CEELOK FAS-T CONNECTORS - Farnell element14 · CeeLok FAS-T connectors offer a small form factor,...

CEELOK FAS-T CONNECTORS10 GB/S ETHERNET CONNECTIVITY . . . COMPACT . . . RUGGED . . . RELIABLE

AEROSPACE, DEFENSE & MARINE /// CEELOK FAS-T CONNECTORS


CEELOK FAS-T CONNECTORSSmall Form Factor, Field Terminable Connectors

CeeLok FAS-T connectors offer a small form factor, field terminable I/O connector capable of 10 Gb/s Ethernet. Crimp-snap contacts enable easy termination and field repairability. The integral backshell offers easy 360-degree shield termination.

The compact size 8 shell helps designers meet the needs of reduced SWaP (size, weight, and power).

The connector’s T-shaped contact pattern provides noise cancellation and decoupling to minimize crosstalk and increase signal integrity.

The CeeLok FAS-T connector is a true 100-ohm impedance connector that is compatible with Cat 5e and Cat 6A cables and protocols ranging from the USB and IEEE 1394 to gigabit and 10G Ethernet.

HIGH SPEED

• Gigabit and 10 Gigabit Ethernet • Compatible with Cat 5e, Cat 6A or

Cat 7 cables• T-shaped pin pattern improves

signal integrity through uniform crosstalk cancellation

SPACE AND WEIGHT SAVINGS

• Compact Size 8 shell

EASY TERMINATION AND FIELD REPAIRABILITY• Crimp-snap, 39029-style contacts

FLEXIBLE BACKSHELL/SHIELDING OPTIONS• Backshell integrated in plug body

provides low profile, low cost, low weight strain relief and EMI protection

• Compatible with multiple braid termination techniques, adapter styles and seal boots

RUGGED• Scoop-proof design• Insert assembly mechanically

retained for ≤25 lb. retention force• Robust coupling ring mechanism

TE Components . . . TE Technology . . . TE Know-how . . . AMP | Agastat | CII | Hartman | Kilovac | Microdot | Nanonics | Polamco | Raychem | Rochester | DEUTSCH

SEACON Phoenix | L.L. Rowe | Phoenix Optix | SEACON

Get your product to market faster with a smarter, better solution.


CeeLok FAS-T Connectors

Performance Characteristics

DATA RATES• Gigabit and 10 Gigabit Ethernet when used with Cat 5e,

Cat 6A or Cat 7 cables

ELECTRICAL

• Insulation resistance: 5000 MΩ ambient, 1000 MΩ @ 175°C

• Dielectric withstanding voltage: 500 VAC @ sea level 100 VAC @ 70,000 ft.

• Shielding effectiveness: per MIL-DTL-38999• Shell-to-shell conductivity: 5 mV initial, 10 mV final

MECHANICAL

• Vibration, Sine: MIL-DTL-38999 Series III (60 g), 4 hrs per axis, no elevated temperature

• Vibration, Random: EIA-364-28 Condition VI Letter J (43.92 g)

• Durability: 500 mating cycles• Contact Retention: 10 lb. min.• Coupling Torque: 8 in-lb. max.

ENVIRONMENTAL PROPERTIES

• Operating Temperature: -65°C to +175˚C• Sealing: Altitude Immersion: 70,000 ft.

(mated condition)• IP67: Mated condition• IPX6 (water jet): Receptacle, panel mounted

(unmated condition)• Corrosion Resistance: 500 hr. salt mist —

black zinc nickel per AMS-2417

MATERIALS

• Shell: Electroless nickel or black zinc for DOD-approved, RoHS-compliance, corrosion resistance (500 hr salt mist)

• Insert: High-temperature thermoplastic for excellent temperature endurance

• Low dielectric constant for superior signal integrity• Contacts: Beryllium copper alloy

STANDARDS AND SPECIFICATIONS

• Product Specification: 108-2482• Application Specification: 114-32025• Instruction Sheet: 408-32046• Test Report: 501-134002• Electrical Performance Report: 505-116000




Type Contacts Included Key

Part No.

Electroless Nickel Black Zinc Nickel

Plug

Socket

N 2102353-1 2102353-2

A 2102353-3 2102353-4

B 2102353-5 2102353-6

None

N 2102353-7 2102353-8

A 2102353-9 1-2102353-0

B 1-2102353-1 1-2102354-2

Receptacle

Pin

N 2102352-1 2102352-2

A 2102352-3 2102352-4

B 2102352-5 2102352-6

None

N 2102352-7 2102352-8

A 2102352-9 1-2102352-0

B 1-2102352-1 1-2102352-2

Box-Mount Receptacle

Pin

N 2102343-1 2102343-2

A 2102343-3 2102343-4

B 2102343-5 2102343-6

None

N 2102343-7 2102343-8

A 2102343-9 1-2102343-0

B 1-2102343-1 1-2102343-2

Box-Mount Receptacle, PC Tail

N N 2102453-1 2102453-2

A A 2102453-3 2102453-4

B B 2102453-5 2102453-6

Jam Nut Receptacle, PC Tail

N N 2102351-1 2102351-2

A A 2102351-3 2102351-4

B B 2102351-5 2102351-6

Contacts

Wire SizePart No.

Pin Socket, Hooded

24 – 26 AWG 2102349-3 2102350-5

Application ToolingHand Crimp Tool: M22520/2-01Crimp Positioner: TE Part No. 2217375-1Insertion/Extraction Tool: TE Part No. 2217376-1

Pin Socket

Ø .034 Ø .047

.175

.115

.243

.087Ø .0210B B

Ø .050

Ø .020Section B-B

TE1924_2102349_53% / Michael Douglas / 11-4-2013


Ø .047

Ø .034

.155

.175

Ø .021

.250

.140 Min.

.021 Min..140

Ø .051 Max.



PRODUCT DIMENSIONS

Boxmount Receptacle Kit AssemblyPart No. 2102343

Jam Nut Receptacle Assembly, PC TailPart No. 2102351


See Detail A5 3

17

5 3

17

Red Full Mate Indicator

.913

Ø .636

1.350

Ø .585

Detail AScale: 6:1

Recptacle AssemblyPlated Aluminum Shell

Pin Contact(2102349-3)



Master Key

See Detail A

.850

.125.670

O-Ring

PCB MountAluminum Shell

Master Key

Triple Start 5/8'Modified Acme Thread

11/16" — 24 Thread

Jam Nut

Detail AScale 5:1

5 6

3

346512

78

4

128

7

3X 4-40 UNF Thread



PRODUCT DIMENSIONS

Receptacle Kit AssemblyPart No. 2102352

Plug Kit AssemblyPart No. 2102353



55

33

11

77

Detail AScale: 6:1

See Detail A

Jam Nut

O-Ring

Pin Contacts(2102349-3)

Receptacle AssemblyAluminum Shell

11/16" — 24 Threads

Triple Start 5/8"Modified Acme Thread

1/8" Max. Panel Thickness

Red Full Mate Indicator

1.350.670

.850

Ø .698 ±.005

.669 ±.002

3571

Plug AssemblyAluminum Shell and Nut

Socket Contact(2102350-5)




PRODUCT DIMENSIONS

Boxmount Receptacle Assembly, PC TailPart No. 2102453



Front Insert: Qty. 1Material: BlackThermoplastic

Internal Snap Ring: Qty. 1Material: Stainless Steel

Rear Insert: Qty. 1Material: BlackThermoplastic

Contact Pins: Qty. 8Material: Gold PlatedLeaded Cooper

Red Full Mate Indicator Band

5/8” Modified TripleStart Acme Thread

Receptacle: Qty. 1Material: Aluminum

3X 4-40 UNCBoard Mounting Holes

4X Ø .094

Master Key.950

.670

.723

.723

.913

2X .362

.125



PRODUCT DIMENSIONS

Protective Cover Cap, PlugPart No. 2221682-1

Protective Cover Cap, ReceptaclePart No. 2221478-1


LanyardMaterial: Stainless Steel Wire

RivetMaterial: SteelFinish: Black Zinc Nickel

Protective CoverMaterial: Aluminum Alloy 6061-T6Finish: Electroless Nickel

Rivet, OvalMaterial: 300 Series Stainless SteelFinish: Passivated

RingMaterial: Stainless SteelFinish: Passivated

Interfacial SealMaterial: Silicone Rubber

(7.00)

(Ø .685)(Ø .555)

(.047)


Protective CoverRatchet StyleFinish: See Table

Lanyard:Material: Stainless Steel Wire

RivetMaterial: SteelFinish: Black Zinc Nickel

Protective CoverRatchet StyleFinish: See Table

RingMaterial: 300 Series Stainless SteelFinish: Passivated2221478-1 and 2221478-2

2221478-3 and 2221478-4

(7.000)

(6.049)

(Ø .840)

(Ø .695)

(Ø .260)

(Ø .142)(.047)





ACCESSORIES

SolderSleeve Shield Terminators

CRES-Lock Bandstraps

Convenient and Effective• Terminates a ground lead to cable

shield in order to ground the shield• Simple, quick termination• Available with and without pigtails

Versatile• Center or end strip for ease

of termination• Handles wide range of high

data rate cables and diameters

Environmental• Operating temperature:

-55°C to +200˚C• Environmentally sealed• Mechanically robust

Physical or Other Properties• Terminates tin, silver and

nickel flat or round braids• Provides 360° of shielding

Product Offering• Contact TE for a complete listing

of SolderSleeve shield terminators

Easy to Use• Quick, easy, cost-effective

and reliable termination of braided shielding

High Performance• Low profile, one-piece design

eliminates EMI leakage paths

Rugged• Shock, vibration and environmental

tested to meet aerospace and defense requirements

Electrical• Operating Temperature:

-65°C to +200°C• Electrical Resistance:

Meets ≤1.0 mΩ requirement of AS85049/128

• Corrosion Resistance: 500 hr. salt spray

Mechanical• Tensile Strength: 200 lb.• Braid Retention: Meets 100 lb.

requirement of AS85049/128

Application Tooling• Micro Tie-Dex II, A30199

Description Part No.

Bandstrap BND-0812S




ACCESSORIES

Heat-Shrinkable Molded Boots

Hazard Matched• Different materials to meet

different temperature and environmental requirements

• Optional with pre-applied adhesives for quick installation and high-reliability IP67 sealing

• Epoxy sealing kits available

Versatile• Sealing and strain relief to

the wires and cables• Straight or 90 degree cable exit

Application Tooling• HL1910E or the HG-501A

ThermoGun heat gun and appropriate hot air reflectors

Product Offering

Temperature Range Material Adhesive

Lined Size* mmDescriptive Part No.

Straight 90°

-20°C to 60°CFlexible polyolefin Yes 24/10.4/5.6 202K121-4/42-0 222K121-4/42-0

Flexible polyolefin Yes 30/14.2/5.9 202K132-4/42-0 222K132-4/42-0

-55°C to 120°C Fluid-resistant elastomer Yes 30/14.2/5.9 202K132-25/86-0 222K132-25/86-0

-55°C to 135°C Flexible polyolefin No 30/14.2/5.9 202K132-4-0 222K132-4-0

-55°C to 200°C Modified fluoroelastomer No 30/14.2/5.9 202K132-12-0 222K132-12-0

-75°C to 150°C

Fluid-resistant elastomer Yes 30/14.2/5.9 202K132-25/225-0 222K132-25/225-0

Fluid-resistant elastomer No 30/14.2/5.9 202K132-25-0 222K132-25-0

*Size = as-supplied diameter both ends/recovered diameter connector end/recovered diameter cable end.




ACCESSORIES

High-Data-Rate Cables

Compact and Lightweight• Thin-wall technology

for smaller, lighter cables• 28 AWG to 22 AWG conductors

Versions for Common Protocols• Fast and Gigabit Ethernet in

Cat 5e and Quadrax configurations• IEEE 1394• USB

Rugged• Specialized TE developed polymer

formulations designed to support better mechanical and thermal performance in harsh environments

• State-of-the-art FAA approved foam dielectrics for better signal transmission

• Ruggedized zero halogen jacket for marine applications that passes the rigorous military standards for flammability while meeting stringent smoke and toxicity requirements

Customizable• Customizable to meet mission-

critical needs such as EMI, fluid resistance, and flammability

• Hybrid designs• Electrical testing capability,

including skew and eye patterns

Robust• Operating temperature range

from -55°C to +200°C• Full range of shielding options

for signal integrity

© 2015 TE Connectivity Ltd. family of companies. All Rights Reserved.

1-1773464-2 ADM 1.5M 10/2015

CeeLok FAS-T, SolderSleeve, ThermoGun, TE, TE Connectivity and the TE connectivity (logo) are trademarks of the TE Connectivity Ltd. family of companies.

Other product or company names mentioned herein may be trademarks of their respective owners.

While TE has made every reasonable effort to ensure the accuracy of the information herein, nothing herein constitutes any guarantee that such information is error-free, or any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. The TE entity issuing this publication reserves the right to make any adjustments to the information contained herein at any time without notice. All implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose are expressly disclaimed. The dimensions herein are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice.

Consult TE for the latest dimensions and design specifications.


For More Information

TE Technical Support CenterNorth America +1 800 522 6752

Asia Pacific +86 0 400 820 6015

Austria +43 1 905 601 228

Baltic Regions +46 8 5072 5000

Benelux +31 73 6246 999

Czech Republic +420 800 701 462

France +33 1 34 20 86 86

Germany +49 6251 133 1999

Hungary +36 809 874 04

Italy +39 011 401 2632

Nordic +46 8 5072 5000

Poland +48 800 702 309

Russia +7495 790 790 2

Spain/Portugal +34 93 2910366

Switzerland +41 52 633 66 26

United Kingdom +44 800 267 666

Follow us on Twitter for all the latest product news

@TEConnectivity, and on Facebook, TEConnectivity.

te.com

CEELOK FAS-T CONNECTORS - Farnell element14 · CeeLok FAS-T connectors offer a small form factor,...

Documents

Transcript of CEELOK FAS-T CONNECTORS - Farnell element14 · CeeLok FAS-T connectors offer a small form factor,...