELEC 0
711 EN 50318 Railway applications - Current collection systems - Validation of simulation of the dynamic interaction between pantographand overhead contact line
2018 CENELEC 0
712 EN 50341-2-12 Overhead electrical lines exceeding AC 1 kV Part 2-12: National Normative Aspects (NNA) for ICELAND (based on EN50341-1:2012)
2018 CENELEC 0
713 EN 62784 Vacuum cleaners and dust extractors providing equipment protection level Dc for the collection of combustible dusts _Particular requirements
2018 CENELEC 0
714 EN IEC 60034-14
Rotating electrical machines Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher _Measurement, evaluation and limits of vibration severity
2018 CENELEC 0
715 EN IEC 60076-11
Power transformers Part 11: Dry-type transformers 2018 CENELEC 0
716 EN IEC 60268-4
Sound system equipment Part 4: Microphones 2018 CENELEC 0
717 EN IEC 60297-3-110
Mechanical structures for electrical and electronic equipment _ Dimensions of mechanical structures of the 482,6 mm (19in) series Part 3-110: Residential racks and cabinets for smart houses
2018 CENELEC 0
718 EN IEC 60358-4
Coupling capacitors and capacitor dividers Part 4: DC and AC single-phase capacitor dividers 2018 CENELEC 0
719 EN IEC 60404-13
Magnetic materials Part 13: Methods of measurement of resistivity, density and stacking factor of electrical steel strip andsheet
2018 CENELEC 0
720 EN IEC 60512-1
Connectors for electrical and electronic equipment _ Tests and measurements Part 1: Generic specification 2018 CENELEC 0
721 EN IEC 60793-1-49
Optical fibres Part 1-49: Measurement methods and test procedures - Differential mode delay 2018 CENELEC 0
722 EN IEC 60794-4-20
Optical fibre cables Part 4-20: Sectional specification _ Aerial optical cables along electrical power lines _ Familyspecification for ADSS (all dielectric self-supported) optical cables
2018 CENELEC 0
723 EN IEC 60974-14
Arc welding equipment Part 14: Calibration, validation and consistency testing - CORR: January 31, 2019 2018 CENELEC 0
724 EN IEC 61051-1
Varistors for use in electronic equipment Part 1: Generic specification 2018 CENELEC 0
725 EN IEC 61191-1
Printed Board Assemblies Part 1: Generic Specification - Requirements for Soldered Electrical and Electronic AssembliesUsing Surface Mount and Related Assembly Technologies
2018 CENELEC 0
726 EN IEC 61326-3-2
Electrical equipment for measurement, control and laboratory use - EMC requirements Part 3_2: Immunity requirementsfor safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrialapplications wit
2018 CENELEC 0
727 EN IEC 61340-6-1
Electrostatics Part 6-1: Electrostatic control for healthcare - General requirements for facilities 2018 CENELEC 0
728 EN IEC 61375-2-6
Electronic railway equipment - Train communication network (TCN) Part 2-6: On-board to ground communication 2018 CENELEC 0
729 EN IEC 61753-1
Fibre optic interconnecting devices and passive components _ Performance standard Part 1: General and guidance - CORR:July 31, 2019
2018 CENELEC 0
730 EN IEC 61784-5-3
Industrial communication networks - Profiles Part 5-3: Installation of fieldbuses - Installation profiles for CPF 3 2018 CENELEC 0
731 EN IEC 61788-25
Superconductivity Part 25: Mechanical properties measurement - Room temperature tensile test on REBCO wires 2018 CENELEC 0
732 EN IEC 61853-3
Photovoltaic (PV) module performance testing and energy rating Part 3: Energy rating of PV modules 2018 CENELEC 0
733 EN IEC 61853-4
Photovoltaic (PV) module performance testing and energy rating Part 4: Standard reference climatic profiles 2018 CENELEC 0
734 EN IEC 61918 NULL 2018 CENELEC 0735 EN IEC 61993-
2Maritime navigation and radiocommunication equipment and systems _ Automatic Identification Systems (AIS) Part 2:Class A shipborne equipment of the automatic identification system (AIS) _ Operational and performance requirements,methods of test and requ
2018 CENELEC 0
736 EN IEC 62005-9-4
Fibre optic interconnecting devices and passive components _ Reliability Part 9-4: High power qualification of passiveoptical components for environmental category C
2018 CENELEC 0
737 EN IEC 62149-10
Fibre optic active components and devices - Performance standards Part 10: Radio-over-fibre (RoF) transceivers for mobilefronthaul
2018 CENELEC 0
738 EN IEC 62239-1
Process management for avionics - Management plan Part 1: Preparation and maintenance of an electronic componentsmanagement plan
2018 CENELEC 0
739 EN IEC 62325-503
Framework for energy market communications Part 503: Market data exchanges guidelines for the IEC 62325-351 profile 2018 CENELEC 0
740 EN IEC 62435-6
Electronic components - Long-term storage of electronic semiconductor devices Part 6: Packaged or finished devices 2018 CENELEC 0
741 EN IEC 62746-10-3
Systems interface between customer energy management system and the power management system Part 10-3: Openautomated demand response _ Adapting smart grid user interfaces to the IEC common information model
2018 CENELEC 0
742 EN IEC 62862-3-2
Solar thermal electric plants Part 3-2: Systems and components _ General requirements and test methods for large-sizeparabolic-trough collectors
2018 CENELEC 0
743 EN IEC 62881 Cause and effect matrix - CORR: July 31, 2019 2018 CENELEC 0744 EN IEC 62923-
1Maritime navigation and radiocommunication equipment and systems _ Bridge alert management Part 1: Operational andperformance requirements, methods of testing and required test results
2018 CENELEC 0
745 EN IEC 62923-2
Maritime navigation and radiocommunication equipment and systems _ Bridge alert management Part 2: Alert and clusteridentifiers and other additional features
2018 CENELEC 0
746 EN IEC 62961 Insulating liquids - Test methods for the determination of interfacial tension of insulating liquids - Determination with thering method
2018 CENELEC 0
747 EN IEC 63000 Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardoussubstances
2018 CENELEC 0
748 EN 50341-2-20 Overhead electrical lines exceeding AC 45 kV Part 2-20: National Normative Aspects (NNA) for ESTONIA (based on EN50341-1:2012)
2018 CENELEC 0
749 EN IEC 60268-21
Sound system equipment Part 21: Acoustical (output-based) measurements 2018 CENELEC 0
750 EN IEC 60728-113
Cable networks for television signals, sound signals and interactive services Part 113: Optical systems for broadcast signaltransmissions loaded with digital channels only
2018 CENELEC 0
751 EN IEC 60793-1-32
Optical fibres Part 1-32: Measurement methods and test procedures - Coating strippability 2018 CENELEC 0
752 EN IEC 60869-1
Fibre optic interconnecting devices and passive components - Fibre optic passive power control Part 1: Genericspecification
2018 CENELEC 0
753 EN IEC 61784-5-2
Industrial communication networks - Profiles Part 5-2: Installation of fieldbuses - Installation profiles for CPF 2 2018 CENELEC 0
754 EN IEC 61784-5-6
Industrial communication networks - Profiles Part 5-6: Installation of fieldbuses - Installation profiles for CPF 6 2018 CENELEC 0
755 EN IEC 61784-5-8
Industrial communication networks _ Profiles Part 5-8: Installation of fieldbuses _ Installation profiles for CPF 8 2018 CENELEC 0
756 EN IEC 61784-5-12
Industrial communication networks - Profiles Part 5-12: Installation of fieldbuses - Installation profiles for CPF 12 2018 CENELEC 0
757 EN IEC 61784-5-18
Industrial communication networks _ Profiles Part 5-18: Installation of fieldbuses _ Installation profiles for CPF 18 2018 CENELEC 0
758 EN IEC 61784-5-20
Industrial communication networks - Profiles Part 5-20: Installation of fieldbuses - Installation profiles for CPF 20 2018 CENELEC 0
759 EN IEC 62351-4
Power systems management and associated information exchange _ Data and communications security Part 4: Profilesincluding MMS and derivatives
2018 CENELEC 0
760 EN IEC 62885-5
Surface cleaning appliances Part 5: High pressure cleaners and steam cleaners for household and commercial use _Methods for measuring performance
2018 CENELEC 0
761 EN IEC 63093-6
Ferrite cores _ Guidelines on dimensions and the limits of surface irregularities Part 6: ETD-cores for use in power supplies 2018 CENELEC 0
762 EN IEC 63093-8
Ferrite cores _ Guidelines on dimensions and the limits of surface irregularities Part 8: E-cores 2018 CENELEC 0
763 EN 50342-1/A1 2018 CENELEC 0764 EN 60846_2 2018 CENELEC 0765 EN 61167 2018 CENELEC 0766 EN 61784-5-21 2018 CENELEC 0767 EN IEC 63093-
5 2018 CENELEC 0
768 EN IEC 60512-15-2
Connectors for electrical and electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) -Test 15b: Insert retention in housing (axial)
2018 CENELEC 0
769 EN IEC 61189-2-630
Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 2-630: Testmethods for materials for interconnection structures - Moisture absorption after pressure vessel conditioning
2018 CENELEC 0
770 EN IEC 60793-1-54
Optical fibres - Part 1-54: Measurement methods and test procedures - Gamma irradiation 2018 CENELEC 0
771 EN IEC 61290-4-3
Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output powercontrol
2018 CENELEC 0
772 EN IEC 61340-4-3
Electrostatics Part 4-3: Standard Test Methods for Specific Applications - Footwear 2018 CENELEC 0
773 EN IEC 60068-2-52
Environmental testing - Part 2: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution) 2018 CENELEC 0
774 EN IEC 61076-3-119
Connectors for electrical and electronic equipment - Product requirements - Part 3-119: Rectangular connectors - Detailspecification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrialenvironments for dat
2018 CENELEC 0
775 EN 50291-1 Gas detectors - Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 1: Test methods andperformance requirements
2018 CENELEC 0
776 EN IEC 62613-2
Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-systems) - Part 2: Dimensionalcompatibility and interchangeability requirements for accessories to be used by various types of ships
2018 CENELEC 0
777 EN IEC 60068-3-5
Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance oftemperature chambers
2018 CENELEC 0
778 EN IEC 61204-7
Low-voltage switch mode power supplies - Part 7: Safety requirements 2018 CENELEC 0
779 EN 50173-3 Information technology - Generic cabling systems - Part 3: Industrial spaces 2018 CENELEC 0780 EN IEC 60317-
74Specifications for particular types of winding wires - Part 74: Polyesterimide enamelled rectangular aluminium wire, class180
2018 CENELEC 0
781 CLC/TR 50600-99-1
Information technology - Data centre facilities and infrastructures - Part 99-1: Recommended practices for energymanagement
2018 CENELEC 0
782 EN 50527-2-2 Procedure for the assessment of the exposure to electromagnetic fields of workers bearing active implantable medicaldevices - Part 2-2: Specific assessment for workers with cardioverter defibrillators (ICDs)
2018 CENELEC 0
783 EN IEC 63044-3
Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 3: Electricalsafety requirements
2018 CENELEC 0
784 EN IEC 61058-1
Switches for appliances - Part 1: General requirements 2018 CENELEC 0
785 EN 50174-2 Information technology - Cabling installation - Part 2: Installation planning and practices inside buildings 2018 CENELEC 0786 EN IEC 62677-
2Heat shrinkable low and medium voltage moulded shapes - Part 2 Methods of test 2018 CENELEC 0
787 EN 50364 Product standard for human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 300GHz, used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar applications
2018 CENELEC 0
788 EN IEC 60332-3-23
Tests on electric and optical fibre cables under fire conditions - Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category B
2018 CENELEC 0
789 EN IEC 60512-8-3
Connectors for electrical and electronic equipment - Tests and measurements - Part 8-3: Static load tests (fixed connectors)- Test 8c: Robustness of actuating lever
2018 CENELEC 0
790 EN IEC 62680-1-4
Universal Serial Bus interfaces for data and power - Part 1-4: Common Components - USB Type-C(tm) AuthenticationSpecification
2018 CENELEC 0
791 EN IEC 62485-1
Safety requirements for secondary batteries and battery installations - Part 1: General safety information 2018 CENELEC 0
792 EN IEC 63093-11
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 11: EC-cores for use in power supplyapplications
2018 CENELEC 0
793 EN IEC 60191-1
Mechanical standardization of semiconductor devices - Part 1: General rules for the preparation of outline drawings ofdiscrete devices
2018 CENELEC 0
794 EN IEC 63041-1
Piezoelectric sensors - Part 1: Generic specifications 2018 CENELEC 0
795 EN IEC 60900 Live working - Hand tools for use up to 1 000 V AC and 1 500 V DC 2018 CENELEC 0796 EN 50643 Electrical and electronic household and office equipment - Measurement of networked standby power consumption of edge
equipment2018 CENELEC 0
797 EN IEC 61788-23
Superconductivity - Part 23: Residual resistance ratio measurement - Residual resistance ratio of Nb superconductors 2018 CENELEC 0
798 EN IEC 62820-2
Building intercom systems - Part 2: Requirements for advanced security building intercom systems (ASBIS) 2018 CENELEC 0
799 EN IEC 60404-6
Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powdermaterials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
2018 CENELEC 0
800 EN IEC 60230 Impulse tests on cables and their accessories 2018 CENELEC 0801 EN IEC 61970-
456Energy management system application program interface (EMS-API) - Part 456: Solved power system state profiles 2018 CENELEC 0
802 EN IEC 60794-1-31
Optical fibre cables - Part 1-31: Generic specification - Optical cable elements - Optical fibre ribbon 2018 CENELEC 0
803 EN IEC 61757 Fibre optic sensors - Generic specification 2018 CENELEC 0804 EN 50173-4 Information technology - Generic cabling systems - Part 4: Homes 2018 CENELEC 0805 EN IEC 61938 Multimedia systems - Guide to the recommended characteristics of analogue interfaces to achieve interoperability 2018 CENELEC 0806 EN IEC 61643-
331Components for low-voltage surge protective devices - Part 331: Performance requirements and test methods for metaloxide varistors (MOV)
2018 CENELEC 0
807 EN IEC 62969-1
Semiconductor devices - Semiconductor interface for automotive vehicles - Part 1: General requirements of power interfacefor automotive vehicle sensors
2018 CENELEC 0
808 EN 50640 Household and similar electric appliances - Methods for measuring the performance of clothes washing machines intendedfor commercial use
2018 CENELEC 0
809 EN 50239 Railway applications - Radio remote control system of traction vehicle for shunting application 2018 CENELEC 0810 EN IEC 60099-
8Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission anddistribution lines of a.c. systems above 1 kV
2018 CENELEC 0
811 EN IEC 62610-2
Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC60297 and IEC 60917 series - Part 2: Method for the determination of forced air cooling
2018 CENELEC 0
812 EN IEC 60238 Edison screw lampholders - Incorporates Amendment A1: 2018 2018 CENELEC 0813 EN IEC 62056-
6-2Electricity metering data exchange - The DLMS/COSEM suite - Part 6-2: COSEM interface classes 2018 CENELEC 0
814 EN IEC 62386-217
Digital addressable lighting interface - Part 217: Particular requirements for control gear - Thermal gear protection (devicetype 16)
2018 CENELEC 0
815 EN 50588-2 Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV - Part 2: Transformers withcable boxes on the high-voltage and/or low-voltage side - General requirements for transformers with rated power less thanor equal to 3 15
2018 CENELEC 0
816 EN 50174-1 Information technology - Cabling installation - Part 1: Installation specification and quality assurance 2018 CENELEC 0817 EN IEC 62559-
3Use case methodology - Part 3: Definition of use case template artefacts into an XML serialized format 2018 CENELEC 0
818 EN 50594 Household and similar electric appliances - Methods for measuring the performance of tumble dryers intended forcommercial use
2018 CENELEC 0
819 EN IEC 60942 Electroacoustics - Sound calibrators 2018 CENELEC 0820 EN IEC 60749-
13Semiconductor devices - Mechanical and climatic test methods - Part 13: Salt atmosphere 2018 CENELEC 0
821 EN IEC 62677-3-101
Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 101:Heatshrinkable, polyolefin moulded shapes for low voltage applications
2018 CENELEC 0
822 EN 50321-1 Live working - Footwear for electrical protection - Part 1: Insulating footwear and overboots 2018 CENELEC 0823 EN IEC 62442-
3Energy performance of lamp controlgear - Part 3: Controlgear for tungsten-halogen lamps and LED light sources - Methodof measurement to determine the efficiency of controlgear
2018 CENELEC 0
824 EN IEC 62386-218
Digital addressable lighting interface - Part 218: Particular requirements for control gear - Dimming curve selection (devicetype 17)
2018 CENELEC 0
825 EN IEC 62228-1
Integrated circuits - EMC evaluation of transceivers - Part 1: General conditions and definitions 2018 CENELEC 0
826 EN IEC 60034-27-1
Rotating electrical machines - Part 27-1: Off-line partial discharge measurements on the stator winding insulation ofrotating electrical machines
2018 CENELEC 0
827 EN 63024 Requirements for automatic reclosing devices (ARDs) for circuit-breakers, RCBOs and RCCBs for household and similaruses
2018 CENELEC 0
828 EN IEC 62386-332
Digital addressable lighting interface - Part 332: Particular requirements - Input devices - Feedback 2018 CENELEC 0
829 EN IEC 62386-216
Digital addressable lighting interface - Part 216: Particular requirements for control gear - Load referencing (device type15)
2018 CENELEC 0
830 EN IEC 60598-2-17
Luminaires - Part 2-17: Particular requirements - Luminaires for stage lighting, television and film studios (outdoor andindoor)
2018 CENELEC 0
831 EN IEC 60332-3-24
Tests on electric and optical fibre cables under fire conditions - Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C
2018 CENELEC 0
832 EN IEC 62435-4
Electronic components - Long-term storage of electronic semiconductor devices - Part 4: Storage 2018 CENELEC 0
833 EN IEC 62604-2
Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality - Part 2: Guidelines for the use 2018 CENELEC 0
834 EN IEC 61291-1
Optical amplifiers - Part 1: Generic specification 2018 CENELEC 0
835 EN IEC 62485-4
Safety requirements for secondary batteries and battery installations - Part 4: Valve-regulated lead-acid batteries for use inportable appliances
2018 CENELEC 0
836 EN IEC 60376 Specification of technical grade sulphur hexafluoride (SF6) and complementary gases to be used in its mixtures for use inelectrical equipment
2018 CENELEC 0
837 EN IEC 61837-2
Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal leadconnections - Part 2: Ceramic enclosures
2018 CENELEC 0
838 EN IEC 62246-1-1
Reed switches - Part 1-1: Generic specification - Blank detail specification 2018 CENELEC 0
839 EN 60794-4 Optical fibre cables - Part 4: Sectional specification - Aerial optical cables along electrical power lines 2018 CENELEC 0840 EN IEC 60730-
2-13Automatic electrical controls - Part 2-13: Particular requirements for humidity sensing controls 2018 CENELEC 0
841 EN IEC 60974-1
Arc welding equipment - Part 1: Welding power sources 2018 CENELEC 0
842 EN IEC 60749-12
Semiconductor devices - Mechanical and climatic test methods - Part 12: Vibration, variable frequency 2018 CENELEC 0
843 EN IEC 62969-2
Semiconductor devices - Semiconductor interface for automotive vehicles - Part 2: Efficiency evaluation methods ofwireless power transmission using resonance for automotive vehicles sensors
2018 CENELEC 0
844 EN IEC 61190-1-3
Attachment materials for electronic assembly - Part 1-3: Requirements for electronic grade solder alloys and fluxed andnon-fluxed solid solder for electronic soldering applications
2018 CENELEC 0
845 EN IEC 62282-5-100
Fuel cell technologies - Part 5-100: Portable fuel cell power systems - Safety 2018 CENELEC 0
846 EN IEC 62688 Concentrator photovoltaic (CPV) modules and assemblies - Safety qualification 2018 CENELEC 0847 EN IEC 62442-
1Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determinethe total input power of controlgear circuits and the efficiency of the controlgear
2018 CENELEC 0
848 EN IEC 62343-5-2
Dynamic modules - Part 5-2: Test methods - 1xN fixed-grid WSS - Dynamic crosstalk measurement 2018 CENELEC 0
849 EN IEC 62828-1
Reference conditions and procedures for testing industrial and process measurement transmitters - Part 1: Generalprocedures for all types of transmitters
2018 CENELEC 0
850 EN IEC 62677-3-102
Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 102:Heatshrinkable, polyolefin, anti-tracking moulded shapes for medium voltage applications
2018 CENELEC 0
851 EN IEC 61970-302
Energy management system application program interface (EMS-API) - Part 302: Common information model (CIM)dynamics
2018 CENELEC 0
852 EN IEC 61290-4-4
Optical amplifiers - Test methods - Part 4-4: Gain transient parameters - Single channel optical amplifiers with gain control 2018 CENELEC 0
853 EN IEC 62271-102
High-voltage switchgear and controlgear - Part 102: Alternating current disconnectors and earthing switches 2018 CENELEC 0
854 EN IEC 62386-224
Digital addressable lighting interface - Part 224: Particular requirements for control gear - Non-replaceable light source(device type 23)
2018 CENELEC 0
855 EN 50642 Cable management systems - Test method for content of halogens 2018 CENELEC 0856 EN IEC 60974-
9Arc welding equipment - Part 9: Installation and use 2018 CENELEC 0
857 EN IEC 60332-3-25
Tests on electric and optical fibre cables under fire conditions - Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category D
2018 CENELEC 0
858 EN 50131-2-10 Alarm systems - Intrusion and hold-up systems - Part 2-10: Intrusion detectors - Lock state contacts (magnetic) 2018 CENELEC 0859 EN IEC 60099-
5Surge arresters - Part 5: Selection and application recommendations 2018 CENELEC 0
860 EN IEC 60068-3-6
Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance oftemperature/humidity chambers
2018 CENELEC 0
861 EN IEC 61281-1
Fibre optic communication subsystems - Part 1: Generic specification 2018 CENELEC 0
862 EN IEC 60127-8
Miniature fuses - Part 8: Fuse resistors with particular overcurrent protection 2018 CENELEC 0
863 EN IEC 62677-1
Heat shrinkable low and medium voltage moulded shapes - Part 1: General requirements 2018 CENELEC 0
864 EN IEC 62969-3
Semiconductor devices - Semiconductor interface for automotive vehicles - Part 3: Shock driven piezoelectric energyharvesting for automotive vehicle sensors
2018 CENELEC 0
865 EN IEC 61204-3
Low-voltage switch mode power supplies - Part 3: Electromagnetic compatibility (EMC) 2018 CENELEC 0
866 EN IEC 62684 Interoperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones 2018 CENELEC 0867 EN IEC 60519-
12Safety in installations for electroheating and electromagnetic processing - Part 12: Particular requirements for infraredelectroheating
2018 CENELEC 0
868 EN IEC 62928 Railway applications - Rolling stock - Onboard lithium-ion traction batteries 2018 CENELEC 0869 EN IEC 60721-
2-7Classification of environmental conditions - Part 2: Environmental conditions appearing in nature - Fauna and flora 2018 CENELEC 0
870 EN IEC 61968-3
Application integration at electric utilities - System interfaces for distribution management - Part 3: Interface for networkoperations
2018 CENELEC 0
871 EN 60350-2 Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance 2018 CENELEC 0872 EN IEC 62576 Electric double-layer capacitors for use in hybrid electric vehicles - Test methods for electrical characteristics 2018 CENELEC 0873 EN IEC 62443-
4-1Security for industrial automation and control systems - Part 4-1: Secure product development lifecycle requirements 2018 CENELEC 0
874 CEN/TR 17244 Water quality - Technical report for the management of diatom barcodes 2018 CENELEC 0875 EN IEC 62439-
3Industrial communication networks - High availability automation networks - Part 3: Parallel Redundancy Protocol (PRP)and High-availability Seamless Redundancy (HSR)
2018 CENELEC 0
876 EN IEC 60749-26
Semiconductor devices - Mechanical and climatic test methods - Part 26: Electrostatic discharge (ESD) sensitivity testing -Human body model (HBM)
2018 CENELEC 0
877 EN IEC 61010-2-120
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-120: Particular safetyrequirements for machinery aspects of equipment
2018 CENELEC 0
878 EN IEC 60721-3-1
Classification of environmental conditions - Part 3-1: Classification of groups of environmental parameters and theirseverities - Storage
2018 CENELEC 0
879 EN IEC 62386-207
Digital addressable lighting interface - Part 207: Particular requirements for control gear - LED modules (device type 6) 2018 CENELEC 0
880 EN IEC 61788-24
Superconductivity - Part 24: Critical current measurement - Retained critical current after double bending at roomtemperature of Ag-sheathed Bi-2223 superconducting wires
2018 CENELEC 0
881 EN 50556 Road traffic signal systems 2018 CENELEC 0882 EN IEC 61249-
2-46Materials for printed boards and other interconnecting structures - Part 2-46: Reinforced base materials clad and unclad -Nonhalogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity (1.5W/m K) anddefined flammabilit
2018 CENELEC 0
883 EN IEC 62933-2-1
Electrical energy storage (EES) systems - Part 2-1: Unit parameters and testing methods - General specification 2018 CENELEC 0
884 EN IEC 61987-92
Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 92: Listsof properties (LOP) of measuring equipment for electronic data exchange - Aspect LOPs
2018 CENELEC 0
885 EN IEC 62325-451-6
Framework for energy market communications - Part 451-6: Publication of information on market, contextual andassembly models for European-style markets
2018 CENELEC 0
886 EN IEC 62828-2
Reference conditions and procedures for testing industrial and process measurement transmitters - Part 2: Specificprocedures for pressure transmitters
2018 CENELEC 0
887 EN 50562 Railway applications - Fixed installations - Process, protective measures and demonstration of safety for electric tractionsystems
2018 CENELEC 0
888 EN 50107-3 Product standard covering luminous signs with discharge lamps and/or LED (light emitting diodes) and/or EL(electroluminescent) lightsources with a nominal voltage not exceeding 1000 V, with the exclusion of general lighting,traffic- or emergency related
2018 CENELEC 0
889 EN 50271 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements andtests for apparatus using software and/or digital technologies
2018 CENELEC 0
890 EN IEC 63041-2
Piezoelectric sensors - Part 2: chemical and biochemical sensors 2018 CENELEC 0
891 EN 50173-2 Information technology - Generic cabling systems - Part 2: Office spaces 2018 CENELEC 0892 EN IEC 62439-
5Industrial communication networks - High availability automation networks - Part 5: Beacon Redundancy Protocol (BRP) 2018 CENELEC 0
893 EN 60793-1-47 Optical fibres - Part 1-47: Measurement methods and test procedures - Macrobending loss 2018 CENELEC 0894 EN IEC 60404-
8-11Magnetic materials - Part 8-11: Specifications for individual materials - Fe-based amorphous strip delivered in the semi-processed state
2018 CENELEC 0
895 EN IEC 61265 Electroacoustics - Instruments for measurement of aircraft noise - Performance requirements for systems to measure soundpressure levels in noise certification of aircraft
2018 CENELEC 0
896 EN IEC 61755-6-2
Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 6-2: Connection of 50m core diameter multimode physically contacting fibres - Nonangled for reference connector application, at wavelength_خof 850 nm using
2018 CENELEC 0
897 EN IEC 62148-1
Fibre optic active components and devices - Package and interface standards - Part 1: General and guidance 2018 CENELEC 0
898 EN IEC 62884-3
Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 3: Frequency aging test methods 2018 CENELEC 0
899 EN IEC 62343-3-4
Dynamic modules - Part 3-4: Performance specification templates - Multicast optical switches 2018 CENELEC 0
900 EN IEC 62561-6
Lightning protection system components (LPSC) - Part 6: Requirements for lightning strike counters (LSC) 2018 CENELEC 0
901 EN IEC 61800-3
Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods 2018 CENELEC 0
902 EN IEC 62853 Open systems dependability 2018 CENELEC 0903 EN IEC 62793 Protection against lightning - Thunderstorm warning systems 2018 CENELEC 0904 EN IEC/IEEE
65700Bushings for DC application 2018 CENELEC 0
905 CLC/TS 50134-9
Alarm systems - Social alarm systems - Part 9: IP Communications Protocol 2018 CENELEC 0
906 EN IEC 62046 Safety of machinery - Application of protective equipment to detect the presence of persons 2018 CENELEC 0907 EN IEC 60034-
4-1Rotating electrical machines - Part 4-1: Methods for determining electrically excited synchronous machine quantities fromtests
2018 CENELEC 0
908 EN IEC 60810 Lamps, light sources and led packages for road vehicles - Performance requirements 2018 CENELEC 0909 EN 50588-4 Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV - Part 4: Transformers with
cable boxes on the high-voltage and/or low-voltage side - Cable boxes type 2 for use on transformers meeting therequirements of EN 50588-2
2018 CENELEC 0
910 EN IEC 62325-301
Framework for energy market communications - Part 301: Common information model (CIM) extensions for markets 2018 CENELEC 0
911 EN IEC 62386-221
Digital addressable lighting interface - Part 221: Particular requirements for control gear - Demand Response (device type20)
2018 CENELEC 0
912 EN 60846â__2 Radiation protection instrumentation Ambient and/ or directional dose equivalent (rate) meters and/or monitors for beta, Xand gamma radiation Part 2: High range beta and photon dose and dose rate portable instruments for emergency radiationprotection pu
2018 CENELEC 0
913 EN 60794-1-22 Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods 2018 CENELEC 0914 EN 62841-2-1 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular
requirements for hand-held drills and impact drills2018 CENELEC 0
915 EN IEC 61249-2-47
Materials for printed boards and other interconnecting structures - Part 2-47: Reinforced base materials clad and unclad -Nonhalogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity (2.0W/m K) anddefined flammabilit
2018 CENELEC 0
916 EN IEC 62667 Medical electrical equipment - Medical light ion beam equipment - Performance characteristics 2018 CENELEC 0917 EN IEC 62822-
1Electric welding equipment - Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300GHz) - Part 1: Product family standard
2018 CENELEC 0
918 EN IEC 60068-2-5
Environmental testing - Part 2-5: Tests - Test S: Simulated solar radiation at ground level and guidance for solar radiationtesting and weathering
2018 CENELEC 0
919 EN IEC 60079-0
Explosive atmospheres - Part 0: Equipment - General requirements 2018 CENELEC 0
920 CLC/TR 50682 Consideration on the use of OTDRs to measure return loss of single-mode optical fibre connections 2018 CENELEC 0921 EN IEC 62442-
2Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge lamps (excluding fluorescentlamps) - Method of measurement to determine the efficiency of controlgear
2018 CENELEC 0
922 CLC/TS 50083-2-3
Cable networks for television signals, sound Signals and interactive services - Part 2-3: LTE (4G) Interference MitigationFilters
2018 CENELEC 0
923 EN IEC 60370 Test procedure for thermal endurance of insulating resins and varnishes for impregnation purposes - Electric breakdownmethods
2018 CENELEC 0
924 EN IEC 60332-3-10
Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus
2018 CENELEC 0
925 EN IEC 60051-5
Direct acting indicating analogue electrical measuring instruments and their accessories - Part 5: Special requirements forphase meters, power factor meters and synchroscopes
2018 CENELEC 0
926 EN IEC 62631-3-11
Dielectric and resistive properties of solid insulating materials - Part 3-11: Determination of resistive properties (DCmethods) - Volume resistance and volume resistivity - Method for impregnation and coating materials
2018 CENELEC 0
927 EN IEC 62933-1
Electrical Energy Storage (EES) systems - Part 1: Vocabulary 2018 CENELEC 0
928 EN IEC 60384-26
Fixed capacitors for use in electronic equipment - Part 26: Sectional specification - Fixed aluminium electrolytic capacitorswith conductive polymer solid electrolyte
2018 CENELEC 0
929 EN IEC 62680-1-3
Universal serial bus interfaces for data and power - Part 1-3: Common components - USB Type-CTM Cable and ConnectorSpecification
2018 CENELEC 0
930 EN 50588-3 Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV - Part 3: Transformers withcable boxes on the high-voltage and/or low-voltage side - Cable boxes type 1 for use on transformers meeting therequirements of EN 50588-2
2018 CENELEC 0
931 EN IEC 61162-450
Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 450: Multiple talkers andmultiple listeners - Ethernet interconnection
2018 CENELEC 0
932 EN 50173-1 Information technology - Generic cabling systems - Part 1: General requireme 2018 CENELEC 0933 EN IEC 62040-
2Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements 2018 CENELEC 0
934 EN IEC 62561-7
Lightning protection system components (LPSC) - Part 7: Requirements for earthing enhancing compounds 2018 CENELEC 0
935 EN 50377-14-1 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -Part 14-1: Simplex and duplex cords made from simplex plugs with cylindrical ferrules, using EN 60793 2 50 single-modeB1 or B6 fibre f
2018 CENELEC 0
936 EN IEC 61804-2
Function blocks (FB) for process control and electronic device description language (EDDL) - Part 2: Specification of FBconcept
2018 CENELEC 0
937 EN 50496 Determination of workers exposure to electromagnetic fields and assessment of risk at a broadcast site 2018 CENELEC 0938 EN IEC 61730-
2Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing 2018 CENELEC 0
939 EN IEC 62024-1
High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chipinductor
2018 CENELEC 0
940 EN IEC 61754-7-2
Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7-2: Type MPOconnector family - Two fibre rows
2018 CENELEC 0
941 CLC/TR 50442 Guidelines for product committees on the preparation of standards related to human exposure from electromagnetic fields 2018 CENELEC 0942 EN IEC 62631-
2-1Dielectric and resistive properties of solid insulating materials - Part 2-1: Relative permittivity and dissipation factor -Technical frequencies (0,1 Hz to 10 MHz) - AC Methods
2018 CENELEC 0
943 EN IEC 61076-2-111
Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detailspecification for power connectors with M12 screw-locking
2018 CENELEC 0
944 EN IEC 62386-222
Digital addressable lighting interface - Part 222: Particular requirements for control gear - Thermal lamp protection (devicetype 21)
2018 CENELEC 0
945 EN IEC 61340-4-4
Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediatebulk containers (FIBC)
2018 CENELEC 0
946 CLC/TR 50600-99-2
Information technology - Data centre facilities and infrastructures - Part 99-2: Recommended practices for environmentalsustainability
2018 CENELEC 0
947 CLC/TS 50654-1
HVDC Grid Systems and connected Converter Stations - Guideline and Parameter Lists for Functional Specifications - Part1: Guidelines
2018 CENELEC 0
948 EN IEC 62969-4
Semiconductor devices - Semiconductor interface for automotive vehicles - Part 4: Evaluation method of data interface forautomotive vehicle sensors
2018 CENELEC 0
949 EN IEC 62477-2
Safety requirements for power electronic converter systems and equipment - Part 2: Power electronic converters from 1 000V AC or 1 500 V DC up to 36 kV AC or 54 kV DC
2018 CENELEC 0
950 EN 60669-1 Switches for household and similar fixed electrical installations - Part 1: General requirements 2018 CENELEC 0
951 EN IEC 60404-16
Magnetic materials - Part 16: Methods of measurement of the magnetic properties of Fe-based amorphous strip by means ofa single sheet tester
2018 CENELEC 0
952 EN IEC 62820-3-1
Building intercom systems - Part 3-1: Application guidelines - General 2018 CENELEC 0
953 EN 50173-5 Information technology - Generic cabling systems - Part 5: Data centre spaces 2018 CENELEC 0954 EN IEC 62680-
1-2Universal Serial Bus interfaces for data and power - Part 1-2: Common components - USB Power Delivery Specification 2018 CENELEC 0
955 EN IEC 60268-3
Sound system equipment - Part 3: Amplifiers 2018 CENELEC 0
956 EN IEC 61249-2-45
Materials for printed boards and other interconnecting structures - Part 2-45: Reinforced base materials clad and unclad -Nonhalogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity (1.0W/m K) anddefined flammabilit
2018 CENELEC 0
957 EN IEC 60051-6
Direct acting indicating analogue electrical measuring instruments and their accessories - Part 6: Special requirements forohmmeters (impedance meters) and conductance meters
2018 CENELEC 0
958 CLC/TR 50542-1
Railway applications - Drivers cab train display controller (TDC) - Part 1: General architecture 2018 CENELEC 0
959 EN IEC 62676-5
Video surveillance systems for use in security applications - Part 5: Data specifications and image quality performance forcamera devices
2018 CENELEC 0
960 EN IEC 60051-8
Direct acting indicating analogue electrical measuring instruments and their accessories - Part 8: Special requirements foraccessories
2018 CENELEC 0
961 EN IEC 62271-110
High-voltage switchgear and controlgear - Part 110: Inductive load switching 2018 CENELEC 0
962 EN IEC 61643-352
Components for low-voltage surge protection - Part 352: Selection and application principles for telecommunications andsignalling network surge isolation transformers (SITs)
2018 CENELEC 0
963 EN IEC 63093-7
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 7: EER-cores 2018 CENELEC 0
964 EN IEC 61162-460
Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 460: Multiple talkers andmultiple listeners - Ethernet interconnection - Safety and security
2018 CENELEC 0
965 EN IEC 62613-1
Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-Systems) - Part 1: Generalrequirements
2018 CENELEC 0
966 EN IEC 61340-4-5
Electrostatics - Part 4-5: Standard test methods for specific applications - Methods for characterizing the electrostaticprotection of footwear and flooring in combination with a person
2018 CENELEC 0
967 EN IEC 61730-1
Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction 2018 CENELEC 0
968 EN IEC 60071-2
Insulation co-ordination - Part 2: Application guidelines 2018 CENELEC 0
969 EN IEC 60601-2-2
Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of highfrequency surgical equipment and high frequency surgical accessories
2018 CENELEC 0
970 EN IEC 60034-27-4
Rotating electrical machines - Part 27-4: Measurement of insulation resistance and polarization index on winding insulationof rotating electrical machines
2018 CENELEC 0
971 EN 60204-1 Safety of machinery - Electrical equipment of machines - Part 1: General requirements 2018 CENELEC 0972 EN IEC 60317-
73Specifications for particular types of winding wires - Part 73: Polyester or polyesterimide overcoated with polyamide-imideenamelled rectangular aluminium wire, class 200
2018 CENELEC 0
973 EN IEC 80601-2-71
Medical electrical equipment - Part 2-71: Particular requirements for the basic safety and essential performance offunctional near-infrared spectroscopy (NIRS) equipment
2018 CENELEC 0
974 EN IEC 61869-10
Instrument transformers - Part 10: Additional requirements for low-power passive current transformers 2018 CENELEC 0
975 EN IEC 62731 Text-to-speech for television - General requirements 2018 CENELEC 0
976 CLC/TR 50600-99-3
Information technology - Data centre facilities and infrastructures - Part 99-3: Guidance to the application of EN 50600series
2018 CENELEC 0
977 EN IEC 60695-6-2
Fire hazard testing - Part 6-2: Smoke obscuration - Summary and relevance of test methods 2018 CENELEC 0
978 EN IEC 60793-1-45
Optical fibres - Part 1-45: Measurement methods and test procedures - Mode field diameter 2018 CENELEC 0
979 EN IEC 60728-3
Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for cablenetworks (TA 5)
2018 CENELEC 0
980 CLC/TS 50654-2
HVDC Grid Systems and connected Converter Stations - Guideline and Parameter Lists for Functional Specifications - Part2: Parameter Lists
2018 CENELEC 0
981 EN 50059 Electrostatic hand-held spraying equipment - Safety requirements - Hand-held spraying equipment for non-ignitablecoating materials
2018 CENELEC 0
982 EN 50491-12-1 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems(BACS) - Smart grid - Application specification - Interface and framework for customer - Part 12-1: Interface between theCEM and Home/Buildin
2018 CENELEC 0
983 EN IEC 60721-3-2
Classification of environmental conditions - Part 3-2: Classification of groups of environmental parameters and theirseverities - Transportation and Handling
2018 CENELEC 0
984 EN IEC 61010-2-201
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201: Particularrequirements for control equipment
2018 CENELEC 0
985 EN IEC 60812 Failure modes and effects analysis (FMEA and FMECA) 2018 CENELEC 0986 EN IEC 61347-
2-14Lamp controlgear - Part 2-14: Particular requirements for DC and/or AC supplied electronic controlgear for fluorescentinduction lamps
2018 CENELEC 0
987 EN IEC 62828-3
Reference conditions and procedures for testing industrial and process measurement transmitters - Part 3: Specificprocedures for temperature transmitters
2018 CENELEC 0
988 EN IEC 62386-333
Digital addressable lighting interface - Part 333: Particular requirements for control devices - Manual configuration (featuretype 33)
2018 CENELEC 0
989 EN IEC 62714-1
Engineering data exchange format for use in industrial automation systems engineering - Automation markup language -Part 1: Architecture and general requirements
2018 CENELEC 0
990 EN IEC 62820-3-2
Building intercom systems - Part 3-2: Application guidelines - Advanced security building intercom systems (ASBIS) 2018 CENELEC 0
991 EN 50173-6 Information technology - Generic cabling systems - Part 6: Distributed building services 2018 CENELEC 0992 EN IEC 62561-
2Lightning protection system components (LPSC) - PART 2: Requirements for conductors and earth electrodes 2018 CENELEC 0
993 EN IEC 60051-7
Direct acting indicating analogue electrical measuring instruments and their accessories - Part 7: Special requirements formulti-function instruments
2018 CENELEC 0
994 EN IEC 62822-3
Electric welding equipment - Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300Hz) - Part 3: Resistance welding equipment
2018 CENELEC 0
995 EN IEC 60332-3-22
Tests on electric and optical fibre cables under fire conditions - Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A
2018 CENELEC 0
996 EN IEC 60286-5
Packaging of components for automatic handling - Part 5: Matrix trays 2018 CENELEC 0
997 EN IEC 61125 Insulating liquids - Test methods for oxidation stability - Test method for evaluating the oxidation stability of insulatingliquids in the delivered state
2018 CENELEC 0
998 EN 50398-1 Alarm systems - Combined and integrated alarm systems - Part 1: General requirements 2017 CENELEC 0999 EN 61215-1-2 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-2: Special requirements for testing
of thin-film Cadmium Telluride (CdTe) based photovoltaic (PV) modules2017 CENELEC 0
1000 EN 61970-301 Energy management system application program interface (EMS-API) - Part 301: Common information model (CIM) base 2017 CENELEC 01001 EN 62561-3 Lightning Protection System Components (LPSC) - Part 3: Requirements for isolating spark gaps (ISG) 2017 CENELEC 0
1002 EN 60137 Insulated bushings for alternating voltages above 1 000 V 2017 CENELEC 01003 EN 60286-1 Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous
tapes2017 CENELEC 0
1004 EN 60068-2-69 Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing of electronic components and printed boards bythe wetting balance (force measurement) method
2017 CENELEC 0
1005 EN 50632-3-3 Electric motor-operated tools - Dust measurement procedure - Part 3-3: Particular requirements for transportable planersand thicknessers
2017 CENELEC 0
1006 CLC/TS 61400-14
Wind turbines - Part 14: Declaration of apparent sound power level and tonality values 2017 CENELEC 0
1007 EN 62943 Visible light beacon system for multimedia applications 2017 CENELEC 01008 EN 50401 Product standard to demonstrate the compliance of base station equipment with radiofrequency electromagnetic field
exposure limits (110 MHz - 100 GHz), when put into service2017 CENELEC 0
1009 EN 60300-3-3 Dependability management - Part 3-3: Application guide - Life cycle costing 2017 CENELEC 01010 EN 60904-1-1 Photovoltaic devices - Part 1-1: Measurement of current-voltage characteristics of multi-junction photovoltaic (PV) devices 2017 CENELEC 01011 EN 61202-1 Fibre optic interconnecting devices and passive components - Fibre optic isolators - Part 1: Generic specification 2017 CENELEC 01012 EN 61360-1 Standard data element types with associated classification scheme - Part 1: Definitions - Principles and methods 2017 CENELEC 01013 EN 50663 Generic standard for assessment of low power electronic and electrical equipment related to human exposure restrictions
for electromagnetic fields (10 MHz - 300 GHz)2017 CENELEC 0
1014 EN 60317-72 Specifications for particular types of winding wires - Part 72: Polyester glass-fibre wound fused, silicone resin or varnishimpregnated, bare or enamelled round copper wire, temperature index 200
2017 CENELEC 0
1015 EN 62351-9 Power systems management and associated information exchange - Data and communications security - Part 9: Cybersecurity key management for power system equipment
2017 CENELEC 0
1016 EN 62211 Inductive components Reliability management 2017 CENELEC 01017 EN 61184 Bayonet lampholders 2017 CENELEC 01018 EN 55014-1 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1:
Emission2017 CENELEC 0
1019 EN 60904-8-1 Photovoltaic devices - Part 8-1: Measurement of spectral responsivity of multi-junction photovoltaic (PV) devices 2017 CENELEC 01020 EN 50289-1-9 Communication cables - Specifications for test methods - Part 1-9: Electrical test methods - Unbalance attenuation
(transverse conversion loss TCL transverse conversion transfer loss TCTL)2017 CENELEC 0
1021 EN 61340-4-7 Electrostatics - Part 4-7: Standard test methods for specific applications - Ionization 2017 CENELEC 01022 EN 61757-1-1 Fibre optic sensors - Part 1-1: Strain measurement - Strain sensors based on fibre Bragg gratings 2017 CENELEC 01023 EN 62683-1 Low-voltage switchgear and controlgear - Product data and properties for information exchange - Part 1: Catalogue data 2017 CENELEC 01024 EN 50463-3 Railway applications - Energy measurement on board trains - Part 3: Data handling 2017 CENELEC 01025 EN 60838-1 Miscellaneous lampholders - Part 1: General requirements and tests - Incorporates Amendment A1: 2017 2017 CENELEC 01026 EN 50625-2-4 Collection, logistics & treatment requirements for WEEE - Part 2- 4: Treatment requirements for photovoltaic panels 2017 CENELEC 01027 EN 62561-5 Lightning protection system components (LPSC) - Part 5: Requirements for earth electrode inspection housings and earth
electrode seals2017 CENELEC 0
1028 EN 62325-451-4
Framework for energy market communications - Part 451-4: Settlement and reconciliation business process, contextual andassembly models for European market
2017 CENELEC 0
1029 EN 61400-12-1 Wind power generation systems - Part 12-1: Power performance measurement of electricity producing wind turbines 2017 CENELEC 01030 EN 60205 Calculation of the effective parameters of magnetic piece parts 2017 CENELEC 01031 EN 61987-11 Industrial-process measurement and control - Data structures and elements in -process equipment catalogues - Part 11: Lists
of properties (LOPs) of measuring equipment for electronic data exchange - Generic structures2017 CENELEC 0
1032 EN 62435-1 Electronic components - Long-term storage of electronic semiconductor devices - Part 1: General 2017 CENELEC 01033 EN 63005-1 Event video data recorder for road vehicle accidents - Part 1: Basic requirements 2017 CENELEC 0
1034 EN 60051-1 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1: Definitions and generalrequirements common to all parts
2017 CENELEC 0
1035 EN 55025 Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurementfor the protection of on-board receivers
2017 CENELEC 0
1036 EN 62827-2 Wireless power transfer - Management - Part 2: Multiple device control management 2017 CENELEC 01037 EN 50124-2 Railway applications - Insulation coordination - Part 2: Overvoltages and related protection 2017 CENELEC 01038 EN 61010-2-
020Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particularrequirements for laboratory centrifuges
2017 CENELEC 0
1039 EN 60034-18-42
Rotating electrical machines - Part 18-42: Partial discharge resistant electrical insulation systems (Type II) used in rotatingelectrical machines fed from voltage converters - Qualification tests
2017 CENELEC 0
1040 EN 50341-2-6 Overhead electrical lines exceeding AC 1 kV - Part 2-6: National Normative Aspects (NNA) for SPAIN 2017 CENELEC 01041 EN 62949 Particular safety requirements for equipment to be connected to information and communication networks 2017 CENELEC 01042 EN 60154-4 Flanges for waveguides - Part 4: Relevant specifications for flanges for circular waveguides 2017 CENELEC 01043 EN 62657-2 Industrial communication networks - Wireless communication networks - Part 2: Coexistence management 2017 CENELEC 01044 EN 60947-2 Low-voltage switchgear and controlgear - Part 2: Circuit-breakers 2017 CENELEC 01045 EN 62090 Product package labels for electronic components using bar code and two- dimensional symbologies 2017 CENELEC 01046 EN 60317-71 Specifications for particular types of winding wires - Part 71: Polyester glass-fibre wound fused and resin or varnish
impregnated, bare or enamelled round copper wire, temperature index 1802017 CENELEC 0
1047 EN 50134-2 Alarm systems - Social alarm systems - Part 2: Trigger devices 2017 CENELEC 01048 EN 60794-2 Optical fibre cables - Part 2: Indoor cables - Sectional specification 2017 CENELEC 01049 EN 62133-2 Secondary cells and batteries containing alkaline or other nonacid electrolytes - Safety requirements for portable sealed
secondary cells, and for batteries made from them, for use in portable applications - Part 2: Lithium systems2017 CENELEC 0
1050 EN 60079-30-1 Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements 2017 CENELEC 01051 EN 61010-2-
101Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-101: Particularrequirements for in vitro diagnostic (IVD) medical equipment
2017 CENELEC 0
1052 EN 61987-15 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 15: Listsof properties (LOPs) for level measuring equipment for electronic data exchange
2017 CENELEC 0
1053 EN 50289-1-1 Communication cables - Specifications for test methods - Part 1- 1: Electrical test methods - General requirements 2017 CENELEC 01054 EN 50341-2-8 Overhead electrical lines exceeding AC 1 kV - Part 2-8: National Normative Aspects (NNA) for France (based on EN
50341- 1:2012)2017 CENELEC 0
1055 EN 61851-21-1 Electric vehicle conductive charging system - Part 21-1: Electric vehicle on-board charger EMC requirements forconductive connection to an AC/DC supply
2017 CENELEC 0
1056 EN 63035 MIDI (Musical Instrument Digital Interface) specification 1.0 (Abridged edition, 2015) 2017 CENELEC 01057 EN 62282-6-
200Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods 2017 CENELEC 0
1058 EN 50566 Product standard to demonstrate the compliance of wireless communication devices with the basic restrictions and exposurelimit values related to human exposure to electromagnetic fields in the frequency range from 30 MHz to 6 GHz: hand-heldand body moun
2017 CENELEC 0
1059 EN 60034-12 Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors 2017 CENELEC 01060 EN 60855-1 Live working - Insulating foam-filled tubes and solid rods - Part 1: Tubes and rods of a circular cross-section 2017 CENELEC 01061 EN 50402 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen -
Requirements on the functional safety of gas detection systems2017 CENELEC 0
1062 EN 62325-451-1
Framework for energy market communications - Part 451-1: Acknowledgement business process and contextual model forCIM European market
2017 CENELEC 0
1063 EN 50180-3/A1 Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 3: Requirements forbushing fixations
2017 CENELEC 0
1064 CLC/TS 50131-2-11
Alarm systems - Intrusion and hold-up systems - Part 2-11: Intrusion detectors - ALDDR 2017 CENELEC 0
1065 EN 60695-11-2 Fire hazard testing - Part 11-2: Test flames - 1 kW nominal pre-mixed flame - Apparatus, confirmatory test arrangementand guidance
2017 CENELEC 0
1066 EN 62282-3-201
Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell powersystems
2017 CENELEC 0
1067 EN 50463-1 Railway applications - Energy measurement on board trains - Part 1: General 2017 CENELEC 01068 EN 61587-1 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental
requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor condition use andtransportation
2017 CENELEC 0
1069 EN 60317-56 Specifications for particular types of winding wires - Part 56: Solderable fully insulated (FIW) zero-defect polyurethaneenamelled round copper wire, class 180
2017 CENELEC 0
1070 EN 61511-2 Functional safety - Safety instrumented systems for the process industry sector - Part 2: Guidelines for the application ofIEC 61511-1
2017 CENELEC 0
1071 EN 60794-2-22 Optical fibre cables - Part 2-22: Indoor cables - Detail specification for multi-simplex breakout optical cables to beterminated with connectors
2017 CENELEC 0
1072 EN 61400-25-1 Wind energy generation systems - Part 25-1: Communications for monitoring and control of wind power plants - Overalldescription of principles and models
2017 CENELEC 0
1073 EN 60793-2-10 Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres 2017 CENELEC 01074 EN 62351-7 Power systems management and associated information exchange - Data and communications security - Part 7: Network
and System Management (NSM) data object models2017 CENELEC 0
1075 EN 62321-7-2 Determination of certain substances in electrotechnical products - Part 7-2: Hexavalent chromium - Determination ofhexavalent chromium (Cr(VI)) in polymers and electronics by the colorimetric method
2017 CENELEC 0
1076 EN 61010-2-011
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-011: Particularrequirements for refrigerating equipment
2017 CENELEC 0
1077 EN 60695-8-2 Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods 2017 CENELEC 01078 EN 50664 Generic standard to demonstrate the compliance of equipment used by workers with limits on exposure to electromagnetic
fields (0 Hz - 300 GHz), when put into service or in situ2017 CENELEC 0
1079 EN 62386-301 Digital addressable lighting interface - Part 301: Particular requirements - Input devices - Push buttons 2017 CENELEC 01080 EN 62827-3 Wireless power transfer - Management - Part 3: Multiple source control management 2017 CENELEC 01081 EN 60728-101 Cable networks for television signals, sound signals and interactive services - Part 101: System performance of forward
paths loaded with digital channels only2017 CENELEC 0
1082 EN 50124-1 Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for allelectrical and electronic equipment
2017 CENELEC 0
1083 EN 61215-1-4 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-4: Special requirements for testingof thin-film Cu(In,GA)(S,Se)2 based photovoltaic (PV) modules
2017 CENELEC 0
1084 EN 62561-1 Lightning Protection System Components (LPSC) - Part 1: Requirements for connection components 2017 CENELEC 01085 EN 61215-2 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 2: Test procedures 2017 CENELEC 01086 EN 62056-7-3 Electricity metering data exchange - The DLMS/COSEM suite - Part 7-3: Wired and wireless M-Bus communication
profiles for local and neighbourhood networks2017 CENELEC 0
1087 EN 61057 Live working - Insulating aerial devices for mounting on a chassis 2017 CENELEC 01088 EN 62550 Spare parts provisioning 2017 CENELEC 01089 EN 62766-2-2 Consumer terminal function for access to IPTV and open internet multimedia services - Part 2-2: HTTP adaptive streaming 2017 CENELEC 01090 EN 60793-1-48 Optical fibres - Part 1-48: Measurement methods and test procedures - Polarization mode Dispersion 2017 CENELEC 01091 CLC/TS 50136-
9Alarm systems - Alarm transmission systems and equipment - Part 9: Requirements for common protocol for alarmtransmission using the Internet Protocol (IP)
2017 CENELEC 0
1092 EN 61709 Electric components - Reliability - Reference conditions for failure rates and stress models for conversion 2017 CENELEC 01093 EN 50360 Product standard to demonstrate the compliance of wireless communication devices, with the basic restrictions and
exposure limit values related to human exposure to electromagnetic fields in the frequency range from 300 MHz to 6 GHz:devices used next to
2017 CENELEC 0
1094 EN 61332 Soft ferrite material classification 2017 CENELEC 01095 EN 62863 Methods of measuring performances of electric hair clippers or trimmers for household use 2017 CENELEC 01096 EN 62343 Dynamic modules - General and guidance 2017 CENELEC 01097 EN 62586-2 Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements 2017 CENELEC 01098 EN 62433-3 EMC IC modelling - Part 3: Models of Integrated Circuits for EMI behavioural simulation - Radiated emissions modelling
(ICEMRE)2017 CENELEC 0
1099 EN 50289-1-8 Communication cables - Specifications for test methods - Part 1- 8: Electrical test methods - Attenuation 2017 CENELEC 01100 EN 60404-8-6 Magnetic materials - Part 8-6: Specifications for individual materials - Soft magnetic metallic materials 2017 CENELEC 01101 EN 63029 Audio, video and multimedia systems and equipment - Multimedia e-publishing and e-book technologies - Rastergraphics
image-based e-books2017 CENELEC 0
1102 EN 62884-2 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 2: Phase jitter measurement method 2017 CENELEC 01103 EN 62271-212 High-voltage switchgear and controlgear - Part 212: Compact Equipment Assembly for Distribution Substation (CEADS) 2017 CENELEC 01104 EN 50131-5-3 Alarm systems - Intrusion systems - Part 5-3: Requirements for interconnections equipment using radio frequency
techniques2017 CENELEC 0
1105 EN 50593 Electric dishwashers for commercial use - Test methods for measuring the performance 2017 CENELEC 01106 EN 50341-2-
13/AMDOverhead electrical lines exceeding AC 1 kV - Part 2-13: National Normative Aspects (NNA) for ITALY 2017 CENELEC 0
1107 EN 62133-1 Secondary cells and batteries containing alkaline or other nonacid electrolytes - Safety requirements for portable sealedsecondary cells, and for batteries made from them, for use in portable applications - Part 1: Nickel systems
2017 CENELEC 0
1108 EN 60695-11-5 Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement andguidance
2017 CENELEC 0
1109 EN 62320-2 Maritime navigation and radiocommunication equipment and systems - Automatic identification system (AIS) - Part 2: AISAtoN Stations - Operational and performance requirements, methods of testing and required test results
2017 CENELEC 0
1110 EN 63028 Wireless Power Transfer - AirFuel Resonant Baseline System Specification (BSS) 2017 CENELEC 01111 EN 61757-2-2 Fibre optic sensors - Part 2-2: Temperature measurement - Distributed sensing 2017 CENELEC 01112 EN 62433-2 EMC IC modelling - Part 2: Models of integrated circuits for EMI behavioural simulation - Conducted emissions modelling
(ICEM-CE)2017 CENELEC 0
1113 EN 62282-4-102
Fuel cell technologies - Part 4-102: Fuel cell power systems for industrial electric trucks - Performance test methods 2017 CENELEC 0
1114 CLC/TS 50625-4
Collection, logistics & treatment requirements for WEEE - Part 4: Specification for the collection and logisticsassociated with WEEE
2017 CENELEC 0
1115 EN 61784-3-8 Industrial communication networks - Profiles - Part 3-8: Functional safety fieldbuses - Additional specifications for CPF 8 2017 CENELEC 01116 EN 61511-1 Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system,
hardware and application programming Requirements2017 CENELEC 0
1117 EN 62974-1 Monitoring and measuring systems used for data collection, gathering and analysis - Part 1: Device requirements 2017 CENELEC 01118 EN 60704-2-13 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-13:
Particular requirements for range hoods and other cooking fume extractors2017 CENELEC 0
1119 EN 62056-8-5 Electricity metering data exchange - The DLMS/COSEM suite - Part 8-5: Narrow-band OFDM G3-PLC communicationprofile for neighbourhood networks
2017 CENELEC 0
1120 EN 50126-2 Railway Applications - The Specification and Demonstration of Reliability, Availability, Maintainability and Safety(RAMS) - Part 2: Systems Approach to Safety
2017 CENELEC 0
1121 EN 60077-2 Railway applications - Electric equipment for rolling stock - Part 2: Electrotechnical components - General rules 2017 CENELEC 0
1122 CLC/TS 50625-3-3
Collection, logistics & treatment requirements for WEEE - Part 3- 3: Specification for de-pollution - WEEEcontaining CRTs and flat panel displays
2017 CENELEC 0
1123 EN 50341-2-13 Overhead electrical lines exceeding AC 1 kV - Part 2-13: National Normative Aspects (NNA) for ITALY 2017 CENELEC 01124 EN 50665 Generic standard for assessment of electronic and electrical equipment related to human exposure restrictions for
electromagnetic fields (0 Hz - 300 GHz)2017 CENELEC 0
1125 EN 61587-6 Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 6: Securityaspects for indoor cabinets
2017 CENELEC 0
1126 EN 61400-25-6 Wind energy generation systems - Part 25-6: Communications for monitoring and control of wind power plants - Logicalnode classes and data classes for condition monitoring
2017 CENELEC 0
1127 EN 61291-5-2 Optical amplifiers - Part 5-2: Qualification specifications - Reliability qualification for optical fibre amplifiers 2017 CENELEC 01128 EN 62056-5-3 Electricity metering data exchange - The DLMS/COSEM suite - Part 5-3: DLMS/COSEM application layer 2017 CENELEC 01129 EN 62841-3-14 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-14: Particular
requirements for transportable drain cleaners2017 CENELEC 0
1130 EN 61010-2-202
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-202: Particularrequirements for electrically operated valve actuators
2017 CENELEC 0
1131 EN 62670-3 Photovoltaic concentrators (CPV) - Performance testing - Part 3: Performance measurements and power rating 2017 CENELEC 01132 EN 60695-8-1 Fire hazard testing - Part 8-1: Heat release - General guidance 2017 CENELEC 01133 EN 62802 Measurement methods of a half-wavelength voltage and a chirp parameter for Mach-Zehnder optical modulators in
highfrequency radio on fibre (RoF) Systems2017 CENELEC 0
1134 EN 50134-7 Alarm systems - Social alarm systems - Part 7: Application guidelines 2017 CENELEC 01135 EN 61280-4-4 Fibre optic communication subsystem test procedures - Part 4-4: Cable plants and links - Polarization mode dispersion
measurement for installed links2017 CENELEC 0
1136 EN 60950-22 Information technology equipment - Safety - Part 22: Equipment to be installed outdoors 2017 CENELEC 01137 EN 50288-12-1 Multi-element metallic cables used in analogue and digital communications and control - Part 12-1: Sectional specification
for screened cables characterised from 1 MHz up to 2 000 MHz - Horizontal and building backbone cables2017 CENELEC 0
1138 EN 55016-2-3 Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement ofdisturbances and immunity - Radiated disturbance measurements
2017 CENELEC 0
1139 EN 60793-1-61 Optical fibres - Part 1-61: Measurement methods and test procedures - Polarization crosstalk 2017 CENELEC 01140 CLC/TS 61400-
26-2Wind turbines - Part 26-2: Production-based availability for wind turbines 2017 CENELEC 0
1141 EN 50672 Ecodesign requirements for computers and computer servers 2017 CENELEC 01142 EN 60068-2-18 Environmental testing - Part 2-18: Tests - Test R and guidance: Water 2017 CENELEC 01143 EN 60127-5 Miniature fuses - Part 5: Guidelines for quality assessment of miniature fuse-links 2017 CENELEC 01144 EN 60749-9 Semiconductor devices - Mechanical and climatic test methods - Part 9: Permanence of marking 2017 CENELEC 01145 EN 60780-323 Nuclear facilities - Electrical equipment important to safety - Qualification 2017 CENELEC 01146 EN 62745 Safety of machinery - Requirements for cableless control systems of machinery 2017 CENELEC 01147 EN 60695-1-10 Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines 2017 CENELEC 01148 EN 62453-1 Field Device Tool (FDT) interface specification - Part 1: Overview and guidance 2017 CENELEC 01149 EN 62714-3 Engineering data exchange format for use in industrial automation systems engineering - Automation markup language -
Part 3: Geometry and kinematics2017 CENELEC 0
1150 EN 60728-13-1 Cable networks for television signals, sound signals and interactive services - Part 13-1: Bandwidth expansion for broadcastsignal over FTTH system
2017 CENELEC 0
1151 EN 61511-3 Functional safety - Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination ofthe required safety integrity levels
2017 CENELEC 0
1152 EN 61577-2 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 2: Specificrequirements for 222Rn and 220Rn measuring instruments
2017 CENELEC 0
1153 EN 62920 Photovoltaic power generating systems - EMC requirements and test methods for power conversion equipment 2017 CENELEC 01154 CLC/TR 50669 Investigation Results on Electromagnetic Interference in the Frequency Range below 150 kHz 2017 CENELEC 01155 EN 61360-6 Standard data element types with associated classification scheme for electric components - Part 6: IEC Common Data
Dictionary (IEC CDD) quality guidelines2017 CENELEC 0
1156 EN 50155 Railway applications - Rolling stock - Electronic equipment 2017 CENELEC 01157 EN 61784-3-2 Industrial communication networks - Profiles - Part 3-2: Functional safety fieldbuses - Additional specifications for CPF 2 2017 CENELEC 01158 EN 60623 Secondary cells and batteries containing alkaline or other nonacid electrolytes - Vented nickel-cadmium prismatic
rechargeable single cells2017 CENELEC 0
1159 EN 61800-5-2 Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional 2017 CENELEC 01160 EN 62287-1 Maritime navigation and radiocommunication equipment and systems - Class B shipborne equipment of the automatic
identification system (AIS) - Part 1: Carrier-sense time division multiple access (CSTDMA) techniques2017 CENELEC 0
1161 EN 61300-2-9 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests -Shock
2017 CENELEC 0
1162 EN 50385 Product standard to demonstrate the compliance of base station equipment with radiofrequency electromagnetic fieldexposure limits (110 MHz - 100 GHz), when placed on the market
2017 CENELEC 0
1163 EN 62586-1 Power quality measurement in power supply systems - Part 1: Power quality instruments (PQI) 2017 CENELEC 01164 EN 61857-31 Electrical insulation systems - Procedures for thermal evaluation - Part 31: Applications with a designed life of 5 000 h or
less2017 CENELEC 0
1165 EN 60077-1 Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules 2017 CENELEC 01166 EN 61810-2 Electromechanical elementary relays - Part 2: Reliability 2017 CENELEC 01167 EN 62435-5 Electronic components - Long-term storage of electronic semiconductor devices - Part 5: Die and wafer devices 2017 CENELEC 01168 EN 60749-28 Semiconductor devices - Mechanical and climatic test methods - Part 28: Electrostatic discharge (ESD) sensitivity testing -
Charged device model (CDM) - device level2017 CENELEC 0
1169 EN 50647 Basic standard for the evaluation of workers exposure to electric and magnetic fields from equipment and installations forthe production, transmission and distribution of electricity
2017 CENELEC 0
1170 EN 62657-1 Industrial communication networks - Wireless communication networks - Part 1: Wireless communication requirementsand spectrum considerations
2017 CENELEC 0
1171 EN 50126-1 Railway Applications - The Specification and Demonstration of Reliability, Availability, Maintainability and Safety(RAMS) - Part 1: Generic RAMS Process
2017 CENELEC 0
1172 EN 62453-309 Field device tool (FDT) interface specification - Part 309: Communication profile integration - IEC 61784 CPF 9 2017 CENELEC 01173 EN 62351-11 Power systems management and associated information exchange - Data and communications security - Part 11: Security
for XML documents2017 CENELEC 0
1174 EN 61005 Radiation protection instrumentation - Neutron ambient dose equivalent (rate) meters 2017 CENELEC 01175 EN 61169-11 Radio-frequency connectors - Part 11: Sectional specification for RF coaxial connectors with inner diameter of outer
conductor 9,5 mm with threaded coupling - Characteristic impedance 50 خ_ (type 4,1-9,5)2017 CENELEC 0
1176 CLC/TS 50136-7
Alarm systems - Alarm transmission systems and equipment - Part 7: Application guidelines 2017 CENELEC 0
1177 EN 61191-4 Printed board assemblies - Part 4: Sectional specification - Requirements for terminal soldered assemblies 2017 CENELEC 01178 EN 50463-5 Railway applications - Energy measurement on board trains - Part 5: Conformity assessment 2017 CENELEC 01179 EN 62056-6-1 Electricity metering data exchange - The DLMS/COSEM suite - Part 6-1: Object Identification System (OBIS) 2017 CENELEC 01180 EN 50380 Marking and documentation requirements for Photovoltaic Modules 2017 CENELEC 01181 EN 62820-1-2 Building intercom system - Part 1-2: System requirements - Building intercom systems using the internet protocol (IP) 2017 CENELEC 01182 EN 60793-2-70 Optical fibres - Part 2-70: Product specifications - Sectional specification for polarization-maintaining fibres 2017 CENELEC 01183 EN 62805-1 Method for measuring photovoltaic (PV) glass - Part 1: Measurement of total haze and spectral distribution of haze 2017 CENELEC 01184 EN 60645-1 Electroacoustics - Audiometric equipment - Part 1: Equipment for pure-tone and speech audiometry 2017 CENELEC 0
1185 EN 60715 Dimensions of low-voltage switchgear and controlgear - Standardized mounting on rails for mechanical support ofswitchgear, controlgear and accessories
2017 CENELEC 0
1186 EN 62765-1 Nuclear powers plants - Instrumentation and control important to safety - Management of ageing of sensors andtransmitters - Part 1: Pressure transmitters
2017 CENELEC 0
1187 EN 50655-3 Electric cables - Accessories - Material characterization - Part 3: Fingerprinting for cold shrinkable components for low andmedium voltage applications up to 20,8/36 (42) kV
2017 CENELEC 0
1188 EN 50090-3-4 Home and Building Electronic Systems (HBES) - Part 3-4: Secure Application Layer, Secure Service, Secure configurationand security Resources
2017 CENELEC 0
1189 EN 60317-69 Specifications for particular types of winding wires - Part 69: Polyester or polyesterimide overcoated with polyamideimideenamelled rectangular aluminium wire, class 220
2017 CENELEC 0
1190 EN 50849 Sound systems for emergency purposes 2017 CENELEC 01191 EN 50131-2-2 Alarm systems - Intrusion and hold-up systems - Part 2-2: Intrusion detectors - Passive infrared detectors 2017 CENELEC 01192 EN 50332-3 Sound system equipment: headphones and earphones associated with personal music players - maximum sound pressure
level measurement methodology - Part 3: measurement method for sound dose management2017 CENELEC 0
1193 EN 62488-2 Power line communication systems for power utility applications - Part 2: Analogue power line carrier terminals or APLC 2017 CENELEC 01194 EN 61753-121-
2Fibre optic interconnecting devices and passive components - Performance standard - Part 121-2: Simplex and duplex cordswith single-mode fibre and cylindrical ferrule connectors for category C - Controlled environment
2017 CENELEC 0
1195 CLC/TS 50661-1
Alarm systems - External perimeter security systems - Part 1: System requirements 2017 CENELEC 0
1196 EN 62256 Hydraulic turbines, storage pumps and pump-turbines - Rehabilitation and performance improvement 2017 CENELEC 01197 EN 60793-1-33 Optical fibres - Part 1-33: Measurement methods and test procedures - Stress corrosion susceptibility 2017 CENELEC 01198 EN 61788-22-1 Superconductivity - Part 22-1: Superconducting electronic devices - Generic specification for sensors and detectors 2017 CENELEC 01199 EN 60839-11-
31Alarm and electronic security systems - Part 11-31: Electronic access control systems - Core interoperability protocol basedon Web services
2017 CENELEC 0
1200 EN 60400 Lampholders for tubular fluorescent lamps and starterholders 2017 CENELEC 01201 EN 60444-8 Measurement of quartz crystal unit parameters - Part 8 : Test fixture for surface mounted quartz crystal units 2017 CENELEC 01202 EN 60749-43 Semiconductor devices - Mechanical and climatic test methods - Part 43: Guidelines for IC reliability qualification plans 2017 CENELEC 01203 EN 60679-1 Piezoelectric, dielectric and electrostatic oscillators of assessed quality - Part 1: Generic specification 2017 CENELEC 01204 EN 62232 Determination of RF field strength, power density and SAR in the vicinity of radiocommunication base stations for the
purpose of evaluating human exposure2017 CENELEC 0
1205 EN 55035 Electromagnetic compatibility of multimedia equipment â__ Immunity requirements (CISPR 35:2016 , modified) 2017 CENELEC 01206 EN 60793-1-60 Optical fibres - Part 1-60: Measurement methods and test procedures - Beat length 2017 CENELEC 01207 EN 60317-0-7 Specifications for particular types of winding wires - Part 0-7: General requirements - Fully insulated (FIW) zero-defect
enamelled round copper wire2017 CENELEC 0
1208 EN 62944 Audio, video and multimedia systems and equipment - Digital television accessibility - Functional specifications 2017 CENELEC 01209 EN 50588-1 Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV - Part 1: General requirements 2017 CENELEC 01210 EN 60947-5-1 Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical
control circuit devices2017 CENELEC 0
1211 EN 61987-16 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 16: Listsof properties (LOPs) for density measuring equipment for electronic data exchange
2017 CENELEC 0
1212 EN 50121-2 Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world 2017 CENELEC 01213 EN 60674-2 Specification for plastic films for electrical purposes - Part 2: Methods of test 2017 CENELEC 01214 EN 61800-9-1 Adjustable speed electrical power drive systems - Part 9-1: Ecodesign for power drive systems, motor starters, power
electronics and their driven applications - General requirements for setting energy efficiency standards for power drivenequipment using
2017 CENELEC 0
1215 EN 63044-1 Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 1: Generalrequirements
2017 CENELEC 0
1216 EN 61810-2-1 Electromechanical elementary relays - Part 2-1: Reliability - Procedure for the verification of B10 values 2017 CENELEC 01217 EN 50625-2-3 Collection, logistics & treatment requirements for WEEE - Part 2- 3: Treatment requirements for temperature
exchange equipment and other WEEE containing VFC and/or VHC2017 CENELEC 0
1218 EN 60404-1 Magnetic materials - Part 1: Classification 2017 CENELEC 01219 EN 61960-3 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for
portable applications - Part 3: Prismatic and cylindrical lithium secondary cells, and batteries made from them2017 CENELEC 0
1220 EN 61191-2 Printed board assemblies - Part 2: Sectional specification - Requirements for surface mount soldered assemblies 2017 CENELEC 01221 EN 50655-2 Electric cables - Accessories - Material characterization - Part 2: Fingerprinting for heat shrinkable components for low and
medium voltage applications up to 20,8/36 (42) kV2017 CENELEC 0
1222 EN 62931 GX16t-5 capped tubular led lamp - Safety specifications 2017 CENELEC 01223 EN 61000-4-31 Electromagnetic compatibility (EMC) - Part 4-31: Testing and measurement techniques - AC mains ports broadband
conducted disturbance immunity test2017 CENELEC 0
1224 EN 62561-4 Lightning protection system components (LPSC) - Part 4: Requirements for conductor fasteners 2017 CENELEC 01225 EN 60749-4 Semiconductor devices - Mechanical and climatic test methods - Part 4: Damp heat, steady state, highly accelerated stress
test (HAST)2017 CENELEC 0
1226 EN 60317-0-10 Specifications for particular types of winding wires - Part 0-10: General requirements - Polyester glass-fibre wound fused,unvarnished, or resin or varnish impregnated, bare or enamelled round copper wire
2017 CENELEC 0
1227 EN 61970-452 Energy management system application program interface (EMS-API) - Part 452: CIM static transmission network modelprofiles
2017 CENELEC 0
1228 EN 62453-2 Field Device Tool (FDT) Interface Specification - Part 2: Concepts and detailed Description 2017 CENELEC 01229 EN 62040-5-3 Uninterruptible power systems (UPS) - Part 5-3: DC output UPS - Performance and test requirements 2017 CENELEC 01230 EN 62766-3 Consumer terminal function for access to IPTV and open internet multimedia services - Part 3: Content metadata 2017 CENELEC 01231 EN 61188-7 Printed boards and printed board assemblies - Design and use - Part 7: Electronic component zero orientation for CAD
library construction2017 CENELEC 0
1232 EN 50121-3-1 Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle 2017 CENELEC 01233 EN 60317-68 Specifications for particular types of winding wires - Part 68: Polyvinyl acetal enamelled rectangular aluminium wire, class
1202017 CENELEC 0
1234 EN 62287-2 Maritime navigation and radiocommunication equipment and systems - Class B shipborne equipment of the automaticidentification system (AIS) - Part 2: Self-organising time division multiple access (SOTDMA) techniques
2017 CENELEC 0
1235 EN 62788-1-6 Measurement procedures for materials used in photovoltaic modules - Part 1-6: Encapsulants - Test methods fordetermining the degree of cure in Ethylene-Vinyl Acetate
2017 CENELEC 0
1236 EN 62228-2 Integrated circuits - EMC evaluation of transceivers - Part 2: LIN transceivers 2017 CENELEC 01237 EN 61951-2 Secondary cells and batteries containing alkaline or other non acid electrolytes - Secondary sealed cells and batteries for
portable applications - Part 2: Nickel-metal hydride2017 CENELEC 0
1238 EN 60839-11-32
Alarm and electronic security systems - Part 11-32: Electronic access control systems - Access control monitoring based onWeb services
2017 CENELEC 0
1239 EN 63080 Accessibility terms and definitions 2017 CENELEC 01240 EN 62680-3-1 Universal Serial Bus interfaces for data and power - Part 3-1: Universal Serial Bus 3.1 Specification 2017 CENELEC 01241 EN 62386-302 Digital addressable lighting interface - Part 302: Particular requirements - Input devices - Absolute input devices 2017 CENELEC 01242 EN 62656-5 Standardized product ontology register and transfer by spreadsheets - Part 5: Interface for activity description 2017 CENELEC 01243 EN 62927 Voltage sourced converter (VSC) valves for static synchronous compensator (STATCOM) - Electrical Testing 2017 CENELEC 01244 EN 60794-1-2 Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures - General guidance 2017 CENELEC 01245 EN 60793-1-1 Optical fibres - Part 1-1: Measurement methods and test procedures - General and guidance 2017 CENELEC 0
1246 EN 60079-30-2 Explosive atmospheres - Part 30-2: Electrical resistance trace heating - Application guide for design, installation andmaintenance
2017 CENELEC 0
1247 EN 50645 Ecodesign requirements for small power transformers 2017 CENELEC 01248 EN 62496-2 Optical circuit boards - Basic test and measurement procedures - Part 2: General guidance for definition of measurement
conditions for optical characteristics of optical circuit boards2017 CENELEC 0
1249 EN 50341-2-5 Overhead electrical lines exceeding AC 1 kV - Part 2-5: National Normative Aspects (NNA) for DENMARK 2017 CENELEC 01250 EN 60312-1 Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance 2017 CENELEC 01251 EN 61169-59 Radio-frequency connectors -Part 59: Sectional specification for type L32-4 and L32-5 threaded multi-pin radio-frequency
connectors2017 CENELEC 0
1252 EN 62754 Computation of waveform Parameter uncertainties 2017 CENELEC 01253 EN 61987-24-3 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-3:
Lists of properties (LOPs) of flow modification accessories for electronic data exchange2017 CENELEC 0
1254 EN 60794-1-3 Optical fibre cables - Part 1-3: Generic specification - optical cable elements 2017 CENELEC 01255 EN 60317-70 Specifications for particular types of winding wires - Part 70: Polyester glass-fibre wound fused, unvarnished or resin or
varnish impregnated, bare or enamelled round copper wire, temperature index 1552017 CENELEC 0
1256 EN 62924 Railway applications - Fixed installations - Stationary energy storage system for DC traction systems 2017 CENELEC 01257 EN 62940 Maritime navigation and radiocommunication equipment and systems - Integrated communication system (ICS) -
Operational and performance requirements, methods of testing and required test results2017 CENELEC 0
1258 EN 61191-3 Printed board assemblies - Part 3: Sectional specification - Requirements for through-hole mount soldered assemblies 2017 CENELEC 01259 EN 61326-3-1 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements
for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Generalindustrial applic
2017 CENELEC 0
1260 EN 61076-3-104
Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way,shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz
2017 CENELEC 0
1261 EN 62619 Secondary cells and batteries containing alkaline or other nonacid electrolytes - Safety requirements for secondary lithiumcells and batteries, for use in industrial applications
2017 CENELEC 0
1262 EN 50657 Railways Applications - Rolling stock applications - Software on Board Rolling Stock 2017 CENELEC 01263 EN 60749-3 Semiconductor devices - Mechanical and climatic test methods - Part 3: External visual examination 2017 CENELEC 01264 EN 62264-3 Enterprise-control system integration - Part 3: Activity models of manufacturing operations management 2017 CENELEC 01265 EN 62453-302 Field device tool (FDT) interface specification - Part 302: Communication profile integration - IEC 61784 CPF 2 2017 CENELEC 01266 EN 62884-1 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 1: Basic methods for the
measurement2017 CENELEC 0
1267 EN 60317-67 Specifications for particular types of winding wires - Part 67: Polyvinyl acetal enamelled rectangular aluminium wire, class105
2017 CENELEC 0
1268 EN 60500 Underwater acoustics - Hydrophones - Properties of hydrophones in the frequency range 1 Hz to 500 kHz 2017 CENELEC 01269 EN 61987-24-2 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-2:
List of properties (LOPs) of valve/actuator accessories for electronic data exchange2017 CENELEC 0
1270 EN 62841-3-13 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-13: Particularrequirements for transportable drills
2017 CENELEC 0
1271 EN 61643-351 Components for low-voltage surge protective devices - Part 351: Performance requirements and test methods fortelecommunications and signalling network surge isolation transformers (SIT)
2017 CENELEC 0
1272 EN 62766-2-1 Consumer terminal function for access to IPTV and open internet multimedia services - Part 2-1: Media formats 2017 CENELEC 01273 EN 50090-6-1 Home and Building Electronic Systems (HBES) - Part 6-1: Interfaces - Webservice interface 2017 CENELEC 01274 EN 62952-3 Power sources for a wireless communication device - Part 3: Generic energy harvesting adaptor module 2017 CENELEC 01275 EN 60966-2-6 Radio frequency and coaxial cable assemblies - Part 2-6: Detail specification for cable assemblies for radio and TV
receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-24 connectors2017 CENELEC 0
1276 EN 61000-4-39 Electromagnetic Compatibility (EMC) - Part 4-39: Testing and measurement techniques - Radiated fields in closeproximity - Immunity test
2017 CENELEC 0
1277 EN 61800-9-2 Adjustable speed electrical power drive systems - Part 9-2: Ecodesign for power drive systems, motor starters, powerelectronics and their driven applications - Energy efficiency indicators for power drive systems and motor starters
2017 CENELEC 0
1278 EN 61076-3-122
Connectors for electrical and electronic equipment - Product requirements - Part 3-122: Detail specification for 8-way,shielded, free and fixed connectors for I/O and Gigabit Ethernet applications in harsh environments
2017 CENELEC 0
1279 EN 61189-5-503
Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 5-503:General test method for materials and assemblies - Conductive anodic filaments (CAF) testing of circuit boards
2017 CENELEC 0
1280 EN 61400-25-5 Wind energy generation systems - Part 25-5: Communications for monitoring and control of wind power plants -Compliance testing
2017 CENELEC 0
1281 EN 62948 Industrial networks - Wireless communication network and communication profiles - WIA-FA 2017 CENELEC 01282 EN 62056-8-6 Electricity metering data exchange - The DLMS/COSEM suite - Part 8-6: High speed PLC ISO/IEC 12139-1 profile for
neighbourhood networks2017 CENELEC 0
1283 EN 62196-2 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensionalcompatibility and interchangeability requirements for a.c. pin and contact-tube accessories
2017 CENELEC 0
1284 EN 61215-1-3 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-3: Special requirements for testingof thin-film amorphous silicon based photovoltaic (PV) modules
2017 CENELEC 0
1285 EN 62805-2 Method for measuring photovoltaic (PV) glass - Part 2: Measurement of transmittance and reflectance 2017 CENELEC 01286 EN 63002 Identification and communication interoperability method for external power supplies used with portable computing
devices2017 CENELEC 0
1287 EN 62841-2-17 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-17: Particularrequirements for hand-held routers
2017 CENELEC 0
1288 EN 62739-3 Test method for erosion of wave soldering equipment using molten lead-free solder alloy - Part 3: Selection guidance oferosion test methods
2017 CENELEC 0
1289 EN 62439-2 Industrial communication networks - High availability automation networks - Part 2: Media Redundancy Protocol (MRP) 2017 CENELEC 01290 EN 62717 LED modules for general lighting - Performance requirements 2017 CENELEC 01291 EN 61000-4-12 Electromagnetic compatibility (EMC) - Part 4-12: Testing and measurement techniques - Ring wave immunity test 2017 CENELEC 01292 EN 60664-3 Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for
protection against pollution2017 CENELEC 0
1293 EN 82304-1 Health Software - Part 1: General requirements for product safety 2017 CENELEC 01294 EN 62321-8 Determination of certain substances in electrotechnical products - Part 8: Phthalates in polymers by gas chromatography-
mass spectrometry (GC-MS), gas chromatography-mass spectrometry using a pyrolyzer/thermal desorption accessory(Py/TD-GC-MS)
2017 CENELEC 0
1295 EN 50131-6 Alarm systems - Intrusion and hold-up systems - Part 6: Power supplies 2017 CENELEC 01296 EN 61724-1 Photovoltaic system performance - Part 1: Monitoring 2017 CENELEC 01297 EN 61755-3-10 Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-10: Connector
parameters of non-dispersion shifted single mode physically contacting fibres - Non-angled, ferrule-less, bore alignmentconnectors
2017 CENELEC 0
1298 EN 60153-4 Hollow metallic waveguides - Part 4: Relevant specifications for circular waveguides 2017 CENELEC 01299 EN 62841-2-10 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-10: Particular
requirements for hand-held mixers2017 CENELEC 0
1300 EN 60728-11 Cable networks for television signals, sound signals and interactive services - Part 11: Safety 2017 CENELEC 01301 EN 60749-6 Semiconductor devices - Mechanical and climatic test methods - Part 6: Storage at high temperature 2017 CENELEC 01302 EN 61000-4-10 Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic
field immunity test2017 CENELEC 0
1303 EN 61076-2-113
Connectors for electronic equipment - Product requirements - Part 2-113: Circular connectors - Detail specification forconnectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz
2017 CENELEC 0
1304 EN 61240 Piezoelectric devices - Preparation of outline drawings of surface-mounted devices (SMD) for frequency control andselection - General rules
2017 CENELEC 0
1305 EN 60384-15 Fixed capacitors for use in electronic equipment - Part 15: Sectional specification: Fixed tantalum capacitors with non-solidor solid electrolyte
2017 CENELEC 0
1306 EN 62386-304 Digital addressable lighting interface - Part 304: Particular requirements - Input devices - Light sensor 2017 CENELEC 01307 EN 50152-3-1 Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3-1: Measurement, control and
protection devices for specific use in a.c. traction systems - Devices2017 CENELEC 0
1308 EN 62979 Photovoltaic module - Bypass diode - Thermal runaway test 2017 CENELEC 01309 CLC/TS 50625-
3-5Collection, logistics & Treatment requirements for WEEE - Part 3-5: Technical specification for de-pollution -Photovoltaic panels
2017 CENELEC 0
1310 EN 50620 Electric cables - Charging cables for electric vehicles (BT(DE/NOT)259) 2017 CENELEC 01311 CLC/TR 50659 Electromagnetic characteristics of linear cable management systems (CMS) 2017 CENELEC 01312 EN 60445 Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals,
conductor terminations and conductors2017 CENELEC 0
1313 EN 62435-2 Electronic components - Long-term storage of electronic semiconductor devices - Part 2: Deterioration mechanisms 2017 CENELEC 01314 EN 60749-5 Semiconductor devices - Mechanical and climatic test methods - Part 5: Steady-state temperature humidity bias life test 2017 CENELEC 01315 EN 61605 Fixed inductors for use in electronic and telecommunication equipment - Marking codes 2017 CENELEC 01316 EN 50463-4 Railway applications - Energy measurement on board trains - Part 4: Communication 2017 CENELEC 01317 EN 60966-2-5 Radio frequency and coaxial cable assemblies - Part 2-5: Detail specification for cable assemblies for radio and TV
receivers - Frequency range 0 MHz to 1 000 MHz, IEC 61169-2 connectors2017 CENELEC 0
1318 EN 60838-2-3 Miscellaneous lampholders - Part 2-3: Particular requirements - Lampholders for double-capped linear LED lamps 2017 CENELEC 01319 CLC/TS 61400-
26-3Wind energy generation systems - Part 26-3: Availability for wind power stations 2017 CENELEC 0
1320 EN 62386-303 Digital addressable lighting interface - Part 303: Particular requirements - Input devices - Occupancy sensor 2017 CENELEC 01321 EN 62569-1 Generic specification of information on products by properties - Part 1: Principles and method 2017 CENELEC 01322 EN 62150-5 Fibre optic active components and devices - Test and measurement procedures - Part 5: Wavelength channel tuning time of
tuneable transmitters2017 CENELEC 0
1323 EN 62922 Organic light emitting diode (OLED) panels for general lighting - Performance Requirements 2017 CENELEC 01324 EN 60079-13 Explosive atmospheres - Part 13: Equipment protection by pressurized room "p" and artificially ventilated room "v" 2017 CENELEC 01325 EN 50631-1 Household appliances network and grid connectivity - Part 1: General Requirements, Generic Data Modelling and Neutral
Messages2017 CENELEC 0
1326 EN 50121-5 Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installationsand apparatus
2017 CENELEC 0
1327 CLC/TS 50625-3-4
Collection, logistics & treatment requirements for WEEE - Part 3- 4: Specification for de-pollution - temperatureexchange equipment
2017 CENELEC 0
1328 EN 60695-1-30 Fire hazard testing - Part 1-30: Guidance for assessing the fire hazard of electrotechnical products - Preselection testingprocess - General guidelines
2017 CENELEC 0
1329 EN 62925 Concentrator photovoltaic (CPV) modules - Thermal cycling test to differentiate increased thermal fatigue durability 2017 CENELEC 01330 EN 62281 Safety of primary and secondary lithium cells and batteries during transport 2017 CENELEC 01331 EN 61745 End-face image analysis procedure for the calibration of optical fibre geometry test sets 2017 CENELEC 01332 EN 50637 Medical electrical equipment - Particular requirements for the basic safety and essential performance of medical beds for
children2017 CENELEC 0
1333 EN 50341-2-9 Overhead electrical lines exceeding AC 1 kV - Part 2-9: National Normative Aspects (NNA) for Great Britain and NorthernIreland - Incorporates Amendment A1: 2018
2017 CENELEC 0
1334 EN 50463-2 Railway applications - Energy measurement on board trains - Part 2: Energy measuring 2017 CENELEC 0
1335 EN 50655-1 Electric cables - Accessories - Material characterization - Part 1: Fingerprinting for resinous compounds 2017 CENELEC 01336 EN 61784-3-13 Industrial communication networks - Profiles - Part 3-13: Functional safety fieldbuses - Additional specifications for CPF
132017 CENELEC 0
1337 EN 50121-1 Railway applications - Electromagnetic compatibility - Part 1: General 2017 CENELEC 01338 EN 62689-2 Current and voltage sensors or detectors, to be used for fault passage indication purposes - Part 2: System aspects 2017 CENELEC 01339 EN 61300-2-55 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-55: Tests -
Strength of mounted adaptor2017 CENELEC 0
1340 CLC/TS 61400-26-1
Wind turbines - Part 26-1: Time-based availability for wind turbine generating systems 2017 CENELEC 0
1341 EN 62271-1 High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear andcontrolgear
2017 CENELEC 0
1342 EN 61784-3-3 Industrial communication networks - Profiles - Part 3-3: Functional safety fieldbuses - Additional specifications for CPF 3 2017 CENELEC 01343 EN 61951-1 Secondary cells and batteries containing alkaline or other nonacid electrolytes - Secondary sealed cells and batteries for
portable applications - Part 1: Nickel-cadmium2017 CENELEC 0
1344 EN 61058-1-2 Switches for appliances - Part 1-2: Requirements for electronic switches 2016 CENELEC 01345 EN 50341-2-4 Overhead electrical lines exceeding AC 1 kV - Part 2-4: National Normative Aspects (NNA) for Germany 2016 CENELEC 01346 EN 62446-1 Photovoltaic (PV) systems - Requirements for testing, documentation and maintenance - Part 1: Grid connected systems -
Documentation, commissioning tests and inspection2016 CENELEC 0
1347 EN 60966-2-7 Radio frequency and coaxial cable assemblies - Part 2-7: Detail specification for cable assemblies for radio and TVreceivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-47 connectors
2016 CENELEC 0
1348 EN 62317-11 Ferrite cores - Dimensions - Part 11: EC-cores for use in power supply applications 2016 CENELEC 01349 EN 62788-1-5 Measurement procedures for materials used in photovoltaic modules - Part 1-5: Encapsulants - Measurement of change in
linear dimensions of sheet encapsulation material resulting from applied thermal conditions2016 CENELEC 0
1350 EN 62580-1 Electronic railway equipment - On-board multimedia and telematic subsystems for railways - Part 1: General architecture 2016 CENELEC 01351 EN 61340-5-1 Electrostatics - Part 5-1: Protection of electronic devices from electrostatic phenomena - General requirements 2016 CENELEC 01352 EN 60603-7-81 Connectors for electronic equipment - Part 7-81: Detail specification for 8-way, shielded, free and fixed connectors, for
data transmissions with frequencies up to 2 000 MHz2016 CENELEC 0
1353 EN 61882 Hazard and operability studies (HAZOP studies) - Application guide 2016 CENELEC 01354 EN 61987-22 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 22: Lists
of Properties (LOPs) of valve body assemblies for electronic data exchange2016 CENELEC 0
1355 EN 60794-3-21 Optical fibre cables - Part 3-21: Outdoor cables - Product specification for optical self-supporting aerial telecommunicationcables for use in premises cabling
2016 CENELEC 0
1356 EN 50131-2-8 Alarm systems - Intrusion and hold-up systems - Part 2-8: Intrusion detectors - Shock detectors 2016 CENELEC 01357 EN 50290-2-33 Communication cables - Part 2-33: Common design rules and construction - Polyethylene insulation compounds for multi
element metallic cables for indoor installation (data cable)2016 CENELEC 0
1358 EN 50632-2-4 Electric motor-operated electric tools - Dust measurement procedure - Part 2-4: Particular requirements for sanders otherthan disk type
2016 CENELEC 0
1359 EN 50592 Railway applications - Testing of rolling stock for electromagnetic compatibility with axle counters 2016 CENELEC 01360 EN 50341-2-22 Overhead electrical lines exceeding AC 1 kV - Part 2-22: National Normative Aspects (NNA) for Poland 2016 CENELEC 01361 EN 62911 Audio, video and information technology equipment - Routine electrical safety testing in production 2016 CENELEC 01362 EN 60749-44 Semiconductor devices - Mechanical and climatic test methods - Part 44: Neutron beam irradiated single event effect (SEE)
test method for semiconductor devices2016 CENELEC 0
1363 EN 61377 Railway applications - Rolling stock - Combined test method for traction Systems 2016 CENELEC 01364 EN 61003-1 Industrial-process control systems - Instruments with analogue inputs and two- or multi-position outputs - Part 1: Methods
for evaluating performance2016 CENELEC 0
1365 EN 61800-7-204
Adjustable speed electrical power drive systems - Part 7-204: Generic interface and use of profiles for power drive systems- Profile type 4 specification
2016 CENELEC 0
1366 EN 60310 Railway applications - Traction transformers and inductors on board rolling Stock 2016 CENELEC 01367 EN 62877-1 Electrolyte and water for vented lead acid accumulators - Part 1: Requirements for electrolyte 2016 CENELEC 01368 EN 50290-2-36 Communication cables - Part 2-36: Common design rules and construction - Crosslinked Silicone rubber insulation
compound2016 CENELEC 0
1369 EN 50341-2-16 Overhead electrical lines exceeding AC 1 kV - Part 2-16: National Normative Aspects (NNA) for NORWAY 2016 CENELEC 01370 EN 61249-2-44 Materials for printed boards and other interconnecting structures - Part 2-44: Reinforced base materials clad and unclad -
Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of defined flammability (vertical burningtest), copper-c
2016 CENELEC 0
1371 EN 62788-1-2 Measurement procedures for materials used in photovoltaic modules - Part 1-2: Encapsulants - Measurement of volumeresistivity of photovoltaic encapsulants and other polymeric materials
2016 CENELEC 0
1372 EN 62264-5 Enterprise-control system integration - Part 5: Business to manufacturing transactions 2016 CENELEC 01373 EN 61000-4-16 Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted,
common mode disturbances in the frequency range 0 Hz to 150 kHz2016 CENELEC 0
1374 EN 60424-3 Ferrite cores - Guidelines on the limits of surface irregularities - Part 3: ETD-cores, EER-cores, EC-cores and E-cores 2016 CENELEC 01375 EN 61753-052-
3Fibre optic interconnecting devices and passive components - Performance standard - Part 052-3: Single-mode fibrenonconnectorized fixed attenuator - Category U in uncontrolled environment
2016 CENELEC 0
1376 EN 62087-5 Audio, video and related equipment - Determination of power consumption - Part 5: Set top boxes (STB) 2016 CENELEC 01377 EN 62343-3-1 Dynamic modules - Part 3-1: Performance specification templates - Dynamic channel equalizers 2016 CENELEC 01378 EN 62779-3 Semiconductor devices - Semiconductor interface for human body communication - Part 3: Functional type and its
operational conditions2016 CENELEC 0
1379 EN 50526-3 Railway application - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 3: Application Guide 2016 CENELEC 01380 EN 60086-2 Primary batteries - Part 2: Physical and electrical specifications 2016 CENELEC 01381 EN 50436-3 Alcohol interlocks - Test methods and performance requirements - Part 3: Guidance for authorities, decision makers,
purchasers and users2016 CENELEC 0
1382 EN 60794-3-70 Optical fibre cables - Part 3-70: Outdoor cables - Family specification for outdoor optical fibre cables for rapid/multipledeployment
2016 CENELEC 0
1383 EN 62343-1 Dynamic modules - Part 1: Performance standards - General conditions 2016 CENELEC 01384 EN 61000-4-9 Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques - Impulse magnetic field immunity
test2016 CENELEC 0
1385 EN 62841-3-4 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particularrequirements for transportable bench grinders - Incorporates Amendment A11: 2017
2016 CENELEC 0
1386 EN 60990 Methods of Measurement of Touch Current and Protective Conductor Current 2016 CENELEC 01387 EN 62760 Audio reproduction method for normalized loudness level 2016 CENELEC 01388 EN 60335-2-15 Household and similar electrical appliances - Safety - Part 2-15: Particular requirements for appliances for heating liquids -
Incorporates Amendment A11: 20182016 CENELEC 0
1389 EN 61754-34 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 34: Type URMconnector family
2016 CENELEC 0
1390 EN 61058-1-1 Switches for appliances - Part 1-1: Requirements for mechanical switches 2016 CENELEC 01391 EN 45544-4 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic
gases and vapours - Part 4: Guide for selection, installation, use and maintenance2016 CENELEC 0
1392 EN 61078 Reliability block diagrams 2016 CENELEC 01393 EN 60153-2 Hollow metallic waveguides - Part 2: Relevant specifications for ordinary rectangular waveguides 2016 CENELEC 01394 EN 60317-59 Specifications for particular type of winding wires - Part 59: Polyamideimide enameled round copper wire, class 240 2016 CENELEC 01395 EN 60974-4 Arc welding equipment - Part 4: Periodic inspection and testing 2016 CENELEC 0
1396 EN 61169-53 Radio-frequency connectors - Part 53: Sectional specification for RF coaxial connectors with inner diameter of outerconductor 16 mm with screw lock - Characteristic impedance 50 O (Type S7- 16)
2016 CENELEC 0
1397 EN 60730-2-6 Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls includingmechanical requirements
2016 CENELEC 0
1398 EN 62424 Representation of process control engineering - Requests in P&I diagrams and data exchange between P&IDtools and PCE-CAE tools
2016 CENELEC 0
1399 EN 60794-5 Optical fibre cables - Part 5: Sectional specification - Microduct cabling for installation by blowing 2016 CENELEC 01400 CLC/TS 50576 Electric cables - Extended application of test results for reaction to fire 2016 CENELEC 01401 EN 62572-3 Fibre optic active components and devices - Reliability standards - Part 3: Laser modules used for telecommunication 2016 CENELEC 01402 EN 62108 Concentrator photovoltaic (CPV) modules and assemblies - Design qualification and type approval 2016 CENELEC 01403 EN 60539-1 Directly heated negative temperature coefficient thermistors - Part 1: Generic specification 2016 CENELEC 01404 EN 62129-1 Calibration of wavelength/optical frequency measurement instruments - Part 1: Optical spectrum analyzers 2016 CENELEC 01405 EN 50632-2-11 Electric motor-operated tools - Dust measurement procedure - Part 2-11: Particular requirements for jig and sabre saws 2016 CENELEC 01406 EN 61249-2-43 Materials for printed boards and other interconnecting structures - Part 2-43: Reinforced base materials clad and unclad -
Non-halogenated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (verticalburning test), co
2016 CENELEC 0
1407 EN 50628 Erection of electrical installations in underground mines 2016 CENELEC 01408 EN 50052 High-voltage switchgear and controlgear - Gas-filled cast aluminium alloy enclosures 2016 CENELEC 01409 EN 60695-1-20 Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General
guidance2016 CENELEC 0
1410 EN 61987-14 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 14: Listsof properties (LOP) for temperature measuring equipment for electronic data exchange
2016 CENELEC 0
1411 EN 60691 Thermal-links - Requirements and application guide 2016 CENELEC 01412 CLC/TS 50131-
2-9Alarm systems - Intrusion and hold-up systems - Part 2-9: Intrusion detectors - Active infrared beam detectors 2016 CENELEC 0
1413 EN 50290-2-35 Communication cables - Part 2-35: Common design rules and construction - Polyamide sheathing compound 2016 CENELEC 01414 EN 60062 Marking codes for resistors and capacitors 2016 CENELEC 01415 EN 61753-381-
2Fibre optic interconnecting devices and passive components - Performance standard - Part 381-2: Cyclic arrayed waveguidegrating - Category C (controlled environment)
2016 CENELEC 0
1416 EN 60603-7-82 Connectors for electronic equipment - Part 7-82: Detail specification for 8-way, 12 contacts, shielded, free and fixedconnectors, for data transmission with frequencies up to 2 000 MHz
2016 CENELEC 0
1417 EN 60730-1 Automatic electrical controls - Part 1: General requirements 2016 CENELEC 01418 EN 62841-2-8 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-8: Particular
requirements for hand-held shears and nibblers2016 CENELEC 0
1419 EN 62820-1-1 Building intercom systems - Part 1-1: System requirements - General 2016 CENELEC 01420 EN 62391-1 Fixed electric double-layer capacitors for use in electric and electronic equipment - Part 1: Generic specification 2016 CENELEC 01421 EN 61300-3-25 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-25:
Examinations and measurements - Concentricity of non-angled ferrules and non-angled ferrules with fibre installed2016 CENELEC 0
1422 EN 60086-3 Primary batteries - Part 3: Watch batteries 2016 CENELEC 01423 EN 62631-3-1 Dielectric and resistive properties of solid insulating materials - Part 3-1: Determination of resistive properties (DC
methods) - Volume resistance and volume resistivity - General method2016 CENELEC 0
1424 EN 61788-4 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sncomposite superconductors
2016 CENELEC 0
1425 EN 60086-5 Primary batteries - Part 5: Safety of batteries with aqueous electrolyte 2016 CENELEC 01426 EN 62621 Railway applications - Fixed installations - Electric traction - Specific requirements for composite insulators used for
overhead contact line systems - Incorporates Amendment A1: 20162016 CENELEC 0
1427 EN 62739-2 Test method for erosion of wave soldering equipment using molten lead-free solder alloy - Part 2: Erosion test method formetal materials with surface processing
2016 CENELEC 0
1428 EN 60079-29-1 Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases 2016 CENELEC 01429 CLC/TR 50417 Safety of household and similar electrical appliances - Interpretations related to European Standards in the EN 60335 series 2016 CENELEC 01430 EN 50436-7 Alcohol interlocks - Test methods and performance requirements - Part 7: Installation document 2016 CENELEC 01431 EN 61753-381-
6Fibre optic interconnecting devices and passive components - Performance standard - Part 381-6: Cyclic arrayed waveguidegrating - Category O (uncontrolled environment)
2016 CENELEC 0
1432 CLC/TR 50542-2
Railway applications - Drivers cab Train Display Controller (TDC) - Part 2: Display systems FIS 2016 CENELEC 0
1433 EN 62317-12 Ferrite cores - Dimensions - Part 12: Ring cores 2016 CENELEC 01434 EN 50411-3-8 Fibre organizers and closures to be used in optical fibre communication systems - Product specifications - Part 3-8: Fibre
management system, terminal equipment box type 1 for category C2016 CENELEC 0
1435 EN 60384-4 Fixed capacitors for use in electronic equipment - Part 4: Sectional specification - Fixed aluminium electrolytic capacitorswith solid (MnO2) and non-solid electrolyte
2016 CENELEC 0
1436 EN 50289-4-16 Communication cables - Specifications for test methods - Part 4- 16: Environmental test methods - Circuit integrity underfire conditions
2016 CENELEC 0
1437 EN 62689-1 Current and voltage sensors or detectors, to be used for fault passage indication purposes - Part 1: General principles andrequirements
2016 CENELEC 0
1438 EN 61196-10 Coaxial communication cables - Part 10: Sectional specification for semi-rigid cables with polytetrafluoroethylene (PTFE)dielectric - Incorporating corrigendum February 2016
2016 CENELEC 0
1439 CLC/TR 50542-3
Railway applications - Drivers cab train Display Controller (TDC) - Part 3: Other train systems FIS 2016 CENELEC 0
1440 EN 60384-14-2 Fixed capacitors for use in electronic equipment Part 14-2: Blank detail specification Fixed capacitors for electromagneticinterference suppression and connection to the supply mains Safety tests only
2016 CENELEC 0
1441 EN 50193-2-1 Electric instantaneous water heaters - Part 2-1: Methods for measuring the performance - Multifunctional electricinstantaneous water heaters
2016 CENELEC 0
1442 EN 50632-2-14 Electric motor-operated tools - Dust measurement procedure - Part 2-14: Particular requirements for planers 2016 CENELEC 01443 EN 62779-1 Semiconductor devices - Semiconductor interface for human body communication - Part 1: General requirements 2016 CENELEC 01444 EN 62838 LEDsi lamps for general lighting services with supply voltages not exceeding 50 V a.c. r.m.s. or 120 V ripple free d.c. -
Safety specifications2016 CENELEC 0
1445 EN 60384-3 Fixed capacitors for use in electronic equipment - Part 3: Sectional specification - Surface mount fixed tantalum electrolyticcapacitors with solid (MnO2) electrolyte
2016 CENELEC 0
1446 EN 62325-351 Framework for energy market communications - Part 351: CIM European market model exchange profile 2016 CENELEC 01447 EN 60317-39 Specifications for particular types of winding wires - Part 39: Glass-fibre braided resin or varnish-impregnated, bare or
enamelled rectangular copper wire, temperature index 1802016 CENELEC 0
1448 EN 50290-2-20 Communication cables - Part 2-20: Common design rules and construction - General 2016 CENELEC 01449 EN 50090-5-3 Home and Building Electronic Systems (HBES) - Part 5-3: Media and media dependent layers - Radio Frequency for
HBES Class 12016 CENELEC 0
1450 EN 61987-21 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 21: Listof Properties (LOP) of automated valves for electronic data exchange - Generic structures
2016 CENELEC 0
1451 EN 60794-1-1 Optical fibre cables - Part 1-1: Generic specification - General 2016 CENELEC 01452 EN 61300-1 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and
guidance2016 CENELEC 0
1453 EN 50193-2-2 Electric instantaneous water heaters - Part 2-2: Performance requirements - Single point of use electric instantaneousshowers - Efficiency
2016 CENELEC 0
1454 EN 62209-1 Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields fromhand-held and body-mounted wireless communication devices - Part 1: Devices used next to the ear (Frequency range of300 MHz to 6 GHz)
2016 CENELEC 0
1455 EN 50527-1 Procedure for the assessment of the exposure to electromagnetic fields of workers bearing active implantable medicaldevices - Part 1: General
2016 CENELEC 0
1456 EN 61987-23 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 23: Listsof Properties (LOPs) of actuators for electronic data exchange
2016 CENELEC 0
1457 EN 62601 Industrial networks - Wireless communication network and communication profiles - WIA-PA 2016 CENELEC 01458 EN 61800-7-
302Adjustable speed electrical power drive systems - Part 7-302: Generic interface and use of profiles for power drive systems- Mapping of profile type 2 to network technologies
2016 CENELEC 0
1459 EN 50341-2-18 Overhead electrical lines exceeding AC 1 kV - Part 2-18: National Normative Aspects (NNA) for Sweden 2016 CENELEC 01460 EN 61703 Mathematical expressions for reliability, availability, maintainability and maintenance support terms 2016 CENELEC 01461 EN 61215-1 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1: Test requirements 2016 CENELEC 01462 EN 61167 Metal halide lamps - Performance specification 2016 CENELEC 01463 CLC/TS 50625-
3-2Collection, logistics & Treatment requirements for WEEE - Part 3-2: Technical specification for de-pollution - Lamps 2016 CENELEC 0
1464 EN 50600-4-3 Information technology - Data centre facilities and infrastructures - Part 4-3: Renewable Energy Factor 2016 CENELEC 01465 EN 62433-4 EMC IC modelling - Part 4: Models of integrated circuits for RF immunity behavioural simulation - Conducted immunity
modelling (ICIM-CI)2016 CENELEC 0
1466 EN 62665 Multimedia systems and equipment - Multimedia e-publishing and e-books technologies - Texture map for auditorypresentation of printed texts
2016 CENELEC 0
1467 EN 62877-2 Electrolyte and water for vented lead acid accumulators - Part 2: Requirements for water 2016 CENELEC 01468 EN 62282-3-
200Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods 2016 CENELEC 0
1469 EN 60793-2-40 Optical fibres - Part 2-40: Product specifications - Sectional specification for category A4 multimode fibres 2016 CENELEC 01470 EN 61754-32 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 32: Type DiaLink
connector family2016 CENELEC 0
1471 EN 60384-1 Fixed capacitors for use in electronic equipment - Part 1: Generic specification 2016 CENELEC 01472 EN 60384-14-1 Fixed capacitors for use in electronic equipment - Part 14-1: Blank detail specification - Fixed capacitors for
electromagnetic interference suppression and connection to the supply mains - Assessment level DZ2016 CENELEC 0
1473 EN 50290-2-29 Communication cables - Part 2-29: Common design rules and construction - Crosslinked polyethylene insulationcompounds: instrumentation, control and field bus cables
2016 CENELEC 0
1474 EN 50667 Information technology - Automated infrastructure management (AIM) systems - Requirements, data exchange andapplications
2016 CENELEC 0
1475 EN 62387 Radiation protection instrumentation - Passive integrating dosimetry systems for individual, workplace and environmentalmonitoring of photon and beta radiation
2016 CENELEC 0
1476 EN 62752 In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) 2016 CENELEC 01477 EN 62803 Transmitting equipment for radiocommunication - Frequency response of optical-to-electric conversion device in
highfrequency radio over fibre systems - Measurement method2016 CENELEC 0
1478 EN 61169-54 Radio-frequency connectors - Part 54: Sectional specification for coaxial connectors with 10 mm inner diameter of outerconductor, nominal characteristic impedance 50 خ_, series 4,3-10
2016 CENELEC 0
1479 EN 62841-2-11 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particularrequirements for hand-held reciprocating saws
2016 CENELEC 0
1480 EN 50632-2-17 Electric motor-operated tools - Dust measurement procedure - Part 2-17: Particular requirements for routers and trimmers 2016 CENELEC 01481 EN 60966-2-4 Radio Frequency and coaxial cable assemblies - Part 2-4: Detail specification for cable assemblies for radio and TV
receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-2 connectors2016 CENELEC 0
1482 EN 60599 Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis 2016 CENELEC 01483 EN 60317-0-4 Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound, resin or varnish
impregnated, bare or enamelled rectangular copper wire2016 CENELEC 0
1484 EN 61340-2-3 Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoidelectrostatic charge accumulation
2016 CENELEC 0
1485 EN 50583-1 Photovoltaics in buildings - Part 1: BIPV modules 2016 CENELEC 01486 EN 61251 Electrical insulating materials and systems - A.C. voltage endurance evaluation 2016 CENELEC 01487 EN 61754-4-
100Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 4-100: Type SCconnector family - Simplified receptacle SC-PC connector interfaces
2016 CENELEC 0
1488 EN 50121-4 Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling andtelecommunications apparatus
2016 CENELEC 0
1489 EN 62153-4-7 Metallic communication cable test methods Part 4-7: Electromagnetic compatibility (EMC) Test method for measuring oftransfer impedance ZT and screening attenuation as or coupling attenuation aC of connectors and assemblies up to andabove 3 GHz Triaxial
2016 CENELEC 0
1490 EN 60793-2-50 Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres 2016 CENELEC 01491 EN 61010-2-
012Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-012: Particularrequirements for climatic and environmental testing and other temperature conditioning equipment
2016 CENELEC 0
1492 EN 50527-2-1 Procedure for the assessment of the exposure to electromagnetic fields of workers bearing active implantable medicaldevices - Part 2-1: Specific assessment for workers with cardiac pacemakers
2016 CENELEC 0
1493 EN 61987-24-1 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-1:Lists of Properties (LOPs) of positioners and I/P converters for electronic data exchange
2016 CENELEC 0
1494 EN 61784-3 Industrial communication networks - Profiles - Part 3: Functional safety fieldbuses - General rules and profile definitions -Incorporates Amendment A1: 2017
2016 CENELEC 0
1495 EN 50600-2-5 Information technology - Data centre facilities and infrastructures - Part 2-5: Security systems 2016 CENELEC 01496 EN 61800-7-
303Adjustable speed electrical power drive systems - Part 7-303: Generic interface and use of profiles for power drive systems- Mapping of profile type 3 to network technologies
2016 CENELEC 0
1497 EN 60700-2 Thyristor valves for high voltage direct current (HVDC) power transmission - Part 2: Terminology 2016 CENELEC 01498 EN 61189-3-
719Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3-719: Testmethods for interconnection structures (printed boards) - Monitoring of single plated-through hole (PTH) resistance changeduring
2016 CENELEC 0
1499 EN 60695-10-3 Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test 2016 CENELEC 01500 EN 62591 Industrial communication networks - Wireless communication network and communication profiles - WirelessHART(tm) 2016 CENELEC 01501 EN 60384-18 Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed aluminium electrolytic surface
mount capacitors with solid (MnO2) and non-solid electrolyte2016 CENELEC 0
1502 EN 62777 Quality evaluation method for the sound field of directional loudspeaker array system 2016 CENELEC 01503 EN 61140 Protection against electric shock - Common aspects for installation and equipment 2016 CENELEC 01504 EN 50310 Telecommunications bonding networks for buildings and other structures 2016 CENELEC 01505 EN 61069-5 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system
assessment - Part 5: Assessment of system dependability2016 CENELEC 0
1506 EN 60317-31 Specifications for particular types of winding wires - Part 31: Glass fibre wound, resin or varnish impregnated, bare orenamelled rectangular copper wire, temperature index 180
2016 CENELEC 0
1507 EN 61076-3-120
Connectors for electronic equipment - Product requirements - Part 3-120: Rectangular connectors - Detail specification forrewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A
2016 CENELEC 0
1508 EN 61800-7-1 Adjustable speed electrical power drive systems - Part 7-1: Generic interface and use of profiles for power drive systems -Interface definition
2016 CENELEC 0
1509 EN 60154-2 Flanges for waveguides - Part 2: Relevant specifications for flanges for ordinary rectangular waveguides 2016 CENELEC 0
1510 EN 60424-1 Ferrite cores - Guidelines on the limits of surface irregularities - Part 1: General specification 2016 CENELEC 01511 EN 60068-3-13 Environmental testing - Part 3-13: Supporting documentation and guidance on Test T - Soldering 2016 CENELEC 01512 EN 50244 Electrical apparatus for the detection of combustible gases in domestic premises - Guide on the selection, installation, use
and maintenance2016 CENELEC 0
1513 EN 62722-1 Luminaire performance - Part 1: General requirements 2016 CENELEC 01514 EN 61753-382-
2Fibre optic interconnecting devices and passive components - Performance standard - Part 382-2: Non-connectorizedsinglemode bidirectional G-PON-NGA WWDM devices for category C - Controlled environment
2016 CENELEC 0
1515 EN 62132-1 Integrated circuits - Measurement of electromagnetic immunity - Part 1: General conditions and definitions 2016 CENELEC 01516 EN 50600-3-1 Information technology - Data centre facilities and infrastructures - Part 3-1: Management and operational information 2016 CENELEC 01517 EN 61069-2 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system
assessment - Part 2: Assessment methodology2016 CENELEC 0
1518 EN 60393-5 Potentiometers for use in electronic equipment - Part 5: Sectional specification - Single-turn rotary low-power wirewoundand nonwirewound potentiometers
2016 CENELEC 0
1519 EN 60958-4-1 Digital audio interface - Part 4-1: Professional applications - Audio content 2016 CENELEC 01520 EN 50632-2-19 Electric motor-operated tools - Dust measurement procedure - Part 2-19: Particular requirements for jointers 2016 CENELEC 01521 EN 62317-6 Ferrite cores - Dimensions - Part 6: ETD-cores for use in power supplies 2016 CENELEC 01522 EN 61853-2 Photovoltaic (PV) module performance testing and energy rating - Part 2: Spectral responsivity, incidence angle and
module operating temperature measurements2016 CENELEC 0
1523 EN 50121-3-2 Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus 2016 CENELEC 01524 EN 60851-4 Winding wires - Test methods - Part 4: Chemical properties 2016 CENELEC 01525 EN 50632-3-9 Electric motor-operated tools - Dust measurement procedure - Part 3-9: Particular requirements for transportable mitre saws 2016 CENELEC 01526 EN 60974-6 Arc welding equipment - Part 6: Limited duty equipment 2016 CENELEC 01527 EN 62618 Radiation protection instrumentation - Spectroscopy-based alarming Personal Radiation Detectors (SPRD) for the detection
of illicit trafficking of radioactive material2016 CENELEC 0
1528 EN 61003-2 Industrial-process control systems - Instruments with analogue inputs and two- or multi-position outputs - Part 2: Guidancefor inspection and routine testing
2016 CENELEC 0
1529 EN 60728-5 Cable networks for television signals, sound signals and interactive services - Part 5: Headend equipment 2016 CENELEC 01530 EN 60534-2-3 Industrial-process control valves - Part 2-3: Flow capacity - Test procedures 2016 CENELEC 01531 EN 61800-7-
304Adjustable speed electrical power drive systems - Part 7-304: Generic interface and use of profiles for power drive systems- Mapping of profile type 4 to network technologies
2016 CENELEC 0
1532 EN 60191-6-13 Mechanical standardization of semiconductor devices - Part 6-13: Design guideline of open-top-type sockets for FinepitchBall Grid Array (FBGA) and Fine-pitch Land Grid Array (FLGA)
2016 CENELEC 0
1533 EN 61914 Cable cleats for electrical installations 2016 CENELEC 01534 EN 61800-7-
201Adjustable speed electrical power drive systems - Part 7-201: Generic interface and use of profiles for power drive systems- Profile type 1 specification
2016 CENELEC 0
1535 EN 60335-2-3 Household and similar electrical appliances - Safety - Part 2-3: Particular requirements for electric irons 2016 CENELEC 01536 EN 62660-3 Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 3: Safety requirements 2016 CENELEC 01537 EN 50341-2-23 Overhead electrical lines exceeding AC 1 kV - Part 2-23: National Normative Aspects (NNA) for SLOVAKIA (based on
EN 50341-1:2012)2016 CENELEC 0
1538 EN 62722-2-1 Luminaire performance - Part 2-1: Particular requirements for LED luminaires 2016 CENELEC 01539 EN 62343-4-1 Dynamic modules - Part 4-1: Software and hardware interface - 1 x 9 wavelength selective switch 2016 CENELEC 01540 EN 61987-12 Industrial- Process Measurement and Control - Data Structures and Elements in Process Equipment Catalogues - Part 12:
Lists of properties (LOPs) for flow measuring equipment for electronic data exchange2016 CENELEC 0
1541 EN 61804-4 Function blocks (FB) for process control and Electronic Device Description Language (EDDL) - Part 4: EDD interpretation 2016 CENELEC 01542 EN 62575-1 Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality - Part 1: Generic specification 2016 CENELEC 0
1543 EN 50290-2-37 Communication cables - Part 2-37: Common design rules and construction - Polyethylene insulation for coaxial cables 2016 CENELEC 01544 EN 60965 Nuclear power plants - Control rooms - Supplementary control room for reactor shutdown without access to the main
control room2016 CENELEC 0
1545 EN 50561-3 Power line communication apparatus used in low-voltage installations - Radio disturbance characteristics - Limits andmethods of measurement - Part 3: Apparatus operating above 30 MHz
2016 CENELEC 0
1546 EN 61069-6 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of systemassessment - Part 6: Assessment of system operability
2016 CENELEC 0
1547 EN 61290-4-1 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method 2016 CENELEC 01548 EN 60695-1-21 Fire hazard testing - Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary
and relevance of test methods2016 CENELEC 0
1549 EN 60317-32 Specifications for particular types of winding wires - Part 32: Glass fibre wound, resin or varnish impregnated, bare orenamelled rectangular copper wire, temperature index 155
2016 CENELEC 0
1550 EN 62231-1 Composite station post insulators for substations with AC voltages greater than 1 000 V up to 245 kV - Part 1:Dimensional, mechanical and electrical characteristics
2016 CENELEC 0
1551 EN 62702-1-1 Audio Archive System - Part 1-1: DVD disk and data migration for long term audio data storage 2016 CENELEC 01552 EN 61094-3 Electroacoustics - Measurement microphones - Part 3: Primary method for free-field calibration of laboratory standard
microphones by the reciprocity technique2016 CENELEC 0
1553 EN 61227 Nuclear power plants - Control rooms - Operator controls 2016 CENELEC 01554 EN 61189-5-1 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-1: General
test methods for materials and assemblies - Guidance for printed board assemblies2016 CENELEC 0
1555 EN 60195 Method of measurement of current noise generated in fixed resistors 2016 CENELEC 01556 EN 62631-3-2 Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC
Methods) - Surface resistance and surface resistivity2016 CENELEC 0
1557 EN 61982-4 Secondary batteries (except lithium) for the propulsion of electric road vehicles - Part 4: Safety requirements of nickel-metal hydride cells and modules
2016 CENELEC 0
1558 EN 62056-7-5 Electricity metering data exchange - The DLMS/COSEM suite - Part 7-5: Local data transmission profiles for LocalNetworks (LN)
2016 CENELEC 0
1559 EN 60793-2-20 Optical fibres - Part 2-20: Product specifications - Sectional specification for category A2 multimode fibres 2016 CENELEC 01560 EN 60424-4 Ferrite cores - Guidelines on the limits of surface irregularities - Part 4: Ring-cores 2016 CENELEC 01561 EN 62788-1-4 Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical
transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength2016 CENELEC 0
1562 EN 61069-3 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of systemassessment - Part 3: Assessment of system functionality
2016 CENELEC 0
1563 EN 60958-4-4 Digital audio interface - Part 4-4: Professional applications - Physical and electrical parameters 2016 CENELEC 01564 EN 60958-4-2 Digital audio interface - Part 4-2: Professional applications - Metadata and subcode 2016 CENELEC 01565 EN 60393-6 Potentiometers for use in electronic equipment - Part 6: Sectional specification - Surface mount preset potentiometers 2016 CENELEC 01566 EN 61466-1 Composite string insulator units for overhead lines with a nominal voltage greater than 1000 V - Part 1: Standard strength
classes and end fittings2016 CENELEC 0
1567 EN 62056-4-7 Electricity metering data exchange - The DLMS/COSEM suite - Part 4-7: DLMS/COSEM transport layer for IP networks 2016 CENELEC 01568 CLC/TS 61643-
22Low-voltage surge protective devices - Part 22: Surge protective devices connected to telecommunications and signallingnetworks - Selection and application principles
2016 CENELEC 0
1569 EN 60350-1 Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuringPerformance
2016 CENELEC 0
1570 EN 62087-3 Audio, video, and related equipment - Determination of power consumption - Part 3: Television sets 2016 CENELEC 01571 EN 62694 Radiation protection instrumentation - Backpack-type radiation detector (BRD) for the detection of illicit trafficking of
radioactive material2016 CENELEC 0
1572 EN 62952-2 Power sources for a wireless communication device - Part 2: Profile for power modules with batteries 2016 CENELEC 01573 EN 62864-1 Railway applications - Rolling stock - Power supply with onboard energy storage system - Part 1: Series hybrid system 2016 CENELEC 01574 EN 61076-3-
110Connectors for electronic equipment - Product requirements - Part 3-110: Detail specification for free and fixed connectorsfor data transmission with frequencies up to 3 000 MHz
2016 CENELEC 0
1575 EN 61754-6-100
Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 6-100: Type MUconnector family - Simplified receptacle MU-PC connector interfaces
2016 CENELEC 0
1576 EN 61800-7-202
Adjustable speed electrical power drive systems - Part 7-202: Generic interface and use of profiles for power drive systems- Profile type 2 specification
2016 CENELEC 0
1577 EN 61340-4-9 Electrostatics - Part 4-9: Standard test methods for specific applications - Garments 2016 CENELEC 01578 EN 61869-6 Instrument transformers - Part 6: Additional general requirements for low-power instrument transformers 2016 CENELEC 01579 EN 61669 Electroacoustics - Measurement of real-ear acoustical performance characteristics of hearing aids 2016 CENELEC 01580 EN 62264-4 Enterprise-control system integration - Part 4: Object model attributes for manufacturing operations management
integration2016 CENELEC 0
1581 EN 62631-3-3 Dielectric and resistive properties of solid insulating materials - Part 3-3: Determination of resistive properties (DCMethods) - Insulation resistance
2016 CENELEC 0
1582 EN 60076-10 Power Transformers Part 10: Determination of Sound Levels 2016 CENELEC 01583 EN 61754-31 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 31: Type N-FO
connector family2016 CENELEC 0
1584 EN 60793-2 Optical fibres - Part 2: Product specifications - General 2016 CENELEC 01585 EN 62047-26 Semiconductor devices - Micro-electromechanical devices - Part 26: Description and measurement methods for micro
trench and needle structures2016 CENELEC 0
1586 EN 55011 Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods ofmeasurement - Incorporates Amendment A1: 2017
2016 CENELEC 0
1587 EN 62047-25 Semiconductor devices - Micro-electromechanical devices - Part 25: Silicon based MEMS fabrication technology -Measurement method of pull-press and shearing strength of micro bonding area
2016 CENELEC 0
1588 EN 50582 Procedure to assess the circuit integrity of optical fibres in a cable under resistance to fire testing 2016 CENELEC 01589 EN 62822-2 Electric welding equipment - Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300
GHz) - Part 2: Arc welding equipment2016 CENELEC 0
1590 EN 62779-2 Semiconductor devices - Semiconductor interface for human body communication - Part 2: Characterization of interfacingperformances
2016 CENELEC 0
1591 EN 61987-13 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 13: Listsof properties (LOP) for Pressure Measuring Equipment for electronic data exchange
2016 CENELEC 0
1592 EN 62361-100 Power systems management and associated information exchange - Interoperability in the long term - Part 100: CIMprofiles to XML schema mapping
2016 CENELEC 0
1593 EN 60317-33 Specifications for particular types of winding wires - Part 33: Glass fibre wound, resin or varnish impregnated, bare orenamelled rectangular copper wire, temperature index 200
2016 CENELEC 0
1594 EN 61069-7 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of systemassessment - Part 7: Assessment of system safety
2016 CENELEC 0
1595 EN 50152-3-3 Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3-3: Measurement, control andprotection devices for specific use in a.c. traction systems - Voltage transformers
2016 CENELEC 0
1596 EN 61300-2-47 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47: Tests -Thermal shocks
2016 CENELEC 0
1597 EN 50604-1 Secondary lithium batteries for light EV (electric vehicle) applications - Part 1: General safety requirements and testmethods
2016 CENELEC 0
1598 EN 61180 High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment 2016 CENELEC 01599 EN 60034-27-3 Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating
electrical machines2016 CENELEC 0
1600 EN 50289-1-11 Communication cables - Specifications for test methods - Part 1-11: Electrical test methods - Characteristic impedance,input impedance, return loss
2016 CENELEC 0
1601 EN 60794-3-20 Optical fibre cables - Part 3-20: Outdoor cables - Family specification for self-supporting aerial telecommunication cables 2016 CENELEC 01602 EN 62077 Fibre optic interconnecting devices and passive components - Fibre optic circulators - Generic specification 2016 CENELEC 01603 EN 61755-3-32 Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-32: Connector
parameters of non-dispersion shifted single mode physically contacting fibres - Angled thermoset epoxy rectangularferrules
2016 CENELEC 0
1604 EN 61829 Photovoltaic (PV) array - On-site measurement of currentvoltage characteristics 2016 CENELEC 01605 EN 62808 Nuclear power plants - Instrumentation and control systems important to safety - Design and qualification of isolation
devices2016 CENELEC 0
1606 EN 61968-8 Application integration at electric utilities - System interfaces for distribution management - Part 8: Interfaces for customeroperations
2016 CENELEC 0
1607 EN 50632-2-3 Electric motor-operated tools - Dust measurement procedure - Part 2-3: Particular requirements for concrete grinders anddisktype sanders
2016 CENELEC 0
1608 EN 60401-3 Terms and nomenclature for cores made of magnetically soft ferrites - Part 3: Guidelines on the format of data appearing inmanufacturers catalogues of transformer and inductor cores
2016 CENELEC 0
1609 EN 61069-1 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of systemassessment - Part 1: Terminology and basic concepts
2016 CENELEC 0
1610 EN 62343-3-2 Dynamic modules - Part 3-2: Performance specification templates - Optical channel monitor 2016 CENELEC 01611 EN 61189-2-
719Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2-719: Testmethods for materials for interconnection structures - Relative permittivity and loss tangent (500 MHz to 10 GHz)
2016 CENELEC 0
1612 EN 50242 Electric dishwashers for household use - Methods for measuring the performance 2016 CENELEC 01613 EN 61968-6 Application integration at electric utilities - System interfaces for distribution management - Part 6: Interfaces for
maintenance and construction2016 CENELEC 0
1614 EN 62610-5 Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC60297 and IEC 60917 series - Part 5: Cooling performance evaluation for indoor cabinets
2016 CENELEC 0
1615 EN 62087-1 Audio, video, and related equipment - Determination of power consumption - Part 1: General 2016 CENELEC 01616 EN 61058-2-6 Switches for appliances - Part 2-6: Particular requirements for switches used in electric motor-operated hand-held tools,
transportable tools and lawn and garden machinery2016 CENELEC 0
1617 EN 62952-1 Power sources for a wireless communication device - Part 1: General requirements of power modules 2016 CENELEC 01618 EN 61800-7-
203Adjustable speed electrical power drive systems - Part 7-203: Generic interface and use of profiles for power drive systems- Profile type 3 specification
2016 CENELEC 0
1619 EN 50632-3-1 Electric motor-operated tools - Dust measurement procedure - Part 3-1: Particular requirements for transportable table saws 2016 CENELEC 01620 EN 61069-4 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system
assessment - Part 4: Assessment of system performance2016 CENELEC 0
1621 EN 60909-0 Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents 2016 CENELEC 01622 EN 61515 Mineral insulated metal-sheathed thermocouple cables and thermocouples 2016 CENELEC 01623 EN 61970-552 Energy management system application program interface (EMS-API) - Part 552: CIMXML Model exchange format 2016 CENELEC 01624 EN 61069-8 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system
assessment - Part 8: Assessment of other system properties2016 CENELEC 0
1625 EN 62533 Radiation protection instrumentation - Highly sensitive hand-held instruments for photon detection of radioactive material 2016 CENELEC 01626 EN 60393-2 Potentiometers for use in electronic equipment - Part 2: Sectional specification - Lead-screw actuated and rotary preset
potentiometers2016 CENELEC 0
1627 EN 61094-5 Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphonesby comparison
2016 CENELEC 0
1628 EN 50193-1 Electric instantaneous water heaters - Methods for measuring the Performance - Part 1: General requirements 2016 CENELEC 0
1629 CLC/TR 50670 External fire exposure to roofs in combination with photovoltaic (PV) arrays - Test method(s) 2016 CENELEC 01630 CLC/TS 50612 Portable electrical apparatus for the measurement of combustion flue gas parameters - Guide to their use in the process of
commissioning, servicing and maintaining gas fired appliances2016 CENELEC 0
1631 EN 62849 Performance evaluation methods of mobile household robots 2016 CENELEC 01632 EN 50600-4-1 Information technology - Data centre facilities and infrastructures - Part 4-1: Overview of and general requirements for key
performance indicators2016 CENELEC 0
1633 EN 60297-3-109
Mechanical structures for electrical and electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19in) series - Part 3-109: Dimensions of chassis for embedded computing devices
2016 CENELEC 0
1634 EN 60424-2 Ferrite cores - Guidelines on the limits of surface irregularities - Part 2: RM-cores 2016 CENELEC 01635 EN 50152-3-2 Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3-2: Measurement, control and
protection devices for specific use in a.c. traction systems - Current transformers2016 CENELEC 0
1636 EN 50633 Railway applications - Fixed installations - Protection principles for AC and DC electric traction systems 2016 CENELEC 01637 EN 62772 Composite Hollow Core Station Post Insulators for substations with a.c. voltage greater than 1000 V and d.c. voltage
greater than 1500V- Definitions, test methods and acceptance criteria2016 CENELEC 0
1638 CLC/TS 50131-12
Alarm systems - Intrusion and hold-up systems - Part 12: Methods and requirements for setting and unsetting of IntruderAlarm Systems (IAS)
2016 CENELEC 0
1639 CLC/TS 50459-3
Railway applications - Communication, signalling and processing systems - European Rail Traffic Management System -Driver- Machine Interface - Part 3: Ergonomic arrangements of non ETCS information
2016 CENELEC 0
1640 EN 50583-2 Photovoltaics in buildings - Part 2: BIPV systems 2016 CENELEC 01641 EN 61260-2 Electroacoustics - Octave-band and fractional-octave-band filters - Part 2: Pattern-evaluation tests - Incorporates
Amendment A1: 20172016 CENELEC 0
1642 EN 62326-20 Printed boards - Part 20: Printed circuit boards for highbrightness LEDs 2016 CENELEC 01643 EN 61215-1-1 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-1: Special requirements for testing
of crystalline silicon photovoltaic (PV) Modules2016 CENELEC 0
1644 EN 62087-4 Audio, video and related equipment - Determination of power consumption - Part 4: Video recording equipment 2016 CENELEC 01645 EN 62827-1 Wireless Power Transfer - Management - Part 1: Common Components 2016 CENELEC 01646 EN 61260-3 Electroacoustics - Octave-band and fractional-octave-band filters - Part 3: Periodic tests 2016 CENELEC 01647 EN 61400-13 Wind turbines - Part 13: Measurement of mechanical loads 2016 CENELEC 01648 EN 61800-7-
301Adjustable speed electrical power drive systems - Part 7-301: Generic interface and use of profiles for power drive systems- Mapping of profile type 1 to network technologies
2016 CENELEC 0
1649 EN 61753-052-6
Fibre optic interconnecting devices and passive components - Performance standard - Part 052-6: Single-mode fibrenonconnectorized fixed attenuator - Category O in outside plant environment
2016 CENELEC 0
1650 EN 61169-58 Radio-frequency connectors - Part 58: Sectional specification for RF coaxial connectors with blind-mate coupling -Characteristic impedance 50 خ_ (type SBMA)
2016 CENELEC 0
1651 EN 61300-2-37 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-37: Tests -Cable bending for fibre optic closures
2016 CENELEC 0
1652 EN 50290-2-38 Communication cables - Part 2-38: Common design rules and construction - Polypropylene insulation for coaxial cables 2016 CENELEC 01653 EN 62605 Multimedia systems and equipment - Multimedia e-publishing and e-books - Interchange format for e-dictionaries 2016 CENELEC 01654 EN 62718 Railway applications - Rolling stock - DC supplied electronic ballasts for lighting fluorescent lamps 2016 CENELEC 01655 EN 60154-1 Flanges for waveguides - Part 1: General requirements 2016 CENELEC 01656 EN 61162-1 Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and
multiple listeners2016 CENELEC 0
1657 EN 62625-2 Electronic railway equipment - On board driving data recording system - Part 2: Conformity testing 2016 CENELEC 01658 EN 60702-3 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 3: Guidance for use 2016 CENELEC 01659 EN 60758 Synthetic quartz crystal - Specifications and guidelines for use 2016 CENELEC 0
1660 EN 61000-1-2 Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety ofelectrical and electronic systems including equipment with regard to electromagnetic phenomena
2016 CENELEC 0
1661 EN 60127-7 Miniature fuses - Part 7: Miniature fuse-links for special applications 2016 CENELEC 01662 EN 60068-2-39 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with
low air pressure tests2016 CENELEC 0
1663 EN 62052-31 Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 31: Product safetyrequirements and tests
2016 CENELEC 0
1664 EN 60153-1 Hollow metallic waveguides - Part 1: General requirements and measuring methods 2016 CENELEC 01665 EN 60669-2-5 Switches for household and similar fixed electrical installations - Part 2-5: Particular requirements - Switches and related
accessories for use in home and building electronic systems (HBES)2016 CENELEC 0
1666 EN 80369-5 Small-bore connectors for liquids and gases in healthcare applications - Part 5: Connectors for limb cuff inflationapplications
2016 CENELEC 0
1667 EN 50632-2-5 Electric motor-operated tools - Dust measurement procedure - Part 2-5: Particular requirements for circular saws 2016 CENELEC 01668 EN 61291-2 Optical amplifiers - Part 2: Single channel applications - Performance specification template 2016 CENELEC 01669 CLC/TR 50656 SPD application in conjunction with Class II equipment 2016 CENELEC 01670 EN 60456 Clothes washing machines for household use - Methods for measuring the performance 2016 CENELEC 01671 EN 50600-4-2 Information technology - Data centre facilities and infrastructures - Part 4-2: Power Usage Effectiveness 2016 CENELEC 01672 EN 62276 Single crystal wafers for surface acoustic wave (SAW) device applications - Specifications and measuring methods 2016 CENELEC 01673 EN 62220-1-1 Medical electrical equipment - Characteristics of digital x-ray imaging devices - Part 1-1: Determination of the detective
quantum efficiency - Detectors used in radiographic imaging2015 CENELEC 0
1674 EN 62734 Industrial networks - Wireless communication network and communication profiles - ISA 100.11a 2015 CENELEC 01675 EN 61837-4 Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead
connections - Part 4: Hybrid enclosure outlines2015 CENELEC 0
1676 EN 62744 Representation of states of objects by graphical symbols 2015 CENELEC 01677 EN 50341-2-19 Overhead electrical lines exceeding AC 1 kV - Part 2-19: National Normative Aspects (NNA) for CZECH REPUBLIC
(based on EN 50341-1:2012)2015 CENELEC 0
1678 EN 60601-2-62 Medical electrical equipment - Part 2-62: Particular requirements for the basic safety and essential performance of highintensity therapeutic ultrasound (HITU) equipment
2015 CENELEC 0
1679 CLC/TS 50590 Electricity metering data exchange - Lower layer PLC profile using Adaptive Multi Carrier Spread-Spectrum (AMC-SS)modulation
2015 CENELEC 0
1680 EN 60079-28 Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation 2015 CENELEC 01681 EN 60940 Guidance information on the application of capacitors, resistors, inductors and complete filter units for electromagnetic
interference suppression2015 CENELEC 0
1682 EN 62790 Junction boxes for photovoltaic modules - Safety requirements and tests 2015 CENELEC 01683 EN 61557-8 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring
or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems2015 CENELEC 0
1684 EN 60404-8-1 Magnetic materials - Part 8-1: Specifications for individual materials - Magnetically hard materials 2015 CENELEC 01685 EN 61010-2-
081Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particularrequirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
2015 CENELEC 0
1686 EN 62320-1 Maritime navigation and radiocommunication equipment and systems - Automatic identification system (AIS) - Part 1: AISBase Stations - Minimum operational and performance requirements, methods of testing and required test results
2015 CENELEC 0
1687 EN 50288-10-2 Multi-element metallic cables used in analogue and digital communication and control - Part 10-2: Sectional specificationfor screened cables characterized from 1 MHz up to 500 MHz for work area, patch cord and data centre applications
2015 CENELEC 0
1688 EN 50377-17-2 Connector sets and Interconnect components to be used in optical fibre communication systems - Product specifications -Part 17-2: Type FPFT (factory polished field terminated) simplex connector factory terminated with EN 60793-2-50category B1.3 fibre an
2015 CENELEC 0
1689 EN 61810-1 Electromechanical elementary relays - Part 1: General and safety requirements 2015 CENELEC 01690 EN 60793-1-50 Optical fibres - Part 1-50: Measurement methods - Damp heat (steady state) tests 2015 CENELEC 01691 EN 60068-2-58 Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization
and to soldering heat of surface mounting devices (SMD) - Incorporates Amendment A1: 20182015 CENELEC 0
1692 EN 62769-6 Field Device Integration (FDI) - Part 6: FDI Technology Mapping 2015 CENELEC 01693 EN 62271-3 High-voltage switchgear and controlgear - Part 3: Digital interfaces based on IEC 61850 2015 CENELEC 01694 EN 62541-9 OPC unified architecture - Part 9: Alarms and conditions 2015 CENELEC 01695 EN 62150-3 Fibre optic active components and devices - Test and measurement procedures - Part 3: Optical power variation induced by
mechanical disturbance in optical receptacles and transceiver interfaces2015 CENELEC 0
1696 EN 60601-2-17 Medical electrical equipment - Part 2-17: Particular requirements for the basic safety and essential performance ofautomatically-controlled brachytherapy afterloading equipment
2015 CENELEC 0
1697 EN 60079-29-2 Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammablegases and oxygen
2015 CENELEC 0
1698 EN 61810-3 Electromechanical elementary relays - Part 3: Relays with forcibly guided (mechanically linked) contacts 2015 CENELEC 01699 EN 50625-2-2 Collection, logistics & Treatment requirements for WEEE - Part 2-2: Treatment requirements for WEEE containing
CRTs and flat panel displays2015 CENELEC 0
1700 EN 60862-1 Surface acoustic wave (SAW) filters of assessed quality - Part 1: Generic specification 2015 CENELEC 01701 EN 60086-1 Primary batteries - Part 1: General 2015 CENELEC 01702 EN 62776 Double-capped LED lamps designed to retrofit linear fluorescent lamps - Safety specifications 2015 CENELEC 01703 EN 60875-1 Fibre optic interconnecting devices and passive components - Non-wavelength-selective fibre optic branching devices -
Part 1: Generic specification2015 CENELEC 0
1704 EN 50342-6 Lead-acid starter batteries - Part 6: Batteries for Micro-Cycle Applications 2015 CENELEC 01705 EN 62317-13 Ferrite cores - Dimensions - Part 13: PQ-cores for use in power supply applications 2015 CENELEC 01706 EN 61375-2-3 Electronic railway equipment - Train communication network (TCN) - Part 2-3: TCN communication profile - Incorporates
Amendment A1: 20172015 CENELEC 0
1707 EN 60885-3 Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurements on lengths of extrudedpower cables
2015 CENELEC 0
1708 EN 45544-2 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxicgases and vapours - Part 2: Performance requirements for apparatus used for exposure measurement
2015 CENELEC 0
1709 EN 61557-16 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuringor monitoring of protective measures - Part 16: Equipment for testing the effectiveness of the protective measures ofelectrical e
2015 CENELEC 0
1710 EN 60836 Specifications for unused silicone insulating liquids for electrotechnical purposes 2015 CENELEC 01711 EN 60512-29-
100Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 500 MHz on M12style connectors - Tests 29a to 29g
2015 CENELEC 0
1712 EN 61082-1 Preparation of documents used in electrotechnology - Part 1: Rules 2015 CENELEC 01713 EN 62379-3 Common control interface for networked digital audio and video products - Part 3: Video 2015 CENELEC 01714 EN 61340-4-6 Electrostatics - Part 4-6: Standard test methods for specific applications - Wrist straps 2015 CENELEC 01715 EN 62769-103-
1Field Device Integration (FDI) - Part 103-1: Profiles - PROFIBUS 2015 CENELEC 0
1716 EN 140402 Blank Detail Specification: Fixed low power wirewound surface mount (SMD) resistors - Incorporates Amendment A1:2016
2015 CENELEC 0
1717 EN 60601-2-3 Medical electrical equipment - Part 2-3: Particular requirements for the basic safety and essential performance of short-wave therapy equipment - Incorporates Amendment A1: 2016
2015 CENELEC 0
1718 EN 61557-9 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuringor monitoring of protective measures - Part 9: Equipment for insulation fault location in IT systems
2015 CENELEC 0
1719 CLC/TS 52056-8-4
Electricity metering data exchange - The DLMS/COSEM suite - Part 8-4: Narrow-band OFDM PRIME PLCcommunication profile for neighbourhood networks
2015 CENELEC 0
1720 EN 62634 Radio data system (RDS) - Receiver products and characteristics - Methods of Measurement 2015 CENELEC 01721 EN 62878-1-1 Device embedded substrate - Part 1-1: Generic specification - Test methods 2015 CENELEC 01722 EN 61162-460 Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 460: Multiple talkers and
multiple listeners - Ethernet interconnection - Safety and security - Remains Current2015 CENELEC 0
1723 EN 61169-51 Radio-frequency connectors - Part 51: Sectional specification for RF coaxial connectors with inner diameter of outerconductors 13,5 mm with bayonet lock - Characteristic impedance 50 O (type QLI)
2015 CENELEC 0
1724 EN 50200 Method of test for resistance to fire of unprotected small cables for use in emergency circuits 2015 CENELEC 01725 EN 62841-1 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General
requirements - Incorporating corrigendum October 20152015 CENELEC 0
1726 EN 60601-2-63 Medical electrical equipment - Part 2-63: Particular requirements for the basic safety and essential performance of dentalextraoral X-ray equipment
2015 CENELEC 0
1727 EN IEC 60079-7
Explosive atmospheres Part 7: Equipment protection by increased safety "e" - Incorporates Amendment A1: 2018 2015 CENELEC 0
1728 EN 62680-2-1 Universal Serial Bus interfaces for data and power - Part 2-1: Universal Serial Bus Specification, Revision 2.0 (TA 14) 2015 CENELEC 01729 EN 60335-2-95 Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving
garage doors for residential use - Incorporates Amendment A1: 20152015 CENELEC 0
1730 EN 50341-2-7 Overhead electrical lines exceeding AC 1 kV - Part -2-7: National Normative Aspects (NNA) for FINLAND 2015 CENELEC 01731 EN 62320-3 Maritime navigation and radiocommunication equipment and systems - Automatic identification systems (AIS) - Part 3:
Repeater stations - Minimum operational and performance requirements - Methods of test and required test results2015 CENELEC 0
1732 EN 62842 File allocation system with minimized reallocation for multimedia home server (TA 8) 2015 CENELEC 01733 EN 50598-3 Ecodesign for power drive systems, motor starters, power electronics and their driven applications - Part 3: Quantitative eco
design approach through life cycle assessment including product category rules and the content of environmentaldeclarations
2015 CENELEC 0
1734 EN 50288-9-2 Multi-element metallic cables used in analogue and digital communication and control - Part 9-2: Sectional specificationfor screened cables characterized from 1 MHz up to 1 000 MHz for work area, patch cord and data centre applications
2015 CENELEC 0
1735 EN 62769-4 Field Device Integration (FDI) - Part 4: FDI Packages 2015 CENELEC 01736 EN 60335-2-5 Household and similar electrical appliances - Safety - Part 2-5: Particular requirements for dishwashers 2015 CENELEC 01737 EN 62026-3 Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet 2015 CENELEC 01738 EN 50393 Test methods and requirements for accessories for use on distribution cables of rated voltage 0,6/1,0 (1,2) kV 2015 CENELEC 01739 EN 61174 Maritime navigation and radiocommunication equipment and systems - Electronic chart display and information system
(ECDIS) - Operational and performance requirements, methods of testing and required test results2015 CENELEC 0
1740 EN 60809 Lamps for road vehicles - Dimensional, electrical and luminous requirements - Incorporates Amendment A2: 2018 2015 CENELEC 01741 EN 50617-2 Railway Applications - Technical parameters of train detection systems for the interoperability of the trans-European
railway system - Part 2: Axle counters2015 CENELEC 0
1742 EN 61290-1-3 Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method 2015 CENELEC 01743 EN 60601-2-25 Medical electrical equipment - Part 2-25: Particular requirements for the basic safety and essential performance of
electrocardiographs2015 CENELEC 0
1744 EN 62680-2-2 Universal Serial Bus interfaces for data and power - Part 2-2: Universal Serial Bus - Micro-USB Cables and ConnectorsSpecification, Revision 1.01 (TA 14)
2015 CENELEC 0
1745 EN 62053-24 Electricity metering equipment (a.c.) - Particular requirements - Part 24: Static meters for reactive energy at fundamentalfrequency (classes 0,5 S, 1 S and 1) - Incorporates Amendment A1: 2017
2015 CENELEC 0
1746 EN 62680-1-1 Universal Serial Bus interfaces for data and power - Part 1-1: Universal Serial Bus interfaces - Common components - USBBattery Charging Specification, Revision 1.2 (TA 14)
2015 CENELEC 0
1747 EN 62570 Standard practice for marking medical devices and other items for safety in the magnetic resonance environment 2015 CENELEC 0
1748 EN 62087-6 Audio, video and related equipment - Determination of power consumption - Part 6: Audio equipment 2015 CENELEC 01749 EN 62343-1-2 Dynamic modules - Part 1-2: Performance standards - Tuneable chromatic dispersion compensator (non-connectorized) 2015 CENELEC 01750 EN 60601-2-23 Medical electrical equipment - Part 2-23: Particular requirements for the basic safety and essential performance of
transcutaneous partial pressure monitoring equipment2015 CENELEC 0
1751 EN 80601-2-58 Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lensremoval devices and vitrectomy devices for ophthalmic surgery
2015 CENELEC 0
1752 EN 61811-1 Electromechanical telecom elementary relays of assessed quality - Part 1: Generic specification and blank detailspecification
2015 CENELEC 0
1753 EN 45544-1 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxicgases and vapours - Part 1: General requirements and test methods
2015 CENELEC 0
1754 EN 60601-2-10 Medical electrical equipment - Part 2-10: Particular requirements for the basic safety and essential performance of nerveand muscle stimulators - Incorporates Amendment A1: 2016
2015 CENELEC 0
1755 EN 62106 Specification of the radio data system (RDS) for VHF/FM sound broadcasting in the frequency range from 87,5 MHz to108,0 MHz
2015 CENELEC 0
1756 EN 61169-52 Radio-frequency connectors - Part 52: Sectional specification for series MMCX RF coaxial connectors 2015 CENELEC 01757 EN 62007-1 Semiconductor optoelectronic devices for fibre optic system applications - Part 1: Specification template for essential
ratings and characteristics2015 CENELEC 0
1758 EN 50223 Stationary electrostatic application equipment for ignitable flock material - Safety requirements 2015 CENELEC 01759 EN 62656-1 Standardized product ontology register and transfer by spreadsheets - Part 1: Logical structure for data parcels 2015 CENELEC 01760 EN 62541-3 OPC unified architecture - Part 3: Address Space Model 2015 CENELEC 01761 EN 62321-6 Determination of certain substances in electrotechnical products - Part 6: Polybrominated biphenyls and polybrominated
diphenyl ethers in polymers by gas chromatography-mass spectrometry (GC-MS)2015 CENELEC 0
1762 EN 50180-1 Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 1: General requirementsfor bushings
2015 CENELEC 0
1763 EN 60068-2-60 Environmental testing - Part 2-60: Tests - Test Ke: Flowing mixed gas corrosion test 2015 CENELEC 01764 EN 62604-1 Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality - Part 1: Generic specification 2015 CENELEC 01765 EN 62769-2 Field Device Integration (FDI) - Part 2: FDI Client 2015 CENELEC 01766 EN 50617-1 Railway applications - Technical parameters of train detection systems for the interoperability of the trans-European
railway system - Part 1: Track circuits2015 CENELEC 0
1767 EN 50405 Railway applications - Current collection systems - Pantographs, testing methods for contact strips - IncorporatesAmendment A1: 2016
2015 CENELEC 0
1768 EN 60601-1-11 Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance - CollateralStandard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcareenvironment
2015 CENELEC 0
1769 EN 62714-2 Engineering data exchange format for use in industrial automation systems engineering - Automation markup language -Part 2: Role class libraries
2015 CENELEC 0
1770 EN 60172 Test procedure for the determination of the temperature index of enamelled and tape wrapped winding wires 2015 CENELEC 01771 EN 60601-2-66 Medical electrical equipment - Part 2-66: Particular requirements for the basic safety and essential performance of hearing
instruments and hearing instrument systems2015 CENELEC 0
1772 EN 60601-2-49 Medical electrical equipment - Part 2-49: Particular requirements for the basic safety and essential performance ofmultifunction patient monitoring equipment
2015 CENELEC 0
1773 EN 60318-3 Electroacoustics - Simulators of human head and ear - Part 3: Acoustic coupler for the calibration of supra-aural earphonesused in audiometry
2015 CENELEC 0
1774 EN 50270 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases oroxygen
2015 CENELEC 0
1775 EN 60519-1 Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements 2015 CENELEC 0
1776 EN 55016-1-5 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance andimmunity measuring apparatus - Antenna calibration sites and reference test sites for 5 MHz to 18 GHz - IncorporatesAmendment A1: 2017
2015 CENELEC 0
1777 EN 62484 Radiation protection instrumentation - Spectroscopy-based portal monitors used for the detection and identification of illicittrafficking of radioactive material
2015 CENELEC 0
1778 EN 60705 Household microwave ovens - Methods for measuring performance 2015 CENELEC 01779 EN 55016-1-6 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-6: Radio disturbance and
immunity measuring apparatus - EMC antenna calibration - Incorporates Amendment A1: 20172015 CENELEC 0
1780 EN 60079-26 Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga 2015 CENELEC 01781 EN 61290-1-1 Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method 2015 CENELEC 01782 EN 50632-2-1 Electric motor-operated tools - Dust measurement procedure - Part 2-1: Particular requirements for diamond core drills 2015 CENELEC 01783 EN 60079-32-2 Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests 2015 CENELEC 01784 EN 62811 AC and/or DC-supplied electronic controlgear for discharge lamps (excluding fluorescent lamps) - Performance
requirements for low frequency squarewave operation2015 CENELEC 0
1785 EN 62769-5 Field Device Integration (FDI) - Part 5: FDI Information Model 2015 CENELEC 01786 CLC/TR 60079-
32-1Explosive atmospheres - Part 32-1: Electrostatic Hazards - Guidance 2015 CENELEC 0
1787 EN 62541-8 OPC unified architecture - Part 8: Data Access 2015 CENELEC 01788 EN 50341-2-20 Overhead electrical lines exceeding AC 45 kV - Part 2-20: National Normative Aspects (NNA) for ESTONIA (based on
EN 50341-1:2012)2015 CENELEC 0
1789 EN 60598-2-5 Luminaires - Part 2-5: Particular requirements - Floodlights 2015 CENELEC 01790 EN 60079-6 Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o" 2015 CENELEC 01791 EN 61400-27-1 Wind turbines - Part 27-1: Electrical simulation models - Wind turbines 2015 CENELEC 01792 EN 62379-7 Common Control Interface for networked digital audio and video products - Part 7: Measurements 2015 CENELEC 01793 EN 62541-5 OPC unified architecture - Part 5: Information Model 2015 CENELEC 01794 EN 61755-3-31 Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-31: Connector
parameters of non-dispersion shifted single mode physically contacting fibres - Angled polyphenylene sulphide rectangularferrules
2015 CENELEC 0
1795 EN 50615 Household and similar electrical appliances - Safety - Particular requirements for devices for fire prevention andsuppression for electric hobs (cooktops)
2015 CENELEC 0
1796 EN 62366-1 Medical devices - Part 1: Application of usability engineering to medical devices - Incorporating corrigendum December2015
2015 CENELEC 0
1797 EN 62769-1 Field device integration (FDI) - Part 1: Overview 2015 CENELEC 01798 EN 62656-3 Standardized product ontology register and transfer by spreadsheets - Part 3: Interface for Common Information Model 2015 CENELEC 01799 EN 60384-25 Fixed capacitors for use in electronic equipment - Part 25: Sectional specification - Surface mount fixed aluminium
electrolytic capacitors with conductive polymer solid electrolyte2015 CENELEC 0
1800 EN 60794-3-10 Optical fibre cables - Part 3-10: Outdoor cables - Family specification for duct, directly buried or lashed aerial opticaltelecommunication cables
2015 CENELEC 0
1801 CLC/TS 50459-2
Railway applications - Communication, signalling and processing systems - European Rail Traffic Management System -Driver- Machine Interface - Part 2: Ergonomic arrangements of GSM-R information
2015 CENELEC 0
1802 EN 60424-8 Ferrite cores - Guidelines on the limits of surface irregularities - Part 8: PQ-cores 2015 CENELEC 01803 CLC/TR 50607-
10Satellite signal distribution over a single coaxial cable - Part 10: Implementation guideline 2015 CENELEC 0
1804 EN 60398 Installations for electroheating and electromagnetic processing - General performance test methods 2015 CENELEC 01805 EN 61169-47 Radio-frequency connectors - Part 47: Sectional specification for radio-frequency coaxial connectors with clamp coupling,
typically for use in 75 خ_ cable networks (type F-Quick)2015 CENELEC 0
1806 EN 60601-2-47 Medical electrical equipment - Part 2-47: Particular requirements for the basic safety and essential performance ofambulatory electrocardiographic systems
2015 CENELEC 0
1807 EN 50597 Energy Consumption of Vending Machines 2015 CENELEC 01808 EN 50411-2-10 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-10: Sealed
fibre splice closures type 2, category G, for FTTH optical distribution networks2015 CENELEC 0
1809 EN 60601-2-8 Medical electrical equipment - Part 2-8: Particular requirements for the basic safety and essential performance oftherapeutic Xray equipment operating in the range 10 kV to 1 MV - Incorporates Amendment A1: 2016
2015 CENELEC 0
1810 EN 60601-2-18 Medical electrical equipment - Part 2-18: Particular requirements for the basic safety and essential performance ofendoscopic equipment
2015 CENELEC 0
1811 EN 61427-2 Secondary cells and batteries for renewable energy storage - General requirements and methods of test - Part 2: On-gridapplications
2015 CENELEC 0
1812 EN 62271-104 High-voltage switchgear and controlgear - Part 104: Alternating current switches for rated voltages higher than 52 kV 2015 CENELEC 01813 EN 61400-25-3 Wind turbines - Part 25-3: Communications for monitoring and control of wind power plants - Information exchange
models2015 CENELEC 0
1814 EN 60700-1 Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing 2015 CENELEC 01815 EN 62769-3 Devices and integration in enterprise systems; Field Device Integration - Part 3: FDI Server 2015 CENELEC 01816 EN 50632-2-22 Electric motor-operated tools - Dust measurement procedure - Part 2-22: Particular requirements for cut-off machines and
wall chasers2015 CENELEC 0
1817 EN 62741 Demonstration of dependability requirements - The dependability case 2015 CENELEC 01818 EN 60320-1 Appliance couplers for household and similar general purposes Part 1: General requirements 2015 CENELEC 01819 EN 62676-4 Video surveillance systems for use in security applications - Part 4: Application guidelines 2015 CENELEC 01820 EN 62541-6 OPC unified architecture - Part 6: Mappings 2015 CENELEC 01821 EN 50289-4-17 Communication cables - Specifications for test methods - Part 4-17: Test methods for UV resistance evaluation of the
sheath of electrical and optical fibre cable2015 CENELEC 0
1822 EN 62870 Electrical installations for lighting and beaconing of aerodromes - Safety secondary circuits in series circuits - Generalsafety requirements
2015 CENELEC 0
1823 EN 60793-1-43 Optical fibres - Part 1-43: Measurement methods and test procedures - Numerical aperture measurement 2015 CENELEC 01824 EN 62841-3-10 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular
requirements for transportable cut-off machines - Incorporating corrigendum July 2016; Incorporates Amendment A11:2017
2015 CENELEC 0
1825 EN 50229 Electric clothes washer-dryers for household use - Methods of measuring the performance - Incorporating corrigendumFebruary 2016
2015 CENELEC 0
1826 EN 62885-3 Surface cleaning appliances - Part 3: Wet carpet cleaning appliances - Methods for measuring the performance 2015 CENELEC 01827 EN 61800-2 Adjustable Speed Electrical Power Drive Systems Part 2: General Requirements Rating Specifications for Low Voltage
Adjustable Frequency a.c. Power Drive Systems2015 CENELEC 0
1828 EN 61175-1 Industrial systems, installations and equipment and industrial products - Designation of signals - Part 1: Basic rules 2015 CENELEC 01829 EN 50216-4 Power transformer and reactor fittings - Part 4: Basic accessories (earthing terminal, drain and filling devices, thermometer
pocket, wheel assembly)2015 CENELEC 0
1830 EN 60076-19 Power transformers - Part 19: Rules for the determination of uncertainties in the measurement of the losses on powertransformers and reactors
2015 CENELEC 0
1831 EN 50629 Energy performance of large power transformers (Um > 36 kV or Sr â__ 40 MVA) - Incorporates Amendment A2: 2018 2015 CENELEC 01832 EN 60384-24 Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Surface mount fixed tantalum
electrolytic capacitors with conductive polymer solid electrolyte2015 CENELEC 0
1833 EN 50607 Satellite signal distribution over a single coaxial cable - Second generation 2015 CENELEC 01834 EN 60143-3 Series Capacitors for Power Systems Part 3: Internal Fuses 2015 CENELEC 01835 CLC/TR 50646 Railway Application - Fixed Installations - Specification for reversible d.c. substations 2015 CENELEC 0
1836 EN 50636-2-107
Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electricallawnmowers - Incorporates Amendment A1: 2018
2015 CENELEC 0
1837 EN 50577 Electric cables - Fire resistance test for unprotected electric cables (P classification)) 2015 CENELEC 01838 EN 50465 European product standard for combined heating power systems using gas fuel 2015 CENELEC 01839 EN 62493 Assessment of lighting equipment related to human exposure to electromagnetic Field 2015 CENELEC 01840 EN 62813 Lithium ion capacitors for use in electric and electronic equipment - Test methods for electrical characteristics 2015 CENELEC 01841 EN IEC 60118-
4Electroacoustics Hearing aids Part 4: Induction-loop systems for hearing aid purposes System performance requirements -Incorporates Amendment A1: 2018
2015 CENELEC 0
1842 EN 61189-5-4 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-4: Generaltest methods for materials and assemblies - Solder alloys and fluxed and non-fluxed solid wire for printed board assemblies
2015 CENELEC 0
1843 EN 62056-1-0 Electricity metering data exchange - The DLMS/COSEM suite - Part 1-0: Smart metering standardization framework 2015 CENELEC 01844 EN 60079-10-2 Explosive atmospheres - Part 10-2: Classification of areas - Explosive dust atmospheres 2015 CENELEC 01845 EN 62325-451-
5Framework for energy market communications - Part 451-5: Problem statement and status request business processes,contextual and assembly models for European market
2015 CENELEC 0
1846 EN 60601-2-26 Medical electrical equipment - Part 2-26: Particular requirements for the basic safety and essential performance ofelectroencephalographs
2015 CENELEC 0
1847 EN 61169-48 Radio-frequency connectors - Part 48: Sectional specification for series BMP R.F. coaxial connectors 2015 CENELEC 01848 EN 61340-4-8 Electrostatics - Part 4-8: Standard test methods for specific applications - Electrostatic discharge shielding - Bags 2015 CENELEC 01849 EN 62467-1 Medical electrical equipment - Dosimetric instruments as used in brachytherapy - Part 1: Instruments based on well-type
ionization chambers2015 CENELEC 0
1850 EN 62841-2-9 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-9: Particularrequirements for hand-held tappers and threaders
2015 CENELEC 0
1851 EN 60127-3 Miniature fuses - Part 3: Sub-miniature fuse-links 2015 CENELEC 01852 EN 60601-1-2 Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral
Standard: Electromagnetic disturbances - Requirements and tests2015 CENELEC 0
1853 EN 50632-1 Electric motor-operated tools - Dust measurement Procedure - Part 1: General requirements 2015 CENELEC 01854 EN 62769-109-
1Field Device Integration (FDI) - Part 109-1: Profiles - HART(r) and WirelessHART(r) 2015 CENELEC 0
1855 EN 61010-2-061
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-061: Particularrequirements for laboratory atomic spectrometers with thermal atomization and ionization
2015 CENELEC 0
1856 EN 60598-1 Luminaires - Part 1: General requirements and tests - Incorporating corrigendum December 2015; Incorporates AmendmentA1: 2018
2015 CENELEC 0
1857 EN 62541-7 OPC unified architecture - Part 7: Profiles 2015 CENELEC 01858 EN 62534 Radiation protection instrumentation - Highly sensitive hand-held instruments for neutron detection of radioactive material 2015 CENELEC 01859 EN 61000-6-5 Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for equipment used in power station and
substation environment2015 CENELEC 0
1860 EN 62047-16 Semiconductor devices - Micro-electromechanical devices - Part 16: Test methods for determining residual stresses ofMEMS films - Wafer curvature and cantilever beam deflection methods
2015 CENELEC 0
1861 EN 61207-6 Expression of performance of gas analyzers - Part 6:Photometric analyzers 2015 CENELEC 01862 EN 60335-2-8 Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar
appliances - Incorporates Amendment A1: 20162015 CENELEC 0
1863 EN 60601-2-5 Medical electrical equipment - Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonicphysiotherapy equipment
2015 CENELEC 0
1864 CLC/TS 50568-8
Electricity metering data exchange - The DLMS/COSEM suite - Part 8: SMITP B-PSK PLC communication profile forneighbourhood networks - Including: The Original-SMITP PLC B-PSK communication profile, The Original-SMITP Localdata exchange profile and The Or
2015 CENELEC 0
1865 EN 61189-5-3 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-3: Generaltest methods for materials and assemblies - Soldering paste for printed board assemblies
2015 CENELEC 0
1866 EN 50180-3 Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 3: Requirements forbushing fixations
2015 CENELEC 0
1867 EN 62559-2 Use case methodology - Part 2: Definition of the template for use cases, actor list and requirements list 2015 CENELEC 01868 EN 60063 Preferred number series for resistors and capacitors 2015 CENELEC 01869 EN 50117-4-2 Coaxial cables - Part 4-2: Sectional specification for CATV cables up to 6 GHz used in cabled distribution networks 2015 CENELEC 01870 EN 62317-5 Ferrite cores - Dimensions - Part 5: EP-cores and associated parts for use in inductors and transformers 2015 CENELEC 01871 EN 61000-6-7 Electromagnetic compatibility (EMC) - Part 6-7: Generic standards - Immunity requirements for equipment intended to
perform functions in a safety-related system (functional safety) in industrial locations2015 CENELEC 0
1872 EN 50288-11-2 Multi-element metallic cables used in analogue and digital communication and control - Part 11-2: Sectional specificationfor un-screened cables, characterized from 1 MHz up to 500 MHz for work area, patch cord and data centre applications
2015 CENELEC 0
1873 EN 50436-6 Alcohol interlocks - Test methods and performance requirements - Part 6: Data security 2015 CENELEC 01874 CLC/TR 60079-
33Explosive atmospheres - Part 33: Equipment protection by special protection s 2015 CENELEC 0
1875 EN 50632-2-6 Electric motor-operated tools - dust measurement procedure - Part 2-6: Particular requirements for hammers 2015 CENELEC 01876 EN 60601-1-12 Medical electrical equipment - Part 1-12: General requirements for basic safety and essential performance - Collateral
Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergencymedical service
2015 CENELEC 0
1877 EN 60384-20 Fixed capacitors for use in electronic equipment - Part 20: Sectional specification - Fixed metallized polyphenylene sulfidefilm dielectric surface mount d.c. capacitors
2015 CENELEC 0
1878 EN 55032 Electromagnetic compatibility of multimedia equipment - Emission Requirements 2015 CENELEC 01879 EN 60115-8-1 Fixed resistors for use in electronic equipment - Part 8-1: Blank detail specification: Fixed surface mount (SMD) low
power film resistors for general electronic equipment, classification level G2015 CENELEC 0
1880 EN 62135-1 Resistance welding equipment - Part 1: Safety requirements for design, manufacture and installation - Incorporatingcorrigendum February 2016
2015 CENELEC 0
1881 EN 62541-100 OPC unified architecture - Part 100: Device Interface 2015 CENELEC 01882 EN 61340-2-1 Electrostatics - Part 2-1: Measurement methods - Ability of materials and products to dissipate static electric charge 2015 CENELEC 01883 EN 60601-2-24 Medical electrical equipment - Part 2-24: Particular requirements for the basic safety and essential performance of infusion
pumps and controllers2015 CENELEC 0
1884 EN 60939-3 Passive filter units for electromagnetic interference suppression - Part 3: Passive filter units for which safety tests areappropriate
2015 CENELEC 0
1885 EN 61285 Industrial-process control - Safety of analyzer houses 2015 CENELEC 01886 EN 61755-2-5 Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 2-5: Connection
parameters of non-dispersion shifted single-mode physically contacting fibres - Angled for reference connectionapplications
2015 CENELEC 0
1887 EN 60601-2-16 Medical electrical equipment - Part 2-16: Particular requirements for the basic safety and essential performance ofhaemodialysis, haemodiafiltration and haemofiltration equipment
2015 CENELEC 0
1888 EN 61189-5-2 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-2: Generaltest methods for materials and assemblies - Soldering flux for printed board assemblies
2015 CENELEC 0
1889 EN 61300-3-21 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-21:Examinations and measurements - Switching time
2015 CENELEC 0
1890 EN 60286-2 Packaging of components for automatic handling - Part 2: Packaging of components with unidirectional leads oncontinuous tapes
2015 CENELEC 0
1891 CLC/TR 50627 Study Report on Electromagnetic Interference between Electrical Equipment/Systems in the Frequency Range Below 150kHz
2015 CENELEC 0
1892 EN 62682 Management of alarms systems for the process industries 2015 CENELEC 0
1893 EN 61300-3-53 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-53:Examinations and measurements - Encircled angular flux (EAF) measurement method based on two-dimensional far fielddata from step index multimo
2015 CENELEC 0
1894 EN 60704-2-1 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-1:Particular requirements for vacuum cleaners
2015 CENELEC 0
1895 EN 62321-7-1 Determination of certain substances in electrotechnical products - Part 7-1: Determination of the presence of hexavalentchromium (Cr(VI)) in colorless and colored corrosion-protected coatings on metals by the colorimetric method
2015 CENELEC 0
1896 EN 60730-2-5 Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems 2015 CENELEC 01897 EN 62753 Digital terrestrial television receivers for the DTMB system 2015 CENELEC 01898 EN 61010-2-
051Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-051: Particularrequirements for laboratory equipment for mixing and stirring
2015 CENELEC 0
1899 EN 50491-11 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems(BACS) - Part 11: Smart Metering - Application Specifications - Simple External Consumer Display
2015 CENELEC 0
1900 EN 62769-101-2
Field Device Integration (FDI) - Part 101-2: Profiles - Foundation Fieldbus HSE 2015 CENELEC 0
1901 EN 62047-17 Semiconductor devices - Micro-electromechanical devices - Part 17: Bulge test method for measuring mechanicalproperties of thin films
2015 CENELEC 0
1902 EN 60384-8 Fixed capacitors for use in electronic equipment - Part 8: Sectional specification: Fixed capacitors of ceramic dielectric,Class 1
2015 CENELEC 0
1903 EN 62386-201 Digital addressable lighting interface - Part 201: Particular requirements for control gear - Fluorescent lamps (device type0)
2015 CENELEC 0
1904 EN 62875 Multimedia systems and equipment - Multimedia e-publishing and e-book technologies - Printing specification of texturemap for auditory presentation of printed texts
2015 CENELEC 0
1905 EN 60384-23 Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed surface mount metallizedpolyethylene naphthalate film dielectric DC capacitors
2015 CENELEC 0
1906 EN 50180-2 Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 2: Requirement forbushing components
2015 CENELEC 0
1907 EN 50502 Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and current collectionsystems
2015 CENELEC 0
1908 CLC/TS 50459-1
Railway applications - Communication, signalling and processing systems - European Rail Traffic Management System -Driver- Machine Interface - Part 1: General principles for the presentation of ERTMS/ETCS/GSM-R information
2015 CENELEC 0
1909 EN 60601-2-1 Medical electrical equipment - Part 2-1: Particular requirements for the basic safety and essential performance of electronaccelerators in the range 1 MeV to 50 MeV
2015 CENELEC 0
1910 EN 61760-4 Surface mounting technology Part 4: Classification, packaging, labelling and handling of moisture sensitive devices -Incorporates Amendment A1: 2018
2015 CENELEC 0
1911 EN 61338-1-5 Waveguide type dielectric resonators - Part 1-5: General information and test conditions - Measurement method ofconductivity at interface between conductor layer and dielectric substrate at microwave frequency
2015 CENELEC 0
1912 EN 55014-2 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2:Immunity - Product family standard
2015 CENELEC 0
1913 EN 61753-031-3
Fibre optic interconnecting devices and passive components - Performance standard - Part 031-3: Non-connectorizedsinglemode 1أ_N and 2أ_N non-wavelength-selective branching devices for Category U - Uncontrolled environment
2015 CENELEC 0
1914 EN 62047-15 Semiconductor devices - Micro-electromechanical devices - Part 15: Test method of bonding strength between PDMS andglass
2015 CENELEC 0
1915 EN 62769-101-1
Field Device Integration (FDI) - Part 101-1: Profiles - Foundation Fieldbus H1 2015 CENELEC 0
1916 EN 60079-5 Explosive atmospheres - Part 5: Equipment protection by powder filling "q" 2015 CENELEC 01917 EN 60317-40 Specifications for particular types of winding wires - Part 40: Glass-fibre braided resin or varnish-impregnated, bare or
enamelled rectangular copper wire, temperature index 2002015 CENELEC 0
1918 EN 60794-1-21 Optical fibre cables - Part 1-21: Generic specification - Basic optical cable test procedures - Mechanical tests methods 2015 CENELEC 01919 EN 61675-2 Radionuclide imaging devices - Characteristics and conditions - Part 2: Gamma cameras for planar, wholebody, and
SPECT imaging2015 CENELEC 0
1920 EN 60793-2-30 Optical fibres - Part 2-30: Product specifications - Sectional specification for category A3 multimode fibres 2015 CENELEC 01921 EN 61010-031 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements
for hand-held probe assemblies for electrical measurement and test2015 CENELEC 0
1922 EN 62148-18 Fibre optic active components and devices - Package and interface standards - Part 18: 40-Gbit/s serial transmitter andreceiver components for use with the LC connector interface
2015 CENELEC 0
1923 CLC/TR 50174-99-1
Information technology - Cabling installation - Part 99-1: Remote powering 2015 CENELEC 0
1924 EN 60601-2-6 Medical electrical equipment - Part 2-6: Particular requirements for the basic safety and essential performance ofmicrowave therapy equipment - Incorporates Amendment A1: 2016
2015 CENELEC 0
1925 EN 62343-5-1 Dynamic modules - Part 5-1: Test methods - Dynamic gain tilt equalizer - Gain tilt settling time measurement 2015 CENELEC 01926 EN 62868 Organic light emitting diode (OLED) panels for general lighting - Safety requirements 2015 CENELEC 01927 EN 61347-1 Lamp controlgear - Part 1: General and safety requirements 2015 CENELEC 01928 EN 62756-1 Digital load side transmission lighting control - Part 1: Basic requirements 2015 CENELEC 01929 EN 61804-3 Function Blocks (FB) for process control and Electronic Device Description Language (EDDL) - Part 3: EDDL syntax and
semantics2015 CENELEC 0
1930 EN 61300-3-35 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35:Examinations and measurements - Visual inspection of fibre optic connectors and fibre-stub transceivers
2015 CENELEC 0
1931 EN 61439-5 Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks 2015 CENELEC 01932 EN 60297-3-
108Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part3- 108: Dimensions of R-type subracks and plug-in units
2015 CENELEC 0
1933 CLC/TS 50568-4
Electricity metering data exchange - Part 4: Lower layer PLC profile using SMITP B-PSK modulation 2015 CENELEC 0
1934 EN 50156-1 Electrical equipment for furnaces and ancillary equipment - Part 1: Requirements for application design and installation 2015 CENELEC 01935 EN 62769-103-
4Field Device Integration (FDI) - Part 103-4: Profiles - PROFINET 2015 CENELEC 0
1936 EN 60534-8-4 Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow 2015 CENELEC 01937 CLC/TS 52056-
8-7Electricity metering data exchange - The DLMS/COSEM suite - Part 8-7: AMC-SS PLC communication profile forneighbourhood networks
2015 CENELEC 0
1938 EN 62852 Connectors for DC-application in photovoltaic systems - Safety requirements and tests 2015 CENELEC 01939 EN 60384-9 Fixed capacitors for use in electronic equipment - Part 9: Sectional specification: Fixed capacitors of ceramic dielectric,
Class 22015 CENELEC 0
1940 EN 60384-19 Fixed capacitors for use in electronic equipment - Part 19: Sectional specification: Fixed metallizedpolyethyleneterephthalate film dielectric surface mount d.c. capacitors
2015 CENELEC 0
1941 EN 62733 Programmable components in electronic lamp controlgear - General and safety requirements 2015 CENELEC 01942 EN 60071-5 Insulation co-ordination - Part 5: Procedures for high-voltage direct current (HVDC) converter stations 2015 CENELEC 01943 EN 61000-4-30 Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement
methods2015 CENELEC 0
1944 EN 80601-2-60 Medical electrical equipment - Part 2-60: Particular requirements for the basic safety and essential performance of dentalequipment
2015 CENELEC 0
1945 EN 60968 Self-ballasted fluorescent lamps for general lighting services - Safety requirements 2015 CENELEC 01946 EN 61726 Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the
reverberation chamber method2015 CENELEC 0
1947 EN 60404-5 Magnetic materials - Part 5: Permanent magnet (magnetically hard) materials - Methods of measurement of magneticproperties
2015 CENELEC 0
1948 EN 62823 Thyristor valves for thyristor controlled series capacitors (TCSC) - Electrical testing 2015 CENELEC 01949 CLC/TS 50625-
3-1Collection, logistics & treatment requirements for WEEE - Part 3-1: Specification for de-pollution - General 2015 CENELEC 0
1950 EN 62841-3-9 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery Safety Part 3-9: Particularrequirements for transportable mitre saws - Incorporates Amendment A11: 2017
2015 CENELEC 0
1951 EN 50411-3-5 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-5: Walloutlet
2015 CENELEC 0
1952 EN 61375-2-5 Electronic railway equipment - Train communication network (TCN) - Part 2-5: Ethernet train backbone 2015 CENELEC 01953 EN 60335-2-
103Household and similar electrical appliances - Safety - Part 2-103: Particular requirements for drives for gates, doors andwindows
2015 CENELEC 0
1954 CLC/TS 50238-2
Railway applications - Compatibility between rolling stock and train detection systems - Part 2: Compatibility with trackcircuits - Incorporating corrigendum July 2016
2015 CENELEC 0
1955 EN 62759-1 Photovoltaic (PV) modules - Transportation testing - Part 1: Transportation and shipping of module package units 2015 CENELEC 01956 EN 60627 Diagnostic X-ray imaging equipment - Characteristics of general purpose and mammographic anti-scatter grids 2015 CENELEC 01957 EN 60079-18 Explosive atmospheres Part 18: Equipment protection by encapsulation â__mâ__ - Incorporates Amendment A1: 2017 2015 CENELEC 01958 EN 60118-0 Electroacoustics - Hearing aids - Part 0: Measurement of the performance characteristics of hearing aids 2015 CENELEC 01959 EN 62769-7 Field Device Integration (FDI) - Part 7: FDI Communication Devices 2015 CENELEC 01960 EN 62708 Document kinds for Electrical and Instrumentation Projects in the Process Industry 2015 CENELEC 01961 EN 62135-2 Resistance welding equipment - Part 2: Electromagnetic compatibility (EMC) requirements 2015 CENELEC 01962 EN 61010-2-
040Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040 Particularrequirements for sterilizers and washer-disinfectors used to treat medical materials
2015 CENELEC 0
1963 EN 62889 Digital video interface - Gigabit video interface for multimedia systems 2015 CENELEC 01964 EN 62841-2-14 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-14: Particular
requirements for hand-held planers2015 CENELEC 0
1965 EN 62471-5 Photobiological safety of lamps and lamp systems - Part 5: Image projectors 2015 CENELEC 01966 EN 60092-507 Electrical installations in ships - Part 507 - Small vessels - Incorporating corrigendum August 2015 2015 CENELEC 01967 EN 61400-25-2 Wind turbines - Part 25-2: Communications for monitoring and control of wind power plants - Information models 2015 CENELEC 01968 EN 50342-7 Lead acid starter batteries - Part 7: General requirements and methods of tests for motorcycle batteries 2015 CENELEC 01969 EN 60904-2 Photovoltaic devices - Part 2: Requirements for photovoltaic reference devices 2015 CENELEC 01970 EN 62817 Photovoltaic systems - Design qualification of solar trackers - Incorporates Amendment A1: 2017 2015 CENELEC 01971 EN 50342-1 Lead-acid starter batteries - Part 1: General requirements and methods of test 2015 CENELEC 01972 EN 61169-50 Radio-frequency connectors - Part 50: Sectional specification for RF coaxial connectors with inner diameter of outer
conductors 4,11 mm with quick lock system - Characteristic impedance 50 Ohm (type QMA)2015 CENELEC 0
1973 EN 61290-1 Optical amplifiers - Test methods - Part 1: Power and gain parameters 2015 CENELEC 01974 EN 60794-3 Optical fibre cables - Part 3: Sectional specification - Outdoor cables 2015 CENELEC 01975 EN 60079-10-1 Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres - Incorporating corrigendum
November 20152015 CENELEC 0
1976 EN 62676-3 Video surveillance systems for use in security applications - Part 3: Analog and digital video interfaces 2015 CENELEC 01977 EN 62005-9-1 Fibre optic interconnecting devices and passive components - Reliability - Part 9-1: Qualification of passive optical
components2015 CENELEC 0
1978 EN 61804-5 Function blocks (FB) for process control and electronic device description language (EDDL) - Part 5: EDDL Builtin library 2015 CENELEC 01979 EN 61837-3 Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead
connections - Part 3: Metal enclosures2015 CENELEC 0
1980 EN 62241 Nuclear power plants - Main control room - Alarm functions and presentation 2015 CENELEC 01981 EN 140402-801 Detail specification: Fixed low power wirewound surface mount (SMD) resistors - Rectangular - Stability classes 0,5; 1; 2 2015 CENELEC 01982 EN 45544-3 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic
gases and vapours - Part 3: Performance requirements for apparatus used for general gas detection2015 CENELEC 0
1983 EN 60601-2-36 Medical electrical equipment - Part 2-36: Particular requirements for the basic safety and essential performance ofequipment for extracorporeally induced lithotripsy
2015 CENELEC 0
1984 EN 60987 Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-basedsystems
2015 CENELEC 0
1985 EN 60143-1 Series capacitors for power systems - Part 1: General 2015 CENELEC 01986 EN 50289-1-17 Communication cables - Specifications for test methods - Part 1- 17: Electrical test methods - Exogenous Crosstalk
ExNEXT and ExFEXT2015 CENELEC 0
1987 EN 60695-1-11 Fire hazard testing - Part 1-11: Guidance for assessing the fire hazard of electrotechnical products - Fire hazard assessment 2015 CENELEC 01988 EN 62275 Cable management systems - Cable ties for electrical installations 2015 CENELEC 01989 EN 61788-21 Superconductivity - Part 21: Superconducting wires - Test methods for practical superconducting wires - General
characteristics and guidance2015 CENELEC 0
1990 EN 60601-2-68 Medical electrical equipment - Part 2-68: Particular requirements for the basic safety and essential performance of X-ray-based image-guided radiotherapy equipment for use with electron accelerators, light ion beam therapy equipment andradionuclide beam
2015 CENELEC 0
1991 EN 60086-4 Primary batteries - Part 4: Safety of lithium batteries 2015 CENELEC 01992 EN 61340-5-3 Electrostatics - Part 5-3: Protection of electronic devices from electrostatic phenomena - Properties and requirements
classification for packaging intended for electrostatic discharge sensitive devices2015 CENELEC 0
1993 EN 60598-2-21 Luminaires - Part 2-21: Particular requirements - Rope lights 2015 CENELEC 01994 HD 60364-8-1 Low-voltage electrical installations - Part 8-1: Energy efficiency 2015 CENELEC 01995 EN 50156-2 Electrical equipment for furnaces and ancillary equipment - Part 2: Requirements for design, development and type
approval of safety devices and subsystems2015 CENELEC 0
1996 EN 62541-11 OPC unified architecture - Part 11: Historical Access 2015 CENELEC 01997 EN 60115-2 Fixed resistors for use in electronic equipment - Part 2: Sectional specification: Leaded fixed low power film resistors 2015 CENELEC 01998 EN 62670-2 Photovoltaic concentrators (CPV) - Performance testing - Part 2: Energy measurement 2015 CENELEC 01999 EN 61755-2-4 Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 2-4: Connection
parameters of non-dispersion shifted single-mode physically contacting fibres - Non-angled for reference connectionapplications
2015 CENELEC 0
2000 EN 60695-11-20
Fire hazard testing - Part 11-20: Test flames - 500 W flame test methods - Incorporating corrigendum January 2016 2015 CENELEC 0
2001 EN 62541-13 OPC unified architecture - Part 13: Aggregates 2015 CENELEC 02002 EN 60317-0-9 Specifications for particular types of winding wires - Part 0-9: General requirements - Enamelled rectangular aluminium
wire2015 CENELEC 0
2003 EN 60335-2-6 Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs,ovens and similar appliances
2015 CENELEC 0
2004 EN 50440 Efficiency of domestic electrical storage water heaters and testing methods 2015 CENELEC 02005 EN 60601-2-11 Medical electrical equipment - Part 2-11: Particular requirements for the basic safety and essential performance of gamma
beam therapy equipment2015 CENELEC 0
2006 EN 62740 Root cause analysis (RCA) 2015 CENELEC 02007 EN 61189-2-
721Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2-721: Testmethods for materials for interconnection structures - Measurement of relative permittivity and loss tangent for copper cladlamin
2015 CENELEC 0
2008 EN 60455-2 Resin Based Reactive Compounds Used for Electrical Insulation - Part 2: Methods of Test 2015 CENELEC 0
2009 EN 62810 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods 2015 CENELEC 02010 EN 62858 Lightning density based on lightning location systems (LLS) - General principles 2015 CENELEC 02011 EN 60598-2-20 Luminaires - Part 2-20: Particular requirements - Lighting chains 2015 CENELEC 02012 EN 62541-4 OPC unified architecture - Part 4: Services 2015 CENELEC 02013 EN 62620 Secondary cells and batteries containing alkaline or other nonacid electrolytes - Secondary lithium cells and batteries for
use in industrial applications2015 CENELEC 0
2014 EN 50090-4-3 Home and Building Electronic Systems (HBES) - Part 4-3: Media independent layers - Communication over IP (EN 13321-2)
2015 CENELEC 0
2015 EN 60839-11-2 Alarm and electronic security systems - Part 11-2: Electronic access control systems - Application guidelines 2015 CENELEC 02016 EN 62246-1 Reed switches - Part 1: Generic specification 2015 CENELEC 02017 EN 50598-2 Ecodesign for power drive systems, motor starters, power electronics & their driven applications - Part 2: Energy
efficiency indicators for power drive systems and motor starters - Incorporate Amendment A1: 2014; Remains Current2014 CENELEC 0
2018 EN 60214-1 Tap-changers - Part 1: Performance requirements and test methods 2014 CENELEC 02019 EN 61910-1 Medical electrical equipment - Radiation dose documentation - Part 1: Radiation dose structured reports for radiography
and radioscopy2014 CENELEC 0
2020 EN 50599 Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173-4- Screened straight patch cords and straight work area cords for class D applications - Detail specification
2014 CENELEC 0
2021 EN 62074-1 Fibre optic interconnecting devices and passive components - Fibre optic WDM devices - Part 1: Generic specification 2014 CENELEC 02022 EN 61158-3-14 Industrial communication networks - Fieldbus specifications - Part 3-14: Data-link layer service definition - Type 14
elements2014 CENELEC 0
2023 EN 50636-2-94 Household and similar electrical appliances - Safety - Part 2-94: Particular requirements for scissors type grass shears 2014 CENELEC 02024 EN 60034-19 Rotating electrical machines - Part 19: Specific test methods for d.c. machines on conventional and rectifier-fed supplies 2014 CENELEC 02025 EN 62343-2 Dynamic modules - Part 2: Reliability qualification 2014 CENELEC 02026 EN 50526-2 Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 2: Voltage limiting
devices2014 CENELEC 0
2027 EN 50491-6-1 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems(BACS) - Part 6-1: HBES installations - Installation and planning
2014 CENELEC 0
2028 EN 61158-4-13 Industrial communication networks - Fieldbus specifications - Part 4-13: Data-link layer protocol specification - Type 13elements
2014 CENELEC 0
2029 EN 61158-3-3 Industrial communication networks - Fieldbus specifications - Part 3-3: Data-link layer service definition - Type 3 elements 2014 CENELEC 02030 EN 55016-2-1 Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of
disturbances and immunity - Conducted disturbance measurements - Incorporates Amendment A1: 20172014 CENELEC 0
2031 EN 61196-10-1 Coaxial communication cables - Part 10-1: Blank detail specification for semi-rigid cables with polytetrafluoroethylene(PTFE) dielectric
2014 CENELEC 0
2032 EN 61557-15 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuringor monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in ITsystems and
2014 CENELEC 0
2033 EN 62522 Calibration of tuneable laser sources 2014 CENELEC 02034 EN 62566 Nuclear power plants - Instrumentation and control important to safety - Development of HDL-programmed integrated
circuits for systems performing category A functions2014 CENELEC 0
2035 EN 61290-3-3 Optical amplifiers - Test methods - Part 3-3: Noise figure parameters - Signal power to total ASE power ratio 2014 CENELEC 02036 EN 50516-3-1 Industrial connector sets and interconnect components to be used in optical fibre control and communication systems -
Product specifications - Part 3-1: Type ODVA APC terminated on EN 60793-2-50 category B1.1 and B1.3 singlemodefibre to meet the requirem
2014 CENELEC 0
2037 EN 61158-6-3 Industrial communication networks - Fieldbus specifications - Part 6-3: Application layer protocol specification - Type 3elements
2014 CENELEC 0
2038 EN 50700 Information technology - Premises distribution access network (PDAN) cabling to support deployment of opticalbroadband networks
2014 CENELEC 0
2039 EN 61158-1 Industrial communication networks - Fieldbus specifications - Part 1: Overview and guidance for the IEC 61158 and IEC61784 series
2014 CENELEC 0
2040 EN 60684-3-214
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 214: Heat-shrinkable, polyolefinsleeving, not flame retarded, thick and medium wall
2014 CENELEC 0
2041 EN 50603 Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173-4- Screened straight patch cords and straight work area cords for class E applications - Detail specification
2014 CENELEC 0
2042 EN 60317-55 Specifications for particular types of winding wires - Part 55: Solderable polyurethane enamelled round copper wireovercoated with polyamide, Class 180
2014 CENELEC 0
2043 EN 60794-5-10 Optical fibre cables - Part 5â__10: Family specification - Outdoor microduct optical fibre cables, microducts and protectedmicroducts for installation by blowing
2014 CENELEC 0
2044 EN 62325-451-3
Framework for energy market communications - Part 451-3: Transmission capacity allocation business process (explicit orimplicit auction) and contextual models for European market - Incorporates Amendment A1: 2017
2014 CENELEC 0
2045 EN 60300-1 Dependability management - Part 1: Guidance for management and application 2014 CENELEC 02046 EN 60317-21 Specifications for particular types of winding wires - Part 21: Solderable polyurethane enamelled round copper wire
overcoated with polyamide, class 1552014 CENELEC 0
2047 EN 61260-1 Electroacoustics - Octave-band and fractional-octave-band filters - Part 1: Specifications 2014 CENELEC 02048 EN 61158-4-1 Industrial communication networks - Fieldbus specifications - Part 4-1: Data-link layer protocol specification - Type 1
elements2014 CENELEC 0
2049 EN 61753-042-2
Fibre optic interconnecting devices and passive components - Performance standard - Part 042-2: Plug-pigtail-style andplugreceptacle- style OTDR reflecting devices for category C - Controlled environments
2014 CENELEC 0
2050 EN 61850-3 Communication networks and systems for power utility automation - Part 3: General requirements 2014 CENELEC 02051 EN 50600-2-3 Information technology - Data centre facilities and infrastructures - Part 2-3: Environmental control 2014 CENELEC 02052 EN 61534-21 Powertrack systems - Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting 2014 CENELEC 02053 EN 62056-3-1 Electricity metering data exchange - The DLMS/COSEM suite - Part 3-1: Use of local area networks on twisted pair with
carrier signalling2014 CENELEC 0
2054 EN 50601 Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173-4- Screened straight patch cords and straight work area cords for class D applications - Detail specification
2014 CENELEC 0
2055 EN 60794-1-20 Optical fibre cables - Part 1-20: Generic specification - Basic optical cable test procedures - General and definitions 2014 CENELEC 02056 EN 60794-1-24 Optical fibre cables - Part 1-24: Generic specification - Basic optical cable test procedures - Electrical test methods 2014 CENELEC 02057 EN 60335-2-31 Household and similar electrical appliances - Safety - Part 2-31: Particular requirements for range hoods and other cooking
fume extractors2014 CENELEC 0
2058 EN 60684-3-284
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 284: Heat-shrinkable, sleevings,for oil barrier applications
2014 CENELEC 0
2059 EN 60317-52 Specifications for particular types of winding wires - Part 52: Aromatic polyamide (aramid) tape wrapped round copperwire, temperature index 220
2014 CENELEC 0
2060 EN 62676-1-2 Video surveillance systems for use in security applications - Part 1-2: System requirements Performance requirements forvideo transmission
2014 CENELEC 0
2061 EN 61000-4-5 Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test - IncorporatesAmendment A1: 2017
2014 CENELEC 0
2062 CLC/TR 50624 Railway applications - Functional Interface Specification - Pantograph System 2014 CENELEC 02063 EN 61400-2 Wind turbines - Part 2: Small wind turbines 2014 CENELEC 02064 EN 60317-28 Specifications for particular types of winding wires - Part 28: Polyesterimide enamelled rectangular copper wire, class 180 2014 CENELEC 02065 EN 60728-1-2 Cable networks for television signals, sound signals and interactive services - Part 1-2: Performance requirements for
signals delivered at the system outlet in Operation2014 CENELEC 0
2066 EN 60871-4 Shunt capacitors for AC power systems having a rated voltage above 1 000 V - Part 4: Internal fuses 2014 CENELEC 02067 EN 61158-6-14 Industrial communication networks - Fieldbus specifications - Part 6-14: Application layer protocol specification - Type 14
elements2014 CENELEC 0
2068 EN 61851-24 Electric vehicle conductive charging system - Part 24: Digital communication between a d.c. EV charging station and anelectric vehicle for control of d.c. charging
2014 CENELEC 0
2069 EN 61158-5-23 Industrial communication networks - Fieldbus specifications - Part 5-23: Application layer service definition - Type 23elements
2014 CENELEC 0
2070 EN 61753-071-2
Fibre optic interconnecting devices and passive components - Performance standard - Part 071-2: Non-connectorizedsinglemode fibre optic 1 2 _أ and 2 2 _أ spatial switches for category C - Controlled environments
2014 CENELEC 0
2071 EN 62379-5-2 Common control interface for networked digital audio and video products - Part 5-2: Transmission over networks -Signalling (TA4)
2014 CENELEC 0
2072 EN 61243-3 Live working - Voltage detectors - Part 3: Two-pole low-voltage type 2014 CENELEC 02073 EN 61158-6-24 Industrial communication networks - Fieldbus specifications - Part 6-24: Application layer protocol specification - Type-24
Elements2014 CENELEC 0
2074 EN 50434 Safety of household and similar appliances - Particular requirements for mains operated shredders and chippers 2014 CENELEC 02075 CLC/TR 50083-
2-2Cable networks for television signals, sound signals and interactive services - Part 2-2: Interference issues for DVB-Treception in the presence of LTE base station signals
2014 CENELEC 0
2076 EN 62149-3 Fibre optic active components and devices - Performance standards - Part 3: Modulator-integrated laser diode transmittersfor 2,5-Gbit/s to 40-Gbit/s fibre optic transmission systems
2014 CENELEC 0
2077 EN 62196-3 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensionalcompatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers
2014 CENELEC 0
2078 EN 61169-49 Radio-frequency connectors - Part 49: Sectional specification for SMAA series R.F connectors 2014 CENELEC 02079 EN 62626-1 Low-voltage switchgear and controlgear enclosed equipment - Part 1: Enclosed switch-disconnectors outside the scope of
IEC 60947-3 to provide isolation during repair and maintenance work2014 CENELEC 0
2080 EN 62770 Fluids for electrotechnical applications - Unused natural esters for transformers and similar electrical equipment 2014 CENELEC 02081 EN 61534-22 Powertrack systems - Part 22: Particular requirements for powertrack systems intended for onfloor or underfloor
installation2014 CENELEC 0
2082 EN 55016-1-2 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance andimmunity measuring apparatus - Coupling devices for conducted disturbance measurements - Incorporates Amendment A1:2017
2014 CENELEC 0
2083 EN 61158-3-13 Industrial communication networks - Fieldbus specifications - Part 3-13: Data-link layer service definition - Type 13elements
2014 CENELEC 0
2084 EN 61158-3-2 Industrial communication networks - Fieldbus specifications - Part 3-2: Data-link layer service definition - Type 2 elements 2014 CENELEC 02085 EN 61158-4-12 Industrial communication networks - Fieldbus specifications - Part 4-12: Data-link layer protocol specification - Type 12
elements2014 CENELEC 0
2086 CLC/TS 62603-1
Industrial process control systems - Guideline for evaluating process control systems - Part 1: Specifications 2014 CENELEC 0
2087 EN 61010-2-010
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particularrequirements for laboratory equipment for the heating of Materials
2014 CENELEC 0
2088 EN 61300-2-35 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-35: Tests -Cable nutation
2014 CENELEC 0
2089 EN 62826 Surface cleaning appliances - Floor treatment machines with or without traction drive, for commercial use - Methods ofmeasuring the performance
2014 CENELEC 0
2090 EN 62288 Maritime navigation and radiocommunication equipment and systems - Presentation of navigation-related information onshipborne navigational displays - General requirements, methods of testing and required test results
2014 CENELEC 0
2091 EN 62555 Ultrasonics - Power measurement - High intensity therapeutic ultrasound (HITU) transducers and systems 2014 CENELEC 0
2092 61000-4-19 Electromagnetic compatibility (EMC) - Part 4-19: Testing and measurement techniques - Test for immunity to conducted,differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c. power ports
2014 CENELEC 0
2093 EN 62325-451-2
Framework for energy market communications - Part 451-2: Scheduling business process and contextual model for CIMEuropean market
2014 CENELEC 0
2094 EN 62929 Cleaning robots for household use - Dry cleaning: Methods of measuring performance 2014 CENELEC 02095 EN 61158-6-2 Industrial communication networks - Fieldbus specifications - Part 6-2: Application layer protocol specification - Type 2
elements2014 CENELEC 0
2096 EN 61347-2-13 Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules -Incorporates Amendment A1: 2017
2014 CENELEC 0
2097 EN 61754-30 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 30: Type CLIKconnector series
2014 CENELEC 0
2098 EN 50602 Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173-4- Unscreened straight patch cords and straight work area cords for class E applications - Detail specification
2014 CENELEC 0
2099 EN 62386-101 Digital addressable lighting interface - Part 101: General requirements - System components 2014 CENELEC 02100 EN 60721-2-9 Classification of environmental conditions - Part 2-9: Environmental conditions appearing in nature - Measured shock and
vibration data - Storage, transportation and in-use2014 CENELEC 0
2101 EN 61970-453 Energy management system application program interface (EMS-API) - Part 453: Diagram layout profile 2014 CENELEC 02102 EN 62676-2-2 Video surveillance systems for use in security applications - Part 2-2: Video transmission protocols - IP interoperability
implementation based on HTTP and REST services2014 CENELEC 0
2103 EN 60793-1-51 Optical fibres - Part 1-51: Measurement methods and test procedures - Dry heat (steady state) tests 2014 CENELEC 02104 EN 60728-1-1 Cable networks for television signals, sound signals and interactive services - Part 1-1: RF cabling for two way home
networks2014 CENELEC 0
2105 EN 60876-1 Fibre optic interconnecting devices and passive components - Fibre optic spatial switches - Part 1: Generic specification 2014 CENELEC 02106 EN 61883-6 Consumer audio/video equipment - Digital interface - Part 6: Audio and music data transmission protocol 2014 CENELEC 02107 EN 61753-031-
6Fibre optic interconnecting devices and passive components - Performance standard - Part 031-6: Non-connectorizedsinglemode 1xN and 2xN non-wavelengthselective branching devices for Category O - Uncontrolled environment
2014 CENELEC 0
2108 EN 61280-2-12 Fibre optic communication subsystem test procedures - Part 2-12: Digital systems - Measuring eye diagrams and Q-factorusing a software triggering technique for transmission signal quality assessment
2014 CENELEC 0
2109 EN 61190-1-2 Attachment materials for electronic assembly - Part 1-2: Requirements for soldering pastes for high-quality interconnects inelectronics assembly
2014 CENELEC 0
2110 EN 61158-5-24 Industrial communication networks - Fieldbus specifications - Part 5-24: Application layer service definition - Type-24elements
2014 CENELEC 0
2111 EN 62608-1 Multimedia home network configuration - Basic Reference model - Part 1: System model 2014 CENELEC 02112 EN 62351-3 Power systems management and associated information exchange - Data and communications security - Part 3:
Communication network and system security - Profiles including TCP/IP - Incorporates Amendment A1: 20182014 CENELEC 0
2113 EN 62386-102 Digital addressable lighting interface - Part 102: General requirements - Control gear 2014 CENELEC 02114 EN 60793-1-52 Optical fibres - Part 1-52: Measurement methods and test procedures - Change of temperature tests 2014 CENELEC 02115 EN 60079-2 Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p" 2014 CENELEC 02116 EN 60947-4-3 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and
contactors for non-motor loads2014 CENELEC 0
2117 EN 61158-6-20 Industrial communication networks - Fieldbus specifications - Part 6-20: Application layer protocol specification - Type 20elements
2014 CENELEC 0
2118 EN 62290-1 Railway applications - Urban guided transport management and command/control systems - Part 1: System principles andfundamental concepts
2014 CENELEC 0
2119 EN 60601-2-27 Medical electrical equipment - Part 2-27: Particular requirements for the basic safety and essential performance ofelectrocardiographic monitoring equipment
2014 CENELEC 0
2120 EN 61076-2-104
Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification forcircular connectors with M8 screw-locking or snap-locking
2014 CENELEC 0
2121 EN 60317-53 Specifications for particular types of winding wires - Part 53: Aromatic polyamide (aramid) tape wrapped rectangularcopper wire, temperature index 220
2014 CENELEC 0
2122 EN 62321-5 Determination of certain substances in electrotechnical products - Part 5: Cadmium, lead and chromium in polymers andelectronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS
2014 CENELEC 0
2123 EN 60034-18-41
Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in rotatingelectrical machines fed from voltage converters - Qualification and quality control tests
2014 CENELEC 0
2124 EN 61300-2-43 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-43: Tests -Screen testing of return loss of single-mode PC optical fibre connectors
2014 CENELEC 0
2125 EN 61300-3-52 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-52:Examinations and measurements - Guide hole and alignment pin deformation constant, CD for 8 degree angled PCrectangular ferrule, single mode f
2014 CENELEC 0
2126 EN 61158-3-19 Industrial communication networks - Fieldbus specifications - Part 3-19: Data-link layer service definition - Type 19elements
2014 CENELEC 0
2127 EN 60299 Household electric blankets - Methods for measuring performance 2014 CENELEC 02128 EN 61400-23 Wind turbines - Part 23: Full-scale structural testing of rotor blades 2014 CENELEC 02129 EN 61158-3-4 Industrial communication networks - Fieldbus specifications - Part 3-4: Data-link layer service definition - Type 4 elements 2014 CENELEC 02130 EN 61753-041-
2Fibre optic interconnecting devices and passive components - Performance standard - Part 041-2: Non-connectorizedsinglemode OTDR reflecting device for category C - Controlled environment
2014 CENELEC 0
2131 EN 61158-4-14 Industrial communication networks - Fieldbus specifications - Part 4-14: Data-link layer protocol specification - Type 14elements
2014 CENELEC 0
2132 EN 61300-3-14 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-14:Examinations and measurements - Error and repeatability of the attenuation settings of a variable optical attenuator
2014 CENELEC 0
2133 EN 50299-1 Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from72,5 kV to 550 kV - Part 1: Fluid-filled cable terminations
2014 CENELEC 0
2134 EN 60974-3 Arc welding equipment - Part 3: Arc striking and stabilizing devices 2014 CENELEC 02135 EN 50343 Railway applications - Rolling stock - Rules for installation of cabling - Incorporates Amendment A1: 2017 2014 CENELEC 02136 EN 61577-3 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 3: Specific
requirements for radon decay product measuring instruments2014 CENELEC 0
2137 EN 62196-1 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: Generalrequirements
2014 CENELEC 0
2138 EN 61158-6-4 Industrial communication networks - Fieldbus specifications - Part 6-4: Application layer protocol specification - Type 4elements
2014 CENELEC 0
2139 EN 61158-5-22 Industrial communication networks - Fieldbus specifications - Part 5-22: Application layer service definition - Type 22elements
2014 CENELEC 0
2140 EN 61966-12-2 Multimedia systems and equipment - Colour measurement and management - Part 12-2: Simple metadata format foridentification of colour gamut
2014 CENELEC 0
2141 EN 60793-1-53 Optical fibres - Part 1-53: Measurement methods and test procedures - Water immersion tests 2014 CENELEC 02142 EN 60255-127 Measuring relays and protection equipment - Part 127: Functional requirements for over/under voltage protection 2014 CENELEC 02143 EN 61786-1 Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of
human beings - Part 1: Requirements for measuring instruments2014 CENELEC 0
2144 EN 60601-2-34 Medical electrical equipment - Part 2-34: Particular requirements for the basic safety and essential performance of invasiveblood pressure monitoring equipment
2014 CENELEC 0
2145 EN 62149-9 Fibre optic active components and devices - Performance standards - Part 9: Seeded reflective semiconductor opticalamplifier transceivers
2014 CENELEC 0
2146 EN 62485-3 Safety requirements for secondary batteries and battery installations - Part 3: Traction batteries 2014 CENELEC 0
2147 EN 62321-3-1 Determination of certain substances in electrotechnical products - Part 3-1: Screening - Lead, mercury, cadmium, totalchromium and total bromine by X-ray fluorescence spectrometry
2014 CENELEC 0
2148 EN 61784-1 Industrial communication networks - Profiles - Part 1: Fieldbus profiles 2014 CENELEC 02149 EN 62290-2 Railway applications - Urban guided transport management and command/control systems - Part 2: Functional
requirements specification2014 CENELEC 0
2150 EN 50125-1 Railway applications - Environmental conditions for equipment - Part 1: Rolling stock and on-board equipment 2014 CENELEC 02151 EN 61858-1 Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) -
Part 1: Wire-wound winding EIS2014 CENELEC 0
2152 CLC/TS 50083-3-3
Cable networks for television signals, sound signals and interactive services - Part 3-3: Active wideband equipment forcable networks - Methods of measurement of the maximum operating output level in the return path
2014 CENELEC 0
2153 EN 60754-1 Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content 2014 CENELEC 02154 EN 60320-3 Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges 2014 CENELEC 02155 EN 60819-3-4 Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Aramid fibre paper
containing not more than 50 % of mica particles2014 CENELEC 0
2156 EN 62198 Managing risk in projects - Application guidelines 2014 CENELEC 02157 EN 62271-211 High-voltage switchgear and controlgear - Part 211: Direct connection between power transformers and gas-insulated
metal-enclosed switchgear for rated voltages above 52 kV2014 CENELEC 0
2158 EN 61158-6-23 Industrial communication networks - Fieldbus specifications - Part 6-23: Application layer protocol specification - Type 23elements
2014 CENELEC 0
2159 EN 61158-4-19 Industrial communication networks - Fieldbus specifications - Part 4-19: Data-link layer protocol specification - Type 19elements
2014 CENELEC 0
2160 EN 60358-3 Coupling capacitors and capacitor dividers - Part 3: AC or DC coupling capacitors for harmonic-filters applications 2014 CENELEC 02161 EN 61300-3-29 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29:
Examinations and measurements - Spectral transfer characteristics of DWDM devices2014 CENELEC 0
2162 EN 61158-3-20 Industrial communication networks - Fieldbus specifications - Part 3-20: Data-link layer service definition - Type 20elements
2014 CENELEC 0
2163 EN 61753-031-2
Fibre optic interconnecting devices and passive components - Performance standard - Part 031-2: Non-connectorizedsinglemode 1أ_N and 2أ_N non-wavelength-selective branching devices for Category C - Controlled environment
2014 CENELEC 0
2164 EN 61255 Household electric heating pads - Methods for measuring performance 2014 CENELEC 02165 EN 61158-3-22 Industrial communication networks - Fieldbus specifications - Part 3-22: Data-link layer service definition - Type 22
elements2014 CENELEC 0
2166 CLC/TS 50131-9
Alarm systems - Intrusion and hold-up systems - Part 9: Alarm verification - Methods and principles 2014 CENELEC 0
2167 EN 50636-2-100
Household and similar electrical appliances - Safety - Part 2-100: Particular requirements for hand-held mains-operatedgarden blowers, vacuums and blower vacuums
2014 CENELEC 0
2168 EN 60317-38 Specifications for particular types of winding wires - Part 38: Polyester or polyesterimide overcoated with polyamide-imide, enamelled round copper wire, class 200, with a bonding layer
2014 CENELEC 0
2169 EN 50299-2 Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from72,5 kV to 550 kV - Part 2: Dry-type cable terminations
2014 CENELEC 0
2170 EN 60695-10-2 Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method 2014 CENELEC 02171 EN 61788-19 Superconductivity - Part 19: Mechanical properties measurement - Room temperature tensile test of reacted Nb3Sn
composite superconductors2014 CENELEC 0
2172 EN 61978-1 Fibre optic interconnecting devices and passive components - Fibre optic passive chromatic dispersion compensators - Part1: Generic specification
2014 CENELEC 0
2173 EN 60598-2-22 Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting - Incorporating corrigendumSeptember 2016
2014 CENELEC 0
2174 EN 60825-1 Safety of laser products - Part 1: Equipment classification and requirements 2014 CENELEC 0
2175 EN 60695-1-40 Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids 2014 CENELEC 02176 EN 60034-2-1 Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding
machines for traction vehicles)2014 CENELEC 0
2177 EN 62271-202 High-voltage switchgear and controlgear - Part 202: Highvoltage/ low-voltage prefabricated substation - Incorporatingcorrigendum September 2014
2014 CENELEC 0
2178 EN 60079-1 Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" 2014 CENELEC 02179 EN 60695-2-11 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-
products2014 CENELEC 0
2180 EN 61158-6-5 Industrial communication networks - Fieldbus specifications - Part 6-5: Application layer protocol specification - Type 5elements
2014 CENELEC 0
2181 EN 61753-1-3 Fibre optic interconnecting devices and passive components - Performance standard - Part 1-3: General and guidance forsingle-mode fibre optic connector and cable assembly for industrial environment, Category I
2014 CENELEC 0
2182 EN 62386-101 Digital addressable lighting interface - Part 101: General requirements - System components - Incorporates Amendment:2018
2014 CENELEC 0
2183 EN 62481-4 Digital living network alliance (DLNA) home networked device interoperability guidelines - Part 4: DRM interoperabilitysolutions (TA9)
2014 CENELEC 0
2184 EN 60684-3-285
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 285: Heat-shrinkable polyolefinsleeving, for medium voltage joint insulation
2014 CENELEC 0
2185 EN 60749-42 Semiconductor devices - Mechanical and climatic test methods - Part 42: Temperature and humidity storage 2014 CENELEC 02186 EN 62489-2 Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 2: Methods of calculating and
measuring the low-frequency magnetic field emissions from the loop for assessing conformity with guidelines on limits forhuman exposure
2014 CENELEC 0
2187 EN 61280-4-2 Fibre-optic communication subsystem test procedures - Part 4-2: Installed cable plant - Single-mode attenuation and opticalreturn loss measurement
2014 CENELEC 0
2188 EN 60661 Methods for measuring the performance of electric household coffee makers 2014 CENELEC 02189 EN 61753-081-
2Fibre optic interconnecting devices and passive components - Performance standard - Part 081-2: Non-connectorizedsingle-mode fibre optic middle-scale 1 x N DWDM devices for category C - Controlled environments
2014 CENELEC 0
2190 EN 62065 Maritime navigation and radiocommunication equipment and systems - Track control systems - Operational andperformance requirements, methods of testing and required test results
2014 CENELEC 0
2191 EN 61558-2-10 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-10: Particular requirements and testsfor separating transformers with high insulation level and separating transformers with output voltages exceeding 1 000 V
2014 CENELEC 0
2192 EN 62137-4 Electronics assembly technology - Part 4: Endurance test methods for solder joint of area array type package surface mountdevices - Incorporating corrigendum February 2015
2014 CENELEC 0
2193 EN 60068-1 Environmental testing - Part 1: General and guidance 2014 CENELEC 02194 EN 61158-4-4 Industrial communication networks - Fieldbus specifications - Part 4-4: Data-link layer protocol specification - Type 4
elements2014 CENELEC 0
2195 EN 62675 Secondary cells and batteries containing alkaline or other nonacid electrolytes - Sealed nickel-metal hydride prismaticrechargeable single cells
2014 CENELEC 0
2196 EN 60870-6-503
Telecontrol equipment and systems - Part 6-503: Telecontrol protocols compatible with ISO standards and ITU-Trecommendations - TASE.2 Services and protocol
2014 CENELEC 0
2197 EN 60728-10 Cable networks for television signals, sound signals and interactive services - Part 10: System performance for return paths 2014 CENELEC 02198 EN 50585 Communications protocol to transport satellite delivered signals over IP networks 2014 CENELEC 02199 EN 60754-2 Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement)
and conductivity2014 CENELEC 0
2200 EN 61869-4 Instrument transformers - Part 4: Additional requirements for combined transformers 2014 CENELEC 02201 EN 60695-9-2 Fire hazard testing - Part 9-2: Surface spread of flame - Summary and relevance of test methods 2014 CENELEC 02202 EN 50618 Electric cables for photovoltaic systems (BT(DE/NOT)258) 2014 CENELEC 0
2203 EN 61158-5-2 Industrial communication networks - Fieldbus specifications - Part 5-2: Application layer service definition - Type 2elements
2014 CENELEC 0
2204 EN 60079-29-3 Explosive atmospheres - Part 29-3: Gas detectors - Guidance on functional safety of fixed gas detection systems 2014 CENELEC 02205 EN 60127-2 Miniature fuses - Part 2: Cartridge fuse-links 2014 CENELEC 02206 EN 62841-3-6 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery Safety Part 3-6: Particular
requirements for transportable diamond drills with liquid system - Incorporates Amendment A11: 20172014 CENELEC 0
2207 EN 62841-3-1 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particularrequirements for transportable table saws - Incorporates Amendment A11: 2017
2014 CENELEC 0
2208 EN 61158-4-20 Industrial communication networks - Fieldbus specifications - Part 4-20: Data-link layer protocol specification - Type 20elements
2014 CENELEC 0
2209 EN 60079-14 Explosive atmospheres - Part 14: Electrical installations design, selection and erection 2014 CENELEC 02210 EN 60904-8 Photovoltaic devices - Part 8: Measurement of spectral responsivity of a photovoltaic (PV) device 2014 CENELEC 02211 EN 61287-1 Railway applications - Power converters installed on board rolling stock - Part 1: Characteristics and test methods 2014 CENELEC 02212 EN 60793-1-20 Optical fibres - Part 1-20: Measurement methods and test procedures - Fibre geometry - Incorporating corrigendum March
20162014 CENELEC 0
2213 EN 60317-23 Specifications for particular types of winding wires - Part 23: Solderable polyesterimide enamelled round copper wire, class180
2014 CENELEC 0
2214 EN 50565-2 Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V (U0/U) - Part 2: Specific guidancerelated to EN 50525 cable types
2014 CENELEC 0
2215 EN 62607-3-1 Nanomanufacturing - Key control characteristics - Part 3-1: Luminescent nanomaterials - Quantum efficiency 2014 CENELEC 02216 EN 60974-10 Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements - Incorporates Amendment: 2015 2014 CENELEC 02217 EN 62670-1 Photovoltaic concentrators (CPV) - Performance testing - Part 1: Standard conditions 2014 CENELEC 02218 EN 62504 General lighting Light emitting diode (LED) products and related equipment Terms and definitions - Incorporates
Amendment A1: 20182014 CENELEC 0
2219 EN 50290-4-1 Communication cables - Part 4-1: General considerations for the use of cables - Environmental conditions and safetyaspects
2014 CENELEC 0
2220 EN 60728-14 Cable networks for television signals, sound signals and interactive services - Part 14: Optical transmission systems usingRFoG technology
2014 CENELEC 0
2221 EN 60099-4 Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems 2014 CENELEC 02222 EN 60871-1 Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V - Part 1: General 2014 CENELEC 02223 EN 61158-6-9 Industrial communication networks - Fieldbus specifications - Part 6-9: Application layer protocol specification - Type 9
elements2014 CENELEC 0
2224 EN 61784-2 Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based onISO/IEC 8802-3
2014 CENELEC 0
2225 EN 60255-121 Measuring relays and protection equipment - Part 121: Functional requirements for distance protection 2014 CENELEC 02226 EN 62841-2-2 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-2: Particular
requirements for hand-held screwdrivers and impact wrenches2014 CENELEC 0
2227 EN 62751-2 Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 2: Modularmultilevel converters
2014 CENELEC 0
2228 EN 61675-1 Radionuclide imaging devices - Characteristics and test conditions - Part 1: Positron emission tomographs 2014 CENELEC 02229 EN 62379-5-1 Common control interface for networked digital audio and video products - Part 5-1: Transmission over networks - General 2014 CENELEC 02230 EN 60068-2-75 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests 2014 CENELEC 02231 EN 61158-2 Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition 2014 CENELEC 02232 EN 61300-3-47 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-47:
Examinations and measurements - End face geometry of PC/APC spherically polished ferrules using interferometry2014 CENELEC 0
2233 EN 50625-1 Collection, logistics & Treatment requirements for WEEE - Part 1: General treatment requirements 2014 CENELEC 0
2234 EN 62707-1 LED-binning - Part 1: General requirements and white colour grid 2014 CENELEC 02235 GUIDE 1 Survey of Resolutions of the CENELEC General Assembly 2014 CENELEC 02236 EN 61331-1 Protective devices against diagnostic medical X-radiation - Part 1: Determination of attenuation properties of materials 2014 CENELEC 02237 EN 61754-7-1 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7-1: Type MPO
connector family - One fibre row2014 CENELEC 0
2238 EN 60243-2 Electric strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage 2014 CENELEC 02239 EN 61158-5-13 Industrial communication networks - Fieldbus specifications - Part 5-13: Application layer service definition - Type 13
elements2014 CENELEC 0
2240 EN 60794-4-10 Optical fibre cables - Part 4-10: Family specification - Optical ground wires (OPGW) along electrical power lines 2014 CENELEC 02241 EN 62680-4 Universal serial bus interfaces for data and power - Part 4: Universal Serial Bus Cables and Connectors Class Document,
Revision 2.02014 CENELEC 0
2242 EN 61290-10-5 Optical amplifiers - Test methods - Part 10-5: Multichannel parameters - Distributed Raman amplifier gain and noise figure 2014 CENELEC 02243 EN 61158-4-22 Industrial communication networks - Fieldbus specifications - Part 4-22: Data-link layer protocol specification - Type 22
elements2014 CENELEC 0
2244 EN 62149-8 Fibre optic active components and devices - Performance standards - Part 8: Seeded reflective semiconductor opticalamplifier devices
2014 CENELEC 0
2245 EN 60721-2-1 Classification of environmental conditions - Part 2-1: Environmental conditions appearing in nature - Temperature andHumidity
2014 CENELEC 0
2246 EN 62481-1 Digital living network alliance (DLNA) home networked device interoperability guidelines - Part 1: Architecture andprotocols
2014 CENELEC 0
2247 EN 60317-35 Specifications for particular types of winding wires - Part 35: Solderable polyurethane enamelled round copper wire, class155, with a bonding layer
2014 CENELEC 0
2248 CLC/TS 50574-2
Collection, logistics & treatment requirements for end-of-life household appliances containing volatile fluorocarbonsor volatile hydrocarbons - Part 2: specification for de-pollution
2014 CENELEC 0
2249 EN 61482-1-2 Live working - Protective clothing against the thermal hazards of an electric arc - Part 1-2: Test methods - Method 2:Determination of arc protection class of material and clothing by using a constrained and directed arc (box test)
2014 CENELEC 0
2250 EN 61158-5-3 Industrial communication networks - Fieldbus specifications - Part 5-3: Application layer service definition - Type 3elements
2014 CENELEC 0
2251 EN 60317-0-1 Specifications for particular types of winding wires - Part 0-1: General requirements - Enamelled round copper wire 2014 CENELEC 02252 EN 62841-2-4 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-4: Particular
requirements for hand-held sanders and polishers other than disc type2014 CENELEC 0
2253 EN 62343-3-3 Dynamic modules - Part 3-3: Performance specification templates - Wavelength selective switches 2014 CENELEC 02254 EN 50290-4-2 Communication cables - Part 4-2: General considerations for the use of cables - Guide to use 2014 CENELEC 02255 EN 62761 Guidelines for the measurement method of nonlinearity for surface acoustic wave (SAW) and bulk acoustic wave (BAW)
devices in radio frequency (RF)2014 CENELEC 0
2256 EN 61158-5-10 Industrial communication networks - Fieldbus specifications - Part 5-10: Application layer service definition - Type 10elements
2014 CENELEC 0
2257 EN 62148-15 Fibre optic active components and devices - Package and interface standards - Part 15: Discrete vertical cavity surfaceemitting laser packages
2014 CENELEC 0
2258 EN 60770-3 Transmitters for use in industrial-process control systems - Part 3: Methods for performance evaluation of intelligenttransmitters - Remains Current
2014 CENELEC 0
2259 EN 61158-6-10 Industrial communication networks - Fieldbus specifications - Part 6-10: Application layer protocol specification - Type 10elements
2014 CENELEC 0
2260 EN 62146-1 Grading capacitors for high-voltage alternating current circuit-breakers - Part 1: General - Incorporates Amendment A1:2016
2014 CENELEC 0
2261 EN 60317-0-2 Specifications for particular types of winding wires - Part 0-2: General requirements - Enamelled rectangular copper wire 2014 CENELEC 0
2262 CLC/TR 50623 Railway applications - Functional Interface Specification - Door System 2014 CENELEC 02263 EN 62321-3-2 Determination of certain substances in electrotechnical products - Part 3-2: Screening - Total bromine in polymers and
electronics by Combustion - Ion Chromatography2014 CENELEC 0
2264 EN 61158-4-24 Industrial communication networks - Fieldbus specifications - Part 4-24: Data-link layer protocol specification - Type 24elements
2014 CENELEC 0
2265 EN 60870-6-802
Telecontrol equipment and systems - Part 6-802: Telecontrol protocols compatible with ISO standards and ITU-Trecommendations - TASE.2 Object models
2014 CENELEC 0
2266 EN 62747 Terminology for voltage-sourced converters (VSC) for high-voltage direct current (HVDC) systems 2014 CENELEC 02267 EN 61169-45 Radio-frequency connectors -Part 45: Sectional specification for series SQMA series quick lock RF coaxial connectors 2014 CENELEC 02268 EN 62353 Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment 2014 CENELEC 02269 EN 61158-3-24 Industrial communication networks - Fieldbus specifications - Part 3-24: Data-link layer service definition - Type-24
elements2014 CENELEC 0
2270 EN 61158-4-2 Industrial communication networks - Fieldbus specifications -Part 4-2: Data-link layer protocol specification - Type 2elements
2014 CENELEC 0
2271 EN 61158-3-1 Industrial communication networks - Fieldbus specifications - Part 3-1: Data-link layer service definition - Type 1 elements 2014 CENELEC 02272 EN 61375-3-4 Electronic railway equipment - Train communication network (TCN) - Part 3-4: Ethernet Consist Network (ECN) -
Incorporates Amendment A1: 20172014 CENELEC 0
2273 EN 62676-1-1 Video surveillance systems for use in security applications - Part 1-1: System requirements - General 2014 CENELEC 02274 EN 50131-10 Alarm systems - Intrusion and hold-up systems - Part 10: Application specific requirements for Supervised Premises
Transceiver (SPT)2014 CENELEC 0
2275 EN 60079-17 Explosive atmospheres - Part 17: Electrical installations inspection and maintenance 2014 CENELEC 02276 EN 62035 Discharge lamps (excluding fluorescent lamps) - Safety specifications 2014 CENELEC 02277 EN 61331-2 Protective devices against diagnostic medical X-radiation - Part 2: Translucent protective plates 2014 CENELEC 02278 EN 61577-4 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 4: Equipment for the
production of reference atmospheres containing radon isotopes and their decay products (STAR)2014 CENELEC 0
2279 EN 60034-30-1 Rotating electrical machines - Part 30-1: Efficiency classes of line operated AC motors (IE code) 2014 CENELEC 02280 EN 60191-4 Mechanical standardization of semiconductor devices - Part 4: Coding system and classification into forms of package
outlines for semiconductor device packages - Incorporates Amendment A1: 20182014 CENELEC 0
2281 EN 61158-5-5 Industrial communication networks - Fieldbus specifications - Part 5-5: Application layer service definition - Type 5elements
2014 CENELEC 0
2282 EN 50636-2-92 Household and similar electrical appliances - Safety - Part 2-92: Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators
2014 CENELEC 0
2283 EN 60317-27 Specifications for particular types of winding wires - Part 27: Paper tape covered rectangular copper wire 2014 CENELEC 02284 EN 62368-1 Audio/video, information and communication technology equipment - Part 1: Safety requirements - Incorporates
Amendment A11: 20172014 CENELEC 0
2285 EN 62047-21 Semiconductor devices - Micro-electromechanical devices - Part 21: Test method for Poissons ratio of thin film MEMSmaterials
2014 CENELEC 0
2286 EN 60243-3 Electric strength of insulating materials - Test methods - Part 3: Additional requirements for 1,2/50 خ_s impulse tests 2014 CENELEC 02287 EN 61158-5-14 Industrial communication networks - Fieldbus specifications - Part 5-14: Application layer service definition - Type 14
elements2014 CENELEC 0
2288 EN 50625-2-1 Collection, logistics and treatment requirements for WEEE - Part 2-1: Treatment requirements for lamps 2014 CENELEC 02289 EN 61076-2-
109Connectors for electronic equipment - Product requirements - Part 2-109: Circular connectors - Detail specification forconnectors with M 12 1 _أ screw-locking, for data transmission frequencies up to 500 MHz
2014 CENELEC 0
2290 EN 61858-2 Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) -Part 2: Form-wound EIS
2014 CENELEC 0
2291 EN 60127-6 Miniature fuses - Part 6: Fuse-holders for miniature fuse-links 2014 CENELEC 0
2292 EN 60721-2-3 Classification of environmental conditions - Part 2-3: Environmental conditions appearing in nature - Air pressure 2014 CENELEC 02293 EN 60507 Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems 2014 CENELEC 02294 EN 62386-103 Digital addressable lighting interface - Part 103: General requirements - Control devices 2014 CENELEC 02295 EN 61481-1 Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. 2014 CENELEC 02296 EN 62149-2 Fibre optic active components and devices - Performance standards - Part 2: 850 nm discrete vertical cavity surface
emitting laser devices2014 CENELEC 0
2297 EN 61158-6-12 Industrial communication networks - Fieldbus specifications - Part 6-12: Application layer protocol specification - Type 12elements
2014 CENELEC 0
2298 EN 62798 Industrial electroheating equipment - Test methods for infrared emitters - Incorporating corrigendum November 2014 2014 CENELEC 02299 EN 60268-4 Sound system equipment - Part 4: Microphones 2014 CENELEC 02300 EN 62271-201 High-voltage switchgear and controlgear - Part 201: AC solidinsulation enclosed switchgear and controlgear for rated
voltages above 1 kV and up to and including 52 kV2014 CENELEC 0
2301 EN 61851-23 Electric vehicle conductive charging system - Part 23: DC electric vehicle charging station 2014 CENELEC 02302 EN 61158-5-19 Industrial communication networks - Fieldbus specifications - Part 5-19: Application layer service definition - Type 19
elements2014 CENELEC 0
2303 EN 50600-2-2 Information technology - Data centre facilities and infrastructures - Part 2-2: Power distribution 2014 CENELEC 02304 EN 50436-1 Alcohol interlocks - Test methods and performance requirements - Part 1: Instruments for drink-driving-offender programs 2014 CENELEC 02305 EN 50575 Power, control and communication cables - Cables for general applications in construction works subject to reaction to fire
requirements - Incorporates Amendment A1: 20162014 CENELEC 0
2306 EN 61158-5-4 Industrial communication networks - Fieldbus specifications - Part 5-4: Application layer service definition - Type 4elements
2014 CENELEC 0
2307 EN 62751-1 Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 1: Generalrequirements - Incorporates Amendment A1: 2018
2014 CENELEC 0
2308 EN 60870-6-702
Telecontrol equipment and systems - Part 6-702: Telecontrol protocols compatible with ISO standards and ITU-Trecommendations - Functional profile for providing the TASE.2 application service in end systems
2014 CENELEC 0
2309 CLC/TR 50619 Guidance on how to conduct Round Robin Tests 2014 CENELEC 02310 EN 61158-6-19 Industrial communication networks - Fieldbus specifications - Part 6-19: Application layer protocol specification - Type 19
elements2014 CENELEC 0
2311 EN 50436-2 Alcohol interlocks - Test methods and performance requirements - Part 2: Instruments having a mouthpiece and measuringbreath alcohol for general preventive use - Incorporates Amendment A1: 2015
2014 CENELEC 0
2312 EN 62047-20 Semiconductor devices - Micro-electromechanical devices - Part 20: Gyroscopes 2014 CENELEC 02313 EN 61839 Nuclear power plants - Design of control rooms - Functional analysis and assignment 2014 CENELEC 02314 EN 60794-2-20 Optical fibre cables - Part 2-20: Indoor cables - Family specification for multi-fibre optical cables 2014 CENELEC 02315 EN 62481-2 Digital living network alliance (DLNA) home networked device interoperability guidelines - Part 2: DLNA media formats 2014 CENELEC 02316 EN 61968-9 Application integration at electric utilities - System interfaces for distribution management - Part 9: Interfaces for meter
reading and control2014 CENELEC 0
2317 EN 50636-2-91 Household and similar electrical appliances - Safety - Part 2-91: Particular requirements for walk-behind and hand-heldlawn trimmers and lawn edge trimmers
2014 CENELEC 0
2318 EN 62676-2-1 Video surveillance systems for use in security applications - Part 2-1: Video transmission protocols - General requirements 2014 CENELEC 02319 EN 62148-17 Fiber optic active components and devices - Package and interface standards - Part 17: Transmitter and receiver
components with dual coaxial RF connectors2014 CENELEC 0
2320 EN 61158-4-3 Industrial communication networks - Fieldbus specifications - Part 4-3: Data-link layer protocol specification - Type 3elements
2014 CENELEC 0
2321 EN 61331-3 Protective devices against diagnostic medical X-radiation - Part 3: Protective clothing, eyewear and protective patientshields
2014 CENELEC 0
2322 EN 61158-5-9 Industrial communication networks - Fieldbus specifications - Part 5-9: Application layer service definition - Type 9elements
2014 CENELEC 0
2323 EN 60065 Audio, video and similar electronic apparatus - Safety requirements - Incorporates Amendment A11: 2017; RemainsCurrent
2014 CENELEC 0
2324 EN 61158-3-12 Industrial communication networks - Fieldbus specifications - Part 3-12: Data-link layer service definition - Type 12elements
2014 CENELEC 0
2325 EN 61000-3-2 Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input currentâ_¤ 16 A per phase)
2014 CENELEC 0
2326 EN 50153 Railway applications - Rolling stock - Protective provisions relating to electrical hazards - Incorporates Amendment A1:2017
2014 CENELEC 0
2327 EN 60317-20 Specifications for particular types of winding wires - Part 20: Solderable polyurethane enamelled round copper wire, class155
2014 CENELEC 0
2328 EN 60317-36 Specifications for particular types of winding wires - Part 36: Solderable polyesterimide enamelled round copper wire, class180, with a bonding layer
2014 CENELEC 0
2329 EN 62047-22 Semiconductor devices - Micro-electromechanical devices - Part 22: Electromechanical tensile test method for conductivethin films on flexible substrates
2014 CENELEC 0
2330 EN 60831-2 Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V - Part 2:Ageing test, self-healing test and destruction test
2014 CENELEC 0
2331 CLC/TS 50560 Interoperability framework requirement specification 2014 CENELEC 02332 EN 61753-053-
2Fibre optic interconnecting devices and passive components - Performance standard - Part 053-2: Non-connectorizedsinglemode fibre, electrically controlled, variable optical attenuator for category C - Controlled environments
2014 CENELEC 0
2333 EN 61481-2 Live working - Phase comparators - Part 2: Resistive type to be used for voltages from 1 kV to 36 kV a.c. 2014 CENELEC 02334 EN 62321-4 Determination of certain substances in electrotechnical products - Part 4: Mercury in polymers, metals and electronics by
CV-AAS, CV-AFS, ICP-OES and ICP-MS - Incorporates Amendment A1: 20172014 CENELEC 0
2335 EN 62321-2 Determination of certain substances in electrotechnical products - Part 2: Disassembly, disjointment and mechanical samplepreparation
2014 CENELEC 0
2336 EN 60794-5-20 Optical fibre cables - Part 5-20: Family specification - Outdoor microduct fibre units, microducts and protected microductsfor installation by blowing
2014 CENELEC 0
2337 EN 60728-1 Cable networks for television signals, sound signals and interactive services - Part 1: System performance of forward paths 2014 CENELEC 02338 EN 62282-4-
101Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary powerunits (APU) - Safety of electrically powered industrial trucks
2014 CENELEC 0
2339 EN 61158-6-13 Industrial communication networks - Fieldbus specifications - Part 6-13: Application layer protocol specification - Type 13elements
2014 CENELEC 0
2340 EN 61158-5-20 Industrial communication networks - Fieldbus specifications - Part 5-20: Application layer service definition - Type 20elements
2014 CENELEC 0
2341 EN 62841-2-5 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-5: Particularrequirements for hand-held circular saws
2014 CENELEC 0
2342 EN 60794-2-51 Optical fibre cables - Part 2-51: Indoor cables - Detail specification for simplex and duplex cables for use in cords forcontrolled environment
2014 CENELEC 0
2343 EN 50600-2-1 Information technology - Data centre facilities and infrastructures - Part 2-1: Building construction 2014 CENELEC 02344 EN 60079-31 Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t" 2014 CENELEC 02345 EN 62116 Utility-interconnected photovoltaic inverters - Test procedure of islanding prevention measures 2014 CENELEC 02346 EN 61158-6-22 Industrial communication networks - Fieldbus specifications - Part 6-22: Application layer protocol specification - Type 22
elements2014 CENELEC 0
2347 CLC/TR 50609 Technical Guidelines for Radial HVDC Networks 2014 CENELEC 02348 CLC/TR 50610 Railway applications - Train Modes functional interface specification 2014 CENELEC 02349 EN 60099-9 Surge arresters - Part 9: Metal-oxide surge arresters without gaps for HVDC converter stations 2014 CENELEC 0
2350 EN 61300-3-51 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-51:Examinations and measurements - Pin gauge withdrawal force for rectangular ferrule multi-fibre connectors
2014 CENELEC 0
2351 EN 61587-5 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 5: Seismic tests for chassis,subracks and plug-in units
2014 CENELEC 0
2352 EN 50407-3 Multi-pair cables used in high bit rate digital access telecommunications networks - Part 3: Indoor multi-pair/quad risercables up to 100 MHz for maximum length of connection 100 m supporting universal services, xDSL and applications upto 100 Mbit/s ove
2014 CENELEC 0
2353 EN 61158-5-12 Industrial communication networks - Fieldbus specifications - Part 5-12: Application layer service definition - Type 12elements
2014 CENELEC 0
2354 EN 62021-3 Insulating liquids - Determination of acidity - Part 3: Test methods for non mineral insulating oils 2014 CENELEC 02355 EN 60831-1 Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V - Part 1:
General - Performance, testing and rating - Safety requirements - Guide for installation and operation2014 CENELEC 0
2356 EN 62676-2-3 Video surveillance systems for use in security applications - Part 2-3: Video transmission protocols - IP interoperabilityimplementation based on Web services
2014 CENELEC 0
2357 EN 61158-4-11 Industrial communication networks - Fieldbus specifications - Part 4-11: Data-link layer protocol specification - Type 11elements
2014 CENELEC 0
2358 EN 61784-5-17 Industrial communication networks - Profiles - Part 5-17: Installation of fieldbuses - Installation profiles for CPF 17 2013 CENELEC 02359 EN 62047-18 Semiconductor devices - Micro-electromechanical devices - Part 18: Bend testing methods of thin film materials 2013 CENELEC 02360 EN 62047-11 Semiconductor devices - Micro-electromechanical devices - Part 11: Test method for coefficients of linear thermal
expansion of free-standing materials for micro-electromechanical systems2013 CENELEC 0
2361 EN 62680-3 Universal serial bus interfaces for data and power - Part 3: USB battery charging specification, Revision 1.2 2013 CENELEC 02362 CLC/TR 50117-
8Coaxial cables used in cabled distribution networks - Part 8: Repair and substitute of damaged buried cables 2013 CENELEC 0
2363 EN 62673 Methodology for communication network dependability assessment and assurance 2013 CENELEC 02364 EN 61558-2-26 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-26: Particular requirements and tests
for transformers and power supply units for saving energy and other purposes2013 CENELEC 0
2365 EN 61326-2-6 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements -In vitro diagnostic (IVD) medical equipment
2013 CENELEC 0
2366 EN 61753-088-2
Fibre optic interconnecting devices and passive components - Performance standard - Part 088-2: Non-connectorizedsingle-mode fibre optic LAN WDM devices with channel spacing of 800 GHz for category C - Controlled environments
2013 CENELEC 0
2367 EN 61191-1 Printed board assemblies - Part 1: Generic specification - Requirements for soldered electrical and electronic assembliesusing surface mount and related assembly technologies
2013 CENELEC 0
2368 EN 61472 Live working - Minimum approach distances for a.c systems in the voltage range 72,5 kV to 800 kV - A method ofcalculation
2013 CENELEC 0
2369 EN 61326-2-2 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements -Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipmentused in lo
2013 CENELEC 0
2370 EN 61788-12 Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio ofNb3Sn composite superconducting wires
2013 CENELEC 0
2371 EN 60848 GRAFCET specification language for sequential function charts 2013 CENELEC 02372 EN 62598 Nuclear instrumentation - Constructional requirements and classification of radiometric gauges 2013 CENELEC 02373 EN 50332-1 Sound system equipment: Headphones and earphones associated with personal music players - Maximum sound pressure
level measurement methodology - Part 1: General method for "one package equipment"2013 CENELEC 0
2374 EN 62629-22-1 3D display devices - Part 22-1: Measuring methods for autostereoscopic displays - Optical 2013 CENELEC 02375 HD 60269-2 Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial
application) - Examples of standardized systems of fuses A to K2013 CENELEC 0
2376 EN 60216-1 Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results 2013 CENELEC 0
2377 EN 60974-7 Arc welding equipment - Part 7:Torches 2013 CENELEC 02378 EN 60974-5 Arc welding equipment - Part 5: Wire feeders 2013 CENELEC 02379 EN 50288-4-2 Multi-element metallic cables used in analogue and digital communication and control - Part 4-2: Sectional specification
for screened cables characterised up to 600 MHz - Work area and patch cord cables2013 CENELEC 0
2380 EN 62680-1 Universal serial bus interfaces for data and power - Part 1: Universal serial bus specification, revision 2.0 2013 CENELEC 02381 EN 60695-9-1 Fire hazard testing - Part 9-1: Surface spread of flame - General guidance 2013 CENELEC 02382 EN 61850-10 Communication networks and systems for power utility automation - Part 10: Conformance testing 2013 CENELEC 02383 EN 61753-051-
3Fibre optic interconnecting devices and passive components - Performance standard - Part 051-3: Single-mode fibre, plugstyle fixed attenuators for category U - Uncontrolled environment
2013 CENELEC 0
2384 EN 62068 Electrical insulating materials and systems - General method of evaluation of electrical endurance under repetitive voltageimpulses
2013 CENELEC 0
2385 EN 61784-5-16 Industrial communication networks - Profiles - Part 5-16: Installation of fieldbuses - Installation profiles for CPF 16 2013 CENELEC 02386 EN 61918 Industrial communication networks - Installation of communication networks in industrial premises - Incorporating
corrigendum May 20142013 CENELEC 0
2387 EN 61169-44 Radio-frequency connectors - Part 44: Sectional specification for series SMP push-on radio-frequency coaxial connectors 2013 CENELEC 02388 EN 50050-2 Electrostatic hand-held spraying equipment - Safety requirements - Part 2: Hand-held spraying equipment for ignitable
coating powder2013 CENELEC 0
2389 EN 62215-3 Integrated circuits - Measurement of impulse immunity - Part 3: Non-synchronous transient injection method 2013 CENELEC 02390 EN 60076-14 Power transformers - Part 14: Liquid-immersed power transformers using high-temperature insulation materials 2013 CENELEC 02391 EN 60444-6 Measurement of quartz crystal unit parameters - Part 6: Measurement of drive level dependence (DLD) 2013 CENELEC 02392 EN 50355 Railway applications - Railway rolling stock cables having special fire performance - Guide to use 2013 CENELEC 02393 EN 61360-2 Standard data element types with associated classification scheme for electric components - Part 2: EXPRESS dictionary
schema2013 CENELEC 0
2394 EN 61747-10-1 Liquid crystal display devices - Part 10-1: Environmental, endurance and mechanical test methods - Mechanical 2013 CENELEC 02395 EN 60679-3 Quartz crystal controlled oscillators of assessed quality - Part 3: Standard outlines and lead connections 2013 CENELEC 02396 EN 61169-1 Radio-frequency connectors - Part 1: Generic specification - General requirements and measuring methods 2013 CENELEC 02397 EN 61753-058-
2Fibre optic interconnecting devices and passive components - Performance standard - Part 058-2: Single mode fibrepigtailed style optical power limiter for category C - Controlled environment
2013 CENELEC 0
2398 EN 61753-057-2
Fibre optic interconnecting devices and passive components - Performance standard - Part 057-2: Single mode fibre plug-receptacle style optical fuse for category C - Controlled environment
2013 CENELEC 0
2399 EN 60704-2-14 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-14:Particular requirements for refrigerators, frozen-food storage cabinets and food freezers - Incorporates Amendment A11:2015
2013 CENELEC 0
2400 EN 60947-5-3 Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements forproximity devices with defined behaviour under fault conditions (PDDB)
2013 CENELEC 0
2401 EN 60469 Transitions, pulses and related waveforms - Terms, definitions and algorithms 2013 CENELEC 02402 EN 61753-056-
2Fibre optic interconnecting devices and passive components - Performance standard - Part 056-2: Single mode fibrepigtailed style optical fuse for category C - Controlled environment
2013 CENELEC 0
2403 EN 61784-5-1 Industrial communication networks - Profiles - Part 5-1: Installation of fieldbuses - Installation profiles for CPF 1 2013 CENELEC 02404 EN 60743 Live working - Terminology for tools, devices and equipment 2013 CENELEC 02405 EN 62703 Expression of performance of fluorometric oxygen analyzers in liquid media 2013 CENELEC 02406 EN 50600-2-4 Information technology - Data centre facilities and infrastructures - Part 2-4: Telecommunications cabling infrastructure 2013 CENELEC 02407 EN 50288-1 Multi-element metallic cables used in analogue and digital communication and control - Part 1: Generic specification 2013 CENELEC 02408 EN 60422 Mineral insulating oils in electrical equipment - Supervision and maintenance guidance 2013 CENELEC 02409 EN 60068-2-65 Environmental testing - Part 2-65: Tests - Test Fg: Vibration - Acoustically induced method 2013 CENELEC 0
2410 CLC/TR 50608 Smart grid projects in Europe 2013 CENELEC 02411 EN 50288-3-2 Multi-element metallic cables used in analogue and digital communication and control - Part 3-2: Sectional specification
for unscreened cables characterised up to 100 MHz - Work area and patch cord cables2013 CENELEC 0
2412 EN 61300-2-7 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-7: Tests -Bending moment
2013 CENELEC 0
2413 EN 60519-10 Safety in electroheating installations - Part 10: Particular requirements for electrical resistance trace heating systems forindustrial and commercial applications
2013 CENELEC 0
2414 EN 62444 Cable glands for electrical installations 2013 CENELEC 02415 EN 50539-11 Low-voltage surge protective devices - Surge protective devices for specific application including d.c. - Part 11:
Requirements and tests for SPDs in photovoltaic applications - Incorporates Amendment A1: 20142013 CENELEC 0
2416 CLC/TS 50539-12
Low-voltage surge protective devices - Surge protective devices for specific application including d.c. - Part 12: Selectionand application principles - SPDs connected to photovoltaic installations
2013 CENELEC 0
2417 EN 62606 General requirements for arc fault detection devices - Incorporates Amendment A1: 2017 2013 CENELEC 02418 EN 62364 Hydraulic machines - Guide for dealing with hydro-abrasive erosion in Kaplan, Francis, and Pelton turbines 2013 CENELEC 02419 EN 62488-1 Power line communication systems for power utility applications - Part 1: Planning of analogue and digital power line
carrier systems operating over EHV/HV/MV electricity grids2013 CENELEC 0
2420 EN 61499-2 Function blocks - Part 2: Software tool requirements 2013 CENELEC 02421 EN 61753-021-
3Fibre optic interconnecting devices and passive components - Performance standard - Part 021-3: Single-mode fibre opticconnectors for category U - Uncontrolled environment
2013 CENELEC 0
2422 EN 62739-1 Test method for erosion of wave soldering equipment using molten lead-free solder alloy - Part 1: Erosion test method formetal materials without surface processing
2013 CENELEC 0
2423 EN 62264-1 Enterprise-control system integration - Part 1: Models and terminology 2013 CENELEC 02424 EN 60068-2-78 Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state 2013 CENELEC 02425 EN 50292 Electrical apparatus for the detection of carbon monoxide in domestic premises, caravans and boats - Guide on the
selection, installation, use and maintenance2013 CENELEC 0
2426 EN 60947-7-4 Low-voltage switchgear and controlgear - Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors 2013 CENELEC 02427 EN 50411-3-6 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-6:
Multimode mechanical fibre splice for use in an outdoor protected environment (Cat U)2013 CENELEC 0
2428 EN 60358-2 Coupling capacitors and capacitor dividers - Part 2: AC or DC single-phase coupling capacitor connected between line andground for power line carrier-frequency (PLC) application
2013 CENELEC 0
2429 EN 61784-5-14 Industrial communication networks - Profiles - Part 5-14: Installation of fieldbuses - Installation profiles for CPF 14 2013 CENELEC 02430 EN 61207-7 Expression of performance of gas analyzers - Part 7: Tuneable semiconductor laser gas analyzers 2013 CENELEC 02431 EN 50050-1 Electrostatic hand-held spraying equipment - Safety requirements - Part 1: Hand-held spraying equipment for ignitable
liquid coating materials2013 CENELEC 0
2432 EN 62567 Overhead lines - Methods for testing self-damping characteristics of conductors 2013 CENELEC 02433 EN 62610-4 Mechanical structures for electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC
60917 series - Part 4: Cooling performance tests for water supplied heat exchangers in electronic cabinets2013 CENELEC 0
2434 EN 61993-2 Maritime navigation and radiocommunication equipment and systems - Automatic Identification Systems (AIS) - Part 2:Class A shipborne equipment of the automatic identification system (AIS) - Operational and performance requirements,methods of test and re
2013 CENELEC 0
2435 EN 62506 Methods for product accelerated testing 2013 CENELEC 02436 EN 60598-2-12 Luminaires - Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights 2013 CENELEC 02437 EN 62321-1 Determination of certain substances in electrotechnical products - Part 1: Introduction and overview 2013 CENELEC 02438 EN 62623 Desktop and notebook computers - Measurement of energy consumption 2013 CENELEC 02439 EN 61496-2 Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active
opto-electronic protective devices (AOPDs)2013 CENELEC 0
2440 EN 61249-2-39 Materials for printed boards and other interconnecting structures - Part 2-39: Reinforced base materials clad and unclad -High performance epoxide and non-epoxide, woven E-glass laminate sheets of defined flammability (vertical burning test),copper-clad
2013 CENELEC 0
2441 EN 60601-2-22 Medical electrical equipment - Part 2-22: Particular requirements for basic safety and essential performance of surgical,cosmetic, therapeutic and diagnostic laser equipment
2013 CENELEC 0
2442 EN 50561-1 Power line communication apparatus used in low-voltage installations - Radio disturbance characteristics - Limits andmethods of measurement - Part 1: Apparatus for in-home use - Incorporating corrigendum January 2015
2013 CENELEC 0
2443 EN 62271-101 High-voltage switchgear and controlgear - Part 101: Synthetic testing - Incorporates Amendment A1: 2018 2013 CENELEC 02444 EN 61000-3-3 Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in
public low-voltage supply systems, for equipment with rated current â_¤ 16 A per phase and not subject to conditionalconnection
2013 CENELEC 0
2445 EN 50110-1 Operation of electrical installations - Part 1: General requirements 2013 CENELEC 02446 EN 60598-2-11 Luminaires - Part 2-11: Particular requirements - Aquarium luminaires 2013 CENELEC 02447 EN 61850-5 Communication networks and systems for power utility automation - Part 5: Communication requirements for functions
and device models2013 CENELEC 0
2448 EN 61672-2 Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests - Incorporates Amendment A1: 2017 2013 CENELEC 02449 EN 55015 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment -
Incorporates Amendment A1: 20152013 CENELEC 0
2450 EN 62542 Environmental standardization for electrical and electronic products and systems - Glossary of terms 2013 CENELEC 02451 EN 62026-7 Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 7: CompoNet 2013 CENELEC 02452 EN 62664-1-1 Fibre optic interconnecting devices and passive components - Fibre optic connector product specifications - Part 1-1: LC-
PC duplex multimode connectors terminated on IEC 60793-2-10 category A1a fibre2013 CENELEC 0
2453 EN 60076-3 Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air - Incorporates Amendment A1:2018
2013 CENELEC 0
2454 EN 61300-2-19 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19: Tests -Damp heat (steady state)
2013 CENELEC 0
2455 EN 61643-312 Components for low-voltage surge protective devices - Part 312: Selection and application principles for gas dischargetubes
2013 CENELEC 0
2456 EN 62037-6 Passive RF and microwave devices, intermodulation level measurement - Part 6: Measurement of passive intermodulationin antennas
2013 CENELEC 0
2457 EN 62047-19 Semiconductor devices - Micro-electromechanical devices - Part 19: Electronic compasses 2013 CENELEC 02458 EN 50571 Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines -
Incorporates Amendment A1: 20182013 CENELEC 0
2459 EN 61753-089-2
Fibre optic interconnecting devices and passive components - Performance standard - Part 089-2: Non-connectorizedsingle-mode bidirectional OTDR monitoring WWDM devices for category C - Controlled environment
2013 CENELEC 0
2460 EN 60384-14 Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagneticinterference suppression and connection to the supply mains - Incorporates Amendment A1: 2016
2013 CENELEC 0
2461 EN 61326-2-1 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements -Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMCunprotected
2013 CENELEC 0
2462 EN 61784-5-13 Industrial communication networks - Profiles - Part 5-13: Installation of fieldbuses - Installation profiles for CPF 13 2013 CENELEC 02463 EN 62341-5-3 Organic Light Emitting Diode (OLED) displays - Part 5-3: Measuring methods of image sticking and lifetime 2013 CENELEC 02464 EN 61754-1 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 1: General and
guidance2013 CENELEC 0
2465 EN 60286-4 Packaging of components for automatic handling - Part 4: Stick magazines for electronic components encapsulated inpackages of different forms
2013 CENELEC 0
2466 EN 50547 Railway applications - Batteries for auxiliary power supply systems 2013 CENELEC 0
2467 EN 62698 Multimedia home server systems - Rights information interoperability for IPTV 2013 CENELEC 02468 EN 61300-3-48 Fibre optic interconnect devices and passive components - Basic test and measurement procedures - Part 3-48:
Examinations and measurements - Spring compression force of the coupling sleeve for rectangular ferrule multi-fibreconnectors
2013 CENELEC 0
2469 CLC/TR 62258-4
Semiconductor die products - Part 4: Questionnaire for die users and suppliers 2013 CENELEC 0
2470 EN 62629-1-2 3D Display devices - Part 1-2: Generic - Terminology and letter symbols 2013 CENELEC 02471 EN 62343-1-3 Dynamic modules - Part 1-3: Performance standards - Dynamic gain tilt equalizer (non-connectorized) 2013 CENELEC 02472 EN 61212-3-1 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes -
Part 3: Specifications for individual materials - Sheet 1: Round laminated rolled tubes2013 CENELEC 0
2473 EN 61249-2-30 Materials for printed boards and other interconnecting structures - Part 2-30: Reinforced base materials clad and unclad -Non-halogenated epoxide modified cyanate ester woven glass laminate of defined flammability (vertical burning test),copper-clad
2013 CENELEC 0
2474 EN 61249-4-19 Materials for printed boards and other interconnecting structures - Part 4-19: Sectional specification set for prepregmaterials, unclad (for the manufacture of multilayer boards) - High performance non-halogenated epoxide woven E-glassprepreg of defined
2013 CENELEC 0
2475 EN 61710 Power law model - Goodness-of-fit tests and estimation methods 2013 CENELEC 02476 EN 60243-1 Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies 2013 CENELEC 02477 EN 61587-3 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 3: Electromagnetic shielding
performance tests for cabinets and subracks2013 CENELEC 0
2478 EN 62271-112 High-voltage switchgear and controlgear - Part 112: Alternating current high-speed earthing switches for secondary arcextinction on transmission lines
2013 CENELEC 0
2479 EN 50290-2-23 Communication cables - Part 2-23: Common design rules and construction - Polyethylene insulation for multi-pair cablesused in access telecommunication networks: Outdoor cables
2013 CENELEC 0
2480 EN 50288-2-2 Multi-element metallic cables used in analogue and digital communication and control - Part 2-2: Sectional specificationfor screened cables characterised up to 100 MHz - Work area and patch cord cables
2013 CENELEC 0
2481 EN 60335-2-34 Household and similar electrical appliances Safety Part 2-34: Particular requirements for motor-compressors 2013 CENELEC 02482 EN 61121 Tumble dryers for household use - Methods for measuring the performance 2013 CENELEC 02483 EN 62388 Maritime navigation and radiocommunication equipment and systems - Shipborne radar - Performance requirements,
methods of testing and required test results2013 CENELEC 0
2484 EN 62133 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealedsecondary cells, and for batteries made from them, for use in portable applications - Remains Current
2013 CENELEC 0
2485 EN 61300-3-50 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-50:Examinations and measurements - Crosstalk for optical spatial switches
2013 CENELEC 0
2486 EN 50541-2 Three phase dry-type distribution transformers 50 Hz, from 100 kVA to 3 150 kVA, with highest voltage for equipment notexceeding 36 kV - Part 2: Determination of loadability of a transformer loaded with nonsinusoidal current
2013 CENELEC 0
2487 EN 61300-2-52 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-52: Tests -Bending test for cords
2013 CENELEC 0
2488 EN 50518-3 Monitoring and alarm receiving centre - Part 3: Procedures and requirements for operation 2013 CENELEC 02489 EN 61643-311 Components for low-voltage surge protective devices - Part 311: Performance requirements and test circuits for gas
discharge tubes (GDT)2013 CENELEC 0
2490 EN 62037-5 Passive RF and microwave devices, intermodulation level measurement - Part 5: Measurement of passive intermodulationin filters
2013 CENELEC 0
2491 EN 50569 Household and similar electrical appliances - Safety - Particular requirements for commercial electric spin extractors -Incorporates Amendment A1: 2018
2013 CENELEC 0
2492 EN 61753-059-2
Fibre optic interconnecting devices and passive components - Performance standard - Part 059-2: Single-mode fibre plug-receptacle style optical limiter for category C - Controlled environment
2013 CENELEC 0
2493 EN 61326-1 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements 2013 CENELEC 02494 EN 61784-5-11 Industrial communication networks - Profiles - Part 5-11: Installation of fieldbuses - Installation profiles for CPF 11 2013 CENELEC 02495 EN 62612 Self-ballasted LED lamps for general lighting services with supply voltages > 50 V - Performance requirements -
Incorporates Amendment A11: 20172013 CENELEC 0
2496 EN 50050-3 Electrostatic hand-held spraying equipment - Safety requirements - Part 3: Hand-held spraying equipment for ignitableflock
2013 CENELEC 0
2497 EN 50578 Railways applications - Direct current signalling relays 2013 CENELEC 02498 EN 62271-4 High-voltage switchgear and controlgear - Part 4: Handling procedures for sulphur hexafluoride (SF6) and its mixtures 2013 CENELEC 02499 EN 60204-31 Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing
machines, units and systems2013 CENELEC 0
2500 EN 61924-2 Maritime navigation and radiocommunication equipment and systems - Integrated navigation systems - Part 2: Modularstructure for INS - Operational and performance requirements, methods of testing and required test results
2013 CENELEC 0
2501 EN 62552 Household refrigerating appliances - Characteristics and test methods 2013 CENELEC 02502 EN 60549 High-voltage fuses for the external protection of shunt capacitors 2013 CENELEC 02503 EN 61400-12-2 Wind turbines - Part 12-2: Power performance of electricity-producing wind turbines based on nacelle anemometry 2013 CENELEC 02504 EN 50288-2-1 Multi-element metallic cables used in analogue and digital communication and control - Part 2-1: Sectional specification
for screened cables characterised up to 100 MHz - Horizontal and building backbone cables2013 CENELEC 0
2505 EN 60721-2-2 Classification of environmental conditions - Part 2-2: Environmental conditions appearing in nature - Precipitation andwind
2013 CENELEC 0
2506 EN 61347-2-9 Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excludingfluorescent lamps)
2013 CENELEC 0
2507 EN 50290-2-25 Communication cables - Part 2-25: Common design rules and construction - Polypropylene insulation compounds 2013 CENELEC 02508 EN 61968-100 Application integration at electric utilities - System interfaces for distribution management - Part 100: Implementation
profiles2013 CENELEC 0
2509 EN 61249-2-27 Materials for printed boards and other interconnecting structures - Part 2-27: Reinforced base materials clad and unclad -Bismaleimide/triazine modified with non-halogenated epoxide woven glass laminate sheets of defined flammability(vertical burning te
2013 CENELEC 0
2510 EN 61249-4-18 Materials for printed boards and other interconnecting structures - Part 4-18: Sectional specification set for prepregmaterials, unclad (for the manufacture of multilayer boards) - High performance epoxide woven E-glass prepreg of definedflammability (v
2013 CENELEC 0
2511 EN 62595-2 LCD backlight unit - Part 2: Electro-optical measurement methods of LED backlight unit 2013 CENELEC 02512 EN 60216-8 Electrical insulating materials - Thermal endurance properties - Part 8: Instructions for calculating thermal endurance
characteristics using simplified procedures2013 CENELEC 0
2513 EN 50083-8 Cable networks for television signals, sound signals and interactive services - Part 8: Electromagnetic compatibility fornetworks
2013 CENELEC 0
2514 EN 62056-9-7 Electricity metering data exchange - The DLMS/COSEM suite - Part 9-7: Communication profile for TCP-UDP/IPnetworks
2013 CENELEC 0
2515 EN 60974-2 Arc welding equipment - Part 2: Liquid cooling systems 2013 CENELEC 02516 EN 61788-18 Superconductivity - Part 18: Mechanical properties measurement - Room temperature tensile test of Ag- and/or Ag alloy-
sheathed Bi-2223 and Bi-2212 composite superconductors2013 CENELEC 0
2517 EN 61427-1 Secondary cells and batteries for renewable energy storage - General requirements and methods of test - Part 1:Photovoltaic off-grid application
2013 CENELEC 0
2518 EN 50518-2 Monitoring and alarm receiving centre - Part 2: Technical requirements 2013 CENELEC 02519 EN 62217 Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria 2013 CENELEC 02520 EN 62516-3 Terrestrial digital multimedia broadcasting (T-DMB) receivers - Part 3: Common API 2013 CENELEC 02521 EN 61513 Nuclear power plants - Instrumentation and control important to safety - General requirements for systems 2013 CENELEC 0
2522 EN 62595-1-1 LCD backlight unit - Part 1-1: Generic specification 2013 CENELEC 02523 EN 60512-28-
100Connectors for electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 1 000 MHz onIEC 60603-7 and IEC 61076-3 series connectors - Tests 28a to 28g
2013 CENELEC 0
2524 EN 60584-1 Thermocouples - Part 1: EMF specifications and tolerances 2013 CENELEC 02525 EN 60335-2-17 Household and similar electrical appliances - Safety - Part 2-17: Particular requirements for blankets, pads, clothing and
similar flexible heating appliances2013 CENELEC 0
2526 EN 61996-1 Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - Part 1:Performance requirements, methods of testing and required test results
2013 CENELEC 0
2527 EN 61499-1 Function blocks - Part 1: Architecture 2013 CENELEC 02528 EN 61784-5-8 Industrial communication networks - Profiles - Part 5-8: Installation of fieldbuses - Installation profiles for CPF 8 2013 CENELEC 02529 EN 50136-2 Alarm systems - Alarm transmission systems and equipment - Part 2: Requirements for Supervised Premises Transceiver
(SPT)2013 CENELEC 0
2530 EN 50559 Electric room heating, underfloor heating, characteristics of performance - Definitions, method of testing, sizing andformula symbols
2013 CENELEC 0
2531 EN 50570 Household and similar electrical appliances - Safety - Particular requirements for commercial electric tumble dryers -Incorporates Amendment A1: 2018
2013 CENELEC 0
2532 EN 62625-1 Electronic railway equipment - On board driving data recording system - Part 1: System specification - IncorporatesAmendment A1: 2017
2013 CENELEC 0
2533 EN 60601-2-65 Medical electrical equipment - Part 2-65: Particular requirements for the basic safety and essential performance of dentalintra-oral X-ray equipment
2013 CENELEC 0
2534 EN 61131-3 Programmable controllers - Part 3: Programming languages 2013 CENELEC 02535 EN 62056-8-3 Electricity metering data exchange - The DLMS/COSEM suite - Part 8-3: Communication profile for PLC S-FSK
neighbourhood networks2013 CENELEC 0
2536 EN 62693 Industrial electroheating installations - Test methods for infrared electroheating installations 2013 CENELEC 02537 EN 62341-5-2 Organic light emitting diode (OLED) displays - Part 5-2: Mechanical endurance testing methods 2013 CENELEC 02538 EN 61189-11 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 11:
Measurement of melting temperature or melting temperature ranges of solder alloys2013 CENELEC 0
2539 EN 50174-3 Information technology - Cabling installation - Part 3: Installation planning and practices outside buildings - IncorporatesAmendment A1: 2017
2013 CENELEC 0
2540 EN 61672-1 Electroacoustics - Sound level meters - Part 1: Specifications 2013 CENELEC 02541 EN 60688 Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals 2013 CENELEC 02542 EN 62680-2 Universal serial bus interfaces for data and power - Part 2: Universal serial bus - Micro-USB cables and connectors
specification, revision 1.012013 CENELEC 0
2543 EN 61674 Medical electrical equipment - Dosimeters with ionization chambers and/or semiconductor detectors as used in X-raydiagnostic imaging
2013 CENELEC 0
2544 EN 60598-2-24 Luminaires - Part 2-24: Particular requirements - Luminaires with limited surface temperatures 2013 CENELEC 02545 EN 61753-143-
2Fibre optic interconnecting devices and passive components - Performance standard - Part 143-2: Optical passive VIPA-based dispersion compensator of single-mode fibre transmission for category C - Controlled environment
2013 CENELEC 0
2546 EN 62553 Methods of measurement for digital network - Performance characteristics of terrestrial digital multimedia transmissionnetwork
2013 CENELEC 0
2547 EN 61672-3 Electroacoustics - Sound level meters - Part 3: Periodic tests 2013 CENELEC 02548 EN 60952-3 Aircraft batteries - Part 3: Product specification and declaration of design and performance (DDP) 2013 CENELEC 02549 EN 61249-2-40 Materials for printed boards and other interconnecting structures - Part 2-40: Reinforced base materials clad and unclad -
High performance, non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test),copper-clad
2013 CENELEC 0
2550 EN 50288-6-2 Multi-element metallic cables used in analogue and digital communication and control - Part 6-2: Sectional specificationfor unscreened cables characterised up to 250 MHz - Work area and patch cord cables
2013 CENELEC 0
2551 EN 60034-28 Rotating electrical machines - Part 28: Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors
2013 CENELEC 0
2552 EN 60695-2-10 Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure 2013 CENELEC 02553 EN 61212-3-2 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes -
Part 3: Specifications for individual materials - Sheet 2: Round laminated moulded tubes2013 CENELEC 0
2554 EN 61772 Nuclear power plants - Control rooms - Application of visual display units (VDUs) 2013 CENELEC 02555 EN 50289-3-8 Communication cables - Specifications for test methods - Part 3-8: Mechanical test methods - Abrasion resistance of cable
sheath markings2013 CENELEC 0
2556 EN 60839-11-1 Alarm and electronic security systems - Part 11-1: Electronic access control systems - System and componentsrequirements
2013 CENELEC 0
2557 EN 60034-18-21
Rotating electrical machines - Part 18-21: Functional evaluation of insulation systems - Test procedures for wire-woundwindings - Thermal evaluation and classification
2013 CENELEC 0
2558 EN 50518-1 Monitoring and alarm receiving centre - Part 1: Location and construction requirements 2013 CENELEC 02559 EN 60191-6-22 Mechanical standardization of semiconductor devices - Part 6-22: General rules for the preparation of outline drawings of
surface mounted semiconductor device packages - Design guide for semiconductor packages Silicon Fine-pitch Ball GridArray and Silico
2013 CENELEC 0
2560 EN 61496-1 Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests 2013 CENELEC 02561 EN 61557-14 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring
or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment of machinery2013 CENELEC 0
2562 EN 61326-2-5 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements -Test configurations, operational conditions and performance criteria for devices with field bus interfaces according to IEC61784-1
2013 CENELEC 0
2563 EN 61300-3-49 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-49:Examinations and measurements - Guide pin retention force for rectangular ferrule multi-fibre connectors
2013 CENELEC 0
2564 EN 61784-5-6 Industrial communication networks - Profiles - Part 5-6: Installation of fieldbuses - Installation profiles for CPF 6 2013 CENELEC 02565 EN 62496-2-4 Optical circuit boards - Basic test and measurement procedures - Part 2-4: Optical transmission test for optical circuit
boards without input/output fibres2013 CENELEC 0
2566 EN 50551-2 Simplex and duplex cables to be used for cords - Part 2: Detailed specification and minimum requirements for a 3,0 mmsimplex ruggedised single mode fibre cable to be used for patchcords/cords category U
2013 CENELEC 0
2567 EN 61169-26 Radio-frequency connectors - Part 26: Sectional specification for TNCA series RF coaxial connectors 2013 CENELEC 02568 EN 50288-6-1 Multi-element metallic cables used in analogue and digital communication and control - Part 6-1: Sectional specification
for unscreened cables characterised up to 250 MHz - Horizontal and building backbone cables2013 CENELEC 0
2569 EN 61968-11 Application integration at electric utilities - System interfaces for distribution management - Part 11: Common informationmodel (CIM) extensions for distribution
2013 CENELEC 0
2570 EN 62056-7-6 Electricity metering data exchange - The DLMS/COSEM suite - Part 7-6: The 3-layer, connection-oriented HDLC basedcommunication profile
2013 CENELEC 0
2571 EN 50136-3 Alarm systems - Alarm transmission systems and equipment - Part 3: Requirements for Receiving Centre Transceiver(RCT)
2013 CENELEC 0
2572 EN 61169-43 Radio-frequency connectors - Part 43: Sectional specification for RBMA series blind mating RF coaxial connectors 2013 CENELEC 02573 EN 62037-2 Passive RF and microwave devices, intermodulation level measurement - Part 2: Measurement of passive intermodulation
in coaxial cable assemblies2013 CENELEC 0
2574 EN 61514-2 Industrial process control systems - Part 2: Methods of evaluating the performance of intelligent valve positioners withpneumatic outputs mounted on an actuator valve assembly
2013 CENELEC 0
2575 EN 61083-2 Instruments and software used for measurement in high-voltage and high-current tests - Part 2: Requirements for softwarefor tests with impulse voltages and currents
2013 CENELEC 0
2576 EN 61326-2-4 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements -Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC61557-8 and f
2013 CENELEC 0
2577 EN 61784-5-2 Industrial communication networks - Profiles - Part 5-2: Installation of fieldbuses - Installation profiles for CPF 2 2013 CENELEC 02578 EN 61747-2-1 Liquid crystal display devices - Part 2-1: Passive matrix monochrome LCD modules - Blank detail specification 2013 CENELEC 02579 EN 60544-1 Electrical insulating materials - Determination of the effects of ionizing radiation - Part 1: Radiation interaction and
dosimetry - Edition 1.02013 CENELEC 0
2580 EN 60335-2-27 Household and similar electrical appliances - Safety - Part 2-27: Particular requirements for appliances for skin exposure toultraviolet and infrared radiation
2013 CENELEC 0
2581 CLC/TS 50238-3
Railway applications - Compatibility between rolling stock and train detection systems - Part 3: Compatibility with axlecounters
2013 CENELEC 0
2582 EN 60794-2-31 Optical fibre cables - Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premisescabling
2013 CENELEC 0
2583 EN 50288-5-2 Multi-element metallic cables used in analogue and digital communication and control - Part 5-2: Sectional specificationfor screened cables characterized up to 250 MHz - Work area and patch cord cables
2013 CENELEC 0
2584 EN 61193-3 Quality assessment systems - Part 3: Selection and use of sampling plans for printed board and laminate end-product andin-process auditing
2013 CENELEC 0
2585 EN 61400-11 Wind turbines Part 11: Acoustic noise measurement techniques - Incorporates Amendment A1: 2018 2013 CENELEC 02586 EN 60695-11-
10Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods 2013 CENELEC 0
2587 EN 61850-7-410
Communication networks and systems for power utility automation - Part 7-410: Basic communication structure -Hydroelectric power plants - Communication for monitoring and control - Incorporates Amendment A1: 2016
2013 CENELEC 0
2588 EN 60598-2-8 Luminaires - Part 2-8: Particular requirements - Handlamps 2013 CENELEC 02589 EN 62382 Control systems in the process industry - Electrical and instrumentation loop check 2013 CENELEC 02590 EN 60349-4 Electric traction - Rotating electrical machines for rail and road vehicles - Part 4: Permanent magnet synchronous electrical
machines connected to an electronic converter2013 CENELEC 0
2591 EN 61689 Ultrasonics - Physiotherapy systems - Field specifications and methods of measurement in the frequency range 0,5 MHz to5 MHz
2013 CENELEC 0
2592 CLC/TS 50591 Specification and verification of energy consumption for railway rolling stock 2013 CENELEC 02593 EN 62026-2 Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i) 2013 CENELEC 02594 CLC/TR 50422 Guide for the application of the European Standard EN 50160 2013 CENELEC 02595 EN 61788-16 Superconductivity - Part 16: Electronic characteristic measurements - Power-dependent surface resistance of
superconductors at microwave frequencies2013 CENELEC 0
2596 EN 61300-2-28 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-28: Tests -Industrial atmosphere (sulphur dioxide)
2013 CENELEC 0
2597 EN 50377-17-1 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -Part 17-1: Type FPFT (factory polished field terminated) simplex connector factory terminated with EN 60793-2-50category B1.3 fibre an
2013 CENELEC 0
2598 EN 61557-10 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuringor monitoring of protective measures - Part 10: Combined measuring equipment for testing, measuring or monitoring ofprotective me
2013 CENELEC 0
2599 EN 60745-2-23 Hand-held motor-operated electric tools - Safety - Part 2-23: Particular requirements for die grinders and small rotary tools 2013 CENELEC 02600 EN 60794-3-12 Optical fibre cables - Part 3-12: Outdoor cables - Detailed specification for duct and directly buried optical
telecommunication cables for use in premises cabling2013 CENELEC 0
2601 EN 61784-5-18 Industrial communication networks - Profiles - Part 5-18: Installation of fieldbuses - Installation profiles for CPF 18 2013 CENELEC 02602 EN 62040-4 Uninterruptible power systems (UPS) - Part 4: Environmental aspects - Requirements and reporting 2013 CENELEC 02603 EN 61784-5-3 Industrial communication networks - Profiles - Part 5-3: Installation of fieldbuses - Installation profiles for CPF 3 2013 CENELEC 0
2604 EN 60432-3 Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle) 2013 CENELEC 02605 EN 62395-1 Electrical resistance trace heating systems for industrial and commercial applications - Part 1: General and testing
requirements2013 CENELEC 0
2606 EN 61754-4 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 4: Type SC connectorfamily
2013 CENELEC 0
2607 EN 61558-2-14 Safety of transformers, reactors, power supply units and combination thereof - Part 2-14: Particular requirements and testsfor variable transformers and power supply units incorporating variable transformers
2013 CENELEC 0
2608 EN 61131-9 Programmable controllers - Part 9: Single-drop digital communication interface for small sensors and actuators (SDCI) 2013 CENELEC 02609 EN 62716 Photovoltaic (PV) modules - Ammonia corrosion testing 2013 CENELEC 02610 EN 60143-2 Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks 2013 CENELEC 02611 EN 61784-5-19 Industrial communication networks - Profiles - Part 5-19: Installation of fieldbuses - Installation profiles for CPF 19 2013 CENELEC 02612 EN 60952-1 Aircraft batteries - Part 1: General test requirements and performance levels 2013 CENELEC 02613 EN 61326-2-3 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements -
Test configuration, operational conditions and performance criteria for transducers with integrated or remote signalconditioning
2013 CENELEC 0
2614 EN 62264-2 Enterprise-control system integration - Part 2: Objects and attributes for enterprise-control system integration 2013 CENELEC 02615 EN 50332-2 Sound system equipment: Headphones and earphones associated with personal music players - Maximum sound pressure
level measurement methodology - Part 2: Matching of sets with headphones if either or both are offered separately, or areoffered as one packa
2013 CENELEC 0
2616 EN 60255-149 Measuring relays and protection equipment - Part 149: Functional requirements for thermal electrical relays 2013 CENELEC 02617 EN 60068-2-55 Environmental testing - Part 2-55: Tests - Test Ee and guidance - Loose cargo testing including bounce 2013 CENELEC 02618 EN 50288-5-1 Multi-element metallic cables used in analogue and digital communication and control - Part 5-1: Sectional specification
for screened cables characterized up to 250 MHz - Horizontal and building backbone cables2013 CENELEC 0
2619 EN 61169-42 Radio-frequency connectors - Part 42: Sectional specification for CQN series quick lock RF coaxial connectors 2013 CENELEC 02620 EN 60286-3 Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes -
Incorporating corrigendum October 20132013 CENELEC 0
2621 EN 61499-4 Function blocks - Part 4: Rules for compliance profiles 2013 CENELEC 02622 EN 55013 Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and
methods of measurement - Incorporates Amendment A1: 20162013 CENELEC 0
2623 EN 50438 Requirements for micro-generating plants to be connected in parallel with public low-voltage distribution networks 2013 CENELEC 02624 EN 61300-2-11 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-11: Tests -
Axial compression2013 CENELEC 0
2625 EN 62282-6-300
Fuel cell technologies - Part 6-300: Micro fuel cell power systems - Fuel cartridge interchangeability 2013 CENELEC 0
2626 EN 60455-3-8 Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8:Resins for cable accessories
2013 CENELEC 0
2627 EN 60068-2-57 Environmental testing - Part 2-57: Tests - Test Ff: Vibration - Time-history and sine-beat method 2013 CENELEC 02628 EN 61161 Ultrasonics - Power measurement - Radiation force balances and performance requirements 2013 CENELEC 02629 EN 61439-4 Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites
(ACS)2013 CENELEC 0
2630 EN 61526 Radiation protection instrumentation - Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma,neutron and beta radiations - Direct reading personal dose equivalent meters
2013 CENELEC 0
2631 EN 61400-4 Wind turbines - Part 4: Design requirements for wind turbine gearboxes 2013 CENELEC 02632 EN 62325-450 Framework for energy market communications - Part 450: Profile and context modelling rules 2013 CENELEC 02633 EN 60869-1 Fibre optic interconnecting devices and passive components - Fibre optic passive power control devices - Part 1: Generic
specification2013 CENELEC 0
2634 EN 60747-16-5 Semiconductor devices - Part 16-5: Microwave integrated circuits - Oscillators 2013 CENELEC 02635 EN 60404-11 Magnetic materials - Part 11: Method of test for the determination of surface insulation resistance of magnetic sheet and
strip2013 CENELEC 0
2636 EN 61753-022-2
Fibre optic interconnecting devices and passive components - Performance standard - Part 022-2: Fibre optic connectorsterminated on multimode fibre for category C - Controlled environment
2013 CENELEC 0
2637 EN 60952-2 Aircraft batteries - Part 2: Design and construction requirements 2013 CENELEC 02638 EN 61788-17 Superconductivity - Part 17: Electronic characteristic measurements - Local critical current density and its distribution in
large-area superconducting films2013 CENELEC 0
2639 EN 61300-3-4 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4:Examinations and measurements - Attenuation
2013 CENELEC 0
2640 EN 60793-1-42 Optical fibres - Part 1-42: Measurement methods and test procedures - Chromatic dispersion 2013 CENELEC 02641 EN 62361-2 Power systems management and associated information exchange - Interoperability in the long term - Part 2: End to end
quality codes for supervisory control and data acquisition (SCADA)2013 CENELEC 0
2642 EN 61754-27 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 27: Type M12-FOconnector family
2013 CENELEC 0
2643 EN 61753-091-2
Fibre optic interconnecting devices and passive components - Performance standard - Part 091-2: Non-connectorizedsingle-mode fibre optic pigtailed circulators for category C - Controlled environment
2013 CENELEC 0
2644 EN 61968-1 Application integration at electric utilities - System interfaces for distribution management - Part 1: Interface architectureand general recommendations
2013 CENELEC 0
2645 EN 50379-2 Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances -Part 2: Performance requirements for apparatus used in statutory inspections and assessment
2012 CENELEC 0
2646 EN 61148 Terminal markings for valve device stacks and assemblies and for power conversion equipment 2012 CENELEC 02647 EN 60811-602 Electric and optical fibre cables - Test methods for non-metallic materials - Part 602: Physical tests - Separation of oil in
filling compounds2012 CENELEC 0
2648 EN 60794-2-21 Optical fibre cables - Part 2-21: Indoor optical fibre cables - Detailed specification for multi-fibre optical distribution cablesfor use in premises cabling
2012 CENELEC 0
2649 EN 62047-14 Semiconductor devices - Micro-electromechanical devices - Part 14: Forming limit measuring method of metallic filmmaterials
2012 CENELEC 0
2650 EN 60874-1 Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Genericspecification
2012 CENELEC 0
2651 EN 60598-2-2 Luminaires - Part 2-2: Particular requirements - Recessed luminaires - Incorporating Corrigendum 2012 2012 CENELEC 02652 EN 62639 Fluorescent induction lamps - Performance specification 2012 CENELEC 02653 EN 62341-6-2 Organic light emitting diode (OLED) displays - Part 6-2: Measuring methods of visual quality and ambient performance 2012 CENELEC 02654 EN 62271-203 High-voltage switchgear and controlgear - Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52
kV2012 CENELEC 0
2655 EN 60512-24-1 Connectors for electronic equipment - Tests and measurements - Part 24-1: Magnetic interference tests - Test 24a: Residualmagnetism
2012 CENELEC 0
2656 EN 50134-3 Alarm systems - Social alarm systems - Part 3: Local unit and controller - Incorporating corrigendum July 2015 2012 CENELEC 02657 EN 61362 Guide to specification of hydraulic turbine governing systems 2012 CENELEC 02658 EN 60811-507 Electric and optical fibre cables - Test methods for non-metallic materials - Part 507: Mechanical tests - Hot set test for
cross-linked materials2012 CENELEC 0
2659 EN 50411-2-2 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-2: Sealedpan fibre splice closures Type 1, for category S & A
2012 CENELEC 0
2660 EN 61869-2 Instrument transformers - Part 2: Additional requirements for current transformers 2012 CENELEC 02661 EN 60811-506 Electric and optical fibre cables - Test methods for non-metallic materials - Part 506: Mechanical tests - Impact test at low
temperature for insulations and sheaths2012 CENELEC 0
2662 EN 61009-1 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) -Part 1: General rules - Incorporates Amendment A12: 2016
2012 CENELEC 0
2663 EN 62023 Structuring of technical information and documentation - Incorporating corrigendum February 2012 2012 CENELEC 02664 EN 60734 Household electrical appliances - Performance - Water for testing 2012 CENELEC 02665 EN 60317-0-8 Specifications for particular types of winding wires - Part 0-8: General requirements - Polyester glass fibre wound, resin or
varnish impregnated or not impregnated, bare or enamelled rectangular copper wire2012 CENELEC 0
2666 EN 61784-5-15 Industrial communication networks - Profiles - Part 5-15: Installation of fieldbuses - Installation profiles for CPF 15 -Incorporates Amendment A1: 2015
2012 CENELEC 0
2667 EN 61375-3-2 Electronic railway equipment - Train communication network (TCN) - Part 3-2: MVB (Multifunction Vehicle Bus)conformance testing
2012 CENELEC 0
2668 EN 60626-1 Combined flexible materials for electrical insulation - Part 1: Definitions and general requirements 2012 CENELEC 02669 EN 60335-2-68 Household and similar electrical appliances - Safety - Part 2-68: Particular requirements for spray extraction machines, for
commercial use2012 CENELEC 0
2670 EN 62423 Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for householdand similar uses
2012 CENELEC 0
2671 EN 60704-2-6 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-6:Particular requirements for tumble dryers
2012 CENELEC 0
2672 EN 60297-3-107
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part3-107: Dimensions of subracks and plug-in units, small form factor
2012 CENELEC 0
2673 EN 61439-3 Low-voltage switchgear and controlgear assemblies - Part 3: Distribution boards intended to be operated by ordinarypersons (DBO) - Incorporating corrigendum September 2013
2012 CENELEC 0
2674 EN 60704-2-4 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-4:Particular requirements for washing machines and spin extractors
2012 CENELEC 0
2675 EN 60811-410 Electric and optical fibre cables - Test methods for nonmetallic materials - Part 410: Miscellaneous tests - Test method forcopper-catalyzed oxidative degradation of polyolefin insulated conductors - Incorporates Amendment A1: 2017
2012 CENELEC 0
2676 EN 61056-2 General purpose lead-acid batteries (valve-regulated types) - Part 2: Dimensions, terminals and marking 2012 CENELEC 02677 EN 61837-1 Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead
connections - Part 1: Plastic moulded enclosure outlines2012 CENELEC 0
2678 EN 50131-2-7-2 Alarm systems - Intrusion and hold-up systems - Part 2-7-2: Intrusion detectors - Glass break detectors (passive) -Incorporates Amendment A2: 2016
2012 CENELEC 0
2679 EN 62585 Electroacoustics - Methods to determine corrections to obtain the free-field response of a sound level meter 2012 CENELEC 02680 EN 61754-28 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 28: Type LF3
connector family2012 CENELEC 0
2681 EN 61747-30-1 Liquid crystal display devices - Part 30-1: Measuring methods for liquid crystal display modules - Transmissive type 2012 CENELEC 02682 EN 60079-11 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" 2012 CENELEC 02683 EN 62037-1 Passive RF and microwave devices, intermodulation level measurement - Part 1: General requirements and measuring
methods2012 CENELEC 0
2684 EN 50152-1 Railway applications - Fixed installations - Particular requirements for alternating current switchgear - Part 1: Circuit-breakers with nominal voltage above 1 kV - Incorporates Amendment A1: 2013
2012 CENELEC 0
2685 EN 60811-402 Electric and optical fibre cables - Test methods for non-metallic materials - Part 402: Miscellaneous tests - Waterabsorption tests
2012 CENELEC 0
2686 EN 60335-2-69 Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners,including power brush for commercial use
2012 CENELEC 0
2687 EN 61076-2-101
Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification forM12 connectors with screw-locking
2012 CENELEC 0
2688 EN 60811-601 Electric and optical fibre cables - Test methods for non-metallic materials - Part 601: Physical tests - Measurement of thedrop point of filling compounds
2012 CENELEC 0
2689 EN 61347-2-2 Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic stepdown convertors for filamentlamps
2012 CENELEC 0
2690 EN 60317-2 Specifications for particular types of winding wires - Part 2: Solderable polyurethane enamelled round copper wire, class130, with a bonding layer
2012 CENELEC 0
2691 EN 62697-1 Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids - Part 1:Test method for quantitative determination of dibenzyldisulfide (DBDS)
2012 CENELEC 0
2692 EN 60811-405 Electric and optical fibre cables - Test methods for non-metallic materials - Part 405: Miscellaneous tests - Thermalstability test for PVC insulations and PVC sheaths
2012 CENELEC 0
2693 EN 60512-7-2 Connectors for electronic equipment - Tests and measurements Part 7-2: Impact tests (free connectors) - Test 7b:Mechanical strength impact
2012 CENELEC 0
2694 EN 60384-22 Fixed capacitors for use in electronic equipment - Part 22: Sectional specification - Fixed surface mount multilayercapacitors of ceramic dielectric, Class 2
2012 CENELEC 0
2695 EN 60034-18-31
Rotating electrical machines - Part 18-31: Functional evaluation of insulation systems - Test procedures for form-woundwindings - Thermal evaluation and classification of insulation systems used in rotating machines
2012 CENELEC 0
2696 EN 61754-20 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 20: Type LC connectorfamily
2012 CENELEC 0
2697 EN 61881-2 Railway applications - Rolling stock equipment - Capacitors for power electronics - Part 2: Aluminium electrolyticcapacitors with non solid electrolyte
2012 CENELEC 0
2698 EN 60811-202 Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement ofthickness of non-metallic sheath - Incorporates Amendment A1: 2018
2012 CENELEC 0
2699 EN 60811-409 Electric and optical fibre cables - Test methods for non-metallic materials - Part 409: Miscellaneous tests - Loss of masstest for thermoplastic insulations and sheaths
2012 CENELEC 0
2700 EN 50553 Railway applications - Requirements for running capability in case of fire on board of rolling stock - IncorporatesAmendment A1: 2016
2012 CENELEC 0
2701 EN 62551 Analysis techniques for dependability - Petri net techniques 2012 CENELEC 02702 EN 60874-1-1 Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1-1: Blank
detail specification2012 CENELEC 0
2703 EN 61056-1 General purpose lead-acid batteries (valve-regulated types) - Part 1: General requirements, functional characteristics -Methods of test
2012 CENELEC 0
2704 EN 60731 Medical electrical equipment - Dosimeters with ionization chambers as used in radiotherapy 2012 CENELEC 02705 EN 50441-1 Cables for indoor residential telecommunication installations - Part 1: Unscreened cables - Grade 1 2012 CENELEC 02706 EN 62337 Commissioning of electrical, instrumentation and control systems in the process industry - Specific phases and milestones 2012 CENELEC 02707 EN 61158-5-21 Industrial communication networks - Fieldbus specifications - Part 5-21: Application layer service definition - Type 21
elements2012 CENELEC 0
2708 EN 61010-2-032
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-032: Particularrequirements for hand-held and hand-manipulated current sensors for electrical test and measurement
2012 CENELEC 0
2709 EN 61158-5-15 Industrial communication networks - Fieldbus specifications - Part 5-15: Application layer service definition - Type 15elements
2012 CENELEC 0
2710 EN 50580 Safety of hand-held electric motor operated tools - Particular requirements for spray guns - Incorporates Amendment A1:2013
2012 CENELEC 0
2711 EN 50379-3 Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances -Part 3: Performance requirements for apparatus used in non-statutory servicing of gas fired heating appliances
2012 CENELEC 0
2712 EN 61988-2-5 Plasma display panels - Part 2-5: Measuring methods - Acoustic noise 2012 CENELEC 02713 EN 61291-4 Optical amplifiers - Part 4: Multichannel applications - Performance specification template 2012 CENELEC 02714 EN 62037-3 Passive RF and microwave devices, intermodulation level measurement - Part 3: Measurement of passive intermodulation
in coaxial connectors2012 CENELEC 0
2715 EN 60352-5 Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance 2012 CENELEC 0
2716 EN 60695-4 Fire hazard testing - Part 4: Terminology concerning fire tests for electrotechnical products 2012 CENELEC 02717 EN 61558-2-15 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-15: Particular requirements and tests
for isolating transformers for the supply of medical locations2012 CENELEC 0
2718 EN 62027 Preparation of object lists, including parts lists 2012 CENELEC 02719 EN 61010-2-
091Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-091: Particularrequirements for cabinet x-ray systems - Incorporating corrigendum January 2013
2012 CENELEC 0
2720 EN 60947-4-2 Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllersand starters
2012 CENELEC 0
2721 EN 61300-2-33 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-33: Tests -Assembly and disassembly of fibre optic mechanical splices, fibre management systems and closures
2012 CENELEC 0
2722 EN 60669-2-6 Switches for household and similar fixed electrical installations - Part 2-6: Particular requirements - Firemans switches forexterior and interior signs and luminaires
2012 CENELEC 0
2723 EN 61915-2 Low-voltage switchgear and controlgear - Device profiles for networked industrial devices - Part 2: Root device profiles forstarters and similar equipment
2012 CENELEC 0
2724 EN 60440 Method of measurement of non-linearity in resistors 2012 CENELEC 02725 EN 61754-20-
100Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 20-100: Interfacestandard for LC connectors with protective housings related to IEC 61076-3-106
2012 CENELEC 0
2726 EN 62560 Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications - IncorporatesAmendment A1: 2015
2012 CENELEC 0
2727 EN 50288-8 Multi-element metallic cables used in analogue and digital communication and control - Part 8: Specification for type 1cables characterised up to 2 MHz
2012 CENELEC 0
2728 EN 60384-2 Fixed capacitors for use in electronic equipment - Part 2: Sectional specification - Fixed metallized polyethyleneterephthalate film dielectric d.c. capacitors
2012 CENELEC 0
2729 EN 50411-2-3 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-3: Sealedinline fibre splice closures Type 1, for category S & A
2012 CENELEC 0
2730 CLC/TR 50501-2
Railway applications - Rolling stock - Intercommunication between vehicles and train/wayside - Part 2: Technical contentsof standardization work in the field of intercommunication
2012 CENELEC 0
2731 EN 60335-2-72 Household and similar electrical appliances - Safety - Part 2-72: Particular requirements for floor treatment machines withor without traction drive, for commercial use
2012 CENELEC 0
2732 EN 61000-4-4 Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burstimmunity test
2012 CENELEC 0
2733 EN 60079-35-2 Explosive atmospheres - Part 35-2: Caplights for use in mines susceptible to firedamp - Performance and other safety-related matters
2012 CENELEC 0
2734 EN 60034-18-34
Rotating electrical machines - Part 18-34: Functional evaluation of insulation systems - Test procedures for form-woundwindings - Evaluation of thermomechanical endurance of insulation systems
2012 CENELEC 0
2735 EN 61158-6-18 Industrial communication networks - Fieldbus specifications - Part 6-18: Application layer protocol specification - Type 18elements
2012 CENELEC 0
2736 EN 60317-62 Specifications for particular types of winding wires - Part 62: Polyester glass fibre wound, minimum class 200 resin orvarnish impregnated, bare or enamelled rectangular copper wire, temperature index 200
2012 CENELEC 0
2737 EN 61347-2-7 Lamp controlgear - Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting(self-contained)
2012 CENELEC 0
2738 EN 62271-200 High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltagesabove 1 kV and up to and including 52 kV
2012 CENELEC 0
2739 EN 62439-7 Industrial communication networks - High availability automation networks - Part 7: Ring-based Redundancy Protocol(RRP)
2012 CENELEC 0
2740 EN 62037-4 Passive RF and microwave devices, intermodulation level measurement - Part 4: Measurement of passive intermodulationin coaxial cables
2012 CENELEC 0
2741 EN 61158-5-18 Industrial communication networks - Fieldbus specifications - Part 5-18: Application layer service definition - Type 18elements
2012 CENELEC 0
2742 EN 60811-502 Electric and optical fibre cables - Test methods for non-metallic materials - Part 502: Mechanical tests - Shrinkage test forinsulations
2012 CENELEC 0
2743 EN 60118-15 Electroacoustics - Hearing aids - Part 15: Methods for characterising signal processing in hearing aids with a speech-likesignal
2012 CENELEC 0
2744 EN 50411-2-4 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-4: Sealeddome fibre splice closures Type 1, for category S & A
2012 CENELEC 0
2745 EN 50574 Collection, logistics & treatment requirements for end-of-life household appliances containing volatile fluorocarbonsor volatile hydrocarbons
2012 CENELEC 0
2746 EN 60811-603 Electric and optical fibre cables - Test methods for non-metallic materials - Part 603: Physical tests - Measurement of totalacid number of filling compounds
2012 CENELEC 0
2747 EN 50288-10-1 Multi-element metallic cables used in analogue and digital communication and control - Part 10-1: Sectional specificationfor screened cables characterized up to 500 MHz - Horizontal floor and building backbone cables
2012 CENELEC 0
2748 EN 60512-27-100
Connectors for electronic equipment - Tests and measurements - Part 27-100: Signal integrity tests up to 500 MHz on IEC60603-7 series connectors - Tests 27a to 27g
2012 CENELEC 0
2749 EN 60747-15 Semiconductor devices - Discrete devices - Part 15: Isolated power semiconductor devices 2012 CENELEC 02750 EN 60683 Industrial electroheating equipment - Test methods for submerged-arc furnaces 2012 CENELEC 02751 EN 60317-49 Specifications for particular types of winding wires - Part 49: Glass-fibre wound high temperature resin or varnish
impregnated, bare or enamelled round copper wire, temperature index 1802012 CENELEC 0
2752 EN 61982 Secondary batteries (except lithium) for the propulsion of electric road vehicles - Performance and endurance tests 2012 CENELEC 02753 EN 61375-1 Electronic railway equipment - Train communication network (TCN) - Part 1: General architecture 2012 CENELEC 02754 CLC/TR 50579 Electricity metering equipment (a.c.) - Severity levels, immunity requirements and test methods for conducted disturbances
in the frequency range 2 kHz - 150 kHz2012 CENELEC 0
2755 EN 60512-16-21
Connectors for electronic equipment - Tests and measurements - Part 16-21: Mechanical tests on contacts and terminations- Test 16u: Whisker test via the application of external mechanical stresses
2012 CENELEC 0
2756 EN 50152-2 Railway applications - Fixed installations - Particular requirements for alternating current switchgear - Part 2:Disconnectors, earthing switches and switches with nominal voltage above 1 kV
2012 CENELEC 0
2757 EN 61094-8 Electroacoustics - Measurement microphones - Part 8: Methods for determining the free-field sensitivity of workingstandard microphones by comparison - Incorporating corrigendum January 2013
2012 CENELEC 0
2758 EN 60296 Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear 2012 CENELEC 02759 EN 50317 Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic
interaction between pantograph and overhead contact line2012 CENELEC 0
2760 EN 61784-5-12 Industrial communication networks - Profiles - Part 5-12: Installation of fieldbuses - Installation profiles for CPF 12 -Incorporates Amendment A1: 2015
2012 CENELEC 0
2761 EN 61131-6 Programmable controllers - Part 6: Functional safety 2012 CENELEC 02762 EN 61076-4-
116Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specificationfor a high-speed two-part connector with integrated shielding function - Incorporates Amendment A1: 2016
2012 CENELEC 0
2763 EN 60294 Measurement of the dimensions of a cylindrical component with axial terminations 2012 CENELEC 02764 EN 50293 Road traffic signal systems - Electromagnetic compatibility 2012 CENELEC 02765 EN 62474 Material declaration for products of and for the electrotechnical industry 2012 CENELEC 02766 EN 62477-1 Safety requirements for power electronic converter systems and equipment - Part 1: General - Incorporates Amendment
A1: 20172012 CENELEC 0
2767 EN 60662 High-pressure sodium vapour lamps - Performance specifications 2012 CENELEC 02768 EN 61029-2-1 Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements for circular saw benches - Remains
Current2012 CENELEC 0
2769 EN 60076-18 Power transformers - Part 18: Measurement of frequency response 2012 CENELEC 02770 EN 60384-13 Fixed capacitors for use in electronic equipment - Part 13: Sectional specification - Fixed polypropylene film dielectric
metal foil d.c. capacitors2012 CENELEC 0
2771 EN 60728-3-1 Cable networks for television signals, sound signals and interactive services - Part 3-1: Methods of measurement of non-linearity for full digital channel load with DVB-C signals
2012 CENELEC 0
2772 EN 61784-5-4 Industrial communication networks - Profiles - Part 5-4: Installation of fieldbuses - Installation profiles for CPF 4 -Incorporates Amendment A1: 2015
2012 CENELEC 0
2773 EN 60811-203 Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement ofoverall dimensions
2012 CENELEC 0
2774 EN 61158-6-21 Industrial communication networks - Fieldbus specifications - Part 6-21: Application layer protocol specification - Type 21elements
2012 CENELEC 0
2775 EN 60794-4-20 Optical fibre cables - Part 4-20: Aerial optical cables along electrical power lines - Family specification for ADSS (AllDielectric Self Supported) optical cables
2012 CENELEC 0
2776 EN 62137-3 Electronics assembly technology - Part 3: Selection guidance of environmental and endurance test methods for solder joints 2012 CENELEC 02777 EN 60358-1 Coupling capacitors and capacitor dividers - Part 1: General rules 2012 CENELEC 02778 CLC/TR 50173-
99-3Information technology - Generic cabling systems - Part 99-3: Home cabling infrastructures up to 50 m in length to supportsimultaneous and non simultaneous provision of applications
2012 CENELEC 0
2779 EN 60819-1 Non-cellulosic papers for electrical purposes - Part 1: Definitions and general requirements 2012 CENELEC 02780 EN 61217 Radiotherapy equipment - Coordinates, movements and scales 2012 CENELEC 02781 EN 60811-503 Electric and optical fibre cables - Test methods for non-metallic materials - Part 503: Mechanical tests - Shrinkage test for
sheaths2012 CENELEC 0
2782 EN 61158-6-15 Industrial communication networks - Fieldbus specifications - Part 6-15: Application layer protocol specification - Type 15elements
2012 CENELEC 0
2783 EN 60512-1-100
Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications 2012 CENELEC 0
2784 EN 60811-604 Electric and optical fibre cables - Test methods for non-metallic materials - Part 604: Physical tests - Measurement ofabsence of corrosive components in filling compounds
2012 CENELEC 0
2785 EN 50288-11-1 Multi-element metallic cables used in analogue and digital communication and control - Part 11-1: Sectional specificationfor un-screened cables characterised up to 500 MHz - Horizontal and building backbone cables
2012 CENELEC 0
2786 EN 61274-1-1 Fibre optic interconnecting devices and passive components - Adaptors for fibre optic connectors - Part 1-1: Blank detailspecification
2012 CENELEC 0
2787 EN 60862-2 Surface acoustic wave (SAW) filters of assessed quality - Part 2: Guidelines for the use 2012 CENELEC 02788 EN 61010-2-
033Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-033: Particularrequirements for hand-held multimeters and other meters, for domestic and professional use, capable of measuring mainsvoltage
2012 CENELEC 0
2789 EN 62047-13 Semiconductor devices - Micro-electromechanical devices - Part 13: Bend- and shear - type test methods of measuringadhesive strength for MEMS structures
2012 CENELEC 0
2790 EN 62149-7 Fibre optic active components and devices - Performance standards - Part 7: 1 310 nm discrete vertical cavity surfaceemitting laser devices
2012 CENELEC 0
2791 EN 61300-3-38 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-38:Examinations and measurements - Group delay, chromatic dispersion and phase ripple
2012 CENELEC 0
2792 EN 50388 Railway Applications - Power supply and rolling stock - Technical criteria for the coordination between power supply(substation) and rolling stock to achieve interoperability - Incorporating corrigenda August 2012, April 2013 and August2013
2012 CENELEC 0
2793 EN 60301 Preferred diameters of wire terminations of capacitors and resistors 2012 CENELEC 02794 EN 60317-50 Specifications for particular types of winding wires - Part 50: Glass-fibre wound silicone resin or varnish impregnated, bare
or enamelled round copper wire, temperature index 2002012 CENELEC 0
2795 EN 60811-512 Electric and optical fibre cables - Test methods for non-metallic materials - Part 512: Mechanical tests - Methods specific topolyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevatedtemperature
2012 CENELEC 0
2796 EN 62271-107 High-voltage switchgear and controlgear - Part 107: Alternating current fused circuit-switchers for rated voltages above 1kV up to and including 52 kV
2012 CENELEC 0
2797 EN 50600-1 Information technology - Data centre facilities and infrastructures - Part 1: General concepts 2012 CENELEC 02798 EN 61008-1 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) -
Part 1: General rules - Incorporates Amendment A12: 20172012 CENELEC 0
2799 EN 62271-105 High-voltage switchgear and controlgear - Part 105: Alternating current switch-fuse combinations for rated voltages above1 kV up to and including 52 kV
2012 CENELEC 0
2800 EN 60544-2 Electrical insulating materials - Determination of the effects of ionizing radiation on insulating materials - Part 2:Procedures for irradiation and test
2012 CENELEC 0
2801 EN 61988-2-1 Plasma display panels - Part 2-1: Measuring methods - Optical and optoelectrical 2012 CENELEC 02802 EN 60851-6 Winding wires - Test methods - Part 6: Thermal properties 2012 CENELEC 02803 EN 60317-61 Specifications for particular types of winding wires - Part 61: Polyester glass fibre wound, minimum class 180, resin or
varnish impregnated, bare or enamelled rectangular copper wire, temperature index 1802012 CENELEC 0
2804 EN 60811-403 Electric and optical fibre cables - Test methods for non-metallic materials - Part 403: Miscellaneous tests - Ozone resistancetest on cross-linked compounds
2012 CENELEC 0
2805 EN 60811-401 Electric and optical fibre cables Test methods for non-metallic materials Part 401: Miscellaneous tests Thermal ageingmethods Ageing in an air oven - Incorporates Amendment A1: 2017
2012 CENELEC 0
2806 EN 60811-605 Electric and optical fibre cables - Test methods for non-metallic materials - Part 605 : Physical tests - Measurement ofcarbon black and/or mineral filler in polyethylene compounds
2012 CENELEC 0
2807 EN 61158-4-21 Industrial communication networks - Fieldbus specifications - Part 4-21: Data-link layer protocol specification - Type 21elements
2012 CENELEC 0
2808 EN 60811-504 Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Bending tests atlow temperature for insulation and sheaths
2012 CENELEC 0
2809 EN 60335-2-25 Household and similar electrical appliances - Safety - Part 2-25: Particular requirements for microwave ovens, includingcombination microwave ovens - Incorporates Amendment A2: 2016
2012 CENELEC 0
2810 EN 61701 Salt mist corrosion testing of photovoltaic (PV) modules 2012 CENELEC 02811 EN 62358 Ferrite cores - Standard inductance factor for gapped cores and its tolerance 2012 CENELEC 02812 EN 60115-8 Fixed resistors for use in electronic equipment - Part 8: Sectional specification - Fixed surface mount resistors 2012 CENELEC 02813 EN 61753-087-
6Fibre optic interconnecting devices and passive components - Performance standard - Part 087-6: Non-connectorisedsingle-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category O - Uncontrolledenvironment
2012 CENELEC 0
2814 EN 62282-3-300
Fuel cell technologies - Part 3-300: Stationary fuel cell power systems - Installation 2012 CENELEC 0
2815 EN 60811-406 Electric and optical fibre cables - Test methods for non-metallic materials - Part 406: Miscellaneous tests - Resistance tostress cracking of polyethylene and polypropylene compounds
2012 CENELEC 0
2816 EN 60865-1 Short-circuit currents - Calculation of effects - Part 1: Definitions and calculation methods 2012 CENELEC 02817 EN 50288-9-1 Multi-element metallic cables used in analogue and digital communication and control - Part 9-1: Sectional specification
for screened cables characterised up to 1 000 MHz - Horizontal and building backbone cables2012 CENELEC 0
2818 EN 61314-1-1 Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part 1-1: Blank detail specification 2012 CENELEC 02819 EN 60317-48 Specifications for particular types of winding wires - Part 48: Glass-fibre wound resin or varnish impregnated, bare or
enamelled round copper wire, temperature index 1552012 CENELEC 0
2820 EN 60811-100 Electric and optical fibre cables - Test methods for non-metallic materials - Part 100: General 2012 CENELEC 02821 EN 60384-21 Fixed capacitors for use in electronic equipment - Part 21: Sectional specification - Fixed surface mount multilayer
capacitors of ceramic dielectric, Class 12012 CENELEC 0
2822 EN 61375-2-1 Electronic railway equipment - Train communication network (TCN) - Part 2-1: Wire Train Bus (WTB) 2012 CENELEC 02823 EN 60676 Industrial electroheating equipment - Test methods for direct arc furnaces 2012 CENELEC 02824 EN 62341-6-3 Organic light emitting diode (OLED) displays - Part 6-3: Measuring methods of image quality 2012 CENELEC 02825 EN 61274-1 Fibre optic interconnecting devices and passive components - Adaptors for fibre optic connectors - Part 1: Generic
specification2012 CENELEC 0
2826 EN 62034 Automatic test systems for battery powered emergency escape lighting 2012 CENELEC 02827 EN 60917-2-5 Modular order for the development of mechanical structures for electronic equipment practices - Part 2-5: Sectional
specification - Interface co-ordination dimensions for the 25 mm equipment practice - Cabinet interface dimensions formiscellaneous equipm
2012 CENELEC 0
2828 EN 60794-2-11 Optical fibre cables - Part 2-11: Indoor optical fibre cables - Detailed specification for simplex and duplex cables for use inpremises cabling
2012 CENELEC 0
2829 EN 61747-4 Liquid crystal display devices - Part 4: Liquid crystal display modules and cells - Essential ratings and characteristics 2012 CENELEC 02830 EN 60811-302 Electric and optical fibre cables - Test methods for non-metallic materials - Part 302: Electrical tests - Measurement of the
d.c. resistivity at 23 آ°C and 100 آ°C of filling compounds2012 CENELEC 0
2831 EN 60811-411 Electric and optical fibre cables - Test methods for non-metallic materials - Part 411: Miscellaneous tests - Low-temperature brittleness of filling compounds
2012 CENELEC 0
2832 EN 62381 Automation systems in the process industry - Factory acceptance test (FAT), site acceptance test (SAT) and site integrationtest (SIT)
2012 CENELEC 0
2833 CLC/TS 62441 Safeguards against accidentally caused candle flame ignition for audio/video, communication and information technologyequipment
2012 CENELEC 0
2834 EN 61375-3-3 Electronic railway equipment - Train communication network (TCN) - Part 3-3: CANopen Consist Network (CCN) 2012 CENELEC 02835 EN 61439-6 Low-voltage switchgear and controlgear assemblies - Part 6: Busbar trunking systems (busways) 2012 CENELEC 02836 EN 61969-1 Mechanical structures for electronic equipment - Outdoor enclosures - Part 1: Design guidelines 2012 CENELEC 02837 EN 61124 Reliability testing - Compliance tests for constant failure rate and constant failure intensity 2012 CENELEC 02838 EN 61643-11 Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems -
Requirements and test methods - Incorporates Amendment A11: 20182012 CENELEC 0
2839 EN 60335-2-79 Household and similar electrical appliances - Safety - Part 2-79: Particular requirements for high pressure cleaners andsteam cleaners
2012 CENELEC 0
2840 EN 61280-2-2 Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform andextinction ratio measurement
2012 CENELEC 0
2841 EN 62271-207 High-voltage switchgear and controlgear - Part 207: Seismic qualification for gas-insulated switchgear assemblies for ratedvoltages above 52 kV
2012 CENELEC 0
2842 EN 60811-606 Electric and optical fibre cables - Test methods for non-metallic materials - Part 606: Physical tests - Methods fordetermining the density
2012 CENELEC 0
2843 EN 60811-505 Electric and optical fibre cables - Test methods for non-metallic materials - Part 505: Mechanical tests - Elongation at lowtemperature for insulations and sheaths
2012 CENELEC 0
2844 EN 61300-3-7 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7:Examinations and measurements - Wavelength dependence of attenuation and return loss of single mode components
2012 CENELEC 0
2845 EN 60811-201 Electric and optical fibre cables Test methods for non-metallic materials Part 201: General tests Measurement of insulationthickness - Incorporates Amendment A1: 2017
2012 CENELEC 0
2846 EN 61754-29 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 29: Type BLINKconnector series
2012 CENELEC 0
2847 EN 62674-1 High frequency inductive components - Part 1: Fixed surface mount inductors for use in electronic and telecommunicationequipment
2012 CENELEC 0
2848 EN 50136-1 Alarm systems - Alarm transmission systems and equipment - Part 1: General requirements for alarm transmission systems 2012 CENELEC 02849 EN 61587-4 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 4: Combination of
performance levels for modular cabinets2012 CENELEC 0
2850 EN 50131-2-7-3 Alarm systems - Intrusion and hold-up systems - Part 2-7-3: Intrusion detectors - Glass break detectors (active) -Incorporates Amendment A2: 2016
2012 CENELEC 0
2851 EN 82079-1 Preparation of instructions for use - Structuring, content and presentation - Part 1: General principles and detailedrequirements
2012 CENELEC 0
2852 EN 60811-510 Electric and optical fibre cables - Test methods for non-metallic materials - Part 510: Mechanical tests - Methods specific topolyethylene and polypropylene compounds - Wrapping test after thermal ageing in air
2012 CENELEC 0
2853 EN 50441-2 Cables for indoor residential telecommunication installations - Part 2: Screened cables - Grade 1 2012 CENELEC 02854 EN 60811-407 Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Miscellaneous tests - Measurement of
mass increase of polyethylene and polypropylene compounds2012 CENELEC 0
2855 EN 62059-32-1 Electricity metering equipment - Dependability - Part 32-1: Durability - Testing of the stability of metrologicalcharacteristics by applying elevated temperature
2012 CENELEC 0
2856 EN 61375-2-2 Electronic railway equipment - Train communication network (TCN) - Part 2-2: Wire Train Bus conformance testing 2012 CENELEC 02857 EN 50367 Railway applications - Current collection systems - Technical criteria for the interaction between pantograph and overhead
line (to achieve free access) - Incorporating corrigendum August 2013; Incorporates Amendment A1: 20162012 CENELEC 0
2858 EN 61969-3 Mechanical structures for electronic equipment - Outdoor enclosures - Part 3: Environmental requirements, tests and safetyaspects
2012 CENELEC 0
2859 EN 60811-511 Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement ofthe melt f low index of polyethylene and polypropylene compounds - Incorporates Amendment A1: 2017
2012 CENELEC 0
2860 EN 61314-1 Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part 1: Generic specification 2012 CENELEC 02861 EN 61754-26 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 26: Type SF connector
family2012 CENELEC 0
2862 EN 61300-3-33 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-33:Examinations and measurements - Withdrawal force from a resilient alignment sleeve using gauge pins
2012 CENELEC 0
2863 EN 61881-3 Railway applications - Rolling stock equipment - Capacitors for power electronics - Part 3: Electric double-layer capacitors- Incorporates Amendment A1: 2013
2012 CENELEC 0
2864 EN 60811-301 Electric and optical fibre cables - Test methods for non-metallic materials - Part 301: Electrical tests - Measurement of thepermittivity at 23 آ°C of filling compounds
2012 CENELEC 0
2865 EN 61300-2-10 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-10: Tests -Crush resistance
2012 CENELEC 0
2866 EN 60512-99-001
Connectors for electronic equipment - Tests and measurements - Part 99-001: Test schedule for engaging and separatingconnectors under electrical load - Test 99a: Connectors used in twisted pair communication cabling with remote power
2012 CENELEC 0
2867 EN 62282-2 Fuel cell technologies - Part 2: Fuel cell modules 2012 CENELEC 02868 EN 50411-3-1 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-1: Fibre
management system, splice wall box, for category C & G2012 CENELEC 0
2869 EN 62305-2 Protection against lightning - Part 2: Risk management 2012 CENELEC 02870 EN 60317-60 Specifications for particular types of winding wires - Part 60: Polyester glass fibre wound minimum class 155 resin or
varnish impregnated or not impregnated, bare or enamelled, rectangular copper wire, temperature index 1552012 CENELEC 0
2871 EN 60811-412 Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageingmethods - Ageing in an air bomb
2012 CENELEC 0
2872 EN 62595-1-2 LCD backlight unit - Part 1-2: Terminology and letter symbols 2012 CENELEC 02873 EN 62075 Audio/video, information and communication technology equipment - Environmentally conscious design - Incorporating
corrigendum March 20132012 CENELEC 0
2874 EN 62628 Guidance on software aspects of dependability 2012 CENELEC 02875 EN 60512-9-2 Connectors for electronic equipment - Tests and measurements - Part 9-2: Endurance tests - Test 9b: Electrical load and
temperature2012 CENELEC 0
2876 EN 50526-1 Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 1: Surge arresters 2012 CENELEC 0
2877 EN 61788-13 Superconductivity - Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in superconductingmultifilamentary composites
2012 CENELEC 0
2878 EN 62132-8 Integrated circuits - Measurement of electromagnetic immunity - Part 8: Measurement of radiated immunity - IC striplinemethod
2012 CENELEC 0
2879 EN 60893-3-1 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1:Specifications for individual materials - Types of industrial rigid laminated sheets
2012 CENELEC 0
2880 EN 50083-2 Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility forequipment - Incorporates Amendment A1: 2015
2012 CENELEC 0
2881 EN 60335-1 Household and similar electrical appliances - Safety - Part 1: General requirements - Incorporating Corrigendum January2014; Incorporates Amendment A13: 2017
2012 CENELEC 0
2882 EN 50581 Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardoussubstances
2012 CENELEC 0
2883 EN 50491-4-1 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems(BACS) - Part 4-1: General functional safety requirements for products intended to be integrated in Building ElectronicSystems (HBES) and Bui
2012 CENELEC 0
2884 EN 60404-15 Magnetic materials - Part 15: Methods for the determination of the relative magnetic permeability of feebly magneticmaterials - Incorporates Amendment A1: 2017
2012 CENELEC 0
2885 EN 60811-508 Electric and optical fibre cables - Test methods for nonmetallic materials - Part 508: Mechanical tests - Pressure test at hightemperature for insulation and sheaths - Incorporates Amendment A1: 2017
2012 CENELEC 0
2886 EN 61784-5-10 Industrial communication networks - Profiles - Part 5-10: Installation of fieldbuses - Installation profiles for CPF 10 -Incorporates Amendment A1: 2015
2012 CENELEC 0
2887 EN 61969-2 Mechanical structures for electronic equipment - Outdoor enclosures - Part 2: Coordination dimensions 2012 CENELEC 02888 EN 60811-404 Electric and optical fibre cables - Test methods for non-metallic materials - Part 404: Miscellaneous tests - Mineral oil
immersion tests for sheaths2012 CENELEC 0
2889 EN 60811-607 Electric and optical fibre cables - Test methods for non-metallic materials - Part 607: Physical tests - Test for theassessment of carbon black dispersion in polyethylene and polypropylene
2012 CENELEC 0
2890 EN 61158-3-21 Industrial communication networks - Fieldbus specifications - Part 3-21: Data-link layer service definition - Type 21elements
2012 CENELEC 0
2891 EN 60335-2-67 Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floor treatment machines forcommercial use
2012 CENELEC 0
2892 EN 61375-3-1 Electronic railway equipment - Train communication network (TCN) - Part 3-1: Multifunction Vehicle Bus (MVB) 2012 CENELEC 02893 CLC/TR 50510 Fibre optic access to end-user - A guideline to building of FTTX fibre optic network 2012 CENELEC 02894 EN 60794-1-23 Optical fibre cables - Part 1-23: Generic specification - Basic optical cable test procedures - Cable element test methods 2012 CENELEC 02895 EN 50379-1 Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances -
Part 1: General requirements and test methods2012 CENELEC 0
2896 EN 50441-4 Cables for indoor residential telecommunication installations - Part 4: Cables up to 1 200 MHz - Grade 3 2012 CENELEC 02897 EN 61029-2-11 Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for combined mitre and bench
saws - Incorporates Amendment A11: 20132012 CENELEC 0
2898 EN 61300-3-39 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-39:Examinations and measurements - Physical contact (PC) optical connector reference plug selection for return lossmeasurements
2012 CENELEC 0
2899 EN 60811-408 Electric and optical fibre cables - Test methods for non-metallic materials - Part 408: Miscellaneous tests - Long-termstability test of polyethylene and polypropylene compounds
2012 CENELEC 0
2900 EN 62149-1 Fibre optic active components and devices - Performance standards - Part 1: General and guidance 2012 CENELEC 02901 EN 50131-2-7-1 Alarm systems - Intrusion and hold-up systems - Part 2-7-1: Intrusion detectors - Glass break detectors (acoustic) -
Incorporates Amendment A2: 20162012 CENELEC 0
2902 EN 60717 Method for the determination of the space required by capacitors and resistors with unidirectional terminations 2012 CENELEC 0
2903 EN 60811-509 Electric and optical fibre cables - Test methods for nonmetallic materials - Part 509: Mechanical tests - Test for resistanceof insulations and sheaths to cracking (heat shock test) - Incorporates Amendment A1: 2017
2012 CENELEC 0
2904 EN 50341-1 Overhead electrical lines exceeding AC 1 kV - Part 1: General requirements - Common specifications 2012 CENELEC 02905 EN 60695-11-3 Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods 2012 CENELEC 02906 EN 60544-5 Electrical insulating materials - Determination of the effects of ionizing radiation - Part 5: Procedures for assessment of
ageing in service2012 CENELEC 0
2907 EN 62575-2 Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality - Part 2: Guidelines for the use 2012 CENELEC 02908 EN 61753-061-
2Fibre optic interconnecting devices and passive components - Performance standard - Part 061-2: Non-connectorizedsingle-mode fibre optic pigtailed isolators for category C - Controlled environment
2012 CENELEC 0
2909 EN 61182-2-2 Printed board assembly products - Manufacturing description data and transfer methodology - Part 2-2: Sectionalrequirements for implementation of printed board fabrication data description
2012 CENELEC 0
2910 EN 61158-4-18 Industrial communication networks - Fieldbus specifications - Part 4-18: Data-link layer protocol specification - Type 18elements
2012 CENELEC 0
2911 EN 60811-501 Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests fordetermining the mechanical properties of insulating and sheathing compounds
2012 CENELEC 0
2912 EN 62282-3-100
Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety 2012 CENELEC 0
2913 EN 62729 Maritime navigation and radiocommunication equipment and systems - Shipborne equipment for long-range identificationand tracking (LRIT) - Performance requirements
2012 CENELEC 0
2914 EN 60811-513 Electric and optical fibre cables - Test methods for non-metallic materials - Part 513: Mechanical tests - Methods specific topolyethylene and polypropylene compounds - Wrapping test after conditioning
2012 CENELEC 0
2915 EN 61300-3-28 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-28:Examinations and measurements - Transient loss
2012 CENELEC 0
2916 EN 62047-5 Semiconductor devices - Micro-electromechanical devices - Part 5: RF MEMS switches 2012 CENELEC 02917 EN 50149 Railway applications - Fixed installations - Electric traction - Copper and copper alloy grooved contact wires 2012 CENELEC 02918 EN 60519-6 Safety in electroheat installations - Part 6: Specifications for safety in industrial microwave heating equipment 2011 CENELEC 02919 EN 62047-12 Semiconductor devices - Micro-electromechanical devices - Part 12: Bending fatigue testing method of thin film materials
using resonant vibration of MEMS structures2011 CENELEC 0
2920 EN 61869-3 Instrument transformers - Part 3: Additional requirements for inductive voltage transformers 2011 CENELEC 02921 EN 50399 Common test methods for cables under fire conditions - Heat release and smoke production measurement on cables during
flame spread test - Test apparatus, procedures, results - Incorporates Amendment A1: 20162011 CENELEC 0
2922 EN 62496-2-2 Optical circuit boards - Part 2-2: Measurements - Dimensions of optical circuit boards 2011 CENELEC 02923 EN 62386-209 Digital addressable lighting interface - Part 209: Particular requirements for control gear - Colour control (device type 8) 2011 CENELEC 02924 EN 50557 Requirements for automatic reclosing devices (ARDs) for circuit breakers- RCBOs-RCCBs for household and similar uses
- Remains Currents2011 CENELEC 0
2925 EN 61307 Industrial microwave heating installations - Test methods for the determination of power output 2011 CENELEC 02926 EN 61029-2-3 Safety of transportable motor-operated electric tools - Part 2-3: Particular requirements for planers and thicknessers 2011 CENELEC 02927 EN 62637-2 Battery charging interface for small handheld multimedia devices - Part 2: 2 mm barrel type interface conformance testing 2011 CENELEC 02928 EN 60763-1 Laminated pressboard for electrical purposes - Part 1: Definitions, classification and general requirements 2011 CENELEC 02929 CLC/TS 60034-
31Rotating electrical machines - Part 31: Selection of energy-efficient motors including variable speed applications -Application guide - Remains Current
2011 CENELEC 0
2930 EN 60038 CENELEC standard voltages 2011 CENELEC 02931 EN 62253 Photovoltaic pumping systems - Design qualification and performance measurements 2011 CENELEC 02932 EN 60300-3-12 Dependability management - Part 3-12: Application guide - Integrated logistic support 2011 CENELEC 02933 EN 61851-1 Electric vehicle conductive charging system - Part 1: General requirements - Remains Current 2011 CENELEC 0
2934 EN 61746-1 Calibration of optical time-domain reflectometers (OTDR) - Part 1: OTDR for single-mode fibres 2011 CENELEC 02935 EN 50525-2-11 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-11: Cables for
general applications - Flexible cables with thermoplastic PVC insulation2011 CENELEC 0
2936 EN 60461 Time and control code 2011 CENELEC 02937 EN 61439-2 Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies 2011 CENELEC 02938 EN 62047-7 Semiconductor devices - Micro-electromechanical devices - Part 7: MEMS BAW filter and duplexer for radio frequency
control and selection2011 CENELEC 0
2939 EN 60268-16 Sound System Equipment - Part 16: Objective Rating of Speech Intelligibility by Speech Transmission Index 2011 CENELEC 02940 EN 62208 Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements 2011 CENELEC 02941 EN 60601-2-57 Medical electrical equipment - Part 2-57: Particular requirements for the basic safety and essential performance of non-laser
light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use2011 CENELEC 0
2942 EN 50563 External a.c. - d.c. and a.c. - a.c. power supplies Determination of no-load power and average efficiency of active modes -Incorporates Amendment A1: 2013
2011 CENELEC 0
2943 EN 60534-2-1 Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions 2011 CENELEC 02944 EN 55016-4-2 Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and
limit modelling - Measurement instrumentation uncertainty - Incorporates Amendment A1: 20142011 CENELEC 0
2945 EN 60671 Nuclear power plants - Instrumentation and control systems important to safety - Surveillance testing 2011 CENELEC 02946 EN 50443 Effects of electromagnetic interference on pipelines caused by high voltage a.c. electric traction systems and/or high
voltage a.c. power supply systems2011 CENELEC 0
2947 EN 61747-5-2 Liquid crystal display devices - Part 5-2: Environmental, endurance and mechanical test methods - Visual inspection ofactive matrix colour liquid crystal display modules
2011 CENELEC 0
2948 EN 61966-12-1 Multimedia systems and equipment - Colour measurement and management - Part 12-1: Metadata for identification ofcolour gamut (Gamut ID)
2011 CENELEC 0
2949 EN 62496-4 Optical circuit boards - Part 4: Interface standards - General and guidance 2011 CENELEC 02950 EN 50548 Junction boxes for photovoltaic modules - Incorporates Amendment A2: 2014 2011 CENELEC 02951 EN 62520 Railway applications - Electric traction - Short-primary type linear induction motors (LIM) fed by power converters 2011 CENELEC 02952 EN 61850-9-2 Communication networks and systems for power utility automation - Part 9-2: Specific communication service mapping
(SCSM) - Sampled values over ISO/IEC 8802-32011 CENELEC 0
2953 EN 50525-2-21 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-21: Cables forgeneral applications - Flexible cables with crosslinked elastomeric insulation
2011 CENELEC 0
2954 EN 61850-4 Communication networks and systems for power utility automation - Part 4: System and project management 2011 CENELEC 02955 EN 50122-1 Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions
against electric shock - Incorporates Amendment A4: 2017, Incorporating Corrigendum November 20122011 CENELEC 0
2956 EN 61199 Single-capped fluorescent lamps - Safety specifications - Incorporates Amendment A2: 2015 2011 CENELEC 02957 EN 60130-9 Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment 2011 CENELEC 02958 EN 60601-2-46 Medical electrical equipment - Part 2-46: Particular requirements for the basic safety and essential performance of
operating tables2011 CENELEC 0
2959 EN 62458 Sound system equipment - Electroacoustic transducers - Measurement of large signal parameters 2011 CENELEC 02960 EN 60793-1-30 Optical fibres - Part 1-30: Measurement methods and test procedures - Fibre proof test 2011 CENELEC 02961 EN 60770-1 Transmitters for use in industrial-process control systems - Part 1: Methods for performance evaluation - Remains Current 2011 CENELEC 02962 EN 62637-1 Battery charging interface for small handheld multimedia devices - Part 1: 2 mm barrel interface 2011 CENELEC 02963 EN 60679-6 Quartz crystal controlled oscillators of assessed quality - Part 6: Phase jitter measurement method for quartz crystal
oscillators and SAW oscillators - Application guidelines2011 CENELEC 0
2964 EN 50377-4-4 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -Part 4-4: Type SC-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconiaferrule category
2011 CENELEC 0
2965 EN 61753-087-2
Fibre optic interconnecting devices and passive components - Performance standard - Part 087-2: Non-connectorizedsingle-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category C - Controlledenvironment
2011 CENELEC 0
2966 EN 61162-450 Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 450: Multiple talkers andmultiple listeners - Ethernet interconnection - Incorporates Amendment A1: 2016; Remains Current
2011 CENELEC 0
2967 EN 60068-2-83 Environmental testing - Part 2-83: Tests - Test Tf: Solderability testing of electronic components for surface mountingdevices (SMD) by the wetting balance method using solder paste
2011 CENELEC 0
2968 EN 62258-2 Semiconductor die products - Part 2: Exchange data formats 2011 CENELEC 02969 EN 50525-2-81 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-81: Cables for
general applications - Cables with crosslinked elastomeric covering for arc welding2011 CENELEC 0
2970 EN 61341 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps 2011 CENELEC 02971 EN 60793-1-44 Optical fibres - Part 1-44: Measurement methods and test procedures - Cut-off wavelength 2011 CENELEC 02972 EN 60601-2-45 Medical electrical equipment - Part 2-45: Particular requirements for the basic safety and essential performance of
mammographic X-ray equipment and mammographic stereotactic devices - Incorporates Amendment A1: 20152011 CENELEC 0
2973 EN 50377-13-2 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -Part 13-2: Type LX.5-PC DUPLEX terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with fullzirconia ferrule categor
2011 CENELEC 0
2974 EN 61290-4-2 Optical amplifiers - Test methods - Part 4-2: Gain transient parameters - Broadband source method 2011 CENELEC 02975 EN 60534-8-3 Industrial-process control valves - Part 8-3: Noise considerations - Control valve aerodynamic noise prediction method 2011 CENELEC 02976 EN 60191-6-17 Mechanical standardization of semiconductor devices - Part 6-17: General rules for the preparation of outline drawings of
surface mounted semiconductor device packages - Design guide for stacked packages - Fine-pitch ball grid array and fine-pitch land gr
2011 CENELEC 0
2977 EN 50533 Railway applications - Three-phase train line voltage characteristics - Incorporates Amendment A1: 2016 2011 CENELEC 02978 EN 50525-2-12 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-12: Cables for
general applications - Cables with thermoplastic PVC insulation for extensible leads2011 CENELEC 0
2979 EN 60512-9-3 Connectors for electronic equipment - Tests and measurements - Part 9-3: Endurance tests - Test 9c: Mechanical operation(engaging/separating) with electrical load
2011 CENELEC 0
2980 EN 61853-1 Photovoltaic (PV) module performance testing and energy rating - Part 1: Irradiance and temperature performancemeasurements and power rating
2011 CENELEC 0
2981 EN 61747-6-2 Liquid crystal display devices - Part 6-2: Measuring methods for liquid crystal display modules - Reflective type 2011 CENELEC 02982 EN 61378-1 Convertor transformers - Part 1: Transformers for industrial applications 2011 CENELEC 02983 EN 62363 Radiation protection instrumentation - Portable photon contamination meters and monitors 2011 CENELEC 02984 EN 61029-2-12 Safety of transportable motor-operated electric tools - Part 2-12: Particular requirements for threading machines 2011 CENELEC 02985 EN 60749-21 Semiconductor devices - Mechanical and climatic test methods - Part 21: Solderability 2011 CENELEC 02986 EN 60674-3-8 Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Balanced biaxially oriented
polyethylene naphthalate (PEN) films used for electrical insulation - Incorporates Amendment A1: 20172011 CENELEC 0
2987 EN 61058-2-5 Switches for appliances - Part 2-5: Particular requirements for change-over selectors 2011 CENELEC 02988 EN 50525-3-11 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-11: Cables
with special fire performance - Flexible cables with halogen-free thermoplastic insulation, and low emission of smoke2011 CENELEC 0
2989 EN 61000-4-15 Electromagnetic compatibility (EMC) - Part 4-15: Testing and measurement techniques - Flickermeter - Functional anddesign specifications
2011 CENELEC 0
2990 EN 62327 Radiation protection instrumentation - Hand-held instruments for the detection and identification of radionuclides and forthe indication of ambient dose equivalent rate from photon radiation
2011 CENELEC 0
2991 EN 60034-16-1 Rotating electrical machines - Part 16-1: Excitation systems for synchronous machines - Definitions 2011 CENELEC 02992 EN 60268-7 Sound system equipment - Part 7: Headphones and earphones 2011 CENELEC 0
2993 EN 50543 Electronic portable and transportable apparatus designed to detect and measure carbon dioxide and/or carbon monoxide inindoor ambient air - Requirements and test methods
2011 CENELEC 0
2994 EN 61558-2-12 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-12: Particular requirements and testsfor constant voltage transformers and power supply units for constant voltage
2011 CENELEC 0
2995 EN 62047-8 Semiconductor devices - Micro-electromechanical devices - Part 8: Strip bending test method for tensile propertymeasurement of thin films
2011 CENELEC 0
2996 EN 60695-7-2 Fire hazard testing - Part 7-2: Toxicity of fire effluent - Summary and relevance of test methods 2011 CENELEC 02997 EN 50525-2-72 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-72: Cables for
general applications - Flat divisible cables (cords) with thermoplastic PVC insulation2011 CENELEC 0
2998 EN 61587-2 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 2: Seismic tests for cabinetsand racks
2011 CENELEC 0
2999 EN 62386-210 Digital addressable lighting interface - Part 210: Particular requirements for control gear - Sequencer (device type 9) 2011 CENELEC 03000 EN 60512-8-2 Connectors for electronic equipment - Tests and measurements - Part 8-2: Static load tests (fixed connectors) - Test 8b:
Static load, axial2011 CENELEC 0
3001 EN 62455 Internet protocol (IP) and transport stream (TS) based service access 2011 CENELEC 03002 EN 60335-2-53 Household and similar electrical appliances - Safety - Part 2-53: Particular requirements for sauna heating appliances and
infrared cabins2011 CENELEC 0
3003 EN 60684-3-271
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 271: Heat-shrinkable elastomersleevings, flame retarded, fluid resistant, shrink ratio 2:1
2011 CENELEC 0
3004 EN 60749-29 Semiconductor devices - Mechanical and climatic test methods - Part 29: Latch-up test 2011 CENELEC 03005 EN 50467 Railway applications - Rolling stock - Electrical connectors, requirements and test methods 2011 CENELEC 03006 EN 61169-35 Radio-frequency connectors - Part 35: Sectional specification for 2,92 series RF connectors 2011 CENELEC 03007 EN 50363-0 Insulating, sheathing and covering materials for low-voltage energy cables - Part 0: General introduction 2011 CENELEC 03008 EN IEC 62554 Sample preparation for measurement of mercury level in fluorescent lamps - Incorporates Amendment A1: 2018 2011 CENELEC 03009 EN 61300-2-6 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-6: Tests -
Tensile strength of coupling mechanism2011 CENELEC 0
3010 EN 61347-2-3 Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescentlamps - Incorporates Amendment A1: 2017
2011 CENELEC 0
3011 EN 62574 Audio, video and multimedia systems - General channel assignment of multichannel audio 2011 CENELEC 03012 EN 60352-8 Solderless connections - Part 8: Compression mount connections - General requirements, test methods and practical
guidance2011 CENELEC 0
3013 EN 61954 Static VAR compensators (SVC) - Testing of thyristor valves - Incorporates Amendment A2: 2017 2011 CENELEC 03014 EN 61029-2-5 Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for band saws - Incorporates
Amendment A11: 20152011 CENELEC 0
3015 EN 50516-1-1 Industrial connector sets and interconnect components to be used in optical fibre control and communication systems -Product specifications - Part 1-1: Type SC-RJ PC industrial terminated on EN 60793-2-10 category A1a and A1bmultimode fibre to meet the
2011 CENELEC 0
3016 EN 61988-2-4 Plasma display panels - Part 2-4: Measuring methods - Visual quality: Image artifacts 2011 CENELEC 03017 EN 50525-2-83 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-83: Cables for
general applications - Multicore cables with crosslinked silicone rubber insulation2011 CENELEC 0
3018 CLC/TR 62685 Industrial communication networks - Profiles - Assessment guideline for safety devices using IEC 61784-3 functionalsafety communication profiles (FSCPs)
2011 CENELEC 0
3019 EN 62459 Sound system equipment - Electroacoustic transducers - Measurement of suspension parts 2011 CENELEC 03020 EN 50090-1 Home and Building Electronic Systems (HBES) - Part 1: Standardization structure 2011 CENELEC 03021 EN 60115-1 Fixed resistors for use in electronic equipment - Part 1: Generic specification - Incorporates Amendment A11: 2015 2011 CENELEC 03022 EN 61400-22 Wind turbines - Part 22: Conformity testing and certification 2011 CENELEC 0
3023 EN 61000-4-22 Electromagnetic compatibility (EMC) - Part 4-22: Testing and measurement techniques - Radiated emission and immunitymeasurements in fully anechoic rooms (FARs)
2011 CENELEC 0
3024 EN 60684-3-283
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 283: Heat-shrinkable, polyolefinsleeving, for bus-bar insulation - Incorporates Amendment A1: 2014
2011 CENELEC 0
3025 EN 62006 Hydraulic machines - Acceptance tests of small hydroelectric installations 2011 CENELEC 03026 EN 50130-4 Alarm systems - Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components
of fire, intruder, hold up, CCTV, access control and social alarm systems - Incorporates Amendment A1: 20142011 CENELEC 0
3027 EN 60819-3-3 Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Unfilled aramid(aromatic polyamide) papers
2011 CENELEC 0
3028 EN 60684-3-116
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 116 and 117: Extrudedpolychloroprene, general purpose
2011 CENELEC 0
3029 EN 62509 Battery charge controllers for photovoltaic systems - Performance and functioning 2011 CENELEC 03030 EN 50525-2-71 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-71: Cables for
general applications - Flat tinsel cables (cords) with thermoplastic PVC insulation2011 CENELEC 0
3031 EN 60079-35-1 Explosive atmospheres - Part 35-1: Caplights for use in mines susceptible to firedamp - General requirements -Construction and testing in relation to the risk of explosion - Incorporating corrigendum September 2011
2011 CENELEC 0
3032 EN 60512-9-4 Connectors for electronic equipment - Tests and measurements - Part 9-4: Endurance tests - Test 9d: Durability of contactretention system and seals (maintenance, ageing)
2011 CENELEC 0
3033 EN 62040-3 Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements 2011 CENELEC 03034 EN 62305-4 Protection against lightning - Part 4: Electrical and electronic systems within structures - Incorporating corrigendum
November 20162011 CENELEC 0
3035 EN 62244 Radiation protection instrumentation - Installed radiation monitors for the detection of radioactive and special nuclearmaterials at national borders
2011 CENELEC 0
3036 EN 61869-5 Instrument transformers - Part 5: Additional requirements for capacitor voltage transformers 2011 CENELEC 03037 EN 60079-19 Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation - Incorporates Amendment 1: 2015 2011 CENELEC 03038 EN 50536 Protection against lightning - Thunderstorm warning systems - Incorporating corrigendum June 2011; Incorporates
Amendment A1: 20122011 CENELEC 0
3039 EN 61169-41 Radio-frequency connectors - Part 41: Sectional specification for CQA series quick lock R.F. coaxial connectors 2011 CENELEC 03040 EN 60076-2 Power transformers - Part 2: Temperature rise for liquid-immersed transformers 2011 CENELEC 03041 EN 60929 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements - Incorporates
Amendment A1: 20162011 CENELEC 0
3042 EN 60505 Evaluation and qualification of electrical insulation systems 2011 CENELEC 03043 EN 62271-206 High-voltage switchgear and controlgear - Part 206: Voltage presence indicating systems for rated voltages above 1 kV and
up to and including 52 kV2011 CENELEC 0
3044 EN 60974-12 Arc welding equipment - Part 12: Coupling devices for welding cables 2011 CENELEC 03045 EN 61300-3-46 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-46:
Measurement - Bore diameter for guide pin in MT ferrules2011 CENELEC 0
3046 EN 50525-2-82 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-82: Cables forgeneral applications - Cables with crosslinked elastomeric insulation for decorative chains
2011 CENELEC 0
3047 EN 50132-5-2 Alarm systems - CCTV surveillance systems for use in security applications - Part 5-2: IP Video Transmission Protocols 2011 CENELEC 03048 EN 62148-2 Fibre optic active components and devices - Package and interface standards - Part 2: SFF 10-pin transceivers 2011 CENELEC 03049 EN 62507-1 Identification systems enabling unambiguous information interchange - Requirements - Part 1: Principles and methods 2011 CENELEC 03050 EN 61812-1 Time relays for industrial and residential use - Part 1: Requirements and tests 2011 CENELEC 03051 EN 50525-1 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 1: General
requirements2011 CENELEC 0
3052 EN 62129-2 Calibration of wavelength/optical frequency measurement instruments - Part 2: Michelson interferometer single wavelengthmeters
2011 CENELEC 0
3053 CLC/TS 60034-24
Rotating electrical machines - Part 24: Online detection and diagnosis of potential failures at the active parts of rotatingelectrical machines and of bearing currents - Application guide
2011 CENELEC 0
3054 EN 62132-2 Integrated circuits - Measurement of electromagnetic immunity - Part 2: Measurement of radiated immunity - TEM cell andwideband TEM cell method
2011 CENELEC 0
3055 EN 50551-1 Simplex and duplex cables to be used for cords - Part 1: Blank Detail Specification and minimum requirements 2011 CENELEC 03056 EN 50065-1 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 1: General requirements,
frequency bands and electromagnetic disturbances2011 CENELEC 0
3057 CLC/TS 60034-18-33
Rotating electrical machines - Part 18-33: Functional evaluation of insulation systems - Test procedures for form-woundwindings - Multifactor evaluation by endurance under simultaneous thermal and electrical stresses
2011 CENELEC 0
3058 EN 61439-1 Low-voltage switchgear and controlgear assemblies - Part 1: General rules 2011 CENELEC 03059 EN 61850-7-1 Communication networks and systems for power utility automation - Part 7-1: Basic communication structure - Principles
and models2011 CENELEC 0
3060 EN 80001-1 Application of risk management for IT-networks incorporating medical devices - Part 1: Roles, responsibilities andactivities
2011 CENELEC 0
3061 EN 61747-6-3 Liquid crystal display devices - Part 6-3: Measuring methods for liquid crystal display modules - Motion artifactmeasurement of active matrix liquid crystal display modules
2011 CENELEC 0
3062 EN 60068-3-1 Environmental testing - Part 3-1: Supporting documentation and guidance - Cold and dry heat tests 2011 CENELEC 03063 EN 50525-2-51 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-51: Cables for
general applications - Oil resistant control cables with thermoplastic PVC insulation2011 CENELEC 0
3064 EN 62524 Multimedia systems and equipment - Multimedia e-publishing and e-books - Readers format for e-publishing 2011 CENELEC 03065 EN 60745-2-22 Hand-held motor-operated electric tools - Safety - Part 2-22: Particular requirements for cut-off machines - Incorporates
Amendment A11: 20132011 CENELEC 0
3066 EN 61500 Nuclear power plants - Instrumentation and control important to safety - Data communication in systems performingcategory A functions
2011 CENELEC 0
3067 EN 62660-1 Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 1: Performance testing 2011 CENELEC 03068 EN 50377-4-2 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -
Part 4-2: Type SC/APC simplex 8آ° terminated on IEC 60793-2-50 of types B1.1 and B1.3 singlemode fibre, with fullzirconia ferrule cate
2011 CENELEC 0
3069 EN 55016-2-2 Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-2: Methods of measurement ofdisturbances and immunity - Measurement of disturbance power
2011 CENELEC 0
3070 EN 62148-3 Fibre optic active components and devices - Package and interface standards - Part 3: SFF 20-pin transceivers 2011 CENELEC 03071 EN 50565-1 Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V - Part 1: General guidance 2011 CENELEC 03072 EN 61788-11 Superconductivity - Part 11: Residual resistance ratio measurement - Residual resistance ratio of Nb3Sn composite
superconductors2011 CENELEC 0
3073 EN 55017 Methods of measurement of the suppression characteristics of passive EMC filtering devices 2011 CENELEC 03074 EN 60534-8-2 Industrial-process control valves - Part 8-2: Noise considerations - Laboratory measurement of noise generated by
hydrodynamic flow through control valves2011 CENELEC 0
3075 EN 62305-3 Protection against lightning - Part 3: Physical damage to structures and life hazard 2011 CENELEC 03076 CLC/TR 62662 Guidance for production, testing and diagnostics of polymer insulators with respect to brittle fracture of core materials 2011 CENELEC 03077 EN 61236 Live working - Saddles, stick clamps and their accessories 2011 CENELEC 03078 EN 50132-5-1 Alarm systems - CCTV surveillance systems for use in security applications - Part 5-1: Video transmission - General video
transmission performance requirements - Incorporating corrigendum July 20122011 CENELEC 0
3079 CLC/TR 50480 Determination of cross-sectional area of conductors and selection of protective devices 2011 CENELEC 03080 EN 62150-2 Fibre optic active components and devices - Test and measurement procedures - Part 2: ATM-PON transceivers 2011 CENELEC 0
3081 EN 50411-6-1 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 6-1:Unprotected microduct for category S and A
2011 CENELEC 0
3082 EN 62516-2 Terrestrial digital multimedia broadcasting (T-DMB) receivers - Part 2: Interactive data services using BIFS 2011 CENELEC 03083 EN 61169-40 Radio-frequency connectors - Part 40: Sectional specification for 2.4 series RF connectors 2011 CENELEC 03084 EN 61076-2-
106Connectors for electronic equipment - Product requirements - Part 2-106: Circular connectors - Detail specification forconnectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67
2011 CENELEC 0
3085 EN 62562 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates 2011 CENELEC 03086 EN 61000-3-12 Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected
to public low-voltage systems with input current > 16 A and â_¤ 75 A per phase2011 CENELEC 0
3087 EN 61058-2-1 Switches for appliances - Part 2-1: Particular requirements for cord switches 2011 CENELEC 03088 EN 61558-2-20 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-20: Particular requirements and tests
for small reactors2011 CENELEC 0
3089 EN 50377-16-1 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -Part 16-1: Type LF3 APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titaniumcomposite ferrule fo
2011 CENELEC 0
3090 EN 62047-10 Semiconductor devices - Micro-electromechanical devices - Part 10: Micro-pillar compression test for MEMS materials 2011 CENELEC 03091 EN 61000-4-21 Electromagnetic compatibility (EMC) - Part 4-21: Testing and measurement techniques - Reverberation chamber test
methods2011 CENELEC 0
3092 EN 61850-8-1 Communication networks and systems for power utility automation - Part 8-1: Specific communication service mapping(SCSM) - Mappings to MMS (ISO 9506-1 and ISO 9506-2) and to ISO/IEC 8802-3
2011 CENELEC 0
3093 EN 50525-2-42 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-42: Cables forgeneral applications - Single core non-sheathed cables with crosslinked EVA insulation
2011 CENELEC 0
3094 EN 61788-6 Superconductivity - Part 6: Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti compositesuperconductors
2011 CENELEC 0
3095 EN 60704-2-10 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-10:Particular requirements for electric cooking ranges, ovens, grills, microwave ovens and any combination of these
2011 CENELEC 0
3096 EN 62549 Articulated systems and flexible systems for cable guiding 2011 CENELEC 03097 EN 61169-19 Radio-frequency connectors - Part 19: Sectional specification - Radio frequency coaxial connectors of type SSMB 2011 CENELEC 03098 EN 61558-2-9 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-9: Particular requirements and tests
for transformers and power supply units for class III handlamps for tungsten filament lamps2011 CENELEC 0
3099 EN 62047-9 Semiconductor devices - Micro-electromechanical devices - Part 9: Wafer to wafer bonding strength measurement forMEMS
2011 CENELEC 0
3100 EN 60252-2 AC motor capacitors - Part 2: Motor start capacitors - Incorporates Amendment A1: 2013 2011 CENELEC 03101 EN 61881-1 Railway applications - Rolling stock equipment - Capacitors for power electronics - Part 1: Paper/plastic film capacitors 2011 CENELEC 03102 EN 61300-2-5 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests -
Torsion2011 CENELEC 0
3103 EN 60684-2 Flexible insulating sleeving - Part 2: Methods of test 2011 CENELEC 03104 EN 61169-39 Radio-frequency connectors - Part 39: Sectional specification for CQM series quick lock RF connectors 2011 CENELEC 03105 EN 62341-6-1 Organic light emitting diode (OLED) displays - Part 6-1: Measuring methods of optical and electro-optical parameters 2011 CENELEC 03106 EN 61557-13 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring
or monitoring of protective measures - Part 13: Hand-held and hand-manipulated current clamps and sensors formeasurement of leaka
2011 CENELEC 0
3107 EN 60749-7 Semiconductor devices - Mechanical and climatic test methods - Part 7: Internal moisture content measurement and theanalysis of other residual gases
2011 CENELEC 0
3108 EN 62481-3 Digital living network alliance (DLNA) home networked device interoperability guidelines - Part 3: Link protection 2011 CENELEC 03109 EN 61394 Overhead lines - Requirements for greases for aluminium, aluminium alloy and steel bare conductors 2011 CENELEC 0
3110 EN 60695-7-3 Fire hazard testing - Part 7-3: Toxicity of fire effluent - Use and interpretation of test results 2011 CENELEC 03111 EN 61300-3-45 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-45:
Examinations and measurements - Attenuation of random mated multi-fibre connectors2011 CENELEC 0
3112 EN 62532 Fluorescent induction lamps - Safety specifications - Incorporates Amendment A1: 2017 2011 CENELEC 03113 EN 62305-1 Protection against lightning - Part 1: General principles 2011 CENELEC 03114 EN 60204-33 Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment 2011 CENELEC 03115 EN 61076-2-
001Connectors for electronic equipment - Product requirements - Part 2-001: Circular connectors - Blank detail specification 2011 CENELEC 0
3116 EN 61967-8 Integrated circuits - Measurement of electromagnetic emissions - Part 8: Measurement of radiated emissions - IC striplinemethod
2011 CENELEC 0
3117 EN 61386-25 Conduit systems for cable management - Part 25: Particular requirements - Conduit fixing devices 2011 CENELEC 03118 EN 61960 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for
portable applications - Remains Current2011 CENELEC 0
3119 EN 60512-17-2 Connectors for electronic equipment - Tests and measurements - Part 17-2: Cable clamping tests - Test 17b: Cable clampresistance to cable rotation
2011 CENELEC 0
3120 EN 50525-2-31 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-31: Cables forgeneral applications - Single core non-sheathed cables with thermoplastic PVC insulation
2011 CENELEC 0
3121 EN 50545-1 Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels Part 1:General performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogenoxides - Incorporate
2011 CENELEC 0
3122 EN 61753-086-6
Fibre optic interconnecting devices and passive components - Performance standard - Part 086-6: Non-connectorizedsingle-mode bidirectional 1 490 / 1 550 nm downstream and 1 310 nm upstream WWDM devices for category O -Uncontrolled environment
2011 CENELEC 0
3123 EN 62464-2 Magnetic resonance equipment for medical imaging - Part 2: Classification criteria for pulse sequences 2011 CENELEC 03124 EN 62359 Ultrasonics - Field characterization - Test methods for the determination of thermal and mechanical indices related to
medical diagnostic ultrasonic fields - Incorporates Amendment A1: 20182011 CENELEC 0
3125 EN 50525-3-31 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-31: Cableswith special fire performance - Single core non-sheathed cables with halogen-free thermoplastic insulation, and lowemission of smoke
2011 CENELEC 0
3126 EN 60191-6-12 Mechanical standardization of semiconductor devices - Part 6-12: General rules for the preparation of outline drawings ofsurface mounted semiconductor device packages - Design guidelines for fine-pitch land grid array (FLGA)
2011 CENELEC 0
3127 EN 61300-2-23 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-23: Tests -Sealing for non-pressurized closures of fibre optic devices
2011 CENELEC 0
3128 EN 61300-3-22 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-22:Examinations and measurements - Ferrule compression force
2011 CENELEC 0
3129 EN 60747-5-5 Semiconductor devices - Discrete devices - Part 5-5: Optoelectronic devices - Photocouplers - Incorporates AmendmentA1: 2015
2011 CENELEC 0
3130 EN 50411-3-2 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-2:Singlemode mechanical fibre splice
2011 CENELEC 0
3131 EN 50564 Electrical and electronic household and office equipment - Measurement of low power consumption 2011 CENELEC 03132 EN 62631-1 Dielectric and resistive properties of solid insulating materials - Part 1: General 2011 CENELEC 03133 EN 60076-16 Power transformers - Part 16: Transformers for wind turbines applications 2011 CENELEC 03134 EN 60567 Oil-filled electrical equipment - Sampling of gases and analysis of free and dissolved gases - Guidance 2011 CENELEC 03135 EN 61534-1 Powertrack systems - Part 1: General requirements - Incorporates Amendment A1: 2014 2011 CENELEC 03136 EN 50377-15-1 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -
Part 15-1: Type MPO with 12-fibre PPS ferrules terminated on IEC 60793-2 category A1a multimode fibre for 50/125micron multimode fibre
2011 CENELEC 0
3137 EN 60695-11-4 Fire hazard testing - Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method 2011 CENELEC 03138 EN 61988-1 Plasma display panels - Part 1: Terminology and letter symbols 2011 CENELEC 03139 EN 61821 Electrical installations for lighting and beaconing of aerodromes - Maintenance of aeronautical ground lighting constant
current series circuits2011 CENELEC 0
3140 EN 50377-13-3 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -Part 13-3: Type LX.5-APC DUPLEX terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with fullzirconia ferrule catego
2011 CENELEC 0
3141 EN 62149-5 Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver andCDR ICs
2011 CENELEC 0
3142 EN 60060-2 High-voltage test techniques - Part 2: Measuring systems 2011 CENELEC 03143 EN 61788-15 Superconductivity - Part 15: Electronic characteristic measurements - Intrinsic surface impedance of superconductor films
at microwave frequencies2011 CENELEC 0
3144 EN 50550 Power frequency overvoltage protective device for household and similar applications (POP) - Incorporates AmendmentA1: 2014
2011 CENELEC 0
3145 EN 50216-12 Power transformer and reactor fittings - Part 12: Fans 2011 CENELEC 03146 EN 60728-6 Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment 2011 CENELEC 03147 EN 60601-2-4 Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential performance of cardiac
defibrillators2011 CENELEC 0
3148 EN 62271-204 High-voltage switchgear and controlgear - Part 204: Rigid gas-insulated transmission lines for rated voltage above 52 kV 2011 CENELEC 03149 EN 140401-804 Detail Specification: Fixed low power film high stability SMD resistors - Rectangular - Stability classes 0,1; 0,25 -
Incorporating corrigenda October 2011 and January 2012; Incorporates Amendment A1: 20132011 CENELEC 0
3150 EN 50377-7-4 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -Part 7-4: LC-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with full zirconia ferrulefor category C
2011 CENELEC 0
3151 EN 62216 Digital terrestrial television receivers for the DVB-T system 2011 CENELEC 03152 EN 60904-5 Photovoltaic devices - Part 5: Determination of the equivalent cell temperature (ECT) of photovoltaic (PV) devices by the
open-circuit voltage method2011 CENELEC 0
3153 EN 60269-6 Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energysystems
2011 CENELEC 0
3154 EN 62376 Maritime navigation and radiocommunication equipment and systems - Electronic chart system (ECS) - Operational andperformance requirements, methods of testing and required test results
2011 CENELEC 0
3155 EN 60603-7-1 Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors 2011 CENELEC 03156 EN 50516-2-1 Industrial connector sets and interconnect components to be used in optical fibre control and communication systems -
Product specifications - Part 2-1: Type ODVA PC industrial terminated on EN 60793-2-10 category A1a and A1bmultimode fibre to meet the r
2011 CENELEC 0
3157 EN 62660-2 Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 2: Reliability and abuse testing 2011 CENELEC 03158 EN 60475 Method of sampling insulating liquids 2011 CENELEC 03159 EN 62271-103 High-voltage switchgear and controlgear - Part 103: Switches for rated voltages above 1 kV up to and including 52 kV 2011 CENELEC 03160 EN 62496-3 Optical circuit boards - Part 3: Performance standards - General and guidance 2011 CENELEC 03161 EN 50525-2-22 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-22: Cables for
general applications - High flexibility braided cables with crosslinked elastomeric insulation2011 CENELEC 0
3162 EN 60974-13 Arc welding equipment - Part 13: Welding clamp 2011 CENELEC 03163 EN 50525-3-21 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-21: Cables
with special fire performance - Flexible cables with halogen-free crosslinked insulation, and low emission of smoke2011 CENELEC 0
3164 EN 60118-13 Electroacoustics - Hearing aids - Part 13: Electromagnetic compatibility (EMC) 2011 CENELEC 0
3165 EN 62271-106 High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor-starters
2011 CENELEC 0
3166 EN 60749-40 Semiconductor devices - Mechanical and climatic test methods - Part 40: Board level drop test method using a strain gauge 2011 CENELEC 03167 EN 50525-3-41 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-41: Cables
with special fire performance - Single core non-sheathed cables with halogen-free crosslinked insulation, and low emissionof smoke
2011 CENELEC 0
3168 EN 61076-2 Connectors for electronic equipment - Product requirements - Part 2: Sectional specification for circular connectors 2011 CENELEC 03169 EN 60684-3-
205Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 205: Heat-shrinkablechlorinated polyolefin sleeving, flame retarded, nominal shrink ratio 1,7:1 and 2:1
2011 CENELEC 0
3170 EN 50525-2-41 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-41: Cables forgeneral applications - Single core cables with crosslinked silicone rubber insulation
2011 CENELEC 0
3171 EN 61937-10 Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 10: Non-linear PCMbitstreams according to the MPEG-4 Audio Lossless Coding (ALS) format
2011 CENELEC 0
3172 EN 60076-1 Power transformers - Part 1: General 2011 CENELEC 03173 EN 60745-2-3 Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type
sanders - Incorporates Amendment A13: 20152011 CENELEC 0
3174 EN 61753-131-3
Fibre optic interconnecting devices and passive components - Performance standard - Part 131-3: Single-mode mechanicalfibre splice for category U - Uncontrolled environment
2011 CENELEC 0
3175 EN 61850-7-3 Communication networks and systems for power utility automation - Part 7-3: Basic communication structure - Commondata classes
2011 CENELEC 0
3176 EN 50411-3-3 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-3:Singlemode optical fibre fusion splice protectors
2011 CENELEC 0
3177 EN 61169-18 Radio-frequency connectors - Part 18: Sectional specification - Radio frequency coaxial connectors of type SSMA 2011 CENELEC 03178 EN 61300-2-17 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-17: Tests -
Cold2011 CENELEC 0
3179 EN 60684-3-247
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 247: Heat-shrinkable polyolefinsleeving, dual wall, not flame retarded, thick and medium wall - Incorporates Amendment A1: 2017
2011 CENELEC 0
3180 EN 60763-3-1 Laminated pressboard for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Requirements forlaminated precompressed pressboard, Types LB 3.1A.1 and LB3.1A.2
2011 CENELEC 0
3181 EN 61784-3-18 Industrial communication networks - Profiles - Part 3-18: Functional safety fieldbuses - Additional specifications for CPF18 - Incorporates Amendment A1: 2017
2011 CENELEC 0
3182 EN 61753-141-2
Fibre optic interconnecting devices and passive components - Performance standard - Part 141-2: Fibre optic passivechromatic dispersion compensator using single-mode dispersion compensating fibre for category C - Controlledenvironments
2011 CENELEC 0
3183 EN 60212 Standard conditions for use prior to and during the testing of solid electrical insulating materials 2011 CENELEC 03184 EN 50130-5 Alarm systems - Part 5: Environmental test methods 2011 CENELEC 03185 EN 50128 Railway applications - Communication, signalling and processing systems - Software for railway control and protection
systems - Incorporating corrigendum February 20142011 CENELEC 0
3186 EN 62109-2 Safety of power converters for use in photovoltaic power systems - Part 2: Particular requirements for inverters 2011 CENELEC 03187 EN 60252-1 AC motor capacitors - Part 1: General - Performance, testing and rating - Safety requirements - Guidance for installation
and operation - Incorporates Amendment A1: 20132011 CENELEC 0
3188 EN 60794-2-10 Optical fibre cables - Part 2-10: Indoor optical fibre cables - Family specification for simplex and duplex cables 2011 CENELEC 03189 EN 62496-2-1 Optical circuit boards - Part 2-1: Measurements - Optical attenuation and isolation 2011 CENELEC 03190 EN 61280-1-3 Fibre optic communication subsystem test procedures - Part 1-3: General communication subsystems - Central wavelength
and spectral width measurement2010 CENELEC 0
3191 EN 50132-1 Alarm systems - CCTV surveillance systems for use in security applications - Part 1: System requirements - Incorporatingcorrigendum June 2010
2010 CENELEC 0
3192 CLC/TS 50131-7
Alarm systems - Intrusion and hold-up systems - Part 7: Application guidelines 2010 CENELEC 0
3193 EN 61386-24 Conduit systems for cable management - Part 24: Particular requirements - Conduit systems buried underground 2010 CENELEC 03194 EN 62395-2 Electrical resistance trace heating systems for industrial and commercial applications - Part 2: Application guide for system
design, installation and maintenance2010 CENELEC 0
3195 EN 62502 Analysis techniques for dependability - Event tree analysis (ETA) 2010 CENELEC 03196 EN 61508-3 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements 2010 CENELEC 03197 EN 62058-21 Electricity metering equipment (a.c.) - Acceptance inspection - Part 21: Particular requirements for electromechanical
meters for active energy (classes 0,5, 1 and 2 and class indexes A and B)2010 CENELEC 0
3198 EN 60684-3-281
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 281: Heat-shrinkable, polyolefinsleeving, semiconductive
2010 CENELEC 0
3199 EN 60034-1 Rotating electrical machines - Part 1: Rating and performance - Incorporating Corrigendum October 2010 2010 CENELEC 03200 EN 61850-6 Communication networks and systems for power utility automation - Part 6: Configuration description language for
communication in electrical substations related to IEDs2010 CENELEC 0
3201 EN 60730-2-7 Automatic electrical controls for household and similar use - Part 2-7: Particular requirements for timers and time switches- Incorporating corrigendum December 2011
2010 CENELEC 0
3202 EN 60512-19-1 Connectors for electronic equipment - Tests and measurements - Part 19-1: Chemical resistance tests - Test 19a: Fluidresistance of pre-insulated crimp barrels
2010 CENELEC 0
3203 EN 60255-11 Measuring relays and protection equipment - Part 11: Voltage dips, short interruptions, variations and ripple on auxiliarypower supply port
2010 CENELEC 0
3204 EN 60191-6-18 Mechanical standardization of semiconductor devices - Part 6-18: General rules for the preparation of outline drawings ofsurface mounted semiconductor device packages - Design guide for ball grid array (BGA)
2010 CENELEC 0
3205 EN 60317-57 Specifications for particular types of winding wires - Part 57: Polyamide-imide enamelled round copper wire, class 220 2010 CENELEC 03206 EN 50325-5 Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 5: Functional
safety communication based on EN 50325-42010 CENELEC 0
3207 EN 61558-2-8 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-8: Particular requirements and testsfor transformers and power supply units for bells and chimes
2010 CENELEC 0
3208 EN 60794-3-11 Optical fibre cables - Part 3-11: Outdoor cables - Product specification for duct, directly buried and lashed aerial single-mode optical fibre telecommunication cables
2010 CENELEC 0
3209 EN 61508-1 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements 2010 CENELEC 03210 CLC/TR 50555 Interruption indexes 2010 CENELEC 03211 EN 62439-1 Industrial communication networks - High availability automation networks - Part 1: General concepts and calculation
methods - Incorporates Amendment A2: 20172010 CENELEC 0
3212 EN 60546-2 Controllers with analogue signals for use in industrial-process control systems - Part 2: Guidance for inspection and routinetesting
2010 CENELEC 0
3213 EN 55024 Information technology equipment - Immunity characteristics - Limits and methods of measurement - IncorporatesAmendment A1: 2015; Remains Current
2010 CENELEC 0
3214 EN 60335-2-7 Household and similar electrical appliances - Safety - Part 2-7: Particular requirements for washing machines - IncorporatesAmendment A11: 2013
2010 CENELEC 0
3215 EN 60695-2-13 Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test methodfor materials - Incorporates Amendment A1: 2014
2010 CENELEC 0
3216 EN 60749-15 Semiconductor devices - Mechanical and climatic test methods - Part 15: Resistance to soldering temperature for through-hole mounted devices - Incorporating corrigendum February 2011
2010 CENELEC 0
3217 EN 61788-8 Superconductivity - Part 8: AC loss measurements - Total AC loss measurement of round superconducting wires exposedto a transverse alternating magnetic field at liquid helium temperature by a pickup coil method
2010 CENELEC 0
3218 EN 61753-121-3
Fibre optic interconnecting devices and passive components - Performance standard - Part 121-3: Simplex and duplex cordswith single-mode fibre and cylindrical ferrule connectors for category U - Uncontrolled environment
2010 CENELEC 0
3219 EN 55016-1-1 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance andimmunity measuring apparatus - Measuring apparatus - Incorporates Amendment A2: 2014
2010 CENELEC 0
3220 EN 60534-7 Industrial-process control valves - Part 7: Control valve data sheet 2010 CENELEC 03221 EN 50122-2 Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 2: Provisions against the
effects of stray currents caused by d.c. traction systems2010 CENELEC 0
3222 EN 61784-3-1 Industrial communication networks - Profiles - Part 3-1: Functional safety fieldbuses - Additional specifications for CPF 1 2010 CENELEC 03223 EN 62475 High-current test techniques - Definitions and requirements for test currents and measuring systems 2010 CENELEC 03224 EN 60349-1 Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic converter-
fed alternating current motors2010 CENELEC 0
3225 EN 60335-2-89 Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigeratingappliances with an incorporated or remote refrigerant condensing unit or compressor - Incorporates Amendment A2: 2017
2010 CENELEC 0
3226 EN 61191-6 Printed board assemblies - Part 6: Evaluation criteria for voids in soldered joints of BGA and LGA and measurementmethod
2010 CENELEC 0
3227 EN 60512-7-1 Connectors for electronic equipment - Tests and measurements - Part 7-1: Impact tests (free connectors) - Test 7a: Free fall(repeated)
2010 CENELEC 0
3228 EN 60603-7-7 Connectors for electronic equipment - Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors for datatransmission with frequencies up to 600 MHz
2010 CENELEC 0
3229 EN 62041 Safety of transformers, reactors, power supply units and combinations thereof - EMC requirements 2010 CENELEC 03230 EN 50529-1 EMC Network Standard - Part 1: Wire-line telecommunications networks using telephone wires 2010 CENELEC 03231 EN 50522 Earthing of power installations exceeding 1 kV a.c. 2010 CENELEC 03232 EN 50491-5-2 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems
(BACS) - Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light industry environment2010 CENELEC 0
3233 EN 61099 Insulating liquids - Specifications for unused synthetic organic esters for electrical purposes 2010 CENELEC 03234 EN 62209-2 Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Human
models, instrumentation, and procedures - Part 2: Procedure to determine the specific absorption rate (SAR) for wirelesscommunication devices
2010 CENELEC 0
3235 EN 60728-13 Cable networks for television signals, sound signals and interactive services - Part 13: Optical systems for broadcast signaltransmissions
2010 CENELEC 0
3236 EN 60079-29-4 Explosive atmospheres - Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases 2010 CENELEC 03237 EN 61666 Industrial systems, installations and equipment and industrial products - Identification of terminals within a system 2010 CENELEC 03238 CLC/TS 61850-
80-1Communication networks and systems for power utility automation - Part 80-1: Guideline to exchanging information froma CDC-based data model using IEC 60870-5-101 or IEC 60870-5-104
2010 CENELEC 0
3239 EN 61784-3-14 Industrial communication networks - Profiles - Part 3-14: Functional safety fieldbuses - Additional specifications for CPF14
2010 CENELEC 0
3240 EN 60964 Nuclear power plants - Control rooms - Design 2010 CENELEC 03241 EN 60512-21-1 Connectors for electronic equipment - Tests and measurements - Part 21-1: R.F. resistance tests - Test 21a: R.F. shunt
resistance2010 CENELEC 0
3242 EN 61508-2 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements forelectrical/electronic/programmable electronic safety-related systems
2010 CENELEC 0
3243 EN 61029-2-8 Safety of transportable motor-operated electric tools - Part 2-8: Particular requirements for single spindle vertical moulders 2010 CENELEC 03244 EN 62490-1 ESL measuring method - Part 1: Capacitors with lead terminal for use in electronic equipment 2010 CENELEC 03245 EN 60512-17-4 Connectors for electronic equipment - Tests and measurements - Part 17-4: Cable clamping tests - Test 17d: Cable clamp
resistance to cable torsion2010 CENELEC 0
3246 EN 62439-4 Industrial communication networks - High availability automation networks - Part 4: Cross-network Redundancy Protocol(CRP) - Incorporates Amendment A1: 2012
2010 CENELEC 0
3247 EN 62058-11 Electricity metering equipment (a.c.) - Acceptance inspection - Part 11: General acceptance inspection methods 2010 CENELEC 0
3248 EN 60730-2-15 Automatic electrical controls for household and similar use - Part 2-15: Particular requirements for automatic electrical airflow, water flow and water level sensing controls
2010 CENELEC 0
3249 EN 60027-7 Letter symbols to be used in electrical technology - Part 7: Power generation, transmission and distribution 2010 CENELEC 03250 CLC/TS 50537-
3Railway applications - Mounted parts of the traction transformer and cooling system - Part 3: Water pump for tractionconverters
2010 CENELEC 0
3251 EN 50104 Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods 2010 CENELEC 03252 EN 60745-2-16 Hand-held motor-operated electric tools - Safety - Part 2-16: Particular requirements for tackers 2010 CENELEC 03253 EN 61300-2-21 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-21: Tests -
Composite temperature/humidity cyclic test2010 CENELEC 0
3254 EN 60546-1 Controllers with analogue signals for use in industrial-process control systems - Part 1: Methods of evaluating theperformance
2010 CENELEC 0
3255 EN 62317-2 Ferrite cores - Dimensions - Part 2: Pot-cores for use in telecommunications, power supply, and filter applications -Incorporating Corrigendum August 2010
2010 CENELEC 0
3256 EN 60317-12 Specifications for particular types of winding wires - Part 12: Polyvinyl acetal enamelled round copper wire, class 120 2010 CENELEC 03257 EN 60603-7-41 Connectors for electronic equipment - Part 7-41: Detail specification for 8-way, unshielded, free and fixed connectors, for
data transmissions with frequencies up to 500 MHz2010 CENELEC 0
3258 EN 61937-12 Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 12: Non-linear PCMbitstreams according to the DRA formats
2010 CENELEC 0
3259 EN 62329-3-100
Heat-shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements andcompatibility performance - Sheet 100: Heat-shrinkable moulded shape dimensions
2010 CENELEC 0
3260 EN 60318-4 Electroacoustics - Simulators of human head and ear - Part 4: Occluded-ear simulator for the measurement of earphonescoupled to the ear by means of ear inserts
2010 CENELEC 0
3261 EN 60904-10 Photovoltaic devices - Part 10: Methods of linearity measurement 2010 CENELEC 03262 EN 60335-2-2 Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-
suction cleaning appliances - Incorporates Amendment A1: 20132010 CENELEC 0
3263 EN 60512-9-5 Connectors for electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic 2010 CENELEC 03264 EN 60146-1-1 Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic
requirements2010 CENELEC 0
3265 CLC/TR 50538 Guide to EMC Directive conformity of equipment designed for military purposes 2010 CENELEC 03266 EN 50159 Railway applications - Communication, signalling and processing systems - Safety-related communication in transmission
systems2010 CENELEC 0
3267 EN 31010 Risk management - Risk assessment techniques 2010 CENELEC 03268 EN 60512-9-1 Connectors for electronic equipment - Tests and measurements - Part 9-1: Endurance tests - Test 9a: Mechanical operation 2010 CENELEC 03269 EN 60264-4-1 Packaging of winding wires - Part 4-1: Methods of test - Delivery spools made from thermoplastic materials 2010 CENELEC 03270 EN 60368-3 Piezoelectric filters of assessed quality - Part 3: Standard outlines and lead connections 2010 CENELEC 03271 EN 60384-26-1 Fixed capacitors for use in electronic equipment - Part 26-1: Blank detail specification - Fixed aluminum electrolytic
capacitors with conductive polymer solid electrolyte - Assessment level EZ2010 CENELEC 0
3272 EN 60645-6 Electroacoustics - Audiometric equipment - Part 6: Instruments for the measurement of otoacoustic emissions 2010 CENELEC 03273 EN 50206-2 Railway applications - Rolling stock - Pantographs: Characteristics and tests - Part 2: Pantographs for metros and light rail
vehicles2010 CENELEC 0
3274 EN 61760-3 Surface mounting technology - Part 3: Standard method for the specification of components for Through Hole Reflow(THR) soldering
2010 CENELEC 0
3275 EN 60603-7-51 Connectors for electronic equipment - Part 7-51: Detail specification for 8-way, shielded, free and fixed connectors, fordata transmissions with frequencies up to 500 MHz
2010 CENELEC 0
3276 EN 60601-2-33 Medical electrical equipment - Part 2-33: Particular requirements for the basic safety and essential performance of magneticresonance equipment for medical diagnosis - Incorporating Corrigendum October 2010; Incorporates Amendment A12:2016
2010 CENELEC 0
3277 EN 60335-2-105
Household and similar electrical appliances - Safety Part 2-105: Particular requirements for multifunctional showercabinets
2010 CENELEC 0
3278 EN 50498 Electromagnetic compatibility (EMC) - Product family standard for aftermarket electronic equipment in vehicles 2010 CENELEC 03279 EN 60335-2-4 Household and similar electrical appliances Safety Part 2-4: Particular requirements for spin extractors - Incorporates
Amendment A11: 20182010 CENELEC 0
3280 EN 61754-24 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 24: Type SC-RJconnector family
2010 CENELEC 0
3281 EN 60645-7 Electroacoustics - Audiometric equipment - Part 7: Instruments for the measurement of auditory brainstem responses 2010 CENELEC 03282 EN 60730-2-9 Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing
controls2010 CENELEC 0
3283 EN 60745-2-1 Hand-held motor-operated electric tools - Safety - Part 2-1: Particular requirements for drills and impact drills - RemainsCurrent
2010 CENELEC 0
3284 EN 61010-2-030
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-030: Particularrequirements for testing and measuring circuits
2010 CENELEC 0
3285 EN 50529-2 EMC Network Standard - Part 2: Wire-line telecommunications networks using coaxial cables 2010 CENELEC 03286 EN 62329-3-
102Heat-shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements andcompatibility performance - Sheet 102: Heat-shrinkable elastomeric moulded shapes, semi-rigid, material requirements andsystem performance
2010 CENELEC 0
3287 EN 60317-58 Specifications for particular types of winding wires - Part 58: Polyamide-imide enamelled rectangular copper wire, class220
2010 CENELEC 0
3288 EN 61558-2-23 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-23: Particular requirements and testsfor transformers and power supply units for construction sites
2010 CENELEC 0
3289 EN 61907 Communication network dependability engineering 2010 CENELEC 03290 CLC/TR 50485 Electromagnetic compatibility - Emission measurements in fully anechoic chambers 2010 CENELEC 03291 EN 61373 Railway applications - Rolling stock equipment - Shock and vibration tests 2010 CENELEC 03292 EN 60709 Nuclear power plants - Instrumentation and control systems important to safety - Separation 2010 CENELEC 03293 CLC/TS 50537-
2Railway applications - Mounted parts of the traction transformer and cooling system - Part 2: Pump for insulating liquid fortraction transformers and reactors
2010 CENELEC 0
3294 EN 62058-31 Electricity metering equipment (a.c.) - Acceptance inspection - Part 31: Particular requirements for static meters for activeenergy (classes 0,2 S, 0,5 S, 1 and 2, and class indexes A, B and C)
2010 CENELEC 0
3295 EN 62374-1 Semiconductor devices - Part 1: Time-dependent dielectric breakdown (TDDB) test for inter-metal layers - IncorporatingCorrigendum April 2011
2010 CENELEC 0
3296 EN 60684-3-282
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 282: Heat-shrinkable, polyolefinsleeving - Stress control
2010 CENELEC 0
3297 EN 60079-20-1 Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data 2010 CENELEC 03298 EN 61508-4 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and
abbreviations2010 CENELEC 0
3299 EN 60335-2-109
Household and similar electrical appliances - Safety - Part 2-109: Particular requirements for UV radiation water treatmentappliances - Incorporates Amendment A2: 2018
2010 CENELEC 0
3300 EN 60335-2-77 Safety of household and similar appliances - Part 2-77: Particular requirements for pedestrian-controlled walk-behindelectrically powered lawn mowers
2010 CENELEC 0
3301 EN 62514 Multimedia gateway in home networks - Guidelines 2010 CENELEC 0
3302 EN 61076-3-115
Connectors for electronic equipment - Product requirements - Part 3-115: Rectangular connectors - Detail specification forprotective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrialenvironments
2010 CENELEC 0
3303 EN 60068-2-53 Environmental testing - Part 2-53: Tests and guidance: Combined climatic (temperature/humidity) and dynamic(vibration/shock) tests
2010 CENELEC 0
3304 EN 60695-2-12 Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods - Glow-wire flammability index (GWFI) test methodfor materials - Incorporates Amendment A1: 2014
2010 CENELEC 0
3305 EN 61784-3-6 Industrial communication networks - Profiles - Part 3-6: Functional safety fieldbuses - Additional specifications for CPF 6 2010 CENELEC 03306 EN 50386 Bushings up to 1 kV and from 250 A to 5 kA, for liquid filled transformers - Incorporates Amendment A1: 2013 2010 CENELEC 03307 CLC/TS 50537-
4Railway applications - Mounted parts of the traction transformer and cooling system - Part 4: Gas and liquid actuated(Buchholz) relay for liquid immersed transformers and reactors with conservator for rail vehicles
2010 CENELEC 0
3308 EN 60947-4-1 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors andmotor-starters - Incorporates Amendment A1: 2012
2010 CENELEC 0
3309 EN 61975 High-voltage direct current (HVDC) installations - System tests - Incorporates Amendment A1: 2017 2010 CENELEC 03310 EN 60191-6-20 Mechanical standardization of semiconductor devices - Part 6-20: General rules for the preparation of outline drawings of
surface mounted semiconductor device packages - Measuring methods for package dimensions of small outline J-leadpackages (SOJ)
2010 CENELEC 0
3311 EN 60770-2 Transmitters for use in industrial-process control systems - Part 2: Methods for inspection and routine testing - RemainsCurrent
2010 CENELEC 0
3312 EN 60512-20-1 Connectors for electronic equipment - Tests and measurements - Part 20-1: Fire hazard tests - Test 20a: Flammability,needle-flame
2010 CENELEC 0
3313 EN 50377-8-13 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -Part 8-13: Type LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titaniumcomposite ferrule for
2010 CENELEC 0
3314 EN 60745-2-2 Hand-held motor-operated electric tools - Safety - Part 2-2: Particular requirements for screwdrivers and impact wrenches -Remains Current
2010 CENELEC 0
3315 EN 50160 Voltage characteristics of electricity supplied by public electricity networks - Incorporating Corrigendum December 2010;Incorporates Amendment A1: 2015
2010 CENELEC 0
3316 EN 60666 Detection and determination of specified additives in mineral insulating oils 2010 CENELEC 03317 EN 60603-7-2 Connectors for electronic equipment - Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for
data transmissions with frequencies up to 100 MHz2010 CENELEC 0
3318 EN 62614 Fibre optics - Launch condition requirements for measuring multimode attenuation 2010 CENELEC 03319 EN 50181 Plug-in type bushings above 1 kV up to 52 kV and from 250 A to 2,50 kA for equipment other than liquid filled
transformers2010 CENELEC 0
3320 EN 60704-1 Household and similar electrical appliances - Test code for the determination of airborne noise - Part 1: Generalrequirements - Incorporates Amendment A1: 2012
2010 CENELEC 0
3321 EN 60401-2 Terms and nomenclature for cores made of magnetically soft ferrites - Part 2: Reference of dimensions 2010 CENELEC 03322 EN 60335-2-13 Household and similar electrical appliances - Safety - Part 2-13: Particular requirements for deep fat fryers, frying pans and
similar appliances - Incorporates Amendment A11: 20122010 CENELEC 0
3323 EN 50206-1 Railway applications - Rolling stock - Pantographs: Characteristics and tests - Part 1: Pantographs for main line vehicles 2010 CENELEC 03324 EN 62150-4 Fibre optic active components and devices - Test and measurement procedures - Part 4: Relative intensity noise using a
time-domain optical detection system2010 CENELEC 0
3325 EN 60512-22-1 Connectors for electronic equipment - Tests and measurements - Part 22-1: Capacitance tests - Test 22a: Capacitance 2010 CENELEC 03326 EN 60601-2-43 Medical electrical equipment - Part 2-43: Particular requirements for the basic safety and essential performance of X-ray
equipment for interventional procedures - Incorporates Amendment A1: 20182010 CENELEC 0
3327 EN 61977 Fibre optic interconnecting devices and passive components - Fibre optic filters - Generic specification 2010 CENELEC 03328 EN 50342-5 Lead-acid starter batteries - Part 5: Properties of battery housings and handles 2010 CENELEC 0
3329 EN 62508 Guidance on human aspects of dependability 2010 CENELEC 03330 CLC/TS 50539-
22Low-voltage surge protective devices - Surge protective devices for specific application including d.c. - Part 22: Selectionand application principles - Wind turbine applications
2010 CENELEC 0
3331 EN 62490-2 ESL measuring method - Part 2: Surface mount capacitors for use in electronic equipment 2010 CENELEC 03332 EN 60603-7-71 Connectors for electronic equipment - Part 7-71: Detail specification for 8-way, shielded, free and fixed connectors, for
data transmission with frequencies up to 1 000 MHz2010 CENELEC 0
3333 EN 60974-11 Arc welding equipment - Part 11: Electrode holders 2010 CENELEC 03334 EN 62537 Interface for loudspeakers with digital input signals based on IEC 60958 2010 CENELEC 03335 EN 61753-111-
7Fibre optic interconnecting devices and passive components performance standard - Part 111-7: Sealed closures forcategory A - Aerial
2010 CENELEC 0
3336 EN 60601-1-6 Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateralstandard: Usability - Incorporates Amendment A1: 2015
2010 CENELEC 0
3337 EN 60749-34 Semiconductor devices - Mechanical and climatic test methods - Part 34: Power cycling 2010 CENELEC 03338 EN 61169-14 Radio-frequency connectors - Part 14: R.F. coaxial connectors with inner diameter of outer conductor 12 mm with screw
coupling - Characteristic impedance 75 ohms (Type 3,5/12)2010 CENELEC 0
3339 CLC/TR 50173-99-2
Information technology - Implementation of BCT applications using cabling in accordance with EN 50173-4 2010 CENELEC 0
3340 EN 60335-2-24 Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers
2010 CENELEC 0
3341 EN 61076-2-107
Connectors for electronic equipment - Product requirements - Part 2-107: Detail specification for circular hybrid connectorsM12 with electrical and fibre-optic contacts with screw locking
2010 CENELEC 0
3342 EN 62047-6 Semiconductor devices - Micro-electromechanical devices - Part 6: Axial fatigue testing methods of thin film materials 2010 CENELEC 03343 EN 60191-6-21 Mechanical standardization of semiconductor devices - Part 6-21: General rules for the preparation of outline drawings of
surface mounted semiconductor device packages - Measuring methods for package dimensions of small outline packages(SOP)
2010 CENELEC 0
3344 EN 60512-20-3 Connectors for electronic equipment - Tests and measurements - Part 20-3: Fire hazard tests - Test 20c: Flammability,glow-wire
2010 CENELEC 0
3345 EN 61249-2-41 Materials for printed boards and other interconnecting structures - Part 2-41: Reinforced base materials clad and unclad -Brominated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burningtest), copper-
2010 CENELEC 0
3346 EN 60891 Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics 2010 CENELEC 03347 EN 61400-24 Wind turbines - Part 24: Lightning protection 2010 CENELEC 03348 EN 50377-8-10 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -
Part 8-10: Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titaniumcomposite ferrule fo
2010 CENELEC 0
3349 CLC/TR 62541-2
OPC unified architecture - Part 2: Security model 2010 CENELEC 0
3350 EN 61280-1-4 Fibre optic communication subsystem test procedures - Part 1-4: General communication subsystems - Light sourceencircled flux measurement method
2010 CENELEC 0
3351 EN 62340 Nuclear power plants - Instrumentation and control systems important to safety - Requirements for coping with CommonCause Failure (CCF)
2010 CENELEC 0
3352 EN 50340 Hydraulic cable cutting devices - Devices to be used on electrical installations with nominal voltage up to AC 30 kV 2010 CENELEC 03353 EN 60349-2 Electric traction - Rotating electrical machines for rail and road vehicles - Part 2: Electronic converter-fed alternating
current motors2010 CENELEC 0
3354 EN 60745-2-5 Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circular saws - Remains Current 2010 CENELEC 03355 EN 60745-2-6 Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers 2010 CENELEC 03356 EN 60613 Electrical and loading characteristics of X-ray tube assemblies for medical diagnosis 2010 CENELEC 0
3357 EN 50530 Overall efficiency of grid connected photovoltaic inverters - Incorporates Amendment A1: 2013 2010 CENELEC 03358 EN 62489-1 Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 1: Methods of measuring and
specifying the performance of system components - Incorporates Amendment A2: 20182010 CENELEC 0
3359 EN 60704-2-2 Household and similar appliances - Test code for the determination of airborne acoustical noise - Part 2-2: Particularrequirements for fan heaters
2010 CENELEC 0
3360 EN 61788-14 Superconductivity - Part 14: Superconducting power devices - General requirements for characteristic tests of current leadsdesigned for powering superconducting devices
2010 CENELEC 0
3361 EN 61076-3-118
Connectors for electronic equipment - Product requirements - Part 3-118: Rectangular connectors - Detail specification fora 4 pole + PE power connector with push-pull coupling
2010 CENELEC 0
3362 EN 61850-7-2 Communication networks and systems for power utility automation - Part 7-2: Basic information and communicationstructure - Abstract communication service interface (ACSI)
2010 CENELEC 0
3363 EN 60601-2-52 Medical electrical equipment - Part 2-52: Particular requirements for basic safety and essential performance of medicalbeds - Incorporating Corrigendum April 2011; Incorporates Amendment A1: 2015
2010 CENELEC 0
3364 EN 60684-3-280
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 280: Heat-shrinkable, polyolefinsleeving, anti-tracking - Incorporates Amendment A1: 2014
2010 CENELEC 0
3365 EN 60060-1 High-voltage test techniques - Part 1: General definitions and test requirements 2010 CENELEC 03366 EN 60034-2-2 Rotating electrical machines - Part 2-2: Specific methods for determining separate losses of large machines from tests -
Supplement to IEC 60034-2-12010 CENELEC 0
3367 EN 60695-7-1 Fire hazard testing - Part 7-1: Toxicity of fire effluent - General guidance 2010 CENELEC 03368 EN 61508-6 Functional safety of electrical/electronic/programmable electronic safetyrelated systems - Part 6: Guidelines on the
application of IEC 61508-2 and IEC 61508-32010 CENELEC 0
3369 EN 50085-2-3 Cable trunking systems and cable ducting systems for electrical installations - Part 2-3: Particular requirements for slottedcable trunking systems intended for installation in cabinets
2010 CENELEC 0
3370 EN 62258-1 Semiconductor die products - Part 1: Procurement and use 2010 CENELEC 03371 CLC/TR 62541-
1OPC unified architecture - Part 1: Overview and concepts 2010 CENELEC 0
3372 CLC/TS 50535 Railway applications - Onboard auxiliary power converter systems 2010 CENELEC 03373 EN 62479 Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human
exposure to electromagnetic fields (10 MHz to 300 GHz)2010 CENELEC 0
3374 EN 50495 Safety devices required for the safe functioning of equipment with respect to explosion risks 2010 CENELEC 03375 EN 61753-111-
8Fibre optic interconnecting devices and passive components performance standard - Part 111-8: Sealed closures forcategory G - Ground
2010 CENELEC 0
3376 EN 60079-15 Explosive atmospheres - Part 15: Equipment protection by type of protection "n" - Remains Current 2010 CENELEC 03377 EN 61512-4 Batch control - Part 4: Batch production records 2010 CENELEC 03378 EN 55016-1-4 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and
immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements - Incorporates AmendmentA2: 2017
2010 CENELEC 0
3379 EN 60793-1-31 Optical fibres - Part 1-31: Measurement methods and test procedures - Tensile strength 2010 CENELEC 03380 EN 60939-1 Passive filter units for electromagnetic interference suppression - Part 1: Generic specification 2010 CENELEC 03381 EN 60909-3 Short-circuit currents in three-phase a.c systems - Part 3: Currents during two separate simultaneous line-to-earth short-
circuits and partial short-circuit currents flowing through earth2010 CENELEC 0
3382 EN 61231 International lamp coding system (ILCOS) - Incorporates Amendment A1: 2013 2010 CENELEC 03383 EN 50291-2 Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 2: Electrical apparatus for continuous
operation in a fixed installation in recreational vehicles and similar premises including recreational craft - Additional testmet
2010 CENELEC 0
3384 EN 61936-1 Power installations exceeding 1 kV a.c. - Part 1: Common rules - Incorporates Amendment A1: 2014 2010 CENELEC 0
3385 EN 50191 Erection and operation of electrical test equipment 2010 CENELEC 03386 EN 62616 Maritime navigation and radiocommunication equipment and systems - Bridge navigational watch alarm system (BNWAS) 2010 CENELEC 03387 EN 61010-1 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements 2010 CENELEC 03388 EN 61935-2 Specification for the testing of balanced and coaxial information technology cabling - Part 2: Cords as specified in ISO/IEC
11801 and related standards2010 CENELEC 0
3389 EN 61097-14 Global maritime distress and safety system (GMDSS) - Part 14: AIS Search And Rescue Transmitter (AIS-SART) -Operational and performance requirements, methods of testing and required test results
2010 CENELEC 0
3390 EN 61210 Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements 2010 CENELEC 03391 EN 50491-5-1 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems
(BACS) - Part 5-1: EMC requirements, conditions and test set-up2010 CENELEC 0
3392 EN 60512-8-1 Connectors for electronic equipment - Tests and measurements - Part 8-1: Static load tests (fixed connectors) - Test 8a:Static load, transverse
2010 CENELEC 0
3393 EN 62109-1 Safety of power converters for use in photovoltaic power systems - Part 1: General requirements 2010 CENELEC 03394 EN 50397-3 Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV a.c. and not exceeding 36
kV a.c. - Part 3: Guide to use2010 CENELEC 0
3395 EN 61558-2-5 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-5: Particular requirements and testsfor transformer for shavers, power supply units for shavers and shaver supply units
2010 CENELEC 0
3396 EN 60317-13 Specifications for particular types of winding wires - Part 13: Polyester or polyesterimide overcoated with polyamide-imideenamelled round copper wire, class 200
2010 CENELEC 0
3397 EN 50110-2 Operation of electrical installations - Part 2: National annexes 2010 CENELEC 03398 EN 62417 Semiconductor devices - Mobile ion tests for metal-oxide semiconductor field effect transistors (MOSFETs) 2010 CENELEC 03399 EN 60191-6-19 Mechanical standardization of semiconductor devices - Part 6-19: Measurement methods of the package warpage at
elevated temperature and the maximum permissible warpage2010 CENELEC 0
3400 EN 60793-1-41 Optical fibres - Part 1-41: Measurement methods and test procedures - Bandwidth 2010 CENELEC 03401 EN 60122-3 Quartz crystal units of assessed quality - Part 3: Standard outlines and lead connections 2010 CENELEC 03402 CLC/TS 50544 Low voltage d.c. surge protective device for traction systems - Selection and application rules for surge arresters 2010 CENELEC 03403 EN 62496-3-1 Optical circuit boards - Performance standard - Part 3-1: Flexible optical circuit boards using unconnectorized optical glass
fibres2010 CENELEC 0
3404 EN 62416 Semiconductor devices - Hot carrier test on MOS transistors 2010 CENELEC 03405 EN 60317-17 Specifications for particular types of winding wires - Part 17: Polyvinyl acetal enamelled rectangular copper wire, class 105 2010 CENELEC 03406 EN 60745-2-11 Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre
saws)2010 CENELEC 0
3407 EN 60684-3-209
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 209: Heat-shrinkable polyolefinsleeving, general purpose, flame retarded
2010 CENELEC 0
3408 EN 61391-2 Ultrasonics - Pulse-echo scanners - Part 2: Measurement of maximum depth of penetration and local dynamic range 2010 CENELEC 03409 EN 61753-111-
9Fibre optic interconnecting devices and passive components performance standard - Part 111-9: Sealed closures forcategory S - Subterranean
2010 CENELEC 0
3410 EN 61508-5 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods forthe determination of safety integrity levels
2010 CENELEC 0
3411 EN 62563-1 Medical electrical equipment - Medical image display systems - Part 1: Evaluation methods - Incorporates Amendment A1:2016
2010 CENELEC 0
3412 EN 61747-5-3 Liquid crystal display devices - Part 5-3: Environmental, endurance and mechanical test methods - Glass strength andreliability
2010 CENELEC 0
3413 EN 60793-1-32 Optical fibres - Part 1-32: Measurement methods and test procedures - Coating strippability 2010 CENELEC 03414 EN 62149-4 Fibre optic active components and devices - Performance standards - Part 4: 1 300 nm fibre optic transceivers for Gigabit
Ethernet application2010 CENELEC 0
3415 EN 50540 Conductors for overhead lines - Aluminium Conductors Steel Supported (ACSS) 2010 CENELEC 03416 EN 50411-2-9 Fibre organisers and closures to be used in optical fibre communications systems - Product specifications - Part 2-9: Non-
sealed closures for air blown fibre microduct cable, for category S & A2010 CENELEC 0
3417 EN 61000-4-20 Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing intransverse electromagnetic (TEM) waveguides
2010 CENELEC 0
3418 EN 60034-18-32
Rotating electrical machines - Part 18-32: Functional evaluation of insulation systems - Test procedures for form-woundwindings - Evaluation by electrical endurance
2010 CENELEC 0
3419 EN 60317-25 Specifications for particular types of winding wires - Part 25: Polyester or polyesterimide overcoated with polyamide-imideenamelled round aluminium wire, class 200
2010 CENELEC 0
3420 EN 60079-25 Explosive atmospheres - Part 25: Intrinsically safe electrical systems 2010 CENELEC 03421 EN 50122-3 Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 3: Mutual Interaction of
a.c. and d.c. traction systems2010 CENELEC 0
3422 EN 60297-3-106
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part3-106: Adaptation dimensions for subracks and chassis applicable with metric cabinets or racks in accordance with IEC60917-2-1
2010 CENELEC 0
3423 EN 60603-7-3 Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for datatransmission with frequencies up to 100 MHz
2010 CENELEC 0
3424 HD 60269-3 Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for householdand similar applications) - Examples of standardized systems of fuses A to F - Incorporates Amendment A1: 2013
2010 CENELEC 0
3425 EN 62333-3 Noise suppression sheet for digital devices and equipment - Part 3: Characterization of parameters of noise suppressionsheet
2010 CENELEC 0
3426 EN 61108-3 Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part3: Galileo receiver equipment - Performance requirements, methods of testing and required test results
2010 CENELEC 0
3427 EN 62282-6-100
Fuel cell technologies - Part 6-100: Micro fuel cell power systems - Safety 2010 CENELEC 0
3428 EN 60335-2-11 Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryers - IncorporatesAmendment A1: 2015
2010 CENELEC 0
3429 CLC/TS 50534 Railway applications - Generic system architectures for onboard electric auxiliary power systems 2010 CENELEC 03430 CLC/TR 62271-
208High-voltage switchgear and controlgear - Part 208: Methods to quantify the steady state, power-frequency electromagneticfields generated by HV switchgear assemblies and HV/LV prefabricated substations
2010 CENELEC 0
3431 EN 61508-7 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniquesand measures
2010 CENELEC 0
3432 CLC/TS 50206-3
Railway applications - Rolling stock - Pantographs: Characteristics and tests - Part 3: Interface between pantograph androlling stock for rail vehicles
2010 CENELEC 0
3433 EN 60255-1 Measuring relays and protection equipment - Part 1: Common requirements 2010 CENELEC 03434 EN 60832-1 Live working - Insulating sticks and attachable devices - Part 1: Insulating sticks 2010 CENELEC 03435 EN 61937-11 Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 11: MPEG-4 AAC and its
extensions in LATM/LOAS2010 CENELEC 0
3436 EN 50528 Insulating ladders for use on or near low voltage electrical installations 2010 CENELEC 03437 EN 60603-7-4 Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for
data transmissions with frequencies up to 250 MHz2010 CENELEC 0
3438 EN 62415 Semiconductor devices - Constant current electromigration test 2010 CENELEC 03439 EN 60034-18-1 Rotating electrical machines - Part 18-1: Functional evaluation of insulation systems - General guidelines 2010 CENELEC 03440 EN 50348 Stationary electrostatic application equipment for non-ignitable liquid coating material - Safety requirements 2010 CENELEC 03441 EN 60317-8 Specifications for particular types of winding wires - Part 8: Polyesterimide enamelled round copper wire, class 180 2010 CENELEC 03442 EN 61508-1 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements 2010 CENELEC 0
3443 EN 61300-2-24 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-24: Tests -Screen testing of ceramic alignment split sleeve by stress application
2010 CENELEC 0
3444 EN 61226 Nuclear power plants - Instrumentation and control important to safety - Classification of instrumentation and controlfunctions
2010 CENELEC 0
3445 EN 62439-6 Industrial communication networks - High availability automation networks - Part 6: Distributed Redundancy Protocol(DRP)
2010 CENELEC 0
3446 EN 61558-2-3 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-3: Particular requirements and testsfor ignition transformers for gas and oil burners
2010 CENELEC 0
3447 EN 60512-17-1 Connectors for electronic equipment - Tests and measurements - Part 17-1: Cable clamping tests - Test 17a: Cable clamprobustness
2010 CENELEC 0
3448 EN 50491-5-3 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems(BACS) - Part 5-3: EMC requirements for HBES/BACS used in industry environment
2010 CENELEC 0
3449 EN 62329-3-101
Heat-shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements andcompatibility performance - Sheet 101: Heat-shrinkable moulded shapes, polyolefin, semi-rigid, limited fire hazard,material requirements a
2010 CENELEC 0
3450 EN 80601-2-30 Medical electrical equipment - Part 2-30: Particular requirements for the basic safety and essential performance ofautomated non-invasive sphygmomanometers - Incorporates Amendment A1: 2015
2010 CENELEC 0
3451 EN 50491-2 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems(BACS) - Part 2: Environmental conditions - Incorporates Amendment A1: 2015
2010 CENELEC 0
3452 EN 60143-4 Series capacitors for power systems - Part 4: Thyristor controlled series capacitors 2010 CENELEC 03453 EN 61207-1 Expression of performance of gas analyzers - Part 1: General 2010 CENELEC 03454 EN 60917-2-4 Modular order for the development of mechanical structures for electronic equipment practices - Part 2-4: Sectional
specification - Interface coordination dimensions for the 25 mm equipment practice - Adaptation dimensions for subracksor chassis applicab
2010 CENELEC 0
3455 EN 61000-4-8 Electromagnetic compatibility (EMC)- Part 4-8: Testing and measurement techniques - Power frequency magnetic fieldimmunity test
2010 CENELEC 0
3456 EN 60444-11 Measurement of quartz crystal unit parameters - Part 11: Standard method for the determination of the load resonancefrequency fL and the effective load capacitance CLeff using automatic network analyzer techniques and error correction
2010 CENELEC 0
3457 EN 61249-2-42 Materials for printed boards and other interconnecting structures - Part 2-42: Reinforced base materials clad and unclad -Brominated epoxide non-woven / woven E-glass reinforced laminate sheets of defined flammability (vertical burning test),copper-clad
2010 CENELEC 0
3458 EN 60601-2-28 Medical electrical equipment - Part 2-28: Particular requirements for the basic safety and essential performance of X-raytube assemblies for medical diagnosis
2010 CENELEC 0
3459 EN 61850-7-4 Communication networks and systems for power utility automation - Part 7-4: Basic communication structure - Compatiblelogical node classes and data object classes
2010 CENELEC 0
3460 EN 50377-8-12 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -Part 8-12: Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titaniumcomposite ferrule fo
2010 CENELEC 0
3461 EN 61784-3-12 Industrial communication networks - Profiles - Part 3-12: Functional safety fieldbuses - Additional specifications for CPF12
2010 CENELEC 0
3462 EN 61280-2-1 Fibre optic communication subsystem test procedures - Part 2-1: Digital systems - Receiver sensitivity and overloadmeasurement
2010 CENELEC 0
3463 EN 62047-4 Semiconductor devices - Micro-electromechanical devices - Part 4: Generic specification for MEMS 2010 CENELEC 03464 EN 50554 Basic standard for the in-situ assessment of a broadcast site related to general public exposure to radio frequency
electromagnetic fields2010 CENELEC 0
3465 EN 60832-2 Live working - Insulating sticks and attachable devices - Part 2: Attachable devices 2010 CENELEC 03466 EN 60512-17-3 Connectors for electronic equipment - Tests and measurements - Part 17-3: Cable clamping tests - Test 17c: Cable clamp
resistance to cable pull (tensile)2010 CENELEC 0
3467 CLC/TS 50537-1
Railway applications - Mounted parts of the traction transformer and cooling system - Part 1: HV bushing for tractiontransformers
2010 CENELEC 0
3468 EN 60512-23-2 Connectors for electronic equipment - Tests and measurements - Part 23-2: Screening and filtering tests - Test 23b:Suppression characteristics of integral filters
2010 CENELEC 0
3469 EN 62418 Semiconductor devices - Metallization stress void test 2010 CENELEC 03470 EN 50519 Assessment of workers exposure to electric and magnetic fields of industrial induction heating equipment 2010 CENELEC 03471 EN 61029-2-6 Safety of transportable motor-operated electric tools - Part 2-6: Particular requirements for diamond drills with water
supply - Remains Current2010 CENELEC 0
3472 EN 61300-2-48 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-48: Tests -Temperature-humidity cycling
2009 CENELEC 0
3473 EN 62386-203 Digital addressable lighting interface - Part 203: Particular requirements for control gear - Discharge lamps (excludingfluorescent lamps) (device type 2)
2009 CENELEC 0
3474 EN 61095 Electromechanical contactors for household and similar purposes 2009 CENELEC 03475 EN 50524 Data sheet and name plate for photovoltaic inverters 2009 CENELEC 03476 EN 62138 Nuclear power plants - Instrumentation and control important for safety - Software aspects for computer-based systems
performing category B or C functions2009 CENELEC 0
3477 CLC/TR 62453-502
Field device tool (FDT) interface specification - Part 502: Communication implementation for common object model - IEC61784 CPF 2
2009 CENELEC 0
3478 EN 62110 Electric and magnetic field levels generated by AC power systems - Measurement procedures with regard to publicexposure
2009 CENELEC 0
3479 EN 60598-2-14 Luminaires - Part 2-14: Particular requirements - Luminaires for cold cathode tubular discharge lamps (neon tubes) andsimilar equipment
2009 CENELEC 0
3480 CLC/TR 62453-503-1
Field device tool (FDT) interface specification - Part 503-1: Communication implementation for common object model -IEC 61784 CP 3/1 and CP 3/2
2009 CENELEC 0
3481 EN 60749-20 Semiconductor devices - Mechanical and climatic test methods - Part 20: Resistance of plastic encapsulated SMDs to thecombined effect of moisture and soldering heat
2009 CENELEC 0
3482 EN 50216-9 Power transformer and reactor fittings - Part 9: Oil-to-water heat exchangers 2009 CENELEC 03483 EN 61883-8 Consumer audio/video equipment - Digital interface - Part 8: Transmission of ITU-R BT.601 style digital video data -
Incorporates Amendment A1: 20142009 CENELEC 0
3484 EN 50377-2-2 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -Part 2-2: FC/APC 8 terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule,category C
2009 CENELEC 0
3485 EN 61249-4-14 Materials for printed boards and other interconnecting structures - Part 4-14: Sectional specification set for prepregmaterials, unclad (for the manufacture of multilayer boards) - Epoxide woven E-glass prepreg of defined flammability(vertical burning t
2009 CENELEC 0
3486 EN 61755-3-1 Fibre optic connector optical interfaces - Part 3-1: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconiaPC ferrule, single mode fibre
2009 CENELEC 0
3487 EN 61300-2-2 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-2: Tests -Mating durability
2009 CENELEC 0
3488 EN 60870-5-6 Telecontrol equipment and systems - Part 5-6: Guidelines for conformance testing for the EN 60870-5 companionstandards
2009 CENELEC 0
3489 EN 50483-1 Test requirements for low voltage aerial bundled cable accessories - Part 1: Generalities 2009 CENELEC 03490 EN 61988-3-2 Plasma display panels - Part 3-2: Interface - Electrical interface 2009 CENELEC 03491 EN 61937-3 Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 3: Non-linear PCM
bitstreams according to the AC-3 and enhanced AC-3 formats2009 CENELEC 0
3492 EN 60603-7-5 Connectors for electronic equipment - Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for datatransmissions with frequencies up to 250 MHz
2009 CENELEC 0
3493 EN 61249-2-38 Materials for printed boards and other interconnecting structures - Part 2-38: Reinforced base materials, clad and unclad -Non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad forlead-free as
2009 CENELEC 0
3494 EN 50131-3 Alarm systems - Intrusion and hold-up systems - Part 3: Control and indicating equipment 2009 CENELEC 03495 EN 60534-2-4 Industrial-process control valves - Part 2-4: Flow capacity - Inherent flow characteristics and rangeability 2009 CENELEC 03496 EN 62341-1-2 Organic light emitting diode displays - Part 1-2: Terminology and letter symbols 2009 CENELEC 03497 EN 60947-3 Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
- Incorporates Amendment A2: 20152009 CENELEC 0
3498 EN 62386-206 Digital addressable lighting interface - Part 206: Particular requirements for control gear - Conversion from digital signalinto d. c. voltage (device type 5)
2009 CENELEC 0
3499 EN 62097 Hydraulic machines, radial and axial - Performance conversion method from model to prototype 2009 CENELEC 03500 EN 60728-7-3 Cable networks for television signals, sound signals and interactive services - Part 7-3: Hybrid fibre coax outside plant
status monitoring - Power supply to transponder interface bus (PSTIB)2009 CENELEC 0
3501 EN 61558-2-6 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6:Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolatingtransformers
2009 CENELEC 0
3502 CLC/TR 62453-501
Field device tool (FDT) interface specification - Part 501: Communication implementation for common object model - IEC61784 CPF 1
2009 CENELEC 0
3503 EN 62386-202 Digital addressable lighting interface - Part 202: Particular requirements for control gear - Self-contained emergencylighting (device type 1)
2009 CENELEC 0
3504 EN 60745-2-21 Hand-held motor-operated electric tools - Safety - Part 2-21: Particular requirements for drain cleaners - IncorporatesAmendment A1: 2010
2009 CENELEC 0
3505 EN 50131-8 Alarm systems - Intrusion and hold-up systems - Part 8: Security fog device/systems 2009 CENELEC 03506 CLC/TS 61836 Solar photovoltaic energy systems - Terms, definitions and symbols 2009 CENELEC 03507 EN 61300-3-2 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-2:
Examinations and measurements - Polarization dependent loss in a single-mode fibre optic device2009 CENELEC 0
3508 EN 50508 Multi-purpose insulating sticks for electrical operations on high voltage installations 2009 CENELEC 03509 CLC/TR 62453-
509Field device tool (FDT) interface specification - Part 509: Communication implementation for common object model - IEC61784 CPF 9
2009 CENELEC 0
3510 EN 60745-2-19 Hand-held motor-operated electric tools - Safety - Part 2-19: Particular requirements for jointers - Incorporates AmendmentA1: 2010
2009 CENELEC 0
3511 EN 61482-1-1 Live working - Protective clothing against the thermal hazards of an electric arc - Part 1-1: Test methods - Method 1:Determination of the arc rating (ATPV or EBT50) of flame resistant materials for clothing
2009 CENELEC 0
3512 EN 61547 Equipment for general lighting purposes - EMC immunity requirements 2009 CENELEC 03513 EN 60689 Measurement and test methods for tuning fork quartz crystal units in the range from 10 kHz to 200 kHz and standard values 2009 CENELEC 03514 EN 61249-2-36 Materials for printed boards and other interconnecting structures - Part 2-36: Reinforced base materials, clad and unclad -
Epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly2009 CENELEC 0
3515 EN 62501 Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing -Incorporates Amendment A2: 2017
2009 CENELEC 0
3516 EN 62024-2 High frequency inductive components - Electrical characteristics and measuring methods - Part 2: Rated current ofinductors for DC to DC converters
2009 CENELEC 0
3517 EN 50397-2 Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV AC and not exceeding 36kV AC - Part 2: Accessories for covered conductors - Tests and acceptance criteria
2009 CENELEC 0
3518 EN 62448 Multimedia systems and equipment - Multimedia E-publishing and E-books - Generic format for E-publishing 2009 CENELEC 03519 EN 61169-38 Radio-frequency connectors - Part 38: Sectional specification - Radio frequency coaxial connectors model, slide-in (rack
and panel applications) - Characteristic impedance 50 ohms (type TMA) - 50 ohms applications2009 CENELEC 0
3520 EN 60966-3-1 Radio frequency and coaxial cable assemblies - Part 3-1: Blank detail specification for semi-flexible coaxial cableassemblies
2009 CENELEC 0
3521 EN 61249-2-35 Materials for printed boards and other interconnecting structures - Part 2-35: Reinforced base materials, clad and unclad -Modified epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-freeassembly
2009 CENELEC 0
3522 CLC/TR 62453-41
Field device tool (FDT) interface specification - Part 41: Object model integration profile - Common object model 2009 CENELEC 0
3523 EN 50143 Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 000V but not exceeding 10 000 V
2009 CENELEC 0
3524 EN 62496-1 Optical circuit boards - Part 1: General 2009 CENELEC 03525 EN 60749-20-1 Semiconductor devices - Mechanical and climatic test methods - Part 20-1: Handling, packing, labelling and shipping of
surface-mount devices sensitive to the combined effect of moisture and soldering heat2009 CENELEC 0
3526 EN 60947-7-3 Low-voltage switchgear and controlgear - Part 7-3: Ancillary equipment - Safety requirements for fuse terminal blocks 2009 CENELEC 03527 EN 60601-2-21 Medical electrical equipment - Part 2-21: Particular requirements for the basic safety and essential performance of infant
radiant warmers - Incorporates Amendment A1: 20162009 CENELEC 0
3528 EN 60519-21 Safety in electroheat installations - Part 21: Particular requirements for resistance heating equipment - Heating and meltingglass equipment
2009 CENELEC 0
3529 EN 61987-10 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 10: Listsof properties (LOPs) for industrial-process measurement and control for electronic data exchange - Fundamentals
2009 CENELEC 0
3530 EN 61477 Live working - Minimum requirements for the utilization of tools, devices and equipment - Incorporating CorrigendumFebruary 2010
2009 CENELEC 0
3531 EN 60601-2-20 Medical electrical equipment - Part 2-20: Particular requirements for the basic safety and essential performance of infanttransport incubators - Incorporates Amendment A1: 2016
2009 CENELEC 0
3532 EN 60745-2-15 Hand-held motor-operated electric tools - Safety - Part 2-15: Particular requirements for hedge trimmers - IncorporatesAmendment A1: 2010
2009 CENELEC 0
3533 EN 50176 Stationary electrostatic application equipment for ignitable liquid coating material - Safety requirements 2009 CENELEC 03534 EN 50216-10 Power transformer and reactor fittings - Part 10: Oil-to-air heat exchangers 2009 CENELEC 03535 EN 50119 Railway applications - Fixed installations - Electric traction overhead contact lines - Incorporates Amendment A1: 2013 2009 CENELEC 03536 EN 60601-2-54 Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray
equipment for radiography and radioscopy - Incorporates Amendment A1: 20152009 CENELEC 0
3537 EN 61280-2-3 Fibre optic communication subsystem test procedures - Part 2-3: Digital systems - Jitter and wander measurements -Incorporating corrigendum March 2010
2009 CENELEC 0
3538 EN 60904-4 Photovoltaic devices - Part 4: Reference solar devices - Procedures for establishing calibration traceability 2009 CENELEC 03539 CLC/TR 62453-
506Field device tool (FDT) interface specification - Part 506: Communication implementation for common object model - IEC61784 CPF 6
2009 CENELEC 0
3540 EN 80601-2-35 Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heatingdevices using blankets, pads and mattresses and intended for heating in medical use - Incorporates Amendment A1: 2016
2009 CENELEC 0
3541 EN 61169-24 Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling,typically for use in 75 ohm cable networks (type F)
2009 CENELEC 0
3542 EN 50345 Railway applications - Fixed installations - Electric traction - Insulating synthetic rope assemblies for support of overheadcontact lines
2009 CENELEC 0
3543 EN 50523-1 Household appliances interworking - Part 1: Functional specification 2009 CENELEC 03544 EN 60745-2-9 Hand-held motor-operated electric tools - Safety - Part 2-9: Particular requirements for tappers - Remains Current 2009 CENELEC 03545 EN 62137-1-4 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-4: Cyclic
bending test2009 CENELEC 0
3546 EN 60424-5 Ferrite cores - Guide on the limits of surface irregularities - Part 5: Planar-cores 2009 CENELEC 03547 EN 62379-2 Common control interface for networked digital audio and video products - Part 2: Audio 2009 CENELEC 0
3548 EN 60703 Test methods for electroheating installations with electron guns 2009 CENELEC 03549 EN 60300-3-11 Dependability management - Part 3-11: Application guide - Reliability centred maintenance 2009 CENELEC 03550 EN 60745-2-13 Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain saws - Incorporates
Amendment A1: 20102009 CENELEC 0
3551 EN 61754-25 Fibre optic connector interfaces - Part 25: Type RAO connector family 2009 CENELEC 03552 EN 61300-2-12 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-12: Tests -
Impact2009 CENELEC 0
3553 EN 62341-1-1 Organic light emitting diode (OLED) displays - Part 1-1: Generic specifications 2009 CENELEC 03554 EN 62134-1 Fibre optic interconnecting devices and passive components - Fibre optic closures - Part 1: Generic specification 2009 CENELEC 03555 EN 60393-1 Potentiometers for use in electronic equipment - Part 1: Generic specification 2009 CENELEC 03556 EN 60904-7 Photovoltaic devices - Part 7: Computation of the spectral mismatch correction for measurements of photovoltaic devices 2009 CENELEC 03557 EN 62535 Insulating liquids - Test method for detection of potentially corrosive sulphur in used and unused insulating oil 2009 CENELEC 03558 EN 55103-2 Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control
apparatus for professional use - Part 2: Immunity - Remains Current2009 CENELEC 0
3559 EN 61966-5 Multimedia systems and equipment - Colour measurement and management - Part 5: Equipment using plasma displaypanels
2009 CENELEC 0
3560 EN 80000-14 Quantities and units - Part 14: Telebiometrics related to human physiology 2009 CENELEC 03561 EN 62267 Railway applications - Automated urban guided transport (AUGT) - Safety requirements 2009 CENELEC 03562 EN 60626-2 Combined flexible materials for electrical insulation - Part 2: Methods of test 2009 CENELEC 03563 EN 62453-315 Field device tool (FDT) interface specification Part 315: Communication profile integration IEC 61784 CPF 15 -
Incorporates Amendment A1: 20172009 CENELEC 0
3564 EN 50131-4 Alarm systems - Intrusion and hold-up systems - Part 4: Warning devices 2009 CENELEC 03565 EN 50411-2-5 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-5: Sealed
closures for air blown fibre microduct, type 1, for category S & A2009 CENELEC 0
3566 EN 61535 Installation couplers intended for permanent connection in fixed installations - Incorporates Amendment A1: 2013 2009 CENELEC 03567 CLC/TR 62453-
503-2Field device tool (FDT) interface specification - Part 503-2: Communication implementation for common object model -IEC 61784 CP 3/4, CP 3/5 and CP 3/6
2009 CENELEC 0
3568 EN 60300-3-15 Dependability management - Part 3-15: Application guide - Engineering of system dependability 2009 CENELEC 03569 EN 60947-7-2 Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper
conductors2009 CENELEC 0
3570 EN 61984 Connectors - Safety requirements and tests 2009 CENELEC 03571 EN 61988-5 Plasma display panels - Part 5: Generic specification 2009 CENELEC 03572 EN 60880 Nuclear power plants - Instrumentation and control systems important to safety - Software aspects for computer-based
systems performing category A functions2009 CENELEC 0
3573 EN 61988-2-3 Plasma display panels - Part 2-3: Measuring methods - Image quality: defects and degradation 2009 CENELEC 03574 EN 61995-2 Devices for the connection of luminaires for household and similar purposes - Part 2: Standard sheets for DCL -
Incorporates Amendment A1: 20172009 CENELEC 0
3575 EN 60745-2-18 Hand-held motor-operated electric tools - Safety - Part 2-18: Particular requirements for strapping tools 2009 CENELEC 03576 EN 60603-7 Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors -
Incorporates Amendment A1: 20112009 CENELEC 0
3577 EN 61073-1 Fibre optic interconnecting devices and passive components - Mechanical splices and fusion splice protectors for opticalfibres and cables - Part 1: Generic specification
2009 CENELEC 0
3578 EN 60851-2 Winding wires - Test methods - Part 2: Determination of dimensions - Incorporates Amendment A1: 2015 2009 CENELEC 03579 EN 62271-109 High-voltage switchgear and controlgear - Part 109: Alternating-current series capacitor by-pass switches - Incorporates
Amendment A1: 20132009 CENELEC 0
3580 EN 61535 Installation couplers intended for permanent connection in fixed installations - Incorporates Amendment A1: 2013 2009 CENELEC 03581 CLC/TS 50398 Alarm systems - Combined and integrated alarm systems - General requirements 2009 CENELEC 03582 EN 61753-086-
2Fibre optic interconnecting devices and passive components performance standard - Part 086-2: Non-connectorised single-mode bidirectional 1490 / 1550 nm downstream 1310 nm upstream WWDM devices for category C - Controlledenvironment
2009 CENELEC 0
3583 EN 62148-11 Fibre optic active components and devices - Package and interface standards - Part 11: 14-pin active device modules 2009 CENELEC 03584 EN 60318-1 Electroacoustics - Simulators of human head and ear - Part 1: Ear simulator for the measurement of supra-aural and
circumaural earphones2009 CENELEC 0
3585 CLC/TR 62453-61
Field device tool interface (FDT) specification - Part 61: Device type manager (DTM) - Styleguide for common objectmodel
2009 CENELEC 0
3586 EN 61754-24-11
Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 24-11: Type SC-RJconnectors with protective housings based on IEC 61076-3-117
2009 CENELEC 0
3587 EN 61076-3-117
Connectors for electronic equipment - Product requirements - Part 3-117: Rectangular connectors - Detail specification forprotective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating theIEC 60603-7
2009 CENELEC 0
3588 EN 60255-26 Measuring relays and protection equipment - Part 26: Electromagnetic compatibility requirements - Incorporatingcorrigendum October 2013
2009 CENELEC 0
3589 EN 62007-2 Semiconductor optoelectronic devices for fibre optic system applications - Part 2: Measuring methods 2009 CENELEC 03590 EN 81346-2 Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations -
Part 2: Classification of objects and codes for classes2009 CENELEC 0
3591 CLC/TR 50531 Alarm systems Terms and definitions 2009 CENELEC 03592 EN 50523-2 Household appliances interworking - Part 2: Data structures 2009 CENELEC 03593 EN 60947-7-1 Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors 2009 CENELEC 03594 CLC/TR 50481 Recommendations on filters for shielded enclosures 2009 CENELEC 03595 EN 60068-2-27 Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock 2009 CENELEC 03596 EN 60335-2-30 Household and similar electrical appliances - Safety - Part 2-30: Particular requirements for room heaters - Incorporates
Amendment A11: 2012; Incorporating corrigendum March 2010 and November 20142009 CENELEC 0
3597 EN 61290-10-1 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and opticalspectrum analyzer
2009 CENELEC 0
3598 EN 61935-1 Specification for the testing of balanced and coaxial information technology cabling - Part 1: Installed balanced cabling asspecified in the standards series EN 50173
2009 CENELEC 0
3599 EN 50085-2-4 Cable trunking systems and cable ducting systems for electrical installations - Part 2-4: Particular requirements for servicepoles and service posts
2009 CENELEC 0
3600 EN 60974-8 Arc welding equipment - Part 8: Gas consoles for welding and plasma cutting systems 2009 CENELEC 03601 EN 62386-208 Digital addressable lighting interface - Part 208: Particular requirements for control gear - Switching function (device type
7)2009 CENELEC 0
3602 EN 50194-1 Electrical apparatus for the detection of combustible gases in domestic premises - Part 1: Test methods and performancerequirements
2009 CENELEC 0
3603 EN 50468 Resistibility requirements to overvoltages and overcurrents due to lightning for equipment having telecommunication ports 2009 CENELEC 03604 EN 61280-4-1 Fibre optic communication subsystem test procedures - Part 4-1: Installed cable plant - Multimode attenuation
measurement2009 CENELEC 0
3605 EN 50483-6 Test requirements for low voltage aerial bundled cable accessories - Part 6: Environmental testing 2009 CENELEC 03606 EN 61000-4-2 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity
test2009 CENELEC 0
3607 EN 62148-16 Fibre optic active components and devices - Package and interface standards - Part 16: Transmitter and receivercomponents for use with LC connector interface
2009 CENELEC 0
3608 EN 62453-303-2
Field device tool (FDT) interface specification - Part 303- 2: Communication profile integration - IEC 61784 CP 3/4, CP3/5 and CP3/6 - Incorporates Amendment A1: 2017
2009 CENELEC 0
3609 EN 61606-2 Audio and audiovisual equipment - Digital audio parts - Basic measurement methods of audio characteristics - Part 2:Consumer use
2009 CENELEC 0
3610 EN 60966-2-3 Radio frequency and coaxial cable assemblies - Part 2-3: Detail specification for flexible coaxial cable assemblies -Frequency range 0 MHz to 1 000 MHz, IEC 61169-8 connectors
2009 CENELEC 0
3611 EN 61754-24-21
Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 24-21: Type SC-RJconnectors with protective housings based on IEC 61076-3-106, variant 06
2009 CENELEC 0
3612 EN 61300-2-34 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-34: Tests -Resistance to solvents and contaminating fluids of interconnecting components and closures
2009 CENELEC 0
3613 EN 61112 Live working - Electrical insulating blankets 2009 CENELEC 03614 CLC/TR 62453-
515Field device tool (FDT) interface specification - Part 515: Communication implementation for common object model - IEC61784 CPF 15
2009 CENELEC 0
3615 EN 61094-2 Electroacoustics - Measurement microphones - Part 2: Primary method for pressure calibration of laboratory standardmicrophones by the reciprocity technique
2009 CENELEC 0
3616 EN 50342-4 Lead-acid starter batteries - Part 4: Dimensions of batteries for heavy vehicles 2009 CENELEC 03617 EN 81346-1 Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations -
Part 1: Basic rules2009 CENELEC 0
3618 EN 50215 Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service 2009 CENELEC 03619 EN 61300-3-3 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-3:
Examinations and measurements - Active monitoring of changes in attenuation and return loss2009 CENELEC 0
3620 EN 61857-21 Electrical insulation systems - Procedures for thermal evaluation - Part 21: Specific requirements for general-purposemodels - Wire-wound applications
2009 CENELEC 0
3621 EN 62453-306 Field device tool (FDT) interface specification - Part 306: Communication profile integration - IEC 61784 CPF 6 2009 CENELEC 03622 EN 140401 Blank Detail Specification: Fixed low power film surface mount (SMD) resistors 2009 CENELEC 03623 EN 60068-2-14 Environmental testing - Part 2-14: Tests - Test N: Change of temperature 2009 CENELEC 03624 EN 62083 Medical electrical equipment - Requirements for the safety of radiotherapy treatment planning systems 2009 CENELEC 03625 EN 50483-5 Test requirements for low voltage aerial bundled cable accessories - Part 5: Electrical ageing test 2009 CENELEC 03626 EN 60297-3-
100Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part3-100: Basic dimensions of front panels, subracks, chassis, racks and cabinets
2009 CENELEC 0
3627 EN 60745-2-14 Hand-held motor-operated electric tools - Safety - Part 2-14: Particular requirements for planers - Incorporates AmendmentA2: 2010; Remains Current
2009 CENELEC 0
3628 EN 61029-1 Safety of transportable motor-operated electric tools - Part 1: General requirements - Incorporating Corrigendum December2009; Incorporates Amendment A11: 2010; Remains Current
2009 CENELEC 0
3629 EN 60601-2-19 Medical electrical equipment - Part 2-19: Particular requirements for the basic safety and essential performance of infantincubators - Incorporates Amendment A1: 2016
2009 CENELEC 0
3630 EN 60966-3 Radio frequency and coaxial cable assemblies - Part 3: Sectional specification for semi-flexible coaxial cable assemblies 2009 CENELEC 03631 EN 62271-100 High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers - Incorporates Amendment A2:
20172009 CENELEC 0
3632 EN 62137-1-5 Surface mounting technology - Environmental and endurance test methods for surface mount solder joints - Part 1-5:Mechanical shear fatigue test
2009 CENELEC 0
3633 EN 61300-2-1 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests -Vibration (sinusoidal)
2009 CENELEC 0
3634 EN 61869-1 Instrument transformers - Part 1: General requirements 2009 CENELEC 03635 EN 50513 Solar wafers - Data sheet and product information for crystalline silicon wafers for solar cell manufacturing 2009 CENELEC 03636 EN 61111 Live working - Electrical insulating matting 2009 CENELEC 0
3637 EN 60191-6 Mechanical standardization of semiconductor devices - Part 6: General rules for the preparation of outline drawings ofsurface mounted semiconductor device packages
2009 CENELEC 0
3638 EN 62223 Insulators - Glossary of terms and definitions 2009 CENELEC 03639 EN 61935-2-20 Testing of balanced communication cabling in accordance with series EN 50173 - Part 2-20: Patch cords and work area
cords - Blank detail specification for class D applications2009 CENELEC 0
3640 EN 62430 Environmentally conscious design for electrical and electronic products 2009 CENELEC 03641 EN 60851-3 Winding wires - Test methods - Part 3: Mechanical properties - Incorporates Amendment A1: 2013 2009 CENELEC 03642 EN 60966-2-1 Radio frequency and coaxial cable assemblies - Part 2-1: Sectional specification for flexible coaxial cable assemblies 2009 CENELEC 03643 EN 61249-4-17 Materials for printed boards and other interconnecting structures - Part 4-17: Sectional specification set for prepreg
materials, unclad (for the manufacture of multilayer boards) - Non-halogenated epoxide woven E-glass prepreg of definedflammability (ve
2009 CENELEC 0
3644 EN 61606-1 Audio and audiovisual equipment - Digital audio parts - Basic measurement methods of audio characteristics - Part 1:General
2009 CENELEC 0
3645 EN IEC 62453-303-1
Field device tool (FDT) interface specification Part 303-1: Communication profile integration â__ IEC 61784 CP 3/1 andCP 3/2 - Incorporates Amendment A1: 2018
2009 CENELEC 0
3646 EN 60282-1 High-voltage fuses - Part 1: Current-limiting fuses - Incorporates Amendment A1: 2014 2009 CENELEC 03647 CLC/TR 50484 Recommendations for shielded enclosures 2009 CENELEC 03648 EN 61935-3 Testing of balanced and coaxial information technology cabling - Part 3: Installed cabling as specified in EN 50173-4 and
related standards2009 CENELEC 0
3649 EN 60745-1 Hand-held motor-operated electric tools - Safety - Part 1: General requirements - Incorporating Corrigendum December2009; Incorporates Amendment A11: 2010; Remains Current
2009 CENELEC 0
3650 EN 62419 Control technology - Rules for the designation of measuring instruments 2009 CENELEC 03651 CLC/TS 61643-
12Low-voltage surge protective devices - Part 12: Surge protective devices connected to low-voltage power distributionsystems - Selection and application principles
2009 CENELEC 0
3652 EN 62137-1-3 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-3: Cyclicdrop test
2009 CENELEC 0
3653 EN 61770 Electric appliances connected to the water mains Avoidance of backsiphonage and failure of hose-sets - IncorporatesAmendment A11: 2018
2009 CENELEC 0
3654 EN 60745-2-4 Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other thandisk type - Incorporates Amendment A11: 2011; Remains Current
2009 CENELEC 0
3655 EN 62546 High Definiton (HD) recording link guidelines 2009 CENELEC 03656 EN 62480 Multimedia home network - Network interfaces for network adapter 2009 CENELEC 03657 EN 61249-4-16 Materials for printed boards and other interconnecting structures - Part 4-16: Sectional specification set for prepreg
materials, unclad (for the manufacture of multilayer boards) - Multifunctional non-halogenated epoxide woven E-glassprepreg of defined
2009 CENELEC 0
3658 EN 61822 Electrical installations for lighting and beaconing of aerodromes - Constant current regulators 2009 CENELEC 03659 EN 62295 Multimedia systems - Common communication protocol for inter-connectivity on heterogeneous networks 2009 CENELEC 03660 EN 60601-2-41 Medical electrical equipment - Part 2-41: Particular requirements for basic safety and essential performance of surgical
luminaires and luminaires for diagnosis - Incorporates Amendment A1: 20152009 CENELEC 0
3661 EN 62341-5 Organic Light Emitting Diode (OLED) displays - Part 5: Environmental testing methods 2009 CENELEC 03662 EN 61249-2-37 Materials for printed boards and other interconnecting structures - Part 2-37: Reinforced base materials, clad and unclad -
Modified non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lea
2009 CENELEC 0
3663 CLC/TR 50506-2
Railway applications - Communication, signalling and processing systems - Application Guide for EN 50129 - Part 2:Safety assurance
2009 CENELEC 0
3664 EN 60601-2-50 Medical electrical equipment - Part 2-50: Particular requirements for the basic safety and essential performance of infantphototherapy equipment - Incorporates Amendment A1: 2016
2009 CENELEC 0
3665 EN 50512 Electrical installations for lighting and beaconing of aerodromes - Advanced Visual Docking Guidance Systems (A-VDGS) 2009 CENELEC 03666 EN 60269-4 Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices -
Incorporates Amendment A2: 20162009 CENELEC 0
3667 EN 50411-2-8 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-8:Microduct connectors, for air blown optical fibres, Type 1
2009 CENELEC 0
3668 EN 61755-3-2 Fibre optic connector optical interfaces - Part 3-2: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconiaferrules for 8 degrees angled-PC single mode fibres
2009 CENELEC 0
3669 EN 61558-2-13 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-13:Particular requirements and tests for auto transformers and power supply units incorporating auto transformers
2009 CENELEC 0
3670 EN 61857-1 Electrical insulation systems - Procedures for thermal evaluation - Part 1: General requirements - Low-voltage 2009 CENELEC 03671 EN 61850-7-
420Communication networks and systems for power utility automation - Part 7-420: Basic communication structure -Distributed energy resources logical nodes
2009 CENELEC 0
3672 EN 60745-2-20 Hand-held motor-operated electric tools - Safety - Part 2-20: Particular requirements for band saws 2009 CENELEC 03673 EN 60255-151 Measuring relays and protection equipment - Part 151: Functional requirements for over/under current protection 2009 CENELEC 03674 EN 62386-204 Digital addressable lighting interface - Part 204: Particular requirements for control gear - Low voltage halogen lamps
(device type 3)2009 CENELEC 0
3675 EN 50483-3 Test requirements for low voltage aerial bundled cable accessories - Part 3: Tension and suspension clamps for neutralmessenger system
2009 CENELEC 0
3676 EN 61755-3-8 Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-8: Opticalinterface, 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-APC composite ferrule using titanium as fibresurrounding materia
2009 CENELEC 0
3677 EN 80601-2-59 Medical electrical equipment - Part 2-59: Particular requirements for the basic safety and essential performance ofscreening thermographs for human febrile temperature screening
2009 CENELEC 0
3678 EN 62192 Live working - Insulating ropes 2009 CENELEC 03679 EN 50483-2 Test requirements for low voltage aerial bundled cable accessories - Part 2: Tension and suspension clamps for self
supporting system2009 CENELEC 0
3680 EN 60601-2-44 Medical electrical equipment - Part 2-44: Particular requirements for the basic safety and essential performance of X-rayequipment for computed tomography - Incorporates Amendment A2: 2016
2009 CENELEC 0
3681 EN 61076-3-114
Connectors for electronic equipment - Product requirements - Part 3-114: Rectangular connectors - Detail specification forprotective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrialenvironments
2009 CENELEC 0
3682 EN 61558-2-16 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-16:Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units- Incorporate
2009 CENELEC 0
3683 EN 61249-4-15 Materials for printed boards and other interconnecting structures - Part 4-15: Sectional specification set for prepregmaterials, unclad (for the manufacture of multilayer boards) - Multifunctional epoxide woven E-glass prepreg of definedflammability (ve
2009 CENELEC 0
3684 EN 61020-1 Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification 2009 CENELEC 03685 EN 61300-3-34 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-34:
Examinations and measurements - Attenuation of random mated connectors2009 CENELEC 0
3686 EN 60196 IEC standard frequencies 2009 CENELEC 03687 EN 60034-22 Rotating electrical machines - Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating
sets2009 CENELEC 0
3688 EN 61883-1 Consumer audio/video equipment - Digital interface - Part 1: General 2009 CENELEC 03689 EN 61557-11 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring
or monitoring of protective measures - Part 11: Effectiveness of residual current monitors (RCMs) type A and type B in TT,TN and
2009 CENELEC 0
3690 EN 62365 Digital audio - Digital input-output interfacing - Transmission of digital audio over asynchronous transfer mode (ATM)networks
2009 CENELEC 0
3691 EN 50520 Cover plates and cover tapes for the protection and location warning of buried cables or buried conduits in undergroundinstallations
2009 CENELEC 0
3692 EN 80416-1 Basic principles for graphical symbols for use on equipment - Part 1: Creation of graphical symbols for registration 2009 CENELEC 03693 EN 62386-205 Digital addressable lighting interface - Part 205: Particular requirements for control gear - Supply voltage controller for
incandescent lamps (device type 4)2009 CENELEC 0
3694 EN 61280-2-9 Fibre optic communication subsystem test procedures - Part 2-9: Digital systems - Optical signal-to-noise ratiomeasurement for dense wavelength-division multiplexed systems
2009 CENELEC 0
3695 EN 62453-301 Field device tool (FDT) interface specification - Part 301: Communication profile integration - IEC 61784 CPF 1 -Incorporates Amendment A1: 2017
2009 CENELEC 0
3696 EN 61300-3-6 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6:Examinations and measurements - Return loss
2009 CENELEC 0
3697 EN 50090-3-3 Home and Building Electronic Systems (HBES) - Part 3-3: Aspects of application - HBES Interworking model andcommon HBES data types
2009 CENELEC 0
3698 EN 62516-1 Terrestrial digital multimedia broadcasting (T-DMB) receivers - Part 1: Basic requirement 2009 CENELEC 03699 EN 60745-2-12 Hand-held motor-operated electric tools - Safety - Part 2-12: Particular requirements for concrete vibrators 2009 CENELEC 03700 EN 61755-3-7 Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-7: Optical
interface, 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using titanium as fibre surrounding material,single mode fib
2009 CENELEC 0
3701 EN 62369-1 Evaluation of human exposure to electromagnetic fields from short range devices (SRDs) in various applications over thefrequency range 0 GHz to 300 GHz - Part 1: Fields produced by devices used for electronic article surveillance, radiofrequency identif
2009 CENELEC 0
3702 EN 61300-3-43 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-43:Examinations and measurements - Mode transfer function measurement for fibre optic sources
2009 CENELEC 0
3703 EN 60644 Specification for high-voltage fuse-links for motor circuit application 2009 CENELEC 03704 EN 61754-15 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 15: Type LSH
connector family2009 CENELEC 0
3705 EN 62004 Thermal-resistant aluminium alloy wire for overhead line conductor 2009 CENELEC 03706 EN 61558-2-4 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-4:
Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers2009 CENELEC 0
3707 EN 62321 Electrotechnical products - Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalentchromium, polybrominated biphenyls, polybrominated diphenyl ethers) - Remains Current
2009 CENELEC 0
3708 EN 60068-2-38 Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test 2009 CENELEC 03709 EN 60034-15 Rotating electrical machines - Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c.
machines2009 CENELEC 0
3710 EN 50177 Stationary electrostatic application equipment for ignitable coating powders - Safety requirements - IncorporatesAmendment A1: 2012
2009 CENELEC 0
3711 EN 50483-4 Test requirements for low voltage aerial bundled cable accessories - Part 4: Connectors 2009 CENELEC 03712 EN 60297-3-
105Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part3-105: Dimensions and design aspects for 1U high chassis
2009 CENELEC 0
3713 EN 61000-4-6 Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducteddisturbances, induced by radio-frequency fields
2009 CENELEC 0
3714 EN 61310-2 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking 2008 CENELEC 03715 EN 61298-2 Process measurement and control devices - General methods and procedures for evaluating performance - Part 2: Tests
under reference conditions2008 CENELEC 0
3716 EN 61158-6-16 Industrial communication networks - Fieldbus specifications - Part 6-16: Application layer protocol specification - Type 16elements
2008 CENELEC 0
3717 EN 50264-2-2 Railway applications - Railway rolling stock power and control cables having special fire performance - Part 2-2: Cableswith crosslinked elastomeric insulation - Multicore cables
2008 CENELEC 0
3718 EN 60738-1-4 Thermistors - Directly heated positive step-function temperature coefficient - Part 1-4: Blank detail specification - Sensingapplication - Assessment level EZ
2008 CENELEC 0
3719 EN 60512-15-5 Connectors for electronic equipment - Tests and measurements - Part 15-5: Connector tests (mechanical) - Test 15e:Contact retention in insert, cable nutation
2008 CENELEC 0
3720 EN 60601-1-9 Medical electrical equipment - Part 1-9: General requirements for basic safety and essential performance - CollateralStandard: Requirements for environmentally conscious design - Incorporates Amendment A1: 2013
2008 CENELEC 0
3721 EN 61158-3-11 Industrial communication networks - Fieldbus specifications - Part 3-11: Data-link layer service definition - Type 11elements
2008 CENELEC 0
3722 EN 60335-2-54 Household and similar electrical appliances - Safety - Part 2-54: Particular requirements for surface-cleaning appliances forhousehold use employing liquids or steam - Incorporating corrigendum January 2015; Incorporates Amendment A1: 2015
2008 CENELEC 0
3723 EN 60068-2-64 Environmental testing Part 2: Test methods Test Fh: Vibration, broad-band random (digital control) and guidance 2008 CENELEC 03724 EN 140101 Blank Detail Specification: Fixed low power film resistors 2008 CENELEC 03725 CLC/TS 50457-
2Conductive charging for electric vehicles - Part 2: Communication protocol between off-board charger and electric vehicle 2008 CENELEC 0
3726 EN 60794-2-42 Optical fibre cables - Part 2-42: Indoor optical fibre cables - Product specification for simplex and duplex cables with A4fibres
2008 CENELEC 0
3727 EN 61290-3 Optical amplifiers - Test methods - Part 3: Noise figure parameters 2008 CENELEC 03728 EN 61915-1 Low-voltage switchgear and controlgear - Device profiles for networked industrial devices - Part 1: General rules for the
development of device profiles2008 CENELEC 0
3729 EN 60512-15-3 Connectors for electronic equipment - Tests and measurements - Part 15-3: Connector tests (mechanical) - Test 15c: Insertretention in housing (torsional)
2008 CENELEC 0
3730 EN 50521 Connectors for photovoltaic systems - Safety requirements and tests - Incorporates Amendment A1: 2012 2008 CENELEC 03731 EN 62227 Multimedia home server systems - Digital rights permission code - Incorporates Amendment A1: 2013 2008 CENELEC 03732 EN 61300-2-44 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests -
Flexing of the strain relief of fibre optic devices2008 CENELEC 0
3733 EN 60512-16-18
Connectors for electronic equipment - Tests and measurements - Part 16-18: Mechanical tests on contacts and terminations- Test 16r: Deflection of contacts, simulation
2008 CENELEC 0
3734 EN 61189-3 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3: Testmethods for interconnection structures (printed boards)
2008 CENELEC 0
3735 EN 61158-6-11 Industrial communication networks - Fieldbus specifications - Part 6-11: Application layer protocol specification - Type 11elements
2008 CENELEC 0
3736 EN 61606-3 Audio and audiovisual equipment - Digital audio parts - Basic measurement methods of audio characteristics - Part 3:Professional use
2008 CENELEC 0
3737 EN 62233 Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to humanexposure - Incorporating corrigendum August 2008
2008 CENELEC 0
3738 EN 61158-4-7 Industrial communication networks - Fieldbus specifications - Part 4-7: Data-link layer protocol specification - Type 7elements
2008 CENELEC 0
3739 EN 60512-16-7 Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations -Test 16g: Measurement of contact deformation after crimping
2008 CENELEC 0
3740 EN 60730-2-11 Automatic electrical controls for household and similar use - Part 2-11: Particular requirements for energy regulators 2008 CENELEC 03741 EN 62457 Multimedia home networks - Home network communication protocol over IP for multimedia household appliances 2008 CENELEC 03742 EN 61753-021-
2Fibre optic interconnecting devices and passive components performance standard - Part 021-2: Grade C/3 single-modefibre optic connectors for category C - Controlled environment
2008 CENELEC 0
3743 CLC/TR 50378-2-2
Passive components to be used in optical fibre communication systems - Product specifications - Part 2-2: SC(SC2)-APCconnector-type fixed optical attenuators using IEC 60793-2 Category B1.1 singlemode fibre
2008 CENELEC 0
3744 EN 50382-2 Railway applications - Railway rolling stock high temperature power cables having special fire performance - Part 2: Singlecore silicone rubber insulated cables for 120 آ°C or 150 آ°C - Incorporates Amendment A1: 2013
2008 CENELEC 0
3745 EN 62059-31-1 Electricity metering equipment - Dependability - Part 31-1: Accelerated reliability testing - Elevated temperature andhumidity
2008 CENELEC 0
3746 EN 60794-3-50 Optical fibre cables - Part 3-50: Outdoor cables - Family specification for gas pipe cables and subducts for installation byblowing and/or pulling/dragging in gas pipes
2008 CENELEC 0
3747 EN 60512-16-8 Connectors for electronic equipment - Tests and measurements - Part 16-8: Mechanical tests on connections andterminations - Test 16h: Insulating grip effectiveness (crimped connections)
2008 CENELEC 0
3748 EN 60751 Industrial platinum resistance thermometers and platinum temperature sensors 2008 CENELEC 03749 EN 61298-1 Process measurement and control devices - General methods and procedures for evaluating performance - Part 1: General
considerations2008 CENELEC 0
3750 EN 61649 Weibull analysis 2008 CENELEC 03751 EN 62431 Reflectivity of electromagnetic wave absorbers in millimetre wave frequency - Measurement methods 2008 CENELEC 03752 EN 61753-021-
6Fibre optic interconnecting devices and passive components performance standard - Part 021-6: Grade B/2 single-modefibre optic connectors for category O - Uncontrolled environment
2008 CENELEC 0
3753 EN 61386-1 Conduit systems for cable management - Part 1: General requirements 2008 CENELEC 03754 EN 60512-26-
100Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and referencearrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g - Incorporates AmendmentA1: 2011
2008 CENELEC 0
3755 EN 60601-2-39 Medical electrical equipment - Part 2-39: Particular requirements for basic safety and essential performance of peritonealdialysis equipment - Incorporates Amendment A11: 2011
2008 CENELEC 0
3756 EN 62460 Temperature - Electromotive force (EMF) tables for pure-element thermocouple combinations 2008 CENELEC 03757 EN 50264-2-1 Railway applications - Railway rolling stock power and control cables having special fire performance - Part 2-1: Cables
with crosslinked elastomeric insulation - Single core cables2008 CENELEC 0
3758 EN 50410 Household and similar electrical appliances - Safety - Particular requirements for decorative robots 2008 CENELEC 03759 CLC/TR 62125 Environmental statement specific to TC 20 - Electric cables 2008 CENELEC 03760 EN 60512-15-4 Connectors for electronic equipment - Tests and measurements - Part 15-4: Connector tests (mechanical) - Test 15d:
Contact insertion, release and extraction force2008 CENELEC 0
3761 EN 60670-23 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 23: Particularrequirements for floor boxes and enclosures
2008 CENELEC 0
3762 CLC/TS 50457-1
Conductive charging for electric vehicles - Part 1: D.C. charging station 2008 CENELEC 0
3763 EN 62428 Electric power engineering - Modal components in three-phase a.c. systems - Quantities and transformations 2008 CENELEC 03764 EN 61753-101-
3Fibre optic interconnecting devices and passive components performance standard - Part 101-3: Fibre management systemsfor Category U - Uncontrolled environment
2008 CENELEC 0
3765 EN 60229 Electric cables - Tests on extruded oversheaths with a special protective function 2008 CENELEC 03766 EN 60335-2-62 Household and similar electrical appliances Safety Part 2-62: Particular requirements for commercial electric rinsing sinks -
Incorporating Corrigendum August 2007; Incorporates Amendment A1: 20082008 CENELEC 0
3767 EN 50475 Basic standard for the calculation and the measurement of human exposure to electromagnetic fields from broadcastingservice transmitters in the HF bands (3 MHz - 30 MHz)
2008 CENELEC 0
3768 EN 61158-4-16 Industrial communication networks - Fieldbus specifications - Part 4-16: Data-link layer protocol specification - Type 16elements
2008 CENELEC 0
3769 EN 62420 Concentric lay stranded overhead electrical conductors containing one or more gap(s) 2008 CENELEC 03770 EN 60512-16-
14Connectors for electronic equipment - Tests and measurements - Part 16-14: Mechanical tests on contacts and terminations- Test 16n: Bending strength, fixed male tabs
2008 CENELEC 0
3771 EN 50164-7 Lightning Protection Components (LPC) - Part 7: Requirements for earthing enhancing compounds - Remains Current 2008 CENELEC 03772 EN 60512-16-9 Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations -
Test 16i: Grounding contact spring holding force2008 CENELEC 0
3773 EN 60794-3-60 Optical fibre cables - Part 3-60: Outdoor cables - Family specification for drinking water pipe cables and subducts forinstallation by blowing and/or pulling/dragging/floating in drinking water pipes
2008 CENELEC 0
3774 EN 62310-3 Static transfer systems (STS) - Part 3: Method for specifying performance and test requirements 2008 CENELEC 03775 EN 60749-37 Semiconductor devices - Mechanical and climatic test methods - Part 37: Board level drop test method using an
accelerometer2008 CENELEC 0
3776 EN 50377-3-1 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -Part 3-1: Type SG terminated on IEC 60793-2-10 category A1a, A1b or equivalent multimode fibre for category C
2008 CENELEC 0
3777 EN 61076-3-001
Connectors for electronic equipment - Product requirements - Part 3-001: Rectangular connectors - Blank detailspecification
2008 CENELEC 0
3778 EN 60512-16-11
Connectors for electronic equipment - Tests and measurements - Part 16-11: Mechanical tests on contacts and terminations- Test 16k: Stripping force, solderless wrapped connections
2008 CENELEC 0
3779 EN 60512-25-9 Connectors for electronic equipment - Tests and measurements - Part 25-9: Signal integrity tests - Test 25i: Alien crosstalk 2008 CENELEC 03780 EN 50131-2-4 Alarm systems - Intrusion and hold-up systems - Part 2-4: Requirements for combined passive infrared and microwave
detectors2008 CENELEC 0
3781 EN 60512-16-16
Connectors for electronic equipment - Tests and measurements - Part 16-16: Mechanical tests on contacts and terminations- Test 16p: Torsional strength, fixed male tabs
2008 CENELEC 0
3782 EN 60216-5 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index(RTE) of an insulating material
2008 CENELEC 0
3783 EN 60626-3 Combined flexible materials for electrical insulation - Part 3: Specifications for individual materials - IncorporatesAmendment A1: 2012
2008 CENELEC 0
3784 EN 61646 Thin-film terrestrial photovoltaic (PV) modules - Design qualification and type approval - Remains Current 2008 CENELEC 03785 EN 50411-2 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2: General
and guidance for optical fibre cable joint closures, protected microduct closures, and microduct connectors2008 CENELEC 0
3786 EN 60794-2-40 Optical fibre cables - Part 2-40: Indoor optical fibre cables - Family specification for A4 fibre cables 2008 CENELEC 03787 EN 60519-7 Safety in electroheat installations - Part 7: Particular requirements for installations with electron guns 2008 CENELEC 03788 EN 61298-3 Process measurement and control devices - General methods and procedures for evaluating performance - Part 3: Tests for
the effects of influence quantities2008 CENELEC 0
3789 EN 60384-11 Fixed capacitors for use in electronic equipment - Part 11: Sectional specification - Fixed polyethylene-terephthalate filmdielectric metal foil d.c. capacitors
2008 CENELEC 0
3790 EN 50264-3-1 Railway applications - Railway rolling stock power and control cables having special fire performance - Part 3-1: Cableswith crosslinked elastomeric insulation with reduced dimensions - Single core cables
2008 CENELEC 0
3791 EN 61158-3-18 Industrial communication networks - Fieldbus specifications - Part 3-18: Data-link layer service definition - Type 18elements
2008 CENELEC 0
3792 EN 61310-3 Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators 2008 CENELEC 03793 EN 61834-11 Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60,
625-50, 1125-60 and 1250-50 systems) - Part 11: HDV format for 1080i and 720p systems2008 CENELEC 0
3794 EN 60738-1-1 Thermistors - Directly heated positive step-function temperature coefficient - Part 1-1: Blank detail specification - Currentlimiting application - Assessment level EZ
2008 CENELEC 0
3795 EN 62491 Industrial systems, installations and equipment and industrial products - Labelling of cables and cores 2008 CENELEC 03796 EN 61290-3-2 Optical amplifiers - Test methods - Part 3-2: Noise figure parameters - Electrical spectrum analyzer method 2008 CENELEC 03797 EN 60512-15-6 Connectors for electronic equipment - Tests and measurements - Part 15-6: Connector tests (mechanical) - Test 15f:
Effectiveness of connector coupling devices2008 CENELEC 0
3798 EN 50131-2-6 Alarm systems - Intrusion and hold-up systems - Part 2-6: Opening contacts (magnetic) 2008 CENELEC 0
3799 EN 61968-13 Application integration at electric utilities - System interfaces for distribution management - Part 13: CIM RDF Modelexchange format for distribution
2008 CENELEC 0
3800 EN 50377-11-1 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -Part 11-1: Type MF terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre for category C
2008 CENELEC 0
3801 EN 50382-1 Railway applications - Railway rolling stock high temperature power cables having special fire performance - Part 1:General requirements - Incorporates Amendment A1: 2013
2008 CENELEC 0
3802 EN 61318 Live working - Conformity assessment applicable to tools, devices and equipment 2008 CENELEC 03803 EN 60512-16-
17Connectors for electronic equipment - Tests and measurements - Part 16-17: Mechanical tests on contacts and terminations- Test 16q: Tensile and compressive strength, fixed male tabs
2008 CENELEC 0
3804 EN 60728-4 Cable networks for television signals, sound signals and interactive services - Part 4: Passive wideband equipment forcoaxial cable networks
2008 CENELEC 0
3805 EN 61290-11-1 Optical amplifiers - Test methods - Part 11-1: Polarization mode dispersion parameter - Jones matrix eigenanalysis (JME) 2008 CENELEC 03806 EN 60601-1-3 Medical electrical equipment - Part 1-3: General requirements for basic safety and essential performance - Collateral
Standard: Radiation protection in diagnostic X-ray equipment - Incorporating corrigenda March 2010 and May 2014;Incorporates Amendment A
2008 CENELEC 0
3807 EN 61158-5-7 Industrial communication networks - Fieldbus specifications - Part 5-7: Application layer service definition - Type 7elements
2008 CENELEC 0
3808 CLC/TS 62271-304
High-voltage switchgear and controlgear - Part 304: Design classes for indoor enclosed switchgear and controlgear forrated voltages above 1 kV up to and including 52 kV to be used in severe climatic conditions
2008 CENELEC 0
3809 EN 60255-22-1 Measuring relays and protection equipment - Part 22-1: Electrical disturbance tests - 1 MHz burst immunity tests 2008 CENELEC 03810 EN 61298-4 Process measurement and control devices - General methods and procedures for evaluating performance - Part 4:
Evaluation report content2008 CENELEC 0
3811 EN 61249-4-1 Materials for printed boards and other interconnecting structures - Part 4-1: Sectional specification set for prepregmaterials, unclad (for the manufacture of multilayer boards) - Epoxide woven E-glass prepreg of defined flammability
2008 CENELEC 0
3812 EN 50264-3-2 Railway applications - Railway rolling stock power and control cables having special fire performance - Part 3-2: Cableswith crosslinked elastomeric insulation with reduced dimensions - Multicore cables
2008 CENELEC 0
3813 CLC/TR 50456 Guidelines to achieving compliance with EC directives for alarm systems 2008 CENELEC 03814 EN 61753-062-
6Fibre optic interconnecting devices and passive components performance standard - Part 062-6: Non-connectorized single-mode fibre optic pigtailed isolators for category O - Uncontrolled environment and sequential test
2008 CENELEC 0
3815 EN 60738-1-2 Thermistors - Directly heated positive step-function temperature coefficient - Part 1-2: Blank detail specification - Heatingelement application - Assessment level EZ
2008 CENELEC 0
3816 EN 60512-15-7 Connectors for electronic equipment - Tests and measurements - Part 15-7: Connector tests (mechanical) - Test 15g:Robustness of protective cover attachment
2008 CENELEC 0
3817 EN 50342-3 Lead-acid starter batteries - Part 3: Terminal system for batteries with 36 V nominal voltage 2008 CENELEC 03818 EN 62429 Reliability growth - Stress testing for early failures in unique complex systems 2008 CENELEC 03819 EN 61051-1 Varistors for use in electronic equipement - Part 1: Generic specification 2008 CENELEC 03820 EN 80000-6 Quantities and units - Part 6: Electromagnetism 2008 CENELEC 03821 EN 60601-2-31 Medical electrical equipment - Part 2-31: Particular requirements for the basic safety and essential performance of external
cardiac pacemakers with internal power source - Incorporates Amendment A1: 20112008 CENELEC 0
3822 CLC/TR 50126-3
Railway applications The specification and demonstration of Reliability, Availability, Maintainability and Safety (RAMS)Part 3: Guide to the application of EN 50126-1 for rolling stock RAM
2008 CENELEC 0
3823 EN 61291-6-1 Opticial amplifiers - Part 6-1: Interfaces - Command set 2008 CENELEC 03824 CLC/TS 60034-
25Rotating electrical machines - Part 25: Guidance for the design and performance of a.c. motors specifically designed forconverter supply
2008 CENELEC 0
3825 EN 61158-3-8 Industrial communication networks - Fieldbus specifications - Part 3-8: Data-link layer service definition - Type 8 elements 2008 CENELEC 03826 EN 60601-2-37 Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of
ultrasonic medical diagnostic and monitoring equipment - Incorporates Amendment A1: 20152008 CENELEC 0
3827 EN 60255-22-2 Measuring relays and protection equipment - Part 22-2: Electrical disturbance tests - Electrostatic discharge tests 2008 CENELEC 03828 EN 50444 Basic standard for the evaluation of human exposure to electromagnetic fields from equipment for arc welding and allied
processes2008 CENELEC 0
3829 EN 60641-1 Specification for pressboard and presspaper for electrical purposes - Part 1: Definitions and general requirements 2008 CENELEC 03830 EN 61158-3-7 Industrial communication networks - Fieldbus specifications - Part 3-7: Data-link layer service definition - Type 7 elements 2008 CENELEC 03831 EN 61158-5-16 Industrial communication networks - Fieldbus specifications - Part 5-16: Application layer service definition - Type 16
elements2008 CENELEC 0
3832 EN 50131-2-5 Alarm systems - Intrusion and hold-up systems - Part 2-5: Requirements for combined passive infrared and ultrasonicdetectors
2008 CENELEC 0
3833 EN 61158-4-8 Industrial communication networks - Fieldbus specifications - Part 4-8: Data-link layer protocol specification - Type 8elements
2008 CENELEC 0
3834 EN 60204-32 Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines 2008 CENELEC 03835 EN 61512-3 Batch control - Part 3: General and site recipe models and representation 2008 CENELEC 03836 EN 50499 Procedure for the assessment of the exposure of workers to electromagnetic fields 2008 CENELEC 03837 EN 61158-5-8 Industrial communication networks - Fieldbus specifications - Part 5-8: Application layer service definition - Type 8
elements2008 CENELEC 0
3838 EN 62494-1 Medical electrical equipment - Exposure index of digital X-ray imaging systems - Part 1: Definitions and requirements forgeneral radiography
2008 CENELEC 0
3839 EN 60300-3-16 Dependability management - Part 3-16: Application guide - Guidelines for specification of maintenance support services 2008 CENELEC 03840 EN 60584-3 Thermocouples - Part 3: Extension and compensating cables - Tolerances and identification system 2008 CENELEC 03841 EN 60384-11-1 Fixed capacitors for use in electronic equipment - Part 11-1: Blank detail specification - Fixed polyethylene-terephthalate
film dielectric metal foil d.c. capacitors - Assessment level EZ2008 CENELEC 0
3842 EN 61228 Fluorescent ultraviolet lamps used for tanning - Measurement and specification method 2008 CENELEC 03843 EN 60749-38 Semiconductor devices - Mechanical and climatic test methods - Part 38: Soft error test method for semiconductor devices
with memory2008 CENELEC 0
3844 EN 61753-083-2
Fibre optic interconnecting devices and passive components performance standard - Part 083-2: Non-connectorised single-mode fibre optic C-band/L-band WDM devices for category C - Controlled environment
2008 CENELEC 0
3845 EN 61400-25-4 Wind turbines - Part 25-4: Communications for monitoring and control of wind power plants - Mapping to communicationprofile
2008 CENELEC 0
3846 EN 50486 Equipment for use in audio and video door-entry systems 2008 CENELEC 03847 EN 61355-1 Classification and designation of documents for plants, systems and equipment - Part 1: Rules and classification tables 2008 CENELEC 03848 EN 61310-1 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals 2008 CENELEC 03849 EN 60085 Electrical insulation - Thermal evaluation and designation 2008 CENELEC 03850 EN 61109 Insulators for overhead lines - Composite suspension and tension insulators for a.c. systems with a nominal voltage greater
than 1 000 V - Definitions, test methods and acceptance criteria2008 CENELEC 0
3851 EN 60738-1-3 Thermistors - Directly heated positive step-function temperature coefficient - Part 1-3: Blank detail specification - Inrushcurrent application - Assessment level EZ
2008 CENELEC 0
3852 EN 61758-1 Fibre optic interconnecting devices and passive components - Interface standard for closures - Part 1: General and guidance 2008 CENELEC 03853 EN 61158-5-17 Industrial communication networks - Fieldbus specifications - Part 5-17: Application layer service definition - Type 17
elements2008 CENELEC 0
3854 EN 60255-22-4 Measuring relays and protection equipment - Part 22-4: Electrical disturbance tests - Electrical fast transient/burst immunitytest
2008 CENELEC 0
3855 EN 62002-2 Mobile and portable DVB-T/H radio access - Part 2: Interface conformance testing 2008 CENELEC 03856 EN 62317-14 Ferrite cores - Dimensions - Part 14: EFD-cores for use in power supply applications 2008 CENELEC 03857 EN 60512-16-5 Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations -
Test 16e: Gauge retention force (resilient contacts)2008 CENELEC 0
3858 EN 61188-5-8 Printed boards and printed board assemblies - Design and use - Part 5-8: Attachment (land/joint) considerations - Areaarray components (BGA, FBGA, CGA, LGA)
2008 CENELEC 0
3859 EN 60318-6 Electroacoustics - Simulators of human head and ear - Part 6: Mechanical coupler for the measurement of bone vibrators 2008 CENELEC 03860 EN 61076-3 Connectors for electronic equipment - Product requirements - Part 3: Rectangular connectors - Sectional specification 2008 CENELEC 03861 EN 60254-2 Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells 2008 CENELEC 03862 EN 61557-12 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring
or monitoring of protective measures - Part 12: Performance measuring and monitoring devices (PMD)2008 CENELEC 0
3863 EN 60076-6 Power transformers - Part 6: Reactors 2008 CENELEC 03864 EN 61753-084-
2Fibre optic interconnecting devices and passive components performance standard - Part 084-2: Non connectorised single-mode 980/1550 nm WWDM devices for category C - Controlled environment
2008 CENELEC 0
3865 EN 61300-3-42 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-42:Examinations and measurements - Attenuation of single mode alignment sleeves and or adaptors with resilient alignmentsleeves
2008 CENELEC 0
3866 EN 60958-4 Digital audio interface Part 4: Professional applications (TA4) - Incorporates Amendment A1: 2008 2008 CENELEC 03867 EN 50289-4-4 Communication cables - Specifications for test methods - Part 4-4: Environmental test methods - Resistance to solvents and
contaminating fluids2008 CENELEC 0
3868 EN 62271-205 High-voltage switchgear and controlgear - Part 205: Compact switchgear assemblies for rated voltages above 52 kV 2008 CENELEC 03869 EN 60079-27 Explosive atmospheres - Part 27: Fieldbus intrinsically safe concept (FISCO) - Remains Current 2008 CENELEC 03870 EN 60904-3 Photovoltaic devices - Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral
irradiance data2008 CENELEC 0
3871 EN 50106 Safety of household and similar electrical appliances - Particular rules for routine tests referring to appliances under thescope of EN 60335-1
2008 CENELEC 0
3872 EN 60068-2-31 Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens 2008 CENELEC 03873 EN 61162-3 Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 3: Serial data instrument
network - Incorporates Amendment A1: 20142008 CENELEC 0
3874 EN 61039 Classification of insulating liquids 2008 CENELEC 03875 EN 60512-16-1 Connectors for electronic equipment - Tests and measurements - Part 16-1: Mechanical tests on contacts and terminations -
Test 16a: Probe damage2008 CENELEC 0
3876 EN 61857-22 Electrical insulation systems - Procedures for thermal evaluation - Part 22: Specific requirements for encapsulated-coilmodel - Wire-wound electrical insulation system (EIS)
2008 CENELEC 0
3877 EN 61467 Insulators for overhead lines - Insulator strings and sets for lines with a nominal voltage greater than 1 000 V - AC powerarc tests
2008 CENELEC 0
3878 EN 61966-2-5 Multimedia systems and equipment - Colour measurement and management - Part 2-5: Colour management - OptionalRGB colour space - opRGB
2008 CENELEC 0
3879 EN 62031 LED modules for general lighting - Safety specifications - Incorporates Amendment A2: 2015 2008 CENELEC 03880 EN 45502-2-2 Active implantable medical devices - Part 2-2: Particular requirements for active implantable medical devices intended to
treat tachyarrhythmia (includes implantable defibrillators) - Incorporating corrigendum April 20092008 CENELEC 0
3881 EN 62002-1 Mobile and portable DVB-T/H radio access - Part 1: Interface specification 2008 CENELEC 03882 EN 50490 Electrical installations for lighting and beaconing of aerodromes - Technical requirements for aeronautical ground lighting
control and monitoring systems - Units for selective switching and monitoring of individual lamps2008 CENELEC 0
3883 EN 61158-6-17 Industrial communication networks - Fieldbus specifications - Part 6-17: Application layer protocol specification - Type 17elements
2008 CENELEC 0
3884 EN 61158-6-8 Industrial communication networks - Fieldbus specifications - Part 6-8: Application layer protocol specification - Type 8elements
2008 CENELEC 0
3885 EN 60300-3-4 Dependability management - Part 3-4: Application guide - Guide to the specification of dependability requirements 2008 CENELEC 03886 EN 61400-21 Wind turbines - Part 21: Measurement and assessment of power quality characteristics of grid connected wind turbines 2008 CENELEC 0
3887 EN 60641-3-2 Pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirementsfor presspaper, types P.2.1, P.4.1, P.4.2, P.4.3 and P.6.1
2008 CENELEC 0
3888 EN 60335-2-108
Household and similar electrical appliances - Safety - Part 2-108: Particular requirements for electrolysers 2008 CENELEC 0
3889 EN 50504 Validation of arc welding equipment 2008 CENELEC 03890 EN 50131-2-3 Alarm systems - Intrusion and hold-up systems - Part 2-3: Requirements for microwave detectors 2008 CENELEC 03891 CLC/TS 61496-
3Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for Active Opto-electronicProtective Devices responsive to Diffuse Reflection (AOPDDR)
2008 CENELEC 0
3892 EN 60255-22-3 Measuring relays and protection equipment - Part 22-3: Electrical disturbance tests - Radiated electromagnetic fieldimmunity
2008 CENELEC 0
3893 EN 61223-3-2 Evaluation and routine testing in medical imaging departments - Part 3-2: Acceptance tests - Imaging performance ofmammographic X-ray equipment
2008 CENELEC 0
3894 CLC/TR 50455 List of interpretations on the EN 60730 series "Automatic electrical controls for household and similar use" 2008 CENELEC 03895 EN 50500 Measurement procedures of magnetic field levels generated by electronic and electrical apparatus in the railway
environment with respect to human exposure - Incorporates Amendment A1: 20152008 CENELEC 0
3896 EN 60068-2-20 Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of deviceswith leads
2008 CENELEC 0
3897 EN 61952 Insulators for overhead lines - Composite line post insulators for A.C. systems with a nominal voltage greater than 1 000 V- Definitions, test methods and acceptance criteria
2008 CENELEC 0
3898 EN 60512-16-2 Connectors for electronic equipment - Tests and measurements - Part 16-2: Mechanical tests on contacts and terminations -Test 16b: Restricted entry
2008 CENELEC 0
3899 EN 60794-2-50 Optical fibre cables - Part 2-50: Indoor cables - Family specification for simplex and duplex cables for use in terminatedcable assemblies
2008 CENELEC 0
3900 EN 50289-4-5 Communication cables - Specifications for test methods - Part 4-5: Environmental test methods - Climatic sequence 2008 CENELEC 03901 EN 60794-2-41 Optical fibre cables - Part 2-41: Indoor cables - Product specification for simplex and duplex buffered A4 fibres 2008 CENELEC 03902 EN 60068-2-6 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) 2008 CENELEC 03903 EN 60958-1 Digital audio interface - Part 1: General - Incorporates Amendment A1: 2014 2008 CENELEC 03904 CLC/TR 50454 Guide for the application of aluminium electrolytic capacitors 2008 CENELEC 03905 EN 61158-3-16 Industrial communication networks - Fieldbus specifications - Part 3-16: Data-link layer service definition - Type 16
elements2008 CENELEC 0
3906 EN 60793-2-60 Optical fibres - Part 2-60: Product specifications - Sectional specification for category C single-mode intraconnection fibres 2008 CENELEC 03907 EN 61300-2-15 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-15: Tests -
Torque strength of coupling mechanism2008 CENELEC 0
3908 EN 140101-806 Detail Specification: Fixed low power film resistors - Metal film resistors on high grade ceramic, conformal coated ormolded, axial or preformed leads - Incorporates Amendment A1: 2013
2008 CENELEC 0
3909 EN 62471 Photobiological safety of lamps and lamp systems 2008 CENELEC 03910 EN 60794-3-30 Optical fibre cables - Part 3-30: Outdoor cables - Family specification for optical telecommunication cables for lakes, river
crossings and coastal application2008 CENELEC 0
3911 EN 60034-29 Rotating electrical machines - Part 29: Equivalent loading and superposition techniques - Indirect testing to determinetemperature rise
2008 CENELEC 0
3912 EN 61995-1 Devices for the connection of luminaires for household and similar purposes - Part 1: General requirements - IncorporatesAmendment A1: 2017
2008 CENELEC 0
3913 EN 60794-2-30 Optical fibre cables - Part 2-30: Indoor cables - Family specification for ribbon cables 2008 CENELEC 03914 EN 60384-20-1 Fixed capacitors for use in electronic equipment - Part 20-1: Blank detail specification - Fixed metallized polyphenylene
sulfide film dielectric surface mount d.c. capacitors - Assessment level EZ2008 CENELEC 0
3915 EN 61158-6-7 Industrial communication networks - Fieldbus specifications - Part 6-7: Application layer protocol specification - Type 7elements
2008 CENELEC 0
3916 EN 60512-15-1 Connectors for electronic equipment - Tests and measurements - Part 15-1: Connector tests (mechanical) - Test 15a:Contact retention in insert
2008 CENELEC 0
3917 EN 61290-10-2 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrumanalyzer
2008 CENELEC 0
3918 EN 140100 Sectional Specification: Fixed low power film resistors 2008 CENELEC 03919 EN 61076-3-
116Connectors for electronic equipment - Product requirements - Part 3-116: Rectangular connectors - Detail specification forprotective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrialenvironments
2008 CENELEC 0
3920 EN 62311 Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz -300 GHz)
2008 CENELEC 0
3921 EN 50482 Instrument transformers - Three-phase inductive voltage transformers having Um up to 52 kV 2008 CENELEC 03922 EN 50476 Product standard to demonstrate the compliance of broadcast station transmitters with the reference levels and the basic
restrictions related to public exposure to radio frequency electromagnetic fields (3 MHz - 30 MHz)2008 CENELEC 0
3923 EN 60512-16-6 Connectors for electronic equipment - Tests and measurements - Part 16-6: Mechanical tests on contacts and terminations -Test 16f: Robustness of terminations
2008 CENELEC 0
3924 EN 61158-4-17 Industrial communication networks - Fieldbus specifications - Part 4-17: Data-link layer protocol specification - Type 17elements
2008 CENELEC 0
3925 EN 50289-4-7 Communication cables - Specifications for test methods - Part 4-7: Environmental test methods - Damp heat, steady state 2008 CENELEC 03926 EN 60317-0-3 Specifications for particular types of winding wires - Part 0-3: General requirements - Enamelled round aluminium wire -
Incorporates Amendment A1: 20132008 CENELEC 0
3927 EN 60512-16-3 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations -Test 16c: Contact-bending strength
2008 CENELEC 0
3928 EN 60512-16-13
Connectors for electronic equipment - Tests and measurements - Part 16-13: Mechanical tests on contacts and terminations- Test 16m: Un-wrapping, solderless wrapped connections
2008 CENELEC 0
3929 EN 60034-3 Rotating electrical machines Part 3: Specific requirements for cylindrical rotor synchronous machines 2008 CENELEC 03930 EN 61158-5-11 Industrial communication networks - Fieldbus specifications - Part 5-11: Application layer service definition - Type 11
elements2008 CENELEC 0
3931 EN 50408 Household and similar electrical appliances - Safety - Particular requirements for cab heaters for vehicles - IncorporatesAmendment A1: 2011
2008 CENELEC 0
3932 EN 60601-2-29 Medical electrical equipment - Part 2-29: Particular requirements for the basic safety and essential performance ofradiotherapy simulators - Incorporates Amendment A11: 2011
2008 CENELEC 0
3933 EN 61326-3-2 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirementsfor safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrialapplications w
2008 CENELEC 0
3934 EN 61230 Live working - Portable equipment for earthing or earthing and short-circuiting 2008 CENELEC 03935 EN 61996-2 Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - Part 2:
Simplified voyage data recorder (S-VDR) - Performance requirements, methods of testing and required test results2008 CENELEC 0
3936 EN 61158-3-17 Industrial communication networks - Fieldbus specifications - Part 3-17: Data-link layer service definition - Type 17elements
2008 CENELEC 0
3937 EN 50216-11 Power transformer and reactor fittings - Part 11: Oil and winding temperature indicators 2008 CENELEC 03938 EN 61076-2-
105Connectors for electronic equipment - Product requirements - Part 2-105: Circular connectors - Detail specification for M5connectors with screw-locking
2008 CENELEC 0
3939 EN 62040-1 Uninterruptible power systems (UPS) - Part 1: General and safety requirements for UPS - Incorporates Amendment A1:2013
2008 CENELEC 0
3940 EN 50085-2-2 Cable trunking systems and cable ducting systems for electrical installations - Part 2-2: Particular requirements for cabletrunking systems and cable ducting systems intended for mounting underfloor, flushfloor, or onfloor
2008 CENELEC 0
3941 EN 60512-16-4 Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations -Test 16d: Tensile strength (crimped connections)
2008 CENELEC 0
3942 EN 60794-3-40 Optical fibre cables - Part 3-40: Outdoor cables - Family specification for sewer cables and conduits for installation byblowing and/or pulling in non-man accessible storm and sanitary sewers
2008 CENELEC 0
3943 EN 60641-3-1 Pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Requirementsfor pressboard, types B.0.1, B.0.3, B.2.1, B.2.3, B.3.1, B.3.3, B.4.1, B.4.3, B.5.1, B.5.3 and B.6.1
2008 CENELEC 0
3944 EN 62220-1-3 Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1-3: Determination of the detectivequantum efficiency - Detectors used in dynamic imaging
2008 CENELEC 0
3945 EN 62503 Multimedia quality - Method of assessment of synchronization of audio and video 2008 CENELEC 03946 EN 50117-4-1 Coaxial cables - Part 4-1: Sectional specification for cables for BCT cabling in accordance with EN 50173 - Indoor drop
cables for systems operating at 5 MHz - 3 000 MHz - Incorporates Amendment A1: 20132008 CENELEC 0
3947 EN 60861 Equipment for monitoring of radionuclides in liquid effluents and surface waters 2008 CENELEC 03948 EN 50413 Basic standard on measurement and calculation procedures for human exposure to electric, magnetic and electromagnetic
fields (0 Hz - 300 GHz) - Incorporates Amendment A1: 20132008 CENELEC 0
3949 EN 50264-1 Railway applications - Railway rolling stock power and control cables having special fire performance - Part 1: Generalrequirements
2008 CENELEC 0
3950 EN 60601-1-10 Medical electrical equipment - Part 1-10: General requirements for basic safety and essential performance - CollateralStandard: Requirements for the development of physiologic closed-loop controllers - Incorporates Amendment A1: 2015
2008 CENELEC 0
3951 EN 60851-5 Winding wires - Test methods - Part 5: Electrical properties - Incorporates Amendment A1: 2011 2008 CENELEC 03952 EN 60664-1 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests 2007 CENELEC 03953 EN 60335-2-
106Household and similar electrical appliances - Safety - Part 2-106: Particular requirements for heated carpets and for heatingunits for room heating installed under removable floor coverings
2007 CENELEC 0
3954 EN 61300-2-51 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-51: Tests -Fibre optic connector test for transmission with applied tensile load - Singlemode and multimode
2007 CENELEC 0
3955 EN 61557-2 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuringor monitoring of protective measures - Part 2: Insulation resistance
2007 CENELEC 0
3956 EN 62339-1 Modular component interfaces for surface-mount fluid distribution components - Part 1: Elastomeric seals 2007 CENELEC 03957 CLC/TR 62258-
3Semiconductor die products Part 3: Recommendations for good practice in handling, packing and storage 2007 CENELEC 0
3958 EN 60027-3 Letter symbols to be used in electrical technology Part 3: Logarithmic and related quantities, and their units 2007 CENELEC 03959 EN 61188-5-4 Printed boards and printed board assemblies - Design and use - Part 5-4: Attachment (land/joint) considerations -
Components with J leads on two sides2007 CENELEC 0
3960 EN 50377-8-6 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -Part 8-6: LSH-HR simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconiaferrule category C
2007 CENELEC 0
3961 EN 61760-2 Surface mounting technology - Part 2: Transportation and storage conditions of surface mounting devices (SMD) -Application guide
2007 CENELEC 0
3962 EN 60068-2-1 Environmental testing - Part 2-1: Tests - Test A: Cold 2007 CENELEC 03963 EN 61558-2-2 Safety of power transformers, power supplies, reactors and similar products - Part 2-2: Particular requirements and tests for
control transformers and power supplies incorporating control transformers2007 CENELEC 0
3964 EN 61138 Cables for portable earthing and short-circuiting equipment 2007 CENELEC 03965 EN 61300-3-24 Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-24:
Examinations and Measurements - Keying Accuracy of Optical Connectors for Polarization Maintaining Fibre2007 CENELEC 0
3966 EN 60730-2-4 Automatic electrical controls for household and similar use - Part 2-4: Particular requirements for thermal motor protectorsfor motor-compressors of hermetic and semi-hermetic type
2007 CENELEC 0
3967 EN 50342-2 Lead-acid starter batteries - Part 2: Dimensions of batteries and marking of terminals - Incorporates Amendment A1: 2014 2007 CENELEC 0
3968 EN 61097-1 Global maritime distress and safety system (GMDSS) - Part 1: Radar transponder - Marine search and rescue (SART) -Operational and performance requirements, methods of testing and required test results
2007 CENELEC 0
3969 EN 60927 Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements - Incorporates AmendmentA1: 2013
2007 CENELEC 0
3970 EN 61557-6 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuringor monitoring of protective measures - Part 6: Effectiveness of residual current devices (RCD) in TT, TN and IT systems
2007 CENELEC 0
3971 EN 61131-2 Programmable controllers - Part 2: Equipment requirements and tests 2007 CENELEC 03972 EN 61000-4-34 Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions
and voltage variations immunity tests for equipment with input current more than 16 A per phase2007 CENELEC 0
3973 EN 60587 Electrical insulating materials used under severe ambient conditions - Test methods for evaluating resistance to trackingand erosion
2007 CENELEC 0
3974 EN 62127-1 Ultrasonics - Hydrophones - Part 1: Measurement and characterization of medical ultrasonic fields up to 40 MHz -Incorporates Amendment A1: 2013
2007 CENELEC 0
3975 EN 61300-2-49 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-49: Tests -Connector installation test
2007 CENELEC 0
3976 EN 61753-092-6
Fibre optic interconnecting devices and passive components performance standard - Part 092-6: Non-connectorized single-mode circulators for category O - Uncontrolled environment and sequential test
2007 CENELEC 0
3977 EN 61537 Cable management - Cable tray systems and cable ladder systems 2007 CENELEC 03978 EN 61188-5-3 Printed boards and printed board assemblies - Design and use - Part 5-3: Attachment (land/joint) considerations -
Components with gull-wing leads on two sides2007 CENELEC 0
3979 EN 60027-4 Letter symbols to be used in electric technology - Part 4: Rotating electric machines 2007 CENELEC 03980 EN 60444-9 Measurement of quartz crystal unit parameters - Part 9: Measurement of spurious resonances of piezoelectric crystal units 2007 CENELEC 03981 CLC/TR 50501-
1Railway applications Rolling stock Intercommunication between vehicles and train/wayside Part 1: Data dictionary andrules for functional standardisation
2007 CENELEC 0
3982 EN 140401-802 Detail specification: Fixed low power film SMD resistors - Rectangular - Stability classes 1; 2 - Incorporates AmendmentA3: 2017
2007 CENELEC 0
3983 EN 60384-18-2 Fixed capacitors for use in electronic equipment - Part 18-2: Blank detail specification - Fixed aluminium electrolyticsurface mount capacitors with non-solid electrolyte - Assessment level EZ
2007 CENELEC 0
3984 EN 62379-1 Common control interface for networked digital audio and video products - Part 1: General 2007 CENELEC 03985 EN 60404-13 Magnetic materials - Part 13: Methods of measurement of density, resistivity and stacking factor of electrical steel sheet
and strip2007 CENELEC 0
3986 EN 61558-2-7 Safety of power transformers, power supplies, reactors and similar products - Part 2-7: Particular requirements and tests fortransformers and power supplies for toys
2007 CENELEC 0
3987 EN 60454-2 Pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test 2007 CENELEC 03988 EN 61558-2-1 Safety of power transformers, power supplies, reactors and similar products - Part 2-1: Particular requirements and tests for
separating transformers and power supplies incorporating separating transformers for general applications - RemainsCurrent
2007 CENELEC 0
3989 CLC/TR 50452 Railway applications Radio remote control system of traction vehicle for freight traffic in multiple traction operation 2007 CENELEC 03990 CLC/TR 61800-
6Adjustable speed electrical power drive systems Part 6: Guide for determination of types of load duty and correspondingcurrent ratings
2007 CENELEC 0
3991 EN 62421 Electronics assembly technology - Electronic modules 2007 CENELEC 03992 EN 61192-5 Workmanship requirements for soldered electronic assemblies - Part 5: Rework, modification and repair of soldered
electronic assemblies2007 CENELEC 0
3993 EN 62021-2 Insulating liquids - Determination of acidity - Part 2: Colourimetric titration 2007 CENELEC 03994 EN 61937-8 Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 8: Non-linear PCM
bitstreams according to the Windows Media Audio (WMA) Professional format2007 CENELEC 0
3995 EN 60684-3-246
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 246: Heat-shrinkable polyolefinsleeving, dual wall, not flame retarded
2007 CENELEC 0
3996 EN 62132-3 Integrated circuits - Measurement of electromagnetic immunity, 150 kHz to 1 GHz - Part 3: Bulk current injection (BCI)method
2007 CENELEC 0
3997 EN 62056-53 Electricity Metering - Data Exchange for Meter Reading, Tariff and Load Control Part 53: COSEM Application Layer -Remains Current
2007 CENELEC 0
3998 EN 60684-3-211
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 211: Heat-shrinkable sleeving,semi-rigid polyolefin, shrink ratio 2:1
2007 CENELEC 0
3999 EN 61223-2-6 Evaluation and routine testing in medical imaging departments - Part 2-6: Constancy tests - Imaging performance ofcomputed tomography X-ray equipment
2007 CENELEC 0
4000 EN 50377-8-4 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -Part 8-4: LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrulecategory U
2007 CENELEC 0
4001 EN 62273-1 Methods of measurement for radio transmitters - Part 1: Performance characteristics of terrestrial digital televisiontransmitters
2007 CENELEC 0
4002 EN 61753-1 Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance forperformance standards
2007 CENELEC 0
4003 EN 50377-8-2 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -Part 8-2: Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, compositeferrule category C
2007 CENELEC 0
4004 EN 50464-3 Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipmentnot exceeding 36 kV - Part 3: Determination of the power rating of a transformer loaded with non-sinusoidal currents
2007 CENELEC 0
4005 EN 61000-4-18 Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory waveimmunity test - Incorporating corrigendum September 2007; Incorporates Amendment A1: 2010
2007 CENELEC 0
4006 CLC/TR 50511 Railway applications - Communications, signalling and processing systems - ERTMS/ETCS - External signalling for linesequipped with ERTMS/ETCS Level 2
2007 CENELEC 0
4007 EN 50478 Functional receiver specification of satellite digital interactive television with a low data rate return channel via satellite -Modem layer specification
2007 CENELEC 0
4008 EN 60191-6-16 Mechanical standardization of semiconductor devices - Part 6-16: Glossary of semiconductor tests and burn-in sockets forBGA, LGA, FBGA and FLGA
2007 CENELEC 0
4009 EN 60565 Underwater acoustics - Hydrophones - Calibration in the frequency range 0,01 Hz to 1 MHz 2007 CENELEC 04010 CLC/TR 50451 Railway applications Systematic allocation of safety integrity requirements 2007 CENELEC 04011 EN 61000-6-4 Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments -
Incorporates Amendment A1: 20112007 CENELEC 0
4012 EN 62272-2 Digital radio mondiale (DRM) - Part 2: Digital radio in the bands below 30 MHz - Methods of measurement for DRMtransmitters
2007 CENELEC 0
4013 EN 60763-2 Specification for laminated pressboard - Part 2: Methods of test 2007 CENELEC 04014 EN 62022 Installed monitors for the control and detection of gamma radiations contained in recyclable or non-recyclable materials
transported by vehicles2007 CENELEC 0
4015 EN 61988-4 Plasma display panels - Part 4: Climatic and mechanical testing methods 2007 CENELEC 04016 EN 61340-3-1 Electrostatics - Part 3-1: Methods for simulation of electrostatic effects - Human body model (HBM) electrostatic discharge
test waveforms2007 CENELEC 0
4017 EN 60970 Insulating liquids - Methods for counting and sizing particles - Incorporating corrigendum January 2008 2007 CENELEC 04018 EN 60684-3-
248Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 248: General purpose, heat-shrinkable, dual wall polyolefin sleeving, flame retarded, shrink ratios 2:1, 3:1, 4:1
2007 CENELEC 0
4019 EN 60947-5-2 Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches -Incorporates Amendment A1: 2012
2007 CENELEC 0
4020 EN 62347 Guidance on system dependability specifications 2007 CENELEC 0
4021 CLC/TR 50459-7
Railway applications - Communication, signalling and processing systems - European Rail Traffic Management System -Driver-Machine interface - Part 7: Specific Transmission Modules
2007 CENELEC 0
4022 EN 62220-1-2 Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1-2: Determination of the detectivequantum efficiency - Detectors used in mammography
2007 CENELEC 0
4023 EN 62230 Electric cables - Spark-test method - Incorporates Amendment A1: 2014 2007 CENELEC 04024 EN 50377-8-9 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -
Part 8-9: LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconiaferrule category U
2007 CENELEC 0
4025 EN 61023 Maritime navigation and radiocommunication equipment and systems - Marine speed and distance measuring equipment(SDME) - Performance requirements, methods of testing and required test results
2007 CENELEC 0
4026 EN 60534-9 Industrial-process control valves - Part 9: Test procedure for response measurements from step inputs 2007 CENELEC 04027 EN 61169-2 Radio-frequency connectors - Part 2: Sectional specification - Radio frequency coaxial connectors of type 9,52 2007 CENELEC 04028 EN 60068-2-82 Environmental testing - Part 2-82: Tests - Test Tx: Whisker test methods for electronic and electric components 2007 CENELEC 04029 EN 61157 Standard means for the reporting of the acoustic output of medical diagnostic ultrasonic equipment - Incorporates
Amendment A1: 20132007 CENELEC 0
4030 EN 50377-8-3 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -Part 8-3: LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrulecategory C
2007 CENELEC 0
4031 EN 62271-209 High-voltage switchgear and controlgear - Part 209: Cable connections for gas-insulated metal-enclosed switchgear forrated voltages above 52 kV - Fluid-filled and extruded insulation cables - Fluid-filled and dry-type cable-terminations
2007 CENELEC 0
4032 EN 60317-0-5 Specifications for particular types of winding wires Part 0-5: General requirements - Glass-fibre braided resin or varnishimpregnated, bare or enamelled rectangular copper wire
2007 CENELEC 0
4033 EN 61098 Radiation protection instrumentation - Installed personnel surface contamination monitoring assemblies 2007 CENELEC 04034 EN 60068-2-2 Environmental testing - Part 2-2: Tests - Test B: Dry heat 2007 CENELEC 04035 EN 61169-37 Radio-frequency connectors - Part 37: Sectional specification for STWX8 R.F connectors 2007 CENELEC 04036 EN 60068-3-11 Environmental testing - Part 3-11: Supporting documentation and guidance - Calculation of uncertainty of conditions in
climatic test chambers2007 CENELEC 0
4037 EN 60454-3-11 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 11:Polyester film combinations with glass filament, creped cellulosic paper, polyester non-woven, epoxy and pressure-sensitive adhesives
2007 CENELEC 0
4038 EN 60670-21 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 21: Particularrequirements for boxes and enclosures with provision for suspension means
2007 CENELEC 0
4039 EN 55012 Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurementfor the protection of off-board receivers - Incorporates Amendment A1: 2009
2007 CENELEC 0
4040 EN 60730-2-10 Automatic electrical controls for household and similar use - Part 2-10: Particular requirements for motor-starting relays 2007 CENELEC 04041 EN 50377-8-8 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -
Part 8-8: LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconiaferrule category U
2007 CENELEC 0
4042 EN 50289-1-16 Communication cables - Specifications for test methods - Part 1-16: Electromagnetic performance - Coupling attenuation ofcable assemblies (Field conditions)
2007 CENELEC 0
4043 EN 140401-801 Detail specification: Fixed low power film SMD resistors - Rectangular - Stability classes 0,1; 0,25; 0,5; 1 - IncorporatesAmendment A1: 2013
2007 CENELEC 0
4044 EN 60730-2-3 Automatic electrical controls for household and similar use - Part 2-3: Particular requirements for thermal protectors forballasts for tubular fluorescent lamps
2007 CENELEC 0
4045 EN 55020 Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods ofmeasurement - Incorporates Amendment A12: 2016: Remains Current
2007 CENELEC 0
4046 EN 60426 Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods 2007 CENELEC 0
4047 EN 61300-2-26 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-26: Tests -Salt mist
2007 CENELEC 0
4048 EN 62464-1 Magnetic resonance equipment for medical imaging - Part 1: Determination of essential image quality parameters 2007 CENELEC 04049 EN 60027-2 Letter symbols to be used in electrical technology - Part 2: Telecommunications and electronics - Remains Current 2007 CENELEC 04050 EN 61300-3-10 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-10:
Examinations and measurements - Gauge retention force2007 CENELEC 0
4051 EN 61557-7 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuringor monitoring of protective measures - Part 7: Phase sequence
2007 CENELEC 0
4052 EN 60976 Medical electrical equipment - Medical electron accelerators - Functional performance characteristics - IncorporatesAmendment A1: 2000
2007 CENELEC 0
4053 EN 60454-3-4 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Cellulosepaper, creped and non-creped, with rubber thermosetting adhesive
2007 CENELEC 0
4054 EN 60947-1 Low-voltage switchgear and controlgear - Part 1: General rules - Incorporates Amendment A2: 2014 2007 CENELEC 04055 EN 61169-16 Radio-frequency connectors - Part 16: Sectional specification - RF coaxial connectors with inner diameter of outer
conductor 7 mm (0,276 in) with screw coupling - Characteristic impedance 50 ohms (75 ohms) (type N)2007 CENELEC 0
4056 EN 61987-1 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 1:Measuring equipment with analogue and digital output
2007 CENELEC 0
4057 EN 61557-1 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuringor monitoring of protective measures - Part 1: General requirements
2007 CENELEC 0
4058 EN 60034-8 Rotating electrical machines - Part 8: Terminal markings and direction of rotation - Incorporates Amendment A1: 2014 2007 CENELEC 04059 EN 61937-2 Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 2: Burst-info -
Incorporates Amendment A1: 20112007 CENELEC 0
4060 EN 62374 Semiconductor devices - Time Dependent Dielectric Breakdown (TDDB) test for gate dielectric films 2007 CENELEC 04061 EN 60384-4-1 Fixed capacitors for use in electronic equipment - Part 4-1: Blank detail specification - Fixed aluminium electrolytic
capacitors with non-solid electrolyte - Assessment level EZ - Incorporating Corrigendum April 20092007 CENELEC 0
4062 EN 62310-2 Static transfer systems (STS) - Part 2: Electromagnetic compatibility (EMC) requirements 2007 CENELEC 04063 EN 50377-8-5 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -
Part 8-5: LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrulecategory U
2007 CENELEC 0
4064 EN 60664-5 Insulation coordination for equipment within low-voltage systems - Part 5: Comprehensive method for determiningclearances and creepage distances equal to or less than 2 mm
2007 CENELEC 0
4065 EN 60384-18-1 Fixed capacitors for use in electronic equipment - Part 18-1: Blank detail specification - Fixed aluminium electrolyticsurface mount capacitors with solid (MnO2) electrolyte - Assessment level EZ
2007 CENELEC 0
4066 EN 61300-2-22 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests -Change of temperature
2007 CENELEC 0
4067 EN 61340-3-2 Electrostatics - Part 3-2: Methods for simulation of electrostatic effects - Machine model (MM) electrostatic discharge testwaveforms
2007 CENELEC 0
4068 EN 61788-2 Superconductivity Part 2: Critical current measurement - DC critical current of Nb3Sn composite superconductors 2007 CENELEC 04069 EN 60947-5-9 Low-voltage switchgear and controlgear - Part 5-9: Control circuit devices and switching elements - Flow rate switches 2007 CENELEC 04070 EN 61557-5 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring
or monitoring of protective measures - Part 5: Resistance to earth2007 CENELEC 0
4071 EN 62137-1-2 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-2: Shearstrength test
2007 CENELEC 0
4072 EN 50494 Satellite signal distribution over a single coaxial cable in single dwelling installations 2007 CENELEC 04073 EN 62317-1 Ferrite cores - Dimensions - Part 1: General specification 2007 CENELEC 04074 EN 140401-803 Detail specification: Fixed low power film SMD resistors - Cylindrical - Stability classes 0,05; 0,1; 0,25; 0,5; 1; 2 -
Incorporates Amendment A3: 20172007 CENELEC 0
4075 EN 60904-9 Photovoltaic devices - Part 9: Solar simulator performance requirements 2007 CENELEC 04076 EN 61462 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage
greater than 1 000 V - Definitions, test methods, acceptance criteria and design recommendations2007 CENELEC 0
4077 EN 61169-8 Radio-frequency connectors - Part 8: Sectional specification - RF coaxial connectors with inner diameter of outer conductor6,5 mm (0,256 in) with bayonet lock - Characteristic impedance 50 ohms (type BNC)
2007 CENELEC 0
4078 EN 60269-1 Low-voltage fuses - Part 1: General requirements - Incorporates Amendment A2: 2014 2007 CENELEC 04079 EN 62026-1 Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 1: General rules 2007 CENELEC 04080 EN 61181 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical
equipment - Incorporates Amendment A1: 20122007 CENELEC 0
4081 EN 60915 Fixed capacitors and resistors for use in electronic equipment - Preferred dimensions of shaft ends, bushes and for themounting of single-hole, bush-mounted, shaft-operated electronic components
2007 CENELEC 0
4082 EN 50377-10-1 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -Part 10-1: Type MU-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with fullzirconia ferrule category
2007 CENELEC 0
4083 HD 620 S1/A3 Distribution cables with extruded insulation for rated voltages from 3,6/6 (7,2) kV to 20,8/36 (42) kV - IncorporatingCorrigendum December 2007
2007 CENELEC 0
4084 CLC/TR 50479 Electrical installation guide - Selection and erection of electrical equipment - Wiring systems - Limitation of temperaturerise of connecting interfaces
2007 CENELEC 0
4085 EN 50378-3-2 Passive components to be used in optical fibre communication systems - Product specifications - Part 3-2: Type 4 / 8channel CWDM module terminated on IEC 60793-2-50 category B1.1 and B1.3 single mode fibre
2007 CENELEC 0
4086 EN 61290-10-4 Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction method using anoptical spectrum analyzer
2007 CENELEC 0
4087 EN 62226-3-1 Exposure to electric or magnetic fields in the low and intermediate frequency range - Methods for calculating the currentdensity and internal electric field induced in the human body - Part 3-1: Exposure to electric fields - Analytical and 2Dnumerical m
2007 CENELEC 0
4088 EN 61025 Fault tree analysis (FTA) 2007 CENELEC 04089 EN 60423 Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits
and fittings2007 CENELEC 0
4090 EN 61937-9 Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 9: Non-linear PCMbitstreams according to the MAT format
2007 CENELEC 0
4091 EN 61557-3 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuringor monitoring of protective measures - Part 3: Loop impedance
2007 CENELEC 0
4092 EN 50377-8-7 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -Part 8-7: LSH-PC terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrulecategory C
2007 CENELEC 0
4093 EN 61300-3-15 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-15:Examinations and measurements - Dome eccentricity of a convex polished ferrule endface
2007 CENELEC 0
4094 EN 62104 Characteristics of DAB receivers - Incorporating corrigendum August 2007 2007 CENELEC 04095 EN 61188-5-5 Printed boards and printed board assemblies - Design and use - Part 5-5: Attachment (land/joint) considerations -
Components with gull-wing leads on four sides2007 CENELEC 0
4096 CLC/TR 50173-99-1
Cabling guidelines in support of 10 GBASE-T 2007 CENELEC 0
4097 EN 50464-4 Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipmentnot exceeding 36 kV - Part 4: Requirements and tests concerning pressurised corrugated tanks - Incorporates AmendmentA1: 2011
2007 CENELEC 0
4098 EN 61968-4 Application integration at electric utilities - System interfaces for distribution management - Part 4: Interfaces for recordsand asset management
2007 CENELEC 0
4099 EN 61937-1 Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 1: General - IncorporatesAmendment A1: 2011
2007 CENELEC 0
4100 CLC/TR 50507 Railway applications Interference limits of existing track circuits used on European railways 2007 CENELEC 04101 EN 61290-7-1 Optical amplifiers - Test methods - Part 7-1: Out-of-band insertion losses - Filtered optical power meter method 2007 CENELEC 04102 EN 50377-6-2 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -
Part 6-2: SC-RJ single mode terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, category U2007 CENELEC 0
4103 EN 50497 Recommended test method for assessment of the risk of plasticizer exudation from PVC insulated and sheathed cables 2007 CENELEC 04104 EN 60601-1-8 Medical electrical equipment - Part 1-8: General requirements for basic safety and essential performance - Collateral
Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medicalelectrical systems - Inc
2007 CENELEC 0
4105 EN 50378-3-1 Passive components to be used in optical fibre communication systems - Product specifications - Part 3-1: Type: 100/200GHz DWDM module terminated on IEC 60793-2-50 category B1.1 and B1.3 single mode fibre
2007 CENELEC 0
4106 EN 62127-3 Ultrasonics - Hydrophones - Part 3: Properties of hydrophones for ultrasonic fields up to 40 MHz - IncorporatesAmendment A1: 2013
2007 CENELEC 0
4107 EN 61000-6-3 Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial andlight-industrial environments - Incorporates Amendment A1: 2011
2007 CENELEC 0
4108 EN 60645-3 Electroacoustics - Audiometric equipment - Part 3: Test signals of short duration 2007 CENELEC 04109 EN 61800-5-1 Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy -
Incorporates Amendment A1: 20172007 CENELEC 0
4110 EN 81714-2 Design of Graphical Symbols for Use in the Technical Documentation of Products - Part 2: Specification for GraphicalSymbols in a Computer Sensible Form, Including Graphical Symbols for a Reference Library, and Requirements for TheirInterchange
2007 CENELEC 0
4111 EN 61300-2-50 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-50: Tests -Fibre optic connector proof test with static load - Singlemode and multimode
2007 CENELEC 0
4112 EN 60309-4 Plugs, socket-outlets and couplers for industrial purposes - Part 4: Switched socket-outlets and connectors with or withoutinterlock - Incorporates Amendment A1: 2012
2007 CENELEC 0
4113 EN 62127-2 Ultrasonics - Hydrophones - Part 2: Calibration for ultrasonic fields up to 40 MHz - Incorporates Amendment A2: 2017 2007 CENELEC 04114 CLC/TS 50509 Use of LED signal heads in road traffic signal systems 2007 CENELEC 04115 EN 61071 Capacitors for power electronics 2007 CENELEC 04116 EN 60027-6 Letter symbols to be used in electrical technology - Part 6: Control technology 2007 CENELEC 04117 EN 61000-6-1 Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-
industrial environments2007 CENELEC 0
4118 EN 61788-1 Superconductivity Part 1: Critical current measurement - DC critical current of Nb-Ti composite superconductors 2007 CENELEC 04119 EN 60706-5 Maintainability of equipment - Part 5: Testability and diagnostic testing 2007 CENELEC 04120 EN 61557-4 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring
or monitoring of protective measures - Part 4: Resistance of earth connection and equipotential bonding2007 CENELEC 0
4121 EN 62137-1-1 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-1: Pullstrength test
2007 CENELEC 0
4122 EN 60519-11 Safety in electroheat installations - Part 11: Particular requirements for installations using the effect of electromagneticforces on liquid metals
2007 CENELEC 0
4123 CLC/TR 50506-1
Railway applications - Communication, signalling and processing systems - Application Guide for EN 50129 - Part 1:Cross-acceptance
2007 CENELEC 0
4124 EN 62402 Obsolescence management - Application guide 2007 CENELEC 04125 EN 62025-1 High frequency inductive components - Non-electrical characteristics and measuring methods - Part 1: Fixed, surface
mounted inductors for use in electronic and telecommunication equipment2007 CENELEC 0
4126 EN 60384-4-2 Fixed capacitors for use in electronic equipment - Part 4-2: Blank detail specification - Fixed aluminium electrolyticcapacitors with solid (MnO2) electrolyte - Assessment level EZ - Incorporating Corrigendum April 2009
2007 CENELEC 0
4127 EN 61193-2 Quality assessment systems - Part 2: Selection and use of sampling plans for inspection of electronic components andpackages
2007 CENELEC 0
4128 EN 61810-7 Electromechanical elementary relays Part 7: Test and measurement procedures 2006 CENELEC 04129 EN 62258-5 Semiconductor die products Part 5: Requirements for information concerning electrical simulation 2006 CENELEC 04130 EN 50461 Solar cells Datasheet information and product data for crystalline silicon solar cells 2006 CENELEC 04131 EN 60601-1 Medical electrical equipment Part 1: General requirements for basic safety and essential performance - Incorporates
Amendment A12: 20142006 CENELEC 0
4132 EN 62071-3 Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-7 Part 3: Data streamformat
2006 CENELEC 0
4133 EN 61937-6 Digital audio Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 6: Non-linear PCMbitstreams according to the MPEG-2 AAC and MPEG-4 AAC audio formats - Incorporates Amendment A1: 2014
2006 CENELEC 0
4134 EN 60371-3-1 Specification for Insulation Materials Based on Mica Part 3: Specifications for Individual Materials Sheet 1: CommutatorSeparators and Materials
2006 CENELEC 0
4135 EN 61788-7 Superconductivity Part 7: Electronic characteristic measurements - Surface resistance of superconductors at microwavefrequencies
2006 CENELEC 0
4136 EN 61048 Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safetyrequirements - Incorporates Amendment A1: 2016
2006 CENELEC 0
4137 EN 60598-2-13 Luminaires Part 2-13: Particular requirements - Ground recessed luminaires - Incorporating Corrigendum December 2006;Incorporates Amendment A2: 2016
2006 CENELEC 0
4138 EN 62141 Helical-scan digital video cassette recording format using 12,65 mm magnetic tape and incorporating MPEG-4compression - Type D-16 format
2006 CENELEC 0
4139 EN 60519-2 Safety in electroheat installations Part 2: Particular requirements for resistance heating equipment 2006 CENELEC 04140 EN 60512-14-6 Connectors for electronic equipment - Tests and measurements Part 14-6: Sealing tests - Test 14f: Interfacial sealing 2006 CENELEC 04141 EN 50397-1 Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV a.c. and not exceeding 36
kV a.c. Part 1: Covered conductors2006 CENELEC 0
4142 EN 50420 Basic standard for the evaluation of human exposure to electromagnetic fields from a stand alone broadcast transmitter (30MHz - 40 GHz)
2006 CENELEC 0
4143 EN 50414 Test methods for analysis of lead in PVC taken from insulation and sheath of electric and optical fibre cables - Method A:Total lead content determination with flame excitation atomic absorption spectrometry - Method B: Qualitative analysis oflead by le
2006 CENELEC 0
4144 EN 60297-3-104
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series Part3-104: Connector dependent interface dimensions of subracks and plug-in units
2006 CENELEC 0
4145 EN 60512-12-2 Connectors for electronic equipment - Tests and measurements Part 12-2: Soldering tests - Test 12b: Solderability, wetting,soldering iron method - Incorporating corrigendum December 2006
2006 CENELEC 0
4146 EN 60335-2-90 Household and similar electrical appliances Safety Part 2-90: Particular requirements for commercial microwave ovens -Incorporates Amendment A1: 2010
2006 CENELEC 0
4147 EN 61338-1-4 Waveguide type dielectric resonators Part 1-4: General information and test conditions - Measurement method of complexrelative permittivity for dielectric resonator materials at millimetre-wave frequency - Incorporating corrigendum November2006
2006 CENELEC 0
4148 EN 50441-3 Cables for indoor residential telecommunication installations Part 3: Screened cables - Grade 3 2006 CENELEC 04149 EN 50446 Straight thermocouple assembly with metal or ceramic protection tube and accessories 2006 CENELEC 04150 EN 60706-3 Maintainability of equipment Part 3: Verification and collection, analysis and presentation of data 2006 CENELEC 04151 EN 61300-3-32 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-32:
Examinations and measurements - Polarization mode dispersion measurement for passive optical components2006 CENELEC 0
4152 EN 61076-1 Connectors for electronic equipment - Product requirements Part 1: Generic specification 2006 CENELEC 04153 EN 61760-1 Surface Mounting Technology Part 1: Standard Method for the Specification of Surface Mounting Components (SMDs) 2006 CENELEC 0
4154 EN 62231 Composite station post insulators for substations with a.c. voltages greater than 1 000 V up to 245 kV - Definitions, testmethods and acceptance criteria
2006 CENELEC 0
4155 EN 61747-3 Liquid crystal display devices Part 3: Liquid crystal display (LCD) cells - Sectional specification 2006 CENELEC 04156 EN 60793-1-34 Optical fibres - Part 1-34: Measurement methods and test procedures - Fibre curl 2006 CENELEC 04157 EN 60335-2-97 Household and similar electrical appliances - Safety Part 2-97: Particular requirements for drives for rolling shutters,
awnings, blinds and similar equipment - Incorporates Amendment A12: 20152006 CENELEC 0
4158 EN 60076-13 Power transformers Part 13: Self-protected liquid-filled transformers 2006 CENELEC 04159 EN 61033 Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate 2006 CENELEC 04160 EN 60076-5 Power transformers Part 5: Ability to withstand short-circuit 2006 CENELEC 04161 EN 62047-3 Semiconductor devices - Micro-electromechanical devices Part 3: Thin film standard test piece for tensile testing 2006 CENELEC 04162 EN 61076-7-
100Connectors for electronic equipment - Product requirements Part 7-100: Cable outlet accessories - Detail specification for ametric cable sealing consisting of an integrated part of heavy-duty rectangular or circular connector hoods and a sealingsystem
2006 CENELEC 0
4163 EN 62261-2 Television METADATA Part 2: Data encoding protocol using key-length-value 2006 CENELEC 04164 EN 62197-1 Connectors for electronic equipment Quality assessment requirements Part 1: Generic specification 2006 CENELEC 04165 EN 60512-12-3 Connectors for electronic equipment - Tests and measurements Part 12-3: Soldering tests - Test 12c: Solderability, de-
wetting - Incorporating corrigendum December 20062006 CENELEC 0
4166 EN 62373 Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET) 2006 CENELEC 04167 EN 61061-1 Non-Impregnated Densified Laminated Wood for Electrical Purposes Part 1: Definitions, Designations and General
Requirements2006 CENELEC 0
4168 EN 60512-14-5 Connectors for electronic equipment - Tests and measurements Part 14-5: Sealing tests - Test 14e: Immersion at low airpressure
2006 CENELEC 0
4169 EN 61212-3-3 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposesPart 3: Specifications for individual materials Sheet 3: Round laminated moulded rods
2006 CENELEC 0
4170 EN 60512-12-4 Connectors for electronic equipment - Tests and measurements Part 12-4: Soldering tests - Test 12d: Resistance tosoldering heat, solder bath method - Incorporating corrigendum December 2006
2006 CENELEC 0
4171 EN 60950-23 Information technology equipment - Safety Part 23: Large data storage equipment - Incorporating corrigendum October2008
2006 CENELEC 0
4172 EN 175301-801 Detail Specification: High density rectangular connectors, round removable crimp contacts 2006 CENELEC 04173 EN 60793-1-49 Optical fibres Part 1-49: Measurement methods and test procedures - Differential mode delay 2006 CENELEC 04174 EN 60352-2 Solderless Connections Part 2: Crimped Connections - General Requirements, Test Methods and Practical Guidance -
Incorporates Amendment A1: 20132006 CENELEC 0
4175 EN 62391-2-1 Fixed electric double-layer capacitors for use in electronic equipment Part 2-1: Blank detail specification - Electric-doublelayer capacitors for power application - Assessment level EZ
2006 CENELEC 0
4176 EN 50085-2-1 Cable trunking systems and cable ducting systems for electrical installations Part 2-1: Cable trunking systems and cableducting systems intended for mounting on walls and ceilings - Incorporates Amendment A1: 2011
2006 CENELEC 0
4177 EN 61204-7 Low voltage power supplies, d.c. output Part 7: Safety requirements - Incorporates Amendment A11: 2009; RemainsCurrent
2006 CENELEC 0
4178 EN 60027-1 Letter symbols to be used in electrical technology Part 1: General - Incorporates Amendment A1: 2007 2006 CENELEC 04179 EN 60384-19-1 Fixed capacitors for use in electronic equipment Part 19-1: Blank detail specification - Fixed metallized polyethylene-
terephthalate film dielectric surface mount d.c. capacitors - Assessment level EZ - Incorporating corrigendum November2006
2006 CENELEC 0
4180 CLC/TR 50489 Smart tracker chips - Feasibility study on the inclusion of RFID in Electrical and Electronic Equipment for WEEEmanagement
2006 CENELEC 0
4181 EN 61076-3-106
Connectors for electronic equipment - Product requirements Part 3-106: Rectangular connectors - Detail specification forprotective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating theIEC 60603-7 se
2006 CENELEC 0
4182 EN 60384-25-1 Fixed capacitors for use in electronic equipment Part 25-1: Blank detail specification Surface mount fixed aluminiumelectrolytic capacitors with conductive polymer solid electrolyte Assessment level EZ
2006 CENELEC 0
4183 EN 60825-4 Safety of laser products Part 4: Laser guards - Incorporates Amendment A2: 2011 2006 CENELEC 04184 EN 60335-2-14 Household and similar electrical appliances - Safety Part 2-14: Particular requirements for kitchen machines - Incorporates
Amendment A12: 20162006 CENELEC 0
4185 EN 60512-12-5 Connectors for electronic equipment - Tests and measurements Part 12-5: Soldering tests - Test 12e: Resistance tosoldering heat, soldering iron method - Incorporating corrigendum December 2006
2006 CENELEC 0
4186 EN 60556 Gyromagnetic materials intended for application at microwave frequencies - Measuring methods for properties -Incorporates Amendment A1: 2016
2006 CENELEC 0
4187 HD 629.1 S2 Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV Part 1:Cables with extruded insulation - Incorporates Amendment A1: 2008
2006 CENELEC 0
4188 EN 62304 Medical device software - Software life-cycle processes - Incorporating Corrigendum November 2008; IncorporatesAmendment A1: 2015
2006 CENELEC 0
4189 EN 61315 Calibration of Fibre Optic Power Meters 2006 CENELEC 04190 EN 61391-1 Ultrasonics - Pulse-echo scanners Part 1: Techniques for calibrating spatial measurement systems and measurement of
system point-spread function response - Incorporates Amendment A1: 20172006 CENELEC 0
4191 CLS/TS 50466 Long duration storage of electronic components Specification for implementation 2006 CENELEC 04192 EN 60454-3-8 Pressure-sensitive adhesive tapes for electrical purposes Part 3: Specifications for individual materials Sheet 8: Woven
fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre -Incorporating C
2006 CENELEC 0
4193 EN 61747-3-1 Liquid crystal display devices Part 3-1: Liquid crystal display (LCD) cells - Blank detail specification 2006 CENELEC 04194 EN 61212-2 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes
Part 2: Methods of test2006 CENELEC 0
4195 EN 61788-10 Superconductivity Part 10: Critical temperature measurement Critical temperature of composite superconductors by aresistance method
2006 CENELEC 0
4196 EN 61966-2-4 Multimedia systems and equipment - Colour measurement and management Part 2-4: Colour management - Extended-gamut YCC colour space for video applications - xvYCC - Incorporates Amendment A1: 2016
2006 CENELEC 0
4197 EN 60534-4 Industrial-process control valves Part 4: Inspection and routine testing 2006 CENELEC 04198 EN 62071-1 Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-7 Part 1: VTR
specifications2006 CENELEC 0
4199 EN 61755-3-6 Fibre optic connector optical interfaces Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degreesangled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre - Incorporates AmendmentA1: 2012
2006 CENELEC 0
4200 EN 61756-1 Fibre optic interconnecting devices and passive components - Interface standard for fibre management systems Part 1:General and guidance
2006 CENELEC 0
4201 EN 60684-3-233
Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 233: Heat-shrinkablefluoroelastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1
2006 CENELEC 0
4202 EN 61212-1 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposesPart 1: Definitions, designations and general requirements
2006 CENELEC 0
4203 EN 62317-9 Ferrite cores - Dimensions Part 9: Planar cores - Incorporates Amendment A1: 2007 2006 CENELEC 04204 EN 60371-3-2 Insulating materials based on mica Part 3: Specifications for individual materials Sheet 2: Mica paper 2006 CENELEC 04205 EN 61076-3-
112Connectors for electronic equipment Part 3-112: Rectangular connectors Detail specification for rectangular connectorswith four contacts for high performance serial bus for consumer audio/video equipment
2006 CENELEC 0
4206 EN 50050 Electrical Apparatus for Potentially Explosive Atmospheres - Electrostatic Hand-Held Spraying Equipment 2006 CENELEC 04207 EN 61755-3-5 Fibre optic connector optical interfaces Part 3-5: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical PC
composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre2006 CENELEC 0
4208 EN 50419 Marking of electrical and electronic equipment in accordance with Article 11(2) of Directive 2002/96/EC (WEEE) 2006 CENELEC 0
4209 EN 60904-1 Photovoltaic devices Part 1: Measurement of photovoltaic current-voltage characteristics 2006 CENELEC 04210 EN 50421 Product standard to demonstrate the compliance of stand alone broadcast transmitters with the reference levels or the basic
restrictions related to public human exposure to radio frequency electromagnetic fields (30 MHz - 40 GHz)2006 CENELEC 0
4211 EN 61753-101-2
Fibre optic interconnecting devices and passive components performance standard - Part 101-2: Fibre management systemsfor category C - Controlled environment
2006 CENELEC 0
4212 EN 60519-4 Safety in electroheat installations Part 4: Particular requirements for arc furnace installations 2006 CENELEC 04213 EN 61189-6 Test methods for electrical materials, interconnection structures and assemblies Part 6: Test methods for materials used in
manufacturing electronic assemblies2006 CENELEC 0
4214 EN 60068-2-21 Environmental Testing - Part 2-21: Tests - Test U: Robustness of Terminations and Integral Mounting Devices 2006 CENELEC 04215 EN 60870-5-
104Telecontrol equipment and systems Part 5-104: Transmission protocols - Network access for IEC 60870-5-101 usingstandard transport profiles - Incorporates Amendment A1: 2016
2006 CENELEC 0
4216 EN 60371-3-5 Insulating materials based on mica Part 3: Specifications for individual materials Sheet 5: Glass-backed mica paper with anepoxy resin binder for post-impregnation (VPI)
2006 CENELEC 0
4217 EN 60512-14-2 Connectors for electronic equipment - Tests and measurements Part 14-2: Sealing tests - Test 14b: Sealing - Fine airleakage
2006 CENELEC 0
4218 EN 60684-3-212
Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 212: Heat-shrinkable polyolefinsleevings
2006 CENELEC 0
4219 EN 60384-13-1 Fixed capacitors for use in electronic equipment Part 13-1: Blank detail specification - Fixed polypropylene film dielectricmetal foil d.c. capacitors - Assessment level E
2006 CENELEC 0
4220 HD 629.2 S2 Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV Part 2:Cables with impregnated paper insulation - Incorporates Amendment A1: 2008
2006 CENELEC 0
4221 EN 61754-13 Fibre optic connector interfaces Part 13: Type FC-PC connector 2006 CENELEC 04222 EN 60670-22 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 22: Particular
requirements for connecting boxes and enclosures2006 CENELEC 0
4223 EN 61937-5 Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 5: Non-linear PCMbitstreams according to the DTS (Digital Theater Systems) format(s)
2006 CENELEC 0
4224 EN 62329-1 Heat shrinkable moulded shapes Part 1: Definitions and general requirements - Incorporating Corrigendum December 2006 2006 CENELEC 04225 EN 62271-108 High-voltage switchgear and controlgear Part 108: High-voltage alternating current disconnecting circuit-breakers for rated
voltages of 72,5 kV and above2006 CENELEC 0
4226 EN 62076 Industrial electroheating installations - Test methods for induction channel and induction crucible furnaces 2006 CENELEC 04227 EN 62317-8 Ferrite cores - Dimensions Part 8: E-cores 2006 CENELEC 04228 EN 60704-3 Household and similar electrical appliances â__ Test code for the determination of airborne acoustical noise Part 3:
Procedure for determining and verifying declared noise emission values - Remains Current2006 CENELEC 0
4229 EN 60898-2 Circuit-Breakers for Overcurrent Protection for Household and Similar Installations Part 2: Circuit-Breakers for A.C. andD.C. Operation
2006 CENELEC 0
4230 EN 61290-5-1 Optical amplifiers - Test methods Part 5-1: Reflectance parameters - Optical spectrum analyzer method 2006 CENELEC 04231 EN 60947-5-8 Low-voltage switchgear and controlgear Part 5-8: Control circuit devices and switching elements - Three-position enabling
switches2006 CENELEC 0
4232 EN 60512-13-1 Connectors for electronic equipment - Tests and measurements Part 13-1: Mechanical operation tests - Test 13a: Engagingand separating forces - Incorporates Corringendum December 2006
2006 CENELEC 0
4233 EN 61300-3-18 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 3-18:Examinations and Measurements Keying Accuracy of an Angled Endface Connector
2006 CENELEC 0
4234 EN 61163-1 Reliability stress screening Part 1: Repairable assemblies manufactured in lots 2006 CENELEC 04235 EN 61000-4-3 Electromagnetic compatibility (EMC) Part 4-3: Testing and measurement techniques - Radiated, radio-frequency,
electromagnetic field immunity test - Incorporates Amendment A2: 20102006 CENELEC 0
4236 EN 61300-2-14 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-14: Tests -Optical power handling and damage threshold characterization
2006 CENELEC 0
4237 EN 175301-803 Detail Specification: Rectangular connectors - Flat contacts, 0,8 mm thickness, locking screw not detachable 2006 CENELEC 04238 EN 62308 Equipment reliability - Reliability assessment methods 2006 CENELEC 04239 EN 62314 Solid-state relays 2006 CENELEC 04240 CLC/TR 50450 Resistibility requirements for equipment having (a) telecommunication port(s) 2006 CENELEC 04241 EN 61280-2-11 Fibre optic communication subsystem test procedures Part 2-11: Digital systems - Averaged Q-factor determination using
amplitude histogram evaluation for optical signal quality monitoring2006 CENELEC 0
4242 EN 61308 High-Frequency Dielectric Heating Installations Test Methods for the Determination of Power Output 2006 CENELEC 04243 EN 62389 Methods of measurement for DVD players 2006 CENELEC 04244 EN 61300-2-46 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-46: Tests Damp
heat cyclic2006 CENELEC 0
4245 EN 60455-3-5 Resin based reactive compounds used for electrical insulation Part 3: Specifications for individual materials Sheet 5:Unsaturated polyester based impregnating resins
2006 CENELEC 0
4246 EN 62132-5 Integrated circuits Measurement of electromagnetic immunity, 150 kHz to 1 GHz Part 5: Workbench Faraday cage method 2006 CENELEC 04247 CLC/TR 62102 Electrical safety Classification of interfaces for equipment to be connected to information and ommunications technology
networks2006 CENELEC 0
4248 EN 62403 High density recording format on CD-R/RW disc system - HD-BURN format 2006 CENELEC 04249 EN 62329-2 Heat shrinkable moulded shapes Part 2: Methods of test 2006 CENELEC 04250 EN 61924 Maritime navigation and radiocommunication equipment and systems - Integrated navigation systems - Operational and
performance requirements, methods of testing and required test results2006 CENELEC 0
4251 EN 60384-24-1 Fixed capacitors for use in electronic equipment Part 24-1: Blank detail specification Surface mount fixed tantalumelectrolytic capacitors with conductive polymer solid electrolyte Assessment level EZ
2006 CENELEC 0
4252 EN 60464-1 Varnishes used for electrical insulation Part 1: Definitions and general requirements - Incorporates Amendment A1: 2006 2006 CENELEC 04253 EN 60512-13-5 Connectors for electronic equipment - Tests and measurements Part 13-5: Mechanical operation tests - Test 13e: Polarizing
and keying method - Incorporating corrigendum December 20062006 CENELEC 0
4254 EN 61582 Radiation protection instrumentation - In vivo counters - Classification, general requirements and test procedures forportable, transportable and installed equipment
2006 CENELEC 0
4255 EN 62059-41 Electricity metering equipment - Dependability Part 41: Reliability prediction 2006 CENELEC 04256 EN 60669-2-2 Switches for household and similar fixed electrical installations Part 2-2: Particular requirements - Electromagnetic remote-
control switches (RCS)2006 CENELEC 0
4257 EN 61755-1 Fibre optic connector optical interfaces Part 1: Optical interfaces for single mode non-dispersion shifted fibres - Generaland guidance - Incorporating corrigendum December 2006
2006 CENELEC 0
4258 EN 60454-3-2 Pressure-Sensitive Adhesive Tapes for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 2: PolyesterFilm Tapes with Rubber Thermosetting or Acrylic Crosslinked Adhesives
2006 CENELEC 0
4259 EN 60738-1 Thermistors - Directly heated positive temperature coefficient Part 1: Generic specification - Incorporates Amendment A1:2009
2006 CENELEC 0
4260 EN 50214 Flat polyvinyl chloride sheathed flexible cables 2006 CENELEC 04261 EN 60730-2-12 Automatic electrical controls for household and similar use Part 2-12: Particular requirements for electrically operated door
locks - Incorporates Amendment A11: 20082006 CENELEC 0
4262 EN 60556 Gyromagnetic materials intended for application at microwave frequencies - Measuring methods for properties -Incorporates Amendment A1: 2016
2006 CENELEC 0
4263 EN 60512-12-1 Connectors for electronic equipment - Tests and measurements Part 12-1: Soldering tests - Test 12a: Solderability, wetting,solder bath method
2006 CENELEC 0
4264 EN 62047-1 Semiconductor devices - Micro-electromechanical devices Part 1: Terms and definitions 2006 CENELEC 04265 EN 61966-7-1 Multimedia Systems and Equipment - Colour Measurement and Management Part 7-1: Colour Printers - Reflective Prints -
RGB Inputs2006 CENELEC 0
4266 EN 61165 Application of Markov techniques 2006 CENELEC 0
4267 EN 61189-5 Test methods for electrical materials, interconnection structures and assemblies Part 5: Test methods for printed boardassemblies
2006 CENELEC 0
4268 EN 62333-2 Noise suppression sheet for digital devices and equipment Part 2: Measuring methods - Incorporates Amendment A1: 2015 2006 CENELEC 04269 EN 62071-2 Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-7 Part 2: Compression
format2006 CENELEC 0
4270 EN 60194 Printed board design, manufacture and assembly - Terms and definitions 2006 CENELEC 04271 EN 60749-35 Semiconductor devices Mechanical and climatic test methods Part 35: Acoustic microscopy for plastic encapsulated
electronic components2006 CENELEC 0
4272 EN 60512-13-2 Connectors for electronic equipment - Tests and measurements Part 13-2: Mechanical operation tests - Test 13b: Insertionand withdrawal forces - Incorporating corrigendum December 2006
2006 CENELEC 0
4273 EN 50131-1 Alarm systems - Intrusion and hold-up systems Part 1: System requirements - Incorporates Amendment A2: 2017 2006 CENELEC 04274 EN 61925 Multimedia systems and equipment - Multimedia home server systems - Vocabulary of home server 2006 CENELEC 04275 EN 60216-4-1 Electrical insulating materials - Thermal endurance properties Part 4-1: Ageing ovens - Single-chamber ovens 2006 CENELEC 04276 EN 61300-2-38 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-38: Tests -
Sealing for pressurized fibre optic closures2006 CENELEC 0
4277 EN 62384 DC or AC supplied electronic control gear for LED modules - Performance requirements - Incorporates Amendment A1:2009
2006 CENELEC 0
4278 EN 60950-1 Information technology equipment - Safety Part 1: General requirements - Incorporates Amendment A2: 2013; RemainsCurrent
2006 CENELEC 0
4279 EN 60706-2 Maintainability of equipment Part 2: Maintainability requirements and studies during the design and development phase 2006 CENELEC 04280 EN 60320-2-4 Appliance couplers for household and similar general purposes Part 2-4: Couplers dependent on appliance weight for
engagement - Incorporates Amendment A1: 20092006 CENELEC 0
4281 EN 62261-1 Television METADATA Part 1: Metadata dictionary structure 2006 CENELEC 04282 EN 62258-6 Semiconductor die products Part 6: Requirements for information concerning thermal simulation 2006 CENELEC 04283 EN 60454-3-12 Pressure-sensitive adhesive tapes for electrical purposes Part 3: Specifications for individual materials Sheet 12:
Requirements for polyethylene and polypropylene film tapes with pressure sensitive adhesive2006 CENELEC 0
4284 EN 60917-2-3 Modular order for the development of mechanical structures for electronic equipment practices Part 2-3: Sectionalspecification - Interface co-ordination dimensions for the 25 mm equipment practice - Extended detail specification -Dimensions for subracks
2006 CENELEC 0
4285 EN 61970-501 Energy management system application program interface (EMS-API) Part 501: Common Information Model ResourceDescription Framework (CIM RDF) schema
2006 CENELEC 0
4286 EN 60749-39 Semiconductor devices - Mechanical and climatic test methods Part 39: Measurement of moisture diffusivity and watersolubility in organic materials used for semiconductor components
2006 CENELEC 0
4287 EN 50194-2 Electrical apparatus for the detection of combustible gases in domestic premises Part 2: Electrical apparatus for continuousoperation in a fixed installation in recreational vehicles and similar premises - Additional test methods and performancerequirem
2006 CENELEC 0
4288 EN 61970-1 Energy management system application program interface (EMS-API) Part 1: Guidelines and general requirements 2006 CENELEC 04289 EN 60127-1 Miniature fuses Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links - Incorporates
Amendment A2: 20152006 CENELEC 0
4290 EN 60749-27 Semiconductor devices - Mechanical and climatic test methods Part 27: Electrostatic discharge (ESD) sensitivity testing -Machine model (MM) - Incorporates Amendment A1: 2012
2006 CENELEC 0
4291 EN 60216-3 Electrical insulating materials - Thermal endurance properties Part 3: Instructions for calculating thermal endurancecharacteristics
2006 CENELEC 0
4292 EN 62132-4 Integrated circuits - Measurement of electromagnetic immunity 150 kHz to 1 GHz Part 4: Direct RF power injectionmethod
2006 CENELEC 0
4293 EN 60669-2-3 Switches for household and similar fixed electrical installations Part 2-3: Particular requirements - Time delay switches(TDS)
2006 CENELEC 0
4294 EN 60071-1 Insulation co-ordination Part 1: Definitions, principles and rules - Incorporates Amendment A1: 2010 2006 CENELEC 04295 EN 61755-2-2 Fibre optic connector optical interfaces Part 2-2: Optical interface standard single mode angled physically contacting fibres 2006 CENELEC 04296 EN 55016-1-3 Specification for radio disturbance and immunity measuring apparatus and methods Part 1-3: Radio disturbance and
immunity measuring apparatus - Ancillary equipment - Disturbance power - Incorporates Amendment A1: 20162006 CENELEC 0
4297 EN 61267 Medical diagnostic X-ray equipment Radiation conditions for use in the determination of characteristics 2006 CENELEC 04298 EN 60318-5 Electroacoustics - Simulators of human head and ear Part 5: 2 cmآ_ coupler for the measurement of hearing aids and
earphones coupled to the ear by means of ear inserts2006 CENELEC 0
4299 EN 60384-3-1 Fixed capacitors for use in electronic equipment Part 3-1: Blank detail specification: Surface mount fixed tantalumelectrolytic capacitors with manganese dioxide solid electrolyte - Assessment level EZ - Incorporating Corrigendum April2009
2006 CENELEC 0
4300 EN 61755-2-1 Fibre optic connector optical interfaces Part 2-1: Optical interface standard single mode non-angled physically contactingfibres
2006 CENELEC 0
4301 EN 60958-3 Digital audio interface Part 3: Consumer applications - Incorporates Amendment A2: 2015 2006 CENELEC 04302 EN 60060-3 High voltage test techniques Part 3: Definitions and requirements for on-site tests - Incorporating Corrigendum October
20062006 CENELEC 0
4303 EN 60838-2-2 Miscellaneous lampholders Part 2-2: Particular requirements - Connectors for LED-modules - Incorporates AmendmentA1: 2012
2006 CENELEC 0
4304 EN 61606-4 Audio and audiovisual equipment - Digital audio parts - Basic measurement methods of audio characteristics Part 4:Personal computer
2006 CENELEC 0
4305 EN 61189-2 Test methods for electrical materials, printed boards and other interconnection structures and assemblies Part 2: Testmethods for materials for interconnection structures
2006 CENELEC 0
4306 EN 62047-2 Semiconductor devices Micro-electromechanical devices Part 2: Tensile testing method of thin film materials 2006 CENELEC 04307 EN 60512-14-4 Connectors for electronic equipment - Tests and measurements Part 14-4: Sealing tests - Test 14d: Immersion - Waterproof 2006 CENELEC 04308 EN 61966-6 Multimedia systems and equipment - Colour measurement and management Part 6: Front projection displays 2006 CENELEC 04309 EN 60034-26 Rotating electrical machines Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction
motors2006 CENELEC 0
4310 EN 60216-6 Electrical insulating materials - Thermal endurance properties Part 6: Determination of thermal endurance indices (TI andRTE) of an insulating material using the fixed time frame method
2006 CENELEC 0
4311 EN 60664-4 Insulation coordination for equipment within low-voltage systems Part 4: Consideration of high-frequency voltage stress -Incorporating Corrigendum October 2006
2006 CENELEC 0
4312 EN 60335-2-102
Household and similar electrical appliances - Safety Part 2-102: Particular requirements for gas, oil and solid-fuel burningappliances having electrical connections - Incorporates Amendment A2: 2016
2006 CENELEC 0
4313 EN 62333-1 Noise suppression sheet for digital devices and equipment Part 1: Definitions and general properties 2006 CENELEC 04314 EN 61788-3 Superconductivity Part 3: Critical current measurement - DC critical current of Ag-sheathed Bi-2212 and Bi-2223 oxide
superconductors2006 CENELEC 0
4315 EN 50428 Switches for household and similar fixed electrical installations Collateral standard Switches and related accessories for usein home and building electronic systems (HBES) - Incorporates Amendment A2: 2009; Remains Current
2005 CENELEC 0
4316 EN 50363-1 Insulating, sheathing and covering materials for low voltage energy cables Part 1: Cross-linked elastomeric insulatingcompounds
2005 CENELEC 0
4317 EN 62297-1 Triggering messages for broadcast applications Part 1: Format 2005 CENELEC 04318 EN 50363-4-1 Insulating, sheathing and covering materials for low voltage energy cables Part 4-1: PVC sheathing compounds 2005 CENELEC 04319 EN 60695-6-1 Fire hazard testing Part 6-1: Smoke obscuration General guidance - Incorporates Amendment A1: 2010 2005 CENELEC 04320 EN 62345 ID format for 50 mm magneto-optical disc system 2005 CENELEC 04321 EN 60939-2 Passive filter units for electromagnetic interference suppression Part 2: Sectional specification: Passive filter units for
which safety tests are appropriate Test methods and general requirements2005 CENELEC 0
4322 EN 60068-2-80 Environmental testing Part 2-80: Tests Test Fi: Vibration Mixed mode 2005 CENELEC 0
4323 EN 60998-2-4 Connecting devices for low voltage circuits for household and similar purposes Part 2-4: Particular requirements for twist-on connecting devices
2005 CENELEC 0
4324 EN 60335-2-58 Household and similar electrical appliances Safety Part 2-58: Particular requirements for commercial electric dishwashingmachines - Incorporates Amendment A12: 2016
2005 CENELEC 0
4325 EN 61338-4 Waveguide type dielectric resonators Part 4: Sectional specification 2005 CENELEC 04326 EN 62115 Electric toys Safety - Incorporates Amendment A12: 2015 2005 CENELEC 04327 EN 61249-2-2 Materials for printed boards and other interconnecting structures Part 2-2: Reinforced base materials, clad and unclad
Phenolic cellulose paper reinforced laminate sheets, high electrical grade, copper-clad2005 CENELEC 0
4328 EN 61034-1 Measurement of smoke density of cables burning under defined conditions Part 1: Test apparatus - IncorporatesAmendment A1: 2014
2005 CENELEC 0
4329 EN 60728-7-2 Cable networks for television signals, sound signals and interactive services Part 7-2: Hybrid Fibre Coax Outside PlantStatus Monitoring Media access Control (MAC) Layer Specification
2005 CENELEC 0
4330 EN 62298-2 Teleweb application Part 2: Delivery methods 2005 CENELEC 04331 EN 60254-1 Lead-acid traction batteries Part 1: General requirements and methods of test 2005 CENELEC 04332 EN 60068-2-30 Environmental Testing - Part 2: Tests - Test Db and Guidance: Damp Heat, Cyclic (12 + 12 Hour Cycle) 2005 CENELEC 04333 EN 61300-3-1 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 3-1:
Examinations and Measurements - Visual Examination2005 CENELEC 0
4334 EN 61243-1 Live working Voltage detectors Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. - IncorporatesAmendment A1: 2010
2005 CENELEC 0
4335 EN 61249-2-23 Materials for printed boards and other interconnecting structures Part 2-23: Reinforced base materials, clad and uncladNon-halogenated phenolic cellulose paper reinforced laminated sheets, economic grade, copper-clad
2005 CENELEC 0
4336 EN 61058-2-4 Switches for appliances Part 2-4: Particular requirements for independently mounted switches 2005 CENELEC 04337 EN 61249-2-1 Materials for printed boards and other interconnecting structures Part 2-1: Reinforced base materials, clad and unclad
Phenolic cellulose paper reinforced laminated sheets, economic grade, copper clad2005 CENELEC 0
4338 EN 60118-8 Electroacoustics Hearing aids Part 8: Methods of measurement of performance characteristics of hearing aids undersimulated in situ working conditions
2005 CENELEC 0
4339 EN 61249-2-26 Materials for printed boards and other interconnecting structures Part 2-26: Reinforced base materials, clad and uncladNon-halogenated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burningtest), copper-cla
2005 CENELEC 0
4340 EN 61754-10 Fibre Optic Connector Interfaces Part 10: Type Mini-MPO Connector Family 2005 CENELEC 04341 EN 62298-4 TeleWeb application Part 4: Hyperteletext profile 2005 CENELEC 04342 EN 62298-3 Teleweb application Part 3: Superteletext profile 2005 CENELEC 04343 EN 62053-52 Electricity metering equipment (AC) - Particular requirements Part 52: Symbols 2005 CENELEC 04344 EN 50369 Liquid tight sheathing systems for cable management 2005 CENELEC 04345 EN 60300-3-2 Dependability management Part 3-2: Application guide Collection of dependability data from the field 2005 CENELEC 04346 EN 62317-7 Ferrite cores Dimensions Part 7: EER-cores 2005 CENELEC 04347 EN 62300 Consumer audio/video equipment digital interface with plastic optical fibre 2005 CENELEC 04348 EN 61300-2-42 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-42: Tests Static
side load for connectors2005 CENELEC 0
4349 EN 60779 Industrial electroheat equipment Test methods for electroslag remelting furnaces 2005 CENELEC 04350 EN 60749-30 Semiconductor devices - Mechanical and climatic test methods Part 30: Preconditioning of non-hermetic surface mount
devices prior to reliability testing - Incorporates Amendment A1: 20112005 CENELEC 0
4351 EN 62317-4 Ferrite cores - Dimensions Part 4: RM-cores and associated parts 2005 CENELEC 04352 EN 60401-1 Terms and nomenclature for cores made of magnetically soft ferrites Part 1: Terms used for physical irregularities 2005 CENELEC 04353 EN 60728-7-1 Cable networks for television signals, sound signals and interactive services Part 7-1: Hybrid Fibre Coax Outside Plant
Status Monitoring Physical (PHY) Layer Specification - Incorporates Amendment A1: 20152005 CENELEC 0
4354 EN 61169-29 Radio-frequency connectors Part 29: Sectional specification Miniature radio frequency coaxial connectors model screw,snap-on, push-pull or quick-lock, slide-in (rack and panel applications) Characteristic impedance 50 ohms (type 1,0/2,3) 50ohms and 75 o
2005 CENELEC 0
4355 EN 61338-4-1 Waveguide type dielectric resonators Part 4-1: Blank detail specification 2005 CENELEC 04356 EN 61249-2-22 Materials for printed boards and other interconnecting structures Part 2-22: Reinforced base materials, clad and unclad
Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad
2005 CENELEC 0
4357 EN 60670-1 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 1: Generalrequirements - Incorporates Amendment A1: 2013
2005 CENELEC 0
4358 EN 60068-2-47 Environmental testing Part 2-47: Tests - Mounting of specimens for vibration, impact and similar dynamic tests 2005 CENELEC 04359 EN 61249-4-11 Materials for printed boards and other interconnecting structures Part 4-11: Sectional specification set for prepreg materials,
unclad Non-halogenated epoxide, woven E-glass prepreg of defined flammability2005 CENELEC 0
4360 EN 60669-2-4 Switches for household and similar fixed electrical installations Part 2-4: Particular requirements - Isolating switches 2005 CENELEC 04361 EN 62328-2 Multimedia home server systems Interchangeable volume/file structure adaptation for broadcasting receivers Part 2:
General recording structure2005 CENELEC 0
4362 EN 60384-17 Fixed capacitors for use in electronic equipment Part 17: Sectional specification: Fixed metallized polypropylene filmdielectric a.c. and pulse capacitors - Remains Current
2005 CENELEC 0
4363 EN 60068-2-10 Environmental testing Part 2-10: Tests Test J and guidance: Mould growth - Incorporates Amendment A1: 2018 2005 CENELEC 04364 CLC/TS 50429 Optical fibre cables Sewer cables Family specification for cables to be installed in storm and sanitary sewers 2005 CENELEC 04365 EN 50363-2-1 Insulating, sheathing and covering materials for low voltage energy cables Part 2-1: Cross-linked elastomeric sheathing
compounds - Incorporates Amendment A1: 20112005 CENELEC 0
4366 EN 61558-1 Safety of power transformers, power supplies, reactors and similar products Part 1: General requirements and tests -Incorporates Amendment A1: 2009; Incorporating corrigendum August 2006
2005 CENELEC 0
4367 EN 50290-2-1 Communication cables Part 2-1: Common design rules and construction 2005 CENELEC 04368 EN 50416 Household and similar electrical appliances Safety Particular requirements for commercial electric conveyor dishwashing
machines - Incorporates Amendment A1: 20152005 CENELEC 0
4369 EN 60684-3-216
Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 216: Heat-shrinkable, flame-retarded, limited-fire hazard sleeving - Incorporates Amendment A2: 2014
2005 CENELEC 0
4370 EN 60384-16 Fixed capacitors for use in electronic equipment Part 16: Sectional specification: Fixed metallized polypropylene filmdielectric d.c. capacitors
2005 CENELEC 0
4371 EN 60923 Auxiliaries for lamps Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements -Incorporates Amendment A1: 2006
2005 CENELEC 0
4372 EN 60336 Medical electrical equipment X-ray tube assemblies for medical diagnosis Characteristics of focal spots 2005 CENELEC 04373 EN 50363-3 Insulating, sheathing and covering materials for low voltage energy cables Part 3: PVC insulating compounds -
Incorporates Amendment A1: 20112005 CENELEC 0
4374 EN 61249-4-12 Materials for printed boards and other interconnecting structures Part 4-12: Sectional specification set for prepreg materials,unclad Non-halogenated multifunctional epoxide woven E-glass prepreg of defined flammability
2005 CENELEC 0
4375 EN 61300-2-18 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-18: Tests Dryheat High temperature endurance
2005 CENELEC 0
4376 CLC/TS 62367 Safety aspects for xDSL signals on circuits connected to telecommunication networks (DSL: Digital Subscriber Line) 2005 CENELEC 04377 EN 60216-2 Electrical insulating materials Thermal endurance properties Part 2: Determination of thermal endurance properties of
electrical insulating materials Choice of test criteria2005 CENELEC 0
4378 CLC/TS 50459-5
Railway applications Communication, signalling and processing systems European Rail Traffic Management SystemDriver-Machine Interface Part 5: Symbols
2005 CENELEC 0
4379 EN 62150-1 Fibre optic active components and devices Test and measurement procedures Part 1: General and guidance 2005 CENELEC 04380 EN 50363-8 Insulating, sheathing and covering materials for low voltage energy cables - Part 8: Halogen-free, thermoplastic sheathing
compounds - Incorporates Amendment A1: 20112005 CENELEC 0
4381 EN 50363-2-2 Insulating, sheathing and covering materials for low voltage energy cables Part 2-2: Cross-linked elastomeric coveringcompounds
2005 CENELEC 0
4382 EN 50090-5-1 Home and Building Electronic Systems (HBES) Part 5-1: Media and media dependent layers - Power line for HBES Class1
2005 CENELEC 0
4383 EN 61400-1 Wind turbines Part 1: Design requirements - Incorporates Amendment A1: 2010 2005 CENELEC 04384 EN 62061 Safety of machinery Functional safety of safety-related electrical, electronic and programmable electronic control systems -
Incorporating Corrigendum February 2010; Incorporates Amendment A2: 20152005 CENELEC 0
4385 EN 50412-2-1 Power line communication apparatus and systems used in low-voltage installations in the frequency range 1,6 MHz to 30MHz Part 2-1: Residential, commercial and industrial environment Immunity requirements
2005 CENELEC 0
4386 EN 62237 Live working Insulating hoses with fittings for use with hydraulic tools and equipment 2005 CENELEC 04387 EN 60519-3 Safety in electroheat installations Part 3: Particular requirements for induction and conduction heating and induction
melting installations2005 CENELEC 0
4388 CLC/TS 50459-4
Railway applications Communication, signalling and processing systems European Rail Traffic Management SystemDriver-Machine Interface Part 4: Data entry for the ERTMS/ETCS/GSM-R systems
2005 CENELEC 0
4389 EN 62093 Balance-of-system components for photovoltaic systems Design qualification natural environments 2005 CENELEC 04390 EN 50370-1 Electromagnetic compatibility (EMC) Product family standard for machine tools Part 1: Emission 2005 CENELEC 04391 CLC/TS 61970-
2Energy management system application program interface (EMS-API) Part 2: Glossary 2005 CENELEC 0
4392 EN 61300-3-37 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-37:Examinations and measurements Endface angle of angle-polished optical fibres - Remains Current
2005 CENELEC 0
4393 EN 60228 Conductors of insulated cables 2005 CENELEC 04394 EN 60704-2-5 Household and similar electrical appliances Test code for the determination of airborne acoustical noise Part 2-5: Particular
requirements for electric thermal storage room heaters - Incorporates Amendment A1: 20152005 CENELEC 0
4395 EN 60947-6-1 Low-voltage switchgear and controlgear Part 6-1: Multiple function equipment Transfer switching equipment -Incorporates Amendment A1: 2014
2005 CENELEC 0
4396 EN 62008 Performance characteristics and calibration methods for digital data acquisition systems and relevant software 2005 CENELEC 04397 EN 60034-9 Rotating Electrical Machines Part 9: Noise Limits - Incorporates Amendment A1: 2007 2005 CENELEC 04398 EN 61249-4-5 Materials for printed boards and other interconnecting structures Part 4-5: Sectional specification set for prepreg materials,
unclad - Polyimide, modified or unmodified, woven E-glass prepreg of defined flammability2005 CENELEC 0
4399 EN 50363-4-2 Insulating, sheathing and covering materials for low voltage energy cables Part 4-2: PVC covering compounds 2005 CENELEC 04400 EN 62298-1 Teleweb application Part 1: General description 2005 CENELEC 04401 EN 61754-22 Fibre optic connector interfaces Part 22: Type F-SMA connector family 2005 CENELEC 04402 EN 60384-2-1 Fixed capacitors for use in electronic equipment Part 2-1: Blank detail specification: Fixed metallized polyethylene-
terephthalate film dielectric d.c. capacitors Assessment levels E and EZ2005 CENELEC 0
4403 EN 50363-6 Insulating, sheathing and covering materials for low voltage energy cables Part 6: Halogen-free, cross-linked sheathingcompounds - Incorporates Amendment A1: 2011
2005 CENELEC 0
4404 EN 62025-2 High frequency inductive components Non-electrical characteristics and measuring methods Part 2: Test methods for non-electrical characteristics
2005 CENELEC 0
4405 EN 50396 Non electrical test methods for low voltage energy cables - Incorporates Amendment A1: 2011 2005 CENELEC 04406 EN 61249-4-2 Materials for printed boards and other interconnecting structures Part 4-2: Sectional specification set for prepreg materials,
unclad - Multifunctional epoxide woven E-glass prepreg of defined flammability2005 CENELEC 0
4407 EN 60308 Hydraulic turbines Testing of control systems 2005 CENELEC 04408 EN 60239 Graphite electrodes for electric arc furnaces Dimensions and designation 2005 CENELEC 04409 EN 60519-9 Safety in electroheat installations Part 9: Particular requirements for high-frequency dielectric heating installations 2005 CENELEC 04410 EN 61160 Design review 2005 CENELEC 0
4411 EN 50085-1 Cable trunking systems and cable ducting systems for electrical installations Part 1: General requirements - IncorporatesAmendment A1: 2013
2005 CENELEC 0
4412 EN 50289-1-12 Communication cables - Specifications for test methods Part 1-12: Electrical test methods - Inductance 2005 CENELEC 04413 EN 61754-21 Fibre optic connector interfaces Part 21: Type SMI connector family for plastic optical fibre 2005 CENELEC 04414 EN 61019-1 Surface acoustic wave (SAW) resonators Part 1: Generic specification 2005 CENELEC 04415 EN 50065-4-7 Signalling on lowvoltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz Part 4-
7: Portable low voltage decoupling filters - Safety requirements - Incorporating corrigendum October 20062005 CENELEC 0
4416 EN 61754-5 Fibre Optic Connector Interfaces Part 5: Type MT Connector Family 2005 CENELEC 04417 EN 50117-2-1 Coaxial cables Part 2-1: Sectional specification for cables used in cabled distribution networks Indoor drop cables for
systems operating at 5 MHz - 1 000 MHz - Incorporates Amendment A2: 20132005 CENELEC 0
4418 EN 61280-2-10 Fibre optic communication subsystem test procedures Part 2-10: Digital systems Time-resolved chirp and alpha-factormeasurement of laser transmitters
2005 CENELEC 0
4419 EN 61883-5 Consumer audio/video equipment - Digital interface Part 5: SDL-DVCR data transmission 2005 CENELEC 04420 EN 62319-1 Polymeric thermistors - Directly heated positive step function temperature coefficient Part 1: Generic specification 2005 CENELEC 04421 EN 62226-2-1 Exposure to electric or magnetic fields in the low and intermediate frequency range Methods for calculating the current
density and internal electric field induced in the human body Part 2-1: Exposure to magnetic fields 2D models2005 CENELEC 0
4422 EN 62124 Photovoltaic (PV) stand-alone systems Design verification 2005 CENELEC 04423 EN 50363-5 Insulating, sheathing and covering materials for low voltage energy cables - Part 5: Halogen-free, cross-linked insulating
compounds - Incorporates Amendment A1: 20112005 CENELEC 0
4424 EN 60512-25-7 Connectors for electronic equipment Tests and measurements Part 25-7: Test 25g Impedance, reflection coefficient andvoltage standing wave ratio (VSWR)
2005 CENELEC 0
4425 EN 61290-1-2 Optical amplifiers - Test methods Part 1-2: Power and gain parameters - Electrical spectrum analyzer method 2005 CENELEC 04426 EN 61967-2 Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz Part 2: Measurement of radiated
emissions - TEM cell and wideband TEM cell method2005 CENELEC 0
4427 EN 50395 Electrical test methods for low voltage energy cables - Incorporates Amendment A1: 2011 2005 CENELEC 04428 EN 60384-17-1 Fixed capacitors for use in electronic equipment Part 16-1: Blank detail specification: Fixed metallized polypropylene film
dielectric d.c. capacitors - Assessment levels E and EZ - Remains Current2005 CENELEC 0
4429 EN 82045-2 Document management Part 2: Metadata elements and information reference model 2005 CENELEC 04430 EN 61744 Calibration of fibre optic chromatic dispersion test sets 2005 CENELEC 04431 EN 61442 Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 36 kV (Um = 42 kV) 2005 CENELEC 04432 EN 60118-7 Electroacoustics Hearing aids Part 7: Measurement of the performance characteristics of hearing aids for production,
supply and delivery quality assurance purposes2005 CENELEC 0
4433 EN 61883-4 Consumer Audio/Video Equipment Digital Interface Part 4: MPEG2-TS Data Transmission 2005 CENELEC 04434 EN 50363-10-1 Insulating, sheathing and covering materials for low voltage energy cables Part 10-1: Miscellaneous sheathing compounds
Cross-linked polyvinyl chloride (XLPVC)2005 CENELEC 0
4435 EN 61347-2-12 Lamp controlgear Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps(excluding fluorescent lamps) - Incorporates Amendment A1: 2010
2005 CENELEC 0
4436 EN 60740-1 Laminations for transformers and inductors Part 1: Mechanical and electrical characteristics 2005 CENELEC 04437 EN 61019-2 Surface acoustic wave (SAW) resonators Part 2: Guide to the use 2005 CENELEC 04438 EN 50423-3 Overhead electrical lines exceeding AC 1 kV up to and including AC 45 kV Part 3: Set of National Normative Aspects -
Incorporating Corrigenda April 2005, February 2009, June 2010 and October 2010; Remains Current2005 CENELEC 0
4439 EN 62194 Method of evaluating the thermal performance of enclosures 2005 CENELEC 04440 EN 61988-3-1 Plasma display panels Part 3-1: Mechanical interface 2005 CENELEC 04441 EN 62055-31 Electricity metering Payment systems Part 31: Particular requirements Static payment meters for active energy (classes 1
and 2)2005 CENELEC 0
4442 EN 62319-1-1 Polymeric thermistors - Directly heated positive step function temperature coefficient Part 1-1: Blank detail specification -Current limiting application
2005 CENELEC 0
4443 EN 61754-23 Fibre optic connector interfaces Part 23: Type LX.5 connector family 2005 CENELEC 04444 EN 61290-11-2 Optical amplifiers Test methods Part 11-2: Polarization mode dispersion parameter Poincarأ_ sphere analysis method 2005 CENELEC 04445 EN 61211 Insulators of ceramic material or glass for overhead lines with a nominal voltage greater than 1 000 V Impulse puncture
testing in air2005 CENELEC 0
4446 EN 61883-3 Consumer audio/video equipment - Digital interface Part 3: HD-DVCR data transmission 2005 CENELEC 04447 EN 60335-2-76 Household and similar electrical appliances Safety Part 2-76: Particular requirements for electric fence energizers -
Incorporates Amendment A2: 20152005 CENELEC 0
4448 EN 61000-6-2 Electromagnetic compatibility (EMC) Part 6-2: Generic standards Immunity for industrial environments 2005 CENELEC 04449 EN 60384-16-1 Fixed capacitors for use in electronic equipment Part 16-1: Blank detail specification: Fixed metallized polypropylene film
dielectric d.c. capacitors - Assessment levels E and EZ2005 CENELEC 0
4450 CLC/TS 50459-6
Railway applications Communication, signalling and processing systems European Rail Traffic Management SystemDriver-Machine Interface Part 6: Audible information
2005 CENELEC 0
4451 EN 60519-8 Safety in electroheat installations Part 8: Particular requirements for electroslag remelting furnaces 2005 CENELEC 04452 EN 62274 Medical electrical equipment Safety of radiotherapy record and verify systems 2005 CENELEC 04453 CLC/TS 50431 Optical fibre cables Drinking water pipe cables Family specification for cables to be installed in drinking water pipes 2005 CENELEC 04454 EN 61215 Crystalline Silicon Terrestrial Photovoltaic (PV) Modules - Design Qualification and Type Approval - Remains Current 2005 CENELEC 04455 EN 60609-1 Hydraulic turbines, storage pumps and pump-turbines Cavitation pitting evaluation Part 1: Evaluation in reaction turbines,
storage pumps and pump-turbines2005 CENELEC 0
4456 EN 62323 Dimensions of half pot-cores made of ferrite for inductive proximity switches 2005 CENELEC 04457 EN 61360-4 Standard data element types with associated classification scheme for electric components Part 4: IEC reference collection
of standard data element types and component classes - Incorporating Corrigendum December 20052005 CENELEC 0
4458 EN 61883-2 Consumer audio/video equipment - Digital interface Part 2: SD-DVCR data transmission 2005 CENELEC 04459 EN 60255-27 Measuring relays and protection equipment Part 27: Product safety requirements 2005 CENELEC 04460 EN 60534-8-1 Industrial-process control valves Part 8-1: Noise considerations - Laboratory measurement of noise generated by
aerodynamic flow through control valves2005 CENELEC 0
4461 CLC/TS 50430 Optical fibre cables Gas pipe cables Family specification for cables to be installed in high pressure gas pipes 2005 CENELEC 04462 EN 60708 Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath - Incorporating corrigendum
August 20162005 CENELEC 0
4463 EN 60512-23-7 Connectors for electronic equipment Tests and measurements Part 23-7: Screening and filtering tests Test 23g: Effectivetransfer impedance of connectors
2005 CENELEC 0
4464 EN 61788-9 Superconductivity Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grainoxide superconductors
2005 CENELEC 0
4465 EN 60384-9-1 Fixed capacitors for use in electronic equipment Part 9-1: Blank detail specification: Fixed capacitors of ceramic dielectric,Class 2 Assessment level EZ
2005 CENELEC 0
4466 EN 61094-6 Measurement microphones Part 6: Electrostatic actuators for determination of frequency response 2005 CENELEC 04467 EN 62226-1 Exposure to electric or magnetic fields in the low and intermediate frequency range Methods for calculating the current
density and internal electric field induced in the human body Part 1: General2005 CENELEC 0
4468 EN 61034-2 Measurement of smoke density of cables burning under defined conditions Part 2: Test procedure and requirements -Incorporates Amendment A1: 2013
2005 CENELEC 0
4469 EN 62044-2 Cores made of soft magnetic materials - Measuring methods Part 2: Magnetic properties at low excitation level 2005 CENELEC 04470 EN 60534-1 Industrial-process control valves Part 1: Control valve terminology and general considerations 2005 CENELEC 04471 EN 60384-8-1 Fixed capacitors for use in electronic equipment Part 8-1: Blank detail specification: Fixed capacitors of ceramic dielectric,
Class 1 Assessment level EZ2005 CENELEC 0
4472 EN 62310-1 Static transfer systems (STS) Part 1: General and safety requirements 2005 CENELEC 0
4473 EN 62328-1 Multimedia home server systems Interchangeable volume/file structure adaptation for broadcasting receivers Part 1:General description and architecture
2005 CENELEC 0
4474 EN 50216-8 Power transformer and reactor fittings Part 8: Butterfly valves for insulating liquid circuits - Incorporates Amendment A1:2006
2005 CENELEC 0
4475 EN 61937-7 Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 7: Non-linear PCMbitstreams according to the ATRAC, ATRAC2/3 and ATRAC-X formats - Incorporates Amendment A1: 2016
2005 CENELEC 0
4476 EN 62297-2 Triggering messages for broadcast applications Part 2: Transport methods 2005 CENELEC 04477 EN 50288-7 Multi-element metallic cables used in analogue and digital communication and control Part 7: Sectional specification for
instrumentation and control cables2005 CENELEC 0
4478 EN 61162-402 Maritime navigation and radiocommunication equipment and systems Digital interfaces Part 402: Multiple talkers andmultiple listeners Ship systems interconnection Documentation and test requirements
2005 CENELEC 0
4479 EN 61338-1 Waveguide type dielectric resonators Part 1: Generic specification 2005 CENELEC 04480 EN 60384-23-1 Fixed capacitors for use in electronic equipment Part 23-1: Blank detail specification Fixed surface mount metallized
polyethylene naphthalate film dielectric DC capacitors Assessment level EZ2005 CENELEC 0
4481 EN 60645-5 Electroacoustics Audiometric equipment Part 5: Instruments for the measurement of aural acoustic impedance/admittance 2005 CENELEC 04482 EN 50363-9-1 Insulating, sheathing and covering materials for low voltage energy cables Part 9-1: Miscellaneous insulating compounds
Cross-linked polyvinyl chloride (XLPVC)2005 CENELEC 0
4483 EN 50423-2 Overhead electrical lines exceeding AC 1 kV up to and including AC 45 kV Part 2: Index of National Normative Aspects 2005 CENELEC 04484 EN 60127-4 Miniature fuses Part 4: Universal modular fuse-links (UMF) Through-hole and surface mount types - Incorporates
Amendment A2: 20132005 CENELEC 0
4485 EN 60873-2 Electrical and pneumatic analogue chart recorders for use in industrial process control systems Part 2: Guidance forinspection and routine testing
2004 CENELEC 0
4486 EN 50117-2-3 Coaxial cables Part 2-3: Sectional specification for cables used in cabled distribution networks Distribution and trunkcables for systems operating at 5 MHz - 1 000 MHz - Incorporates Amendment A2: 2013
2004 CENELEC 0
4487 EN 61360-5 Standard data element types with associated classification scheme for electric components Part 5: Extensions to theEXPRESS dictionary schema
2004 CENELEC 0
4488 EN 60684-3-165
Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 165: Extruded polyolefin, flameretarded, limited fire hazard sleeving
2004 CENELEC 0
4489 EN 61223-3-5 Evaluation and routine testing in medical imaging departments Part 3-5: Acceptance tests Imaging performance ofcomputed tomography X-ray equipment
2004 CENELEC 0
4490 EN 50163 Railway applications - Supply voltages of traction systems - Incorporates Amendment A1: 2007; Incorporating corrigendaMay 2010 and January 2013
2004 CENELEC 0
4491 EN 50065-4-6 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 4-6: Low voltagedecoupling filters Phase coupler
2004 CENELEC 0
4492 EN 50406-2 End user multi-pair cables used in high bit rate telecommunication networks Part 2: Duct and buried cables 2004 CENELEC 04493 EN 60115-9-1 Fixed resistors for use in electronic equipment Part 9-1: Blank detail specification - Fixed surface mount resistor networks
with individually measurable resistors - Assessment level EZ2004 CENELEC 0
4494 EN 60998-2-3 Connecting Devices for Low-Voltage Circuits for Household and Similar Purposes - Part 2-3: Particular Requirements forConnecting Devices as Separate Entities with Insulation Piercing Clamping Units
2004 CENELEC 0
4495 EN 50134-5 Alarm systems Social alarm systems Part 5: Interconnections and communications 2004 CENELEC 04496 EN 60076-11 Power transformers Part 11: Dry-type transformers 2004 CENELEC 04497 EN 61386-22 Conduit systems for cable management Part 22: Particular requirements Pliable conduit systems - Incorporates Amendment
A11: 20102004 CENELEC 0
4498 EN 61076-2-103
Connectors for electronic equipment Part 2-103: Circular connectors Detail specification for a range of multipoleconnectors (type آ_XLRآ_)
2004 CENELEC 0
4499 EN 50308 Wind turbines Protective measures Requirements for design, operation and maintenance - Incorporating CorrigendumFebruary 2005
2004 CENELEC 0
4500 EN 50377-9-2 Connector sets and interconnect components to be used in optical fibre communication systems Product specifications Part9-2: Type MT-RJ terminated on IEC 60793-2 category B1.1 singlemode fibre
2004 CENELEC 0
4501 EN 62270 Hydroelectric power plant automation - Guide for computer-based control 2004 CENELEC 04502 EN 62052-21 Electricity metering equipment (a.c.) - General requirements, tests and test conditions Part 21: Tariff and load control
equipment - Incorporates Amendment A1: 20172004 CENELEC 0
4503 EN 60749-33 Semiconductor devices Mechanical and climatic test methods Part 33: Accelerated moisture resistance Unbiased autoclave 2004 CENELEC 04504 EN 50090-4-2 Home and Building Electronic Systems (HBES) Part 4-2: Media independent layers - Transport layer, network layer and
general parts of data link layer for HBES Class 12004 CENELEC 0
4505 EN 60939-2-1 Complete filter units for radio interference suppression Part 2-1: Blank detail specification Passive filter units forelectromagnetic interference suppression Filters for which safety tests are required (assessment level D/DZ)
2004 CENELEC 0
4506 EN 60806 Determination of the maximum symmetrical radiation field from a rotating anode X-ray tube for medical diagnosis 2004 CENELEC 04507 EN 60372 Locking devices for ball and socket couplings of string insulator units Dimensions and tests 2004 CENELEC 04508 EN 50290-1-2 Communication cables Part 1-2: Definitions 2004 CENELEC 04509 EN 50377-7-1 Connector sets and interconnect components to be used in optical fibre communication systems Product specifications Part
7-1: Type LC-PC duplex terminated on IEC 60793-2 category A1a and A1b multimode fibre2004 CENELEC 0
4510 EN 62054-21 Electricity metering (AC) - Tariff and load control - Part 21: Particular requirements for time switches - IncorporatesAmendment A1: 2017
2004 CENELEC 0
4511 EN 50090-5-2 Home and Building Electronic Systems (HBES) Part 5-2: Media and media dependent layers - Network based on HBESClass 1, Twisted Pair
2004 CENELEC 0
4512 EN 60846 Radiation protection instrumentation Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, Xand gamma radiation
2004 CENELEC 0
4513 EN 62330-2 Helical-scan digital video cassette recording system using 12,65 mm (0,5 in) magnetic tape - Format HD-D5 Part 2:Compression format
2004 CENELEC 0
4514 EN 60893-1 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 1:Definitions, designations and general requirements
2004 CENELEC 0
4515 EN 50090-4-1 Home and Building Electronic Systems (HBES) Part 4-1: Media independent layers Application layer for HBES Class 1 2004 CENELEC 04516 EN 61164 Reliability growth - Statistical test and estimation methods 2004 CENELEC 04517 EN 60332-1-2 Tests on electric and optical fibre cables under fire conditions Part 1-2: Test for vertical flame propagation for a single
insulated wire or cable - Procedure for 1 kW pre-mixed flame - Incorporates Amendment A11: 20162004 CENELEC 0
4518 EN 60761-2 Equipment for continuous monitoring radioactivity in gaseous effluents Part 2: Specific requirements for aerosols monitorsincluding transuranic aerosols
2004 CENELEC 0
4519 EN 60447 Basic and safety principles for man-machine interface, marking and identification Actuating principles 2004 CENELEC 04520 EN 62330-1 Helical-scan digital video cassette recording system using 12,65 mm (0,5 in) magnetic tape - Format HD-D5 Part 1: VTR
specifications2004 CENELEC 0
4521 EN 50289-1-13 Communication cables Specifications for test methods Part 1-13: Electrical test methods Coupling attenuation or screeningattenuation of patch cords / coaxial cable assemblies / pre-connectorised cables
2004 CENELEC 0
4522 EN 50090-3-2 Home and Building Electronic Systems (HBES) Part 3-2: Aspects of application - User process for HBES Class 1 2004 CENELEC 04523 EN 50090-7-1 Home and Building Electronic Systems (HBES) Part 7-1: System management - Management procedures 2004 CENELEC 04524 EN 60317-22 Specifications for particular types of winding wires Part 22 : Polyester or polyesterimide enamelled round copper wire
overcoated with polyamide, class 180 - Incorporates Amendment A1: 20102004 CENELEC 0
4525 EN 61000-4-11 Electromagnetic compatibility (EMC) Part 4-11: Testing and measurement techniques - Voltage dips, short interruptionsand voltage variations immunity tests
2004 CENELEC 0
4526 EN 62148-12 Fibre optic active components and devices - Package and interface standards Part 12: Laser transmitters with coaxial RFconnector
2004 CENELEC 0
4527 EN 60371-2 Specification for insulating materials based on mica - Part 2: Methods of test 2004 CENELEC 04528 EN 61747-2-2 Liquid crystal display devices Part 2-2: Matrix colour LCD modules - Blank detail specification 2004 CENELEC 0
4529 EN 62356-2 Video recording 12,65 mm type D-11 format Part 2: Picture compression and data stream 2004 CENELEC 04530 EN 60480 Guidelines for the checking and treatment of sulfur hexafluoride (SF6 ) taken from electrical equipment and specification
for its re-use2004 CENELEC 0
4531 EN 62005-7 Reliability of fibre optic interconnecting devices and passive optical components Part 7: Life stress modeling 2004 CENELEC 04532 EN 50090-9-1 Home and Building Electronic Systems (HBES) Part 9-1: Installation requirements - Generic cabling for HBES Class 1
Twisted Pair2004 CENELEC 0
4533 CLC/TR 50373 Wind turbines Electromagnetic compatibility 2004 CENELEC 04534 EN 50377-7-3 Connector sets and interconnect components to be used in optical fibre communication systems Product specifications Part
7-3: Type LC-APC duplex terminated on IEC 60793-2 category B1.1 singlemode fibre2004 CENELEC 0
4535 EN 61753-053-3
Fibre optic interconnecting devices and passive components performance standard Part 053-3: Continuously variableattenuators for category U - Uncontrolled environment
2004 CENELEC 0
4536 EN 60761-1 Equipment for continuous monitoring radioactivity in gaseous effluents Part 1: General requirements 2004 CENELEC 04537 EN 62252 Maritime navigation and radiocommunication equipment and systems Radar for craft not in compliance with IMO SOLAS
Chapter V Performance requirements, methods of test and required test results2004 CENELEC 0
4538 EN 60297-3-103
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series Part3-103: Keying and alignment pin
2004 CENELEC 0
4539 EN 62356-1 Video recording 12,65 mm TYPE D-11 format Part 1: Tape recording 2004 CENELEC 04540 EN 61337-2 Filters using waveguide type dielectric resonators Part 2: Guidance for use 2004 CENELEC 04541 EN 60534-5 Industrial-process control valves Part 5: Marking 2004 CENELEC 04542 EN 50350 Charging control systems for household electric room heating of the storage type Methods for measuring performance 2004 CENELEC 04543 EN 50289-3-10 Communication cables Specifications for tests methods Part 3-10: Mechanical test methods Torsion and twisting 2004 CENELEC 04544 EN 60335-2-29 Household and similar electrical appliances Safety Part 2-29: Particular requirements for battery chargers - Incorporates
Amendment A2: 20102004 CENELEC 0
4545 EN 60749-23 Semiconductor devices Mechanical and climatic test methods Part 23: High temperature operating life - IncorporatesAmendment A1: 2011
2004 CENELEC 0
4546 EN 61386-23 Conduit systems for cable management Part 23: Particular requirements Flexible conduit systems - IncorporatingCorrigendum April 2004; Incorporates Amendment A11: 2010
2004 CENELEC 0
4547 EN 60893-2 Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 2: Methodsof test
2004 CENELEC 0
4548 EN 60332-2-2 Tests on electric and optical fibre cables under fire conditions Part 2-2: Test for vertical flame propagation for a singlesmall insulated wire or cable - Procedure for diffusion flame
2004 CENELEC 0
4549 EN 60893-3-6 Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-6:Specifications for individual materials Requirements for rigid laminated sheets based on silicone resins - IncorporatesAmendment A1: 20
2004 CENELEC 0
4550 EN 62153-1-1 Metallic communication cables test methods Part 1-1: Electrical Measurement of the pulse/step return loss in the frequencydomain using the Inverse Discrete Fourier Transformation (IDFT)
2004 CENELEC 0
4551 EN 175101-809 Detail specification: Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance withCECC 75 101-801, with assessed quality
2004 CENELEC 0
4552 EN 60115-9 Fixed resistors for use in electronic equipment Part 9: Sectional specification - Fixed surface mount resistor networks withindividually measurable resistors
2004 CENELEC 0
4553 EN 60761-5 Equipment for continuous monitoring radioactivity in gaseous effluents Part 5: Specific requirements for tritium monitors 2004 CENELEC 04554 EN 50172 Emergency escape lighting systems 2004 CENELEC 04555 EN 60761-3 Equipment for continuous monitoring radioactivity in gaseous effluents Part 3: Specific requirements for radioactive noble
gas monitors2004 CENELEC 0
4556 EN 61047 DC or AC supplied electronic step-down convertors for filament lamps - Performance requirements 2004 CENELEC 04557 EN 60747-16-4 Semiconductor devices Part 16-4: Microwave integrated circuits - Switches - Incorporates Amendment A2: 2017 2004 CENELEC 0
4558 EN 60873-1 Electrical and pneumatic analogue chart recorders for use in industrial-process control systems Part 1: Methods forperformance evaluation
2004 CENELEC 0
4559 EN 60749-24 Semiconductor devices Mechanical and climatic test methods Part 24: Accelerated moisture resistance Unbiased HAST 2004 CENELEC 04560 EN 50289-1-14 Communication cables Specifications for test methods Part 1-14: Electrical test methods Coupling attenuation or screening
attenuation of connecting hardware2004 CENELEC 0
4561 EN 61386-21 Conduit systems for cable management Part 21: Particular requirements Rigid conduit systems - IncorporatingCorrigendum April 2004; Incorporates Amendment A11: 2010
2004 CENELEC 0
4562 EN 50289-4-12 Communication cables Specifications for test methods Part 4-12: Environmental test methods Vertical flame spread test onbunched small communication cables
2004 CENELEC 0
4563 EN 60399 Barrel thread for lampholders with shade holder ring - Incorporates Amendment A1: 2008 2004 CENELEC 04564 EN 60526 High-voltage cable plug and socket connections for medical X-ray equipment 2004 CENELEC 04565 EN 60893-3-4 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-4:
Specifications for individual materials Requirements for rigid laminated sheets based on phenolic resins - IncorporatesAmendment A1:
2004 CENELEC 0
4566 EN 60684-3-228
Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 228: Heat-shrinkable, semi-rigidpolyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1
2004 CENELEC 0
4567 EN 61338-2 Waveguide type dielectric resonators Part 2: Guidelines for oscillator and filter applications 2004 CENELEC 04568 EN 60669-2-1 Switches for household and similar fixed electrical installations Part 2-1: Particular requirements Electronic switches -
Incorporating corrigendum December 2007; Incorporates Amendment A12: 20102004 CENELEC 0
4569 EN 50117-2-2 Coaxial cables Part 2-2: Sectional specification for cables used in cabled distribution networks Outdoor drop cables forsystems operating at 5 MHz - 1000 MHz - Incorporates Amendment A2: 2013
2004 CENELEC 0
4570 EN 60825-2 Safety of laser products Part 2: Safety of optical fibre communication systems (OFCS) - Incorporates Amendment A2:2010
2004 CENELEC 0
4571 EN 60332-2-1 Tests on electric and optical fibre cables under fire conditions Part 2-1: Test for vertical flame propagation for a singlesmall insulated wire or cable Apparatus
2004 CENELEC 0
4572 EN 55016-2-4 Specification for radio disturbance and immunity measuring apparatus and methods Part 2-4: Methods of measurement ofdisturbances and immunity Immunity measurements
2004 CENELEC 0
4573 EN 61086-2 Coatings for loaded printed wire boards (conformal coatings) Part 2: Methods of test - Incorporating Corrigendum January2005
2004 CENELEC 0
4574 EN 60335-2-75 Household and similar electrical appliances Safety Part 2-75: Particular requirements for commercial dispensing appliancesand vending machines - Incorporates Amendments A11: 2006, A2: 2008 and A12: 2010
2004 CENELEC 0
4575 EN 60034-14 Rotating electrical machines Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higherMeasurement, evaluation and limits of vibration severity - Incorporates Amendment A1: 2007
2004 CENELEC 0
4576 EN 60893-3-5 Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-5:Specifications for individual materials Requirements for rigid laminated sheets based on polyester resins - IncorporatesAmendment A1: 2
2004 CENELEC 0
4577 EN 50377-7-2 Connector sets and interconnect components to be used in optical fibre communication systems Product specifications Part7-2: LC-PC duplex terminated on IEC 60793-2 category B1.1 singlemode fibre
2004 CENELEC 0
4578 EN 61221 Petroleum products and lubricants Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications 2004 CENELEC 04579 EN 62153-4-2 Metallic communication cables test methods Part 4-2: Electromagnetic compatibility (EMC) Screening and coupling
attenuation Injection clamp method2004 CENELEC 0
4580 EN 60896-21 Stationary lead-acid batteries Part 21: Valve regulated types Methods of test 2004 CENELEC 04581 EN 60939-2-2 Complete filter units for radio interference suppression Part 2-2: Blank detail specification Passive filter units for
electromagnetic interference suppression Filters for which safety tests are required (safety tests only)2004 CENELEC 0
4582 EN 61340-4-1 Electrostatics Part 4-1: Standard test methods for specific applications - Electrical resistance of floor coverings and installedfloors - Incorporates Amendment A1: 2015
2004 CENELEC 0
4583 EN 60444-7 Measurement of quartz crystal unit parameters Part 7: Measurement of activity and frequency dips of quartz crystal units 2004 CENELEC 0
4584 EN 50406-1 End user multi-pair cables used in high bit rate telecommunication networks Part 1: Aerial cables 2004 CENELEC 04585 EN 61920 Infrared free air applications 2004 CENELEC 04586 EN 60774-5 Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS Part 5: D-VHS 2004 CENELEC 04587 EN 60384-22-1 Fixed capacitors for use in electronic equipment Part 22-1: Blank detail specification: Fixed surface mount multilayer
capacitors of ceramic dielectric, Class 2 Assessment level EZ2004 CENELEC 0
4588 EN 50289-1-15 Communication cables Specifications for test methods Part 1-15: Electromagnetic performance Coupling attenuation oflinks and channels (Laboratory conditions)
2004 CENELEC 0
4589 EN 61076-7-001
Connectors for electronic equipment Part 7-001: Cable outlet accessories Blank detail specification 2004 CENELEC 0
4590 EN 60539-2 Directly heated negative temperature coefficient thermistors Part 2: Sectional specification - Surface mount negativetemperature coefficient thermistors - Incorporates Amendment A1: 2010
2004 CENELEC 0
4591 EN 61108-4 Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) Part 4:Shipborne DGPS and DGLONASS maritime radio beacon receiver equipment Performance requirements, methods oftesting and required test resul
2004 CENELEC 0
4592 EN 50117-2-4 Coaxial cables Part 2-4: Sectional specification for cables used in cabled distribution networks - Indoor drop cables forsystems operating at 5 MHz - 3 000 MHz - Incorporates Amendment A2: 2013
2004 CENELEC 0
4593 EN 62356-3 Video recording 12,65 mm type D-11 format Part 3: Data mapping over SDTI 2004 CENELEC 04594 EN 45510-2-8 Guide for procurement of power station equipment - Part 2-8: Electrical equipment - Power cables 2004 CENELEC 04595 EN 60247 Insulating liquids Measurement of relative permittivity, dielectric dissipation factor (tan $) and d.c. resistivity 2004 CENELEC 04596 EN 61603-8-1 Transmission of audio and/or video and related signals using infrared radiation Part 8-1: Digital audio and related signals 2004 CENELEC 04597 EN 60761-4 Equipment for continuous monitoring radioactivity in gaseous effluents Part 4: Specific requirements for iodine monitors 2004 CENELEC 04598 EN 60998-2-2 Connecting devices for low-voltage circuits for household and similar purposes Part 2-2: Particular requirements for
connecting devices as separate entities with screwless-type clamping units2004 CENELEC 0
4599 EN 88528-11 Reciprocating internal combustion engine driven alternating current generating sets Part 11: Rotary uninterruptible powersystems - Performance requirements and test methods
2004 CENELEC 0
4600 CLC/TR 50426 Assessment of inadvertent initiation of bridge wire electro-explosive devices by radio-frequency radiation Guide 2004 CENELEC 04601 EN 62028 General methods of measurement for digital television receivers 2004 CENELEC 04602 EN 62309 Dependability of products containing reused parts Requirements for functionality and tests 2004 CENELEC 04603 EN 61337-1 Filters using waveguide type dielectric resonators Part 1: Generic specification 2004 CENELEC 04604 EN 61753-061-
3Fibre optic interconnecting devices and passive components performance standard Part 061-3: Single mode fibre opticpigtailed style isolators for category U Uncontrolled environment
2004 CENELEC 0
4605 EN 61959 Secondary cells and batteries containing alkaline or other non-acid electrolytes Mechanical tests for sealed portablesecondary cells and batteries - Incorporating Corrigendum June 2004
2004 CENELEC 0
4606 EN 61753-091-3
Fibre optic interconnecting devices and passive components performance standard Part 091-3: Single mode fibre opticpigtailed style circulators for category U Uncontrolled environment
2004 CENELEC 0
4607 EN 50390 Space product assurance The manual soldering of high-reliability electrical connections 2004 CENELEC 04608 EN 60317-18 Specifications for particular types of winding wires Part 18 : Polyvinyl acetal enamelled rectangular copper wire, class 120
- Incorporates Amendment A1: 20102004 CENELEC 0
4609 EN 60325 Radiation protection instrumentation - Alpha, beta and alpha/beta (beta energy > 60 keV) contamination meters andmonitors
2004 CENELEC 0
4610 EN 60332-1-1 Tests on electric and optical fibre cables under fire conditions Part 1-1: Test for vertical flame propagation for a singleinsulated wire or cable - Apparatus - Incorporates Amendment A1: 2015
2004 CENELEC 0
4611 EN 61196-4 Coaxial communication cables Part 4: Sectional specification for radiating cables 2004 CENELEC 04612 EN 60317-15 Specifications for particular types of winding wires Part 15: Polyesterimide enamelled round aluminium wire, class 180 -
Incorporates Amendment A1: 20102004 CENELEC 0
4613 EN 60747-16-10
Semiconductor devices Part 16-10: Technology Approval Schedule (TAS) for monolithic microwave integrated circuits 2004 CENELEC 0
4614 EN 60893-3-7 Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-7:Specifications for individual materials Requirements for rigid laminated sheets based on polyimide resins - IncorporatesAmendment A1: 2
2004 CENELEC 0
4615 EN 62054-11 Electricity metering (a.c.) - Tariff and load control Part 11: Particular requirements for electronic ripple control receivers -Incorporates Amendment A1: 2017
2004 CENELEC 0
4616 EN 61290-5-2 Optical amplifiers Test methods Part 5-2: Reflectance parameters Electrical spectrum analyser method 2004 CENELEC 04617 EN 60893-3-2 Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-2:
Specifications for individual materials Requirements for rigid laminated sheets based on epoxy resins - IncorporatesAmendment A1: 2011
2004 CENELEC 0
4618 EN 50117-2-5 Coaxial cables Part 2-5: Sectional specification for cables used in cabled distribution networks آ_ Outdoor drop cables forsystems operating at 5 MHz - 3 000 MHz - Incorporates Amendment A2: 2013
2004 CENELEC 0
4619 CLC/TS 50349 Qualification of electrical installation contractors 2004 CENELEC 04620 EN 60896-22 Stationary lead-acid batteries Part 22: Valve regulated types Requirements 2004 CENELEC 04621 EN 62286 Service diagnostic interface for consumer electronics products and networks Implementation for IEEE 1394 2004 CENELEC 04622 EN 62259 Secondary cells and batteries containing alkaline or other non-acid electrolytes Nickel-cadmium prismatic secondary single
cells with partial gas recombination2004 CENELEC 0
4623 EN 60641-2 Pressboard and presspaper for electrical purposes Part 2: Methods of tests 2004 CENELEC 04624 EN 61076-3-
103Connectors for electronic equipment Part 3-103: Rectangular connectors Detail specification for single row connectors withnon-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC)
2004 CENELEC 0
4625 EN 60652 Loading tests on overhead line structures 2004 CENELEC 04626 EN 61966-9 Multimedia systems and equipment Colour measurement and management Part 9: Digital cameras 2004 CENELEC 04627 EN 60893-3-3 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-3:
Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins - IncorporatesAmendment A1
2004 CENELEC 0
4628 EN 62330-3 Helical-scan digital video cassette recording system using 12,65 mm (0,5 in) magnetic tape - Format HD-D5 Part 3: Datastream format
2004 CENELEC 0
4629 EN 60300-3-14 Dependability management Part 3-14: Application guide - Maintenance and maintenance support 2004 CENELEC 04630 EN 60450 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating
materials - Incorporates Amendment A1: 20072004 CENELEC 0
4631 EN 60300-3-1 Dependability management Part 3-1: Application guide Analysis techniques for dependability Guide on methodology 2004 CENELEC 04632 EN 60297-3-
101Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series Part3-101: Subracks and associated plug-in units
2004 CENELEC 0
4633 EN 60998-1 Connecting devices for low-voltage circuits for household and similar purposes Part 1: General requirements 2004 CENELEC 04634 EN 62011-2 Insulating materials Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based
on thermosetting resins for electrical purposes Part 2: Methods of test2004 CENELEC 0
4635 EN 62375 Video systems (625/50 progressive) Video and accompanied data using the vertical blanking interval - Analogue interface 2004 CENELEC 04636 EN 60998-2-1 Connecting Devices for Low Voltage Circuits for Household and Similar Purposes Part 2-1: Particular Requirements for
Connecting Devices as Separate Entities with Screw-Type Clamping Units2004 CENELEC 0
4637 EN 60286-6 Packaging of components for automatic handling Part 6: Bulk case packaging for surface mounting components 2004 CENELEC 04638 EN 50394-1 Electrical apparatus for potentially explosive atmospheres Group I Intrinsically safe systems Part 1: Construction and
testing2004 CENELEC 0
4639 EN 50162 Protection against corrosion by stray current from direct current systems 2004 CENELEC 04640 EN 61086-3-1 Coatings for loaded printed wire boards (conformal coatings) Part 3-1: Specifications for individual materials - Coatings for
general purpose (Class 1), high reliability (Class 2) and aerospace (Class 3)2004 CENELEC 0
4641 EN 60297-3-102
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series Part3-102: Injector/extractor handle
2004 CENELEC 0
4642 EN 61747-4-1 Liquid crystal display devices Part 4-1: Matrix colour LCD modules Essential ratings and characteristics 2004 CENELEC 04643 EN 60921 Ballasts for tubular fluorescent lamps - Performance requirements - Incorporates Amendment A1: 2006 2004 CENELEC 04644 EN 60332-1-3 Tests on electric and optical fibre cables under fire conditions Part 1-3: Test for vertical flame propagation for a single
insulated wire or cable - Procedure for determination of flaming droplets/particles - Incorporates Amendment A1: 20152004 CENELEC 0
4645 EN 60384-21-1 Fixed capacitors for use in electronic equipment Part 21-1: Blank detail specification: Fixed surface mount multilayercapacitors of ceramic dielectric, Class 1 Assessment level EZ
2004 CENELEC 0
4646 EN 60379 Methods for measuring the performance of electric storage water-heaters for household purposes 2004 CENELEC 04647 EN 60825-12 Safety of laser products Part 12: Safety of free space optical communication systems used for transmission of information 2004 CENELEC 04648 EN 60512-25-5 Connectors for electronic equipment Tests and measurements Part 25-5: Test 25e Return loss 2004 CENELEC 04649 EN 50407-1 Multi-pair cables used in high bit rate digital access telecommunication networks Part 1: Outdoor cables 2004 CENELEC 04650 CLC/TS 60034-
20-1Rotating electrical machines Part 20-1: Control motors - Stepping motors 2004 CENELEC 0
4651 EN 60034-11 Rotating electrical machines - Part 11: Thermal protection 2004 CENELEC 04652 EN 60512-25-6 Connectors for electronic equipment - Tests and measurements Part 25-6: Test 25f: Eye pattern and jitter 2004 CENELEC 04653 EN 61006 Electrical insulating materials Methods of test for the determination of the glass transition temperature 2004 CENELEC 04654 CLC/TR 50427 Assessment of inadvertent ignition of flammable atmospheres by radio-frequency radiation Guide 2004 CENELEC 04655 EN 61549 Miscellaneous Lamps - Incorporates Amendment A3: 2012 2003 CENELEC 04656 EN 61883-7 Consumer audio/video equipment Digital interface Part 7: Transmission of ITU-R BO.1294 System B 2003 CENELEC 04657 EN 60512-11-
14Connectors for electronic equipment Tests and measurements Part 11-14: Climatic tests Test 11p: Flowing single gascorrosion test
2003 CENELEC 0
4658 EN 60335-2-61 Household and similar electrical appliances - Safety Part 2-61: Particular requirements for thermal-storage room heaters -Incorporates Amendment A2: 2003
2003 CENELEC 0
4659 EN 60077-5 Railway applications - Electrotechnical equipment for rolling stock Part 5: Electrotechnical components - Rules for HVfuses
2003 CENELEC 0
4660 EN 60335-2-55 Household and similar electrical appliances Safety Part 2-55: Particular requirements for electrical appliances for use withaquariums and garden ponds - Incorporates Amendment A1: 2008
2003 CENELEC 0
4661 EN 60335-2-12 Household and similar electrical appliances - Safety Part 2-12: Particular requirements for warming plates and similarappliances - Incorporates Amendment A1: 2008
2003 CENELEC 0
4662 EN 62289 Helical-scan digital video cassette recording format using 12,65 mm magnetic tape and incorporating MPEG-2compression Format D-10
2003 CENELEC 0
4663 EN 50238-1 Railway applications Compatibility between rolling stock and train detection systems Part 1: General - Incorporatingcorrigendum May 2010
2003 CENELEC 0
4664 EN 50327 Railway applications Fixed installations Harmonisation of the rated values for converter groups and tests on convertergroups - Incorporates Amendment A1: 2005
2003 CENELEC 0
4665 EN 61188-5-2 Printed boards and printed board assemblies Design and use Part 5-2: Attachment (land/joint) considerations Discretecomponents
2003 CENELEC 0
4666 EN 50065-2-1 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 2-1: Immunityrequirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHzand intended for use in r
2003 CENELEC 0
4667 EN 60357 Tungsten halogen lamps (non-vehicle) - Performance specifications - Incorporates Amendment A11: 2016 2003 CENELEC 04668 EN 60947-5-4 Low-voltage switchgear and controlgear Part 5-4: Control circuit devices and switching elements - Method of assessing the
performance of low-energy contacts - Special tests2003 CENELEC 0
4669 EN 61076-4-114
Connectors for electronic equipment Part 4-114: Printed board connectors Detail specification for two-part connector withintegrated shielding function having a grid of 1 mm x 1,5 mm
2003 CENELEC 0
4670 EN 61192-1 Workmanship requirements for soldered electronic assemblies Part 1: General 2003 CENELEC 04671 EN 60455-3-3 Resin based reactive compounds used for electrical insulation Part 3: Specifications for individual materials Sheet 3:
Unfilled polyurethane compounds2003 CENELEC 0
4672 EN 60999-2 Connecting devices Electrical copper conductors Safety requirements for screw-type and screwless-type clamping unitsPart 2: Particular requirements for clamping units for conductors above 35 mm up to 300 mm (included)
2003 CENELEC 0
4673 EN 60749-31 Semiconductor devices - Mechanical and climatic test methods Part 31: Flammability of plastic-encapsulated devices(internally induced)
2003 CENELEC 0
4674 EN 50288-4-1 Multi-element metallic cables used in analogue and digital communication and control Part 4-1: Sectional specification forscreened cables characterised up to 600 MHz - Horizontal and building backbone cables
2003 CENELEC 0
4675 EN 45502-2-1 Active implantable medical devices Part 2-1: Particular requirements for active implantable medical devices intended totreat bradyarrhythmia (cardiac pacemakers)
2003 CENELEC 0
4676 EN 61000-2-12 Electromagnetic compatibility (EMC) Part 2-12: Environment Compatibility levels for low-frequency conducteddisturbances and signalling in public medium-voltage power supply systems
2003 CENELEC 0
4677 EN 60534-2-5 Industrial-process control valves Part 2-5: Flow capacity Sizing equations for fluid flow through multistage control valveswith interstage recovery
2003 CENELEC 0
4678 EN 60335-2-52 Household and similar electrical appliances Safety Part 2-52: Particular requirements for oral hygiene appliances -Incorporates Amendment A11: 2010; Incorporating corrigendum June 2012
2003 CENELEC 0
4679 EN 60268-5 Sound system equipment Part 5: Loudspeakers - Incorporates Amendment A1: 2009 2003 CENELEC 04680 EN 60749-18 Semiconductor devices - Mechanical and climatic test methods Part 18: Ionizing radiation (total dose) 2003 CENELEC 04681 EN 60335-2-26 Household and similar electrical appliances - Safety Part 2-26: Particular requirements for clocks - Incorporates
Amendment A1: 20082003 CENELEC 0
4682 EN 61249-2-21 Materials for printed boards and other interconnecting structures Part 2-21: Reinforced base materials, clad and uncladNon-halogenated epoxide woven E-glass reinforced laminated sheets of defined flammability (vertical burning test),copper-clad
2003 CENELEC 0
4683 EN 50289-3-15 Communication cables Specifications for test methods Part 3-15: Mechanical test methods Underwater cable resistance tohydrostatic pressure
2003 CENELEC 0
4684 EN 50289-4-14 Communication cables Specifications for test methods Part 4-14: Environmental test methods Lightning 2003 CENELEC 04685 EN 61921 Power capacitors Low-voltage power factor correction banks 2003 CENELEC 04686 EN 60749-36 Semiconductor devices Mechanical and climatic test methods Part 36: Acceleration, steady state 2003 CENELEC 04687 EN 60335-2-56 Household and similar electrical appliances - Safety Part 2-56: Particular requirements for projectors and similar appliances
- Incorporates Amendment A2: 20142003 CENELEC 0
4688 EN 61305-5 Household high-fidelity audio equipment and systems Methods of measuring and specifying the performance Part 5:Loudspeakers
2003 CENELEC 0
4689 EN 60749-25 Semiconductor devices Mechanical and climatic test methods Part 25: Temperature cycling 2003 CENELEC 04690 EN 62011-3-1 Insulating materials - Industrial rigid moulded laminated tubes and rods of rectangular and hexagonal cross-section based
on thermosetting resins for electrical purposes Part 3-1: Specifications for individual materials - Tubes and rods ofrectangular and
2003 CENELEC 0
4691 EN 61290-10-3 Optical amplifiers Test methods Part 10-3: Multichannel parameters Probe methods 2003 CENELEC 04692 EN 60454-3-19 Pressure-sensitive adhesive tapes for electrical purposes Part 3: Specifications for individual materials Sheet 19: Tapes
made from various backing materials with pressure-sensitive adhesive on both sides2003 CENELEC 0
4693 EN 61937-4 Digital audio Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 4: Non-linear PCMbitstreams according to the MPEG audio format
2003 CENELEC 0
4694 EN 60695-5-1 Fire hazard testing Part 5-1: Corrosion damage effects of fire effluent - General guidance 2003 CENELEC 04695 EN 60335-2-40 Household and similar electrical appliances - Safety Part 2-40: Particular requirements for electrical heat pumps, air-
conditioners and dehumidifiers - Incorporating Corrigenda April 2006, August 2010 and August 2013; IncorporatesAmendment A13: 2012
2003 CENELEC 0
4696 EN 62148-6 Fibre optic active components and devices Package and interface standards Part 6: ATM-PON transceivers 2003 CENELEC 0
4697 EN 60966-4-1 Radio frequency and coaxial cable assemblies Part 4-1: Blank detail specification for semi-rigid coaxial cable assemblies 2003 CENELEC 04698 EN 50123-7-3 Railway applications Fixed installations D.C. switchgear Part 7-3: Measurement, control and protection devices for specific
use in d.c. traction systems Isolating voltage transducers and other voltage measuring devices2003 CENELEC 0
4699 EN 50125-3 Railway applications - Environmental conditions for equipment Part 3: Equipment for signalling and telecommunications -Incorporating corrigendum May 2010
2003 CENELEC 0
4700 EN 50238 Railway applications Compatibility between rolling stock and train detection systems - Incorporating Corrigendum May2010
2003 CENELEC 0
4701 EN 61192-2 Workmanship requirements for soldered electronic assemblies Part 2: Surface-mount assemblies 2003 CENELEC 04702 EN 60335-2-80 Household and similar electrical appliances - Safety Part 2-80: Particular requirements for fans - Incorporates Amendment
A2: 20092003 CENELEC 0
4703 EN 60335-2-38 Household and similar electrical appliances Safety Part 2-38: Particular requirements for commercial electric griddles andgriddle grills - Incorporating corrigendum August 2007; Incorporates Amendment A1: 2008
2003 CENELEC 0
4704 EN 60862-3 Surface acoustic wave (SAW) filters of assessed quality Part 3: Standard outlines 2003 CENELEC 04705 EN 60870-5-
101Telecontrol equipment and systems Part 5-101: Transmission protocols Companion standard for basic telecontrol tasks -Incorporates Amendment A1: 2016
2003 CENELEC 0
4706 EN 60335-2-74 Household and similar electrical appliances - Safety Part 2-74: Particular requirements for portable immersion heaters -Incorporates Amendment A2: 2009
2003 CENELEC 0
4707 EN 50377-5-1 Connector sets and interconnect components to be used in optical fibre communication systems Product specifications Part5-1: Type EC terminated on IEC 60793-2 category B.1.1 singlemode fibre
2003 CENELEC 0
4708 EN 60749-14 Semiconductor devices - Mechanical and climatic test methods Part 14: Robustness of terminations (lead integrity) 2003 CENELEC 04709 EN 60335-2-10 Household and similar electrical appliances Safety Part 2-10: Particular requirements for floor treatment machines and wet
scrubbing machines - Incorporates Amendment A1: 20082003 CENELEC 0
4710 EN 61823 Electrical installations for lighting and beaconing of aerodromes AGL series transformers 2003 CENELEC 04711 EN 60371-1 Specification for Insulating Materials Based on Mica Part 1: Definitions and General Requirements 2003 CENELEC 04712 EN 61300-3-30 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-30:
Examinations and measurements - Polish angle and fibre position on single ferrule multifibre connectors2003 CENELEC 0
4713 EN 60455-3-1 Resin based reactive compounds used for electrical insulation Part 3: Specifications for individual materials Sheet 1:Unfilled epoxy resinous compounds
2003 CENELEC 0
4714 EN 61965 Mechanical safety of cathode ray tubes 2003 CENELEC 04715 EN 60966-4 Radio frequency and coaxial cable assemblies Part 4: Sectional specification for semi-rigid coaxial cable assemblies 2003 CENELEC 04716 EN 61855 Household electrical hair care appliances - Methods of measuring the performance 2003 CENELEC 04717 EN 60335-2-71 Household and similar electrical appliances Safety Part 2-71: Particular requirements for electrical heating appliances for
breeding and rearing animals - Incorporates Amendment A1: 20072003 CENELEC 0
4718 EN 60455-3-4 Resin based reactive compounds used for electrical insulation Part 3: Specifications for individual materials Sheet 4: Filledpolyurethane compounds
2003 CENELEC 0
4719 EN 61800-4 Adjustable speed electrical power drive systems Part 4: General requirements - Rating specifications for a.c. power drivesystems above 1 000 V a.c. and not exceeding 35 kV
2003 CENELEC 0
4720 EN 60191-6-10 Mechanical standardization of semiconductor devices Part 6-10: General rules for the preparation of outline drawings ofsurface mounted semiconductor device packages Dimensions of P-VSON
2003 CENELEC 0
4721 EN 60335-2-85 Household and similar electrical appliances - Safety Part 2-85: Particular requirements for fabric steamers - IncorporatesAmendment A1: 2008
2003 CENELEC 0
4722 EN 62149-6 Fibre optic active components and devices Performance standards Part 6: 650-nm 250-Mbit/s plastic optical fibretransceivers
2003 CENELEC 0
4723 EN 50288-3-1 Multi-element metallic cables used in analogue and digital communication and control Part 3-1: Sectional specification forunscreened cables characterised up to 100 MHz - Horizontal and building backbone cables
2003 CENELEC 0
4724 EN 60335-2-65 Household and similar electrical appliances Safety Part 2-65: Particular requirements for air-cleaning appliances -Incorporates Amendment A11: 2012
2003 CENELEC 0
4725 EN 60903 Live working - Gloves of insulating material - Incorporating Corrigendum January 2005 2003 CENELEC 04726 EN 50065-4-3 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 4-3: Low voltage
decoupling filter - Incoming filter2003 CENELEC 0
4727 EN 61249-2-10 Materials for printed boards and other interconnecting structures Part 2-10: Reinforced base materials clad and uncladCyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of definedflammability (vertical b
2003 CENELEC 0
4728 EN 60512-2-5 Connectors for electronic equipment - Tests and measurements Part 2-5: Electrical continuity and contact resistance tests -Test 2e: Contact disturbance
2003 CENELEC 0
4729 EN 62021-1 Insulating liquids Determination of acidity Part 1: Automatic potentiometric titration 2003 CENELEC 04730 EN 60335-2-73 Household and similar electrical appliances - Safety Part 2-73: Particular requirements for fixed immersion heaters -
Incorporates Amendment A2: 20092003 CENELEC 0
4731 EN 60622 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-cadmium prismaticrechargeable single cells
2003 CENELEC 0
4732 EN 60947-6-2 Low-voltage switchgear and controlgear Part 6-2: Multiple function equipment Control and protective switching devices(or equipment) (CPS) - Incorporates Amendment A1: 2007
2003 CENELEC 0
4733 EN 60335-2-23 Household and similar electrical appliances - Safety Part 2-23: Particular requirements for appliances for skin or hair care -Incorporating Corrigendum June 2012; Incorporates Amendment A2: 2015
2003 CENELEC 0
4734 EN 62053-21 Electricity metering equipment (a.c.) - Particular requirements Part 21: Static meters for active energy (classes 1 and 2) -Incorporates Amendment A1: 2017
2003 CENELEC 0
4735 EN 61280-2-8 Fibre optic communication subsystem test procedures Digital systems Part 2-8: Determination of low BER using Q-factormeasurements
2003 CENELEC 0
4736 EN 60112 Method for the determination of the proof and the comparative tracking indices of solid insulating materials - IncorporatingCorrigendum June 2003
2003 CENELEC 0
4737 EN 60749-8 Semiconductor devices - Mechanical and climatic test methods Part 8: Sealing 2003 CENELEC 04738 EN 62018 Power consumption of information technology equipment Measurement methods 2003 CENELEC 04739 EN 50377-9-1 Connector sets and interconnect components to be used in optical fibre communication systems Product specifications Part
9-1: Type MT-RJ terminated on IEC 60793-2 category A1a and A1b multimode fibre2003 CENELEC 0
4740 EN 60947-5-7 Low-voltage switchgear and controlgear Part 5-7: Control circuit devices and switching elements Requirements forproximity devices with analogue output
2003 CENELEC 0
4741 EN 60544-4 Electrical insulating materials - Determination of the effects of ionizing radiation Part 4: Classification system for service inradiation environments
2003 CENELEC 0
4742 EN 50123-7-1 Railway applications Fixed installations D.C. switchgear Part 7-1: Measurement, control and protection devices for specificuse in d.c. traction systems Application guide
2003 CENELEC 0
4743 EN 60684-3-340 TO 342
Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheets 340 to 342:Expandable Braided Polyethylene Terephthalate Textile Sleeving
2003 CENELEC 0
4744 EN 50065-4-4 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 4-4: Low voltagedecoupling filter - Impedance filter
2003 CENELEC 0
4745 EN 60335-2-32 Household and similar electrical appliances آ_ Safety Part 2-32: Particular requirements for massage appliances -Incorporates Amendment A2: 2015
2003 CENELEC 0
4746 EN 60895 Live working Conductive clothing for use at nominal voltage up to 800 kV a.c. and 600 kV d.c. 2003 CENELEC 04747 EN 60749-19 Semiconductor devices Mechanical and climatic test methods Part 19: Die shear strength - Incorporating Corrigendum June
2003; Incorporates Amendment A1: 20102003 CENELEC 0
4748 EN 50362 Method of test for resistance to fire of larger unprotected power and control cables for use in emergency circuits 2003 CENELEC 04749 EN 50123-4 Railway applications - Fixed installations - D.C. switchgear Part 4: Outdoor d.c. disconnectors, switch-disconnectors and
earthing switches - Incorporates Amendment A1: 20132003 CENELEC 0
4750 EN 61076-4-113
Connectors for electronic equipment - Printed board connectors Part 4-113: Detail specification for two-part connectorshaving 5 rows with grid of 2,54 mm for printed boards and backplans in bus applications
2003 CENELEC 0
4751 EN 60947-8 Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electricalmachines - Incorporates Amendment A2: 2012
2003 CENELEC 0
4752 EN 60335-2-43 Household and similar electrical appliances Safety Part 2-43: Particular requirements for clothes dryers and towel rails -Incorporates Amendment A2: 2008
2003 CENELEC 0
4753 EN 60335-2-48 Household and similar electrical appliances Safety Part 2-48: Particular requirements for commercial electric grillers andtoasters - Incorporating corrigendum September 2007; Incorporates Amendment A11: 2012
2003 CENELEC 0
4754 EN 60704-2-9 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise Part 2-9:Particular requirements for electric hair care appliances
2003 CENELEC 0
4755 EN 60191-6-4 Mechanical standardization of semiconductor devices Part 6-4: General rules for the preparation of outline drawings ofsurface mounted semiconductor device packages - Measuring methods for package dimensions of ball grid array (BGA)
2003 CENELEC 0
4756 EN 60335-2-51 Household and similar electrical appliances Safety Part 2-51: Particular requirements for stationary circulation pumps forheating and service water installations - Incorporates Amendment A2: 2012
2003 CENELEC 0
4757 EN 60068-2-42 Environmental testing Part 2-42: Tests Test Kc: Sulphur dioxide test for contacts and connections 2003 CENELEC 04758 EN 60068-2-43 Environmental testing Part 2-43: Tests Test Kd: Hydrogen sulphide test for contacts and connections 2003 CENELEC 04759 EN 60684-3-
406 TO 408Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheets 406 to 408: Glass textile sleevingwith PVC coating
2003 CENELEC 0
4760 EN 50328 Railway applications Fixed installations Electronic power convertors for substations 2003 CENELEC 04761 EN 60749-17 Semiconductor devices Mechanical and climatic test methods Part 17: Neutron irradiation 2003 CENELEC 04762 EN 60335-2-99 Household and similar electrical appliances Safety Part 2-99: Particular requirements for commercial electric hoods 2003 CENELEC 04763 EN 60512-10-4 Connectors for electronic equipment Tests and measurements Part 10-4: Impact tests (free components), static load tests
(fixed components), endurance tests and overload tests Test 10d: Electrical overload (connectors)2003 CENELEC 0
4764 EN 61014 Programmes for reliability growth 2003 CENELEC 04765 EN 50329 Railway applications Fixed installations Traction transformers - Incorporating corrigendum December 2006; Incorporates
Amendment A1: 20102003 CENELEC 0
4766 EN 61188-5-6 Printed boards and printed board assemblies Design and use Part 5-6: Attachment (land/joint) considerations Chip carrierswith J-leads on four sides
2003 CENELEC 0
4767 EN 60774-4 Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS Part 4: S-VHS video cassettesystem ET-mode
2003 CENELEC 0
4768 EN 50129 Railway applications Communication, signalling and processing systems Safety related electronic systems for signalling -Incorporating corrigendum May 2010
2003 CENELEC 0
4769 EN 61108-1 Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) Part 1:Global positioning system (GPS) -Receiver equipment - Performance standards, methods of testing and required test results
2003 CENELEC 0
4770 EN 60898-1 Electrical accessories - Circuit breakers for overcurrent protection for household and similar installations Part 1: Circuit-breakers for a.c. operation - Incorporating Corrigendum February 2004; Incorporates Amendment A13: 2012
2003 CENELEC 0
4771 EN 60335-2-82 Household and similar electrical appliances Safety Part 2-82: Particular requirements for amusement machines andpersonal service machines - Incorporates Amendment A1: 2008
2003 CENELEC 0
4772 EN 62193 Live working Telescopic sticks and telescopic measuring sticks 2003 CENELEC 04773 EN 61249-2-6 Materials for printed boards and other interconnecting structures Part 2-6: Reinforced base materials, clad and unclad
Brominated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test),copper-clad - In
2003 CENELEC 0
4774 EN 62148-4 Fibre optic active components and devices Package and interface standards Part 4: PN 1x9 plastic optical fibre transceivers 2003 CENELEC 04775 EN 60896-11 Stationary lead-acid batteries Part 11: Vented types - General requirements and methods of tests 2003 CENELEC 04776 EN 60793-1-40 Optical fibres Part 1-40: Measurement methods and test procedures Attenuation 2003 CENELEC 04777 EN 62315-1 DTV profiles for uncompressed digital video interfaces Part 1: General 2003 CENELEC 04778 EN 50289-3-13 Communication cables Specifications for test methods Part 3-13: Mechanical test methods Aeolian vibration 2003 CENELEC 0
4779 EN 60335-2-16 Household and similar electrical appliances Safety Part 2-16: Particular requirements for food waste disposers -Incorporates Amendment A11: 2018
2003 CENELEC 0
4780 EN 60749-32 Semiconductor devices - Mechanical and climatic test methods Part 32: Flammability of plastic-encapsulated devices(externally induced) - Incorporates Amendment A1: 2010
2003 CENELEC 0
4781 EN 60068-3-8 Environmental testing Part 3-8: Supporting documentation and guidance Selecting amongst vibration tests 2003 CENELEC 04782 EN 60335-2-50 Household and similar electrical appliances Safety Part 2-50: Particular requirements for commercial electric bains-marie -
Incorporating corrigendum September 2007; Incorporates Amendment A1: 20082003 CENELEC 0
4783 EN 60335-2-49 Household and similar electrical appliances Safety Part 2-49: Particular requirements for commercial electric appliances forkeeping food and crockery warm - Incorporating corrigendum September 2007; Incorporates Amendment A11: 2012
2003 CENELEC 0
4784 EN 60335-2-60 Household and similar electrical appliances Safety Part 2-60: Particular requirements for whirlpool baths and whirlpoolspas - Incorporates Amendment A12: 2010
2003 CENELEC 0
4785 EN 61131-1 Programmable controllers Part 1: General information 2003 CENELEC 04786 EN 50065-4-5 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 4-5: Low voltage
decoupling filter - Segmentation filter2003 CENELEC 0
4787 EN 62094-1 Indicator light units for household and similar fixed-electrical installations Part 1: General requirements - IncorporatesAmendment A11: 2003
2003 CENELEC 0
4788 EN 61192-4 Workmanship requirements for soldered electronic assemblies Part 4: Terminal assemblies 2003 CENELEC 04789 EN 60749-1 Semiconductor devices - Mechanical and climatic test methods Part 1: General 2003 CENELEC 04790 EN 60335-2-47 Household and similar electrical appliances Safety Part 2-47: Particular requirements for commercial electric boiling pans -
Incorporating corrigendum September 2007; Incorporates Amendment A11: 20122003 CENELEC 0
4791 EN 61966-2-2 Multimedia systems and equipment Colour measurement and management Part 2-2: Colour management Extended RGBcolour space scRGB
2003 CENELEC 0
4792 EN 61076-4-115
Connectors for electronic equipment Part 4-115: Printed board connectors Backplane connector for InfiniBand equipment 2003 CENELEC 0
4793 EN 62053-22 Electricity metering equipment (a.c.) - Particular requirements Part 22: Static meters for active energy (classes 0,2 S and 0,5S) - Incorporates Amendment A1: 2017
2003 CENELEC 0
4794 EN 61249-2-9 Materials for printed boards and other interconnecting structures Part 2-9: Reinforced base materials clad and uncladBismaleimide/triazine, modified epoxide or unmodified, woven E-glass reinforced laminated sheets of definedflammability (vertical burnin
2003 CENELEC 0
4795 EN 60512-2-2 Connectors for electronic equipment - Tests and measurements Part 2-2: Electrical continuity and contact resistance tests -Test 2b: Contact resistance - Specified test current method
2003 CENELEC 0
4796 EN 62148-5 Fibre optic active components and devices Package and interface standards Part 5: SC 1x9 fibre optic modules 2003 CENELEC 04797 EN 60335-2-86 Household and similar electrical appliances Safety Part 2-86: Particular requirements for electric fishing machines -
Incorporates Amendment A12: 20172003 CENELEC 0
4798 EN 62155 Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltagesgreater than 1000 V
2003 CENELEC 0
4799 EN 60455-3-2 Resin based reactive compounds used for electrical insulation Part 3: Specifications for individual materials Sheet 2: Sheet2: Quartz filled epoxy resinous compounds
2003 CENELEC 0
4800 EN 50123-3 Railway applications Fixed installations D.C. switchgear Part 3: Indoor d.c. disconnectors, switch-disconnectors andearthing switches - Incorporates Amendment A1: 2013
2003 CENELEC 0
4801 EN 60335-2-66 Household and similar electrical appliances - Safety Part 2-66: Particular requirements for water-bed heaters - IncorporatesAmendment A2: 2012
2003 CENELEC 0
4802 EN 60311 Electric irons for household or similar use - Methods for measuring performance - Incorporates Amendment A2: 2009 2003 CENELEC 04803 EN 50123-7-2 Railway applications Fixed installations D.C. switchgear Part 7-2: Measurement, control and protection devices for specific
use in d.c. traction systems Isolating current transducers and other current measuring devices2003 CENELEC 0
4804 EN 60335-2-84 Household and similar electrical appliances Safety Part 2-84: Particular requirements for toilets - Incorporates AmendmentA1: 2008
2003 CENELEC 0
4805 EN 60749-16 Semiconductor devices Mechanical and climatic test methods Part 16: Particle impact noise detection (PIND) 2003 CENELEC 04806 EN 62272-1 Digital Radio Mondiale (DRM) Part 1: System specification 2003 CENELEC 04807 EN 61249-2-11 Materials for printed boards and other interconnecting structures Part 2-11: Reinforced base materials, clad and unclad
Polyimide, brominated epoxide modified or unmodified, woven E-glass reinforced laminated sheets of definedflammability (vertical burni
2003 CENELEC 0
4808 EN 60684-3-229
Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 229: Heat-shrinkable semi-flexible,polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1
2003 CENELEC 0
4809 EN 60885-2 Electrical test methods for electric cables Part 2: Partial discharge tests 2003 CENELEC 04810 EN 60068-2-81 Environmental testing Part 2-81: Tests Test Ei: Shock Shock response spectrum synthesis 2003 CENELEC 04811 EN 60966-3-2 Radio frequency and coaxial cable assemblies Part 3-2: Detail specification for semi-flexible coaxial cable assemblies for
GSM use (0,8 GHz - 1 GHz)2003 CENELEC 0
4812 EN 61290-3-1 Optical amplifiers Test methods Part 3-1: Noise figure parameters Optical spectrum analyzer method 2003 CENELEC 04813 EN 60335-2-42 Household and similar electrical appliances - Safety Part 2-42: Particular requirements for commercial electric forced
convection ovens, steam cookers and steam-convection ovens - Incorporating corrigendum September 2007; IncorporatesAmendment A11: 2012
2003 CENELEC 0
4814 EN 60335-2-59 Household and similar electrical appliances Safety Part 2-59: Particular requirements for insect killers - IncorporatesAmendment A2: 2009
2003 CENELEC 0
4815 EN 50065-2-3 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 2-3: Immunityrequirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz andintended for use by elect
2003 CENELEC 0
4816 EN 60746-2 Expression of performance of electrochemical analyzers Part 2: pH value - Incorporating Corrigendum No. 1 2003 CENELEC 04817 EN 62053-11 Electricity metering equipment (a.c.) Particular requirements Part 11: Electromechanical meters for active energy (classes
0,5, 1 and 2) - Incorporates Amendment A1: 20172003 CENELEC 0
4818 EN 50123-1 Railway applications Fixed installations D.C. switchgear Part 1: General 2003 CENELEC 04819 EN 60335-2-9 Household and similar electrical appliances Safety Part 2-9: Particular requirements for grills, toasters and similar portable
cooking appliances - Incorporates Amendment A13: 2010; Incorporating Corrigenda March 2011, July 2011 and June 20122003 CENELEC 0
4820 EN 60335-2-98 Household and similar electrical appliances - Safety Part 2-98: Particular requirements for humidifiers - IncorporatesAmendment A2: 2008
2003 CENELEC 0
4821 EN 50065-2-2 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 2-2: Immunityrequirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHzand intended for use in i
2003 CENELEC 0
4822 EN 61238-1 Compression and mechanical connectors for power cables for rated voltages up to 36 kV (Um = 42 kV) Part 1: Testmethods and requirements
2003 CENELEC 0
4823 EN 62052-11 Electricity metering equipment (AC) - General requirements, tests and test conditions Part 11: Metering equipment -Incorporates Amendment A1: 2017
2003 CENELEC 0
4824 EN 61249-2-5 Materials for printed boards and other interconnecting structures Part 2-5: Reinforced base materials, clad and uncladBrominated epoxide cellulose paper reinforced core / woven E-glass reinforced surfaces laminated sheets of definedflammability (vertica
2003 CENELEC 0
4825 EN 61603-7 Transmission systems for audio and/or video and related signals using infra-red radiation Part 7: Digital audio signals forconference and similar applications
2003 CENELEC 0
4826 EN 61249-2-8 Materials for printed boards and other interconnecting structures Part 2-8: Reinforced base materials clad and uncladModified brominated epoxide woven fibreglass reinforced laminated sheets of defined flammability (vertical burning test),copper-clad
2003 CENELEC 0
4827 EN 60966-2-2 Radio frequency and coaxial cable assemblies Part 2-2: Blank detail specification for flexible coaxial cable assemblies 2003 CENELEC 04828 EN 60335-2-78 Household and similar electrical appliances Safety Part 2-78: Particular requirements for outdoor barbecues - Incorporates
Amendment A1: 20082003 CENELEC 0
4829 EN 61967-5 Integrated circuits Measurement of electromagnetic emissions, 150 kHz to 1 GHz Part 5: Measurement of conductedemissions Workbench Faraday Cage method
2003 CENELEC 0
4830 EN 50370-2 Electromagnetic compatibility (EMC) - Product family standard for machine tools Part 2: Immunity 2003 CENELEC 04831 EN 50123-2 Railway Applications Fixed Installations - D.C. Switchgear Part 2: D.C. Circuit Breakers 2003 CENELEC 04832 EN 187103 Family specification Optical fibre cables for indoor applications 2003 CENELEC 04833 EN 61192-3 Workmanship requirements for soldered electronic assemblies Part 3: Through-hole mount assemblies 2003 CENELEC 04834 EN 60598-2-3 Luminaires Part 2-3: Particular requirements - Luminaires for road and street lighting - Incorporating Corrigendum August
2005; Incorporates Amendment A1: 20112003 CENELEC 0
4835 EN 60335-2-21 Household and similar electrical appliances - Safety Part 2-21: Particular requirements for storage water heaters -Incorporating Corrigenda October 2007 and October 2010; Incorporates Amendment A2: 2008
2003 CENELEC 0
4836 EN 60684-1 Flexible insulating sleeving Part 1: Definitions and general requirements 2003 CENELEC 04837 EN 60335-2-41 Household and similar electrical appliances - Safety Part 2-41: Particular requirements for pumps - Incorporates
Amendment A2: 20102003 CENELEC 0
4838 EN 61300-3-31 Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-31:Examinations and Measurements - Coupled Power Ratio Measurement for Fibre Optic Sources
2003 CENELEC 0
4839 EN 60950-21 Information technology equipment Safety Part 21: Remote power feeding - Incorporating Corrigendum August 2003 2003 CENELEC 04840 EN 60512-11-7 Connectors for electronic equipment - Tests and measurements Part 11- 7: Climatic tests - Test 11g: Flowing mixed gas
corrosion test2003 CENELEC 0
4841 EN 60749-22 Semiconductor devices - Mechanical and climatic test methods Part 22: Bond strength 2003 CENELEC 04842 EN 60077-4 Railway applications - Electric equipment for rolling stock Part 4: Electrotechnical components - Rules for AC circuit-
breakers2003 CENELEC 0
4843 EN 60598-2-10 Luminaires Part 2-10: Particular requirements - Portable luminaires for children - Incorporating Corrigendum August 2005 2003 CENELEC 04844 EN 60335-2-28 Household and similar electrical appliances Safety Part 2-28: Particular requirements for sewing machines - Incorporates
Amendment A1: 20082003 CENELEC 0
4845 EN 60746-1 Expression of performance of electrochemical analyzers Part 1: General 2003 CENELEC 04846 EN 60335-2-81 Household and similar electrical appliances - Safety Part 2-81: Particular requirements for foot warmers and heating mats -
Incorporates Amendment A2: 20122003 CENELEC 0
4847 EN 60512-4-1 Connectors for electronic equipment Tests and measurements Part 4-1: Voltage stress tests Test 4a: Voltage proof 2003 CENELEC 04848 EN 62053-23 Electricity metering equipment (a.c.) - Particular requirements Part 23: Static meters for reactive energy (classes 2 and 3) -
Incorporates Amendment A1: 20172003 CENELEC 0
4849 EN 50123-6 Railway applications Fixed installations D.C. switchgear Part 6: D.C. switchgear assemblies - Incorporates AmendmentA1: 2014
2003 CENELEC 0
4850 EN 60335-2-39 Household and similar electrical appliances Safety Part 2-39: Particular requirements for commercial electric multi-purposecooking pans - Incorporates Amendment A2: 2008; Incorporating corrigendum September 2007
2003 CENELEC 0
4851 EN 60570 Electrical supply track systems for luminaires - Incorporates Amendment A1: 2018 2003 CENELEC 04852 EN 60044-8 Instrument transformers Part 8: Electronic current transformers - Remains Current 2002 CENELEC 04853 EN 61523-1 Delay and Power Calculation Standards Part 1: Integrated Circuit Delay and Power Calculation Systems 2002 CENELEC 04854 EN 61249-2-19 Materials for Printed Boards and Other Interconnecting Structures Part 2-19: Reinforced Base Materials, Clad and Unclad -
Epoxide Cross-Plied Linear Fibreglass-Reinforced Laminated Sheets of Defined Flammability (Vertical Burning Test)Copper Clad
2002 CENELEC 0
4855 EN 61286 Information technology - Coded graphic character set for use in the preparation of documents used in electrotechnology andfor information interchange
2002 CENELEC 0
4856 EN 50307 Lead and lead alloys - Lead and lead alloy sheaths and sleeves of electric cables 2002 CENELEC 04857 EN 61162-400 Maritime Navigation and Radiocommunication Equipment and Systems - Digital Interfaces Part 400: Multiple Talkers and
Multiple Listeners - Ship Systems Interconnection - Introduction and General Principles2002 CENELEC 0
4858 EN 50117-3-1 Coaxial Cables Part 3-1: Sectional Specifications for Cables Used in Telecom Applications - Miniaturized Cables Used inDigital Communication Systems
2002 CENELEC 0
4859 EN 80416-3 Basic principles for graphical symbols for use on equipment Part 3: Guidelines for the application of graphical symbols -Incorporates Amendment A1: 2011
2002 CENELEC 0
4860 EN 60335-2-36 Household and similar electrical appliances - Safety Part 2-36: Particular requirements for commercial electric cookingranges, ovens, hobs and hob elements - Incorporating corrigendum August 2007; Incorporates Amendment A11: 2012
2002 CENELEC 0
4861 EN 60335-2-37 Household and similar electrical appliances - Safety Part 2-37: Particular requirements for commercial electric deep fatfryers - Incorporating corrigendum August 2007; Incorporates Amendment A12: 2016
2002 CENELEC 0
4862 EN 62014-1 Electronic design automation libraries Part 1: Input/Output buffer information specifications (IBIS version 3.2) 2002 CENELEC 04863 EN 50274 Low-Voltage Switchgear and Controlgear Assemblies - Protection Against Electric Shock - Protection Against
Unintentional Direct Contact with Hazardous Live Parts2002 CENELEC 0
4864 EN 50289-3-17 Communication Cables - Specifications for Test Methods Part 3-17: Mechanical Test Methods - Adhesion of Dielectric andSheath
2002 CENELEC 0
4865 EN 60512-5-1 Connectors for Electronic Equipment - Tests and Measurements Part 5-1: Current-Carrying Capacity Tests - Tests 5a:Temperature Rise
2002 CENELEC 0
4866 EN 50216-6 Power Transformer and Reactor Fittings Part 6: Cooling Equipment - Removable Radiators for Oil-Immersed Transformers 2002 CENELEC 04867 EN 50306-1 Railway applications Railway rolling stock cables having special fire performance Thin wall Part 1: General requirements 2002 CENELEC 04868 EN 62056-21 Electricity Metering - Data Exchange for Meter Reading, Tariff and Load Control Part 21: Direct Local Data Exchange 2002 CENELEC 04869 EN 50249 Electromagnetic locators for buried pipes and cables - Performance and safety 2002 CENELEC 04870 EN 60702-1 Mineral Insulated Cables and Their Terminations with a Rated Voltage Not Exceeding 750 V Part 1: Cables - Incorporates
Amendment A1: 20152002 CENELEC 0
4871 EN 61076-2-102
Connectors for Electronic Equipment Part 2-102: Circular Connectors with Assessed Quality - Detail Specification forPlugs and Jacks for External Low Voltage Power Supply
2002 CENELEC 0
4872 EN 50107-1 Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but notexceeding 10 kV Part 1: General requirements - Incorporates Amendment A1: 2004
2002 CENELEC 0
4873 EN 50125-2 Railway applications - Environmental conditions for equipment Part 2: Fixed electrical installations - Incorporatingcorrigendum June 2010
2002 CENELEC 0
4874 EN 61249-2-4 Materials for Printed Boards and Other Interconnecting Structures Part 2-4: Reinforced Base Materials, Clad and Unclad -Polyester Non-Woven/Woven Fibreglass Laminated Sheet of Defined Flammability (Vertical Burning Test), Copper-Clad
2002 CENELEC 0
4875 EN 60749-2 Semiconductor Devices Mechanical and Climatic Test Methods Part 2: Low Air Pressure 2002 CENELEC 04876 EN 60077-3 Railway applications - Electric equipment for rolling stock Part 3: Electrotechnical components - Rules for d.c. circuit-
breakers2002 CENELEC 0
4877 EN 60512-11-13
Connectors for Electronic Equipment - Tests and Measurements Part 11-13: Climatic Tests - Test 11n: Gas Tightness,Solderless Wrapped Connections
2002 CENELEC 0
4878 EN 45510-4-4 Guide for the Procurement of Power Station Equipment - Part 4-4: Boiler Auxiliaries - Fuel Preparation Equipment 2002 CENELEC 04879 EN 60512-11-4 Connectors for Electronic Equipment - Tests and Measurements Part 11-4: Climatic Tests - Test 11d: Rapid Change of
Temperature2002 CENELEC 0
4880 EN 50318 Railway applications - Current collection systems - Validation of simulation of the dynamic interaction between pantographand overhead contact line
2002 CENELEC 0
4881 EN 61334-4-512
Distribution Automation Using Distribution Line Carrier Systems Part 4-512: Data Communication Protocols - SystemManagement Using Profile 61334-5-1 - Management Information Base (MIB)
2002 CENELEC 0
4882 EN 60684-3-400 TO 402
Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheets 400 to 402: Glass textile sleevingwith silicone elastomer coating
2002 CENELEC 0
4883 EN 60512-11-9 Connectors for Electronic Equipment - Tests and Measurements Part 11-9: Climatic Tests - Test 11i: Dry Heat 2002 CENELEC 04884 CECC 96 701 Blank Detail Specification: Dual-in-line switches 2002 CENELEC 04885 EN 60512-2-3 Connectors for Electronic Equipment - Tests and Measurements Part 2-3: Electrical Continuity and Contact Resistance
Tests - Test 2c: Contact Resistance Variation2002 CENELEC 0
4886 EN 60512-2-1 Connectors for Electronic Equipment Tests and Measurements Part 2-1: Electrical Continuity and Contact Resistance TestsTest 2a: Contact Resistance Millivolt Level Method
2002 CENELEC 0
4887 EN 61000-4-13 Electromagnetic compatibility (EMC) Part 4-13: Testing and measurement techniques - Harmonics and interharmonicsincluding mains signalling at a.c. power port, low frequency immunity tests - Incorporates Amendment A2: 2016
2002 CENELEC 0
4888 EN 50326 Conductors for overhead lines - Characteristics of greases 2002 CENELEC 04889 EN 60953-3 Rules for Steam Turbine Thermal Acceptance Tests - Part 3: Thermal Performance Verification Tests of Retrofitted Steam
Turbines2002 CENELEC 0
4890 EN 60554-2 Cellulosic Papers for Electrical Purposes - Part 2: Methods of Test 2002 CENELEC 04891 EN 60335-2-88 Household and similar electrical appliances - Safety Part 2-88: Particular requirements for humidifiers intended for use
with heating, ventilation, or air-conditioning systems2002 CENELEC 0
4892 EN 60793-1-46 Optical Fibres Part 1-46: Measurement Methods and Test Procedures - Monitoring of Changes in Optical Transmittance 2002 CENELEC 04893 EN 60122-1 Quartz crystal units of assessed quality Part 1: Generic specification - Incorporates Amendment A1: 2018 2002 CENELEC 04894 EN 60068-3-4 Environmental Testing - Part 3-4: Supporting Documentation and Guidance - Damp Heat Tests 2002 CENELEC 04895 EN 50243 Outdoor Bushings for 24 kV and 36 kV and for 5 kA and 8 kA, for Liquid Filled Transformers 2002 CENELEC 04896 EN 61000-4-7 Electromagnetic compatibility (EMC) Part 4-7: Testing and measurement techniques - General guide on harmonics and
interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto -Incorporates Amendment A1: 2009
2002 CENELEC 0
4897 EN 50306-2 Railway applications Railway rolling stock cables having special fire performance Thin wall Part 2: Single core cables 2002 CENELEC 04898 EN 60747-16-3 Semiconductor devices - Part 16-3: Microwave integrated circuits - Frequency converters - Incorporates Amendment A2:
20172002 CENELEC 0
4899 EN 60730-2-19 Automatic electrical controls for household and similar use Part 2-19: Particular requirements for electrically operated oilvalves, including mechanical requirements - Incorporates Amendments A11 and A2: 2005
2002 CENELEC 0
4900 EN 60512-11-2 Connectors for Electronic Equipment - Tests and Measurements Part 11-2: Climatic Tests - Test 11b: Combined/SequentialCold, Low Air Pressure and Damp Heat
2002 CENELEC 0
4901 EN 61851-21 Electric Vehicle Conductive Charging System Part 21: Electric Vehicle Requirements for Conductive Connection to ana.c/d.c. Supply - Remains Current
2002 CENELEC 0
4902 EN 50216-5 Power transformer and reactor fittings Part 5: Liquid level, pressure and flow indicators, pressure relief devices anddehydrating breathers - Incorporates Amendments A1: 2002, A2: 2005 and A3: 2006
2002 CENELEC 0
4903 EN 50117-1 Coaxial Cables Part 1: Generic Specification - Incorporates Amendment A2: 2013 2002 CENELEC 04904 EN 50290-2-27 Communication cables Part 2-27: Common design rules and construction Halogen free flame retardant thermoplastic
sheathing compounds - Incorporates Amendment A1: 2007; Incorporating Corrigendum May 20102002 CENELEC 0
4905 EN 61249-2-18 Materials for Printed Boards and Other Interconnecting Structures - Part 2-18: Reinforced Base Materials, Clad and Unclad- Polyester Non-Woven Fibreglass Reinforced Laminated Sheet of Defined Flammability (Vertical Burning Test), Copper-Clad
2002 CENELEC 0
4906 EN 61603-6 Transmission of Audio and/or Video and Related Signals Using Infra-Red Radiation Part 6: Video and Audio-VisualSignals
2002 CENELEC 0
4907 EN 61922 High-frequency induction heating installations - Test methods for the determination of power output of the generator 2002 CENELEC 04908 EN 60512-1-2 Connectors for Electronic Equipment - Tests and Measurements Part 1-2: General Examination - Test 1b: Examination of
Dimensions and Mass2002 CENELEC 0
4909 EN 60335-2-87 Household and similar electrical appliances - Safety Part 2-87: Particular requirements for electrical animal-stunningequipment - Incorporates Amendment A1: 2007
2002 CENELEC 0
4910 EN 60512-11-3 Connectors for Electronic Equipment - Tests and Measurements Part 11-3: Climatic Tests - Test 11c: Damp Heat, SteadyState
2002 CENELEC 0
4911 EN 61162-420 Maritime Navigation and Radiocommunication Equipment and Systems - Digital Interfaces Part 420: Multiple Talkers andMultiple Listeners - Ship Systems Interconnection - Companion Standard Requirements and Basic Companion Standards
2002 CENELEC 0
4912 EN 61967-6 Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz Part 6: Measurement of conductedemissions - Magnetic probe method - Incorporates Amendment A1: 2008
2002 CENELEC 0
4913 EN 62219 Overhead electrical conductors Formed wire, concentric lay, stranded conductors 2002 CENELEC 04914 EN 50325-4 Industrial communication subsystem based on ISO 11898 (CAN) for controller-device interfaces Part 4: CANopen 2002 CENELEC 0
4915 EN 60512-5-2 Connectors for Electronic Equipment - Tests and Measurements Part 5-2: Current-Carrying Capacity Tests - Test 5b:Current-Temperature Derating
2002 CENELEC 0
4916 EN 187105 Single Mode Optical Cable (Duct/Direct Buried Installation) 2002 CENELEC 04917 EN 60068-3-7 Environmental Testing - Part 3-7: Supporting Documentation and Guidance - Measurements in Temperature Chambers for
Tests A and B (With Load)2002 CENELEC 0
4918 EN 61514 Industrial-Process Control Systems - Methods of Evaluating the Performance of Valve Positioners with Pneumatic Outputs 2002 CENELEC 04919 EN 50290-2-30 Communication Cables Part 2-30: Common Design Rules and Construction - Poly(Tetrafluoroethylene-
Hexafluoropropylene)(FEP) Insulation and Sheathing2002 CENELEC 0
4920 EN 62262 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) 2002 CENELEC 04921 EN 61512-2 Batch control - Part 2: Data structures and guidelines for languages 2002 CENELEC 04922 EN 60512-11-
12Connectors for Electronic Equipment - Tests and Measurements Part 11-12: Climatic Tests - Test 11m: Damp Heat, Cyclic 2002 CENELEC 0
4923 EN 50324-2 Piezoelectric properties of ceramic materials and components Part 2: Methods of measurement - Low power 2002 CENELEC 04924 EN 61754-3 Fibre Optic Connector Interfaces Part 3: Type LSA Connector Family 2002 CENELEC 04925 EN 60684-3-
420 TO 422Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 420 to 422: PolyethyleneTerephthalate Textile Sleeeving with Acrylic Based Coating
2002 CENELEC 0
4926 EN 50305 Railway Applications - Railway Rolling Stock Cables Having Special Fire Performance - Test Methods 2002 CENELEC 04927 EN 60730-2-8 Automatic electrical controls for household and similar use Part 2-8: Particular requirements for electrically operated water
valves, including mechanical requirements - Incorporates Amendment A1: 20032002 CENELEC 0
4928 EN 60335-2-83 Household and similar electrical appliances - Safety Part 2-83: Particular requirements for heated gullies for roof drainage -Incorporates Amendment A1: 2008
2002 CENELEC 0
4929 EN 62011-1 Insulating Materials - Industrial, Rigid, Moulded, Laminated Tubes and Rods of Rectangular and Hexagonal Cross-SectionBased on Thermosetting Resins for Electrical Purposes Part 1: Definitions, Designations and General Requirements
2002 CENELEC 0
4930 EN 61676 Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage indiagnostic radiology - Incorporates Amendment A1: 2009
2002 CENELEC 0
4931 EN 50387 Busbar bushings up to 1 kV and from 1,25 kA to 5 kA, for liquid filled transformers 2002 CENELEC 04932 EN 50216-2 Power transformer and reactor fittings Part 2: Gas and oil actuated relay for liquid immersed transformers and reactors with
conservator - Incorporates Amendment A1: 20022002 CENELEC 0
4933 EN 62056-46 Electricity Metering - Data Exchange for Meter Reading, Tariff and Load Control Part 46: Data Link Layer Using HDLCProtocol - Incorporates Amendment A1: 2007
2002 CENELEC 0
4934 EN 60512-6-4 Connectors for Electronic Equipment - Tests and Measurements - Part 6-4: Dynamic Stress Test 6d: Vibration (Sinusoidal) 2002 CENELEC 04935 EN 60746-3 Expression of performance of electrochemical analyzers Part 3: Electrolytic conductivity 2002 CENELEC 04936 EN 61947-2 Electronic Projection - Measurement and Documentation of Key Performance Criteria Part 2: Variable Resolution
Projectors2002 CENELEC 0
4937 EN 60352-7 (FAULTY STANDARD) Solderless Connections - Part 7: Spring Clamp Connections - General Requirements, TestMethods and Practical Guidance
2002 CENELEC 0
4938 EN 62056-42 Electricity Metering - Data Exchange for Meter Reading, Tariff and Load Control Part 42: Physical Layer Services andProcedures for Connection-Oriented Asynchronous Data Exchange
2002 CENELEC 0
4939 EN 60512-11-6 Connectors for Electronic Equipment - Tests and Measurements Part 11-6: Climatic Tests - Test 11f: Corrosion, Salt Mist 2002 CENELEC 04940 EN 60684-3-
300Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 300: Glass textile fibre sleeving,braided, uncoated
2002 CENELEC 0
4941 EN 62044-1 Cores made of soft magnetic materials - Measuring methods Part 1: Generic specification 2002 CENELEC 04942 EN 50216-3 Power transformer and reactor fittings Part 3: Protective relay for hermetically sealed liquid-immersed transformers and
reactors without gaseous cushion - Incorporates Amendments A1: 2002 and A2: 20062002 CENELEC 0
4943 EN 62326-1 Printed Boards Part 1: Generic Specification 2002 CENELEC 04944 EN 61193-1 Quality Assessment Systems - Part 1: Registration and Analysis of Defects on Printed Board Assemblies 2002 CENELEC 0
4945 EN 60335-2-101
Household and similar electrical appliances - Safety Part 2-101: Particular requirements for vaporizers - IncorporatesAmendment A2: 2014
2002 CENELEC 0
4946 EN 61754-18 Fiber Optic Connector Interfaces Part 18: Type MT-RJ Connector Family 2002 CENELEC 04947 EN 50377-6-1 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications
Part 6-1: Type SC-RJ terminated on IEC 60793-2 category A1a and A1b multimode fibre2002 CENELEC 0
4948 EN 60684-3-240 TO 243
Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheets 240 to 243: Heat-shrinkable PTFEsleeving
2002 CENELEC 0
4949 EN 45510-4-5 Guide for the Procurement of Power Station Equipment - Part 4-5: Boiler Auxiliaries - Coal Handling and Bulk StoragePlant
2002 CENELEC 0
4950 EN 60684-3-343 TO 345
Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheets 343 to 345: Expandable braidedethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated
2002 CENELEC 0
4951 EN 60512-6-3 Connectors for Electronic Equipment - Tests and Measurements Part 6-3: Dynamic Stress Tests - Test 6c: Shock 2002 CENELEC 04952 EN 50324-1 Piezoelectric Properties of Ceramic Materials and Components Part 1: Terms and Definitions 2002 CENELEC 04953 EN 60702-2 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V Part 2: Terminations -
Incorporates Amendment A1: 20152002 CENELEC 0
4954 EN 60512-2-6 Connectors for Electronic Equipment - Tests and Measurements Part 2-6: Electrical Continuity and Contact ResistanceTests - Test 2f: Housing (Shell) Electrical Continuity
2002 CENELEC 0
4955 EN 61076-4-110
Connectors for Electronic Equipment - Part 4-110: Printed Board Connectors with Assessed Quality - Detail Specificationfor Latched Cable Connector System Having a Basic Grid of 2,0 mm Including Full Shielding and Latching Function
2002 CENELEC 0
4956 EN 60793-1-21 Optical Fibres - Part 1-21: Measurement Methods and Test Procedures - Coating Geometry 2002 CENELEC 04957 EN 61000-2-4 Electromagnetic Compatibility (EMC) Part 2-4: Environment - Compatibility Levels in Industrial Plants for Low-
Frequency Conducted Disturbances2002 CENELEC 0
4958 EN 50336 Bushings for transformers and reactor cable boxes not exceeding 36 kV 2002 CENELEC 04959 EN 50325-1 Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces Part 1: General
requirements2002 CENELEC 0
4960 EN 61207-3 Gas analyzers - Expression of performance Part 3: Paramagnetic oxygen analyzers 2002 CENELEC 04961 EN 60335-2-70 Household and similar electrical appliances - Safety Part 2-70: Particular requirements for milking machines - Incorporates
Amendment A1: 20072002 CENELEC 0
4962 EN 60704-2-3 Household and similar electrical appliances Test code for the determination of airborne acoustical noise Part 2-3: Particularrequirements for dishwashers - Incorporates Amendment A1: 2005
2002 CENELEC 0
4963 EN 61851-22 Electric Vehicle Conductive Charging System Part 22: AC Electric Vehicle Charging Station 2002 CENELEC 04964 EN 50216-7 Power Transformer and Reactor Fittings Part 7: Electric Pumps for Transformer Oil 2002 CENELEC 04965 EN 61162-410 Maritime Navigation and Radiocommunication Equipment and Systems - Digital Interfaces Part 410: Multiple Talkers and
Multiple Listeners - Ship Systems Interconnection - Transport Profile Requirements and Basic Transport Profile2002 CENELEC 0
4966 EN 50083-9 Cable networks for television signals, sound signals and interactive services Part 9: Interfaces for CATV/SMATV headendsand similar professional equipment for DVB/MPEG-2 transport streams
2002 CENELEC 0
4967 EN 50134-1 Alarm Systems - Social Alarm Systems Part 1: System Requirements 2002 CENELEC 04968 EN 60945 Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and
required test results2002 CENELEC 0
4969 EN 60749-11 Semiconductor Devices Mechanical and Climatic Test Methods Part 11: Rapid Change of Temperature Two-Fluid-BathMethod
2002 CENELEC 0
4970 EN 50346 Information technology - Cabling installation - Testing of installed cabling - Incorporates Amendment A2: 2009 2002 CENELEC 04971 EN 61076-4-
111Connectors for Electronic Equipment Part 4-111: Printed Board Connectors with Assessed Quality - Detail Specificationfor Two-Part Power Connector Modules, for Printed Boards and Backplanes Having Early Mating Features, and Having aBasic Grid of 2,5 mm i
2002 CENELEC 0
4972 EN 50290-2-28 Communication Cables Part 2-28: Common Design Rules and Construction - Filling Compounds for Filled Cables 2002 CENELEC 0
4973 EN 61188-5-1 Printed boards and printed board assemblies - Design and use - Part 5-1: Attachment (land/joint) considerations - Genericrequirements
2002 CENELEC 0
4974 EN 60335-2-96 Household and similar electrical appliances - Safety Part 2-96: Particular requirements for flexible sheet heating elementsfor room heating - Incorporates Amendment A2: 2009
2002 CENELEC 0
4975 EN 60335-2-45 Household and similar electrical appliances - Safety Part 2-45: Particular requirements for portable heating tools andsimilar appliances - Incorporates Amendment A2: 2012
2002 CENELEC 0
4976 EN 60359 Electrical and Electronic Measurement Equipment - Expression of Performance 2002 CENELEC 04977 EN 60684-3-
403 TO 405Flexible Insulating Sleeving Part 3: Specification for Individual Types of Sleeving Sheets 403 to 405: Glass TextileSleeving with Acrylic Based Coating
2002 CENELEC 0
4978 EN 60052 Voltage Measurement by Means of Standard Air Gaps 2002 CENELEC 04979 EN 60684-3-
320Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 320: Polyethylene terephthalatetextile sleeving, lightly impregnated
2002 CENELEC 0
4980 EN 60512-25-2 Connectors for Electronic Equipment - Tests and Measurements Part 25-2: Test 25b: Attenuation (Insertion Loss) 2002 CENELEC 04981 EN 61643-321 Components for Low-Voltage Surge Protective Devices Part 321: Specifications for Avalanche Breakdown Diode (ABD) 2002 CENELEC 04982 EN 50306-4 Railway applications Railway rolling stock cables having special fire performance Thin wall Part 4: Multicore and
multipair cables standard wall sheathed2002 CENELEC 0
4983 EN 60512-11-10
Connectors for Electronic Equipment - Tests and Measurements - Part 11-10: Climatic Tests - Test 11j: Cold 2002 CENELEC 0
4984 EN 61162-401 Maritime Navigation and Radiocommunication Equipment and Systems - Digital Interfaces Part 401: Multiple Talkers andMultiple Listeners - Ship Systems Interconnection - Application Profile
2002 CENELEC 0
4985 EN 60335-2-44 Household and similar electrical appliances - Safety Part 2-44: Particular requirements for ironers - IncorporatesAmendment A2: 2012
2002 CENELEC 0
4986 EN 61000-2-2 Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducteddisturbances and signalling in public low-voltage power supply systems - Incorporates Amendment A1: 2017
2002 CENELEC 0
4987 EN 61190-1-1 Attachment Materials for Electronic Assembly - Part 1-1: Requirements for Soldering Fluxes for High-QualityInterconnections in Electronics Assembly
2002 CENELEC 0
4988 EN 60512-11-5 Connectors for Electronic Equipment - Tests and Measurements Part 11-5: Climatic Tests - Test 11e: Mould Growth 2002 CENELEC 04989 EN 61967-1 Integrated Circuits - Measurement of Electromagnetic Emissions, 150 kHZ to 1 GHz Part 1: General Conditions and
Definitions2002 CENELEC 0
4990 EN 62122 Methods of Measurement for Consumer-Use Digital VTRs - Electronic and Mechanical Performances 2002 CENELEC 04991 CECC 96 601 Blank Detail Specification: Slide switches 2002 CENELEC 04992 EN 61249-2-7 Materials for Printed Boards and Other Interconnecting Structures Part 2-7: Reinforced Base Materials Clad and Unclad -
Epoxide Woven E-Glass Laminated Sheet of Defined Flammability (Vertical Burning Test), Copper-Clad - IncorporatingCorrigendum Septembe
2002 CENELEC 0
4993 EN 60512-11-11
Connectors for Electronic Equipment - Tests and Measurements - Part 11-11: Climatic Tests - Test 11k: Low Air Pressure 2002 CENELEC 0
4994 EN 50384 Product Standard to Demonstrate the Compliance of Radio Base Stations and Fixed Terminal Stations for WirelessTelecommunication Systems with the Basic Restrictions or the Reference Levels Related to Human Exposure to RadioFrequency Electromagnetic Field
2002 CENELEC 0
4995 EN 50365 Electrically Insulating Helmets for Use on Low Voltage Installations 2002 CENELEC 04996 EN 62105 Digital audio broadcasting system Specification of the receiver data interface (RDI) 2002 CENELEC 04997 EN 60749-10 Semiconductor Devices - Mechanical and Climatic Test Methods Part 10: Mechanical Shock 2002 CENELEC 04998 EN 62012-1 Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments Part 1: Generic
specification2002 CENELEC 0
4999 EN 60512-4-2 Connectors for Electronic Equipment - Tests and Measurements Part 4-2: Voltage Stress Tests - Test 4b: Partial Discharge 2002 CENELEC 05000 EN 60512-3-1 Connectors for electronic equipment Tests and measurements Part 3-1: Insulation tests Test 3a: Insulation resistance 2002 CENELEC 0
5001 EN 50290-2-26 Communication cables Part 2-26: Common design rules and construction Halogen free flame retardant insulationcompounds - Incorporates Amendment A1: 2007
2002 CENELEC 0
5002 EN 60076-4 Power Transformers - Part 4: Guide to the Lightning Impulse and Switching Impulse Testing - Power Transformers andReactors
2002 CENELEC 0
5003 EN 50375 Testing methodology for wipers used in electrical insulating oil 2002 CENELEC 05004 EN 60073 Basic and Safety Principles for Man-Machine Interface, Marking and Identification - Coding Principles for Indication
Devices and Actuators2002 CENELEC 0
5005 EN 60512-6-2 Connectors for Electronic Equipment - Tests and Measurements - Part 6-2: Dynamic Stress Tests - Test 6b: Bump 2002 CENELEC 05006 EN 60127-10 Miniature Fuses - Part 10: User Guide for Miniature Fuses 2002 CENELEC 05007 EN 60730-2-2 Automatic electrical controls for household and similar use Part 2-2: Particular requirements for thermal motor protectors -
Incorporates Amendments A11: 2005 and A1: 20062002 CENELEC 0
5008 EN 60512-1-1 Connectors for Electronic Equipment - Tests and Measurements Part 1-1: General Examination - Test 1a: VisualExamination
2002 CENELEC 0
5009 EN 50250 Conversion adaptors for industrial use - Incorporating Corrigendum August 2007; Incorporates Amendment A1: 2015 2002 CENELEC 05010 EN 61967-4 Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz Part 4: Measurement of conducted
emissions - 1 ohm/150 ohm direct coupling method - Incorporates Amendment A1: 2006; Incorporating CorrigendumDecember 2006
2002 CENELEC 0
5011 EN 50306-3 Railway applications - Railway rolling stock cables having special fire performance - Thin wall Part 3: Single core andmulticore cables (pairs, triples and quads) screened and thin wall sheathed
2002 CENELEC 0
5012 EN 60404-14 Magnetic materials Part 14: Methods of measurement of the magnetic dipole moment of a ferromagnetic material specimenby the withdrawal or rotation method
2002 CENELEC 0
5013 EN 61076-4-108
Connectors for electronic equipment Part 4-108: Printed board connectors with assessed quality Detail specification forcable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transversepacking density o
2002 CENELEC 0
5014 EN 60191-6-2 Mechanical Standardization of Semiconductor Devices Part 6-2: General Rules for the Preparation of Outline Drawings ofSurface Mounted Semiconductor Device Packages - Design Guide for 1,50 mm, 1,27 mm and 1,00 mm Pitch Ball andColumn Terminal Packages
2002 CENELEC 0
5015 EN 61290-5-3 Optical Fibre Amplifiers - Basic Specification Part 5-3: Test Methods for Reflectance Parameters - Reflectance ToleranceUsing an Electrical Spectrum Analyser
2002 CENELEC 0
5016 EN 50289-1-6 Communication Cables - Specifications for Test Methods Part 1-6: Electrical Test Methods - Electromagnetic Performance 2002 CENELEC 05017 EN 50289-4-11 Communication Cables - Specifications for Test Methods Part 4-11: Environmental Test Methods - a Horizontal Integrated
Fire Test Method2002 CENELEC 0
5018 EN 61947-1 Electronic projection - Measurement and documentation of key performance criteria Part 1: Fixed resolution projectors 2002 CENELEC 05019 EN 60793-1-22 Optical Fibres Part 1-22: Measurement Methods and Test Procedures - Length Measurement 2002 CENELEC 05020 EN 50324-3 Piezoelectric properties of ceramic materials and components Part 3: Methods of measurement - High power 2002 CENELEC 05021 EN 50290-2-24 Communication cables Part 2-24: Common design rules and construction PE sheathing - Incorporates Amendment A1:
20082002 CENELEC 0
5022 EN 61754-19 Fiber Optic Connector Interfaces Part 19: Type SG Connector Family 2002 CENELEC 05023 EN 60512-4-3 Connectors for Electronic Equipment - Tests and Measurements - Part 4-3: Voltage Stress Tests - Test 4c: Voltage Proof of
Pre-Insulted Crimp Barrels2002 CENELEC 0
5024 EN 61000-4-25 Electromagnetic compatibility (EMC) Part 4-25: Testing and measurement techniques HEMP immunity test methods forequipment and systems - Incorporates Amendment A1: 2012
2002 CENELEC 0
5025 EN 61300-3-26 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-26:Examinations and measurements - Measurement of the angular misalignment between fibre and ferrule axes
2002 CENELEC 0
5026 EN 60993 Electrolyte for Vented Nickel-Cadmium Cells 2002 CENELEC 05027 EN 60747-16-1 Semiconductor devices Part 16-1: Microwave integrated circuits Amplifiers - Incorporates Amendment A2: 2017 2002 CENELEC 05028 EN 50216-1 Power Transformer and Reactor Fittings Part 1: General 2002 CENELEC 0
5029 EN 61842 Microphones and Earphones for Speech Communications 2002 CENELEC 05030 EN 60512-6-1 Connectors for Electronic Equipment - Tests and Measurements Part 6-1: Dynamic Stress Tests - Test 6a: Acceleration,
Steady State2002 CENELEC 0
5031 EN 81714-3 Design of Graphical Symbols for Use in the Technical Documentation of Products Part 3: Classification of Connect Nodes,Networks and Their Encoding
2001 CENELEC 0
5032 EN 50290-1-1 Communication Cables - Part 1-1: General 2001 CENELEC 05033 EN 50289-3-4 Communication Cables - Specifications for Test Methods Part 3-4: Mechanical Test Methods - Tensil Strength, Elongation
and Shrinkage of Insulation and Sheath2001 CENELEC 0
5034 EN 61076-4-101
Connectors for Electronic Equipment Part 4-101: Printed Board Connectors with Assessed Quality - Detail Specificationfor Two-Part Connector Modules, Having a Basic Grid of 2,0 mm for Printed Boards and Backplanes in Accordance withIEC 60917
2001 CENELEC 0
5035 EN 61685 Ultrasonics - Flow Measurement Systems - Flow Test Object 2001 CENELEC 05036 EN 60464-3-1 Varnishes Used for Electrical Insulation Part 3: Specifications for Individual Materials Sheet 1: Ambient Curing Finishing
Varnishes - Incorporates Amendment A1: 20062001 CENELEC 0
5037 EN 61204-6 Low-Voltage Power Supplies, DC Output Part 6: Requirements for Low-Voltage Power Supplies of Assessed Performance 2001 CENELEC 05038 EN 60139 Preparation of Outline Drawings for Cathode-Ray Tubes, their Components, Connections and Gauges 2001 CENELEC 05039 EN 61691-3-3 Behavioural Languages - Part 3-3: Synthesis in VHDL 2001 CENELEC 05040 HD 586.3 S1 Mineral Insulated Cables with a Rated Voltage Not Exceeding 750 V Part 3: Guide to Use 2001 CENELEC 05041 EN 60264-5-2 Packaging of Winding Wires Part 5-2: Cylindrical Barrelled Delivery Spools with Conical Flanges - Specification for
Returnable Spools Made from Thermoplastic Material2001 CENELEC 0
5042 EN 82045-1 Document Management Part 1: Principles and Methods 2001 CENELEC 05043 EN 50289-3-9 Communication Cables - Specifications for Test Methods Part 3-9: Mechanical Test Methods - Bending Tests 2001 CENELEC 05044 EN 60191-6-5 Mechanical Standardization of Semiconductor Devices Part 6-5: General Rules for the Preparation of Outline Drawings of
Surface Mounted Semiconductor Device Packages - Design Guide for Fine-Pitch Ball Grid Array (FBGA)2001 CENELEC 0
5045 EN 50171 Central Power Supply Systems - Incorporating Corrigendum August 2001 2001 CENELEC 05046 EN 62070 Broadcast Digital Video Tape Recorders - Identification Method for Recording and/or Reproduction Error Status 2001 CENELEC 05047 EN 60534-3-2 Industrial-Process Control Valves Part 3-2: Dimensions - Face-to-Face Dimensions for Rotary Control Valves Except
Butterfly Valves2001 CENELEC 0
5048 EN 61347-2-11 Lamp controlgear Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires -Incorporating corrigendum December 2010
2001 CENELEC 0
5049 EN 61083-1 Instruments and Software Used for Measurement in High-Voltage Impulse Tests - Part 1: Requirements for Instruments 2001 CENELEC 05050 EN 62099 Fibre Optic Wavelength Switches - Generic Specification 2001 CENELEC 05051 EN 61518 Mating Dimensions between Differential Pressure (Type) Measuring Instruments and Flanged-On Shut-Off Devices Up to
413 Bar (41,3 MPa) - Incorporating corrigendum February 20022001 CENELEC 0
5052 EN 60747-5-1 Discrete semiconductor devices and integrated circuits Part 5-1: Optoelectronic devices General - IncorporatesAmendments A1: 2002 and A2: 2002; Remains Current
2001 CENELEC 0
5053 EN 60255-24 Electrical Relays Part 24: Common Format for Transient Data Exchange (COMTRADE) for Power Systems 2001 CENELEC 05054 EN 61966-8 Multimedia Systems and Equipment - Colour Measurement and Management - Part 8: Multimedia Colour Scanners 2001 CENELEC 05055 EN 62044-3 Cores Made of Soft Magnetic Materials - Measuring Methods Part 3: Magnetic Properties at High Excitation Level 2001 CENELEC 05056 EN 50201 Interfaces for DVB-IRD 2001 CENELEC 05057 EN 50289-3-16 Communication Cables - Specifications for Test Methods - Part 3-16: Mechanical Test Methods - Cable Tensile
Performance2001 CENELEC 0
5058 EN 61481 Live working Portable phase comparators for use on voltages from 1 kV to 36 kV a.c. - Incorporates Amendments A1:2002 and A2: 2005
2001 CENELEC 0
5059 EN 60270 High-voltage test techniques - Partial discharge measurements - Incorporates Amendment A1:2016 2001 CENELEC 0
5060 EN 50290-2-22 Communication Cables - Part 2-22: Common Design Rules and Construction - PVC Sheathing Compounds - IncorporatesAmendment A1: 2007
2001 CENELEC 0
5061 EN 60454-3-14 Pressure-Sensitive Adhesive Tapes for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 14:Polytetrafluoroethylene Film Tapes with Pressure-Sensitive Adhesive
2001 CENELEC 0
5062 EN 62005-2 Reliability of Fibre Optic Interconnecting Devices and Passive Components - Part 2: Quantitative Assessment of RelibilityBased on Accelerated Ageing Tests - Temperature and Humidity; Steady State
2001 CENELEC 0
5063 EN 61000-5-7 Electromagnetic Compatibility (EMC) Part 5-7: Installation and Mitigation Guidelines - Degrees of Protection byEnclosures Against Electromagnetic Disturbances (EM Code)
2001 CENELEC 0
5064 EN 61061-2 Specification for Non-Impregnated, Densified Laminated Wood for Electrical Purposes Part 2: Methods of Test 2001 CENELEC 05065 EN 50289-1-10 Communication Cables - Specifications for Test Methods - Part 1-10: Electrical Test Methods - Crosstalk 2001 CENELEC 05066 EN 61631 Test Method for the Mechanical Strength of Cores Made of Magnetic Oxides 2001 CENELEC 05067 EN 61834-10 Recording - Helical-Scan Digital Video Cassette Recording System Using 6,35 mm Magnetic Tape for Consumer Use
(525-60, 625-50, 1125-60 and 1250-50 Systems) Part 10: DTV Format2001 CENELEC 0
5068 EN 60819-2 Non-Cellulosic Papers for Electrical Purposes Part 2: Methods of Test 2001 CENELEC 05069 EN 61334-3-22 Distribution Automation Using Distribution Line Carrier Systems Part 3-22: Mains Signalling Requirements - MV Phase-
to-Earth and Screen-to-Earth Intrusive Coupling Devices2001 CENELEC 0
5070 EN 60188 High-Pressure Mercury Vapour Lamps - Performance Specifications 2001 CENELEC 05071 EN 61076-4-
107Connectors for Electronic Equipment - Part 4-107: Printed Board Connectors with Assessed Quality - Detail Specificationfor Shielded Two-Part Connectors Having a Basic Grid of 2,0 mm, Fixed Part with Solder and Press-in Terminations forPrinted Boards, Fr
2001 CENELEC 0
5072 EN 60191-6-1 Mechanical Standardization of Semiconductor Devices Part 6-1: General Rules for the Preparation of Outline Drawings ofSurface Mounted Semiconductor Device Packages - Design Guide for Gull-Wing Lead Terminals
2001 CENELEC 0
5073 EN 62107 Super Video Compact Disc - Disc-Interchange System-Specification 2001 CENELEC 05074 EN 50289-1-4 Communication Cables - Specifications for Test Methods Part 1-4: Electrical Test Methods - Insulation Resistance 2001 CENELEC 05075 EN 60819-3-1 Non-Cellulosic Papers for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 1: Filled Glass Paper 2001 CENELEC 05076 EN 50289-3-11 Communication Cables - Specifications for Test Methods - Part 3-11: Mechanical Test Methods - Cable Cut-Through
Resistance2001 CENELEC 0
5077 EN 60512-23-4 Connectors for Electronic Equipment - Tests and Measurements Part 23-4: Screening and Filtering Tests - Test 23D:Transmission Line Reflections in the Time Domain
2001 CENELEC 0
5078 EN 60512-12-7 Connectors for Electronic Equipment - Tests and Measurements Part 12-7: Soldering Tests - Test 12g: Solderability,Wetting Balance Method
2001 CENELEC 0
5079 R0BT-004 EC Directives, Functional Safety and the Role of CENELEC Standardization 2001 CENELEC 05080 EN 61754-9 Fibre Optic Connector Interfaces - Part 9: Type DS Connector Family 2001 CENELEC 05081 EN 62005-1 Reliability of Fibre Optic Interconnecting Devices and Passive Components Part 1: Introductory Guide and Definitions 2001 CENELEC 05082 EN 61131-5 Programmable Controllers Part 5: Communications 2001 CENELEC 05083 EN 60534-6-2 Industrial-Process Control Valves Part 6-2: Mounting Details for Attachment of Positioners to Control Valves - Positioner
Mounting on Rotary Actuators2001 CENELEC 0
5084 EN 60191-6-8 Mechanical Standardization of Semiconductor Devices Part 6-8: General Rules for the Preparation of Outline Drawings ofSurface Mounted Semiconductor Device Packages - Design Guide for Glass Sealed Ceramic Quad Flatpack (G-QFP)
2001 CENELEC 0
5085 EN 50289-3-5 Communication Cables - Specifications for Test Methods Part 3-5: Mechanical Test Methods - Crush Resistance of theCable
2001 CENELEC 0
5086 EN 50289-4-9 Communication Cables - Specifications for Test Methods Part 4-9: Environmental Test Methods - Pneumatic Resistance 2001 CENELEC 05087 EN 50289-3-12 Communication Cables - Specifications for Test Methods - Part 3-12: Mechanical Test Methods - Shot Gun Damage 2001 CENELEC 05088 EN 50341-2 Overhead electrical lines exceeding AC 45 kV Part 2: Index of National Normative Aspects - Incorporating corrigendum
October 20062001 CENELEC 0
5089 EN 50347 General Purpose Three-Phase Induction Motors Having Standard Dimensions and Outputs - Frame Numbers 56 to 315 andFlange Numbers 65 to 740
2001 CENELEC 0
5090 EN 62121 Methods of Measurement for Minidisc Recorders/Players 2001 CENELEC 05091 EN 50289-4-2 Communication Cables - Specifications for Test Methods Part 4-2: Environmental Test Methods - Water Penetration 2001 CENELEC 05092 EN 60464-3-2 Varnishes Used for Electrical Insulation Part 3: Specifications for Individual Materials Sheet 2: Hot Curing Impregnating
Varnishes - Incorporates Amendment A1: 20062001 CENELEC 0
5093 EN 60819-3-2 Non-Cellulosic Papers for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 2: Hybrid Inorganic-Organic Paper
2001 CENELEC 0
5094 EN 50353 Insulating Oil - Determination of Fibre Contamination by the Counting Method Using a Microscope 2001 CENELEC 05095 EN 61788-5 Superconductivity Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of
Cu/Nb-Ti composite superconductors2001 CENELEC 0
5096 EN 50344-1 Routine Tests for Controls within the Scope of the EN 60730 Series - Part 1: General Requirements - IncorporatingCorrigendum October 2001
2001 CENELEC 0
5097 EN 170100 Harmonized System of Quality Assessment for Electronic Components - Sectional Specification: Waveguide TypeDielectric Resonators
2001 CENELEC 0
5098 EN 12589 Ventilation for Buildings - Air Terminal Units - Aerodynamic Testing and Rating of Constant and Variable Rate TerminalUnits
2001 CENELEC 0
5099 EN 50334 Marking by Inscription for the Identification of Cores of Electric Cables 2001 CENELEC 05100 EN 60464-2 Varnishes used for electrical insulation Part 2: Methods of test - Incorporates Amendment A1: 2006; Incorporating
Corrigendum December 20062001 CENELEC 0
5101 EN 61016 Helical-Scan Digital Component Video Cassette Recording System Using 19 mm Magnetic Tape (Format D-1) 2001 CENELEC 05102 EN 61347-2-10 Lamp controlgear Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of
cold start tubular discharge lamps (neon tubes) - Incorporates Amendment A1: 20092001 CENELEC 0
5103 EN 170101 Blank Detail Specification: Waveguide Type Dielectric Resonators - Capability Approval Blank Detail Specification:Waveguide Type Dielectric Resonators - Capability Approval
2001 CENELEC 0
5104 EN 61347-2-1 Lamp controlgear - Part 2-1: Particular requirements for starting devices (other than glow starters) - IncorporatingCorrigenda July 2003, November 2006 and December 2010; Incorporates Amendment A2: 2014
2001 CENELEC 0
5105 EN 62156 Digital video recording with video compression 12,65 mm type D-9 component format 525/60 and 625/50 (digital S) 2001 CENELEC 05106 EN 61300-3-20 Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures Part 3-20:
Examinations and Measurements - Directivity of Fibre Optic Branching Devices - Incorporating Corrigendum March 20022001 CENELEC 0
5107 EN 61334-5-1 Distribution Automation Using Distribution Line Carrier Systems Part 5-1: Lower Layer Profiles - the Spread FrequencyShift Keying (S-FSK) Profile
2001 CENELEC 0
5108 EN 60512-25-4 Connectors for Electronic Equipment - Tests and Measurements Part 25-4: Test 25d - Propagation Delay 2001 CENELEC 05109 EN 60512-25-1 Connectors for Electronic Equipment - Tests and Measurements Part 25-1: Test 25a - Crosstalk Ratio 2001 CENELEC 05110 EN 60192 Low Pressure Sodium Vapour Lamps - Performance Specifications 2001 CENELEC 05111 EN 61076-4-
100Connectors for Electronic Equipment - Part 4-100: Printed Board Connectors with Assessed Quality - Detail Specificationfor Two-Part Connector Modules Having a Grid of 2,5 mm for Printed Boards and Backplanes
2001 CENELEC 0
5112 EN 50289-4-1 Communication Cables - Specifications for Test Methods Part 4-1: Environmental Test Methods - General Requirements 2001 CENELEC 05113 EN 50289-1-3 Communication Cables - Specifications for Test Methods Part 1-3: Electrical Test Methods - Dielectric Strength 2001 CENELEC 05114 EN 60512-25-3 Connectors for Electronic Equipment - Tests and Measurement Part 25-3: Test 25c - Rise Time Degradation 2001 CENELEC 05115 EN 60317-51 Specifications for Particular Types of Winding Wires Part 51: Solderable Polyurethane Enamelled Round Copper Wire,
Class 1802001 CENELEC 0
5116 EN 60684-3-145 TO 147
Flexible Insulating Sleeving Part 3: Specifications for Individual Types of Sleeving Sheets 145 to 147: Extruded PTFESleeving
2001 CENELEC 0
5117 EN 50289-1-7 Communication Cables - Specifications for Test Methods Part 1-7: Electrical Test Methods - Velocity of Propagation 2001 CENELEC 05118 EN 61643-341 Components for Low-Voltage Surge Protective Devices - Part 341: Specification for Thyristor Surge Suppressors (TSS) 2001 CENELEC 0
5119 EN 61378-2 Convertor Transformers Part 2: Transformers for HVDC Applications 2001 CENELEC 05120 EN 60747-5-3 Discrete semiconductor devices and integrated circuits Part 5-3: Optoelectronic devices Measuring methods - Incorporates
Amendment A1: 2002; Remains Current2001 CENELEC 0
5121 EN 61479 Live working - Flexible conductor covers (line hoses) of insulating material - Incorporates Amendment A1: 2002 2001 CENELEC 05122 EN 50065-7 Signalling on Low-Voltage Electrical Installations in the Frequency Range 3 kHz to 148,5 kHz - Part 7: Equipment
Impedance2001 CENELEC 0
5123 EN 61243-5 Live Working - Voltage Detectors - Part 5: Voltage Detecting Systems (VDS) 2001 CENELEC 05124 EN 60684-3-
121 TO 124Flexible Insulating Sleeving Part 3: Specifications for Individual Types of Sleeving Sheets 121 and 124: Extruded SiliconeSleeving
2001 CENELEC 0
5125 EN 80416-2 Basic Principles for Graphical Symbols for Use on Equipment Part 2: Form and Use of Arrows 2001 CENELEC 05126 EN 61061-3-2 Non-Impregnated Densified Laminated Wood for Electrical Purposes - Part 3: Specifications for Individual Materials -
Sheet 2: Sheets Produced from Beech Veneer2001 CENELEC 0
5127 EN 60191-6-6 Mechanical Standardization of Semicondutor Devices Part 6-6: General Rules for the Preparation of Outline Drawings ofSurface Mounted Semiconductor Device Packages - Design Guide for Fine Pitch Land Grid Array (FLGA)
2001 CENELEC 0
5128 EN 61834-8 Recording - Helical-Scan Digital Video Cassette Recording System Using 6,35 mm Magnetic Tape for Consumer Use(525-60, 625-50, 1125-60 and 1250-50 Systems) Part 8: PALplus Format for the 625-50 System
2001 CENELEC 0
5129 EN 50290-2-21 Communication cables - Part 2-21: Common design rules and construction - PVC insulation compounds - IncorporatesAmendment A1: 2007; Incorporating corrigendum February 2016
2001 CENELEC 0
5130 EN 50377-2-1 Connectors Sets and Interconnect Components to Be Used in Optical Fibre Communication Systems - ProductSpecifications Part 2-1: Type FC-PC Terminated on IEC 60793-2 Category B1 Singlemode Fibre - IncorporatingCorrigendum March 2002
2001 CENELEC 0
5131 EN 60512-23-3 Electromechanical Components for Electronic Equipment - Basic Testing Procedures and Measuring Methods Part 23-3:Test 23c: Shielding Effectiveness of Connectors and Accessories - Incorporating Corrigendum April 2003
2001 CENELEC 0
5132 EN 62005-3 Reliability of Fibre Optic Interconnecting Devices and Passive Components - Part 3: Relevant Tests for Evaluating FailureModes and Failure Mechanisms for Passive Components
2001 CENELEC 0
5133 EN 60034-18-22
Rotating Electrical Machines Part 18-22: Functional Evaluation of Insulation Systems - Test Procedures for Wire-WoundWindings - Classification of Changes and Insulation Component Substitutions
2001 CENELEC 0
5134 EN 61643-21 Low voltage surge protective devices Part 21: Surge protective devices connected to telecommunications and signallingnetworks - Performance requirements and testing methods - Incorporates Amendment A2: 2013
2001 CENELEC 0
5135 EN 50289-1-2 Communication Cables - Specifications for Test Methods Part 1-2: Electrical Test Methods - DC Resistance 2001 CENELEC 05136 EN 50182 Conductors for overhead lines - Round wire concentric lay stranded conductors - Incorporating corrigendum July 2013 2001 CENELEC 05137 ROBT-005 Information Concerning Plugs for Household Appliances Covered by CLC/TC 61 Used in the Various CENELEC
Countries2001 CENELEC 0
5138 EN 50341-3 Overhead electrical lines exceeding AC 45 kV Part 3: Set of National Normative Aspects - Incorporating Corrigenda April2006, October 2006, February 2009, June 2010 and October 2010; Remains Current
2001 CENELEC 0
5139 EN 61834-9 Recording - Helical-Scan Digital Video Cassette Recording System Using 6,35 mm Magnetic Tape for Consumer Use(525-60, 625-50, 1125-60 and 1250-50 Systems) Part 9: DVB Format
2001 CENELEC 0
5140 EN 50289-1-5 Communication Cables - Specifications for Test Methods Part 1-5: Electrical Test Methods - Capacitance 2001 CENELEC 05141 EN 50065-4-1 Signalling on Low-Voltage Electrical Installations in the Frequency Range 3 kHz to 148,5 kHz Part 4-1: Low Voltage
Decoupling Filters - Generic Specification - Ratified European Text:01/08/20012001 CENELEC 0
5142 EN 60934 Circuit-breakers for equipment (CBE) - Incorporates Amendment A2: 2013 2001 CENELEC 05143 EN 60322 Railway Applications - Electric Equipment for Rolling Stock - Rules for Power Resistors of Open Construction 2001 CENELEC 05144 EN 61834-7 Recording - Helical-Scan Digital Video Cassette Recording System Using 6,35 mm Magnetic Tape for Consumer Use
(525-60, 625-50, 1125-60 and 1250-50 Systems) Part 7: EDTV2 Format2001 CENELEC 0
5145 EN 50289-3-2 Communication Cables - Specifications for Test Methods Part 3-2: Mechanical Test Methods - Tensile Strength andElongation for Conductor
2001 CENELEC 0
5146 EN 61828 Ultrasonics - Focusing Transducers - Definitions and Measurement Methods for the Transmitted Fields 2001 CENELEC 0
5147 EN 50289-4-6 Communication Cables - Specifications for Test Methods Part 4-6: Environmental Test Methods - Temperature Cycling 2001 CENELEC 05148 HD 245.3 S3 Letter Symbols to Be Used in Electrical Technology Part 3: Logarithmic Quantities and Units 2001 CENELEC 05149 EN 60747-5-2 Discrete Semiconductor Devices and Integrated Circuits - Part 5-2: Optoelectronic Devices - Essential Ratings and
Characteristics - Incorporates Amendment A1: 2002; Remains Current2001 CENELEC 0
5150 EN 50065-4-2 Signalling on low voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz Part4-2: Low voltage decoupling filters - Safety requirements - Incorporates Amendments A1: 2003 and A2: 2005
2001 CENELEC 0
5151 EN 61478 Live Working - Ladders of Insulating Material - Incorporates Amendment A1: 2003 2001 CENELEC 05152 EN 50289-3-1 Communication Cables - Specifications for Test Methods Part 3-1: Mechanical Test Methods - General Requirements 2001 CENELEC 05153 EN 60034-5 Rotating Electrical Machines Part 5: Degrees of Protection Provided by the Integral Design of Rotating Electrical Machines
(IP Code) - Classification - Incorporates Amendment A1: 20072001 CENELEC 0
5154 EN 61347-2-8 Lamp controlgear Part 2-8: Particular requirements for ballasts for fluorescent lamps - Incorporates Amendment A1: 2001;Incorporates Corrigenda July 2003, December 2010 and August 2012
2001 CENELEC 0
5155 EN 61753-2-3 Fibre Optic Interconnecting Devices and Passive Components Performance Standard - Part 2-3: Non-Connectorised SingleMode 1xN and 2xN Non-Wavelength-Selective Branching Devices for Category U - Uncontrolled Environment
2001 CENELEC 0
5156 EN 60512-1 Connectors for Electronic Equipment - Tests and Measures Part 1: General 2001 CENELEC 05157 EN 50289-3-6 Communication Cables - Specifications for Test Methods Part 3-6: Mechanical Test Methods - Impact Resistance of the
Cable2001 CENELEC 0
5158 EN 50289-3-7 Communication Cables - Specification for Test Methods Part 3-7: Mechanical Test Methods - Abrasion Resistance of theCable Sheath
2001 CENELEC 0
5159 EN 60684-3-100 TO 105
Flexible Insulating Sleeving Part 3: Specifications for Individual Types of Sleeving Sheets 100 to 105: Extruded PVCSleeving
2001 CENELEC 0
5160 EN 61817 Household portable appliances for cooking, grilling and similar use - Methods for measuring performance - IncorporatesAmendment A1: 2004
2001 CENELEC 0
5161 EN 61691-2 Behavioural Languages Part 2: VHDL Multilogic System for Model Interoperability 2001 CENELEC 05162 EN 60317-0-6 Specifications for particular types of winding wires Part 0-6: General requirements Glass-fibre wound resin or varnish
impregnated, bare or enamelled round copper wire - Incorporates Amendment A1: 20062001 CENELEC 0
5163 EN 60146-2 Semiconductors convertors Part 2: Self-commutated semiconductor converters including direct d.c. converters 2000 CENELEC 05164 EN 61966-3 Multimedia Systems and Equipment - Colour Measurement and Management Part 3: Equipment Using Cathode Ray Tubes 2000 CENELEC 05165 EN 61000-3-11 Electromagnetic Compatibility (EMC) Part 3-11: Limits - Limitation of Voltage Changes, Voltage Fluctuations and Flicker
in Public Low-Voltage Supply Systems - Equipment with Rated Current Greater than or Equal to 75 A and Subject toConditional Connection
2000 CENELEC 0
5166 EN 61338-1-3 Waveguide Type Dielectric Resonators - Part 1-3: General Information and Test Conditions - Measurement Method ofComplex Relative Permittivity for Dielectric Resonator Materials at Microwave Frequency test conditions - MeasurementMethod of Complex Relati
2000 CENELEC 0
5167 EN 60368-4 Piezoelectric Filters of Assessed Quality Part 4: Sectional Specification - Capability Approval 2000 CENELEC 05168 EN 60368-1 Piezoelectric filters of assessed quality Part 1: Generic specification - Incorporates Amendment A1: 2004 2000 CENELEC 05169 EN 61834-3 Recording - Helical-Scan Digital Video Cassette Recording System Using 6,35 mm Magnetic Tape for Consumer Use
(525-60, 625-50, 1125-60 and 1250-50 Systems) Part 3: HD Format for 1125-60 and 1250-50 Systems2000 CENELEC 0
5170 EN 50090-8 Home and Building Electronic Systems (HBES) Part 8: Conformity Assessment of Products 2000 CENELEC 05171 EN 60534-3-1 Industrial-Process Control Valves Part 3-1: Dimensions - Face-To-Face Dimensions for Flanged, Two-Way, Globe-Type,
Straight Pattern and Centre-To-Face Dimensions for Flanged, Two-Way, Globe-Type, Angle Pattern Control Valves -Incorporating Corrigendum Ju
2000 CENELEC 0
5172 EN 61909 Audio Recording - Minidisc System 2000 CENELEC 05173 EN 60244-15 Methods of Measurement for Radio Transmitters - Part 15: Amplitude-Modulated Transmitters for Sound Broadcasting 2000 CENELEC 05174 EN 61076-7 Connectors for Use in d.c., Low-Frequency Analogue and Digital High Speed Data Applications Part 7: Cable Outlet
Accessories with Assessed Quality, Including Qualification and Capability Approval - Sectional Specification2000 CENELEC 0
5175 EN 50183 Conductors for Overhead Lines Aluminium-Magnesium-Silicon Alloy Wires 2000 CENELEC 05176 EN 61966-2-1 Multimedia Systems and Equipment - Colour Measurement and Management Part 2-1: Colour Management - Default RGB
Colour Space - sRGB - Incorporates Amendment A1: 20032000 CENELEC 0
5177 EN 50303 Group I, Category M1 Equipment Intended to Remain Functional in Atmospheres Endangered by Firedamp and/or CoalDust
2000 CENELEC 0
5178 EN 61966-4 Multimedia Systems and Equipment - Colour Measurement and Management Part 4: Equipment Using Liquid CrystalDisplay Panels
2000 CENELEC 0
5179 EN 60216-4-3 Electrical Insulating Materials - Thermal Endurance Properties Part 4-3: Ageing Ovens - Multi-Chamber Ovens 2000 CENELEC 05180 EN 60320-2-1 Appliance Couplers for Household and Similar General Purposes Part 2-1: Sewing Machine Couplers 2000 CENELEC 05181 EN 61334-4-
511Distribution Automation Using Distribution Line Carrier Systems Part 4-511: Data Communication Protocols - SystemsManagement - CIASE Protocol
2000 CENELEC 0
5182 EN 60774-2 Helical-Scan Video Tape Cassette System Using 12,65 mm (0,5 in) Magnetic Tape on Type VHS - PART 2:FM AudioRecording
2000 CENELEC 0
5183 EN 61904 Video Recording Helical-Scan Digital Component Video Cassette Recording Format Using 12,65 mm Magnetic Tape andIncorporating Data Compression (Format Digital-L)
2000 CENELEC 0
5184 EN 61223-3-4 Evaluation and Routine Testing in Medical Imaging Departments Part 3-4: Acceptance Tests Imaging Performance ofDental X-Ray Equipment
2000 CENELEC 0
5185 EN 60204-11 Safety of machinery - Electrical equipment of machines Part 11: Requirements for HV equipment for voltages above 1 000V a.c. or 1 500 V d.c. and not exceeding 36 kV - Incorporating corrigendum February 2010
2000 CENELEC 0
5186 EN 61076-3-100
Connectors for use in d.c., low-frequency analogue and digital high speed data applications Part 3-100: Rectangularconnectors with assessed quality Detail specification for a range of shielded connectors with trapezoidal-shaped shells andnon-removable r
2000 CENELEC 0
5187 EN 60843-4 Helical-Scan Video Tape Cassette System Using 8 mm Magnetic Tape (8 mm Video) Part 4: Video Subcode (VSC) 2000 CENELEC 05188 EN 61334-6 Distribution Automation Using Distribution Line Carrier Systems Part 6: A-XDR Encoding Rule 2000 CENELEC 05189 EN 60531 Household Electric Thermal Storage Room Heaters Methods for Measuring Performance 2000 CENELEC 05190 EN 61000-4-27 Electromagnetic compatibility (EMC) Part 4-27: Testing and measurement techniques - Unbalance, immunity test for
equipment with input current not exceeding 16 A per phase - Incorporates Amendment A1: 20092000 CENELEC 0
5191 EN 45510-2-4 Guide for Procurement of Power Station Equipment - Part 2-4: Electrical Equipment - High Power Static Convertors 2000 CENELEC 05192 EN 50189 Conductors for Overhead Lines Zinc Coated Steel Wires 2000 CENELEC 05193 EN 60044-7 Instrument Transformers - Part 7: Electronic Voltage Transformers - Remains Current 2000 CENELEC 05194 EN 61000-4-23 Electromagnetic Compatibility (EMC) Part 4-23: Testing and Measurement Techniques - Test Methods for Protective
Devices for HEMP and Other Radiated Disturbances2000 CENELEC 0
5195 EN 60368-4-1 Piezoelectric Filters of Assessed Quality Part 4-1: Blank Detail Specification - Capability Approval 2000 CENELEC 05196 EN 61000-4-28 Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency,
immunity test for equipment with input current not exceeding 16 A per phase - Incorporates Amendment A2: 20092000 CENELEC 0
5197 EN 60432-2 Incandescent Lamps - Safety Specifications Part 2: Tungsten Halogen Lamps for Domestic and Similar General LightingPurposes - Incorporates Amendment A2: 2012
2000 CENELEC 0
5198 EN 61000-4-29 Electromagnetic Compatibility (EMC) Part 4-29: Testing and Measurement Techniques - Voltage Dips, Short Interruptionsand Voltage Variations on D.C. Input Power Port Immunity Tests
2000 CENELEC 0
5199 EN 60216-4-2 Electrical Insulating Materials - Thermal Endurance Properties Part 4-2: Ageing Ovens - Precision Ovens for Use up to 300Degrees Celsius
2000 CENELEC 0
5200 EN 61753-2-1 Fibre Optic Interconnecting Devices and Passive Components Performance Standard Part 2-1: Fibre Optic ConnectorsTerminated on Single-Mode Fibre For Category U - Uncontrolled Environment
2000 CENELEC 0
5201 EN 60335-2-64 Safety of household and similar electrical appliances Part 2-64: Particular requirements for commercial electric kitchenmachines - Incorporates Amendment A1: 2002
2000 CENELEC 0
5202 EN 60999-1 Connecting Devices - Electrical Copper Conductors Safety Requirements for Screw-Type and Screwless-Type ClampingUnits Part 1: General Requirements and Particular Requirements for Clamping Units for Conductors from 0,2 mm2 up to35 mm2 (Included)
2000 CENELEC 0
5203 EN 61094-1 Measurement Microphones Part 1: Specifications for Laboratory Standard Microphones 2000 CENELEC 05204 EN 61754-16 Fibre Optic Connector Interfaces Part 16: Type PN Connector Family 2000 CENELEC 05205 EN 60947-5-6 Low-Voltage Switchgear and Controlgear Part 5-6: Control Circuit Devices and Switching Elements DC Interface for
Proximity Sensors and Switching Amplifiers (NAMUR)2000 CENELEC 0
5206 EN 61131-7 Programmable Controllers Part 7: Fuzzy Control Programming 2000 CENELEC 05207 EN 60191-6-3 Mechanical Standardization of Semiconductor Devices - Part 6-3: General Rules for the Preparation of Outline Drawings of
Surface Mounted Semiconductor Device Packages - Measuring Methods for Package Dimensions of Quad Flat Packs(QFP)
2000 CENELEC 0
5208 EN 60264-3-1 Packaging of winding wires Part 3-1: Taper barrelled delivery spools Basic dimensions - Incorporates Amendment A1:2003
2000 CENELEC 0
5209 HD 627 S1/A1 Multicore and Multipair Cable for Installation Above and Below Ground 2000 CENELEC 05210 EN 61300-3-36 Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-36:
Examinations and Measurements - Measurement Methods for the Inside and Outside Diameters of Fibre Optic ConnectorFerrules
2000 CENELEC 0
5211 EN 50320 Digital Audio Broadcasting System - Specification of the DAB Command Set for Receivers (DCSR) 2000 CENELEC 05212 EN 60580 Medical Electrical Equipment Dose Area Product Meters 2000 CENELEC 05213 EN 61926-1 Design Automation - Part 1: Standard Test Language for All Systems - Common Abbreviated Test Language for All
Systems (C/ATLAS)2000 CENELEC 0
5214 EN 60672-2 Ceramic and Glass Insulating Materials Part 2: Methods of Test 2000 CENELEC 05215 EN 61683 Photovoltaic Systems - Power Conditioners - Procedure for Measuring Efficiency 2000 CENELEC 05216 EN 60432-1 Incandescent lamps - Safety specifications Part 1: Tungsten filament lamps for domestic and similar general lighting
purposes - Incorporates Amendment A2: 20122000 CENELEC 0
5217 EN 61300-2-40 Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures Part 2-40: Tests -Screen Testing of Attenuation of Single-Mode Tuned Angles Optical Connectors
2000 CENELEC 0
5218 EN 60512-20-2 Electromechanical Components for Electronic Equipment Basic Testing Procedures and Measuring Methods Part 20-2:Test 20b - Flammability Tests - Fireproofness
2000 CENELEC 0
5219 EN 61834-6 Recording - Helical-Scan Digital Video Cassette Recording System Using 6,35 mm Magnetic Tape for Consumer Use(525-60, 625-50, 1125-60 and 1250-50 Systems) Part 6: SDL Format
2000 CENELEC 0
5220 EN 60244-1 Methods of Measurement for Radio Transmitters Part 1: General Characteristics for Broadcast Transmitters 2000 CENELEC 05221 EN 61195 Double-capped fluorescent lamps - Safety specifications - Incorporates Amendment A2: 2015 1999 CENELEC 05222 EN 61595-3 Multichannel Digital Audio Tape Recorder (DATR), Reel-To-Reel System, for Professional Use Part 3: 24-Bit Operation
for 16-Bit Media1999 CENELEC 0
5223 HD 22.11S1/A1
AMD 1 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 11: EVA Cords and FlexibleCables
1999 CENELEC 0
5224 EN 60068-2-74 Environmental Testing Part 2: Tests - Test Xc: Fluid Contamination - Incorporates Amendment A1: 2018 1999 CENELEC 05225 EN 50285 Energy Efficiency of Electric Lamps for Household Use - Measurement Methods 1999 CENELEC 05226 EN 61599 Videodisk Players - Methods of Measurement 1999 CENELEC 05227 R217-016 Pinnacles Component Information Standard 1.2 PCIS Sample Documents 1999 CENELEC 05228 HD 22.3 S3/A1 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 3: Heat Resistant Silicone Rubber Insulated
Cables1999 CENELEC 0
5229 EN 60704-2-11 Household and Similar Electrical Appliances - Test Code for the Determination of Airborne Acoustical Noise - Part 2-11:Particular Requirements for Electrically Operated Food Preparation Appliances
1999 CENELEC 0
5230 EN 60068-5-2 Environmental Testing Part 5: Guide to Drafting of Test Methods Terms and Definitions 1999 CENELEC 0
5231 EN 61868 Mineral insulating oils Determination of kinematic viscosity at very low temperatures 1999 CENELEC 05232 EN 60130-17 Connectors for Frequencies Below 3 MHz - Part 17: Detail Specification for Interconnection Devices Which Permit Multi-
Directional Mating, For Use with Rechargeable Batteries1999 CENELEC 0
5233 EN 60264-3-2 Packaging of Winding Wires Part 3-2: Taper Barrelled Delivery Spools - Specification for Returnable Spools Made fromThermoplastic Materials
1999 CENELEC 0
5234 EN 61249-3-5 Materials for Printed Boards and Other Interconnecting Structures - Part 3-5: Sectional Specification Set for UnreinforcedBase Materials, Clad and Unclad (Intended for Flexible Printed Boards) - Transfer Adhesive Films for Flexible PrintedBoards
1999 CENELEC 0
5235 EN 61223-3-1 Evaluation and Routine Testing in Medical Imaging Departments - Part 3-1: Acceptance Tests - Imaging Performance ofX-Ray Equipment for Radiographic and Radioscopic Systems
1999 CENELEC 0
5236 HD 628 S1 AMD prA1 Test Methods for Accessories for Power Cables with Rated Voltage from 3,6/6 kV (Um = 7,2kV) up to andIncluding 20,8/36kV (Um = 42kV)
1999 CENELEC 0
5237 EN 60512-6-5 Electromechanical Components for Electronic Equipment - Basic Testing Procedures and Measuring Methods Part 6:Dynamic Stress Tests Section 5: Test 6e: Random Vibration
1999 CENELEC 0
5238 EN 60603-14 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 14: Detail Specification for CircularConnectors for Low-Frequency Audio and Video Applications Such as Audio, Video and Audio-Visual Equipment
1999 CENELEC 0
5239 EN 61702 Rating of Direct Coupled Photovoltaic (PV) Pumping Systems 1999 CENELEC 05240 EN 61993-1 Maritime Navigation and Radiocommunication Equipment and Systems Part 1: Shipborne Automatic Transponder System
Installation Using VHF Digital Selective Calling (DSC) Techniques Operational and Performance Requirements, Methodsof Testing and Required Tes
1999 CENELEC 0
5241 EN 61249-3-4 Materials for Printed Boards and Other Interconnecting Structures Part 3-4: Sectional Specification Set for UnreinforcedBase Materials, Clad and Unclad (Intended for Flexible Printed Boards) - Adhesive Coated Flexible Polyimide Film
1999 CENELEC 0
5242 EN 50286 Electrical Insulating Protective Clothing for Low-Voltage Installations 1999 CENELEC 05243 EN 61943 Integrated Circuits - Manufacturing Line Approval Application Guideline 1999 CENELEC 05244 EN 60938-1 Fixed inductors for electromagnetic interference suppression Part 1: Generic specification - Incorporates Amendment A1:
20071999 CENELEC 0
5245 EN 61000-4-17 Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power portimmunity test - Incorporates Amendment A2: 2009
1999 CENELEC 0
5246 EN 60309-1 Plugs, Socket-Outlets and Couplers for Industrial Purposes Part 1: General Requirements - Incorporates Amendment A2:2012
1999 CENELEC 0
5247 EN 61620 Insulating liquids Determination of the dielectric dissipation factor by measurement of the conductance and capacitanceTest method
1999 CENELEC 0
5248 EN 60938-2-2 Fixed Inductors for Electromagnetic Interference Suppression Part 2-2: Blank Detail Specification Inductors for WhichSafety Tests Are Required (Only)
1999 CENELEC 0
5249 EN 61076-4-103
Connectors for Use in d.c. Low-Frequency Analogue and Digital High Speed Data Applications Part 4-103: Printed BoardConnectors with Assesed Quality - Detail Specification for Two-Part Connectors with Shielding and a Basic Grid of 2,5mm
1999 CENELEC 0
5250 EN 60193 Hydraulic turbines, storage pumps and pump-turbines Model acceptance tests 1999 CENELEC 05251 EN 60908 Audio Recording - Compact Disc Digital Audio System 1999 CENELEC 05252 EN 61249-3-3 Materials for Printed Boards and Other Interconnecting Structures Part 3-3: Sectional Specification Set for Unreinforced
Base Materials, Clad and Unclad (Intended for Flexible Printed Boards) Adhesive Coated Flexible Polyester Film1999 CENELEC 0
5253 EN 166101 Blank Detail Specification: Surface Acoustic Wave (SAW) filters - Capability approval 1999 CENELEC 05254 EN 61169-31 Radio-Frequency Connectors - Part 31: RF Coaxial Connectors with Inner Diameter of Outer Conductor 1,0 mm (0,039 in)
with Screw Coupling - Characterisyic Impedance - 50 ohms (Type 1,0)1999 CENELEC 0
5255 EN 60059 IEC standard current ratings - Incorporates Amendment A1: 2009 1999 CENELEC 05256 EN 61747-1 Liquid Crystal and Solid-State Display Devices - Part 1: Generic Specification - Incorporates Amendment A1: 2003 1999 CENELEC 05257 EN 61609 Microwave Ferrite Components Guide for the Drafting of Specifications 1999 CENELEC 0
5258 EN 61249-2-13 Materials for Printed Boards and Other Interconnecting Structures - Part 2-13: Sectional Specification Set for ReinforcedBase Materials, Clad and Unclad - Cyanate Ester Non-Woven Aramid Laminate of Defined Flammability, Copper-Clad
1999 CENELEC 0
5259 EN 60660 Insulators Tests on Indoor Post Insulators of Organic Material for Systems with Nominal Voltages Greater Than 1 kV up tobut Not Including 300 kV
1999 CENELEC 0
5260 EN 61300-2-45 Fibre Optic Interconnection Devices and Passive Components Basic Test and Measurement Procedures Part 2-45: Tests -Durability Test by Water Immersion
1999 CENELEC 0
5261 EN 60938-2-1 Fixed Inductors for Electromagnetic Interference Suppression Part 2-1: Blank Detail Specification Inductors for WhichSafety Tests Are Required - Assessment Level D
1999 CENELEC 0
5262 EN 61249-2-12 Materials for Printed Boards and Other Interconnecting Structures Part 2-12: Sectional Specification Set for ReinforcedBase Materials, Clad and Unclad - Epoxide Non-Woven Aramid Laminate of Defined Flammability, Copper-Clad
1999 CENELEC 0
5263 EN 60315-3 Methods of Measurement on Radio Receivers for Various Classes of Emission Part 3: Receivers for Amplitude-ModulatedSound-Broadcasting Emissions - Incorporates Amendment A1: 1999
1999 CENELEC 0
5264 HD 22.10S1/A1
AMD 1 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 10: EPR Insulated andPolyurethane Sheathed Flexible Cable
1999 CENELEC 0
5265 EN 61000-4-14 Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity testfor equipment with input current not exceeding 16 A per phase - Incorporates Amendment A2: 2009
1999 CENELEC 0
5266 EN 60068-2-11 Environmental Testing - Part 2: Tests - Test Ka: Salt Mist 1999 CENELEC 05267 EN 61209 Maritime Navigation and Radiocommunication Equipment and Systems - Integrated Bridge Systems (IBS) - Operational
and Performance Requirements, Methods of Testing and Required Test Results1999 CENELEC 0
5268 EN 186300 Sectional Specifications: Connector Sets for Optical Fibres and Cables Type MSC 1999 CENELEC 05269 EN 60609-2 Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump-turbines Part 2: Evaluation in Pelton turbines 1999 CENELEC 05270 EN 60068-2-77 Environmental Testing Part 2-77: Tests - Test 77: Body Strength and Impact Shock 1999 CENELEC 05271 EN 60068-2-13 Environmental Testing - Part 2: Tests - Test M: Low Air Pressure 1999 CENELEC 05272 HD 22.9 S2/A1 AMD 1 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 9: Single Core Non-Sheathed
Cables for Fixed Wiring Having Low Emission of Smoke and Corrosive Gases1999 CENELEC 0
5273 EN 60068-2-41 Environmental Testing Part 2: Tests - Test Z/BM: Combined Dry Heat/Low Air Pressure Tests 1999 CENELEC 05274 EN 61114-1 Receiving Antennas for Satellite Broadcast Transmissions in the 11/12 GHz Band - Part 1: Electrical Measurements 1999 CENELEC 05275 EN 45510-2-2 Guide for Procurement of Power Station Equipment - Part 2-2: Electrical Equipment - Uninterruptible Power Supplies 1999 CENELEC 05276 EN 60633 Terminology for high-voltage direct current (HVDC) transmission - Incorporates Amendment A2: 2015 1999 CENELEC 05277 EN 61000-2-10 Electromagnetic Compatibility (EMC) Part 2-10: Environment - Description of HEMP Environment - Conducted
Disturbance1999 CENELEC 0
5278 EN 61512-1 Batch Control - Part 1: Models and Terminology 1999 CENELEC 05279 EN 60068-2-48 Environmental Testing Part 2: Tests - Guidance on the Application of the Tests of IEC 60068 to Simulate the Effects of
Storage1999 CENELEC 0
5280 EN 61754-12 Fibre Optic Connector Interfaces Part 12: Type FS Connector Family 1999 CENELEC 05281 EN 60966-1 Radio Frequency and Coaxial Cable Assemblies - Part 1: Generic Specification - General Requirements and Test Methods 1999 CENELEC 05282 EN 60309-2 Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and
contact-tube accessories - Incorporates Amendment A2: 20121999 CENELEC 0
5283 EN 175201-804 Detail Specification: Circular Connectors - Round Contacts, Size Diameter 1,6 mm, Threaded Coupling 1999 CENELEC 05284 EN 61076-4-
104Connectors for Use in d.c. Low-Frequency Analogue and Digital High-Speed Data Applications - Part 4-104: PrintedBoard Connectors with Assessed Quality - Detail Specification for Two-Part Modular Connectors, Basic Grid of 2,0 mm,with Terminations on a Mu
1999 CENELEC 0
5285 EN 61747-2 Liquid crystal and solid-state display devices Part 2: Liquid crystal display modules Sectional specification 1999 CENELEC 05286 EN 60834-1 Teleprotection Equipment of Power Systems Performance and Testing Part 1: Command Systems 1999 CENELEC 05287 EN 60938-2 Fixed Inductors for Electromagnetic Interference Suppression Part 2: Sectional Specification - Incorporates Amendment
A1: 20071999 CENELEC 0
5288 EN 60522 Determination of the Permanent Filtration of X-Ray Tube Assemblies 1999 CENELEC 05289 EN 61300-3-17 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 3-17:
Examinations and Measurements Endface Angle of Angle-Polished Ferrules1999 CENELEC 0
5290 EN 60684-3-409
Flexible Insulating Sleeving Part 3: Specifications for Individual Types of Sleeving Sheet 409: Glass Textile Sleeving withPolyurethane (PUR)-Based Coating
1999 CENELEC 0
5291 HD 22.14S1/A1
AMD 1 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 14: Cords for ApplicationsRequiring High Flexibility
1999 CENELEC 0
5292 EN 60068-3-2 Environmental Testing - Part 3: Background Information Section 2: Combined Temperature/Low Air Pressure Tests 1999 CENELEC 05293 EN 60368-2-2 Piezoelectric Filters - Part 2: Guide to the Use of Piezoelectric Filters - Section 2: Piezoelectric Ceramic Filters 1999 CENELEC 05294 EN 175101-802 Detail Specification: Two-Part Connectors for Printed Boards for High Number of Contracts with Basic Grid of 2,54 mm
on 3 or 4 Rows1999 CENELEC 0
5295 EN 60512-11-1 Electromechanical Components for Electronic Equipment Basic Testing Procedures and Measuring Methods Part 11:Climatic Tests Section 1: Test 11a - Climatic Sequence
1999 CENELEC 0
5296 EN 61628-2 Corrugated pressboard and presspaper for electrical purposes Part 2: Methods of test - Incorporates Amendment A1: 2007 1999 CENELEC 05297 HD 22.4 S3/A1 AMD 1 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 4: Cords and Flexible Cables 1999 CENELEC 05298 EN 61803 Determination of power losses in high-voltage direct current (HVDC) converter stations with line-commutated converters -
Incorporating Corrigendum October 1999; Incorporates Amendment A1: 2010; Incorporates Amendment A2: 20161999 CENELEC 0
5299 HD 22.12S1/A1
AMD 1 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 12: Heat Resistant EPR Cords andFlexible Cables
1999 CENELEC 0
5300 R086-001 Guidance for Technology Audit of Fibre Optic Connector Kits and Terminated Connectors 1999 CENELEC 05301 EN 60068-2-40 Environmental Testing Part 2: Tests - Test Z/AM: Combined Cold/Low Air Pressure Tests 1999 CENELEC 05302 EN 61964 Integrated Circuits - Memory Devices Pin Configurations 1999 CENELEC 05303 EN 60264-3-4 Packaging of Winding Wires Part 3-4: Taper Barrelled Delivery Spools - Basic Dimensions of Containers for Taper
Barrelled Delivery Spools1999 CENELEC 0
5304 EN 62005-4 Reliability of Fibre Optic Interconnecting Devices and Passive Optical Components Part 4: Product Screening 1999 CENELEC 05305 EN 60264-3-5 Packaging of Winding Wires Part 3-5: Taper Barrelled Delivery Spools - Specification for Spool Containers Made from
Thermoplastic Material1999 CENELEC 0
5306 EN 62019 Electrical accessories - Circuit-breakers and similar equipment for household use - Auxiliary contact units - IncorporatesAmendments A12: 2014
1999 CENELEC 0
5307 EN 60191-3 Mechanical Standardization of Semiconductor Devices Part 3: General Rules for the Preparation of Outline Drawings ofIntegrated Circuits
1999 CENELEC 0
5308 EN 60512-11-8 Electromechanical components for electronic equipment Basic testing procedures and measuring methods Part 11: Climatictests Section 8: Test 11h - Sand and dust
1999 CENELEC 0
5309 EN 61316 Industrial Cable Reels 1999 CENELEC 05310 EN 61169-32 Radio-Frequency Connectors - Part 32: RF Coaxial Connectors with Inner Diameter of Outer Conductor 1,85 mm (0,072
in) with Screw Coupling - Characteristic Impedance 50 ohms (Type 1,85)1999 CENELEC 0
5311 EN 60674-3-2 Specification for Plastic Films for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 2: Requirementsfor Balanced Biaxially Oriented Polyethylene Terephthalate (PET) Films Used for Electrical Insulation
1998 CENELEC 0
5312 EN 60674-3-3 Specification for Plastic Films for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 3: Requirementsfor Polycarbonate (PC) Films Used for Electrical Insulation
1998 CENELEC 0
5313 EN 60110-1 Power Capacitors for Induction Heating Installations Part 1: General 1998 CENELEC 05314 EN 50256 Characteristics of DVB Receivers 1998 CENELEC 05315 EN 50157-2-3 Domestic and Similar Electronic Equipment Interconnection Requirements: AV Link - Part 2-3: System Oriented
Application1998 CENELEC 0
5316 EN 61854 Overhead Lines - Requirements and Tests for Spacers 1998 CENELEC 0
5317 EN 61300-3-40 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 3-40:Examinations and Measurements Extinction Ratio of a Polarization Maintaining (pm) Fibre Pigtailed Connector
1998 CENELEC 0
5318 EN 61834-5 Recording - Helical-Scan Digital Video Cassette Recording System Using 6,35 mm Magnetic Tape for Consumer Use(525-60, 625-50, 1125-60 and 1250-50 Systems) Part 5: The Character Information System
1998 CENELEC 0
5319 EN 60320-2-2 Appliance Couplers for Household and Similar General Purposes Part 2-2: Interconnection Couplers for Household andSimilar Equipment
1998 CENELEC 0
5320 EN 60947-5-5 Low-voltage switchgear and controlgear Part 5-5: Control circuit devices and switching elements Electrical emergency stopdevice with mechanical latching function - Incorporates Amendment A2: 2017
1998 CENELEC 0
5321 EN 61196-3 Radio Frequency Cables Part 3: Sectional Specification for Coaxial Cables for Local Area Networks 1998 CENELEC 05322 EN 61061-3-1 Non-Impregnated Densified Laminated Wood for Electrical Purposes Part 3: Specifications for Individual Materials Sheets
1: Sheets Produced from Beech Veneer1998 CENELEC 0
5323 EN 60601-2-40 Medical Electrical Equipment Part 2-40: Particular Requirements for the Safety of Electromyographs and Evoked ResponseEquipment
1998 CENELEC 0
5324 EN 61835 Helical-Scan Digital Component Video Cassette Recording System Using 12,65 mm (0,5 in) Magnetic Tape - Format D-5 1998 CENELEC 05325 EN 60684-3-
151Flexible Insulating Sleeving Part 3: Specifications for Individual Types of Sleeving Sheet 151: Extruded PVC/NitrileRubber - General Purpose
1998 CENELEC 0
5326 EN 60454-3-1 Pressure-Sensitive Adhesive Tapes for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 1: PVCFilm Tapes with Pressure-Sensitive Adhesive - Incorporates Amendment A1: 2001
1998 CENELEC 0
5327 EN 61595-2 Multichannel Digital Audio Tape Recorder (DATR), Reel-To-Reel System, for Professional Use Part 2: Format B 1998 CENELEC 05328 EN 61846 Ultrasonics - Pressure Pulse Lithotripters - Characteristics of Fields 1998 CENELEC 05329 EN 61108-2 Maritime Navigation and Radiocommunication Equipment and Systems Global Navigation Satellite Systems (GNSS) Part
2: Global Navigation Satellite System (GLONASS) Receiver Equipment Performance Standards, Methods of Testing andRequired Test Results
1998 CENELEC 0
5330 EN 130201 Blank Detail Specification: Fixed Tantalum Capacitors with Solid Electrolyte, Porous Anode - SUB-FAMILY 3;Incorporates Amendment A2: 1998
1998 CENELEC 0
5331 EN 60320-2-3 Appliance Coupler for Household and Similar General Purposes Part 2-3: Appliance Coupler with a Degree of ProtectionHigher Than IPX0 - Incorporates Amendment A1: 2005
1998 CENELEC 0
5332 EN 61162-2 Maritime Navigation and Radiocommunication Equipment and Systems Digital Interfaces Part 2: Single Talker andMultiple Listeners, High-Speed Transmission
1998 CENELEC 0
5333 EN 50098-1 Customer Premises Cabling for Information Technology - Part 1: ISDN Basic Access - Incorporates Amendment A1: 2002;Incorporating Corrigendum January 2003
1998 CENELEC 0
5334 EN 61076-4-105
Connectors with Assessed Quality, for Use in d.c., Low Frequency Analogue and in Digital High-Speed Data ApplicationsPart 4: Printed Board Connectors Section 105: Detail Specification for 9 mm Circular Connector with 3 to 8 Contacts forUse in a Wide Ran
1998 CENELEC 0
5335 EN 61834-1 Recording - Helical-Scan Digital Video Cassette Recording System Using 6,35 mm Magnetic Tape for Consumer Use(525-60, 625-50, 1125-60 and 1250-50 Systems) - Part 1: General Specifications - Incorporates Amendment A1: 2001
1998 CENELEC 0
5336 EN 60603-12 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 12: Detail Specification for Dimensions,General Requirements and Tests for a Range of Sockets Designed for Use with Integrated Circuits
1998 CENELEC 0
5337 EN 60433 Insulators for Overhead Lines with a Nominal Voltage Above 1 kv Ceramic Insulators for a.c. Systems Characteristics ofInsulator Units of the Long Rod Type
1998 CENELEC 0
5338 EN 60679-5 Quartz Crystal Controlled Oscillators of Assessed Quality Part 5: Sectional Specification - Qualification Approval 1998 CENELEC 05339 EN 60674-3-1 Plastic films for electrical purposes Part 3: Specifications for individual materials Sheet 1: Biaxially oriented polypropylene
(PP) film for capacitors - Incorporates Amendment A1: 20111998 CENELEC 0
5340 EN 61280-2-4 Fibre Optic Communication Subsystem Basic Test Procedures - Part 2.4: Test Procedures for Digital Systems Bit-RateTolerance Measurement
1998 CENELEC 0
5341 EN 60454-3-6 Pressure-Sensitive Adhesive Tapes for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 6:Polycarbonate Film Tapes with Acrylic Thermoplastic Adhesive
1998 CENELEC 0
5342 EN 61395 Overhead Electrical Conductors Creep Test Procedures for Stranded Conductors 1998 CENELEC 0
5343 EN 61897 Overhead Lines - Requirements and Tests for Stockbridge Type Aeolian Vibration Dampers 1998 CENELEC 05344 EN 61834-4 Recording Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60,
625-50, 1125-60 and 1250-50 systems) Part 4: Pack header table and contents - Incorporates Amendment A1: 20111998 CENELEC 0
5345 HD 384.5.52S1/A1
AMD 1 Electrical Installations of Buildings Part 5: Selection and Erection of Electrical Equipment Chapter 52: WiringSystems - Incorporating Corrigendum September 1998
1998 CENELEC 0
5346 EN 60315-4 Methods of Measurement on Radio Receivers for Various Classes of Emission Part 4: Receivers for Frequency-ModulatedSound Broadcasting Emissions
1998 CENELEC 0
5347 EN 61188-1-2 Printed Boards and Printed Board Assemblies - Design and Use Part 1-2: Generic Requirements - Controlled Impedance 1998 CENELEC 05348 EN 60404-2 Magnetic materials - Part 2: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means
of an Epstein frame - Incorporates Amendment A1: 20081998 CENELEC 0
5349 EN 60603-5 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 5: Edge-Socket Connectors and Two-PartConnectors for Double-Sided Printed Boards with 2,54 mm (0,1 in) Spacing
1998 CENELEC 0
5350 EN 60679-5-1 Quartz Crystal Controlled Oscillators of Assessed Quality Part 5-1: Blank Detail Specification - Qualification Approval 1998 CENELEC 05351 EN 60503 Spools for Broadcast Videotape Recorders (VTRS) 1998 CENELEC 05352 EN 160101 Blank Detail Specification: Printed Board Assembly Modular Electronic Units of Assessed Quality Capability Approval 1998 CENELEC 05353 EN 61953 Diagnostic X-Ray Imaging Equipment Characteristics of Mammographic Anti-Scatter Grids 1998 CENELEC 05354 EN 60455-1 Resin Based Reactive Compounds Used for Electrical Insulation Part 1: Definitions and General Requirements 1998 CENELEC 05355 EN 60917-1 Modular Order for the Development of Mechanical Structures for Electronic Equipment Practices - Part 1: Generic
Standard - Incorporates Amendment A1: 20001998 CENELEC 0
5356 EN 61032 Protection of Persons and Equipment by Enclosures - Probes for Verification 1998 CENELEC 05357 EN 61280-1-1 Fibre Optic Communication Subsystem Basic Test Procedures Part 1-1: Test Procedures for General Communication
Subsystems Transmitter Output Optical Power Measurement for Single-Mode Optical Fibre Cable1998 CENELEC 0
5358 EN 60875-1-1 Fibre Optic Branching Devices Part 1-1: Blank Detail Specification 1998 CENELEC 05359 EN 61751 Laser Modules Used for Telecommunication Reliability Assessment 1998 CENELEC 05360 EN 60603-4 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 4: Two-Part Connectors for Printed Boards
Having Contacts Spaced at 1,91 mm (0,075 in) Centres and Staggered Terminations at that Same Spacing1998 CENELEC 0
5361 EN 153000 Generic Specification: Discrete Pressure Contact Power Semiconductor Devices (Qualification Approval) 1998 CENELEC 05362 EN 61847 Ultrasonics - Surgical Systems Measurement and Declaration of the Basic Output Characteristics 1998 CENELEC 05363 EN 60603-13 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 13: Detail Specification for Two-Part
Connectors of Assessed Quality, for Printed Boards for Basic Grid of 2,54 mm (0,1 in) with Free Connectors for Non-Accessible Insulation Displace
1998 CENELEC 0
5364 EN 50186-2 Live-Line Washing Systems for Power Installations with Nominal Voltages Above 1kV Part 2: National Annexes 1998 CENELEC 05365 EN 60118-14 Hearing Aids Part 14: Specification of a Digital Interface Device 1998 CENELEC 05366 EN 61830 Microwave Ferrite Components Measuring Methods for Major Properties 1998 CENELEC 05367 EN 60534-3-3 Industrial-Process Control Valves Part 3-3: Dimensions - End-to-End Dimensions for Buttweld, Two-Way, Globe-Type,
Straight Pattern Control Valves1998 CENELEC 0
5368 EN 166100 Sectional Specification: Surface Acoustic Wave (SAW) Filters 1998 CENELEC 05369 EN 61300-3-23 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 3-23:
Examination and Measurements Fibre Position Relative to Ferrule Endface1998 CENELEC 0
5370 EN 50281-2-1 Electrical Apparatus for Use in the Presence of Combustible Dust - Part 2-1: Test Methods - Methods of DeterminingMinimum Ignition Temperatures
1998 CENELEC 0
5371 EN 60442 Electric toasters for household and similar purposes - methods for measuring the performance - Incorporates AmendmentA1: 2003
1998 CENELEC 0
5372 EN 196403 Blank Detail Specification: Push Button Switches Assessment Level Y 1998 CENELEC 05373 EN 60360 Standard Method of Measurement of Lamp Cap Temperature Rise 1998 CENELEC 0
5374 EN 60603-8 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 8: Two-Part Connectors for Printed Boards, forBasic Grid of 2,54 mm (0,1 in), with Square Male Contacts of 0,63 mm X 0,63 mm
1998 CENELEC 0
5375 EN 60454-3-7 Pressure-Sensitive Adhesive Tapes for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 7:Polyimide Film Tapes with Pressure-Sensitive Adhesive
1998 CENELEC 0
5376 EN 61800-1 Adjustable Speed Electrical Power Drive Systems Part 1: General Requirements Rating Specifications for Low VoltageAdjustable Speed D.C. Power Drive Systems
1998 CENELEC 0
5377 EN 50186-1 CORR Live-Line Washing Systems for Power Installations with Nominal Voltages Above 1kV Part 1: CommonRequirements - Incorporating Corrigendum January 1999
1998 CENELEC 0
5378 EN 62053-61 Electricity Metering Equipment (a.c.) Particular Requirements Part 61: Power Consumption and Voltage Requirements 1998 CENELEC 05379 EN 61305-2 Household High-Fidelity Audio Equipment and Systems Methods of Measuring and Specifying the Performance Part 2:
FM Radio Tuners1998 CENELEC 0
5380 EN 61234-2 Electrical Insulating Materials Methods of Test for Hydrolytic Stability Part 2: Moulded Thermosets 1998 CENELEC 05381 EN 60603-10 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 10: Two-Part Connectors for Printed Boards
for Basic Grid of 2,54 mm (0,1 in), Inverted Type1998 CENELEC 0
5382 EN 60630 Maximum lamp outliners for incandescent lamps - Incorporates Amendment A7: 2015 1998 CENELEC 05383 EN 60679-4 Quartz Crystal Controlled Oscillators of Assessed Quality Part 4: Sectional Specification - Capability Approval 1998 CENELEC 05384 EN 60081 Double-capped fluorescent lamps - Performance specifications - Incorporates Amendment A6: 2017 1998 CENELEC 05385 EN 61012 Filters for the Measurement of Audible Sound in the Presence of Ultrasound 1998 CENELEC 05386 EN 130202 Blank Detail Specification: Fixed Tantalum Capacitors with Non-Solid Electrolyte, Porous Anode (Sub-Family 2) 1998 CENELEC 05387 EN 61300-2-41 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 2-41: Tests -
Screen Testing of Attenuation of Single-Mode Tuned Non-Angled Optical Fibre Connectors1998 CENELEC 0
5388 EN 60512-14-7 Electromechanical Components for Electronic Equipment Basic Testing Procedures and Measuring Methods Part 14:Sealing Tests Section 7: Test 14g: Impacting Water
1998 CENELEC 0
5389 EN 60870-5-103
Telecontrol Equipment and Systems Part 5-103: Transmission Protocols Companion Standard for the Informative Interfaceof Protection Equipment
1998 CENELEC 0
5390 EN 60603-2 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 2: Detail Specification for Two-PartConnectors with Assessed Quality, for Printed Boards, for Basic Grid of 2,54 mm (0,1 in) with Common MountingFeatures - Incorporates Amendment A1
1998 CENELEC 0
5391 EN 61334-4-61 Distribution Automation Using Distribution Line Carrier Systems Part 4-61: Data Communication Protocols - NetworkLayer Connectionless Protocol
1998 CENELEC 0
5392 EN 50157-2-2 Domestic and Similar Electronic Equipment Interconnection Requirements: AV.Link Part 2-2: Basic System OrientedCommands
1998 CENELEC 0
5393 EN 61603-3 Transmission of Audio and/or Video and Related Signals Using Infra-Red Radiation Part 3: Transmission Systems forAudio Signals for Conference and Similar Systems - Remains Current
1998 CENELEC 0
5394 EN 62020 Electrical Accessories Residual Current Monitors for Household and Similar Uses (RCMs) - Incorporates Amendment A1:2005
1998 CENELEC 0
5395 EN 61580-4 Methods of Measurement for Waveguides Part 4: Attenuation of Waveguide and Waveguide Assemblies 1998 CENELEC 05396 EN 50262 Cable glands for electrical installations - Incorporates Amendments A1: 2001 and A2: 2004 1998 CENELEC 05397 EN 61834-2 Recording - Helical-Scan Digital Video Cassette Recording System Using 6,35 mm Magnetic Tape for Consumer Use
(525-60, 625-50, 1125-60 and 1250-50 Systems) Part 2: SD Format for 525-60 and 625-50 Systems1998 CENELEC 0
5398 EN 60674-3-7 Specification for Plastic Films for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 7: Requirementsfor Fluoroethylene-Propylene (FEP) Films Used for Electrical Insulation
1998 CENELEC 0
5399 EN 61290-6-1 Optical Fibre Amplifiers - Basic Specification Part 6-1: Test Methods for Pump Leakage Parameters Optical Demultiplexer 1998 CENELEC 05400 EN 50157-2-1 Domestic and Similar Electronic Equipment Interconnection Requirements: AV.Link - Part 2-1: Signal Quality Matching
and Automatic Selection of Source Devices1998 CENELEC 0
5401 EN 61333 Marking on U and E Ferrite Cores 1998 CENELEC 0
5402 EN 60799 Electrical Accessories Cord Sets and Interconnection Cord Sets 1998 CENELEC 05403 EN 61334-4-33 Distribution Automation Using Distribution Line Carrier Systems Part 4-33: Data Communication Protocols Data Link
Layer - Connection Oriented Protocol1998 CENELEC 0
5404 EN 50157-1 Domestic and Similar Electronic Equipment Interconnection Requirements: AV.Link - Part 1: General 1998 CENELEC 05405 EN 60603-9 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 9: Two-Part Connectors for Printed Boards,
Backpanels and Cable Connectors, Basic Grid of 2,54 mm (0,1 in)1998 CENELEC 0
5406 EN 61675-1 Radionuclide imaging devices Characteristics and test conditions Part 1: Positron emission tomographs - IncorporatesAmendment A1: 2008
1998 CENELEC 0
5407 EN 60870-6-701
Telecontrol Equipment and Systems Part 6-701: Telecontrol Protocols Compatible with ISO Standards and ITU-TRecommendations Functional Profile for Providing the TASE.1 Application Service in End Systems
1998 CENELEC 0
5408 EN 60704-2-7 Household and Similar Electrical Appliances Test Code for the Determination of Airborne Acoustical Noise Part 2:Particular Requirements for Fans
1998 CENELEC 0
5409 HD 384.5.537S2
Electrical Installations of Buildings Part 5: Selection and Erection of Electrical Equipment Chapter 53: Switchgear andControlgear Section 537: Devices for Isolation and Switching
1998 CENELEC 0
5410 EN 60674-1 Specification for Plastic Films for Electrical Purposes Part 1: Definitions and General Requirements 1998 CENELEC 05411 EN 50209 Test of Insulation of Bars and Coils of High-Voltage Machines 1998 CENELEC 05412 EN 61466-2 Composite string insulator units for overhead lines with a nominal voltage greater than 1 kV Part 2: Dimensional and
electrical characteristics - Incorporates Amendment A2: 20181998 CENELEC 0
5413 EN 60603-3 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 3: Two-Part Connectors for Printed BoardsHaving Contacts Spaced at 2,54 mm (0,1 in) Centres and Staggered Terminations at that Same Spacing
1998 CENELEC 0
5414 EN 60603-1 Connectors for Frequencies Below 3 MHz for Use with Printed Boards - Part 1: Generic Specification - GeneralRequirements and Guide for the Preparation of Detail Specifications, with Assessed Quality
1998 CENELEC 0
5415 EN 61146-4 Video cameras (PAL/SECAM/NTSC) - Methods of measurement Part 4: Automatic functions of video cameras andcamera-recorders
1998 CENELEC 0
5416 EN 61345 UV Test for Photovoltaic (PV) Modules 1998 CENELEC 05417 EN 60603-6 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 6: Edge-Socket Connectors and Printed Board
Connectors with 2,54 mm (0,1 in) Contact Spacing for Single or Double-Sided Printed Boards of 1,6 mm (0,063 in)Nominal Thickness
1998 CENELEC 0
5418 HD 630.2.1 S3 Low-Voltage Fuses Part 2-1: Supplementary Requirements for Fuses for Use by Authorized Persons (Fuses Mainly forIndustrial Application) Sections I to V: Examples of Types of Standardized Fuses for Use by Authorized Persons
1998 CENELEC 0
5419 EN 62053-31 Electricity Metering Equipment (a.c.) Partricular Requirements Part 31: Pulse Output Devices for Electromechanical andElectronic Meters (Two Wires Only)
1998 CENELEC 0
5420 EN 60679-4-1 Quartz Crystal Controlled Oscillators of Assessed Quality Part 4-1: Blank Detail Specification - Capability Approval 1998 CENELEC 05421 EN 60684-3-
136Flexible Insulating Sleeving Part 3: Specification for Individual Types of Sleeving Sheet 136: Extruded FluorosiliconeSleeving - General Purpose
1998 CENELEC 0
5422 EN 61747-5 Liquid Crystal and Solid-State Display Devices Part 5: Environmental, Endurance and Mechanical Test Methods - RemainsCurrent
1998 CENELEC 0
5423 EN 61169-33 Radio-Frequency Connectors Part 33: Sectional Specification for Series BMA r.f. Connectors 1997 CENELEC 05424 EN 60317-47 Specifications for Particular Types of Winding Wires Part 47: Aromatic Polyimide Enamelled Rectangular Copper Wire,
Class 2401997 CENELEC 0
5425 EN 61249-8-8 Materials for Interconnection Structures Part 8: Sectional Specification Set for Non-Conductive Films and Coatings Section8: Temporary Polymer Coatings
1997 CENELEC 0
5426 EN 61237-4 Broadcast Video Tape Recorders - Methods of Measurement Part 4: Analogue Audio Performance Measurements 1997 CENELEC 05427 EN 61566 Measurement of Exposure to Radio-Frequency Electromagnetic Fields Field Strength in the Frequency Range 100 kHz to 1
GHz1997 CENELEC 0
5428 EN 60264-5-1 Packaging of winding wires Part 5-1: Cylindrical barrelled delivery spools with conical flanges Basic dimensions -Incorporates Amendment A1: 2003
1997 CENELEC 0
5429 EN 61067-2 Specification for Glass and Glass Polyester Fibre Woven Tapes Part 2: Methods of Test 1997 CENELEC 05430 EN 61169-36 Radio-Frequency Connectors Part 36: Sectional Specification for Microminiature r.f. Coaxial Connectors with Snap-On
Coupling - Characteristic Impedance 50 ohm (Type MCX)1997 CENELEC 0
5431 EN 61007 Transformers and Inductors for Use in Electronic and Telecommunication Equipment - Measuring Methods and TestProcedures
1997 CENELEC 0
5432 EN 61041-5 Non-Broadcast Video Tape Recorders - Methods of Measurement Part 5: High-Band Video Tape Recorders, IncludingThose Equipped with Y/C Video Connectors (NTSC/PAL)
1997 CENELEC 0
5433 EN 61189-1 Test Methods for Electrical Materials, Printed Boards and Other Interconnection Structures and Assemblies Part 1: GeneralTest Methods and Methodology - Incorporates Amendment A1: 2001
1997 CENELEC 0
5434 EN 61076-4-102
Connectors with Assessed Quality, for Use in d.c., Low-Frequency Analogue and in Digital High Speed Data ApplicationsPart 4: Printed Board Connectors Section 102: Detail Specification for Two-Part Single-Pole Connectors, for Multiple Useson Plug-In Unit
1997 CENELEC 0
5435 EN 60352-1 Solderless Connections Part 1: Wrapped Connections - General Requirements, Test Methods and Practical Guidance 1997 CENELEC 05436 EN 60618 Inductive Voltage Dividers - Incorporates Amendment A2: 1997 1997 CENELEC 05437 EN 61021-2 Laminated Core Packages for Transformers and Inductors for Use in Telecommunication and Electronic Equipment Part 2:
Electrical Characteristics for Cores Using YEE 2 Laminations1997 CENELEC 0
5438 EN 61248-4 Transformers and Inductors for Use in Electronic and Telecommunication Equipment Part 4: Sectional Specification forPower Transformers for Switched Mode Power Supplies (SMPS) on the Basis of the Capability Approval Procedure
1997 CENELEC 0
5439 EN 61754-2 Fibre Optic Connector Interfaces Part 2: Type BFOC/2,5 Connector Family 1997 CENELEC 05440 EN 61843 Measuring Method for the Level of Intermodulation Products Generated in a Gyromagnetic Device 1997 CENELEC 05441 EN 61300-2-36 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 2-36: Tests -
Flammability (Fire Hazard)1997 CENELEC 0
5442 EN 186260 Sectional Specification: Connector Sets for Optical Fibres and Cables Type SC 1997 CENELEC 05443 EN 61196-3-2 Radio Frequency Cables Part 3-2: Coaxial Cables for Digital Communication in Horizontal Floor Wiring Detail
Specification for Coaxial Cables with Solid Dielectric for Local Area Networks of 185 m Reach and up to 10 Mb/s1997 CENELEC 0
5444 EN 61068-2 Specification for Polyester Fibre Woven Tapes Part 2: Methods of Test 1997 CENELEC 05445 EN 186290 Sectional Specification: Connector Sets for Optical Fibres and Cables Type MPO 1997 CENELEC 05446 EN 61248-1 Transformers and Inductors for Use in Electronic and Telecommunication Equipment Part 1: Generic Specification 1997 CENELEC 05447 EN 61188-1-1 Printed Boards and Printed Board Assemblies - Design and Use Part 1-1: Generic Reqirements - Flatness Considerations
for Electronic Assemblies1997 CENELEC 0
5448 EN 61068-1 Specification for Polyester Fibre Woven Tapes Part 1: Definitions, Designation and General Requirements 1997 CENELEC 05449 EN 61591 Household range hoods and other cooking fume extractors - Methods for measuring performance - Incorporates
Amendment A12: 20151997 CENELEC 0
5450 EN 181104 Blank Detail Specification: Fibre Optic Branching Devices Type: Wavelength Selective Transmissive Star forTelecommunication Application
1997 CENELEC 0
5451 EN 61621 Dry, Solid Insulating Materials - Resistance Test to High-Voltage, Low-Current Arc Discharges 1997 CENELEC 05452 EN 61076-3-
101Connectors with Assessed Quality, for Use in d.c. Low-Frequency Analogue and in Digital High-Speed Data ApplicationsPart 3: Rectangular Connectors Section 101: Detail Specification for a Range of Shielded Connectors with TrapezoidalShaped Shells and Non
1997 CENELEC 0
5453 EN 61248-6 Transformers and Inductors for Use in Electronic and Telecommunication Equipment Part 6: Sectional Specification forInductors on the Basis of the Capability Approval Procedure
1997 CENELEC 0
5454 EN 60654-4 Operating Conditions for Industrial-Process Measurement and Control Equipment Part 4: Corrosive and Erosive Influences 1997 CENELEC 05455 EN 60317-46 Specifications for Particular Types of Winding Wires Part 46: Aromatic Polyimide Enamelled Round Copper Wire, Class
2401997 CENELEC 0
5456 EN 60444-2 Measurement of Quartz Crystal Unit Parameters by Zero Phase Technique in a Pi-Network Part 2: Phase Offset Method forMeasurement of Motional Capacitance of Quartz Crystal Units
1997 CENELEC 0
5457 EN 60244-14 Methods of Measurement for Radio Transmitters Part 14: External Intermodulation Products Caused by Two or MoreTransmitters Using the Same or Adjacent Antennas
1997 CENELEC 0
5458 EN 61248-7 Transformers and Inductors for Use in Electronic and Telecommunication Equipment Part 7: Sectional Specification forHigh-Frequency Inductors and Intermediate Frequency Transformers on the Basis of the Capability Approval Procedure
1997 CENELEC 0
5459 EN 61660-1 Short-Circuit Currents in D.C. Auxiliary Installations in Power Plants and Substations Part 1: Calculation of Short-CircuitCurrents
1997 CENELEC 0
5460 EN 61300-3-13 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 3-13:Examinations and Measurements Control Stability of a Fibre Optic Switch
1997 CENELEC 0
5461 EN 60107-7 Methods of Measurement on Receivers for Television; Part 7: HDTV Displays 1997 CENELEC 05462 ENV 50230 Aeronautical Ground Lighting Electrical Installation Control and Monitoring Systems: General Requirements 1997 CENELEC 05463 EN 61603-1 Transmission of Audio and/or Video and Related Signals Using Infra-Red Radiation Part 1: General 1997 CENELEC 05464 EN 60477 Laboratory d.c. Resistors - Incorporates Amendment A1: 1997 1997 CENELEC 05465 EN 61300-3-9 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 3-9:
Examinations and Measurements - Far-End Crosstalk1997 CENELEC 0
5466 EN 165000-5 Film and Hybrid Integrated Circuits Part 5: Procedure for Qualification Approval 1997 CENELEC 05467 EN 60654-3 Operating Conditions for Industrial-Process Measurement and Control Equipment Part 3: Mechanical Influences 1997 CENELEC 05468 EN 60721-3-5 Classification of Environmental Conditions Part 3: Classification of Groups of Environmental Parameters and Their
Severities Section 5: Ground Vehicle Installations1997 CENELEC 0
5469 EN 61021-1 Laminated Core Packages for Transformers and Inductors Used in Telecommunication and Electronic Equipment Part 1:Dimensions
1997 CENELEC 0
5470 EN 61248-2 Transformers and Inductors for Use in Electronic and Telecommunication Equipment Part 2: Sectional Specification forSignal Transformers on the Basis of the Capability Approval Procedure
1997 CENELEC 0
5471 EN 61603-2 Transmission of audio and/or video and related signals using infra-red radiation Part 2: Transmission systems for audiowide band and related signals - Incorporates Amendment A1: 2004; Remains Current
1997 CENELEC 0
5472 EN 61242 Electrical accessories - Cable reels for household and similar purposes - Incorporates Amendment A3: 2018 1997 CENELEC 05473 EN 61300-2-13 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 2-13: Tests -
Acceleration1997 CENELEC 0
5474 EN 45510-1 Guide for Procurement of Power Station Equipment - Part 1: Common Clauses 1997 CENELEC 05475 EN 61196-3-3 Radio Frequency Cables Part 3-3: Coaxial Cables for Digital Communication in Horizontal Floor Wiring Detail
Specification for Coaxial Cables with Foamed Dielectric for Local Area Networks of 185 m Reach and up to 10 Mb/s1997 CENELEC 0
5476 EN 61754-8 Fibre Optic Connector Interfaces Part 8: Type CF08 Connector Family 1997 CENELEC 05477 EN 160200-2 Sectional Specification: Microwave Modular Electronic Units of Assessed Quality Part 2: Index of Test Methods 1997 CENELEC 05478 ENV 50232 Aeronautical Ground Lighting Electrical Installation Isolating Transformer: Equipment Specifications and Tests 1997 CENELEC 05479 EN 60317-43 Specifications for particular types of winding wires Part 43: Aromatic polyimide tape wrapped round copper wire, class
240 - Incorporates Amendment A1: 20101997 CENELEC 0
5480 EN 61580-3 Methods of Measurement for Waveguides Part 3: Variation of Group Delay 1997 CENELEC 05481 EN 61660-2 Short-Circuit Currents in D.C. Auxiliary Installations in Power Plants and Substations Part 2: Calculation of Effects 1997 CENELEC 05482 EN 61866 Audiovisual Systems Interactive Text Transmission System (ITTS) 1997 CENELEC 05483 EN 61146-2 Video Cameras (PAL/SECAM/NTSC) - Methods of Measurement Part 2: Two- and Three-Sensor Professional Cameras 1997 CENELEC 05484 EN 60512-19-3 Electromechanical Components for Electronic Equipment Basic Testing Procedures and Measuring Methods Part 19:
Chemical Resistance Tests Section 3: Test 19c - Fluid Resistance1997 CENELEC 0
5485 EN 60864-2 Standardization of Interconnections between Broadcasting Transmitters or Transmitter Systems and SupervisoryEquipment Part 2: Interface Standards for Systems Using Data Bus Type Interconnections
1997 CENELEC 0
5486 EN 50117-5 Coaxial Cables Used in Cabled Distribution Networks; Part 5: Sectional Specification for Indoor Drop Cables for Use inNetworks Operating at Frequencies between 5 MHz and 2150 MHz
1997 CENELEC 0
5487 EN 60406 Cassettes for Medical X-Ray Diagnosis Radiographic Cassettes and Mammographic Cassettes 1997 CENELEC 0
5488 EN 61269-1 Fibre Optic Terminus Sets; Part 1: Generic Specification 1997 CENELEC 05489 EN 61595-1 Multichannel Digital Audio Tape Recorder (DATR), Reel-to-Reel System, for Professional Use Part 1: Format A 1997 CENELEC 05490 EN 61146-3 Video Cameras (PAL/SECAM/NTSC) - Methods of Measurement Part 3: Non-Broadcast Camera-Recorders 1997 CENELEC 05491 EN 60512-1-3 Electromechanical Components for Electronic Equipment Basic Testing Procedures and Measuring Methods Part 1:
General Examination Section 3: Test 1c - Electrical Engagement Length1997 CENELEC 0
5492 EN 60835-2-11 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 2: Measurements onTerrestrial Radio-Relay Systems Section 11: Cross-Polarization Interference Canceller
1997 CENELEC 0
5493 EN 60107-2 Methods of Measurement on Receivers for Television Broadcast Transmissions Part 2: Audio Channels - General Methodsand Methods for Monophonic Channels
1997 CENELEC 0
5494 EN 62326-4-1 Printed Boards; Part 4: Rigid Multilayer Printed Boards with Interlayer Connections Sectional Specification; Section 1:Capability Detail Specification Performance Levels A, B and C
1997 CENELEC 0
5495 EN 175500 Sectional Specification: Cable Outlet Accessories for Connectors, Including Qualification Approval and CapabilityApproval
1997 CENELEC 0
5496 EN 61300-2-29 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 2-29: Tests -Low Air Pressure
1997 CENELEC 0
5497 EN 61580-6 Methods of measurement for waveguides - Part 6: Return loss on waveguide and waveguide assemblies 1997 CENELEC 05498 EN 61725 Analytical Expression for Daily Solar Profiles 1997 CENELEC 05499 EN 61300-2-8 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 2-8: Tests -
Bump1997 CENELEC 0
5500 EN 61300-2-27 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 2-27: Tests -Dust - Laminar Flow
1997 CENELEC 0
5501 EN 61300-2-4 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 2-4: Tests -Fibre/Cable Retention
1997 CENELEC 0
5502 EN 60317-44 Specifications for particular types of winding wires Part 44: Aromatic polyimide tape wrapped rectangular copper wire,class 240 - Incorporates Amendment A1: 2010
1997 CENELEC 0
5503 EN 61642 Industrial a.c. Networks Affected by Harmonics Application of Filters and Shunts Capacitors 1997 CENELEC 05504 EN 60654-2 Operating Conditions for Industrial-Process Measurement and Control Equipment Part 2: Power 1997 CENELEC 05505 EN 61628-1 Corrugated Pressboard and Presspaper for Electrical Purposes Part 1: Definitions, Designations and General Requirements 1997 CENELEC 05506 EN 61067-1 Specification for Glass and Glass Polyester Fibre Woven Tapes Part 1: Definitions, Classification and General
Requirements1997 CENELEC 0
5507 EN 61269-1-1 Fibre Optic Terminus Sets Part 1-1: Blank Detail Specification 1997 CENELEC 05508 EN 62326-4 Printed Boards; Part 4: Rigid Multilayer Printed Boards with Interlayer Connections Sectional Specifications 1997 CENELEC 05509 EN 60889 Hard-Drawn Aluminium Wire for Overhead Line Conductors 1997 CENELEC 05510 EN 61243-2 Live working Voltage detectors Part 2: Resistive type to be used for voltages of 1 kV to 36 kV a.c - Incorporates
Amendments A1: 2000 and A2: 20021997 CENELEC 0
5511 EN 60874-17 Connectors for Optical Fibres and Cables Part 17: Sectional Specification for Fibre Optic Connector Type F-05 (FrictionLock)
1997 CENELEC 0
5512 ENV 50235 Aeronautical Ground Lighting Electrical Installation Signs: Equipment Specifications and Tests 1997 CENELEC 05513 EN 60444-3 Measurement of Quartz Crystal Unit Parameters by Zero Phase Technique in a Pi-Network Part 3: Basic Method for the
Measurement of Two-Terminal Parameters of Quartz Crystal Units up to 200 MHz by Phase Technique in a Pi-Networkwith Compensation of the Par
1997 CENELEC 0
5514 EN 60444-5 Measurement of Quartz Crystal Unit Parameters Part 5: Methods for the Determination of Equivalent Electrical ParametersUsing Automatic Network Analyzer Techniques and Error Correction
1997 CENELEC 0
5515 EN 50221 Common Interface Specification for Conditional Access and Other Digital Video Broadcasting Decoder Applications 1997 CENELEC 05516 EN 61300-2-30 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 2-30: Tests -
Solar Radiation1997 CENELEC 0
5517 EN 60317-42 Specifications for particular types of winding wires - Part 42: Polyester-amide-imide enamelled round copper wire, class200 - Incorporates Amendment A1: 2010
1997 CENELEC 0
5518 EN 60534-6-1 Industrial-Process Control Valves Part 6: Mounting Details for Attachment of Positioners to Control Valves Section 1:Positioner Mounting on Linear Actuators
1997 CENELEC 0
5519 EN 50178 Electronic Equipment for Use in Power Installations - Remains Current 1997 CENELEC 05520 ENV 50234 Aeronautical Ground Lighting Electrical Installation Flashing Lights: Equipment Specifications and Tests 1997 CENELEC 05521 EN 60107-8 Recommended Methods of Measurement on Receivers for Television Broadcast Transmissions Part 8: Measurement on
D2-MAC/Packet Equipment1997 CENELEC 0
5522 EN 60645-2 Audiometers Part 2: Equipment for Speech Audiometry 1997 CENELEC 05523 EN 50117-6 Coaxial Cables Used in Cabled Distribution Networks; Part 6: Sectional Specification for Outdoor Drop Cables for Use in
Networks Operating at Frequencies between 5 MHz and 2150 MHz1997 CENELEC 0
5524 EN 61300-3-27 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 3-27:Examinations and Measurements - Measurement Method for the Hole Location of a Multiway Connector Plug
1997 CENELEC 0
5525 EN 186270 Sectional specification: Connector sets for optical fibres and cables Type LSH 1997 CENELEC 05526 EN 60352-6 Solderless Connections Part 6: Insulation Piercing Connections General Requirements, Test Methods and Practical
Guidance1997 CENELEC 0
5527 EN 60814 Insulating Liquids - Oil-Impregnated Paper and Pressboard Determination of Water by Automatic Coulometric KarlFischer Titration
1997 CENELEC 0
5528 EN 60169-21 Radio-Frequency Connectors Part 21: Two Types of Radio-Frequency Connectors with Inner Diameter of Outer Conductor9,5 mm (0,374 in) with Different Versions of Screw Coupling Characteristic Impendance 50 ohms (Types SC-A and SC-B)
1997 CENELEC 0
5529 EN 125000 Generic Specification: Cores Made of Ferrite Materials 1997 CENELEC 05530 EN 61169-1-1 Radio-Frequency Connectors Part 1-1: Single, Multi-Series, Dual-Language Blank Detail Specification 1997 CENELEC 05531 EN 61313-1 Fibre Optic Passive Components and Cable Assemblies Part 1: Capability Approval - Generic Specification 1997 CENELEC 05532 EN 160100 Sectional Specification: Capability Approval of Manufacturers of Printed Board Assemblies of Assessed Quality 1997 CENELEC 05533 EN 61248-5 Transformers and Inductors for Use in Electronic and Telecommunication Equipment Part 5: Sectional Specification for
Pulse Transformers on the Basis of the Capability Approval Procedure1997 CENELEC 0
5534 EN 61300-3-19 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 3-19:Examinations and Measurements - Polarization Dependence of Return Loss of a Single Mode Fibre Optic Component
1997 CENELEC 0
5535 EN 61248-3 Transformers and Inductors for Use in Electronic and Telecommunication Equipment Part 3: Sectional Specification forPower Transformers on the Basis of the Capability Approval Procedure
1997 CENELEC 0
5536 EN 61284 Overhead Lines - Requirements and Tests for Fittings 1997 CENELEC 05537 EN 50049-1 Domestic and Similar Electronic Equipment Interconnection Requirements: Peritelevision Connector - Incorporates
Amendment A1: 19981997 CENELEC 0
5538 EN 61300-3-8 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 3-8:Examinations and Measurements - Ambient Light Susceptibility
1997 CENELEC 0
5539 EN 60107-1 Methods of Measurement on Receivers for Television Broadcast Transmissions; Part 1: General Considerations;Measurements at Radio and Video Frequencies
1997 CENELEC 0
5540 EN 60704-2-8 Household and Similar Electrical Appliances Test Code for the Determination of Airborne Acoustical Noise Part 2:Particular Requirements for Electric Shavers
1997 CENELEC 0
5541 EN 61754-6 Fibre Optic Connector Interfaces - Part 6: Type MU Connector Family 1997 CENELEC 05542 EN 60477-2 Laboratory Resistors - Part 2: Laboratory a.c. Resistors - Incorporates Amendment A1: 1997 1997 CENELEC 05543 EN 61041-4 Non-Broadcast Video Tape Recorders Methods of Measurement Part 4: Calibration Tape (NTSC/PAL/SECAM) 1997 CENELEC 05544 EN 61300-2-39 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 2-39: Tests -
Susceptibility to External Magnetic Fields1997 CENELEC 0
5545 EN 61300-3-11 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 3-11:Examinations and Measurements Engagement and Separation Forces
1997 CENELEC 0
5546 EN 60512-1-4 Electromechanical Components for Electronic Equipment - Basic Testing Procedures and Measuring Methods - Part 1:General - Section 4: Test 1d: Contact Protection Effectiveness (Scoop-Proof)
1997 CENELEC 0
5547 EN 61300-2-32 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 2-32: Tests -Water Vapour Permeation
1997 CENELEC 0
5548 EN 60444-4 Measurement of Quartz Crystal Unit Parameters by Zero Phase Technique in a Pi-Network Part 4: Method for theMeasurement of the Load Resonance Frequency fL, Load Resonance Resistance RL and the Calculation of Other DerivedValues of Quartz Crystal Units,
1997 CENELEC 0
5549 EN 60672-3 Ceramic and Glass-Insulating Materials Part 3: Specifications for Individual Materials 1997 CENELEC 05550 EN 60437 Radio Interference Test on High-Voltage Insulators 1997 CENELEC 05551 EN 60444-1 Measurement of Quartz Crystal Unit Parameters by Zero Phase Technique in a Pi-Network - Part 1: Basic Method for the
Measurement of Resonance Frequency and Resonance Resistance of Quartz Crystal Units by Zero Phase Technique in a Pi-Network - Incorporates
1997 CENELEC 0
5552 EN 60404-4 Magnetic materials Part 4: Methods of measurement of d.c. magnetic properties of magnetically soft materials -Incorporates Amendment A2: 2008
1997 CENELEC 0
5553 EN 181103 Blank Detail Specification: Fibre Optic Branching Devices Type: Non Wavelength Selective Transmissive Star forTelecommunication Application
1997 CENELEC 0
5554 EN 61247 PM-Cores Made of Magnetic Oxides and Associated Parts - Dimensions 1997 CENELEC 05555 EN 60730-2-14 Automatic electrical controls for household and similar use - Part 2-14: Particular requirements for electric actuators -
Incorporates Amendments A11: 2005 and A2: 20081997 CENELEC 0
5556 EN 50227 Control Circuit Devices and Switching Elements Proximity Sensors, d.c. Interface for Proximity Sensors and SwitchingAmplifiers (NAMUR)
1997 CENELEC 0
5557 ENV 50231 Aeronautical Ground Lighting Electrical Installation Constant Current Regulator: Equipment Specifications and Tests 1997 CENELEC 05558 EN 60874-19 Connectors for Optical Fibres and Cables Part 19: Sectional Specification for Fibre Optic Connector - Type SC-D(uplex) 1997 CENELEC 05559 EN 61619 Insulating Liquids - Contamination by Polychlorinated Biphenyls (PCBs) Method of Determination by Capillary Column
Gas Chromatography1997 CENELEC 0
5560 EN 50117-3 Coaxial cables used in cabled distribution networks Part 3: Sectional specification for outdoor drop cables 1996 CENELEC 05561 EN 60852-4 Outline Dimensions of Transformers and Inductors for Use in Telecommunication and Electronic Equipment Part 4:
Transformers and Inductors Using YUI-2 Laminations1996 CENELEC 0
5562 EN 120000 Generic Specification: Semiconductor Optoelectronic and Liquid Crystal Devices - Remains Current 1996 CENELEC 05563 EN 60305 Insulators for Overhead Lines with a Nominal Voltage Above 1 kV Ceramic or Glass Insulator Units for a.c. Systems
Characteristics of Insulator Units of the Cap and Pin Type1996 CENELEC 0
5564 EN 60870-2-1 Telecontrol Equipment and Systems Part 2: Operating Conditions Section 1: Power Supply and ElectromagneticCompatibility
1996 CENELEC 0
5565 EN 165000-4 Film and Hybrid Integrated Circuits Part 4: Customer Information, Product Assessment Level Schedules and Blank DetailSpecification
1996 CENELEC 0
5566 EN 140104 Blank Detail Specification: Fixed Low Power Non-Wirewound Resistors (Assessment Levels SB and SC) 1996 CENELEC 05567 EN 50212 Connectors for Thermoelectric Sensors 1996 CENELEC 05568 EN 61733-1 Measuring Relays and Protection Equipment Protection Communication Interfacing Part 1: General 1996 CENELEC 05569 EN 61319-1 Interconnections of satellite receiving equipment - Part 1: Europe - Incorporates Amendment A11: 1999 1996 CENELEC 05570 EN 60983 Miniature Lamps - Incorporates Amendment A1: 2005 1996 CENELEC 05571 HD 607 S1 Busbar Bushings up to 1 kV and from 1,25 kA to 5 kA, for Liquid Filled Transformers 1996 CENELEC 05572 EN 140203 Blank Detail Specification: Fixed Power Resistors (Assessment Level H) 1996 CENELEC 05573 EN 116000-3 Generic Specification: Electromechanical All- or-Nothing Relays Part 3: Test and Measurement Procedures 1996 CENELEC 05574 EN 60276 Definitions and Nomenclature for Carbon Brushes, Brush-Holders, Commutators and Slip-Rings 1996 CENELEC 05575 EN 61629-1 Aramid Pressboard for Electrical Purposes Part 1: Definitions, Designations and General Requirements 1996 CENELEC 0
5576 EN 61000-2-9 Electromagnetic Compatibility (EMC) Part 2: Environment Section 9: Description of HEMP Environment - RadiatedDisturbance Basic EMC Publication
1996 CENELEC 0
5577 EN 61629-2 Aramid Pressboard for Electrical Purposes Part 2: Methods of Test 1996 CENELEC 05578 EN 60870-2-2 Telecontrol Equipment and Systems - Part 2: Operating Conditions - Section 2: Environmental Conditions (Climate,
Mechanical and Other Non-Electrical Influences)1996 CENELEC 0
5579 EN 60835-3-14 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 3: Measurements onSatellite Earth Stations Section 14: Earth Stations for Satellite News Gathering (SNG)
1996 CENELEC 0
5580 EN 50090-2-2 Home and building electronic systems (HBES) - Part 2-2: System overview - General technical requirements - IncorporatesAmendments A1: 2002 and A2: 2007; Remains Current
1996 CENELEC 0
5581 EN 61249-8-7 Materials for Interconnection Structures Part 8: Sectional Specification Set for Non-Conductive Films and Coatings Section7: Marking Legend Inks
1996 CENELEC 0
5582 EN 60901 Single-capped fluorescent lamps - Performance specifications - Incorporates Amendment A6: 2017 1996 CENELEC 05583 EN 60835-3-2 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 3: Measurements on
Satellite Earth Stations Section 2: Antenna1996 CENELEC 0
5584 EN 60068-4 Environmental Testing Part 4: Information for Specification Writers Test Summaries 1996 CENELEC 05585 EN 60383-1 Insulators for Overhead Lines with a Nominal Voltage Above 1 kV Part 1: Ceramic or Glass Insulator Units for a.c.
Systems Definitions, Test Methods and Acceptance Criteria - Incorporates Amendment A11: 19991996 CENELEC 0
5586 EN 50187 Gas-Filled Compartments for a.c. Switchgear and Controlgear for Rated Voltages Above 1 kV and up to and Including 52kV
1996 CENELEC 0
5587 EN 60917-2-2 Modular Order for the Development of Mechanical Structures for Electronic Equipment Practices Part 2: SectionalSpecification - Interface Co-Ordination Dimensions for the 25 mm Equipment Practice Section 2: Detail Specification -Dimensions for Subracks,
1996 CENELEC 0
5588 EN 60601-2-9 Medical Electrical Equipment; Part 2: Particular Requirements for the Safety of Patient Contact Dosemeters Used inRadiotherapy with Electrically Connected Radiation Detectors - Incorporating Corrigendum December 1996
1996 CENELEC 0
5589 EN 50117-4 Coaxial Cables Used in Cabled Distribution Networks Part 4: Sectional Specification for Distribution and Trunk Cables 1996 CENELEC 05590 EN 61114-2 Methods of Measurement on Receiving Antennas for Satellite Broadcast Transmission in the 11/12 GHz Band Part 2:
Mechanical and Environmental Tests on Individual and Collective Receiving Antennas1996 CENELEC 0
5591 EN 61334-4-41 Distribution Automation Using Distribution Line Carrier Systems Part 4: Data Communication Protocols Section 41:Application Protocols Distribution Line Message Specification
1996 CENELEC 0
5592 EN 60512-12-6 Electromechanical Components for Electronic Equipment - Basic Testing Procedures and Measuring Methods - Part 12:Soldering Tests Section 6: Test 12f: Sealing Against Flux and Cleaning Solvents in Machine Soldering
1996 CENELEC 0
5593 EN 125500 Sectional Specification: Magnetic Oxide Ring Cores for Interference Suppression and Low Level Signal TransformerApplications
1996 CENELEC 0
5594 EN 61797-1 Transformers and Inductors for Use in Telecommunication and Electrical Equipment - Main Dimensions of Coil Formers;Part 1: Coil Formers for Laminated Cores
1996 CENELEC 0
5595 EN 61270-1 Capacitors for Microwave Ovens Part 1: General 1996 CENELEC 05596 EN 61329 Sound System Equipment Methods of Measuring and Specifying the Performance of Sounders (Electroacoustic
Transducers for Tone Production)1996 CENELEC 0
5597 EN 50098-2 Customer Premises Cabling for Information Technology Part 2. 2048 kbit/s ISDN Primary Access and Leased LineNetwork Interface
1996 CENELEC 0
5598 EN 175200 Sectional Specification: Circular Connectors 1996 CENELEC 05599 EN 60835-3-6 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 3: Measurements on
Satellite Earth Stations Section 6: High Power Amplifiers1996 CENELEC 0
5600 EN 61334-4-42 Distribution Automation Using Distribution Line Carrier Systems Part 4: Data Communication Protocols Section 42:Application Protocols - Application Layer
1996 CENELEC 0
5601 EN 50225 Code of Practice for the Safe Use of Fully Enclosed Oil-Filled Electrical Equipment Which May Be Contaminated withPCBs
1996 CENELEC 0
5602 EN 61334-4-1 Distribution Automation Using Distribution Line Carrier Systems Part 4: Data Communication Protocols Section 1:Reference Model of the Communication System
1996 CENELEC 0
5603 EN 50203 Automatic Channel Installation (ACI) - Incorporates Amendment A1: 1997 1996 CENELEC 05604 EN 175300 Sectional Specification: Rectangular Connectors for Frequencies Below 3 MHz 1996 CENELEC 05605 EN 60931-1 Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV Part 1:
General - Performance, testing and rating - Safety requirements - Guide for installation and operation - IncorporatesAmendment A1
1996 CENELEC 0
5606 EN 60931-3 Shunt Power Capacitors of the Non-Self-Healing Type for a.c. Systems Having a Rated Voltage up to and Including 1 kVPart 3: Internal Fuses
1996 CENELEC 0
5607 EN 61223-3-3 Evaluation and Routine Testing in Medical Imaging Departments; Part 3-3: Acceptance Tests - Imaging Performance of X-Ray Equipment for Digital Subtraction Angiography (DSA)
1996 CENELEC 0
5608 EN 60068-2-67 Environmental Testing - Part 2: Tests Test Cy: Damp Heat, Steady State, Accelerated Test Primarily Intended forComponents
1996 CENELEC 0
5609 EN 165000-3 Film and Hybrid Integrated Circuits Part 3: Self-Audit Checklist and Report for Film and Hybrid Integrated CircuitManufacturers
1996 CENELEC 0
5610 EN 61146-1 Video Cameras (PAL/SECAM/NTSC) Methods of Measurement Part 1: Non-Broadcast Single-Sensor Cameras 1996 CENELEC 05611 EN 61429 Marking of Secondary Cells and Batteries with the International Recycling Symbol ISO 7000-1135 and Indications
Regarding Directives 93/86/EEC and 91/157/EEC - Incorporates Amendment A11: 19981996 CENELEC 0
5612 EN 60094-3 Magnetic Tape Sound Recording and Reproducing Systems - Part 3: Methods of Measuring the Characteristics ofRecording and Reproducing Equipment for Sound on Magnetic Tape - Incorporates Amendment A3: 1996
1996 CENELEC 0
5613 EN 61580-9 Methods of Measurement for Waveguides Part 9: Reflection Coefficient at Rectangular Waveguide Interfaces 1996 CENELEC 05614 EN 61334-4-32 Distribution Automation Using Distribution Line Carrier Systems Part 4: Data Communication Protocols Section 32: Data
Link Layer - Logical Link Control (LLC)1996 CENELEC 0
5615 EN 61773 Overhead Lines Testing of Foundations for Structures 1996 CENELEC 05616 EN 61076-4-
001Connectors with Assessed Quality, for Use in d.c., Low-Frequency Analogue and in Digital High-Speed Data ApplicationsPart 4: Printed Board Connectors Section 001: Blank Detail Specification
1996 CENELEC 0
5617 HD 627 S1 Multicore and Multipair Cable for Installation Above and Below Ground 1996 CENELEC 05618 EN 60870-5-
102Telecontrol Equipment and Systems Part 5: Transmission Protocols Section 102: Companion Standard for the Transmissionof Integrated Totals in Electric Power Systems
1996 CENELEC 0
5619 EN 61249-5-4 Materials for Interconnection Structures Part 5: Sectional Specification Set for Conductive Foils and Films with andwithout Coatings Section 4: Conductive Inks
1996 CENELEC 0
5620 EN 60931-2 Shunt Power Capacitors of the Non-Self-Healing Type for a.c. Systems Having a Rated Voltage up to and Including 1 kVPart 2: Ageing Test and Destruction Test
1996 CENELEC 0
5621 EN 60317-26 Specifications for particular types of winding wires Part 26. Polyamide-imide enamelled round copper wire, class 200 -Incorporates Amendment A2: 2010
1996 CENELEC 0
5622 EN 61434 Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes Guide to the Designation of Current inAlkaline Secondary Cell and Battery Standards
1996 CENELEC 0
5623 EN 61580-1 Methods of Measurement for Waveguides Part 1: Decoupling and Rotation of the Plane of Polarization 1996 CENELEC 05624 EN 140102 Blank Detail Specification: Fixed Low Power Non-Wirewound Resistors (Assessment Level M) 1996 CENELEC 05625 EN 60068-2-70 Environmental Testing Part 2: Tests Test Xb: Abrasion of Markings and Letterings Caused by Rubbing of Fingers and
Hands1996 CENELEC 0
5626 EN 61063 Acoustics Measurement of Airborne Noise Emitted by Steam Turbines and Driven Machinery 1996 CENELEC 05627 EN 60512-16-
20Electromechanical Components for Electronic Equipment - Basic Testing Procedures and Measuring Methods - Part 16:Mechanical Tests on Contacts and Terminations Section 20: Test 16t: Mechanical Strength (Wired Termination ofSolderless Connections)
1996 CENELEC 0
5628 EN 140103 Blank Detail Specification: Fixed Low Power Non-Wirewound Resistors (Assessment Level P) 1996 CENELEC 0
5629 EN 60838-2-1 Miscellaneous lampholders - Part 2: Particular requirements - Section 1: Lampholders S14 - Incorporates Amendments A1:1998 and A2: 2004; Incorporating Corrigendum May 2013
1996 CENELEC 0
5630 EN 60317-29 Specifications for particular types of winding wires Part 29: Polyester or polyesterimide overcoated with polyamide-imideenamelled rectangular copper wire, class 200 - Incorporates Amendment A2: 2010
1996 CENELEC 0
5631 EN 140201 Blank Detail Specification: Fixed Power Resistors (Assessment Level S) 1996 CENELEC 05632 EN 61076-4 Connectors with Assessed Quality, for Use in d.c., Low Frequency Analogue and in Digital High-Speed Data Applications
- Part 4: Sectional Specification Printed Board Connectors1996 CENELEC 0
5633 EN 61041-2 Non-Broadcast Video Tape Recorders Methods of Measurement Part 2: Video Characteristics Chrominance SECAM 1996 CENELEC 05634 EN 60851-1 Winding wires - Test methods - Part 1: General - Incorporates Amendment A2: 2009 1996 CENELEC 05635 EN 50147-1 Anechoic Chambers Part 1: Shield Attenuation Measurement 1996 CENELEC 05636 EN 60118-12 Hearing Aids Part 12: Dimensions of Electrical Connector Systems 1996 CENELEC 05637 EN 132102 Blank Detail Specification: Fixed Multilayer Ceramic Surface Mounting Capacitors Assessment Level DZ 1996 CENELEC 05638 EN 60598-2-23 Luminaires - Part 2-23: Particular Requirements - Extra Low-Voltage Lighting Systems for Filament Lamps - Incorporates
Amendment A1: 20001996 CENELEC 0
5639 EN 165000-1 Film and Hybrid Integrated Circuits Part 1: Generic Specification Capability Approval Procedure 1996 CENELEC 05640 EN 61580-7 Methods of Measurement for Waveguides Part 7: Graphical Method for the Determination of Waveguide Performance 1996 CENELEC 05641 EN 140200 Sectional Specification: Fixed Power Resistors - Incorporates Amendment A1: 2001 1996 CENELEC 05642 EN 60870-6-
501Telecontrol equipment and systems Part 6: Telecontrol protocols compatible with ISO standards and ITU-Trecommendations Section 501: TASE.1 Service definitions
1996 CENELEC 0
5643 EN 61580-8 Methods of Measurement for Waveguides Part 8: Waveguide Power Holding Capability 1996 CENELEC 05644 EN 61000-5-5 Electromagnetic Compatibility (EMC) Part 5: Installation and Mitigation Guidelines Section 5: Specification of Protective
Devices for HEMP Conducted Disturbance Basic EMC Publication1996 CENELEC 0
5645 EN 50195 Code of Practice for the Safe Use of Fully Enclosed Askarel-Filled Electrical Equipment 1996 CENELEC 05646 EN 140202 Blank Detail Specification: Fixed Power Resistors (Assessment Level M) 1996 CENELEC 05647 EN 61580-2 Methods of Measurement for Waveguides Part 2: Level of Intermodulation Products 1996 CENELEC 05648 EN 165000-2 Film and Hybrid Integrated Circuits Part 2: Internal Visual Inspection and Special Tests 1996 CENELEC 05649 EN 61334-3-21 Distribution Automation Using Distribution Line Carrier Systems Part 3: Mains Signalling Requirements Section 2.1: MV
Phase-To-Phase Isolated Capacitive Coupling Device1996 CENELEC 0
5650 EN 60835-3-13 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 3: Measurements onSatellite Earth Stations Section 13: VSAT Systems
1996 CENELEC 0
5651 EN 61610 Prints and Transparencies Produced from Electronic Sources Assessment of Image Quality 1996 CENELEC 05652 EN 61249-5-1 Materials for Interconnection Structures Part 5. Sectional Specification Set for Conductive Foils and Films with and
without Coatings Section 1. Copper Foils (for the Manufacture of Copper- Clad Base Materials)1996 CENELEC 0
5653 EN 60870-6-502
Telecontrol Equipment and Systems Part 6: Telecontrol Protocols Compatible with ISO Standards and ITU-TRecommendations Section 502: TASE.1 Protocol Definitions
1996 CENELEC 0
5654 EN 60068-2-68 Environmental Testing Part 2: Tests Test L: Dust and Sand 1996 CENELEC 05655 EN 137000 Generic Specification Fixed Aluminium Electrolytic a.c. Capacitors with Non- Solid Electrolyte for Use with Motors 1995 CENELEC 05656 EN 60835-3-4 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 3: Measurements on
Satellite Earth Stations Section 4: Low Noise Amplifier1995 CENELEC 0
5657 EN 61028 Electrical Measuring Instruments - X-Y Recorders 1995 CENELEC 05658 EN 60156 Insulating Liquids Determination of the Breakdown Voltage at Power Frequency Test Method 1995 CENELEC 05659 EN 60371-3-4 Specification for Insulating Materials Based on Mica Part 3: Specifications for Individual Materials Sheet 4: Polyester
Film-Backed Mica Paper with a B-Stage Epoxy Resin Binder - Incorporates Amendment A1: 20061995 CENELEC 0
5660 HD 384.5.52 S1 Electrical Installations of Buildings Part 5: Selection and Erection of Electrical Equipment Chapter 52: Wiring Systems 1995 CENELEC 05661 EN 60675 Household Electric Direct-Acting Room Heaters Methods for Measuring Performance - Incorporates Amendment A1: 1998 1995 CENELEC 0
5662 EN 60064 Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements - IncorporatesAmendments A11: 2007 and A5: 2009
1995 CENELEC 0
5663 EN 60634 Heat Test Source (H.T.S.) Lamps for Carrying out Heating Tests on Luminaires 1995 CENELEC 05664 EN 60835-3-11 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 3: Measurements on
Satellite Earth Stations Section 11. Service Channel Equipment for SCPC-PSK Transmission1995 CENELEC 0
5665 EN 50109-2-2 Hand crimping tools Tools for the crimp termination of electric cables and wires for low frequency and radio frequencyapplications Part 2-2: Particular requirements for radio frequency connectors and concentric contacts - Open throat toolswith removable
1995 CENELEC 0
5666 EN 61235 Live working Insulating hollow tubes for electrical purposes 1995 CENELEC 05667 EN 61232 Aluminium-Clad Steel Wires for Electrical Purposes - Incorporates Amendment A11: 2000 1995 CENELEC 05668 EN 61182-7 FAULTY STANDARD Printed Boards Electronic Data Description and Transfer Part 7: Bare Board Electric Test
Information in Digital Form1995 CENELEC 0
5669 EN 61266 Ultrasonics Hand-Held Probe Doppler Foetal Heartbeat Detectors Performance Requirements and Methods ofMeasurement and Reporting
1995 CENELEC 0
5670 HD 543.2.S1 Performance and Testing of Teleprotection Equipment of Power Systems Part 2: Analogue Comparison Systems 1995 CENELEC 05671 EN 137100 Sectional Specification: Fixed Aluminium Electrolytic a.c. Capacitors with Non- Solid Electrolyte for Motor Starter
Applications Qualification Approval1995 CENELEC 0
5672 EN 60155 Glow-Starters for Fluorescent Lamps - Incorporates Amendments A1: 1995 and A2: 2007 1995 CENELEC 05673 EN 61067-3-1 Glass and Glass Polyester Fibre Woven Tapes Part 3: Specifications for Individual Materials Sheet 1: Type 1, 2 and 3
Tapes1995 CENELEC 0
5674 EN 60870-6-2 Telecontrol Equipment and Systems Part 6: Telecontrol Protocols Compatible with ISO Standards and ITU-TRecommendations Section 2: Use of Basic Standards (OSI Layers 1-4)
1995 CENELEC 0
5675 HD 22.2S2/A11
Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 2: Test Methods 1995 CENELEC 0
5676 EN 61194 Characteristic Parameters of Stand-Alone Photovoltaic (PV) Systems 1995 CENELEC 05677 EN 60721-1 Classification of Environmental Conditions Part 1: Environmental Parameters and Their Severities (Incorporates A2) 1995 CENELEC 05678 EN 61204 Low-Voltage Power Supply Devices, d.c. Output - Performance Characteristics - Incorporates Amendment A1: 2001 1995 CENELEC 05679 EN 60870-6-
601Telecontrol Equipment and Systems Part 6: Telecontrol Protocols Compatible with ISO Standards ITU-TRecommendations Section 601 : Functional Profile for Providing the Connection-Oriented Transport Service in EndSystem Connected Via Permanent Access to a
1995 CENELEC 0
5680 EN 60835-2-4 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 2: Measurements onTerrestrial Radio-Relay Systems Section 4: Transmitter/Receiver Including Modulator/Demodulator - IncorporatesAmendment A1: 1997
1995 CENELEC 0
5681 EN 61206 Ultrasonics Continuous-Wave Doppler Systems - Test Procedures 1995 CENELEC 05682 EN 61237-2 Broadcast Video Tape Recorders Methods of Measurement Part 2: Electrical Measurements of Analogue Composite Video
Signals1995 CENELEC 0
5683 HD 22.9 S2 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 9: Single Core Non-Sheathed Cables forFixed Wiring Having Low Emission of Smoke and Corrosive Gases
1995 CENELEC 0
5684 EN 61120-5 Digital Audio Tape Recorder Reel-to-Reel System, Using 6,3 mm Magnetic Tape, for Professional Use Part 5: Reels 1995 CENELEC 05685 EN 60672-1 Ceramic and Glass Insulating Materials Part 1: Definitions and Classification 1995 CENELEC 05686 EN 60268-12 Sound System Equipment Part 12: Application of Connectors for Broadcast and Similar Use - Incorporates Amendment
A2: 19951995 CENELEC 0
5687 EN 60835-2-6 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 2: Measurements onTerrestrial Radio-Relay Systems Section 6: Protection Switching
1995 CENELEC 0
5688 EN 50148 Electronic Taximeters 1995 CENELEC 05689 EN 60721-3-3 Classification of Environmental Conditions; Part 3: Classification of Groups of Environmental Parameters and Their
Severities; Section 3: Stationary Use at Weatherprotected Locations - Incorporates Amendment A2: 19971995 CENELEC 0
5690 EN 60835-3-9 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 3: Measurements onSatellite Earth Stations Section 9: Terminal Equipment SCPC-PSK
1995 CENELEC 0
5691 EN 60953-2 Rules for Steam Turbine Thermal Acceptance Tests Part 2: Method B Wide Range of Accuracy for Various Types andSizes of Turbines
1995 CENELEC 0
5692 EN 50109-2-4 Hand Crimping Tools Tools for the Crimp Termination of Electric Cables and Wires for Low Frequency and RadioFrequency Applications Part 2-4: Particular Requirements for Centre Contacts of RF Connectors, Series SMZ
1995 CENELEC 0
5693 EN 60371-3-9 Insulating materials based on mica Part 3: Specifications for individual materials Sheet 9: Moulding micanite - IncorporatesAmendment A1: 2007
1995 CENELEC 0
5694 EN 61303 Medical Electrical Equipment; Radionuclide Calibrators; Particular Methods for Describing Performance 1995 CENELEC 05695 EN 61325 Insulators for Overhead Lines with a Nominal Voltage Above 1 000 V Ceramic or Glass Insulator Units for d.c. Systems
Definitions, Test Methods and Acceptance Criteria1995 CENELEC 0
5696 EN 60255-21-3 Electrical Relays Part 21: Vibration, Shock, Bump and Seismic Tests on Measuring Relays and Protection EquipmentSection 3: Seismic Tests
1995 CENELEC 0
5697 EN 190000 Generic Specification Monolithic Integrated Circuits 1995 CENELEC 05698 EN 50109-2-5 Hand Crimping Tools Tools for the Crimp Termination of Electric Cables and Wires for Low Frequency and Radio
Frequency Applications Part 2-5: Particular Requirements for the Termination of Twin-Ax Cable for Databus Applications1995 CENELEC 0
5699 EN 61252 Electroacoustics - Specifications for Personal Sound Exposure Meters - Incorporates Amendment A2: 2017 1995 CENELEC 05700 EN 61305-1 Household High-Fidelity Audio Equipment and Systems - Methods of Measuring and Specifying the Performance - Part 1:
General1995 CENELEC 0
5701 EN 60371-3-7 Insulating materials based on mica Part 3: Specifications for individual materials Sheet 7: Polyester film mica paper with anepoxy resin binder for single conductor taping - Incorporates Amendment A1: 2006
1995 CENELEC 0
5702 EN 61068-3-1 Polyester Fibre Woven Tapes - Part 3: Specifications for Individual Materials - Sheet 1: Tapes Woven on Conventional orShuttleless Looms
1995 CENELEC 0
5703 EN 100012 Basic Specification: X-Ray Inspection of Electronic Components 1995 CENELEC 05704 EN 60383-2 Insulators for Overhead Lines with a Nominal Voltage Above 1 000 V Part 2: Insulator Strings and Insulator Sets for a.c.
Systems Definitions, Test Methods and Acceptance Criteria1995 CENELEC 0
5705 EN 60953-1 Rules for Steam Turbine Thermal Acceptance Tests Part 1: Method A High Accuracy for Large Condensing SteamTurbines
1995 CENELEC 0
5706 EN 61041-1 Non-Broadcast Video Tape Recorders Methods of Measurement Part 1: General Video (NTSC/PAL) and Audio(Longitudinal) Characteristics
1995 CENELEC 0
5707 EN 60371-3-8 Insulating materials based on mica Part 3: Specifications for individual materials Sheet 8: Mica paper tapes for flame-resistant security cables - Incorporates Amendment A1: 2007
1995 CENELEC 0
5708 EN 50109-2-1 Hand Crimping Tools Tools for the Crimp Termination of Electric Cables and Wires for Low Frequency and RadioFrequency Applications Part 2-1: Particular Requirements for Radio Frequency Connectors and Concentric Contacts -Open Throat Tools with Fixed Die
1995 CENELEC 0
5709 EN 50109-2-3 Hand Crimping Tools Tools for the Crimp Termination of Electric Cables and Wires for Low Frequency and RadioFrequency Applications Part 2-3: Particular Requirements for Contacts of Electrical Connectors
1995 CENELEC 0
5710 HD 384.3 S2 Electrical Installations of Buildings Part 3: Assessment of General Characteristics 1995 CENELEC 05711 HD 21.9 S2 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 9: Single Core Non-Sheathed
Cable for Installation at Low Temperatures1995 CENELEC 0
5712 EN 60843-2 Helical-Scan Video Tape Cassette System Using 8 mm Magnetic Tape - 8 mm Video Part 2: PCM Multi-Track AudioSystem
1995 CENELEC 0
5713 HD 22.1 S2/A19
AMD 19 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 1: General Requirements 1995 CENELEC 0
5714 HD 22.3 S3 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 3: Heat Resistant Silicone Rubber InsulatedCables
1995 CENELEC 0
5715 EN 60835-2-5 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 2: Measurements onTerrestrial Radio-Relay Systems Section 5: Digital Signal Processing Sub-System
1995 CENELEC 0
5716 EN 60835-3-7 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 3: Measurements onSatellite Earth Stations Section 7: Figure-of-Merit of Receiving System
1995 CENELEC 0
5717 EN 60094-2 Magnetic Tape Sound Recording and Reproducing Systems Part 2: Calibration Tapes 1995 CENELEC 05718 EN 60835-3-12 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 3: Measurements on
Satellite Earth Stations Section 12: Overall System Performance1995 CENELEC 0
5719 EN 61309 Deep-Fat Fryers for Household Use Methods for Measuring the Performance 1995 CENELEC 05720 HD 348 S6 High-Voltage Alternating-Current Circuit-Breakers 1995 CENELEC 05721 EN 61327 Helical-Scan Digital Composite Video Cassette Recording System Using 12,65 mm (0,5 in) Magnetic Tape Format D-3 1995 CENELEC 05722 EN 61543 Residual current-operated protective devices (RCDs) for household and similar useElectromagnetic compatibility -
Incorporates Amendments A11: 2003, A12: 2005 and A2: 20061995 CENELEC 0
5723 EN 134101 Blank Detail Specification: Single turn disc trimmer capacitors (Qualification approval) 1995 CENELEC 05724 EN 50109-1 Hand Crimping Tools Tools for the Crimp Termination of Electric Cables and Wires for Low Frequency and Radio
Frequency Applications Part 1: General Requirements and Tests1995 CENELEC 0
5725 EN 60835-1-3 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 1: MeasurementsCommon to Terrestrial Radio-Relay Systems and Satellite Earth Stations Section 3: Transmission Characteristics -Incorporates Amendment A1: 1995
1995 CENELEC 0
5726 EN 61297 Industrial-Process Control Systems Classification of Adaptive Controllers for the Purpose of Evaluation 1995 CENELEC 05727 EN 60721-3-7 Classification of Environmental Conditions; Part 3: Classification of Groups of Environmental Parameters and Their
Severities; Section 7: Portable and Non-Stationary Use - Incorporates Amendment A1: 19971995 CENELEC 0
5728 EN 60721-3-4 Classification of Environmental Conditions; Part 3: Classification of Groups of Environmental Parameters and TheirSeverities; Section 4: Stationary Use at Non-Weatherprotected Locations - Incorporates Amendment A1: 1997
1995 CENELEC 0
5729 EN 134102 Blank Detail Specification: Multi turn concentric capacitors (Qualification approval) 1995 CENELEC 05730 EN 60315-7 Methods of Measurement on Radio Receivers for Various Classes of Emission Part 7: Methods of Measurement on Digital
Satellite Radio (DSR) Receivers1995 CENELEC 0
5731 EN 61249-7-1 Materials for Interconnection Structures Part 7: Sectional Specification Set for Restraining Core Materials Section 1:Copper/Invar/Copper
1995 CENELEC 0
5732 EN 60835-1-4 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 1: MeasurementsCommon to Terrestrial Radio-Relay Systems and Satellite Earth Stations Section 4: Transmission Performance -Incorporates Amendment A1: 1995
1995 CENELEC 0
5733 EN 61727 Photovoltaic (PV) Systems Characteristics of the Utility Interface 1995 CENELEC 05734 EN 61305-3 Household High-Fidelity Audio Equipment and Systems Methods of Measuring and Specifying the Performance Part 3:
Amplifiers1995 CENELEC 0
5735 EN 180101 Blank detail specification: Fixed fibre optic attenuators 1995 CENELEC 05736 EN 61302 Electrical Insulating Materials Method to Evaluate the Resistance to Tracking and Erosion Rotating Wheel Dip Test 1995 CENELEC 05737 EN 60255-21-2 Electrical Relays Part 21: Vibration, Shock, Bump and Seismic Tests on Measuring Relays and Protection Equipment
Section 2: Shock and Bump Tests1995 CENELEC 0
5738 EN 61119-5 Digital Audio Tape Cassette System (DAT) Part 5: DAT for Professional Use 1995 CENELEC 05739 EN 61262-7 Medical Electrical Equipment - Characteristics of Electro-Optical X-Ray Image Intensifiers Part 7: Determination of the
Modulation Transfer Function1995 CENELEC 0
5740 EN 60917-2-1 Modular Order for the Development of Mechanical Structures for Electronic Equipment Practices Part 2: SectionalSpecification Interface Co-Ordination Dimensions for the 25 mm Equipment Practice Section 1: Detail Specification -Dimensions for Cabinets and
1995 CENELEC 0
5741 EN 60371-3-3 Specification for Insulating Materials Based on Mica Part 3: Specifications for Individual Materials Sheet 3: Specificationfor Rigid Mica Materials for Heating Equipment
1995 CENELEC 0
5742 EN 60317-19 AMD 1 AMD 2 Specifications for Particular Types of Winding Wires Part 19: Solderable Polyurethane Enamelled RoundCopper Wire Overcoated with Polyamide, Class 130 - Incorporates Amendments A1: 1998 and A2: 2000
1995 CENELEC 0
5743 HD 22.6 S2/A1 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 6: Arc Welding Cables - IncorporatesAmendment A1: 1999
1995 CENELEC 0
5744 EN 134103 Blank Detail Specification: Vane type air dielectric capacitor (Qualification approval) 1995 CENELEC 05745 EN 137101 Blank Detail Specification: Fixed Aluminium Electrolytic a.c. Capacitors with Non-Solid Electrolyte for Motor Starter
Applications Qualifications Approval1995 CENELEC 0
5746 EN 61094-4 Measurement Microphones Part 4: Specifications for Working Standard Microphones 1995 CENELEC 05747 EN 60870-5-5 Telecontrol Equipment and Systems Part 5: Transmission Protocols Section 5: Basic Application Functions 1995 CENELEC 05748 EN 60371-3-6 Specification for Insulating Materials Based on Mica Part 3: Specifications for Individual Materials Sheet 6: Glass-Backed
Mica Paper with a B-Stage Epoxy Resin Binder - Incorporates Amendment A1: 20061995 CENELEC 0
5749 EN 60255-21-1 Electrical Relays Part 21: Vibration, Shock, Bump and Seismic Tests on Measuring Relays and Protection EquipmentSection 1: Vibration Tests (Sinusoidal)
1995 CENELEC 0
5750 EN116205/116206/116207
Blank Details Specification: Hermetically Sealed Relays for Severe Static Environmental Conditions (116205) for SevereMobile Environmental Conditions (116206) for Severe Airborne Environmental Conditions (116207)
1995 CENELEC 0
5751 EN 134104 Blank Detail Specification: Compression type trimmer capacitors (Qualification approval) 1995 CENELEC 05752 EN 61237-3 Broadcast Video Tape Recorders - Methods of Measurement Part 3: Electrical Measurements for Analogue Component
Video Signals1995 CENELEC 0
5753 EN 134100 Sectional Specification: Variable Capacitors (Qualification Approval) 1995 CENELEC 05754 EN 60835-2-9 Methods of Measurement for Equipement Used in Digital Microwave Radio Transmission Systems Part 2: Measurements
on Terrestrial Radio-Relay Systems Section 9: Service Channels1995 CENELEC 0
5755 EN 61041-3 Non-Broadcast Videotape Recorders Methods of Measurement Part 3: Audio Characteristics for FM Recording 1995 CENELEC 05756 EN 61229 Rigid protective covers for live working on a.c. installations - Incorporates Amendments A1: 1998 and A2: 2002 1995 CENELEC 05757 HD 22.14 S1 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 14: Cords for Applications Requiring High
Flexibility1995 CENELEC 0
5758 HD 22.2S2/A10
Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 2: Test Methods 1995 CENELEC 0
5759 EN 60512-15-8 Electomechanical Components for Electronic Equipment - Basic Testing Procedures and Measuring Methods - Part 15:Mechanical Tests on Contacts and Terminations - Section 8: Test 15h - Contact Retention System Resistance to ToolApplication
1995 CENELEC 0
5760 EN 60674-3-4TO 6
Specification for Plastic Films for Electrical Purposes Part 3: Specifications for Individual Materials Sheets 4 to 6:Requirements for Polyimide Films Used for Electrical Insulation
1995 CENELEC 0
5761 HD 21.1 S2/ A8 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 1: General Requirements 1994 CENELEC 05762 EN 61008-2-1 Residual Current Operated Circuit-Breakers without Integral Overcurrent Protection for Household and Similar Uses
(RCCBآ_s) Part 2-1: Applicability of the General Rules to RCCBآ_s Functionally Independent of Line Voltage -Incorporates Amendment A11: 1998
1994 CENELEC 0
5763 EN 181102 Blank Detail Specification: Fibre Optic Branching Devices Type: Wavelength Selective Transmissive Star 1994 CENELEC 05764 EN 61213 Analogue Audio Recording on Video Tape - Polarity of Magnetization 1994 CENELEC 05765 EN 190101 Family Specification: Digital Integrated TTL Circuits Series 54, 64, 74, 84 (CECC 90 101 Issue 2: 1988) 1994 CENELEC 05766 HD 586.2 S1 Mineral Insulated Cables with a Rated Voltage not Exceeding 750 V Part 2: Terminations 1994 CENELEC 05767 EN 60843-1 Helical-Scan Video Tape Cassette System Using 8mm Magnetic Tape - 8 mm Video Part 1: General Specifications 1994 CENELEC 05768 EN 147101 Blank Detail Specification: Relay Sockets of Assessed Quality 1994 CENELEC 05769 EN 60094-4 Magnetic Tape Sound Recording and Reproducing Systems Part 4: Mechanical Magnetic Tape Properties - Incorporates
Amendment A1: 19941994 CENELEC 0
5770 EN 122190 Sectional Specification: Radio Frequency Coaxial Connectors Series 7-16 1994 CENELEC 05771 EN 190108 Family Specification: TTL Advanced Schottky Digital Integrated Circuits Series 54AS, 74AS 1994 CENELEC 05772 EN 129201 Blank Detail Specification: Wirewound Inductors with Ceramic or Ferrite Core Assessment Level E 1994 CENELEC 0
5773 EN 134000 Generic Specification: Variable Capacitors (Qualification Approval and Capability Approval) 1994 CENELEC 05774 EN 190110 Blank Detail Specification: Digital Microprocessor Integrated Circuits 1994 CENELEC 05775 EN 60168 Tests on Indoor and Outdoor Post Insulators of Ceramic Material or Glass for Systems with Nominal Voltages Greater
Than 1 kV - Incorporates Amendments A1: 1997 and A2: 20001994 CENELEC 0
5776 EN 60264-2-2 Packaging of winding wires Part 2-2: Cylindrical barrelled delivery spools Specification for returnable spools made fromthermoplastic material - Incorporates Amendment A1: 2004
1994 CENELEC 0
5777 EN 61262-6 Medical Electrical Equipment - Characteristics of Electro-Optical X-Ray Image Intensifiers Part 6: Determination of theContrast Ratio and Veiling Glare Index
1994 CENELEC 0
5778 EN 60068-2-17 Environmental Testing Part 2: Tests Test Q: Sealing 1994 CENELEC 05779 HD 352.3.4 S1 Specification for Insulating Materials Based on Mica Part 3: Specifications for Individual Materials Sheet 4: Polyester
Film-Backed Mica Paper with a B-Stage Epoxy Resin Binder1994 CENELEC 0
5780 HD 1002 Independent Gas-Fired Convection Heaters with a Natural Draught Burner and a Permanent Pilot 1994 CENELEC 05781 EN 50090-3-1 Home and Building Electronic Systems (HBES) Part 3-1: Aspects of Application Introduction to the Application Structure 1994 CENELEC 05782 HD 586.1 S1 Mineral Insulated Cables with a Rated Voltage not Exceeding 750 V Part 1: Cables 1994 CENELEC 05783 EN 60835-3-5 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 3: Measurements on
Satellite Earth Stations Section 5: Up- and Down- Converters1994 CENELEC 0
5784 EN 60244-12-2 Methods of Measurement for Radio Transmitters Part 12: Guideline for Drawing up Descriptive Leaflets for Transmittersand Transposers for Sound and Television Broadcasting- Specification Sheets
1994 CENELEC 0
5785 EN 61293 Marking of Electrical Equipment with Ratings Related to Electrical Supply - Safety Requirements 1994 CENELEC 05786 EN 60264-1 Packaging of winding wires - Part 1: Containers for round winding wires - Incorporates Amendment A1: 2009 1994 CENELEC 05787 EN 60317-37 No Title 1994 CENELEC 05788 EN 60821 IEC 821 VMEbus - Microprocessor system bus for 1 byte to 4 byte data 1994 CENELEC 05789 EN 190102 Family Specification: TTL Schottky Digital Integrated Circuits Series 54S, 64S, 74S, 84S 1994 CENELEC 05790 EN 61254 Electric Shavers for Household Use - Methods for Measuring the Performance 1994 CENELEC 05791 EN 129202 Blank Detail Specification: Wirewound Inductors with Ceramic or Ferrite Core. Assessment Level P 1994 CENELEC 05792 EN 60099-1 Surge Arresters - Part 1: Non-Linear Resistor Type Gapped Surge Arresters for A.C. Systems - Incorporates Amendment
A1: 19991994 CENELEC 0
5793 EN 60933-4 Audio, Video and Audiovisual Systems - Interconnections and Matching Values Part 4. Connector and Cordset forDomestic Digital Bus (D2B)
1994 CENELEC 0
5794 EN 61152 Dimensions of Metal-Sheathed Thermometer Elements 1994 CENELEC 05795 EN 61119-6 Digital Audio Tape Cassette System (DAT) Part 6: Serial Copy Management System 1994 CENELEC 05796 EN 190107 Family Specification: TTL Fast Digital Integrated Circuits Series 54F, 74F 1994 CENELEC 05797 EN 61223-2-4 Evaluation and Routine Testing in Medical Imaging Departments Part 2-4: Constancy Tests - Hard Copy Cameras 1994 CENELEC 05798 EN 61187 Electrical and Electronic Measuring Equipment - Documentation 1994 CENELEC 05799 EN 60264-2-1 Packaging of winding wires Part 2: Cylindrical barrelled delivery spools Section 1: Basic dimensions - Incorporates
Amendment A1: 20031994 CENELEC 0
5800 EN 61207-2 Expression of Performance of Gas Analyzers Part 2: Oxygen in Gas (Utilizing High-Temperature Electrochemical Sensors) 1994 CENELEC 05801 EN 60774-1 Helical-Scan Video Tape Cassette System Using 12.65 mm (0.5 in) Magnetic Tape on Type VHS Part 1. VHS and
Compact VHS Video Cassette System1994 CENELEC 0
5802 EN 60352-4 Solderless Connections Part 4: Solderless Non-Accessible Insulation Displacement Connections - General Requirements,Test Methods and Practical Guidance - Incorporates Amendment A1: 2000
1994 CENELEC 0
5803 EN 60867 Insulating Liquids - Specifications for Unused Liquids Based on Synthetic Aromatic Hydrocarbons 1994 CENELEC 05804 EN 60961 Helical-Scan Video Tape Cassette System Using 12.65 mm (0.5 in) Magnetic Tape on Type L 1994 CENELEC 05805 EN 61116 Electromechanical Equipment Guide for Small Hydroelectric Installations 1994 CENELEC 0
5806 EN 61168 Radiotherapy Simulators - Functional Performance Characteristics 1994 CENELEC 05807 EN 61262-2 Medical Electrical Equipment - Characteristics of Electro-Optical X-Ray Image Intensifiers Part 2: Determination of the
Conversion Factor1994 CENELEC 0
5808 EN 61198 Mineral Insulating Oils - Methods for the Determination of 2-Furfural and Related Compounds 1994 CENELEC 05809 EN 60510-2-6 Methods of Measurement for Radio Equipment Used in Satellite Earth Stations Part 2: Measurements for Sub-Systems
Section Six: Frequency Demodulators1994 CENELEC 0
5810 EN 60835-2-1 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 2: Measurements onTerrestrial Radio- Relay Systems Section 2.1: General
1994 CENELEC 0
5811 EN 61009-2-1 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO s)Part 2-1: Applicability of the general rules to RCBO s functionally independent of line voltage - Incorporates AmendmentA11: 1998
1994 CENELEC 0
5812 EN 60598-2-25 Luminaires - Part 2-25: Particular requirements - Luminaires for use in clinical areas of hospitals and health care buildings -Incorporates Amendment A1: 2004
1994 CENELEC 0
5813 EN 140211 Blank Detail Specification: Fixed Power Resistors - Capability Approval 1994 CENELEC 05814 EN 61203 Synthetic Organic Esters for Electrical Purposes Guide for Maintenance of Transformer Esters in Equipment 1994 CENELEC 05815 HD 413.2 S2 Operating Conditions for Industrial-Process Measurement and Control Equipment Part 2: Power 1994 CENELEC 05816 EN 61262-4 Medical Electrical Equipment - Characteristics of Electro-Optical X-Ray Image Intensifiers Part 4: Determination of the
Image Distortion1994 CENELEC 0
5817 HD 352.3.5 S1 Specification for Insulating Materials Based on Mica Part 3: Specifications for Individual Materials Sheet 5: Glass-BackedMica Paper with an Epoxy Resin Binder for Post-Impregnation (VPI)
1994 CENELEC 0
5818 EN 61086-1 Coatings for loaded printed wire boards (conformal coatings) Part 1: Definitions, classification and general requirements 1994 CENELEC 05819 EN 122110 Sectional Specification: Radio Frequency Coaxial Connectors. Series SMA 1994 CENELEC 05820 EN 61143-1 Electrical Measuring Instruments - X-t Recorders Part 1: Definitions and Requirements - Incorporates Amendment A1:
19971994 CENELEC 0
5821 EN 116203 Blank Detail Specification: Electromechanical All-or-Nothing Relays for Enhanced Industrial Application 1994 CENELEC 05822 HD 21.8 S1/ A2 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 8: Single Core Non- Sheathed
Cables for Decorative Chains1994 CENELEC 0
5823 EN 60244-8 Methods of Measurement for Radio Transmitters Part 8: Performance Characteristics of Vestigial-Sideband DemodulatorsUsed for Testing Television Transmitters and Transposers
1994 CENELEC 0
5824 EN 61119-1 Digital Audio Tape Cassette System (DAT) Part 1. Dimensions and Characteristics 1994 CENELEC 05825 HD 603 S1 Distribution Cables of Rated Voltage 0.6/1 kV 1994 CENELEC 05826 EN 61234-1 Method of Test for Hydrolytic Stability of Electrical Insulating Materials Part 1: Plastic Films 1994 CENELEC 05827 R105-002 Home and building electronic systems Technical report 2 Guidelines for the professional installation of twisted pair cables
class 11994 CENELEC 0
5828 EN 61223-2-5 Evaluation and Routine Testing in Medical Imaging Departments Part Part 2-5: Constancy Test -Image Display Devices 1994 CENELEC 05829 EN 60264-2-3 Packaging of winding wires Part 2-3: Cylindrical barrelled delivery spools Specification for non-returnable spools made
from thermoplastic material - Incorporates Amendment A1: 20041994 CENELEC 0
5830 EN 61173 Overvoltage Protection for Photovoltaic (PV) Power Generating Systems - Guide 1994 CENELEC 05831 EN 122200 Sectional Specification: Radio Frequency Coaxial Connectors. Series TNC 1994 CENELEC 05832 EN 61262-5 Medical Electrical Equipment - Characteristics of Electro-Optical X-Ray Image Intensifiers Part 5: Determination of the
Detective Quantum Efficiency1994 CENELEC 0
5833 EN 61183 Electroacoustics - Random-Incidence and Diffuse-Field Calibration of Sound Level Meters 1994 CENELEC 05834 EN 181000 Generic Specification: Fibre Optic Branching Devices 1994 CENELEC 05835 EN 60352-3 Solderless Connections Part 3: Solderless Accessible Insulation Displacement Connections - General Requirements, Test
Methods and Practical Guidance1994 CENELEC 0
5836 EN 60264-3-3 Packaging of winding wires Part 3-3: Taper barrelled delivery spools Specification for non-returnable spools made fromthermoplastic material - Incorporates Amendment A1: 2004
1994 CENELEC 0
5837 HD 21.1S2/A13
AMD 13 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 1: GeneralRequirements
1994 CENELEC 0
5838 EN 60917-2 Modular Order for the Development of Mechanical Structures for Electronic Equipment Practices Part 2: SectionalSpecification - Interface Co-Ordination Dimensions for the 25 mm Equipment Practice
1994 CENELEC 0
5839 EN 60264-4-2 Packaging of winding wires Part 4-2: Methods of test Containers made from thermoplastic material for taper barrelleddelivery spools - Incorporates Amendment A1: 2004; Incorporating Corrigendum March 2005
1994 CENELEC 0
5840 EN 190109 Family Specification: Digital Integrated HC MOS Circuits Series HC/HCT/HCU 1994 CENELEC 05841 EN 122003 Blank Detail Specification for the Preparation of Customer Detail Specifications (CDS) and Detail Specifications for
Standard Production Items with Capability Approval1994 CENELEC 0
5842 EN 186130 Sectional Specification: Connector Sets for Optical Fibres and Cables. Type LSA 1994 CENELEC 05843 EN 60240-1 Characteristics of Electric Infra-Red Emitters for Industrial Heating Part 1: Short Wave Infra-Red Emitters 1994 CENELEC 05844 EN 60510-3-4 Methods of Measurement for Radio Equipment Used in Satellite Earth Stations Part 3: Methods of Measurement on
Combinations of Sub- Systems Section Four: Measurements for Frequency Division Multiplex (f.d.m.) Transmission1994 CENELEC 0
5845 EN 60317-4 Specifications for Particular Types of Winding Wires Part 4: Solderable Polyurethane Enamelled Round Copper Wire,Class 130 - Incorporates Amendments A1: 1998 and A2: 2000
1994 CENELEC 0
5846 EN 60835-2-7 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 2: Measurements onTerrestrial Radio-Relay Systems Section 7: Diversity Switching and Combining Equipment
1994 CENELEC 0
5847 EN 60041 Field Acceptance Tests to Determine the Hydraulic Performance of Hydraulic Turbines, Storage Pumps and Pump-Turbines
1994 CENELEC 0
5848 EN 116204 Blank Detail Specification: Electromechanical All-or-Nothing Sealed Relays for Aggressive Industrial Application 1994 CENELEC 05849 EN 60598-2-6 Luminaires Part 2: Particular Requirements Section 6: Luminaires with Built-In Transformers or Converters for Filament
Lamps - Incorporates Amendment A1: 19971994 CENELEC 0
5850 EN 61237-1 Broadcast Video Tape Recorders - Methods of Measurement Part 1 : Mechanical Measurments 1994 CENELEC 05851 EN 61205 Ultrasonics - Dental Descaler Systems Measurement and Declaration of the Output Characteristics 1994 CENELEC 05852 EN 60068-2-66 Environmental Testing Part 2: Test Methods Test Cx: Damp Heat, Steady State (Unsaturated Pressurized Vapour) 1994 CENELEC 05853 HD 604 S1 0.6/1 kV Power Cables with Special Fire Performance for Use in Power Stations 1994 CENELEC 05854 EN 61119-2 Digital Audio Tape Cassette System (DAT) Part 2: DAT Calibration Tape 1994 CENELEC 05855 EN 60510-2-5 Methods of Measurement for Radio Equipment Used in Satellite Earth Stations Part 2: Measurements for Sub-Systems
Section Five: Frequency Modulators1994 CENELEC 0
5856 EN 181101 Blank Detail Specification: Fibre Optic Branching Devices Type: Non Wavelength Selective Transmissive Star 1994 CENELEC 05857 EN 60454-1 Specifications for Pressure-Sensitive Adhesive Tapes for Electrical Purposes Part 1: General Requirements 1994 CENELEC 05858 EN 129200 Sectional Specification: Fixed Inductors with Ceramic or Ferrite Core Wound with Copper Wire for RF Circuits -
Incorporates Amendment A1: 19951994 CENELEC 0
5859 EN 61262-3 Medical Electrical Equipment - Characteristics of Electro-Optical X-Ray Image Intensifiers Part 3: Determination of theLuminance Distribution and Luminance Non-Uniformity
1994 CENELEC 0
5860 EN 61262-1 Medical Electrical Equipment - Characteristics of Electro-Optical X-Ray Image Intensifiers Part 1: Determination of theEntrance Feild Size
1994 CENELEC 0
5861 EN 61197 Insulating Liquids - Linear Flame Propagation Test Method Using a Glass-Fibre Tape 1994 CENELEC 05862 EN 129102 Blank Detail Specification: Wirewound Surface Mounting Inductors of Assessed Quality. Assessment Level P 1994 CENELEC 05863 EN 60835-2-2 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 2: Measurements on
Terrestrial Radio- Relay Systems Section 2: Antenna1994 CENELEC 0
5864 EN 61143-2 Electrical Measuring Instruments - X-t Recorders Part 2: Recommended Additional Test Methods - IncorporatesAmendment A1: 1995
1994 CENELEC 0
5865 EN 60712 Helical-Scan Video-Tape Cassette System Using 19 mm (3/4 in) Magnetic Tape, Known as U-Format - IncorporatesAmendment A1: 1994
1994 CENELEC 0
5866 EN 190103 Family Specification: Digital Integrated TLL Low Power Schottky Circuits Series 54 LS, 64LS, 74LS, 84LS 1994 CENELEC 05867 EN 140210 Sectional Specification: Fixed Power Resistors - Capability Approval 1994 CENELEC 05868 EN 60244-9 Methods of Measurement for Radio Transmitters Part 9: Performance Characteristics for Television Transposers 1994 CENELEC 05869 EN 61119-3 Digital Audio Tape Cassette System (DAT) Part 3: DAT Tape Properties 1994 CENELEC 05870 EN 60835-3-10 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 3: Measurements on
Satellite Earth Stations Section 10: Terminal Equipment - TDMA Traffic Earth Station1994 CENELEC 0
5871 EN 60598-2-18 Luminaires Part 2: Particular requirements Section 18: Luminaires for swimming pools and similar applications -Incorporating Corrigendum May 1996; Incorporates Amendment A1: 2012
1994 CENELEC 0
5872 EN 61043 Electroacoustics - Instruments for the Measurement of Sound Intensity - Measurement with Pairs of Pressure SensingMicrophones
1994 CENELEC 0
5873 EN 60244-5 Methods of Measurement for Radio Transmitters Part 5: Performance Characteristics of Television Transmitters 1994 CENELEC 05874 EN 190106 Family Specification: TTL Advanced Low Power Schottky Digital Integrated Circuits Series 54ALS, 74ALS 1994 CENELEC 05875 EN 60244-13 Methods of Measurement for Radio Transmitters Part 13: Performance Characteristics for FM Sound Broadcasting 1993 CENELEC 05876 EN 61120-1 Digital Audio Tape Recorder Reel to Reel System, Using 6,3 mm Magnetic Tape, for Professional Use Part 1: General
Requirements1993 CENELEC 0
5877 EN 61079-1 Methods of Measurement on Receivers for Satellite Broadcast Transmissions in the 12 GHz Band Part 1: Radio-FrequencyMeasurements on Outdoor Units
1993 CENELEC 0
5878 EN 60868 Flickermeter - Functional and Design Specifications 1993 CENELEC 05879 HD 503 S2 Lamps for Road Vehicles - Performance Requirements 1993 CENELEC 05880 EN 60774-3 Helical-Scan Video Tape Cassette System Using 12,65 mm (0,5 in) Magnetic Tape on Type VHS Part 3: S-VHS 1993 CENELEC 05881 HD 493.3 S2 Dimensions of Mechanical Structures of the 482.6 mm (19 in) Series - Part 3: Subracks and Associated Plug-in Units 1993 CENELEC 05882 EN 169100 Sectional Specification: Quartz Crystal Controlled Oscillators (Capability Approval) - Remains Current 1993 CENELEC 05883 EN 60870-5-4 Telecontrol Equipment and Systems Part 5: Transmission Protocols Section 4: Definition and Coding of Application
Information Elements1993 CENELEC 0
5884 HD 243 S10 Graphical Symbols for Use on Equipment - Index, Survey and Compilation of the Single Sheets (IEC 417:1973 + 417A:1974 to 417K:1991)
1993 CENELEC 0
5885 EN 147100 Sectional Specification: Relay Sockets of Assessed Quality 1993 CENELEC 05886 EN 186230 Sectional Specification: Connector Sets for Optical Fibres and Cables Type LSF 1993 CENELEC 05887 EN 60721-3-0 Classification of Environmental Conditions Part 3: Classification of Groups of Environmental Parameters and Their
Severities Introduction1993 CENELEC 0
5888 HD 311.2 S3 Magnetic Tape Sound Recording and Reproducing Systems Part 2: Calibration Tapes 1993 CENELEC 05889 EN 60244-12-1 Methods of Measurement for Radio Transmitters Part 12: Guideline for Drawing up Descriptive Leaflets for Transmitters
and Transposers for Sound and Television Broadcasting - Characteristics to be Specified1993 CENELEC 0
5890 EN 60068-3-3 Environmental Testing Part 3: Guidance Seismic Test Methods for Equipments 1993 CENELEC 05891 EN 168200 Sectional Specification: Quartz Crystal Units (Qualification Approval) - Incorporates Amendment A1: 1993 1993 CENELEC 05892 EN 60382 Analogue Pneumatic Signal for Process Control Systems 1993 CENELEC 05893 EN 122140 Sectional Specification: Radio Frequency Coaxial Connectors. Series SMC 1993 CENELEC 05894 EN 60068-2-61 Environmental Testing Part 2: Test Methods Test Z/ABDM: Climatic Sequence 1993 CENELEC 05895 EN 147000 Generic Specification: Sockets for Use with Electrical Relays of Assessed Quality 1993 CENELEC 05896 EN 60604 Topflash/Flipflash Photographic Flash Lamp Array 1993 CENELEC 05897 EN 60682 Standard Method of Measuring the Pinch Temperature of Quartz- Tungsten-Halogen Lamps - Incorporates Amendment
A2: 19971993 CENELEC 0
5898 HD 483.10 S1 Sound System Equipment Part 10: Peak Programme Level Meters 1993 CENELEC 05899 EN 60719 Calculation of the Lower and Upper Limits for the Average Outer Dimensions of Cables with Circular Copper Conductors
and of Rated Voltages up to and Including 450/750 V1993 CENELEC 0
5900 EN 60169-24 Radio-Frequency Connectors Part 24: Radio-Frequency Coaxial Connectors with Screw Coupling, Typically for Use in 75ohm Cable Distribution Systems (Type F)
1993 CENELEC 0
5901 EN 60574-21 Audiovisual, Video and Television Equipment and Systems Part 21: Video Tape Leader and Trailer for Education andTraining Applications
1993 CENELEC 0
5902 HD 490.2 S2 Methods of Test for Winding Wires Part 2: Determination of Dimensions 1993 CENELEC 05903 EN 60721-3-9 Classification of Environmental Conditions Part 3: Classification of Groups of Environmental Parameters and Their
Severities Section 9: Microclimates Inside Products - Incorporates Amendment A1: 19951993 CENELEC 0
5904 EN 122120 Sectional Specification: Radio Frequency Coaxial Connectors Series BNC 1993 CENELEC 05905 EN 122160 Sectional Specification: Radio Frequency Coaxial Connectors. Series SSMA 1993 CENELEC 05906 EN 60244-11 Methods of Measurement for Radio Transmitters Part 11: Transposers for FM Sound Broadcasting 1993 CENELEC 05907 EN 60619 Electrically operated food preparation appliances Methods for measuring the performance - Incorporates Amendments A1:
1995 and A2: 20041993 CENELEC 0
5908 EN 61065 Method for Evaluating the Low Temperature Flow Properties of Mineral Insulating Oils After Ageing 1993 CENELEC 05909 EN 116303 Blank Detail Specification: Electromechanical All- Or-Nothing Heavy Load Relays of Assessed Quality (Hermetically
Sealed, 5 A to 25 A)1993 CENELEC 0
5910 HD 523.3.116TO 118 S1
Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheets116 to 118: Extruded Polychloroprene, General Purpose
1993 CENELEC 0
5911 EN 60045-1 Steam Turbines Part 1: Specifications 1993 CENELEC 05912 HD 490.3 S3 Methods of Test for Winding Wires Part 3: Mechanical Properties 1993 CENELEC 05913 EN 60097 Grid Systems for Printed Circuits - Incorporating Corrigendum January 1993 1993 CENELEC 05914 HD 21.1 S2/
A12Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 1: General Requirements 1993 CENELEC 0
5915 EN 60143 Series Capacitors for Power Systems Part 1: General - Performance, Testing and Rating - Safety Requirements - GuideInstallation
1993 CENELEC 0
5916 EN 61030 Audio, Video and Audiovisual Systems Domestic Digital Bus (D2B) 1993 CENELEC 05917 EN 61106 Videodisks - Methods of Measurements for Parameters 1993 CENELEC 05918 EN 60061-2 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders -
Incorporates Amendment A50: 20151993 CENELEC 0
5919 EN 60721-3-6 Classification of Environmental Conditions Part 3: Classification of Groups of Environmental Parameters and TheirSeverities Ship Environment - Incorporates Amendment A2: 1997
1993 CENELEC 0
5920 EN 60835-2-10 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 2: Measurements onTerrestrial Radio- Relay Systems Section Ten - Overall System Performance
1993 CENELEC 0
5921 EN 60856 Pre-Recorded Optical Reflective Videodisk System `Laser Vision 50 Hz/625 Lines - PAL - Incorporates Amendments A1:1993 and A2: 1997
1993 CENELEC 0
5922 EN 61166 High-Voltage Alternating Current Circuit-Breakers Guide for Seismic Qualification of High- Voltage Alternating CurrentCircuit- Breakers
1993 CENELEC 0
5923 HD 483.12 S2 Sound System Equipment Part 12: Application of Connectors for Broadcast and Similar Use 1993 CENELEC 05924 EN 60870-5-2 Telecontrol Equipment and Systems Part 5: Transmission Protocols Section 2: Link Transmission Procedures 1993 CENELEC 05925 EN 129100 Sectional Specification: Wirewound Surface Mounting Inductors - Incorporates Amendment A1: 1995 1993 CENELEC 05926 EN 60564 D.C. Bridges for Measuring Resistance - Incorporates Amendment A2: 1997 1993 CENELEC 05927 EN 61144 Test Method for the Determination of Oxygen Index of Insulating Liquids 1993 CENELEC 05928 HD 523.3.420
TO 422 S1Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheets420 to 422: Polyethylene Terephthalate Textile with Acrylic Based Coating
1993 CENELEC 0
5929 HD 21.10 S1 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 10: Extensible Leads 1993 CENELEC 05930 HD 555.0.1 S2 Specifications for Particular Types of Winding Wires Part 0: General Requirements Section 1 - Enamelled Round Copper
Wire1993 CENELEC 0
5931 EN 60969 Self-Ballasted Lamps for General Lighting Services - Performance Requirements - Incorporates Amendments A1: 1993and A2: 2000
1993 CENELEC 0
5932 HD 523.3.400TO 402 S1
Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheets400 to 402: Glass Textile Sleeving with Silicone Elastomer Coating
1993 CENELEC 0
5933 EN 61122 Still Video Floppy Disc Magnetic Recording System 1993 CENELEC 05934 EN 60870-5-1 Telecontrol Equipment and Systems Part 5: Transmission Protocols Section One: Transmission Frame Formats 1993 CENELEC 05935 EN 60801-2 Electromagnetic Compatibility for Industrial-Process Measurement and Control Equipment Part 2: Electrostatic Discharge
Requirements1993 CENELEC 0
5936 EN 61079-2 Methods of Measurement on Receivers for Satellite Broadcast Transmissions in the 12 GHz Band Part 2: ElectricalMeasurements on DBS Tuner Units
1993 CENELEC 0
5937 EN 122002 Blank Detail Specification: Radio Frequency Coaxial Connectors 1993 CENELEC 05938 HD 53.8 S4 Rotating Electrical Machines Part 8: Terminal Markings and Direction of Rotation of Rotating Machines 1993 CENELEC 05939 EN 130200 Sectional Specification: Fixed Tantalum Capacitors with Non-Solid or Solid Electrolyte - Incorporates Amendment A3:
19981993 CENELEC 0
5940 EN 61120-3 Digital Audio Tape Recorder Reel to Reel System, Using 6,3 mm Magnetic Tape, for Professional Use Part 3: Format B 1993 CENELEC 05941 EN 60169-23 Radio-Frequency Connectors Part 23: Pin and Socket Connector for Use with 3,5 mm Rigid Precision Coaxial Lines with
Inner Diameter of Outer Conductor 3,5 mm (0,1378 in)1993 CENELEC 0
5942 EN 61120-2 Digital Audio Tape Recorder Reel to Reel System, Using 6,3 mm Magnetic Tape, for Professional Use Part 2: Format A 1993 CENELEC 05943 EN 61118 Helical-Scan Video Tape Cassette Using 12,65 mm (0,5 in) Magnetic Tape - Type M2 1993 CENELEC 05944 EN 122130 Sectional Specification: Radio Frequency Coaxial Connectors. Series SMB 1993 CENELEC 05945 EN 60061-1 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps -
Incorporates Amendment A57: 20181993 CENELEC 0
5946 EN 60868-0 Flickermeter Part 0: Evaluation of Flicker Severity 1993 CENELEC 05947 EN 60756 Non-Broadcast Video Tape Recorders Time Base Stability 1993 CENELEC 05948 HD 22.2 S2/ A9 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 2: Test Methods 1993 CENELEC 05949 EN 61049 Capacitors for Use in Tubular Fluorescent and Other Discharge Lamp Circuits Performance Requirements 1993 CENELEC 05950 EN 169101 Blank Detail Specification: Quartz Crystal Controlled Oscillators (Capability Approval) - Remains Current 1993 CENELEC 05951 EN 50077 Low-Profile Connector for Implantable Cardiac Pacemakers - Incorporating Corrigendum November 1993 1993 CENELEC 05952 EN 60933-5 Audio, Video and Audiovisual Systems Interconnections and Matching Values Part 5: Y/C Connector for Video Systems -
Electrical Matching Values and Description of the Connector1993 CENELEC 0
5953 EN 60524 Direct-Current Resistive Volt Ratio Boxes - Incorporates Amendment A2: 1997 1993 CENELEC 05954 EN 61115 Expression of Performance of Sample Handling Systems for Process Analyzers 1993 CENELEC 05955 EN 61075 Loran-C Receivers for Ships - Minimum Performance Standards - Methods of Testing and Required Test Results 1993 CENELEC 05956 EN 61064 Acceptance Tests for Steam Turbine Speed Control Systems 1993 CENELEC 05957 EN 60244-10 Methods of Measurement for Radio Transmitters Part 10 : Methods of Measurement for Television Transmitters and
Transposers Employing Insertion Test Signals1993 CENELEC 0
5958 EN 60146-1-3 Semiconductor Convertors General Requirements and Line Commutated Convertors Part 1-3: Transformers and Reactors -Remains Current
1993 CENELEC 0
5959 EN 60835-1-2 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 1: MeasurementsCommon to Terrestrial Radio-Relay Systems and Satellite Earth Stations Section 2: Basic Characteristics - IncorporatesAmendment A1: 1995
1993 CENELEC 0
5960 EN 60034-7 Rotating Electrical Machines - Part 7: Classification of Types of Construction, Mounting Arrangements and TwerminalBox Position (IM Code) - Incorporates Amendment A1: 2001
1993 CENELEC 0
5961 HD 21.1 S2/ A9 AMD 9 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 1: GeneralRequirements
1993 CENELEC 0
5962 EN 60094-1 Magnetic Tape Sound Recording and Reproducing Systems Part 1: General Conditions and Requirements - IncorporatesAmendment A1: 1994
1993 CENELEC 0
5963 EN 60061-3 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges - IncorporatesAmendment A51: 2015
1993 CENELEC 0
5964 HD 555.0.4 S2 Specifications for Particular Types of Winding Wires Part 0: General Requirements Section 4: Glass-Fibre Wound Bare orEnamelled Rectangular Copper Wire
1993 CENELEC 0
5965 HD 395.1 S2/A1
AMD 1 Medical Electrical Equipment Part 1: General Requirements for Safety 1993 CENELEC 0
5966 EN 122001 Blank Detail Specification: CECC Military Specification for Radio Frequency Connectors (Type MIL-C- 39012) 1993 CENELEC 05967 EN 60843-3 Helical-Scan Video Tape Cassette System Using 8 mm Magnetic Tape - 8 mm Video Part 3: High- Band Specifications for
Hi 81993 CENELEC 0
5968 EN 61105 Reference Tapes for Video Tape Recorder Systems 1993 CENELEC 05969 EN 122170 Sectional Specification: Radio Frequency Coaxial Connectors. Series SSMB 1993 CENELEC 05970 EN 61179 Helical-Scan Digital Composite Video Cassette Recording System Using 19 mm Magnetic Tape, Format D2 (NTSC, PAL,
PAL-M)1993 CENELEC 0
5971 HD 523.3.240TO 243 S1
Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheets240 to 243: Heat-Shrinkable PTFE Sleeving
1993 CENELEC 0
5972 EN 129000 Generic Specification: Fixed RF Wound Inductors - Incorporates Amendment A1: 1995 1993 CENELEC 05973 HD 352.3.2 S1 Specification for Insulating Materials Based on Mica Part 3: Specifications for Individual Materials Sheet 2: Mica Paper 1993 CENELEC 05974 HD 555.0.2 S2 Specifications for Particular Types of Winding Wires Part 0: General Requirements Section 2 - Enamelled Rectangular
Copper Wire1993 CENELEC 0
5975 EN 61079-5 Methods of Measurement on Receivers for Satellite Broadcast Transmissions in the 12 GHz Band Part 5: ElectricalMeasurements on Decoder Units for MAC/Packet Systems
1993 CENELEC 0
5976 EN 60835-2-3 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 2: Measurements onTerrestrial Radio-Relay Systems Section 3: RF Branching Networks
1993 CENELEC 0
5977 EN 122150 Sectional Specification: Radio Frequency Coaxial Connectors Series EIA Flange 1993 CENELEC 05978 ENV 190000-6 Generic Specification: Monolithic Integrated Circuits Procedure for Approval and Quality Management 1993 CENELEC 05979 EN 61219 Live Working - Earthing or Earthing and Short- Circuiting Equipment Using Lances as a Short- Circuiting Device - Lance
Earthing1993 CENELEC 0
5980 EN 61176 Hand-Held Electric Mains Voltage Operated Circular Saws - Methods for Measuring the Performance 1993 CENELEC 05981 EN 60654-1 Industrial-Process Measurement and Control Equipment - Operating Conditions Part 1: Climatic Conditions 1993 CENELEC 05982 EN 186220 Sectional Specification: Connector Sets for Optical Fibres and Cables Type LSC 1993 CENELEC 05983 EN 60835-2-8 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 2: Measurements on
Terrestrial Radio-Relay Systems Section 8: Adaptive Equalizer - Incorporates Amendment A1: 19961993 CENELEC 0
5984 HD 553 S2 Current Transformers 1993 CENELEC 05985 EN 60169-25 Radio-Frequency Connectors Part 25: Two-Pole Screw (3/4-20 UNEF) Coupled Connectors for Use with Shielded
Balanced Cables Having Twin Inner Conductors with Inner Diameter of Outer Conductor 13,56 mm (0,534 in) (TypeTWHN)
1993 CENELEC 0
5986 EN 116300 Sectional Specification: Electromechanical All- or-Nothing Heavy Load Relays of Assessed Quality (Rated from 5 A andAbove)
1993 CENELEC 0
5987 EN 190116 Family Specification: AC MOS Digital Integrated Circuits 1993 CENELEC 05988 EN 190100 Sectional Specification: Digital Monolithic Integrated Circuits 1993 CENELEC 0
5989 EN 61079-3 Methods of Measurement on Receivers for Satellite Broadcast Transmissions in the 12 GHz Band Part 3: ElectricalMeasurements of Overall Performance of Receiver Systems Comprising an Outdoor Unit and a DBS Tuner Unit
1993 CENELEC 0
5990 EN 60523 Direct-Current Potentiometers - Incorporates Amendment A2: 1997 1993 CENELEC 05991 EN 60094-7 Magnetic Tape Sound Recording and Reproducing Systems Part 7: Cassette for Commercial Tape Records and Domestic
Use - Incorporates Amendment A1: 19961993 CENELEC 0
5992 EN 60034-6 Rotating Electrical Machines Part 6: Methods of Cooling (IC Code) 1993 CENELEC 05993 EN 129101 Blank Detail Specification: Wirewound Surface Mounting Inductors of Assessed Quality Assessment Level E (+A1 August
1994)1993 CENELEC 0
5994 HD 483.2 S2 Sound System Equipment Part 2: Explanation of General Terms and Calculation Methods 1993 CENELEC 05995 EN 60094-5 Magnetic Tape Sound Recording and Reproducing Systems Part 5: Electrical Magnetic Tape Properties - Incorporates
Amendment A1: 19961993 CENELEC 0
5996 EN 122180 Sectional Specification: Radio Frequency Coaxial Connectors Series SSMC 1993 CENELEC 05997 EN 60068-2-7 Basic Environmental Testing Procedures Part 2: Tests Test Ga and Guidance: Acceleration, Steady State 1993 CENELEC 05998 EN 168100 Sectional Specification: Quartz Crystal Units (Capability Approval) - Incorporates Amendments A1 and A2: 1993 1993 CENELEC 05999 EN 61096 Methods of Measuring the Characteristics of Reproducing Equipment for Digital Audio Compact Discs - Incorporates
Amendment A1: 19961993 CENELEC 0
6000 HD 555.0.3 S1 Specifications for Particular Types of Winding Wires Part 0: General Requirements Section 3: Enamelled RoundAluminium Wire
1992 CENELEC 0
6001 EN 123500 Sectional Specification: Flexible Printed Boards with Through Connections - Incorporates Amendment A2: 1995 1992 CENELEC 06002 HD 22.4 S2 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 4: Cords and Flexible Cables (Reprint
Incorporating A1 to A5)1992 CENELEC 0
6003 HD 53.1 S2/ A3 AMD 3 Rotating Electrical Machines - Part 1: Rating and Performance 1992 CENELEC 06004 EN 60068-2-45 Basic Safety Publication - Environmental testing Part 2: Test methods Test XA and guidance: immersion in cleaning
solvents - Incorporates Amendment A1: 19931992 CENELEC 0
6005 HD 555.31 S1 Specifications for Particular Types of Winding Wires Part 31: Glass-Fibre Wound, Polyester or Polyesterimide Varnish-Treated, Bare or Enamelled Rectangular Copper Wire, Temperature Index 180
1992 CENELEC 0
6006 EN 61050 Transformers for Tubular Discharge Lamps Having a No-Load Output Voltage Exceeding 1000 V (Generally Called Neon-Transformers) General and Safety Requirements - Incorporating corrigendum March 1992; Incorporates Amendment A1:1995
1992 CENELEC 0
6007 EN 136000 Generic Specification: Magnetrons 1992 CENELEC 06008 HD 282 S1/A1 AMD 1 Safety of Household and Similar Electrical Appliances Part 2: Particular Requirements for Instantaneous Water
Heaters1992 CENELEC 0
6009 HD 555.23 S2 Specifications for Particular Types of Winding Wires Part 23: Solderable Polyesterimide Enamelled Round Copper Wire,Class 180
1992 CENELEC 0
6010 EN 123200 Sectional Specification: Single and Double Sided Printed Boards with Plated-Through Holes 1992 CENELEC 06011 HD 593.1 S1 Microprocessor System Bus - 8-Bit and 16-Bit Data (MULTIBUS I) Part 1: Functional Description with Electrical and
Timing Specifications1992 CENELEC 0
6012 HD 395.2.11 S2 Medical Electrical Equipment Part 2: Particular Requirements for the Safety of Gamma Beam Therapy Equipment 1992 CENELEC 06013 HD 546.4 S1 Telecontrol Equipment and Systems Part 4: Performance Requirements 1992 CENELEC 06014 EN 169000 Generic Specification: Quartz Crystal Controlled Oscillators - Incorporates Amendment A1: 1998; Remains Current 1992 CENELEC 06015 HD 539 S2 Reactors 1992 CENELEC 06016 EN 120007 Blank Detail Specification: Liquid Crystal Displays Monochrome LCDs without Electronic Circuit 1992 CENELEC 06017 EN 135001 Blank Detail Specification: C.W. Power Amplifier Travelling Wave Tubes up to 500 Watts 1992 CENELEC 06018 HD 46.2.2 S1 Packaging of Winding Wires Part 2: Cylindrical Barrelled Delivery Spools Section 2: Specification for Returnable Spools
Made from Thermoplastic Material1992 CENELEC 0
6019 EN 60984 Sleeves of insulating material for live working - Incorporates Amendments A11: 1997 and A1: 2002 1992 CENELEC 0
6020 EN 120001 Blank Detail Specification: Light Emitting Diodes, Light Emitting Diode Arrays, Light Emitting Diode Displays WithoutInternal Logic and Resistor
1992 CENELEC 0
6021 HD 619 S1 Non-Broadcast Video Tape Recorders - Methods of Measurement Part 1: General Video (NTSC/PAL) and Audio(Longitudinal) Characteristics
1992 CENELEC 0
6022 EN 120004 Blank Detail Specification: Ambient Rated Photocouplers with Phototransistor Output 1992 CENELEC 06023 HD 548.3 S1 Instrument Transformers Part 3: Combined Transformers 1992 CENELEC 06024 EN 123400 Sectional Specification: Flexible Printed Boards Without Through Connections 1992 CENELEC 06025 HD 46.3.2 S1 Packaging of Winding Wires Part 3: Taper Barrelled Delivery Spools Section 2: Specification for Returnable Spools Made
from Thermoplastic Material1992 CENELEC 0
6026 HD 506 S1/A1 AMD 1 Bushings for Liquid Transformers Above 1kv up to 33kv 1992 CENELEC 06027 HD 466.6 S2 Methods of Measurement for Radio Equipment Used in the Mobile Services Part 6: Selective- Calling and Data Equipment 1992 CENELEC 06028 HD 615 S1 D.C. Bridges for Measuring Resistance 1992 CENELEC 06029 HD 553 S1 Current Transformers 1992 CENELEC 06030 EN 123400-800 Capability Detail Specification: Flexible Printed Boards Without Through Connections 1992 CENELEC 06031 HD 21.7 S1/ A1 AMD 1 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 7: Single Core Non-
Sheathed Cables for Internal Wiring for a Conductor Temperature of 90 Degrees Celsius1992 CENELEC 0
6032 HD 143.3 S2 Packaging of Components for Automatic Handling Part 3: Packaging of Leadless Components on Continuous Tapes 1992 CENELEC 06033 HD 46.3.4 S1 Packaging of Winding Wires Part 3: Taper Barrelled Delivery Spools Section 4: Basic Dimensions of Containers for Taper
Barrelled Delivery Spools1992 CENELEC 0
6034 HD 606.1 S1 Measurement of Smoke Density of Electric Cables Burning Under Defined Conditions Part 1: Test Apparatus 1992 CENELEC 06035 HD 186 S2/A1 AMD 1 Marking by Inscription for the Identification of Cores of Electric Cables Having More Than 5 Cores 1992 CENELEC 06036 EN 136001 Blank Detail Specification: Pulsed Magnetrons (Excluding Frequency Agile Magnetrons) 1992 CENELEC 06037 HD 555.33 S1 Specifications for Particular Types of Winding Wires Part 33: Glass-Fibre Wound, Silicone Varnish-Treated, Bare or
Enamelled Rectangular Copper Wire, Temperature Index 2001992 CENELEC 0
6038 HD 555.16 S2 Specifications for Particular Types of Winding Wires Part 16: Polyester Enamelled Rectangular Copper Wire, Class 155 1992 CENELEC 06039 EN 61120-4 Digital Audio Tape Recorder Reel-to-Reel System, Using 6,3 mm Magnetic Tape, for Professional Use Part 4: Magnetic
Tape Properties: Definitions and Methods of Measurement1992 CENELEC 0
6040 HD 1004 Mobile Access and Working Towers Made of Prefabricated Elements - Materials, Dimensions, Design Loads and SafetyRequirements
1992 CENELEC 0
6041 HD 22.7 S1 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 7: Cables with Increased Heat Resistancefor Internal Wiring for a Conductor Temperature of 110 Degrees C (Reprint Incorporating A1)
1992 CENELEC 0
6042 HD 539 S2CORR 1
CORRIGENDUM Reactors 1992 CENELEC 0
6043 HD 323.2.58 S1 Environmental Testing - Part 2: Tests Test Td: Solderability, Resistance to Dissolution of Metallization and to SolderingHeat of Surface Mounting Devices (SMD)
1992 CENELEC 0
6044 HD 477.3 S1 Methods of Measurement for Equipment Used in Terrestrial Radio-Relay Systems Part 3: Simulated Systems 1992 CENELEC 06045 HD 395.2.20 S1 Medical Electrical Equipment Part 2: Particular Requirements for Safety of Transport Incubators 1992 CENELEC 06046 HD 22.1 S2 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 1: General Requirements (Reprint
Incorporating A1 to A10)1992 CENELEC 0
6047 HD 555.22 S2 Specifications for Particular Types of Winding Wires Part 22: Polyester or Polyesterimide Enamelled Round Copper WireOvercoated with Polyamide, Class 180
1992 CENELEC 0
6048 EN 120003 Blank Detail Specification: Phototransistors, Photodarlington Transistors, Phototransistor Arrays 1992 CENELEC 06049 HD 483.17 S1 Sound System Equipment Part 17: Standard Volume Indicators 1992 CENELEC 06050 HD 313.2.14 S2 Base Materials for Printed Circuits Part 2: Specifications Specification No. 14: Phenolic Cellulose Paper Copper-Clad
Laminated Sheet of Defined Flammability (Vertical Burning Test), Economic Quality1992 CENELEC 0
6051 HD 22.4 S2/ A6 AMD 6 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 4: Cords and Flexible Cables 1992 CENELEC 06052 EN 120002 Blank Detail Specification: Infrared Emitting Diodes, Infrared Emitting Diode Arrays 1992 CENELEC 06053 HD 22.1 S2/
A13AMD 13 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 1: General Requirements 1992 CENELEC 0
6054 HD 555.4 S2 Specifications for Particular Types of Winding Wires Part 4: Solderable Polyurethane Enamelled Round Copper Wire,Class 130
1992 CENELEC 0
6055 HD 555.19 S2 Specifications for Particular Types of Winding Wires Part 19: Solderable Polyurethane Enamelled Round Copper WireOvercoated with Polyamide, Class 130
1992 CENELEC 0
6056 HD 608 S1 Generic Specification for Symmetric Pair/Quad and Multicore Cables for Digital Communication 1992 CENELEC 06057 HD 612 S1 Standard Cells 1992 CENELEC 06058 HD 22.9 S1 Rubber Insulated Cables of Rated Voltages up to and Including 450/750V - Part 9: Single Core Non-Sheathed Cables for
Fixed Wiring Low Emission of Smoke and Corrosive Gases1992 CENELEC 0
6059 HD 22.2 S2 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 2: Test Methods (Reprint Incorporating A1to A4)
1992 CENELEC 0
6060 HD 400.3M S2 Hand-Held Motor Operated Tools Part II: Particular Specifications Section M: Planers 1992 CENELEC 06061 HD 555.34 S1 Specifications for Particular Types of Winding Wires Part 34: Polyester Enamelled Round Copper Wire, Class 130 1992 CENELEC 06062 HD 494 S3 Lamps for Road Vehicles - Dimensional, Electrical and Luminous Requirements 1992 CENELEC 06063 HD 611.5 S1 Guide for the Determination of Thermal Endurance Properties of Electrical Insulating Materials Part 5: Guidelines for the
Application of Thermal Endurance Characteristics1992 CENELEC 0
6064 HD 22.8 S1/ A2 AMD 2 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V - Part 8: Polychloroprene or EquivalentSynthetic Elastomer Sheathed Cables for Use as Decorative Chains
1992 CENELEC 0
6065 HD 593.2 S1 Microprocessor System Bus - 8-Bit and 16-Bit Data (MULTIBUS I) Part 2: Mechanical and Pin Descriptions for theSystem Bus Configuration, with Edge Connectors (Direct)
1992 CENELEC 0
6066 HD 597 S1CORR 1
CORRIGENDUM Coupling Capacitors and Capacitor Dividers 1992 CENELEC 0
6067 EN 61040 Power and Energy Measuring Detectors, Instruments and Equipment for Laser Radiation 1992 CENELEC 06068 HD 597 S1 Coupling Capacitors and Capacitor Dividers 1992 CENELEC 06069 EN 123300 Sectional Specification: Multilayer Printed Boards - Incorporates Amendment A1: 1995 1992 CENELEC 06070 HD 593.3 S1 CORRIGENDUM Microprocessor System BUS I, 8-Bit and 16-Bit Data Part 3: Mechanical and Pin Descriptions for the
Eurocard Configuration with Pin and Socket (Indirect) Connectors1992 CENELEC 0
6071 EN 135000 Generic Specification: Travelling Wave Amplifier Tubes 1992 CENELEC 06072 EN 50066 Mini-Couplers for the Interconnection of Electrical Mains Supplied Equipment in Road Vehicles 1992 CENELEC 06073 EN 60061-4 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general
information - Incorporates Amendment A14: 20111992 CENELEC 0
6074 EN 60835-1-1 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 1: MeasurementsCommon to Terrestrial Radio-Relay Systems and Satellite Earth Stations Section One: General
1992 CENELEC 0
6075 HD 400.3R S1 Hand-Held Motor Operated Tools Part 3: Particular Specifications Section R: Trimmers 1992 CENELEC 06076 HD 555.18 S2 Specifications for Particular Types of Winding Wires Part 18: Polyvinyl Acetal Enamelled Rectangular Copper Wire, Class
1201992 CENELEC 0
6077 HD 21.1 S2/ A7 AMD 7 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 1: GeneralRequirements
1992 CENELEC 0
6078 HD 600 S1 Marine Speed and Distance Measuring Equipment (SDME) - Operational and Performance Requirements Methods ofTesting and Required Test Results
1992 CENELEC 0
6079 HD 598 S1 Test Methods for Direct Arc Furnaces 1992 CENELEC 06080 EN 50094 Access Control System for the MAC/Packet Family: EUROCRYPT - Incorporates Amendment A1: 1995 1992 CENELEC 06081 EN 136002 Blank Detail Specification: C.W. Magnetrons for RF Heating or Cooking Applications 1992 CENELEC 0
6082 HD 53.14 S1 Rotating Electrical Machines Part 14: Mechanical Vibration of Certain Machines with Shaft Heights 56 mm and Higher -Measurement, Evaluation and Limits of the Vibration Severity
1992 CENELEC 0
6083 EN 61044 Opportunity-Charging of Lead-Acid Traction Batteries 1992 CENELEC 06084 HD 53.12 S1/
A1AMD 1 Rotating Electrical Machines Part 12: Starting Performance of Single-Speed Three-Phase Cage Induction Motorsfor Voltages up to and Including 660 V, 50 Hz
1992 CENELEC 0
6085 HD 606.2 S1 Measurement of Smoke Density of Electric Cables Burning Under Defined Conditions Part 2: Test Procedure andRequirements
1992 CENELEC 0
6086 HD 283 S1 Safety of Household and Similar Electrical Appliances Particular Requirement for the Maximum Temperature Allowed forthe Surfaces of Air-Outlet Grilles of Thermal Storage Room Heating Appliances
1992 CENELEC 0
6087 HD 555.8 S2 Specifications for Particular Types of Winding Wires Part 8: Polyesterimide Enamelled Round Copper Wire, Class 180 1992 CENELEC 06088 EN 112000 Generic Specification: Image Converter and Image Intensifier Tubes 1992 CENELEC 06089 HD 555.30 S1 Specifications for Particular Types of Winding Wires Part 30: Polyimide Enamelled Rectangular Copper Wire, Class 220 1992 CENELEC 06090 HD 46.2.3 S1 Packaging of Winding Wires Part 2: Cylindrical Barrelled Delivery Spools Section 3: Specification for Non-Returnable
Spools Made from Thermoplastic Material1992 CENELEC 0
6091 EN 60933-3 Audio, Video and Audiovisual Systems Interconnections and Matching Values Part 3: Interface for the Interconnection ofENG Cameras and Portable VTRs Using Non-Composite Signals, for 625 Line/50 Field Systems
1992 CENELEC 0
6092 EN 120005 Blank Detail Specification: Photodiodes, Photodiode- Arrays (Not Intended for Fibre Optic Applications) 1992 CENELEC 06093 HD 22.2 S2/ A6 AMD 6 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 2: Test Methods 1992 CENELEC 06094 HD 395.2.17 S1 Medical Electrical Equipment Part 2: Particular Requirements for the Safety of Remote-Controlled Automatically-Driven
Gamma-Ray Afterloading Equipment1992 CENELEC 0
6095 EN 61100 Classification of Insulating Liquids According to Fire Point and Net Calorific Value 1992 CENELEC 06096 HD 555.20 S2 Specifications for Particular Types of Winding Wires Part 20: Solderable Polyurethane Enamelled Round Copper Wire,
Class 1551992 CENELEC 0
6097 HD 555.26 S2 Specifications for Particular Types of Winding Wires Part 26: Polyamide-Imide Enamelled Round Copper Wire, Class 200 1992 CENELEC 06098 HD 367 S2 On-Load Tap-Changers 1992 CENELEC 06099 HD 505.4.2 S1 Common Test Methods for Insulating and Sheathing Materials of Electric Cables Part 4: Methods Specific to Polyethylene
and Polypropylene Compounds Section Two - Elongation at Break After Pre-Conditioning - Wrapping Test After ThermalAgeing in Air - Measu
1992 CENELEC 0
6100 EN 123500-800 Capability Detail Specification: Flexible Printed Boards with Through Connections 1992 CENELEC 06101 HD 555.13 S2 Specifications for Particular Types of Winding Wires Part 13: Polyester or Polyesterimide Overcoated with Polyamide-
Imide Enamelled Round Copper Wire, Class 2001992 CENELEC 0
6102 HD 555.0.2 S1 Specifications for Particular Types of Winding Wires Part 0: General Requirements Section 2: Enamelled RectangularCopper Wire
1992 CENELEC 0
6103 HD 555.0.4 S1 Specifications for Particular Types of Winding Wires Part 0: General Requirements Section 4: Glass-Fibre Wound Bare orEnamelled Rectangular Copper Wire
1992 CENELEC 0
6104 R105-001 Home and building electronic systems Technical report 1 Applications and requirements - Class 1 1992 CENELEC 06105 HD 555.25 S2 Specifications for Particular Types of Winding Wires Part 25: Polyester or Polyesterimide Overcoated with Polyamide-
Imide Enamelled Round Aluminium Wire, Class 2001992 CENELEC 0
6106 HD 555.0.1 S1 Specifications for Particular Types of Winding Wires Part 0: General Requirements Section 1 - Enamelled Round CopperWire
1992 CENELEC 0
6107 EN 50089 Cast Resin Partitions for Metal Enclosed Gas-Filled High Voltage Switchgear and Controlgear 1992 CENELEC 06108 EN 60994 Guide for Field Measurement of Vibrations and Pulsations in Hydraulic Machines (Turbines, Storage Pumps and Pump-
Turbines)1992 CENELEC 0
6109 HD 498 S2 Flickermeter - Functional and Design Specifications 1992 CENELEC 06110 EN 168101 Blank Detail Specification: Quartz Crystal Units (Capability Approval) 1992 CENELEC 06111 HD 555.27 S2 Specifications for Particular Types of Winding Wires Part 27: Paper Covered Rectangular Copper Wire 1992 CENELEC 0
6112 HD 483.15 S4 Sound System Equipment Part 15: Preferred Matching Values for the Interconnection of Sound System Components 1992 CENELEC 06113 HD 555.32 S1 Specifications for Particular Types of Winding Wires Part 32: Glass-Fibre Wound, Polyester or Polyesterimide Varnish-
Treated, Bare or Enamelled Rectangular Copper Wire, Temperature Index 1551992 CENELEC 0
6114 HD 22.3 S2 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 3: Heat Resistant Silicone Rubber InsulatedCables (Reprint Incorporating A1)
1992 CENELEC 0
6115 HD 555.7 S2 Specifications for Particular Types of Winding Wires Part 7: Polyimide Enamelled Round Copper Wire, Class 220 1992 CENELEC 06116 EN 60343 Recommended Test Methods for Determining the Relative Resistance of Insulating Materials to Breakdown by Surface
Discharges1992 CENELEC 0
6117 HD 560.3 S1 Methods of Measurement on Radio Receivers for Various Classes of Emission Part 3: Receivers for Amplitude-ModulatedSound-Broadcasting Emissions
1992 CENELEC 0
6118 EN 175100 Sectional Specification: Two Part and Edge Socket Connectors for Printed Board Application 1992 CENELEC 06119 HD 505.5.1 S1 Common Test Methods for Insulating and Sheathing Materials of Electric Cables Part 5: Methods Specific to Filling
Compounds Section One: Drop-Point - Separation of Oil Lower Temperature Brittleness - Total Acid Number Absence ofCorrosive Components - Per
1992 CENELEC 0
6120 HD 444.2.2 S2 Fire Hazard Testing Part 2: Test Methods Section 2 - Needle- Flame Test 1992 CENELEC 06121 EN 61110 System Omega and Differential Omega Receivers for Ships - Operational and Performance Requirements Methods of
Testing and Required Test Results1992 CENELEC 0
6122 HD 187 S5 A.C. Metal-Enclosed Switchgear and Control Gear for Rated Voltages Above 1 kV and up to and Including 52 kV 1992 CENELEC 06123 HD 358 S3 Gas-Insulated Metal- Enclosed Switchgear for Rated Voltages of 72.5 kV and Above 1992 CENELEC 06124 EN 141101 Blank Detail Specification: Lead-Screw Actuated and Rotary Preset Potentiometers 1992 CENELEC 06125 HD 555.11 S1 Specifications for Particular Types of Winding Wires Part 11: Bunched Solderable Polyurethane Enamelled Round Copper
Wires, Class 130, with Silk Covering1992 CENELEC 0
6126 HD 400.3O S1 Hand-Held Motor Operated Tools Part II: Particular Specifications Section O: Routers 1992 CENELEC 06127 HD 395.2.19 S1 Medical Electrical Equipment Part 2: Particular Requirements for Safety of Baby Incubators 1992 CENELEC 06128 HD 525.1 S1 Shunt Capacitors for a.c. Power Systems Having a Rated Voltage Above 660 V Part 1: General Performance, Testing and
Rating Safety Requirements - Guide for Installation and Operation1992 CENELEC 0
6129 HD 555.2 S2 Specifications for Particular Types of Winding Wires Part 2: Solderable Polyurethane Enamelled Round Copper Wire,Class 130, with a Bonding Layer
1992 CENELEC 0
6130 HD 22.2 S2/ A5 AMD 5 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 2: Test Methods 1992 CENELEC 06131 HD 555.21 S2 Specifications for Particular Types of Winding Wires Part 21: Solderable Polyurethane Enamelled Round Copper Wire
Overcoated with Polyamide, Class 1551992 CENELEC 0
6132 HD 611.3.1 S1 Guide for the Determination of Thermal Endurance Properties of Electrical Insulating Materials Part 3: Instructions forCalculating Thermal Endurance Characteristics Section One: Calculations Using Mean Values of Normally DistributedComplete Data
1992 CENELEC 0
6133 EN 60835-3-1 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 3: Measurements onSatellite Earth Stations Section 3.1 General
1992 CENELEC 0
6134 HD 578 S1 Characteristics of Indoor and Outdoor Post Insulators for Systems with Nominal Voltages Greater Than 1000 V 1992 CENELEC 06135 EN 168201 Blank Detail Specification: Quartz Crystal Units (Qualification Approval) 1992 CENELEC 06136 HD 384.2 S1/
A1AMD 1 International Electrotechnical Vocabulary (IEV) Chapter 826: Electrical Installations of Buildings 1992 CENELEC 0
6137 EN 60870-5-3 Telecontrol Equipment and Systems Part 5: Transmission Protocols Section 3: General Structure of Application Data 1992 CENELEC 06138 HD 555.15 S2 Specifications for Particular Types of Winding Wires Part 15: Polyesterimide Enamelled Round Aluminium Wire, Class
1801992 CENELEC 0
6139 HD 22.1 S2/A12
AMD 12 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 1: General Requirements 1992 CENELEC 0
6140 HD 323.2.33 S1 Basic Environmental Testing Procedures Part 2: Tests Guidance on Change of Temperature Tests 1992 CENELEC 0
6141 HD 478.2.6 S1 Classification of Environmental Conditions Part 2: Environmental Conditions Appearing in Nature Earthquake Vibrationand Shock
1992 CENELEC 0
6142 EN 60107-5 Recommended Methods of Measurement on Receivers for Television Broadcast Transmissions Part 5: ElectricalMeasurements on Multichannel Sound Television Receivers Using the NICAM Two-Channel Digital Sound-System -Incorporates Amendment A1: 1999
1992 CENELEC 0
6143 EN 61104 Compact Disc Video System - 12 cm CD-V 1992 CENELEC 06144 HD 22.1 S2/
A11AMD 11 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 1: General Requirements 1992 CENELEC 0
6145 HD 22.2 S2/ A7 AMD 7 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 2: Test Methods 1992 CENELEC 06146 HD 602 S1 Test on Gases Evolved During Combustion of Materials from Cables Determination of Degree of Acidity (Corrosivity) of
Gases by Measuring pH and Conductivity1992 CENELEC 0
6147 HD 22.8 S1 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V - Part 8: Polychloroprene or EquivalentSynthetic Elastomer Sheathed Cables for Use as Decorative Chains (Reprint Incorporating A1)
1992 CENELEC 0
6148 EN 123100 Sectional Specification: Single and Double Sided Printed Boards with Plain Holes 1992 CENELEC 06149 HD 611.1 S1 Guide for the Determination of Thermal Endurance Properties of Electrical Insulating Materials Part 1: General Guidelines
for Ageing Procedures and Evaluation of Test Results1992 CENELEC 0
6150 HD 323.2.57 S1 Basic Environmental Testing Procedures Part 2: Tests Test Ff: Vibration - Time-History Method 1992 CENELEC 06151 EN 125100 Sectional Specification: Magnetic Oxide Cores for Inductor Applications 1991 CENELEC 06152 HD 582 S1 Specification for Unused Polybutylenes 1991 CENELEC 06153 HD 142 S3 Terms and Definitions for Printed Circuits 1991 CENELEC 06154 EN 50069 Welded composite enclosures of cast and wrought aluminium alloys for gas-filled high-voltage switchgear and controlgear
- Incorporates Amendment A1: 1993; Incorporating Corrigendum August 20071991 CENELEC 0
6155 HD 323.5.2 S1 Environmental Testing Part 5: Guide to Drafting of Test Methods Terms and Definitions 1991 CENELEC 06156 HD 323.1 S2 Environmental Testing Part 1: General and Guidance 1991 CENELEC 06157 HD 594 S1 Self-Ballasted Lamps for General Lighting Services - Performance Requirements 1991 CENELEC 06158 EN 60529 Degrees of Protection Provided by Enclosures (IP Code) - Incorporates Amendments A1: 2000 and A2: 2013 1991 CENELEC 06159 EN 114001 Blank Detail Specification: Photomultiplier Tubes 1991 CENELEC 06160 HD 559.2 S1 Methods of Test for Electric Strength of Solid Insulating Materials - Part 2: Additional Requirements for Tests Using
Direct Voltage1991 CENELEC 0
6161 HD 323.2.59 S1 Basic Environmental Testing Procedures Part 2: Tests Test Fe: Vibration - Sine Beat Method 1991 CENELEC 06162 HD 21.5 S2/ A4 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 5: Flexible Cables (Cords) 1991 CENELEC 06163 HD 583 S1 Medical Electrical Equipment Medical Electron Accelerators Functional Performance Characteristics 1991 CENELEC 06164 HD 307.3.5 S1 Specification for Solventless Polymerisable Resinous Compounds Used for Electrical Insulation Part 3: Specifications for
Individual Materials Sheet 5: Unsaturated Polyester Impregnating Resins1991 CENELEC 0
6165 HD 537 S1 Test Requirements for the Evaluation of the Emission of Ionized Gases During Short- Circuit Tests of Residual CurrentOperated Circuit- Breakers with Integrated Overcurrent Protection for Household and Similar Use
1991 CENELEC 0
6166 HD 400.2E/A1 AMD 1 Hand-Held Motor Operated Tools Part II: Particular Specifications Section E: Circular Saws and Circular Knives 1991 CENELEC 06167 HD 483.15 S3 Sound System Equipment Part 15: Preferred Matching Values for the Interconnection of Sound System Components 1991 CENELEC 06168 HD 251 S3/ A2
+ ANNEXEAMD 2 + Annexe Safety of Household and Similar Electrical Appliances: General Requirements 1991 CENELEC 0
6169 EN 113000 Generic Specification: Camera Tubes 1991 CENELEC 06170 EN 123000 Generic Specification: Printed Boards - Incorporates Amendments A1: 1995 and A2: 1996 1991 CENELEC 06171 HD 505.1.3 S2 Common Test Methods for Insulating and Sheathing Materials of Electric Cables Part 1: Methods for General Application
Section Three - Methods for Determining the Density Water Absorption Tests - Shrinkage Test1991 CENELEC 0
6172 HD 313.2.9 S3 Base Materials for Printed Circuits Part 2: Specifications Specification No. 9: Epoxide Cellulose Paper Core, EpoxideGlass Cloth Surfaces Copper- Clad Laminated Sheet of Defined Flammability (Vertical Burning Test)
1991 CENELEC 0
6173 HD 533 S1 Short-Circuit Current Calculation in Three- Phase a.c. Systems 1991 CENELEC 06174 HD 236.12.1 S1 Methods of Measurement for Radio Transmitters Part 12: Guideline for Drawing up Descriptive Leaflets for Transmitters
and Transposers for Sound and Television Broadcasting Characteristics to be Specified1991 CENELEC 0
6175 HD 546.3 S1 Telecontrol Equipment and Systems Part 3: Interfaces (Electrical Characteristics) 1991 CENELEC 06176 HD 201/1 S1 Alkaline Secondary Cells and Batteries Sealed Nickel-Cadmium Cylindrical Rechargeable Single Cells for Permanent
Charge at Elevated Temperatures1991 CENELEC 0
6177 HD 525.2 S1/A1
AMD 1 Shunt Capacitors for A.C. Power Systems Having a Rated Voltage Above 660V Part 2: Endurance Testing 1991 CENELEC 0
6178 HD 588 S1 High-Voltage Test Techniques Part 1: General Definitions and Test Requirements 1991 CENELEC 06179 EN 143001 Blank Detail Specification: Directly Heated Negative Temperature Coefficient Thermistors (Beads in Solid Glass of
Vitreous Enamel)1991 CENELEC 0
6180 HD 559.1 S1 Methods of Test for Electric Strength of Solid Insulating Materials Part 1: Tests at Power Frequencies 1991 CENELEC 06181 HD 551 S1 Shipborne Radar - Operational and Performance Requirements - Methods of Test and Required Test Results 1991 CENELEC 06182 EN 111000 Generic Specification: Cathode Ray Tubes 1991 CENELEC 06183 EN 114000 Generic Specification: Photomultiplier Tubes 1991 CENELEC 06184 EN 125401 Blank Detail Specification: Adjusters Used with Magnetic Oxide (Ferrite) Cores for Use in Inductors and Tuned
Transformers1991 CENELEC 0
6185 EN 61077 Helical-Scan Video Tape Cassette System Using 12,65 mm (O,5 in) Magnetic Tape on Type VHS Compact VHS Cassette 1991 CENELEC 06186 HD 21.1 S2/ A6 AMD 6 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 1: General
Requirements1991 CENELEC 0
6187 EN 116200 Sectional Specification: Electromechanical All-Or-Nothing Relays (Including Relays for Severe EnvironmentalConditions)
1991 CENELEC 0
6188 HD 539 S1 Reactors 1991 CENELEC 06189 HD 334 S3 Marking Codes for Resistors and Capacitors 1991 CENELEC 06190 HD 327 S2/ A1 AMD 1 Safety Requirements for Electronic Flash Apparatus for Photographic Purposes 1991 CENELEC 06191 HD 201 S2 Sealed Nickel-Cadmium Cylindrical Rechargeable Single Cells 1991 CENELEC 06192 HD 53.16.1 S1 Rotating Electrical Machines Part 16: Excitation Systems for Synchronous Machines Chapter 1: Definitions 1991 CENELEC 06193 EN 112001 Blank Detail Specification: Image Converter and Image Intensifier Tubes 1991 CENELEC 06194 EN 60735 Measuring Methods for Video Tape Properties 1991 CENELEC 06195 EN 111001 Blank Detail Specification: Cathode Ray Tubes 1991 CENELEC 06196 HD 56 S2 Definitions and Nomenclature for Carbon Brushes, Brush-Holders, Commutators and Slip- Rings 1991 CENELEC 06197 HD 491.9 S1 Safety in Electroheat Installations Part 9: Particular Requirements for High-Frequency Dielectric Heating Installations 1991 CENELEC 06198 HD 323.2.32 S2 Basic Environmental Testing Procedures Part 2: Tests Test ed: Free Fall 1991 CENELEC 06199 HD 505.1.2 S2 Common Test Methods for Insulating and Sheathing Materials of Electric Cables Part 1: Methods for General Application
Section Two - Thermal Ageing Methods1991 CENELEC 0
6200 HD 540.3 S1 Insulation Co-Ordination Part 3: Phase-to-Phase Insulation Co-Ordination Principles, Rules and Application Guide 1991 CENELEC 06201 HD 278 S1/ A6 AMD 6 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Room Heaters; 1991 CENELEC 06202 EN 50080 RF Characteristics of MAC AM-VSB Cable Receivers 1991 CENELEC 06203 HD 541 S1 Methods of Test for the Determination of the Ignitability of Solid Electrical Insulating Materials When Exposed to
Electrically Heated Wire Sources1991 CENELEC 0
6204 HD 543.1 S1 Performance and Testing of Teleprotection Equipment of Power Systems Part 1: Narrow- Band Command Systems 1991 CENELEC 06205 HD 355.1 S2 High-Voltage Switches Part 1: High-Voltage Switches for Rated Voltages Above 1kv and Less Than 52 kv 1991 CENELEC 0
6206 HD 245.3 S2 Letter Symbols to Be Used in Electrical Technology Part 3: Logarithmic Quantities and Units 1991 CENELEC 06207 HD 400.2E S2
/A1AMD 1 Hand-Held Motor Operated Tools Part II: Particular Specifications Section E: Circular Saws and Circular Knives 1991 CENELEC 0
6208 EN 111100 Sectional Specification: Display Storage Tubes 1991 CENELEC 06209 HD 490.5 S2 Methods of Test for Winding Wires Part 5: Electrical Properties 1991 CENELEC 06210 HD 400.2D/A1 AMD 1 Hand-Held Motor Operated Tools Part II: Particular Specifications (Section D) 1991 CENELEC 06211 EN 113001 Blank Detail Specification: Camera Tubes 1991 CENELEC 06212 HD 584 S1 Method for Measuring the Felting Severity of the Wool Wash Programme of Electric Clothes Washing Machines for
Household Use1991 CENELEC 0
6213 HD 53.3 S1 Rotating Electrical Machines Part 3: Specific Requirements for Turbine-Type Synchronous Machines 1991 CENELEC 06214 EN 125400 Sectional Specification: Adjusters Used with Magnetic Oxide Cores for Use in Inductors and Tuned Transformers 1991 CENELEC 06215 EN 50068 Wrought Steel Enclosures for Gas-Filled High- Voltage Switchgear and Controlgear 1991 CENELEC 06216 HD 243 S9 Graphical Symbols for Use on Equipment - Index, Survey and Compilation of the Single Sheets 1991 CENELEC 06217 HD 483.11 S2 Sound System Equipment Part 11: Application of Connectors for the Interconnection of Sound System Components 1991 CENELEC 06218 EN 143004 Blank Detail Specification: Directly Heated Negative Temperature Coefficient Thermistors (Rod Type) 1991 CENELEC 06219 HD 558 S1 Economic Optimisation of Power Cable Size 1991 CENELEC 06220 EN 111101 Blank Detail Specification: Display Storage Tubes 1991 CENELEC 06221 HD 323.3.3 S1 Environmental Testing Part 3: Guidance - Seismic Test Methods for Equipments 1991 CENELEC 06222 HD 355.2 S2 High-Voltage Switches Part 2: High-Voltage Switches for Rated Voltages of 52 kV and Above 1991 CENELEC 06223 HD 585 S1 Electrolyte for Vented Nickel-Cadmium Cells 1991 CENELEC 06224 HD 540.2 S1 Insulation Co-Ordination Part 2: Application Guide 1991 CENELEC 06225 HD 400.2C/A1 AMD 1 Hand-Held Motor Operated Tools Part II: Particular Specifications (Section C) 1991 CENELEC 06226 HD 369.10 S4 Audiovisual, Video and Television Equipment and Systems Part 10: Audio Cassette Systems 1991 CENELEC 06227 EN 125200 Sectional Specification: Magnetic Oxide Cores for Linear Transformers 1991 CENELEC 06228 EN 143002 Blank Detail Specification: Directly Heated Negative Temperature Coefficient Thermistors (Beads in Envelopes) 1991 CENELEC 06229 EN 117000 Generic Specification: Solid State All-Or-Nothing Relays of Assessed Quality. Generic Data and Methods of Test 1991 CENELEC 06230 EN 100014 Basic Specification: CECC Assessed Process Average Process Average Procedure (60% Confidence Limit) 1991 CENELEC 06231 HD 581 S1 Application Guide for Calculation of Short- Circuit Currents in Low-Voltage Radial Systems 1991 CENELEC 06232 HD 236.12.2 S1 Methods of Measurements for Radio Transmitters Part 12: Guideline for Drawing up Descriptive Leaflets for Transmitters
and Transposers for Sound and Television Broadcasting Specification Sheets1991 CENELEC 0
6233 HD 536 S1 Test Requirements for the Evaluation of the Emission of Ionized Gases During Short- Circuit Tests of Residual CurrentOperated Circuit- Breakers for Household and Similar Use
1991 CENELEC 0
6234 HD 505.1.1 S3 Common Test Methods for Insulating and Sheathing Materials of Electric Cables Part 1: Methods for General ApplicationSection One - Measurement of Thickness and Overall Dimensions - Tests for Determining the Mechanical Properties
1991 CENELEC 0
6235 EN 143003 Blank Detail Specification: Directly Heated Negative Temperature Coefficient Thermistors (Disk Type) 1991 CENELEC 06236 HD 546.2.1 S1 Telecontrol Equipment and Systems Part 2: Operating Conditions Section One - Environmental Conditions and Power
Supplies1991 CENELEC 0
6237 HD 53.15 S1 Rotating Electrical Machines Part 15: Impulse Voltage Withstand Levels of Rotating A.C. Machines with Form-WoundStator Coils
1991 CENELEC 0
6238 HD 109.2 S1 Miniature Fuses Part 2: Cartridge Fuse-Links 1990 CENELEC 06239 HD 428/A1 AMD 1 Three-Phase Oil-Immersed Public Distribution Transformers, 50 Hz, from 50 to 2500 kVA, with Highest Voltage
for Equipment Not Exceeding 24 kV1990 CENELEC 0
6240 HD 313.2.3 S2 Base Materials for Printed Circuits Part 2: Specifications Specification No.3: Epoxide Cellulose Paper Copper-CladLaminated Sheet of Defined Flammability (Vertical Burning Test)
1990 CENELEC 0
6241 HD 491.3 S1 Safety in Electroheat Installations Part 3: Particular Requirements for Induction and Conduction Heating and InductionMelting Installations
1990 CENELEC 0
6242 HD 568 S1 Methods of Test for the Determination of the Insulation Resistance of Solid Insulating Materials 1990 CENELEC 06243 HD 46.3.1 S1 Packaging of Winding Wires Part 3: Taper Barrelled Delivery Spools Section One - Basic Dimensions 1990 CENELEC 06244 HD 505.4.1 S2 Common Test Methods- Insulating/Sheathing Materials Electric Cables Part 4: Methods Polyethylene/ Polypropylene
Compounds Sec 1-Resistance Environmental Stress- Cracking/Wrapping Test After Thermal Ageing in Air-Measurementof Melt Flow Index-Carbon Black
1990 CENELEC 0
6245 HD 555.23 S1 Specifications for Particular Types of Winding Wires Part 23: Solderable Polyester (Imide) Enamelled Round CopperWinding Wire, Class 180
1990 CENELEC 0
6246 HD 571 S1 General Principles for the Creation of Graphical Symbols for Use on Equipment 1990 CENELEC 06247 HD 555.13 S1 Specifications for Particular Types of Winding Wires Part 13: Polyester (imide) Overcoated with Polyamide-Imide,
Enamelled Round Copper Winding Wire, Class 2001990 CENELEC 0
6248 EN 60465 Specification for Unused Insulating Mineral Oils For Cables with Oil Ducts 1990 CENELEC 06249 HD 555.15 S1 Specifications for Particular Types of Winding Wires Part 15: Polyesterimide Enamelled Round Aluminium Winding Wire,
class 1801990 CENELEC 0
6250 HD 1003 Heating in Contact with the Front of the Domestic Cooking Appliances Burning Gas 1990 CENELEC 06251 EN 60335-2-33 Safety of Household and Similar Electrical Appliances Part 2: Particular Requirements for Coffee Mills and Coffee
Grinders1990 CENELEC 0
6252 HD 490.3 S2 Methods of Test for Winding Wires Part 3: Mechanical Properties 1990 CENELEC 06253 HD 555.27 S1 Specification for Particular Types of Winding Wires Part 27: Paper Covered Rectangular Copper Winding Wire 1990 CENELEC 06254 HD 287 S1/ A1 AMD 1 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Commercial Electric
Multi-Purpose Cooking Pans1990 CENELEC 0
6255 HD 478.2.7 S1 Classification of Environmental Conditions Part 2: Environmental Conditions Appearing in Nature - Fauna and Flora 1990 CENELEC 06256 HD 523.3.403
TO 405 S1Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheets403 to 405: Glass Textile Sleeving with Acrylic Based Coating
1990 CENELEC 0
6257 HD 523.3.121.122 S1
Specification for Flexible Insulating Sleeving Part 3: Specification Requirement for Individual Types of Sleeving Sheets121 and 122: Extruded Silicone Sleevings
1990 CENELEC 0
6258 HD 280.3 S1 Safety Requirements for Electric Fans and Regulators Part 3: Jet Fans 1990 CENELEC 06259 EN 50075 Flat Non-Wirable Two-Pole Plugs, 2,5 A 250 V, with Cord, for the Connection of Class II-Equipment for Household and
Similar Purposes1990 CENELEC 0
6260 HD 313.2.14 S1 Base Materials for Printed Circuits Part 2: Specifications Specification No 14: Phenolic Cellulose Paper Copper-CladLaminated Sheet of Defined Flammability (Vertical Turning Test) Economic Quality
1990 CENELEC 0
6261 HD 564 S1 Nominal Dimensions of Cylindrical Machined Graphite Electrodes with Threaded Sockets and Nipples for Use in ElectricArc Furnaces
1990 CENELEC 0
6262 HD 21.1 S2/ A5 AMD 5 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 1: GeneralRequirements
1990 CENELEC 0
6263 HD 280.2 S1 Safety Requirements for Electric Fans and Regulators Part 2: Fans and Regulators for Use in Ships 1990 CENELEC 06264 HD 483.12 S1 Sound System Equipment Part 12: Application of Connectors for Broadcast and Similar Use 1990 CENELEC 06265 HD 492.1 S2/
A1AMD 1 High-Voltage Fuses Part 1: Current Limiting Fuses 1990 CENELEC 0
6266 HD 505.1.1 S2 Common Test Methods for Insulating and Sheathing Materials of Electric Cables Part 1: Methods for General ApplicationSection One - Measurement of Thickness and Overall Dimensions - Tests for Determining the Mechanical Properties
1990 CENELEC 0
6267 HD 483.3 S1 Sound System Equipment Part 3: Amplifiers 1990 CENELEC 06268 HD 573 Type C Helical Video Tape Recorders 1990 CENELEC 06269 HD 313.2.2 S2 Base Materials for Printed Circuits Part 2: Specifications Specification No.2: Phenolic Cellulose Paper Copper-Clad
Laminated Sheet, Economic Quality1990 CENELEC 0
6270 HD 313.2.12 S2 Base Materials for Printed Circuits Part 2: Specifications Specification No. 12: Thin Epoxide Woven Glass Fabric Copper-Clad Laminated Sheet of Defined Flammability, for Use in the Fabrication of Multilayer Printed Boards
1990 CENELEC 0
6271 HD 219 S3 Law Pressure Sodium Vapour Lamps 1990 CENELEC 06272 HD 109.1 S1 Miniature Fuses Part 1: Definitions for Miniature Fuses and General Requirements for Miniature Fuse-Links 1990 CENELEC 06273 HD 555.2 S1 Specifications for Particular Types of Winding Wires Part 2: Solderable Polyurethane Enamelled Round Copper Winding
Wire, Class 130, with a Bonding Layer1990 CENELEC 0
6274 HD 547 S1 Conductive Clothing for Live Working at a Nominal Voltage up to 800 KV a.c. 1990 CENELEC 06275 HD 580 S1 Synthetic Testing of High-Voltage Alternating Current Circuit-Breakers 1990 CENELEC 06276 HD 313.2.10 S3 Base Materials for Printed Circuits Part 2: Specifications Specification No. 10: Epoxide Non-Woven/Woven Glass
Reinforced Copper- Clad Laminated Sheet of Defined Flammability (Vertical Burning Test)1990 CENELEC 0
6277 HD 21.7 S1 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750V Part 7: Single Core Non-SheathedCables for Internal Wiring for a Conductor Temperature of 90 Degrees Celsius
1990 CENELEC 0
6278 HD 21.8 S1 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Single Core Non-Sheathed Cable forDecorative Chains
1990 CENELEC 0
6279 HD 313.2.1 S2 Base Materials for Printed Circuits Part 2: Specifications Specification No 1 : Phenolic Cellulose Paper Copper-CladLaminated Sheet High Electrical Quality
1990 CENELEC 0
6280 HD 313.2.4 S2 Base Materials for Printed Circuits Part 2: Specifications Specification No.4: Epoxide Woven Glass Fabric Copper-CladLaminated Sheet, General Purpose Grade
1990 CENELEC 0
6281 HD 555.8 S1 Specifications for Particular Types of Winding Wires Part 8: Polyesterimide Enamelled Round Copper Winding Wire,Class 180
1990 CENELEC 0
6282 HD 555.1 S1 Specifications for Particular Types of Winding Wires Part 1: Polyvinyl Acetal Enamelled Round Copper Winding Wire,Class 105
1990 CENELEC 0
6283 HD 313.2.9 S2 Base Materials for Printed Circuits Part 2: Specifications Specification No.9: Epoxide Cellulose Paper Core, Epoxide GlassCloth Surfaces Copper- Clad Laminated Sheet of Defined Flammability (Vertical Burning Test)
1990 CENELEC 0
6284 HD 274 S2 Safety of Household and Similar Electrical Appliances Requirements for the Connection of Washing Machines,Dishwashers and Tumble Dryers to the Water Supply Mains
1990 CENELEC 0
6285 HD 483.5 S1 Sound System Equipment Part 5: Loudspeakers 1990 CENELEC 06286 HD 138 S2 Sealing Test for Professional Waveguide Tubing and Assemblies 1990 CENELEC 06287 HD 313.2.11 S2 Base Materials for Printed Circuits Part 2: Specifications Specification No. 11: Thin Epoxide Woven Glass Fabric Copper-
Clad Laminated Sheet, General Purpose Grade, for Use in the Fabrication of Multilayer Printed Boards1990 CENELEC 0
6288 HD 542 S1 Insulating Poles (Insulating Sticks) and Universal Tool Attachments (Fittings) for Live Working 1990 CENELEC 06289 HD 483.15 S2 Sound System Equipment Part 15: Preferred Matching Values for the Interconnection of Sound System Components 1990 CENELEC 06290 HD 555.22 S1 Specifications for Particular Types of Winding Wires Part 22: Polyester (Imide) Enamelled Round Copper Winding Wire
Overcoated with Polyamide, Class 1801990 CENELEC 0
6291 HD 555.25 S1 Specifications for Particular Types of Winding Wires Part 25: Polyester (Imide) Overcoated with Polyamide- ImideEnamelled Round Aluminium Winding Wire, Class 200
1990 CENELEC 0
6292 EN 60182-2 Basic Dimensions of Winding Wires Part 2: Maximum Overall Diameters of Enamelled Round Winding Wires 1990 CENELEC 06293 HD 323.2.56 S1 Basic Environmental Testing Procedures Part 2: Tests Test Cb; Damp Heat, Steady State, Primarily for Equipment 1990 CENELEC 06294 HD 21.1 S2 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 1: General Requirements 1990 CENELEC 06295 HD 284 S1/ A1 AMD 1 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Commercial Electric
Ranges, Ovens and Hob Elements1990 CENELEC 0
6296 HD 467.2.3 S1 Methods of Measurement for Radio Equipment Used in Satellite Earth Stations Part 2: Measurements for Sub- SystemsSection Three - Low-Noise Amplifier
1990 CENELEC 0
6297 HD 576 S1 Parallel Sub-System Bus of the IEC 821 VME Bus 1990 CENELEC 06298 HD 278 S1/ A3 AMD 3 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Room Heater; 1990 CENELEC 0
6299 HD 555.18 S1 Specifications for Particular Types of Winding Wires Part 18: Polyvinyl Acetal Enamelled Rectangular Copper WindingWire, Class 120
1990 CENELEC 0
6300 HD 423.2.3S1/A1
AMD 1 Test Code for the Determination by Airborne Acoustical Noise Emitted by Household and Similar ElectricalAppliances Part 2: Particular Requirements for Dishwashers
1990 CENELEC 0
6301 HD 21.5 S2 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 v Part 5: Flexible Cables (Cords) 1990 CENELEC 06302 HD 483.11 S1 Sound System Equipment Part 11: Application of Connectors for the Interconnection of Sound System Components 1990 CENELEC 06303 HD 560.1 S1 Methods of Measurement on Radio Receivers for Various Classes of Emission Part 1: General Considerations and Methods
of Measurement, Including Audio- Frequency Measurements1990 CENELEC 0
6304 HD 555.20 S1 Specifications for Particular Types of Winding Wires Part 20: Solderable Polyurethene Enamelled Round Copper WindingWire, Class 155
1990 CENELEC 0
6305 HD 499 S1 Integrating-Averaging Sound Level Meters 1990 CENELEC 06306 HD 523.3.100
TO 105 S1Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheets100 to 105: Extruded PVC Sleeving
1990 CENELEC 0
6307 HD 555.14 S1 Specifications for Particular Types of Winding Wires Part 14: Polyvinyl Acetal Enamelled Round Aluminium WindingWire, Class 105
1990 CENELEC 0
6308 HD 408 S2 Alternating Current Disconnectors and Earthing Switches 1990 CENELEC 06309 HD 236.11 S1 Methods of Measurement for Radio Transmitters Part 11: Transposers for FM Sound Broadcasting 1990 CENELEC 06310 HD 567.6 S1 Recommended Methods of Measurement on Receivers for Television Broadcast Transmissions Part 6: Measurement Under
Conditions Different from Broadcast Signal Standards1990 CENELEC 0
6311 HD 555.12 S1 Specifications for Particular Types of Winding Wires Part 12: Polyvinyl Acetal Enamelled Round Copper Winding Wire,Class 120
1990 CENELEC 0
6312 HD 555.16 S1 Specifications for Particular Types of Winding Wires Part 16: Polyester Enamelled Rectangular Copper Winding Wire,Class 155
1990 CENELEC 0
6313 HD 555.19 S1 Specifications for Particular Types of Winding Wires Part 19: Solderable Polyurethane Enamelled Round Copper WindingWire Overcoated with Polyamide, Class 130
1990 CENELEC 0
6314 HD 555.21 S1 Specifications for Particular Types of Winding Wires Part 21: Solderable Polyurethane Enamelled Round Copper WindingWire Overcoated with Polyamide, Class 155
1990 CENELEC 0
6315 HD 446.2 S2 Thermocouples Part 2: Tolerances 1990 CENELEC 06316 HD 46.4.1 S1 Packaging of Winding Wires Part 4: Methods of Test Section One - Delivery Spools Made from Thermoplastic Material 1990 CENELEC 06317 HD 523.3.406
TO 408 S1Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheets406 to 408: Glass Textile Sleeving with PVC Based Coating
1990 CENELEC 0
6318 HD 460.3.1 S1 Packaging of Winding Wires Part 3: Taper Barrelled Delivery Spools Section One-Basic Dimensions 1990 CENELEC 06319 HD 278 S1/ A5 AMD 5 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Room Heaters; 1990 CENELEC 06320 HD 313.2.7 S2 Base Materials for Printed Circuits Part 2: Specifications Specification No.7 : Phenolic Cellulose Paper Copper-Clad
Laminated Sheet of Defined Flammability (Vertical Burning Test)1990 CENELEC 0
6321 HD 555.4 S1 Specifications for Particular Types of Winding Wires Part 4: Solderable Polyurethane Enamelled Round Copper WindingWire, Class 130
1990 CENELEC 0
6322 HD 577 Standardization of Interconnections Between Broadcasting Transmitters or Transmitter Systems and SupervisoryEquipment Part 1: Interface Standards for Systems Using Dedicated Interconnections
1990 CENELEC 0
6323 HD 262.4 S1 Particular Specification for Portable Immersion Heaters 1990 CENELEC 06324 HD 566 S1 Thermal Evaluation and Classification of Electrical Insulation 1990 CENELEC 06325 HD 555.26 S1 Specifications for Particular Types of Winding Wires Part 26: Polyamide-Imide Enamelled Round Copper Winding Wire,
Class 2001990 CENELEC 0
6326 HD 278 S1/ A4 AMD 4 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Room Heaters; 1990 CENELEC 06327 HD 555.7 S1 Specifications for Particular Types of Winding Wires Part 7: Polyimide Enamelled Round Copper Winding Wire, Class
2201990 CENELEC 0
6328 HD 307.3.11 S1 Specification for Solventless Polymerisable Resinous Compounds Used for Electrical Insulation Part 3: Specification forIndividual Materials Sheet 11: Epoxy Resin- Based Coating Powders
1990 CENELEC 0
6329 HD 313.2.5 S2 Base Materials for Printed Circuits Part 2: Specifications Specification No.5: Epoxide Woven Glass Fabric Copper-CladLaminated Sheet of Defined Flammability (Vertical Burning Test)
1990 CENELEC 0
6330 HD 555.24 S1 Specifications for Particular Types of Winding Wires Part 24: Polyester (Imide) Enamelled Round Aluminium WindingWire Overcoated with Polyamide, Class 180
1990 CENELEC 0
6331 HD 555.17 S1 Specifications for Particular Types of Winding Wires Part 17: Polyvinyl Acetal Enamelled Rectangular Copper WindingWire, Class 105
1990 CENELEC 0
6332 HD 313.2.10 S2 Base Materials for Printed Circuits Part 2: Specifications Specification No. 10: Epoxide Non-Woven Glass ReinforcedCopper-Clad Laminated Sheet of Defined Flammability (Vertical Burning Test)
1990 CENELEC 0
6333 HD 460.2.1 S1 Packaging of Winding Wires Part 2: Cylindrical Barrelled Delivery Spools Section One - Basic Dimensions 1990 CENELEC 06334 HD 282 S1 Safety of Household and Similar Electrical Appliances Part 2: Particular Requirements for Instantaneous Water Heaters 1990 CENELEC 06335 HD 574 S1 Type B Helical Video Recorders 1990 CENELEC 06336 HD 494 S2 Lamps for Road Vehicles Dimensional, Electrical and Luminous Requirements 1990 CENELEC 06337 HD 557 S1 Binary Direct Voltage Signals for Process Measurement and Control Systems 1990 CENELEC 06338 HD 323.2.17 S4 Basic Environmental Testing Procedures Part 2: Tests Test Q: Sealing 1990 CENELEC 06339 HD 46.2.1 S1 Packaging of Winding Wires Part 2: Cylindrical Barrelled Delivery Spools. Section One - Basic Dimensions 1990 CENELEC 06340 HD 369.14 S2 Audiovisual, Video and Television Equipment on Systems Part 14: Audio Striped Card System 1989 CENELEC 06341 HD 109.3 S1 Miniature Fuses Part 3: Sub-Miniature Fuse-Links 1989 CENELEC 06342 HD 395.2.15 S1 Medical Electrical Equipment Part 2: Particular Requirements for the Safety of Capacitor Discharge X- Ray Generators 1989 CENELEC 06343 HD 313.2.3 S1 Base Materials for Printed Circuits-Part 2: Specifications Specification No 3: Epoxide Cellulose Paper Copper-Clad
Laminated Sheet of Defined Flammability (Vertical Burning Test)1989 CENELEC 0
6344 HD 313.2.7 S1 Base Materials for Printed Circuits-Part 2: Specifications Specification No.7: Phenolic Cellulose Paper Copper-CladLaminated Sheet of Defined Flammability (Vertical Burning Test)
1989 CENELEC 0
6345 HD 523.3.209S1
Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving 1989 CENELEC 0
6346 HD 529 S1 Compact Disc Digital Audio System 1989 CENELEC 06347 HD 262.3 S1 Particular Specification for Portable Immersion Heaters 1989 CENELEC 06348 HD 523.2 S1 Specification for Flexible Insulating Sleeving-Part 2: Methods of Tests 1989 CENELEC 06349 HD 313.2.13 S1 Base Materials for Printer Circuits-Part 2: Specifications Specification No. 13: Flexible Copper-Clad Polyimide Film,
General Purpose Grade1989 CENELEC 0
6350 HD 550 S1 Mechanical Structures for Electronic Equipment - Terminology 1989 CENELEC 06351 HD 552 S1 Marine Navigational Equipment - General Requirements - Methods of Testing and Required Test Results 1989 CENELEC 06352 HD 186 S2 Marking by Inscription for the Identification of Cores of Electric Cables Having More Than 5 Cores 1989 CENELEC 06353 HD 369.18 S1 Audiovisual, Video and Television Equipment and Systems Part 18: Connectors for Automatic Slide Projectors with Built-
in Triacs for Audiovisual Application1989 CENELEC 0
6354 HD 423.2.3 S1 Test Code for the Determination of Airborne Acoustical Noise Emitted by Household and Similar Electrical AppliancesPart 2: Particular Requirements for Dishwashers
1989 CENELEC 0
6355 HD 53.1 S2/ A2 AMD 2 Rotating Electrical Machines - Part 1: Rating and Performance 1989 CENELEC 06356 HD 348 S3 High Voltage Alternating- Current Circuit-Breakers 1989 CENELEC 06357 HD 527 S1 Measuring Method for Chrominance Signal-to- Random Noise Ratio for Video Tape Recorders 1989 CENELEC 06358 EN 60051-3 Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories Part 3: Special Requirements
for Wattmeters and Varmeters - Incorporates Amendment A1: 19951989 CENELEC 0
6359 HD 512 S1 Measurement of the Conversion Factor of Electro-Optical X-Ray Intensifiers 1989 CENELEC 06360 HD 483.15 S1 Sound System Equipment- Part 15: Preferred Matching Valves for the Interconnection of Sound System Components 1989 CENELEC 0
6361 HD 352.3.1 S2 Specification for Insulating Materials Based on Mica-Part 3: Specifications for Individual Materials. Sheet One:Commutator Separators and Materials
1989 CENELEC 0
6362 HD 395.2.16 S1 Medical Electrical Equipment Part 2: Particular Requirements for the Safety of Heamodialysis Equipment 1989 CENELEC 06363 HD 416.2 S1 Specification for Vulcanized Flore for Electrical Purposes- Part 2: Methods of Test 1989 CENELEC 06364 HD 243 S8 Graphical Symbols for Use on Equipment. Index, Survey and Compilation of the Single Sheets 1989 CENELEC 06365 HD 525.2 S1 Shunt Capacitors for a.c. Power Systems Having a Rated Voltage Above 660v Part 2: Endurance Testing 1989 CENELEC 06366 EN 60598-2-7 Luminaires Part 2: Particular Requirements Section Seven - Portable Luminaires for Garden Use - Incorporates
Amendments A11: 1994, A12: 1995, A2: 1996 and A13: 1997; Incorporating Corrigendum January 1999; Remains Current1989 CENELEC 0
6367 HD 523.3.320S1
Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving 1989 CENELEC 0
6368 HD 400.3 S2 Hand Held Motor Operated Tools Part II: Particular Specifications Section L: Chain Saws 1989 CENELEC 06369 EN 60215 Safety Requirements for Radio Transmitting Equipment - Incorporates Amendments A1: 1992 and A2: 1994 1989 CENELEC 06370 EN 60051-9 Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories Part 9: Recommended Test
Methods1989 CENELEC 0
6371 HD 515 S1 Determination of the Image Distortion of Electro-Optical X-Ray Image Intensifiers 1989 CENELEC 06372 HD 506 S1 Bushings for Liquid Transformers Above 1kv up to 33kv 1989 CENELEC 06373 HD 278 S1/ A2 AMD 2 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Room Heaters; 1989 CENELEC 06374 HD 549 S1 Conference Systems - Electrical and Audio Requirements 1989 CENELEC 06375 HD 477.3.3 S1 Methods of Measurement for Equipment Used in Terrestrial Radio-Relay Systems Part 3: Simulated Systems Section Three
- Measurements for Monochrome and Colour Television Transmission1989 CENELEC 0
6376 HD 468 S1 Ionizing Radiation Measurement Systems with Analogue or Digital Signal Processing for Thickness Measurements 1989 CENELEC 06377 HD 95.3 S1 Aerials for the Reception of Sound and Television Broadcasting in the Frequency Range 30 MHz to 1 GHz-Part 3: Methods
of Measurement of Mechanical Properties, Vibration and Environmental Tests1989 CENELEC 0
6378 HD 53.8 S3/ A1 AMD 8 Rotating Electrical Machines - Part 8: Terminal Markings and Direction of Rotation of Rotating Machines 1989 CENELEC 06379 HD 307.3.4 S1 Specification for Solventless Polymerisable Resinous Compounds Used for Electrical Insulation Part 3: Specifications for
Individual Materials Sheet 4: Filled Polyurethane Compounds1989 CENELEC 0
6380 HD 313.2.5 S1 Base Materials for Printed Circuits-Part 2: Specifications Specification No.5: Epoxide Woven Glass Fabric Copper-Clad,Laminated Sheet of Defined Flammability (Vertical Burning Test)
1989 CENELEC 0
6381 HD 438 S1 Method of Test for Electrical Resistance and Resistivity of Insulating Materials at Elevated Temperatures 1989 CENELEC 06382 HD 369.10 S3 Audiovisual, Video and Television Equipment and Systems Part 10: Audio Cassette Systems 1989 CENELEC 06383 HD 423.2.1
S1/A1AMD 1 Test Code for the Determination of Airborne Acoustical Noise Emitted by Household and Similar ElectricalAppliances Part 2: Particular Requirements for Vacuum Cleaners
1989 CENELEC 0
6384 HD 184 S4 A.C. Metal-Enclosed Switchgear and Controlgear for Rated Voltages Above 1kv and up to and Including 72.5kV 1989 CENELEC 06385 HD 337 S3 Analogue Audio Disk Records and Reproducing Equipment 1989 CENELEC 06386 HD 526 S1 Marine Automatic Radar Plotting Aids (ARPA). Operational Requirements-Methods of Testing and Test Results 1989 CENELEC 06387 HD 395.2.13 S1 Medical Electrical Equipment Part 2: Particular Requirements for the Safety of Anaesthetic Machines 1989 CENELEC 06388 HD 311.2 S2 Magnetic Tape Sound Recording and Reproducing Systems Part 2: Calibration Tapes 1989 CENELEC 06389 HD 211.2 S8 Primary Batteries - Part 2: Specification Sheets 1989 CENELEC 06390 HD 352.1 S2 Specification for Insulating Materials Based on Mica-Part 1: Definitions and General Requirements 1989 CENELEC 06391 HD 395.2.11 S1 Medical Electrical Equipment-Part 2: Particular Requirements for the Safety of Gamma Beam Therapy Equipment 1989 CENELEC 06392 HD 313.2.10 S1 Base Materials for Printed Circuits-Part 2: Specifications Specification No 10: Epoxide Non-Woven/Woven Glass
Reinforced Copper- Clad Laminated Sheet of Defined Flammability (Vertical Burning Test)1989 CENELEC 0
6393 HD 313.2.4 S1 Base Materials for Printed Circuits-Part 2: Specifications. Specification No.4: Epoxide Woven Glass Fabric Copper-CladLaminated Sheet, General Purpose Grade
1989 CENELEC 0
6394 HD 530.2 S1 Controllers with Analogue Signals for Use in Industrial - Process Control Systems Part 2: Guidance for Inspection andRoutine Testing
1989 CENELEC 0
6395 HD 307.3.3 S1 Specification for Solventless Polymerisable Resinous Compounds Used for Electrical Insulation- Part 3: Specifications forIndividual Materials. Sheet Three: Unfilled Polyurethane Compounds
1989 CENELEC 0
6396 HD 513 S1 Determination of the Maximum Symmetrical Radiation Field from a Rotating Anode X-Ray Tube for Medical Diagnosis 1989 CENELEC 06397 HD 400.2 S2 Hand-Held Motor Operated Tools - Part II: Particular Specifications Section E: Circular Saws and Circular Knives 1989 CENELEC 06398 HD 195 S6 Safety Requirements for Mains Operated Electronic and Related Apparatus for Household and Similar General Use 1989 CENELEC 06399 HD 530.1 S1 Controllers with Analogue Signals for Use in Industrial - Process Control Systems Part 1: Methods of Evaluating the
Performance1989 CENELEC 0
6400 HD 459 S2 Industrial Platinum Resistance Thermometer Sensors 1989 CENELEC 06401 EN 60598-2-1 Luminaires Part 2: Particular requirements Section one - Fixed general purpose luminaires 1989 CENELEC 06402 EN 60051-2 Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories Part 2: Special Requirements
for Ammeters and Voltmeters1989 CENELEC 0
6403 HD 423.2.1 S1 Test Code for the Determination of Airborne Acoustical Noise Emitted by Household and Similar Electrical AppliancesPart 2: Particular Requirements for Vacuum Cleaners
1989 CENELEC 0
6404 HD 523.3.300S1
Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving 1989 CENELEC 0
6405 HD 311.3 S2 Magnetic Tape Sound Recording and Reproducing Systems Part 3: Methods of Measuring the Characteristics of Recordingand Reproducing Equipment for Sound on Magnetic Tape
1989 CENELEC 0
6406 EN 60598-2-9 Luminaires Part 2: Particular requirements Section 9: Photo and film luminaires (non-professional) - IncorporatesAmendment A1: 1994
1989 CENELEC 0
6407 HD 313.2.11 S1 Base Materials for Printed Circuits-Part 2: Specifications Specification No 11: Thin Epoxide Woven Glass Fabric Copper-Clad Laminated Sheet, General Purpose Grade for Use in the Fabrication of Multilayer Printed Boards
1989 CENELEC 0
6408 EN 50064 Wrought aluminium and aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear - Incorporatingcorrigendum August 2007; Incorporates Amendment A1: 1993
1989 CENELEC 0
6409 HD 478.2.4 S1 Classification of Environmental Conditions Part 2: Environmental Conditions Appearing in Nature Solar Radiation andTemperature
1989 CENELEC 0
6410 HD 483.1 S2 Sound System Equipment - Part 1: General 1989 CENELEC 06411 HD 307.2 S1 Specification for Solventless Polymerisable Resinous Compounds Used for Electrical Insulation- Part 2: Methods of Test 1989 CENELEC 06412 HD 531 S1 Helical-Scan Video Tape Cassette System Using 8mm Magnetic Tape - Video 8 1989 CENELEC 06413 HD 323.2.27 S2 Basic Environmental Testing Procedures Part 2: Tests 1989 CENELEC 06414 HD 40 001 Information Systems Interconnection; Combinations of Reference Documents for the Elaboration of Functional Standards 1989 CENELEC 06415 HD 395.2.12 S1 Medical Electrical Equipment Part 2: Particular Requirements for the Safety of Lung Ventilators for Medical Use 1989 CENELEC 06416 HD 273 S2/ A1 AMD 1 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Sewing Machines 1989 CENELEC 06417 HD 187 S4 A.C Metal-Enclosed Switchgear and Controlgear for Rated Voltages above 1KV and up to and Including 72.5 KV 1989 CENELEC 06418 HD 466.6 S1 Methods of Measurement for Radio Equipment Used in the Mobile Services Part 6: Selective - Calling and Data Equipment 1989 CENELEC 06419 HD 528 S1 A Method of Temperature - Rise Assessment by Extrapolation for Partially Type-Tested Assemblies (PTTA) of Low
Voltage Switchgear and Controlgear1989 CENELEC 0
6420 HD 311.10 S1 Magnetic Tape Sound Recording and Reproducing Systems Part 10: Time and Address Codes 1989 CENELEC 06421 HD 416.3.1 S1 Specification for Vulcanized Fibre for Electrical Purposes- Part 3: Specifications for Individual Materials. Sheet One: Flat
Sheets1989 CENELEC 0
6422 HD 313.2.12 S1 Base Materials for Printed Circuits-Part 2: Specifications Specification No 12: Thin Epoxide Woven Glass Fabric Copper-Clad Laminated Sheet of Defined Flammability for Use in the Fabrication of Multilayer Printed Boards
1989 CENELEC 0
6423 EN 60598-2-19 Luminaires Part 2: Particular requirements Section 19 Air-handling luminaires (safety requirements) - IncorporatesAmendment A2: 1998; Incorporating Corrigendum December 2005
1989 CENELEC 0
6424 HD 544 S1 Audio Recording - PCM Encoder/Decoder System 1989 CENELEC 0
6425 HD 109.5 S1 Miniature Fuses Part 5: Guidelines for Quality Assessment of Miniature Fuse-Links 1989 CENELEC 06426 EN 60051-4 Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories Part 4: Special Requirements
for Frequency Meters1989 CENELEC 0
6427 HD 395.2.7 S1 Medical Electrical Equipment-Part 2: Particular Requirements for the Safety of High- Voltage Generators of Diagnostic X-Ray Generators
1989 CENELEC 0
6428 HD 448 S2 Common Clauses for High- Voltage Switchgear and Controlgear Standards 1989 CENELEC 06429 HD 477.3.4 S1 Methods of Measurement for Equipment Used in Terrestrial Radio-Relay Systems Part 3: Simulated Systems Section Four
- Measurement for F.D.M. Transmission1989 CENELEC 0
6430 HD 423.2.4 S1 Test Code for the Determination of Airborne Acoustical Noise Emitted by Household and Similar Electrical Appliances-Part 2: Particular Requirements for Washing Machines and Spin Extractors
1989 CENELEC 0
6431 HD 483.2 S1 Sound System Equipment- Part 2: Explanation of General Terms and Calculation Methods 1989 CENELEC 06432 HD 313.2.9 S1 Base Materials for Printed Circuits-Part 2: Specifications Specification No 9: Expoxide Cellulose Paper Core, Epoxide
Glass Cloth Surfaces Copper- Clad Laminated Sheet of Defined Flammability (Vehicle Burning Test)1989 CENELEC 0
6433 HD 466.5 S1 Methods of Measurement for Radio Equipment Used in the Mobile Services Part 5: Receivers Employing Single- SidebandTechniques (R3E, H3E or J3E)
1989 CENELEC 0
6434 HD 334 S2 Marking Codes for Resistors and Capacitors 1989 CENELEC 06435 HD 307.2.2 S1 Specification for Solventless Polymerisable Resinous Compounds Used for Electrical Insulation- Part 2: Methods of Test.
Test Methods for Coating Powders for Electrical Purposes1989 CENELEC 0
6436 HD 523.3.320 Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheet320: Polyethylene Terephthalate Textile, Lightly Impregnated
1989 CENELEC 0
6437 HD 275 S1/ A1 AMD 1 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Cooking Ranges,Cooking Tables, Ovens and Similar Appliances for Household Use
1989 CENELEC 0
6438 HD 352.3.3 S1 Specification for Insulating Materials Based on Mica-Part 3: Specifications for Individual Materials. Sheet Three:Specifications for Rigid Mica Materials for Heating Equipment
1989 CENELEC 0
6439 HD 395.2.14 S1 Medical Electrical Equipment part 2: Particular Requirements for the Safety of Electro Convulsive Therapy Equipment 1989 CENELEC 06440 HD 307.3.1 S1 Specification for Solventless Polymerisable Resinous Compounds Used for Electrical Insulation- Part 3: Specifications for
Individual Materials. Sheet one: Unfilled Epoxy Resinous Compounds1989 CENELEC 0
6441 HD 492.1 S2 High-Voltage Fuses; Part 1: Current Limiting Fuses 1989 CENELEC 06442 HD 395.2.9 S1 Medical Electrical Equipment-Part 2: Particular Requirements for the Safety of Dosimeters Used in Radiotherapy with
Electrically-Connected Radiation Detectors1989 CENELEC 0
6443 EN 60335-2-46 Safety of household and similar electrical appliances Part 2: Particular requirements for commercial electric steam cookers- Incorporates Amendment A1: 1992
1989 CENELEC 0
6444 HD 323.2.29 S2 Basic Environmental Testing Procedures-Part 2: Tests. Test Eb and Guidance: Bump 1989 CENELEC 06445 HD 323.2.41 S1 Basic Environmental Testing Procedures-Part 2: Tests. Test Z/BM: Combined Dry Heat/Low Air Pressure Tests 1988 CENELEC 06446 HD 505.1.1 S1 Common Test Methods for Insulating and Sheathing Materials of Electric Cables Part 1: Methods for General Application
Section One - Measurement of Thickness and Overall Dimension Tests for Determining the Mechanical Properties1988 CENELEC 0
6447 HD 323.2.32 S1 Basic Environmental Testing Procedures - Part 2: Tests. Test Ed: Free Fall 1988 CENELEC 06448 HD 372 S1 Safety of Electrically Energized Office Machines 1988 CENELEC 06449 HD 494 S1 Lamps for Road Vehicles. Dimensional, Electrical and Luminous Requirements 1988 CENELEC 06450 HD 505.4.1 S1 Test Methods - Insulating/Sheathing Materials of Electric Cables Part 4: Polyethylene/Polypropylene Compounds Section
One - Resistance - Environmental Stress Cracking - Wrapping Test Thermal Ageing in Air - Measurement of Melt FlowIndex - Carbon Black
1988 CENELEC 0
6451 HD 500 S1 Methods to be Used for Measuring Energy Consumption of Thermal Storage Water Heaters and for the Purpose ofInforming Consumers of it
1988 CENELEC 0
6452 HD 278 S1/ A1 AMD 1 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Room Heaters; 1988 CENELEC 06453 HD 323.2.45 S1 Basic Environmental Testing Procedures-Part 2: Tests. Test XA and Guidance: Immersion in Cleaning Solvents 1988 CENELEC 0
6454 HD 53.4 S2 Rotating Electrical Machines-Part 4: Methods for Determining Synchronous Machine Quantities from Tests 1988 CENELEC 06455 HD 505.1.2 S1 Common Test Methods for Insulating and Sheathing Materials of Electric Cables Part 1: Methods for General Application
Section Two - Thermal Ageing Methods1988 CENELEC 0
6456 HD 323.2.11 Basic Environmental Testing Procedures Part 2: Tests Test Ka: Salt Mist 1988 CENELEC 06457 HD 211.1 S6 Primary Batteries - Part 1: General 1988 CENELEC 06458 HD 243 S7 Graphical Symbols for Use on Equipment. Index, Survey and Compilation of the Single Sheets 1988 CENELEC 06459 HD 504 S1 Methods of Evaluating the Performance of Electrical and Pneumatic Analogue Chart Recorders for Use in Industrial-
Process Control Systems1988 CENELEC 0
6460 HD 420 S2 Control Switches (Low Voltage Switching - Devices for Control and Auxiliary Circuit, Including Contactor Relays) 1988 CENELEC 06461 HD 507 S1 Time and Control Code for Video Tape Recorders 1988 CENELEC 06462 HD 426.3 S1 Specification for Ceramic and Glass Insulating Materials- Part 3: Individual Materials 1988 CENELEC 06463 HD 510 S1 Entrance Field Sizes of Electro-Optical X-Ray Image Intensifiers 1988 CENELEC 06464 HD 369.10 S2 Audiovisual, Video and Television Equipment and Systems - Part 10: Audio Cassette Systems 1988 CENELEC 06465 HD 477.2.5 S1 Methods of Measurement for Equipment Used in Terrestrial Radio-Relay Systems-Part 2: Measurements for Sub- Systems
Section Five- Frequency Demodulators1988 CENELEC 0
6466 HD 503 S1 Lamps for Road Vehicles Performance Requirements 1988 CENELEC 06467 HD 505.2.1 S1 Common Test Methods for Insulating and Sheathing Materials of Electric Cables Part 2: Methods Specific to Elastomeric
Compounds Section One - Ozone Resistance Test - Hot Set Test - Mineral Oil Immersion Test1988 CENELEC 0
6468 HD 323.2.29 S1 Basic Environmental Testing Procedures - Part 2: Tests. Test Eb: Bump 1988 CENELEC 06469 HD 311.6 S1 Magnetic Tape Sound Recording and Reproducing Systems- Part 6: Reel-to-Reel Systems 1988 CENELEC 06470 HD 490.5 S1 Methods of Test for Winding Wires Part 5: Electrical Properties 1988 CENELEC 06471 HD 261.4 S1 Particular Specification for Kitchen Machines 1988 CENELEC 06472 HD 323.2.35 S1 Basic Environmental Testing Procedures - Part 2: Tests. Test Fda: Random Vibration Wide Band - Reproducibility High 1988 CENELEC 06473 HD 493.3 S1 Dimensions of Mechanical Structures of the 482.6 mm (19 in) Series - Part 3: Subracks and Associated Plug-in Units 1988 CENELEC 06474 HD 195 S5 Safety Requirements for Mains Operated Electronic and Related Apparatus for Household and Similar General Use 1988 CENELEC 06475 HD 480 S1 Test Method for Evaluating Thermal Endurance of Flexible Sheet Materials Using the Wrapped Tube Method 1988 CENELEC 06476 HD 505.3.2 S1 Common Test Methods for Insulating and Sheathing Materials of Electric Cables Part 3: Methods Specific to PVC
Compounds Section Two - Loss of Mass Test - Thermal Stability Test1988 CENELEC 0
6477 HD 491.1 S1 Safety in Electroheat Installations - Part 1: General Requirements 1988 CENELEC 06478 HD 236.10 S1 Methods of Measurement for Radio Transmitters - Part 10: Methods of Measurement for Television Transmitters and
Transposers Employing Insertion Test Signals1988 CENELEC 0
6479 HD 505.3.1 S1 Common Test Methods for Insulating and Sheathing Materials of Electric Cables Part 2: Methods Specific to PVCCompounds Section one - Pressure Test at High Temperature - Tests for Resistance to Cracking
1988 CENELEC 0
6480 HD 323.2.44 S1 Basic Environmental Testing Procedures - Part 2: Tests. Guidance on Test T: Soldering 1988 CENELEC 06481 HD 323.2.37 S1 Basic Environmental Testing Procedures - Part 2: Tests. Test Fdc: Random Vibration Wide Band - Reproducibility Low 1988 CENELEC 06482 HD 477.3.6 S1 Methods of Measurement for Equipment Used in Terrestrial Radio-Relay Systems-Part 3: Simulated Systems- Section Six-
Measurements for Sound- Programme Transmission1988 CENELEC 0
6483 HD 98 S1 Test Enclosures of Non-Injection Type Constant Relative Humidity 1988 CENELEC 06484 HD 501 S1 Medical Radiology - Terminology 1988 CENELEC 06485 HD 323.2.48 S1 Basic Environmental Testing Procedures - Part 2: Tests. Guidance on the Application of the Tests of IEC Publication 68 to
Simulate the Effects of Storage1988 CENELEC 0
6486 HD 323.2.46 S1 Basic Environmental Testing Procedures - Part 2: Tests. Guidance to Test Kd: Hydrogen Sulphide Test for Contacts andConnections
1988 CENELEC 0
6487 HD 467.1.2 S1 Methods of Measurement for Radio Equipment Used in Satellite Earth Stations - Part 1: Measurements Common to Sub-Systems and Combinations of Sub- Systems. Section Two: Measurements in the r.f. Range
1988 CENELEC 0
6488 HD 496 S1 Insulating Foam-Filled Tubes and Solid Rods for Live Working 1988 CENELEC 06489 HD 477.1 S1 Methods of Measurement for Equipment Used in Terrestrial Radio-Relay Systems-Part 1: Measurements Common to Sub-
Systems and Simulated Radio-Relay Systems1988 CENELEC 0
6490 HD 46.3 S1 Packaging of Winding Wires Part 3: Taper Barrelled Delivery Spools for Winding Wires 1988 CENELEC 06491 HD 323.2.40 S1 Basic Environmental Testing Procedures - Part 2: Tests Test Z/AM: Combined Cold/Low Air Pressure Tests 1988 CENELEC 06492 HD 53.7 S1 Rotating Electrical Machines Part 7: Symbols for Types of Construction and Mounting Arrangements of Rotating Electrical
Machinery1988 CENELEC 0
6493 HD 419.3 S1 Low-Voltage Controlgear Part 3: Additional Requirements for Contactors Subject to Certification 1988 CENELEC 06494 HD 486 S1 Test Method for Evaluating the Oxidation Stability of Hydrocarbon Insulating Liquids 1988 CENELEC 06495 HD 398.5/A1 AMD 1 Power Transformers Part 5: Ability to Withstand Short-Circuit 1988 CENELEC 06496 HD 323.2.6 S2 Basic Environmental Testing Procedures - Part 2: Tests. Test Fc and Guidance: Vibration (Sinusoidal) 1988 CENELEC 06497 HD 265 S2/ A1 AMD 1 Safety of Household and Similar Electrical Appliances - Particular Requirements for Appliances for Toasters,
Grills, Roasters and Similar Appliances1988 CENELEC 0
6498 HD 426.2 S1 Specification for Ceramic and Glass Insulating Materials - Part 2: Methods of Test 1988 CENELEC 06499 HD 146 S4 Dimensions of Electronic Tubes and Valves 1988 CENELEC 06500 HD 53.6 S1 Rotating Electrical Machines Part 6: Methods of Cooling Rotating Machinery 1988 CENELEC 06501 HD 511 S1 Determination of the Luminance Distribution of Electro- Optical X- Ray Image Intensifiers 1988 CENELEC 06502 HD 488 S1 Gassing of Insulating Liquids Under Electrical Stress and Ionization 1988 CENELEC 06503 HD 391 S3 Dimensions for the Mounting of Single-Hole, Bush-Mounted, Spindle- Operated Electronic Components 1988 CENELEC 06504 HD 347 S1 Mechanical Vibration of Certain Rotating Electrical Machinery with Shaft Heights Between 80 and 400 mm Measurement
and Evaluation of the Vibration Severity1988 CENELEC 0
6505 HD 505.1.3 S1 Common Test Methods for Insulating and Sheathing Materials of Electric Cables Part 1: Methods for General ApplicationSection Three - Methods for Determining the Density - Water Absorption Tests - Shrinkage Test
1988 CENELEC 0
6506 HD 323.2.21 S3 Basic Environmental Testing Procedures-Part 2: Tests. Test V: Robustness of Terminations and Integral Mounting Devices 1988 CENELEC 06507 HD 323.2.30 S3 Basic Environmental Testing Procedures - Part 2: Tests. Test Db and Guidance: Damp Heat, Cyclic (12 + 12-Hour Cycle) 1988 CENELEC 06508 HD 365 S3 Classification of Degrees of Protection Provided by Enclosures 1988 CENELEC 06509 HD 497 S1 Specifications for Unused Insulating Liquids Based on Synthetic Aromatic Hydrocarbons 1988 CENELEC 06510 HD 423.2.2 S1 Test Code for the Determination of Airborne Acoustical Noise Emitted by Household and Similar Electrical Appliances-
Part 2: Particular Requirements for Forced Draught Convection Heaters1988 CENELEC 0
6511 HD 395.1 S2 Medical Electrical Equipment Part 1: General Requirements 1988 CENELEC 06512 HD 323.2.17 S3 Basic Environmental Testing Procedures-Part 2: Tests. Test Q: Sealing 1988 CENELEC 06513 HD 509 S1 Characteristics of Focal Spots in Diagnostic X- Ray Tube Assemblies for Medical Use 1988 CENELEC 06514 HD 323.2.31 S1 Basic Environmental Testing Procedures - Part 2: Tests. Test Ec: Drop and Topple, Primarily for Equipment- Type
Specimens1988 CENELEC 0
6515 HD 42.4 S1 Basic Dimensions of Winding Wires Part 4: Diameters of Conductors for Round Resistance Wires 1988 CENELEC 06516 HD 48 S1 Impulse Tests on Cables and Their Accessories 1988 CENELEC 06517 HD 477.2.4 S1 Methods of Measurement of Equipment Used in Terrestrial Radio-Relay Systems - Part 2: Measurements for Sub- Systems
Section Four - Frequency Modulators1988 CENELEC 0
6518 HD 323.2.34 S1 Basic Environmental Testing Procedures - Part 2: Tests. Test Fd: Random Vibration Wide Band - General Requirements 1988 CENELEC 06519 HD 495 S1 Spring-Operated Impact- Test Apparatus and its Calibration 1988 CENELEC 06520 HD 323.2.47 S1 Basic Environmental Testing Procedures - Part 2: Tests. Mounting of Components. Equipment and Other Articles for
Dynamic Tests Including Shock (Es). Bump (Eb). Vibration (Fc and Fd) and Steady-State Acceleration (Ga) and Guidance1988 CENELEC 0
6521 HD 143.3 S1 Packaging of Components for Automatic Handling Part 3: Packaging of Leadless Components on Continuous Tapes 1988 CENELEC 06522 HD 307.3.2 S1 Specification for Solventless Polymerisable Resinous Compounds Used for Electrical Insulation- Part 3: Specifications for
Individual Materials. Sheet Two: Quartz Filled Epoxy Resinous Compounds1988 CENELEC 0
6523 HD 498 S1 Flickermeter Functional and Design Specifications 1988 CENELEC 06524 HD 323.2.28 S1 Basic Environmental Testing Procedures - Part 2: Tests. Guidance for Damp Heat Tests 1988 CENELEC 06525 HD 409 S1 Guide to the Testing of Circuit-Breakers with Respect to out-of-Phase Switching 1988 CENELEC 06526 HD 487 S1 Determination of Water in Insulating Liquids by Automatic Coulometric Karl Fischer Titration 1988 CENELEC 06527 HD 482 S1 Radiation Safety of Laser Products, Equipment, Classification, Requirements, and Users Guide 1988 CENELEC 06528 HD 369.8 S1 Audiovisual, Video and Television Equipment and Systems- Part 8: Symbols and Identification 1988 CENELEC 06529 HD 246.6 S2 Diagrams, Charts, Tables Part 6: Preparation of Unit Wiring Diagrams and Tables 1988 CENELEC 06530 HD 477.3.2 S1 Methods of Measurement for Equipment Used in Terrestrial Radio-Relay Systems-Part 3: Simulated Systems- Section
Two- Measurements in the Baseband1988 CENELEC 0
6531 HD 505.1.4 S1 Common Test Methods for Insulating and Sheathing Materials of Electric Cables Part 1 Methods for General ApplicationSection Four - Tests at Low Temperature
1988 CENELEC 0
6532 HD 288 S1 Safety of Household and Similar Electric Appliances - Part 2: Particular Requirements for Commercial Electric ForcedConvection Ovens
1987 CENELEC 0
6533 HD 490.3 Methods of Test for Winding Wires Part 3: Mechanical Properties 1987 CENELEC 06534 HD 370 S2 Modular Plug-in Unit and Standard 19-Inch Rack Amounting Unit Based on NIM Standard (for Electronic Nuclear
Instruments)1987 CENELEC 0
6535 HD 461 Process Stream Radiation Monitoring Equipment in Light Water Nuclear Reactors for Normal Operating and IncidentConditions
1987 CENELEC 0
6536 HD 23 Electrical Installations for Caravans with Supply Voltages up to 250 V 1987 CENELEC 06537 HD 490.2 Methods of Test for Winding Wires Part 2: Determination of Dimensions 1987 CENELEC 06538 HD 380 S2 Test Methods for Evaluating Resistance to Tracking and Erosion of Electrical Insulating Materials Used Under Severe
Ambient Conditions1987 CENELEC 0
6539 HD 490.4 Methods of Test for Winding Wires Part 4:Chemical Properties 1987 CENELEC 06540 HD 477.2.1 Methods of Measurement for Equipment Used in Terrestrial Radio-Relay Systems Part 2: Measurements for Sub- Systems
Section One - General1987 CENELEC 0
6541 HD 278 S1 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Room Heaters 1987 CENELEC 06542 HD 260 S3 Safety of Household and Similar Electrical Appliances Part 2: Particular Requirements for Coffee Mills and Coffee
Grinders1987 CENELEC 0
6543 HD 323.2.13 Basic Environmental Testing Procedures Part 2: Tests Test M: Low air Pressure 1987 CENELEC 06544 HD 481.1 Electromagnetic Compatibility for Industrial-Process Measurement and Control Equipment Part 1: General Introduction 1987 CENELEC 06545 HD 450.7 Hearing Aids Part 7: Measurement of Performance Characteristics of Hearing Aids for Quality Inspection for Delivery
Purposes1987 CENELEC 0
6546 HD 323.2.52 Basic Environmental Testing Procedures Part 2: Tests Test kb: Salt Mist, Cylic (Sodium Chloride Solution) 1987 CENELEC 06547 HD 77 Lighting Fittings for Incandescent Lamps for Domestic and Similar Purposes 1987 CENELEC 06548 HD 413.3 Operating Conditions for Industrial-Process Measurement and Control Equipment Part 3: Mechanical Influences 1987 CENELEC 06549 HD 143.2 Packaging of Components for Automatic Handling Part 2: Tape Packaging of Components with Unidirectional Leads on
Continuous Tapes1987 CENELEC 0
6550 HD 253 S3/ A1 AMD 1 Safety of Household and Similar Electrical Appliances Part 2: Particular Requirements for Electric Irons 1987 CENELEC 06551 HD 313.2.1 Base Materials for Printed Circuits Part 2: Specifications Specification No 1: Phenolic Cellulose Paper Copper - Clad
Laminated Sheet, High Electrical Quality1987 CENELEC 0
6552 HD 323.2.10 S2 Basic Environmental Testing Procedures - Part 2: Tests. Test J: Mould Growth 1987 CENELEC 06553 HD 357 S2 A Modular Instrumentation System for Data Handling; CAMAC System 1987 CENELEC 0
6554 HD 481.2 Electromagnetic Compatibility for Industrial-Process Measurement and Control Equipment Part 2: Electrostatic DischargeRequirements
1987 CENELEC 0
6555 HD 462 Process Stream Radiation Monitoring Equipment in Light Water Nuclear Reactors for Normal Operating and IncidentConditions
1987 CENELEC 0
6556 HD 463 Helican - Scan Video Tape Cassette Systems Using 12.65mm (0.5 in) Magnetic Tape on Type VHS 1987 CENELEC 06557 HD 477.2.2 Methods of Measurement for Equipment Used in Terrestrial Radio - Relay Systems Part 2: Measurements for Sub- Systems
Section Two - Stand-by Channel Switching Equipment1987 CENELEC 0
6558 HD 349 Preferred Diameters of Wire Terminations of Capacitors and Resistors 1987 CENELEC 06559 HD 369.5 Audio-Visual, Video and Television Equipment and Systems Part 5: Control, Synchronization and Address Codes Chapter
1: Synchronized Tape/Visual Operating Practice1987 CENELEC 0
6560 HD 358 S2 Gas-Insulated Metal- Enclosed Switchgear for Rated Voltages of 72.5 kV and Above 1987 CENELEC 06561 HD 313.1.S4 Base Materials for Printed Circuits - Part 1: Test Methods 1987 CENELEC 06562 HD 323.2.54 Basic Environmental Testing Procedures Part 2: Tests Test TA: Soldering, Solderability Testing by the Wetting Balance
Method1987 CENELEC 0
6563 HD 313.2.6 Base Materials for Printed Circuits Part 2: Specifications Specification No 6: Phenolic Cellulose Paper Copper- CladLaminated Sheet of Defined Flammability (Horizontal Burning Test)
1987 CENELEC 0
6564 HD 323.2.51 S1 Basic Environmental Testing Procedures Part 2: Tests Z/BFc: Combined Dry Heat/Vibration (Sinusoidal) Tests for BothHeat-Dissipating and Non Heat-Dissipating Specimens
1987 CENELEC 0
6565 HD 490.6 Methods of Test for Winding Wires Part 6: Thermal Properties 1987 CENELEC 06566 HD 245.4 Letter Symbols to Be Used in Electrical Technology Part 4: Symbols of Quantities to Be Used for Rotating Electrical
Machines1987 CENELEC 0
6567 HD 354 S2 Colours of Indicator Lights and Push-Buttons 1987 CENELEC 06568 HD 444.2.3 Fire Hazard Testing Part 2: Test Methods Bad- Connection Test with Heaters 1987 CENELEC 06569 HD 53.9 Rotating Electrical Machines Part 9: Noise Limits 1987 CENELEC 06570 HD 474 S1 Dimensions of Ball and Socket Couplings of String Insulator Units 1987 CENELEC 06571 HD 395.2.6 Medical Electrical Equipment Part 2: Particular Requirements for the Safety of Microwave Therapy Equipment 1987 CENELEC 06572 HD 251 S3/ A3 AMD 3 Safety of Household and Similar Electrical Appliances: General Requirements 1987 CENELEC 06573 HD 323.2.17 S2 Basic Environmental Testing Procedures - Part 2: Tests. Test Q: Sealing 1987 CENELEC 06574 HD 323.2.9 S2 Basic Environmental Testing Procedures - Part 2: Tests. Guidance for Solar Radiation Testing 1987 CENELEC 06575 HD 323.2.50 S1 Basic Environmental Testing Procedures Part 2: Tests Tests Z/AFc: Combined Cold/Vibration (Sinusoidal) Tests for Both
Heat-Dissipating and Non-Heat-Dissipating Specimens1987 CENELEC 0
6576 HD 251 S3 Safety of Household and Similar Electrical Appliances: General Requirements 1987 CENELEC 06577 HD 469 Expression of the Properties of Logic Analysers 1987 CENELEC 06578 HD 65.3 Lamp Caps and Holders Together with Gauges for the Control of Interchangeability and Safety Part 3: Gauges 1987 CENELEC 06579 HD 323.2.3 S2 Basic Environmental Testing Procedures - Part 2: Tests. Test Ca: Damp Heat, Steady State 1987 CENELEC 06580 HD 468 Ionizing Radiation Measurement Systems with Analogue or Digital Signal Processing for Thickness Measurements 1987 CENELEC 06581 HD 285 S1 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Commercial Electric Deep Fat
Fryers1987 CENELEC 0
6582 HD 272 S3 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Ultra-Violet and Infra- RedRadiation Skin Treatment Appliances for Household Use
1987 CENELEC 0
6583 HD 477.2.6 S1 Methods of Measurement for Equipment Used in Terrestrial Radio-Relay Systems Part 2: Measurements for Sub- SystemsSection Six - Diversity, Twin-Path and Hot Stand-by Equipment
1987 CENELEC 0
6584 HD 273 S2 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Sewing Machines 1987 CENELEC 06585 HD 42.1 S3 Basic Dimensions of Winding Wires - Part 1: Diameters of Conductors for Round Winding Wires 1987 CENELEC 0
6586 HD 489 S1 Recommended Dimensions for Hexagonal and Square Crimping-Die Cavities, Indentors, Gauges, Outer Conductor CrimpSleeves and Centre Contact Crimp Barrels for R.F. Cables and Connectors
1987 CENELEC 0
6587 HD 450.11 Hearing Aids Part 11: Symbols and Other Markings on Hearing Aids and Related Equipment 1987 CENELEC 06588 HD 450.9 Hearing Aids Part 9: Methods of Measurement of Characteristics of Hearing Aids with Bone Vibrator Output 1987 CENELEC 06589 HD 323.2.1 S2 Basic Environmental Testing Procedures Part 2: Tests Test A: Cold 1987 CENELEC 06590 HD 251 S3/ A2 AMD 2 Safety of Household and Similar Electrical Appliances: General Requirements 1987 CENELEC 06591 HD 284 S1 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Commercial Electric Ranges,
Ovens and Hob Elements1987 CENELEC 0
6592 HD 477.2.6 Methods of Measurement for Equipment Used in Terrestrial Radio-Relay Systems Section Six - Diversity, Twin-Path andHot Stand-by Equipment
1987 CENELEC 0
6593 HD 203 Grid System for Printed Circuits 1987 CENELEC 06594 HD 286 S1 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Commercial Electric Griddles
and Griddle Grills1987 CENELEC 0
6595 HD 417 S2 Camac-Serial Highway Interface System 1987 CENELEC 06596 HD 323.2.7 S2 Basic Environmental Testing Procedures - Part 2: Tests. Test Ga and Guidance: Acceleration, Steady State 1987 CENELEC 06597 HD 323.2.20 S2 Basic Environmental Testing Procedures - Part 2: Tests. Test T: Soldering 1987 CENELEC 06598 HD 65.2 Lamp Caps and Holders Together with Gauges for the Control of Interchangeability and Safety Part 2: Lampholders 1987 CENELEC 06599 HD 465.1 Lead - Acid Traction Batteries Part 1: General Requirements and Methods of Test 1987 CENELEC 06600 HD 236.8 S2 Methods of Measurement for Radio Transmitters - Part 8: Vestigial- Sideband Demodulators for use in Conjunction with
Transmitters or Transposers for Monochrome or Colour Television1987 CENELEC 0
6601 HD 398.3 Power Transformers Insulation Levels and Dielectric Tests 1986 CENELEC 06602 HD 450.6 S1 Hearing Aids Part 6: Characteristics of Electrical Input Circuits for Hearing Aids 1986 CENELEC 06603 HD 275 S1 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Cooking Ranges, Cooking
Tables, Ovens and Similar Appliances for Household Use1986 CENELEC 0
6604 HD 466.8 Methods of Measurement for Radio Equipment Used in the Mobile Services Part 8: Methods of Measurement for Antennas 1986 CENELEC 06605 HD 385 S2 Test Methods for Insulations and Sheaths of Electric Cables and Cords (Elastomeric and Thermoplastic Compounds) 1986 CENELEC 06606 HD 53.12 Rotating Electrical Machines Part 12: Starting Performance of Single-Speed Three-Phase Cage Induction Motors for
Voltages up to and Including 660 V, 50 Hz1986 CENELEC 0
6607 HD 476.1 Solderless Connections Part 1: Solderless Wrapped Connections - General Requirements, Test Methods and PracticalGuidance
1986 CENELEC 0
6608 HD 53.1 S2/ A1 AMD 1 Rotating Electrical Machines - Part 1: Rating and Performance 1986 CENELEC 06609 HD 369.5.2 Audio-Visual, Video and Television Equipment and Systems Part 5: Control Synchronization and Address Codes Chapter
II: Control Systems for Two Still Projectors Operating Practice1986 CENELEC 0
6610 HD 395.2.5 Medical Electrical Equipment Part 2: Particular Requirements for the Safety of Ultrasonic Therapy Equipment 1986 CENELEC 06611 HD 253 S3 Safety of Household and Similar Electrical Appliances Part 2: Particular Requirements for Electric Irons 1986 CENELEC 06612 HD 351.5 Rigid Precision Coaxial Lines and Their Associated Precision Connectors Part 5: 50 Ohms 3.5mm Rigid Precision Coaxial
Line with Provision for Mounting Connectors1986 CENELEC 0
6613 HD 274 S1 Requirements for the Connection of Washing Machines and Dishwashers to the Water Supply Mains 1986 CENELEC 06614 HD 279 S1 Safety of Household and Similar Electrical Appliances- Part 2: Particular Requirements for Frying Pans, Deep Fat Fryers
and Similar Appliances1986 CENELEC 0
6615 HD 95.4 Aerials for the Reception of Sound and Television Broadcasting in the Frequency Range 30MHz to 1GHz Part 4: Guide forthe Preparation of Aerial Performance Specifications - Detailed Specification Sheet Format
1986 CENELEC 0
6616 HD 374 S2 CAMac - Organization of Multi-Crate Systems. Specification of the Branch-Highway and CAMAC Crate Controller TypeA1
1986 CENELEC 0
6617 HD 269 S2 Safety of Household and Similar Electrical Appliances- Part: Particular Requirements for Refrigerators and Food Freezers 1986 CENELEC 0
6618 HD 276 S1/ A1 AMD 1 Safety of Household and Similar Electrical Appliances Particular Requirements for Range Hoods 1986 CENELEC 06619 HD 369.3 Audio-Visual, Video and Television Equipment and Systems Part 3: Connectors for the Interconnection of Equipment in
Audio- Visual Systems1986 CENELEC 0
6620 HD 280 S1 Safety of Household and Similar Electrical Appliances: Particular Requirements for Electric Fans and Regulators 1986 CENELEC 06621 HD 384.2 International Electrotechnical Vocabulary Chapter 826: Electrical Installations of Buildings 1986 CENELEC 06622 HD 479 Oscilloscopes and Peak Voltmeters for Impulse Tests 1986 CENELEC 06623 HD 281 S1 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Floor Treatment Machines and
Wet Scrubbing Machines1986 CENELEC 0
6624 HD 475 S1 Dimensions of Planchets Used in Nuclear Electronic Instruments 1986 CENELEC 06625 HD 252 S3 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Vacuum Cleaners and Water
Suction Cleaning Appliances1986 CENELEC 0
6626 HD 481.3 S1 Electromagnetic Compatibility for Industrial-Process Measurement and Control Equipment - Part 3: RadiatedElectromagnetic Field Requirements
1986 CENELEC 0
6627 HD 195 S4 Safety Requirements for Mains Operated Electronic and Related Apparatus for Household and Similar General Use 1985 CENELEC 06628 HD 277 S1 Safety of Household and Similar Electrical Appliances - Particular Requirements for Motor- Compressors 1985 CENELEC 06629 HD 395.2.3 Medical Electrical Equipment Part 2: Particular Requirements for the Safety of Short- Wave Therapy Equipment 1985 CENELEC 06630 HD 53.1 S2 Rotating Electrical Machines - Part 1: Rating and Performance 1985 CENELEC 06631 HD 405.1 Test on Electric Cables Under Fire Conditions Part 1: Test on a Single Vertical Insulated Wire or Cable 1985 CENELEC 06632 HD 323.2.11 S1 Basic Environmental Testing Procedures Part 2: Tests Test Ka: Salt Mist 1985 CENELEC 06633 HD 53.8 S3 Rotating Electrical Machines - Part 8: Terminal Markings and Direction of Rotation of Rotating Machines 1985 CENELEC 06634 HD 457 Code for Designation of Colours 1985 CENELEC 06635 HD 392 S2 Heat Test Source (H.T.S.) Lamps for Carrying Out Heating Tests on Luminaires 1985 CENELEC 06636 HD 455 Sound Transmission Using Infra-Red Radiation 1985 CENELEC 06637 HD 256 S2 Safety of Household and Similar Electrical Appliances. Particular Requirements for Washing Machines 1985 CENELEC 06638 HD 251 S3/ A1 AMD 1 Safety of Household and Similar Electrical Appliances: General Requirements 1985 CENELEC 06639 HD 402 S2 Standard Colours for Thermoplastic Materials Used for the Insulation for Low-Frequency Cables and Wires 1985 CENELEC 06640 HD 276 S1 Safety of Household and Similar Electrical Appliances Particular Requirements for Range Hoods 1985 CENELEC 06641 HD 450.5 Hearing Aids Part 5: Nipples for Insert Earphones 1985 CENELEC 06642 HD 211.1 S5 Primary Batteries - Part 1: General 1985 CENELEC 06643 HD 458 Time Base of Non- Broadcast Video Recorders 1985 CENELEC 06644 HD 395.2.2 Medical Electrical Equipment Part 2: Particular Requirements for the Safety of High Frequency Surgical Equipment 1985 CENELEC 06645 HD 460 Audio - Frequency Calibration Tape for Transverse Track Recorders 1985 CENELEC 06646 HD 245.2 Letter Symbols to be Used in Electrical Technology Part 2: Telecommunications and Electronics 1985 CENELEC 06647 HD 452.1 Analogue Signals for Process Control Systems Part 1: Direct Current Signals 1984 CENELEC 06648 HD 439 Measuring Methods for Television Tape Machines 1984 CENELEC 06649 HD 453 Multiple Controllers in a Camac Crate 1984 CENELEC 06650 HD 1/160 General Introductory Document on European (or CEN) Methods of Test for Wood Preservatives 1984 CENELEC 06651 HD 446.2 Thermocouples Part 2: Tolerances 1984 CENELEC 06652 HD 129.6 Flanges for Waveguides Part 6: Relevant Specifications for Flanges for Medium Flat Rectangular Waveguides 1984 CENELEC 06653 HD 134.2 S2 Radio-Frequency Connectors - Part 2: Coaxial Unmatched Connector 1984 CENELEC 06654 HD 450.1 Hearing Aids Part 1: Hearing Aids with Induction Pick-up Coil Input 1984 CENELEC 06655 HD 451 Transverse Track Video Recorders 1984 CENELEC 0
6656 HD 450.2 Hearing Aids Part 2: Hearing Aids with Automatic Gain Control- Circuits 1984 CENELEC 06657 HD 129.2 S2 Flanges for Waveguides - Part 2: Revelant Specifications for Flanges for Ordinary Rectangular Waveguides 1984 CENELEC 06658 HD 369.13 Audio-Visual Video and Television Equipment and Systems Part 13: Digital Counter for Audio Cassette Systems 1984 CENELEC 06659 HD 187 S3 A.C. Metal-Enclosed Switchgear and Controlgear for Rated Voltages Above 1kV and up to and Including 72.5kV 1984 CENELEC 06660 HD 450.3 Hearing Aids Part 3: Hearing Aids Equipment Not Entirely Worn on the Listener 1984 CENELEC 06661 HD 265 S2 Safety of Household and Similar Electrical Appliances - Particular Requirements for Appliances for Toasters, Grills,
Roasters and Similar Appliances1984 CENELEC 0
6662 HD 416.1 Specification for Vulcanized Fibre for Electrical Purposes Part 1: Definitions and General Requirements 1984 CENELEC 06663 HD 389.2 Safety Rules Concerning the Electronic Equipment of Machines for Resistance Welding and Allied Processes 1984 CENELEC 06664 HD 454 Measuring Methods for Video Tape Properties 1984 CENELEC 06665 HD 254 S2 Safety of Household and Similar Electric Appliances Particular Requirements for Electric Shavers, Hair Clippers and
Similar Appliances1984 CENELEC 0
6666 HD 264 S2 Safety of Household and Similar Electrical Appliances - Particular Requirements for Appliances for Heating Liquids(CENELEC EN 60335-2-15: 1990)
1984 CENELEC 0
6667 HD 376 S2 Methods to be Used for Measuring Energy Consumption of Electric Ovens for Household Use and for the Purpose ofInforming Consumers of It
1984 CENELEC 0
6668 HD 447 Helicon-Scan Video-Tape Cassette System Using 19mm (3/4in) Magnetic Tape, as U-Format 1984 CENELEC 06669 HD 129.1 S2 Flanges for Waveguides - Part 1: General Requirements 1984 CENELEC 06670 HD 263 S1 Particular Specification for Clothes Dryers and Towel Dryers 1984 CENELEC 06671 HD 236.9 Methods of Measurement for Radio-Transmitters Part 9: Transposers for Monochrome and Colour Television 1984 CENELEC 06672 HD 450.0 Hearing Aids Part 0: Measurement of Electroacoustical Characteristics 1984 CENELEC 06673 HD 268 S2 Safety of Household and Similar Electrical Appliances- Particular Requirements for Tumble Dryers 1984 CENELEC 06674 HD 257 S2 Safety of Household and Similar Electrical Appliances Particular Requirements for Dishwashers 1984 CENELEC 06675 HD 351.4 S2 Rigid Precision Coaxial Lines and Their Associated Precision Connectors - Part 4: 21 mm Rigid Precision Coaxial Line
and Associated Hermaphroditic Precision Coaxial Connector Characteristic Impedance 50 OHMs (Type 9/21)Characteristic Impedance
1984 CENELEC 0
6676 HD 450.4 Hearing Aids Part 4: Magnetic Field Strength in Audio- Frequency Induction Loops for Hearing Aid Purposes 1984 CENELEC 06677 HD 369.4 Audio-Visual, Video and Television Equipment and Systems Part 4: Preferred Matching Valves for the Interconnection of
Equipment in a System1984 CENELEC 0
6678 HD 95.3 Aerials for the Reception of Sound and Television Broadcasting in the Frequency Range 30 MHz to 1GHz Part 3: Methodsof Measurements of Mechanical Properties, Vibration and Environmental Tests
1984 CENELEC 0
6679 HD 444.2.1 Fire Hazard Testing Part 2: Test Methods Glow- Wire Test and Guidance 1983 CENELEC 06680 HD 435 Density Meters Utilizing Ionizing Radiation Definitions and Test Methods 1983 CENELEC 06681 HD 442 Radiation Protection Equipment for the Measuring and Monitoring of Airborne Tritium 1983 CENELEC 06682 HD 364 S2 High Voltage Cable Plug and Socket Connections for Medical X-Ray Equipment 1983 CENELEC 06683 HD 425 Sound Level Meters 1983 CENELEC 06684 HD 431 Block Transfer in Camac Systems 1983 CENELEC 06685 HD 109 S3 Cartridge Fuse-Links for Miniature Fuses - First Supplement: Colour Coding 1983 CENELEC 06686 HD 255 S2 Safety of Household and Similar Electric Appliances Particular Requirements for Clocks 1983 CENELEC 06687 HD 432 Definitions of Camac Terms Used in IEC Publications 1983 CENELEC 06688 HD 441 Methods of Test for the Determination of the Flammability of Solid Electrical Insulating Materials When Exposed to an
Igniting Source1983 CENELEC 0
6689 HD 445 Subroutines for Camac 1983 CENELEC 06690 HD 430 Topflash/Flipflash Photographic Flash Lamp Array 1983 CENELEC 0
6691 HD 436 Dimensions of Optical Fibres 1983 CENELEC 06692 HD 428 Three-Phase Oil-Immersed Public Distribution Transformers, 50 Hz, from 50 to 2500 kVA, with Highest Voltage for
Equipment Not Exceeding 24 kV1983 CENELEC 0
6693 HD 266.4 Particular Specification for Appliances for Skin or Hair Treatment 1983 CENELEC 06694 HD 266.3 Particular Specification for Appliances for Skin or Hair Treatment 1983 CENELEC 06695 HD 424 Specification for High- Voltage Fuse-Links for Motor Circuit Applications 1983 CENELEC 06696 HD 143.1 Packaging of Components for Automatic Handling Part 1: Tape Packaging of Components with Axial Leads on Continuous
Tapes1983 CENELEC 0
6697 HD 444.2.2 Fire Hazard Testing Part 2: Test Methods Meedle- Flame Test 1983 CENELEC 06698 HD 429 S1 Methods of Test for Volume Resistivity and Surface Resistivity of Solid Electrical Insulating Materials 1983 CENELEC 06699 HD 423.100 Test Code for the Determination of Airborne Acoustical Noise Emitted by Household and Similar Electrical Appliances
Part 1: General Requirements1983 CENELEC 0
6700 HD 258 S2 Safety of Household and Similar Electrical Appliances - Particular Requirements for Massage Appliances 1983 CENELEC 06701 HD 311.1 Magnetic Tape Sound Recording and Reproducing Systems Part 1: General Conditions and Requirements 1983 CENELEC 06702 HD 433 Safety Requirements for Arc Welding Equipment Coupling Devices for Welding Cables 1983 CENELEC 06703 HD 129.3 S2 Flanges for Waveguides- Part 3: Relevant Specifications for Flanges for Flat Rectangular Waveguides 1983 CENELEC 06704 HD 41 S2 Test Procedure for the Determination of the Temperature Index of Enamelled Winding Wires 1983 CENELEC 06705 HD 414.2 An Interface System for Programmable Measuring Instruments (Byte Serial, Bit Parallel) Part 2: Code and Format
Conventions1983 CENELEC 0
6706 HD 398.5 Power Transformers Part 5: Ability to Withstand Short-Circuit 1983 CENELEC 06707 HD 420 Control Switches (Low Voltage-Devices for Control and Auxiliary Circuits, Including Contactor Relays) 1982 CENELEC 06708 HD 142 S2 Terms and Definitions for Printed Circuits 1982 CENELEC 06709 HD 193 S2 Voltage Bands for Electrical Installations of Buildings 1982 CENELEC 06710 HD 46.2 S2 Packaging of Winding Wires - Part 2: Delivery Spools for Winding Wires 1982 CENELEC 06711 HD 422 Low-Voltage Air-Break Switches, Air-Break Disconnectors, Air-Break Switch-Disconnectors and Fuse-Combination Units 1982 CENELEC 06712 HD 134.4 S2 Radio-Frequency Connectors - Part 4: R.F. Coaxial Connectors with Inner Diameter of Outer Conductor 16 mm (0.63 in)
with Screw Lock. Characteristic Impedance 50 Ohms (Type 7-16)1982 CENELEC 0
6713 HD 421 Low-Voltage Motor Starters 1982 CENELEC 06714 HD 419 Low-Voltage Switchgear and Controlgear Contactors 1982 CENELEC 06715 HD 426.1 S1 Specification for Ceramic and Glass Insulating Materials - Part 1: Definitions and Classification 1982 CENELEC 06716 HD 323.1 S1 Basic Environment Testing Procedures Part 1: General and Guidance 1982 CENELEC 06717 HD 434 Ripple Control Receivers 1982 CENELEC 06718 HD 267 S1 Safety of Household and Similar Electrical Appliances - Particular Requirements for Spin Extractors 1982 CENELEC 06719 HD 418 Low-Voltage Switchgear and Controlgear Circuit- Breakers 1982 CENELEC 06720 HD 65 Lamp Caps and Holders Together with Gauges for the Control of Interchangeability and Safety 1982 CENELEC 06721 HD 249.2 Laboratory Resistors Part 2: Laboratory A.C. Resistors 1981 CENELEC 06722 EN 50047 Low voltage switchgear and controlgear for industrial use Control switches Position switches 30 55 _أ Dimensions and
characteristics1981 CENELEC 0
6723 HD 219 S2 Low Pressure Sodium Vapour Lamps 1981 CENELEC 06724 HD 351.3 S2 Rigid Precision Coaxial Lines and Their Associated Precision Connectors - Part 3: 14 mm Rigid Precision Coaxial Line
and Associated Hermaphroditic Precision Coaxial Connector - Characteristic Impedances 50 Ohms and 75 Ohms1981 CENELEC 0
6725 HD 241 S2 Identification of Apparatus Terminals and General Rules for a Uniform System of Terminal Marking, Using an Alpha-Numeric Notation
1981 CENELEC 0
6726 HD 307.1 S2 Specification for Solventless Polymerizable Resinous Compounds Used for Electrical Insulation - Part 1: Definitions andGeneral Requirements. Basis for Classification of Polymerisable Resinous Compounds
1981 CENELEC 0
6727 EN 50041 Low voltage switchgear and controlgear for industrial use Control switches Position switches 42,5 80 _أ Dimensions andcharacteristics
1981 CENELEC 0
6728 HD 400.3 Hand-Held Motor Operated Tools - Part 2 : Particular Specifications 1981 CENELEC 06729 HD 410.2 Specification for Press Board and Press Paper for Electric Purposes Part 2: Method of Test 1980 CENELEC 06730 HD 403 Standard Method of Measurement of Lamp Cap Temperature Rise 1980 CENELEC 06731 HD 401 Safety Requirements for Electronic Measuring Apparatus 1980 CENELEC 06732 HD 388 Transformers for Tubular Discharge Lamps Having a No-Load Output Voltage Exceeding 1000 V (Generally Called Neon-
Transformers)1980 CENELEC 0
6733 HD 415 Detection and Determination of Specified Anti-Oxydant Additives in Insulating Oils 1980 CENELEC 06734 HD 414.1 An Interface System for Programmable Measuring Instruments (Byte Serial, Bit Parallel) Part 1: Functional Specifications,
Electrical Specifications System Application and Requirements for the Designer and User1980 CENELEC 0
6735 HD 413.1 Operating Conditions for Industrial - Process Measurement and Control Equipment Part 1: Temperature Humidity andBarometric Pressure
1980 CENELEC 0
6736 HD 398.2 Power Transformers Part 2: Temperature Rise 1980 CENELEC 06737 HD 404 Test Procedures for Amplifiers and Preamplifiers for Semiconductor Detectors for Ionizing Radiation 1980 CENELEC 06738 HD 427 Specific Safety Rules for the Installation of Equipment for Electric Arc Welding and Allied Processes 1980 CENELEC 06739 HD 220 S2 Safety Requirements for Radio Transmitting Equipment 1980 CENELEC 06740 HD 410.1 Specification for Pressboard and Presspaper for Electric Purposes Part 1: Definitions and General Requirements 1980 CENELEC 06741 HD 413.2 Operating Conditions for Industrial Process Measurement and Control Equipment Part 2: Power 1980 CENELEC 06742 HD 123.6 S2 Hollow Metallic Waveguides Part 6 Relevant Specification for Medium Flat Rectangular Waveguides 1980 CENELEC 06743 EN 50042 Low voltage switchgear and controlgear for industrial use Terminal marking Terminals for external associated electronic
circuit components and contacts1980 CENELEC 0
6744 HD 261 Particular Specification for Kitchen Machines 1980 CENELEC 06745 HD 408 Alternating Current Disconnectors (Isolators) and Earthing Switches 1979 CENELEC 06746 HD 348 S2 High-voltage Alternating- Current Circuit-Breakers 1979 CENELEC 06747 HD 396 Definitions of Test Method Terms for Semiconductor Radiation Detectors and Scintillation Counting 1979 CENELEC 06748 HD 42.2 S2 Basic Dimensions of Winding Wires - Part 2: Maximum Over-All Diameters of Enamelled Round Winding Wires 1979 CENELEC 06749 HD 245.1 S3 Letter Symbols to be Used in Electrical Technology - Part 1: General 1979 CENELEC 06750 HD 394.1 Specification for Conduits for Electrical Installations Part 1 General Requirements 1979 CENELEC 06751 HD 399 Measurement of Transformer and Reactor Sound Level 1979 CENELEC 06752 HD 389 Safety Rules Concerning Electrical Equipment of Machines for Resistance Welding and Allied Processes 1979 CENELEC 06753 HD 393 Outside Diameters of Conduits for Electrical Installations and Threads for Conduits and Fittings 1979 CENELEC 06754 HD 400.2 Hand-Held Motor Operated Tools Part II: Particular Specifications Sections A to G (CEE 20, Part II, Sections A to G,
Modified)1979 CENELEC 0
6755 HD 395.1 Safety of Medical Electrical Equipment Part 1 General Requirements 1979 CENELEC 06756 HD 309.2 Class 2 Direct Connected Alternating-Current Watthour Meter Part II 1979 CENELEC 06757 HD 407 Safety Rules for the Use of Equipment for Electric Arc Welding and Allied Processes 1979 CENELEC 06758 HD 398.4 Power Transformers Part 4: Tappings and Connections 1979 CENELEC 06759 HD 309.1 Class 2 Direct Connected Alternating-Current Watthour Meters Part I 1979 CENELEC 06760 HD 398.1 Power Transformers Part 1: General 1979 CENELEC 06761 HD 381 Methods of Test for the Determination of Ionic Impurities in Electrical Insulating Materials by Extraction with Liquids 1979 CENELEC 0
6762 HD 387 Interconnections Between Video-Tape Recorders and Television Receivers for 50Hz Systems 625 Lines 1979 CENELEC 06763 HD 236.5 S4 Methods of Measurement for Radio Transmitters - Part 5: Measurements Particular to Transmitters and Transposers for
Monochrome and Colour Television1979 CENELEC 0
6764 HD 398.1/A1 AMD 1 Power Transformers Part 1: General 1979 CENELEC 06765 HD 390 Inductive Voltage Dividers 1979 CENELEC 06766 HD 369.1 Audio-Visual, Video and Television Equipment and Systems Part 1: General 1978 CENELEC 06767 HD 373 Interface Between Numerical Controls and Industrial Machines 1978 CENELEC 06768 HD 42.3 S2 Basic Dimensions of Winding Wires - Part 3: Dimensions of Conductors of Rectangular Copper Winding Wires 1978 CENELEC 06769 HD 372 Safety of Electrically Energized Office Machines 1978 CENELEC 06770 HD 382 Determination of the Aromatic Hydrocarbon Content of New Mineral Insulating Oils 1978 CENELEC 06771 HD 27 Colours of the Cores of Flexible Cables and Cords 1978 CENELEC 06772 HD 362/A1 AMD 1 Safety Rules for the Construction of Equipment for Electric Arc Welding and Allied Processes 1978 CENELEC 06773 HD 378 Methods to be Used for Measuring Energy Consumption of Electric Automatic Dishwashers for Cold Water Supply Only,
for Household Use and for the Purpose of Informing Consumers of It1978 CENELEC 0
6774 HD 261.3 Particular Specification for Kitchen Machines 1978 CENELEC 06775 HD 369.2 Audio-Visual, Video and Television Equipment and Systems Part 2: Explanation of General Terms 1978 CENELEC 06776 HD 236.4 S2 Methods of Measurement for Radio Transmitters - Part 4: Amplitude/ Frequency Characteristics and Non- Linearity
Distortion in Transmitters for Radiotelephony and Sound Broadcasting1978 CENELEC 0
6777 HD 251.2 General Specification for Electric Cooking and Heating Appliances for Household and Similar Purposes 1978 CENELEC 06778 HD 95.1 Aerials for the Reception of Sound and Television Broadcasting in the Frequency Range 30 MHz to 2 GHz Part 1:
Electrical and Mechanical Characteristics1978 CENELEC 0
6779 HD 379 Area Exposure Product Meter 1978 CENELEC 06780 HD 95.2 Aerials for the Reception of Sound and Television Broadcasting in the Frequency Range 30 MHz to 2 GHz Part 2: Methods
of Measurement of Electrical Performance Parameters1978 CENELEC 0
6781 HD 337 S2 Processed Disk Records and Reproducing Equipment 1978 CENELEC 06782 HD 262.2 Particular Specification for Portable Immersion Heaters 1978 CENELEC 06783 HD 368 Direct Acting Recording Electrical Measuring Instruments and Their Accessories 1977 CENELEC 06784 HD 266.2 Particular Specification for Appliances for Skin and Hair Treatment 1977 CENELEC 06785 HD 312 Documentation to Be Supplied with Electronic Measuring Apparatus 1977 CENELEC 06786 HD 129.7 Flanges for Waveguides Part 7: Relevant Specifications for Flanges for Circular Waveguides 1977 CENELEC 06787 HD 87 Testing and Calibration of Ultrasonic Therapeutic Equipment 1977 CENELEC 06788 HD 262 Particular Specification for Portable Immersion Heaters 1977 CENELEC 06789 HD 304 Dimensions of Plugs for Hearing Aids 1977 CENELEC 06790 HD 367 On-Load Tap-Changers 1977 CENELEC 06791 HD 259.2 Particular Specification for Food Waste Disposal Units 1977 CENELEC 06792 HD 148 S2 Methods for the Measurement of Direct Interelectrode Capacitances of Electronic Tubes and Valves 1977 CENELEC 06793 EN 50013 Low voltage switchgear and controlgear for industrial use Terminal marking and distinctive number for particular control
switches1977 CENELEC 0
6794 HD 347 Mechanical Vibration of Certain Rotating Electrical Machinery with Shaft Heights Between 80 and 400 mm Measurementand Evaluation of the Vibration Severity
1977 CENELEC 0
6795 HD 261.2 Particular Specification for Kitchen Machines 1977 CENELEC 06796 HD 363 Dimensions of Spindle Ends for Manually Operated Electronic Components 1977 CENELEC 06797 EN 50011 Low voltage switchgear and controlgear for industrial use Terminal marking, distinctive number and distinctive letter for
particular contactor relays1977 CENELEC 0
6798 HD 250.2 General Specification for Electric Motor Operated Appliances for Household and Similar Purposes 1977 CENELEC 06799 HD 323.2.2 S1 Basic Environmental Testing Procedures - Part 2: Tests. Test B: Dry Heat 1977 CENELEC 06800 HD 46.3 Packaging of Winding Wires Part 3: Taper Barrelled Delivery Spools for Winding Wires 1976 CENELEC 06801 HD 329 Test on Hollow Insulators for Use in Electrical Equipment 1976 CENELEC 06802 HD 362 Safety Rules for the Construction of Equipment for Electric Arc Welding and Allied Processes 1976 CENELEC 06803 HD 134.7 Radio-Frequency Connector Part 7: R.F. Coaxial Connectors with Inner Diameter of Outer Conductor 9.5mm (0.374 in)
with Bayonet Lock-Characteristic Impedance 50 Ohms (Type C)1976 CENELEC 0
6804 HD 356 Radiographic Cassettes 1976 CENELEC 06805 HD 323.2.5 S1 Basic Environmental Testing Procedures - Part 2: Tests. Test SA: Simulated Solar Radiation at Ground Level 1976 CENELEC 06806 HD 134.6 Radio-Frequency Connectors Part 6: R.F. Coaxial Connectors for Cables 96 IEC 75-17 and Larger 1976 CENELEC 06807 HD 409 Guide to the Testing of Circuit-Breakers with Respect to out-of-Phase Switching 1976 CENELEC 06808 HD 351.1 Rigid Precision Coaxial Lines and Their Associated Precision Connectors Part 1: General Requirements and Measuring
Methods1976 CENELEC 0
6809 HD 330 Hand and/or Foot Contamination Monitors and Warning Assemblies 1976 CENELEC 06810 HD 350.2 General Purpose Rigid Coaxial Transmission Lines and Their Associated Flange Connectors Part 1: Detail Specifications 1976 CENELEC 06811 HD 355 High Voltage Switches 1976 CENELEC 06812 HD 308 Identification and Use of Cores of Flexible Cables 1976 CENELEC 06813 HD 345 Test of the Insulation of Bars and Coils of High Voltage Machines 1976 CENELEC 06814 EN 50005 Low Voltage Switchgear and Controlgear for Industrial Use Terminal Marking and Distinctive Number General Rules 1976 CENELEC 06815 HD 259 Particular Specification for Food Waste Disposal Units 1976 CENELEC 06816 HD 351.2 Rigid Precision Coaxial Lines and Their Associated Precision Connectors Part 2: 50ohm 7mm Rigid Precision Coaxial
Line and Associated Hermaphroditic Precision Coaxial Connector1976 CENELEC 0
6817 HD 350.1 General Purpose Rigid Coaxial Transmission Lines and Their Associated Flange Connectors Part 1: General Requirementsand Measuring Methods
1976 CENELEC 0
6818 HD 339 Series Capacitors for Power Systems 1976 CENELEC 06819 HD 326 Electrical Measuring Instruments Utilizing Radio- Active Sources 1976 CENELEC 06820 HD 268 Particular Specification for Clothes Dryers of the Tumbler Type 1976 CENELEC 06821 HD 246.5 Diagrams, Charts, Tables Part 5: Preparation of Interconnection Diagrams and Tables 1976 CENELEC 06822 HD 331 Standard Direction of Movement for Actuators Which Control the Operation of Electrical Apparatus 1976 CENELEC 06823 HD 123.2 Hollow Waveguides Part 2: Relevant Specifications for Ordinary Rectangular Waveguides 1976 CENELEC 06824 HD 245.3 Letter Symbols to be Used in Electrical Technology Part 3: Logarithmic Quantities and Units 1976 CENELEC 06825 HD 324 Identification of Insulated and Bare Conductors by Colours 1976 CENELEC 06826 HD 134.5 Radio-Frequency Connectors Part 5: R.F. Coaxial Connectors for Cables 96 IEC 50-17 and Larger 1976 CENELEC 06827 HD 352.2 Specification for Insulating Materials Based on Built-up Mica or Treated Mica Paper Part 2: Methods of Test 1976 CENELEC 06828 HD 353 General Test Conditions for Industrial Electro- Heating Equipment 1976 CENELEC 06829 HD 266 Particular Specification for Appliances for Skin or Hair Treatment 1975 CENELEC 06830 HD 262 S1 Particular Specification for Portable Immersion Heaters 1975 CENELEC 06831 HD 236.3 Methods of Measurement for Radio Transmitters Part 3: Wanted and Unwanted Modulation 1975 CENELEC 06832 HD 251 General Specification for Electric Cooking and Heating Appliances for Household and Similar Purposes 1975 CENELEC 06833 HD 123.7 Hollow Metallic Waveguides Part 7: Relevant Specifications for Square Waveguides 1975 CENELEC 06834 HD 305 IEC Reference Coupler for the Measurement of Hearing Aids Using Earphones Coupled to the Ear by Means of Ear Inserts 1975 CENELEC 06835 HD 303 Test Procedures for Germanium Gamma-Ray Detectors 1975 CENELEC 0
Hercules Ebooks Institutewww.herculesebooks.com [email protected] +989141908737
6836 EN 50006 The Limitation of Disturbances in Electricity Supply Networks Caused by Domestic and Similar Appliances Equipped withElectronic Devices
1975 CENELEC 0
6837 HD 42.4 Basic Dimensions of Winding Wires Part 4: Diameters of Conductors for Round Resistance Wires 1975 CENELEC 06838 HD 246.2 Diagrams, Charts, Tables Part 2: Item Designation 1975 CENELEC 06839 HD 249 Laboratory D.C. Resistors 1975 CENELEC 06840 HD 236.1 Methods of Measurement for Radio Transmitters Part 1: General Conditions of Measurement, Frequency, Output Power
and Power Consumption1975 CENELEC 0
6841 HD 302 Transistorized Ballast for Fluorescent Lamps 1975 CENELEC 06842 HD 301 Indirect Acting Electrical Measuring Instruments 1975 CENELEC 06843 HD 236.2 Methods of Measurement for Radio Transmitters Part 2: Bandwidth, Out- of-Band Power and Power of Non-Essential
Oscillations1975 CENELEC 0
6844 HD 123.4 Hollow Metallic Waveguides Part 4: Relevant Specifications for Circular Waveguides 1975 CENELEC 06845 HD 260 Particular Specification for Coffee Grinders and Mills 1975 CENELEC 06846 HD 242 Maximum Case Dimensions for Capacitors and Resistors 1975 CENELEC 06847 HD 196 Plugs, Sockets - Outlets and Couplers for Industrial Purposes 1975 CENELEC 06848 HD 53.6 Rotating Electrical Machines Part 6: Methods of Cooling Rotating Machinery 1974 CENELEC 06849 HD 91 Rules for Ohmic Resistors Used in the Power Circuits of Electrically Powered Vehicles 1974 CENELEC 06850 HD 252 Particular Specification for Vacuum Cleaners and Water Suction Cleaning Appliances 1974 CENELEC 06851 HD 250 General Specification for Electric Motor Operated Appliances for Household and Similar Purposes 1974 CENELEC 06852 HD 147 Preparation of Outline Drawings of Oscilloscope and Picture Tubes 1974 CENELEC 06853 HD 253 Particular Specification for Electric Irons, Ironess and Pressing Machines 1974 CENELEC 06854 HD 215 Safety Requirements for Indicating and Recording Electrical Instruments and Their Accessories 1974 CENELEC 06855 HD 123.3 Hollow Metallic Waveguides Part 3: Relevant Specifications for Flat Rectangular Waveguides 1974 CENELEC 06856 HD 138 Sealing Test for Pressurized Waveguide Tubing and Assemblies 1974 CENELEC 06857 HD 134.1 Radio-Frequency Connectors Part 1: General Requirements and Measuring Methods 1974 CENELEC 06858 HD 120 Characteristic Impedances and Dimensions of Radio Frequency Coaxial Cables 1974 CENELEC 06859 HD 93.2 Part 2: Electrical Equipment of Machines Used in Large Series Production Lines 1974 CENELEC 06860 HD 123.1 Hollow Metallic Waveguides Part 1: General Requirements and Measuring Methods 1974 CENELEC 06861 HD 145 Numbering of Electrodes and Designation of Units in Electronic Tubes and Valves 1974 CENELEC 06862 HD 231 Dimensions of Three-Phase Induction Motors 1974 CENELEC 06863 HD 46.1 Packaging of Winding Wires Part 1: Containers for Round Winding Wires 1974 CENELEC 06864 HD 194 Requirements Concerning the Electrical Safety of Laser - Apparatus and Installations 1974 CENELEC 06865 HD 92 Mains Operated Electric Fence Controllers 1974 CENELEC 06866 HD 178 Methods for Specifying the Characteristics of Electro- Mechanical Transducers for Shock and Vibration Measurements 1974 CENELEC 06867 HD 225 Rules for Rotating Electrical Machines for Rail and Road Vehicles 1974 CENELEC 06868 HD 134.3 Radio Frequency Connectors Part 3: Two Pin Connector for Twin Balanced Aerial Feeders 1974 CENELEC 06869 HD 119 Fuse-Holders for Miniature Cartridge Fuse-Links 1974 CENELEC 06870 HD 222 Standard Sheets for Barrel Thread for E14 and E27 Lampholder with Shade Holder Ring 1974 CENELEC 06871 HD 97 Recommended Methods of Measurement on Receivers for Frequency-Modulation Broadcast Transmissions 1974 CENELEC 06872 HD 24 No - Load Voltage of Arc - Welding Equipment 1973 CENELEC 0
