We Supply Amfor flushable anode Cell used in electro coating

(ED) paint system with most types of paint. It serves as the opposition

electrode and simultaneously removes solubilizer (usually a common

organic acid) from the paint to maintain chemical balance. Anode

cell's anolyte injection systems distribute the anolyte evenly across

the anodes in anocel box and semi-circular. And the delivery system

in Anocel tubular cells increases dirt and oxygen removal by a

minimum factor of three over conventional designs.

CIRCULAR ANODE MEMBRANE CELLS

·

·

·

·

·

Safe and Esay Handing

Hard to Damage Design

Low Electrical Resistance

Quick and Easy Inspection

Procedure

Maintenance Friendly

Advantages

CED Accessories

ELECTRIC TERMINAL

ELECTROLYTE SUPPLY HOSE

ELECTRODE SS316MEMBRANE

P.P. PERFORATED PIPE

PROTECTIVE COVER CLOTH

ELECTROLYTEOUTLET

ACID MIGRATION ELECROLYTE FLOW

Pre-engineered and factory assembled package systems for circulating anolyte through the Cells (each Cell requires 2 to 3.6 lpm)

Includes:

Tanks: 304 SS or Polypropylene tanks from 120 to 300 Litres.

Pump: Sealless Magnetic Drive Polypropylene or CPVC pumps from 40 to 280 lpm with safety features.

Conductivity monitor/controller and solenoid valve for deionized water addition.

Ultraviolet Rays Bacterial disinfection system prior to discharge.

PN 16 U - PVC anolyte supply piping with flow control valve, check valve, bypass, and SS pressure gauge.

Drain valve, low level switch, and anolyte return filter

·

·

·

·

·

·

ANOLYTE CIRCULATION SYSTEMS:

3 Separation SystemsYour Purification Partner

3 Separation SystemsYour Purification Partner

Ultrafilters +

Electrophoretic

Electrocoating

Membranes

Anolyte Circulation

Instrumentation

105, Vakharia Industrial Estate

Ram Mandir Road, Goregaon (W)

Mumbai - 400104, INDIA.

Tel : +91-22-32201863

Cell: +91-98923 45754

3sepsys@gmail.com

www.separationsystems.in

3 Separation SystemsYour Purification Partner

System Includes :

·

·

·

·

·

·

·

·

·

·

Membranes : 4” & 8” High Flow PVDF

Membrane Housings: High Grade PVC/ SS

Automation :Control Panel with/without PLC

Pumping: Feed/Cleaning Pressure Pumps

CIP : 'Cleaning In Place' PP Tank for Membrane

Filtration: Bag Filters – S.S./PP Fabricated

Monitors: Pressure Monitors – Glycerin Filled

Flow Monitors - Digital & Rotameter

Switches: Pressure Switches

Level Switches

Piping: Std PVC/ PVC-U - +George Fischer+ or Equivalent

Stainless Steel - Fabricated.

Frame : S.S./ M.S. Powder Coated

Features :

System Construction

Clean In Place (CIP) System

Bag Filters

Frame

We designs systems to produce 10 lpm (2.5 gpm) +/- 10% from each 8” (8040) UF element. The system is manufactured to provide reliable, steady long-term performance, the customer avoids the frustration of unexpected system performance after start-up. Our systems are robust — an element can be taken off line for cleaning, replacement, or “rest” without placing stress on the remaining elements.

Our CIP has superior design features that make for reliable performance. A Flush and Drain valve is part of the clean return piping, allowing heavier paint solids to flow back to the ED tank and not into the CIP clean tank, thus saving paint solids. A low level switch installed inside the CIP tank will stop the pump when the tank's liquid level is below minimum tank depth to protect the pump from cavitations. The CIP is included with a solenoid valve also for DI water flow. UF membranes are also protected by a filter bag vessel installed in the CIP piping that removes dirt from the cleaning solution before it flows back into the UF Elements.

Our systems include individual bag filters (one filter for each Element), each with its own isolation valve(s). This is a standard feature with 2 membrane system also. So that bag filters can be serviced without interrupting paint flow to any Element. The use of several bag filters provides a duplex system where filtered paint is always being sent to the UF Elements.

The sturdy powder-coated frame is constructed to support the piping and UF Housings during shipment and operation at your plant

Optionals :

Cooling Coil

Process Instrumentation

Filter Bag & Housings

Deionization Plants

1 inch stainless steel serpentine coil cools cleaning solution, increasing cleaning cycle time by as much as one additional hour.

Digital Pressure Sensor - Conductivity meter - pH meter - Analog Temperature Gauge - Total Permeate flowmeter - Bypass Valves and Piping, and other process gauges can be installed on the UF System upon requested

We provide Clamping system Bag filter housing even standard swing bolt type vessels are also available, with filter bags available from 10 µ to 100 µ.

Pure water production plants like reverse osmosis, Demineralization and other similar water treatment and waste water treatment products are also core area of the company.

CED Ultrafilters

3 Separation SystemsYour Purification Partner

Features HF - 43 SW - 4020 SW - 4040

Lacquer Applications

Membrane

Membrane Make

Membrane Size

Permeate Rate(Ltrs per Hour)

Pump

Cartridge Housing

Cartridge

Pressure Guage

Piping

Polyeurahene/ Acrylic Base

Hollow Fibre

Koch, US

L : 43” D:3

60 - 75 LPH

1 hp, Lowara/ Ebara1 Phase/3 Phase

10” StandardPC

Wound/Spun10” Std

Yes

PVCStd. +GF+ or PRINCE

Polyeurahene/ Acrylic Base

Spiral Wound

Amfor, US

L : 20”

D:4”

60 - 75 LPH

1 hp, Lowara/ Ebara1 Phase/3 Phase

10” StandardPC

Wound/Spun10” Std

Yes

SS - Fabricated SS - Fabricated

Yes

Wound/Spun10” Std/Jumbo

10” Standard/JumboPC/PP

1.5 hp, Lowara/ Ebara

1 Phase/3 Phase

300 - 400 LPH

L : 40”D:4”

Amfor, US

Spiral Wound

Polyeurahene/ Acrylic Base

Optionals

Demineralization Plants Ion Exchanger Unit Cartridges/Hsg

Refractometer pH Meter Conductivity Meter

Electrophoretic Ultrafilters