CEN 4500 Data Communications Instructor: S. Masoud Sadjadi sadjadi/Teaching/ sadjadi At cs Dot fiu...
-
Upload
aubrey-fletcher -
Category
Documents
-
view
218 -
download
1
Transcript of CEN 4500 Data Communications Instructor: S. Masoud Sadjadi sadjadi/Teaching/ sadjadi At cs Dot fiu...
CEN 4500 Data Communications
Instructor: S. Masoud Sadjadihttp://www.cs.fiu.edu/~sadjadi/Teaching/
sadjadi At cs Dot fiu Dot edu
Chapter 3: The Data Link LayerChapter 3: The Data Link Layer
CEN 4500, S. Masoud Sadjadi 2
Recap: Data Link Layer
• Data link layer is the second layer in the hierarchy of the hybrid reference model
• Is to transform a raw transmission facility into a line that appears free of undetected transmission errors.
CEN 4500, S. Masoud Sadjadi 3
Recap: Data Link Layer
• We will study algorithms for achieving reliable, efficient communication between two adjacent machines at the data link layer.
– Adjacent machines are two machines that are connected by a communication channel that acts conceptually like a wire (e.g., coaxial cable, telephone line, or point-to-point wireless channel)
– A channel is called “wire-like” if the bits are delivered in exactly the same order in which they are sent.
• What makes this layer essential is the fact that– communication channels make errors occasionally, – they have only a finite data rate, and – there is a non-zero propagation delay
CEN 4500, S. Masoud Sadjadi 4
Agenda
• Design Issues
• Error Detection and Correction
• Elementary Data Link Protocols
• Sliding Window Protocols
• Protocol Verification
• Example Data Link Protocols
• Summary
CEN 4500, S. Masoud Sadjadi 5
Data Link Layer Design Issues• Functions of the Data Link Layer
– Providing a well-defined service to the network layer
– Dealing with transmission errors
– Regulating the flow of data so that slow receivers are not swamped by fast senders
• Solution– Data link layer takes the packets from the network layer
and encapsulates them into frames for transmission.
– A frame contains header, payload (packet), and trailer.
– Frame management is what data link layer is all about.
CEN 4500, S. Masoud Sadjadi 6
Functions of the Data Link Layer
• Relationship between packets and frames.
CEN 4500, S. Masoud Sadjadi 7
Services Provided to Network Layer• The principle service is transferring data from the network
layer on the source machine to the network layer on the destination machine.
(a) Virtual communication.(b) Actual communication.
CEN 4500, S. Masoud Sadjadi 8
Reasonable Service Possibilities
• Unacknowledged connectionless service– When error-rate is very low, so that the recovery
is left to the higher layers– Also for real-time traffic, such as voice– Most LANs use this on the data link layer
• Acknowledged connectionless service– Useful over unreliable channels, such as wireless
• Acknowledged connection-oriented service– Each frame is numbered to guarantee exactly
once and in-order delivery of frames– A reliable bit stream
CEN 4500, S. Masoud Sadjadi 9
Services Provided to Network Layer
• Placement of the data link protocol.
CEN 4500, S. Masoud Sadjadi 10
Framing
• Physical layer accepts a raw bit stream and attempt to deliver it to the destination.
• It is up to the data link layer to detect and, if necessary, correct errors.
• The usual approach is for data link layer to break the bit stream up into discrete frames and compute the checksum for each frame.
• Framing Methods1. Character count: count can be garbled2. Flag bytes with byte stuffing: starting and ending delimiters3. Starting and ending flags, with bit stuffing4. Physical layer coding violations
CEN 4500, S. Masoud Sadjadi 11
Framing: Character Count
• A character stream. – (a) Without errors. – (b) With one error.
CEN 4500, S. Masoud Sadjadi 12
Framing: Flag Bytes w/ Byte Stuffing• What if the flag byte’s bit pattern happens occurs in
the date? Insert a escape byte (ESC)
(a) A frame delimited by flag bytes.(b) Four examples of byte sequences before and after stuffing.
CEN 4500, S. Masoud Sadjadi 13
Framing: Bit Stuffing• Each frame starts and ends with a special bit pattern,
01111110 (in fact, a flag byte).• Whenever the sender’s data link layer encounters
five consecutive 1s in the data, it automatically stuffs a 0 bit into the outgoing bit stream
Bit stuffing(a) The original data.(b) The data as they appear on the line.(c) The data as they are stored in receiver’s memory after destuffing.
CEN 4500, S. Masoud Sadjadi 14
Framing: Physical Layer Coding Violation
• This method is only applicable to networks in which the encoding on the physical medium contains some redundancy.
• For example, some LANs encode 1 bit of data by using 2 physical bits
– A 1 bit is a high-low pair– A 0 bit is a low-high pair– So, every data bit has a transition in the middle:
easy for the receiver to locate the bit boundaries.– High-high and low-low are not used for data!
CEN 4500, S. Masoud Sadjadi 15
Agenda
• Design Issues
• Error Detection and Correction
• Elementary Data Link Protocols
• Sliding Window Protocols
• Protocol Verification
• Example Data Link Protocols
• Summary
CEN 4500, S. Masoud Sadjadi 16
Error Background• Transmission errors will be with us for a while
– The local loops are still twisted copper pairs– Wireless communication is becoming more common
• Error Property– As a result of the physical process that generates them,
errors on some media (e.g., radio) tend to come in bursts rather than singly.
• A burst error does not imply that all the bits are wrong; it just implies that at least the first and last are wrong
– If errors were independent, most block would contain errors
– However, they are much harder to correct than are isolated errors
CEN 4500, S. Masoud Sadjadi 17
Error Handling
• Error Detection – On channels that are highly reliable, such as fiber,
it is cheaper to detect errors and retransmit data– Error-detecting codes add enough redundant
information to detect errors.
• Error Correction– On channels such as wireless links that make many
errors, retransmission does not make much sense– Error-correcting codes need to include enough
redundant information not only to detect the error but also to correct it
CEN 4500, S. Masoud Sadjadi 18
Error-Detecting Codes: CRC
• Cyclic Redundancy Check (CRC)– Also known as polynomial code– Based on treating bit strings as representations of
polynomials with coefficients of 0 and 1 only– A k-bit frame is regarded as the coefficient list for
a polynomial with k terms, ranging from xk-1 to x0.
– For example, 110001 represents x5 + x4 + x0
– Polynomial arithmetic is done modulo 2• There are no carries for addition or borrows for
subtractions, both are identical to exclusive OR
CEN 4500, S. Masoud Sadjadi 19
CRC
Calculation of the polynomial code checksum.
• The sender and receiver agree upon a generator polynomial, G(x), both of its high and low bits are 1
• To compute the checksum for some frame with m bits, corresponding to the polynomial M(x), the frame must be longer than the generator polynomial
• We append a checksum to the end of the frame, so that the resulting polynomial is dividable by G(x)
CEN 4500, S. Masoud Sadjadi 20
Error-Correcting Code: Hamming Code
• A frame consists of m data bits and r redundant, or check, bits.
– n = m + r; called n-bit codeword.
• Hamming Distance– The number of bit positions in which two codewords
differ– If two codewords are a Hamming distance d apart, it will
require d single-bit errors to convert one into the other.– Given the algorithm to compute the check bits, that are 2m
legal codewords out of 2n codewords– The Hamming distance of the complete code (the list of
legal codewords) is the minimun distance of any two codewords in the list.
CEN 4500, S. Masoud Sadjadi 21
Error-Correcting Code: Hamming Code
• To detect d errors– you need a distance d + 1 code
– If you receive a frame with d error, it will have an illegal codeword
• To correct d errors– you need a distance 2d + 1 code
– The closer legal codeword is the one to pick
• Example, Parity Bit– The number of 1s are either even or odd
– A code with single parity has distance 2
CEN 4500, S. Masoud Sadjadi 22
Error-Correcting Code: Hamming Code
• How many check bit do we need to be able to correct a 1 bit error?
• For each 2m legal codewords, we need to have n illegal ones, so n + 1 codewords should be reserved
• 2m(n + 1) < 2n OR
• (m + r + 1) < 2rHamming code to correct burst errors.
CEN 4500, S. Masoud Sadjadi 23
Agenda
• Design Issues
• Error Detection and Correction
• Elementary Data Link Protocols
• Sliding Window Protocols
• Protocol Verification
• Example Data Link Protocols
• Summary
CEN 4500, S. Masoud Sadjadi 24
Elementary Data Link Protocols
• An Unrestricted Simplex Protocol– Protocol 1
• A Simplex Stop-and-Wait Protocol– Protocol 2
• A Simplex Protocol for a Noisy Channel– Protocol 3
• Try the simulator on your own and discuss it in your study group!
CEN 4500, S. Masoud Sadjadi 25
Assumptions for the Protocols• The physical, data link, and network layers are
independent processes that communicate by passing messages back and forth.
• Machine A is trying to send a long message to machine B, using a reliable, connection-oriented service.
– Later, we will consider the case where B will try to send a message to A simultaneously.
• A has an infinite supply of data ready to be sent to B.– In a realistic situation, the data link layer will not sit in a
tight loop waiting for an event, but it will be implemented using interrupts
• Machines do not crash• As far as the data link layer is concerned, the packet
passed across the interface to data link is pure data.
CEN 4500, S. Masoud Sadjadi 26
Protocol Definitions
Continued
Some definitions needed in the protocols to follow. These are located in the file protocol.h.
CEN 4500, S. Masoud Sadjadi 27
Protocol Definitions(ctd.)
Some definitions needed in the
protocols to follow. These are located in the file protocol.h.
CEN 4500, S. Masoud Sadjadi 28
Unrestricted Simplex Protocol:Protocol 1
CEN 4500, S. Masoud Sadjadi 29
Simplex Stop-and-Wait Protocol:Protocol 2
CEN 4500, S. Masoud Sadjadi 30
A Simplex Protocol for a Noisy Channel: Protocol 3
A positive acknowledgement
with retransmission protocol.
Continued
CEN 4500, S. Masoud Sadjadi 31
A Simplex Protocol for a Noisy Channel : Protocol 3 (ctd.)
A positive acknowledgement with retransmission protocol.
CEN 4500, S. Masoud Sadjadi 32
Agenda
• Design Issues
• Error Detection and Correction
• Elementary Data Link Protocols
• Sliding Window Protocols
• Protocol Verification
• Example Data Link Protocols
• Summary
CEN 4500, S. Masoud Sadjadi 33
Sliding Window Protocols• Need for both way transmission of data
– Using two simplex channels: two expensive
– Using one channel in both directions (intermixed), with temporarily delaying the ack (piggybacking)
• A One-Bit Sliding Window Protocol– Protocol 4
• A Protocol Using Go Back N– Protocol 5
• A Protocol Using Selective Repeat– Protocol 6
CEN 4500, S. Masoud Sadjadi 34
Sliding Window Protocols (2)
A sliding window of size 1, with a 3-bit sequence number.
(a) Initially.
(b) After the first frame has been sent.
(c) After the first frame has been received.
(d) After the first acknowledgement has been received.
•On the sender side: the frames that are sent or can be sent (no ack yet).•On the receiver side: the frames that it may accept (discards other frames).
CEN 4500, S. Masoud Sadjadi 35
A One-Bit Sliding Window Protocol: Protocol 4
Continued
CEN 4500, S. Masoud Sadjadi 36
A One-Bit Sliding Window Protocol : Protocol 4 (ctd.)
CEN 4500, S. Masoud Sadjadi 37
A One-Bit Sliding Window Protocol : Protocol 4 (2)
Two scenarios for protocol 4. (a) Normal case. (b) Abnormal case, if both sides starts sending simultaneously (similar situation can occur as a result of premature timeouts). The notation is (seq, ack, packet number). An asterisk indicates where a network layer accepts a packet.
CEN 4500, S. Masoud Sadjadi 38
A Protocol Using Go Back N : Protocol 5
Pipelining and error recovery. Effect on an error when
(a) Receiver’s window size is 1.
(b) Receiver’s window size is large.
CEN 4500, S. Masoud Sadjadi 39
Sliding Window Protocol Using Go Back N : Protocol 5
Continued
CEN 4500, S. Masoud Sadjadi 40
Sliding Window Protocol Using Go Back N: Protocol 5
Continued
CEN 4500, S. Masoud Sadjadi 41
Sliding Window Protocol Using Go Back N: Protocol 5
Continued
CEN 4500, S. Masoud Sadjadi 42
Sliding Window Protocol Using Go Back N : Protocol 5
CEN 4500, S. Masoud Sadjadi 43
Sliding Window Protocol Using Go Back N: Protocol 5
• Simulation of multiple timers in software.
CEN 4500, S. Masoud Sadjadi 44
A Sliding Window Protocol Using Selective Repeat: Protocol 6
Continued
CEN 4500, S. Masoud Sadjadi 45Continued
A Sliding Window Protocol Using Selective Repeat : Protocol 6 (2)
CEN 4500, S. Masoud Sadjadi 46
A Sliding Window Protocol Using Selective Repeat: Protocol 6 (3)
Continued
CEN 4500, S. Masoud Sadjadi 47
A Sliding Window Protocol Using Selective Repeat: Protocol 6 (4)
CEN 4500, S. Masoud Sadjadi 48
A Sliding Window Protocol Using Selective Repeat : Protocol 6 (5)
(a) Initial situation with a window size seven.
(b) After seven frames sent and received, but not acknowledged.
(c) Initial situation with a window size of four.
(d) After four frames sent and received, but not acknowledged.
CEN 4500, S. Masoud Sadjadi 49
Problem with non-sequential receive• Suppose that we have a 3-bit seq. number
– The sender is permitted to send up to 7 frames before it is required to wait for an ACK
– Initially, we have (a)– The sender transmits 0, 1, 2, 3, 4, 5, and 6– The receiver accepts any frame between 0 to 6 (inclusive)– All seven frames arrive correctly, so the receiver acknowledges them
and advances its window (b)– Suppose that all the ACKs are lost– The sender times out and retransmits frame 0– The receiver accepts this frame as it is within 7, 0, …, 5– The receiver sends a piggybacked ACK for frame 6, since 0, …, 6
have been received previously.– The sender is happy that all its transmission are through and advances
its window, and send 7, 0, …, 5.– Receiver then sends from 7 and the old frame 0 to the network!!!– Therefore, the network gets an incorrect frame and the protocol fails!!
CEN 4500, S. Masoud Sadjadi 64
Summary
• Data Link Layer– The task of data link layer is to convert the raw bit stream
offered by the physical layer into a stream of frames for use by the network layer.
– Framing methods: character count, byte and bit stuffing.
– It provides error control, flow control
• Protocols– Protocols 1 to 6
– Sliding window protocols
– Protocol Verification: FSMs & Petri Nets
– Examples: SDLC, HDLC, and PPP.