ROUTING

There are three types1-static routing 2-dynamic routing3-defult routing

STATIC ROUTING

If you have a one commpny. And if you want to cmmunncat the two different network..If you have the one router.You give the this command.

>no>enable#conf t#interface fastinternet 0/0#ip address 192.168.1.1 255.255.255.0#no shutdown#exit#interface siriol0/0/0#ip address 1.1.1.1 255.0.0.0#clock rate 64000#end#exit

AND OTHER SIDE OF ROUTER

>no>enable#conf t#interface fastinternet 0/0#ip address 192.168.2.2 255.255.255.0#no shutdown#exit#interface siriol0/0/0#ip address 1.1.1.2 255.0.0.0#no shutdown

NOW YOU ASSINE THE STATIC ROUTING

#conf t

#ip route second site of network address and subnet mask and seriol port of network addressMins#ip route 192.168.2.0 255.255.255.0 1.1.1.0#end AND NOW YOU GIVE THE SAME STATC ROUTING OF SECOND ROUTER

#conf t#ip route 192.168.1.0 255.255.255.0 1.1.1.0#endSo you can communicate the two different network THIS IS A STETIC ROUTING

DYNAMIC ROUTING

SAME SENARIO OF THE DYNAMIC ROUTING

#conf t#router rip#first side of the network address#first side router of network address#network 192.168.1.0#network 1.1.1.0#end

AND SAME SENARIO OF SECOND SITE OF ROUTER

#conf t#router rip#second side of the network address#second side router of network address#network 192.168.2.0#network 1.1.1.0#end

SO THIS IS A DYNAMIC ROUTING

BUT THIS A ROUTE RIP 1BUT ROUTER RIP 2 IS A DEFFRENT

Scopes you have the one of the public ip address so if you want to give the more pc of ip address of subnet mask will different.

So if you want to communicate the two the different subnet mask same but ip will different network addressSo you assine the route rip 2 routing

#conf t#route rip 2#network 192.168.1.0#network 1.1.1.0#end

AND SECOND SIDE OF ROUTER FOR SAME SENARIO#conf t#route rip 2#network 192.168.2.0#network 1.1.1.0#end

THIS IS A ROUTIPG RIP 2