CDRMax and APBS:Reducing and Reusing CO emission fromchemical industry

2

CPATENTED TECHNOLOGY FOR CO SEPARATION2

ARBON CLEAN SOLUTIONS LIMITED’S

Carbon Clean Solutions Limited (CCSL) has developed a patented solvent, APBSTM

TM

TM

TM

and advanced heat integrated process, CDRMax TM f 2a drop in replacement for aMDEA/MEA had been commercially proven

APBSTM SOLVENT

emissions within varied industrial segment. APBS™ can be swapped with most popular amine basedsolvent commonly known as MEA/aMDEA, with potential productivity improvements in Thermal Energyreduction, estimated in 20% range, apart from lower solvent degradation coupled with limiting corrosive

CDRMax™ PROCESS

CO recovery. The process technology adopts its advanced heat integration process which can enable

through the bottom of the absorbing section of the system which comes in contact with solvent comingfrom top of absorber. The solvent captures CO and leaves from bottom of absorber to stripper wheresolvent is regenerated through thermal energy and sent back to absorber. CO leaves from top of stripperhas >99% purity and can be used to produce fuels, sodium carbonate. Along with APBS solvent,

GasDr

CCSL has also developed a process, CDRMax™ that operates at atmospheric pressure enabling +95%

2

2

2

Reboiler

Cold Water

Cleared gas to atmosphere

CO pipelinecompressor

Flue gascooler

Cold Water

Cold Water

Blower

RichSolution L

Steam

eanSolution

2

COMPARISON WITH OTHER TECHNOLOGIES

OUR RANGE OF SERVICES1. Engineering and process license of CO separation process2. Long term operational support by means of a service contract3. Setting up analytical procedures for routine testing4. C

as well as solvent swapping cases.onsultation, planning and pre-feasibilit

ABOUT US CCSL was founded in 2009 and is an innovation leader in carbon dioxide separation technology for industrial

process to reduce the overall cost of separation of carbon dioxide. CCSL operates through

Positive Impact

Drop In Replacement

• Drop-in-replacement of conventional solvent at any site• +20% drop in thermal energy• Proven for power plants and natural gas applications

Lower corrosion &degradation

• 20 times less corrosion vs conventional solvent type chemicals• 10 times less degradation• Lower/negligible waste solvent disposal costs

No foaming, no chemicalmake-up, no waste

• No foaming leads to higher performance efficiency• ~50% reduction in ongoing chemical requirement and waste disposal costs

Lower Aerosols• Reduction in aerosols (micro chemical particles) emissions, exceeding environmental norms requirement.• Easier environmental approval, better performance

2

SALIENT FEATURES

• 27% reduction in energy consumption• 8 times reduction in loss of solvent• 7 times reduction in corrosion• 5 times reduction in chemical emissions

CONTACT US

Harsha Jayaram

+91 9819077979

harsha@carboncleansolutions.com

www.carboncleansolutions.com

• Chemical Industry It is used as a raw material in thechemical process especially for urea, soda ash andmethanol production.

• Fuels: Captured CO with hydrogen produced fromelectrolysis can be used for making fuels.

• Oil Wells Carbon dioxide is commonly injected into ornext to producing oil wells draw lost traces of crude oil.

• Bevera sed to make carbonated soft drinks and soda

• Solvent iquid CO is considered as a gooddissolving agent for many organic compounds.Here it can be used to remove ca eine from co ee.

• CO aser The CO laser, a common type of industrial

its use as an atmosphere for welding.

• Metals Industry It is used in the manufacture of

• Fumigation sed as a fumigant to increase shelf lifeand remove infestations

• Medicin In medicine, up to 5% CO is added to pureoxygen. This helps in provokingbreathing and tostabilize the O /CO balance in blood.

Applications of Captured Carbon Dioxide

2

2

2

2

2

2

2

2

2