CD catalogue 01 Abrasives - Central Dental
Transcript of CD catalogue 01 Abrasives - Central Dental
1
AB
RA
SIV
ES
C/D1. Purple Arbor Bands
Ceramic aluminum oxide mineral sharpens itself withuse. Lasts 2–4 times longer than traditional materials.4962-100 3/4” x 1/2” (100/pkg)
4942-10 3/4” x 1/2” (10/pkg)
SD-145 Mandrel (1) for 11/4” (1/2” shank)
BUFFALO DENTAL2 Silicon Detail Kit
Designed for trimming of silicone soft reline materials.62250 Intro kit (10 sleeves & 1 mandrel)
62255 Refill kit (10 grinding sleeves)
62260 Mandrel only
DEDECO3 Dia-Dome
Designed to replace standard 3/4” arbor bands.Made out of diamond. Dia-dome works fasterand lasts longer than arbor bands.2741 box (2) coarse
2742 box (2) fine
FOREDOM4 Typhoon Carbides
Typhoon carbide sleeve. Cuts rapidly without clogging.KB43522 sleeve fine mounted on mandrel
KB43525 sleeve coarse mounted on mandrel
ARBOR BANDS
1
3
2
4
2
AB
RA
SIV
ES ACRYLIC TRIMMERS & WHEELS
1 2 3
4 5 6 8
DEDECO1 Acrylic Trimmers & Wheels
White: for fast clog free trimming of acylics5101, 5102, 5104, 5105, 5106
5100 Assorted Pkg.
Red points: course for fast heatless trimming of acrylicsand soft reline.6101, 6102, 6104, 6105, 6106
Red wheels: for fast heatless trimming of acrylics andsoft liners 7/8 x 1/8”.5111 Box of 25
EDENTA2 EXA Technik
Made of silicon for adjusting and polishing acrylicchairside. Pkg. (6 or 100)Fine 0651 0652 0653 0654 0655 0656
Medium 0661 0662 0663 0664 0665 0666
Course 0671 0672 0673 0674 0675 0676
3 Soft CracksSoft reline wheels designed for trimming & finishing anysoft material including silicones, mouthguard & acrylicmaterials.2100UM-10 Pkg. of 10 with mandrel.
SCHUTZ4 Flexor Pre Polishers
Scotchbrite material for pre polishing soft reline andmouthguard materials. 7/8” diameter.658125 Pkg of 25
C/D5 Polishing Pat
Scotchbrite material for pre polishing of soft materials.7/8” diameter.04120 Hard Pkg. of 50
04121 Soft Pkg. of 50
KENDA7 Silicone Acrylic Polishers (not shown)
3459 #F8
3460 #F9
3461 #F14
FOREDOM8 Scotch Brite Acrylic Trimmers
Used for acrylic, soft reline and other materials.5584 Scotch Brite Wheel - 3”x1/2”x1/4” - Fine (1)
5587 Scotch Brite Wheel - 3”x1/2”x1/4” - Medium (1)
5588 Scotch Brite Wheel - 3”x1/2”x1/4” - Coarse (1)
5574 Scotch Brite Disc – 1”x1/4” – Fine (1)
5577 Scotch Brite Disc - 1”x1/4” – Medium (1)
5578 Scotch Brite Disc - 1”x1/4” – Coarse (1)
KEYSTONE9 Scotch-Brite Wheel (not shown)
Used for trimming soft materials. Soft reline, mouth guardmaterial, trays, etc.
1670009 Scotch-Brite Wheel – 3” (1)
3
AB
RA
SIV
ES
CUTOFF WHEELS
NATIONAL KEYSTONE1 Cuttoff wheels (Not Shown)
Top quality, high speed.Alumium Oxide cutoff wheels arenon-contaminating. Box (100)1900320 1 1/4” x .062 (thick)
1900310 1 1/2” x .040 (medium)
1900300 1 1/2” x .025 (thin)
DEDECO2 Cutoff wheels
For fast odour-free cutting & finishing of chrome cobaltmetals. Box (100)5163 1 1/4” x .025”
5168 1 1/4” x .032”
5166 1 1/4” x .049”
5165 1 1/4” x .062”
5164 1 1/4” x .082”
5169 1 1/2” x .032”
5167 1 1/2” x .049”
3 Rubi Slitters Discs (Not Shown)
Aluminum Oxide, for cutting non-precious andsemi-precious metal. Pkg.(100)5174 1 1/2” x .032”
5176 7/8” x .025” mini slitters
4 Lightning Red Wheels, 100pk (Not Shown)
Aluminum Oxide for faster cutting of chrome cobalt metals.7022 1 1/4” x .062”
7023 1 1/2” x .025”
7024 1 1/2” x .040”
TALLADIUM5 Wear-ever Discs
Aluminum oxide, fast cutting, long wearing, no odour,cutoff wheels (our best quality). Box (50)630-x 35mm x .7mm
631-x 25mm x .7mm
632-x 22mm x .6mm
633-x 35mm x 1.7mm (box 20 only)
KEYSTONE6 Econo Cutters
Fast cutting, long lasting. Econo cutters will cut anythingin the lab. Packaged individually, .035” thick.1300490 1 1/2” diameter
1300480 2 1/2” diameter
1300500 4” diameter
7 Econo Cutter MandrelSpecial mandrel for 2 1/2” & 4” Diameter Econo cutters.1300510
2
75 6
5163
5168
5166
5165
5164
5169
5167
1 1/4” 1 1/2”
Shown in actual shape and size.
4
AB
RA
SIV
ES LATHE WHEELS
C/D 1 Lathe Wheels
White knock down wheel. Long lasting, superior forgrinding plaster or bulk reduction of acrylic.302.1 3” x 1/4”
DENTSPLY2 Faskut lathe wheel
White abrasive wheel.99117A 3” x 3/8”
DEDECO LATHE WHEELS (Packed 1 per unit) 1/4” 3/8”
Green: Soft for fastest, heatless, chip-free grinding of porcelain teeth.The traditional favourite. 5122 5123
Black: Medium for fast, heatless, chip-free grinding of porcelain teeth. 5126 5127
Acrylic Base Plate Wheel: Coarse rubber-bonded wheel for fast clog-free trimming of base plates & acrylic dentures. 5137 5138
Green Medium: Medium rubber-bonded wheel for rapidly removing scratches from porcelain and metals. 5147 5148
White “Knock-Down”: Coarsest for trimming plaster and stone models; also suitable for acrylics. (lead center) 5161 5162
1 2
Shown in actual shape and size3” x 1/4”
(76•6.3mm)3” x 3/8”
(76•9.5mm
5
AB
RA
SIV
ES
HEATLESS WHEELS
KEYSTONE1 Mizzy Heatless Wheels
Available in white aluminum oxide or grey siliconcarbide. For fast cutting, non contaminating cutting ofmetal or porcelain. Pkg. (50)
Grey
Size 1 1” x 5mm 1900100
2 1” x 3mm 1900110
3 1” x 2mm 1900120
4 7/8” x 5mm 1900130
5 7/8” x 3mm 1900140
6 7/8” x 2mm 1900150
White
Size 1 1” x 5mm 1900241
2 1” x 3mm 1900242
3 1” x 2mm 1900243
4 1” x 5mm 1900244
5 1” x 3mm 1900245
6 1” x 2mm 1900246
DEDECO2 Koolies
Available in white, green or black, fast cutting, no clogbinder. Pkg. (50)
Black
Size 1 1” x 5mm 0801D
2 1” x 3mm 0802
3 1” x 2mm 0803
4 7/8” x 5mm 0804
5 7/8” x 3mm 0805
6 7/8” x 2mm 0806
White
Size 1 1” x 5mm 0831
2 1” x 3mm 0832
3 1” x 2mm 0833
4 7/8” x 5mm 0834
5 7/8” x 3mm 0835
6 7/8” x 2mm 0836
1 2
MANDRELS
BUFFALO DENTAL1 Arbor band mandrels
Individually packaged Rubber Head Only
1/4” 02930 03030
3/8” 02920 03020
3/4” 30560 02670
KEYSTONE2 Mandrels Pkg. (12)
514A High speed disc mandrel 1520051
516 Corkscrew point mandrel 1520041
512 Spiral mandrel 1520071
512B Spiral mandrel with Hex Nut 1520081
DIXON3 Snap-on Mandrels.
Specially made for Snap-on discs.10.740 (1 only)
DEDECO4 Hippie Mandrel (large)
Head for protection of fragile discs.5424 Pkg. (12)
1 32 4
6
AB
RA
SIV
ES RUBBER WHEELS & POINTS
DEDECO
“SQUARE-EDGE”Packed 100 per box
“KNIFE-EDGE”Packed 100 per box
“INTERPROXIMAL”Packed 25 and 100 per box
“CLASP” POLISHERSPacked 100 per box
15/16" x 1/4" 5/8" x 1/16" 7/8" x 1/8" 5/8" 7/8" 5/8" x .032" 7/8" x .042"(24•6.3mm) (15•1.5mm) (22•3.1mm) (15.8mm) (22.2mm) (15•0.8mm) (22•1.0mm)
25/bx 100/bx 25/bx 100/bx
Brown 4595 5030 5010 4982 4983 4988 5988 4989 5989
Black 4590 — 5000 4941 4940 4995 5995 4990 5990
Green 4592 5021 5001 4951 4950 4996 5996 4991 5991– Coarse
Blue 4593 5024 5004 4961 4960 4997 5997 4992 5992
Red Flexies 4594 5027 5007 4971 4970 4998 5998 4993 5993– FineWhite Flexies — 5029 5009 4981 4980 4999 5999 4994 5994– Fine
Grey 4591 — 5002 — — — — — —
Green — 5003 — — — — — —– FineRed Flexies — 5005 — — — — — — —– MediumGreen — 5026 5006 — — — — — —– Medium
Color key:BROWN (aluminum oxide) “Extra long-lasting” for “fastest” finishing and polishing of chrome cobalt, non-precious and
semi-precious metals. Uniquely capable of cutting or polishing depending upon the pressure used.“Non-contaminating.”
BLACK (silicon carbide) “Hard” for finishing and polishing chrome cobalt metals.
GREEN–COARSE (silicon carbide) “Standard” for scratch removal and polishing of chrome cobalt metals.
BLUE (silicon carbide) “Hi-glaze” for polishing non-precious, semi-precious and chrome cobalt metals.
RED FLEXIES–FINE (silicon carbide) “Soft” and “flexible” for “fine” polishing of gold.
WHITE FLEXIES (aluminum oxide) “Soft” and “flexible” for “ultra-fine” polishing of porcelain and gold.“Non-contaminating.”
GREY (silicon carbide) “Medium-hard” for finishing and polishing chrome cobalt metals.
GREEN–FINE (silicon carbide) “All purpose” metal polishing wheels.
RED FLEXIES–MEDIUM (aluminum oxide) For fast scratch removal and polishing of gold.
GREEN–MEDIUM (aluminum oxide) For fast finishing of all metals.
(Shown in actual shape and size)
7
AB
RA
SIV
ES
RUBBER WHEELS & POINTS
C/D1 Blue rubber wheels & clasp polishers
7/8” x 1/8” (silicon carbide) medium hardness forpolishing non precious alloy. Box (100)CD206 wheels
CD207 clasp polishers
2 Grey rubber wheels & clasp polishers 7/8” x 1/8” (silicon carbide) hard for finishing chromecobalt metals. Pkg. (100)CD201 wheels
CD202 clasp polishers
3 Brown MasterBond wheels & clasp polishers Long-lasting rubber wheels and clasp polishers.SW723-50 wheels (50/pkg)
SW725-50 clasp polishers (50/pkg)
KEYSTONE (Not Shown)
4 Superior grey pointsHard for finishing chrome cobalt metals. Pkg. (100)1640010 7/8” x 1/8”
5 Scotch Brite Polishing Wheels1670010 Scotch Brite Polishing Wheels – 4”
1670011 Scotch Brite Polishing Wheels – 3”
DENTORIUM (Not Shown)
6 Special Red Rubber Wheels & PointsGood for use on chrome.AB204 wheels 7/8” x 1/8” (100)
AB205 points (100)
RENFERT7 Polisoft
Effective polishing of precious and non-precious metal alloys.Optimum pre-polish alternative to rubber or silicone polishers.Quickly smoothes all metal surfaces.Virtually no dust or odourproduced. Surface is cooled due to porous nature.Achieves asilky matt shine. Long life-span.
91-0000 Polisoft Wheel – 22mmx3mm (50)
1 2 3 7
PUMICE
GARRECO1 Pumice
Pumice for smoothing without scratching.2016020 20 lb. Coarse
2016040 40 lb. Coarse
2 RESILIENCE Pumice SubstituteA new product for polishing acrylics. Cuts faster &smoother than pumice.2019010 10 lb. Pkg.
2019020 20 lb. Pkg.
ADS3 Pumice Deodorant
Pumice Deodorant & Disinfectant is a unique blend ofconcentrated, EPA registered, biocidal ingredientsdesigned to sanitize and deodorize. It destroysmicroorganisms and fungi that cause foul odors andslime, keeping the pumice area clean. Non-flammable andbiodegradable.Won't damage workpiece, acrylic teeth orcorrode pumice tray. Super concentrate: 1:32. Longlasting.Wet the pumice in the morning and forgetpumice odor all day. Fresh minty aroma.P946-3 Pumice Deodorant (4oz)
P946-6 Pumice Deodorant (1qt)
1 2 3
8
AB
RA
SIV
ES RUBBER WHEELS & POINTS
EDENTA1 Exa-Cerapol silicon polishers
For use on all ceramics. Excellent quality & value.Grey: for pre-polishing porcelain.
Pink: for hi-shine on porcelain.
0301-12 Pkg. (12) grey wheels
0301-100 Pkg. (100) grey wheels
0306-12 Pkg. (12) pink wheels
0306-100 Pkg. (100) pink wheels
0310-12 Pkg. (12) grey knife edge wheels
0310-100 Pkg. (100) grey knife edge wheels
0315-12 Pkg. (12) grey points
0315-100 Pkg. (100) grey points.
2 OcclupolFor occlusal polishing of precious & non precious alloys.1101 Pkg. (100) coarse brown
1102 Pkg. (100) medium red
1103A Pkg. (100) fine green
1107 occlupol mandrel
EDENTA3 Diagloss
Diamond impregnated polishers for hi-gloss finish ofcomposite materials.19042HP white K/E wheel (6 pkg.)
19043HP white wheel
19044HP white bullet
1942HP pink K/E wheel
1943HP pink wheel (6 pkg.)
1944HP pink bullet
4 Goldstar3 stage polishing system for precious & semi preciousalloys.1801 Pkg. (12) green prepolish wheel
1802-12 Pkg. (12) yellow medium polish wheel
1803-12 Pkg. (12) pink final polish wheel
SHOFU5 Silicone Polishers
Brownie, Greenie & super greenie points & wheels.0271 Pkg. (12) brownie wheel – knife edge
0272 Pkg. (12) greenie wheel
0273 Pkg. (12) brownie wheel
3
2
4
5
1
9
AB
RA
SIV
ES
RUBBER WHEELS & POINTS
PEARLADIA1 Diamond impregnated rubber polishers
For no-heat polishing on porcelain. Highly recommendedfor Procera and other all ceramic materials.S25C coarse knife/edge wheel
S25M medium knife/edge wheel
S25F fine knife/edge wheel
S20M medium thin wheel
S20F fine thin wheel
S20G super shine thin wheel
P12C coarse thick wheel
P12M medium thick wheel
P12F fine thick wheel
P12G super shine thick wheel
C/D2 Diapol diamond impregnated rubber
For no heat polishing of all porcelain. Excellent value.L26DG coarse knife/edge wheel
L26DXG x-coarse knife/edge extra
L26DMF medium knife/edge
L26F fine knife/edge
EDENTA3 Stargloss
Diamond particles embedded in an organic matrix.Great for all ceramic work. Blue – coarse; pink – medium;grey – superfine.R1520HP K/E Wheel Coarse
R1020HP Wheel Coarse
R2020HP Taper Coarse
R1530HP K/E Wheel Medium
R1030HP Wheel Medium
R2030HP Taper Medium
R1540HP K/E Wheel Fine
R1040HP Wheel Fine
R2040HP Taper Fine
EDENTA4 Cerapro
For contouring ceramic. Diamond embedded in ceramicbinder. Excellent for Zirconium.8001.050 Barrel
G8001.050 Barrel – Coarse
G8002.040 Taper
G8002.040 Taper – Coarse
8003.150 Wheel
8004.120 Cone
1
2
3
4
10
AB
RA
SIV
ES MOUNTED STONES
SHOFU DURAWHITE STONESAluminum oxide stones for finishing composites and porcelain. Pkg. (12)
SHOFU DURAGREEN STONESMade of high quality silicon carbide grits, Dura-Green Stones are rated exceptional for fast contouring and finishing porcelain,composites, gold, silver, and amalgam.These concentric, fast cutting stones come in HP and CA shank sizes.A select numberof shapes are available in FG shank.All are packaged one dozen of a kind to a box, with the most popular HP shapes alsoavailable in economical half-gross packages.
SHAPE CN1 CY2 CY3 CY4 FL1 FL2 FL3 FL4 FL5 IC1 IC2 IC3 IC4 IC5 IC6
HP (12) 0002 0006 0007 0008 0009 0010 0011 0012 0013 0014 0015 0016 0017 0018 0019
HP (72) HG10 HG14 HG16 HG18
CA (12) 0052 0056 0057 0058 0059 0060 0061 0062 0063 0064 0065 0066 0068 0069
FG (12) 0101 0103 0104 0105
SHAPE IC7 IC8 IC9 KN1 KN3 KN4 KN5 KN6 KN7 PC1 PC2 RD1 RD2 RD3 RD4
HP (12) 0020 0021 0022 0023 0025 0026 0027 0028 0029 0030 0031 0032 0033 0034 0035
HP (72) HG20 HG22 HG29
CA (12) 0073 0077 0080 0081 0082 0083 0084 0085
FG (12) 0106 0107 0108
SHAPE RE1 RE2 TC1 TC2 TC3 TC4 WH1 WH2 WH3 WH4 WH5 WH6
HP (12) 0036 0037 0039 0040S 0041 0042 0043 0044 0045 0046A 0047A 0048
HP (72) HG42 HG45 HG48
CA (12) 0086 0089 0090 0092 0093 0095 0096 0098
FG (12) 0109 0110
SHAPE CN1 FL1 FL2 FL3 IC4 KN3 RD1 RD2 RE1 TC1 TC4 WH4
HP 0201S 0202S 0203S 0204 0205 0206 0207 0208A 0209 0210 0211 0212
CA 0221 0222 0223 0224 0227 0228 0229 0230
FG 0241 0244 0245 0246 0247 0248 0249
11
AB
RA
SIV
ES
MOUNTED STONES
C/DGreen Stones
Silicone carbide mounted stones forfinishing porcelain, composites and gold.High Quality, good value. Packaged in12 or 100.89513 Pkg of 12 #19
89514 Pkg of 12 #42
89515 Pkg of 12 # 9
89516 Pkg of 12 #10
89517 Pkg of 12 #44
89518 Pkg of 12 #20
89519 Pkg of 12 #48
89520 Pkg of 12 #52
89521 Pkg of 12 #11
89522 Pkg of 12 #12
89523 Pkg of 12 #13
89525 Pkg of 12 #22
89526 Pkg of 12 #28
89527 Pkg of 12 #30
89528 Pkg of 12 #33
89530 Pkg of 12 # 3
89531 Pkg of 12 #53
SHOFULab Series Stones
These pure aluminum oxide stones come in three styles.
– White for finishing semi-precious and non-precious alloy.
– Pink for finishing precious metals.
– Coral for finishing chrome cobalt alloys
Shape No.1 No.2 No.3 No.4 No.5 No.6
White HP 1dz 461A 462A 463A 464A 465A 466A
HP 1/2 gr 0461 0462 0463 0464 0465 0466
Pink: HP 1dz 471A 472A 473A 474A 475A 476A
HP 1/2 gr 0471 0472 0473 0474 0475 0476
Coral: HP 1dz 481A 482A 483A 484A 485A 486A
HP 1/2 gr 0481 0482 0483 0484 0485 0486
12
AB
RA
SIV
ES
1 3 4
MODEL TRIMMER WHEELS & DISCS
C/D1 Diamond model trimmer wheel
Outlasts carboroundum wheels 10 to 1. Long-lastingdiamond stays sharp. Exceptional price.04106 10” diamond wheel
04108 12” diamond wheel
04109 12” diamond wheel double sided
RAY FOSTER2 Diamond model trimmer wheel (Not shown)
Trims models faster, quieter & is substantially longerlasting than regular wheels. Has second hole to fit Fostermodel trimmers.D910 10” diamond disc
D912 12” diamond disc
3 Carborundum model trimmer wheelsPrecision balanced for smooth running.They incorporate the spiral groove pattern which helpsprevent stone build-up & allows rapid cutting.E022 12” coarse
E21A 10” coarse
E22B 12” X-coarse
4 Adhesive model trimmer discsAdhesive model trimmer discs with coated abrasive.Fast-cutting, pressure sensitive adhesive disks.A025 12” coarse refill Pkg. (4)
A028 10” coarse refill Pkg. (6)
MESTRA5 Model Trimmer Wheels
080081-01 Diamond Disc (254mm)
080080-03 Silicon Carbide Disc (250mm)
NATIONAL KEYSTONE (Not shown)
6 Model trimmer self adhesive discsSuperior quality, will cut faster & quieter thancarborundum wheels.1900640 10” complete kit with 6 discs & plastic back-up wheel
1900650 10” refill kit with 6 discs only
1900660 10” plastic back-up wheel
1900680 12” complete kit with 4 discs & back-up wheel
1900690 12” refill kit with 4 discs only
1900700 12” plastic back-up wheel only
DEDECO7 Stickies
Velcro backed model trimmer discs. Quick changing,elemenates any down time while changing discs.Comes in coarse and standard grit.7062 10” kit complete coarse grit. (6 discs & velcro wheel)
7060 10” kit complete standard grit.
7063 10” refill kit coarse grit. (6 disc)
7061 10” refill kit standard grit.
7072 12” kit complete coarse grit. (4 disc & velcro wheel)
7070 12” kit complete standard kit
7073 12” refill kit coarse grit. (4 disc)
7071 12” refill kit standard grit.
BDM (Not shown)
8 Carborundum wheelAvailable in 10” & 12”, coarse & fine.61990 10” coarse
62000 10” fine
62030 12” coarse
62040 12” fine
7
13
AB
RA
SIV
ES
SEPARATING DISCS
NATIONAL KEYSTONE1 Ultra Thin Discs
Silicone carbide, thin, strong and fast cutting, designedfor fine cutting on porcelain interproximals and margins.7/8 x .0091300470 Box (25)
2 Dura Thin DiscAluminum oxide, thin, strong and fast cutting, designed forcutting and finishing ceramic metals. 7/8 x .0101300460 Box (25)
3 Veri Thin Disc (Not shown)
Silicone carbide, for cutting and finishing porcelain andgold. 7/8 x .0151300450 Box (50)
4 Joe Dandy DiscSilicon carbide, multi-purpose disc for use on porcelain,acrylic, gold and alloys. 7/8 x .0231300210 Box (100)
5 Red Flash DiscAluminum oxide, strong and fast for cutting chrome,precious and semi-precious alloys. 1” x .0251300430 Box (100)
DEDECO6 NM Slim
Silicone carbide, ultra thin Discs for porcelain or gold,non-contaminating – 7/8 x .0095172 Box (25)
5170 Box (50)
5171 Box (100)
7 A/O Thin DiscsAluminum oxide,ultra thin disc for gold,all metals.7/8 x .0095173 Box (25)
5183 Box (100)
8 Double-Sided DiscsSilicon carbide, multi purpose for use on porcelain,gold and enamel. 7/8 x .0255203 Box (100)
DIXON9 Sandpaper discs
Aluminum carbide, fits special square headed mandrel forquick change. Flexible backing allows accessibility to hardto reach areas. 7/8” diameter in three grits10.718 coarse Pkg. (100)
10.719 medium Pkg. (100)
10.720 fine Pkg. (100)
9
6
7 8
1,2 3,4,5
Easy to useEasy to trimLaboratory and Chairside UseRepairablePatented adhesive
1.800.268.4442
Yes. It’s really that good!TM
www.easysoftliner.com
Professional Kit Contents:2 x 50ml EasySoft Liner
50ml EasySoft liner Sealant
10ml EasySoft liner Adhesive
14x 6.5mm Mixing Tips
10x 3.2mm Mixing Tips
20 Disposable Brushes & Brush Holder
1 Brush holder
2 Polishing Discs & 1 Mandrel
To Order, Please Call:To Order, Please Call:
EasySoft ad.ai 1/13/09 4:19:36 PM